target/linux/ramips/dts/D105.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "D105", "ralink,rt3050-soc";
   7         model = "Huawei D105";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
  16                         ralink,gpiomux = "jtag";
  17                         ralink,uartmux = "gpio";
  18                         ralink,wdtmux = <1>;
  19                 };
  20
  21                 gpio0: gpio@600 {
  22                         status = "okay";
  23                 };
  24
  25         };
  26
  27         cfi@1f000000 {
  28                 compatible = "cfi-flash";
  29                 reg = <0x1f000000 0x800000>;
  30
  31                 bank-width = <2>;
  32                 device-width = <2>;
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35
  36                 partition@0 {
  37                         label = "u-boot";
  38                         reg = <0x0 0x30000>;
  39                         read-only;
  40                 };
  41
  42                 partition@30000 {
  43                         label = "u-boot-env";
  44                         reg = <0x30000 0x10000>;
  45                         read-only;
  46                 };
  47
  48                 factory: partition@40000 {
  49                         label = "factory";
  50                         reg = <0x40000 0x10000>;
  51                         read-only;
  52                 };
  53
  54                 partition@50000 {
  55                         label = "firmware";
  56                         reg = <0x50000 0x3b0000>;
  57                 };
  58         };
  59
  60         gpio-leds {
  61                 compatible = "gpio-leds";
  62                 power {
  63                         label = "d105:red:power";
  64                         gpios = <&gpio0 0 1>;
  65                 };
  66                 wps {
  67                         label = "d105:green:usb";
  68                         gpios = <&gpio0 13 1>;
  69                 };
  70         };
  71
  72         gpio-keys-polled {
  73                 compatible = "gpio-keys-polled";
  74                 #address-cells = <1>;
  75                 #size-cells = <0>;
  76                 poll-interval = <20>;
  77                 reset {
  78                         label = "reset";
  79                         gpios = <&gpio0 10 1>;
  80                         linux,code = <0x198>;
  81                 };
  82         };
  83
  84         ethernet@10100000 {
  85                 status = "okay";
  86         };
  87
  88         esw@10110000 {
  89                 status = "okay";
  90                 ralink,portmap = <0x2f>;
  91         };
  92
  93         wmac@10180000 {
  94                 status = "okay";
  95         };
  96
  97         otg@101c0000 {
  98                 status = "okay";
  99         };
 100 };