move 2.6.22 specific patches into the right place
authorGabor Juhos <juhosg@openwrt.org>
Sat, 30 Jun 2007 15:03:56 +0000 (15:03 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Sat, 30 Jun 2007 15:03:56 +0000 (15:03 +0000)
SVN-Revision: 7797

25 files changed:
target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch [new file with mode: 0644]
target/linux/adm5120-2.6/patches/001-adm5120.patch [deleted file]
target/linux/adm5120-2.6/patches/002-adm5120_flash.patch [deleted file]
target/linux/adm5120-2.6/patches/003-adm5120_switch.patch [deleted file]
target/linux/adm5120-2.6/patches/004-adm5120_uart.patch [deleted file]
target/linux/adm5120-2.6/patches/005-adm5120_usb.patch [deleted file]
target/linux/adm5120-2.6/patches/006-adm5120_leds.patch [deleted file]
target/linux/adm5120-2.6/patches/007-adm5120_pci.patch [deleted file]
target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch [deleted file]
target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch [deleted file]
target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch [deleted file]
target/linux/adm5120-2.6/patches/140-cmdline_hack.patch [deleted file]
target/linux/adm5120-2.6/patches/500-Nand.patch [deleted file]
target/linux/adm5120eb-2.6/patches-2.6.22 [new symlink]

diff --git a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
new file mode 100644 (file)
index 0000000..da601b9
--- /dev/null
@@ -0,0 +1,111 @@
+Index: linux-2.6.22-rc6/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/arch/mips/Kconfig
++++ linux-2.6.22-rc6/arch/mips/Kconfig
+@@ -15,6 +15,17 @@ choice
+       prompt "System type"
+       default SGI_IP22
++config MIPS_ADM5120
++      bool "Support for ADM5120 SoC"
++      select SYS_HAS_CPU_MIPS32_R1
++      select DMA_NONCOHERENT
++      select HW_HAS_PCI
++      select IRQ_CPU
++      select SYS_SUPPORTS_LITTLE_ENDIAN
++      select SYS_SUPPORTS_BIG_ENDIAN
++      select SYS_SUPPORTS_32BIT_KERNEL
++      select GENERIC_GPIO
++
+ config MACH_ALCHEMY
+       bool "Alchemy processor based machines"
+@@ -658,6 +669,7 @@ config TOSHIBA_RBTX4938
+ endchoice
++source "arch/mips/adm5120/Kconfig"
+ source "arch/mips/au1000/Kconfig"
+ source "arch/mips/ddb5xxx/Kconfig"
+ source "arch/mips/gt64120/ev64120/Kconfig"
+Index: linux-2.6.22-rc6/arch/mips/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/arch/mips/Makefile
++++ linux-2.6.22-rc6/arch/mips/Makefile
+@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ)        += -Iinclude/
+ load-$(CONFIG_MACH_JAZZ)      += 0xffffffff80080000
+ #
++# ADMtek 5120
++#
++
++core-$(CONFIG_MIPS_ADM5120)   += arch/mips/adm5120/
++cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
++load-$(CONFIG_MIPS_ADM5120)   += 0xffffffff80001000
++
++#
+ # Common Alchemy Au1x00 stuff
+ #
+ core-$(CONFIG_SOC_AU1X00)     += arch/mips/au1000/common/
+Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
+===================================================================
+--- linux-2.6.22-rc6.orig/include/asm-mips/bootinfo.h
++++ linux-2.6.22-rc6/include/asm-mips/bootinfo.h
+@@ -213,6 +213,57 @@
+ #define MACH_GROUP_NEC_EMMA2RH 25     /* NEC EMMA2RH (was 23)         */
+ #define  MACH_NEC_MARKEINS    0       /* NEC EMMA2RH Mark-eins        */
++/*
++ * Valid machtype for group ADMtek ADM5120
++ */
++#define MACH_GROUP_ADM5120    26
++#define MACH_ADM5120_UNKNOWN  0       /* Unknown board */
++#define MACH_ADM5120_WP54G_WRT        1       /* Compex WP54G-WRT */
++#define MACH_ADM5120_WP54G    2       /* Compex WP54G */
++#define MACH_ADM5120_WP54AG   3       /* Compex WP54AG */
++#define MACH_ADM5120_WPP54G   4       /* Compex WPP54G */
++#define MACH_ADM5120_WPP54AG  5       /* Compex WPP54AG */
++#define MACH_ADM5120_NP28G    6       /* Compex NP28G */
++#define MACH_ADM5120_NP28GHS  7       /* Compex NP28G HotSpot */
++#define MACH_ADM5120_NP27G    8       /* Compex NP27G */
++#define MACH_ADM5120_WP54Gv1C 9       /* Compex WP54G version 1C */
++#define MACH_ADM5120_RB_111   10      /* Mikrotik RouterBOARD 111 */
++#define MACH_ADM5120_RB_112   11      /* Mikrotik RouterBOARD 112 */
++#define MACH_ADM5120_RB_133   12      /* Mikrotik RouterBOARD 133 */
++#define MACH_ADM5120_RB_133C  13      /* Mikrotik RouterBOARD 133c */
++#define MACH_ADM5120_RB_150   14      /* Mikrotik RouterBOARD 150 */
++#define MACH_ADM5120_RB_153   15      /* Mikrotik RouterBOARD 153 */
++#define MACH_ADM5120_HS100    16      /* ZyXEL HomeSafe 100/100W */
++#define MACH_ADM5120_P334     17      /* ZyXEL Prestige 334 */
++#define MACH_ADM5120_P334U    18      /* ZyXEL Prestige 334U */
++#define MACH_ADM5120_P334W    19      /* ZyXEL Prestige 334W */
++#define MACH_ADM5120_P334WH   20      /* ZyXEL Prestige 334WH */
++#define MACH_ADM5120_P334WHD  21      /* ZyXEL Prestige 334WHD */
++#define MACH_ADM5120_P334WT   22      /* ZyXEL Prestige 334WT */
++#define MACH_ADM5120_P335     23      /* ZyXEL Prestige 335/335WT */
++#define MACH_ADM5120_P335PLUS 24      /* ZyXEL Prestige 335Plus */
++#define MACH_ADM5120_P335U    25      /* ZyXEL Prestige 335U */
++#define MACH_ADM5120_ES2108   26      /* ZyXEL Ethernet Switch 2108 */
++#define MACH_ADM5120_ES2108F  27      /* ZyXEL Ethernet Switch 2108-F */
++#define MACH_ADM5120_ES2108G  28      /* ZyXEL Ethernet Switch 2108-G */
++#define MACH_ADM5120_ES2108LC 29      /* ZyXEL Ethernet Switch 2108-LC */
++#define MACH_ADM5120_ES2108PWR        30      /* ZyXEL Ethernet Switch 2108-PWR */
++#define MACH_ADM5120_ES2024A  31      /* ZyXEL Ethernet Switch 2024A */
++#define MACH_ADM5120_ES2024PWR        32      /* ZyXEL Ethernet Switch 2024PWR */
++#define MACH_ADM5120_CAS630   33      /* Cellvision CAS-630/630W */
++#define MACH_ADM5120_CAS670   34      /* Cellvision CAS-670/670W */
++#define MACH_ADM5120_CAS700   36      /* Cellvision CAS-700/700W */
++#define MACH_ADM5120_CAS771   37      /* Cellvision CAS-771/771W */
++#define MACH_ADM5120_CAS790   38      /* Cellvision CAS-790 */
++#define MACH_ADM5120_CAS861   39      /* Cellvision CAS-861/861W */
++#define MACH_ADM5120_NFS101U  40      /* Cellvision NFS-101U/101WU */
++#define MACH_ADM5120_NFS202U  41      /* Cellvision NFS-202U/202WU */
++#define MACH_ADM5120_EASY5120 43      /* Infineon EASY 5120 */
++#define MACH_ADM5120_EASY5120RT 44    /* Infineon EASY 5120-RT */
++#define MACH_ADM5120_EASY5120PATA 45  /* Infineon EASY 5120P-ATA */
++#define MACH_ADM5120_EASY83000        46      /* Infineon EASY-83000 */
++#define MACH_ADM5120_BR6104K  47      /* Edimax BR-6104K */
++
+ #define CL_SIZE                       COMMAND_LINE_SIZE
+ const char *get_system_type(void);
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch
new file mode 100644 (file)
index 0000000..355c126
--- /dev/null
@@ -0,0 +1,27 @@
+Index: linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/mtd/maps/Kconfig
++++ linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
+@@ -620,5 +620,10 @@ config MTD_PLATRAM
+         This selection automatically selects the map_ram driver.
