amazon: R.I.P.
authorJohn Crispin <john@openwrt.org>
Fri, 5 Dec 2014 00:19:40 +0000 (00:19 +0000)
committerJohn Crispin <john@openwrt.org>
Fri, 5 Dec 2014 00:19:40 +0000 (00:19 +0000)
its been broken for 2 1/2 years

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43516

51 files changed:
target/linux/amazon/Makefile [deleted file]
target/linux/amazon/base-files/etc/config/network [deleted file]
target/linux/amazon/config-3.3 [deleted file]
target/linux/amazon/files/arch/mips/amazon/Kconfig [deleted file]
target/linux/amazon/files/arch/mips/amazon/Makefile [deleted file]
target/linux/amazon/files/arch/mips/amazon/board.c [deleted file]
target/linux/amazon/files/arch/mips/amazon/dma-core.c [deleted file]
target/linux/amazon/files/arch/mips/amazon/dma-core.h [deleted file]
target/linux/amazon/files/arch/mips/amazon/interrupt.c [deleted file]
target/linux/amazon/files/arch/mips/amazon/pci.c [deleted file]
target/linux/amazon/files/arch/mips/amazon/prom.c [deleted file]
target/linux/amazon/files/arch/mips/amazon/setup.c [deleted file]
target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h [deleted file]
target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h [deleted file]
target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h [deleted file]
target/linux/amazon/files/drivers/atm/amazon_tpe.c [deleted file]
target/linux/amazon/files/drivers/char/amazon_mei.c [deleted file]
target/linux/amazon/files/drivers/char/ifx_ssc.c [deleted file]
target/linux/amazon/files/drivers/mtd/maps/amazon.c [deleted file]
target/linux/amazon/files/drivers/net/ethernet/admmod.c [deleted file]
target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c [deleted file]
target/linux/amazon/files/drivers/tty/serial/amazon_asc.c [deleted file]
target/linux/amazon/files/drivers/watchdog/amazon_wdt.c [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/adm6996.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/irq.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/model.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/port.h [deleted file]
target/linux/amazon/files/include/asm-mips/amazon/serial.h [deleted file]
target/linux/amazon/image/Makefile [deleted file]
target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch [deleted file]
target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch [deleted file]
target/linux/amazon/patches-3.3/017-wdt-driver.patch [deleted file]
target/linux/amazon/patches-3.3/100-board.patch [deleted file]
target/linux/amazon/patches-3.3/130-mtd_drivers.patch [deleted file]
target/linux/amazon/patches-3.3/140-net_drivers.patch [deleted file]
target/linux/amazon/patches-3.3/150-serial_driver.patch [deleted file]
target/linux/amazon/patches-3.3/160-cfi-swap.patch [deleted file]

diff --git a/target/linux/amazon/Makefile b/target/linux/amazon/Makefile
deleted file mode 100644 (file)
index 9553da0..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mips
-BOARD:=amazon
-BOARDNAME:=Infineon Amazon
-FEATURES:=squashfs broken
-KERNEL_PATCHVER:=3.3
-
-include $(INCLUDE_DIR)/target.mk
-
-define Target/Description
-       Build firmware images for Infineon Amazon boards
-endef
-
-define Kernel/Prepare
-       $(call Kernel/Prepare/Default)
-       mkdir -p $(LINUX_DIR)/arch/mips/include/asm/amazon
-       $(CP) $(LINUX_DIR)/include/asm-mips/amazon/*.h $(LINUX_DIR)/arch/mips/include/asm/amazon
-endef
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/amazon/base-files/etc/config/network b/target/linux/amazon/base-files/etc/config/network
deleted file mode 100644 (file)
index 9745944..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
-       option ifname   lo
-       option proto    static
-       option ipaddr   127.0.0.1
-       option netmask  255.0.0.0
-
-config interface lan
-       option ifname   eth1
-       option type     bridge
-       option proto    static
-       option ipaddr   192.168.1.1
-       option netmask  255.255.255.0
-       option ip6assign 60
-
-config globals globals
-       option ula_prefix auto
diff --git a/target/linux/amazon/config-3.3 b/target/linux/amazon/config-3.3
deleted file mode 100644 (file)
index d30e221..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
-CONFIG_ADM6996_SUPPORT=y
-CONFIG_AMAZON=y
-CONFIG_AMAZON_ASC_UART=y
-CONFIG_AMAZON_MTD=y
-CONFIG_AMAZON_NET_SW=y
-CONFIG_AMAZON_PCI=y
-CONFIG_AMAZON_WDT=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_OVERRIDE=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_KALLSYMS=y
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
-# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
-# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
-CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
-# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/amazon/files/arch/mips/amazon/Kconfig b/target/linux/amazon/files/arch/mips/amazon/Kconfig
deleted file mode 100644 (file)
index 63055fc..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-# copyright 2007 john crispin <blogic@openwrt.org>
-
-menu "Amazon built-in"
-
-config AMAZON_ASC_UART
-       bool "Amazon asc uart"
-       select SERIAL_CORE
-       select SERIAL_CORE_CONSOLE
-       default y
-
-config AMAZON_PCI
-       bool "Amazon PCI support"
-       default y
-       select HW_HAS_PCI
-       select PCI
-
-config AMAZON_NET_SW
-       bool "Amazon network"
-       default y
-
-config AMAZON_WDT
-       bool "Amazon watchdog timer"
-       default y
-
-config AMAZON_MTD
-       bool "Amazon MTD map"
-       default y
-
-config ADM6996_SUPPORT
-       bool "Amazon ADM6996 Switch driver"
-       default y
-
-choice 
-       prompt "Flash Size"
-       depends on AMAZON_MTD
-
-config MTD_AMAZON_FLASH_SIZE_2
-       bool "2MB"
-
-config MTD_AMAZON_FLASH_SIZE_4
-       bool "4MB"
-
-config MTD_AMAZON_FLASH_SIZE_8
-       bool "8MB"
-
-config MTD_AMAZON_FLASH_SIZE_16
-       bool "16MB"
-
-endchoice
-
-choice 
-       prompt "Bus Width"
-       depends on AMAZON_MTD
-
-config MTD_AMAZON_BUS_WIDTH_8
-       bool "8-bit"
-
-config MTD_AMAZON_BUS_WIDTH_16
-       bool "16-bit"
-
-config MTD_AMAZON_BUS_WIDTH_32
-       bool "32-bit"
-
-endchoice
-
-
-endmenu
diff --git a/target/linux/amazon/files/arch/mips/amazon/Makefile b/target/linux/amazon/files/arch/mips/amazon/Makefile
deleted file mode 100644 (file)
index 47761a2..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-#  Copyright 2007 openwrt.org
-#       John Crispin <blogic@openwrt.org>
-#
-# Makefile for Infineon Amazon
-#
-obj-y := dma-core.o interrupt.o prom.o setup.o board.o
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/target/linux/amazon/files/arch/mips/amazon/board.c b/target/linux/amazon/files/arch/mips/amazon/board.c
deleted file mode 100644 (file)
index 330cec6..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2009 Hauke Mehrtens <hauke@hauke-m.de>
- */
-
-
-#include <linux/platform_device.h>
-#include <asm/amazon/irq.h>
-
-#define AMAZON_FLASH_START 0x13000000
-#define AMAZON_FLASH_MAX 0x1000000
-
-static struct platform_device amazon_mii = {
-       .id = 0,
-       .name = "amazon_mii0",
-//     .dev = {
-//             .platform_data = amazon_ethaddr,
-//     }
-};
-
-static struct platform_device amazon_wdt = {
-       .id = 0,
-       .name = "amazon_wdt",
-};
-
-static struct platform_device amazon_asc = {
-       .id = 0,
-       .name = "amazon_asc",
-};
-
-static struct resource amazon_mtd_resource = {
-       .start  = AMAZON_FLASH_START,
-       .end    = AMAZON_FLASH_START + AMAZON_FLASH_MAX - 1,
-       .flags  = IORESOURCE_MEM,
-};
-
-static struct platform_device amazon_mtd = {
-       .id = 0,
-       .name = "amazon_mtd",
-       .num_resources  = 1,
-       .resource   = &amazon_mtd_resource,
-};
-
-
-struct platform_device *amazon_devs[] = {
-       &amazon_mii, &amazon_mtd, &amazon_wdt, &amazon_asc
-};
-
-
-int __init amazon_init_devices(void)
-{
-       printk(KERN_INFO "");
-       return platform_add_devices(amazon_devs, 4);
-}
-
-arch_initcall(amazon_init_devices);
diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.c b/target/linux/amazon/files/arch/mips/amazon/dma-core.c
deleted file mode 100644 (file)
index 8cb4085..0000000
+++ /dev/null
@@ -1,1462 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- */
-//-----------------------------------------------------------------------
-/*
- * Description:
- *     Driver for Infineon Amazon DMA
- */
-//-----------------------------------------------------------------------
-/* Author:     Wu Qi Ming[Qi-Ming.Wu@infineon.com]
- * Created:    7-April-2004
- */
-//-----------------------------------------------------------------------
-/* History
- * Last changed on: 4-May-2004
- * Last changed by: <peng.liu@infineon.com>
- * Reason: debug
- */
-//----------------------------------------------------------------------- 
-/* Last changed on: 03-Dec-2004
- * Last changed by: peng.liu@infineon.com
- * Reason: recover from TPE bug 
- */
-
-//000004:fchang 2005/6/2 Modified by Linpeng as described below
-//----------------------------------------------------------------------- 
-/* Last changed on: 28-Jan-2004
- * Last changed by: peng.liu@infineon.com
- * Reason: 
- * - handle "out of memory" bug
- */
-//000003:tc.chen 2005/06/16 fix memory leak when Tx buffer full (heaving traffic).
-//507261:tc.chen 2005/07/26 re-organize code address map to improve performance.
-
-#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-#define MODVERSIONS
-#endif
-
-#if defined(MODVERSIONS) && !defined(__GENKSYMS__)
-#include <linux/modversions.h>
-#endif
-
-#ifndef EXPORT_SYMTAB
-#define EXPORT_SYMTAB                  /* need this one 'cause we export symbols */
-#endif
-
-#undef DMA_NO_POLLING
-
-/* no TX interrupt handling */
-#define NO_TX_INT
-/* need for DMA workaround */
-#undef AMAZON_DMA_TPE_AAL5_RECOVERY
-
-#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
-#define MAX_SYNC_FAILS 1000000 // 000004:fchang
-unsigned int dma_sync_fails = 0;
-unsigned int total_dma_tpe_reset = 0;
-int (*tpe_reset) (void);
-int (*tpe_start) (void);
-int (*tpe_inject) (void);
-#endif                                                 // AMAZON_DMA_TPE_AAL5_RECOVERY
-
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/selection.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/amazon_dma.h>
-#include "dma-core.h"
-
-#define AMAZON_DMA_EMSG(fmt, args...) printk( KERN_ERR  "%s: " fmt,__FUNCTION__, ## args)
-
-static irqreturn_t dma_interrupt(int irq, void *dev_id);
-extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
-
-/***************************************** global data *******************************************/
-u64 *g_desc_list;
-dev_list *g_current_dev = NULL;
-dev_list *g_head_dev = NULL;
-dev_list *g_tail_dev = NULL;
-channel_info g_log_chan[CHAN_TOTAL_NUM + 1];
-struct proc_dir_entry *g_amazon_dma_dir;
-static u8 rx_chan_list_len = 0;
-static u8 tx_chan_list_len = 0;
-static int rx_chan_list[RX_CHAN_NUM + 1];
-static int tx_chan_list[TX_CHAN_NUM + 1];
-static u32 comb_isr_mask[CHAN_TOTAL_NUM];
-
-static inline int is_rx_chan(int chan_no)
-/*judge if this is an rx channel*/
-{
-       int result = 0;
-       if (chan_no < RX_CHAN_NUM)
-               result = 1;
-       return result;
-}
-
-/* Ugly, Channel ON register is badly mapped to channel no. */
-static u8 ch_on_mapping[CHAN_TOTAL_NUM] =
-       { 0, 1, 2, 3, 6, 7, 10, 4, 5, 8, 9, 11 };
-
-/* Brief:      check wether the chan_no is legal
- * Parameter:          chan_no: logical channel number
- * Return:     0 if is not valid
- *             1 if is valid
- */
-static inline int is_valid_dma_ch(int chan_no)
-{
-       return ((chan_no >= 0) && (chan_no < CHAN_TOTAL_NUM));
-}
-
-/* Brief:      check whether a channel is open through Channel ON register
- * Parameter:  chan_no: logical channel number
- * Return:     1 channel is open
- *             0 not yet
- *             EINVAL: invalid parameter
- */
-static inline int is_channel_open(int chan_no)
-{
-       return (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &
-                       (1 << ch_on_mapping[chan_no]));
-}
-
-/* Brief: add a list entry
- * Description: 
- *     always add to the tail and no redundancy allowed. (i.e. entries are unique)
- *     0       : entry deleted
- *     <0      : not deleted (due to not unique)
- */
-static inline int _add_list_entry(int *list, int size_of_list, int entry)
-{
-       int i;
-       for (i = 0; i < size_of_list; i++) {
-               if (list[i] == entry)
-                       break;
-               if (list[i] < 0) {
-                       list[i] = entry;
-                       return 0;
-               }
-       }
-       return -1;
-}
-
-/* Brief: delete a list entry
- * Description:
- *     find the entry and remove it. shift all entries behind it one step forward if necessary\
- * Return:
- *     0       : entry deleted
- *     <0      : not deleted (due to not found?)
- */
-static inline int _delete_list_entry(int *list, int size_of_list,
-                                                                        int entry)
-{
-       int i, j;
-       for (i = 0; i < size_of_list; i++) {
-               if (list[i] == entry) {
-                       for (j = i; j < size_of_list; j++) {
-                               list[j] = list[j + 1];
-                               if (list[j + 1] < 0) {
-                                       break;
-                               }
-                       }
-                       return 0;
-               }
-       }
-       return -1;
-}
-
-/* Brief:      enable a channel through Channel ON register
- * Parameter:  chan_no: logical channel number
- * Description:        
- *     Please don't open a channel without a valid descriptor (hardware pitfall)
- */
-static inline void open_channel(int chan_no)
-{
-       AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]);
-       if (is_rx_chan(chan_no)) {
-               if (_add_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) {
-                       rx_chan_list_len++;
-               } else {
-                       AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no);
-               }
-       } else {
-               if (_add_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) {
-                       tx_chan_list_len++;
-               } else {
-                       AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no);
-               }
-       }
-}
-
-/* Brief:      disable a channel through Channel ON register
- * Parameter:  chan_no: logical channel number
- */
-
-static inline void close_channel(int chan_no)
-{
-       AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]);
-       if (is_rx_chan(chan_no)) {
-               if (_delete_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) {
-                       rx_chan_list_len--;
-               } else {
-                       AMAZON_DMA_DMSG("cannot remove chan %d from open list \n",
-                                                       chan_no);
-               }
-       } else {
-               if (_delete_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) {
-                       tx_chan_list_len--;
-               } else {
-                       AMAZON_DMA_DMSG("cannot remove chan %d from open list \n",
-                                                       chan_no);
-               }
-       }
-}
-
-/* Brief: clear RX interrupt
- */
-inline void rx_chan_clear_isr(int chan_no)
-{
-#ifdef DMA_NO_POLLING
-       AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
-               (AMAZON_DMA_REG32
-                (AMAZON_DMA_CH0_ISR +
-                 chan_no *
-                 AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | DMA_ISR_CMDCPT
-                                                                | DMA_ISR_DURR));
-#else
-       AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
-               (AMAZON_DMA_REG32
-                (AMAZON_DMA_CH0_ISR +
-                 chan_no *
-                 AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP |
-                                                                DMA_ISR_CMDCPT));
-#endif
-}
-
-#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
-/* Brief:      hacking function, this will reset all descriptors back to DMA
- */
-static void dma_reset_all_descriptors(int chan_no)
-{
-       volatile struct rx_desc *rx_desc_p = NULL;
-       int i;
-       rx_desc_p =
-               (struct rx_desc *) g_desc_list +
-               g_log_chan[chan_no].offset_from_base;
-       for (i = 0; i < g_log_chan[chan_no].desc_len; i++) {
-               rx_desc_p->status.word &=
-                       (~(DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | DMA_DESC_CPT_SET));
-               rx_desc_p->status.word |=
-                       (DMA_DESC_OWN_DMA | g_log_chan[chan_no].packet_size);
-               rx_desc_p++;
-       }
-}
-
-/* Brief:      Reset DMA descriptors 
- */
-static void amazon_dma_reset_tpe_rx(int chan_no)
-{
-       struct tx_desc *tx_desc_p = NULL;
-       int j, i = 0;
-
-       // wait until all TX channels stop transmitting
-       for (j = 9; j <= 10; j++) {
-               tx_desc_p =
-                       (struct tx_desc *) g_desc_list +
-                       g_log_chan[j].offset_from_base;
-               for (i = 0; i < g_log_chan[j].desc_len; i++) {
-                       while ((tx_desc_p->status.field.OWN != CPU_OWN)) {
-                               AMAZON_DMA_DMSG("DMA TX in progress\n");        // 000004:fchang
-                               udelay(100);
-                       }
-                       tx_desc_p++;
-               }
-       }
-
-       if (tpe_reset) {
-               total_dma_tpe_reset++;
-               AMAZON_DMA_DMSG
-                       ("\n===============resetting TPE========================== \n");
-               if ((*tpe_reset) ()) {
-                       panic("cannot reset TPE engien\n");     // 000004:fchang
-               }
-       } else {
-               panic("no tpe_reset function\n");       // 000004:fchang
-               return;
-       }
-       dma_reset_all_descriptors(chan_no);
-       rx_chan_clear_isr(chan_no);
-       mb();
-
-       // send EoP
-       if (tpe_inject) {
-               if ((*tpe_inject) ()) {
-                       panic("cannot inject a cell\n");        // 000004:fchang
-               }
-       } else {
-               AMAZON_DMA_EMSG("no tpe_inject function\n");
-               return;
-       }
-       mb();
-       while (1) {
-               if (AMAZON_DMA_REG32
-                       (AMAZON_DMA_CH0_ISR +
-                        chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT)) {
-                       rx_chan_clear_isr(chan_no);
-                       mb();
-                       dma_reset_all_descriptors(chan_no);
-                       if (g_log_chan[chan_no].current_desc ==
-                               (g_log_chan[chan_no].desc_len - 1)) {
-                               g_log_chan[chan_no].current_desc = 0;
-                       } else {
-                               g_log_chan[chan_no].current_desc++;
-                       }
-                       break;
-               }
-               mdelay(1);
-       }
-       mb();
-#if 0
-       AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]);
-       while (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &
-                  (1 << ch_on_mapping[chan_no])) {
-               printk("TPE channel still on\n");
-               mdelay(1);
-       }
-
-       // AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = (1<<chan_no);
-       mb();
-       AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + chan_no * AMAZON_DMA_CH_STEP) =
-               0x32;
-       mb();
-       rx_chan_clear_isr(chan_no);
-       dma_reset_all_descriptors(chan_no);
-       mb();
-       AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]);
-       // g_log_chan[chan_no].current_desc=0;
-       mb();
-       mdelay(1);
-#endif
-       if (tpe_start) {
-               (*tpe_start) ();
-       } else {
-               AMAZON_DMA_EMSG("cannot restart TPE engien\n");
-       }
-}
-#endif                                                 // AMAZON_DMA_TPE_AAL5_RECOVERY
-
-
-/* Brief:      RX channel interrupt handler 
- * Parameter:  RX channel no
- * Description: the interrupt handler for each RX channel
- *             1. check descriptor, clear ISR if no incoming packet
- *             2. inform upper layer to receive packet (and update descriptors)
- */
-inline void rx_chan_intr_handler(int chan_no)
-{
-       volatile struct rx_desc *rx_desc_p = NULL;
-
-       /* fetch the current descriptor */
-       rx_desc_p =
-               (struct rx_desc *) g_desc_list +
-               g_log_chan[chan_no].offset_from_base +
-               g_log_chan[chan_no].current_desc;
-
-       g_log_chan[chan_no].dma_dev->current_rx_chan =
-               chan_no - g_log_chan[chan_no].dma_dev->logic_rx_chan_base;
-
-       // workaround for DMA pitfall: complete bit set happends before the
-       // other two bits (own,eop) are ready
-       if ((rx_desc_p->status.field.EoP != 1)
-               || (rx_desc_p->status.field.OWN != CPU_OWN)
-               || (rx_desc_p->status.field.data_length ==
-                       g_log_chan[chan_no].packet_size)) {
-#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
-               if (chan_no == 4 || chan_no == 5) {
-                       dma_sync_fails++;
-                       if (dma_sync_fails > MAX_SYNC_FAILS) {
-                               // detect bug
-                               rx_desc_p0 =
-                                       (struct rx_desc *) g_desc_list +
-                                       g_log_chan[chan_no].offset_from_base;
-                               rx_desc_p1 =
-                                       (struct rx_desc *) g_desc_list +
-                                       g_log_chan[chan_no].offset_from_base + 1;
-                               if ((rx_desc_p0->status.field.OWN == CPU_OWN
-                                        && rx_desc_p0->status.field.EoP != 1)
-                                       && (rx_desc_p1->status.field.OWN == CPU_OWN
-                                               && rx_desc_p1->status.field.EoP != 1)) {
-                                       amazon_dma_reset_tpe_rx(chan_no);
-                                       dma_sync_fails = 0;
-                                       return;
-                               }
-                               dma_sync_fails = 0;
-                               AMAZON_DMA_DMSG("too many times ch:%d\n", chan_no);     // 000004:fchang
-                               return;
-                       }
-                       udelay(10);                     // 000004:fchang
-               }
-#endif                                                 // //AMAZON_DMA_TPE_AAL5_RECOVERY
-               return;
-       }
-
-       /* inform the upper layer to receive the packet */
-       g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, RCV_INT);
-       /* check the next descriptor, if still contains the incoming packet,
-          then do not clear the interrupt status */
-       rx_desc_p =
-               (struct rx_desc *) g_desc_list +
-               g_log_chan[chan_no].offset_from_base +
-               g_log_chan[chan_no].current_desc;
-       if (!
-               ((rx_desc_p->status.field.OWN == CPU_OWN)
-                && (rx_desc_p->status.field.C == 1))) {
-               rx_chan_clear_isr(chan_no);
-       }
-}
-
-
-/* Brief:      TX channel interrupt handler 
- * Parameter:  TX channel no
- * Description: the interrupt handler for each TX channel
- * 1. check all the descripters,if any of them had transmitted a packet, then free buffer
- * because we cannot garantee the which one has already transmitted out, we have to go through all the descriptors here
- * 2. clear the interrupt status bit
- */
-inline void tx_chan_intr_handler(int chan_no)
-{
-       struct tx_desc *tx_desc_p = NULL;
-       int i = 0;
-
-       tx_desc_p =
-               (struct tx_desc *) g_desc_list +
-               g_log_chan[chan_no].offset_from_base;
-
-       for (i = 0; i < g_log_chan[chan_no].desc_len; i++) {
-               if ((tx_desc_p->status.field.OWN == CPU_OWN)
-                       && (tx_desc_p->status.field.C == 1)) {
-                       /* if already transmitted, then free the buffer */
-                       g_log_chan[chan_no].
-                               buffer_free((u8 *) __va(tx_desc_p->Data_Pointer),
-                                                       g_log_chan[chan_no].opt[i]);
-                       tx_desc_p->status.field.C = 0;
-                       /* inform the upper layer about the completion of the
-                          transmitted packet, the upper layer may want to free the
-                          packet */
-                       g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev,
-                                                                                        TRANSMIT_CPT_INT);
-               }
-               tx_desc_p++;
-       }
-
-       /* after all these operations, clear the interrupt status bit */
-       AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
-               (AMAZON_DMA_REG32
-                (AMAZON_DMA_CH0_ISR +
-                 chan_no *
-                 AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP |
-                                                                DMA_ISR_CMDCPT));
-}
-
-/*     Brief:  DMA interrupt handler
- */
-static irqreturn_t dma_interrupt(int irq, void *dev_id)
-{
-       int i = 0;
-       int chan_no;
-       u32 isr = 0;
-#ifdef NO_TX_INT                               // 000004:fchang
-       static int cnt = 0;                     // 000004:fchang
-#endif                                                 // 000004:fchang
-       while ((isr =
-                       AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)) & (COMB_ISR_RX_MASK |
-                                                                                                         COMB_ISR_TX_MASK)) {
-               if (isr & COMB_ISR_RX_MASK) {
-                       // RX Channels: start WFQ algorithm
-                       chan_no = CHAN_TOTAL_NUM;
-                       for (i = 0; i < RX_CHAN_NUM; i++) {
-                               if ((isr & (comb_isr_mask[i]))
-                                       && (g_log_chan[i].weight > 0)) {
-                                       if (g_log_chan[chan_no].weight < g_log_chan[i].weight) {
-                                               chan_no = i;
-                                       }
-                               }
-                       }
-                       if (chan_no < CHAN_TOTAL_NUM) {
-                               rx_chan_intr_handler(chan_no);
-                       } else {
-                               for (i = 0; i < RX_CHAN_NUM; i++) {
-                                       g_log_chan[i].weight = g_log_chan[i].default_weight;
-                               }
-                       }
-               }
-#ifdef NO_TX_INT
-               cnt++;
-               if (cnt == 10) {
-                       cnt = 0;
-                       for (i = 0; i < tx_chan_list_len; i++) {
-                               if (AMAZON_DMA_REG32
-                                       (AMAZON_DMA_CH0_ISR +
-                                        tx_chan_list[i] *
-                                        AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP)) {
-                                       tx_chan_intr_handler(tx_chan_list[i]);
-                               }
-                       }
-               }
-#else
-               if (isr & COMB_ISR_TX_MASK) {
-                       // TX channels: RR
-                       for (i = 0; i < tx_chan_list_len; i++) {
-                               if (isr & (comb_isr_mask[tx_chan_list[i]])) {
-                                       tx_chan_intr_handler(tx_chan_list[i]);
-                               }
-                       }
-               }
-#endif
-       }                                                       // while 
-       return IRQ_HANDLED;
-}
-
-
-/*     Brief:  read a packet from DMA RX channel
- *     Parameter:
- *     Return: packet length
- *     Description:
- *             This is called back in a context of DMA interrupt
- *             1. prepare new descriptor
- *             2. read data
- *             3. update WFQ weight
- */
-//507261:tc.chen int dma_device_read(struct dma_device_info* dma_dev, u8** dataptr, void** opt)
-int asmlinkage dma_device_read(struct dma_device_info *dma_dev,
-                                                          u8 ** dataptr, void **opt)
-{
-       u8 *buf;
-       int len;
-       int chan_no = 0;
-       int byte_offset = 0;
-
-       struct rx_desc *rx_desc_p;
-       void *p = NULL;
-       int current_desc;
-
-       chan_no = dma_dev->logic_rx_chan_base + dma_dev->current_rx_chan;
-       current_desc = g_log_chan[chan_no].current_desc;
-       rx_desc_p =
-               (struct rx_desc *) (g_desc_list +
-                                                       g_log_chan[chan_no].offset_from_base +
-                                                       current_desc);
-       buf = (u8 *) __va(rx_desc_p->Data_Pointer);     /* extract the virtual
-                                                                                                  address of the data
-                                                                                                  pointer */
-       len = rx_desc_p->status.field.data_length;      /* extract the data length */
-#ifndef        CONFIG_MIPS_UNCACHED
-       dma_cache_inv((unsigned long) buf, len);
-#endif                                                 // CONFIG_MIPS_UNCACHED
-       *(u32 *) dataptr = (u32) buf;
-       if (opt) {
-               *(int *) opt = (int) g_log_chan[chan_no].opt[current_desc];     /* read 
-                                                                                                                                          out 
-                                                                                                                                          the 
-                                                                                                                                          opt 
-                                                                                                                                          information */
-       }
-
-       buf =
-               (u8 *) g_log_chan[chan_no].buffer_alloc(g_log_chan[chan_no].
-                                                                                               packet_size, &byte_offset,
-                                                                                               &p);
-       // should check null!!!!
-       if (buf == NULL || p == NULL) {
-               *(u32 *) dataptr = 0;
-               *(int *) opt = 0;
-               len = 0;
-       } else {
-               g_log_chan[chan_no].opt[current_desc] = p;
-               /* reduce the weight for WFQ algorithm */
-               g_log_chan[chan_no].weight -= len;
-               rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buf);
-       }
-       if (current_desc == g_log_chan[chan_no].desc_len - 1) {
-               current_desc = 0;
-       } else {
-               current_desc++;
-       }
-       g_log_chan[chan_no].current_desc = current_desc;
-
-       rx_desc_p->status.word = DMA_DESC_OWN_DMA
-               | (byte_offset << DMA_DESC_BYTEOFF_SHIFT)
-               | g_log_chan[chan_no].packet_size;
-       return len;
-}
-
-/*     Brief:  write a packet through DMA RX channel to peripheral
- *     Parameter:
- *     Return: packet length
- *     Description:
- *
- */
-u64 dma_tx_drop = 0;
-//507261:tc.chen int dma_device_write(struct dma_device_info* dma_dev, u8* dataptr, int len,void* opt)
-int asmlinkage dma_device_write(struct dma_device_info *dma_dev,
-                                                               u8 * dataptr, int len, void *opt)
-{
-       int chan_no = 0;
-       struct tx_desc *tx_desc_p;
-
-       int byte_offset = 0;
-       int current_desc;
-       static int cnt = 0;                     // 000004:fchang
-
-       unsigned long flag;
-       local_irq_save(flag);
-
-       chan_no = dma_dev->logic_tx_chan_base + dma_dev->current_tx_chan;
-       current_desc = g_log_chan[chan_no].current_desc;
-       tx_desc_p =
-               (struct tx_desc *) (g_desc_list +
-                                                       g_log_chan[chan_no].offset_from_base +
-                                                       current_desc);
-       // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){
-       if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen
-               AMAZON_DMA_DMSG("no TX desc for CPU, drop packet\n");
-               dma_tx_drop++;
-               g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT);
-               local_irq_restore(flag);
-               return 0;
-       }
-       g_log_chan[chan_no].opt[current_desc] = opt;
-
-       /* byte offset----to adjust the starting address of the data buffer,
-          should be multiple of the burst length. */
-       byte_offset =
-               ((u32) CPHYSADDR((u32) dataptr)) % (g_log_chan[chan_no].burst_len *
-                                                                                       4);
-#ifndef        CONFIG_MIPS_UNCACHED
-       dma_cache_wback((unsigned long) dataptr, len);
-       wmb();
-#endif                                                 // CONFIG_MIPS_UNCACHED
-
-       tx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) dataptr) - byte_offset;
-       wmb();
-       tx_desc_p->status.word = DMA_DESC_OWN_DMA
-               | DMA_DESC_SOP_SET
-               | DMA_DESC_EOP_SET | (byte_offset << DMA_DESC_BYTEOFF_SHIFT)
-               | len;
-       wmb();
-       if (is_channel_open(chan_no) == 0) {
-               // turn on if necessary
-               open_channel(chan_no);
-       }
-#ifdef DMA_NO_POLLING
-       if ((AMAZON_DMA_REG32
-                (AMAZON_DMA_CH0_ISR +
-                 chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_DURR | DMA_ISR_CPT)) ==
-               (DMA_ISR_DURR)) {
-               // clear DURR if (CPT is AND set and DURR is set)
-               AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR +
-                                                chan_no * AMAZON_DMA_CH_STEP) = DMA_ISR_DURR;
-       }
-#endif
-
-       if (current_desc == (g_log_chan[chan_no].desc_len - 1)) {
-               current_desc = 0;
-       } else {
-               current_desc++;
-       }
-
-
-       g_log_chan[chan_no].current_desc = current_desc;
-       tx_desc_p =
-               (struct tx_desc *) (g_desc_list +
-                                                       g_log_chan[chan_no].offset_from_base +
-                                                       current_desc);
-       // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){
-       if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen
-               g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT);
-       }
-#ifdef NO_TX_INT
-//000004:fchang Start
-       cnt++;
-       if (cnt == 5) {
-               cnt = 0;
-               tx_chan_intr_handler(chan_no);
-       }
-//000004:fchang End
-#endif
-       local_irq_restore(flag);        // 000004:fchang
-       return len;
-}
-
-
-
-int desc_list_proc_read(char *buf, char **start, off_t offset,
-                                               int count, int *eof, void *data)
-{
-       int i;
-       u32 *p = (u32 *) g_desc_list;
-       int len = 0;
-       len += sprintf(buf + len, "descriptor list:\n");
-       for (i = 0; i < 120; i++) {
-               len += sprintf(buf + len, "%d\n", i);
-               len += sprintf(buf + len, "%08x\n", *(p + i * 2 + 1));
-               len += sprintf(buf + len, "%08x\n", *(p + i * 2));
-
-       }
-
-       return len;
-
-}
-
-int channel_weight_proc_read(char *buf, char **start, off_t offset,
-                                                        int count, int *eof, void *data)
-{
-
-       // int i=0;
-       int len = 0;
-       len += sprintf(buf + len, "Qos dma channel weight list\n");
-       len +=
-               sprintf(buf + len,
-                               "channel_num default_weight current_weight device Tx/Rx\n");
-       len +=
-               sprintf(buf + len,
-                               "     0      %08x        %08x      Switch   Rx0\n",
-                               g_log_chan[0].default_weight, g_log_chan[0].weight);
-       len +=
-               sprintf(buf + len,
-                               "     1      %08x        %08x      Switch   Rx1\n",
-                               g_log_chan[1].default_weight, g_log_chan[1].weight);
-       len +=
-               sprintf(buf + len,
-                               "     2      %08x        %08x      Switch   Rx2\n",
-                               g_log_chan[2].default_weight, g_log_chan[2].weight);
-       len +=
-               sprintf(buf + len,
-                               "     3      %08x        %08x      Switch   Rx3\n",
-                               g_log_chan[3].default_weight, g_log_chan[3].weight);
-       len +=
-               sprintf(buf + len,
-                               "     4      %08x        %08x      Switch   Tx0\n",
-                               g_log_chan[4].default_weight, g_log_chan[4].weight);
-       len +=
-               sprintf(buf + len,
-                               "     5      %08x        %08x      Switch   Tx1\n",
-                               g_log_chan[5].default_weight, g_log_chan[5].weight);
-       /* 
-          len+=sprintf(buf+len," 6 %08x %08x TPE
-          Rx0\n",g_log_chan[6].default_weight, g_log_chan[6].weight);
-          len+=sprintf(buf+len," 7 %08x %08x TPE
-          Rx0\n",g_log_chan[7].default_weight, g_log_chan[7].weight);
-          len+=sprintf(buf+len," 8 %08x %08x TPE
-          Tx0\n",g_log_chan[8].default_weight, g_log_chan[8].weight);
-          len+=sprintf(buf+len," 9 %08x %08x TPE
-          Rx0\n",g_log_chan[9].default_weight, g_log_chan[9].weight);
-          len+=sprintf(buf+len," 10 %08x %08x DPLUS
-          Rx0\n",g_log_chan[10].default_weight, g_log_chan[10].weight);
-          len+=sprintf(buf+len," 11 %08x %08x DPLUS
-          Rx0\n",g_log_chan[11].default_weight, g_log_chan[11].weight); */
-       return len;
-}
-
-int dma_register_proc_read(char *buf, char **start, off_t offset,
-                                                  int count, int *eof, void *data)
-{
-       dev_list *temp_dev;
-       int len = 0;;
-
-       len += sprintf(buf + len, "amazon dma driver\n");
-       len += sprintf(buf + len, "version 1.0\n");
-       len += sprintf(buf + len, "devices registered:\n");
-       for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
-               len += sprintf(buf + len, "%s ", temp_dev->dev->device_name);
-       }
-       len += sprintf(buf + len, "\n");
-       len += sprintf(buf + len, "CH_ON=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_ON));
-       len += sprintf(buf + len, "CH_RST=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_RST));
-       len += sprintf(buf + len, "CH0_ISR=%08x\n",     AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR));
-       len += sprintf(buf + len, "CH1_ISR=%08x\n",     AMAZON_DMA_REG32(AMAZON_DMA_CH1_ISR));
-       len += sprintf(buf + len, "CH2_ISR=%08x\n",     AMAZON_DMA_REG32(AMAZON_DMA_CH2_ISR));
-       len += sprintf(buf + len, "CH3_ISR=%08x\n",     AMAZON_DMA_REG32(AMAZON_DMA_CH3_ISR));
-       len += sprintf(buf + len, "CH4_ISR=%08x\n",     AMAZON_DMA_REG32(AMAZON_DMA_CH4_ISR));
-       len += sprintf(buf + len, "CH5_ISR=%08x\n",     AMAZON_DMA_REG32(AMAZON_DMA_CH5_ISR));
-       len += sprintf(buf + len, "CH6_ISR=%08x\n",     AMAZON_DMA_REG32(AMAZON_DMA_CH6_ISR));
-       len += sprintf(buf + len, "CH7_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH7_ISR));
-       len +=          sprintf(buf + len, "CH8_ISR=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH8_ISR));
-       len +=
-               sprintf(buf + len, "CH9_ISR=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH9_ISR));
-       len +=
-               sprintf(buf + len, "CH10_ISR=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH10_ISR));
-       len +=
-               sprintf(buf + len, "CH11_ISR=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH11_ISR));
-       len +=
-               sprintf(buf + len, "LCH0_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK));
-       len +=
-               sprintf(buf + len, "LCH1_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH1_MSK));
-       len +=
-               sprintf(buf + len, "LCH2_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH2_MSK));
-       len +=
-               sprintf(buf + len, "LCH3_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH3_MSK));
-       len +=
-               sprintf(buf + len, "LCH4_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH4_MSK));
-       len +=
-               sprintf(buf + len, "LCH5_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH5_MSK));
-       len +=
-               sprintf(buf + len, "LCH6_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH6_MSK));
-       len +=
-               sprintf(buf + len, "LCH7_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH7_MSK));
-       len +=
-               sprintf(buf + len, "LCH8_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH8_MSK));
-       len +=
-               sprintf(buf + len, "LCH9_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH9_MSK));
-       len +=
-               sprintf(buf + len, "LCH10_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH10_MSK));
-       len +=
-               sprintf(buf + len, "LCH11_MSK=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH11_MSK));
-       len +=
-               sprintf(buf + len, "Desc_BA=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA));
-       len +=
-               sprintf(buf + len, "LCH0_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH1_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH2_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH3_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH4_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH5_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH6_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH7_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH8_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH9_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH10_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH11_DES_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_LEN));
-       len +=
-               sprintf(buf + len, "LCH1_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH2_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH3_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH4_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH5_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH6_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH7_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH8_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH9_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH10_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_OFST));
-       len +=
-               sprintf(buf + len, "LCH11_DES_OFST=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_OFST));
-       len +=
-               sprintf(buf + len, "AMAZON_DMA_SW_BL=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_SW_BL));
-       len +=
-               sprintf(buf + len, "AMAZON_DMA_TPE_BL=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_TPE_BL));
-       len +=
-               sprintf(buf + len, "DPlus2FPI_BL=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_DPlus2FPI_BL));
-       len +=
-               sprintf(buf + len, "GRX_BUF_LEN=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN));
-       len +=
-               sprintf(buf + len, "DMA_ECON_REG=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG));
-       len +=
-               sprintf(buf + len, "POLLING_REG=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG));
-       len +=
-               sprintf(buf + len, "CH_WGT=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_CH_WGT));
-       len +=
-               sprintf(buf + len, "TX_WGT=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_TX_WGT));
-       len +=
-               sprintf(buf + len, "DPlus2FPI_CLASS=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_DPLus2FPI_CLASS));
-       len +=
-               sprintf(buf + len, "COMB_ISR=%08x\n",
-                               AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR));
-#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
-       len += sprintf(buf + len, "TPE fails:%u\n", total_dma_tpe_reset);       // 000004:fchang
-#endif
-       return len;
-}
-
-/*     Brief:  initialize DMA registers
- *     Description:
- */
-static void dma_chip_init(void)
-{
-       int i;
-       for (i = 0; i < CHAN_TOTAL_NUM; i++) {
-               AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST +
-                                                i * AMAZON_DMA_CH_STEP) = DEFAULT_OFFSET;
-       }
-#ifdef DMA_NO_POLLING
-       AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = 0;
-#else
-       // enable poll mode and set polling counter
-       AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = DMA_POLLING_CNT | DMA_POLLING_ENABLE;
-#endif
-       // to enable DMA drop
-       AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN) = 0x10000;
-}
-
-int insert_dev_list(dev_list * dev)
-{
-       dev_list *temp_dev;
-       if (g_head_dev == NULL) {
-               g_head_dev = dev;
-               g_tail_dev = dev;
-               dev->prev = NULL;
-               dev->next = NULL;
-       } else {
-               for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
-                       if (temp_dev->weight < dev->weight) {
-                               if (temp_dev->prev)
-                                       temp_dev->prev->next = dev;
-
-                               dev->prev = temp_dev->prev;
-                               dev->next = temp_dev;
-                               temp_dev->prev = dev;
-                               if (temp_dev == g_head_dev)
-                                       g_head_dev = dev;
-                               break;
-                       }
-               }
-
-               if (!temp_dev) {
-                       g_tail_dev->next = dev;
-                       dev->prev = g_tail_dev;
-                       dev->next = NULL;
-                       g_tail_dev = dev;
-               }
-
-       }
-
-       return 1;
-}
-
-u8 *common_buffer_alloc(int len, int *byte_offset, void **opt)
-{
-       u8 *buffer = (u8 *) kmalloc(len * sizeof(u8), GFP_KERNEL);
-       *byte_offset = 0;
-       return buffer;
-
-}
-
-int common_buffer_free(u8 * dataptr, void *opt)
-{
-       if (dataptr)
-               kfree(dataptr);
-       return 0;
-}
-
-
-int register_dev(struct dma_device_info *dma_dev)
-{
-       int i, j, temp;
-       int burst_reg = 0;
-       u8 *buffer;
-       void *p = NULL;
-       int byte_offset = 0;
-
-       struct rx_desc *rx_desc_p;
-       struct tx_desc *tx_desc_p;
-       if (strcmp(dma_dev->device_name, "switch1") == 0) {
-               AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH1_RST_MASK; // resest
-                                                                                                                               // channel 
-                                                                                                                               // 1st 
-               AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3;       // endian
-                                                                                                                       // conversion
-                                                                                                                       // for Switch
-               burst_reg = AMAZON_DMA_SW_BL;
-               dma_dev->logic_rx_chan_base = switch_rx_chan_base;
-               dma_dev->logic_tx_chan_base = switch_tx_chan_base;
-       }
-
-       else if (strcmp(dma_dev->device_name, "switch2") == 0) {
-               AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH2_RST_MASK; // resest
-                                                                                                                               // channel 
-                                                                                                                               // 1st
-               AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3;       // endian
-                                                                                                                       // conversion
-                                                                                                                       // for Switch
-               burst_reg = AMAZON_DMA_SW_BL;
-               dma_dev->logic_rx_chan_base = switch2_rx_chan_base;
-               dma_dev->logic_tx_chan_base = switch2_tx_chan_base;
-
-       } else if (strcmp(dma_dev->device_name, "TPE") == 0) {
-               AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = TPE_RST_MASK;     // resest
-                                                                                                                       // channel 1st 
-                                                                                                                       // 
-               burst_reg = AMAZON_DMA_TPE_BL;
-               dma_dev->logic_rx_chan_base = TPE_rx_chan_base;
-               dma_dev->logic_tx_chan_base = TPE_tx_chan_base;
-       }
-
-       else if (strcmp(dma_dev->device_name, "DPlus") == 0) {
-               AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = DPlus2FPI_RST_MASK;       // resest 
-                                                                                                                                       // channel 
-                                                                                                                                       // 1st
-               dma_dev->logic_rx_chan_base = DPLus2FPI_rx_chan_base;
-               dma_dev->logic_tx_chan_base = DPLus2FPI_tx_chan_base;
-
-       }
-
-       i = 0;
-       for (temp = dma_dev->tx_burst_len; temp > 2; temp /= 2) {
-               i += 1;
-       }
-
-
-       AMAZON_DMA_REG32(burst_reg) = i << 1;
-       i = 0;
-       for (temp = dma_dev->rx_burst_len; temp > 2; temp /= 2) {
-               i += 1;
-       }
-       AMAZON_DMA_REG32(burst_reg) += i;
-
-       for (i = 0; i < dma_dev->num_rx_chan; i++) {
-
-               temp = dma_dev->logic_rx_chan_base + i;
-               g_log_chan[temp].dma_dev = dma_dev;
-               g_log_chan[temp].weight = dma_dev->rx_chan[i].weight;
-               g_log_chan[temp].default_weight = dma_dev->rx_chan[i].weight;
-               g_log_chan[temp].current_desc = 0;
-               g_log_chan[temp].desc_ofst = DEFAULT_OFFSET;
-               g_log_chan[temp].desc_len = dma_dev->rx_chan[i].desc_num;
-               g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET;
-               g_log_chan[temp].packet_size = dma_dev->rx_chan[i].packet_size;
-
-               AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->rx_chan[i].desc_num;
-               // enable interrupt mask
-               if (temp == 4 || temp == 5) {
-                       AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x32;
-               } else {
-                       AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36;
-               }
-               strcpy(g_log_chan[temp].device_name, dma_dev->device_name);
-               g_log_chan[temp].burst_len = dma_dev->rx_burst_len;
-               g_log_chan[temp].control = dma_dev->rx_chan[i].control;
-
-
-               /* specify the buffer allocation and free method */
-               if (dma_dev->buffer_alloc)
-                       g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc;
-               else
-                       g_log_chan[temp].buffer_alloc = common_buffer_alloc;
-
-               if (dma_dev->buffer_free)
-                       g_log_chan[temp].buffer_free = dma_dev->buffer_free;
-               else
-                       g_log_chan[temp].buffer_free = common_buffer_free;
-
-               if (dma_dev->intr_handler)
-                       g_log_chan[temp].intr_handler = dma_dev->intr_handler;
-               else
-                       g_log_chan[temp].intr_handler = NULL;
-
-               for (j = 0; j < g_log_chan[temp].desc_len; j++) {
-                       rx_desc_p = (struct rx_desc *) (g_desc_list + g_log_chan[temp].offset_from_base + j);
-                       rx_desc_p->status.word = 0;
-                       rx_desc_p->status.field.data_length = g_log_chan[temp].packet_size;
-                       buffer = (u8 *) g_log_chan[temp].buffer_alloc(g_log_chan[temp].packet_size, &byte_offset, &p);
-                       rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buffer);
-                       rx_desc_p->status.field.byte_offset = byte_offset;
-                       /* fix me, should check if the addresss comply with the burst
-                          lenght requirment */
-                       g_log_chan[temp].opt[j] = p;
-                       rx_desc_p->status.field.OWN = DMA_OWN;
-
-               }
-               /* open or close the channel */
-               if (g_log_chan[temp].control)
-                       open_channel(temp);
-               else
-                       close_channel(temp);
-       }
-
-       for (i = 0; i < dma_dev->num_tx_chan; i++) {
-               temp = dma_dev->logic_tx_chan_base + i;
-               g_log_chan[temp].dma_dev = dma_dev;
-               g_log_chan[temp].weight = dma_dev->tx_chan[i].weight;
-               g_log_chan[temp].default_weight = dma_dev->tx_chan[i].weight;
-               g_log_chan[temp].current_desc = 0;
-               g_log_chan[temp].desc_ofst = DEFAULT_OFFSET;
-               g_log_chan[temp].desc_len = dma_dev->tx_chan[i].desc_num;
-               g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET;
-               g_log_chan[temp].packet_size = dma_dev->tx_chan[i].packet_size;
-
-               AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->tx_chan[i].desc_num;
-               // enable interrupt mask
-#ifdef NO_TX_INT
-               AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x3e;
-#else
-               AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36;
-#endif
-
-               strcpy(g_log_chan[temp].device_name, dma_dev->device_name);
-               g_log_chan[temp].burst_len = dma_dev->tx_burst_len;
-               g_log_chan[temp].control = dma_dev->tx_chan[i].control;
-
-               if (dma_dev->buffer_alloc)
-                       g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc;
-               else
-                       g_log_chan[temp].buffer_alloc = common_buffer_alloc;
-
-               if (dma_dev->buffer_free)
-                       g_log_chan[temp].buffer_free = dma_dev->buffer_free;
-               else
-                       g_log_chan[temp].buffer_free = common_buffer_free;
-
-               if (dma_dev->intr_handler)
-                       g_log_chan[temp].intr_handler = dma_dev->intr_handler;
-               else
-                       g_log_chan[temp].intr_handler = NULL;
-
-               for (j = 0; j < g_log_chan[temp].desc_len; j++) {
-
-                       tx_desc_p =
-                               (struct tx_desc *) (g_desc_list +
-                                                                       g_log_chan[temp].offset_from_base + j);
-                       tx_desc_p->status.word = 0;
-                       tx_desc_p->status.field.data_length =
-                               g_log_chan[temp].packet_size;
-                       tx_desc_p->status.field.OWN = CPU_OWN;
-
-               }
-               /* workaround DMA pitfall, we never turn on channel if we don't
-                  have proper descriptors */
-               if (!g_log_chan[temp].control) {
-                       close_channel(temp);
-               }
-
-       }
-
-       return 0;
-}
-
-int dma_device_register(struct dma_device_info *dma_dev)
-{
-       dev_list *temp_dev;
-       temp_dev = (dev_list *) kmalloc(sizeof(dev_list), GFP_KERNEL);
-       temp_dev->dev = dma_dev;
-       temp_dev->weight = dma_dev->weight;
-       insert_dev_list(temp_dev);
-       /* check whether this is a known device */
-       if ((strcmp(dma_dev->device_name, "switch1") == 0)
-               || (strcmp(dma_dev->device_name, "TPE") == 0)
-               || (strcmp(dma_dev->device_name, "switch2") == 0)
-               || (strcmp(dma_dev->device_name, "DPlus") == 0)) {
-               register_dev(dma_dev);
-       }
-
-       return 0;
-}
-
-
-int unregister_dev(struct dma_device_info *dma_dev)
-{
-       int i, j, temp;
-       u8 *buffer;
-       struct rx_desc *rx_desc_p;
-
-       for (i = 0; i < dma_dev->num_rx_chan; i++) {
-               temp = dma_dev->logic_rx_chan_base + i;
-               close_channel(temp);
-               for (j = 0; j < g_log_chan[temp].desc_len; j++) {
-                       rx_desc_p =
-                               (struct rx_desc *) (g_desc_list +
-                                                                       g_log_chan[temp].offset_from_base + j);
-                       buffer = (u8 *) __va(rx_desc_p->Data_Pointer);
-                       g_log_chan[temp].buffer_free(buffer, g_log_chan[temp].opt[j]);
-               }
-       }
-       for (i = 0; i < dma_dev->num_tx_chan; i++) {
-               temp = dma_dev->logic_tx_chan_base + i;
-               close_channel(temp);
-       }
-       return 0;
-}
-
-int dma_device_unregister(struct dma_device_info *dev)
-{
-       dev_list *temp_dev;
-       for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
-               if (strcmp(dev->device_name, temp_dev->dev->device_name) == 0) {
-                       if ((strcmp(dev->device_name, "switch1") == 0)
-                               || (strcmp(dev->device_name, "TPE") == 0)
-                               || (strcmp(dev->device_name, "switch2") == 0)
-                               || (strcmp(dev->device_name, "DPlus") == 0))
-                               unregister_dev(dev);
-                       if (temp_dev == g_head_dev) {
-                               g_head_dev = temp_dev->next;
-                               kfree(temp_dev);
-                       } else {
-                               if (temp_dev == g_tail_dev)
-                                       g_tail_dev = temp_dev->prev;
-                               if (temp_dev->prev)
-                                       temp_dev->prev->next = temp_dev->next;
-                               if (temp_dev->next)
-                                       temp_dev->next->prev = temp_dev->prev;
-                               kfree(temp_dev);
-                       }
-                       break;
-               }
-
-       }
-       return 0;
-}
-
-void dma_device_update_rx(struct dma_device_info *dma_dev)
-{
-       int i, temp;
-       for (i = 0; i < dma_dev->num_rx_chan; i++) {
-               temp = dma_dev->logic_rx_chan_base + i;
-               g_log_chan[temp].control = dma_dev->rx_chan[i].control;
-
-               if (g_log_chan[temp].control)
