ramips: make rt3883 usb work properly
authorJohn Crispin <john@openwrt.org>
Mon, 24 Jun 2013 12:06:56 +0000 (12:06 +0000)
committerJohn Crispin <john@openwrt.org>
Mon, 24 Jun 2013 12:06:56 +0000 (12:06 +0000)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37024

target/linux/ramips/patches-3.9/0160-USB-phy-add-ralink-SoC-driver.patch
target/linux/ramips/rt3883/config-3.9

index 095f911809a6dca4f6a539592d217bba3faa2b4b..95948dd244d44590cdfc77d944daff30a207c7e2 100644 (file)
@@ -11,11 +11,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 200 insertions(+)
  create mode 100644 drivers/usb/phy/ralink-phy.c
 
-diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
-index 9054938..b197c70 100644
---- a/drivers/usb/phy/Kconfig
-+++ b/drivers/usb/phy/Kconfig
-@@ -74,3 +74,11 @@ config SAMSUNG_USBPHY
+Index: linux-3.9.6/drivers/usb/phy/Kconfig
+===================================================================
+--- linux-3.9.6.orig/drivers/usb/phy/Kconfig   2013-06-13 19:52:08.000000000 +0200
++++ linux-3.9.6/drivers/usb/phy/Kconfig        2013-06-23 16:37:57.544772712 +0200
+@@ -74,3 +74,11 @@
        help
          Enable this to support Samsung USB phy controller for samsung
          SoCs.
@@ -27,20 +27,19 @@ index 9054938..b197c70 100644
 +      help
 +        Enable this to support ralink USB phy controller for ralink
 +        SoCs.
-diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
-index b13faa1..2df30f1 100644
---- a/drivers/usb/phy/Makefile
-+++ b/drivers/usb/phy/Makefile
-@@ -12,3 +12,4 @@ obj-$(CONFIG_MV_U3D_PHY)             += mv_u3d_phy.o
+Index: linux-3.9.6/drivers/usb/phy/Makefile
+===================================================================
+--- linux-3.9.6.orig/drivers/usb/phy/Makefile  2013-06-13 19:52:08.000000000 +0200
++++ linux-3.9.6/drivers/usb/phy/Makefile       2013-06-23 16:37:57.544772712 +0200
+@@ -12,3 +12,4 @@
  obj-$(CONFIG_USB_EHCI_TEGRA)  += tegra_usb_phy.o
  obj-$(CONFIG_USB_RCAR_PHY)            += rcar-phy.o
  obj-$(CONFIG_SAMSUNG_USBPHY)          += samsung-usbphy.o
 +obj-$(CONFIG_RALINK_USBPHY)           += ralink-phy.o
-diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c
-new file mode 100644
-index 0000000..3fbabea
---- /dev/null
-+++ b/drivers/usb/phy/ralink-phy.c
+Index: linux-3.9.6/drivers/usb/phy/ralink-phy.c
+===================================================================
+--- /dev/null  1970-01-01 00:00:00.000000000 +0000
++++ linux-3.9.6/drivers/usb/phy/ralink-phy.c   2013-06-24 13:55:19.932135036 +0200
 @@ -0,0 +1,191 @@
 +/*
 + * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
@@ -99,8 +98,8 @@ index 0000000..3fbabea
 +
 +              usb_phy_enable(1);
 +
-+              reset_control_assert(rstdev);
-+              reset_control_assert(rsthost);
++//            reset_control_assert(rstdev);
++//            reset_control_assert(rsthost);
 +
 +              if (OTG_STATE_B_HOST) {
 +                      rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
@@ -233,6 +232,3 @@ index 0000000..3fbabea
 +MODULE_LICENSE("GPL v2");
 +MODULE_DESCRIPTION("Ralink USB phy");
 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
--- 
-1.7.10.4
-
index e8dab5859cacf22879715116fcb8b5fbc02f355c..8bf49154bf67845a1d97f7a559e32767c3495b99 100644 (file)
@@ -128,7 +128,7 @@ CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_RALINK=y
-# CONFIG_RALINK_USBPHY is not set
+CONFIG_RALINK_USBPHY=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
@@ -158,6 +158,7 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_UIDGID_CONVERTED=y
 CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USE_OF=y
 CONFIG_WATCHDOG_CORE=y