target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   5
   6 / {
   7         compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
  11         };
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_red;
  16                 led-running = &power_green;
  17                 led-upgrade = &power_green;
  18
  19                 led-dsl = &broadband_green;
  20                 led-internet = &internet_green;
  21                 led-wifi = &wireless_green;
  22         };
  23
  24         memory@0 {
  25                 device_type = "memory";
  26                 reg = <0x0 0x4000000>;
  27         };
  28
  29         keys {
  30                 compatible = "gpio-keys-polled";
  31                 poll-interval = <100>;
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37                 eco {
  38                         label = "eco";
  39                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  40                         linux,code = <BTN_0>;
  41                 };
  42                 rfkill {
  43                         label = "rfkill";
  44                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_RFKILL>;
  46                 };
  47                 wps {
  48                         label = "wps";
  49                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_WPS_BUTTON>;
  51                 };
  52         };
  53
  54         leds {
  55                 compatible = "gpio-leds";
  56
  57                 eco {
  58                         label = "blue:eco";
  59                         gpios = <&stp 2 GPIO_ACTIVE_LOW>;
  60                 };
  61                 wps_red {
  62                         label = "red:wps";
  63                         gpios = <&stp 3 GPIO_ACTIVE_LOW>;
  64                 };
  65                 wps_green {
  66                         label = "green:wps";
  67                         gpios = <&stp 4 GPIO_ACTIVE_LOW>;
  68                 };
  69                 upgrade {
  70                         label = "blue:upgrade";
  71                         gpios = <&stp 5 GPIO_ACTIVE_LOW>;
  72                 };
  73                 tv {
  74                         label = "green:tv";
  75                         gpios = <&stp 6 GPIO_ACTIVE_LOW>;
  76                 };
  77                 internet_green: internet_green {
  78                         label = "green:internet";
  79                         gpios = <&stp 7 GPIO_ACTIVE_LOW>;
  80                 };
  81                 internet_red {
  82                         label = "red:internet";
  83                         gpios = <&stp 8 GPIO_ACTIVE_LOW>;
  84                 };
  85                 broadband_red {
  86                         label = "red:broadband";
  87                         gpios = <&stp 9 GPIO_ACTIVE_LOW>;
  88                 };
  89                 broadband_green: broadband_green {
  90                         label = "green:broadband";
  91                         gpios = <&stp 10 GPIO_ACTIVE_LOW>;
  92                 };
  93                 voice {
  94                         label = "green:voice";
  95                         gpios = <&stp 11 GPIO_ACTIVE_LOW>;
  96                 };
  97                 wireless_red {
  98                         label = "red:wireless";
  99                         gpios = <&stp 12 GPIO_ACTIVE_LOW>;
 100                 };
 101                 wireless_green: wireless_green {
 102                         label = "green:wireless";
 103                         gpios = <&stp 13 GPIO_ACTIVE_LOW>;
 104                 };
 105                 power_green: power2 {
 106                         label = "green:power";
 107                         gpios = <&stp 14 GPIO_ACTIVE_LOW>;
 108                         default-state = "keep";
 109                 };
 110                 power_red: power {
 111                         label = "red:power";
 112                         gpios = <&stp 15 GPIO_ACTIVE_LOW>;
 113                 };
 114         };
 115
 116         usb_vbus: regulator-usb-vbus {
 117                 compatible = "regulator-fixed";
 118
 119                 regulator-name = "USB_VBUS";
 120
 121                 regulator-min-microvolt = <5000000>;
 122                 regulator-max-microvolt = <5000000>;
 123
 124                 gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
 125                 enable-active-high;
 126         };
 127 };
 128
 129 &eth0 {
 130         mtd-mac-address = <&boardconfig 0x16>;
 131         mac-address-increment = <1>;
 132 };
 133
 134 &gphy0 {
 135         lantiq,gphy-mode = <GPHY_MODE_GE>;
 136 };
 137
 138 &gphy1 {
 139         lantiq,gphy-mode = <GPHY_MODE_GE>;
 140 };
 141
 142 &gpio {
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&state_default>;
 145
 146         state_default: pinmux {
 147                 pci-rst {
 148                         lantiq,pins = "io21";
 149                         lantiq,open-drain = <0>;
 150                         lantiq,pull = <0>;
 151                         lantiq,output = <1>;
 152                 };
 153         };
 154 };
 155
 156 &gswip {
 157         pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>;
 158         pinctrl-names = "default";
 159 };
 160
 161 &gswip_mdio {
 162         phy0: ethernet-phy@0 {
 163                 reg = <0x0>;
 164         };
 165         phy1: ethernet-phy@1 {
 166                 reg = <0x1>;
 167         };
 168         phy5: ethernet-phy@5 {
 169                 reg = <0x5>;
 170         };
 171         phy11: ethernet-phy@11 {
 172                 reg = <0x11>;
 173         };
 174         phy13: ethernet-phy@13 {
 175                 reg = <0x13>;
 176         };
 177 };
 178
 179 &gswip_ports {
 180         port@0 {
 181                 reg = <0>;
 182                 label = "lan4";
 183                 phy-mode = "rgmii";
 184                 phy-handle = <&phy0>;
 185         };
 186         port@1 {
 187                 reg = <1>;
 188                 label = "lan3";
 189                 phy-mode = "rgmii";
 190                 phy-handle = <&phy1>;
 191         };
 192         port@2 {
 193                 reg = <2>;
 194                 label = "lan2";
 195                 phy-mode = "internal";
 196                 phy-handle = <&phy11>;
 197         };
 198         port@4 {
 199                 reg = <4>;
 200                 label = "lan1";
 201                 phy-mode = "internal";
 202                 phy-handle = <&phy13>;
 203         };
 204         port@5 {
 205                 reg = <5>;
 206                 label = "wan";
 207                 phy-mode = "rgmii";
 208                 phy-handle = <&phy5>;
 209         };
 210 };
 211
 212 &localbus {
 213         flash@0 {
 214                 compatible = "lantiq,nor";
 215                 bank-width = <2>;
 216                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
 217
 218                 partitions {
 219                         compatible = "fixed-partitions";
 220                         #address-cells = <1>;
 221                         #size-cells = <1>;
 222
 223                         boardconfig: partition@40000 {
 224                                 label = "board_config";
 225                                 reg = <0x40000 0x10000>;
 226                                 read-only;
 227                         };
 228                 };
 229         };
 230 };
 231
 232 &pci0 {
 233         status = "okay";
 234         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 235
 236         wifi@1814,3091 {
 237                 compatible = "pci1814,3091";
 238                 reg = <0x7000 0 0 0 0>;
 239                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 240                 ralink,mtd-eeprom-swap;
 241                 mtd-mac-address = <&boardconfig 0x16>;
 242                 mac-address-increment = <1>;
 243         };
 244 };
 245
 246 &pcie0 {
 247         status = "disabled";
 248 };
 249
 250 &stp {
 251         status = "okay";
 252         lantiq,shadow = <0xffff>;
 253         lantiq,groups = <0x3>;
 254         /* lantiq,rising; */
 255 };
 256
 257 &usb_phy0 {
 258         status = "okay";
 259 };
 260
 261 &usb_phy1 {
 262         status = "okay";
 263 };
 264
 265 &usb0 {
 266         status = "okay";
 267         vbus-supply = <&usb_vbus>;
 268 };
 269
 270 &usb1 {
 271         status = "okay";
 272         vbus-supply = <&usb_vbus>;
 273 };
 274
 275 &vmmc {
 276         status = "okay";
 277         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
 278                  &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
 279                  &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
 280 };