-                       open_channel(temp);
-               else
-                       close_channel(temp);
-       }
-
-}
-
-void dma_device_update_tx(struct dma_device_info *dma_dev)
-{
-       int i, temp;
-       for (i = 0; i < dma_dev->num_tx_chan; i++) {
-               temp = dma_dev->logic_tx_chan_base + i;
-               g_log_chan[temp].control = dma_dev->tx_chan[i].control;
-               if (g_log_chan[temp].control) {
-                       /* we turn on channel when send out the very first packet */
-                       // open_channel(temp);
-               } else
-                       close_channel(temp);
-       }
-}
-
-int dma_device_update(struct dma_device_info *dma_dev)
-{
-       dma_device_update_rx(dma_dev);
-       dma_device_update_tx(dma_dev);
-       return 0;
-}
-
-static int dma_open(struct inode *inode, struct file *file)
-{
-       return 0;
-}
-
-static int dma_release(struct inode *inode, struct file *file)
-{
-       /* release the resources */
-       return 0;
-}
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-static long dma_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-#else
-static int dma_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-#endif
-{
-       int value = 0;
-       int chan_no = 0;
-
-       switch (cmd) {
-       case 0:                                 /* get register value */
-               break;
-       case 1:                                 /* return channel weight */
-               chan_no = *((int *) arg);
-               *((int *) arg + 1) = g_log_chan[chan_no].default_weight;
-               break;
-       case 2:                                 /* set channel weight */
-               chan_no = *((int *) arg);
-               value = *((int *) arg + 1);
-               printk("new weight=%08x\n", value);
-               g_log_chan[chan_no].default_weight = value;
-               break;
-       default:
-               break;
-       }
-       return 0;
-}
-
-
-static struct file_operations dma_fops = {
-  owner:THIS_MODULE,
-  open:dma_open,
-  release:dma_release,
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-  unlocked_ioctl:dma_ioctl,
-#else
-  ioctl:dma_ioctl,
-#endif
-};
-
-static int dma_init(void)
-{
-       int result = 0;
-       int i;
-       printk("initialising dma core\n");
-       result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops);
-       if (result) {
-               AMAZON_DMA_EMSG("cannot register device dma-core!\n");
-               return result;
-       }
-       result = request_irq(AMAZON_DMA_INT, dma_interrupt, IRQF_DISABLED, "dma-core", (void *) &dma_interrupt);
-       if (result) {
-               AMAZON_DMA_EMSG("error, cannot get dma_irq!\n");
-               free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt);
-               return -EFAULT;
-       }
-
-       g_desc_list = (u64 *) KSEG1ADDR(__get_free_page(GFP_DMA));
-
-       if (g_desc_list == NULL) {
-               AMAZON_DMA_EMSG("no memory for desriptor\n");
-               return -ENOMEM;
-       }
-       memset(g_desc_list, 0, PAGE_SIZE);
-       AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA) = (u32) CPHYSADDR((u32) g_desc_list);
-       g_amazon_dma_dir = proc_mkdir("amazon_dma", NULL);
-       create_proc_read_entry("dma_register", 0, g_amazon_dma_dir, dma_register_proc_read, NULL);
-       create_proc_read_entry("g_desc_list", 0, g_amazon_dma_dir, desc_list_proc_read, NULL);
-       create_proc_read_entry("channel_weight", 0, g_amazon_dma_dir, channel_weight_proc_read, NULL);
-
-       dma_chip_init();
-       for (i = 0; i < (RX_CHAN_NUM + 1); i++) {
-               rx_chan_list[i] = -1;
-       }
-       for (i = 0; i < (TX_CHAN_NUM + 1); i++) {
-               tx_chan_list[i] = -1;
-       }
-
-       for (i = 0; i < CHAN_TOTAL_NUM; i++) {
-               comb_isr_mask[i] = 0x80000000 >> (i);
-       }
-
-       g_log_chan[CHAN_TOTAL_NUM].weight = 0;
-       printk("initialising dma core ... done\n");
-
-       return 0;
-}
-
-arch_initcall(dma_init);
-
-
-void dma_cleanup(void)
-{
-       dev_list *temp_dev;
-
-       unregister_chrdev(DMA_MAJOR, "dma-core");
-       for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
-               kfree(temp_dev);
-       }
-       free_page(KSEG0ADDR((unsigned long) g_desc_list));
-       remove_proc_entry("channel_weight", g_amazon_dma_dir);
-       remove_proc_entry("dma_list", g_amazon_dma_dir);
-       remove_proc_entry("dma_register", g_amazon_dma_dir);
-       remove_proc_entry("amazon_dma", NULL);
-       /* release the resources */
-       free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt);
-}
-
-EXPORT_SYMBOL(dma_device_register);
-EXPORT_SYMBOL(dma_device_unregister);
-EXPORT_SYMBOL(dma_device_read);
-EXPORT_SYMBOL(dma_device_write);
-EXPORT_SYMBOL(dma_device_update);
-EXPORT_SYMBOL(dma_device_update_rx);
-
-MODULE_LICENSE("GPL");
diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.h b/target/linux/amazon/files/arch/mips/amazon/dma-core.h
deleted file mode 100644 (file)
index cb3d456..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef DMA_CORE_H 
-#define DMA_CORE_H 
-
-#define AMAZON_DMA_REG32(reg_num)  *((volatile u32*)(reg_num))
-#define AMAZON_DMA_CH_STEP            4
-
-#define COMB_ISR_RX_MASK 0xfe000000
-#define COMB_ISR_TX_MASK 0x01f00000
-
-
-#define DMA_OWN   1
-#define CPU_OWN   0   
-#define DMA_MAJOR 250
-
-//Descriptors
-#define DMA_DESC_OWN_CPU               0x0
-#define DMA_DESC_OWN_DMA               0x80000000
-#define DMA_DESC_CPT_SET               0x40000000
-#define DMA_DESC_SOP_SET               0x20000000
-#define DMA_DESC_EOP_SET               0x10000000
-
-#define switch_rx_chan_base 0
-#define switch_tx_chan_base 7
-#define switch2_rx_chan_base 2
-#define switch2_tx_chan_base 8
-#define TPE_rx_chan_base    4
-#define TPE_tx_chan_base    9
-#define DPLus2FPI_rx_chan_base  6
-#define DPLus2FPI_tx_chan_base  11 
-
-#define RX_CHAN_NUM 7
-#define TX_CHAN_NUM 5
-#define CHAN_TOTAL_NUM       (RX_CHAN_NUM+TX_CHAN_NUM)
-#define DEFAULT_OFFSET 20
-#define DESCRIPTOR_SIZE 8
-
-typedef struct dev_list{
-   struct dma_device_info* dev;
-   int weight;
-   struct dev_list* prev;
-   struct dev_list* next;
-}dev_list; 
-
-typedef struct channel_info{
-   char device_name[16];
-   int occupied;
-   enum attr_t attr;  
-   int current_desc;
-   int weight;
-   int default_weight;
-   int desc_num;
-   int burst_len;
-   int desc_len;
-   int desc_ofst;
-   int packet_size;
-   int offset_from_base;
-   int control;
-   void* opt[DEFAULT_OFFSET];
-   u8* (*buffer_alloc)(int len,int* offset, void** opt);
-   int (*buffer_free)(u8* dataptr,void* opt);
-   int (*intr_handler)(struct dma_device_info* info,int status);
-
-   struct dma_device_info* dma_dev;
-}channel_info;
-
-
-
-#endif
-
diff --git a/target/linux/amazon/files/arch/mips/amazon/interrupt.c b/target/linux/amazon/files/arch/mips/amazon/interrupt.c
deleted file mode 100644 (file)
index 05ff1ee..0000000
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- *  Gary Jennejohn (C) 2003 <gj@denx.de>
- *  Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *  Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the 
- * AMAZON boards.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/bootinfo.h>
-#include <asm/irq_cpu.h>
-#include <asm/irq.h>
-#include <asm/time.h>
-
-static void amazon_disable_irq(struct irq_data *d)
-{
-       int i;
-       u32 amazon_ier = AMAZON_ICU_IM0_IER;
-       unsigned int irq_nr = d->irq;
-
-       if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0)
-               amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier);
-       else {
-               irq_nr -= INT_NUM_IRQ0;
-               for (i = 0; i <= 4; i++)
-               {
-                       if (irq_nr <= 31) 
-                       amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier);
-                       amazon_ier += 0x10;
-                       irq_nr -= 32;
-               }
-       }       
-}
-
-static void amazon_mask_and_ack_irq(struct irq_data *d)
-{
-       int i;
-       u32 amazon_ier = AMAZON_ICU_IM0_IER;
-       u32 amazon_isr = AMAZON_ICU_IM0_ISR;
-       unsigned int irq_nr = d->irq;
-
-       if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0){
-               amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier);
-               amazon_writel(AMAZON_DMA_H_MASK, amazon_isr); 
-       } else {
-               irq_nr -= INT_NUM_IRQ0;
-               for (i = 0; i <= 4; i++)
-               {
-                       if (irq_nr <= 31){ 
-                       amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier);
-                               amazon_writel((1 << irq_nr ), amazon_isr);
-                       }
-                       amazon_ier += 0x10;
-                       amazon_isr += 0x10;
-                       irq_nr -= 32;
-               }
-       }
-}
-
-static void amazon_enable_irq(struct irq_data *d)
-{
-       int i;
-       u32 amazon_ier = AMAZON_ICU_IM0_IER;
-       unsigned int irq_nr = d->irq;
-
-       if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0)
-               amazon_writel(amazon_readl(amazon_ier) | AMAZON_DMA_H_MASK, amazon_ier);
-       else {
-               irq_nr -= INT_NUM_IRQ0;
-               for (i = 0; i <= 4; i++)
-               {
-                       if (irq_nr <= 31)
-                               amazon_writel(amazon_readl(amazon_ier) | (1 << irq_nr ), amazon_ier);
-                       amazon_ier += 0x10;
-                       irq_nr -= 32;
-               }
-       }
-}
-
-static unsigned int amazon_startup_irq(struct irq_data *d)
-{
-       amazon_enable_irq(d);
-       return 0;
-}
-
-static struct irq_chip amazon_irq_type = {
-       .name = "AMAZON",
-       .irq_startup = amazon_startup_irq,
-       .irq_enable = amazon_enable_irq,
-       .irq_disable = amazon_disable_irq,
-       .irq_unmask = amazon_enable_irq,
-       .irq_ack = amazon_mask_and_ack_irq,
-       .irq_mask = amazon_disable_irq,
-       .irq_mask_ack = amazon_mask_and_ack_irq,
-};
-
-/* Cascaded interrupts from IM0-4 */
-static inline void amazon_hw_irqdispatch(u8 line)
-{
-       u32 irq;
-
-       irq = (amazon_readl(AMAZON_ICU_IM_VEC) >> (line * 5)) & AMAZON_ICU_IM0_VEC_MASK;
-       if (line == 0 && irq <= 11 && irq >= 0) {
-               //DMA fixed to IM0_IRL0
-               irq = 0;
-       }
-       do_IRQ(irq + INT_NUM_IRQ0 + (line * 32));
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-       unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-       if (pending & CAUSEF_IP7){
-               do_IRQ(MIPS_CPU_TIMER_IRQ);
-               goto out;
-       } else {
-               unsigned int i;
-               for (i = 0; i <= 4; i++)
-               {
-                       if(pending & (CAUSEF_IP2 << i)){
-                               amazon_hw_irqdispatch(i);
-                               goto out;
-                       }
-               }
-       }
-       printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
-out:
-       return;
-}
-
-static struct irqaction cascade = {
-       .handler        = no_action,
-       .flags          = IRQF_DISABLED,
-       .name           = "cascade",
-};
-
-void __init arch_init_irq(void)
-{
-       int i;
-
-       /* mask all interrupt sources */
-       for(i = 0; i <= 4; i++){
-               amazon_writel(0, AMAZON_ICU_IM0_IER + (i * 0x10));
-       }
-
-       mips_cpu_irq_init();
-
-       /* set up irq cascade */
-       for (i = 2; i <= 6; i++) {
-               setup_irq(i, &cascade);
-       }
-
-       for (i = INT_NUM_IRQ0; i <= INT_NUM_IM4_IRL31; i++)
-               irq_set_chip_and_handler(i, &amazon_irq_type,
-                       handle_level_irq);
-
-       set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-}
-
-void __cpuinit arch_fixup_c0_irqs(void)
-{
-       /* FIXME: check for CPUID and only do fix for specific chips/versions */
-       cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-       cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-}
diff --git a/target/linux/amazon/files/arch/mips/amazon/pci.c b/target/linux/amazon/files/arch/mips/amazon/pci.c
deleted file mode 100644 (file)
index 1b2afb9..0000000
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- *  Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
- *  Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-/* FIXME: convert nasty volatile register derefs to readl/writel calls */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/paccess.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/amazon.h>
-
-#define AMAZON_PCI_REG32( addr )                 (*(volatile u32 *)(addr))
-#ifndef AMAZON_PCI_MEM_BASE
-#define AMAZON_PCI_MEM_BASE    0xb2000000
-#endif
-#define AMAZON_PCI_MEM_SIZE    0x00400000
-#define AMAZON_PCI_IO_BASE     0xb2400000
-#define AMAZON_PCI_IO_SIZE     0x00200000
-
-#define AMAZON_PCI_CFG_BUSNUM_SHF 16
-#define AMAZON_PCI_CFG_DEVNUM_SHF 11
-#define AMAZON_PCI_CFG_FUNNUM_SHF 8
-
-#define PCI_ACCESS_READ  0
-#define PCI_ACCESS_WRITE 1
-
-static struct resource pci_io_resource = {
-       .name = "io pci IO space",
-#if 1
-       .start = AMAZON_PCI_IO_BASE,
-       .end = AMAZON_PCI_IO_BASE + AMAZON_PCI_IO_SIZE - 1,
-#else
-       .start = 0,
-       .end = 0x00002000 - 1,
-#endif
-       .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-       .name = "ext pci memory space",
-       .start = AMAZON_PCI_MEM_BASE,
-       .end = AMAZON_PCI_MEM_BASE + AMAZON_PCI_MEM_SIZE - 1,
-       .flags = IORESOURCE_MEM
-};
-
-static int amazon_pci_config_access(unsigned char access_type,
-       struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
-{
-       unsigned long flags;
-       u32 pci_addr;
-       u32 val;
-       int ret;
-
-       /* Amazon support slot from 0 to 15 */
-       /* devfn 0 & 0x20 is itself */
-       if ((bus->number != 0) || (devfn > 0x7f) || (devfn == 0) || (devfn == 0x20))
-               return 1;
-
-       local_irq_save(flags);
-
-       pci_addr = AMAZON_PCI_CFG_BASE |
-               bus->number << AMAZON_PCI_CFG_BUSNUM_SHF |
-               devfn << AMAZON_PCI_CFG_FUNNUM_SHF |
-               (where & ~0x3);
-
-       if (access_type == PCI_ACCESS_WRITE)
-       {
-#ifdef CONFIG_SWAP_IO_SPACE
-               val = swab32(*data);
-#endif
-               ret = put_dbe(val, (u32 *)pci_addr);
-       } else {
-               ret = get_dbe(val, (u32 *)pci_addr);
-#ifdef CONFIG_SWAP_IO_SPACE
-               *data = swab32(val);
-#else
-               *data = val;
-#endif
-       }
-
-       amazon_writel(amazon_readl(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
-       amazon_writel(amazon_readl(STATUS_COMMAND_ADDR), STATUS_COMMAND_ADDR);
-       amazon_writel(amazon_readl(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
-       mb();
-       local_irq_restore(flags);
-
-       if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
-               return 1;
-
-       return ret; 
-}
-
-
-static int amazon_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
-{
-       u32 data = 0;
-
-       if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       if (size == 1)
-               *val = (data >> ((where & 3) << 3)) & 0xff;
-       else if (size == 2)
-               *val = (data >> ((where & 3) << 3)) & 0xffff;
-       else
-               *val = data;
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int amazon_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
-       u32 data = 0;
-
-       if (size == 4)
-       {
-               data = val;
-       } else {
-               if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
-                       return PCIBIOS_DEVICE_NOT_FOUND;
-
-               if (size == 1)
-                       data = (data & ~(0xff << ((where & 3) << 3))) |
-                               (val << ((where & 3) << 3));
-               else if (size == 2)
-                       data = (data & ~(0xffff << ((where & 3) << 3))) |
-                               (val << ((where & 3) << 3));
-       }
-
-       if (amazon_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops amazon_pci_ops = {
-       amazon_pci_read,
-       amazon_pci_write
-};
-
-static struct pci_controller amazon_pci_controller = {
-       .pci_ops = &amazon_pci_ops,
-       .mem_resource = &pci_mem_resource,
-       .mem_offset     = 0x00000000UL,
-       .io_resource = &pci_io_resource,
-       .io_offset      = 0x00000000UL,
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-       switch (slot) {
-               case 13:
-                       /* IDSEL = AD29 --> USB Host Controller */
-                       return INT_NUM_IM2_IRL15;
-               case 14:
-                       /* IDSEL = AD30 --> mini PCI connector */
-                       return INT_NUM_IM2_IRL14;
-               default:
-                       printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
-                       return 0;
-       }
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-       switch(dev->irq) {
-               case INT_NUM_IM2_IRL15:
-                       /* 
-                        * IDSEL = AD29 --> USB Host Controller
-                        * PCI_INTA/B/C--GPIO Port0.2--EXIN3
-                        * IN/ALT0:1 ALT1:0
-                        * PULL UP
-                        */
-                       (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffb;
-                       (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 4;
-                       (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffb;
-                       (*AMAZON_GPIO_P0_PUDSEL) =  (*AMAZON_GPIO_P0_PUDSEL) | 4;
-                       (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 4;
-                       //External Interrupt Node
-                       (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x6000; /* Low Level triggered */
-                       (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x8;
-                       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-                       break;
-               case INT_NUM_IM2_IRL14:
-                       /* 
-                        * IDSEL = AD30 --> mini PCI connector 
-                        * PCI_INTA--GPIO Port0.1--EXIN2
-                        * IN/ALT0:1 ALT1:0
-                        * PULL UP
-                        */
-                       (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffd;
-                       (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 2;
-                       (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffd;
-                       (*AMAZON_GPIO_P0_PUDSEL) =  (*AMAZON_GPIO_P0_PUDSEL) | 2;
-                       (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 2;
-                       //External Interrupt Node
-                       (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x600;
-                       (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x4;
-                       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-                       break;
-               default:
-                       return 1;
-       }
-       return 0;
-}
-
-int __init amazon_pci_init(void)
-{
-       u32 temp_buffer;
-
-#ifdef CONFIG_SWAP_IO_SPACE
-       AMAZON_PCI_REG32(IRM) = AMAZON_PCI_REG32(IRM) | (1<<27) | (1<<28);
-       wmb();
-#endif
-
-       AMAZON_PCI_REG32(CLOCK_CONTROL) = AMAZON_PCI_REG32(CLOCK_CONTROL) | (1<<ARB_CTRL_bit);
-       amazon_writel(amazon_readl(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
-
-       AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) = AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) | (1<<BUS_MASTER_ENABLE_BIT) |(1<<MEM_SPACE_ENABLE_BIT);
-
-       temp_buffer = AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR);
-       temp_buffer = temp_buffer | (1<< INTERNAL_ARB_ENABLE_BIT);
-       temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_REQ_MASK_2BITS);
-       temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_GNT_MASK_2BITS);
-
-       /* flash */
-       temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_REQ_MASK_2BITS);
-       temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_GNT_MASK_2BITS);
-
-       /* external master */
-       temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_REQ_MASK_2BITS);
-       temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_GNT_MASK_2BITS);
-
-       AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR) = temp_buffer;
-       wmb();
-
-       AMAZON_PCI_REG32(FPI_ADDRESS_MAP_0) = 0xb2000000;
-       AMAZON_PCI_REG32(FPI_ADDRESS_MAP_1) = 0xb2100000;
-       AMAZON_PCI_REG32(FPI_ADDRESS_MAP_2) = 0xb2200000;
-       AMAZON_PCI_REG32(FPI_ADDRESS_MAP_3) = 0xb2300000;
-       AMAZON_PCI_REG32(FPI_ADDRESS_MAP_4) = 0xb2400000;
-       AMAZON_PCI_REG32(FPI_ADDRESS_MAP_5) = 0xb2500000;
-       AMAZON_PCI_REG32(FPI_ADDRESS_MAP_6) = 0xb2600000;
-       AMAZON_PCI_REG32(FPI_ADDRESS_MAP_7) = 0xb2700000;
-
-       AMAZON_PCI_REG32(BAR11_MASK) = 0x0c000008;
-       AMAZON_PCI_REG32(PCI_ADDRESS_MAP_11) = 0x0;
-       AMAZON_PCI_REG32(BAR1_ADDR) = 0x0;
-       amazon_writel(amazon_readl(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
-       //use 8 dw burse length
-       AMAZON_PCI_REG32(FPI_BURST_LENGTH) = 0x303;
-
-       amazon_pci_controller.io_map_base = (unsigned long)ioremap(AMAZON_PCI_IO_BASE, AMAZON_PCI_IO_SIZE - 1);
-       register_pci_controller(&amazon_pci_controller);
-       return 0;
-}
-arch_initcall(amazon_pci_init);
diff --git a/target/linux/amazon/files/arch/mips/amazon/prom.c b/target/linux/amazon/files/arch/mips/amazon/prom.c
deleted file mode 100644 (file)
index 3095fd5..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright 2007 John Crispin <blogic@openwrt.org> 
- */
-
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <asm/bootinfo.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/model.h>
-#include <asm/cpu.h>
-
-void prom_putchar(char c)
-{
-       /* Wait for FIFO to empty */
-       while ((amazon_readl(AMAZON_ASC_FSTAT) >> 8) != 0x00) ;
-       /* Crude cr/nl handling is better than none */
-       if(c == '\n')
-               amazon_writel('\r', AMAZON_ASC_TBUF);
-       amazon_writel(c, AMAZON_ASC_TBUF);
-}
-
-void __init prom_init(void)
-{
-       char **envp = (char **) fw_arg2;
-
-       int memsize = 16; /* assume 16M as default */
-
-       envp = (char **)KSEG1ADDR((unsigned long)envp);
-       while (*envp) {
-               char *e = (char *)KSEG1ADDR(*envp);
-
-               if (!strncmp(e, "memsize=", 8)) {
-                       e += 8;
-                       memsize = simple_strtoul(e, NULL, 10);
-               }
-               envp++;
-       }
-       memsize *= 1024 * 1024;
-
-       strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2");
-       
-       add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
-}
-
-void prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
-       return BOARD_SYSTEM_TYPE;
-}
diff --git a/target/linux/amazon/files/arch/mips/amazon/setup.c b/target/linux/amazon/files/arch/mips/amazon/setup.c
deleted file mode 100644 (file)
index ff1a109..0000000
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- *      Copyright (C) 2004 Peng Liu <peng.liu@infineon.com>
- *      Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *      Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *      
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/model.h>
-
-static unsigned int r4k_offset;
-static unsigned int r4k_cur;
-
-/* required in arch/mips/kernel/kspd.c */
-unsigned long cpu_khz;
-
-static void amazon_reboot_setup(void);
-
-/* the CPU clock rate - lifted from u-boot */
-unsigned int amazon_get_cpu_hz(void)
-{
-       /*-----------------------------------*/
-       /**CGU CPU Clock Reduction Register***/ 
-       /*-----------------------------------*/
-       switch(amazon_readl(AMAZON_CGU_CPUCRD) & 0x3){
-               case 0:
-                       /*divider ration 1/1, 235 MHz clock */
-                       return 235000000;
-               case 1:
-                       /*divider ration 2/3, 235 MHz clock, clock not accurate, here */
-                       return 150000000;
-               case 2:
-                       /*divider ration 1/2, 235 MHz clock */
-                       return 117500000;
-               default:
-                       /*divider ration 1/4, 235 MHz clock */
-                       return 58750000;
-       }
-}
-
-/* the FPI clock rate - lifted from u-boot */
-unsigned int amazon_get_fpi_hz(void)
-{
-       unsigned int  clkCPU;
-       clkCPU = amazon_get_cpu_hz();
-
-       /*-------------------------------------*/
-       /***CGU Clock Divider Select Register***/
-       /*-------------------------------------*/
-       switch (amazon_readl(AMAZON_CGU_DIV) & 0x3)
-       {
-               case 1:
-                       return clkCPU >> 1;
-               case 2:
-                       return clkCPU >> 2;
-               default:
-                       return clkCPU;
-               /* '11' is reserved */
-       }
-}
-EXPORT_SYMBOL(amazon_get_fpi_hz);
-
-/* this doesn't really belong here, but it's a convenient location */
-unsigned int amazon_get_cpu_ver(void)
-{
-       static unsigned int cpu_ver = 0;
-       if (cpu_ver == 0)
-               cpu_ver = amazon_readl(AMAZON_MCD_CHIPID) & 0xFFFFF000;
-       return cpu_ver;
-}
-
-static inline u32 amazon_get_counter_resolution(void)
-{
-       u32 res;
-       __asm__ __volatile__(
-               ".set   push\n"
-               ".set   mips32r2\n"
-               ".set   noreorder\n"
-               "rdhwr  %0, $3\n"
-               "ehb\n"
-               ".set pop\n"
-               : "=&r" (res)
-               : /* no input */
-               : "memory");
-       instruction_hazard();
-       return res;
-}
-
-void __init plat_time_init(void)
-{
-       mips_hpt_frequency = amazon_get_cpu_hz() / amazon_get_counter_resolution();
-       r4k_offset = mips_hpt_frequency / HZ;
-       printk("mips_hpt_frequency:%d\n", mips_hpt_frequency);
-       printk("r4k_offset: %08x(%d)\n", r4k_offset, r4k_offset);
-
-       r4k_cur = (read_c0_count() + r4k_offset);
-       write_c0_compare(r4k_cur);
-
-       /* enable the timer in the PMU */
-       amazon_writel(amazon_readl(AMAZON_PMU_PWDCR)| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI, AMAZON_PMU_PWDCR);
-       
-       /* setup the GPTU for timer tick  f_fpi == f_gptu*/
-       amazon_writel(0x0100, AMAZON_GPTU_CLC);
-       amazon_writel(0xffff, AMAZON_GPTU_CAPREL);
-       amazon_writel(0x80C0, AMAZON_GPTU_T6CON);
-}
-
-void __init plat_mem_setup(void)
-{      
-       u32 chipid = 0;
-       u32 part_no = 0;
-       
-       chipid = amazon_readl(AMAZON_MCD_CHIPID);
-       part_no = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid);
-       
-       if(part_no == AMAZON_CHIPID_YANGTSE){
-               printk("Yangtse Version\n");    
-       } else if (part_no == AMAZON_CHIPID_STANDARD) {
-               printk(SYSTEM_MODEL_NAME "\n");
-       } else {
-               printk("unknown version %8x\n",part_no);
-       }
-       
-       amazon_reboot_setup();
-
-       //stop reset TPE and DFE
-       amazon_writel(0, AMAZON_RST_REQ);
-       //clock
-       amazon_writel(0x3fff, AMAZON_PMU_PWDCR);
-       //reenable trace capability
-       part_no = readl(AMAZON_BCU_ECON);
-
-       ioport_resource.start = IOPORT_RESOURCE_START;
-       ioport_resource.end = IOPORT_RESOURCE_END;
-       iomem_resource.start = IOMEM_RESOURCE_START;
-       iomem_resource.end = IOMEM_RESOURCE_END;
-}
-
-static void amazon_machine_restart(char *command)
-{
-    local_irq_disable();
-    amazon_writel(AMAZON_RST_ALL, AMAZON_RST_REQ);
-    for (;;) ;
-}
-
-static void amazon_machine_halt(void)
-{
-    printk(KERN_NOTICE "System halted.\n");
-    local_irq_disable();
-    for (;;) ;
-}
-
-static void amazon_machine_power_off(void)
-{
-       printk(KERN_NOTICE "Please turn off the power now.\n");
-    local_irq_disable();
-    for (;;) ;
-}
-
-static void amazon_reboot_setup(void)
-{
-       _machine_restart = amazon_machine_restart;
-       _machine_halt = amazon_machine_halt;
-       pm_power_off = amazon_machine_power_off;
-}
diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h
deleted file mode 100644 (file)
index e72b7d5..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __AMAZON_IRQ_H
-#define __AMAZON_IRQ_H
-
-#define NR_IRQS      256
-#include_next <irq.h>
-
-#endif
diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h
deleted file mode 100644 (file)
index af8c3e9..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Ralf Baechle
- */
-#ifndef __ASM_MACH_AMAZON_MANGLE_PORT_H
-#define __ASM_MACH_AMAZON_MANGLE_PORT_H
-
-#define __swizzle_addr_b(port) (port)
-#define __swizzle_addr_w(port) ((port) ^ 2)
-#define __swizzle_addr_l(port) (port)
-#define __swizzle_addr_q(port) (port)
-
-/*
- * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
- * less sane hardware forces software to fiddle with this...
- *
- * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
- * you can't have the numerical value of data and byte addresses within
- * multibyte quantities both preserved at the same time.  Hence two
- * variations of functions: non-prefixed ones that preserve the value
- * and prefixed ones that preserve byte addresses.  The latters are
- * typically used for moving raw data between a peripheral and memory (cf.
- * string I/O functions), hence the "__mem_" prefix.
- */
-#if defined(CONFIG_SWAP_IO_SPACE)
-
-# define ioswabb(a, x)         (x)
-# define __mem_ioswabb(a, x)   (x)
-# define ioswabw(a, x)         le16_to_cpu(x)
-# define __mem_ioswabw(a, x)   (x)
-# define ioswabl(a, x)         le32_to_cpu(x)
-# define __mem_ioswabl(a, x)   (x)
-# define ioswabq(a, x)         le64_to_cpu(x)
-# define __mem_ioswabq(a, x)   (x)
-
-#else
-
-# define ioswabb(a, x)         (x)
-# define __mem_ioswabb(a, x)   (x)
-# define ioswabw(a, x)         (x)
-# define __mem_ioswabw(a, x)   cpu_to_le16(x)
-# define ioswabl(a, x)         (x)
-# define __mem_ioswabl(a, x)   cpu_to_le32(x)
-# define ioswabq(a, x)         (x)
-# define __mem_ioswabq(a, x)   cpu_to_le32(x)
-
-#endif
-
-#endif /* __ASM_MACH_AMAZON_MANGLE_PORT_H */
diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h
deleted file mode 100644 (file)
index da42ee5..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#ifndef __ASM_MIPS_MACH_AMAZON_WAR_H
-#define __ASM_MIPS_MACH_AMAZON_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR     0
-#define R4600_V1_HIT_CACHEOP_WAR        0
-#define R4600_V2_HIT_CACHEOP_WAR        0
-#define R5432_CP0_INTERRUPT_WAR         0
-#define BCM1250_M3_WAR                  0
-#define SIBYTE_1956_WAR                 0
-#define MIPS4K_ICACHE_REFILL_WAR        0
-#define MIPS_CACHE_SYNC_WAR             0
-#define TX49XX_ICACHE_INDEX_INV_WAR     0
-#define RM9000_CDEX_SMP_WAR             0
-#define ICACHE_REFILLS_WORKAROUND_WAR   0
-#define R10000_LLSC_WAR                 0
-#define MIPS34K_MISSED_ITLB_WAR         0
-
-#endif
diff --git a/target/linux/amazon/files/drivers/atm/amazon_tpe.c b/target/linux/amazon/files/drivers/atm/amazon_tpe.c
deleted file mode 100644 (file)
index b507494..0000000
+++ /dev/null
@@ -1,3074 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- */
-//-----------------------------------------------------------------------
-/*
- * Description:
- *     Driver for Infineon Amazon TPE
- */
-//-----------------------------------------------------------------------
-/* Author:     peng.liu@infineon.com
- * Created:    12-April-2004
- */
-//-----------------------------------------------------------------------
-/* History
- * Last changed on: 13 Oct. 2004
- * Last changed by: peng.liu@infineon.com
- * Last changed on: 28 Jan. 2004
- * Last changed by: peng.liu@infineon.com
- * Last changed Reason:
- *     - AAL5R may send more bytes than expected in MFL (so far, confirmed as 64 bytes)
- */
-// 507261:tc.chen 2005/07/26 re-organize code address map to improve performance.
-// 507281:tc.chen 2005/07/28 fix f4 segment isssue
-/* 511045:linmars 2005/11/04 from Liu.Peng: change NRT_VBR bandwidth calculation based on scr instead of pcr */
-#ifndef __KERNEL__
-#define __KERNEL__
-#endif 
-#ifndef EXPORT_SYMTAB
-#define EXPORT_SYMTAB
-#endif
-
-/*TPE level loopback, bypass AWARE DFE */
-#undef TPE_LOOPBACK
-
-/* enable debug options */                     
-#undef AMAZON_ATM_DEBUG
-
-/* enable rx error packet analysis */
-#undef AMAZON_ATM_DEBUG_RX
-
-/* test AAL5 Interrupt */
-#undef  AMAZON_TPE_TEST_AAL5_INT
-
-/* dump packet */
-#undef AMAZON_TPE_DUMP
-
-/* read ARC register*/
-/* this register is located in side DFE module*/
-#undef AMAZON_TPE_READ_ARC
-
-/* software controlled reassembly */
-#undef AMAZON_TPE_SCR
-
-/* recovery from AAL5 bug */
-#undef AMAZON_TPE_AAL5_RECOVERY
-
-#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
-#define ALPHAEUS_BASE_ADDR     0x31c00
-#define A_CFG_ADDR             (ALPHAEUS_BASE_ADDR+0x04)
-#define AR_CB0_STATUS_ADDR             (ALPHAEUS_BASE_ADDR+0x2c)
-#define AR_CB1_STATUS_ADDR             (ALPHAEUS_BASE_ADDR+0x30)
-#define AT_CELL0_ADDR          (ALPHAEUS_BASE_ADDR+0x90)
-#define AR_CELL0_ADDR          (ALPHAEUS_BASE_ADDR+0x1a0)
-#define AR_CD_CNT0_ADDR                (ALPHAEUS_BASE_ADDR+0x1c8)
-#endif
-
-#include <linux/module.h>
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/kernel.h> 
-#include <linux/slab.h>  
-#include <linux/fs.h> 
-#include <linux/types.h>
-#include <linux/errno.h>  
-#include <linux/time.h>
-#include <linux/atm.h>
-#include <linux/atmdev.h>
-#include <linux/netdevice.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/bitops.h>
-#include <asm/system.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-
-#include <linux/in.h>
-#include <linux/netdevice.h> 
-#include <linux/etherdevice.h> 
-#include <linux/ip.h>
-#include <linux/tcp.h> 
-#include <linux/skbuff.h>
-#include <linux/in6.h>
-#include <linux/delay.h>
-#include <asm/amazon/atm_defines.h>
-#include <asm/amazon/amazon_dma.h>
-#include <asm/amazon/amazon_tpe.h>
-
-#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
-#include <asm/amazon/amazon_mei.h>
-#include <asm/amazon/amazon_mei_app.h>
-#endif
-
-#define AMAZON_TPE_EMSG(fmt, args...) printk( KERN_ERR  "%s: " fmt,__FUNCTION__, ## args)
-
-/***************************************** External Functions *******************************************/
-extern unsigned int amazon_get_fpi_hz(void);
-extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
-extern void amz_push_oam(unsigned char *);
-
-//amazon_mei.c
-#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
-extern MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize);
-extern MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
-#endif
-
-/***************************************** Internal Functions *******************************************/
-int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data);
-/***************************************** Global Data *******************************************/
-amazon_atm_dev_t g_atm_dev;            //device data
-static struct tq_struct swex_start_task;       //BH task
-static struct tq_struct swex_complete_task;    //BH task
-#ifdef AMAZON_TPE_SCR
-static struct tq_struct a5r_task;              //BH task
-#endif
-static struct dma_device_info  g_dma_dev;      //for DMA
-static struct atm_dev * amazon_atm_devs[AMAZON_ATM_PORT_NUM];
-static struct oam_last_activity g_oam_time_stamp[AMAZON_ATM_MAX_VCC_NUM];
-static u8 g_oam_cell[AMAZON_AAL0_SDU+4];       //for OAM cells
-#ifdef AMAZON_CHECK_LINK
-static int adsl_link_status;                   //ADSL link status, 0:down, 1:up
-#endif //AMAZON_CHECK_LINK
-/***************************************** Module Parameters *************************************/
-// Parameter Definition for module
-static int port_enable0 = 1;                           // Variable for parameter port_enable0
-static int port_enable1 = 0;                           // Variable for parameter port_enable1
-static int port_max_conn0 = 15;                                // Variable for parameter port_max_conn0
-static int port_max_conn1 = 0;                         // Variable for parameter port_max_conn1
-static int port_cell_rate_up0 = 7500;                  // Variable for parameter port_cell_rate_up0
-static int port_cell_rate_up1 = 7500;                  // Variable for parameter port_cell_rate_up1
-
-
-static int qsb_tau = 1;                                        // Variable for parameter qsb_tau
-static int qsb_srvm = 0xf;                             // Variable for parameter qsb_srvm
-static int qsb_tstep = 4 ;                             // Variable for parameter qsb_tstep
-
-static int cbm_nrt = 3900;                             // Variable for parameter cbm_nrt
-static int cbm_clp0 =3500;                             // Variable for parameter cbm_clp0
-static int cbm_clp1 =3200;                             // Variable for parameter cbm_clp1
-static int cbm_free_cell_no = AMAZON_ATM_FREE_CELLS;   // Variable for parameter cbm_free_cell_no
-
-static int a5_fill_pattern = 0x7e;                     // Variable for parameter a5_fill_pattern '~'
-static int a5s_mtu = 0x700;                            // mtu for tx
-static int a5r_mtu = 0x700;                            // mtu for rx
-
-static int oam_q_threshold =   64;                     // oam queue threshold, minium value 64
-static int rx_q_threshold =    1000;                   // rx queue threshold, minium value 64
-static int tx_q_threshold =    800;                    // tx queue threshold, minium value 64
-
-MODULE_PARM(port_max_conn0, "i");
-MODULE_PARM_DESC(port_max_conn0, "Maximum atm connection for port #0");
-MODULE_PARM(port_max_conn1, "i");
-MODULE_PARM_DESC(port_max_conn1, "Maximum atm connection for port #1");
-MODULE_PARM(port_enable0, "i");
-MODULE_PARM_DESC(port_enable0, "0 -> port disabled, 1->port enabled");
-MODULE_PARM(port_enable1, "i");
-MODULE_PARM_DESC(port_enable1, "0 -> port disabled, 1->port enabled");
-MODULE_PARM(port_cell_rate_up0, "i");
-MODULE_PARM_DESC(port_cell_rate_up0, "ATM port upstream rate in cells/s");
-MODULE_PARM(port_cell_rate_up1, "i");
-MODULE_PARM_DESC(port_cell_rate_up1, "ATM port upstream rate in cells/s");
-
-MODULE_PARM(qsb_tau,"i");
-MODULE_PARM_DESC(qsb_tau, "Cell delay variation. value must be > 0");
-MODULE_PARM(qsb_srvm, "i");
-MODULE_PARM_DESC(qsb_srvm, "Maximum burst size");
-MODULE_PARM(qsb_tstep, "i");
-MODULE_PARM_DESC(qsb_tstep, "n*32 cycles per sbs cycles n=1,2,4");
-
-MODULE_PARM(cbm_nrt, "i");
-MODULE_PARM_DESC(cbm_nrt, "Non real time threshold for cell buffer");
-MODULE_PARM(cbm_clp0, "i");
-MODULE_PARM_DESC(cbm_clp0, "Threshold for cells with cell loss priority 0");
-MODULE_PARM(cbm_clp1, "i");
-MODULE_PARM_DESC(cbm_clp1, "Threshold for cells with cell loss priority 1");
-MODULE_PARM(cbm_free_cell_no, "i");
-MODULE_PARM_DESC(cbm_free_cell_no, "Number of cells in the cell buffer manager");
-
-MODULE_PARM(a5_fill_pattern, "i");
-MODULE_PARM_DESC(a5_fill_pattern, "filling pattern (PAD) for aal5 frames");
-MODULE_PARM(a5s_mtu, "i");
-MODULE_PARM_DESC(a5s_mtu, "max. SDU for upstream");
-MODULE_PARM(a5r_mtu, "i");
-MODULE_PARM_DESC(a5r_mtu, "max. SDU for downstream");                                                                               
-
-MODULE_PARM(oam_q_threshold, "i");
-MODULE_PARM_DESC(oam_q_threshold, "oam queue threshold");
-
-MODULE_PARM(rx_q_threshold, "i");
-MODULE_PARM_DESC(rx_q_threshold, "downstream/rx queue threshold");
-
-MODULE_PARM(tx_q_threshold, "i");
-MODULE_PARM_DESC(tx_q_threshold, "upstream/tx queue threshold");
-
-/***************************************** local functions *************************************/
-/* Brief: valid QID
- * Return: 1 if valid
- *        0 if not
- */
-static inline int valid_qid(int qid)
-{
-       return ( (qid>0) && (qid<AMAZON_ATM_MAX_QUEUE_NUM));
-}
-
-/*
- * Brief: align to 16 bytes boundary 
- * Parameter:
- *     skb
- * Description:
- *     use skb_reserve to adjust the data pointer
- *     don't change head pointer
- *     pls allocate extrac 16 bytes before call this function
- */
-static void inline alloc_align_16(struct sk_buff * skb)
-{
-       if ( ( ((u32) (skb->data)) & 15) != 0){
-               AMAZON_TPE_DMSG("need to adjust the alignment manually\n");
-               skb_reserve(skb, 16 - (((u32) (skb->data)) & 15) );
-       }
-
-}
-
-/*
- * Brief: initialize the device according to the module paramters
- * Return: not NULL    -       ok
- *        NULL         -       fails
- * Description: arrange load parameters and call the hardware initialization routines
- */
-static void atm_init_parameters(amazon_atm_dev_t *dev)
-{
-       //port setting
-       dev->ports[0].enable = port_enable0;
-       dev->ports[0].max_conn = port_max_conn0;
-       dev->ports[0].tx_max_cr = port_cell_rate_up0;
-       if (port_enable1){
-               dev->ports[1].enable = port_enable1;
-               dev->ports[1].max_conn = port_max_conn1;
-               dev->ports[1].tx_max_cr = port_cell_rate_up1;
-       }
-
-       //aal5
-       dev->aal5.padding_byte = a5_fill_pattern;
-       dev->aal5.tx_max_sdu = a5s_mtu;
-       dev->aal5.rx_max_sdu = a5r_mtu;
-
-       //cbm
-       dev->cbm.nrt_thr = cbm_nrt;
-       dev->cbm.clp0_thr = cbm_clp0;
-       dev->cbm.clp1_thr = cbm_clp1;
-       dev->cbm.free_cell_cnt = cbm_free_cell_no;
-
-       //qsb
-       dev->qsb.tau = qsb_tau;
-       dev->qsb.tstepc =qsb_tstep;
-       dev->qsb.sbl = qsb_srvm;
-       
-       //allocate on the fly
-       dev->cbm.mem_addr = NULL;
-       dev->cbm.qd_addr = NULL;
-}
-
-
-/*     Brief:          Find QID for VCC
- *     Parameters:     vcc     - VCC data structure
- *     Return Value:   -EINVAL         - VCC not found
- *                     qid             - QID for this VCC
- *     Description:
- *     This function returns the QID of a given VCC
- */
-static int amazon_atm_get_queue(struct atm_vcc* vcc)
-{
-       int     i;
-       for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
-               if (g_atm_dev.queues[i].vcc == vcc) return i;
-       }
-       return -EINVAL;
-}
-
-
-/*
- *     Brief:          Find QID for VPI/VCI
- *     Parameters:     vpi     - VPI to found
- *                     vci     - VCI to found
- *
- *     Return Value:   -EINVAL         - VPI/VCI not found
- *                     qid             - QID for this VPI/VCI
- *
- *     Description:
- *     This function returns the QID for a given VPI/VCI. itf doesn't matter
- */
-static int amazon_atm_find_vpivci(u8 vpi, u16 vci)
-{
-       int     i;
-       struct atm_vcc * vcc;
-       for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
-               if ( (vcc = g_atm_dev.queues[i].vcc)!= NULL) {
-                       if ((vcc->vpi == vpi) && (vcc->vci == vci)) return i;
-               }
-       }
-       return -EINVAL;
-}
-
-/*     Brief:          Find QID for VPI
- *     Parameters:     vpi     - VPI to found
- *     Return Value:   -EINVAL         - VPI not found
- *                     qid             - QID for this VPI
- *
- *     Description:
- *     This function returns the QID for a given VPI. itf and VCI don't matter
- */
-static int amazon_atm_find_vpi(u8 vpi)
-{
-       int     i;
-       for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
-               if ( g_atm_dev.queues[i].vcc!= NULL) {
-                       if (g_atm_dev.queues[i].vcc->vpi == vpi) return i;
-               }
-       }
-       return -EINVAL;
-}
-
-/*
- *     Brief:          Clears QID entries for VCC
- *
- *     Parameters:     vcc     - VCC to found
- *
- *     Description:
- *     This function searches for the given VCC and sets it to NULL if found.
- */
-static inline void amazon_atm_clear_vcc(int i)
-{
-       g_atm_dev.queues[i].vcc = NULL;
-       g_atm_dev.queues[i].free = 1;
-}
-
-
-/*
- * Brief:      dump skb data
- */
-static inline void dump_skb(u32 len, char * data)
-{
-#ifdef AMAZON_TPE_DUMP
-       int i;
-       for(i=0;i<len;i++){     
-               printk("%2.2x ",(u8)(data[i]));
-               if (i % 16 == 15)
-                       printk("\n");
-       }
-       printk("\n");
-#endif
-}
-
-/*
- * Brief:      dump queue descriptor
- */
-static inline void dump_qd(int qid)
-{
-#ifdef AMAZON_TPE_DUMP
-       u8 * qd_addr;
-       if (valid_qid(qid) != 1) return;
-       qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
-       AMAZON_TPE_EMSG("qid: %u [%8x][%8x][%8x][%8x]\n", qid
-               ,readl(qd_addr+qid*CBM_QD_SIZE+0x0)
-               ,readl(qd_addr+qid*CBM_QD_SIZE+0x4)
-               ,readl(qd_addr+qid*CBM_QD_SIZE+0x8)
-               ,readl(qd_addr+qid*CBM_QD_SIZE+0xc));
-#endif
-}
-
-/*
- * Brief:      release TX skbuff
- */
-static inline void amazon_atm_free_tx_skb_vcc(struct atm_vcc *vcc, struct sk_buff *skb)
-{
-       if ( vcc->pop != NULL) {
-               vcc->pop(vcc, skb);
-        } else {
-               dev_kfree_skb_any(skb);
-        }
-}
-/*
- * Brief:      release TX skbuff
- */
-static inline void amazon_atm_free_tx_skb(struct sk_buff *skb)
-{
-       struct atm_vcc* vcc = ATM_SKB(skb)->vcc;
-       if (vcc!=NULL){
-               amazon_atm_free_tx_skb_vcc(vcc,skb);
-       } else {
-               dev_kfree_skb_any(skb);//fchang:Added
-       }
-}
-
-/* Brief:      divide by 64 and round up
- */
-static inline u32 divide_by_64_round_up(int input)
-{
-       u32 tmp1;
-       tmp1 = (u32) input;
-        tmp1 = (tmp1%64)?(tmp1/64 + 1): (tmp1/64);
-        if (tmp1 == 0) tmp1 = 1;
-       return tmp1;
-}
-
-/*
- * Brief:      statistics
- */
-#ifdef AMAZON_ATM_DEBUG
-static inline void queue_statics(int qid, qs_t idx)
-{
-       if (valid_qid(qid)){
-               g_atm_dev.queues[qid].qs[idx]++;
-       }
-}
-#else  //not AMAZON_ATM_DEBUG
-static inline void queue_statics(int qid, qs_t idx){}
-#endif //AMAZON_ATM_DEBUG              
-
-
-/*     Brief:  set dma tx full, i.e. there is no available descriptors
- */
-static void inline atm_dma_full(void)
-{
-       AMAZON_TPE_DMSG("ch0 is full\n");
-       atomic_set(&g_atm_dev.dma_tx_free_0,0);
-}
-
-/*
- *     Brief   set dma tx free (at least one descript is available)
- */
-inline static void atm_dma_free(void)
-{
-       AMAZON_TPE_DMSG("ch0 is free\n");
-       atomic_set(&g_atm_dev.dma_tx_free_0,1);
-}
-
-
-/*     Brief:          return the status of DMA TX descriptors
- *     Parameters:     TX channel  (DMA_TX_CH0, TX_CH1)
- *     Return:
- *             1:      there are availabel TX descriptors
- *             0:      no available
- *     Description:
- *
- */
-inline int dma_may_send(int ch)
-{
-       if (atomic_read(&g_atm_dev.dma_tx_free_0)){
-               return 1;
-       }
-       return 0;
-}
-
-/******************************* global functions *********************************/ 
-/*
- *     Brief:          SWIE Cell Extraction Start Routine
- *                     and task routine for swex_complete_task
- *     Parameters:     irq_stat        - interrupt status
- *
- *     Description:
- *     This is the routine for extracting cell. It will schedule itself if the hardware is busy.
- *     This routine runs in interrupt context
- */
-void amazon_atm_swex(void * irq_stat)
-{
-       u32 ex_stat=0;
-       u32 addr;
-       // Read extraction status register
-       ex_stat = readl(CBM_HWEXSTAT0_ADDR);
-
-       // Check if extraction/insertion is in progress 
-       if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) || (test_and_set_bit(SWIE_LOCK, &(g_atm_dev.swie.lock))!=0)) {
-               AMAZON_TPE_DMSG(" extraction in progress. Will wait\n");
-               swex_start_task.data = irq_stat;
-               queue_task(&swex_start_task, &tq_immediate);
-               mark_bh(IMMEDIATE_BH);
-       }else {
-               // Extract QID
-               g_atm_dev.swie.qid = (((u32)irq_stat) >> 24);
-               AMAZON_TPE_DMSG("extracting from qid=%u\n",g_atm_dev.swie.qid);
-               //read status word
-               addr = KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
-               addr = readl((addr + g_atm_dev.swie.qid * 0x10 + 4) & 0xFFFFFFC0);
-               addr = KSEG1ADDR(addr);
-               g_atm_dev.swie.sw = readl(addr+52)&SWIE_ADDITION_DATA_MASK;
-               AMAZON_TPE_DMSG("cell addition word: %8x \n", g_atm_dev.swie.sw);
-               
-               // Start extraction
-               AMAZON_WRITE_REGISTER_L(g_atm_dev.swie.qid | SWIE_CBM_PID_SUBADDR, CBM_HWEXPAR0_ADDR);
-               AMAZON_WRITE_REGISTER_L(SWIE_CBM_SCE0, CBM_HWEXCMD_ADDR);
-       }
-}
-#ifdef AMAZON_TPE_SCR
-u32 g_a5r_wait=0;
-/*
- *     Brief:          AAL5 Packet Extraction Routine  and task routine for a5r_task
- *     Parameters:     irq_stat        - interrupt status
- *
- *     Description:
- *     This is the routine for extracting frame. It will schedule itself if the hardware is busy.
- *     This routine runs in interrupt context
- */
-void amazon_atm_a5r(void* qid)
-{
-       volatile u32 ex_stat=0;
-       u32 addr;
-       u32 a5r_wait=0;
-
-       ex_stat = readl(CBM_HWEXSTAT0_ADDR);
-#if 0
-       // Check if extraction/insertion is in progress 
-       if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) {
-               AMAZON_TPE_DMSG(" extraction in progress. Will wait\n");
-               a5r_task.data = qid;
-               queue_task(&a5r_task, &tq_immediate);
-               mark_bh(IMMEDIATE_BH);
-       }else {
-               AMAZON_TPE_DMSG("extracting from qid=%u\n",(u8)qid);
-               // Start extraction
-               AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
-               AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
-       }
-#else
-       //while ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) {
-       while ( ex_stat != 0x80){
-               a5r_wait++;
-               ex_stat = readl(CBM_HWEXSTAT0_ADDR);
-#if    0
-               if (a5r_wait >= 0xffffff){
-                       a5r_wait=0;
-                       printk(".");
-               }
-#endif
-       }
-       if (a5r_wait > g_a5r_wait){
-               g_a5r_wait = a5r_wait;
-       }
-       AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
-       AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
-#endif
-}
-
-#endif //AMAZON_TPE_SCR
-
-/*     Brief:  Handle F4/F5 OAM cell
- *     Return:
- *             0       ok
- *             <0      fails
- */
-static int inline amazon_handle_oam_cell(void *data, u8 vpi, u16 vci,u32 status)
-{
-       struct atm_vcc*         vcc=NULL;
-       int qid;
-       if (!status&SWIE_EOAM_MASK){
-               AMAZON_TPE_EMSG("unknown cell received, discarded\n");
-               goto amazon_handle_oam_cell_err_exit;
-       }else if (status&SWIE_ECRC10ERROR_MASK){
-               AMAZON_TPE_EMSG("CRC-10 Error Status:%8x, discarded\n", status);
-               goto amazon_handle_oam_cell_err_exit;
-       }else{
-               if(status & (SWIE_EVCI3_MASK |SWIE_EVCI4_MASK)){
-                       //F4 level (VPI) OAM, Assume duplex
-                       qid = amazon_atm_find_vpi(vpi)+CBM_RX_OFFSET;
-               }else if (status & (SWIE_EPTI4_MASK|SWIE_EPTI5_MASK)){
-                       //F5 level (VCI) OAM, Assume duplex
-                       qid = amazon_atm_find_vpivci(vpi,vci)+CBM_RX_OFFSET;                    
-               }else{
-                       qid = -1;
-                       AMAZON_TPE_EMSG("non-F4/F5 OAM cells?, discarded\n");
-                       goto amazon_handle_oam_cell_err_exit;
-               }
-       }
-       if (valid_qid(qid) && ((vcc = g_atm_dev.queues[qid].vcc)!=NULL)){
-               //TODO, should we do this for ALL OAM types? (Actually only User and CC)
-               g_atm_dev.queues[qid].access_time=xtime;
-               if (vcc->push_oam){
-                       (*vcc->push_oam)(vcc,data);
-               }else{
-                       amz_push_oam(data);
-               }
-       }else{
-               AMAZON_TPE_EMSG("no VCC yet\n");
-               goto amazon_handle_oam_cell_err_exit;
-       }
-       return 0;
-amazon_handle_oam_cell_err_exit:       
-       dump_skb(AMAZON_AAL0_SDU,(char *)data); 
-       return -1;
-}
-
-/*     Brief:  SWIE Cell Extraction Finish Routine 
- *             and task routine for swex_complete_task
- *     Description:
- *     1.Allocate a buffer of type struct sk_buff
- *     2.Copy the data from the temporary memory to this buffer
- *     3.Push the data to upper layer
- *     4.Update the statistical data if necessary
- *     5.Release the temporary data
-
- */
-void amazon_atm_swex_push(void * data)
-{
-       struct atm_vcc*         vcc=NULL;
-       struct sk_buff*         skb=NULL;
-       struct amazon_atm_cell_header * cell_header;
-       u32 status;
-       int qid;
-       if (!data){
-               AMAZON_TPE_EMSG("data is NULL\n");
-               return;
-       }
-       qid = ((u8*)data)[AMAZON_AAL0_SDU];
-       status = ((u32*)data)[ATM_AAL0_SDU/4];
-       cell_header = (struct amazon_atm_cell_header *) data;
-       if (valid_qid(qid) != 1){
-               AMAZON_TPE_EMSG("error qid: %u\n",qid);
-               AMAZON_TPE_EMSG("unknown cells recieved\n");
-       }else if (qid == AMAZON_ATM_OAM_Q_ID){
-               //OAM or RM or OTHER cell
-               //Find real connection
-               
-#ifdef IKOS_MINI_BOOT  
-               //for OAM loop back test
-               dump_skb(56,(char *)data);
-               //kfree(data);  using g_oam_cell
-               return;
-#endif //IKOS_MINI_BOOT                                
-#ifdef TPE_LOOPBACK                                    
-               amz_push_oam(data);
-               return;
-#endif//TPE_LOOPBACK
-               int ret = 0;
-               ret = amazon_handle_oam_cell(data,cell_header->bit.vpi,cell_header->bit.vci,status);
-               if (ret == 0)
-                                       return;
-                               }else{
-               //should be normal AAL0 cells
-               // Get VCC
-               vcc = g_atm_dev.queues[qid].vcc;
-               if (vcc != NULL) {
-                       AMAZON_TPE_DMSG("push to upper layer\n");
-                       skb = dev_alloc_skb(AMAZON_AAL0_SDU);
-                       if (skb != NULL) {
-                               //skb->dev=vcc->dev;
-                               memcpy(skb_put(skb, AMAZON_AAL0_SDU), data, AMAZON_AAL0_SDU);
-                               skb->stamp = xtime;
-                               ATM_SKB(skb)->vcc = vcc;
-                               (*g_atm_dev.queues[qid].push)(vcc,skb,0);
-                       }else{
-                               AMAZON_TPE_EMSG(" No memory left for incoming AAL0 cell! Cell discarded!\n");
-                               //inform the upper layer
-                               (*g_atm_dev.queues[qid].push)(vcc,skb,-ENOMEM);
-                               atomic_inc(&vcc->stats->rx_drop);
-                       }
-               }else{
-                       AMAZON_TPE_EMSG("invalid qid %u\n",qid);
-               }
-       }
-       //kfree(data);  using g_oam_cell
-}
-
-/*
- *     Brief:          Interrupt handler for software cell extraction (done)
- *     Parameters:     irq     - CPPN for this interrupt
- *                     data    - Device ID for this interrupt
- *                     regs    - Register file
- *
- *     Description:
- *     When a software extraction is finished this interrupt is issued.
- *     It reads the cell data and sends it to the ATM stack.
- */
-void amazon_atm_swex_isr(int irq, void *data, struct pt_regs *regs)
-{
-       u32 * cell = NULL;
-       int i;
-       //ATM_AAL0 SDU + QID
-       AMAZON_TPE_DMSG("SWIE extraction done\n");
-       cell = (u32 *) g_oam_cell;
-       if (cell != NULL){
-               //convert to host byte order from big endian
-               for(i=0;i<ATM_AAL0_SDU;i+=4){
-                       cell[i/4]=readl(SWIE_ECELL_ADDR+i);     
-               }
-               cell[ATM_AAL0_SDU/4]= g_atm_dev.swie.sw;
-               ((u8*)cell)[AMAZON_AAL0_SDU] = g_atm_dev.swie.qid;
-#ifdef IKOS_MINI_BOOT
-       for(i=0;i<ATM_AAL0_SDU;i+=4){
-               AMAZON_TPE_DMSG("[%2x][%2x][%2x][%2x]\n",
-                       ((char*)cell)[i],
-                       ((char*)cell)[i+1],
-                       ((char*)cell)[i+2],
-                       ((char*)cell)[i+3]
-                       );
-       }
-       AMAZON_TPE_DMSG("qid: %u\n", ((u8*)cell)[AMAZON_AAL0_SDU]);
-       amazon_atm_swex_push((void *) cell);
-#else //not IKOS_MINI_BOOT
-       swex_complete_task.data = cell;
-       queue_task(&swex_complete_task,&tq_immediate);
-       mark_bh(IMMEDIATE_BH);
-#endif //not IKOS_MINI_BOOT
-       }else{
-               AMAZON_TPE_EMSG("no memory for receiving AAL0 cell\n");
-       }
-       
-       /* release the lock and check */
-       if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){
-               AMAZON_TPE_EMSG("swie lock is already released\n");
-       }
-       wake_up(&g_atm_dev.swie.sleep);
-}
-/*     Brief:          Interrupt handler for software cell insertion
- *
- *     Parameters:     irq     - CPPN for this interrupt
- *                     data    - Device ID for this interrupt
- *                     regs    - Register file
- *
- *     Description:
- *     When a software insertion is finished this interrupt is issued.
- *     The only purpose is to release the semaphore and read the status register.
- */
-void amazon_atm_swin_isr(int irq, void *data, struct pt_regs *regs)
-{
-       AMAZON_TPE_DMSG("SWIE insertion done\n");
-       /* release the lock and check */
-       if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){
-               AMAZON_TPE_EMSG("swie lock is already released");
-       }
-       // Release semaphore
-       up(&g_atm_dev.swie.in_sem);
-
-}
-/*     Brief:          Interrupt handler for software cell insertion & extraction
- *     Parameters:     irq     - CPPN for this interrupt
- *                     data    - Device ID for this interrupt
- *                     regs    - Register file
- *     Description:
- *     When a software insertion or extractionis finished this interrupt is issued.
- */
-void amazon_atm_swie_isr(int irq, void *data, struct pt_regs *regs)
-{
-       u32     status=0;
-       // Read status register
-       status = readl(SWIE_ISTAT_ADDR);
-       AMAZON_TPE_DMSG("insertion status: %8x\n", status);
-       if (status & SWIE_ISTAT_DONE){
-               //clear interrupt in peripheral and ICU
-               AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR);
-               mask_and_ack_amazon_irq(AMAZON_SWIE_INT);
-               
-               amazon_atm_swin_isr(irq,data,regs);
-       }
-       status = readl(SWIE_ESTAT_ADDR);
-       AMAZON_TPE_DMSG("extraction status: %8x\n", status);
-       if (status & SWIE_ESTAT_DONE){
-               //clear interrupt
-               AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR);
-               mask_and_ack_amazon_irq(AMAZON_SWIE_INT);
-               
-               amazon_atm_swex_isr(irq,data,regs);
-       }
-       //clear interrupt in ICU
-}
-/*
- *     Brief:          Insert ATM cell into CBM
- *     Parameters:     queue   - Target queue
- *                     cell    - Pointer to cell data
- *     Return Value:   EBUSY           - CBM is busy
- *                     0               - OK, cell inserted
- *     Description:
- *     This function inserts a cell into the CBM using the software insertion
- *     method. The format of the cell should be
- *     Little Endian (address starting from 0)
- *             H3, H2, H1, H0, P3, P2, P1, P0, P7, P6, P5, P4, ..., P47, P46, P45, P44
- *     Big Endian (address starting from 0)
- *             H0, H1, H2, H3, P0, P1, P2, P3, P4, P5, P6, P7, ..., P44, P45, P46, P47
- *     This function does not free memory!!!
