+++ /dev/null
-/*
- * Driver for AMAZONASC serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/serial_s3c2400.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2004 Infineon IFAP DC COM CPE
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/serial.h>
-
-#define PORT_AMAZONASC 111
-
-#include <linux/serial_core.h>
-
-#define UART_NR 1
-
-#define UART_DUMMY_UER_RX 1
-
-#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR
-#define CALLOUT_AMAZONASC_MAJOR TTYAUX_MAJOR
-#define SERIAL_AMAZONASC_MINOR 64
-#define SERIAL_AMAZONASC_NR UART_NR
-
-static void amazonasc_tx_chars(struct uart_port *port);
-static struct uart_port amazonasc_ports[UART_NR];
-static struct uart_driver amazonasc_reg;
-static unsigned int uartclk = 0;
-
-static void amazonasc_stop_tx(struct uart_port *port)
-{
- /* fifo underrun shuts up after firing once */
- return;
-}
-
-static void amazonasc_start_tx(struct uart_port *port)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- amazonasc_tx_chars(port);
- local_irq_restore(flags);
-
- return;
-}
-
-static void amazonasc_stop_rx(struct uart_port *port)
-{
- /* clear the RX enable bit */
- amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON);
-}
-
-static void amazonasc_enable_ms(struct uart_port *port)
-{
- /* no modem signals */
- return;
-}
-
-#include <linux/version.h>
-
-static void
-amazonasc_rx_chars(struct uart_port *port)
-{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
- struct tty_struct *tty = port->state->port.tty;
-#else
- struct tty_struct *tty = port->info->port.tty;
-#endif
- unsigned int ch = 0, rsr = 0, fifocnt;
-
- fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
- while (fifocnt--)
- {
- u8 flag = TTY_NORMAL;
- ch = amazon_readl(AMAZON_ASC_RBUF);
- rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX;
- tty_flip_buffer_push(tty);
- port->icount.rx++;
-
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- if (rsr & ASCCON_ANY) {
- if (rsr & ASCCON_PE) {
- port->icount.parity++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE);
- } else if (rsr & ASCCON_FE) {
- port->icount.frame++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE);
- }
- if (rsr & ASCCON_OE) {
- port->icount.overrun++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE);
- }
-
- rsr &= port->read_status_mask;
-
- if (rsr & ASCCON_PE)
- flag = TTY_PARITY;
- else if (rsr & ASCCON_FE)
- flag = TTY_FRAME;
- }
-
- if ((rsr & port->ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
-
- if (rsr & ASCCON_OE)
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
- if (ch != 0)
- tty_flip_buffer_push(tty);
-
- return;
-}
-
-
-static void amazonasc_tx_chars(struct uart_port *port)
-{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
- struct circ_buf *xmit = &port->state->xmit;
-#else
- struct circ_buf *xmit = &port->info->xmit;
-#endif
-
- if (uart_tx_stopped(port)) {
- amazonasc_stop_tx(port);
- return;
- }
-
- while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL)
- {
- if (port->x_char) {
- amazon_writel(port->x_char, AMAZON_ASC_TBUF);
- port->icount.tx++;
- port->x_char = 0;
- continue;
- }
-
- if (uart_circ_empty(xmit))
- break;
-
- amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-}
-
-static irqreturn_t amazonasc_tx_int(int irq, void *port)
-{
- amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1);
- amazonasc_start_tx(port);
-
- /* clear any pending interrupts */
- amazon_writel_masked(AMAZON_ASC_WHBCON,
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t amazonasc_er_int(int irq, void *port)
-{
- /* clear any pending interrupts */
- amazon_writel_masked(AMAZON_ASC_WHBCON,
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t amazonasc_rx_int(int irq, void *port)
-{
- amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1);
- amazonasc_rx_chars((struct uart_port *) port);
- return IRQ_HANDLED;
-}
-
-static u_int amazonasc_tx_empty(struct uart_port *port)
-{
- int status;
-
- /*
- * FSTAT tells exactly how many bytes are in the FIFO.