++config MTD_ADM5120
++      tristate "Map driver for ADMtek ADM5120 boards"
++      depends on MIPS_ADM5120
++      select MTD_CFI_AMDSTD
++
+ endmenu
+Index: linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/mtd/maps/Makefile
++++ linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT)     += ocelot.o
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI)         += pci.o
+ obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
++obj-$(CONFIG_MTD_ADM5120)             += adm5120_mtd.o
+ obj-$(CONFIG_MTD_LASAT)               += lasat.o
+ obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch
new file mode 100644 (file)
index 0000000..9dde782
--- /dev/null
@@ -0,0 +1,27 @@
+Index: linux-2.6.22-rc6/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/net/Kconfig
++++ linux-2.6.22-rc6/drivers/net/Kconfig
+@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
+         If you have an Alchemy Semi AU1X00 based system
+         say Y.  Otherwise, say N.
++config MIPS_ADM5120_ENET
++      tristate "MIPS ADM5120 Ethernet switch support"
++      depends on NET_ETHERNET && MIPS_ADM5120
++
+ config NET_SB1250_MAC
+       tristate "SB1250 Ethernet support"
+       depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+Index: linux-2.6.22-rc6/drivers/net/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/net/Makefile
++++ linux-2.6.22-rc6/drivers/net/Makefile
+@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+ # This is also a 82596 and should probably be merged
+ obj-$(CONFIG_LP486E) += lp486e.o
++obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
+ obj-$(CONFIG_ETH16I) += eth16i.o
+ obj-$(CONFIG_ZORRO8390) += zorro8390.o
+ obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch
new file mode 100644 (file)
index 0000000..eb78e03
--- /dev/null
@@ -0,0 +1,53 @@
+Index: linux-2.6.22-rc6/drivers/serial/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/serial/Makefile
++++ linux-2.6.22-rc6/drivers/serial/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
+ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
++obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
+ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
+ obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+Index: linux-2.6.22-rc6/include/linux/serial_core.h
+===================================================================
+--- linux-2.6.22-rc6.orig/include/linux/serial_core.h
++++ linux-2.6.22-rc6/include/linux/serial_core.h
+@@ -143,6 +143,9 @@
+ #define PORT_KS8695   76
++/* ADMtek ADM5120 SoC */
++#define PORT_ADM5120  77
++
+ #ifdef __KERNEL__
+ #include <linux/compiler.h>
+Index: linux-2.6.22-rc6/drivers/serial/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/serial/Kconfig
++++ linux-2.6.22-rc6/drivers/serial/Kconfig
+@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
+ comment "Non-8250 serial port support"
++config SERIAL_ADM5120
++       bool "ADM5120 serial port support"
++       depends on MIPS_ADM5120
++       select SERIAL_CORE
++       select SERIAL_CORE_CONSOLE
++       help
++         Driver for the on chip UARTs on the ADM5120 SoC
++
++config ADM5120_NR_UARTS
++       int "Maximum number of ADM5120 serial ports"
++       depends on SERIAL_ADM5120
++       default "2"
++       ---help---
++         Set this to the number of serial ports you want the driver to
++         support.
++
+ config SERIAL_AMBA_PL010
+       tristate "ARM AMBA PL010 serial port support"
+       depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
new file mode 100644 (file)
index 0000000..c862f90
--- /dev/null
@@ -0,0 +1,232 @@
+Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/usb/core/hub.c
++++ linux-2.6.22-rc6/drivers/usb/core/hub.c
+@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
+                       : (USB_ENDPOINT_XFER_BULK << 11);
+       if (usb_pipein (pipe))
+               clear->devinfo |= 1 << 15;
+-      
++
+       /* tell keventd to clear state for this TT */
+       spin_lock_irqsave (&tt->lock, flags);
+       list_add_tail (&clear->clear_list, &tt->clear_list);
+@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub
+                       "%s failed (err = %d)\n", __FUNCTION__, ret);
+       else {
+               *status = le16_to_cpu(hub->status->hub.wHubStatus);
+-              *change = le16_to_cpu(hub->status->hub.wHubChange); 
++              *change = le16_to_cpu(hub->status->hub.wHubChange);
+               ret = 0;
+       }
+       mutex_unlock(&hub->status_mutex);
+@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu
+                       ret = -EIO;
+       } else {
+               *status = le16_to_cpu(hub->status->port.wPortStatus);
+-              *change = le16_to_cpu(hub->status->port.wPortChange); 
++              *change = le16_to_cpu(hub->status->port.wPortChange);
+               ret = 0;
+       }
+       mutex_unlock(&hub->status_mutex);
+@@ -2007,7 +2007,7 @@ static inline int remote_wakeup(struct u
+  * Between connect detection and reset signaling there must be a delay
+  * of 100ms at least for debounce and power-settling.  The corresponding
+  * timer shall restart whenever the downstream port detects a disconnect.
+- * 
++ *
+  * Apparently there are some bluetooth and irda-dongles and a number of
+  * low-speed devices for which this debounce period may last over a second.
+  * Not covered by the spec - but easy to deal with.
+@@ -2142,7 +2142,7 @@ hub_port_init (struct usb_hub *hub, stru
+               goto fail;
+       }
+       oldspeed = udev->speed;
+-  
++
+       /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
+        * it's fixed size except for full speed devices.
+        * For Wireless USB devices, ep0 max packet is always 512 (tho
+@@ -2168,7 +2168,7 @@ hub_port_init (struct usb_hub *hub, stru
+       default:
+               goto fail;
+       }
+- 
++
+       type = "";
+       switch (udev->speed) {
+       case USB_SPEED_LOW:     speed = "low";  break;
+@@ -2194,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, stru
+               udev->tt = &hub->tt;
+               udev->ttport = port1;
+       }
+- 
++
+       /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
+        * Because device hardware and firmware is sometimes buggy in
+        * this area, and this is how Linux has done it for ages.