- */
-int amazon_atm_swin(u8 queue, void* cell)
-{
-       u32     status=0;
-       int i;
-       // Read status register
-       status = readl(SWIE_ISTAT_ADDR);
-       AMAZON_TPE_DMSG(" SWIE status=0x%08x\n",status);
-
-       AMAZON_TPE_DMSG(" Inserting cell qid=%u\n",queue);
-       
-#ifdef AMAZON_CHECK_LINK
-       if (adsl_link_status == 0){
-               return -EFAULT; 
-       }
-#endif //AMAZON_CHECK_LINK
-
-       // Get semaphore (if possible)
-       if (down_interruptible(&g_atm_dev.swie.in_sem)) {
-               return -ERESTARTSYS;
-       }
-       /* try to set lock */
-       wait_event_interruptible(g_atm_dev.swie.sleep,(test_and_set_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0));
-       if (signal_pending(current)){
-               return -ERESTARTSYS; 
-       }
-
-       // Store cell in CBM memory
-       for(i=0;i<ATM_AAL0_SDU;i+=4){
-               AMAZON_WRITE_REGISTER_L(((u32*)cell)[i/4],SWIE_ICELL_ADDR+i);
-       }
-       //Store queue id
-       AMAZON_WRITE_REGISTER_L((u32) queue,SWIE_IQID_ADDR);
-
-       //Start SWIE
-       AMAZON_WRITE_REGISTER_L(SWIE_ICMD_START,SWIE_ICMD_ADDR);
-       
-       return 0;
-}
-
-#ifdef AMAZON_ATM_DEBUG
-/*
- *     Brief:          Interrupt handler for HTU
- *
- *     Parameters:     irq     - CPPN for this interrupt
- *                     data    - Device ID for this interrupt
- *                     regs    - Register file
- *
- */
-void amazon_atm_htu_isr(int irq, void *data, struct pt_regs *regs)
-{
-       u32     irq_stat=0;
-
-       // Read interrupt status register
-       irq_stat = readl(HTU_ISR0_ADDR);
-       AMAZON_TPE_DMSG("HTU status: %8x\n",irq_stat);
-       //Clear interrupt in CBM and ICU
-       AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_HTU_INT, HTU_SRC0_ADDR);
-       mask_and_ack_amazon_irq(AMAZON_HTU_INT);        
-       // Check if Any Cell Arrived
-       if (irq_stat & (HTU_ISR_NE | HTU_ISR_PNE) ) {
-               AMAZON_TPE_EMSG("INFNOENTRY %8x\n", readl(HTU_INFNOENTRY_ADDR));                
-       }else if (irq_stat & (HTU_ISR_TORD|HTU_ISR_PT)){
-               AMAZON_TPE_EMSG("Time Out %8x\n", readl(HTU_INFTIMEOUT_ADDR));
-       }else if (irq_stat & HTU_ISR_IT){
-               AMAZON_TPE_EMSG("Interrupt Test\n");
-       }else if (irq_stat & HTU_ISR_OTOC){
-               AMAZON_TPE_EMSG("Overflow of Time Out Counter\n");
-       }else if (irq_stat & HTU_ISR_ONEC){
-               AMAZON_TPE_EMSG("Overflow of No Entry Counter\n");
-       }else{
-               AMAZON_TPE_EMSG("unknown HTU interrupt occurs %8x\n", irq_stat);
-       }
-
-}
-#endif //AMAZON_ATM_DEBUG
-
-#ifdef AMAZON_TPE_TEST_AAL5_INT
-/*
- *     Brief:          Interrupt handler for AAL5
- *
- *     Parameters:     irq     - CPPN for this interrupt
- *                     data    - Device ID for this interrupt
- *                     regs    - Register file
- *
- */
-void amazon_atm_aal5_isr(int irq, void *data, struct pt_regs *regs)
-{
-       volatile u32 irq_stat=0;
-
-       // Read interrupt status register
-       irq_stat = readl(AAL5_SISR0_ADDR);
-       if (irq_stat){
-               AMAZON_TPE_EMSG("A5S status: %8x\n",irq_stat);
-               //Clear interrupt in CBM and ICU
-               AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_SSRC0_ADDR);
-               mask_and_ack_amazon_irq(AMAZON_AAL5_INT);       
-       }
-       irq_stat = readl(AAL5_RISR0_ADDR);
-       if (irq_stat){
-               AMAZON_TPE_EMSG("A5R status: %8x\n",irq_stat);
-               //Clear interrupt in CBM and ICU
-               AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_RSRC0_ADDR);
-               mask_and_ack_amazon_irq(AMAZON_AAL5_INT);       
-       }
-}
-#endif //AMAZON_TPE_TEST_AAL5_INT
-
-/*
- *     Brief:          Interrupt handler for CBM
- *
- *     Parameters:     irq     - CPPN for this interrupt
- *                     data    - Device ID for this interrupt
- *                     regs    - Register file
- *
- *     Description:
- *     This is the MIPS interrupt handler for the CBM. It processes incoming cells
- *     for SWIE queues.
- */
-void amazon_atm_cbm_isr(int irq, void *data, struct pt_regs *regs)
-{
-       u32     irq_stat=0;
-       u8 qid=0;
-
-       // Read interrupt status register
-       while ( (irq_stat = readl(CBM_INTINF0_ADDR))){
-               AMAZON_TPE_DMSG("CBM INT status: %8x\n",irq_stat);
-               //Clear interrupt in CBM and ICU
-               AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR);
-               qid = (u8) ((irq_stat & CBM_INTINF0_QID_MASK)>>CBM_INTINF0_QID_SHIFT);
-#ifdef AMAZON_TPE_SCR  
-               if (irq_stat & CBM_INTINF0_EF){
-                       amazon_atm_a5r((void*)qid);
-               }
-#endif
-               // Check if Any Cell Arrived
-               if (irq_stat & CBM_INTINF0_ACA) {
-                       amazon_atm_swex((void *)irq_stat);              
-               }
-               //TX AAL5 PDU discard
-               if (irq_stat & CBM_INTINF0_OPF){
-                       if ( (qid) < CBM_RX_OFFSET ){
-                               g_atm_dev.mib_counter.tx_drop++;
-                       }
-                       queue_statics(qid, QS_HW_DROP);
-               }
-               if (irq_stat & (CBM_INTINF0_ERR|CBM_INTINF0_Q0E|CBM_INTINF0_Q0I|CBM_INTINF0_RDE)){
-                       AMAZON_TPE_EMSG("CBM INT status: %8x\n",irq_stat);
-                       if (irq_stat & CBM_INTINF0_ERR){
-                               AMAZON_TPE_EMSG("CBM Error: FPI Bus Error\n");
-                       }
-                       if (irq_stat & CBM_INTINF0_Q0E){
-                               AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n");
-                       }
-                       if (irq_stat & CBM_INTINF0_Q0I){
-                               AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n");
-                       }
-                       if (irq_stat & CBM_INTINF0_RDE){
-                               AMAZON_TPE_EMSG("CBM Error: Read Empty Queue %u\n",qid);
-                               dump_qd(qid);
-                       }
-               }               
-       }
-       mask_and_ack_amazon_irq(AMAZON_CBM_INT);
-}
-
-/*     Brief:  check the status word after AAL SDU after reassembly
- */
-static inline void check_aal5_error(u8 stw0, u8 stw1, int qid)
-{
-       if (stw0 & AAL5_STW0_MFL){
-               AMAZON_TPE_DMSG("Maximum Frame Length\n");
-               g_atm_dev.queues[qid].aal5VccOverSizedSDUs++;
-       } 
-       if (stw0 & AAL5_STW0_CRC){
-               AMAZON_TPE_DMSG("CRC\n");
-               g_atm_dev.queues[qid].aal5VccCrcErrors++;
-       }
-#ifdef AMAZON_ATM_DEBUG_RX
-       AMAZON_TPE_EMSG("qid:%u stw0:%8x stw1:%8x\n",qid,stw0,stw1);
-#endif
-}
-
-/* Brief:      Process DMA rx data
- * Parameters:
-       dma_dev:        pointer to the dma_device_info, provided by us when register the dma device
- * Return:     no
- * Description: DMA interrupt handerl with OoS support. It is called when there is some data in rx direction.
- *
- */
-//507261:tc.chen void atm_process_dma_rx(struct dma_device_info* dma_dev)
-void __system atm_process_dma_rx(struct dma_device_info* dma_dev)
-{
-        u8 * head=NULL;
-        u32 length=0;
-        u8 stw0=0;
-        u8 stw1=0;
-
-       struct sk_buff * skb=NULL;
-       struct atm_vcc * vcc=NULL;
-       int qid=0;
-#ifdef AMAZON_ATM_DEBUG_RX
-       static int dma_rx_dump=0;
-       static u32 seq=0;
-       
-       seq++;
-       if (dma_rx_dump>0){
-               printk("\n=========================[%u]=========================\n",seq);
-       }
-#endif 
-       length=dma_device_read(dma_dev,&head,(void**)&skb);
-       AMAZON_TPE_DMSG("receive %8p[%u] from DMA\n", head,length);
-       if (head == NULL||length<=0) {
-               AMAZON_TPE_DMSG("dma_read null \n");
-               goto error_exit;
-       }
-
-       if (length > (g_atm_dev.aal5.rx_max_sdu+64)){
-               AMAZON_TPE_EMSG("received packet too large (%u)\n",length);
-               goto error_exit;
-       }
-       //check AAL5R trail for error and qid
-       //last byte is qid
-       length--;
-       qid = (int) head[length];
-       AMAZON_TPE_DMSG("head[%u] qid %u\n",length, qid);
-       //STW0 is always 4 bytes before qid
-       length -= 4;
-       stw0 = head[length]&0xff;
-       AMAZON_TPE_DMSG("head[%u] stw0 %8x\n",length, stw0);
-       //position of STW1 depends on the BE bits
-       length = length-4 + (stw0&AAL5_STW0_BE);
-       stw1 = head[length]&0xff;
-       AMAZON_TPE_DMSG("head[%u] stw1 %8x\n",length, stw1);    
-       if ( (stw0 & AAL5_STW0_MASK) || (stw1 & AAL5_STW1_MASK) ){
-               //AAL5 Error
-               check_aal5_error(stw0, stw1,qid);               
-               goto error_exit;
-       }
-       //make data pointers consistent
-       //UU + CPI
-       length -= 2;
-       AMAZON_TPE_DMSG("packet length %u\n", length);
-
-       //error: cannot restore the qid
-       if (valid_qid(qid) != 1){
-               AMAZON_TPE_EMSG("received frame in invalid qid %u!\n", qid);
-               goto error_exit;
-       }
-       vcc = g_atm_dev.queues[qid].vcc;
-       if (vcc == NULL){
-               AMAZON_TPE_EMSG("received frame in invalid vcc, qid=%u!\n",qid);
-               goto error_exit;
-       }
-       if (skb == NULL){
-               AMAZON_TPE_EMSG("cannot restore skb pointer!\n");
-               goto error_exit;
-       }
-       skb_put(skb,length);
-       skb->stamp = xtime;
-       g_atm_dev.queues[qid].access_time=xtime;
-       if ((*g_atm_dev.queues[qid].push)(vcc,skb,0)){
-               g_atm_dev.mib_counter.rx_drop++;
-               queue_statics(qid, QS_SW_DROP);                                 
-       }else{
-               g_atm_dev.mib_counter.rx++;
-               adsl_led_flash();//joelin adsl led
-               queue_statics(qid, QS_PKT);
-               AMAZON_TPE_DMSG("push successful!\n");
-       }
-#ifdef AMAZON_ATM_DEBUG_RX
-       if (dma_rx_dump>0){
-               printk("\nOK packet [dump=%u] length=%u\n",dma_rx_dump,length);
-               dump_skb(length+7, head);
-       }
-       if (dma_rx_dump >0) dma_rx_dump--;
-#endif 
-       return ;
-error_exit:
-#ifdef AMAZON_ATM_DEBUG_RX
-       if ( (head!=NULL) && (length >0)){
-               AMAZON_TPE_EMSG("length=%u\n",length);
-               dump_skb(length+5, head);
-       }       
-       dma_rx_dump++;
-#endif 
-       g_atm_dev.mib_counter.rx_err++;
-       queue_statics(qid, QS_ERR);
-       /*
-       if (vcc){
-               (*g_atm_dev.queues[qid].push)(vcc,skb,1);       
-       }
-       */
-       if (skb != NULL) {
-               dev_kfree_skb_any(skb);
-       }
-       return;
-}
-
-/*Brief:       ISR for DMA pseudo interrupt
- *Parameter:
-       dma_dev:        pointer to the dma_device_info, provided by us when register the dma device
-       intr_status:    
-               RCV_INT:                rx data available
-               TX_BUF_FULL_INT:        tx descriptor run out of
-               TRANSMIT_CPT_INT:       tx descriptor available again
- *Return:
-       0 for success???
- */
-//507261:tc.chen int amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status)
-int __system amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status)
-{
-       AMAZON_TPE_DMSG("status:%u\n",intr_status);
-       switch (intr_status) {
-               case RCV_INT:
-                       atm_process_dma_rx(dma_dev);
-                       break;
-               case TX_BUF_FULL_INT:
-                       //TX full: no descriptors
-                       atm_dma_full();
-                       break;
-               case TRANSMIT_CPT_INT:
-                       //TX free: at least one descriptor
-                       atm_dma_free();
-                       break;
-               default:
-                       AMAZON_TPE_EMSG("unknown status!\n");
-       }
-       return 0;
-}
-
-/*Brief:       free buffer for DMA tx
- *Parameter:
-       dataptr:        pointers to data buffer
-       opt:            optional parameter, used to convey struct skb pointer, passwd in dma_device_write
- *Return:
-       0 for success???
- *Description:
-       called by DMA module to release data buffer after DMA tx transaction
- *Error:
-       cannot restore skb pointer
- */
-int amazon_atm_free_tx(u8*dataptr, void* opt)
-{
-       struct sk_buff *skb;
-       if (opt){
-               AMAZON_TPE_DMSG("free skb%8p\n",opt);
-               skb = (struct sk_buff *)opt;
-               amazon_atm_free_tx_skb(skb);
-       }else{
-               AMAZON_TPE_EMSG("BUG: cannot restore skb pointer!\n");
-       }
-       return 0;
-}
-
-/*Brief:       allocate buffer & do alignment
- */
-inline struct sk_buff * amazon_atm_alloc_buffer(int len)
-{
-       struct sk_buff *skb;
-       skb = dev_alloc_skb(len+16);
-       if (skb){
-               //alignment requriements (4x32 bits (16 bytes) boundary)
-               alloc_align_16(skb);
-       }
-       return skb;
-}
-
-/*Brief:       allocate buffer for DMA rx
- *Parameter:
-       len: length
-       opt: optional data to convey the skb pointer, which will be returned to me in interrupt handler,
- *Return:
-       pointer to buffer, NULL means error?
- *Description:
-       must make sure byte alignment
- */
-       
-u8* amazon_atm_alloc_rx(int len, int* offset, void **opt)
-{
-       struct sk_buff *skb;
-       *offset = 0;
-       skb = amazon_atm_alloc_buffer(len);
-       if (skb){
-               AMAZON_TPE_DMSG("alloc skb->data:%8p len:%u\n",skb->data,len);
-               *(struct sk_buff**)opt = skb;
-       }else{
-               AMAZON_TPE_DMSG("no memory for receiving atm frame!\n");
-               return NULL;
-       }
-       return skb->data;
-}
-
-
-
-
-/* Brief:      Allocate kernel memory for sending a datagram.
- * Parameters
- *     vcc     virtual connection
- *     size    data buffer size
- * Return:
- *     NULL    fail
- *     sk_buff a pointer to a sk_buff
- * Description:
- *  This function can allocate our own additional memory for AAL5S inbound
- * header (8bytes). We have to replace the protocol default one (alloc_tx in /net/atm/common.c) 
- * when we open the device.
- * byte alignment is done is DMA driver.
- */
-struct sk_buff *amazon_atm_alloc_tx(struct atm_vcc *vcc,unsigned int size)
-{
-       struct sk_buff *skb;
-
-       if (!dma_may_send(DMA_TX_CH0)){
-               AMAZON_TPE_EMSG("no DMA descriptor available!\n");
-               return NULL;
-       }
-       //AAL5 inbound header space + alignment extra buffer
-       size+=8+AAL5S_INBOUND_HEADER;
-
-        if (atomic_read(&vcc->tx_inuse) && !atm_may_send(vcc,size)) {
-                AMAZON_TPE_EMSG("Sorry tx_inuse = %u, size = %u, sndbuf = %u\n",
-                    atomic_read(&vcc->tx_inuse),size,vcc->sk->sndbuf);
-                return NULL;
-        }
-
-        skb = amazon_atm_alloc_buffer(size);
-       if (skb == NULL){
-               AMAZON_TPE_EMSG("no memory\n");
-               return NULL;
-       }
-       AMAZON_TPE_DMSG("dev_alloc_skb(%u) = %x\n", skb->len, (u32)skb);
-        AMAZON_TPE_DMSG("tx_inuse %u += %u\n",atomic_read(&vcc->tx_inuse),skb->truesize);
-        atomic_add(skb->truesize+ATM_PDU_OVHD,&vcc->tx_inuse);
-
-       //reserve for AAL5 inbound header
-       skb_reserve(skb,AAL5S_INBOUND_HEADER);
-        return skb;
-}
-
-
-/* Brief:      change per queue QSB setting according to vcc qos parameters
- * Paramters:
- *     vcc:    atm_vcc pointer 
- *     qid:    CBM queue id (1~15)
- * Return:
-  */
-static inline void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, int qid)
-{
-       qsb_qptl_t      qptl;
-       qsb_qvpt_t      qvpt;
-       u32 tmp=0;
-       unsigned int qsb_clk;
-       
-       qsb_clk = amazon_get_fpi_hz()>>1;
-        
-       AMAZON_TPE_EMSG("Class=%u MAX_PCR=%u PCR=%u MIN_PCR=%u SCR=%u MBS=%u CDV=%u\n"
-               ,qos->txtp.traffic_class
-               ,qos->txtp.max_pcr
-               ,qos->txtp.pcr
-               ,qos->txtp.min_pcr
-               ,qos->txtp.scr
-               ,qos->txtp.mbs
-               ,qos->txtp.cdv
-               );
-       
-       // PCR limiter
-       if (qos->txtp.max_pcr == 0){    
-               qptl.bit.tprs = 0;                  /* 0 disables the PCR limiter */
-       }else {
-               // peak cell rate will be slightly lower than requested (maximum rate / pcr)= (qsbclock/2^3 * timestep/4)/pcr
-               tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.max_pcr ) + 1;
-               // check if an overfow occured
-               if (tmp > QSB_TP_TS_MAX) {
-                       AMAZON_TPE_EMSG("max_pcr is too small, max_pcr:%u tprs:%u\n",qos->txtp.max_pcr, tmp);
-                       qptl.bit.tprs = QSB_TP_TS_MAX;
-               }else{
-                       qptl.bit.tprs = tmp;
-               }
-       }
-       //WFQ
-       if (qos->txtp.traffic_class == ATM_CBR  || qos->txtp.traffic_class ==ATM_VBR_RT){
-               // real time queue gets weighted fair queueing bypass
-               qptl.bit.twfq  = 0;
-       }else if (qos->txtp.traffic_class ==ATM_VBR_NRT ||qos->txtp.traffic_class ==ATM_UBR_PLUS ){
-               // wfq calculation here are based on virtual cell rates, to reduce granularity for large rates
-               // wfq factor is maximum cell rate / garenteed cell rate.
-               //qptl.bit.twfq = g_atm_dev.qsb.min_cr * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr;
-               if (qos->txtp.min_pcr == 0) {
-                       AMAZON_TPE_EMSG("<warning> MIN_PCR should not be zero\n");
-                       qptl.bit.twfq = QSB_WFQ_NONUBR_MAX;
-               }else{
-                       tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr;             
-                       if (tmp == 0 ){
-                               qptl.bit.twfq = 1;
-                       }else if (tmp > QSB_WFQ_NONUBR_MAX){
-                               AMAZON_TPE_EMSG("min_pcr is too small, min_pcr:%u twfq:%u\n",qos->txtp.min_pcr, tmp);
-                               qptl.bit.twfq = QSB_WFQ_NONUBR_MAX;
-                       }else{
-                               qptl.bit.twfq = tmp;    
-                       }
-               }
-       }else if (qos->txtp.traffic_class == ATM_UBR){
-               // ubr bypass, twfq set to maximum value
-               qptl.bit.twfq = QSB_WFQ_UBR_BYPASS;
-       }else{
-               //tx is diabled, treated as UBR
-               AMAZON_TPE_EMSG("<warning> unsupported traffic class %u \n", qos->txtp.traffic_class);
-               qos->txtp.traffic_class = ATM_UBR;
-               qptl.bit.twfq = QSB_WFQ_UBR_BYPASS;
-       }
-       
-       //SCR Leaky Bucket Shaper VBR.0/VBR.1
-       if (qos->txtp.traffic_class ==ATM_VBR_RT || qos->txtp.traffic_class ==ATM_VBR_NRT){
-               if (qos->txtp.scr == 0){
-                       //SCR == 0 disable the shaper
-                       qvpt.bit.ts = 0;
-                       qvpt.bit.taus = 0;
-               }else{
-                       //CLP
-                       if (vcc->atm_options&ATM_ATMOPT_CLP){
-                               //CLP1
-                               qptl.bit.vbr = 1;
-                       }else{
-                               //CLP0
-                               qptl.bit.vbr = 0;
-                       }
-                       //TS and TauS
-                       tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.scr ) + 1;
-                       if (tmp > QSB_TP_TS_MAX) {
-                               AMAZON_TPE_EMSG("scr is too small, scr:%u ts:%u\n",qos->txtp.scr, tmp);
-                               qvpt.bit.ts = QSB_TP_TS_MAX;
-                       }else{
-                               qvpt.bit.ts = tmp;
-                       }
-                       tmp = (qos->txtp.mbs - 1)*(qvpt.bit.ts - qptl.bit.tprs)/64;
-                       if (tmp > QSB_TAUS_MAX){
-                               AMAZON_TPE_EMSG("mbs is too large, mbr:%u taus:%u\n",qos->txtp.mbs, tmp);
-                               qvpt.bit.taus = QSB_TAUS_MAX;
-                       }else if (tmp == 0){
-                               qvpt.bit.taus = 1;
-                       }else{
-                               qvpt.bit.taus = tmp;
-                       }
-               }
-       }else{
-               qvpt.w0 = 0;
-       }
-       //write the QSB Queue Parameter Table (QPT)
-       AMAZON_WRITE_REGISTER_L(QSB_QPT_SET_MASK,QSB_RTM_ADDR);
-       AMAZON_WRITE_REGISTER_L(qptl.w0, QSB_RTD_ADDR);
-       AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QPT<<QSB_TABLESEL_SHIFT)
-               | QSB_RAMAC_REG_LOW
-               | QSB_WRITE
-               | qid
-               ,QSB_RAMAC_ADDR);
-       //write the QSB Queue VBR Parameter Table (QVPT)
-       AMAZON_WRITE_REGISTER_L(QSB_QVPT_SET_MASK,QSB_RTM_ADDR);
-       AMAZON_WRITE_REGISTER_L(qvpt.w0, QSB_RTD_ADDR);
-       AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QVPT<<QSB_TABLESEL_SHIFT)
-               | QSB_RAMAC_REG_LOW
-               | QSB_WRITE
-               | qid
-               ,QSB_RAMAC_ADDR);       
-       AMAZON_TPE_EMSG("tprs:%u twfq:%u ts:%u taus:%u\n",qptl.bit.tprs,qptl.bit.twfq,qvpt.bit.ts,qvpt.bit.taus);
-}
-
-/* 
- * Brief:      create/change CBM queue descriptor
- * Parameter:  
- *     vcc:    atm_vcc pointer 
- *     qid:    CBM queue id (1~15)
- */
-static inline void set_qd(struct atm_vcc *vcc, u32 qid)
-{
-       u32 tx_config=0,rx_config=0;
-       u32 itf = (u32) vcc->itf;
-       u32 dma_qos=0;
-       u8 * qd_addr=NULL;
-               
-       tx_config|=CBM_QD_W3_WM_EN|CBM_QD_W3_CLPt;
-       //RT: check if the connection is a real time connection
-       if (vcc->qos.txtp.traffic_class == ATM_CBR || vcc->qos.txtp.traffic_class == ATM_VBR_RT){
-               tx_config|= CBM_QD_W3_RT;
-       }else{
-               tx_config|= CBM_QD_W3_AAL5; //don't set the AAL5 flag if it is a RT service
-       }
-       rx_config = tx_config;
-       
-       if(vcc->qos.aal == ATM_AAL5){   
-               //QoS: DMA QoS according to the traffic class
-               switch (vcc->qos.txtp.traffic_class){
-                       case ATM_CBR: dma_qos = CBR_DMA_QOS;break;
-                       case ATM_VBR_RT: dma_qos = VBR_RT_DMA_QOS;break;
-                       case ATM_VBR_NRT: dma_qos = VBR_NRT_DMA_QOS;break;
-                       case ATM_UBR_PLUS: dma_qos = UBR_PLUS_DMA_QOS;break;
-                       case ATM_UBR: dma_qos = UBR_DMA_QOS;break;
-               }
-       
-               //TX: upstream, AAL5(EPD or PPD), NOINT, SBid
-               tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK);
-               //RX: DMA QoS, downstream, no interrupt, AAL5(EPD, PPD), NO INT, HCR
-#ifdef AMAZON_TPE_SCR
-               rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_EOF;
-#else          
-               rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_NOINT|CBM_QD_W3_HCR;
-#endif         
-       }else {
-               //should be AAL0        
-               //upstream, NOINT, SBid
-               tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK);
-               //RX: downstream, ACA interrupt, 
-               rx_config |= CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_ACA;
-       }
-
-       //Threshold: maximum threshold for tx/rx queue, which is adjustable in steps of 64 cells
-       tx_config |=    ( (divide_by_64_round_up(tx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK;
-       rx_config |=    ( (divide_by_64_round_up(rx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK;
-       
-       qd_addr = (u8*) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
-       //TX
-       AMAZON_WRITE_REGISTER_L(tx_config, (qd_addr+qid*CBM_QD_SIZE + 0xc));
-       AMAZON_WRITE_REGISTER_L(0, (qd_addr+qid*CBM_QD_SIZE + 0x8));
-       //RX
-       AMAZON_WRITE_REGISTER_L(rx_config, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0xc));
-       AMAZON_WRITE_REGISTER_L(0, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0x8));
-}
-/*
- * Brief:      add HTU table entry
- * Parameter:  
- *     vpi.vci:
- *     qid:    CBM queue id (DEST is qid + CBM_RX_OFFSET)
- *     idx:    entry id (starting from zero to 14)
- * Return:
- *     0:      sucessful
- *     EIO:    HTU table entry cannot be written
- */
-
-inline int set_htu_entry(u8 vpi, u16 vci, u8 qid, u8 idx)
-{
-       int i = 0;
-       u32 tmp1=0;
-       while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < 1024) i++;
-       if (i > 1024)
-       {
-               AMAZON_TPE_EMSG("timeout\n");
-               return -EIO;
-       }
-       // write address register,
-       AMAZON_WRITE_REGISTER_L(idx, HTU_RAMADDR_ADDR);
-       // configure transmit queue
-       tmp1 = vpi<<24|vci<<8;
-       tmp1|=  HTU_RAMDAT1_VCON        // valid connection the entry is not validated here !!!!!!!!!!!!!!!!
-               |HTU_RAMDAT1_VCI3       // vci3 -> oam queue
-               |HTU_RAMDAT1_VCI4       // vci4 -> oam queue
-               |HTU_RAMDAT1_VCI6       // vci6 -> rm queue
-               |HTU_RAMDAT1_PTI4       // pti4 -> oam queue
-               |HTU_RAMDAT1_PTI5;      // pti5 -> oam queue
-
-       // ramdat 1 (in params & oam handling)
-       AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT1_ADDR);
-       // ramdat 2 (out params & oam handling)
-       tmp1 = ((qid+CBM_RX_OFFSET)&HTU_RAMDAT2_QID_MASK)
-               |HTU_RAMDAT2_PTI6
-               |HTU_RAMDAT2_PTI7
-               |HTU_RAMDAT2_F4U
-               |HTU_RAMDAT2_F5U
-               ;
-       AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT2_ADDR);
-       wmb();
-       // write HTU entry
-       AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR, HTU_RAMCMD_ADDR);
-       return 0;
-}
-/*
- * Brief:      add HTU table entry
- * Parameter:  
- *     vcc:    atm_vcc pointer
- *     qid:    CBM queue id
- * Return:
- *     0:      sucessful
- *     EIO:    HTU table entry cannot be written
- */
-inline static int set_htu(struct atm_vcc *vcc, u32 qid)
-{
-       return set_htu_entry(vcc->vpi, vcc->vci, qid, (qid - CBM_DEFAULT_Q_OFFSET));
-}
-
-/* 
- * Brief:      allocate a queue
- * Return:     
- *             <=0     no available queues
- *             >0      qid
- */
-static int atm_allocate_q(short itf)
-{
-       int i;
-       u32 tmp1=0;
-       int qid=0;
-       amazon_atm_port_t * dev;
-       dev = &g_atm_dev.ports[itf];
-       //find start queue id for this interface
-       for (i=0; i< itf; i++)
-       {
-               qid+= g_atm_dev.ports[i].max_conn;
-       }
-       // apply default queue offset ( oam, free cell queue, others, rm )
-       qid += CBM_DEFAULT_Q_OFFSET;
-       tmp1 = qid;
-       // search for a free queue
-       while ( (qid<tmp1+dev->max_conn)
-               && ( g_atm_dev.queues[qid].free != 1)) {
-               qid++;;
-       }
-       // if none was found, send failure message and return
-       if ( tmp1+dev->max_conn == qid)
-       {
-               return -EFAULT;
-       }
-       return qid;
-       
-}
-/* Brief:      open a aal5 or aal0 connection
- */
-static int atm_open(struct atm_vcc *vcc, push_back_t push)
-{
-       int err=0;
-       int qid=0;
-       amazon_atm_port_t * port = & g_atm_dev.ports[vcc->itf];
-       unsigned long flags;
-       /***************** check bandwidth ******************/
-       /* 511045:linmars change ATM_VBR_NRT to use scr instead of pcr */
-       if ((vcc->qos.txtp.traffic_class==ATM_CBR&&vcc->qos.txtp.max_pcr>port->tx_rem_cr)
-       ||(vcc->qos.txtp.traffic_class==ATM_VBR_RT&&vcc->qos.txtp.max_pcr>port->tx_rem_cr)
-       ||(vcc->qos.txtp.traffic_class==ATM_VBR_NRT&&vcc->qos.txtp.scr>port->tx_rem_cr) 
-       ||(vcc->qos.txtp.traffic_class==ATM_UBR_PLUS&&vcc->qos.txtp.min_pcr>port->tx_rem_cr)
-       ) {
-                AMAZON_TPE_EMSG("not enough bandwidth left (%u) cells per seconds \n",port->tx_rem_cr);
-                return -EINVAL;
-       }
-       if ( (qid = amazon_atm_find_vpivci(vcc->vpi, vcc->vci)) >0 ){
-               AMAZON_TPE_EMSG("vpi:%u vci:%u is alreay open on queue:%u\n", vcc->vpi, vcc->vci, qid);
-               return -EADDRINUSE;
-       }
-
-       /***************** allocate entry queueID for this port *****************/
-       if ( (qid=atm_allocate_q(vcc->itf)) <= 0){
-               AMAZON_TPE_EMSG("port: %u max:%u qid: %u\n", vcc->itf, port->max_conn, qid);
-               AMAZON_TPE_EMSG("no availabel connections for this port:%u\n",vcc->itf);
-               return -EINVAL;
-       }
-       /**************QSB parameters and CBM descriptors*************/
-       set_qsb(vcc, &vcc->qos, qid);
-       set_qd(vcc, qid);
-       mb();
-       err=set_htu(vcc,qid);
-       if (err){
-               AMAZON_TPE_EMSG("set htu entry fails %u\n",err);
-               return err;
-       }
-       /************set internal mapping*************/
-       local_irq_save(flags);
-       g_atm_dev.queues[qid].free = 0;
-       g_atm_dev.queues[qid].vcc = vcc;
-       g_atm_dev.queues[qid].push = push;
-       g_atm_dev.queues[qid+CBM_RX_OFFSET].free = 0;
-       g_atm_dev.queues[qid+CBM_RX_OFFSET].vcc = vcc;
-       g_atm_dev.queues[qid+CBM_RX_OFFSET].push = push;
-       /******************reserve bandwidth**********************/
-       if (vcc->qos.txtp.traffic_class == ATM_CBR){
-               //CBR, real time connection, reserve PCR
-               port->tx_cur_cr += vcc->qos.txtp.max_pcr;
-               port->tx_rem_cr -= vcc->qos.txtp.max_pcr;
-       }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){
-               //VBR_RT, real time connection, reserve PCR
-               port->tx_cur_cr += vcc->qos.txtp.max_pcr;
-               port->tx_rem_cr -= vcc->qos.txtp.max_pcr;
-       }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){
-               //VBR_NRT, reserve SCR
-               port->tx_cur_cr += vcc->qos.txtp.pcr;
-               port->tx_rem_cr -= vcc->qos.txtp.pcr;
-       }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){
-               //UBR_PLUS, reserve MCR
-               port->tx_cur_cr += vcc->qos.txtp.min_pcr;
-               port->tx_rem_cr -= vcc->qos.txtp.min_pcr;
-       }
-       local_irq_restore(flags);
-       return err;
-}
-/* Brief:      Open ATM connection
- * Parameters:         atm_vcc - Pointer to VCC data structure
- *             vpi     - VPI value for new connection
- *             vci     - VCI value for new connection
- *
- * Return:     0       - sucessful
- *             -ENOMEM - No memory available
- *             -EINVAL - No bandwidth/queue/ or unsupported AAL type
- * Description:
- *     This function opens an ATM connection on a specific device/interface
- *
- */
-int    amazon_atm_open(struct atm_vcc *vcc,push_back_t push)
-{
-       int err=0;
-
-       AMAZON_TPE_DMSG("vpi %u vci %u  itf %u aal %u\n"
-               ,vcc->vpi
-               ,vcc->vci
-               ,vcc->itf
-               ,vcc->qos.aal
-               );
-               
-       AMAZON_TPE_DMSG("tx cl %u bw %u mtu %u\n"
-               ,vcc->qos.txtp.traffic_class
-               ,vcc->qos.txtp.max_pcr
-               ,vcc->qos.txtp.max_sdu
-               );
-       AMAZON_TPE_DMSG("rx cl %u bw %u mtu %u\n"
-               ,vcc->qos.rxtp.traffic_class
-               ,vcc->qos.rxtp.max_pcr
-               ,vcc->qos.rxtp.max_sdu
-               );
-       if (vcc->qos.aal == ATM_AAL5 || vcc->qos.aal == ATM_AAL0){
-               err = atm_open(vcc,push);
-       }else{
-               AMAZON_TPE_EMSG("unsupported aal type %u\n", vcc->qos.aal);
-               err = -EPROTONOSUPPORT;
-       };
-       if (err == 0 ){
-               //replace the default memory allocation function with our own
-               vcc->alloc_tx = amazon_atm_alloc_tx;
-               set_bit(ATM_VF_READY,&vcc->flags);
-       }
-       return err;
-}
-
-/* Brief:      Send ATM OAM cell
- * Parameters:         atm_vcc - Pointer to VCC data structure
- *             skb     - Pointer to sk_buff structure, that contains the data
- * Return:     0               - sucessful
- *             -ENOMEM         - No memory available
- *             -EINVAL         - Not supported
- * Description:
- * This function sends a cell over and ATM connection
- * We always release the skb
- * TODO: flags handling (ATM_OF_IMMED, ATM_OF_INRATE)
- */
-int    amazon_atm_send_oam(struct atm_vcc *vcc, void * cell, int flags)
-{
-       int err=0;
-       int qid=0;
-       struct amazon_atm_cell_header * cell_header;
-       // Get cell header
-       cell_header = (struct amazon_atm_cell_header*) cell;
-       if ((cell_header->bit.pti == ATM_PTI_SEGF5) || (cell_header->bit.pti == ATM_PTI_E2EF5)) {
-               qid = amazon_atm_find_vpivci( cell_header->bit.vpi, cell_header->bit.vci);
-       }else if (cell_header->bit.vci == 0x3 || cell_header->bit.vci == 0x4) {
-               //507281:tc.chen qid = amazon_atm_find_vpi((int) cell_header->bit.vpi);
-               // 507281:tc.chen start
-               u8 f4_vpi;
-               f4_vpi = cell_header->bit.vpi;
-               qid = amazon_atm_find_vpi(f4_vpi );
-               // 507281:tc.chen end
-       }else{
-               //non-OAM cells, always invalid
-               qid = -EINVAL;
-       }
-       if (qid == -EINVAL) {
-               err =  -EINVAL;
-               AMAZON_TPE_EMSG("not valid AAL0 packet\n");
-       }else{
-               //send the cell using swie
-#ifdef TPE_LOOPBACK
-               err = amazon_atm_swin(AMAZON_ATM_OAM_Q_ID, cell);
-#else          
-               err = amazon_atm_swin(qid, cell);
-#endif
-       }
-       //kfree(cell);
-       return err;
-}
-
-/* Brief:      Send AAL5 frame through DMA
- * Parameters:         vpi     - virtual path id 
- *             vci     - virtual circuit id
- *             clp     - cell loss priority
- *             qid     - CBM queue to be sent to
- *             skb     - packet to be sent
- * Return:     0               - sucessful
- *             -ENOMEM         - No memory available
- *             -EINVAL         - Not supported
- * Description:
- * This function sends a AAL5 frame over and ATM connection
- *     1. make sure that the data is aligned to 4x32-bit boundary
- *     2. provide the inbound data (CPCS-UU and CPI, not used here)
- *     3. set CLPn
- *     4. send the frame by DMA
- *     5. release the buffer ???
- ** use our own allocation alloc_tx
- ** we make sure the alignment and additional memory
- *** we always release the skb
-
- */
-int amazon_atm_dma_tx(u8 vpi, u16 vci, u8 clp, u8 qid, struct sk_buff *skb) 
-{
-       int err=0,need_pop=1;
-       u32 * data=NULL;
-       int nwrite=0;
-       struct sk_buff *skb_tmp;
-       u32 len=skb->len;       
-
-       //AAL5S inbound header 8 bytes
-       if (skb->len > g_atm_dev.aal5.tx_max_sdu - AAL5S_INBOUND_HEADER) {
-               AMAZON_TPE_DMSG("tx_max_sdu:%u\n",g_atm_dev.aal5.tx_max_sdu); 
-               AMAZON_TPE_DMSG("skb too large [%u]!\n",skb->len);
-               err = -EMSGSIZE;
-               goto atm_dma_tx_error_exit;
-       }
-       
-       //Check the byte alignment requirement and header space
-       if ( ( ((u32)(skb->data)%16) !=AAL5S_INBOUND_HEADER)|| (skb_headroom(skb)<AAL5S_INBOUND_HEADER)){
-               //not aligned or no space for header, fall back to memcpy
-               skb_tmp = dev_alloc_skb(skb->len+16);
-               if (skb_tmp==NULL){
-                       err = - ENOMEM;                 
-                       goto atm_dma_tx_error_exit;     
-               }
-               alloc_align_16(skb_tmp);
-               g_atm_dev.aal5.cnt_cpy++;
-               skb_reserve(skb_tmp,AAL5S_INBOUND_HEADER);
-               memcpy(skb_put(skb_tmp,skb->len), skb->data, skb->len);
-               amazon_atm_free_tx_skb(skb);
-               need_pop=0;
-               skb = skb_tmp;
-       }
-       //Provide AAL5S inbound header
-       data = (u32 *)skb_push(skb,8);
-       data[0] = __be32_to_cpu(vpi<<20|vci<<4|clp);
-       data[1] = __be32_to_cpu(g_atm_dev.aal5.padding_byte<<8|qid);
-       
-       len = skb->len;
-
-       //send through DMA
-       AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[0]);
-       AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[1]);
-       AMAZON_TPE_DMSG("about to call dma_write len: %u\n", len);
-       nwrite=dma_device_write( &g_dma_dev,skb->data,len,skb);
-       if (nwrite != len) {
-               //DMA descriptors full
-//             AMAZON_TPE_EMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len);
-               AMAZON_TPE_DMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len);
-               err = -EAGAIN;
-               goto atm_dma_tx_drop_exit;
-       }
-       AMAZON_TPE_DMSG("just finish call dma_write\n");
-       //release in the "dma done" call-back
-       return 0;
-atm_dma_tx_error_exit:
-       g_atm_dev.mib_counter.tx_err++; 
-       queue_statics(qid, QS_ERR);
-       goto atm_dma_tx_exit;
-       
-atm_dma_tx_drop_exit:
-       g_atm_dev.mib_counter.tx_drop++;
-       queue_statics(qid, QS_SW_DROP);
-atm_dma_tx_exit:
-       if (need_pop){
-               amazon_atm_free_tx_skb(skb);
-       }else{
-               dev_kfree_skb_any(skb);
-       }
-       return err;
-}
-
-/* Brief:      Send AAL0/AAL5 packet
- * Parameters:         atm_vcc - Pointer to VCC data structure
- *             skb     - Pointer to sk_buff structure, that contains the data
- * Return:     0               - sucessful
- *             -ENOMEM         - No memory available
- *             -EINVAL         - Not supported
- * Description:
- *     See amazon_atm_dma_tx
- */
-int    amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb)
-{
-       int qid=0;
-       u8 clp=0;
-        int err=0;
-       u32 wm=0;
-
-       if (vcc == NULL || skb == NULL){
-               AMAZON_TPE_EMSG("invalid parameter\n");
-               return -EINVAL;
-       }
-       ATM_SKB(skb)->vcc = vcc;
-       qid = amazon_atm_get_queue(vcc);
-       if (valid_qid(qid) != 1) {
-               AMAZON_TPE_EMSG("invalid vcc!\n");
-               err = -EINVAL;
-               goto atm_send_err_exit;
-       }
-       
-       //Send AAL0 using SWIN
-       if (vcc->qos.aal == ATM_AAL0){
-#ifdef  TPE_LOOPBACK
-               err=amazon_atm_swin((qid+CBM_RX_OFFSET), skb->data);    
-#else
-               err=amazon_atm_swin(qid, skb->data);
-#endif
-               if (err){
-                       goto atm_send_err_exit;
-               }       
-               goto atm_send_exit;
-       }
-       
-       //Should be AAl5
-       //MIB counter
-       g_atm_dev.mib_counter.tx++;
-       adsl_led_flash();//joelin adsl led
-       queue_statics(qid, QS_PKT);
-
-#ifdef AMAZON_CHECK_LINK
-       //check adsl link 
-       if (adsl_link_status == 0){
-               //link down
-               AMAZON_TPE_DMSG("ADSL link down, discarded!\n");
-               err=-EFAULT;
-               goto atm_send_drop_exit;
-       }
-#endif
-       clp = (vcc->atm_options&ATM_ATMOPT_CLP)?1:0;
-       //check watermark first
-       wm = readl(CBM_WMSTAT0_ADDR);
-       if (  (wm & (1<<qid))
-           ||( (vcc->qos.txtp.traffic_class != ATM_CBR
-                &&vcc->qos.txtp.traffic_class != ATM_VBR_RT) 
-               &(wm & (CBM_WM_NRT_MASK | (clp&CBM_WM_CLP1_MASK)) ))){
-               //wm hit: discard
-               AMAZON_TPE_DMSG("watermark hit, discarded!\n");
-               err=-EFAULT;
-               goto atm_send_drop_exit;
-       }
-#ifdef  TPE_LOOPBACK
-       return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, (qid+CBM_RX_OFFSET),skb);
-#else  
-       return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, qid,skb);
-#endif
-
-atm_send_exit: 
-       amazon_atm_free_tx_skb_vcc(vcc,skb);    
-       return 0;
-       
-atm_send_drop_exit:
-       g_atm_dev.mib_counter.tx_drop++;
-       queue_statics(qid,QS_SW_DROP);
-atm_send_err_exit:     
-       amazon_atm_free_tx_skb_vcc(vcc,skb);
-       return err;
-}
-
-/* Brief:      Return ATM port related MIB
- * Parameter:  interface number
-        atm_cell_ifEntry_t
- */
-int amazon_atm_cell_mib(atm_cell_ifEntry_t* to,u32 itf)
-{
-       g_atm_dev.mib_counter.htu_unp += readl(HTU_MIBCIUP);
-       to->ifInUnknownProtos = g_atm_dev.mib_counter.htu_unp;
-#ifdef AMAZON_TPE_READ_ARC
-       u32 reg_val=0;
-       meiDebugRead((AR_CELL0_ADDR+itf*4),&reg_val,1);
-       g_atm_dev.mib_counter.rx_cells += reg_val;
-       reg_val=0;
-       meiDebugWrite((AR_CELL0_ADDR+itf*4),&reg_val,1);
-       to->ifHCInOctets_h = (g_atm_dev.mib_counter.rx_cells * 53)>>32;
-       to->ifHCInOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff;
-       
-       meiDebugRead((AT_CELL0_ADDR+itf*4),&reg_val,1);
-       g_atm_dev.mib_counter.tx_cells += reg_val;
-       reg_val=0;
-       meiDebugWrite((AT_CELL0_ADDR+itf*4),&reg_val,1);
-       to->ifHCOutOctets_h = (g_atm_dev.mib_counter.tx_cells * 53)>>32;
-       to->ifHCOutOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff;
-       
-       meiDebugRead((AR_CD_CNT0_ADDR+itf*4),&reg_val,1);
-       g_atm_dev.mib_counter.rx_err_cells += reg_val;
-       reg_val=0;
-       meiDebugWrite((AR_CD_CNT0_ADDR+itf*4),&reg_val,1);
-       to->ifInErrors = g_atm_dev.mib_counter.rx_err_cells;
-       
-       to->ifOutErrors = 0;
-#else
-       to->ifHCInOctets_h = 0;
-       to->ifHCInOctets_l = 0;
-       to->ifHCOutOctets_h = 0;
-       to->ifHCOutOctets_l = 0;
-       to->ifInErrors = 0;
-       to->ifOutErrors = 0;
-#endif
-       return 0;
-}
-
-/* Brief:      Return ATM AAL5 related MIB
- * Parameter:
-        atm_aal5_ifEntry_t
- */
-int amazon_atm_aal5_mib(atm_aal5_ifEntry_t* to)
-{
-       u32 reg_l,reg_h;
-       //AAL5R received Octets from ATM
-       reg_l = readl(AAL5_RIOL_ADDR);
-       reg_h = readl(AAL5_RIOM_ADDR);
-       g_atm_dev.mib_counter.rx_cnt_h +=reg_h;
-       if (reg_l + g_atm_dev.mib_counter.rx_cnt_l < reg_l){
-               g_atm_dev.mib_counter.rx_cnt_h++;
-       }
-       
-       g_atm_dev.mib_counter.rx_cnt_l+= reg_l;
-       //AAL5S sent Octets to ATM
-       reg_l = readl(AAL5_SOOL_ADDR);
-       reg_h = readl(AAL5_SOOM_ADDR);
-       g_atm_dev.mib_counter.tx_cnt_h +=reg_h;
-       if (reg_l + g_atm_dev.mib_counter.tx_cnt_l < reg_l){
-               g_atm_dev.mib_counter.tx_cnt_h++;
-       }
-       g_atm_dev.mib_counter.tx_cnt_l+= reg_l;
-
-
-       g_atm_dev.mib_counter.tx_ppd += readl(CBM_AAL5ODIS_ADDR);
-       g_atm_dev.mib_counter.rx_drop += readl(CBM_AAL5IDIS_ADDR);
-       
-       //store 
-       to->ifHCInOctets_h = g_atm_dev.mib_counter.rx_cnt_h;
-       to->ifHCInOctets_l = g_atm_dev.mib_counter.rx_cnt_l;
-       to->ifHCOutOctets_h = g_atm_dev.mib_counter.tx_cnt_h;
-       to->ifHCOutOctets_l = g_atm_dev.mib_counter.tx_cnt_l;
-       to->ifOutDiscards = g_atm_dev.mib_counter.tx_drop;
-       to->ifInDiscards = g_atm_dev.mib_counter.rx_drop;
-
-       //Software provided counters
-       //packets passed to higher layer
-       to->ifInUcastPkts = g_atm_dev.mib_counter.rx;
-       //packets passed from higher layer
-       to->ifOutUcastPkts = g_atm_dev.mib_counter.tx;
-       //number of wrong downstream packets
-       to->ifInErrors = g_atm_dev.mib_counter.rx_err;
-       //number of wrong upstream packets
-       to->ifOutErros = g_atm_dev.mib_counter.tx_err;
-
-       return 0;
-}
-/* Brief:      Return ATM AAL5 VCC related MIB from internale use
- * Parameter:
- *     qid
- *     atm_aal5_vcc_t
- */
-static int __amazon_atm_vcc_mib(int qid, atm_aal5_vcc_t* to)
-{
-       //aal5VccCrcErrors
-       to->aal5VccCrcErrors = g_atm_dev.queues[qid].aal5VccCrcErrors;
-       to->aal5VccOverSizedSDUs =g_atm_dev.queues[qid].aal5VccOverSizedSDUs;
-       to->aal5VccSarTimeOuts = 0; //not supported yet
-       return 0;
-}
-/* Brief:      Return ATM AAL5 VCC related MIB from vpi/vci
- * Parameter:  atm_vcc
- *      atm_aal5_vcc_t
- */
-int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to)
-{
-       int qid=0;
-       int err=0;
-       qid =  amazon_atm_find_vpivci(vpi, vci);
-       if (qid >0 ){
-               err = __amazon_atm_vcc_mib(qid,to);
-       }else{
-               return -EINVAL;
-       }
-       return err;
-}
-
-
-/* Brief:      Return ATM AAL5 VCC related MIB
- * Parameter:  atm_vcc
- *      atm_aal5_vcc_t
- */
-int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t* to)
-{
-       int qid=0;
-       int err=0;
-       qid =  amazon_atm_get_queue(vcc);
-       if (qid >0 ){
-               err = __amazon_atm_vcc_mib(qid,to);
-       }else{
-               return -EINVAL;
-       }
-       return err;
-}
-
-/* Brief:      Close ATM connection
- * Parameters:         atm_vcc - Pointer to VCC data structure
- * Return:     no
- * Description:
- * This function closes the given ATM connection
- */
-void   amazon_atm_close(struct atm_vcc *vcc){
-       int i;
-       int qid=0;
-       u32 tmp1;
-       u8 * qd_addr;
-       unsigned long flags;
-       if (vcc == NULL){
-               AMAZON_TPE_EMSG("invalid parameter. vcc is null\n");
-               return;
-       }
-       u32 itf = (u32) vcc->itf;
-       //release bandwidth
-       if (vcc->qos.txtp.traffic_class == ATM_CBR){
-               g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr;
-               g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr;
-       }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){
-               g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr;
-               g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr;
-       }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){
-               g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.pcr;
-               g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.pcr;
-       }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){
-               g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.min_pcr;
-               g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.min_pcr;
-       }
-
-       qid = amazon_atm_get_queue(vcc);
-       if (qid == -EINVAL){
-               AMAZON_TPE_EMSG("unknown vcc %u.%u.%u\n", vcc->itf, vcc->vpi, vcc->vci);
-               return;
-       }
-       local_irq_save(flags);
-       //Disable HTU entry
-       i=0;
-       while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < HTU_RAM_ACCESS_MAX) i++;
-       if (i == HTU_RAM_ACCESS_MAX){
-               AMAZON_TPE_EMSG("HTU RAM ACCESS out of time\n");
-       }
-
-       // write address register
-       AMAZON_WRITE_REGISTER_L(qid - CBM_DEFAULT_Q_OFFSET, HTU_RAMADDR_ADDR);
-       // invalidate the connection
-       AMAZON_WRITE_REGISTER_L(0, HTU_RAMDAT1_ADDR);
-       // write command
-       AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR,HTU_RAMCMD_ADDR);
-       
-       qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
-#ifdef AMAZON_ATM_DEBUG
-       tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x8) & 0xffff;
-       AMAZON_TPE_DMSG("TX queue has %u cells \n", tmp1);
-       tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x08)&0xffff;
-       AMAZON_TPE_DMSG("RX queue has %u cells \n", tmp1);
-#endif 
-       // set threshold of txqueue to 0
-       tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x0c);
-       tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK);
-       AMAZON_WRITE_REGISTER_L(tmp1, (qd_addr+qid*CBM_QD_SIZE+0x0c));
-       // set threshold of rxqueue to 0
-       tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c);
-       tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK);
-       AMAZON_WRITE_REGISTER_L(tmp1,(qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c));
-
-       //clear internal mapping
-       amazon_atm_clear_vcc(qid);
-       amazon_atm_clear_vcc(qid+CBM_RX_OFFSET);
-
-       local_irq_restore(flags);
-}
-
-
-/* Brief:      initialize internal data structure
- */
-static void atm_constructor(amazon_atm_dev_t * dev)
-{
-       int i;
-       memset(dev,0,sizeof(amazon_atm_dev_t));
-       atm_init_parameters(dev);
-       //internal: queue "free" flag
-       for(i=1;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
-               //dev->queues[i].vcc=NULL;
-               dev->queues[i].free = 1;
-       }
-       for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
-               dev->ports[i].tx_rem_cr = dev->ports[i].tx_max_cr;
-       }
-       //MIB
-       atomic_set(&dev->dma_tx_free_0,1); //initially there should be free descriptors
-}
-
-/* Brief:      return round up base-2 logarithm
- */
-static inline int get_log_2(u32 value)
-{
-       int i=0,j=1;
-       while (i<11){
-               if (j>=value) break;
-               j=j<<1;
-               i++;
-       }
-       AMAZON_TPE_DMSG("round up base-2 logarithm of %u is %u\n", value, i);
-       return i;
-}
-
-/* Brief:      TPE hardware initialization
- * Parameter:  specifiy the configurations of the hardware
- */
-static inline int atm_init_hard(amazon_atm_dev_t * dev)
-{
-       int i;
-       u32 tmp1, tmp2, tmp3;
-       u8 * mem_addr=NULL;
-       u8 * qd_addr=NULL;
-       //PMU power on the module 1st
-       *(AMAZON_PMU_PWDCR) =   (*AMAZON_PMU_PWDCR) | (AMAZON_PMU_PWDCR_TPE);
-       //Reset the module
-       *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_TPE);
-       mb();
-       mdelay(100);
-       *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~(AMAZON_RST_REQ_TPE));
-       mb();
-       
-       unsigned long qsb_clk = amazon_get_fpi_hz()>>1;
-       /*********allocate & arrange memory for CBM *********/
-       if (dev->cbm.mem_addr == NULL){
-               dev->cbm.allocated = 1;
-               mem_addr = (u8 *)__get_free_pages(GFP_KERNEL, get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1));
-               if (mem_addr != NULL){ 
-                       dev->cbm.mem_addr = mem_addr;
-               } else  {
-                       goto init_no_mem;
-               }
-       }
-       if (dev->cbm.qd_addr == NULL){
-#ifdef CONFIG_USE_VENUS
-               //to work around a bug, bit15 of QDOFF address should be 1,Aug4, 2004
-               //thus, we allocate 64k memory          
-               qd_addr = (u8 *)__get_free_pages(GFP_KERNEL, 4);
-               if (qd_addr != NULL) {
-                       dev->cbm.qd_addr_free = (u8*) (((unsigned long) qd_addr));
-                       dev->cbm.qd_addr = (u8*) (((unsigned long) qd_addr) | 0x8000);
-               }else{
-                       goto init_no_mem;
-               }
-#else  //CONFIG_USE_VENUS
-               qd_addr = (u8 *)kmalloc( CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM, GFP_KERNEL);
-               if (qd_addr != NULL) {
-                       dev->cbm.qd_addr = qd_addr;
-               }else {
-                       goto init_no_mem;
-               }
-#endif //CONFIG_USE_VENUS                      
-       }
-//#ifndef CONFIG_MIPS_UNCACHED
-       mem_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.mem_addr);
-       qd_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.qd_addr);
-//#endif
-       //CBM reset cell queue memory, 64 bytes / cell
-       memset_io(mem_addr, 0, CBM_CELL_SIZE * dev->cbm.free_cell_cnt);
-       //make a link list, last 4 bytes is pointer
-       for(i=1;i<dev->cbm.free_cell_cnt;i++){
-               AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * i)),(mem_addr + CBM_CELL_SIZE * (i-1) + 0x3c));
-       }
-       //reset queue descriptor
-       memset_io(qd_addr, 0, CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM);
-       //init word 0-2 of q0 (free cell list)
-       //address of last cell
-       AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * (dev->cbm.free_cell_cnt-1))), qd_addr);
-       //address of first cell
-       AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr)), (qd_addr + 4));
-       //no. of free cells
-       AMAZON_WRITE_REGISTER_L(dev->cbm.free_cell_cnt,(qd_addr + 8));
-       //init q descriptor for OAM receiving
-       AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (divide_by_64_round_up(oam_q_threshold)&0xff)<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c));
-//     AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (u32)oam_q_threshold<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c));
-       //config CBM
-       //set offset address and threshold
-       AMAZON_WRITE_REGISTER_L(CPHYSADDR(qd_addr), CBM_QDOFF_ADDR);
-       AMAZON_WRITE_REGISTER_L(((dev->cbm.nrt_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_NRTTHR_ADDR);
-       AMAZON_WRITE_REGISTER_L(((dev->cbm.clp0_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP0THR_ADDR);
-       AMAZON_WRITE_REGISTER_L(((dev->cbm.clp1_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP1THR_ADDR);
-       //config interrupts
-       AMAZON_WRITE_REGISTER_L( CBM_IMR_MASK & (~(CBM_IMR_ACA|CBM_IMR_Q0E|CBM_IMR_Q0I|CBM_IMR_RDE|CBM_IMR_OPF|CBM_IMR_ERR              
-#ifdef AMAZON_ATM_DEBUG        
-                                               |CBM_IMR_DISC|CBM_IMR_QFD|CBM_IMR_NFCA|CBM_IMR_CLP1TR|CBM_IMR_CLP0TR|CBM_IMR_NRTTR|CBM_IMR_QTR
-#endif 
-#ifdef AMAZON_TPE_SCR
-                                               |CBM_IMR_EF 
-#endif
-                                                       )), CBM_IMR0_ADDR);
-       AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR);
-       
-       //HTU
-       //RAM entry for number of possible connections per interface
-       tmp1 = dev->ports[0].max_conn?dev->ports[0].max_conn-1:0;
-       AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR);
-       for(i=1;i<AMAZON_ATM_PORT_NUM;i++){
-               tmp1+=dev->ports[i].max_conn;
-               AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR + 4 * i);
-       }
-       dev->cbm.max_q_off = tmp1+1;
-       //Queue ID for OAM/RM/Other cells
-       AMAZON_WRITE_REGISTER_L (AMAZON_ATM_OAM_Q_ID, HTU_DESTOAM_ADDR);
-       AMAZON_WRITE_REGISTER_L( AMAZON_ATM_RM_Q_ID, HTU_DESTRM_ADDR);
-       AMAZON_WRITE_REGISTER_L( AMAZON_ATM_OTHER_Q_ID, HTU_DESTOTHER_ADDR);
-       //Timeout
-       AMAZON_WRITE_REGISTER_L((u32) HTUTIMEOUT, HTU_TIMEOUT_ADDR);
-#ifdef AMAZON_ATM_DEBUG
-        AMAZON_WRITE_REGISTER_L((u32) HTU_ISR_MASK 
-                               &(~(HTU_ISR_NE|HTU_ISR_TORD|HTU_ISR_OTOC|HTU_ISR_ONEC|HTU_ISR_PNE|HTU_ISR_PT)), HTU_IMR0_ADDR);
-       AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS|SRC_SRE_ENABLE|AMAZON_HTU_INT,HTU_SRC0_ADDR);
-#endif
-       //QSB
-       //global setting, TstepC, SBL, Tau
-       //Tau
-       AMAZON_WRITE_REGISTER_L(dev->qsb.tau, QSB_TAU_ADDR);
-       //SBL
-       AMAZON_WRITE_REGISTER_L(dev->qsb.sbl, QSB_SBL_ADDR);
-       //tstep
-       AMAZON_WRITE_REGISTER_L(dev->qsb.tstepc>>1, QSB_CONFIG_ADDR);
-
-       //port settting
-       for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
-               if ( (dev->ports[i].enable) && (dev->ports[i].tx_max_cr!=0) ){
-                       tmp1 = ((qsb_clk * dev->qsb.tstepc) >>1) / dev->ports[i].tx_max_cr;
-                       tmp2 = tmp1 / 64;       //integer value of Tsb
-                       tmp3 = tmp1%64 + 1;     //fractional part of Tsb
-                       //carry over to integer part (?)