- * The question is whether we really need to wait for all
- * 16 bytes to be transmitted before reporting that the
- * transmitter is empty.
- */
- status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
- return status ? 0 : TIOCSER_TEMT;
-}
-
-static u_int amazonasc_get_mctrl(struct uart_port *port)
-{
- /* no modem control signals - the readme says to pretend all are set */
- return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR;
-}
-
-static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl)
-{
- /* no modem control - just return */
- return;
-}
-
-static void amazonasc_break_ctl(struct uart_port *port, int break_state)
-{
- /* no way to send a break */
- return;
-}
-
-static int amazonasc_startup(struct uart_port *port)
-{
- unsigned int con = 0;
- unsigned long flags;
- int retval;
-
- /* this assumes: CON.BRS = CON.FDE = 0 */
- if (uartclk == 0)
- uartclk = amazon_get_fpi_hz();
-
- amazonasc_ports[0].uartclk = uartclk;
-
- local_irq_save(flags);
-
- /* this setup was probably already done in u-boot */
- /* ASC and GPIO Port 1 bits 3 and 4 share the same pins
- * P1.3 (RX) in, Alternate 10
- * P1.4 (TX) in, Alternate 10
- */
- amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); //P1.4 output, P1.3 input
- amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); //ALTSETL0 11
- amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0); //ALTSETL1 00
- amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10);
-
- /* set up the CLC */
- amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0);
- amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET);
-
- /* asynchronous mode */
- con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN;
-
- /* choose the line - there's only one */
- amazon_writel(0, AMAZON_ASC_PISEL);
- amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
- AMAZON_ASC_TXFCON);
- amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
- AMAZON_ASC_RXFCON);
- wmb();
-
- amazon_writel_masked(AMAZON_ASC_CON, con, con);
-
- retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port);
- if (retval){
- printk("failed to request amazonasc_rx_int\n");
- return retval;
- }
- retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port);
- if (retval){
- printk("failed to request amazonasc_tx_int\n");
- goto err1;
- }
-
- retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port);
- if (retval){
- printk("failed to request amazonasc_er_int\n");
- goto err2;
- }
-
- local_irq_restore(flags);
- return 0;
-
-err2:
- free_irq(AMAZONASC_TIR, port);
-
-err1:
- free_irq(AMAZONASC_RIR, port);
- local_irq_restore(flags);
- return retval;
-}
-
-static void amazonasc_shutdown(struct uart_port *port)
-{
- free_irq(AMAZONASC_RIR, port);
- free_irq(AMAZONASC_TIR, port);
- free_irq(AMAZONASC_EIR, port);
- /*
- * disable the baudrate generator to disable the ASC
- */
- amazon_writel(0, AMAZON_ASC_CON);
-
- /* flush and then disable the fifos */
- amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU);
- amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0);
- amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU);
- amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0);
-}
-
-static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
-{
- unsigned int cflag;
- unsigned int iflag;
- unsigned int baud, quot;
- unsigned int con = 0;
- unsigned long flags;
-
- cflag = new->c_cflag;
- iflag = new->c_iflag;
-
- /* byte size and parity */
- switch (cflag & CSIZE) {
- /* 7 bits are always with parity */
- case CS7: con = ASCCON_M_7ASYNCPAR; break;
- /* the ASC only suports 7 and 8 bits */
- case CS5:
- case CS6:
- default:
- if (cflag & PARENB)
- con = ASCCON_M_8ASYNCPAR;
- else
- con = ASCCON_M_8ASYNC;
- break;
- }
- if (cflag & CSTOPB)
- con |= ASCCON_STP;
- if (cflag & PARENB) {
- if (!(cflag & PARODD))
- con &= ~ASCCON_ODD;
- else
- con |= ASCCON_ODD;
- }
-
- port->read_status_mask = ASCCON_OE;
- if (iflag & INPCK)
- port->read_status_mask |= ASCCON_FE | ASCCON_PE;
-
- port->ignore_status_mask = 0;
- if (iflag & IGNPAR)
- port->ignore_status_mask |= ASCCON_FE | ASCCON_PE;
-
- if (iflag & IGNBRK) {
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (iflag & IGNPAR)
- port->ignore_status_mask |= ASCCON_OE;
- }
-
- /*
- * Ignore all characters if CREAD is not set.
