target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts

   1 #include "qcom-ipq8064-v2.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "TP-Link Archer VR2600v";
   7         compatible = "tplink,vr2600v", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0x1e000000>;
  11                 device_type = "memory";
  12         };
  13
  14         aliases {
  15                 mdio-gpio0 = &mdio0;
  16
  17                 led-boot = &power;
  18                 led-failsafe = &general;
  19                 led-running = &power;
  20                 led-upgrade = &general;
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys";
  25                 pinctrl-0 = <&button_pins>;
  26                 pinctrl-names = "default";
  27
  28                 wifi {
  29                         label = "wifi";
  30                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
  31                         linux,code = <KEY_RFKILL>;
  32                         debounce-interval = <60>;
  33                         wakeup-source;
  34                 };
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_RESTART>;
  40                         debounce-interval = <60>;
  41                         wakeup-source;
  42                 };
  43
  44                 wps {
  45                         label = "wps";
  46                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_WPS_BUTTON>;
  48                         debounce-interval = <60>;
  49                         wakeup-source;
  50                 };
  51
  52                 dect {
  53                         label = "dect";
  54                         gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_PHONE>;
  56                         debounce-interval = <60>;
  57                         wakeup-source;
  58                 };
  59
  60                 ledswitch {
  61                         label = "ledswitch";
  62                         gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
  63                         linux,code = <KEY_LIGHTS_TOGGLE>;
  64                         debounce-interval = <60>;
  65                         wakeup-source;
  66                 };
  67         };
  68
  69         leds {
  70                 compatible = "gpio-leds";
  71                 pinctrl-0 = <&led_pins>;
  72                 pinctrl-names = "default";
  73
  74                 dsl {
  75                         label = "white:dsl";
  76                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
  77                 };
  78
  79                 usb {
  80                         label = "white:usb";
  81                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
  82                 };
  83
  84                 lan {
  85                         label = "white:lan";
  86                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
  87                 };
  88
  89                 wlan2g {
  90                         label = "white:wlan2g";
  91                         gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
  92                 };
  93
  94                 wlan5g {
  95                         label = "white:wlan5g";
  96                         gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
  97                 };
  98
  99                 power: power {
 100                         label = "white:power";
 101                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 102                         default-state = "keep";
 103                 };
 104
 105                 phone {
 106                         label = "white:phone";
 107                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 108                 };
 109
 110                 wan {
 111                         label = "white:wan";
 112                         gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
 113                 };
 114
 115                 general: general {
 116                         label = "white:general";
 117                         gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
 118                 };
 119         };
 120 };
 121
 122 &qcom_pinmux {
 123         led_pins: led_pins {
 124                 mux {
 125                         pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
 126                                 "gpio26", "gpio53", "gpio56", "gpio66";
 127                         function = "gpio";
 128                         drive-strength = <2>;
 129                         bias-pull-up;
 130                 };
 131         };
 132
 133         button_pins: button_pins {
 134                 mux {
 135                         pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
 136                         function = "gpio";
 137                         drive-strength = <2>;
 138                         bias-pull-up;
 139                 };
 140         };
 141
 142         spi_pins: spi_pins {
 143                 mux {
 144                         pins = "gpio18", "gpio19", "gpio21";
 145                         function = "gsbi5";
 146                         bias-pull-down;
 147                 };
 148
 149                 data {
 150                         pins = "gpio18", "gpio19";
 151                         drive-strength = <10>;
 152                 };
 153
 154                 cs {
 155                         pins = "gpio20";
 156                         drive-strength = <10>;
 157                         bias-pull-up;
 158                 };
 159
 160                 clk {
 161                         pins = "gpio21";
 162                         drive-strength = <12>;
 163                 };
 164         };
 165 };
 166
 167 &gsbi5 {
 168         qcom,mode = <GSBI_PROT_SPI>;
 169         status = "okay";
 170
 171         spi4: spi@1a280000 {
 172                 status = "okay";
 173
 174                 pinctrl-0 = <&spi_pins>;
