target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts

   1 #include "mt7620a.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc";
   8         model = "TP-Link Archer C2 v1";
   9
  10         aliases {
  11                 led-boot = &led_wps;
  12                 led-failsafe = &led_wps;
  13                 led-running = &led_wps;
  14                 led-upgrade = &led_wps;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 lan {
  25                         label = "green:lan";
  26                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 usb {
  30                         label = "green:usb";
  31                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  32                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  33                         linux,default-trigger = "usbport";
  34                 };
  35
  36                 led_wps: wps {
  37                         label = "green:wps";
  38                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wan {
  42                         label = "green:wan";
  43                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wlan {
  47                         label = "green:wlan";
  48                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  49                         linux,default-trigger = "phy1tpt";
  50                 };
  51         };
  52
  53         keys {
  54                 compatible = "gpio-keys";
  55
  56                 reset_wps {
  57                         label = "reset_wps";
  58                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61
  62                 rfkill {
  63                         label = "rfkill";
  64                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_RFKILL>;
  66                 };
  67         };
  68
  69         rtl8367rb {
  70                 compatible = "realtek,rtl8367b", "rtl8367b";
  71                 cpu_port = <6>;
  72                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  73                 mii-bus = <&mdio0>;
  74         };
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <30000000>;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x0 0x20000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@20000 {
  97                                 compatible = "tplink,firmware";
  98                                 label = "firmware";
  99                                 reg = <0x20000 0x7a0000>;
 100                         };
 101
 102                         partition@7c0000 {
 103                                 label = "config";
 104                                 reg = <0x7c0000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         rom: partition@7d0000 {
 109                                 label = "rom";
 110                                 reg = <0x7d0000 0x10000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@7e0000 {
 115                                 label = "romfile";
 116                                 reg = <0x7e0000 0x10000>;
 117                                 read-only;
 118                         };
 119
 120                         radio: partition@7f0000 {
 121                                 label = "radio";
 122                                 reg = <0x7f0000 0x10000>;
 123                                 read-only;
 124                         };
 125                 };
 126         };
 127 };
 128
 129 &ethernet {
 130         pinctrl-names = "default";
 131         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 132
 133         mtd-mac-address = <&rom 0xf100>;
 134
 135         port@5 {
 136                 status = "okay";
 137                 mediatek,fixed-link = <1000 1 1 1>;
 138                 phy-mode = "rgmii";
 139         };
 140
 141         mdio0: mdio-bus {
 142                 status = "okay";
 143         };
 144 };
 145
 146 &gpio1 {
 147         status = "okay";
 148 };
 149
 150 &gpio2 {
 151         status = "okay";
 152 };
 153
 154 &gpio3 {
 155         status = "okay";
 156 };
 157
 158 &state_default {
 159         gpio {
 160                 groups = "i2c", "uartf", "wled", "ephy", "spi refclk";
 161                 function = "gpio";
 162         };
 163 };
 164
 165 &wmac {
 166         ralink,mtd-eeprom = <&radio 0x0>;
 167         mtd-mac-address = <&rom 0xf100>;
 168 };
 169
 170 &ehci {
 171         status = "okay";
 172 };
 173
 174 &ohci {
 175         status = "okay";
 176 };
 177
 178 &pcie {
 179         status = "okay";
 180 };
 181
 182 &pcie0 {
 183         mt76@0,0 {
 184                 reg = <0x0000 0 0 0 0>;
 185                 mediatek,mtd-eeprom = <&radio 0x8000>;
 186                 mtd-mac-address = <&rom 0xf100>;
 187                 mtd-mac-address-increment = <(-1)>;
 188         };
 189 };