- */
- if ((cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_DUMMY_UER_RX;
-
- /* set error signals - framing, parity and overrun */
- con |= ASCCON_FEN;
- con |= ASCCON_OEN;
- con |= ASCCON_PEN;
- /* enable the receiver */
- con |= ASCCON_REN;
-
- /* block the IRQs */
- local_irq_save(flags);
-
- /* set up CON */
- amazon_writel(con, AMAZON_ASC_CON);
-
- /* Set baud rate - take a divider of 2 into account */
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
- quot = quot/2 - 1;
-
- /* the next 3 probably already happened when we set CON above */
- /* disable the baudrate generator */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0);
- /* make sure the fractional divider is off */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0);
- /* set up to use divisor of 2 */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0);
- /* now we can write the new baudrate into the register */
- amazon_writel(quot, AMAZON_ASC_BTR);
- /* turn the baudrate generator back on */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R);
-
- local_irq_restore(flags);
-}
-
-static const char *amazonasc_type(struct uart_port *port)
-{
- return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'
- */
-static void amazonasc_release_port(struct uart_port *port)
-{
- return;
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int amazonasc_request_port(struct uart_port *port)
-{
- return 0;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void amazonasc_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE) {
- port->type = PORT_AMAZONASC;
- amazonasc_request_port(port);
- }
-}
-
-/*
- * verify the new serial_struct (for TIOCSSERIAL).
- */
-static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- int ret = 0;
- if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC)
- ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
- ret = -EINVAL;
- if (ser->baud_base < 9600)
- ret = -EINVAL;
- return ret;
-}
-
-static struct uart_ops amazonasc_pops = {
- .tx_empty = amazonasc_tx_empty,
- .set_mctrl = amazonasc_set_mctrl,
- .get_mctrl = amazonasc_get_mctrl,
- .stop_tx = amazonasc_stop_tx,
- .start_tx = amazonasc_start_tx,
- .stop_rx = amazonasc_stop_rx,
- .enable_ms = amazonasc_enable_ms,
- .break_ctl = amazonasc_break_ctl,
- .startup = amazonasc_startup,
- .shutdown = amazonasc_shutdown,
- .set_termios = amazonasc_set_termios,
- .type = amazonasc_type,
- .release_port = amazonasc_release_port,
- .request_port = amazonasc_request_port,
- .config_port = amazonasc_config_port,
- .verify_port = amazonasc_verify_port,
-};
-
-static struct uart_port amazonasc_ports[UART_NR] = {
- {
- membase: (void *)AMAZON_ASC,
- mapbase: AMAZON_ASC,
- iotype: SERIAL_IO_MEM,
- irq: AMAZONASC_RIR, /* RIR */
- uartclk: 0, /* filled in dynamically */
- fifosize: 16,
- unused: { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */
- type: PORT_AMAZONASC,
- ops: &amazonasc_pops,
- flags: ASYNC_BOOT_AUTOCONF,
- },
-};
-
-static void amazonasc_console_write(struct console *co, const char *s, u_int count)
-{
- int i, fifocnt;
- unsigned long flags;
- local_irq_save(flags);
- for (i = 0; i < count;)
- {
- /* wait until the FIFO is not full */
- do
- {
- fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF;
- } while (fifocnt == AMAZONASC_TXFIFO_FULL);
- if (s[i] == '\0')
- {
- break;
- }
- if (s[i] == '\n')
- {
- amazon_writel('\r', AMAZON_ASC_TBUF);
- do
- {
- fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) &
- ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF;
- } while (fifocnt == AMAZONASC_TXFIFO_FULL);
- }
- amazon_writel(s[i], AMAZON_ASC_TBUF);
- i++;
- }
-
- local_irq_restore(flags);
-}
-
-static void __init
-amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-{
- u_int lcr_h;
-
- lcr_h = amazon_readl(AMAZON_ASC_CON);
- /* do this only if the ASC is turned on */
- if (lcr_h & ASCCON_R) {
- u_int quot, div, fdiv, frac;
-
- *parity = 'n';
- if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR ||
- (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) {
- if (lcr_h & ASCCON_ODD)
- *parity = 'o';
- else
- *parity = 'e';
- }
-
- if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR)
- *bits = 7;
- else
- *bits = 8;
-
- quot = amazon_readl(AMAZON_ASC_BTR) + 1;
-
- /* this gets hairy if the fractional divider is used */
- if (lcr_h & ASCCON_FDE)
- {
- div = 1;
- fdiv = amazon_readl(AMAZON_ASC_FDV);
- if (fdiv == 0)
- fdiv = 512;
- frac = 512;
- }
- else
- {
- div = lcr_h & ASCCON_BRS ? 3 : 2;
- fdiv = frac = 1;
- }
- /*
- * This doesn't work exactly because we use integer
- * math to calculate baud which results in rounding
- * errors when we try to go from quot -> baud !!