+@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru
+                                       USB_DT_DEVICE << 8, 0,
+                                       buf, GET_DESCRIPTOR_BUFSIZE,
+                                       USB_CTRL_GET_TIMEOUT);
++printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
++buf->bDescriptorType, USB_DT_DEVICE);
+                               switch (buf->bMaxPacketSize0) {
+                               case 8: case 16: case 32: case 64: case 255:
+                                       if (buf->bDescriptorType ==
+@@ -2281,7 +2283,7 @@ hub_port_init (struct usb_hub *hub, stru
+                               udev->devnum, retval);
+                       goto fail;
+               }
+- 
++
+               /* cope with hardware quirkiness:
+                *  - let SET_ADDRESS settle, some device hardware wants it
+                *  - read ep0 maxpacket even for high and low speed,
+@@ -2318,7 +2320,7 @@ hub_port_init (struct usb_hub *hub, stru
+               udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
+               ep0_reinit(udev);
+       }
+-  
++
+       retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
+       if (retval < (signed)sizeof(udev->descriptor)) {
+               dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
+@@ -2416,7 +2418,7 @@ static void hub_port_connect_change(stru
+       struct device *hub_dev = hub->intfdev;
+       u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+       int status, i;
+- 
++
+       dev_dbg (hub_dev,
+               "port %d, status %04x, change %04x, %s\n",
+               port1, portstatus, portchange, portspeed (portstatus));
+@@ -2425,7 +2427,7 @@ static void hub_port_connect_change(stru
+               set_port_led(hub, port1, HUB_LED_AUTO);
+               hub->indicator[port1-1] = INDICATOR_AUTO;
+       }
+- 
++
+       /* Disconnect any existing devices under this port */
+       if (hdev->children[port1-1])
+               usb_disconnect(&hdev->children[port1-1]);
+@@ -2455,7 +2457,7 @@ static void hub_port_connect_change(stru
+               if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
+                               && !(portstatus & (1 << USB_PORT_FEAT_POWER)))
+                       set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+- 
++
+               if (portstatus & USB_PORT_STAT_ENABLE)
+                       goto done;
+               return;
+@@ -2535,7 +2537,7 @@ static void hub_port_connect_change(stru
+                               goto loop_disable;
+                       }
+               }
+- 
++
+               /* check for devices running slower than they could */
+               if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
+                               && udev->speed == USB_SPEED_FULL
+@@ -2587,7 +2589,7 @@ loop:
+               if (status == -ENOTCONN)
+                       break;
+       }
+- 
++
+ done:
+       hub_port_disable(hub, port1, 1);
+ }
+@@ -2720,7 +2722,7 @@ static void hub_events(void)
+                                * EM interference sometimes causes badly
+                                * shielded USB devices to be shutdown by
+                                * the hub, this hack enables them again.
+-                               * Works at least with mouse driver. 
++                               * Works at least with mouse driver.
+                                */
+                               if (!(portstatus & USB_PORT_STAT_ENABLE)
+                                   && !connect_change
+@@ -2750,7 +2752,7 @@ static void hub_events(void)
+                                       "resume on port %d, status %d\n",
+                                       i, ret);
+                       }
+-                      
++
+                       if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
+                               dev_err (hub_dev,
+                                       "over-current change on port %d\n",
+@@ -2985,7 +2987,7 @@ int usb_reset_device(struct usb_device *
+       if (ret < 0)
+               goto re_enumerate;
+- 
++
+       /* Device might have changed firmware (DFU or similar) */
+       if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor)
+                       || config_descriptors_changed (udev)) {
+@@ -2993,7 +2995,7 @@ int usb_reset_device(struct usb_device *
+               udev->descriptor = descriptor;  /* for disconnect() calls */
+               goto re_enumerate;
+       }
+-  
++
+       if (!udev->actconfig)
+               goto done;
+@@ -3031,7 +3033,7 @@ int usb_reset_device(struct usb_device *
+ done:
+       return 0;
+- 
++
+ re_enumerate:
+       hub_port_logical_disconnect(parent_hub, port1);
+       return -ENODEV;
+Index: linux-2.6.22-rc6/drivers/usb/host/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/usb/host/Kconfig
++++ linux-2.6.22-rc6/drivers/usb/host/Kconfig
+@@ -224,3 +224,6 @@ config USB_SL811_CS
+         To compile this driver as a module, choose M here: the
+         module will be called "sl811_cs".
++config USB_ADM5120_HCD
++      tristate "ADM5120 HCD support"
++      depends on USB && MIPS_ADM5120
+Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/usb/host/Makefile
++++ linux-2.6.22-rc6/drivers/usb/host/Makefile
+@@ -8,6 +8,7 @@ endif
+ obj-$(CONFIG_PCI)             += pci-quirks.o
++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
+ obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
+ obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
+ obj-$(CONFIG_USB_OHCI_HCD)    += ohci-hcd.o
+Index: linux-2.6.22-rc6/drivers/usb/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/usb/Kconfig
++++ linux-2.6.22-rc6/drivers/usb/Kconfig
+@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
+ source "drivers/usb/image/Kconfig"
+-source "drivers/usb/mon/Kconfig"
+-
+ comment "USB port drivers"
+       depends on USB
+Index: linux-2.6.22-rc6/drivers/usb/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/usb/Makefile
++++ linux-2.6.22-rc6/drivers/usb/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)   += host/
+ obj-$(CONFIG_USB_SL811_HCD)   += host/
+ obj-$(CONFIG_USB_U132_HCD)    += host/
+ obj-$(CONFIG_USB_OHCI_AT91)   += host/
++obj-$(CONFIG_USB_ADM5120_HCD)         += host/
+ obj-$(CONFIG_USB_ACM)         += class/
+ obj-$(CONFIG_USB_PRINTER)     += class/
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch
new file mode 100644 (file)
index 0000000..91ca638
--- /dev/null
@@ -0,0 +1,45 @@
+Index: linux-2.6.22-rc6/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/leds/Kconfig
++++ linux-2.6.22-rc6/drivers/leds/Kconfig
+@@ -20,6 +20,27 @@ config LEDS_CLASS
+ comment "LED drivers"
++config LEDS_GPIO
++      tristate "LED support for LEDS on GPIO lines"
++      depends on LEDS_CLASS && GENERIC_GPIO
++      help
++        This option enables support for LEDs connected to GPIO lines
++
++config LEDS_ADM5120
++      tristate "LED Support for ADM5120 GPIO LEDs"
++      depends on LEDS_GPIO && MIPS_ADM5120
++      help
++        This option enables support for LEDs connected to GPIO lines
++        on ADM5120 SoC based platforms.
