target/linux/ramips/dts/mt7628an_tplink_tl-wr850n-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/leds/common.h>
   4
   5 #include "mt7628an_tplink_8m.dtsi"
   6
   7 / {
   8         compatible = "tplink,tl-wr850n-v2", "mediatek,mt7628an-soc";
   9         model = "TP-Link TL-WR850N v2";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys";
  20
  21                 reset {
  22                         label = "reset";
  23                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  24                         linux,code = <KEY_RESTART>;
  25                 };
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30
  31                 led_power: power {
  32                         function = LED_FUNCTION_POWER;
  33                         color = <LED_COLOR_ID_GREEN>;
  34                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 wps {
  38                         function = LED_FUNCTION_WPS;
  39                         color = <LED_COLOR_ID_GREEN>;
  40                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 lan {
  44                         function = LED_FUNCTION_LAN;
  45                         color = <LED_COLOR_ID_GREEN>;
  46                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wan {
  50                         function = LED_FUNCTION_WAN;
  51                         color = <LED_COLOR_ID_GREEN>;
  52                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wlan {
  56                         function = LED_FUNCTION_WLAN;
  57                         color = <LED_COLOR_ID_GREEN>;
  58                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "phy0tpt";
  60                 };
  61         };
  62 };
  63
  64 &ehci {
  65         status = "disabled";
  66 };
  67
  68 &ohci {
  69         status = "disabled";
  70 };
  71
  72 &state_default {
  73         gpio {
  74                 groups = "p0led_an", "p2led_an", "perst", "refclk", "wdt", "wled_an";
  75                 function = "gpio";
  76         };
  77 };
  78
  79 &wmac {
  80         status = "okay";
  81
  82         nvmem-cells = <&eeprom_factory_20000>, <&macaddr_factory_f100 0>;
  83         nvmem-cell-names = "eeprom", "mac-address";
  84 };
  85
  86 &esw {
  87         mediatek,portmap = <0x3e>;
  88 };