PKG_NAME:=tfa-layerscape
PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/atf
$(INSTALL_BIN) $(HOST_BUILD_DIR)/plat/nxp/tools/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
endef
-define Package/tfa-layerscape/ls1012afrdm
+define Package/tfa-generic
+ SECTION:=boot
+ CATEGORY:=Boot Loaders
+ DEPENDS:=@TARGET_layerscape_armv8_64b +layerscape-rcw +u-boot-fsl_$(subst tfa-,,$(1))
+ VARIANT:=$(subst tfa-,,$(1))
+endef
+
+define Package/tfa-ls1012a-frdm
+ $(Package/tfa-generic)
TITLE:=NXP LS1012AFRDM Trusted Firmware
PLAT:=ls1012afrdm
BOOT_MODE:=qspi
- BIN_BL2:=build/ls1012afrdm/release/bl2_qspi.pbl
- BIN_FIP:=build/ls1012afrdm/release/fip.bin
endef
-define Package/tfa-layerscape/ls1012ardb
+define Package/tfa-ls1012a-rdb
+ $(Package/tfa-generic)
TITLE:=NXP LS1012ARDB Trusted Firmware
PLAT:=ls1012ardb
BOOT_MODE:=qspi
- BIN_BL2:=build/ls1012ardb/release/bl2_qspi.pbl
- BIN_FIP:=build/ls1012ardb/release/fip.bin
endef
-define Package/tfa-layerscape/ls1012afrwy
+define Package/tfa-ls1012a-frwy-sdboot
+ $(Package/tfa-generic)
TITLE:=NXP LS1012AFRWY Trusted Firmware
PLAT:=ls1012afrwy
BOOT_MODE:=qspi
- BIN_BL2:=build/ls1012afrwy/release/bl2_qspi.pbl
- BIN_FIP:=build/ls1012afrwy/release/fip.bin
endef
-define Package/tfa-layerscape/ls1043ardb
+define Package/tfa-ls1043a-rdb
+ $(Package/tfa-generic)
TITLE:=NXP LS1043ARDB Trusted Firmware
PLAT:=ls1043ardb
BOOT_MODE:=nor
- BIN_BL2:=build/ls1043ardb/release/bl2_nor.pbl
- BIN_FIP:=build/ls1043ardb/release/fip.bin
endef
-define Package/tfa-layerscape/ls1043ardb-sdboot
+define Package/tfa-ls1043a-rdb-sdboot
+ $(Package/tfa-generic)
TITLE:=NXP LS1043ARDB SD Boot Trusted Firmware
PLAT:=ls1043ardb
BOOT_MODE:=sd
- BIN_BL2:=build/ls1043ardb/release/bl2_sd.pbl
- BIN_FIP:=build/ls1043ardb/release/fip.bin
endef
-define Package/tfa-layerscape/ls1046ardb
+define Package/tfa-ls1046a-rdb
+ $(Package/tfa-generic)
TITLE:=NXP LS1046ARDB Trusted Firmware
PLAT:=ls1046ardb
BOOT_MODE:=qspi
- BIN_BL2:=build/ls1046ardb/release/bl2_qspi.pbl
- BIN_FIP:=build/ls1046ardb/release/fip.bin
endef
-define Package/tfa-layerscape/ls1046ardb-sdboot
+define Package/tfa-ls1046a-rdb-sdboot
+ $(Package/tfa-generic)
TITLE:=NXP LS1046ARDB SD Boot Trusted Firmware
PLAT:=ls1046ardb
BOOT_MODE:=sd
- BIN_BL2:=build/ls1046ardb/release/bl2_sd.pbl
- BIN_FIP:=build/ls1046ardb/release/fip.bin
endef
-define Package/tfa-layerscape/ls1088ardb
+define Package/tfa-ls1088a-rdb
+ $(Package/tfa-generic)
TITLE:=NXP LS1088ARDB Trusted Firmware
PLAT:=ls1088ardb
BOOT_MODE:=qspi
- BIN_BL2:=build/ls1088ardb/release/bl2_qspi.pbl
- BIN_FIP:=build/ls1088ardb/release/fip.bin
endef
-define Package/tfa-layerscape/ls1088ardb-sdboot
+define Package/tfa-ls1088a-rdb-sdboot
+ $(Package/tfa-generic)
TITLE:=NXP LS1088ARDB SD Boot Trusted Firmware
PLAT:=ls1088ardb
BOOT_MODE:=sd
- BIN_BL2:=build/ls1088ardb/release/bl2_sd.pbl
- BIN_FIP:=build/ls1088ardb/release/fip.bin
endef
-define Package/tfa-layerscape/ls2088ardb
+define Package/tfa-ls2088a-rdb
+ $(Package/tfa-generic)
TITLE:=NXP LS2088ARDB Trusted Firmware
PLAT:=ls2088ardb
BOOT_MODE:=nor
- BIN_BL2:=build/ls2088ardb/release/bl2_nor.pbl
- BIN_FIP:=build/ls2088ardb/release/fip.bin
-endef
-
-define Package/tfa-layerscape/Config
- define Package/tfa-$(1)
- SECTION:=boot
- CATEGORY:=Boot Loaders
- TITLE:=$(2)
- DEPENDS:=@TARGET_layerscape_armv8_64b +layerscape-rcw +u-boot-$(1)
- VARIANT:=$(1)
- BIN_BL2:=$(3)
- BIN_FIP:=$(4)
- endef
endef
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