++
++config LEDS_ADM5120_EXPERIMENTAL
++      bool "Enable ADM5120 LEDs experimental code"
++      depends on LEDS_ADM5120
++
++config LEDS_ADM5120_DIAG
++      bool "Enable ADM5120 LEDs diagnostic mode"
++      depends on LEDS_ADM5120
++
+ config LEDS_CORGI
+       tristate "LED Support for the Sharp SL-C7x0 series"
+       depends on LEDS_CLASS && PXA_SHARP_C7xx
+Index: linux-2.6.22-rc6/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/leds/Makefile
++++ linux-2.6.22-rc6/drivers/leds/Makefile
+@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS)               += led-class.o
+ obj-$(CONFIG_LEDS_TRIGGERS)           += led-triggers.o
+ # LED Platform Drivers
++obj-$(CONFIG_LEDS_GPIO)               += leds-gpio.o
++obj-$(CONFIG_LEDS_ADM5120)            += leds-adm5120.o
+ obj-$(CONFIG_LEDS_CORGI)              += leds-corgi.o
+ obj-$(CONFIG_LEDS_LOCOMO)             += leds-locomo.o
+ obj-$(CONFIG_LEDS_SPITZ)              += leds-spitz.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch
new file mode 100644 (file)
index 0000000..18839cf
--- /dev/null
@@ -0,0 +1,23 @@
+Index: linux-2.6.22-rc6/arch/mips/pci/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/arch/mips/pci/Makefile
++++ linux-2.6.22-rc6/arch/mips/pci/Makefile
+@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)       += fixup-
+ obj-$(CONFIG_VICTOR_MPC30X)   += fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
++obj-$(CONFIG_PCI_ADM5120)     += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
+Index: linux-2.6.22-rc6/include/linux/pci_ids.h
+===================================================================
+--- linux-2.6.22-rc6.orig/include/linux/pci_ids.h
++++ linux-2.6.22-rc6/include/linux/pci_ids.h
+@@ -1712,6 +1712,9 @@
+ #define PCI_VENDOR_ID_ESDGMBH         0x12fe
+ #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
++#define PCI_VENDOR_ID_ADMTEK          0x1317
++#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
++
+ #define PCI_VENDOR_ID_SIIG            0x131f
+ #define PCI_SUBVENDOR_ID_SIIG         0x131f
+ #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch
new file mode 100644 (file)
index 0000000..c0fd645
--- /dev/null
@@ -0,0 +1,40 @@
+Index: linux-2.6.22-rc6/include/asm-mips/byteorder.h
+===================================================================
+--- linux-2.6.22-rc6.orig/include/asm-mips/byteorder.h
++++ linux-2.6.22-rc6/include/asm-mips/byteorder.h
+@@ -58,6 +58,35 @@ static __inline__ __attribute_const__ __
+ #endif /* CONFIG_CPU_MIPSR2 */
++#ifdef CONFIG_ADM5120_HARDWARE_SWAB
++
++static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x)
++{
++      __asm__ (
++      "       sh      %2, 0xCA(%1)                    \n"
++      "       lhu     %0, 0xCC(%1)                    \n"
++      : "=r" (x)
++      : "r" (0xB2000000), "r" (x));
++
++      return x;
++}
++
++static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x)
++{
++      __asm__ (
++      "       sw      %2, 0xC8(%1)                    \n"
++      "       lw      %0, 0xCC(%1)                    \n"
++      : "=r" (x)
++      : "r" (0xB2000000), "r" (x));
++
++      return x;
++}
++
++#define __arch__swab16(x)     ___adm5120__swab16(x)
++#define __arch__swab32(x)     ___adm5120__swab32(x)
++
++#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
++
+ #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+ #  define __BYTEORDER_HAS_U64__
+ #  define __SWAB_64_THRU_32__
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
new file mode 100644 (file)
index 0000000..2b4381c
--- /dev/null
@@ -0,0 +1,39 @@
+Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/mtd/Kconfig
++++ linux-2.6.22-rc6/drivers/mtd/Kconfig
+@@ -155,6 +155,22 @@ config MTD_AFS_PARTS
+         for your particular device. It won't happen automatically. The
+         'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
++config MTD_MYLOADER_PARTS
++      tristate "MyLoader partition parsing"
++      depends on MIPS_ADM5120 && MTD_PARTITIONS
++      ---help---
++        MyLoader is a bootloader which allows the user to define partitions
++        in flash devices, by putting a table in the second erase block
++        on the device, similar to a partition table. This table gives the 
++        offsets and lengths of the user defined partitions.
++
++        If you need code which can detect and parse these tables, and
++        register MTD 'partitions' corresponding to each image detected,
++        enable this option.
++
++        You will still need the parsing functions to be called by the driver
++        for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ config MTD_CHAR
+Index: linux-2.6.22-rc6/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/mtd/Makefile
++++ linux-2.6.22-rc6/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)     += mtdconcat.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)                += mtdchar.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch b/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch
new file mode 100644 (file)
index 0000000..543cb94
--- /dev/null
@@ -0,0 +1,87 @@
+Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -47,12 +47,17 @@
+ #define MANUFACTURER_AMD      0x0001
+ #define MANUFACTURER_ATMEL    0x001F
+ #define MANUFACTURER_SST      0x00BF
++#define MANUFACTURER_MACRONIX 0x00C2
+ #define SST49LF004B           0x0060
+ #define SST49LF040B           0x0050
+ #define SST49LF008A           0x005a
+ #define AT49BV6416            0x00d6
+ #define MANUFACTURER_SAMSUNG  0x00ec
++/* Macronix */
++#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
++#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
++
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -217,6 +222,35 @@ static void fixup_use_atmel_lock(struct 
+       mtd->flags |= MTD_STUPID_LOCK;
+ }
++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++/*
++ * Some Macronix chips has bad bootblock information in the CFI table
++ */
++static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
++{
++      struct map_info *map = mtd->priv;
++      struct cfi_private *cfi = map->fldrv_priv;
++      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
++      __u8 major = extp->MajorVersion;
++      __u8 minor = extp->MinorVersion;
++
++      switch (cfi->id) {
++      /* TODO: put affected chip ids here */
++      case MX29LV160B:
++      case MX29LV320B:
++              if (((major << 8) | minor) != 0x3131)
++                      break;
++
++              if (extp->TopBottom == 2)
++                      break;
++
++              extp->TopBottom = 2;    /* Bottom boot */
++              printk("%s: weird Macronix chip detected, id:0x%04X, boot location "
++                      "forced to bottom\n", map->name, cfi->id);
++      }
++}
++#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
++
+ static struct cfi_fixup cfi_fixup_table[] = {
+ #ifdef AMD_BOOTLOC_BUG
+       { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+@@ -231,6 +265,9 @@ static struct cfi_fixup cfi_fixup_table[
+       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++      { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
++#endif
+       { 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+Index: linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/mtd/chips/Kconfig
++++ linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
+         provides support for one of those command sets, used on chips
+         including the AMD Am29LV320.
++config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++      bool "Force bottom boot for Macronix flash chips"
++      depends on MTD_CFI_AMDSTD
++      help
++        Some Macronix flash chips have wrong boot-block location in the
++        CFI table, and the driver may detect the type incorrectly. Select 
++        this if your board has such chip.
