target/linux/ramips/dts/V11STFE.dts

   1 /dts-v1/;
   2
   3 /include/ "rt2880.dtsi"
   4
   5 / {
   6         compatible = "V11ST-FE", "ralink,rt2880-soc";
   7         model = "Ralink V11ST-FE";
   8
   9         palmbus@300000 {
  10                 gpio0: gpio@600 {
  11                         status = "okay";
  12                 };
  13         };
  14
  15         ethernet@400000 {
  16                 status = "okay";
  17         };
  18
  19         wmac@480000 {
  20                 ralink,mtd-eeprom = <&factory 0>;
  21         };
  22
  23         pci@10140000 {
  24                 status = "okay";
  25
  26                 host-bridge {
  27                         pci-bridge@1 {
  28                                 status = "okay";
  29                         };
  30                 };
  31         };
  32
  33         nor-flash@1c000000 {
  34                 compatible = "cfi-flash";
  35                 reg = <0x1c000000 0x800000>;
  36
  37                 bank-width = <2>;
  38                 #address-cells = <1>;
  39                 #size-cells = <1>;
  40
  41                 partition@0 {
  42                         reg = <0x0 0x0030000>;
  43                         label = "u-boot";
  44                         read-only;
  45                 };
  46
  47                 partition@30000 {
  48                         reg = <0x00030000 0x00010000>;
  49                         label = "u-boot-env";
  50                         read-only;
  51                 };
  52
  53                 factory: partition@40000 {
  54                         reg = <0x00040000 0x00010000>;
  55                         label = "factory";
  56                         read-only;
  57                 };
  58
  59                 partition@50000 {
  60                         reg = <0x00050000 0x003b0000>;
  61                         label = "firmware";
  62                 };
  63         };
  64
  65         gpio-keys-polled {
  66                 compatible = "gpio-keys-polled";
  67                 #address-cells = <1>;
  68                 #size-cells = <0>;
  69                 poll-interval = <100>;
  70                 wps {
  71                         label = "wps";
  72                         gpios = <&gpio0 0 0>;
  73                         linux,code = <0x211>;
  74                 };
  75         };
  76
  77         gpio-leds {
  78                 compatible = "gpio-leds";
  79
  80                 status {
  81                         label = "v11st-fe:green:status";
  82                         gpios = <&gpio0 12 1>;
  83                 };
  84         };
  85 };