package/network/config/ltq-vdsl-app/files/dsl_control

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2012 OpenWrt.org
   3
   4 # needs to start before the atm layer which starts at 50
   5 START=48
   6 USE_PROCD=1
   7
   8 EXTRA_COMMANDS="status lucistat"
   9 EXTRA_HELP="    status  Get DSL status information
  10         lucistat  Get status information if lua friendly format"
  11
  12 [ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
  13
  14 #
  15 # ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
  16 # ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable (VECTORMODE_ENABLE))
  17 #
  18 # G.992.1 Annex A
  19 # G.992.3 Annex A / L-US1 / L_US-2 / M
  20 # G.992.5 Annex A / M
  21 # G.993.2 Annex A/B/C
  22 # G.993.5 Annex A/B/C
  23 xtse_xdsl_a="04_00_04_00_4C_01_04_0F"
  24
  25 # G.992.1 Annex B
  26 # G.992.3 Annex B
  27 # G.992.5 Annex B
  28 # G.993.2 Annex A/B/C
  29 # G.993.5 Annex A/B/C
  30 xtse_xdsl_b="10_00_10_00_00_04_00_0F"
  31
  32 # G.992.1 Annex B
  33 # G.992.3 Annex B
  34 # G.992.3 Annex J
  35 # G.992.5 Annex B
  36 # G.992.5 Annex J
  37 # G.993.2 Annex A/B/C
  38 # G.993.5 Annex A/B/C
  39 xtse_xdsl_j="10_00_10_40_00_04_01_0F"
  40
  41 service_triggers() {
  42         procd_add_reload_trigger network
  43 }
  44
  45 start_service() {
  46         local annex
  47         local firmware
  48         local xtse
  49         local mode
  50
  51         config_load network
  52         config_get annex dsl annex
  53         config_get firmware dsl firmware
  54         config_get xfer_mode dsl xfer_mode
  55
  56         [ -z "${xfer_mode}" ] && xfer_mode=ptm
  57
  58         case "${xfer_mode}" in
  59         atm)
  60                 LOAD=ltq_atm_vr9
  61                 UNLOAD=ltq_ptm_vr9
  62                 mode=1
  63                 ;;
  64         *)
  65                 LOAD=ltq_ptm_vr9
  66                 UNLOAD=ltq_atm_vr9
  67                 mode=2
  68                 ;;
  69         esac
  70
  71         eval "xtse=\"\${xtse_xdsl_$annex}\""
  72
  73         [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
  74         [ -f "${firmware}" ] || {
  75                 echo failed to find $firmware
  76                 return 1
  77         }
  78
  79         procd_open_instance
  80         procd_set_param command /sbin/vdsl_cpe_control_wrapper \
  81                         -i$xtse \
  82                         -n /sbin/dsl_notify.sh \
  83                         -f ${firmware} \
  84                         -M ${mode}
  85         procd_append_param env "LOAD=$LOAD" "UNLOAD=$UNLOAD"
  86         procd_close_instance
  87 }
  88
  89 stop_service() {
  90         DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
  91         DSL_INTERFACE_STATUS="DOWN" \
  92                 /sbin/dsl_notify.sh
  93 }