++
+ config MTD_CFI_STAA
+       tristate "Support for ST (Advanced Architecture) flash chips"
+       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch
new file mode 100644 (file)
index 0000000..47378e5
--- /dev/null
@@ -0,0 +1,26 @@
+Index: linux-2.6.22-rc6/arch/mips/kernel/head.S
+===================================================================
+--- linux-2.6.22-rc6.orig/arch/mips/kernel/head.S
++++ linux-2.6.22-rc6/arch/mips/kernel/head.S
+@@ -129,14 +129,19 @@
+ #endif
+       .endm
+-
+       j kernel_entry
+       nop
+-
++      nop
++      
+       /*
+        * Reserved space for exception handlers.
+        * Necessary for machines which link their kernels at KSEG0.
++       * Use as temporary storage for the kernel command line, so that it
++       * can be updated easily without having to relink the kernel.
+        */
++       
++EXPORT(_image_cmdline)
++      .ascii "CMDLINE:"
+       .align 10
+ EXPORT(stext)                                 # used for profiling
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch b/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch
new file mode 100644 (file)
index 0000000..fb503c5
--- /dev/null
@@ -0,0 +1,29 @@
+Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/mtd/nand/Kconfig
++++ linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+@@ -81,6 +81,12 @@ config MTD_NAND_TS7250
+       help
+         Support for NAND flash on Technologic Systems TS-7250 platform.
++config MTD_NAND_RB100
++      tristate "NAND Flash device on RB100 board"
++      depends on MTD_NAND
++      help
++        Support for NAND flash on RB100 platform.
++
+ config MTD_NAND_IDS
+       tristate
+Index: linux-2.6.22-rc6/drivers/mtd/nand/Makefile
+===================================================================
+--- linux-2.6.22-rc6.orig/drivers/mtd/nand/Makefile
++++ linux-2.6.22-rc6/drivers/mtd/nand/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)          += cafe_nan
+ obj-$(CONFIG_MTD_NAND_SPIA)           += spia.o
+ obj-$(CONFIG_MTD_NAND_AMS_DELTA)      += ams-delta.o
+ obj-$(CONFIG_MTD_NAND_TOTO)           += toto.o
++obj-$(CONFIG_MTD_NAND_RB100)          += rbmipsnand.o
+ obj-$(CONFIG_MTD_NAND_AUTCPU12)               += autcpu12.o
+ obj-$(CONFIG_MTD_NAND_EDB7312)                += edb7312.o
+ obj-$(CONFIG_MTD_NAND_AU1550)         += au1550nd.o
diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch
deleted file mode 100644 (file)
index da601b9..0000000
+++ /dev/null
@@ -1,111 +0,0 @@
-Index: linux-2.6.22-rc6/arch/mips/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/Kconfig
-+++ linux-2.6.22-rc6/arch/mips/Kconfig
-@@ -15,6 +15,17 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config MIPS_ADM5120
-+      bool "Support for ADM5120 SoC"
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select DMA_NONCOHERENT
-+      select HW_HAS_PCI
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select GENERIC_GPIO
-+
- config MACH_ALCHEMY
-       bool "Alchemy processor based machines"
-@@ -658,6 +669,7 @@ config TOSHIBA_RBTX4938
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/au1000/Kconfig"
- source "arch/mips/ddb5xxx/Kconfig"
- source "arch/mips/gt64120/ev64120/Kconfig"
-Index: linux-2.6.22-rc6/arch/mips/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/Makefile
-+++ linux-2.6.22-rc6/arch/mips/Makefile
-@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ)        += -Iinclude/
- load-$(CONFIG_MACH_JAZZ)      += 0xffffffff80080000
- #
-+# ADMtek 5120
-+#
-+
-+core-$(CONFIG_MIPS_ADM5120)   += arch/mips/adm5120/
-+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
-+load-$(CONFIG_MIPS_ADM5120)   += 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00)     += arch/mips/au1000/common/
-Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.22-rc6.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.22-rc6/include/asm-mips/bootinfo.h
-@@ -213,6 +213,57 @@
- #define MACH_GROUP_NEC_EMMA2RH 25     /* NEC EMMA2RH (was 23)         */
- #define  MACH_NEC_MARKEINS    0       /* NEC EMMA2RH Mark-eins        */
-+/*
-+ * Valid machtype for group ADMtek ADM5120
-+ */
-+#define MACH_GROUP_ADM5120    26
-+#define MACH_ADM5120_UNKNOWN  0       /* Unknown board */
-+#define MACH_ADM5120_WP54G_WRT        1       /* Compex WP54G-WRT */
-+#define MACH_ADM5120_WP54G    2       /* Compex WP54G */
-+#define MACH_ADM5120_WP54AG   3       /* Compex WP54AG */
-+#define MACH_ADM5120_WPP54G   4       /* Compex WPP54G */
-+#define MACH_ADM5120_WPP54AG  5       /* Compex WPP54AG */
-+#define MACH_ADM5120_NP28G    6       /* Compex NP28G */
-+#define MACH_ADM5120_NP28GHS  7       /* Compex NP28G HotSpot */
-+#define MACH_ADM5120_NP27G    8       /* Compex NP27G */
-+#define MACH_ADM5120_WP54Gv1C 9       /* Compex WP54G version 1C */
-+#define MACH_ADM5120_RB_111   10      /* Mikrotik RouterBOARD 111 */
-+#define MACH_ADM5120_RB_112   11      /* Mikrotik RouterBOARD 112 */
-+#define MACH_ADM5120_RB_133   12      /* Mikrotik RouterBOARD 133 */
-+#define MACH_ADM5120_RB_133C  13      /* Mikrotik RouterBOARD 133c */
-+#define MACH_ADM5120_RB_150   14      /* Mikrotik RouterBOARD 150 */
-+#define MACH_ADM5120_RB_153   15      /* Mikrotik RouterBOARD 153 */
-+#define MACH_ADM5120_HS100    16      /* ZyXEL HomeSafe 100/100W */
-+#define MACH_ADM5120_P334     17      /* ZyXEL Prestige 334 */
-+#define MACH_ADM5120_P334U    18      /* ZyXEL Prestige 334U */
-+#define MACH_ADM5120_P334W    19      /* ZyXEL Prestige 334W */
-+#define MACH_ADM5120_P334WH   20      /* ZyXEL Prestige 334WH */
-+#define MACH_ADM5120_P334WHD  21      /* ZyXEL Prestige 334WHD */
-+#define MACH_ADM5120_P334WT   22      /* ZyXEL Prestige 334WT */
-+#define MACH_ADM5120_P335     23      /* ZyXEL Prestige 335/335WT */
-+#define MACH_ADM5120_P335PLUS 24      /* ZyXEL Prestige 335Plus */
-+#define MACH_ADM5120_P335U    25      /* ZyXEL Prestige 335U */
-+#define MACH_ADM5120_ES2108   26      /* ZyXEL Ethernet Switch 2108 */
-+#define MACH_ADM5120_ES2108F  27      /* ZyXEL Ethernet Switch 2108-F */
-+#define MACH_ADM5120_ES2108G  28      /* ZyXEL Ethernet Switch 2108-G */
-+#define MACH_ADM5120_ES2108LC 29      /* ZyXEL Ethernet Switch 2108-LC */
-+#define MACH_ADM5120_ES2108PWR        30      /* ZyXEL Ethernet Switch 2108-PWR */
-+#define MACH_ADM5120_ES2024A  31      /* ZyXEL Ethernet Switch 2024A */
-+#define MACH_ADM5120_ES2024PWR        32      /* ZyXEL Ethernet Switch 2024PWR */
-+#define MACH_ADM5120_CAS630   33      /* Cellvision CAS-630/630W */
-+#define MACH_ADM5120_CAS670   34      /* Cellvision CAS-670/670W */
-+#define MACH_ADM5120_CAS700   36      /* Cellvision CAS-700/700W */
-+#define MACH_ADM5120_CAS771   37      /* Cellvision CAS-771/771W */
-+#define MACH_ADM5120_CAS790   38      /* Cellvision CAS-790 */
-+#define MACH_ADM5120_CAS861   39      /* Cellvision CAS-861/861W */
-+#define MACH_ADM5120_NFS101U  40      /* Cellvision NFS-101U/101WU */
-+#define MACH_ADM5120_NFS202U  41      /* Cellvision NFS-202U/202WU */
-+#define MACH_ADM5120_EASY5120 43      /* Infineon EASY 5120 */
-+#define MACH_ADM5120_EASY5120RT 44    /* Infineon EASY 5120-RT */
-+#define MACH_ADM5120_EASY5120PATA 45  /* Infineon EASY 5120P-ATA */
-+#define MACH_ADM5120_EASY83000        46      /* Infineon EASY-83000 */
-+#define MACH_ADM5120_BR6104K  47      /* Edimax BR-6104K */
-+
- #define CL_SIZE                       COMMAND_LINE_SIZE
- const char *get_system_type(void);
diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
deleted file mode 100644 (file)
index 355c126..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-Index: linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
-@@ -620,5 +620,10 @@ config MTD_PLATRAM
-         This selection automatically selects the map_ram driver.