- $(CP) $(PKG_BUILD_DIR)/$(BIN_BL2) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-bl2.pbl
- $(CP) $(PKG_BUILD_DIR)/$(BIN_FIP) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-fip.bin
+ $(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/bl2_$(BOOT_MODE).pbl \
+ $(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-bl2.pbl
+ $(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/fip.bin \
+ $(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-fip.bin
endef
define Build/Compile
- $(eval $(Package/tfa-layerscape/$(BUILD_VARIANT))) \
+ $(eval $(Package/tfa-$(BUILD_VARIANT))) \
$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE=$(TARGET_CROSS) \
fip pbl PLAT=$(PLAT) BOOT_MODE=$(BOOT_MODE) \
- RCW=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-rcw.bin \
- BL33=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot.bin \
+ RCW=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-rcw.bin \
+ BL33=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-uboot.bin \
FIPTOOL=$(STAGING_DIR_HOST)/bin/tfa-fiptool \
CREATE_PBL=$(STAGING_DIR_HOST)/bin/tfa-create-pbl \
BYTE_SWAP=$(STAGING_DIR_HOST)/bin/tfa-byte-swap
endef
TFAS := \
- ls1012afrdm \
- ls1012ardb \
- ls1012afrwy \
- ls1043ardb \
- ls1043ardb-sdboot \
- ls1046ardb \
- ls1046ardb-sdboot \
- ls1088ardb \
- ls1088ardb-sdboot \
- ls2088ardb
+ ls1012a-frdm \
+ ls1012a-rdb \
+ ls1012a-frwy-sdboot \
+ ls1043a-rdb \
+ ls1043a-rdb-sdboot \
+ ls1046a-rdb \
+ ls1046a-rdb-sdboot \
+ ls1088a-rdb \
+ ls1088a-rdb-sdboot \
+ ls2088a-rdb
$(eval $(call HostBuild))
$(foreach tfa,$(TFAS), \
- $(eval $(Package/tfa-layerscape/$(tfa))) \
- $(eval $(call Package/tfa-layerscape/Config,$(tfa),$(TITLE),$(BIN_BL2),$(BIN_FIP))) \
$(eval $(call BuildPackage,tfa-$(tfa))) \
)
PKG_NAME:=uboot-layerscape
PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot
ENV_SIZE:=0x2000
endef
-define U-Boot/ls1012afrdm
+define U-Boot/fsl_ls1012a-frdm
NAME:=NXP LS1012AFRDM
UBOOT_CONFIG:=ls1012afrdm_tfa
ENV_SIZE:=0x40000
endef
-define U-Boot/ls1012ardb
+define U-Boot/fsl_ls1012a-rdb
NAME:=NXP LS1012ARDB
UBOOT_CONFIG:=ls1012ardb_tfa
ENV_SIZE:=0x40000
endef
-define U-Boot/ls1012afrwy
+define U-Boot/fsl_ls1012a-frwy-sdboot
NAME:=NXP LS1012AFRWY
UBOOT_CONFIG:=ls1012afrwy_tfa
ENV_SIZE:=0x10000
endef
-define U-Boot/ls1043ardb
+define U-Boot/fsl_ls1043a-rdb
NAME:=NXP LS1043ARDB
UBOOT_CONFIG:=ls1043ardb_tfa
endef
-define U-Boot/ls1043ardb-sdboot
+define U-Boot/fsl_ls1043a-rdb-sdboot
NAME:=NXP LS1043ARDB SD Card Boot
UBOOT_CONFIG:=ls1043ardb_tfa
endef
-define U-Boot/ls1046ardb
+define U-Boot/fsl_ls1046a-rdb
NAME:=NXP LS1046ARDB
UBOOT_CONFIG:=ls1046ardb_tfa
endef
-define U-Boot/ls1046ardb-sdboot
+define U-Boot/fsl_ls1046a-rdb-sdboot
NAME:=NXP LS1046ARDB SD Card Boot
UBOOT_CONFIG:=ls1046ardb_tfa
endef
-define U-Boot/ls1088ardb
+define U-Boot/fsl_ls1088a-rdb
NAME:=NXP LS1088ARDB
UBOOT_CONFIG:=ls1088ardb_tfa
endef
-define U-Boot/ls1088ardb-sdboot
+define U-Boot/fsl_ls1088a-rdb-sdboot
NAME:=NXP LS1088ARDB SD Card Boot
UBOOT_CONFIG:=ls1088ardb_tfa
endef
-define U-Boot/ls2088ardb
+define U-Boot/fsl_ls2088a-rdb
NAME:=NXP LS2088ARDB
UBOOT_CONFIG:=ls2088ardb_tfa
endef
-define U-Boot/ls1021atwr
+define U-Boot/fsl_ls1021a-twr
NAME:=NXP LS1021ATWR
BUILD_SUBTARGET:=armv7
UBOOT_CONFIG:=ls1021atwr_nor
ENV_SIZE:=0x20000
endef
-define U-Boot/ls1021atwr-sdboot
+define U-Boot/fsl_ls1021a-twr-sdboot
NAME:=NXP LS1021ATWR SD Card Boot
BUILD_SUBTARGET:=armv7
UBOOT_CONFIG:=ls1021atwr_sdcard_ifc
ENV_SIZE:=0x20000
endef
-define U-Boot/ls1021aiot-sdboot
