target/linux/ramips/dts/rt3052_zyxel_keenetic.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "zyxel,keenetic", "ralink,rt3052-soc";
   8         model = "ZyXEL Keenetic";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         flash@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x800000>;
  20                 bank-width = <2>;
  21                 device-width = <2>;
  22
  23                 partitions {
  24                         compatible = "fixed-partitions";
  25                         #address-cells = <1>;
  26                         #size-cells = <1>;
  27
  28                         partition@0 {
  29                                 label = "u-boot";
  30                                 reg = <0x0 0x30000>;
  31                                 read-only;
  32                         };
  33
  34                         partition@30000 {
  35                                 label = "u-boot-env";
  36                                 reg = <0x30000 0x10000>;
  37                                 read-only;
  38                         };
  39
  40                         factory: partition@40000 {
  41                                 label = "factory";
  42                                 reg = <0x40000 0x10000>;
  43                                 read-only;
  44
  45                                 nvmem-layout {
  46                                         compatible = "fixed-layout";
  47                                         #address-cells = <1>;
  48                                         #size-cells = <1>;
  49
  50                                         eeprom_factory_0: eeprom@0 {
  51                                                 reg = <0x0 0x200>;
  52                                         };
  53
  54                                         macaddr_factory_28: macaddr@28 {
  55                                                 reg = <0x28 0x6>;
  56                                         };
  57                                 };
  58                         };
  59
  60                         partition@50000 {
  61                                 compatible = "denx,uimage";
  62                                 label = "firmware";
  63                                 reg = <0x50000 0x7b0000>;
  64                         };
  65                 };
  66         };
  67
  68         leds {
  69                 compatible = "gpio-leds";
  70
  71                 led_power: power {
  72                         label = "green:power";
  73                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 usb {
  77                         label = "green:usb";
  78                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  79                         trigger-sources = <&otg_port1>;
  80                         linux,default-trigger = "usbport";
  81                 };
  82
  83                 wps {
  84                         label = "green:wps";
  85                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  86                 };
  87         };
  88
  89         keys {
  90                 compatible = "gpio-keys-polled";
  91                 poll-interval = <20>;
  92
  93                 reset {
  94                         label = "reset";
  95                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_RESTART>;
  97                 };
  98
  99                 rfkill {
 100                         label = "rfkill";
 101                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 102                         linux,code = <KEY_RFKILL>;
 103                         linux,input-type = <EV_SW>;
 104                 };
 105
 106                 wps {
 107                         label = "wps";
 108                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_WPS_BUTTON>;
 110                 };
 111         };
 112 };
 113
 114 &state_default {
 115         gpio {
 116                 groups = "uartf";
 117                 function = "gpio";
 118         };
 119 };
 120
 121 &ethernet {
 122         nvmem-cells = <&macaddr_factory_28>;
 123         nvmem-cell-names = "mac-address";
 124 };
 125
 126 &esw {
 127         mediatek,portmap = <0x2f>;
 128 };
 129
 130 &wmac {
 131         nvmem-cells = <&eeprom_factory_0>;
 132         nvmem-cell-names = "eeprom";
 133 };
 134
 135 &otg {
 136         status = "okay";
 137 };