-+config MTD_ADM5120
-+      tristate "Map driver for ADMtek ADM5120 boards"
-+      depends on MIPS_ADM5120
-+      select MTD_CFI_AMDSTD
-+
- endmenu
-Index: linux-2.6.22-rc6/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/maps/Makefile
-@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT)     += ocelot.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
- obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120)             += adm5120_mtd.o
- obj-$(CONFIG_MTD_LASAT)               += lasat.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
deleted file mode 100644 (file)
index 9dde782..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-Index: linux-2.6.22-rc6/drivers/net/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/net/Kconfig
-+++ linux-2.6.22-rc6/drivers/net/Kconfig
-@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
-         If you have an Alchemy Semi AU1X00 based system
-         say Y.  Otherwise, say N.
-+config MIPS_ADM5120_ENET
-+      tristate "MIPS ADM5120 Ethernet switch support"
-+      depends on NET_ETHERNET && MIPS_ADM5120
-+
- config NET_SB1250_MAC
-       tristate "SB1250 Ethernet support"
-       depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-Index: linux-2.6.22-rc6/drivers/net/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/net/Makefile
-+++ linux-2.6.22-rc6/drivers/net/Makefile
-@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
deleted file mode 100644 (file)
index eb78e03..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-Index: linux-2.6.22-rc6/drivers/serial/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/serial/Makefile
-+++ linux-2.6.22-rc6/drivers/serial/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
- obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
-+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
- obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
- obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
- obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-Index: linux-2.6.22-rc6/include/linux/serial_core.h
-===================================================================
---- linux-2.6.22-rc6.orig/include/linux/serial_core.h
-+++ linux-2.6.22-rc6/include/linux/serial_core.h
-@@ -143,6 +143,9 @@
- #define PORT_KS8695   76
-+/* ADMtek ADM5120 SoC */
-+#define PORT_ADM5120  77
-+
- #ifdef __KERNEL__
- #include <linux/compiler.h>
-Index: linux-2.6.22-rc6/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/serial/Kconfig
-+++ linux-2.6.22-rc6/drivers/serial/Kconfig
-@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
- comment "Non-8250 serial port support"
-+config SERIAL_ADM5120
-+       bool "ADM5120 serial port support"
-+       depends on MIPS_ADM5120
-+       select SERIAL_CORE
-+       select SERIAL_CORE_CONSOLE
-+       help
-+         Driver for the on chip UARTs on the ADM5120 SoC
-+
-+config ADM5120_NR_UARTS
-+       int "Maximum number of ADM5120 serial ports"
-+       depends on SERIAL_ADM5120
-+       default "2"
-+       ---help---
-+         Set this to the number of serial ports you want the driver to
-+         support.
-+
- config SERIAL_AMBA_PL010
-       tristate "ARM AMBA PL010 serial port support"
-       depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
deleted file mode 100644 (file)
index c862f90..0000000
+++ /dev/null
@@ -1,232 +0,0 @@
-Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/core/hub.c
-+++ linux-2.6.22-rc6/drivers/usb/core/hub.c
-@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
-                       : (USB_ENDPOINT_XFER_BULK << 11);
-       if (usb_pipein (pipe))
-               clear->devinfo |= 1 << 15;
--      
-+
-       /* tell keventd to clear state for this TT */
-       spin_lock_irqsave (&tt->lock, flags);
-       list_add_tail (&clear->clear_list, &tt->clear_list);
-@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub
-                       "%s failed (err = %d)\n", __FUNCTION__, ret);
-       else {
-               *status = le16_to_cpu(hub->status->hub.wHubStatus);
--              *change = le16_to_cpu(hub->status->hub.wHubChange); 
-+              *change = le16_to_cpu(hub->status->hub.wHubChange);
-               ret = 0;
-       }
-       mutex_unlock(&hub->status_mutex);
-@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu
-                       ret = -EIO;
-       } else {
-               *status = le16_to_cpu(hub->status->port.wPortStatus);
--              *change = le16_to_cpu(hub->status->port.wPortChange); 
-+              *change = le16_to_cpu(hub->status->port.wPortChange);
-               ret = 0;
-       }
-       mutex_unlock(&hub->status_mutex);
-@@ -2007,7 +2007,7 @@ static inline int remote_wakeup(struct u
-  * Between connect detection and reset signaling there must be a delay
-  * of 100ms at least for debounce and power-settling.  The corresponding
-  * timer shall restart whenever the downstream port detects a disconnect.
-- * 
-+ *
-  * Apparently there are some bluetooth and irda-dongles and a number of
-  * low-speed devices for which this debounce period may last over a second.
-  * Not covered by the spec - but easy to deal with.
-@@ -2142,7 +2142,7 @@ hub_port_init (struct usb_hub *hub, stru
-               goto fail;
-       }
-       oldspeed = udev->speed;
--  
-+
-       /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
-        * it's fixed size except for full speed devices.
-        * For Wireless USB devices, ep0 max packet is always 512 (tho
-@@ -2168,7 +2168,7 @@ hub_port_init (struct usb_hub *hub, stru
-       default:
-               goto fail;
-       }
-- 
-+
-       type = "";
-       switch (udev->speed) {
-       case USB_SPEED_LOW:     speed = "low";  break;
-@@ -2194,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, stru
-               udev->tt = &hub->tt;
-               udev->ttport = port1;
-       }
-- 
-+
-       /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
-        * Because device hardware and firmware is sometimes buggy in
-        * this area, and this is how Linux has done it for ages.
