target/linux/ramips/dts/mt7628an_rakwireless_rak633.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "rakwireless,rak633", "mediatek,mt7628an-soc";
  11         model = "Rakwireless RAK633";
  12
  13         leds {
  14                 compatible = "gpio-leds";
  15
  16                 wifi {
  17                         label = "rak633:blue:wifi";
  18                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  19                 };
  20         };
  21 };
  22
  23 &pinctrl {
  24         state_default: pinctrl0 {
  25                 wled_an {
  26                         ralink,group = "wled_an";
  27                         ralink,function = "gpio";
  28                 };
  29         };
  30 };
  31
  32 &spi0 {
  33         status = "okay";
  34
  35         flash@0 {
  36                 compatible = "jedec,spi-nor";
  37                 reg = <0>;
  38                 spi-max-frequency = <10000000>;
  39
  40                 partitions {
  41                         compatible = "fixed-partitions";
  42                         #address-cells = <1>;
  43                         #size-cells = <1>;
  44
  45                         partition@0 {
  46                                 label = "u-boot";
  47                                 reg = <0x0 0x30000>;
  48                                 read-only;
  49                         };
  50
  51                         partition@30000 {
  52                                 label = "u-boot-env";
  53                                 reg = <0x30000 0x10000>;
  54                                 read-only;
  55                         };
  56
  57                         factory: partition@40000 {
  58                                 label = "factory";
  59                                 reg = <0x40000 0x10000>;
  60                                 read-only;
  61                         };
  62
  63                         partition@50000 {
  64                                 compatible = "denx,uimage";
  65                                 label = "firmware";
  66                                 reg = <0x50000 0x7b0000>;
  67                         };
  68                 };
  69         };
  70 };
  71
  72 &i2c {
  73         status = "okay";
  74 };
  75
  76 &i2s {
  77         status = "okay";
  78 };
  79
  80 &uart1 {
  81         status = "okay";
  82 };
  83
  84 &uart2 {
  85         status = "okay";
  86 };
  87
  88 &gdma {
  89         status = "okay";
  90 };
  91
  92 &ethernet {
  93         mtd-mac-address = <&factory 0x28>;
  94 };
  95
  96 &wmac {
  97         status = "okay";
  98         ralink,mtd-eeprom = <&factory 0x4>;
  99 };