 175                 pinctrl-names = "default";
 176
 177                 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 178
 179                 W25Q128@0 {
 180                         compatible = "jedec,spi-nor";
 181                         #address-cells = <1>;
 182                         #size-cells = <1>;
 183                         spi-max-frequency = <50000000>;
 184                         reg = <0>;
 185
 186                         SBL1@0 {
 187                                 label = "SBL1";
 188                                 reg = <0x0 0x20000>;
 189                                 read-only;
 190                         };
 191
 192                         MIBIB@20000 {
 193                                 label = "MIBIB";
 194                                 reg = <0x20000 0x20000>;
 195                                 read-only;
 196                         };
 197
 198                         SBL2@40000 {
 199                                 label = "SBL2";
 200                                 reg = <0x40000 0x40000>;
 201                                 read-only;
 202                         };
 203
 204                         SBL3@80000 {
 205                                 label = "SBL3";
 206                                 reg = <0x80000 0x80000>;
 207                                 read-only;
 208                         };
 209
 210                         DDRCONFIG@100000 {
 211                                 label = "DDRCONFIG";
 212                                 reg = <0x100000 0x10000>;
 213                                 read-only;
 214                         };
 215
 216                         SSD@110000 {
 217                                 label = "SSD";
 218                                 reg = <0x110000 0x10000>;
 219                                 read-only;
 220                         };
 221
 222                         TZ@120000 {
 223                                 label = "TZ";
 224                                 reg = <0x120000 0x80000>;
 225                                 read-only;
 226                         };
 227
 228                         RPM@1a0000 {
 229                                 label = "RPM";
 230                                 reg = <0x1a0000 0x80000>;
 231                                 read-only;
 232                         };
 233
 234                         APPSBL@220000 {
 235                                 label = "APPSBL";
 236                                 reg = <0x220000 0x80000>;
 237                                 read-only;
 238                         };
 239
 240                         APPSBLENV@2a0000 {
 241                                 label = "APPSBLENV";
 242                                 reg = <0x2a0000 0x40000>;
 243                                 read-only;
 244                         };
 245
 246                         OLDART@2e0000 {
 247                                 label = "OLDART";
 248                                 reg = <0x2e0000 0x40000>;
 249                                 read-only;
 250                         };
 251
 252                         kernel@320000 {
 253                                 label = "kernel";
 254                                 reg = <0x320000 0x300000>;
 255                         };
 256
 257                         rootfs@620000 {
 258                                 label = "rootfs";
 259                                 reg = <0x620000 0x960000>;
 260                         };
 261
 262                         defaultmac: default-mac@0xfaf100 {
 263                                 label = "default-mac";
 264                                 reg = <0xfaf100 0x00200>;
 265                                 read-only;
 266                         };
 267
 268                         ART@fc0000 {
 269                                 label = "ART";
 270                                 reg = <0xfc0000 0x40000>;
 271                                 read-only;
 272                         };
 273                 };
 274         };
 275 };
 276
 277 &usb3_0 {
 278         status = "okay";
 279 };
 280
 281 &usb3_1 {
 282         status = "okay";
 283 };
 284
 285 &pcie0 {
 286         status = "okay";
 287 };
 288
 289 &pcie1 {
 290         status = "okay";
 291         max-link-speed = <1>;
 292 };
 293
 294 &mdio0 {
 295         status = "okay";
 296
 297         pinctrl-0 = <&mdio0_pins>;
 298         pinctrl-names = "default";
 299
 300         phy0: ethernet-phy@0 {
 301                 reg = <0>;
 302                 qca,ar8327-initvals = <
 303                         0x00004 0x7600000   /* PAD0_MODE */
 304                         0x00008 0x1000000   /* PAD5_MODE */
 305                         0x0000c 0x80        /* PAD6_MODE */
 306                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 307                         0x000e0 0xc74164de  /* SGMII_CTRL */
 308                         0x0007c 0x4e        /* PORT0_STATUS */
 309                         0x00094 0x4e        /* PORT6_STATUS */
 310                         >;
 311         };
 312
 313         phy4: ethernet-phy@4 {
 314                 reg = <4>;
 315         };
 316 };
 317
 318 &gmac1 {
 319         status = "okay";
 320         phy-mode = "rgmii";
 321         qcom,id = <1>;
 322
 323         pinctrl-0 = <&rgmii2_pins>;
 324         pinctrl-names = "default";
 325
 326         mtd-mac-address = <&defaultmac 0>;
 327         mtd-mac-address-increment = <1>;
 328
 329         fixed-link {
 330                 speed = <1000>;
 331                 full-duplex;
 332         };
 333 };
 334
 335 &gmac2 {
 336         status = "okay";
 337         phy-mode = "sgmii";
 338         qcom,id = <2>;
 339
 340         mtd-mac-address = <&defaultmac 0>;
 341
 342         fixed-link {
 343                 speed = <1000>;
 344                 full-duplex;
 345         };
 346 };
 347
 348 &adm_dma {
 349         status = "okay";
 350 };