-@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru
-                                       USB_DT_DEVICE << 8, 0,
-                                       buf, GET_DESCRIPTOR_BUFSIZE,
-                                       USB_CTRL_GET_TIMEOUT);
-+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
-+buf->bDescriptorType, USB_DT_DEVICE);
-                               switch (buf->bMaxPacketSize0) {
-                               case 8: case 16: case 32: case 64: case 255:
-                                       if (buf->bDescriptorType ==
-@@ -2281,7 +2283,7 @@ hub_port_init (struct usb_hub *hub, stru
-                               udev->devnum, retval);
-                       goto fail;
-               }
-- 
-+
-               /* cope with hardware quirkiness:
-                *  - let SET_ADDRESS settle, some device hardware wants it
-                *  - read ep0 maxpacket even for high and low speed,
-@@ -2318,7 +2320,7 @@ hub_port_init (struct usb_hub *hub, stru
-               udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
-               ep0_reinit(udev);
-       }
--  
-+
-       retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
-       if (retval < (signed)sizeof(udev->descriptor)) {
-               dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
-@@ -2416,7 +2418,7 @@ static void hub_port_connect_change(stru
-       struct device *hub_dev = hub->intfdev;
-       u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
-       int status, i;
-- 
-+
-       dev_dbg (hub_dev,
-               "port %d, status %04x, change %04x, %s\n",
-               port1, portstatus, portchange, portspeed (portstatus));
-@@ -2425,7 +2427,7 @@ static void hub_port_connect_change(stru
-               set_port_led(hub, port1, HUB_LED_AUTO);
-               hub->indicator[port1-1] = INDICATOR_AUTO;
-       }
-- 
-+
-       /* Disconnect any existing devices under this port */
-       if (hdev->children[port1-1])
-               usb_disconnect(&hdev->children[port1-1]);
-@@ -2455,7 +2457,7 @@ static void hub_port_connect_change(stru
-               if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
-                               && !(portstatus & (1 << USB_PORT_FEAT_POWER)))
-                       set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
-- 
-+
-               if (portstatus & USB_PORT_STAT_ENABLE)
-                       goto done;
-               return;
-@@ -2535,7 +2537,7 @@ static void hub_port_connect_change(stru
-                               goto loop_disable;
-                       }
-               }
-- 
-+
-               /* check for devices running slower than they could */
-               if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
-                               && udev->speed == USB_SPEED_FULL
-@@ -2587,7 +2589,7 @@ loop:
-               if (status == -ENOTCONN)
-                       break;
-       }
-- 
-+
- done:
-       hub_port_disable(hub, port1, 1);
- }
-@@ -2720,7 +2722,7 @@ static void hub_events(void)
-                                * EM interference sometimes causes badly
-                                * shielded USB devices to be shutdown by
-                                * the hub, this hack enables them again.
--                               * Works at least with mouse driver. 
-+                               * Works at least with mouse driver.
-                                */
-                               if (!(portstatus & USB_PORT_STAT_ENABLE)
-                                   && !connect_change
-@@ -2750,7 +2752,7 @@ static void hub_events(void)
-                                       "resume on port %d, status %d\n",
-                                       i, ret);
-                       }
--                      
-+
-                       if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
-                               dev_err (hub_dev,
-                                       "over-current change on port %d\n",
-@@ -2985,7 +2987,7 @@ int usb_reset_device(struct usb_device *
-       if (ret < 0)
-               goto re_enumerate;
-- 
-+
-       /* Device might have changed firmware (DFU or similar) */
-       if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor)
-                       || config_descriptors_changed (udev)) {
-@@ -2993,7 +2995,7 @@ int usb_reset_device(struct usb_device *
-               udev->descriptor = descriptor;  /* for disconnect() calls */
-               goto re_enumerate;
-       }
--  
-+
-       if (!udev->actconfig)
-               goto done;
-@@ -3031,7 +3033,7 @@ int usb_reset_device(struct usb_device *
- done:
-       return 0;
-- 
-+
- re_enumerate:
-       hub_port_logical_disconnect(parent_hub, port1);
-       return -ENODEV;
-Index: linux-2.6.22-rc6/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.22-rc6/drivers/usb/host/Kconfig
-@@ -224,3 +224,6 @@ config USB_SL811_CS
-         To compile this driver as a module, choose M here: the
-         module will be called "sl811_cs".
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support"
-+      depends on USB && MIPS_ADM5120
-Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/host/Makefile
-+++ linux-2.6.22-rc6/drivers/usb/host/Makefile
-@@ -8,6 +8,7 @@ endif
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
- obj-$(CONFIG_USB_OHCI_HCD)    += ohci-hcd.o
-Index: linux-2.6.22-rc6/drivers/usb/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/Kconfig
-+++ linux-2.6.22-rc6/drivers/usb/Kconfig
-@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
- source "drivers/usb/image/Kconfig"
--source "drivers/usb/mon/Kconfig"
--
- comment "USB port drivers"
-       depends on USB
-Index: linux-2.6.22-rc6/drivers/usb/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/Makefile
-+++ linux-2.6.22-rc6/drivers/usb/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)   += host/
- obj-$(CONFIG_USB_SL811_HCD)   += host/
- obj-$(CONFIG_USB_U132_HCD)    += host/
- obj-$(CONFIG_USB_OHCI_AT91)   += host/
-+obj-$(CONFIG_USB_ADM5120_HCD)         += host/
- obj-$(CONFIG_USB_ACM)         += class/
- obj-$(CONFIG_USB_PRINTER)     += class/
diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch
deleted file mode 100644 (file)
index 91ca638..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-Index: linux-2.6.22-rc6/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/leds/Kconfig
-+++ linux-2.6.22-rc6/drivers/leds/Kconfig
-@@ -20,6 +20,27 @@ config LEDS_CLASS
- comment "LED drivers"
-+config LEDS_GPIO
-+      tristate "LED support for LEDS on GPIO lines"
-+      depends on LEDS_CLASS && GENERIC_GPIO
-+      help
-+        This option enables support for LEDs connected to GPIO lines
-+
-+config LEDS_ADM5120
-+      tristate "LED Support for ADM5120 GPIO LEDs"
-+      depends on LEDS_GPIO && MIPS_ADM5120
-+      help
-+        This option enables support for LEDs connected to GPIO lines
-+        on ADM5120 SoC based platforms.