-                       if (tmp3 == 64) {
-                               tmp3 = 0;
-                               tmp2++;
-                       }
-                       if (tmp2 == 0){
-                               tmp2 = 1;
-                               tmp3 = 1;
-                       }
-                       //1. set mask 2. write value to data transfer register 3. start the transfer
-                       //SCT(FracRate)
-                       AMAZON_WRITE_REGISTER_L(QSB_SET_SCT_MASK, QSB_RTM_ADDR);
-                       AMAZON_WRITE_REGISTER_L(tmp3,QSB_RTD_ADDR);
-                       AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SCT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR);
-                       //SPT(SBV + PN + IntRage)
-                       AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_MASK, QSB_RTM_ADDR);
-                       AMAZON_WRITE_REGISTER_L(QSB_SPT_SBVALID|tmp2|(i<<16),QSB_RTD_ADDR);
-                       AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR);
-
-
-               }
-       }
-       
-       //SWIE: Setup Service Request Control Registers to enable interrupts
-       AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR);
-       AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR);
-
-       wmb();
-#ifdef AMAZON_TPE_TEST_AAL5_INT
-       AMAZON_WRITE_REGISTER_L(AAL5R_ISR_FE,AAL5_RIMR0_ADDR);
-       AMAZON_WRITE_REGISTER_L(0, AAL5_SIMR0_ADDR);
-       AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_SSRC0_ADDR);
-       AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_RSRC0_ADDR);
-#endif //AMAZON_TPE_TEST_AAL5_INT
-
-       AMAZON_WRITE_REGISTER_L(dev->aal5.tx_max_sdu,AAL5_SMFL_ADDR);   
-       AMAZON_WRITE_REGISTER_L(dev->aal5.rx_max_sdu,AAL5_RMFL_ADDR);
-       AMAZON_WRITE_REGISTER_L(AAL5_SCMD_MODE_POLL // enable polling mode
-                                       |AAL5_SCMD_SS
-                                       |AAL5_SCMD_AR
-                                       ,AAL5_SCMD_ADDR);
-       //start CBM
-       AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR);
-       wmb();
-       return 0;
-init_no_mem:
-       if (mem_addr != NULL) free_pages((unsigned long)mem_addr,get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1));
-       
-#ifdef CONFIG_USE_VENUS        
-       //to work around a bug, bit15 of QDOFF address should be 1
-       if (qd_addr != NULL) free_pages((unsigned long)qd_addr,4);
-#else //CONFIG_USE_VENUS
-       if (qd_addr != NULL) kfree(qd_addr);    
-#endif //CONFIG_USE_VENUS      
-       return -ENOMEM;
-}
-
-/*     
- *     Brief:  Create entry in /proc for status information
- */
-void atm_create_proc(void)
-{
-       create_proc_read_entry("amazon_atm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_ATM);
-        create_proc_read_entry("amazon_atm_mib", 0,NULL, amazon_atm_read_procmem,(void*)PROC_MIB);
-        create_proc_read_entry("amazon_atm_vcc", 0,NULL, amazon_atm_read_procmem,(void*)PROC_VCC);
-#if 0  
-       create_proc_read_entry("amazon_atm_aal5", 0,NULL, amazon_atm_read_procmem,(void*)PROC_AAL5);
-        create_proc_read_entry("amazon_atm_cbm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_CBM);
-        create_proc_read_entry("amazon_atm_htu", 0,NULL, amazon_atm_read_procmem,(void*)PROC_HTU);
-        create_proc_read_entry("amazon_atm_qsb", 0,NULL, amazon_atm_read_procmem,(void*)PROC_QSB);
-        create_proc_read_entry("amazon_atm_swie", 0,NULL, amazon_atm_read_procmem,(void*)PROC_SWIE);
-#endif
-}
-
-/*
- *     Brief:  Delete entry in /proc for status information
- */
-void atm_delete_proc(void)
-{
-       remove_proc_entry("amazon_atm", NULL);
-        remove_proc_entry("amazon_atm_mib", NULL);
-        remove_proc_entry("amazon_atm_vcc", NULL);
-#if 0  
-       remove_proc_entry("amazon_atm_aal5", NULL);
-        remove_proc_entry("amazon_atm_cbm", NULL);
-        remove_proc_entry("amazon_atm_htu", NULL);
-        remove_proc_entry("amazon_atm_qsb", NULL);
-        remove_proc_entry("amazon_atm_swie", NULL);
-#endif 
-}
-/* Brief:      Initialize ATM module
- * Parameters:         no
- * Return:     &g_atm_dev - sucessful
- *             NULL    - fails: 
- *                     1. invalid parameter
- *                     2. No memory available
- * Description:
- *  This function configure the TPE components according to the input info,
- *     -CBM
- *     -HTU
- *     -QSB
- *     -AAL5
- *
- */
-amazon_atm_dev_t * amazon_atm_create(void)
-{
-       int i;
-       AMAZON_TPE_DMSG("atm_init\n");
-       /************initialize global data structure****************/
-       atm_constructor(&g_atm_dev);
-       /***********allocate kernel resources****************/
-       //bottom halfs for SWEX
-       swex_start_task.routine = amazon_atm_swex;
-       swex_start_task.data = NULL;
-       swex_complete_task.routine = amazon_atm_swex_push;
-       swex_complete_task.data = NULL;
-#ifdef AMAZON_TPE_SCR
-       a5r_task.routine = amazon_atm_a5r;
-       a5r_task.data = NULL;
-#endif //AMAZON_TPE_SCR
-       //SWIN semaphore
-       sema_init(&(g_atm_dev.swie.in_sem), 1);
-       //SWIE lock
-       clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
-       //SWIE wait queue
-       init_waitqueue_head(&(g_atm_dev.swie.sleep));
-       atm_create_proc();
-               
-       //register DMA
-       memset(&g_dma_dev,0,sizeof(struct dma_device_info));
-       strcpy(g_dma_dev.device_name,"TPE");
-       g_dma_dev.weight=1; 
-       g_dma_dev.num_tx_chan=2;
-       g_dma_dev.num_rx_chan=2; 
-       g_dma_dev.ack=1;
-       g_dma_dev.tx_burst_len=4;
-       g_dma_dev.rx_burst_len=4;
-       //DMA TX
-
-       for(i=0;i<1;i++){
-               g_dma_dev.tx_chan[i].weight=QOS_DEFAULT_WGT;
-                       g_dma_dev.tx_chan[i].desc_num=10;
-                       g_dma_dev.tx_chan[i].packet_size=g_atm_dev.aal5.tx_max_sdu + AAL5S_INBOUND_HEADER;
-                       g_dma_dev.tx_chan[i].control=1;
-       }
-       //DMA RX
-       for(i=0;i<2;i++){
-                       g_dma_dev.rx_chan[i].weight=QOS_DEFAULT_WGT;
-               /* BingTao's suggestion, change from 5->10 will prevent packet loss in NO_TX_INT mode */
-               g_dma_dev.rx_chan[i].desc_num=10;
-               g_dma_dev.rx_chan[i].packet_size=(g_atm_dev.aal5.rx_max_sdu + AAL5R_TRAILER_LEN+0x10f)&(~0xf);
-               g_dma_dev.rx_chan[i].control=1;
-       }
-       g_dma_dev.intr_handler=amazon_atm_dma_handler;
-       g_dma_dev.buffer_alloc=amazon_atm_alloc_rx;
-       g_dma_dev.buffer_free=amazon_atm_free_tx;
-       dma_device_register(&g_dma_dev);
-/***********intialize the atm hardware ****************/
-       if ( atm_init_hard(&g_atm_dev) != 0){
-               return NULL;
-       }
-       //start CBM
-       AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR);
-       wmb();
-
-       //Start HTU
-       AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR);
-       wmb();
-
-
-       // Register interrupts for insertion and extraction
-       request_irq(AMAZON_SWIE_INT, amazon_atm_swie_isr, IRQF_DISABLED, "tpe_swie", NULL);
-       request_irq(AMAZON_CBM_INT, amazon_atm_cbm_isr, IRQF_DISABLED, "tpe_cbm", NULL);
-#ifdef AMAZON_ATM_DEBUG
-       request_irq(AMAZON_HTU_INT , amazon_atm_htu_isr, IRQF_DISABLED, "tpe_htu", NULL);
-#endif
-#ifdef AMAZON_TPE_TEST_AAL5_INT        
-       request_irq(AMAZON_AAL5_INT, amazon_atm_aal5_isr, IRQF_DISABLED, "tpe_aal5", NULL);
-#endif
-       return &g_atm_dev;
-}
-
-/* Brief:      clean up atm
- * Parameters:         no
- * Return:     no
- * Description:
- *  Disable the device.
- */
-void   amazon_atm_cleanup(void){
-       int i;
-       clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
-       wake_up(&g_atm_dev.swie.sleep);
-       up(&g_atm_dev.swie.in_sem);
-       // diable SWIE interrupts
-       AMAZON_WRITE_REGISTER_L(0, SWIE_ISRC_ADDR);
-       AMAZON_WRITE_REGISTER_L(0, SWIE_ESRC_ADDR);
-       wmb();
-
-       // Disable schedulers ( including interrupts )-----------------------
-       for (i = 0; i < AMAZON_ATM_PORT_NUM; i++);
-       {
-               AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_SBVALID_MASK, QSB_RTM_ADDR);
-               AMAZON_WRITE_REGISTER_L( 0 ,QSB_RTD_ADDR);
-               AMAZON_WRITE_REGISTER_L( (QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)
-                                               | QSB_RAMAC_REG_LOW
-                                               | QSB_WRITE
-                                               | i,
-                                               QSB_RAMAC_ADDR);
-       }
-       // disable QSB_Interrupts
-       AMAZON_WRITE_REGISTER_L( 0, QSB_IMR_ADDR);
-       AMAZON_WRITE_REGISTER_L( 0, QSB_SRC_ADDR);
-       // disable CBM interrupts
-       AMAZON_WRITE_REGISTER_L( 0      , CBM_IMR0_ADDR);
-       AMAZON_WRITE_REGISTER_L( 0 , CBM_SRC0_ADDR);
-       // set CBM start bit to 0
-       AMAZON_WRITE_REGISTER_L(0,CBM_CFG_ADDR);
-       // request hardware extraction of queue 0, wich should force the CBM
-       // to recognize that the start bit is not set
-       AMAZON_WRITE_REGISTER_L(CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
-       // write frame extraction command into the hw extract command register
-       AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
-       // disable htu
-       // disable all HTU interrupts
-       AMAZON_WRITE_REGISTER_L(0  ,HTU_IMR0_ADDR);
-       AMAZON_WRITE_REGISTER_L(0  ,HTU_SRC0_ADDR);
-       
-       if (g_atm_dev.cbm.allocated){
-               free_pages((unsigned long)g_atm_dev.cbm.mem_addr, get_log_2(((CBM_CELL_SIZE * g_atm_dev.cbm.free_cell_cnt) >>PAGE_SHIFT)+1));
-#ifdef CONFIG_USE_VENUS
-               //to work around a bug, bit15 of QDOFF address should be 1
-               free_pages((unsigned long)g_atm_dev.cbm.qd_addr_free,4);
-#else //CONFIG_USE_VENUS
-               kfree(g_atm_dev.cbm.qd_addr);
-#endif //CONFIG_USE_VENUS                                              
-       }
-       atm_delete_proc();
-       // free interrupts for insertion and extraction
-       dma_device_unregister(&g_dma_dev);
-       free_irq(AMAZON_SWIE_INT, NULL);
-       free_irq(AMAZON_CBM_INT, NULL);
-#ifdef AMAZON_ATM_DEBUG
-       free_irq(AMAZON_HTU_INT, NULL);
-#endif
-#ifdef AMAZON_TPE_TEST_AAL5_INT
-       free_irq(AMAZON_AAL5_INT, NULL);
-#endif
-
-}
-
-/************************ ATM network interface ***********************************************/
-/*     Brief:          getsockopt
- */
-int amazon_atm_getsockopt(struct atm_vcc *vcc, int level, int optname, char *optval, int optlen)
-{
-       int err=0;
-       atm_aal5_vcc_t mib_vcc;
-       AMAZON_TPE_DMSG("1\n");
-       switch (optname){
-               case    SO_AMAZON_ATM_MIB_VCC:
-                       AMAZON_TPE_DMSG("2\n");
-                       err = amazon_atm_vcc_mib(vcc, &mib_vcc);
-                       AMAZON_TPE_DMSG("%u\n",mib_vcc.aal5VccCrcErrors);
-                        err = copy_to_user((void *)optval,&mib_vcc, sizeof(mib_vcc));
-                        AMAZON_TPE_DMSG("err %u\n",err);
-                        break;
-                default:
-                       return -EFAULT;
-       }
-       return err;
-}
-
-/*     Brief:          IOCTL
- */
-
-int amazon_atm_ioctl(struct atm_dev *dev,unsigned int cmd,void *arg)
-{
-       int     err=0;
-       //MIB
-       atm_cell_ifEntry_t mib_cell;
-       atm_aal5_ifEntry_t mib_aal5;
-       atm_aal5_vcc_x_t mib_vcc;
-       if (_IOC_TYPE(cmd) != AMAZON_ATM_IOC_MAGIC) return -ENOTTY;
-       if (_IOC_NR(cmd) > AMAZON_ATM_IOC_MAXNR) return -ENOTTY;
-
-       if (_IOC_DIR(cmd) & _IOC_READ)
-               err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd));
-       else if (_IOC_DIR(cmd) & _IOC_WRITE)
-               err =  !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd));
-       if (err) {
-               AMAZON_TPE_EMSG("acess verification fails \n");
-               return -EFAULT;
-       }
-       switch(cmd) {
-               case AMAZON_ATM_MIB_CELL:
-                       err = amazon_atm_cell_mib(&mib_cell,(u32)arg);
-                       if (err==0){
-                               err = __copy_to_user((void *)arg,&mib_cell,sizeof(mib_cell));
-                       }else{
-                               AMAZON_TPE_EMSG("cannot get MIB ATM_CELL\n");
-                       }
-                       break;
-               case AMAZON_ATM_MIB_AAL5:
-                       err = amazon_atm_aal5_mib(&mib_aal5);
-                       if (err==0){
-                               err=__copy_to_user(arg, &mib_aal5, sizeof(mib_aal5));
-                       }else{
-                               AMAZON_TPE_EMSG("cannot get MIB ATM_AAL5\n");
-                       }
-                       break;
-               case AMAZON_ATM_MIB_VCC:
-                       err=__copy_from_user(&mib_vcc,arg, sizeof(mib_vcc));
-                       AMAZON_TPE_DMSG("return of copy_from_user %x\n",err);
-                       err = amazon_atm_vcc_mib_x(mib_vcc.vpi, mib_vcc.vci, &(mib_vcc.mib_vcc));
-                       if (err==0){
-                               err=__copy_to_user(arg, &mib_vcc, sizeof(mib_vcc));     
-                       }else{
-                               AMAZON_TPE_EMSG("cannot get MIB ATM_VCC\n");
-                       }
-                               
-               default:
-                       return -ENOTTY;
-       }
-       return err;
-}
-/*     Brief:  return a link list of OAM related time stamp info
- *     Parameter:      none
- *     Return: 
-               a link list of "struct oam_last_activity" data
- *     Description:
-               Each time, a F4/F5 cell or AAL5 packet is received, the time stamp is updated.
-               Through this call, u get a list of this time stamp for all active connection.
-               Please note that u have read-only access.
- */
-const struct oam_last_activity* get_oam_time_stamp()
-{
-       int i,j;
-       for(i=CBM_DEFAULT_Q_OFFSET+CBM_RX_OFFSET,j=0;i<CBM_RX_OFFSET+CBM_DEFAULT_Q_OFFSET+AMAZON_ATM_MAX_VCC_NUM;i++){
-               if (g_atm_dev.queues[i].free != 1 && g_atm_dev.queues[i].vcc != NULL){
-                       //active connection
-                       if (j !=0 ){
-                               g_oam_time_stamp[j-1].next = &g_oam_time_stamp[j];
-                       }
-                       g_oam_time_stamp[j].vpi = g_atm_dev.queues[i].vcc->vpi;
-                       g_oam_time_stamp[j].vci = g_atm_dev.queues[i].vcc->vci;
-                       g_oam_time_stamp[j].stamp = g_atm_dev.queues[i].access_time;
-                       g_oam_time_stamp[j].next = NULL;
-                       j++;
-               }
-       }
-       if (j==0) {
-               return NULL;
-       }else{
-               return g_oam_time_stamp;
-       }
-}
-
-
-/*     Brief:  call back routine for rx
- *     Parameter:
- *             vcc atm_vcc pointer
- *             skb     data if no error
-               err     error flag, 0: no error, 1:error
- *     Return: 
- *             0       
- *             <>0     cannot push up
- *     Description:
- *             release the packet if cannot push up
- */
-static int amazon_atm_net_push(struct atm_vcc *vcc,struct sk_buff *skb, int err)
-{
-       if (err){
-               if (vcc && vcc->stats) {
-                       atomic_inc(&vcc->stats->rx_err);
-               }
-       }else{  
-               ATM_SKB(skb)->vcc = vcc;
-       
-               if (!atm_charge(vcc, skb->truesize)){
-                       //no space this vcc
-                       AMAZON_TPE_EMSG("no space for this vcc\n");
-                       dev_kfree_skb_any(skb);
-                       return -ENOMEM;
-               }
-               atomic_inc(&vcc->stats->rx);
-               AMAZON_TPE_DMSG("push to vcc\n");
-               vcc->push(vcc,skb);
-       }
-       return 0;
-}
-int    amazon_atm_net_send_oam(struct atm_vcc*vcc, void *cell, int flags)
-{
-       return amazon_atm_send_oam(vcc,cell,flags);
-}
-
-int    amazon_atm_net_send(struct atm_vcc *vcc,struct sk_buff *skb)
-{
-       int err=0;
-       if (vcc->qos.aal == ATM_AAL0 || vcc->qos.aal == ATM_AAL5) {
-               err=amazon_atm_send(vcc,skb);
-       }else{
-               //not supported
-               err =  -EPROTONOSUPPORT;
-       }
-       if (err){
-               atomic_inc(&vcc->stats->tx_err);
-       }else{
-               atomic_inc(&vcc->stats->tx);
-       }
-       AMAZON_TPE_DMSG("sent, tx_inuse:%u\n", atomic_read(&vcc->tx_inuse));
-       return err;
-}
-
-int    amazon_atm_net_open(struct atm_vcc *vcc,short vpi, int vci)
-{
-       vcc->itf = (int)  vcc->dev->dev_data;
-       vcc->vpi = vpi;
-       vcc->vci = vci;
-       return(amazon_atm_open(vcc,amazon_atm_net_push));
-}
-
-static int amazon_atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flgs)
-{
-       int qid;
-       
-       if (vcc == NULL || qos == NULL){
-               AMAZON_TPE_EMSG("invalid parameters\n");
-               return -EINVAL;
-       }
-       qid = amazon_atm_get_queue(vcc);
-       if (valid_qid(qid) != 1) {
-               AMAZON_TPE_EMSG("no vcc connection opened\n");
-               return -EINVAL;
-       }
-       set_qsb(vcc,qos,qid);
-       return 0;
-}
-
-static struct atmdev_ops amazon_atm_ops = {
-   open:       amazon_atm_net_open,
-   close:      amazon_atm_close,
-   ioctl:      amazon_atm_ioctl,
-   send:       amazon_atm_net_send,
-   send_oam:   amazon_atm_net_send_oam,
-//   getsockopt:       amazon_atm_getsockopt,
-   change_qos: amazon_atm_change_qos,
-//   proc_read:        amazon_atm_proc_read,
-   owner:      THIS_MODULE,
-};                             // ATM device callback functions
-
-/*
- * brief "/proc" function
- */
-int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data)
-{
-       int buf_off=0;  /* for buf */
-       int i=0,j=0;
-       int type= (u32)data;//which module
-       atm_aal5_ifEntry_t mib_aal5;
-       atm_cell_ifEntry_t mib_cell;
-       atm_aal5_vcc_t mib_vcc;
-       switch(type){
-               case PROC_MIB:
-                       //MIB counter
-                       amazon_atm_aal5_mib(&mib_aal5);
-                       //TX:
-                       buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Upstream =========\n");
-                       buf_off+=sprintf(buf+buf_off,"received %u (pkts) from upper layer\n", mib_aal5.ifOutUcastPkts);
-                       buf_off+=sprintf(buf+buf_off,"errors: %u (pkts)\n",mib_aal5.ifOutErros);
-                       buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n", mib_aal5.ifOutDiscards);
-                       buf_off+=sprintf(buf+buf_off,"transmitted: %x-%x (bytes) \n",
-                                       mib_aal5.ifHCOutOctets_h, mib_aal5.ifHCOutOctets_l);
-                       //RX:
-                       buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Downstream =========\n");
-                       buf_off+=sprintf(buf+buf_off,"received %x-%x (bytes)\n",
-                                       mib_aal5.ifHCInOctets_h,mib_aal5.ifHCInOctets_l);
-                       buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n",mib_aal5.ifInDiscards);
-                       buf_off+=sprintf(buf+buf_off,"errors: %u (ptks)\n",mib_aal5.ifInErrors);
-                       buf_off+=sprintf(buf+buf_off,"passed %u (ptks) to upper layer\n",mib_aal5.ifInUcastPkts);
-                       
-                       //Cell level
-                       buf_off+=sprintf(buf+buf_off,"\n============= ATM Cell =========\n");
-                       amazon_atm_cell_mib(&mib_cell,0);
-#ifdef AMAZON_TPE_READ_ARC                     
-                       buf_off+=sprintf(buf+buf_off,"Port 0: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l);
-                       buf_off+=sprintf(buf+buf_off,"Port 0: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l);
-                       buf_off+=sprintf(buf+buf_off,"Port 0: downstream errors: %u (cells)\n",mib_cell.ifInErrors);
-                       amazon_atm_cell_mib(&mib_cell,1);
-                       buf_off+=sprintf(buf+buf_off,"Port 1: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l);
-                       buf_off+=sprintf(buf+buf_off,"Port 1: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l);
-                       buf_off+=sprintf(buf+buf_off,"Port 1: downstream errors: %u (cells)\n",mib_cell.ifInErrors);
-#endif
-                       buf_off+=sprintf(buf+buf_off,"HTU discards: %u (cells)\n",mib_cell.ifInUnknownProtos);
-                       
-                       buf_off+=sprintf(buf+buf_off,"\n====== Specials =====\n");
-                       buf_off+=sprintf(buf+buf_off,"AAL5S PPD: %u (cells)\n",g_atm_dev.mib_counter.tx_ppd);
-#ifdef AMAZON_TPE_SCR
-                       buf_off+=sprintf(buf+buf_off,"Reassembly wait: %u \n",g_a5r_wait);
-#endif
-                       break;
-               case PROC_ATM:
-                       //Interface (Port)
-                       buf_off+=sprintf(buf+buf_off,"[Interfaces]\n");
-                       for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
-                               if (g_atm_dev.ports[i].enable==0){
-                                       buf_off+=sprintf(buf+buf_off,"\tport[%u] not in use\n",i);
-                               }else{
-                                       buf_off+=sprintf(buf+buf_off,"\tport[%u]\n\t\tmax_conn=%u\n"
-                                                                       ,i
-                                                                       ,g_atm_dev.ports[i].max_conn
-                                                                       );
-                                       buf_off+=sprintf(buf+buf_off,"\t\ttx_max=%u\n\t\trem=%u\n\t\tcur=%u\n"
-                                                                       ,g_atm_dev.ports[i].tx_max_cr
-                                                                       ,g_atm_dev.ports[i].tx_rem_cr
-                                                                       ,g_atm_dev.ports[i].tx_cur_cr
-                                                                       );
-                               }
-
-                       }
-                       //Units Info
-                       //AAL5
-                       buf_off+=sprintf(buf+buf_off,"[AAL5]\n\tpad=%c(%x)\n\trx_mtu=%u\n\ttx_mtu=%u\n"
-                                       ,g_atm_dev.aal5.padding_byte
-                                       ,g_atm_dev.aal5.padding_byte
-                                       ,g_atm_dev.aal5.rx_max_sdu
-                                       ,g_atm_dev.aal5.tx_max_sdu
-                                       );
-                       //CBM
-                       buf_off+=sprintf(buf+buf_off,
-                               "[CBM]\n\tnrt_thr=%u\n\tclp0_thr=%u\n\tclp1_thr=%u\n\ttx_q_threshold=%u\n\trx_q_threshold=%u\n\toam_q_threshold=%u\n\tfree_cell_cnt=%u\n"
-                                       ,g_atm_dev.cbm.nrt_thr
-                                       ,g_atm_dev.cbm.clp0_thr
-                                       ,g_atm_dev.cbm.clp1_thr
-                                       ,tx_q_threshold
-                                       ,rx_q_threshold
-                                       ,oam_q_threshold
-                                       ,g_atm_dev.cbm.free_cell_cnt
-                                       );
-                       //QSB
-                       buf_off+=sprintf(buf+buf_off,"[QSB]\n\ttau=%u\n\ttstepc=%u\n\tsbl=%u\n"
-                                       ,g_atm_dev.qsb.tau
-                                       ,g_atm_dev.qsb.tstepc
-                                       ,g_atm_dev.qsb.sbl
-                                       );
-                       buf_off+=sprintf(buf+buf_off,"[Debugging]\n\taal5_need_copy=%u\n",g_atm_dev.aal5.cnt_cpy);
-                       break;
-               case PROC_VCC:
-                       for(i=CBM_DEFAULT_Q_OFFSET,j=0;i<g_atm_dev.cbm.max_q_off+CBM_DEFAULT_Q_OFFSET;i++){
-                               if (g_atm_dev.queues[i].free!=1){
-                                       buf_off+=sprintf(buf+buf_off,"vcc[%u]\n\tvpi=%u vci=%u itf=%u qid=%u access_time=%u.%u\n"
-                                                                       ,j++
-                                                                       ,g_atm_dev.queues[i].vcc->vpi
-                                                                       ,g_atm_dev.queues[i].vcc->vci
-                                                                       ,g_atm_dev.queues[i].vcc->itf
-                                                                       ,i
-                                                                       ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_sec
-                                                                       ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_usec
-                                                                       );
-                                       buf_off+=sprintf(buf+buf_off,"\tqos_tx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n"
-                                                                       ,g_atm_dev.queues[i].vcc->qos.txtp.traffic_class
-                                                                       ,g_atm_dev.queues[i].vcc->qos.txtp.max_pcr
-                                                                       ,g_atm_dev.queues[i].vcc->qos.txtp.pcr
-                                                                       ,g_atm_dev.queues[i].vcc->qos.txtp.min_pcr
-                                                                       ,g_atm_dev.queues[i].vcc->qos.txtp.scr
-                                                                       ,g_atm_dev.queues[i].vcc->qos.txtp.mbs
-                                                                       ,g_atm_dev.queues[i].vcc->qos.txtp.cdv
-                                                                       );
-                                       buf_off+=sprintf(buf+buf_off,"\tqos_rx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n"
-                                                                       ,g_atm_dev.queues[i].vcc->qos.rxtp.traffic_class
-                                                                       ,g_atm_dev.queues[i].vcc->qos.rxtp.max_pcr
-                                                                       ,g_atm_dev.queues[i].vcc->qos.rxtp.pcr
-                                                                       ,g_atm_dev.queues[i].vcc->qos.rxtp.min_pcr
-                                                                       ,g_atm_dev.queues[i].vcc->qos.rxtp.scr
-                                                                       ,g_atm_dev.queues[i].vcc->qos.rxtp.mbs
-                                                                       ,g_atm_dev.queues[i].vcc->qos.rxtp.cdv
-                                                                       );
-                                       __amazon_atm_vcc_mib((i+CBM_RX_OFFSET),&mib_vcc);
-                                       buf_off+=sprintf(buf+buf_off,"\tCRC error=%u\n", mib_vcc.aal5VccCrcErrors);
-                                       buf_off+=sprintf(buf+buf_off,"\toversized packet=%u\n", mib_vcc.aal5VccOverSizedSDUs);
-#ifdef         AMAZON_ATM_DEBUG
-                                       if ( valid_qid(i+CBM_RX_OFFSET)){
-                                       buf_off+=sprintf(buf+buf_off,"\tdownstream statics\n" );
-                                       buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_PKT]);
-                                       buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_ERR] );
-                                       buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_SW_DROP] );
-                                       }
-
-                                       buf_off+=sprintf(buf+buf_off,"\tupstream statics\n" );
-                                       buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i].qs[QS_PKT]);
-                                       buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i].qs[QS_ERR] );
-                                       buf_off+=sprintf(buf+buf_off,"\t\thw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_HW_DROP] );
-                                       buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_SW_DROP] );
-
-#endif                                 
-       
-                               }
-
-                       }
-                       break;
-               default:
-                       break;
-       }
-       if(buf_off>0)   *eof = 1;
-       return buf_off;
-}
-
-#ifdef AMAZON_TPE_AAL5_RECOVERY
-extern int (*tpe_reset)(void);
-extern int (*tpe_start)(void);
-extern int (*tpe_inject)(void);
-/*     Brief:          Reset TPE hardware
- *     Description
- *             This is a wordaround for AAL5 bug. It tries to reset TPE.
- *      take care of software
- *      setup all previous connection
- */
-int amazon_tpe_reset(void)
-{
-       struct atm_vcc * vcc;   
-       int err=0;
-       int i;
-       u8 * qd_addr;
-       u32 reg_l, reg_h;
-       unsigned int a_cfg_value=0;
-       unsigned int a_cfg_old_value=0;
-       atm_aal5_ifEntry_t mib_aal5;
-       atm_cell_ifEntry_t mib_cell;
-       
-       //make sure all cells transmitting out first
-       //Segmentation done
-       amazon_atm_aal5_mib(&mib_aal5);
-       reg_l = g_atm_dev.mib_counter.tx_cnt_l;
-       reg_h = g_atm_dev.mib_counter.tx_cnt_h;
-       while(1){
-               mdelay(10);
-               amazon_atm_aal5_mib(&mib_aal5);
-               if( (reg_l == g_atm_dev.mib_counter.tx_cnt_l) && (reg_h == g_atm_dev.mib_counter.tx_cnt_h) ){
-                       break;
-               }
-               AMAZON_TPE_DMSG("AAL5 Segmentation still in progress!\n");
-               reg_l = g_atm_dev.mib_counter.tx_cnt_l;
-               reg_h = g_atm_dev.mib_counter.tx_cnt_h;
-       }
-       //QSB done
-       qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
-       for (i=1;i<15;i++){
-               while ( (err=readl(qd_addr+i*CBM_QD_SIZE+0x8)&0xffff) !=0  ){
-                       mdelay(20);
-                       AMAZON_TPE_DMSG("queue %u not empty (%u)\n",i,err);
-               }
-       }
-       //insurance for interfaces between Aware and CARB
-       mdelay(100);
-       amazon_atm_cell_mib(&mib_cell,0);
-       amazon_atm_cell_mib(&mib_cell,1);
-       amazon_atm_aal5_mib(&mib_aal5);
-       
-       mb();
-       while ( (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) || (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 )  ){
-               AMAZON_TPE_EMSG("\nwaiting for AWARE");
-               AMAZON_TPE_EMSG(" BC0 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0));
-               AMAZON_TPE_EMSG(" BC1 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC1));
-               AMAZON_TPE_EMSG("\n");
-               mdelay(1);
-       }
-       // disable AAI module
-       meiDebugRead(A_CFG_ADDR,&a_cfg_value,1);        
-       a_cfg_old_value=a_cfg_value;
-       a_cfg_value &= (~(0x2800));
-       meiDebugWrite(A_CFG_ADDR,&a_cfg_value,1);       
-       //clear buffer
-       a_cfg_value = 0x1;
-       meiDebugWrite(AR_CB0_STATUS_ADDR,&a_cfg_value,1);       
-       meiDebugWrite(AR_CB1_STATUS_ADDR,&a_cfg_value,1);       
-
-       if ( atm_init_hard(&g_atm_dev) != 0){
-               return -EIO;
-       }
-       sema_init(&(g_atm_dev.swie.in_sem), 1);
-       //SWIE lock
-       clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
-       //SWIE wait queue
-       init_waitqueue_head(&(g_atm_dev.swie.sleep));
-       
-       for (i=CBM_DEFAULT_Q_OFFSET;i<AMAZON_ATM_MAX_QUEUE_NUM/2;i++) {
-               vcc = g_atm_dev.queues[i].vcc;
-               if (vcc != NULL){
-                       set_qsb(vcc, &vcc->qos, i);
-                       set_qd(vcc, i);
-                       mb();
-                       err=set_htu(vcc,i);
-                       if (err){
-                               AMAZON_TPE_EMSG("set htu entry fails %u\n",err);
-                       }
-               }
-       }
-       meiDebugWrite(A_CFG_ADDR,&a_cfg_old_value,1);   
-#if 0
-       //reset DFE
-       *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_DFE);
-       mb();
-       *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) &  (~AMAZON_RST_REQ_DFE);
-       mb();
-#endif
-       
-       return 0;
-}
-
-/* Brief:      Send a ATM EoP packet to save DMA channel
- */
-int amazon_tpe_inject_debug_cell(void)
-{
-       //Send a ATM cell to save DMA channel
-       u8 qid;
-       unsigned char atm_cell[48];
-       qid = 0x11;
-       AMAZON_TPE_DMSG("qid = %d\n",qid);
-       memset(atm_cell,0,48);
-       atm_cell[3] = 0x2;
-       if ( amazon_atm_swin(qid,atm_cell)) {
-               AMAZON_TPE_EMSG("cannot insert EoP cell\n");
-               return -1;
-       }
-       return 0;
-}
-
-/* Brief:      start HTU (TPE)
- */
-
-int amazon_tpe_start(void)
-{
-       AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR);
-       wmb();
-       return 0;
-}
-#endif //AMAZON_TPE_AAL5_RECOVERY
-
-#ifdef AMAZON_CHECK_LINK
-extern int (*adsl_link_notify)(int);
-/*     Brief:  notify link status of ADSL link
- *     Parameters:     0       link down
- *                     1       link up
- *     Returns:        0       OK
- *     Details:        called by MEI driver 
- *     should update status and inform upper layer
- */
-int amazon_tpe_link_notify(int status)
-{
-       adsl_link_status = status;
-       AMAZON_TPE_DMSG("link status %s\n",(status==1)?"Up":"Down");
-       if (status == 0){
-               //wait until no cells in upstream queues
-               set_current_state(TASK_INTERRUPTIBLE);
-               schedule_timeout(2*HZ);
-       }
-       return 0;
-}
-#endif //ifdef AMAZON_CHECK_LINK
-
-/*
- *     Brief:          Initialize ATM module
- *
- *     Return Value:   ENOMEM          - No memory available
- *                     EBUSY           - Cannot register atm device
- *                     ERESTARTSYS     - Process interrupted by other signal
- *                     0               - OK, module initialized
- *
- *     Description:
- *     This function registers an atm device for all UTOPIA devices.
- *     It also allocates memory for the private device data structures
- */
-int __init amazon_atm_net_init(void)
-{
-       int i;
-       int err=0;
-       amazon_atm_dev_t *dev = NULL;
-       
-       if ((dev=amazon_atm_create()) != NULL){
-               for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
-                       if (!dev->ports[i].enable){
-                               amazon_atm_devs[i] = NULL;
-                               continue;
-                       }
-                       amazon_atm_devs[i] =atm_dev_register("amazon_atm",&amazon_atm_ops,-1,0UL);
-                       if (amazon_atm_devs[i] == NULL){
-                               AMAZON_TPE_EMSG("atm_dev_register fails\n");
-                               err = -EIO;
-                               goto amazon_atm_net_init_exit;
-                       }else{
-                               AMAZON_TPE_DMSG("registering device %u\n",i);
-                               amazon_atm_devs[i]->ci_range.vpi_bits = 8;
-                               amazon_atm_devs[i]->ci_range.vci_bits = 16;
-                               amazon_atm_devs[i]->link_rate = dev->ports[i].tx_max_cr;
-                               amazon_atm_devs[i]->dev_data = (void *) i;
-                       }
-               }
-                       
-       }else{
-               err = -ENOMEM;
-               AMAZON_TPE_EMSG("cannot init atm device\n");
-               goto amazon_atm_net_init_exit;
-       }
-#ifdef AMAZON_TPE_AAL5_RECOVERY        
-       tpe_reset = & amazon_tpe_reset;
-       tpe_start = & amazon_tpe_start;
-       tpe_inject = & amazon_tpe_inject_debug_cell;
-#endif //AMAZON_TPE_AAL5_RECOVERY
-#ifdef AMAZON_CHECK_LINK
-       adsl_link_notify=amazon_tpe_link_notify;
-#endif //AMAZON_CHECK_LINK
-amazon_atm_net_init_exit:
-       return err;
-}
-
-void __exit amazon_atm_net_cleanup(void)
-{
-       int i;
-       amazon_atm_cleanup();
-       for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
-               if (amazon_atm_devs[i] != NULL){
-                       AMAZON_TPE_DMSG("unregister dev %u\n",i);
-                       atm_dev_deregister(amazon_atm_devs[i]);
-               }
-       }
-       return;
-}
-EXPORT_SYMBOL(get_oam_time_stamp);
-
-MODULE_LICENSE ("GPL"); 
-MODULE_AUTHOR("Infineon IFAP DC COM peng.liu@infineon.com");
-MODULE_DESCRIPTION("AMAZON ATM driver");
-
-module_init(amazon_atm_net_init);
-module_exit(amazon_atm_net_cleanup);
-
-
-
-
diff --git a/target/linux/amazon/files/drivers/char/amazon_mei.c b/target/linux/amazon/files/drivers/char/amazon_mei.c
deleted file mode 100644 (file)
index 7efe52e..0000000
+++ /dev/null
@@ -1,7918 +0,0 @@
-/* ============================================================================
- * Copyright (C) 2004 -Infineon Technologies AG.
- *
- * All rights reserved.
- * ============================================================================
- *
- *============================================================================
- * Licensed under GNU GPL v2
- * ============================================================================
- */
-
-/* ===========================================================================
- *
- * File Name:   amazon_mei.c
- * Author :     Ou Ke
- *
- * ===========================================================================
- *
- * Project: Amazon
- *
- * ===========================================================================
- * Contents:This file implements the MEI driver for Amazon ADSL/ADSL2+
- *  controller.
- *  
- * ===========================================================================
- * References: 
- *
- */
-
-
-/* ===========================================================================
- * Revision History:
- *             12/1/2005 : Ritesh Banerjee
- *                     - Create a kernel thread kmibpoll to poll for periodic RFC 2662
- *                     and RFC 3440 counters. Removes the need for user space 
- *                     adsl_mibpoll_daemon and saves atleast 30KB of RAM.
- *
- * $Log$
- * ===========================================================================
- */
-
-/*
- * ===========================================================================
- *                           INCLUDE FILES
- * ===========================================================================
- */
-//000002:fchang 2005/6/2 joelin 04/27/2005 for pcm clock
-//000003:fchang 2005/6/2 Henry added for Amazon-E support
-//165001:henryhsu 2005/9/6 Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash.
-// 509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC
-// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics
-
-#ifndef EXPORT_SYMTAB
-#define EXPORT_SYMTAB
-#endif
-#define AMAZON_MEI_MIB_RFC3440
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/module.h>               
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <asm/irq.h>
-#include <asm/segment.h>
-#include <asm/semaphore.h>
-#include <linux/init.h>                                  
-#include <linux/ioport.h>
-#include <asm/uaccess.h>                       
-#include <linux/proc_fs.h>
-#include <asm/io.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/poll.h>
-#include <linux/list.h>
-#include <linux/time.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/irq.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/amazon_mei.h>
-#include <asm/amazon/amazon_mei_app.h>
-#include <asm/amazon/amazon_mei_ioctl.h>
-#include <asm/amazon/amazon_mei_app_ioctl.h>
-
-#define SET_BIT(reg, mask)                  reg |= (mask)
-#define CLEAR_BIT(reg, mask)                reg &= (~mask)
-#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
-
-extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
-
-#ifdef AMAZON_CHECK_LINK
-//amazon_tpe.c
-extern int (*adsl_link_notify)(int);
-#endif //AMAZON_CHECK_LINK
-
-// for ARC memory access
-#define WHILE_DELAY 20000
-#define AMAZON_DMA_DEBUG_MUTEX
-
-
-//TODO
-#undef DFE_LOOPBACK
-#define ARC_READY_ACK
-
-static amazon_mei_mib * current_intvl;
-static struct list_head interval_list;
-static amazon_mei_mib * mei_mib;
-
-static int reboot_firsttime=1;//000002:fchang
-
-       //PCM
-#define PCM_CHANNEL_NUM                2       //1 rx, 1 tx
-static pcm_data_struct pcm_data[PCM_CHANNEL_NUM]__attribute__ ((aligned(4)));  //0=tx0, 1=rx0, 2=tx1, 3=rx1
-static u32 pcm_start_addr;
-//#define PCM_HRT_TIME_HZ              4000    //?us
-#define PCM_ACCESS_DEBUG
-static int irqtimes=0;
-#undef DATA_LED_ON_MODE
-#define ADSL_LED_SUPPORT       //joelin for adsl led
-#ifdef ADSL_LED_SUPPORT
-static int firmware_support_led=0; //joelin version check      for adsl led    
-static int stop_led_module=0;  //wakeup and clean led module
-static int led_support_check=0;        //1.1.2.7.1.1
-#endif //ADSL_LED_SUPPORT
-#define IFX_DYING_GASP
-#ifdef IFX_DYING_GASP
-static wait_queue_head_t wait_queue_dying_gasp;        //dying gasp
-//struct tq_struct dying_gasp_task;            //dying gasp
-static wait_queue_head_t wait_queue_uas_poll;  //joelin 04/16/2005
-static u16 unavailable_seconds=0;              //joelin 04/16/2005
-static meidebug lop_debugwr;                           //dying gasp
-#endif //IFX_DYING_GASP
-static int dbg_int=0;
-//#define DEBUG_ACCESS_DELAY   for(dbg_int=0;dbg_int<100;dbg_int++){;}
-#define DEBUG_ACCESS_DELAY
-static u8 sampledata[512];
-static int firsttime[PCM_CHANNEL_NUM]={0,1};
-static int num_cmp[PCM_CHANNEL_NUM]={0,0};
-static int pcm_start_loc[PCM_CHANNEL_NUM]={0,0}; 
-
-       // for clearEoC 
-//#define MEI_CLREOC_BUFF_SIZE 512     //double the receive fifo size, bytes
-//static u8 clreoc[MEI_CLREOC_BUFF_SIZE]__attribute__ ((aligned(4)));  //buffer to hold clearEoC data in bytes
-#undef AMAZON_CLEAR_EOC
-#ifdef AMAZON_CLEAR_EOC
-extern void ifx_push_eoc(struct sk_buff * pkt);
-#endif
-static int meiResetArc(void); 
-#define IFX_POP_EOC_DONE       0
-#define IFX_POP_EOC_FAIL       -1
-static struct list_head clreoc_list;
-static amazon_clreoc_pkt * clreoc_pkt;
-#define CLREOC_BUFF_SIZE       12      //number of clreoc commands being buffered
-//static int clreoc_wr=0;
-//static int clreoc_rd=0;              //used to control clreoc circular buffer 
-static wait_queue_head_t wait_queue_clreoc;
-#ifdef ADSL_LED_SUPPORT
-static wait_queue_head_t wait_queue_led;       //adsl led
-static wait_queue_head_t wait_queue_led_polling;// adsl led
-struct tq_struct led_task;                     // adsl led
-static DECLARE_TASK_QUEUE(tq_ifx_led);         // task
-int adsl_led_flash_task(void *ptr);            // adsl led
-#endif //ADSL_LED_SUPPORT
-static void * clreoc_command_pkt=NULL;
-static int clreoc_max_tx_len=0;
-
-// 603221:tc.chen start
-#define ME_HDLC_IDLE 0
-#define ME_HDLC_INVALID_MSG 1
-#define ME_HDLC_MSG_QUEUED 2
-#define ME_HDLC_MSG_SENT 3
-#define ME_HDLC_RESP_RCVD 4
-#define ME_HDLC_RESP_TIMEOUT 5
-#define ME_HDLC_RX_BUF_OVERFLOW 6
-#define ME_HDLC_UNRESOLVED 1
-#define ME_HDLC_RESOLVED 2
-// 603221:tc.chen end
-
-#ifdef LOCK_RETRY
-static int reboot_lock=0;
-#endif
-
-static mib_previous_read mib_pread={0,0,0,0,0,0,0,0,0,0,0,0};
-static mib_flags_pretime mib_pflagtime;// initialized when module loaded
-
-       static u32 ATUC_PERF_LOFS=0;
-       static u32 ATUC_PERF_LOSS=0;
-       static u32 ATUC_PERF_ESS=0;
-       static u32 ATUC_PERF_INITS=0;
-       static u32 ATUR_PERF_LOFS=0;
-       static u32 ATUR_PERF_LOSS=0;
-       static u32 ATUR_PERF_LPR=0;
-       static u32 ATUR_PERF_ESS=0;
-       static u32 ATUR_CHAN_RECV_BLK=0;
-       static u32 ATUR_CHAN_TX_BLK=0;
-       static u32 ATUR_CHAN_CORR_BLK=0;
-       static u32 ATUR_CHAN_UNCORR_BLK=0;
-       //RFC-3440
-       static u32 ATUC_PERF_STAT_FASTR=0;
-       static u32 ATUC_PERF_STAT_FAILED_FASTR=0;
-       static u32 ATUC_PERF_STAT_SESL=0;
-       static u32 ATUC_PERF_STAT_UASL=0;
-       static u32 ATUR_PERF_STAT_SESL=0;
-       static u32 ATUR_PERF_STAT_UASL=0;
-
-       static adslChanPrevTxRate PrevTxRate={0,0};
-       static adslPhysCurrStatus CurrStatus={0,0};
-       static ChanType chantype={0,0};
-       static adslLineAlarmConfProfileEntry AlarmConfProfile={"No Name\0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1};
-// 603221:tc.chen start
-       static adslFarEndPerfStats FarendStatsData;
-       struct timeval FarendData_acquire_time={0};
-       static u32 adsl_mode,adsl_mode_extend; // adsl mode : adsl/ 2/ 2+
-       static adslInitStats AdslInitStatsData;
-//603221:tc.chen end
-static u32 loop_diagnostics_mode=0;
-static wait_queue_head_t wait_queue_loop_diagnostic;
-#ifdef AMAZON_MEI_MIB_RFC3440
-       static adslLineAlarmConfProfileExtEntry AlarmConfProfileExt={"No Name\0",0,0,0,0,0,0};
-#endif
-
-static int showtime=0;
-static int loop_diagnostics_completed=0;
-//////////////////////////////////////////////////////////////////////////////////
-static int phy_mei_net_init(struct net_device * dev);
-static int interleave_mei_net_init(struct net_device * dev);
-static int fast_mei_net_init(struct net_device * dev);
-static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev);
-static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev);
-static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev);
-
-typedef struct mei_priv{
-        struct net_device_stats stats;
-}mei_priv;
-
-static struct net_device phy_mei_net = { init: phy_mei_net_init, name: "MEI_PHY"};
-static struct net_device interleave_mei_net = { init: interleave_mei_net_init, name: "MEI_INTL"};
-static struct net_device fast_mei_net = { init: fast_mei_net_init, name: "MEI_FAST"};
-///////////////////////////////////////////////////////////////////////////////////
-
-static int major=AMAZON_MEI_MAJOR;
-
-static struct semaphore mei_sema;
-
-// Mei to ARC CMV count, reply count, ARC Indicator count
-static int indicator_count=0;
-static int cmv_count=0;
-static int reply_count=0;
-static u16 Recent_indicator[MSG_LENGTH];
-
-// Used in interrupt handler as flags
-static int arcmsgav=0;
-static int cmv_reply=0;
-static int cmv_waiting=0;
-
-#define PROC_ITEMS 8
-
-long mei_debug_mode = 0; //509221:tc.chen for adsl firmware debug
-
-//  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
-static wait_queue_head_t wait_queue_arcmsgav;
-static wait_queue_head_t wait_queue_codeswap;
-static wait_queue_head_t wait_queue_mibdaemon;
-static wait_queue_head_t wait_queue_reboot;
-static u32 * image_buffer=NULL;                // holding adsl firmware image
-static u16 RxMessage[MSG_LENGTH]__attribute__ ((aligned(4)));
-static u16 TxMessage[MSG_LENGTH]__attribute__ ((aligned(4)));                                                                                                               
-static u32 * mei_arc_swap_buff=NULL;           //  holding swap pages
-static ARC_IMG_HDR * img_hdr;
-static int reboot_flag;
-
-#ifdef DFE_LOOPBACK
-#include "arc_pm.h"
-#endif
-
-
-/////////////////               net device                              ///////////////////////////////////////////////////
-static int phy_mei_net_init(struct net_device * dev)
-{
-        //ether_setup(dev);
-        dev->get_stats = phy_mei_net_get_stats;
-        dev->ip_ptr = NULL;
-       dev->type = 94;
-       
-//     dev->mtu=12345;
-       dev->flags=IFF_UP;
-       
-        dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
-        if(dev->priv == NULL)
-                return -ENOMEM;
-        memset(dev->priv, 0, sizeof(struct mei_priv));
-        return 0;
-}
-
-static int interleave_mei_net_init(struct net_device * dev)
-{
-        //ether_setup(dev);
-        dev->get_stats = interleave_mei_net_get_stats;
-        dev->ip_ptr = NULL;
-       dev->type = 124;
-       dev->flags=IFF_UP;
-        dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
-        if(dev->priv == NULL)
-                return -ENOMEM;
-        memset(dev->priv, 0, sizeof(struct mei_priv));
-        return 0;
-}
-
-static int fast_mei_net_init(struct net_device * dev)
-{
-        //ether_setup(dev);
-        dev->get_stats = fast_mei_net_get_stats;
-        dev->ip_ptr = NULL;
-       dev->type = 125;
-       dev->flags=IFF_UP;
-        dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
-        if(dev->priv == NULL)
-                return -ENOMEM;
-        memset(dev->priv, 0, sizeof(struct mei_priv));
-        return 0;
-}
-
-static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev)
-{
-        struct mei_priv * priv;
-        priv = (struct mei_priv *)dev->priv;
-       // update statistics
-       (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
-       (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
-       (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
-       (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
-       
-        return &(priv->stats);
-}
-
-static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev)
-{
-        struct mei_priv * priv;
-        priv = (struct mei_priv *)dev->priv;
-       // update statistics
-       (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
-       (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
-       (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
-       (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
-       
-        return &(priv->stats);
-}
-
-static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev)
-{
-        struct mei_priv * priv;
-        priv = (struct mei_priv *)dev->priv;
-       // update statistics
-       (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
-       (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
-       (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
-       (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
-       
-        return &(priv->stats);
-}
-/////////////////               mei access Rd/Wr methods       ///////////////////////////////////////////////////
-void meiLongwordWrite(u32 ul_address, u32 ul_data)
-{
-       *((volatile u32 *)ul_address) = ul_data;
-       asm("SYNC");
-       return;
-} //   end of "meiLongwordWrite(..."
-
-void meiLongwordRead(u32 ul_address, u32 *pul_data)
-{
-       *pul_data = *((volatile u32 *)ul_address);
-       asm("SYNC");
-       return;
-} //   end of "meiLongwordRead(..."
-
-MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 *p = databuff;
-       u32 temp;
-       u32 flags;
-
-       if( destaddr & 3)
-               return MEI_FAILURE;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-               
-
-       //      Set the write transfer address
-       meiLongwordWrite(MEI_XFR_ADDR, destaddr);
-
-       //      Write the data pushed across DMA
-       while (databuffsize--)
-       {
-               temp = *p;
-               if(databuff==(u32 *)TxMessage)  // swap half word
-                       temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
-               meiLongwordWrite(MEI_DATA_XFR, temp);
-               p++;
-       } //    end of "while(..."
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);   
-#endif
-       
-       return MEI_SUCCESS;
-
-} //   end of "meiDMAWrite(..."
-
-MEI_ERROR meiDMAWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 *p = databuff;
-       u32 temp;
-       u32 flags;
-
-       if( destaddr & 3)
-               return MEI_FAILURE;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-               
-
-       //      Set the write transfer address
-       meiLongwordWrite(MEI_XFR_ADDR, destaddr);
-
-       //      Write the data pushed across DMA
-       while (databuffsize--)
-       {
-               temp = *p;
-               temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
-               meiLongwordWrite(MEI_DATA_XFR, temp);
-               p++;
-       } //    end of "while(..."
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       return MEI_SUCCESS;
-
-} //   end of "meiDMAWrite_16(..."