+define U-Boot/fsl_ls1021a-iot-sdboot
NAME:=NXP LS1021AIOT SD Card Boot
BUILD_SUBTARGET:=armv7
UBOOT_CONFIG:=ls1021aiot_sdcard
endef
UBOOT_TARGETS := \
- ls1012afrdm \
- ls1012ardb \
- ls1012afrwy \
- ls1043ardb \
- ls1043ardb-sdboot \
- ls1046ardb \
- ls1046ardb-sdboot \
- ls1088ardb \
- ls1088ardb-sdboot \
- ls2088ardb \
- ls1021atwr \
- ls1021atwr-sdboot \
- ls1021aiot-sdboot
+ fsl_ls1012a-frdm \
+ fsl_ls1012a-rdb \
+ fsl_ls1012a-frwy-sdboot \
+ fsl_ls1043a-rdb \
+ fsl_ls1043a-rdb-sdboot \
+ fsl_ls1046a-rdb \
+ fsl_ls1046a-rdb-sdboot \
+ fsl_ls1088a-rdb \
+ fsl_ls1088a-rdb-sdboot \
+ fsl_ls2088a-rdb \
+ fsl_ls1021a-twr \
+ fsl_ls1021a-twr-sdboot \
+ fsl_ls1021a-iot-sdboot
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+qspi_boot=sf probe 0:0;sf read $loadaddr 1000000 2800000;bootm $loadaddr
+bootargs=rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),-(firmware)
+bootcmd=echo starting OpenWrt ...;pfe stop;run qspi_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;pfe stop;run sd_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;pfe stop;run qspi_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffff
+initrd_high=0xffffffff
+sd_boot=mmc read ${fdtaddr} 7800 800;mmc read ${loadaddr} 8000 8000;bootm ${loadaddr} - ${fdtaddr}
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffff
+initrd_high=0xffffffff
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 cma=64M@0x0-0xb0000000
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffff
+initrd_high=0xffffffff
+nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock6 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(rcw),2m(u-boot),1m(u-boot-env),11m(reserved-1),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware) cma=64M@0x0-0xb0000000
+bootcmd=echo starting openwrt ...;run nor_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;run nor_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;run qspi_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xa0000000
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run mc_init;run sd_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xa0000000
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000
+qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock10 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=20c0000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;run mc_init;run qspi_boot
+bootdelay=3
--- /dev/null
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xa0000000
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+mc_init=fsl_mc start mc 580a00000 580e00000;fsl_mc apply dpl 580d00000
+nor_boot=cp.b 580f00000 $fdtaddr 100000;cp.b 581000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS1,115200 mtdparts=580000000.nor:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;run mc_init;run nor_boot
+bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-qspi_boot=sf probe 0:0;sf read $loadaddr 1000000 2800000;bootm $loadaddr
-bootargs=rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),-(firmware)
-bootcmd=echo starting OpenWrt ...;pfe stop;run qspi_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;pfe stop;run sd_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;pfe stop;run qspi_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffff
-initrd_high=0xffffffff
-sd_boot=mmc read ${fdtaddr} 7800 800;mmc read ${loadaddr} 8000 8000;bootm ${loadaddr} - ${fdtaddr}
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;run sd_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffff
-initrd_high=0xffffffff
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 cma=64M@0x0-0xb0000000
-bootcmd=echo starting openwrt ...;run sd_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffff
-initrd_high=0xffffffff
-nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock6 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(rcw),2m(u-boot),1m(u-boot-env),11m(reserved-1),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware) cma=64M@0x0-0xb0000000
-bootcmd=echo starting openwrt ...;run nor_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;run sd_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;run nor_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;run sd_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;run qspi_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xa0000000
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;run mc_init;run sd_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xa0000000
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000
-qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock10 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=20c0000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;run mc_init;run qspi_boot
-bootdelay=3
+++ /dev/null
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xa0000000
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-mc_init=fsl_mc start mc 580a00000 580e00000;fsl_mc apply dpl 580d00000
-nor_boot=cp.b 580f00000 $fdtaddr 100000;cp.b 581000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS1,115200 mtdparts=580000000.nor:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;run mc_init;run nor_boot
-bootdelay=3
PKG_NAME:=fman-ucode
PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://github.com/NXP/qoriq-fm-ucode.git
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1043_r1.1_106_4_18.bin \
- $(STAGING_DIR_IMAGE)/ls1043ardb-fman.bin
+ $(STAGING_DIR_IMAGE)/fsl_ls1043a-rdb-fman.bin
$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin \
- $(STAGING_DIR_IMAGE)/ls1046ardb-fman.bin
+ $(STAGING_DIR_IMAGE)/fsl_ls1046a-rdb-fman.bin
endef
$(eval $(call BuildPackage,layerscape-fman))
PKG_NAME:=ls-dpl
PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc-utils
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(CP) $(PKG_BUILD_DIR)/config/ls1088a/RDB/dpl-eth.0x1D_0x0D.dtb \
- $(STAGING_DIR_IMAGE)/ls1088ardb-dpl.dtb
+ $(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-dpl.dtb
$(CP) $(PKG_BUILD_DIR)/config/ls1088a/RDB/dpc.0x1D-0x0D.dtb \
- $(STAGING_DIR_IMAGE)/ls1088ardb-dpc.dtb
+ $(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-dpc.dtb
$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpl-eth.0x2A_0x41.dtb \
- $(STAGING_DIR_IMAGE)/ls2088ardb-dpl.dtb
+ $(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpl.dtb
$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpc.0x2A_0x41.dtb \
- $(STAGING_DIR_IMAGE)/ls2088ardb-dpc.dtb
+ $(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpc.dtb
endef
$(eval $(call BuildPackage,layerscape-dpl))
PKG_NAME:=ls-mc
PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://github.com/NXP/qoriq-mc-binary.git
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(CP) $(PKG_BUILD_DIR)/ls1088a/mc_10.20.4_ls1088a.itb \
- $(STAGING_DIR_IMAGE)/ls1088ardb-mc.itb
+ $(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-mc.itb
$(CP) $(PKG_BUILD_DIR)/ls2088a/mc_10.20.4_ls2088a.itb \
- $(STAGING_DIR_IMAGE)/ls2088ardb-mc.itb
+ $(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-mc.itb