-+
-+config LEDS_ADM5120_EXPERIMENTAL
-+      bool "Enable ADM5120 LEDs experimental code"
-+      depends on LEDS_ADM5120
-+
-+config LEDS_ADM5120_DIAG
-+      bool "Enable ADM5120 LEDs diagnostic mode"
-+      depends on LEDS_ADM5120
-+
- config LEDS_CORGI
-       tristate "LED Support for the Sharp SL-C7x0 series"
-       depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.22-rc6/drivers/leds/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/leds/Makefile
-+++ linux-2.6.22-rc6/drivers/leds/Makefile
-@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS)               += led-class.o
- obj-$(CONFIG_LEDS_TRIGGERS)           += led-triggers.o
- # LED Platform Drivers
-+obj-$(CONFIG_LEDS_GPIO)               += leds-gpio.o
-+obj-$(CONFIG_LEDS_ADM5120)            += leds-adm5120.o
- obj-$(CONFIG_LEDS_CORGI)              += leds-corgi.o
- obj-$(CONFIG_LEDS_LOCOMO)             += leds-locomo.o
- obj-$(CONFIG_LEDS_SPITZ)              += leds-spitz.o
diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
deleted file mode 100644 (file)
index 18839cf..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-Index: linux-2.6.22-rc6/arch/mips/pci/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/pci/Makefile
-+++ linux-2.6.22-rc6/arch/mips/pci/Makefile
-@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)       += fixup-
- obj-$(CONFIG_VICTOR_MPC30X)   += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120)     += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
-Index: linux-2.6.22-rc6/include/linux/pci_ids.h
-===================================================================
---- linux-2.6.22-rc6.orig/include/linux/pci_ids.h
-+++ linux-2.6.22-rc6/include/linux/pci_ids.h
-@@ -1712,6 +1712,9 @@
- #define PCI_VENDOR_ID_ESDGMBH         0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
deleted file mode 100644 (file)
index c0fd645..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-Index: linux-2.6.22-rc6/include/asm-mips/byteorder.h
-===================================================================
---- linux-2.6.22-rc6.orig/include/asm-mips/byteorder.h
-+++ linux-2.6.22-rc6/include/asm-mips/byteorder.h
-@@ -58,6 +58,35 @@ static __inline__ __attribute_const__ __
- #endif /* CONFIG_CPU_MIPSR2 */
-+#ifdef CONFIG_ADM5120_HARDWARE_SWAB
-+
-+static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x)
-+{
-+      __asm__ (
-+      "       sh      %2, 0xCA(%1)                    \n"
-+      "       lhu     %0, 0xCC(%1)                    \n"
-+      : "=r" (x)
-+      : "r" (0xB2000000), "r" (x));
-+
-+      return x;
-+}
-+
-+static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x)
-+{
-+      __asm__ (
-+      "       sw      %2, 0xC8(%1)                    \n"
-+      "       lw      %0, 0xCC(%1)                    \n"
-+      : "=r" (x)
-+      : "r" (0xB2000000), "r" (x));
-+
-+      return x;
-+}
-+
-+#define __arch__swab16(x)     ___adm5120__swab16(x)
-+#define __arch__swab32(x)     ___adm5120__swab32(x)
-+
-+#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
-+
- #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
- #  define __BYTEORDER_HAS_U64__
- #  define __SWAB_64_THRU_32__
diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
deleted file mode 100644 (file)
index 2b4381c..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/Kconfig
-@@ -155,6 +155,22 @@ config MTD_AFS_PARTS
-         for your particular device. It won't happen automatically. The
-         'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
-+config MTD_MYLOADER_PARTS
-+      tristate "MyLoader partition parsing"
-+      depends on MIPS_ADM5120 && MTD_PARTITIONS
-+      ---help---
-+        MyLoader is a bootloader which allows the user to define partitions
-+        in flash devices, by putting a table in the second erase block
-+        on the device, similar to a partition table. This table gives the 
-+        offsets and lengths of the user defined partitions.
-+
-+        If you need code which can detect and parse these tables, and
-+        register MTD 'partitions' corresponding to each image detected,
-+        enable this option.
-+
-+        You will still need the parsing functions to be called by the driver
-+        for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- config MTD_CHAR
-Index: linux-2.6.22-rc6/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)     += mtdconcat.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)                += mtdchar.o
diff --git a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch b/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch
deleted file mode 100644 (file)
index 543cb94..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -47,12 +47,17 @@
- #define MANUFACTURER_AMD      0x0001
- #define MANUFACTURER_ATMEL    0x001F
- #define MANUFACTURER_SST      0x00BF
-+#define MANUFACTURER_MACRONIX 0x00C2
- #define SST49LF004B           0x0060
- #define SST49LF040B           0x0050
- #define SST49LF008A           0x005a
- #define AT49BV6416            0x00d6
- #define MANUFACTURER_SAMSUNG  0x00ec
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -217,6 +222,35 @@ static void fixup_use_atmel_lock(struct 
-       mtd->flags |= MTD_STUPID_LOCK;
- }
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 major = extp->MajorVersion;
-+      __u8 minor = extp->MinorVersion;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              if (((major << 8) | minor) != 0x3131)
-+                      break;
-+
-+              if (extp->TopBottom == 2)
-+                      break;
-+
-+              extp->TopBottom = 2;    /* Bottom boot */
-+              printk("%s: weird Macronix chip detected, id:0x%04X, boot location "
-+                      "forced to bottom\n", map->name, cfi->id);
-+      }
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
- #ifdef AMD_BOOTLOC_BUG
-       { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
-@@ -231,6 +265,9 @@ static struct cfi_fixup cfi_fixup_table[
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
-       { 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Force bottom boot for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select 
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
deleted file mode 100644 (file)
index 47378e5..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-Index: linux-2.6.22-rc6/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/kernel/head.S
-+++ linux-2.6.22-rc6/arch/mips/kernel/head.S
-@@ -129,14 +129,19 @@
- #endif
-       .endm
--
-       j kernel_entry
-       nop
--
-+      nop
-+      
-       /*
-        * Reserved space for exception handlers.
-        * Necessary for machines which link their kernels at KSEG0.
-+       * Use as temporary storage for the kernel command line, so that it
-+       * can be updated easily without having to relink the kernel.
-        */
-+       
-+EXPORT(_image_cmdline)
-+      .ascii "CMDLINE:"
-       .align 10
- EXPORT(stext)                                 # used for profiling
diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch
deleted file mode 100644 (file)
index fb503c5..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
-@@ -81,6 +81,12 @@ config MTD_NAND_TS7250
-       help
-         Support for NAND flash on Technologic Systems TS-7250 platform.
-+config MTD_NAND_RB100
-+      tristate "NAND Flash device on RB100 board"
-+      depends on MTD_NAND
-+      help
-+        Support for NAND flash on RB100 platform.
-+
- config MTD_NAND_IDS
-       tristate
-Index: linux-2.6.22-rc6/drivers/mtd/nand/Makefile
-===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/nand/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/nand/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)          += cafe_nan
- obj-$(CONFIG_MTD_NAND_SPIA)           += spia.o
- obj-$(CONFIG_MTD_NAND_AMS_DELTA)      += ams-delta.o
- obj-$(CONFIG_MTD_NAND_TOTO)           += toto.o
-+obj-$(CONFIG_MTD_NAND_RB100)          += rbmipsnand.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12)               += autcpu12.o
- obj-$(CONFIG_MTD_NAND_EDB7312)                += edb7312.o
- obj-$(CONFIG_MTD_NAND_AU1550)         += au1550nd.o
diff --git a/target/linux/adm5120eb-2.6/patches-2.6.22 b/target/linux/adm5120eb-2.6/patches-2.6.22
new file mode 120000 (symlink)
index 0000000..377f3ad
--- /dev/null
@@ -0,0 +1 @@
+../adm5120-2.6/patches-2.6.22
\ No newline at end of file