package/network/config/ltq-vdsl-app/files/dsl_control

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2012 OpenWrt.org
   3
   4 # needs to start before the atm layer which starts at 50
   5 START=48
   6 USE_PROCD=1
   7
   8 EXTRA_COMMANDS="status lucistat"
   9 EXTRA_HELP="    status  Get DSL status information
  10         lucistat  Get status information if lua friendly format"
  11
  12 [ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
  13
  14 #
  15 # ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
  16 #
  17 # G.992.1 Annex A
  18 # G.992.3 Annex A / L-US1 / L_US-2 / M
  19 # G.992.5 Annex A / M
  20 # G.993.2 Annex A/B/C
  21 xtse_xdsl_a="04_00_04_00_4C_01_04_07"
  22
  23 # G.992.1 Annex B
  24 # G.992.3 Annex B
  25 # G.992.5 Annex B
  26 # G.993.2 Annex A/B/C
  27 xtse_adsl_b="10_00_10_00_00_04_00_07"
  28
  29 # G.992.1 Annex B
  30 # G.992.3 Annex B
  31 # G.992.3 Annex J
  32 # G.992.5 Annex B
  33 # G.992.5 Annex J
  34 # G.993.2 Annex A/B/C
  35 xtse_adsl_j="10_00_10_40_00_04_01_07"
  36
  37 service_triggers() {
  38         procd_add_reload_trigger network
  39 }
  40
  41 start_service() {
  42         local annex
  43         local firmware
  44         local xtse
  45         local mode
  46
  47         config_load network
  48         config_get annex dsl annex
  49         config_get firmware dsl firmware
  50         config_get xfer_mode dsl xfer_mode
  51
  52         [ -z "${xfer_mode}" ] && xfer_mode=ptm
  53
  54         case "${xfer_mode}" in
  55         atm)
  56                 LOAD=ltq_atm_vr9
  57                 UNLOAD=ltq_ptm_vr9
  58                 mode=1
  59                 ;;
  60         *)
  61                 LOAD=ltq_ptm_vr9
  62                 UNLOAD=ltq_atm_vr9
  63                 mode=2
  64                 ;;
  65         esac
  66
  67         eval "xtse=\"\${xtse_xdsl_$annex}\""
  68
  69         [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
  70         [ -f "${firmware}" ] || {
  71                 echo failed to find $firmware
  72                 return 1
  73         }
  74
  75         procd_open_instance
  76         procd_set_param command /sbin/vdsl_cpe_control_wrapper \
  77                         -i$xtse \
  78                         -n /sbin/dsl_notify.sh \
  79                         -f ${firmware} \
  80                         -M ${mode}
  81         procd_append_param env "LOAD=$LOAD" "UNLOAD=$UNLOAD"
  82         procd_close_instance
  83 }
  84
  85 stop_service() {
  86         DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
  87         DSL_INTERFACE_STATUS="DOWN" \
  88                 /sbin/dsl_notify.sh
  89 }