endef
$(eval $(call BuildPackage,layerscape-mc))
PKG_NAME:=ls-rcw
PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
endef
BOARDS := \
- ls1012ardb \
- ls1012afrdm \
- ls1012afrwy \
- ls1043ardb \
- ls1043ardb-sdboot \
- ls1046ardb \
- ls1046ardb-sdboot \
- ls1088ardb \
- ls1088ardb-sdboot \
- ls2088ardb \
- ls1021atwr
-
-RCW_ls1012ardb :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
-RCW_ls1012afrdm :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
-RCW_ls1012afrwy :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
-RCW_ls1043ardb :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
-RCW_ls1043ardb-sdboot :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
-RCW_ls1046ardb :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
-RCW_ls1046ardb-sdboot :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
-RCW_ls1088ardb :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
-RCW_ls1088ardb-sdboot :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
-RCW_ls2088ardb :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
-RCW_ls1021atwr :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
+ ls1012a-rdb \
+ ls1012a-frdm \
+ ls1012a-frwy-sdboot \
+ ls1043a-rdb \
+ ls1043a-rdb-sdboot \
+ ls1046a-rdb \
+ ls1046a-rdb-sdboot \
+ ls1088a-rdb \
+ ls1088a-rdb-sdboot \
+ ls2088a-rdb \
+ ls1021a-twr
+
+RCW_ls1012a-rdb :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
+RCW_ls1012a-frdm :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
+RCW_ls1012a-frwy-sdboot :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
+RCW_ls1043a-rdb :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
+RCW_ls1043a-rdb-sdboot :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
+RCW_ls1046a-rdb :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
+RCW_ls1046a-rdb-sdboot :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
+RCW_ls1088a-rdb :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
+RCW_ls1088a-rdb-sdboot :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
+RCW_ls2088a-rdb :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
+RCW_ls1021a-twr :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(foreach board,$(BOARDS), \
- $(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/$(board)-rcw.bin;)
+ $(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/fsl_$(board)-rcw.bin;)
endef
$(eval $(call BuildPackage,layerscape-rcw))
KERNEL_NAME := zImage
KERNEL_LOADADDR := 0x80008000
KERNEL_ENTRY_POINT := 0x80008000
+ DEVICE_DTS = $(lastword $(subst _, ,$(1)))
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
IMAGE_SIZE := 64m
IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
append-rootfs | pad-rootfs | \
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
endef
-define Device/ls1021atwr
+define Device/fsl_ls1021a-twr
DEVICE_VENDOR := NXP
DEVICE_MODEL := TWR-LS1021A
DEVICE_VARIANT := Default
DEVICE_PACKAGES += layerscape-rcw
- DEVICE_DTS := ls1021a-twr
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-rcw.bin | pad-to 1M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
- SUPPORTED_DEVICES := fsl,ls1021a-twr
endef
-TARGET_DEVICES += ls1021atwr
+TARGET_DEVICES += fsl_ls1021a-twr
-define Device/ls1021atwr-sdboot
+define Device/fsl_ls1021a-twr-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := TWR-LS1021A
DEVICE_VARIANT := SD Card Boot
ls-append-sdhead $(1) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
- SUPPORTED_DEVICES := fsl,ls1021a-twr-sdboot
endef
