target/linux/ramips/dts/rt3050_edimax_3g-6200nl.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/leds/common.h>
   6 #include <dt-bindings/mtd/partitions/uimage.h>
   7
   8 / {
   9         compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
  10         model = "Edimax 3g-6200nl";
  11
  12         aliases {
  13                 led-boot = &led_internet;
  14                 led-failsafe = &led_internet;
  15                 led-running = &led_internet;
  16                 led-upgrade = &led_internet;
  17         };
  18
  19         flash@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "u-boot-env";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         factory: partition@40000 {
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46
  47                                 nvmem-layout {
  48                                         compatible = "fixed-layout";
  49                                         #address-cells = <1>;
  50                                         #size-cells = <1>;
  51
  52                                         eeprom_factory_0: eeprom@0 {
  53                                                 reg = <0x0 0x200>;
  54                                         };
  55
  56                                         macaddr_factory_4: macaddr@4 {
  57                                                 reg = <0x4 0x6>;
  58                                         };
  59                                 };
  60                         };
  61
  62                         partition@3e0000 {
  63                                 label = "cimage";
  64                                 reg = <0x3e0000 0x20000>;
  65                                 read-only;
  66                         };
  67
  68                         partition@50000 {
  69                                 compatible = "openwrt,uimage", "denx,uimage";
  70                                 openwrt,offset = <FW_EDIMAX_OFFSET>;
  71                                 openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
  72                                 label = "firmware";
  73                                 reg = <0x50000 0x390000>;
  74                         };
  75                 };
  76         };
  77
  78         leds {
  79                 compatible = "gpio-leds";
  80
  81                 led_internet: internet {
  82                         label = "green:internet";
  83                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 wlan {
  87                         function = LED_FUNCTION_WLAN;
  88                         color = <LED_COLOR_ID_GREEN>;
  89                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  90                 };
  91         };
  92
  93         keys {
  94                 compatible = "gpio-keys-polled";
  95                 poll-interval = <20>;
  96
  97                 reset {
  98                         label = "reset";
  99                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_RESTART>;
 101                 };
 102         };
 103 };
 104
 105 &state_default {
 106         gpio {
 107                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 108                 function = "gpio";
 109         };
 110 };
 111
 112 &ethernet {
 113         nvmem-cells = <&macaddr_factory_4>;
 114         nvmem-cell-names = "mac-address";
 115 };
 116
 117 &esw {
 118         mediatek,portdisable = <0x37>;
 119 };
 120
 121 &wmac {
 122         nvmem-cells = <&eeprom_factory_0>;
 123         nvmem-cell-names = "eeprom";
 124 };
 125
 126 &otg {
 127         status = "okay";
 128 };