-
-MEI_ERROR meiDMAWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 *p = databuff;
-       u32 temp;
-       u32 flags;
-
-       if( destaddr & 3)
-               return MEI_FAILURE;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-               
-
-       //      Set the write transfer address
-       meiLongwordWrite(MEI_XFR_ADDR, destaddr);
-
-       //      Write the data pushed across DMA
-       while (databuffsize--)
-       {
-               temp = *p;
-               temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
-               meiLongwordWrite(MEI_DATA_XFR, temp);
-               p++;
-       } //    end of "while(..."
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       return MEI_SUCCESS;
-
-} //   end of "meiDMAWrite_8(..."
-
-MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 *p = databuff;
-       u32 temp;
-       u32 flags;
-       
-       if( srcaddr & 3)
-               return MEI_FAILURE;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-       
-
-       //      Set the read transfer address
-       meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
-
-       //      Read the data popped across DMA
-       while (databuffsize--)
-       {
-               meiLongwordRead(MEI_DATA_XFR, &temp);
-               if(databuff==(u32 *)RxMessage)  // swap half word
-                       temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
-               *p=temp;
-               p++;
-       } //    end of "while(..."
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       return MEI_SUCCESS;
-
-} //   end of "meiDMARead(..."
-
-MEI_ERROR meiDMARead_16(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 *p = databuff;
-       u32 temp;
-       u32 flags;
-       
-       if( srcaddr & 3)
-               return MEI_FAILURE;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-               
-
-       //      Set the read transfer address
-       meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
-
-       //      Read the data popped across DMA
-       while (databuffsize--)
-       {
-               meiLongwordRead(MEI_DATA_XFR, &temp);
-               temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
-               *p=temp;
-               p++;
-       } //    end of "while(..."
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       return MEI_SUCCESS;
-
-} //   end of "meiDMARead_16(..."
-
-MEI_ERROR meiDMARead_8(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 *p = databuff;
-       u32 temp;
-       u32 flags;
-       
-       if( srcaddr & 3)
-               return MEI_FAILURE;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-               
-
-       //      Set the read transfer address
-       meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
-
-       //      Read the data popped across DMA
-       while (databuffsize--)
-       {
-               meiLongwordRead(MEI_DATA_XFR, &temp);
-               temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
-               *p=temp;
-               p++;
-       } //    end of "while(..."
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       return MEI_SUCCESS;
-
-} //   end of "meiDMARead_8(..."
-
-void meiPollForDbgDone(void)
-{
-       u32     query = 0;
-       int     i=0;
-       while (i<WHILE_DELAY)
-       {
-               meiLongwordRead(ARC_TO_MEI_INT, &query);
-               query &= (ARC_TO_MEI_DBG_DONE);
-               if(query)
-                       break;
-               i++;
-               if(i==WHILE_DELAY){
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n PollforDbg fail");
-#endif
-               }
-                       DEBUG_ACCESS_DELAY;
-       } 
-       meiLongwordWrite(ARC_TO_MEI_INT,  ARC_TO_MEI_DBG_DONE);  // to clear this interrupt
-} //   end of "meiPollForDbgDone(..."
-
-MEI_ERROR meiDebugWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 i;
-       u32 temp = 0x0;
-       u32 address = 0x0;
-       u32 *buffer = 0x0;
-       u32 flags;
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-       
-
-       //      Open the debug port before DMP memory write
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;     
-       temp |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
-               DEBUG_ACCESS_DELAY;
-
-       //      For the requested length, write the address and write the data
-       address = destaddr;
-       buffer = databuff;
-       for (i=0; i < databuffsize; i++)
-       {
-               meiLongwordWrite(MEI_DEBUG_WAD, address);
-                       DEBUG_ACCESS_DELAY;
-               temp=*buffer;
-               temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
-               meiLongwordWrite(MEI_DEBUG_DATA, temp);
-                       DEBUG_ACCESS_DELAY;
-               meiPollForDbgDone();
-               address += 4;
-               buffer++;
-       } //    end of "for(..."
-
-       //      Close the debug port after DMP memory write
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       //      Return
-       return MEI_SUCCESS;
-
-} //   end of "meiDebugWrite_8(..."
-
-MEI_ERROR meiDebugRead_8(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 i;
-       u32 temp = 0x0;
-       u32 address = 0x0;
-       u32 *buffer = 0x0;
-       u32 flags;
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-       
-
-       //      Open the debug port before DMP memory read
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
-               DEBUG_ACCESS_DELAY;
-
-       //      For the requested length, write the address and read the data
-       address = srcaddr;
-       buffer = databuff;
-       for (i=0; i<databuffsize; i++)
-       {
-               meiLongwordWrite(MEI_DEBUG_RAD, address);
-                       DEBUG_ACCESS_DELAY;
-               meiPollForDbgDone();
-               meiLongwordRead(MEI_DEBUG_DATA, &temp);
-                       DEBUG_ACCESS_DELAY;
-               temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
-               *buffer=temp;
-               address += 4;
-               buffer++;
-       } //    end of "for(..."
-
-       //      Close the debug port after DMP memory read
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       //      Return
-       return MEI_SUCCESS;
-
-} //   end of "meiDebugRead_8(..."
-
-MEI_ERROR meiDebugWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 i;
-       u32 temp = 0x0;
-       u32 address = 0x0;
-       u32 *buffer = 0x0;
-       u32 flags;
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-       
-
-       //      Open the debug port before DMP memory write
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
-               DEBUG_ACCESS_DELAY;
-
-       //      For the requested length, write the address and write the data
-       address = destaddr;
-       buffer = databuff;
-       for (i=0; i < databuffsize; i++)
-       {
-               meiLongwordWrite(MEI_DEBUG_WAD, address);
-                       DEBUG_ACCESS_DELAY;
-               temp=*buffer;
-               temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
-               meiLongwordWrite(MEI_DEBUG_DATA, temp);
-                       DEBUG_ACCESS_DELAY;
-               meiPollForDbgDone();
-               address += 4;
-               buffer++;
-       } //    end of "for(..."
-
-       //      Close the debug port after DMP memory write
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       //      Return
-       return MEI_SUCCESS;
-
-} //   end of "meiDebugWrite_16(..."
-
-MEI_ERROR meiDebugRead_16(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 i;
-       u32 temp = 0x0;
-       u32 address = 0x0;
-       u32 *buffer = 0x0;
-       u32 flags;
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-       
-
-       //      Open the debug port before DMP memory read
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
-               DEBUG_ACCESS_DELAY;
-
-       //      For the requested length, write the address and read the data
-       address = srcaddr;
-       buffer = databuff;
-       for (i=0; i<databuffsize; i++)
-       {
-               meiLongwordWrite(MEI_DEBUG_RAD, address);
-                       DEBUG_ACCESS_DELAY;
-               meiPollForDbgDone();
-               meiLongwordRead(MEI_DEBUG_DATA, &temp);
-                       DEBUG_ACCESS_DELAY;
-               temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
-               *buffer=temp;
-               address += 4;
-               buffer++;
-       } //    end of "for(..."
-
-       //      Close the debug port after DMP memory read
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       //      Return
-       return MEI_SUCCESS;
-
-} //   end of "meiDebugRead_16(..."
-
-MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 i;
-       u32 temp = 0x0;
-       u32 address = 0x0;
-       u32 *buffer = 0x0;
-       u32 flags;
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-       
-
-       //      Open the debug port before DMP memory write
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
-               DEBUG_ACCESS_DELAY;
-
-       //      For the requested length, write the address and write the data
-       address = destaddr;
-       buffer = databuff;
-       for (i=0; i < databuffsize; i++)
-       {
-               meiLongwordWrite(MEI_DEBUG_WAD, address);
-                       DEBUG_ACCESS_DELAY;
-               temp=*buffer;
-               meiLongwordWrite(MEI_DEBUG_DATA, temp);
-                       DEBUG_ACCESS_DELAY;
-               meiPollForDbgDone();
-               address += 4;
-               buffer++;
-       } //    end of "for(..."
-
-       //      Close the debug port after DMP memory write
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       //      Return
-       return MEI_SUCCESS;
-
-} //   end of "meiDebugWrite(..."
-
-MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
-       u32 i;
-       u32 temp = 0x0;
-       u32 address = 0x0;
-       u32 *buffer = 0x0;
-       u32 flags;
-       
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       save_flags(flags);
-       cli();
-#endif
-       
-
-       //      Open the debug port before DMP memory read
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
-               DEBUG_ACCESS_DELAY;
-
-       //      For the requested length, write the address and read the data
-       address = srcaddr;
-       buffer = databuff;
-       for (i=0; i<databuffsize; i++)
-       {
-               meiLongwordWrite(MEI_DEBUG_RAD, address);
-                       DEBUG_ACCESS_DELAY;
-               meiPollForDbgDone();
-               meiLongwordRead(MEI_DEBUG_DATA, &temp);
-                       DEBUG_ACCESS_DELAY;
-               *buffer=temp;
-               address += 4;
-               buffer++;
-       } //    end of "for(..."
-
-       //      Close the debug port after DMP memory read
-       meiLongwordRead(MEI_CONTROL, &temp);
-               DEBUG_ACCESS_DELAY;
-       temp &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, temp);
-               DEBUG_ACCESS_DELAY;
-               
-#ifdef AMAZON_DMA_DEBUG_MUTEX
-       restore_flags(flags);
-#endif
-
-       //      Return
-       return MEI_SUCCESS;
-
-} //   end of "meiDebugRead(..."
-EXPORT_SYMBOL(meiDebugRead);
-
-void meiMailboxInterruptsDisable(void)
-{
-       meiLongwordWrite(ARC_TO_MEI_INT_MASK, 0x0);
-} //   end of "meiMailboxInterruptsDisable(..."
-
-void meiMailboxInterruptsEnable(void)
-{
-       meiLongwordWrite(ARC_TO_MEI_INT_MASK, MSGAV_EN); 
-} //   end of "meiMailboxInterruptsEnable(..."
-
-MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize)
-{
-       int i;
-       u32 arc_mailbox_status = 0x0;
-       u32 temp=0;
-       MEI_ERROR meiMailboxError = MEI_SUCCESS;
-
-       //      Check arc if mailbox write can be initiated
-/*     meiLongwordRead(MEI_TO_ARC_INT, &arc_mailbox_status);
-       if ((arc_mailbox_status & MEI_TO_ARC_MSGAV))
-       {
-               return MEI_MAILBOX_FULL;
-       }
-*/
-       //      Write to mailbox
-       meiMailboxError = meiDMAWrite(MEI_TO_ARC_MAILBOX, (u32*)msgsrcbuffer, msgsize/2);
-       meiMailboxError = meiDMAWrite(MEI_TO_ARC_MAILBOXR, (u32 *)(&temp), 1); 
-
-       //      Notify arc that mailbox write completed
-       cmv_waiting=1;
-       meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
-       
-       i=0;
-        while(i<WHILE_DELAY){ // wait for ARC to clear the bit
-               meiLongwordRead(MEI_TO_ARC_INT, &arc_mailbox_status);
-               if((arc_mailbox_status & MEI_TO_ARC_MSGAV) != MEI_TO_ARC_MSGAV)
-                       break;
-               i++;
-               if(i==WHILE_DELAY){
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n MEI_TO_ARC_MSGAV not cleared by ARC");
-#endif
-                       meiMailboxError = MEI_FAILURE;
-#if 0                  
-                       for(i=0;i<msgsize;i++)
-                               printk("\n %8x", (*(msgsrcbuffer+i)));
-#endif
-               }       
-       }      
-               
-       //      Return
-       return meiMailboxError;
-
-} //   end of "meiMailboxWrite(..."
-
-MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize)
-{
-       //u32 arc_mailbox_status = 0x0;
-       //u32 *mei_arc_msgbuff = 0x0;
-       MEI_ERROR meiMailboxError = MEI_SUCCESS;
-
-            /*
-            // Check arc if mailbox read can be initiated
-       meiLongwordRead(ARC_TO_MEI_INT, &arc_mailbox_status);
-       if ((arc_mailbox_status & ARC_TO_MEI_MSGAV) == 0)
-       {
-               return MEI_MAILBOX_EMPTY;
-       } //    end of "if(..."
-            */
-            
-       //      Read from mailbox
-       meiMailboxError = meiDMARead(ARC_TO_MEI_MAILBOX, (u32*)msgdestbuffer, msgsize/2);
-
-       //      Notify arc that mailbox read completed
-       meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
-
-       //      Return
-       return meiMailboxError;
-
-} //   end of "meiMailboxRead(..."
-
-MEI_ERROR meiHaltArc(void)
-{
-       u32 arc_control_mode = 0x0;
-       u32 arc_debug_addr = 0x5;
-       u32 arc_debug_data = 0x0;
-
-       //      Switch arc control from JTAG mode to MEI mode- write '1' to bit0
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
-       //      Write arc aux reg access mask (0x0) into debug addr decode reg
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
-
-       //      Write arc debug reg addr (0x5) into debug read addr reg
-       meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
-       meiPollForDbgDone();
-
-       //      Read debug data reg and save content
-       meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
-
-       //      Write arc debug reg addr (0x5) into debug write addr reg
-       meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
-
-       //      Write debug data reg with content ORd with 0x2 (halt bit set)
-       arc_debug_data |= (BIT1);
-       meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data);
-               meiPollForDbgDone();
-
-       //      Switch arc control from MEI mode to JTAG mode- write '0' to bit0
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
-       //      Return
-       return MEI_SUCCESS;
-
-} //   end of "meiHalt(..."
-
-MEI_ERROR meiDownloadBootCode(void)
-{
-       u32 arc_control_mode;
-       u32 boot_loop;
-       u32 page_size;
-       u32 dest_addr;
-
-       u32 arc_debug_addr = 0x31F00;
-       u32 arc_debug_data = 0x10;
-       u32 temp;
-//     int i;
-
-       //MEI_ERROR meiDMAError = MEI_SUCCESS;
-
-       //      Disable mask for arc codeswap interrupts
-       meiMailboxInterruptsDisable();
-
-       //      Switch arc control from JTAG mode to MEI mode- write '1' to bit0
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
-       //      Write (0x10) to CRI_CCR0(0x31F00) to enable ac_clk signal       
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
-       meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
-       meiPollForDbgDone();
-       meiLongwordRead(MEI_DEBUG_DATA, &temp);
-       temp |=arc_debug_data;
-       
-       meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
-       meiLongwordWrite(MEI_DEBUG_DATA, temp);
-        meiPollForDbgDone();
-            //meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
-
-       //      Switch arc control from MEI mode to JTAG mode- write '0' to bit0
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-       
-#ifdef         AMAZON_MEI_DEBUG_ON   //to test ac_clk setting correctness
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-       
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
-       meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
-       meiPollForDbgDone();
-       meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
-
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-       
-//     printk("\n\n ac_clk is %8x\n", arc_debug_data);
-#endif
-
-       /*
-       **      DMA the boot code page(s)
-       */
-#ifdef AMAZON_MEI_DEBUG_ON
-//     printk("\n\n start download pages");
-#endif
-       for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++)
-       {
-               if( img_hdr->page[boot_loop].p_size & BOOT_FLAG)
-               {
-                       page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
-                       if( page_size > 0)
-                       {
-                               meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size);
-                       }
-               }
-               if( img_hdr->page[boot_loop].d_size & BOOT_FLAG)
-               {
-                       page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
-                       if( page_size > 0)
-                       {
-                               meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size);
-                       }
-               }
-       }
-#ifdef AMAZON_MEI_DEBUG_ON
-//     printk("\n\n pages downloaded");
-#endif
-       return MEI_SUCCESS;
-
-} //   end of "meiDownloadBootCode(..."
-
-MEI_ERROR meiRunArc(void)
-{
-       u32 arc_control_mode = 0x0;
-       u32 arc_debug_addr = 0x0;
-       u32 arc_debug_data = 0x0;
-
-       //      Switch arc control from JTAG mode to MEI mode- write '1' to bit0
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
-       //      Write arc aux reg access mask (0x0) into debug addr decode reg
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
-
-       //      Write arc status aux reg addr (0x0) into debug read addr reg
-       meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
-       meiPollForDbgDone();
-
-       //      Read debug data reg and save content
-       meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
-
-       //      Write arc status aux reg addr (0x0) into debug write addr reg
-       meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
-
-       //      Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared)
-       arc_debug_data &= ~(BIT25);
-       meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data);
-        meiPollForDbgDone();
-
-       //      Switch arc control from MEI mode to JTAG mode- write '0' to bit0
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
-       //      Enable mask for arc codeswap interrupts
-       meiMailboxInterruptsEnable();
-
-       //      Return
-       return MEI_SUCCESS;
-
-} //   end of "meiActivate(..."
-
-int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest)
-{
-       u32     size;
-       u32     i;
-       u32     *p;
-
-       if( Page > img_hdr->count)
-               return -2;
-
-       /*
-       **      Get program or data size, depending on "data" flag
-       */
-       size = (data == GET_DATA) ? img_hdr->page[ Page].d_size : img_hdr->page[ Page].p_size;
-
-       size &= BOOT_FLAG_MASK;         //      Clear boot bit!
-       if( size > MaxSize)
-               return -1;
-
-       if( size == 0)
-               return 0;
-       /*
-       **      Get program or data offset, depending on "data" flag
-       */
-       i = data ? img_hdr->page[ Page].d_offset : img_hdr->page[ Page].p_offset;
-
-       /*
-       **      Copy data/program to buffer
-       */
-
-       i /= 4; //      Adjust offset for byte-to-UINT for array operation
-
-       p = (u32 *)img_hdr + i;
-       for(i = 0; i < size; i++)
-               Buffer[i] = *p++;
-       /*
-       **      Pass back data/program destination address
-       */
-       *Dest = data ? img_hdr->page[Page].d_dest : img_hdr->page[Page].p_dest;
-
-       return size;
-}
-
-MEI_ERROR meiCMV(u16 * request, int reply)            // write cmv to arc, if reply needed, wait for reply
-{
-        MEI_ERROR meierror;
-        wait_queue_t wait;
-        
-        cmv_reply=reply;
-        
-        meierror = meiMailboxWrite(request, MSG_LENGTH);
-       
-        if(meierror != MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                printk("\n\n MailboxWrite Fail.");
-#endif
-                return meierror;
-        }
-        else{
-                cmv_count++;
-       }
-
-        if(cmv_reply == NO_REPLY)
-                return MEI_SUCCESS;
-
-        init_waitqueue_entry(&wait, current);
-        add_wait_queue(&wait_queue_arcmsgav, &wait);
-        set_current_state(TASK_INTERRUPTIBLE);
-//     cmv_waiting=1;
-       
-        if(arcmsgav==1){
-                set_current_state(TASK_RUNNING);
-                remove_wait_queue(&wait_queue_arcmsgav, &wait);
-        }
-        else{
-                schedule_timeout(CMV_TIMEOUT);
-                remove_wait_queue(&wait_queue_arcmsgav, &wait);
-        }
-       if(arcmsgav==0){//CMV_timeout
-               cmv_waiting=0;
-               arcmsgav=0;
-#ifdef AMAZON_MEI_DEBUG_ON
-               printk("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n");
-#endif
-               return MEI_MAILBOX_TIMEOUT;     
-       }
-       else{
-               arcmsgav=0;
-                       reply_count++;
-               return MEI_SUCCESS;
-       }
-}
-
-//TODO, for loopback test
-#ifdef DFE_LOOPBACK
-#define mte_reg_base                    (0x4800*4+0x20000)
-/* Iridia Registers Address Constants */
-#define MTE_Reg(r)                              (int)(mte_reg_base + (r*4))
-#define IT_AMODE                                MTE_Reg(0x0004)
-
-
-#define OMBOX_BASE 0x15F80
-#define IMBOX_BASE 0x15FC0
-
-#define TIMER_DELAY   (1024)
-#define BC0_BYTES     (32)
-#define BC1_BYTES     (30)
-#define NUM_MB        (12)
-#define TIMEOUT_VALUE 2000
-
-void BFMWait (u32 cycle) {
-  u32 i;
-  for (i = 0 ; i< cycle ; i++); 
-}
-
-void WriteRegLong(u32 addr, u32 data){
-  //printk("[%8x] <= %8x \n\n", addr, data);
-  *((volatile u32 *)(addr)) =  data; 
-}
-
-u32 ReadRegLong (u32 addr) {
-  u32  rd_val;
-  
-  rd_val = *((volatile u32 *)(addr));
-  //printk("[%8x] => %8x \n\n", addr, rd_val);
-  return rd_val;
-
-}
-
-/* This routine writes the mailbox with the data in an input array */
-void WriteMbox(u32 *mboxarray,u32 size) {
-  u32 i;
-  
-  WriteRegLong(MEI_XFR_ADDR,IMBOX_BASE);
-  for (i=0;i<size;i++) {
-    WriteRegLong(MEI_DATA_XFR,*(mboxarray+i));
-  }
-}
-
-/* This routine reads the output mailbox and places the results into an array */
-void ReadMbox(u32 *mboxarray,u32 size) {
-  u32 i;
-  
-  WriteRegLong(MEI_XFR_ADDR,OMBOX_BASE);
-  for (i=0;i<size;i++) {
-    mboxarray[i] = ReadRegLong(MEI_DATA_XFR);
-  }
-}
-
-void MEIWriteARCValue(u32 address, u32 value)
-{
-  u32 i,check = 0;
-  /* Write address register */
-  *((volatile u32 *)MEI_DEBUG_WAD) =  address;
-
-  /* Write data register */
-  *((volatile u32 *)MEI_DEBUG_DATA) =  value;
-
-  /* wait until complete - timeout at 40*/
-  for (i=0;i<40;i++) {
-    check = *((volatile u32 *)ARC_TO_MEI_INT);
-    if ((check & 0x20)) break;
-    //printk("MEIWriteARCValue: check:%8x\n\n", check);
-    }
-
-  /* clear the flag */
-  *((volatile u32 *)ARC_TO_MEI_INT)  = 0x20;
-
-}
-
-
-void post_mei_init(void)
-{
-u32 mailbox[NUM_MB];
-
-  mailbox[0] = TIMER_DELAY;
-  /* set bytes per bearer channel */
-  mailbox[1] = BC0_BYTES;
-  mailbox[2] = BC1_BYTES;
-  WriteMbox(mailbox, 3);
-
-  WriteRegLong(AAI_ACCESS, 0x00000001);
-
-  /* enable ADSL block clock, ac_clk */
-  WriteRegLong(MEI_CONTROL, 0x01);
-  WriteRegLong(MEI_DEBUG_DEC, 0x00000001); // select ld/st space
-  MEIWriteARCValue(0x31F00,   0x00000010); // write CRI_CCR0 to enable ac_clk
-
-  /* set the MTE to register start */
-  MEIWriteARCValue(IT_AMODE, 0xF);
-  BFMWait(10); 
-}
-
-
-int wait_sync(void)
-{
-u32 mailbox[NUM_MB];
-  /* wait for ATM sync to be achieved on both BC0 and BC1 */
-  u32 timeout=0;
-  ReadMbox(mailbox, 1);
-  u32 readval = mailbox[0];
-  while( ((readval & 0xFFFFFFFF) == 0) && (timeout < TIMEOUT_VALUE) ) {
-    BFMWait(1);
-    //printk("wait_sync\n\n");
-    ReadMbox(mailbox, 1);
-    readval = mailbox[0];
-    timeout++;
-  }
-  if(timeout == TIMEOUT_VALUE)return 0;
-  else return 1;
-}
-#endif //DFE_LOOPBACK
-//end of TODO, for loopback test
-
-MEI_ERROR meiForceRebootAdslModem(void)
-{
-#if 0
-//#ifdef       ARC_READY_ACK
-               if(down_interruptible(&mei_sema))       //disable CMV access until ARC ready
-               {
-                       return -ERESTARTSYS;
-               }
-#endif
-       if(reboot_firsttime==1){//000002:fchang Start
-               // reset ARC
-               *((volatile u32 *)0xB0100910) = 0x80;   //reset DFE
-               asm("SYNC");
-               *((volatile u32 *)0xB0100910) = 0x0;
-               asm("SYNC");
-               if((*((volatile u32 *)0xB0100910))!=0x0)
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n reset DFE fail");
-#endif
-               
-               // reset ARC
-               meiLongwordWrite(MEI_CONTROL, SOFT_RESET);
-               asm("SYNC");
-               meiLongwordWrite(MEI_CONTROL, 0);
-               asm("SYNC");    
-
-       }       //000002:fchang End             
-#ifdef DFE_LOOPBACK
-                img_hdr=(ARC_IMG_HDR *)lp_image;
-#else
-               img_hdr=(ARC_IMG_HDR *)image_buffer;
-#endif         
-//             printk("\n\n enter haltarc");
-                meiHaltArc();
-//             printk("\n\n haltarc done");
-//000002:fchang Start
-       if(reboot_firsttime==0){
-               printk("\n\n new reboot");
-               meiResetArc();
-               meiResetCore();
-       }
-       if(reboot_firsttime==1)
-                meiDownloadBootCode();
-       else
-               mei_ioctl((struct inode *)NULL, (struct file *)NULL, AMAZON_MEI_DOWNLOAD, (unsigned long)NULL);
-
-//000002:fchang End
-#ifdef AMAZON_MEI_DEBUG_ON
-//             printk("\n\n Download Done");
-#endif
-
-#ifdef DFE_LOOPBACK
-               post_mei_init();
-#endif         
-
-//             sema_init(&mei_sema, 1);
-               //up(&mei_sema);
-
-//             enable_irq(AMAZON_MEI_INT);
-                                       
-               meiRunArc();
-//000002:fchang Start          
-       if(reboot_firsttime==0){
-               meiEnalbeMailboxInt();
-       }               
-//000002:fchang End
-               
-#ifdef AMAZON_MEI_DEBUG_ON
-//             printk("\n\n ARC Running");
-#endif
-               
-#ifdef         AMAZON_MEI_DEBUG_ON   //to test ac_clk setting correctness
-       {
-       u32 arc_control_mode;
-       u32 arc_debug_addr = 0x31F00;
-       u32 arc_debug_data = 0x10;
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode |= (HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-       
-       meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
-       meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
-       meiPollForDbgDone();
-       meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
-
-       meiLongwordRead(MEI_CONTROL, &arc_control_mode);
-       arc_control_mode &= ~(HOST_MSTR);
-       meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-       
-//     printk("\n\n ac_clk is %8x\n", arc_debug_data);
-       }
-#endif         
-                       
-               
-#ifdef DFE_LOOPBACK
-               if (wait_sync() == 0){
-                       printk("ARC fails to run: time out\n\n");
-               }else{
-//                     printk("ARC is ready\n\n");
-               }
-#endif         
-               if(reboot_firsttime==1) //000002:fchang
-                       reboot_firsttime=0;     //000002:fchang
-               
-                return MEI_SUCCESS;
-}
-
-////////////////////            procfs debug            ////////////////////////////////////////////////////////
-#define MEI_DIRNAME     "mei"
-static struct proc_dir_entry *meidir;
-
-static ssize_t proc_write(struct file *, const char *, size_t, loff_t *);
-static ssize_t proc_read(struct file *, char *, size_t, loff_t *);
-
-static struct file_operations proc_operations = {
-       read:   proc_read,
-       write:  proc_write,
-};
-
-typedef struct reg_entry {
-       int * flag;
-       char name[30];          // big enough to hold names
-       char description[100];      // big enough to hold description
-       unsigned short low_ino;
-} reg_entry_t;
-
-static reg_entry_t regs[PROC_ITEMS];       // total items to be monitored by /proc/mei
-
-#define NUM_OF_REG_ENTRY       (sizeof(regs)/sizeof(reg_entry_t))
-
-static int proc_read(struct file * file, char * buf, size_t nbytes, loff_t *ppos)
-{
-        int i_ino = (file->f_dentry->d_inode)->i_ino;
-       char outputbuf[64];
-       int count=0;
-       int i;
-       u32 version=0;
-       reg_entry_t* current_reg=NULL;
-       
-       for (i=0;i<NUM_OF_REG_ENTRY;i++) {
-               if (regs[i].low_ino==i_ino) {
-                       current_reg = &regs[i];
-                       break;
-               }
-       }
-       if (current_reg==NULL)
-               return -EINVAL;
-       
-       if (current_reg->flag == (int *) 8){
-       ///proc/mei/version
-       //format:
-       //Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl
-       //Firmware Date Time Code: date/month min:hour
-               if (*ppos>0) /* Assume reading completed in previous read*/
-                       return 0;               // indicates end of file
-               if(down_interruptible(&mei_sema))
-                       return -ERESTARTSYS;
-               
-               //if (indicator_count != 1){
-               if (indicator_count < 1){
-                       up(&mei_sema);
-                       return -EAGAIN;
-               }
-               //major:bits 0-7 
-               //minor:bits 8-15
-               makeCMV(H2D_CMV_READ, INFO, 54, 0, 1, NULL);
-               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#if 0
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n WINHOST CMV fail");
-#endif 
-#endif
-                       up(&mei_sema);
-                       return -EIO;
-               }
-               version = RxMessage[4];
-               count = sprintf(outputbuf, "%d.%d.",(version)&0xff,(version>>8)&0xff);
-               
-               //sub_version:bits 4-7
-               //int_version:bits 0-3
-               //spl_appl:bits 8-13
-               //rel_state:bits 14-15
-               makeCMV(H2D_CMV_READ, INFO, 54, 1, 1, NULL);
-               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#if 0
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n WINHOST CMV fail");        
-#endif
-#endif
-                       up(&mei_sema);
-                       return -EFAULT;
-               }
-               version =RxMessage[4];
-               count += sprintf(outputbuf+count, "%d.%d.%d.%d",
-                               (version>>4)&0xf, 
-                               version&0xf,
-                               (version>>14)&0x3, 
-                               (version>>8)&0x3f);     
-#ifdef ADSL_LED_SUPPORT                                
-// version check -start        for adsl led                    
-               if ((((version>>4)&0xf)==2)&&((version&0xf)>=3)&&((version&0xf)<7)) firmware_support_led=1;
-               else if ((((version>>4)&0xf)==2)&&((version&0xf)>=7)) firmware_support_led=2;
-               else if (((version>>4)&0xf)>2) firmware_support_led=2;
-
-//165001:henryhsu:20050906:Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash.
-       //else firmware_support_led=0;
-       else firmware_support_led=2;
-//165001               
-
-
-// version check -end  
-#endif 
-               //Date:bits 0-7
-               //Month:bits 8-15
-               makeCMV(H2D_CMV_READ, INFO, 55, 0, 1, NULL);
-               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#if 0
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n WINHOST CMV fail");
-#endif 
-#endif
-                       up(&mei_sema);
-                       return -EIO;
-               }
-               version = RxMessage[4];
-               
-               //Hour:bits 0-7
-               //Minute:bits 8-15
-               makeCMV(H2D_CMV_READ, INFO, 55, 1, 1, NULL);
-               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#if 0
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n WINHOST CMV fail");
-#endif 
-#endif
-                       up(&mei_sema);
-                       return -EFAULT;
-               }
-               version += (RxMessage[4]<<16);
-               count += sprintf(outputbuf+count, " %d/%d %d:%d\n"
-                               ,version&0xff
-                               ,(version>>8)&0xff
-                               ,(version>>25)&0xff
-                               ,(version>>16)&0xff);
-                               
-               up(&mei_sema);  
-               
-               *ppos+=count;
-       }else if(current_reg->flag != (int *)Recent_indicator){
-               if (*ppos>0) /* Assume reading completed in previous read*/
-                       return 0;               // indicates end of file
-               count = sprintf(outputbuf, "0x%08X\n\n", *(current_reg->flag));
-               *ppos+=count;
-               if (count>nbytes)  /* Assume output can be read at one time */
-                       return -EINVAL;
-        }else{
-               if((int)(*ppos)/((int)7)==16)
-                       return 0;  // indicate end of the message
-               count = sprintf(outputbuf, "0x%04X\n\n", *(((u16 *)(current_reg->flag))+ (int)(*ppos)/((int)7)));
-                *ppos+=count;
-       }
-       if (copy_to_user(buf, outputbuf, count))
-               return -EFAULT;
-       return count;
-}
-
-static ssize_t proc_write(struct file * file, const char * buffer, size_t count, loff_t *ppos)
-{
-       int i_ino = (file->f_dentry->d_inode)->i_ino;
-       reg_entry_t* current_reg=NULL;
-       int i;
-       unsigned long newRegValue;
-       char *endp;
-
-       for (i=0;i<NUM_OF_REG_ENTRY;i++) {
-               if (regs[i].low_ino==i_ino) {
-                       current_reg = &regs[i];
-                       break;
-               }
-       }
-       if ((current_reg==NULL) || (current_reg->flag == (int *)Recent_indicator))
-               return -EINVAL;
-
-       newRegValue = simple_strtoul(buffer,&endp,0);
-       *(current_reg->flag)=(int)newRegValue;
-       return (count+endp-buffer);
-}
-////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]///////////////////////////
-void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data)
-{
-       memset(TxMessage, 0, MSG_LENGTH*2);
-       TxMessage[0]= (opcode<<4) + (size&0xf);
-       TxMessage[1]= (((index==0)?0:1)<<7) + (group&0x7f);
-       TxMessage[2]= address;
-       TxMessage[3]= index;
-       if(opcode == H2D_CMV_WRITE)
-               memcpy(TxMessage+4, data, size*2);
-       return;
-}
-
-////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]///////////////////////////
-void makeCMV_local(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data,u16 *CMVMSG)
-{
-       memset(CMVMSG, 0, MSG_LENGTH*2);
-       CMVMSG[0]= (opcode<<4) + (size&0xf);
-       CMVMSG[1]= (((index==0)?0:1)<<7) + (group&0x7f);
-       CMVMSG[2]= address;
-       CMVMSG[3]= index;
-       if(opcode == H2D_CMV_WRITE)
-               memcpy(CMVMSG+4, data, size*2);
-       return;
-}
-
-////////////////                Driver Structure                /////////////////////////////////////////////////////////////////////////////
-static ssize_t mei_write(struct file *, const char *, size_t, loff_t *);
-static int mei_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-
-static struct file_operations mei_operations = {
-        write:                 mei_write,
-        ioctl:                 mei_ioctl,
-};
-
-
-static ssize_t mei_write(struct file * filp, const char * buf, size_t size, loff_t * loff)
-{
-//     printk("\n\n mei_write entered");
-//      image_buffer = (u32 *)kmalloc(size, GFP_KERNEL);
-       image_buffer = (u32 *)vmalloc(size);
-//     printk("\n\n image_buffer kmalloc done");
-       if(image_buffer == NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
-//             printk("\n\n kmalloc for firmware image fail");
-               printk("\n\n vmalloc for firmware image fail");
-#endif
-               return -1;
-       }
-       copy_from_user((char *)image_buffer, buf, size);
-//     printk("\n\n copy_from_user done");
-        return size;
-}
-
-       ////////// ISR GPTU Timer 6 for high resolution timer /////////////
-void amazon_timer6_interrupt_MEI(int irq, void *dev_id, struct pt_regs *regs)
-{
-       int i,j;
-       u32 temp;
-       u16 temp16;
-       u16 rdindex, wrindex;
-       u16 num_rd=0;   //num of byte can be read
-       u16 bytes_to_wr=0;
-       
-//     printk("\n\nenter timer\n\n");
-       irqtimes++;
-//     printk("\n%d\n",irqtimes);
-
-
-/*
-#ifdef PCM_ACCESS_DEBUG
-               meiDebugRead_8(0x30f20, &temp, 1);
-#else
-               meiDMARead_8(0x30f20, &temp, 1);
-#endif         
-       if((temp&0x4000)!=0){
-               printk("\nER_ERR");
-#ifdef PCM_ACCESS_DEBUG
-               meiDebugWrite_8(0x30f20, &temp, 1);
-#else
-               meiDMAWrite_8(0x30f20, &temp, 1);
-#endif
-#ifdef PCM_ACCESS_DEBUG
-               meiDebugRead_8(0x30f20, &temp, 1);
-#else
-               meiDMARead_8(0x30f20, &temp, 1);
-#endif
-               if((temp&0x4000)!=0)
-                       printk("\nER_ERR not cleared");
-       }
-*/     
-       
-       for(i=PCM_CHANNEL_NUM-1;i>=0;i--){// start from last channel, which is rx  
-#ifdef PCM_ACCESS_DEBUG
-               meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
-#else
-               meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
-#endif
-               wrindex = (u16)((temp & 0xffff0000)>>16);
-//             printk(" %d",wrindex);
-#ifdef PCM_ACCESS_DEBUG
-               meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1);
-#else
-               meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1);
-#endif
-               rdindex = (u16)(temp & 0xffff);
-//             printk(" %d",rdindex);
-               if(rdindex<=wrindex)
-                       num_rd=((wrindex-rdindex)/4)*4; //read multiply of 4 bytes
-               else
-                       num_rd=((pcm_data[i].len-(rdindex-wrindex))/4)*4;       //read multiply of 4 bytes
-               
-               if(i%2!=0){//rx channel
-                       pcm_data[i].point=0;
-                       for(j=0;j<num_rd/4;j++){
-                               if(pcm_data[i].finish!=1){
-                                       if((rdindex+j*4)>=pcm_data[i].len)
-                                               temp16=(rdindex+j*4) - pcm_data[i].len;
-                                       else
-                                               temp16=rdindex+j*4;
-#ifdef PCM_ACCESS_DEBUG
-                                       meiDebugRead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
-#else
-                                       meiDMARead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
-#endif
-                               //      printk(" %8x", *((u32*)(pcm_data[i].buff+pcm_data[i].point)));  
-                               /*      if(pcm_data[i].point==0){
-                                               if(pcm_data[i].buff[0]==0xA5){// start of loopback data
-                                                       pcm_data[i].point+=4;   
-                                                       printk("\nstart receive data");
-                                               }       
-                                       } 
-                                       else*/
-                                               pcm_data[i].point+=4;
-                               /*      if(pcm_data[i].point==PCM_BUFF_SIZE){   //finish rx
-                                               pcm_data[i].finish=1;
-                                               printk("\nchannel[%d] finished", i);
-                                       }       */
-                               }
-                       }
-                       if(firsttime[i]==1){
-                               for(j=0;j<num_rd;j++){
-                                       if(pcm_data[i].buff[j]==0x1){
-                                               num_cmp[i]=num_rd-j;
-                                               firsttime[i]=0;
-                                               break;
-                                       }
-                               }
-                               if(memcmp(sampledata+1, pcm_data[i].buff+j, num_cmp[i])!=0)
-                                       printk("\n\ndata wrong,1st\n\n");
-                               else
-                                       pcm_start_loc[i] = num_cmp[i]+1;
-                       }
-                       else{
-                               if(memcmp(sampledata+pcm_start_loc[i], pcm_data[i].buff, num_rd)!=0)
-                                       printk("\n\ndata wrong\n\n");
-                               else{
-                                       pcm_start_loc[i]+=num_rd;
-                                       if(pcm_start_loc[i]>=256)
-                                               pcm_start_loc[i]=pcm_start_loc[i]-256;
-                               }
-                       }
-                       
-                       rdindex +=num_rd;
-                       if(rdindex>=pcm_data[i].len)
-                               rdindex=rdindex-pcm_data[i].len;
-#ifdef PCM_ACCESS_DEBUG
-                       meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1);
-#else
-                       meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1);
-#endif
-                       temp= (temp & 0xffff0000) + rdindex;
-#ifdef PCM_ACCESS_DEBUG
-                       meiDebugWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex 
-#else
-                       meiDMAWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex
-#endif
-                       
-                       bytes_to_wr = num_rd;
-                       
-       //              if(bytes_to_wr>0){
-               //              printk(" %d", num_rd);
-               //              printk(" %d", rdindex);
-//                             printk("\n\nrdindex = %d", rdindex);    
-                       //}
-               }
-               else{   //tx channel
-       //              if((bytes_to_wr + num_rd) < pcm_data[i].len){
-                               for(j=0;j<bytes_to_wr/4;j++){
-                                       if(pcm_data[i].finish!=1){
-                                               if((wrindex+j*4)>=pcm_data[i].len)
-                                                       temp16=(wrindex+j*4) - pcm_data[i].len;
-                                               else
-                                                       temp16=wrindex + j*4;
-/*                                                     
-#ifdef PCM_ACCESS_DEBUG
-                                               meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1);
-#else
-                                               meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1);
-#endif*/
-                                                       
-#ifdef PCM_ACCESS_DEBUG
-                                               meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
-                               //              meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff), 1);
-#else
-                                               meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
-#endif         
-                                               pcm_data[i].point+=4;
-                                               if(pcm_data[i].point==PCM_BUFF_SIZE){
-                                       //              pcm_data[i].finish=1; 
-                                       //              printk("\nchannel[%d] finished", i);
-                                                       pcm_data[i].point=0;
-                                               }       
-                                       }
-                               }
-                               wrindex+=bytes_to_wr;
-                               if(wrindex>=pcm_data[i].len)
-                                       wrindex=wrindex-pcm_data[i].len;
-#ifdef PCM_ACCESS_DEBUG
-                               meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
-#else
-                               meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
-#endif
-                               temp=(temp&0xffff) + (wrindex<<16);
-#ifdef PCM_ACCESS_DEBUG
-                               meiDebugWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex
-#else
-                               meiDMAWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex
-#endif
-                       
-                               //if(bytes_to_wr>0){
-                       //              printk(" %d", bytes_to_wr);
-                       //              printk(" %d", wrindex);
-//                                     printk("\n\nwrindex = %d", wrindex);    
-                               //}
-               //      }
-               }
-       }
-       return;
-}
-//000002:fchang Start
-static int meiResetArc(void)
-{
-       u32 auxreg0;
-       u32 auxreg5;
-       int flshcnt=0;
-       int flshcnt1=0;
-       int flshcnt2=0;
-       
-       meiLongwordWrite(MEI_CONTROL, 1);
-       meiLongwordWrite(MEI_DEBUG_DEC, 3);     
-       meiLongwordWrite(MEI_DEBUG_WAD, 0x3c);
-       meiLongwordWrite(MEI_DEBUG_DATA, 0x10);
-       meiPollForDbgDone();
-       meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
-       meiLongwordWrite(MEI_DEBUG_WAD, 0x2);
-       meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
-       meiPollForDbgDone();
-       meiLongwordWrite(MEI_DEBUG_WAD, 0x3);
-       meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
-       meiPollForDbgDone();
-       meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
-       meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
-       meiPollForDbgDone();
-       meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
-       auxreg0 = auxreg0 & 0x03ffffff;
-       meiLongwordWrite(MEI_DEBUG_WAD, 0x0);
-       meiLongwordWrite(MEI_DEBUG_DATA, auxreg0);
-       meiPollForDbgDone();
-       meiLongwordWrite(MEI_DEBUG_WAD, 0x10a);
-       meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
-       meiPollForDbgDone();
-       meiLongwordWrite(MEI_DEBUG_DEC, 0x2);
-       meiLongwordWrite(MEI_DEBUG_WAD, 0xfffc);
-       meiLongwordWrite(MEI_DEBUG_DATA, 0x1fffffff);
-       meiPollForDbgDone();
-       while(flshcnt<3){
-               meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
-               meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
-               meiPollForDbgDone();
-               meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
-               auxreg0 = auxreg0 & 0xff000000;
-               auxreg0 = auxreg0 | 0x3fff;
-               meiLongwordWrite(MEI_DEBUG_WAD, 0x0);
-               meiLongwordWrite(MEI_DEBUG_DATA, auxreg0);
-               meiPollForDbgDone();
-               
-               meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
-               meiLongwordWrite(MEI_DEBUG_RAD, 0x5);
-               meiPollForDbgDone();
-               meiLongwordRead(MEI_DEBUG_DATA, &auxreg5);
-               auxreg5 = auxreg5 | 0x801;
-               meiLongwordWrite(MEI_DEBUG_WAD, 0x5);
-               meiLongwordWrite(MEI_DEBUG_DATA, auxreg5);
-               meiPollForDbgDone();
-               meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
-               meiPollForDbgDone();
-               meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
-               auxreg0 = auxreg0 & 0x00ffffff;
-               if(auxreg0 == 0x4000)
-                       flshcnt = flshcnt+1;
-               else{
-                       if(flshcnt == 0)
-                               flshcnt1 = flshcnt1 +1;
-                       else
-                               flshcnt2 = flshcnt2 +1;
-               }       
-       }
-       
-       return 1;
-}
-
-static int meiResetCore(void)
-{
-       meiLongwordWrite(MEI_CONTROL, 0x1);
-       meiLongwordWrite(MEI_DEBUG_DEC, 0x2);
-       meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10);
-       meiLongwordWrite(MEI_DEBUG_DATA, 0xf);
-       meiPollForDbgDone();
-       meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10);
-       meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
-       meiPollForDbgDone();
-       meiLongwordWrite(MEI_DEBUG_WAD, 0x31f00);
-       meiLongwordWrite(MEI_DEBUG_DATA, 0x55);
-       meiPollForDbgDone();
-       return 1;
-}
-
-static int meiEnalbeMailboxInt(void)
-{
-       u32 arc2meiintmsk;
-       meiLongwordRead(ARC_TO_MEI_INT_MASK, &arc2meiintmsk);
-       arc2meiintmsk = arc2meiintmsk | 0x1;
-       meiLongwordWrite(ARC_TO_MEI_INT_MASK, arc2meiintmsk);
-       meiLongwordWrite(MEI_CONTROL, 0x0);
-       return 1;
-}
-
-
-
-//000002:fchang End
-
-static int mei_ioctl(struct inode * ino, struct file * fil, unsigned int command, unsigned long lon)
-{
-        int i,k;
-       u32 boot_loop;
-       u32 page_size;
-       u32 dest_addr;
-       u32 j;
-       u32 temp;
-       u32 temp2;
-       u16 trapsflag=0;
-       amazon_clreoc_pkt * current_clreoc;
-       struct timeval time_now;
-       struct timeval time_fini;
-       struct list_head * ptr;
-       amazon_mei_mib * mib_ptr;
-//     u16 buff[MSG_LENGTH]__attribute__ ((aligned(4)));
-       structpts pts;
-        int meierr=MEI_SUCCESS;
-       u16 data[12];  //used in makeCMV, to pass in payload when CMV set, ignored when CMV read.
-       meireg regrdwr;
-       meidebug debugrdwr;
-       amazon_mei_mib * temp_intvl;
-       struct sk_buff * eoc_skb;
-// 603221:tc.chen start
-       u16 hdlc_cmd[2];
-       u16 hdlc_rx_buffer[32];
-       int hdlc_rx_len=0;
-// 603221:tc.chen end
-       
-       int from_kernel = 0;//joelin
-       if (ino == (struct inode *)0) from_kernel = 1;//joelin
-       
-//     printk("\n switch.command = %i\n", command);
-        switch(command){
-               case GET_ADSL_LINE_CODE:
-                       pts.adslLineTableEntry_pt = (adslLineTableEntry *)kmalloc(sizeof(adslLineTableEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineTableEntry_pt, (char *)lon, sizeof(adslLineTableEntry));
-                       if(IS_FLAG_SET((&(pts.adslLineTableEntry_pt->flags)), LINE_CODE_FLAG)){
-                               pts.adslLineTableEntry_pt->adslLineCode = 2;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslLineTableEntry_pt, sizeof(adslLineTableEntry));
-                       kfree(pts.adslLineTableEntry_pt);
-                       break;
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case GET_ADSL_ATUC_LINE_EXT:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry));
-                       if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG)){
-                               ATUC_LINE_TRANS_CAP_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 67 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG);   
-                               }       
-                               else{
-                                       memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucCap)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){
-                               ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 67 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG);        
-                               }       
-                               else{
-                                       memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG)){
-                               ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 2 Address 1 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG);        
-                               }       
-                               else{
-                                       memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucActual)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG)){    // not supported currently
-/*
-                               LINE_GLITE_POWER_STATE_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 2 Address 0 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);        
-                               }       
-                               else{
-                                       memcpy((&(pts.adslLineExtTableEntry_pt->adslLineGlitePowerState)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-*/
-                               CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry));
-                       kfree(pts.adslLineTableEntry_pt);
-                       up(&mei_sema);
-                       break;
-#endif
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case SET_ADSL_ATUC_LINE_EXT:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry));
-                       
-                       //only adslLineTransAtucConfig can be set.
