target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca955x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18                 mdio-gpio0 = &mdio2;
  19                 label-mac-device = &eth0;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 led_power: power {
  26                         label = "tp-link:blue:power";
  27                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wlan2g {
  31                         label = "tp-link:blue:wlan2g";
  32                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy1tpt";
  34                 };
  35
  36                 wlan5g {
  37                         label = "tp-link:blue:wlan5g";
  38                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  39                         linux,default-trigger = "phy0tpt";
  40                 };
  41
  42                 lan_link {
  43                         label = "tp-link:green:lan_link";
  44                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 lan_data {
  48                         label = "tp-link:green:lan_data";
  49                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wps_blue {
  53                         label = "tp-link:blue:wps";
  54                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  55                 };
  56
  57                 wps_red {
  58                         label = "tp-link:red:wps";
  59                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  60                 };
  61         };
  62
  63         keys {
  64                 compatible = "gpio-keys";
  65
  66                 reset {
  67                         label = "Reset button";
  68                         linux,code = <KEY_RESTART>;
  69                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  70                         debounce-interval = <60>;
  71                 };
  72
  73                 leds {
  74                         label = "LED control button";
  75                         linux,code = <BTN_0>;
  76                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  77                         debounce-interval = <60>;
  78                 };
  79
  80                 wps {
  81                         label = "WPS button";
  82                         linux,code = <KEY_WPS_BUTTON>;
  83                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  84                         debounce-interval = <60>;
  85                 };
  86         };
  87
  88         mdio2: mdio {
  89                 compatible = "virtual,mdio-gpio";
  90
  91                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
  92                         <&gpio 1 GPIO_ACTIVE_HIGH>; /* MDIO */
  93                 #address-cells = <1>;
  94                 #size-cells = <0>;
  95
  96                 phy4: ethernet-phy@4 {
  97                         reg = <4>;
  98                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  99                 };
 100         };
 101 };
 102
 103 &pcie0 {
 104         status = "okay";
 105 };
 106
 107 &uart {
 108         status = "okay";
 109 };
 110
 111 &gpio {
 112         status = "okay";
 113 };
 114
 115 &spi {
 116         status = "okay";
 117         num-cs = <1>;
 118
 119         flash@0 {
 120                 compatible = "jedec,spi-nor";
 121                 reg = <0>;
 122                 spi-max-frequency = <25000000>;
 123
 124                 partitions {
 125                         compatible = "fixed-partitions";
 126                         #address-cells = <1>;
 127                         #size-cells = <1>;
 128
 129                         partition@0 {
 130                                 label = "u-boot";
 131                                 reg = <0x000000 0x020000>;
 132                                 read-only;
 133                         };
 134
 135                         partition@20000 {
 136                                 compatible = "tplink,firmware";
 137                                 label = "firmware";
 138                                 reg = <0x020000 0x5e0000>;
 139                         };
 140
 141                         partition@600000 {
 142                                 label = "partition-table";
 143                                 reg = <0x600000 0x010000>;
 144                                 read-only;
 145                         };
 146
 147                         info: partition@610000 {
 148                                 label = "info";
 149                                 reg = <0x610000 0x020000>;
 150                                 read-only;
 151                         };
 152
 153                         partition@630000 {
 154                                 label = "config";
 155                                 reg = <0x630000 0x1c0000>;
 156                                 read-only;
 157                         };
 158
 159                         art: partition@7f0000 {
 160                                 label = "art";
 161                                 reg = <0x7f0000 0x010000>;
 162                                 read-only;
 163                         };
 164                 };
 165         };
 166 };
 167
 168 &eth0 {
 169         status = "okay";
 170
 171         phy-handle = <&phy4>;
 172         pll-data = <0xa6000000 0x00000101 0x00001616>;
 173
 174         mtd-mac-address = <&info 0x8>;
 175 };
 176
 177 &wmac {
 178         status = "okay";
 179
 180         mtd-cal-data = <&art 0x1000>;
 181         mtd-mac-address = <&info 0x8>;
 182         mtd-mac-address-increment = <(-1)>;
 183 };