50b34520e386b3da8b85c56cecb03ec575cec074
[openwrt/staging/wigyori.git] / target / linux / layerscape / patches-5.4 / 701-net-0383-enetc-Set-MDIO_CFG_HOLD-to-the-recommended-value-of-.patch
1 From c0308743202449028d2b839d9b01d3d5ed2b210a Mon Sep 17 00:00:00 2001
2 From: Vladimir Oltean <vladimir.oltean@nxp.com>
3 Date: Wed, 27 Nov 2019 19:21:13 +0200
4 Subject: [PATCH] enetc: Set MDIO_CFG_HOLD to the recommended value of 2
5
6 This increases the MDIO hold time to 5 enet_clk cycles from the previous
7 value of 0. This is actually the out-of-reset value, that the driver was
8 previously overwriting with 0. Zero worked for the external MDIO, but
9 breaks communication with the internal MDIO buses on which the PCS of
10 ENETC SI's and Felix switch are found.
11
12 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
13 ---
14 drivers/net/ethernet/freescale/enetc/enetc_mdio.c | 12 ++++++++----
15 1 file changed, 8 insertions(+), 4 deletions(-)
16
17 --- a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
18 +++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
19 @@ -31,15 +31,19 @@ static inline void _enetc_mdio_wr(struct
20 _enetc_mdio_wr(mdio_priv, ENETC_##off, val)
21 #define enetc_mdio_rd_reg(off) enetc_mdio_rd(mdio_priv, off)
22
23 -#define ENETC_MDC_DIV 258
24 -
25 #define MDIO_CFG_CLKDIV(x) ((((x) >> 1) & 0xff) << 8)
26 #define MDIO_CFG_BSY BIT(0)
27 #define MDIO_CFG_RD_ER BIT(1)
28 +#define MDIO_CFG_HOLD(x) (((x) << 2) & GENMASK(4, 2))
29 #define MDIO_CFG_ENC45 BIT(6)
30 /* external MDIO only - driven on neg MDC edge */
31 #define MDIO_CFG_NEG BIT(23)
32
33 +#define ENETC_EMDIO_CFG \
34 + (MDIO_CFG_HOLD(2) | \
35 + MDIO_CFG_CLKDIV(258) | \
36 + MDIO_CFG_NEG)
37 +
38 #define MDIO_CTL_DEV_ADDR(x) ((x) & 0x1f)
39 #define MDIO_CTL_PORT_ADDR(x) (((x) & 0x1f) << 5)
40 #define MDIO_CTL_READ BIT(15)
41 @@ -61,7 +65,7 @@ int enetc_mdio_write(struct mii_bus *bus
42 u16 dev_addr;
43 int ret;
44
45 - mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
46 + mdio_cfg = ENETC_EMDIO_CFG;
47 if (regnum & MII_ADDR_C45) {
48 dev_addr = (regnum >> 16) & 0x1f;
49 mdio_cfg |= MDIO_CFG_ENC45;
50 @@ -108,7 +112,7 @@ int enetc_mdio_read(struct mii_bus *bus,
51 u16 dev_addr, value;
52 int ret;
53
54 - mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
55 + mdio_cfg = ENETC_EMDIO_CFG;
56 if (regnum & MII_ADDR_C45) {
57 dev_addr = (regnum >> 16) & 0x1f;
58 mdio_cfg |= MDIO_CFG_ENC45;