target/linux/ramips/dts/mt7621_buffalo_wsr-600dhp.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "buffalo,wsr-600dhp", "mediatek,mt7621-soc";
   8         model = "Buffalo WSR-600DHP";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_power: power {
  21                         label = "green:power";
  22                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 wifi_o {
  26                         label = "orange:wifi";
  27                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 diag {
  31                         label = "orange:diag";
  32                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wifi_g {
  36                         label = "green:wifi";
  37                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 router_o {
  41                         label = "orange:router";
  42                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 router_g {
  46                         label = "green:router";
  47                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 internet_o {
  51                         label = "orange:internet";
  52                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 internet_g {
  56                         label = "green:internet";
  57                         gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         keys {
  62                 compatible = "gpio-keys";
  63
  64                 power {
  65                         label = "power";
  66                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  67                         linux,code = <KEY_POWER>;
  68                 };
  69
  70                 reset {
  71                         label = "reset";
  72                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_RESTART>;
  74                 };
  75
  76                 aoss {
  77                         label = "aoss";
  78                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_WPS_BUTTON>;
  80                 };
  81
  82                 auto {
  83                         label = "mode";
  84                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  85                         linux,code = <BTN_0>;
  86                         linux,input-type = <EV_SW>;
  87                 };
  88
  89                 ap {
  90                         label = "ap";
  91                         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  92                         linux,code = <BTN_0>;
  93                         linux,input-type = <EV_SW>;
  94                 };
  95
  96                 router {
  97                         label = "router";
  98                         gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
  99                         linux,code = <BTN_0>;
 100                         linux,input-type = <EV_SW>;
 101                 };
 102         };
 103
 104         gpio_poweroff {
 105                 compatible = "gpio-poweroff";
 106                 gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
 107         };
 108 };
 109
 110 &spi0 {
 111         status = "okay";
 112
 113         flash@0 {
 114                 compatible = "jedec,spi-nor";
 115                 reg = <0>;
 116                 spi-max-frequency = <10000000>;
 117
 118                 partitions {
 119                         compatible = "fixed-partitions";
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122
 123                         partition@0 {
 124                                 label = "u-boot";
 125                                 reg = <0x0 0x30000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@30000 {
 130                                 label = "u-boot-env";
 131                                 reg = <0x30000 0x10000>;
 132                                 read-only;
 133                         };
 134
 135                         factory: partition@40000 {
 136                                 compatible = "nvmem-cells";
 137                                 label = "factory";
 138                                 reg = <0x40000 0x10000>;
 139                                 #address-cells = <1>;
 140                                 #size-cells = <1>;
 141                                 read-only;
 142
 143                                 eeprom_factory_0: eeprom@0 {
 144                                         reg = <0x0 0x400>;
 145                                 };
 146
 147                                 macaddr_factory_4: macaddr@4 {
 148                                         reg = <0x4 0x6>;
 149                                 };
 150                         };
 151
 152                         partition@50000 {
 153                                 compatible = "denx,uimage";
 154                                 label = "firmware";
 155                                 reg = <0x50000 0xfb0000>;
 156                         };
 157                 };
 158         };
 159 };
 160
 161 &state_default {
 162         gpio {
 163                 groups = "i2c", "uart2", "uart3", "sdhci";
 164                 function = "gpio";
 165         };
 166 };
 167
 168 &pcie {
 169         status = "okay";
 170 };
 171
 172 &pcie0 {
 173         rt5592@0,0 {
 174                 reg = <0x0000 0 0 0 0>;
 175                 ralink,mtd-eeprom = <&factory 0x8000>;
 176         };
 177 };
 178
 179 &pcie1 {
 180         mt76@0,0 {
 181                 reg = <0x0000 0 0 0 0>;
 182                 nvmem-cells = <&eeprom_factory_0>;
 183                 nvmem-cell-names = "eeprom";
 184         };
 185 };
 186
 187 &gmac0 {
 188         nvmem-cells = <&macaddr_factory_4>;
 189         nvmem-cell-names = "mac-address";
 190 };
 191
 192 &gmac1 {
 193         status = "okay";
 194         label = "wan";
 195         phy-handle = <&ethphy4>;
 196
 197         nvmem-cells = <&macaddr_factory_4>;
 198         nvmem-cell-names = "mac-address";
 199 };
 200
 201 &mdio {
 202         ethphy4: ethernet-phy@4 {
 203                 reg = <4>;
 204         };
 205 };
 206
 207 &switch0 {
 208         ports {
 209                 port@0 {
 210                         status = "okay";
 211                         label = "lan1";
 212                 };
 213
 214                 port@1 {
 215                         status = "okay";
 216                         label = "lan2";
 217                 };
 218
 219                 port@2 {
 220                         status = "okay";
 221                         label = "lan3";
 222                 };
 223
 224                 port@3 {
 225                         status = "okay";
 226                         label = "lan4";
 227                 };
 228         };
 229 };
 230
 231 &xhci {
 232         status = "disabled";
 233 };