[ramips] move memory detect node to dtsi files
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WNCE2001.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 #address-cells = <1>;
7 #size-cells = <1>;
8 compatible = "WNCE2001", "ralink,rt3052-soc";
9 model = "Netgear WNCE2001";
10
11 chosen {
12 bootargs = "console=ttyS0,115200";
13 };
14
15 palmbus@10000000 {
16 sysc@0 {
17 ralink,pinmux = "spi", "uartlite", "jtag", "sdram";
18 ralink,gpiomux = "i2c", "mdio", "rgmii";
19 ralink,uartmux = "gpio";
20 ralink,wdtmux = <1>;
21 };
22
23 gpio0: gpio@600 {
24 status = "okay";
25 };
26
27 spi@b00 {
28 status = "okay";
29 m25p80@0 {
30 #address-cells = <1>;
31 #size-cells = <1>;
32 compatible = "mx25l3205d";
33 reg = <0 0>;
34 linux,modalias = "m25p80", "mx25l3205d";
35 spi-max-frequency = <10000000>;
36
37 partition@0 {
38 label = "u-boot";
39 reg = <0x0 0x30000>;
40 read-only;
41 };
42
43 factory: partition@30000 {
44 label = "factory";
45 reg = <0x30000 0x10000>;
46 read-only;
47 };
48
49 partition@40000 {
50 label = "config";
51 reg = <0x40000 0x20000>;
52 read-only;
53 };
54
55 partition@60000 {
56 label = "language";
57 reg = <0x60000 0x30000>;
58 read-only;
59 };
60
61 partition@90000 {
62 label = "pot";
63 reg = <0x90000 0x10000>;
64 read-only;
65 };
66
67 partition@a0000 {
68 label = "checksum";
69 reg = <0xa0000 0x10000>;
70 };
71
72 partition@b0000 {
73 label = "firmware";
74 reg = <0xb0000 0x350000>;
75 };
76 };
77 };
78 };
79
80 ethernet@10100000 {
81 status = "okay";
82 };
83
84 esw@10110000 {
85 status = "okay";
86 };
87
88 wmac@10180000 {
89 status = "okay";
90 };
91
92 gpio-leds {
93 compatible = "gpio-leds";
94 power-green {
95 label = "netgear:green:power";
96 gpios = <&gpio0 8 1>;
97 };
98 power-red {
99 label = "netgear:red:power";
100 gpios = <&gpio0 9 1>;
101 };
102 wlan-green {
103 label = "netgear:green:wlan";
104 gpios = <&gpio0 12 0>;
105 };
106 wlan-red {
107 label = "netgear:red:wlan";
108 gpios = <&gpio0 13 0>;
109 };
110 };
111
112 gpio-keys-polled {
113 compatible = "gpio-keys-polled";
114 #address-cells = <1>;
115 #size-cells = <0>;
116 poll-interval = <20>;
117 reset {
118 label = "reset";
119 gpios = <&gpio0 10 1>;
120 linux,code = <0x198>;
121 };
122 wps {
123 label = "wps";
124 gpios = <&gpio0 0 1>;
125 linux,code = <0x211>;
126 };
127 rt {
128 label = "rt";
129 gpios = <&gpio0 11 1>;
130 linux,code = <0x100>;
131 };
132 ap {
133 label = "ap";
134 gpios = <&gpio0 7 1>;
135 linux,code = <0x101>;
136 };
137 };
138 };