-TARGET_DEVICES += ls1021atwr-sdboot
+TARGET_DEVICES += fsl_ls1021a-twr-sdboot
-define Device/ls1021aiot-sdboot
+define Device/fsl_ls1021a-iot-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1021A-IoT
DEVICE_VARIANT := SD Card Boot
DEVICE_DTS := ls1021a-iot
FILESYSTEMS := ext4
+ SUPPORTED_DEVICES :=
IMAGES := sdcard.img
IMAGE/sdcard.img := \
ls-clean | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
endef
-TARGET_DEVICES += ls1021aiot-sdboot
+TARGET_DEVICES += fsl_ls1021a-iot-sdboot
KERNEL := kernel-bin | gzip | uImage gzip
KERNEL_LOADADDR := 0x80080000
KERNEL_ENTRY_POINT := 0x80080000
+ DEVICE_DTS = freescale/$(subst _,-,$(1))
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
IMAGE_SIZE := 64m
IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
append-rootfs | pad-rootfs | \
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
endef
-define Device/ls1012afrdm
+define Device/fsl_ls1012a-frdm
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRDM-LS1012A
DEVICE_PACKAGES += \
layerscape-ppfe \
- tfa-ls1012afrdm \
+ tfa-ls1012a-frdm \
kmod-ppfe
- DEVICE_DTS := freescale/fsl-ls1012a-frdm
BLOCKSIZE := 256KiB
IMAGE/firmware.bin := \
ls-clean | \
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- SUPPORTED_DEVICES := fsl,ls1012a-frdm
endef
-TARGET_DEVICES += ls1012afrdm
+TARGET_DEVICES += fsl_ls1012a-frdm
-define Device/ls1012ardb
+define Device/fsl_ls1012a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1012A-RDB
DEVICE_PACKAGES += \
layerscape-ppfe \
- tfa-ls1012ardb \
+ tfa-ls1012a-rdb \
kmod-ppfe
- DEVICE_DTS := freescale/fsl-ls1012a-rdb
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
- SUPPORTED_DEVICES := fsl,ls1012a-rdb
endef
-TARGET_DEVICES += ls1012ardb
+TARGET_DEVICES += fsl_ls1012a-rdb
-define Device/ls1012afrwy
+define Device/fsl_ls1012a-frwy-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := FRWY-LS1012A
DEVICE_PACKAGES += \
layerscape-ppfe \
- tfa-ls1012afrwy \
+ tfa-ls1012a-frwy-sdboot \
kmod-ppfe
DEVICE_DTS := freescale/fsl-ls1012a-frwy
FILESYSTEMS := ext4
ls-append-sdhead $(1) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
- SUPPORTED_DEVICES := fsl,ls1012a-frwy-sdboot
endef
-TARGET_DEVICES += ls1012afrwy
+TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
-define Device/ls1043ardb
+define Device/fsl_ls1043a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1043A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-fman \
- tfa-ls1043ardb \
+ tfa-ls1043a-rdb \
fmc fmc-eth-config
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
IMAGE/firmware.bin := \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
- SUPPORTED_DEVICES := fsl,ls1043a-rdb
endef
-TARGET_DEVICES += ls1043ardb
+TARGET_DEVICES += fsl_ls1043a-rdb
-define Device/ls1043ardb-sdboot
+define Device/fsl_ls1043a-rdb-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1043A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-fman \
- tfa-ls1043ardb-sdboot \
+ tfa-ls1043a-rdb-sdboot \
fmc fmc-eth-config
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
FILESYSTEMS := ext4
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
- ls-append ls1043ardb-fman.bin | pad-to 15M | \
+ ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
ls-append-sdhead $(1) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
- SUPPORTED_DEVICES := fsl,ls1043a-rdb-sdboot
endef
-TARGET_DEVICES += ls1043ardb-sdboot
+TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
-define Device/ls1046ardb