-                       CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG);
-                       if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){
-                               memcpy(data,(&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), 2); 
-                               ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 67 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG);        
-                               }       
-                       }
-                       CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG);
-                       CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);
-       
-                       copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry));
-                       kfree(pts.adslLineTableEntry_pt);
-                       up(&mei_sema);
-                       break;
-#endif
-
-               case GET_ADSL_ATUC_PHY:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       pts.adslAtucPhysEntry_pt = (adslAtucPhysEntry *)kmalloc(sizeof(adslAtucPhysEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAtucPhysEntry_pt, (char *)lon, sizeof(adslAtucPhysEntry));
-                       if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG)){
-                               ATUC_PHY_SER_NUM_FLAG_MAKECMV1;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 57 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG);  
-                               }
-                               else{
-                                       memcpy(pts.adslAtucPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                               ATUC_PHY_SER_NUM_FLAG_MAKECMV2;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 57 Index 12");
-#endif
-                                       CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG);  
-                               }
-                               else{
-                                       memcpy((pts.adslAtucPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               } 
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG)){
-                               ATUC_PHY_VENDOR_ID_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 64 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG);        
-                               }       
-                               else{
-                                       memcpy(pts.adslAtucPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG)){
-                               ATUC_PHY_VER_NUM_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 58 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG);  
-                               }       
-                               else{
-                                       memcpy(pts.adslAtucPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_STAT_FLAG)){
-                               pts.adslAtucPhysEntry_pt->status = CurrStatus.adslAtucCurrStatus;
-                       }               
-                       if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG)){
-                               ATUC_CURR_OUT_PWR_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 68 Index 5");
-#endif
-                                       CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG); 
-                               }       
-                               else{
-                                       memcpy((&(pts.adslAtucPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG)){
-                               ATUC_CURR_ATTR_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 69 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG);    
-                               }       
-                               else{
-                                       memcpy((&(pts.adslAtucPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslAtucPhysEntry_pt, sizeof(adslAtucPhysEntry));
-                       kfree(pts.adslAtucPhysEntry_pt);
-                       
-                       up(&mei_sema);
-                       break;
-               case GET_ADSL_ATUR_PHY:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       pts.adslAturPhysEntry_pt = (adslAturPhysEntry *)kmalloc(sizeof(adslAturPhysEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAturPhysEntry_pt, (char *)lon, sizeof(adslAturPhysEntry));
-                       if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG)){
-                               ATUR_PHY_SER_NUM_FLAG_MAKECMV1;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 62 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG);  
-                               }
-                               else{
-                                       memcpy(pts.adslAturPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                               ATUR_PHY_SER_NUM_FLAG_MAKECMV2;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 62 Index 12");
-#endif
-                                       CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG);  
-                               }
-                               else{
-                                       memcpy((pts.adslAturPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               } 
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG)){
-                               ATUR_PHY_VENDOR_ID_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 65 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG);        
-                               }       
-                               else{
-                                       memcpy(pts.adslAturPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG)){
-                               ATUR_PHY_VER_NUM_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 61 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG);  
-                               }       
-                               else{
-                                       memcpy(pts.adslAturPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG)){
-                               ATUR_SNRMGN_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 68 Index 4");
-#endif
-                                       CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG);       
-                               }       
-                               else{
-                                       memcpy((&(pts.adslAturPhysEntry_pt->SnrMgn)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG)){
-                               ATUR_ATTN_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 68 Index 2");
-#endif
-                                       CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG); 
-                               }       
-                               else{
-                                       memcpy((&(pts.adslAturPhysEntry_pt->Attn)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_STAT_FLAG)){
-                               pts.adslAturPhysEntry_pt->status = CurrStatus.adslAturCurrStatus;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG)){
-                               ATUR_CURR_OUT_PWR_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 69 Index 5");
-#endif
-                                       CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG); 
-                               }       
-                               else{
-                                       memcpy((&(pts.adslAturPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG)){
-                               ATUR_CURR_ATTR_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 68 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG);    
-                               }       
-                               else{
-                                       memcpy((&(pts.adslAturPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                               }
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslAturPhysEntry_pt, sizeof(adslAturPhysEntry));
-                       kfree(pts.adslAturPhysEntry_pt);
-                       
-                       up(&mei_sema);
-                       break;
-               case GET_ADSL_ATUC_CHAN_INFO:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       pts.adslAtucChanInfo_pt = (adslAtucChanInfo *)kmalloc(sizeof(adslAtucChanInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAtucChanInfo_pt, (char *)lon, sizeof(adslAtucChanInfo));
-                       if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG)){
-                               if((chantype.interleave!=1) || (chantype.fast==1)){
-                                       CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG);
-                               }
-                               else{
-                                       ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 6 Address 3 Index 1");
-#endif
-                                               CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG);      
-                                       }       
-                                       else{
-                                               memcpy((&(pts.adslAtucChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                                       }
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG)){
-                               ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 6 Address 1 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG);     
-                               }       
-                               else{
-                                       pts.adslAtucChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_PREV_TX_RATE_FLAG)){
-                               pts.adslAtucChanInfo_pt->prevTxRate = PrevTxRate.adslAtucChanPrevTxRate;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslAtucChanInfo_pt, sizeof(adslAtucChanInfo));
-                       kfree(pts.adslAtucChanInfo_pt);
-                       
-                       up(&mei_sema);
-                       break;
-               case GET_ADSL_ATUR_CHAN_INFO:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       pts.adslAturChanInfo_pt = (adslAturChanInfo *)kmalloc(sizeof(adslAturChanInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAturChanInfo_pt, (char *)lon, sizeof(adslAturChanInfo));
-                       if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG)){
-                               if((chantype.interleave!=1) || (chantype.fast==1)){
-                                       CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG);
-                               }
-                               else{
-                                       ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 6 Address 2 Index 1");
-#endif
-                                               CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG);      
-                                       }       
-                                       else{
-                                               memcpy((&(pts.adslAturChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2));
-                                       }
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG)){
-                               ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 6 Address 0 Index 0");
-#endif
-                                       CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG);     
-                               }       
-                               else{
-                                       pts.adslAturChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_PREV_TX_RATE_FLAG)){
-                               pts.adslAturChanInfo_pt->prevTxRate = PrevTxRate.adslAturChanPrevTxRate;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG)){
-                               // ? no CMV to update this 
-                               CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG);
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslAturChanInfo_pt, sizeof(adslAturChanInfo));
-                       kfree(pts.adslAturChanInfo_pt);
-                       
-                       up(&mei_sema);
-                       break;
-               case GET_ADSL_ATUC_PERF_DATA:
-                       pts.atucPerfDataEntry_pt = (atucPerfDataEntry *)kmalloc(sizeof(atucPerfDataEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.atucPerfDataEntry_pt, (char *)lon, sizeof(atucPerfDataEntry));
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOFS_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfLofs=ATUC_PERF_LOFS;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOSS_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfLoss=ATUC_PERF_LOSS;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_ESS_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfESs=ATUC_PERF_ESS;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INITS_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfInits=ATUC_PERF_INITS;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_VALID_INTVLS_FLAG)){
-                               i=0;
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }
-                               pts.atucPerfDataEntry_pt->adslAtucPerfValidIntervals=i;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INVALID_INTVLS_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfInvalidIntervals=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
-                               do_gettimeofday(&time_now);
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOFS_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLofs=current_intvl->AtucPerfLof;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOSS_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLoss=current_intvl->AtucPerfLos;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_ESS_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinESs=current_intvl->AtucPerfEs;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_INIT_FLAG)){
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinInits=current_intvl->AtucPerfInit;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
-                               i=0;            
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i+=900; 
-                               }
-                               do_gettimeofday(&time_now);
-                               i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
-                               if(i>=86400)
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i-86400;
-                               else
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i;            
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOFS_FLAG)){           
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfLof;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AtucPerfLof;
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLofs=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOSS_FLAG)){           
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfLos;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AtucPerfLos;
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLoss=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_ESS_FLAG)){            
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfEs;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AtucPerfEs;
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayESs=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_INIT_FLAG)){           
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfInit;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AtucPerfInit;
-                               pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayInits=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_MON_SEC_FLAG)){                
-                               i=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       i++;            
-                               }
-                               if(i>=96)
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=86400;
-                               else
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOFS_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfLof;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=j;
-                               else
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOSS_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfLos;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=j;
-                               else
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_ESS_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfEs;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=j;
-                               else
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_INITS_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfInit;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=j;
-                               else
-                                       pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=0;
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.atucPerfDataEntry_pt, sizeof(atucPerfDataEntry));
-                       kfree(pts.atucPerfDataEntry_pt);
-                       break;
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case GET_ADSL_ATUC_PERF_DATA_EXT:       //??? CMV mapping not available
-                       pts.atucPerfDataExtEntry_pt = (atucPerfDataExtEntry *)kmalloc(sizeof(atucPerfDataExtEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.atucPerfDataExtEntry_pt, (char *)lon, sizeof(atucPerfDataExtEntry));
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FASTR_FLAG)){
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFastR=ATUC_PERF_STAT_FASTR;
-                       }       
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FAILED_FASTR_FLAG)){
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFailedFastR=ATUC_PERF_STAT_FAILED_FASTR;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_SESL_FLAG)){
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfStatSesL=ATUC_PERF_STAT_SESL;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_UASL_FLAG)){
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfStatUasL=ATUC_PERF_STAT_UASL;
-                       }       
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FASTR_FLAG)){
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFastR=current_intvl->AtucPerfStatFastR;
-                       }       
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG)){
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFailedFastR=current_intvl->AtucPerfStatFailedFastR;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_SESL_FLAG)){
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinSesL=current_intvl->AtucPerfStatSesL;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_UASL_FLAG)){
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinUasL=current_intvl->AtucPerfStatUasL;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FASTR_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfStatFastR;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AtucPerfStatFastR;
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFastR=j;
-                       }       
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfStatFailedFastR;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AtucPerfStatFailedFastR;
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFailedFastR=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_SESL_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfStatSesL;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AtucPerfStatSesL;
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DaySesL=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_UASL_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfStatUasL;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AtucPerfStatUasL;
-                               pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayUasL=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FASTR_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfStatFastR;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=j;
-                               else
-                                       pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=0;
-                       }       
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfStatFailedFastR;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=j;
-                               else
-                                       pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_SESL_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfStatSesL;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=j;
-                               else
-                                       pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_UASL_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AtucPerfStatUasL;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=j;
-                               else
-                                       pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=0;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.atucPerfDataExtEntry_pt, sizeof(atucPerfDataExtEntry));
-                       kfree(pts.atucPerfDataExtEntry_pt);
-                       break;
-#endif
-               case GET_ADSL_ATUR_PERF_DATA:
-                       pts.aturPerfDataEntry_pt = (aturPerfDataEntry *)kmalloc(sizeof(aturPerfDataEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.aturPerfDataEntry_pt, (char *)lon, sizeof(aturPerfDataEntry));
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOFS_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfLofs=ATUR_PERF_LOFS;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOSS_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfLoss=ATUR_PERF_LOSS;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LPR_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfLprs=ATUR_PERF_LPR;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_ESS_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfESs=ATUR_PERF_ESS;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_VALID_INTVLS_FLAG)){
-                               i=0;
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }
-                               pts.aturPerfDataEntry_pt->adslAturPerfValidIntervals=i;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_INVALID_INTVLS_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfInvalidIntervals=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
-                               do_gettimeofday(&time_now);
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOFS_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLofs=current_intvl->AturPerfLof;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOSS_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLoss=current_intvl->AturPerfLos;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LPR_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLprs=current_intvl->AturPerfLpr;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_ESS_FLAG)){
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinESs=current_intvl->AturPerfEs;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
-                               i=0;            
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i+=900; 
-                               }
-                               do_gettimeofday(&time_now);
-                               i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
-                               if(i>=86400)
-                                       pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i-86400;
-                               else
-                                       pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i;            
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOFS_FLAG)){           
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfLof;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturPerfLof;
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLofs=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOSS_FLAG)){           
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfLos;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturPerfLos;
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLoss=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LPR_FLAG)){            
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfLpr;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturPerfLpr;
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLprs=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_ESS_FLAG)){            
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfEs;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturPerfEs;
-                               pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayESs=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_MON_SEC_FLAG)){                
-                               i=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       i++;            
-                               }
-                               if(i>=96)
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=86400;
-                               else
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOFS_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfLof;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=j;
-                               else
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOSS_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfLos;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=j;
-                               else
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LPR_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfLpr;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=j;
-                               else
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_ESS_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfEs;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=j;
-                               else
-                                       pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=0;
-                       }               
-                       
-                       copy_to_user((char *)lon, (char *)pts.aturPerfDataEntry_pt, sizeof(aturPerfDataEntry));
-                       kfree(pts.aturPerfDataEntry_pt);
-                       break;
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case GET_ADSL_ATUR_PERF_DATA_EXT:
-                       pts.aturPerfDataExtEntry_pt = (aturPerfDataExtEntry *)kmalloc(sizeof(aturPerfDataExtEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.aturPerfDataExtEntry_pt, (char *)lon, sizeof(aturPerfDataExtEntry));
-                       if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_SESL_FLAG)){
-                               pts.aturPerfDataExtEntry_pt->adslAturPerfStatSesL=ATUR_PERF_STAT_SESL;
-                       }       
-                       if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_UASL_FLAG)){
-                               pts.aturPerfDataExtEntry_pt->adslAturPerfStatUasL=ATUR_PERF_STAT_UASL;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_SESL_FLAG)){
-                               pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinSesL=current_intvl->AturPerfStatSesL;
-                       }       
-                       if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_UASL_FLAG)){
-                               pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinUasL=current_intvl->AturPerfStatUasL;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_SESL_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfStatSesL;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturPerfStatSesL;
-                               pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DaySesL=j;        
-                       }       
-                       if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_UASL_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfStatUasL;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturPerfStatUasL;
-                               pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DayUasL=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_SESL_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfStatSesL;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=j;
-                               else
-                                       pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=0;        
-                       }       
-                       if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_UASL_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturPerfStatUasL;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=j;
-                               else
-                                       pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=0;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.aturPerfDataExtEntry_pt, sizeof(aturPerfDataExtEntry));
-                       kfree(pts.aturPerfDataExtEntry_pt);
-                       break;
-#endif
-               case GET_ADSL_ATUC_INTVL_INFO:
-                       pts.adslAtucIntvlInfo_pt = (adslAtucIntvlInfo *)kmalloc(sizeof(adslAtucIntvlInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAtucIntvlInfo_pt, (char *)lon, sizeof(adslAtucIntvlInfo));
-                       
-                       if(pts.adslAtucIntvlInfo_pt->IntervalNumber <1){
-                               pts.adslAtucIntvlInfo_pt->intervalLOF = ATUC_PERF_LOFS;
-                               pts.adslAtucIntvlInfo_pt->intervalLOS = ATUC_PERF_LOSS;
-                               pts.adslAtucIntvlInfo_pt->intervalES = ATUC_PERF_ESS;
-                               pts.adslAtucIntvlInfo_pt->intervalInits = ATUC_PERF_INITS;
-                               pts.adslAtucIntvlInfo_pt->intervalValidData = 1;        
-                       }
-                       else{
-                               i=0;
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i++;
-                                       if(i==pts.adslAtucIntvlInfo_pt->IntervalNumber){
-                                               temp_intvl = list_entry(ptr, amazon_mei_mib, list);
-                                               pts.adslAtucIntvlInfo_pt->intervalLOF = temp_intvl->AtucPerfLof;
-                                               pts.adslAtucIntvlInfo_pt->intervalLOS = temp_intvl->AtucPerfLos;
-                                               pts.adslAtucIntvlInfo_pt->intervalES = temp_intvl->AtucPerfEs;
-                                               pts.adslAtucIntvlInfo_pt->intervalInits = temp_intvl->AtucPerfInit;
-                                               pts.adslAtucIntvlInfo_pt->intervalValidData = 1;
-                                               break;
-                                       }               
-                               }
-                               if(ptr==&interval_list){
-                                       pts.adslAtucIntvlInfo_pt->intervalValidData = 0;
-                                       pts.adslAtucIntvlInfo_pt->flags = 0;
-                                       pts.adslAtucIntvlInfo_pt->intervalLOF = 0;
-                                       pts.adslAtucIntvlInfo_pt->intervalLOS = 0;
-                                       pts.adslAtucIntvlInfo_pt->intervalES = 0;
-                                       pts.adslAtucIntvlInfo_pt->intervalInits = 0;    
-                               }
-                       }
-                                                                       
-                       copy_to_user((char *)lon, (char *)pts.adslAtucIntvlInfo_pt, sizeof(adslAtucIntvlInfo));
-                       kfree(pts.adslAtucIntvlInfo_pt);
-                       break;
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case GET_ADSL_ATUC_INTVL_EXT_INFO:
-                       pts.adslAtucInvtlExtInfo_pt = (adslAtucInvtlExtInfo *)kmalloc(sizeof(adslAtucInvtlExtInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAtucInvtlExtInfo_pt, (char *)lon, sizeof(adslAtucInvtlExtInfo));
-                       if(pts.adslAtucInvtlExtInfo_pt->IntervalNumber <1){
-                               pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = ATUC_PERF_STAT_FASTR;
-                               pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = ATUC_PERF_STAT_FAILED_FASTR;
-                               pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = ATUC_PERF_STAT_SESL;
-                               pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = ATUC_PERF_STAT_UASL;
-//                             pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1;     
-                       }
-                       else{
-                               i=0;
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i++;
-                                       if(i==pts.adslAtucInvtlExtInfo_pt->IntervalNumber){
-                                               temp_intvl = list_entry(ptr, amazon_mei_mib, list);
-                                               pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = temp_intvl->AtucPerfStatFastR;
-                                               pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = temp_intvl->AtucPerfStatFailedFastR;
-                                               pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = temp_intvl->AtucPerfStatSesL;
-                                               pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = temp_intvl->AtucPerfStatUasL;
-//                                             pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1;
-                                               break;
-                                       }               
-                               } 
-                               if(ptr==&interval_list){
-//                                     pts.adslAtucInvtlExtInfo_pt->intervalValidData = 0;
-                                       pts.adslAtucInvtlExtInfo_pt->flags = 0; 
-                                       pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = 0;
-                                       pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = 0;
-                                       pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = 0;
-                                       pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = 0;
-                               }
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslAtucInvtlExtInfo_pt, sizeof(adslAtucInvtlExtInfo));
-                       kfree(pts.adslAtucInvtlExtInfo_pt);
-                       break;
-#endif
-               case GET_ADSL_ATUR_INTVL_INFO:
-                       pts.adslAturIntvlInfo_pt = (adslAturIntvlInfo *)kmalloc(sizeof(adslAturIntvlInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAturIntvlInfo_pt, (char *)lon, sizeof(adslAturIntvlInfo));
-                       
-                       if(pts.adslAturIntvlInfo_pt->IntervalNumber <1){
-                               pts.adslAturIntvlInfo_pt->intervalLOF = ATUR_PERF_LOFS;
-                               pts.adslAturIntvlInfo_pt->intervalLOS = ATUR_PERF_LOSS;
-                               pts.adslAturIntvlInfo_pt->intervalES = ATUR_PERF_ESS;
-                               pts.adslAturIntvlInfo_pt->intervalLPR = ATUR_PERF_LPR;
-                               pts.adslAturIntvlInfo_pt->intervalValidData = 1;        
-                       }
-                       else{
-                               i=0;
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i++;
-                                       if(i==pts.adslAturIntvlInfo_pt->IntervalNumber){
-                                               temp_intvl = list_entry(ptr, amazon_mei_mib, list);
-                                               pts.adslAturIntvlInfo_pt->intervalLOF = temp_intvl->AturPerfLof;
-                                               pts.adslAturIntvlInfo_pt->intervalLOS = temp_intvl->AturPerfLos;
-                                               pts.adslAturIntvlInfo_pt->intervalES = temp_intvl->AturPerfEs;
-                                               pts.adslAturIntvlInfo_pt->intervalLPR = temp_intvl->AturPerfLpr;
-                                               pts.adslAturIntvlInfo_pt->intervalValidData = 1;
-                                               break;
-                                       }               
-                               }
-                               if(ptr==&interval_list){
-                                       pts.adslAturIntvlInfo_pt->intervalValidData = 0;
-                                       pts.adslAturIntvlInfo_pt->flags = 0;
-                                       pts.adslAturIntvlInfo_pt->intervalLOF = 0;
-                                       pts.adslAturIntvlInfo_pt->intervalLOS = 0;
-                                       pts.adslAturIntvlInfo_pt->intervalES = 0;
-                                       pts.adslAturIntvlInfo_pt->intervalLPR = 0;      
-                               }
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.adslAturIntvlInfo_pt, sizeof(adslAturIntvlInfo));
-                       kfree(pts.adslAturIntvlInfo_pt);
-                       break;
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case GET_ADSL_ATUR_INTVL_EXT_INFO:
-                       pts.adslAturInvtlExtInfo_pt = (adslAturInvtlExtInfo *)kmalloc(sizeof(adslAturInvtlExtInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAturInvtlExtInfo_pt, (char *)lon, sizeof(adslAturInvtlExtInfo));
-                       
-                       if(pts.adslAturInvtlExtInfo_pt->IntervalNumber <1){
-                               pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = ATUR_PERF_STAT_SESL;
-                               pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = ATUR_PERF_STAT_UASL;
-//                             pts.adslAturInvtlExtInfo_pt->intervalValidData = 1;
-                       }
-                       else{
-                               i=0;
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i++;
-                                       if(i==pts.adslAturInvtlExtInfo_pt->IntervalNumber){
-                                               temp_intvl = list_entry(ptr, amazon_mei_mib, list);
-                                               pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = temp_intvl->AturPerfStatSesL;
-                                               pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = temp_intvl->AturPerfStatUasL;
-//                                             pts.adslAturInvtlExtInfo_pt->intervalValidData = 1;
-                                               break; 
-                                       }               
-                               }
-                               if(ptr==&interval_list){
-//                                     pts.adslAturInvtlExtInfo_pt->intervalValidData = 0;
-                                       pts.adslAturInvtlExtInfo_pt->flags = 0; 
-                                       pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = 0;
-                                       pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = 0; 
-                               }
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.adslAturInvtlExtInfo_pt, sizeof(adslAturInvtlExtInfo));
-                       kfree(pts.adslAturInvtlExtInfo_pt);
-                       break;
-#endif
-               case GET_ADSL_ATUC_CHAN_PERF_DATA:
-                       pts.atucChannelPerfDataEntry_pt = (atucChannelPerfDataEntry *)kmalloc(sizeof(atucChannelPerfDataEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.atucChannelPerfDataEntry_pt, (char *)lon, sizeof(atucChannelPerfDataEntry));
-       
-                       pts.atucChannelPerfDataEntry_pt->flags = 0;
-                       
-                       copy_to_user((char *)lon, (char *)pts.atucChannelPerfDataEntry_pt, sizeof(atucChannelPerfDataEntry));
-                       kfree(pts.atucChannelPerfDataEntry_pt);
-                       break;
-               case GET_ADSL_ATUR_CHAN_PERF_DATA:
-                       pts.aturChannelPerfDataEntry_pt = (aturChannelPerfDataEntry *)kmalloc(sizeof(aturChannelPerfDataEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.aturChannelPerfDataEntry_pt, (char *)lon, sizeof(aturChannelPerfDataEntry));
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_RECV_BLK_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanReceivedBlks=ATUR_CHAN_RECV_BLK;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_TX_BLK_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanTransmittedBlks=ATUR_CHAN_TX_BLK;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_CORR_BLK_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanCorrectedBlks=ATUR_CHAN_CORR_BLK;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_UNCORR_BLK_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanUncorrectBlks=ATUR_CHAN_UNCORR_BLK;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_VALID_INTVL_FLAG)){
-                               i=0;
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfValidIntervals=i;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_INVALID_INTVL_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfInvalidIntervals=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
-                               do_gettimeofday(&time_now);
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinReceivedBlks=current_intvl->AturChanPerfRxBlk;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTransmittedBlks=current_intvl->AturChanPerfTxBlk;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinCorrectedBlks=current_intvl->AturChanPerfCorrBlk;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG)){
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinUncorrectBlks=current_intvl->AturChanPerfUncorrBlk;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
-                               i=0;            
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i+=900; 
-                               }
-                               do_gettimeofday(&time_now);
-                               i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
-                               if(i>=86400)
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i-86400;
-                               else
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i;         
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG)){           
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturChanPerfRxBlk;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturChanPerfRxBlk;
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayReceivedBlks=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG)){             
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturChanPerfTxBlk;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturChanPerfTxBlk;
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTransmittedBlks=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG)){           
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturChanPerfCorrBlk;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturChanPerfCorrBlk;
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayCorrectedBlks=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG)){         
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturChanPerfUncorrBlk;
-                                       i++;    
-                                       if(i==96)
-                                               j=0;
-                               }
-                               j+=current_intvl->AturChanPerfUncorrBlk;
-                               pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayUncorrectBlks=j;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG)){           
-                               i=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       i++;            
-                               }
-                               if(i>=96)
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=86400;
-                               else
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturChanPerfRxBlk;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=j;
-                               else
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturChanPerfTxBlk;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=j;
-                               else
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturChanPerfCorrBlk;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=j;
-                               else
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=0;
-                       }
-                       if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG)){
-                               i=0;
-                               j=0;
-                               for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
-                                       mib_ptr = list_entry(ptr, amazon_mei_mib, list);
-                                       j+=mib_ptr->AturChanPerfUncorrBlk;
-                                       i++;
-                                       if(i==96)
-                                               break;
-                               }       
-                               if(i==96)
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=j;
-                               else
-                                       pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=0;
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.aturChannelPerfDataEntry_pt, sizeof(aturChannelPerfDataEntry));
-                       kfree(pts.aturChannelPerfDataEntry_pt);
-                       break;
-               case GET_ADSL_ATUC_CHAN_INTVL_INFO:
-                       pts.adslAtucChanIntvlInfo_pt = (adslAtucChanIntvlInfo *)kmalloc(sizeof(adslAtucChanIntvlInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAtucChanIntvlInfo_pt, (char *)lon, sizeof(adslAtucChanIntvlInfo));
-                               
-                               pts.adslAtucChanIntvlInfo_pt->flags = 0;
-                               
-                       copy_to_user((char *)lon, (char *)pts.adslAtucChanIntvlInfo_pt, sizeof(adslAtucChanIntvlInfo));
-                       kfree(pts.adslAtucChanIntvlInfo_pt);
-                       break;
-               case GET_ADSL_ATUR_CHAN_INTVL_INFO:
-                       pts.adslAturChanIntvlInfo_pt = (adslAturChanIntvlInfo *)kmalloc(sizeof(adslAturChanIntvlInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslAturChanIntvlInfo_pt, (char *)lon, sizeof(adslAturChanIntvlInfo));
-                       
-                       if(pts.adslAturChanIntvlInfo_pt->IntervalNumber <1){
-                               pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = ATUR_CHAN_RECV_BLK;
-                               pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = ATUR_CHAN_TX_BLK;
-                               pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = ATUR_CHAN_CORR_BLK;
-                               pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = ATUR_CHAN_UNCORR_BLK;
-                               pts.adslAturChanIntvlInfo_pt->intervalValidData = 1;
-                       }
-                       else{
-                               i=0;
-                               for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
-                                       i++;
-                                       if(i==pts.adslAturChanIntvlInfo_pt->IntervalNumber){
-                                               temp_intvl = list_entry(ptr, amazon_mei_mib, list);
-                                               pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = temp_intvl->AturChanPerfRxBlk;
-                                               pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = temp_intvl->AturChanPerfTxBlk;
-                                               pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = temp_intvl->AturChanPerfCorrBlk;
-                                               pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = temp_intvl->AturChanPerfUncorrBlk;
-                                               pts.adslAturChanIntvlInfo_pt->intervalValidData = 1;
-                                               break;
-                                       }               
-                               }
-                               if(ptr==&interval_list){
-                                       pts.adslAturChanIntvlInfo_pt->intervalValidData = 0;
-                                       pts.adslAturChanIntvlInfo_pt->flags = 0;        
-                               }
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.adslAturChanIntvlInfo_pt, sizeof(adslAturChanIntvlInfo));
-                       kfree(pts.adslAturChanIntvlInfo_pt);
-                       break;
-               case GET_ADSL_ALRM_CONF_PROF:
-                       pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry));
-                       
-                       strncpy(pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, AlarmConfProfile.adslLineAlarmConfProfileName, 32); 
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs=AlarmConfProfile.adslAtucThresh15MinLofs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss=AlarmConfProfile.adslAtucThresh15MinLoss;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs=AlarmConfProfile.adslAtucThresh15MinESs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp=AlarmConfProfile.adslAtucThreshFastRateUp;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp=AlarmConfProfile.adslAtucThreshInterleaveRateUp;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown=AlarmConfProfile.adslAtucThreshFastRateDown;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown=AlarmConfProfile.adslAtucThreshInterleaveRateDown;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable=AlarmConfProfile.adslAtucInitFailureTrapEnable;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs=AlarmConfProfile.adslAturThresh15MinLofs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss=AlarmConfProfile.adslAturThresh15MinLoss;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs=AlarmConfProfile.adslAturThresh15MinLprs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs=AlarmConfProfile.adslAturThresh15MinESs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp=AlarmConfProfile.adslAturThreshFastRateUp;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp=AlarmConfProfile.adslAturThreshInterleaveRateUp;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown=AlarmConfProfile.adslAturThreshFastRateDown;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown=AlarmConfProfile.adslAturThreshInterleaveRateDown;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){
-                               pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus=AlarmConfProfile.adslLineAlarmConfProfileRowStatus;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry));
-                       kfree(pts.adslLineAlarmConfProfileEntry_pt);
-                       break;
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case GET_ADSL_ALRM_CONF_PROF_EXT:
-                       pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry));
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){
-                               pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){
-                               pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL=AlarmConfProfileExt.adslAtucThreshold15MinSesL;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){
-                               pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL=AlarmConfProfileExt.adslAtucThreshold15MinUasL;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){
-                               pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL=AlarmConfProfileExt.adslAturThreshold15MinSesL;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){
-                               pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL=AlarmConfProfileExt.adslAturThreshold15MinUasL;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry));
-                       kfree(pts.adslLineAlarmConfProfileExtEntry_pt);
-                       break;
-#endif
-               case SET_ADSL_ALRM_CONF_PROF:
-                       pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry));
-
-                       strncpy(AlarmConfProfile.adslLineAlarmConfProfileName, pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, 32);
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){
-                               AlarmConfProfile.adslAtucThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){
-                               AlarmConfProfile.adslAtucThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){
-                               AlarmConfProfile.adslAtucThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){
-                               AlarmConfProfile.adslAtucThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){
-                               AlarmConfProfile.adslAtucThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){
-                               AlarmConfProfile.adslAtucThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
-                               AlarmConfProfile.adslAtucThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){
-                               AlarmConfProfile.adslAtucInitFailureTrapEnable=pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){
-                               AlarmConfProfile.adslAturThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){
-                               AlarmConfProfile.adslAturThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){
-                               AlarmConfProfile.adslAturThresh15MinLprs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){
-                               AlarmConfProfile.adslAturThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){
-                               AlarmConfProfile.adslAturThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){
-                               AlarmConfProfile.adslAturThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){
-                               AlarmConfProfile.adslAturThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
-                               AlarmConfProfile.adslAturThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){
-                               AlarmConfProfile.adslLineAlarmConfProfileRowStatus=pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry));
-                       kfree(pts.adslLineAlarmConfProfileEntry_pt);
-                       break;
-                       
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case SET_ADSL_ALRM_CONF_PROF_EXT:
-                       pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry));
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){
-                               AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){
-                               AlarmConfProfileExt.adslAtucThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){
-                               AlarmConfProfileExt.adslAtucThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){
-                               AlarmConfProfileExt.adslAturThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL;
-                       }
-                       if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){
-                               AlarmConfProfileExt.adslAturThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry));
-                       kfree(pts.adslLineAlarmConfProfileExtEntry_pt);
-                       break;
-#endif
-
-               case ADSL_ATUR_TRAPS:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       trapsflag=0;
-                       if(AlarmConfProfile.adslAtucThresh15MinLofs!=0 && current_intvl->AtucPerfLof>=AlarmConfProfile.adslAtucThresh15MinLofs)
-                               trapsflag|=ATUC_PERF_LOFS_THRESH_FLAG;
-                       if(AlarmConfProfile.adslAtucThresh15MinLoss!=0 && current_intvl->AtucPerfLos>=AlarmConfProfile.adslAtucThresh15MinLoss)
-                               trapsflag|=ATUC_PERF_LOSS_THRESH_FLAG;
-                       if(AlarmConfProfile.adslAtucThresh15MinESs!=0 && current_intvl->AtucPerfEs>=AlarmConfProfile.adslAtucThresh15MinESs)
-                               trapsflag|=ATUC_PERF_ESS_THRESH_FLAG;
-                       if(chantype.fast==1){
-                               if(AlarmConfProfile.adslAtucThreshFastRateUp!=0 || AlarmConfProfile.adslAtucThreshFastRateDown!=0){
-                                       ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 6 Address 1 Index 0");
-#endif                 
-                                       }
-                                       else{
-                                               temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); 
-                                               if((AlarmConfProfile.adslAtucThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshFastRateUp)){
-                                                       trapsflag|=ATUC_RATE_CHANGE_FLAG;
-                                                       PrevTxRate.adslAtucChanPrevTxRate = temp;                                               
-                                               }
-                                               if((AlarmConfProfile.adslAtucThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshFastRateDown)){
-                                                       trapsflag|=ATUC_RATE_CHANGE_FLAG;
-                                                       PrevTxRate.adslAtucChanPrevTxRate = temp;                                               
-                                               }
-                                       }
-                               }
-                       }       
-                       if(chantype.interleave==1){
-                               if(AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0){
-                                       ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 6 Address 1 Index 0");
-#endif                 
-                                       }
-                                       else{
-                                               temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); 
-                                               if((AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshInterleaveRateUp)){
-                                                       trapsflag|=ATUC_RATE_CHANGE_FLAG;
-                                                       PrevTxRate.adslAtucChanPrevTxRate = temp;                                               
-                                               }
-                                               if((AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshInterleaveRateDown)){
-                                                       trapsflag|=ATUC_RATE_CHANGE_FLAG;
-                                                       PrevTxRate.adslAtucChanPrevTxRate = temp;                                               
-                                               }
-                                       }
-                               }
-                       }       
-                       if(AlarmConfProfile.adslAturThresh15MinLofs!=0 && current_intvl->AturPerfLof>=AlarmConfProfile.adslAturThresh15MinLofs)
-                               trapsflag|=ATUR_PERF_LOFS_THRESH_FLAG;
-                       if(AlarmConfProfile.adslAturThresh15MinLoss!=0 && current_intvl->AturPerfLos>=AlarmConfProfile.adslAturThresh15MinLoss)
-                               trapsflag|=ATUR_PERF_LOSS_THRESH_FLAG;
-                       if(AlarmConfProfile.adslAturThresh15MinLprs!=0 && current_intvl->AturPerfLpr>=AlarmConfProfile.adslAturThresh15MinLprs)
-                               trapsflag|=ATUR_PERF_LPRS_THRESH_FLAG;
-                       if(AlarmConfProfile.adslAturThresh15MinESs!=0 && current_intvl->AturPerfEs>=AlarmConfProfile.adslAturThresh15MinESs)
-                               trapsflag|=ATUR_PERF_ESS_THRESH_FLAG;   
-                       if(chantype.fast==1){
-                               if(AlarmConfProfile.adslAturThreshFastRateUp!=0 || AlarmConfProfile.adslAturThreshFastRateDown!=0){
-                                       ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 6 Address 0 Index 0");
-#endif                 
-                                       }
-                                       else{
-                                               temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); 
-                                               if((AlarmConfProfile.adslAturThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshFastRateUp)){
-                                                       trapsflag|=ATUR_RATE_CHANGE_FLAG;
-                                                       PrevTxRate.adslAturChanPrevTxRate = temp;                                               
-                                               }
-                                               if((AlarmConfProfile.adslAturThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshFastRateDown)){
-                                                       trapsflag|=ATUR_RATE_CHANGE_FLAG;
-                                                       PrevTxRate.adslAturChanPrevTxRate = temp;                                               
-                                               }
-                                       }
-                               }
-                       }       
-                       if(chantype.interleave==1){
-                               if(AlarmConfProfile.adslAturThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAturThreshInterleaveRateDown!=0){
-                                       ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 6 Address 0 Index 0");
-#endif                 
-                                       }
-                                       else{
-                                               temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                                               if((AlarmConfProfile.adslAturThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshInterleaveRateUp)){
-                                                       trapsflag|=ATUR_RATE_CHANGE_FLAG;
-                                                       PrevTxRate.adslAturChanPrevTxRate = temp;                                               
-                                               }
-                                               if((AlarmConfProfile.adslAturThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshInterleaveRateDown)){
-                                                       trapsflag|=ATUR_RATE_CHANGE_FLAG;
-                                                       PrevTxRate.adslAturChanPrevTxRate = temp;                                               
-                                               }
-                                       }
-                               }
-                       }       
-                       copy_to_user((char *)lon, (char *)(&trapsflag), 2);
-                       
-                       up(&mei_sema);  
-                       break;
-                       
-#ifdef AMAZON_MEI_MIB_RFC3440
-               case ADSL_ATUR_EXT_TRAPS:
-                       trapsflag=0;
-                       if(AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR!=0 && current_intvl->AtucPerfStatFailedFastR>=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR)
-                               trapsflag|=ATUC_15MIN_FAILED_FASTR_TRAP_FLAG;
-                       if(AlarmConfProfileExt.adslAtucThreshold15MinSesL!=0 && current_intvl->AtucPerfStatSesL>=AlarmConfProfileExt.adslAtucThreshold15MinSesL)
-                               trapsflag|=ATUC_15MIN_SESL_TRAP_FLAG;
-                       if(AlarmConfProfileExt.adslAtucThreshold15MinUasL!=0 && current_intvl->AtucPerfStatUasL>=AlarmConfProfileExt.adslAtucThreshold15MinUasL)
-                               trapsflag|=ATUC_15MIN_UASL_TRAP_FLAG;
-                       if(AlarmConfProfileExt.adslAturThreshold15MinSesL!=0 && current_intvl->AturPerfStatSesL>=AlarmConfProfileExt.adslAturThreshold15MinSesL)
-                               trapsflag|=ATUR_15MIN_SESL_TRAP_FLAG;
-                       if(AlarmConfProfileExt.adslAturThreshold15MinUasL!=0 && current_intvl->AturPerfStatUasL>=AlarmConfProfileExt.adslAturThreshold15MinUasL)
-                               trapsflag|=ATUR_15MIN_UASL_TRAP_FLAG;
-                       copy_to_user((char *)lon, (char *)(&trapsflag), 2);
-                       break;
-#endif
-
-// 603221:tc.chen start
-               case GET_ADSL_LINE_STATUS:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       pts.adslLineStatusInfo_pt = (adslLineStatusInfo *)kmalloc(sizeof(adslLineStatusInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineStatusInfo_pt, (char *)lon, sizeof(adslLineStatusInfo));
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODEM_STATUS_FLAG)){
-                               LINE_STAT_MODEM_STATUS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group STAT Address 0 Index 0");
-#endif
-                                       pts.adslLineStatusInfo_pt->adslModemStatus = 0; 
-                               }
-                               else{
-                                       pts.adslLineStatusInfo_pt->adslModemStatus = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODE_SEL_FLAG)){
-                               LINE_STAT_MODE_SEL_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-                                       pts.adslLineStatusInfo_pt->adslModeSelected = 0;        
-                               }
-                               else{
-                                       pts.adslLineStatusInfo_pt->adslModeSelected = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_TRELLCOD_ENABLE_FLAG)){
-                               LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group OPTN Address 2 Index 0");
-#endif
-                                       pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = 0;   
-                               }
-                               else{
-                                       
-                                       pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = (RxMessage[4]>>13)&0x1==0x1?0:1;
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_LATENCY_FLAG)){
-                               LINE_STAT_LATENCY_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group STAT Address 12 Index 0");
-#endif
-                                       pts.adslLineStatusInfo_pt->adslLatency = 0;     
-                               }
-                               else{
-                                       pts.adslLineStatusInfo_pt->adslLatency = RxMessage[4];
-                               }
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.adslLineStatusInfo_pt, sizeof(adslLineStatusInfo));
-                       kfree(pts.adslLineStatusInfo_pt);
-                       
-                       up(&mei_sema);
-                       break;
-
-
-               case GET_ADSL_LINE_RATE:
-                       if (showtime!=1)
-                               return -ERESTARTSYS;
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       pts.adslLineRateInfo_pt = (adslLineRateInfo *)kmalloc(sizeof(adslLineRateInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineRateInfo_pt, (char *)lon, sizeof(adslLineRateInfo));
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEDS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
-                               {
-                                       if (chantype.interleave)
-                                               LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV;
-                                       else
-                                               LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV;
-                                               
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group RATE Address 1 Index 0");
-#endif
-                                               pts.adslLineRateInfo_pt->adslDataRateds = 0;    
-                                       }
-                                       else{
-                                               pts.adslLineRateInfo_pt->adslDataRateds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                                       }               
-                               }else  // adsl 2/2+
-                               {
-                                       unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain;
-                                       Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0;
-                                       //// up stream data rate
-                                         
-                                           if (chantype.interleave)
-                                           {
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 25 Index 0");
-#endif
-                                                       Lp = 0; 
-                                                   }else
-                                                       Lp=RxMessage[4];
-                                  
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 23 Index 0");
-#endif
-                                                       Rp = 0; 
-                                                   }else
-                                                       Rp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 24 Index 0");
-#endif
-                                                       Mp = 0; 
-                                                   }else
-                                                       Mp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 26 Index 0");
-#endif
-                                                       Tp = 0; 
-                                                   }else
-                                                       Tp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 28 Index 0");
-#endif
-                                                       Kp = 0; 
-                                                   }else
-                                                   {
-                                                       Kp=RxMessage[4]+ RxMessage[5]+1;
-                                                       Bpn=RxMessage[4]+ RxMessage[5];
-                                                   }
-                                           }else
-                                           {
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 25 Index 1");
-#endif
-                                                       Lp = 0; 
-                                                   }else
-                                                       Lp=RxMessage[4];
-                                  
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 23 Index 1");
-#endif
-                                                       Rp = 0; 
-                                                   }else
-                                                       Rp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 24 Index 1");
-#endif
-                                                       Mp = 0; 
-                                                   }else
-                                                       Mp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 26 Index 1");
-#endif
-                                                       Tp = 0; 
-                                                   }else
-                                                       Tp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 28 Index 2");
-#endif
-                                                       Kp = 0; 
-                                                   }else
-                                                   {
-                                                       Kp=RxMessage[4]+ RxMessage[5]+1;
-                                                       Bpn=RxMessage[4]+ RxMessage[5];
-                                                   }
-                                           }
-                                           DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp));
-                                           //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp));
-                                           //pts.adslLineRateInfo_pt->adslDataRateds = DataRate * 1000 + DataRate_remain;
-                                           pts.adslLineRateInfo_pt->adslDataRateds = DataRate;
-                               }               
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEUS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
-                               {
-                                       if (chantype.interleave)
-                                               LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV;
-                                       else
-                                               LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV;
-                                               
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-       #ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group RATE Address 0 Index 0");
-       #endif
-                                               pts.adslLineRateInfo_pt->adslDataRateus = 0;    
-                                       }
-                                       else{
-                                               pts.adslLineRateInfo_pt->adslDataRateus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                                       }               
-                               }else  // adsl 2/2+
-                               {
-                                       unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain;
-                                       Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0;
-                                       //// down stream data rate
-                                          
-                                           if (chantype.interleave)
-                                           {
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 14 Index 0");
-#endif
-                                                       Lp = 0; 
-                                                   }else
-                                                       Lp=RxMessage[4];
-                                  
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 12 Index 0");
-#endif
-                                                       Rp = 0; 
-                                                   }else
-                                                       Rp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 13 Index 0");
-#endif
-                                                       Mp = 0; 
-                                                   }else
-                                                       Mp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 15 Index 0");
-#endif
-                                                       Tp = 0; 
-                                                   }else
-                                                       Tp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 17 Index 0");
-#endif
-                                                       Kp = 0; 
-                                                   }else
-                                                   {
-                                                       Kp=RxMessage[4]+ RxMessage[5]+1;
-                                                       Bpn=RxMessage[4]+ RxMessage[5];
-                                                   }
-                                           }else
-                                           {
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 14 Index 1");
-#endif
-                                                       Lp = 0; 
-                                                   }else
-                                                       Lp=RxMessage[4];
-                                  
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 12 Index 1");
-#endif
-                                                       Rp = 0; 
-                                                   }else
-                                                       Rp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 13 Index 1");
-#endif
-                                                       Mp = 0; 
-                                                   }else
-                                                       Mp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 15 Index 1");
-#endif
-                                                       Tp = 0; 
-                                                   }else
-                                                       Tp=RxMessage[4];
-                               
-                                                   LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV;
-                                                   if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group CNFG Address 17 Index 2");
-#endif
-                                                       Kp = 0; 
-                                                   }else
-                                                   {
-                                                       Kp=RxMessage[4]+ RxMessage[5]+1;
-                                                       Bpn=RxMessage[4]+ RxMessage[5];
-                                                   }
-                                           }
-                                           DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp));
-                                           //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp));
-                                           //pts.adslLineRateInfo_pt->adslDataRateus = DataRate * 1000 + DataRate_remain;
-                                           pts.adslLineRateInfo_pt->adslDataRateus = DataRate;
-                               }               
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRDS_FLAG)){
-                               LINE_RATE_ATTNDRDS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group INFO Address 68 Index 4");
-#endif
-                                       pts.adslLineRateInfo_pt->adslATTNDRds = 0;      
-                               }
-                               else{
-                                       pts.adslLineRateInfo_pt->adslATTNDRds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRUS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
-                               {
-                                       LINE_RATE_ATTNDRUS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-       #ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 69 Index 4");
-       #endif
-                                               pts.adslLineRateInfo_pt->adslATTNDRus = 0;      
-                                       }
-                                       else{
-                                               pts.adslLineRateInfo_pt->adslATTNDRus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                                       }
-                               }else
-                               {
-                                       hdlc_cmd[0]=0x0181;
-                                       hdlc_cmd[1]=0x24;
-                                       up(&mei_sema);
-                                       if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
-                                       {
-                                               set_current_state(TASK_INTERRUPTIBLE);
-                                               schedule_timeout(1);            
-                                               hdlc_rx_len=0;                  
-                                               hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
-                                               if (hdlc_rx_len <=0)
-                                               {
-                                                       meierr = -ERESTARTSYS;
-                                                       goto GET_ADSL_LINE_RATE_END;
-                                               }
-                                               pts.adslLineRateInfo_pt->adslATTNDRus = (u32)le16_to_cpu(hdlc_rx_buffer[1])<<16 | (u32)le16_to_cpu(hdlc_rx_buffer[2]);
-                                       }
-                                       if(down_interruptible(&mei_sema))
-                                       {
-                                               meierr = -ERESTARTSYS;
-                                               goto GET_ADSL_LINE_RATE_END;
-                                       }
-                               }
-                       }       
-                       copy_to_user((char *)lon, (char *)pts.adslLineRateInfo_pt, sizeof(adslLineRateInfo));
-                       up(&mei_sema);
-                       
-GET_ADSL_LINE_RATE_END:                                                
-                       kfree(pts.adslLineRateInfo_pt);
-                       break;
-
-               case GET_ADSL_LINE_INFO:
-                       if (showtime!=1)
-                               return -ERESTARTSYS;
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       pts.adslLineInfo_pt = (adslLineInfo *)kmalloc(sizeof(adslLineInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslLineInfo_pt, (char *)lon, sizeof(adslLineInfo));
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHDS_FLAG)){
-                               if (chantype.interleave)
-                                       LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV;
-                               else
-                                       LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV;
-                                       
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group CNFG Address 27 Index 0");
-#endif
-                                       pts.adslLineInfo_pt->adslInterleaveDepthds = 0; 
-                               }
-                               else{
-                                       pts.adslLineInfo_pt->adslInterleaveDepthds = RxMessage[4];
-                               }                               
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHUS_FLAG)){
-                               if (chantype.interleave)
-                                       LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV;
-                               else
-                                       LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV;
-                                       
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group CNFG Address 16 Index 0");
-#endif
-                                       pts.adslLineInfo_pt->adslInterleaveDepthus = 0; 
-                               }
-                               else{
-                                       pts.adslLineInfo_pt->adslInterleaveDepthus = RxMessage[4];
-                               }                               
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNDS_FLAG)){
-                               LINE_INFO_LATNDS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group INFO Address 68 Index 1");
-#endif
-                                       pts.adslLineInfo_pt->adslLATNds = 0;    
-                               }
-                               else{
-                                       pts.adslLineInfo_pt->adslLATNds = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNUS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
-                               {
-                                       LINE_INFO_LATNUS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 69 Index 1");
-#endif
-                                               pts.adslLineInfo_pt->adslLATNus = 0;    
-                                       }
-                                       else{
-                                               pts.adslLineInfo_pt->adslLATNus = RxMessage[4];
-                                       }
-                               }else
-                               {
-                                       hdlc_cmd[0]=0x0181;
-                                       hdlc_cmd[1]=0x21;
-                                       up(&mei_sema);
-                                       if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
-                                       {
-                                               set_current_state(TASK_INTERRUPTIBLE);
-                                               schedule_timeout(1);            
-                                               hdlc_rx_len=0;                  
-                                               hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
-                                               if (hdlc_rx_len <=0)
-                                               {
-                                                       meierr = -ERESTARTSYS;
-                                                       goto GET_ADSL_LINE_INFO_END;
-                                               }
-                                               pts.adslLineInfo_pt->adslLATNus = le16_to_cpu(hdlc_rx_buffer[1]);
-                                       }
-                                       if(down_interruptible(&mei_sema))
-                                       {
-                                               meierr = -ERESTARTSYS;
-                                               goto GET_ADSL_LINE_INFO_END;
-                                       }
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNDS_FLAG)){
-                               LINE_INFO_SATNDS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group INFO Address 68 Index 2");
-#endif
-                                       pts.adslLineInfo_pt->adslSATNds = 0;    
-                               }
-                               else{
-                                       pts.adslLineInfo_pt->adslSATNds = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNUS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
-                               {
-                                       LINE_INFO_SATNUS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 69 Index 2");
-#endif
-                                               pts.adslLineInfo_pt->adslSATNus = 0;    
-                                       }
-                                       else{
-                                               pts.adslLineInfo_pt->adslSATNus = RxMessage[4];
-                                       }
-                               }else
-                               {
-                                       hdlc_cmd[0]=0x0181;
-                                       hdlc_cmd[1]=0x22;
-                                       up(&mei_sema);
-                                       if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
-                                       {
-                                               set_current_state(TASK_INTERRUPTIBLE);
-                                               schedule_timeout(1);            
-                                               hdlc_rx_len=0;                  
-                                               hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
-                                               if (hdlc_rx_len <=0)
-                                               {
-                                                       meierr = -ERESTARTSYS;
-                                                       goto GET_ADSL_LINE_INFO_END;
-                                               }
-                                               pts.adslLineInfo_pt->adslSATNus = le16_to_cpu(hdlc_rx_buffer[1]);
-                                       }
-                                       if(down_interruptible(&mei_sema))
-                                       {
-                                               meierr = -ERESTARTSYS;
-                                               goto GET_ADSL_LINE_INFO_END;
-                                       }
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNDS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
-                               {
-                                       LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV;
-                               }
-                               else if ((adsl_mode == 0x4000) || (adsl_mode == 0x8000) || adsl_mode_extend > 0)
-                               {
-                                       LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV;
-                               }
-                               else
-                               {
-                                       LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV;
-                               }
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group INFO Address 68 Index 3");
-#endif
-                                       pts.adslLineInfo_pt->adslSNRMds = 0;    
-                               }
-                               else{
-                                       if (adsl_mode>8 || adsl_mode_extend>0)
-                                       {
-                                               int SNRMds,SNRMds_remain;
-                                               SNRMds=RxMessage[4];    
-                                               SNRMds_remain=((SNRMds&0xff)*1000)/256;
-                                               SNRMds=(SNRMds>>8)&0xff;
-                                               if ((SNRMds_remain%100)>=50) SNRMds_remain=(SNRMds_remain/100)+1;
-                                               else  SNRMds_remain=(SNRMds_remain/100);
-                                               pts.adslLineInfo_pt->adslSNRMds = SNRMds*10 + SNRMds_remain;
-                                       }else
-                                       {
-                                               pts.adslLineInfo_pt->adslSNRMds = RxMessage[4];
-                                       }
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNUS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend == 0)
-                               {
-                                       LINE_INFO_SNRMNUS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 69 Index 3");
-#endif
-                                               pts.adslLineInfo_pt->adslSNRMus = 0;    
-                                       }
-                                       else{
-                                               pts.adslLineInfo_pt->adslSNRMus = RxMessage[4];
-                                       }
-                               }else
-                               {
-                                       hdlc_cmd[0]=0x0181;
-                                       hdlc_cmd[1]=0x23;
-                                       up(&mei_sema);
-                                       if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
-                                       {
-                                               set_current_state(TASK_INTERRUPTIBLE);
-                                               schedule_timeout(1);            
-                                               hdlc_rx_len=0;                  
-                                               hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
-                                               if (hdlc_rx_len <=0)
-                                               {
-                                                       meierr = -ERESTARTSYS;
-                                                       goto GET_ADSL_LINE_INFO_END;
-                                               }
-                                               pts.adslLineInfo_pt->adslSNRMus = le16_to_cpu(hdlc_rx_buffer[1]);
-                                       }
-                                       if(down_interruptible(&mei_sema))
-                                       {
-                                               meierr = -ERESTARTSYS;
-                                               goto GET_ADSL_LINE_INFO_END;
-                                       }
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPDS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend == 0)
-                               {
-                                       LINE_INFO_ACATPDS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-       #ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 68 Index 6");
-       #endif
-                                               pts.adslLineInfo_pt->adslACATPds = 0;   
-                                       }
-                                       else{
-                                               pts.adslLineInfo_pt->adslACATPds = RxMessage[4];
-                                       }
-                               }else
-                               {
-                                       hdlc_cmd[0]=0x0181;
