target/linux/atheros/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2 if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -a -x /sbin/swconfig ]; then
   3         uci batch <<EOF
   4 set network.eth0=switch
   5 set network.eth0.reset=1
   6 set network.eth0.enable_vlan=1
   7 set network.eth0_1=switch_vlan
   8 set network.eth0_1.device=eth0
   9 set network.eth0_1.vlan=1
  10 set network.eth0_1.ports="0 1 2 3 5t"
  11 set network.eth0_2=switch_vlan
  12 set network.eth0_2.device=eth0
  13 set network.eth0_2.vlan=2
  14 set network.eth0_2.ports="4 5t"
  15 EOF
  16         HAS_SWITCH=1
  17 fi
  18
  19 if [ -n "$HAS_SWITCH" -o \
  20         -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
  21         -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
  22         uci batch <<EOF
  23 set network.lan.ifname=eth0.1
  24 set network.wan=interface
  25 set network.wan.ifname=eth0.2
  26 set network.wan.proto=dhcp
  27 EOF
  28         HAS_SWITCH=1
  29 fi
  30
  31 [ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && {
  32         uci batch <<EOF
  33 set network.wan=interface
  34 set network.wan.ifname=eth1
  35 set network.wan.proto=dhcp
  36 EOF
  37 }
  38
  39 uci commit network