treewide: remove dts-v1 identifier from DTSI files
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / mt7628an_alfa-network_awusfree1.dts
1 /*
2 * BSD LICENSE
3 *
4 * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of any
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33 /dts-v1/;
34
35 #include "mt7628an.dtsi"
36
37 #include <dt-bindings/gpio/gpio.h>
38 #include <dt-bindings/input/input.h>
39
40 / {
41 compatible = "alfa-network,awusfree1", "mediatek,mt7628an-soc";
42 model = "ALFA Network AWUSFREE1";
43
44 aliases {
45 led-boot = &led_system;
46 led-failsafe = &led_system;
47 led-running = &led_system;
48 led-upgrade = &led_system;
49 };
50
51 chosen {
52 bootargs = "console=ttyS0,115200";
53 };
54
55 keys {
56 compatible = "gpio-keys";
57
58 reset {
59 label = "reset";
60 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
61 linux,code = <KEY_RESTART>;
62 };
63 };
64
65 leds {
66 compatible = "gpio-leds";
67
68 led_system: system {
69 label = "awusfree1:orange:system";
70 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
71 };
72
73 wlan {
74 label = "awusfree1:blue:wlan";
75 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
76 };
77 };
78 };
79
80 &ehci {
81 status = "disabled";
82 };
83
84 &esw {
85 mediatek,portdisable = <0x1e>;
86 };
87
88 &ethernet {
89 mtd-mac-address = <&factory 0x2e>;
90 };
91
92 &gpio1 {
93 status = "okay";
94 };
95
96 &ohci {
97 status = "disabled";
98 };
99
100 &pinctrl {
101 state_default: pinctrl0 {
102 gpio {
103 ralink,group = "p0led_an", "wdt", "wled_an";
104 ralink,function = "gpio";
105 };
106
107 ext_lna {
108 ralink,group = "uart1";
109 ralink,function = "sw_r";
110 };
111
112 ext_pa {
113 ralink,group = "i2s";
114 ralink,function = "antenna";
115 };
116 };
117 };
118
119 &spi0 {
120 status = "okay";
121
122 m25p80@0 {
123 compatible = "jedec,spi-nor";
124 reg = <0>;
125 spi-max-frequency = <10000000>;
126
127 partitions {
128 compatible = "fixed-partitions";
129 #address-cells = <1>;
130 #size-cells = <1>;
131
132 partition@0 {
133 label = "u-boot";
134 reg = <0x0 0x30000>;
135 read-only;
136 };
137
138 partition@30000 {
139 label = "u-boot-env";
140 reg = <0x30000 0x1000>;
141 };
142
143 partition@31000 {
144 label = "config";
145 reg = <0x31000 0xf000>;
146 read-only;
147 };
148
149 factory: partition@40000 {
150 label = "factory";
151 reg = <0x40000 0x10000>;
152 read-only;
153 };
154
155 partition@50000 {
156 compatible = "denx,uimage";
157 label = "firmware";
158 reg = <0x50000 0x7b0000>;
159 };
160 };
161 };
162 };
163
164 &wmac {
165 status = "okay";
166 };