+define Device/fsl_ls1046a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1046A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-fman \
- tfa-ls1046ardb \
+ tfa-ls1046a-rdb \
fmc fmc-eth-config
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
IMAGE/firmware.bin := \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
- SUPPORTED_DEVICES := fsl,ls1046a-rdb
endef
-TARGET_DEVICES += ls1046ardb
+TARGET_DEVICES += fsl_ls1046a-rdb
-define Device/ls1046ardb-sdboot
+define Device/fsl_ls1046a-rdb-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1046A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-fman \
- tfa-ls1046ardb-sdboot \
+ tfa-ls1046a-rdb-sdboot \
fmc fmc-eth-config
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
FILESYSTEMS := ext4
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 9M | \
- ls-append ls1046ardb-fman.bin | pad-to 15M | \
+ ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
ls-append-sdhead $(1) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
- SUPPORTED_DEVICES := fsl,ls1046a-rdb-sdboot
endef
-TARGET_DEVICES += ls1046ardb-sdboot
+TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
-define Device/ls1088ardb
+define Device/fsl_ls1088a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1088A-RDB
DEVICE_VARIANT := Default
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
- tfa-ls1088ardb \
+ tfa-ls1088a-rdb \
restool
- DEVICE_DTS := freescale/fsl-ls1088a-rdb
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
- SUPPORTED_DEVICES := fsl,ls1088a-rdb
endef
-TARGET_DEVICES += ls1088ardb
+TARGET_DEVICES += fsl_ls1088a-rdb
-define Device/ls1088ardb-sdboot
+define Device/fsl_ls1088a-rdb-sdboot
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS1088A-RDB
DEVICE_VARIANT := SD Card Boot
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
- tfa-ls1088ardb-sdboot \
+ tfa-ls1088a-rdb-sdboot \
restool
DEVICE_DTS := freescale/fsl-ls1088a-rdb
FILESYSTEMS := ext4
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append $(1)-fip.bin | pad-to 5M | \
ls-append $(1)-uboot-env.bin | pad-to 10M | \
- ls-append ls1088ardb-mc.itb | pad-to 13M | \
- ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
- ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
+ ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
+ ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
+ ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
ls-append-sdhead $(1) | pad-to 16M | \
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
- SUPPORTED_DEVICES := fsl,ls1088a-rdb-sdboot
endef
-TARGET_DEVICES += ls1088ardb-sdboot
+TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
-define Device/ls2088ardb
+define Device/fsl_ls2088a-rdb
DEVICE_VENDOR := NXP
DEVICE_MODEL := LS2088ARDB
DEVICE_PACKAGES += \
layerscape-mc \
layerscape-dpl \
- tfa-ls2088ardb \
+ tfa-ls2088a-rdb \
restool
- DEVICE_DTS := freescale/fsl-ls2088a-rdb
IMAGE/firmware.bin := \
ls-clean | \
ls-append $(1)-bl2.pbl | pad-to 1M | \
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
append-kernel | pad-to 32M | \
append-rootfs | pad-rootfs | check-size
- SUPPORTED_DEVICES := fsl,ls2088a-rdb
endef
-TARGET_DEVICES += ls2088ardb
+TARGET_DEVICES += fsl_ls2088a-rdb
-define Device/traverse-ls1043
+define Device/traverse_ls1043
DEVICE_VENDOR := Traverse
DEVICE_MODEL := LS1043 Boards
KERNEL_NAME := Image
MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
endef
-TARGET_DEVICES += traverse-ls1043
+TARGET_DEVICES += traverse_ls1043
projects / openwrt / staging / wigyori.git / commitdiff