target/linux/ramips/dts/WL-330N3G.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
  10         model = "Asus WL-330N3G";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 3g {
  20                         label = "wl-330n3g:blue:3g";
  21                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 3g2 {
  25                         label = "wl-330n3g:red:3g";
  26                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 led_power: power {
  30                         label = "wl-330n3g:blue:power";
  31                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  32                 };
  33         };
  34
  35         gpio-keys-polled {
  36                 compatible = "gpio-keys-polled";
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39                 poll-interval = <20>;
  40
  41                 reset {
  42                         label = "reset";
  43                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46
  47                 wps {
  48                         label = "wps";
  49                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52         };
  53 };
  54
  55 &spi0 {
  56         status = "okay";
  57
  58         m25p80@0 {
  59                 #address-cells = <1>;
  60                 #size-cells = <1>;
  61                 compatible = "jedec,spi-nor";
  62                 reg = <0>;
  63                 spi-max-frequency = <10000000>;
  64
  65                 partition@0 {
  66                         label = "u-boot";
  67                         reg = <0x0 0x30000>;
  68                         read-only;
  69                 };
  70
  71                 partition@30000 {
  72                         label = "u-boot-env";
  73                         reg = <0x30000 0x10000>;
  74                         read-only;
  75                 };
  76
  77                 factory: partition@40000 {
  78                         label = "factory";
  79                         reg = <0x40000 0x10000>;
  80                         read-only;
  81                 };
  82
  83                 partition@50000 {
  84                         label = "firmware";
  85                         reg = <0x50000 0x3b0000>;
  86                 };
  87         };
  88 };
  89
  90 &pinctrl {
  91         state_default: pinctrl0 {
  92                 gpio {
  93                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  94                         ralink,function = "gpio";
  95                 };
  96         };
  97 };
  98
  99 &ethernet {
 100         mtd-mac-address = <&factory 0x4>;
 101 };
 102
 103 &esw {
 104         mediatek,portmap = <0x3e>;
 105 };
 106
 107 &wmac {
 108         ralink,mtd-eeprom = <&factory 0>;
 109 };
 110
 111 &otg {
 112         status = "okay";
 113 };