target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch

   1 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
   2 +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
   3 @@ -8,6 +8,13 @@
   4         model = "Iomega StorCenter ix2-200";
   5         compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   6
   7 +       aliases {
   8 +               led-boot = &led_power;
   9 +               led-failsafe = &led_health;
  10 +               led-running = &led_power;
  11 +               led-upgrade = &led_health;
  12 +       };
  13 +
  14         memory {
  15                 device_type = "memory";
  16                 reg = <0x00000000 0x10000000>;
  17 @@ -127,16 +134,16 @@
  18                               &pmx_led_rebuild &pmx_led_health >;
  19                 pinctrl-names = "default";
  20
  21 -               power_led {
  22 +               led_power: power_led {
  23                         label = "status:white:power_led";
  24                         gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
  25 -                       default-state = "keep";
  26 +                       default-state = "on";
  27                 };
  28                 rebuild_led {
  29                         label = "status:white:rebuild_led";
  30                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  31                 };
  32 -               health_led {
  33 +               led_health: health_led {
  34                         label = "status:red:health_led";
  35                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  36                 };
  37 @@ -186,18 +193,18 @@
  38         };
  39
  40         partition@a0000 {
  41 -               label = "env";
  42 +               label = "u-boot environment";
  43                 reg = <0xa0000 0x20000>;
  44                 read-only;
  45         };
  46
  47         partition@100000 {
  48 -               label = "uImage";
  49 +               label = "kernel";
  50                 reg = <0x100000 0x300000>;
  51         };
  52
  53         partition@400000 {
  54 -               label = "rootfs";
  55 +               label = "ubi";
  56                 reg = <0x400000 0x1C00000>;
  57         };
  58  };
  59 @@ -211,7 +218,7 @@
  60  };
  61
  62  &eth0 {
  63 -       status = "okay";
  64 +       status = "disabled";
  65         ethernet0-port@0 {
  66                 speed = <1000>;
  67                 duplex = <1>;