target/linux/layerscape/image/armv7.mk

   1 #
   2 # Copyright 2018 NXP
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 define Device/Default
   9   PROFILES := Default
  10   FILESYSTEMS := squashfs
  11   IMAGES := firmware.bin
  12   KERNEL := kernel-bin | uImage none
  13   KERNEL_NAME := zImage
  14   KERNEL_LOADADDR := 0x80008000
  15   KERNEL_ENTRY_POINT := 0x80008000
  16 endef
  17
  18 define Device/ls1021atwr
  19   DEVICE_VENDOR := NXP
  20   DEVICE_MODEL := TWR-LS1021A
  21   DEVICE_VARIANT := Default
  22   DEVICE_PACKAGES += layerscape-rcw
  23   DEVICE_DTS := ls1021a-twr
  24   IMAGE/firmware.bin := \
  25     ls-clean | \
  26     ls-append $(1)-rcw.bin | pad-to 1M | \
  27     ls-append $(1)-uboot.bin | pad-to 3M | \
  28     ls-append $(1)-uboot-env.bin | pad-to 15M | \
  29     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  30     append-kernel | pad-to 32M | \
  31     append-rootfs | pad-rootfs | check-size 67108865
  32 endef
  33 TARGET_DEVICES += ls1021atwr
  34
  35 define Device/ls1021atwr-sdboot
  36   DEVICE_VENDOR := NXP
  37   DEVICE_MODEL := TWR-LS1021A
  38   DEVICE_VARIANT := SD Card Boot
  39   DEVICE_DTS := ls1021a-twr
  40   FILESYSTEMS := ext4
  41   IMAGES := sdcard.img
  42   IMAGE/sdcard.img := \
  43     ls-clean | \
  44     ls-append-sdhead $(1) | pad-to 4K | \
  45     ls-append $(1)-uboot.bin | pad-to 3M | \
  46     ls-append $(1)-uboot-env.bin | pad-to 15M | \
  47     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  48     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  49     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
  50 endef
  51 TARGET_DEVICES += ls1021atwr-sdboot
  52
  53 define Device/ls1021aiot-sdboot
  54   DEVICE_VENDOR := NXP
  55   DEVICE_MODEL := LS1021A-IoT
  56   DEVICE_VARIANT := SD Card Boot
  57   DEVICE_DTS := ls1021a-iot
  58   FILESYSTEMS := ext4
  59   IMAGES := sdcard.img
  60   IMAGE/sdcard.img := \
  61     ls-clean | \
  62     ls-append-sdhead $(1) | pad-to 4K | \
  63     ls-append $(1)-uboot.bin | pad-to 1M | \
  64     ls-append $(1)-uboot-env.bin | pad-to 15M | \
  65     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  66     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  67     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
  68 endef
  69 TARGET_DEVICES += ls1021aiot-sdboot