target/linux/ramips/dts/rt3883_trendnet_tew-692gr.dts

   1 #include "rt3883.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "trendnet,tew-692gr", "ralink,rt3883-soc";
   8         model = "TRENDnet TEW-692GR";
   9
  10         aliases {
  11                 led-boot = &led_wps_green;
  12                 led-failsafe = &led_wps_green;
  13                 led-running = &led_wps_green;
  14                 led-upgrade = &led_wps_green;
  15         };
  16
  17         flash@1c000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1c000000 0x800000>;
  20                 bank-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 reg = <0x0 0x0030000>;
  29                                 label = "u-boot";
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 reg = <0x00030000 0x00010000>;
  35                                 label = "u-boot-env";
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 reg = <0x00040000 0x00010000>;
  41                                 label = "factory";
  42                                 read-only;
  43                         };
  44
  45                         partition@50000 {
  46                                 compatible = "denx,uimage";
  47                                 reg = <0x00050000 0x007b0000>;
  48                                 label = "firmware";
  49                         };
  50                 };
  51         };
  52
  53         keys {
  54                 compatible = "gpio-keys-polled";
  55                 poll-interval = <100>;
  56
  57                 reset {
  58                         label = "reset";
  59                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_RESTART>;
  61                 };
  62
  63                 wps {
  64                         label = "wps";
  65                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_WPS_BUTTON>;
  67                 };
  68         };
  69
  70         leds {
  71                 compatible = "gpio-leds";
  72
  73                 wps {
  74                         label = "tew-692gr:orange:wps";
  75                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 led_wps_green: wps2 {
  79                         label = "tew-692gr:green:wps";
  80                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
  81                 };
  82         };
  83 };
  84
  85 &gpio1 {
  86         status = "okay";
  87 };
  88
  89 &state_default {
  90         gpio {
  91                 groups = "spi", "i2c", "jtag", "uartf";
  92                 function = "gpio";
  93         };
  94 };
  95
  96 &ethernet {
  97         status = "okay";
  98         mtd-mac-address = <&factory 0x4>;
  99
 100         port@0 {
 101                 phy-handle = <&phy0>;
 102                 phy-mode = "rgmii";
 103         };
 104
 105         mdio-bus {
 106                 status = "okay";
 107
 108                 phy0: ethernet-phy@0 {
 109                         reg = <0>;
 110                         phy-mode = "rgmii";
 111
 112                         qca,ar8327-initvals = <
 113                                 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 114                                 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 115                                 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
 116                                 0x50 0xc437c437 /* LED Control Register 0 */
 117                                 0x54 0xc337c337 /* LED Control Register 1 */
 118                                 0x58 0x00000000 /* LED Control Register 2 */
 119                                 0x5c 0x03ffff00 /* LED Control Register 3 */
 120                                 0x7c 0x0000007e /* PORT0_STATUS */
 121                                 0x94 0x0000007e /* PORT6 STATUS */
 122                         >;
 123                 };
 124         };
 125 };
 126
 127 &pci {
 128         status = "okay";
 129 };
 130
 131 &pci1 {
 132         status = "okay";
 133
 134         wifi@0,0 {
 135                 compatible = "pci0,0";
 136                 reg = < 0x10000 0 0 0 0 >;
 137                 ralink,2ghz = <0>;
 138         };
 139 };
 140
 141 &wmac {
 142         status = "okay";
 143         ralink,mtd-eeprom = <&factory 0x0>;
 144         ralink,5ghz = <0>;
 145         mtd-mac-address = <&factory 0x4>;
 146         mtd-mac-address-increment = <3>;
 147 };