target/linux/ramips/dts/mt7621_winstars_ws-wn583a6.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "winstars,ws-wn583a6", "mediatek,mt7621-soc";
  10         model = "Winstars WS-WN583A6";
  11
  12         aliases {
  13                 led-boot = &led_status_red;
  14                 led-failsafe = &led_status_red;
  15                 led-running = &led_status_blue;
  16                 led-upgrade = &led_status_red;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 night_light_white {
  23                         label = "white:night_light";
  24                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  25                 };
  26
  27                 led_status_blue: status_blue {
  28                         label = "blue:status";
  29                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 status_amber {
  33                         label = "amber:status";
  34                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 led_status_red: status_red {
  38                         label = "red:status";
  39                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
  40                 };
  41         };
  42
  43         keys {
  44                 compatible = "gpio-keys";
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51
  52                 wps {
  53                         label = "wps";
  54                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_WPS_BUTTON>;
  56                 };
  57         };
  58 };
  59
  60 &spi0 {
  61         status = "okay";
  62
  63         flash@0 {
  64                 compatible = "jedec,spi-nor";
  65                 reg = <0>;
  66                 spi-max-frequency = <104000000>;
  67                 m25p,fast-read;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "bootloader";
  76                                 reg = <0x0 0x30000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@30000 {
  81                                 label = "config";
  82                                 reg = <0x30000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         factory: partition@40000 {
  87                                 label = "factory";
  88                                 reg = <0x40000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@50000 {
  93                                 compatible = "denx,uimage";
  94                                 label = "firmware";
  95                                 reg = <0x50000 0x7b0000>;
  96                         };
  97                 };
  98         };
  99 };
 100
 101 &pcie {
 102         status = "okay";
 103 };
 104
 105 &pcie0 {
 106         wifi@0,0 {
 107                 compatible = "mediatek,mt76";
 108                 reg = <0x0000 0 0 0 0>;
 109                 mediatek,mtd-eeprom = <&factory 0x0000>;
 110         };
 111 };
 112
 113 &pcie1 {
 114         wifi@0,0 {
 115                 compatible = "mediatek,mt76";
 116                 reg = <0x0000 0 0 0 0>;
 117                 mediatek,mtd-eeprom = <&factory 0x8000>;
 118         };
 119 };
 120
 121 &gmac0 {
 122         mtd-mac-address = <&factory 0xe000>;
 123 };
 124
 125 &switch0 {
 126         ports {
 127                 port@0 {
 128                         status = "okay";
 129                         label = "wan";
 130                         mtd-mac-address = <&factory 0xe006>;
 131                 };
 132
 133                 port@1 {
 134                         status = "okay";
 135                         label = "lan";
 136                 };
 137         };
 138 };
 139
 140 &state_default {
 141         gpio {
 142                 groups = "jtag", "wdt", "rgmii2";
 143                 function = "gpio";
 144         };
 145 };
 146
 147 &xhci {
 148         status = "disabled";
 149 };