-                                       hdlc_cmd[1]=0x25;
-                                       up(&mei_sema);
-                                       if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
-                                       {
-                                               set_current_state(TASK_INTERRUPTIBLE);
-                                               schedule_timeout(1);            
-                                               hdlc_rx_len=0;                  
-                                               hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
-                                               if (hdlc_rx_len <=0)
-                                               {
-                                                       meierr = -ERESTARTSYS;
-                                                       goto GET_ADSL_LINE_INFO_END;
-                                               }
-                                               pts.adslLineInfo_pt->adslACATPds = le16_to_cpu(hdlc_rx_buffer[1]);
-                                       }
-                                       if(down_interruptible(&mei_sema))
-                                       {
-                                               meierr = -ERESTARTSYS;
-                                               goto GET_ADSL_LINE_INFO_END;
-                                       }
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPUS_FLAG)){
-                               if (adsl_mode <=8 && adsl_mode_extend == 0)
-                               {
-                                       LINE_INFO_ACATPUS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 69 Index 6");
-#endif
-                                               pts.adslLineInfo_pt->adslACATPus = 0;   
-                                       }
-                                       else{
-                                               pts.adslLineInfo_pt->adslACATPus = RxMessage[4];
-                                       }
-                               }else
-                               {
-                                       hdlc_cmd[0]=0x0181;
-                                       hdlc_cmd[1]=0x26;
-                                       up(&mei_sema);
-                                       if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
-                                       {
-                                               set_current_state(TASK_INTERRUPTIBLE);
-                                               schedule_timeout(1);            
-                                               hdlc_rx_len=0;                  
-                                               hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
-                                               if (hdlc_rx_len <=0)
-                                               {
-                                                       meierr = -ERESTARTSYS;
-                                                       goto GET_ADSL_LINE_INFO_END;
-                                               }
-                                               pts.adslLineInfo_pt->adslACATPus = le16_to_cpu(hdlc_rx_buffer[1]);
-                                       }
-                                       if(down_interruptible(&mei_sema))
-                                       {
-                                               meierr = -ERESTARTSYS;
-                                               goto GET_ADSL_LINE_INFO_END;
-                                       }
-                               }
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.adslLineInfo_pt, sizeof(adslLineInfo));
-                       up(&mei_sema);
-
-GET_ADSL_LINE_INFO_END:                        
-                       kfree(pts.adslLineInfo_pt);
-                       break;
-
-               case GET_ADSL_NEAREND_STATS:
-                       if (showtime!=1)
-                               return -ERESTARTSYS;
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       
-                       pts.adslNearEndPerfStats_pt = (adslNearEndPerfStats *)kmalloc(sizeof(adslNearEndPerfStats), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslNearEndPerfStats_pt, (char *)lon, sizeof(adslNearEndPerfStats));
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SUPERFRAME_FLAG)){
-                               NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 20 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslSuperFrames = 0;       
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslSuperFrames = (u32)(RxMessage[4]);
-                               }
-                               NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 21 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslSuperFrames = 0;       
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslSuperFrames += (((u32)(RxMessage[4]))<<16);
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG) || 
-                          IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG) ||
-                          IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG) ||
-                          IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG) ||
-                          IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG) ){
-                               NEAREND_PERF_LOS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 0 Index 0");
-#endif                                 
-                                       RxMessage[4] = 0;
-                               }
-                               if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG)){
-                                       if( (RxMessage[4]&0x1) == 0x1)
-                                               pts.adslNearEndPerfStats_pt->adslneLOS = 1;
-                                       else
-                                               pts.adslNearEndPerfStats_pt->adslneLOS = 0;
-                               }
-                               
-                               if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG)){
-                                       if( (RxMessage[4]&0x2) == 0x2)
-                                               pts.adslNearEndPerfStats_pt->adslneLOF = 1;
-                                       else
-                                               pts.adslNearEndPerfStats_pt->adslneLOF = 0;
-                               }
-                               
-                               if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG)){
-                                       if( (RxMessage[4]&0x4) == 0x4)
-                                               pts.adslNearEndPerfStats_pt->adslneLPR = 1;
-                                       else
-                                               pts.adslNearEndPerfStats_pt->adslneLPR = 0;
-                               }
-                               
-                               if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG)){
-                                       pts.adslNearEndPerfStats_pt->adslneNCD = (RxMessage[4]>>4)&0x3;
-                               }
-                               
-                               if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG)){
-                                       pts.adslNearEndPerfStats_pt->adslneLCD = (RxMessage[4]>>6)&0x3;
-                               }
-                       }
-                                               
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_CRC_FLAG)){
-                               if (chantype.interleave)
-                                       NEAREND_PERF_CRC_FLAG_LP0_MAKECMV;
-                               else
-                                       NEAREND_PERF_CRC_FLAG_LP1_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 2 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslneCRC = 0;     
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslneCRC = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_RSCORR_FLAG)){
-                               if (chantype.interleave)
-                                       NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV;
-                               else
-                                       NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV;
-                                       
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 3 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslneRSCorr = 0;  
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslneRSCorr = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_FECS_FLAG)){
-                               NEAREND_PERF_FECS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 6 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslneFECS = 0;    
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslneFECS = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_ES_FLAG)){
-                               NEAREND_PERF_ES_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 7 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslneES = 0;      
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslneES = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SES_FLAG)){
-                               NEAREND_PERF_SES_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 8 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslneSES = 0;     
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslneSES = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOSS_FLAG)){
-                               NEAREND_PERF_LOSS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 9 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslneLOSS = 0;    
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslneLOSS = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_UAS_FLAG)){
-                               NEAREND_PERF_UAS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 10 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslneUAS = 0;     
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslneUAS = RxMessage[4];
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_HECERR_FLAG)){
-                               if (chantype.bearchannel0)
-                               {
-                                       NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV;
-                               }else if (chantype.bearchannel1)
-                               {
-                                       NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV;
-                               }
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 11 Index 0");
-#endif
-                                       pts.adslNearEndPerfStats_pt->adslneHECErrors = 0;       
-                               }
-                               else{
-                                       pts.adslNearEndPerfStats_pt->adslneHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                               }
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.adslNearEndPerfStats_pt, sizeof(adslNearEndPerfStats));
-                       kfree(pts.adslNearEndPerfStats_pt);
-                       
-                       up(&mei_sema);
-                       break;
-
-               case GET_ADSL_FAREND_STATS:
-
-                       if (showtime!=1)
-                               return -ERESTARTSYS;
-                       
-                       if (adsl_mode>8 || adsl_mode_extend > 0)
-                       {
-                               do_gettimeofday(&time_now);
-                               if( FarendData_acquire_time.tv_sec==0 || time_now.tv_sec - FarendData_acquire_time.tv_sec>=1)
-                               {                                                               
-                                       hdlc_cmd[0]=0x105;
-                                       
-                                       if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],2)!= -EBUSY)
-                                       {
-                                               set_current_state(TASK_INTERRUPTIBLE);
-                                               schedule_timeout(1);            
-                                               hdlc_rx_len=0;                  
-                                               hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
-                                               if (hdlc_rx_len <=0)
-                                               {
-                                                       return -ERESTARTSYS;
-                                               }
-                                               FarendStatsData.adslfeRSCorr = ((u32)le16_to_cpu(hdlc_rx_buffer[1]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[2]);
-                                               FarendStatsData.adslfeCRC = ((u32)le16_to_cpu(hdlc_rx_buffer[3]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[4]);
-                                               FarendStatsData.adslfeFECS = ((u32)le16_to_cpu(hdlc_rx_buffer[5]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[6]);
-                                               FarendStatsData.adslfeES = ((u32)le16_to_cpu(hdlc_rx_buffer[7]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[8]);
-                                               FarendStatsData.adslfeSES = ((u32)le16_to_cpu(hdlc_rx_buffer[9]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[10]);
-                                               FarendStatsData.adslfeLOSS = ((u32)le16_to_cpu(hdlc_rx_buffer[11]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[12]);
-                                               FarendStatsData.adslfeUAS = ((u32)le16_to_cpu(hdlc_rx_buffer[13]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[14]);
-                                               do_gettimeofday(&FarendData_acquire_time);
-                                       }
-                                       
-                               }
-                       }
-                       
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       pts.adslFarEndPerfStats_pt = (adslFarEndPerfStats *)kmalloc(sizeof(adslFarEndPerfStats), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslFarEndPerfStats_pt, (char *)lon, sizeof(adslFarEndPerfStats));
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG) || 
-                          IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG) ||
-                          IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG) ||
-                          IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG) ||
-                          IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG) ){
-                               FAREND_PERF_LOS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 1 Index 0");
-#endif                                 
-                                       RxMessage[4] = 0;
-                               }
-                               if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG)){
-                                       if((RxMessage[4]&0x1) == 0x1)
-                                               pts.adslFarEndPerfStats_pt->adslfeLOS = 1;
-                                       else
-                                               pts.adslFarEndPerfStats_pt->adslfeLOS = 0;
-                               }
-                               
-                               if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG)){
-                                       if((RxMessage[4]&0x2) == 0x2)
-                                               pts.adslFarEndPerfStats_pt->adslfeLOF = 1;
-                                       else
-                                               pts.adslFarEndPerfStats_pt->adslfeLOF = 0;
-                               }
-                               
-                               if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG)){
-                                       if((RxMessage[4]&0x4) == 0x4)
-                                               pts.adslFarEndPerfStats_pt->adslfeLPR = 1;
-                                       else
-                                               pts.adslFarEndPerfStats_pt->adslfeLPR = 0;
-                               }
-                               
-                               if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG)){
-                                       pts.adslFarEndPerfStats_pt->adslfeNCD = (RxMessage[4]>>4)&0x3;
-                               }
-                               
-                               if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG)){
-                                       pts.adslFarEndPerfStats_pt->adslfeLCD = (RxMessage[4]>>6)&0x3;
-                               }
-                       }
-                                               
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_CRC_FLAG)){
-                               if (adsl_mode<=8 && adsl_mode_extend == 0)
-                               {
-                                       if (chantype.interleave)
-                                       {
-                                               FAREND_PERF_CRC_FLAG_LP0_MAKECMV;
-                                       }
-                                       else
-                                       {
-                                               FAREND_PERF_CRC_FLAG_LP1_MAKECMV;
-                                       }
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 24 Index 0");
-#endif
-                                               pts.adslFarEndPerfStats_pt->adslfeCRC = 0;      
-                                       }
-                                       else{
-                                               pts.adslFarEndPerfStats_pt->adslfeCRC = RxMessage[4];                                   
-                                       }
-                               }else
-                               {
-                                       pts.adslFarEndPerfStats_pt->adslfeCRC = FarendStatsData.adslfeCRC;
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_RSCORR_FLAG)){
-                               if (adsl_mode<=8 && adsl_mode_extend == 0)
-                               {
-                                       if (chantype.interleave)
-                                               FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV;
-                                       else
-                                               FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 28 Index 0");
-#endif
-                                               pts.adslFarEndPerfStats_pt->adslfeRSCorr = 0;   
-                                       }
-                                       else{
-                                               pts.adslFarEndPerfStats_pt->adslfeRSCorr = RxMessage[4];
-                                               
-                                       }
-                               }
-                               else
-                               {
-                                       pts.adslFarEndPerfStats_pt->adslfeRSCorr = FarendStatsData.adslfeRSCorr;
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_FECS_FLAG)){
-                               if (adsl_mode<=8 && adsl_mode_extend == 0)
-                               {
-                                       FAREND_PERF_FECS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 32 Index 0");
-#endif
-                                               pts.adslFarEndPerfStats_pt->adslfeFECS = 0;     
-                                       }
-                                       else{
-                                               pts.adslFarEndPerfStats_pt->adslfeFECS = RxMessage[4];                                          
-                                       }
-                               }else {
-                                       pts.adslFarEndPerfStats_pt->adslfeFECS = FarendStatsData.adslfeFECS;
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_ES_FLAG)){
-                               if (adsl_mode<=8 && adsl_mode_extend == 0)
-                               {
-                                       FAREND_PERF_ES_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 33 Index 0");
-#endif
-                                               pts.adslFarEndPerfStats_pt->adslfeES = 0;       
-                                       }
-                                       else{
-                                               pts.adslFarEndPerfStats_pt->adslfeES = RxMessage[4];                                            
-                                       }
-                               }else
-                               {
-                                       pts.adslFarEndPerfStats_pt->adslfeES = FarendStatsData.adslfeES;
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_SES_FLAG)){
-                               if (adsl_mode<=8 && adsl_mode_extend == 0)
-                               {
-                                       FAREND_PERF_SES_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 34 Index 0");
-#endif
-                                               pts.adslFarEndPerfStats_pt->adslfeSES = 0;      
-                                       }
-                                       else{
-                                               pts.adslFarEndPerfStats_pt->adslfeSES = RxMessage[4];
-                                               
-                                       }
-                               }else
-                               {
-                                       pts.adslFarEndPerfStats_pt->adslfeSES = FarendStatsData.adslfeSES;
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOSS_FLAG)){
-                               if (adsl_mode<=8 && adsl_mode_extend == 0)
-                               {
-                                       FAREND_PERF_LOSS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                               pts.adslFarEndPerfStats_pt->adslfeLOSS = 0;     
-                                       }
-                                       else{
-                                               pts.adslFarEndPerfStats_pt->adslfeLOSS = RxMessage[4];
-                                               
-                                       }
-                               }else
-                               {
-                                       pts.adslFarEndPerfStats_pt->adslfeLOSS = FarendStatsData.adslfeLOSS;
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_UAS_FLAG)){
-                               if (adsl_mode<=8 && adsl_mode_extend == 0)
-                               {
-                                       FAREND_PERF_UAS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 36 Index 0");
-#endif
-                                               pts.adslFarEndPerfStats_pt->adslfeUAS = 0;      
-                                       }
-                                       else{
-                                               pts.adslFarEndPerfStats_pt->adslfeUAS = RxMessage[4];
-                                               
-                                       }
-                               }else
-                               {
-                                       pts.adslFarEndPerfStats_pt->adslfeUAS = FarendStatsData.adslfeUAS;
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_HECERR_FLAG)){
-                               if (chantype.bearchannel0)
-                               {
-                                       FAREND_PERF_HECERR_FLAG_BC0_MAKECMV;
-                               }else if (chantype.bearchannel1)
-                               {
-                                       FAREND_PERF_HECERR_FLAG_BC1_MAKECMV;
-                               }
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 37 Index 0");
-#endif
-                                       pts.adslFarEndPerfStats_pt->adslfeHECErrors = 0;        
-                               }
-                               else{
-                                       pts.adslFarEndPerfStats_pt->adslfeHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                               }
-                       }
-                       
-                       copy_to_user((char *)lon, (char *)pts.adslFarEndPerfStats_pt, sizeof(adslFarEndPerfStats));             
-                       kfree(pts.adslFarEndPerfStats_pt);
-                       
-                       up(&mei_sema);
-                       
-                       break;
-// 603221:tc.chen end
-               case GET_ADSL_LOOP_DIAGNOSTICS_MODE:
-                       //lon = loop_diagnostics_mode;
-                       copy_to_user((char *)lon, (char *)&loop_diagnostics_mode, sizeof(int)); 
-                       break;
-//>> SHC
-               case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE:
-                       copy_to_user((char *)lon, (char *)&loop_diagnostics_completed, sizeof(int));    
-                       break;
-                       
-//<< end SHC
-               case LOOP_DIAGNOSTIC_MODE_COMPLETE:
-                       loop_diagnostics_completed = 1;
-                       // read adsl mode
-                       makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data); 
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-                       }
-                       adsl_mode = RxMessage[4];
-
-                       makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data); 
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-                       }
-                       adsl_mode_extend = RxMessage[4];
-                       wake_up_interruptible(&wait_queue_loop_diagnostic);     
-                       break;
-               case SET_ADSL_LOOP_DIAGNOSTICS_MODE:
-                       if (lon != loop_diagnostics_mode)
-                       {
-                               loop_diagnostics_completed = 0;
-                               loop_diagnostics_mode = lon;
-
-                               mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_REBOOT, NULL);
-                               
-                       }
-                       break;
-               case GET_ADSL_ATUR_SUBCARRIER_STATS:
-                       if (loop_diagnostics_completed == 0)
-                       {
-                               interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ);
-                               if (loop_diagnostics_completed==0)
-                               {
-                                       return -ERESTARTSYS;
-                               }
-                       }
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                               
-                       pts.adslATURSubcarrierInfo_pt = (adslATURSubcarrierInfo *)kmalloc(sizeof(adslATURSubcarrierInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslATURSubcarrierInfo_pt, (char *)lon, sizeof(adslATURSubcarrierInfo));
-                       
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_HLINSC)){
-                               FAREND_HLINSC_MAKECMV(H2D_CMV_READ);
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       pts.adslATURSubcarrierInfo_pt->HLINSCds = 0;    
-                               }
-                               else{
-                                       pts.adslATURSubcarrierInfo_pt->HLINSCds = RxMessage[4];
-                                       
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_HLINPS)){
-                               int index=0,size=12;
-                               //printk("FAREND_HLINPS\n");
-                               for (index=0;index<1024;index+=size)
-                               {
-                                       if (index+size>=1024)
-                                               size = 1024-index;
-                                       FAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       }
-                                       else{
-                                               memcpy(&pts.adslATURSubcarrierInfo_pt->HLINpsds[index],&RxMessage[4],size*2);
-#if 0
-                                               int msg_idx;
-                                               for(msg_idx=0;msg_idx<size;msg_idx++)
-                                                       printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-#endif
-                                       }
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_HLOGMT)){
-                               FAREND_HLOGMT_MAKECMV(H2D_CMV_READ);
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       pts.adslATURSubcarrierInfo_pt->HLOGMTds = 0;    
-                               }
-                               else{
-                                       pts.adslATURSubcarrierInfo_pt->HLOGMTds = RxMessage[4];
-                                       
-                               }
-                       }
-                       
-                       /////////////////////////////////////////////////////////////////////////
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_HLOGPS)){
-                               //printk("FAREND_HLOGPS\n");
-                               int index=0,size=12;
-                               for (index=0;index<256;index+=size)
-                               {
-                                       if (index+size>=256)
-                                               size = 256-index;
-
-                                       FAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       }
-                                       else{
-                                               if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
-                                               {
-                                                       memcpy(&pts.adslATURSubcarrierInfo_pt->HLOGpsds[index],&RxMessage[4],size*2);
-                                               }else
-                                               {
-                                                       int msg_idx=0;
-                                                       for (msg_idx=0;msg_idx<size;msg_idx++)
-                                                       {
-                                                               pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index+msg_idx)*2+1] = RxMessage[4+msg_idx];
-                                                               //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                                       }
-                                               }       
-                                       }
-                               }
-                               if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode
-                               {
-                                       pts.adslATURSubcarrierInfo_pt->HLOGpsds[0] = pts.adslATURSubcarrierInfo_pt->HLOGpsds[1];
-                                       for (index=1;index<256;index++)
-                                       {
-                                               pts.adslATURSubcarrierInfo_pt->HLOGpsds[index*2]   = (pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2-1] +  pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2+1] +1) >>1;
-                                       }
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_QLNMT)){
-                               FAREND_QLNMT_MAKECMV(H2D_CMV_READ);
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       pts.adslATURSubcarrierInfo_pt->QLNMTds = 0;     
-                               }
-                               else{
-                                       pts.adslATURSubcarrierInfo_pt->QLNMTds = RxMessage[4];                                  
-                               }
-                       }
-                       
-                       /////////////////////////////////////////////////////////////////////////
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_QLNPS)){
-                               int index=0,size=12;
-                               //printk("FAREND_QLNPS\n");
-                               for (index=0;index<128;index+=size)
-                               {
-                                       if (index+size>=128)
-                                               size = 128-index;
-                                       FAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       }
-                                       else{
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       //memcpy(&pts.adslATURSubcarrierInfo_pt->QLNpsds[index],&RxMessage[4],size*2);
-                                                       if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
-                                                       {
-                                                               pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
-                                                               pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
-                                                       }else
-                                                       {
-                                                               pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF);
-                                                               pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
-                                                               //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                                       }
-                                               }
-
-                                               
-                                       }
-                               }
-                               if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode
-                               {
-                                       pts.adslATURSubcarrierInfo_pt->QLNpsds[0] = pts.adslATURSubcarrierInfo_pt->QLNpsds[1];
-                                       for (index=1;index<256;index++)
-                                       {
-                                               pts.adslATURSubcarrierInfo_pt->QLNpsds[index*2]   = (pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2-1] +  pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2+1]) >>1;
-                                       }
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_SNRMT)){
-                               FAREND_SNRMT_MAKECMV(H2D_CMV_READ);
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       pts.adslATURSubcarrierInfo_pt->SNRMTds = 0;     
-                               }
-                               else{
-                                       pts.adslATURSubcarrierInfo_pt->SNRMTds = RxMessage[4];                                  
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_SNRPS)){
-                               int index=0,size=12;
-                               //printk("FAREND_SNRPS\n");
-                               for (index=0;index<512;index+=size)
-                               {
-                                       if (index+size>=512)
-                                               size = 512-index;
-                                       FAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       }
-                                       else{
-                                               //memcpy(&pts.adslATURSubcarrierInfo_pt->SNRpsds[index],&RxMessage[4],size*2);
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       pts.adslATURSubcarrierInfo_pt->SNRpsds[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF);
-                                                       //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                               }
-                                               
-                                       }
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_BITPS)){
-                               int index=0,size=12;
-                               //printk("FAREND_BITPS\n");
-                               for (index=0;index<256;index+=size)
-                               {
-                                       if (index+size>=256)
-                                               size = 256-index;
-                                       FAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       }
-                                       else{
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
-                                                       pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
-                                                       //printk("index:%d ,cmv_result: %04X, %d\n",index+msg_idx,RxMessage[4+msg_idx],RxMessage[4+msg_idx]);
-                                                       
-                                               }
-                                               
-                                       }
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)),  FAREND_GAINPS)){
-                               int index=0,size=12;
-                               //printk("FAREND_GAINPS\n");
-                               for (index=0;index<512;index+=size)
-                               {
-                                       FAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                                       }
-                                       else{
-                                       /*
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF;
-                                                       pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF;
-                                                       
-                                               }
-                                               */
-                                               memcpy(&pts.adslATURSubcarrierInfo_pt->GAINpsds[index],&RxMessage[4],size*2);   
-#if 0
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                                       
-                                               }
-#endif
-                                       }
-                               }
-                       }                               
-                       copy_to_user((char *)lon, (char *)pts.adslATURSubcarrierInfo_pt, sizeof(adslATURSubcarrierInfo));               
-                       kfree(pts.adslATURSubcarrierInfo_pt);
-                       
-                       up(&mei_sema);
-                       break;
-               case GET_ADSL_ATUC_SUBCARRIER_STATS:
-                       if (loop_diagnostics_completed == 0)
-                       {
-                               interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ);
-                               if (loop_diagnostics_completed==0)
-                               {
-                                       return -ERESTARTSYS;
-                               }
-                       }
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       pts.adslATUCSubcarrierInfo_pt = (adslATUCSubcarrierInfo *)kmalloc(sizeof(adslATUCSubcarrierInfo), GFP_KERNEL);
-                       copy_from_user((char *)pts.adslATUCSubcarrierInfo_pt, (char *)lon, sizeof(adslATUCSubcarrierInfo));
-                       
-                       
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_HLINSC)){
-                               NEAREND_HLINSC_MAKECMV(H2D_CMV_READ);
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group INFO Address 71 Index 2");
-#endif
-                                       pts.adslATUCSubcarrierInfo_pt->HLINSCus = 0;    
-                               }
-                               else{
-                                       pts.adslATUCSubcarrierInfo_pt->HLINSCus = RxMessage[4];
-                                       
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_HLINPS)){
-                               int index=0,size=12;
-                               //printk("NEAREND_HLINPS\n");
-                               for (index=0;index<128;index+=size)
-                               {
-                                       if (index+size>=128)
-                                               size = 128-index;
-                                       NEAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 73 Index 0");
-#endif
-                                       }
-                                       else{
-                                               memcpy(&pts.adslATUCSubcarrierInfo_pt->HLINpsus[index],&RxMessage[4],size*2);
-#if 0
-                                               int msg_idx;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                               }
-#endif
-                                       }
-                               }
-                       }
-                       
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_HLOGMT)){
-                               NEAREND_HLOGMT_MAKECMV(H2D_CMV_READ);
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group INFO Address 80 Index 0");
-#endif
-                                       pts.adslATUCSubcarrierInfo_pt->HLOGMTus = 0;    
-                               }
-                               else{
-                                       pts.adslATUCSubcarrierInfo_pt->HLOGMTus = RxMessage[4];
-                                       
-                               }
-                       }
-                       
-                       /////////////////////////////////////////////////////////////////////////
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_HLOGPS)){
-                               int index=0,size=12;
-                               //printk("NEAREND_HLOGPS\n");
-                               for (index=0;index<64;index+=size)
-                               {
-                                       if (index+size>=64)
-                                               size = 64-index;
-                                       NEAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 75 Index 0");
-#endif
-                                       }
-                                       else{                                           
-#if 0
-                                               if (adsl_mode <0x4000)//adsl /adsl2 mode
-                                               {
-#endif
-                                               memcpy(&pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index],&RxMessage[4],size*2);
-#if 0
-                                               }else
-                                               {
-                                                       int msg_idx=0;
-                                                       for (msg_idx=0;msg_idx<size;msg_idx++)
-                                                       {
-                                                               //pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)*2+1] = RxMessage[4+msg_idx];
-                                                               pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)] = RxMessage[4+msg_idx];
-                                                       }
-                                               }                                               
-#endif
-                                       }
-                               }
-#if 0
-                               if (adsl_mode >= 0x4000)//adsl2 mode
-                               {
-                                       pts.adslATUCSubcarrierInfo_pt->HLOGpsus[0] = pts.adslATUCSubcarrierInfo_pt->HLOGpsus[1];
-                                       for (index=1;index<64;index++)
-                                       {
-                                               pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index*2]   = (pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2-1] +  pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2+1]) >>1;
-                                       }
-                               }
-#endif
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_QLNMT)){
-                               NEAREND_QLNMT_MAKECMV(H2D_CMV_READ);
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group INFO Address 80 Index 1");
-#endif
-                                       pts.adslATUCSubcarrierInfo_pt->QLNMTus = 0;     
-                               }
-                               else{
-                                       pts.adslATUCSubcarrierInfo_pt->QLNMTus = RxMessage[4];                                  
-                               }
-                       }
-                       
-                       /////////////////////////////////////////////////////////////////////////
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_QLNPS)){
-                               int index=0,size=12;
-                               //printk("NEAREND_QLNPS\n");
-                               for (index=0;index<32;index+=size)
-                               {
-                                       if (index+size>=32)
-                                               size = 32-index;
-                                       NEAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 77 Index 0");
-#endif
-                                       }
-                                       else{
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-
-#if 0
-                                                       //memcpy(&pts.adslATUCSubcarrierInfo_pt->QLNpsds[index],&RxMessage[4],size*2);
-                                                       if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000  || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M
-                                                       if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
-                                                       {
-                                                               pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF);
-                                                               pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
-                                                       }else
-#endif
-                                                       {
-                                                               pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
-                                                               pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
-                                                       //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                                       }
-                                               }
-
-                                               
-                                       }
-                               }
-#if 0
-                               //if (adsl_mode <0x4000)//Annex I/J/L/M
-                               if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000  || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M
-                               {
-                                       pts.adslATUCSubcarrierInfo_pt->QLNpsus[0] = pts.adslATUCSubcarrierInfo_pt->QLNpsus[1];
-                                       for (index=1;index<64;index++)
-                                       {
-                                               pts.adslATUCSubcarrierInfo_pt->QLNpsus[index*2]   = (pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2-1] +  pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2+1]) >>1;
-                                       }
-                               }
-#endif
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_SNRMT)){
-                               NEAREND_SNRMT_MAKECMV(H2D_CMV_READ);
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group INFO Address 80 Index 2");
-#endif
-                                       pts.adslATUCSubcarrierInfo_pt->SNRMTus = 0;     
-                               }
-                               else{
-                                       pts.adslATUCSubcarrierInfo_pt->SNRMTus = RxMessage[4];                                  
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_SNRPS)){
-                               int index=0,size=12;
-                               //printk("NEAREND_SNRPS\n");
-                               for (index=0;index<64;index+=size)
-                               {
-                                       if (index+size>=64)
-                                               size = 64-index;
-                                       NEAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 78 Index 0");
-#endif
-                                       }
-                                       else{
-                                               //memcpy(&pts.adslATUCSubcarrierInfo_pt->SNRpsus[index],&RxMessage[4],size*2);
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       pts.adslATUCSubcarrierInfo_pt->SNRpsus[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF);
-                                                       //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                               }
-                                               
-                                       }
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_BITPS)){
-                               int index=0,size=12;
-                               //printk("NEAREND_BITPS\n");
-                               for (index=0;index<32;index+=size)
-                               {
-                                       if (index+size>=32)
-                                               size = 32-index;
-                                       NEAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 22 Index 0");
-#endif
-                                       }
-                                       else{
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
-                                                       pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
-                                                       //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                               }
-                                               
-                                       }
-                               }
-                       }
-                       if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)),  NEAREND_GAINPS)){
-                               int index=0,size=12;
-                               //printk("NEAREND_GAINPS\n");
-                               for (index=0;index<64;index+=size)
-                               {
-                                       if (index+size>=64)
-                                               size = 64-index;
-                                       NEAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size);
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group INFO Address 24 Index 0");
-#endif
-                                       }
-                                       else{
-                                       /*
-                                               int msg_idx=0;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF;
-                                                       pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF;
-                                                       
-                                               }
-                                               */
-                                               memcpy(&pts.adslATUCSubcarrierInfo_pt->GAINpsus[index],&RxMessage[4],size*2);   
-#if 0
-                                               int msg_idx;
-                                               for (msg_idx=0;msg_idx<size;msg_idx++)
-                                               {
-                                                       printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-                                               }
-#endif
-                                       }
-                               }
-                       }                               
-                       copy_to_user((char *)lon, (char *)pts.adslATUCSubcarrierInfo_pt, sizeof(adslATUCSubcarrierInfo));               
-                       kfree(pts.adslATUCSubcarrierInfo_pt);                   
-                       up(&mei_sema);
-                       break;
-               case GET_ADSL_LINE_INIT_STATS:                  
-                       copy_to_user((char *)lon, (char *)&AdslInitStatsData, sizeof(AdslInitStatsData));               
-                       break;
-               
-               case GET_ADSL_POWER_SPECTRAL_DENSITY:           
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-                       i=0;
-                       pts.adslPowerSpectralDensity_pt = (adslPowerSpectralDensity *)kmalloc(sizeof(adslPowerSpectralDensity), GFP_KERNEL);
-                       memset((char *)pts.adslPowerSpectralDensity_pt, 0, sizeof(adslPowerSpectralDensity));   
-
-                       //US
-                       NOMPSD_US_MAKECMV;
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                               i=-1;
-                       }
-                       else{
-                               j=RxMessage[4];
-                       }
-                       PCB_US_MAKECMV;
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                               i=-1;
-                       }
-                       else{
-                               temp=RxMessage[4];
-                       }
-                       RMSGI_US_MAKECMV;
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                               i=-1;
-                       }
-                       else{
-                               k=(int16_t)RxMessage[4];
-                       }
-                       if (i==0)
-                       {
-                               pts.adslPowerSpectralDensity_pt->ACTPSDus = ((int )(j*256 - temp*10*256 + k*10)) /256;
-                       }
-                       // DS
-                       i=0;
-                       j=temp=temp2=0;
-                       NOMPSD_DS_MAKECMV;
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                               i=-1;
-                       }
-                       else{
-                               j=RxMessage[4];
-                       }
-                       PCB_DS_MAKECMV;
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                               i=-1;
-                       }
-                       else{
-                               temp=RxMessage[4];
-                       }
-                       RMSGI_DS_MAKECMV;
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
-                               i=-1;
-                       }
-                       else{
-                               //temp2=RxMessage[4];
-                               k=(int16_t)RxMessage[4];
-                       }
-                       if (i==0)
-                       {
-                               pts.adslPowerSpectralDensity_pt->ACTPSDds = ((int )(j*256 - temp*10*256 + k*10)) /256;
-                       }
-                       copy_to_user((char *)lon, (char *)pts.adslPowerSpectralDensity_pt, sizeof(adslPowerSpectralDensity));   
-                       kfree(pts.adslPowerSpectralDensity_pt);         
-                       up(&mei_sema);
-                       break;
-                case AMAZON_MEI_START:
-                       showtime=0;
-                       loop_diagnostics_completed = 0;
-#ifdef ARC_READY_ACK
-#ifdef LOCK_RETRY
-                       i=0;
-lock_retry:
-                       if(down_trylock(&mei_sema)!=0)
-                       {
-                               reboot_lock = 1;
-                               printk("lock fail\n");
-                               i++;
-                               if (i <=5)
-                               {
-                                       set_current_state(TASK_INTERRUPTIBLE);
-                                       schedule_timeout(10);
-                                       goto lock_retry;
-                               }else
-                               {
-                                       printk("Force to Reboot ADSL!\n");
-                                       up(&mei_sema);
-                                       set_current_state(TASK_INTERRUPTIBLE);
-                                       schedule_timeout(1000);
-                                       sema_init(&mei_sema, 1);  // semaphore initialization, mutex
-                               }
-                       }else
-                       {
-                               reboot_lock = 1;
-                       }
-#else
-                       if(down_interruptible(&mei_sema))       //disable CMV access until ARC ready
-                       {
-                               return -ERESTARTSYS;
-                       }
-#endif
-#endif
-                       //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
-                       if(chantype.interleave==1){
-                               kfree(interleave_mei_net.priv);
-                               unregister_netdev(&interleave_mei_net);
-                       }
-                       else if(chantype.fast==1){
-                               kfree(fast_mei_net.priv);
-                               unregister_netdev(&fast_mei_net);
-                       }               
-                       chantype.interleave=0;
-                       chantype.fast=0;
-                       meiMailboxInterruptsDisable(); //disable all MEI interrupts
-                       if(mei_arc_swap_buff == NULL){
-                       mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL);
-                       if(mei_arc_swap_buff==NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\n malloc fail for codeswap buff");
-#endif
-                               meierr=MEI_FAILURE;
-                       }
-                       }
-                        if(meiForceRebootAdslModem() != MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                printk("\n\n meiForceRebootAdslModem()  error...");
-#endif
-                                meierr=MEI_FAILURE;
-                        }     
-                       interruptible_sleep_on(&wait_queue_codeswap);
-                       // reset is called
-                        break;
-               case AMAZON_MEI_MIB_DAEMON:
-#ifdef IFX_SMALL_FOOTPRINT /* [ */
-                       return -1;
-#else /* ][ !IFX_SMALL_FOOTPRINT */
-                       i=0;
-                       while(1){
-                               if(i<MIB_INTERVAL)
-                                       interruptible_sleep_on_timeout(&wait_queue_mibdaemon, ((MIB_INTERVAL-i)/(1000/HZ)));
-                               i=0;
-                               if(showtime==1){
-//                                     printk("\n\n update mib");
-                                       
-                                       do_gettimeofday(&time_now);
-                                       if(time_now.tv_sec - current_intvl->start_time.tv_sec>=900){
-                                               if(current_intvl->list.next!=&interval_list){
-                                                       current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
-                                                       do_gettimeofday(&(current_intvl->start_time));
-                                               }
-                                               else{
-                                                       mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list);
-                                                       list_del(interval_list.next);
-                                                       memset(mib_ptr, 0, sizeof(amazon_mei_mib));
-                                                       list_add_tail(&(mib_ptr->list), &interval_list);
-                                                       if(current_intvl->list.next==&interval_list)
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                               printk("\n\nlink list error");
-#endif
-                                                       current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
-                                                       do_gettimeofday(&(current_intvl->start_time));
-                                               }       
-                                       }
-                                       
-                                       if(down_interruptible(&mei_sema))
-                                               return -ERESTARTSYS;
-/*                                             
-                                       ATUC_PERF_LO_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 0 Index 0");
-#endif
-                                       }
-                                       else{
-                                               if(RxMessage[4]&PLAM_LOS_FailureBit){
-                                                       current_intvl->AtucPerfLos++;
-                                                       ATUC_PERF_LOSS++;
-                                                       CurrStatus.adslAtucCurrStatus = 2;
-                                               }
-                                               if(RxMessage[4]&PLAM_LOF_FailureBit){
-                                                       current_intvl->AtucPerfLof++;
-                                                       ATUC_PERF_LOFS++;
-                                                       CurrStatus.adslAtucCurrStatus = 1;
-                                               }
-                                               if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit)))
-                                                       CurrStatus.adslAtucCurrStatus = 0;
-                                       }
-*/
-                                       ATUC_PERF_ESS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 7 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfEs+=temp;
-                                                       ATUC_PERF_ESS+=temp;
-                                                       mib_pread.ATUC_PERF_ESS = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
-                                                       ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
-                                                       mib_pread.ATUC_PERF_ESS = RxMessage[4];         
-                                               }
-                                       }
-/*             
-                                       ATUR_PERF_LO_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 1 Index 0");
-#endif
-                                       }
-                                       else{
-                                               if(RxMessage[4]&PLAM_LOS_FailureBit){
-                                                       current_intvl->AturPerfLos++;
-                                                       ATUR_PERF_LOSS++;
-                                                       CurrStatus.adslAturCurrStatus = 2;
-                                               }
-                                               if(RxMessage[4]&PLAM_LOF_FailureBit){
-                                                       current_intvl->AturPerfLof++;
-                                                       ATUR_PERF_LOFS++;
-                                                       CurrStatus.adslAturCurrStatus = 1;
-                                               }
-                                               if(RxMessage[4]&PLAM_LPR_FailureBit){
-                                                       current_intvl->AturPerfLpr++;
-                                                       ATUR_PERF_LPR++;
-                                                       CurrStatus.adslAturCurrStatus = 3;
-                                               }
-                                               if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit)))
-                                                       CurrStatus.adslAturCurrStatus = 0;      
-                                       }
-*/
-                                       ATUR_PERF_ESS_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 33 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS;
-                                               if(temp>=0){
-                                                       current_intvl->AturPerfEs+=temp;
-                                                       ATUR_PERF_ESS+=temp;
-                                                       mib_pread.ATUR_PERF_ESS = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
-                                                       ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
-                                                       mib_pread.ATUR_PERF_ESS=RxMessage[4];
-                                               }
-                                       }
-                                       // to update rx/tx blocks
-                                       ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 20 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp = RxMessage[4];    
-                                       }
-                                       ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 21 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp2 = RxMessage[4];   
-                                       }
-                                       if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){
-                                               current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
-                                               ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
-                                               mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
-                                               }       
-                                       else{
-                                               current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
-                                               ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
-                                               mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
-                                       }
-                                       current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk;
-                                       ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK;
-/*                                     
-                                       ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
-                                               printk("\n\nCMV fail, Group 7 Address 20 Index 0");
-                                       else{
-                                               if(RxMessage[4]){
-                                                       current_intvl->AturChanPerfTxBlk+=RxMessage[4];
-                                                       ATUR_CHAN_TX_BLK+=RxMessage[4];
-                                               }       
-                                       }
-                                       ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
-                                               printk("\n\nCMV fail, Group 7 Address 21 Index 0");
-                                       else{
-                                               if(RxMessage[4]){
-                                                       current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16);
-                                                       ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16);
-                                               }       
-                                       }
-*/                                     
-                                       if(chantype.interleave == 1){
-                                               ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL;
-                                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group 7 Address 3 Index 0");
-#endif
-                                               }
-                                               else{
-                                                       temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL;
-                                                       if(temp>=0){
-                                                               current_intvl->AturChanPerfCorrBlk+=temp;
-                                                               ATUR_CHAN_CORR_BLK+=temp;
-                                                               mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
-                                                       }       
-                                                       else{
-                                                               current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
-                                                               ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
-                                                               mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];       
-                                                       }       
-                                               }       
-                                       }
-                                       else if(chantype.fast == 1){
-                                               ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST;
-                                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group 7 Address 3 Index 1");
-#endif
-                                               }
-                                               else{
-                                                       temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST;
-                                                       if(temp>=0){
-                                                               current_intvl->AturChanPerfCorrBlk+=temp;
-                                                               ATUR_CHAN_CORR_BLK+=temp;
-                                                               mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
-                                                       }       
-                                                       else{
-                                                               current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
-                                                               ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
-                                                               mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
-                                                       }       
-                                               }               
-                                       }
-                                       
-                                       if(chantype.interleave == 1){
-                                               ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL;
-                                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group 7 Address 2 Index 0");
-#endif
-                                               }
-                                               else{
-                                                       temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL;
-                                                       if(temp>=0){
-                                                               current_intvl->AturChanPerfUncorrBlk+=temp;
-                                                               ATUR_CHAN_UNCORR_BLK+=temp;
-                                                               mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
-                                                       }
-                                                       else{
-                                                               current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
-                                                               ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
-                                                               mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
-                                                       }
-                                               }               
-                                       }
-                                       else if(chantype.fast == 1){
-                                               ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST;
-                                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\nCMV fail, Group 7 Address 2 Index 1");
-#endif
-                                               }
-                                               else{
-                                                       temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST;
-                                                       if(temp>=0){
-                                                               current_intvl->AturChanPerfUncorrBlk+=temp;
-                                                               ATUR_CHAN_UNCORR_BLK+=temp;
-                                                               mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
-                                                       }
-                                                       else{
-                                                               current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
-                                                               ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
-                                                               mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
-                                                       }
-                                               }               
-                                       }
-                                       
-                                       //RFC-3440
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-                                       ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //???
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 0 Address 0 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatFastR+=temp;
-                                                       ATUC_PERF_STAT_FASTR+=temp;
-                                                       mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
-                                                       ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
-                                                       mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
-                                               }
-                                       }
-                                       ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //???
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 0 Address 0 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatFailedFastR+=temp;
-                                                       ATUC_PERF_STAT_FAILED_FASTR+=temp;
-                                                       mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
-                                                       ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
-                                                       mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
-                                               }
-                                       }
-                                       ATUC_PERF_STAT_SESL_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 8 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatSesL+=temp;
-                                                       ATUC_PERF_STAT_SESL+=temp;
-                                                       mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
-                                                       ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
-                                                       mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
-                                               }
-                                       }
-                                       ATUC_PERF_STAT_UASL_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 10 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatUasL+=temp;
-                                                       ATUC_PERF_STAT_UASL+=temp;
-                                                       mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
-                                                       ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
-                                                       mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
-                                               }
-                                       }
-                                       ATUR_PERF_STAT_SESL_FLAG_MAKECMV;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 34 Index 0");
-#endif
-                                       }
-                                       else{
-                                               temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatUasL+=temp;
-                                                       ATUC_PERF_STAT_UASL+=temp;
-                                                       mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
-                                                       ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
-                                                       mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
-                                               }
-                                       }
-                                       
-#endif
-                                       up(&mei_sema);
-                                       
-                                       do_gettimeofday(&time_fini);
-                                       i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000))  ; //msec 
-                               }//showtime==1
-                       }        
-                       break;
-#endif /* ] !IFX_SMALL_FOOTPRINT */
-               case AMAZON_MEI_RESET:                  
-               case AMAZON_MEI_REBOOT:
-               case AMAZON_MEI_SHOWTIME:
-/*                     if(mei_arc_swap_buff !=NULL){
-                               kfree(mei_arc_swap_buff);
-                               mei_arc_swap_buff=NULL;
-                       }       
-                       if(image_buffer !=NULL){
-//                             kfree(image_buffer);
-                               vfree(image_buffer);
-                               image_buffer =NULL;
-                       }
-*/
-                       if(clreoc_command_pkt !=NULL){
-                               kfree(clreoc_command_pkt);
-                               clreoc_command_pkt =NULL;
-                       }
-                       for(i=0;i<CLREOC_BUFF_SIZE;i++)
-                               clreoc_pkt[i].len=0;    //flush all remaining clreoc commands in buffer
-/*
-                       memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM));
-                       INIT_LIST_HEAD(&interval_list);
-                       for(i=0;i<INTERVAL_NUM;i++)
-                               list_add_tail(&(mei_mib[i].list), &interval_list); 
-                       current_intvl = list_entry(interval_list.next, amazon_mei_mib, list);
-                       do_gettimeofday(&(current_intvl->start_time));
-                       ATUC_PERF_LOFS=0;
-                       ATUC_PERF_LOSS=0;
-                       ATUC_PERF_ESS=0;
-                       ATUC_PERF_INITS=0;
-                       ATUR_PERF_LOFS=0;
-                       ATUR_PERF_LOSS=0;
-                       ATUR_PERF_LPR=0;
-                       ATUR_PERF_ESS=0;
-                       ATUR_CHAN_RECV_BLK=0;
-                       ATUR_CHAN_TX_BLK=0;
-                       ATUR_CHAN_CORR_BLK=0;
-                       ATUR_CHAN_UNCORR_BLK=0;
-                       memset((((u8 *)&AlarmConfProfile)+32), 0, 16*4);
-                       AlarmConfProfile.adslLineAlarmConfProfileRowStatus=1;
-*/
-                       PrevTxRate.adslAtucChanPrevTxRate=0;
-                       PrevTxRate.adslAturChanPrevTxRate=0;
-                       CurrStatus.adslAtucCurrStatus=0;
-                       CurrStatus.adslAturCurrStatus=0;
-                       
-                       if((command==AMAZON_MEI_RESET) || (command==AMAZON_MEI_REBOOT)){
-#ifdef AMAZON_CHECK_LINK
-                               if (adsl_link_notify){
-                                       (*adsl_link_notify)(0);
-                               }
-#endif
-                               showtime=0;
-                               //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
-                               // disconnect net_dev
-                               if(chantype.interleave==1){
-                                       kfree(interleave_mei_net.priv);
-                                       unregister_netdev(&interleave_mei_net);
-//                                     if(unregister_netdev(&interleave_mei_net)!=0)
-//                                             printk("\n unregister interleave fail");
-                               }
-                               else if(chantype.fast==1){
-                                       kfree(fast_mei_net.priv);
-                                       unregister_netdev(&fast_mei_net);
-//                                     if(unregister_netdev(&fast_mei_net)!=0)
-//                                             printk("\n unregister fast fail");
-                               }
-                               chantype.interleave=0;
-                               chantype.fast=0;
-// 603221:tc.chen start
-                               chantype.bearchannel0 = 0;
-                               chantype.bearchannel1 = 0;
-                               adsl_mode = 0;
-// 603221:tc.chen end
-                               
-                               while(1){
-                                       
-                                       makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, NULL); //maximum allowed tx message length, in bytes
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-                                               //printk("AdslInitStatsData.FullInitializationCount++\n");
-                                               AdslInitStatsData.FullInitializationCount++;
-                                               //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
-                                               AdslInitStatsData.FailedFullInitializationCount++;
-                                               //printk("AdslInitStatsData.LINIT_Errors++\n");
-                                               AdslInitStatsData.LINIT_Errors++;
-                                       }else
-                                       {
-                                               //printk("RxMessage=%X\n",RxMessage[4]);
-                                               if ( RxMessage[4]!=0x1)
-                                               {
-                                                       //printk("AdslInitStatsData.FullInitializationCount++\n");
-                                                       AdslInitStatsData.FullInitializationCount++;    
-                                                       if ( RxMessage[4] != 0x7)
-                                                       {
-                                                               //printk("AdslInitStatsData.LINIT_Errors++\n");
-                                                               AdslInitStatsData.LINIT_Errors++;
-                                                               //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
-                                                               AdslInitStatsData.FailedFullInitializationCount++;
-                                                               
-                                                       }                       
-                                               }
-                                       }
-
-                                       reboot_flag=0;
-                                       wake_up_interruptible(&wait_queue_codeswap); //wake up codeswap daemon                          
-
-                                       interruptible_sleep_on_timeout(&wait_queue_reboot, 1*HZ);  // sleep until arc ready
-#ifdef ARC_READY_ACK
-                                       if(reboot_flag!=0)
-                                               break;
-                                       else
-                                       {
-                                               up(&mei_sema);
-                                               printk("\n reboot retry");
-                                       }
-#else
-                                       break;
-#endif
-                               }
-                       }
-                       else{ //AMAZON_MEI_SHOWTIME 
-                               if(down_interruptible(&mei_sema))
-                                       return -ERESTARTSYS;
-                               
-                               // clreoc stuff
-                               makeCMV(H2D_CMV_READ, INFO, 83, 0, 1, data); //maximum allowed tx message length, in bytes
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 83 Index 0");
-#endif
-                               }
-                               else{
-                                       clreoc_max_tx_len = (int)RxMessage[4];
-                                       clreoc_command_pkt = kmalloc((clreoc_max_tx_len*CLREOC_BUFF_SIZE), GFP_KERNEL);
-                                       if(clreoc_command_pkt == NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("kmalloc error for clreoc_command_pkt\n\n");
-#endif
-                                               up(&mei_sema);
-                                               return -1;
-                                       }
-                                       for(i=0;i<CLREOC_BUFF_SIZE;i++){
-                                               clreoc_pkt[i].command = (u8 *)(((u8 *)clreoc_command_pkt) + (clreoc_max_tx_len*i));
-                                               clreoc_pkt[i].len=0;
-                                       }       
-                               }
-                               
-                               // decide what channel, then register   
-                               makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data); 
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 2 Address 12 Index 0");
-#endif
-                               }
-                               else{
-                                       if((RxMessage[4]&0x1)==1){      
-                                               if(register_netdev(&interleave_mei_net)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\n Register interleave Device Failed.");
-#endif
-                                               }
-                                               else{
-                                                       chantype.interleave = 1;
-                                                       chantype.fast= 0;
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n channel is interleave");
-#endif
-                                               }       
-                                       }
-                                       else if((RxMessage[4]&0x2)==2){ 
-                                               if(register_netdev(&fast_mei_net)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n\n Register fast Device Failed.");
-#endif
-                                               }
-                                               else{
-                                                       chantype.fast = 1;
-                                                       chantype.interleave = 0;
-#ifdef AMAZON_MEI_DEBUG_ON
-                                                       printk("\n channel is fast");
-#endif
-                                               }
-                                       }
-                                       else{
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\nunknown channel type, 0x%8x", RxMessage[4]);
-#endif
-                                       }       
-// 603221:tc.chen start        
-                                       if ( (RxMessage[4]&0x100) == 0x100)
-                                       {
-                                               chantype.bearchannel0 = 1;
-                                       }else   if ( (RxMessage[4]&0x100) == 0x200)
-                                       {
-                                               chantype.bearchannel1 = 1;
-                                       }
-// 603221:tc.chen end
-                               }
-// 603221:tc.chen start                        
-                               // read adsl mode
-                               makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data); 
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-                               }
-                               adsl_mode = RxMessage[4];
-// 603221:tc.chen end
-                               makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data); 
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-                               }
-                               adsl_mode_extend = RxMessage[4];
-                               
-                               // update previous channel tx rate
-                               ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 6 Address 1 Index 0");
-#endif
-                                       PrevTxRate.adslAtucChanPrevTxRate = 0;  
-                               }
-                               else{
-                                       PrevTxRate.adslAtucChanPrevTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                               }
-                               ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 6 Address 0 Index 0");
-#endif
-                                       PrevTxRate.adslAturChanPrevTxRate = 0;  
-                               }
-                               else{
-                                       PrevTxRate.adslAturChanPrevTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
-                               }
-                               
-//                             up(&mei_sema);
-                               
-//                             showtime=1;
-                               //SET_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO OFF
-//dying gasp -start    
-#ifdef IFX_DYING_GASP                  
-                               lop_debugwr.buffer[0]=0xffffffff;               //dying gasp
-                               lop_debugwr.iCount=1;                           //dying gasp
-                               makeCMV(H2D_CMV_READ, INFO, 66, 4, 1, NULL);
-                               //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);        
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 66 Index 4");
-                               }
-#endif
-                               lop_debugwr.iAddress=(u32)RxMessage[4];
-                               makeCMV(H2D_CMV_READ, INFO, 66, 5, 1, NULL);
-                               //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);                        
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 3 Address 66 Index 5");
-                               }
-#endif
-                               lop_debugwr.iAddress+=((u32)RxMessage[4])<<16;
-                               
-//dying gasp -end                              
-#endif // IFX_DYING_GASP                       
-
-//joelin 04/16/2005-start
-                               makeCMV(H2D_CMV_WRITE, PLAM, 10, 0, 1, &unavailable_seconds);
-                               //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);                        
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 10 Index 0");
-                               
-#endif
-                               }
-                               
-
-//joelin 04/16/2005-end                
-                               showtime=1;
-                               up(&mei_sema);
-#ifdef AMAZON_CHECK_LINK
-                               if (adsl_link_notify){
-                                       (*adsl_link_notify)(1);
-                               }
-#endif
-                               
-                               
-                       }
-                       break;
-/*
-                case AMAZON_MEI_REPLY:
-                        copy_from_user((char *)buff, (char *)lon, MSG_LENGTH * 2);
-                        if(meiCMV(buff, YES_REPLY) != MEI_SUCCESS){
-                                printk("\n\n meiCMV no reply back");
