target/linux/ramips/dts/mt7620a_fon_fon2601.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "fon,fon2601", "ralink,mt7620a-soc";
  10         model = "Fon FON2601";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: power_r {
  23                         label = "red:power";
  24                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 internet_g {
  28                         label = "green:internet";
  29                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 net_g {
  33                         label = "green:net";
  34                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 wifi_g {
  38                         label = "green:wifi";
  39                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  40                 };
  41         };
  42
  43         keys {
  44                 compatible = "gpio-keys";
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51         };
  52 };
  53
  54 &spi0 {
  55         status = "okay";
  56
  57         flash@0 {
  58                 compatible = "jedec,spi-nor";
  59                 reg = <0>;
  60                 spi-max-frequency = <10000000>;
  61
  62                 partitions {
  63                         compatible = "fixed-partitions";
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66
  67                         partition@0 {
  68                                 label = "u-boot";
  69                                 reg = <0x0 0x30000>;
  70                                 read-only;
  71                         };
  72
  73                         partition@30000 {
  74                                 label = "u-boot-env";
  75                                 reg = <0x30000 0x10000>;
  76                                 read-only;
  77                         };
  78
  79                         factory: partition@40000 {
  80                                 label = "factory";
  81                                 reg = <0x40000 0x10000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@50000 {
  86                                 compatible = "openwrt,uimage", "denx,uimage";
  87                                 openwrt,padding = <32>;
  88                                 label = "firmware";
  89                                 reg = <0x50000 0xf90000>;
  90                         };
  91
  92                         partition@fe0000 {
  93                                 label = "board_data";
  94                                 reg = <0xfe0000 0x20000>;
  95                                 read-only;
  96                         };
  97                 };
  98         };
  99 };
 100
 101 &state_default {
 102         gpio {
 103                 groups = "i2c", "uartf";
 104                 function = "gpio";
 105         };
 106         nd_sd {
 107                 groups = "nd_sd";
 108                 function = "sd";
 109         };
 110         spi_cs {
 111                 groups = "spi refclk";
 112                 function = "spi refclk";
 113         };
 114 };
 115
 116 &ethernet {
 117         pinctrl-names = "default";
 118         pinctrl-0 = <&rgmii2_pins &mdio_pins>;
 119
 120         mtd-mac-address = <&factory 0x4>;
 121
 122         port@4 {
 123                 status = "okay";
 124                 phy-handle = <&phy4>;
 125                 phy-mode = "rgmii";
 126         };
 127
 128         mdio-bus {
 129                 status = "okay";
 130
 131                 phy4: ethernet-phy@4 {
 132                         reg = <4>;
 133                         phy-mode = "rgmii";
 134                 };
 135         };
 136 };
 137
 138 &gsw {
 139         mediatek,port4-gmac;
 140 };
 141
 142 &wmac {
 143         ralink,mtd-eeprom = <&factory 0x0>;
 144         pinctrl-names = "default";
 145         pinctrl-0 = <&pa_pins>, <&wled_pins>;
 146 };
 147
 148 &pcie {
 149         status = "okay";
 150 };
 151 &pcie0 {
 152         wifi@0,0 {
 153                 compatible = "pci14c3,7662";
 154                 reg = <0x0000 0 0 0 0>;
 155                 mediatek,mtd-eeprom = <&factory 0x8000>;
 156                 ieee80211-freq-limit = <5000000 6000000>;
 157         };
 158 };
 159
 160 &ehci {
 161         status = "okay";
 162 };
 163
 164 &ohci {
 165         status = "okay";
 166 };