- * Try to make this work for both the fractional divider
- * and the simple divider. Also try to avoid rounding
- * errors using integer math.
- */
-
- *baud = frac * (port->uartclk / (div * 512 * 16 * quot));
- if (*baud > 1100 && *baud < 2400)
- *baud = 1200;
- if (*baud > 2300 && *baud < 4800)
- *baud = 2400;
- if (*baud > 4700 && *baud < 9600)
- *baud = 4800;
- if (*baud > 9500 && *baud < 19200)
- *baud = 9600;
- if (*baud > 19000 && *baud < 38400)
- *baud = 19200;
- if (*baud > 38400 && *baud < 57600)
- *baud = 38400;
- if (*baud > 57600 && *baud < 115200)
- *baud = 57600;
- if (*baud > 115200 && *baud < 230400)
- *baud = 115200;
- }
-}
-
-static int __init amazonasc_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 115200;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /* this assumes: CON.BRS = CON.FDE = 0 */
- if (uartclk == 0)
- uartclk = amazon_get_fpi_hz();
- co->index = 0;
- port = &amazonasc_ports[0];
- amazonasc_ports[0].uartclk = uartclk;
- amazonasc_ports[0].type = PORT_AMAZONASC;
-
- if (options){
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- }
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver amazonasc_reg;
-static struct console amazonasc_console = {
- name: "ttyS",
- write: amazonasc_console_write,
- device: uart_console_device,
- setup: amazonasc_console_setup,
- flags: CON_PRINTBUFFER,
- index: -1,
- data: &amazonasc_reg,
-};
-
-static struct uart_driver amazonasc_reg = {
- .owner = THIS_MODULE,
- .driver_name = "serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = UART_NR,
- .cons = &amazonasc_console,
-};
-
-static int amazon_asc_probe(struct platform_device *dev)
-{
- unsigned char res;
- uart_register_driver(&amazonasc_reg);
- res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]);
- return res;
-}
-
-static int amazon_asc_remove(struct platform_device *dev)
-{
- uart_unregister_driver(&amazonasc_reg);
- return 0;
-}
-
-static struct platform_driver amazon_asc_driver = {
- .probe = amazon_asc_probe,
- .remove = amazon_asc_remove,
- .driver = {
- .name = "amazon_asc",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init amazon_asc_init(void)
-{
- int ret = platform_driver_register(&amazon_asc_driver);
- if (ret)
- printk(KERN_WARNING "amazon_asc: error registering platfom driver!\n");
- return ret;
-}
-
-static void __exit amazon_asc_cleanup(void)
-{
- platform_driver_unregister(&amazon_asc_driver);
-}
-
-module_init(amazon_asc_init);
-module_exit(amazon_asc_cleanup);
-
-MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin");
-MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver");
-MODULE_LICENSE("GPL");
-
projects / openwrt / svn-archive / archive.git / blobdiff