-                                meierr=MEI_FAILURE;
-                        }
-                        else
-                                copy_to_user((char *)lon, (char *)RxMessage, MSG_LENGTH * 2);
-                        break;
-                case AMAZON_MEI_NOREPLY:
-                        copy_from_user((char *)buff, (char *)lon, MSG_LENGTH * 2);
-                        if(meiCMV(buff, NO_REPLY) != MEI_SUCCESS){
-                                printk("\n\n meiCMV Host to DSP failed");
-                                meierr=MEI_FAILURE;
-                        }  
-                        break;
-*/
-               
-               case AMAZON_MEI_HALT:
-                       meiHaltArc();
-                       break;
-               case AMAZON_MEI_CMV_WINHOST:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-
-                       if (!from_kernel )      
-                               copy_from_user((char *)TxMessage, (char *)lon, MSG_LENGTH*2);//joelin
-                       else
-                               memcpy(TxMessage,(char *)lon,MSG_LENGTH*2);
-                               
-#if 0                  
-//                     if((TxMessage[0]&0xff0)==0x0a0){
-                               for(i=0;i<16;i++){
-                                       printk("\nTxMessage[%i]=%8x", i, TxMessage[i]);
-                               }
-//                     }                       
-#endif                 
-                       
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-//                             printk("\n\n WINHOST CMV fail ");
-                                printk("\n\nWINHOST CMV fail :TxMessage:%X %X %X %X, RxMessage:%X %X %X %X %X\n",TxMessage[0],TxMessage[1],TxMessage[2],TxMessage[3],RxMessage[0],RxMessage[1],RxMessage[2],RxMessage[3],RxMessage[4]);
-#endif
-                               meierr = MEI_FAILURE;   
-                       }
-                       else 
-                       {
-                               if (!from_kernel )      //joelin
-                               copy_to_user((char *)lon, (char *)RxMessage, MSG_LENGTH*2);
-                               else
-                                       memcpy((char *)lon,(char *)RxMessage,MSG_LENGTH*2);
-                       }
-                               
-                       up(&mei_sema);  
-                       break;
-#ifdef AMAZON_MEI_CMV_EXTRA
-               case AMAZON_MEI_CMV_READ:
-                       copy_from_user((char *)(&regrdwr), (char *)lon, sizeof(meireg));
-                       meiLongwordRead(regrdwr.iAddress, &(regrdwr.iData));
-                       {
-//                             printk("\n\n iAddress = %8x",regrdwr.iAddress);
-                       }
-                       copy_to_user((char *)lon, (char *)(&regrdwr), sizeof(meireg));
-                       {
-//                             printk("\n\n iData readback = %8x", regrdwr.iData);
-                       }
-                       break;
-#endif
-
-#ifdef AMAZON_MEI_CMV_EXTRA
-               case AMAZON_MEI_CMV_WRITE:
-                       copy_from_user((char *)(&regrdwr), (char *)lon, sizeof(meireg));
-                       {
-//                             printk("\n\n iAddress = %8x",regrdwr.iAddress);
-//                             printk("\n\n iData = %8x",regrdwr.iData);
-                       }
-                       meiLongwordWrite(regrdwr.iAddress, regrdwr.iData);
-                       break;
-#endif
-
-#ifdef AMAZON_MEI_CMV_EXTRA
-               case AMAZON_MEI_REMOTE:
-                       copy_from_user((char *)(&i), (char *)lon, sizeof(int));
-                       if(i==0){
-                               meiMailboxInterruptsEnable();
-                                       
-                               up(&mei_sema);
-                       }
-                       else if(i==1){
-                               meiMailboxInterruptsDisable();
-                               if(down_interruptible(&mei_sema))
-                                       return -ERESTARTSYS;
-                       }
-                       else{
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\n AMAZON_MEI_REMOTE argument error");
-#endif
-                               meierr=MEI_FAILURE;
-                       }               
-                       break;
-#endif
-
-#ifdef AMAZON_MEI_CMV_EXTRA
-               case AMAZON_MEI_READDEBUG:
-               case AMAZON_MEI_WRITEDEBUG:
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-#ifdef IFX_DYING_GASP                  
-       if (!from_kernel) copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));//dying gasp
-                               else memcpy((char *)(&debugrdwr), (char *)lon,  sizeof(debugrdwr));
-#else //IFX_DYING_GASP 
-                       copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));
-
-#endif //IFX_DYING_GASP                                                        
-#if 0
-                       printk("\nIN iAddress: %8x, iCount:%8x\n", debugrdwr.iAddress, debugrdwr.iCount);
-#endif
-                       
-                       if(command==AMAZON_MEI_READDEBUG)
-                               meiDebugRead(debugrdwr.iAddress, debugrdwr.buffer, debugrdwr.iCount);
-                       else
-                               meiDebugWrite(debugrdwr.iAddress, debugrdwr.buffer, debugrdwr.iCount);  
-                               
-#ifdef IFX_DYING_GASP                          
-                       if (!from_kernel) copy_to_user((char *)lon, (char*)(&debugrdwr), sizeof(debugrdwr));//dying gasp
-#else //IFX_DYING_GASP 
-                       copy_to_user((char *)lon, (char*)(&debugrdwr), sizeof(debugrdwr));
-#endif //IFX_DYING_GASP        
-                       up(&mei_sema);
-                       
-#if 0
-                       printk("\nOUT iAddress: %8x, iCount:%8x\n", debugrdwr.iAddress, debugrdwr.iCount);
-                       for(i=0;i<debugrdwr.iCount;i++)
-                               printk("\n %8x",debugrdwr.buffer[i]);
-#endif
-                       break;
-#endif
-
-               case AMAZON_MEI_LOP:    
-               //GPIO31 :dying gasp event indication
-               //      (1) logic high: dying gasp event is false (default)
-               //      (2) logic low: dying gasp event is true
-#ifdef IFX_DYING_GASP
-                       break;
-#else                                  
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000);
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000);
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000);
-                       SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000);
-                       asm("SYNC");
-                       if(((*((volatile u32 *)0xB0100B44))&0x8000)==0x0)
-                               meierr=MEI_FAILURE; //return - to indicate loss of power
-                       break;
-#endif //#ifdef IFX_DYING_GASP                 
-                       
-                                       //for PCM
-               case AMAZON_MEI_PCM_SETUP:
-                       //gpio
-                       
-                       *AMAZON_GPIO_P0_DIR |=1<<15;
-                       *AMAZON_GPIO_P0_ALTSEL0 |=1<<15;
-                       *AMAZON_GPIO_P0_ALTSEL1 &=~(1<<15);
-                       *AMAZON_GPIO_P0_OD |=1<<15;
-                                                                                
-                       /*GPIO 16 TDM_DI*/
-                       *AMAZON_GPIO_P1_DIR &=~1;
-                       *AMAZON_GPIO_P1_ALTSEL0 |=1;
-                       *AMAZON_GPIO_P1_ALTSEL1 &=~1;
-                                                                                
-                       /*GPIO 17 TDM_DCL */
-                       *AMAZON_GPIO_P1_DIR|=0x02;
-                       *AMAZON_GPIO_P1_ALTSEL0|=0x02;
-                       *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x02;
-                       *AMAZON_GPIO_P1_OD|=0x02;
-                                                                                
-                       /*GPIO 18 TDM FSC*/
-                       *AMAZON_GPIO_P1_DIR|=0x04;
-                       *AMAZON_GPIO_P1_ALTSEL0|=0x04;
-                       *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x04;
-                       *AMAZON_GPIO_P1_OD|=0x04;
-                       
-                       for(i=0;i<2;i++){
-                               for(j=0;j<256;j++)
-                                       sampledata[i*256+j]=j;
-                       }
-                       
-                       pcm_start_addr = lon;
-                       
-                       printk("\n\n pcm_start_addr is %8x", lon);
-                       
-                       for(i=0;i<PCM_CHANNEL_NUM;i++){
-#ifdef PCM_ACCESS_DEBUG
-                               meiDebugRead_16((pcm_start_addr+i*16), (u32*)(pcm_data+i), 4);
-#else
-                               meiDMARead_16((pcm_start_addr+i*16), (u32*)(pcm_data+i), 4);
-#endif
-                               if((pcm_data[i].S!=8)||(pcm_data[i].len<1)||(pcm_data[i].rdindex!=0)||(pcm_data[i].wrindex!=0)||(pcm_data[i].flow!=0))
-                                       printk("\n\n pcm_data fill in wrongly\n\n");
-                               printk("\npcm_data %d",i);
-                               printk("\n S = %d", pcm_data[i].S);
-                               printk("\n LSW = %4x", pcm_data[i].LSW);
-                               printk("\n MSW = %4x", pcm_data[i].MSW);
-                               printk("\n len = %d", pcm_data[i].len);
-                               printk("\n rdindex = %d", pcm_data[i].rdindex);
-                               printk("\n wrindex = %d", pcm_data[i].wrindex); 
-                               printk("\n flow = %d", pcm_data[i].flow);                               
-                               pcm_data[i].finish=0;   
-                               if(i%2==0){//tx channel
-                                       for(j=0;j<PCM_BUFF_SIZE/256;j++){
-                                               for(k=0;k<256;k++){
-                                                       pcm_data[i].buff[j*256+k]=k;
-                                               /*      if(k%2==0)
-                                                               pcm_data[i].buff[j*256+k]=0xaa;
-                                                       else
-                                                               pcm_data[i].buff[j*256+k]=0x55;*/
-                                               }
-                                       }
-#ifdef PCM_ACCESS_DEBUG
-                                       meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),((pcm_data[i].len/4)/2));//fill half first
-//                                     meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),2);//fill half first
-#else
-                                       meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),((pcm_data[i].len/4)/2));//fill half first
-//                                     meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),2);//fill half first
-#endif
-                                       pcm_data[i].point=(pcm_data[i].len)/2;
-//                                     pcm_data[i].point=8;
-#ifdef PCM_ACCESS_DEBUG
-                                       meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
-#else
-                                       meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
-#endif
-                                       temp = (temp &0xffff) + (((u32)(pcm_data[i].point))<<16);
-#ifdef PCM_ACCESS_DEBUG
-                                       meiDebugWrite_16(pcm_start_addr+i*16+12,&temp, 1);//update wrindex
-#else
-                                       meiDMAWrite_16(pcm_start_addr+i*16+12,&temp, 1);//update wrindex
-#endif
-                               }
-                               else{// rx channel
-                                       pcm_data[i].point=0;
-                               }
-                       }
-                       break;
-               case AMAZON_MEI_PCM_START_TIMER:
-                               /* GPTU timer 6 */
-                       /* enable the timer in the PMU */
-                       *(AMAZON_PMU_PWDCR) = (*(AMAZON_PMU_PWDCR))| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI;
-                       /* setup the GPTU for timer tick  f_fpi == f_gptu*/
-                       *(AMAZON_GPTU_CLC) = 0x100;
-                       //reload value = fpi/(HZ * P), timer mode, Prescaler = 4 ( T6I = 000, T6BPS2 = 0)
-                       *(AMAZON_GPTU_CAPREL) = (int)(117500000/(lon*4));       
-                       *(AMAZON_GPTU_T6CON) = 0x80C0;
-                       
-                       if (request_irq(AMAZON_TIMER6_INT, amazon_timer6_interrupt_MEI,0, "hrt", NULL)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\n unable to register irq for hrt!!!");
-#endif
-                               return -1;
-                       }
-                       enable_irq(AMAZON_TIMER6_INT);
-                       break;
-               case AMAZON_MEI_PCM_STOP_TIMER:
-                       disable_irq(AMAZON_TIMER6_INT);
-                       free_irq(AMAZON_TIMER6_INT, NULL);
-                       break;
-               case AMAZON_MEI_PCM_CHECK:
-                       for(i=0;i<PCM_CHANNEL_NUM;i++){
-                               if(pcm_data[i].finish!=1)
-                                       return 0;       
-                       }
-                       for(i=0;i<PCM_CHANNEL_NUM/2;i++){
-                               j=0;
-                               while(1){
-                                       if((pcm_data[i*2+1].buff[j]==0x0) && (pcm_data[i*2+1].buff[j+1]==0x1)&& (pcm_data[i*2+1].buff[j+2]==0x2))
-                                               break;
-                                       else
-                                               j++;
-                               }
-                               printk("\n j=%d", j);
-                               temp=0;
-                               for(k=0;k<((PCM_BUFF_SIZE-j)/4);k++){
-                                       if(memcmp(pcm_data[i*2].buff+k*4, pcm_data[i*2+1].buff+j+k*4, 4)!=0){
-                                               temp++;
-                                               printk("\n\n%2x %2x %2x %2x %2x %2x %2x %2x\n\n", *((u8*)(pcm_data[i*2].buff+k*4)), *((u8*)(pcm_data[i*2].buff+k*4+1)),*((u8*)(pcm_data[i*2].buff+k*4+2)),*((u8*)(pcm_data[i*2].buff+k*4+3)),*((u8*)(pcm_data[i*2+1].buff+j+k*4)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+1)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+2)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+3)));
-                                               break;
-                                       }
-                               }
-                               if(temp!=0)
-                                       printk("\n\n Channel pair %d not match: err32 %d\n\n", i, temp);
-                               else
-                                       printk("\n\n Channel pair %d match\n\n", i);
-                       }
-                       for(i=0;i<PCM_CHANNEL_NUM;i++){
-                               if(i%2==1){//rx channel
-#ifdef PCM_ACCESS_DEBUG
-                                       meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
-#else
-                                       meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
-#endif
-                                       printk("\n\nRx channel %d: Overflow Bytes %d", i, (temp&0xffff));       
-                               }
-                               else{//tx channel
-#ifdef PCM_ACCESS_DEBUG
-                                       meiDebugRead_16(pcm_start_addr+i*16, &temp, 1);
-#else
-                                       meiDMARead_16(pcm_start_addr+i*16, &temp, 1);
-#endif
-                                       printk("\n\nElectra Err: %d",(temp&0xffff));            
-                               }
-                       }
-                       //check electra overflow
-                       
-                       meierr=1;
-                       break;
-               case AMAZON_MEI_PCM_GETDATA:
-                       copy_to_user(lon, pcm_data[1].buff, PCM_BUFF_SIZE);
-                       break;
-               case AMAZON_MEI_PCM_GPIO:
-                       //gpio
-                       
-                       *AMAZON_GPIO_P0_DIR |=1<<15;
-                       *AMAZON_GPIO_P0_ALTSEL0 |=1<<15;
-                       *AMAZON_GPIO_P0_ALTSEL1 &=~(1<<15);
-                       *AMAZON_GPIO_P0_OD |=1<<15;
-                                                                                
-                       /*GPIO 16 TDM_DI*/
-                       *AMAZON_GPIO_P1_DIR &=~1;
-                       *AMAZON_GPIO_P1_ALTSEL0 |=1;
-                       *AMAZON_GPIO_P1_ALTSEL1 &=~1;
-                                                                                
-                       /*GPIO 17 TDM_DCL */
-                       *AMAZON_GPIO_P1_DIR|=0x02;
-                       *AMAZON_GPIO_P1_ALTSEL0|=0x02;
-                       *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x02;
-                       *AMAZON_GPIO_P1_OD|=0x02;
-                                                                                
-                       /*GPIO 18 TDM FSC*/
-                       *AMAZON_GPIO_P1_DIR|=0x04;
-                       *AMAZON_GPIO_P1_ALTSEL0|=0x04;
-                       *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x04;
-                       *AMAZON_GPIO_P1_OD|=0x04;       
-                       break;
-                       
-                       
-                       
-                               //for clearEoC
-#ifdef AMAZON_CLEAR_EOC
-               case AMAZON_MEI_GET_EOC_LEN:
-                       while(1){
-                               current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
-                               if((current_clreoc->len)>0){
-                                       copy_to_user((char *)lon, (char*)(&(current_clreoc->len)), 4);
-                                       break;  
-                               }
-                               else//wait for eoc data from higher layer
-                                       interruptible_sleep_on(&wait_queue_clreoc);     
-                       }
-                       break;
-               case AMAZON_MEI_GET_EOC_DATA:
-                       current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
-                       if((current_clreoc->len)>0){
-                               copy_to_user((char*)lon, (char*)(current_clreoc->command), current_clreoc->len);
-                               meierr=1;
-                               list_del(clreoc_list.next);     //remove and add to end of list
-                               current_clreoc->len = 0;
-                               list_add_tail(&(current_clreoc->list), &clreoc_list);
-                       }
-                       else
-                               meierr=-1;
-                       break;
-               case AMAZON_MEI_EOC_SEND:
-                       copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));
-                       eoc_skb = dev_alloc_skb(debugrdwr.iCount*4);
-                       if(eoc_skb==NULL){
-                               printk("\n\nskb alloc fail");
-                               break;
-                       }
-                       
-                       eoc_skb->len=debugrdwr.iCount*4;
-                       memcpy(skb_put(eoc_skb, debugrdwr.iCount*4), (char *)debugrdwr.buffer, debugrdwr.iCount*4);
-                       
-                       ifx_push_eoc(eoc_skb);  //pass data to higher layer
-                       break;
-#endif //#ifdef AMAZON_CLEAR_EOC
-               case AMAZON_MIB_LO_ATUC:
-                       do_gettimeofday(&time_now);
-                       if(lon&0x1){
-                               if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec)>2){
-                                       current_intvl->AtucPerfLos++;
-                                       ATUC_PERF_LOSS++;
-                                       CurrStatus.adslAtucCurrStatus = 2;
-                               }
-                               (mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec;
-                       }
-                       if(lon&0x2){
-                               if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec)>2){
-                                       current_intvl->AtucPerfLof++;
-                                       ATUC_PERF_LOFS++;
-                                       CurrStatus.adslAtucCurrStatus = 1;
-                               }
-                               (mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec;
-                       }
-                       if(!(lon&0x3))
-                               CurrStatus.adslAtucCurrStatus = 0;
-                       break;
-               case AMAZON_MIB_LO_ATUR:
-                       do_gettimeofday(&time_now);
-                       if(lon&0x1){
-                               if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec)>2){
-                                       current_intvl->AturPerfLos++;
-                                       ATUR_PERF_LOSS++;
-                                       CurrStatus.adslAturCurrStatus = 2;
-                       }
-                               (mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec;
-                       }
-                       if(lon&0x2){
-                               if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec)>2){
-                                       current_intvl->AturPerfLof++;
-                                       ATUR_PERF_LOFS++;
-                                       CurrStatus.adslAturCurrStatus = 1;
-                               }
-                               (mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec;
-                       }
-                       if(lon&0x4){
-                               if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec)>2){
-                                       current_intvl->AturPerfLpr++;
-                                       ATUR_PERF_LPR++;
-                                       CurrStatus.adslAturCurrStatus = 3;
-                               }
-                               (mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec = time_now.tv_sec;
-                       }
-                       if(!(lon&0x7))
-                               CurrStatus.adslAturCurrStatus = 0;
-                       break;
-               case AMAZON_MEI_DOWNLOAD:
-                       // DMA the boot code page(s)
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n start download pages");
-#endif
-                       for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++){
-                               if( img_hdr->page[boot_loop].p_size & BOOT_FLAG){
-                                       page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
-                                       if( page_size > 0){
-                                               meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size);
-                                       }
-                               }
-                               if( img_hdr->page[boot_loop].d_size & BOOT_FLAG){
-                                       page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
-                                       if( page_size > 0){
-                                               meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size);
-                                       }
-                               }
-                       }
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n pages downloaded");
-#endif
-                       break;
-               //509221:tc.chen start
-                case AMAZON_MEI_DEBUG_MODE:
-                        mei_debug_mode = lon;
-                       break;
-               //509221:tc.chen end
-        }
-        return meierr;
-}
-
-
-//////////////////////          Interrupt handler               /////////////////////////////////////////////////////
-static void mei_interrupt_arcmsgav(int,void *,struct pt_regs *);
-static void mei_interrupt_arcmsgav(int int1, void * void0, struct pt_regs * regs)
-{
-        u32 scratch;
-        u32 fetchpage;
-        u32 size;
-        u32 dest_addr;
-       u32 temp;
-       int i;
-        
-        meiDebugRead(ARC_MEI_MAILBOXR, &scratch, 1);
-        if(scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK)
-        {
-               if(showtime==1){
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk("\n\n Code Swap Request After ShowTime !!!");
-#endif
-               }
-               else{
-#ifdef AMAZON_MEI_DEBUG_ON
-//                     printk("\n\n Code Swap Request");
-#endif
-                       fetchpage = scratch & ~OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK;
-                       size = meiGetPage( fetchpage, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
-                       if( size > 0)
-                       {
-#ifdef AMAZON_MEI_DEBUG_ON
-//                             printk("  : prom page num %d",fetchpage);
-#endif
-                               meiDMAWrite( dest_addr, mei_arc_swap_buff, size);
-                       }
-
-                       size = meiGetPage( fetchpage, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
-                       if( size > 0)
-                       {
-#ifdef AMAZON_MEI_DEBUG_ON
-//                             printk("  : data page num %d",fetchpage);
-#endif
-                               meiDMAWrite( dest_addr, mei_arc_swap_buff, size);
-                       }
-               }
-                        //     Notify arc that mailbox read complete
-               meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
-
-               //      Tell ARC Codeswap is done
-               meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_CS_DONE);
-               asm("SYNC");
-               i=0;
-               while(i<WHILE_DELAY){
-                       meiLongwordRead(MEI_TO_ARC_INT, &temp);
-                       if((temp & MEI_TO_ARC_CS_DONE) ==0){
-#ifdef AMAZON_MEI_DEBUG_ON
-//                             printk("\n\n Code Swap Done");
-#endif
-                               break;
-                       }
-                       i++;
-                       if(i==WHILE_DELAY){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\n MEI_TO_ARC_CS_DONE not cleared by ARC");
-                               //509221:tc.chen start
-                               if (!mei_debug_mode)
-                               {
-                                       //printk("Reset Arc!\n");
-                                       //printk("AdslInitStatsData.FullInitializationCount++\n");
-                                       AdslInitStatsData.FullInitializationCount++;    
-                                       if (!showtime)
-                                       {
-                                               //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
-                                               AdslInitStatsData.FailedFullInitializationCount++;
-                                               //printk("AdslInitStatsData.LINIT_Errors++\n");
-                                               AdslInitStatsData.LINIT_Errors++;
-                                       }
-
-                                       wake_up_interruptible(&wait_queue_codeswap);    // wait up ioctl reboot
-                               }
-                               //509221:tc.chen end
-#endif
-                       }
-               }
-        }
-        else{    // normal message
-//                     printk("\n\n interrupt");       
-                        meiMailboxRead(RxMessage, MSG_LENGTH);
-                        if(cmv_waiting==1){            
-                                arcmsgav=1;
-                                cmv_waiting=0;
-                                wake_up_interruptible(&wait_queue_arcmsgav);                  
-                        }
-                        else{
-                                indicator_count++;
-                                memcpy((char *)Recent_indicator, (char *)RxMessage,  MSG_LENGTH *2);
-#ifdef ARC_READY_ACK
-                               if(((RxMessage[0]&0xff0)>>4)==D2H_AUTONOMOUS_MODEM_READY_MSG){  //check ARC ready message
-                                       
-#ifdef LOCK_RETRY
-                                       if (reboot_lock)
-                                       {
-                                           reboot_lock = 0;
-                                           up(&mei_sema);      // allow cmv access
-                                       }
-#else
-                                       up(&mei_sema);  // allow cmv access
-#endif
-                                       reboot_flag=1;
-//#ifdef ADSL_LED_SUPPORT                                      
-#if 0
-                                       led_support_check=1;//adsl led for 1.1.2.7.1.1
-                                       adsl_led_flash();//adsl led for 1.1.2.7.1.1
-#endif
-                                       wake_up_interruptible(&wait_queue_reboot);      // wait up ioctl reboot
-                               }
-#endif
-                       }                  
-        }
-//     meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
-       mask_and_ack_amazon_irq(AMAZON_MEI_INT);
-        return;
-}
-
-// 603221:tc.chen start
-////////////////////////hdlc ////////////////
-
-// get hdlc status
-static unsigned int ifx_me_hdlc_status(void)
-{
-       u16 CMVMSG[MSG_LENGTH]; 
-       int ret;
-
-       if (showtime!=1)
-               return -ENETRESET;
-       
-       makeCMV_local(H2D_CMV_READ, STAT, 14, 0, 1, NULL,CMVMSG);       //Get HDLC status 
-       ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-       if (ret != 0)
-       {
-               return -EIO;
-       }
-       return CMVMSG[4]&0x0F;
-}
-
-int ifx_me_is_resloved(int status)
-{
-       u16 CMVMSG[MSG_LENGTH];
-       int ret;
-       
-       if (status == ME_HDLC_MSG_QUEUED || status == ME_HDLC_MSG_SENT)
-               return ME_HDLC_UNRESOLVED;
-       if (status == ME_HDLC_IDLE)
-       {
-               makeCMV_local(H2D_CMV_READ, CNTL, 2, 0, 1, NULL,CMVMSG);        //Get ME-HDLC Control
-               ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-               if (ret != 0)
-               {
-                       return IFX_POP_EOC_FAIL;
-               }
-               if (CMVMSG[4]&(1<<0))
-               {
-                       return ME_HDLC_UNRESOLVED;
-               }
-               
-       }
-       return ME_HDLC_RESOLVED;
-}
-
-int _ifx_me_hdlc_send(unsigned char *hdlc_pkt,int len,int max_length)
-{
-       int ret;
-       u16 CMVMSG[MSG_LENGTH];
-       u16 data=0;
-       u16 pkt_len=len;
-       if (pkt_len > max_length)
-       {
-               printk("Exceed maximum eoc message length\n");
-               return -ENOBUFS;
-       }
-       //while(pkt_len > 0)
-       {               
-               makeCMV_local(H2D_CMV_WRITE, INFO, 81, 0, (pkt_len+1)/2,(u16 *)hdlc_pkt,CMVMSG);        //Write clear eoc message to ARC
-               ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-               if (ret != 0)
-               {
-                       return -EIO;
-               }
-               
-               makeCMV_local(H2D_CMV_WRITE, INFO, 83, 2, 1,&pkt_len,CMVMSG);   //Update tx message length
-               ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-               if (ret != 0)
-               {
-                       return -EIO;
-               }
-               
-               data = (1<<0);
-               makeCMV_local(H2D_CMV_WRITE, CNTL, 2, 0, 1,&data,CMVMSG);       //Start to send
-               ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-               if (ret != 0)
-               {
-                       return -EIO;
-               }
-               return 0;
-       }
-}
-
-static int ifx_me_hdlc_send(unsigned char *hdlc_pkt,int hdlc_pkt_len)
-{
-       int hdlc_status=0;
-       u16 CMVMSG[MSG_LENGTH];
-       int max_hdlc_tx_length=0,ret=0,retry=0;
-       
-       while(retry<10)
-       {
-               hdlc_status = ifx_me_hdlc_status();
-               if (ifx_me_is_resloved(hdlc_status)==ME_HDLC_RESOLVED) // arc ready to send HDLC message
-               {
-                       makeCMV_local(H2D_CMV_READ, INFO, 83, 0, 1, NULL,CMVMSG);       //Get Maximum Allowed HDLC Tx Message Length
-                       ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-                       if (ret != 0)
-                       {
-                               return -EIO;
-                       }
-                       max_hdlc_tx_length = CMVMSG[4];
-                       ret = _ifx_me_hdlc_send(hdlc_pkt,hdlc_pkt_len,max_hdlc_tx_length);
-                       return ret;
-               }
-               set_current_state(TASK_INTERRUPTIBLE);
-               schedule_timeout(10);
-       }
-       return -EBUSY;
-}
-
-int ifx_mei_hdlc_read(char *hdlc_pkt,int max_hdlc_pkt_len)
-{
-       u16 CMVMSG[MSG_LENGTH]; 
-       int msg_read_len,ret=0,pkt_len=0,retry = 0;
-               
-       while(retry<10)
-       {
-               ret = ifx_me_hdlc_status();
-               if (ret == ME_HDLC_RESP_RCVD)
-               {
-                       int current_size=0;
-                       makeCMV_local(H2D_CMV_READ, INFO, 83, 3, 1, NULL,CMVMSG);       //Get EoC packet length
-                       ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-                       if (ret != 0)
-                       {
-                               return -EIO;
-                       }
-       
-                       pkt_len = CMVMSG[4];
-                       if (pkt_len > max_hdlc_pkt_len)
-                       {
-                               ret = -ENOMEM;
-                               goto error;
-                       }
-                       while( current_size < pkt_len)
-                       {
-                               if (pkt_len - current_size >(MSG_LENGTH*2-8))
-                                       msg_read_len = (MSG_LENGTH*2-8);
-                               else
-                                       msg_read_len = pkt_len - (current_size);
-                               makeCMV_local(H2D_CMV_READ, INFO, 82, 0 + (current_size/2), (msg_read_len+1)/2, NULL,CMVMSG);   //Get hdlc packet
-                               ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-                               if (ret != 0)
-                               {
-                                       goto error;
-                               }
-                               memcpy(hdlc_pkt+current_size,&CMVMSG[4],msg_read_len);
-                               current_size +=msg_read_len;
-                       }
-                       ret = current_size;
-                       break;
-               }else
-               {
-                       ret = -ENODATA;
-               }
-               
-               retry++;
-               set_current_state(TASK_INTERRUPTIBLE);
-               schedule_timeout(10);
-               
-       }
-       return ret;
-error:
-       
-       return ret;
-}
-
-////////////////////////hdlc ////////////////
-// 603221:tc.chen end
-
-/////////////////////// clearEoC, int ifx_pop_eoc(sk_buff * pkt)  //////////
-int ifx_pop_eoc(struct sk_buff * pkt);
-int ifx_pop_eoc(struct sk_buff * pkt)
-{
-       amazon_clreoc_pkt * current;
-       if(showtime!=1){
-               dev_kfree_skb(pkt);
-               return IFX_POP_EOC_FAIL;
-       }
-       if((pkt->len)>clreoc_max_tx_len){
-               dev_kfree_skb(pkt);
-               return IFX_POP_EOC_FAIL;
-       }
-       current = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
-       while(1){
-               if(current->len==0){
-                       memcpy(current->command, pkt->data, pkt->len);
-                       current->len=pkt->len;
-                       break;
-               }
-               else{
-                       if((current->list).next==&clreoc_list){
-                               dev_kfree_skb(pkt);
-                               return IFX_POP_EOC_FAIL;        //buffer full
-                       }
-                       current = list_entry((current->list).next,amazon_clreoc_pkt, list);
-               }
-       }       
-       wake_up_interruptible(&wait_queue_clreoc);
-       
-       dev_kfree_skb(pkt);
-       return IFX_POP_EOC_DONE;
-}      
-/*  this is used in circular fifo mode */
-/*
-int ifx_pop_eoc(sk_buff * pkt);
-int ifx_pop_eoc(sk_buff * pkt)
-{
-       int buff_space,i;
-       if(showtime!=1)
-               return IFX_POP_EOC_FAIL;
-       
-       if(clreoc_wr>=clreoc_rd)
-               buff_space = (MEI_CLREOC_BUFF_SIZE-1)-(clreoc_wr - clreoc_rd);
-       else
-               buff_space = clreoc_rd - clreoc_wr - 1;
-       if((pkt->len)>buff_space)
-               return IFX_POP_EOC_FAIL;
-                                       
-       if((clreoc_wr+pkt->len)>MEI_CLREOC_BUFF_SIZE){
-               memcpy((clreoc+clreoc_wr), pkt->data, ((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1));
-               memcpy(clreoc, (pkt->data)+((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1), (pkt->len)-((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1)); 
-               clreoc_wr=(clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE;
-       }       
-       else{
-               memcpy((clreoc+clreoc_wr), pkt->data, pkt->len);
-               if((clreoc_wr+pkt->len)=MEI_CLREOC_BUFF_SIZE)
-                       clreoc_wr=0;
-               else
-                       clreoc_wr+=pkt->len;
-       }
-       wake_up_interruptible(&wait_queue_clreoc);
-       return IFX_POP_EOC_DONE;                        
-}
-*/
-
-
-////////////////////////////////////////////////////////////////////////////
-//int amazon_mei_init_module (void);
-//void amazon_mei_cleanup_module (void);
-//int __init init_module (void);
-//void __exit cleanup_module (void);
-
-int __init amazon_mei_init_module(void)
-//int __init init_module(void)
-{
-        struct proc_dir_entry *entry;
-        int i;
-       
-//dying gasp-start     
-#ifdef IFX_DYING_GASP
-
-//000003:fchang Start
-#ifdef CONFIG_CPU_AMAZON_E
-               //GPIO31 :dying gasp event indication
-               //      (1) logic high: dying gasp event is false (default)
-               //      (2) logic low: dying gasp event is true
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B18)), 0x4);
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B1c)), 0x4);
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B20)), 0x4);
-                       SET_BIT((*((volatile u32 *)0xB0100B24)), 0x4);
-                       asm("SYNC");                    
-#else //000003:fchang End
-
-               //GPIO31 :dying gasp event indication
-               //      (1) logic high: dying gasp event is false (default)
-               //      (2) logic low: dying gasp event is true
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000);
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000);
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000);
-                       SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000);
-#if 0                  
-//warning-led-start    
-//GPIO 22              
-                       SET_BIT ((*((volatile u32 *)0xB0100B48)), 0x40);
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x40);
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x40);
-                       SET_BIT((*((volatile u32 *)0xB0100B54)), 0x40);                 
-                       CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //GPIO ON
-                       printk("LED ON ON ON ON ON ON.....");
-//warning-led-end                      
-#endif
-                       asm("SYNC");    
-#endif //000003:fchang
-
-#endif //IFX_DYING_GASP        
-//dying gasp -end        
-        
-       
-        reg_entry_t regs_temp[PROC_ITEMS] =                                     // Items being debugged
-        {
-        /*     {       flag,          name,          description } */
-       { &arcmsgav, "arcmsgav", "arc to mei message ", 0 },
-            { &cmv_reply, "cmv_reply", "cmv needs reply", 0},
-            { &cmv_waiting, "cmv_waiting", "waiting for cmv reply from arc", 0},
-            { &indicator_count, "indicator_count", "ARC to MEI indicator count", 0},
-            { &cmv_count, "cmv_count", "MEI to ARC CMVs", 0},
-            { &reply_count, "reply_count", "ARC to MEI Reply", 0},
-            { (int *)Recent_indicator, "Recent_indicator", "most recent indicator", 0},
-           { (int *)8, "version", "version of firmware", 0},
-        };
-        memcpy((char *)regs, (char *)regs_temp, sizeof(regs_temp));
-
-
-        //sema_init(&mei_sema, 0);  // semaphore initialization, mutex
-        sema_init(&mei_sema, 1);  // semaphore initialization, mutex
-       
-        init_waitqueue_head(&wait_queue_arcmsgav);             // for ARCMSGAV
-       init_waitqueue_head(&wait_queue_codeswap);              // for codeswap daemon
-       init_waitqueue_head(&wait_queue_mibdaemon);             // for mib daemon
-       init_waitqueue_head(&wait_queue_reboot);                // for ioctl reboot 
-       init_waitqueue_head(&wait_queue_clreoc);                // for clreoc_wr function
-       init_waitqueue_head(&wait_queue_loop_diagnostic);               // for loop diagnostic function
-#ifdef ADSL_LED_SUPPORT        
-       init_waitqueue_head(&wait_queue_led);                   // adsl led for led function
-       init_waitqueue_head(&wait_queue_led_polling);           // adsl led for led function
-       led_task.routine = adsl_led_flash_task;                 // adsl led for led function
-       led_poll_init();                                        // adsl led for led function
-#endif //ADSL_LED_SUPPORT
-#ifdef IFX_DYING_GASP  
-       init_waitqueue_head(&wait_queue_dying_gasp);            // IFX_DYING_GASP
-       lop_poll_init();                                        // IFX_DYING_GASP 
-#endif //IFX_DYING_GASP
-       init_waitqueue_head(&wait_queue_uas_poll);//joelin 04/16/2005
-       unavailable_seconds_poll_init();//joelin 04/16/2005
-       memset(&mib_pflagtime, 0, (sizeof(mib_flags_pretime)));
-       
-       // initialize link list for intervals
-       mei_mib = (amazon_mei_mib *)kmalloc((sizeof(amazon_mei_mib)*INTERVAL_NUM), GFP_KERNEL);
-       if(mei_mib == NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
-               printk("kmalloc error for amazon_mei_mib\n\n");
-#endif
-               return -1;
-       }
-       memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM));
-       INIT_LIST_HEAD(&interval_list);
-       for(i=0;i<INTERVAL_NUM;i++)
-               list_add_tail(&(mei_mib[i].list), &interval_list); 
-       current_intvl = list_entry(interval_list.next, amazon_mei_mib, list);
-       do_gettimeofday(&(current_intvl->start_time)); 
-       // initialize clreoc list
-       clreoc_pkt = (amazon_clreoc_pkt *)kmalloc((sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE), GFP_KERNEL);
-       if(clreoc_pkt == NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
-               printk("kmalloc error for clreoc_pkt\n\n");
-#endif
-               return -1;
-       }
-       memset(clreoc_pkt, 0, (sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE));
-       INIT_LIST_HEAD(&clreoc_list);
-       for(i=0;i<CLREOC_BUFF_SIZE;i++)
-               list_add_tail(&(clreoc_pkt[i].list), &clreoc_list);
-               
-        memset(&AdslInitStatsData, 0, sizeof(AdslInitStatsData));
-        if (register_chrdev(major, "amazon_mei", &mei_operations)!=0) {
-#ifdef AMAZON_MEI_DEBUG_ON
-                printk("\n\n unable to register major for amazon_mei!!!");
-#endif
-                return -1;
-        }
-        if (request_irq(AMAZON_MEI_INT, mei_interrupt_arcmsgav,0, "amazon_mei_arcmsgav", NULL)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
-                printk("\n\n unable to register irq for amazon_mei!!!");
-#endif
-                return -1;
-        }
-//        disable_irq(AMAZON_MEI_INT);
-       enable_irq(AMAZON_MEI_INT);
-        // procfs
-        meidir=proc_mkdir(MEI_DIRNAME, &proc_root);
-        if ( meidir == NULL) {
-#ifdef AMAZON_MEI_DEBUG_ON
-               printk(KERN_ERR ": can't create /proc/" MEI_DIRNAME "\n\n");
-#endif
-               return(-ENOMEM);
-        }
-
-        for(i=0;i<NUM_OF_REG_ENTRY;i++) {
-               entry = create_proc_entry(regs[i].name,
-                               S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH,
-                               meidir);
-               if(entry) {
-                       regs[i].low_ino = entry->low_ino;
-                       entry->proc_fops = &proc_operations;
-               } else {
-#ifdef AMAZON_MEI_DEBUG_ON
-                       printk( KERN_ERR 
-                               ": can't create /proc/" MEI_DIRNAME
-                               "/%s\n\n", regs[i].name);
-#endif
-                       return(-ENOMEM);
-               }
-        }
-        ///////////////////////////////// register net device ////////////////////////////
-        if(register_netdev(&phy_mei_net)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
-                printk("\n\n Register phy Device Failed.");
-#endif
-                return -1;
-        }
-/*
-       if(register_netdev(&interleave_mei_net)!=0){
-                printk("\n\n Register interleave Device Failed.");
-                return -1;
-        }
-       if(register_netdev(&fast_mei_net)!=0){
-                printk("\n\n Register fast Device Failed.");
-                return -1;
-        }
-*/
-#ifdef DFE_LOOPBACK
-       mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL);
-       if (mei_arc_swap_buff){
-#ifdef ARC_READY_ACK
-               if(down_interruptible(&mei_sema))       //disable CMV access until ARC ready
-               {
-                       return -ERESTARTSYS;
-               }
-#ifdef LOCK_RETRY
-               reboot_lock = 1;
-#endif
-#endif
-               meiForceRebootAdslModem();
-               kfree(mei_arc_swap_buff);
-       }else{
-#ifdef AMAZON_MEI_DEBUG_ON
-               printk("cannot load image: no memory\n\n");
-#endif
-       }
-#endif
-#ifdef IFX_SMALL_FOOTPRINT
-       mib_poll_init();
-#endif
-        return 0;
-}
-
-void __exit amazon_mei_cleanup_module(void)
-//void __exit cleanup_module(void)
-{
-        int i;
-#ifdef ADSL_LED_SUPPORT        
-        stop_led_module=1;                     //wake up and clean led module 
-        led_support_check=0;//joelin , clear task
-        showtime=0;//joelin,clear task
-        //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
-        firmware_support_led=0;//joelin ,clear task
-        wake_up_interruptible(&wait_queue_led); //wake up and clean led module 
-        wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module         
-#endif        
-        for(i=0;i<NUM_OF_REG_ENTRY;i++)
-               remove_proc_entry(regs[i].name, meidir);
-        remove_proc_entry(MEI_DIRNAME, &proc_root);
-       
-        disable_irq(AMAZON_MEI_INT);
-        free_irq(AMAZON_MEI_INT, NULL);
-        unregister_chrdev(major, "amazon_mei");
-
-        kfree(mei_mib);
-       kfree(clreoc_pkt);
-       
-       kfree(phy_mei_net.priv);
-        unregister_netdev(&phy_mei_net);
-       
-        return;
-}
-#ifdef IFX_SMALL_FOOTPRINT
-
-
-int adsl_mib_poll(void *unused)
-{
-       struct task_struct *tsk = current;
-       int i=0;
-       struct timeval time_now;
-       struct timeval time_fini;
-       u32 temp,temp2;
-
-       amazon_mei_mib * mib_ptr;
-//     u16 buff[MSG_LENGTH]__attribute__ ((aligned(4)));
-       u16 * data=NULL;  //used in makeCMV, to pass in payload when CMV set, ignored when CMV read.
-
-       daemonize();
-       strcpy(tsk->comm, "kmibpoll");
-       sigfillset(&tsk->blocked);
-
-       printk("Inside mib poll loop ...\n");
-       i=0;
-       while(1){
-               if(i<MIB_INTERVAL)
-                       interruptible_sleep_on_timeout(&wait_queue_mibdaemon, ((MIB_INTERVAL-i)/(1000/HZ)));
-               i=0;
-               if(showtime==1){
-//                     printk("\n\n update mib");
-                                       
-                       do_gettimeofday(&time_now);
-                       if(time_now.tv_sec - current_intvl->start_time.tv_sec>=900){
-                               if(current_intvl->list.next!=&interval_list){
-                                       current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
-                                       do_gettimeofday(&(current_intvl->start_time));
-                               }
-                               else{
-                                       mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list);
-                                       list_del(interval_list.next);
-                                       memset(mib_ptr, 0, sizeof(amazon_mei_mib));
-                                       list_add_tail(&(mib_ptr->list), &interval_list);
-                                       if(current_intvl->list.next==&interval_list)
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nlink list error");
-#endif
-                                       current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
-                                       do_gettimeofday(&(current_intvl->start_time));
-                               }       
-                       }
-                                       
-                       if(down_interruptible(&mei_sema))
-                               return -ERESTARTSYS;
-/*                                             
-                       ATUC_PERF_LO_FLAG_MAKECMV;
-                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                               printk("\n\nCMV fail, Group 7 Address 0 Index 0");
-#endif
-                       }
-                       else{
-                               if(RxMessage[4]&PLAM_LOS_FailureBit){
-                                       current_intvl->AtucPerfLos++;
-                                       ATUC_PERF_LOSS++;
-                                       CurrStatus.adslAtucCurrStatus = 2;
-                               }
-                               if(RxMessage[4]&PLAM_LOF_FailureBit){
-                                       current_intvl->AtucPerfLof++;
-                                       ATUC_PERF_LOFS++;
-                                       CurrStatus.adslAtucCurrStatus = 1;
-                               }
-                               if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit)))
-                                       CurrStatus.adslAtucCurrStatus = 0;
-                               }
-*/
-                               
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               ATUC_PERF_ESS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 7 Index 0");
-#endif
-                               }
-                               else{
-                                               temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfEs+=temp;
-                                                       ATUC_PERF_ESS+=temp;
-                                                       mib_pread.ATUC_PERF_ESS = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
-                                                       ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
-                                                       mib_pread.ATUC_PERF_ESS = RxMessage[4];         
-                                       }
-                               }
-/*             
-                               ATUR_PERF_LO_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 1 Index 0");
-#endif
-                               }
-                               else{
-                                       if(RxMessage[4]&PLAM_LOS_FailureBit){
-                                               current_intvl->AturPerfLos++;
-                                               ATUR_PERF_LOSS++;
-                                               CurrStatus.adslAturCurrStatus = 2;
-                                       }
-                                       if(RxMessage[4]&PLAM_LOF_FailureBit){
-                                               current_intvl->AturPerfLof++;
-                                               ATUR_PERF_LOFS++;
-                                               CurrStatus.adslAturCurrStatus = 1;
-                                       }
-                                       if(RxMessage[4]&PLAM_LPR_FailureBit){
-                                               current_intvl->AturPerfLpr++;
-                                               ATUR_PERF_LPR++;
-                                               CurrStatus.adslAturCurrStatus = 3;
-                                       }
-                                       if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit)))
-                                               CurrStatus.adslAturCurrStatus = 0;      
-                               }
-*/
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               ATUR_PERF_ESS_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 33 Index 0");
-#endif
-                               }
-                               else{
-                                               temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS;
-                                               if(temp>=0){
-                                                       current_intvl->AturPerfEs+=temp;
-                                                       ATUR_PERF_ESS+=temp;
-                                                       mib_pread.ATUR_PERF_ESS = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
-                                                       ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
-                                                       mib_pread.ATUR_PERF_ESS=RxMessage[4];
-                                       }
-                               }
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               // to update rx/tx blocks
-                               ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 20 Index 0");
-#endif
-                               }
-                               else{
-                                               temp = RxMessage[4];    
-                               }
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 21 Index 0");
-#endif
-                               }
-                               else{
-                                               temp2 = RxMessage[4];   
-                                       }       
-                                       if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){
-                                               current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
-                                               ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
-                                               mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
-                                       }
-                                       else{
-                                               current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
-                                               ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
-                                               mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
-                               }
-                               current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk;
-                               ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK;
-/*                                     
-                               ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
-                                       printk("\n\nCMV fail, Group 7 Address 20 Index 0");
-                               else{
-                                       if(RxMessage[4]){
-                                               current_intvl->AturChanPerfTxBlk+=RxMessage[4];
-                                               ATUR_CHAN_TX_BLK+=RxMessage[4];
-                                       }       
-                               }
-                               ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
-                                       printk("\n\nCMV fail, Group 7 Address 21 Index 0");
-                               else{
-                                       if(RxMessage[4]){
-                                               current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16);
-                                               ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16);
-                                       }       
-                               }
-*/                                     
-                               if(chantype.interleave == 1){
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                                       ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 3 Index 0");
-#endif
-                                       }
-                                       else{
-                                                       temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL;
-                                                       if(temp>=0){
-                                                               current_intvl->AturChanPerfCorrBlk+=temp;
-                                                               ATUR_CHAN_CORR_BLK+=temp;
-                                                               mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
-                                                       }       
-                                                       else{
-                                                               current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
-                                                               ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
-                                                               mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];       
-                                               }       
-                                       }       
-                               }
-                               else if(chantype.fast == 1){
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                                       ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 3 Index 1");
-#endif
-                                       }
-                                       else{
-                                                       temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST;
-                                                       if(temp>=0){
-                                                               current_intvl->AturChanPerfCorrBlk+=temp;
-                                                               ATUR_CHAN_CORR_BLK+=temp;
-                                                               mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
-                                                       }       
-                                                       else{
-                                                               current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
-                                                               ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
-                                                               mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
-                                               }       
-                                       }               
-                               }
-                               
-                               if(chantype.interleave == 1){
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                                       ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 2 Index 0");
-#endif
-                                       }
-                                       else{
-                                                       temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL;
-                                                       if(temp>=0){
-                                                               current_intvl->AturChanPerfUncorrBlk+=temp;
-                                                               ATUR_CHAN_UNCORR_BLK+=temp;
-                                                               mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
-                                                       }
-                                                       else{
-                                                               current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
-                                                               ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
-                                                               mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
-                                               }
-                                       }               
-                               }
-                               else if(chantype.fast == 1){
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                                       ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST;
-                                       if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                               printk("\n\nCMV fail, Group 7 Address 2 Index 1");
-#endif
-                                       }
-                                       else{
-                                                       temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST;
-                                                       if(temp>=0){
-                                                               current_intvl->AturChanPerfUncorrBlk+=temp;
-                                                               ATUR_CHAN_UNCORR_BLK+=temp;
-                                                               mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
-                                                       }
-                                                       else{
-                                                               current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
-                                                               ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
-                                                               mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
-                                               }
-                                       }               
-                               }
-                                       
-                               //RFC-3440
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //???
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 0 Address 0 Index 0");
-#endif
-                               }
-                               else{
-                                               temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatFastR+=temp;
-                                                       ATUC_PERF_STAT_FASTR+=temp;
-                                                       mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
-                                                       ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
-                                                       mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
-                                       }
-                               }
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //???
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 0 Address 0 Index 0");
-#endif
-                               }
-                               else{
-                                               temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatFailedFastR+=temp;
-                                                       ATUC_PERF_STAT_FAILED_FASTR+=temp;
-                                                       mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
-                                                       ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
-                                                       mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
-                                       }
-                               }
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               ATUC_PERF_STAT_SESL_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 8 Index 0");
-#endif
-                               }
-                               else{
-                                               temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatSesL+=temp;
-                                                       ATUC_PERF_STAT_SESL+=temp;
-                                                       mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
-                                                       ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
-                                                       mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
-                                       }
-                               }
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               ATUC_PERF_STAT_UASL_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 10 Index 0");
-#endif
-                               }
-                               else{
-                                               temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatUasL+=temp;
-                                                       ATUC_PERF_STAT_UASL+=temp;
-                                                       mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
-                                                       ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
-                                                       mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
-                                       }
-                               }
-                               if(showtime!=1)
-                                       goto mib_poll_end;
-                               ATUR_PERF_STAT_SESL_FLAG_MAKECMV;
-                               if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-                                       printk("\n\nCMV fail, Group 7 Address 34 Index 0");
-#endif
-                               }
-                               else{
-                                               temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL;
-                                               if(temp>=0){
-                                                       current_intvl->AtucPerfStatUasL+=temp;
-                                                       ATUC_PERF_STAT_UASL+=temp;
-                                                       mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
-                                               }
-                                               else{
-                                                       current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
-                                                       ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
-                                                       mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
-                                       }
-                               }
-                                       
-#endif
-mib_poll_end:
-                               up(&mei_sema);
-                               
-                               do_gettimeofday(&time_fini);
-                               i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000))  ; //msec 
-                       }//showtime==1
-               }        
-       
-}
-int mib_poll_init(void)
-{
-       printk("Starting mib_poll...\n");
-
-       kernel_thread(adsl_mib_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
-       return 0;
-}
-#endif //IFX_SMALL_FOOTPRINT
-//EXPORT_NO_SYMBOLS;
-
-#ifdef ADSL_LED_SUPPORT
-// adsl led -start
-int led_status_on=0,led_need_to_flash=0;
-int led_current_flashing=0;
-unsigned long led_delay=0;
-static int led_poll(void *unused)
-{
-       stop_led_module=0;      //begin polling ...
-       while(!stop_led_module){
-               if ((!led_status_on)&&(!led_need_to_flash)) interruptible_sleep_on_timeout (&wait_queue_led_polling,1000); //10 seconds timeout for waiting wakeup
-//                     else printk("direct running task, no waiting");
-               run_task_queue(&tq_ifx_led);//joelin task
-//     printk("led and LOP polling...\n");
-               }
-       return 0;       
-}      
-static int led_poll_init(void)
-{
-//     printk("Starting adsl led polling...\n");
-
-//warning-led-start
-//     CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
-//warning-led-end
-
-       kernel_thread(led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
-       return 0;
-}
-
-int adsl_led_flash(void)
-{      
-       int i;
-       if (!firmware_support_led)      return 0;       //joelin version check 
-
-       if (led_status_on == 0 && led_need_to_flash == 0)
-       {
-               queue_task(&led_task, &tq_ifx_led);//joelin task
-               wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module 
-//             printk("queue Task 1...\n");    //joelin  test  
-       }
-       led_need_to_flash=1;//asking to flash led
-
-       return 0;
-}
-
-int adsl_led_flash_task(void *ptr)
-{
-
-       u16     one=1;
-       u16     zero=0;
-       u16     data=0x0600;
-       int kernel_use=1;
-       u16 CMVMSG[MSG_LENGTH];                                                                           
-//adsl-led-start for >v1.1.2.7.1.1
-//     printk("Task Running...\n");    //joelin  test
-       if ((firmware_support_led==2)&&(led_support_check))
-       {
-       led_support_check=0;
-       data=0x0600;
-       makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &data,CMVMSG);     //configure GPIO9 GPIO10 as outputs
-       mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-
-       makeCMV_local(H2D_CMV_WRITE, INFO, 91, 2, 1, &data,CMVMSG);     //enable writing to bit 9 and bit10
-       mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-       
-       data=0x0a01;
-       makeCMV_local(H2D_CMV_WRITE, INFO, 91, 4, 1, &data,CMVMSG);     //use GPIO10 for TR68 .Enable and don't invert.
-       mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);      
-       
-#ifdef DATA_LED_ON_MODE        
-       data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on.
-#else
-       data=0x0900;
-#endif 
-       makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG);     //use GPIO9 for TR68 data led .turn off.
-       mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);              
-       
-       }
-       if (!showtime) {led_need_to_flash=0; return 0;} 
-//adsl-led-end for >v1.1.2.7.1.1
-
-       if (led_status_on == 0 || led_need_to_flash == 1)
-       {
-
-               if (led_current_flashing==0)
-               {
-                       if (firmware_support_led==1){//>1.1.2.3.1.1
-                       makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &one,CMVMSG);      //flash
-                       mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);     
-               }
-                       else if (firmware_support_led==2){//>1.1.2.7.1.1
-                               data=0x0901;//flash
-                               makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG);     //use GPIO9 for TR68 data led .flash.
-                               mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);                     
-                               
-                       }//(firmware_support_led==2)
-                       led_current_flashing = 1;//turn on led
-               }
-               led_status_on=1;
-
-               do{//do nothing , waiting untill no data traffic 
-                       led_need_to_flash=0;
-                       interruptible_sleep_on_timeout(&wait_queue_led, 25); //the time for LED Off , if no data traffic                         
-               }while(led_need_to_flash==1);
-               
-       }else if (led_status_on == 1 && led_need_to_flash==0)
-       {
-               if (led_current_flashing==1)
-               {//turn off led
-                       if (firmware_support_led==1){//>1.1.2.3.1.1
-                       makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &zero,CMVMSG);//off        
-                       mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
-                       }       //>1.1.2.3.1.1          
-                       else if (firmware_support_led==2){//>1.1.2.7.1.1
-#ifdef DATA_LED_ON_MODE                                        
-                               data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on.
-#else
-                               data=0x0900;//off
-#endif                         
-                               makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG);     //use GPIO9 for TR68 data led .off.
-                       mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
-                               
-                       }//(firmware_support_led==2)
-                       led_status_on=0;
-                       led_current_flashing = 0;
-               }
-               }
-       
-       if (led_status_on == 1 || led_need_to_flash)
-       {//led flash job on going or led need to flash 
-               queue_task(&led_task, &tq_ifx_led);     //joelin task   
-//             printk("queue Task 2...\n");    //joelin  test  
-       }
-       return 0;
-}
-//joelin adsl led-end
-#else 
-int adsl_led_flash(void)
-{
-       return 0;
-}
-#endif //ADSL_LED_SUPPORT
-#ifdef IFX_DYING_GASP
-static int lop_poll(void *unused)
-{
-       
-       while(1)
-       {
-       interruptible_sleep_on_timeout(&wait_queue_dying_gasp, 1); 
-#ifdef CONFIG_CPU_AMAZON_E //000003:fchang
-        if(showtime&&((*((volatile u32 *)0xB0100B14))&0x4)==0x0)       {//000003:fchang
-#else //000003:fchang
-       if(showtime&&((*((volatile u32 *)0xB0100B44))&0x8000)==0x0)     {
-#endif //CONFIG_CPU_AMAZON_E
-               mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_WRITEDEBUG, &lop_debugwr);
-               printk("send dying gasp..\n");}
-               
-       }
-       return 0;       
-       }
-static int lop_poll_init(void)
-{
-//     printk("Starting LOP polling...\n");
-       kernel_thread(lop_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
-       return 0;
-}
-
-#endif //IFX_DYING_GASP
-
-//joelin 04/16/2005-satrt
-static int unavailable_seconds_poll(void *unused)
-{
-       while(1){
-               interruptible_sleep_on_timeout (&wait_queue_uas_poll,100); //1 second timeout for waiting wakeup
-               if (!showtime) unavailable_seconds++;
-       }
-       return 0;       
-}      
-static int unavailable_seconds_poll_init(void)
-{
-  
-       kernel_thread(unavailable_seconds_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
-       return 0;
-}
-
-
-//joelin 04/16/2005-end
-EXPORT_SYMBOL(meiDebugWrite);
-EXPORT_SYMBOL(ifx_pop_eoc);
-
-MODULE_LICENSE("GPL");
-
-module_init(amazon_mei_init_module);
-module_exit(amazon_mei_cleanup_module);
-
diff --git a/target/linux/amazon/files/drivers/char/ifx_ssc.c b/target/linux/amazon/files/drivers/char/ifx_ssc.c
deleted file mode 100644 (file)
index ea01659..0000000
+++ /dev/null
@@ -1,2121 +0,0 @@
-/**************************************************
- *
- * drivers/ifx/serial/ifx_ssc.c
- *
- * Driver for IFX_SSC serial ports
- *
- * Copyright (C) 2004 Infineon Technologies AG
- * Author Michael Schoenenborn (IFX COM TI BT)
- *
- */
-#define IFX_SSC_DRV_VERSION "0.2.1"
-/*
- **************************************************
- *
- * This driver was originally based on the INCA-IP driver, but due to 
- * fundamental conceptual drawbacks there has been changed a lot.
- *
- * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn <gj@denx.de>
- * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-// ### TO DO: general issues:
-//           - power management
-//           - interrupt handling (direct/indirect)
-//           - pin/mux-handling (just overall concept due to project dependency)
-//           - multiple instances capability
-//           - slave functionality
-
-/*
- * Include section 
- */
-#ifndef EXPORT_SYMTAB
-#define EXPORT_SYMTAB
-#endif
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-//#include <linux/poll.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/ifx_ssc_defines.h>
-#include <asm/amazon/ifx_ssc.h>
-
-#ifdef SSC_FRAME_INT_ENABLE
-#undef SSC_FRAME_INT_ENABLE
-#endif
-
-#define not_yet
-
-#define SPI_VINETIC
-
-/*
- * Deal with CONFIG_MODVERSIONS
- */
-#if CONFIG_MODVERSIONS==1
-# include <linux/modversions.h>
-#endif
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Michael Schoenenborn");
-MODULE_DESCRIPTION("IFX SSC driver");
-MODULE_SUPPORTED_DEVICE("ifx_ssc");
-MODULE_PARM(maj, "i");
-MODULE_PARM_DESC(maj, "Major device number");
-
-/* allow the user to set the major device number */
-static int maj = 0;
-
-
-/*
- * This is the per-channel data structure containing pointers, flags
- * and variables for the port. This driver supports a maximum of PORT_CNT.
- * isp is allocated in ifx_ssc_init() based on the chip version.
- */
-static struct ifx_ssc_port *isp;
-
-/* prototypes for fops */
-static ssize_t ifx_ssc_read(struct file *, char *, size_t, loff_t *);
-static ssize_t ifx_ssc_write(struct file *, const char *, size_t, loff_t *);
-//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *);
-int ifx_ssc_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-int ifx_ssc_open(struct inode *, struct file *);
-int ifx_ssc_close(struct inode *, struct file *);
-
-/* other forward declarations */
-static unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info);
-static void ifx_ssc_rx_int(int, void *, struct pt_regs *);
-static void ifx_ssc_tx_int(int, void *, struct pt_regs *);
-static void ifx_ssc_err_int(int, void *, struct pt_regs *);
-#ifdef SSC_FRAME_INT_ENABLE
-static void ifx_ssc_frm_int(int, void *, struct pt_regs *);
-#endif
-static void tx_int(struct ifx_ssc_port *);
-static int ifx_ssc1_read_proc(char *, char **, off_t, int, int *, void *);
-static void ifx_gpio_init(void);
-/************************************************************************
- *  Function declaration
- ************************************************************************/
-//interrupt.c
-extern unsigned int amazon_get_fpi_hz(void);
-extern void disable_amazon_irq(unsigned int irq_nr);
-extern void enable_amazon_irq(unsigned int irq_nr);
-extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
-
-
-/*****************************************************************/
-typedef struct {
-       int (*request)(unsigned int irq, 
-                      void (*handler)(int, void *, struct pt_regs *), 
-                      unsigned long irqflags,
-                      const char * devname, 
-                      void *dev_id);
-       void (*free)(unsigned int irq, void *dev_id);
-       void (*enable)(unsigned int irq);
-       void (*disable)(unsigned int irq);
-        void (*clear)(unsigned int irq);
-} ifx_int_wrapper_t;
-
-static ifx_int_wrapper_t ifx_int_wrapper = {
-       request:        request_irq,    // IM action: enable int
-       free:           free_irq,       // IM action: disable int
-       enable:         enable_amazon_irq,
-       disable:        disable_amazon_irq,
-        clear:          mask_and_ack_amazon_irq,
-       //end:          
-};
-
-/* Fops-struct */
-static struct file_operations ifx_ssc_fops = {
-        owner:         THIS_MODULE,
-       read:           ifx_ssc_read,    /* read */
-       write:          ifx_ssc_write,   /* write */
-//        poll:                ifx_ssc_poll,    /* poll */
-        ioctl:         ifx_ssc_ioctl,   /* ioctl */
-        open:          ifx_ssc_open,    /* open */
-        release:       ifx_ssc_close,   /* release */
-};
-
-
-static inline unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info)
-{ // ATTENTION: This function assumes that the CLC register is set with the 
-  // appropriate value for RMC.
-       unsigned int rmc;
-
-       rmc = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CLC) & 
-              IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET;
-       if (rmc == 0){
-               printk("ifx_ssc_get_kernel_clk rmc==0 \n");
-               return (0);
-       }
-       return (amazon_get_fpi_hz() / rmc);
-}
-
-#ifndef not_yet
-#ifdef IFX_SSC_INT_USE_BH
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver
- * (also known as the "bottom half").  This can be called any
- * number of times for any channel without harm.
- */
-static inline void
-ifx_ssc_sched_event(struct ifx_ssc_port *info, int event)
-{
-    info->event |= 1 << event; /* remember what kind of event and who */
-    queue_task(&info->tqueue, &tq_cyclades); /* it belongs to */
-    mark_bh(CYCLADES_BH);                       /* then trigger event */
-} /* ifx_ssc_sched_event */
-
-
-/*
- * This routine is used to handle the "bottom half" processing for the
- * serial driver, known also the "software interrupt" processing.
- * This processing is done at the kernel interrupt level, after the
- * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON.  This
- * is where time-consuming activities which can not be done in the
- * interrupt driver proper are done; the interrupt driver schedules
- * them using ifx_ssc_sched_event(), and they get done here.
- *
- * This is done through one level of indirection--the task queue.
- * When a hardware interrupt service routine wants service by the
- * driver's bottom half, it enqueues the appropriate tq_struct (one
- * per port) to the tq_cyclades work queue and sets a request flag
- * via mark_bh for processing that queue.  When the time is right,
- * do_ifx_ssc_bh is called (because of the mark_bh) and it requests
- * that the work queue be processed.
- *
- * Although this may seem unwieldy, it gives the system a way to
- * pass an argument (in this case the pointer to the ifx_ssc_port
- * structure) to the bottom half of the driver.  Previous kernels
- * had to poll every port to see if that port needed servicing.
- */
-static void
-do_ifx_ssc_bh(void)
-{
-    run_task_queue(&tq_cyclades);
-} /* do_ifx_ssc_bh */
-
-static void
-do_softint(void *private_)
-{
-  struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_;
-
-    if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) {
-        wake_up_interruptible(&info->open_wait);
-        info->flags &= ~(ASYNC_NORMAL_ACTIVE|
-                             ASYNC_CALLOUT_ACTIVE);
-    }
-    if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) {
-        wake_up_interruptible(&info->open_wait);
-    }
-    if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) {
-       wake_up_interruptible(&info->delta_msr_wait);
-    }
-    if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) {
-        wake_up_interruptible(&tty->write_wait);
-    }
-#ifdef Z_WAKE
-    if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) {
-        wake_up_interruptible(&info->shutdown_wait);
-    }
-#endif
-} /* do_softint */
-#endif /* IFX_SSC_INT_USE_BH */
-#endif // not_yet
-
-inline static void
-rx_int(struct ifx_ssc_port *info)
-{
-       int             fifo_fill_lev, bytes_in_buf, i;
-       unsigned long   tmp_val;
-       unsigned long   *tmp_ptr;
-       unsigned int    rx_valid_cnt;
-       /* number of words waiting in the RX FIFO */
-       fifo_fill_lev = (READ_PERIPHERAL_REGISTER(info->mapbase + 
-                                                  IFX_SSC_FSTAT) & 
-                         IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >>
-                         IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET;
-        // Note: There are always 32 bits in a fifo-entry except for the last 
-        // word of a contigous transfer block and except for not in rx-only 
-        // mode and CON.ENBV set. But for this case it should be a convention 
-        // in software which helps:
-        // In tx or rx/tx mode all transfers from the buffer to the FIFO are 
-        // 32-bit wide, except for the last three bytes, which could be a 
-        // combination of 16- and 8-bit access.
-        // => The whole block is received as 32-bit words as a contigous stream, 
-        // even if there was a gap in tx which has the fifo run out of data! 
-        // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)!
-
-       /* free space in the RX buffer */
-       bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr;
-        // transfer with 32 bits per entry
-       while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) {
-               tmp_ptr = (unsigned long *)info->rxbuf_ptr;
-                *tmp_ptr = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB);
-                info->rxbuf_ptr += 4;
-                info->stats.rxBytes += 4;
-                fifo_fill_lev --;
-                bytes_in_buf -= 4;
-       } // while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0))
-        // now do the rest as mentioned in STATE.RXBV
-        while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) {
-                rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & 
-                                IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> 
-                        IFX_SSC_STATE_RX_BYTE_VALID_OFFSET;
-               if (rx_valid_cnt == 0) break;
-                if (rx_valid_cnt > bytes_in_buf) {
-                        // ### TO DO: warning message: not block aligned data, other data 
-                        //                             in this entry will be lost
-                        rx_valid_cnt = bytes_in_buf;
-                }
-                tmp_val = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB);
-               
-                for (i=0; i<rx_valid_cnt; i++) {               
-                       *info->rxbuf_ptr = (tmp_val >> ( 8 * (rx_valid_cnt - i-1))) & 0xff;
-/*                     
-                        *info->rxbuf_ptr = tmp_val & 0xff;
-                        tmp_val >>= 8;
-*/                     
-                       bytes_in_buf--;
-
-                       
-                       info->rxbuf_ptr++;
-                }
-                info->stats.rxBytes += rx_valid_cnt;
-        }  // while ((bytes_in_buf > 0) && (fifo_fill_lev > 0))
-
-        // check if transfer is complete
-        if (info->rxbuf_ptr >= info->rxbuf_end) {
-                ifx_int_wrapper.disable(info->rxirq);
-                /* wakeup any processes waiting in read() */
-                wake_up_interruptible(&info->rwait);
-                /* and in poll() */
-                //wake_up_interruptible(&info->pwait);
-        } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) && 
-                  (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) == 0)) {
-               // if buffer not filled completely and rx request done initiate new transfer
-/*
-               if  (info->rxbuf_end - info->rxbuf_ptr < 65536)
-*/
-               if  (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE)
-                        WRITE_PERIPHERAL_REGISTER((info->rxbuf_end - info->rxbuf_ptr) << 
-                                                 IFX_SSC_RXREQ_RXCOUNT_OFFSET, 
-                                                  info->mapbase + IFX_SSC_RXREQ);
-                else 
-                       WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, 
-                                                  info->mapbase + IFX_SSC_RXREQ);
-       }
-} // rx_int
-
-inline static void
-tx_int(struct ifx_ssc_port *info)
-{
-       
-       int fifo_space, fill, i;
-       fifo_space = ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_ID) & 
-                       IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - 
-                ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_FSTAT) & 
-                  IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >> 
-                 IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET);
-
-       if (fifo_space == 0)
-               return;
-
-       fill = info->txbuf_end - info->txbuf_ptr;
-
-       if (fill > fifo_space * 4)
-               fill = fifo_space * 4;
-
-       for (i = 0; i < fill / 4; i++) {
-                // at first 32 bit access
-               WRITE_PERIPHERAL_REGISTER(*(UINT32 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
-                info->txbuf_ptr += 4;
-       }
-
-        fifo_space -= fill / 4;
-       info->stats.txBytes += fill & ~0x3;
-        fill &= 0x3;
-        if ((fifo_space > 0) & (fill > 1)) {
-                // trailing 16 bit access
-                WRITE_PERIPHERAL_REGISTER_16(*(UINT16 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
-                info->txbuf_ptr += 2;
-                info->stats.txBytes += 2;
-                fifo_space --;
-/* added by bingtao */
-               fill -=2;
-       }
-        if ((fifo_space > 0) & (fill > 0)) {
-                // trailing 8 bit access
-                WRITE_PERIPHERAL_REGISTER_8(*(UINT8 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
-                info->txbuf_ptr ++;
-                info->stats.txBytes ++;
-/*
-                fifo_space --;
-*/
-       }
-
-        // check if transmission complete
-        if (info->txbuf_ptr >= info->txbuf_end) {
-                ifx_int_wrapper.disable(info->txirq);
-                kfree(info->txbuf);
-                info->txbuf = NULL;
-                /* wake up any process waiting in poll() */
-                //wake_up_interruptible(&info->pwait);
-        }      
-
-} // tx_int
-
-static void
-ifx_ssc_rx_int(int irq, void *dev_id, struct pt_regs *regs)
-{
-       struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
-       //WRITE_PERIPHERAL_REGISTER(IFX_SSC_R_BIT, info->mapbase + IFX_SSC_IRN_CR);
-        rx_int(info);
-}
-
-static void
-ifx_ssc_tx_int(int irq, void *dev_id, struct pt_regs *regs)
-{
-       struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
-       //WRITE_PERIPHERAL_REGISTER(IFX_SSC_T_BIT, info->mapbase + IFX_SSC_IRN_CR);
-        tx_int(info);
-}
-
-static void
-ifx_ssc_err_int(int irq, void *dev_id, struct pt_regs *regs)
-{
-       struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
-       unsigned int state;
-       unsigned int write_back = 0;
-       unsigned long flags;
-
-
-       local_irq_save(flags);
-       state = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE); 
-
-       if ((state & IFX_SSC_STATE_RX_UFL) != 0) {
-               info->stats.rxUnErr++;
-               write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR;
-       }
-       if ((state & IFX_SSC_STATE_RX_OFL) != 0) {
-               info->stats.rxOvErr++;
-               write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR;
-       }
-       if ((state & IFX_SSC_STATE_TX_OFL) != 0) {
-               info->stats.txOvErr++;
-               write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR;
-       }
-       if ((state & IFX_SSC_STATE_TX_UFL) != 0) {
-               info->stats.txUnErr++;
-               write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR;
-       }
-//     if ((state & IFX_SSC_STATE_ABORT_ERR) != 0) {
-//             info->stats.abortErr++;
-//             write_back |= IFX_SSC_WHBSTATE_CLR_ABORT_ERROR;
-//     }
-       if ((state & IFX_SSC_STATE_MODE_ERR) != 0) {
-               info->stats.modeErr++;
-               write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR;
-       }
-
-       if (write_back)
-               WRITE_PERIPHERAL_REGISTER(write_back, 
-                                         info->mapbase + IFX_SSC_WHBSTATE);
-
-       local_irq_restore(flags);
-}
-
-#ifdef SSC_FRAME_INT_ENABLE
-static void
-ifx_ssc_frm_int(int irq, void *dev_id, struct pt_regs *regs)
-{
-       // ### TO DO: wake up framing wait-queue in conjunction with batch execution
-}
-#endif
-
-static void
-ifx_ssc_abort(struct ifx_ssc_port *info)
-{
-       unsigned long flags;
-       bool enabled;
-
-        local_irq_save(flags);
-
-       // disable all int's
-       ifx_int_wrapper.disable(info->rxirq);
-       ifx_int_wrapper.disable(info->txirq);
-       ifx_int_wrapper.disable(info->errirq);
-/*
-       ifx_int_wrapper.disable(info->frmirq);
-*/
-        local_irq_restore(flags);
-
-       // disable SSC (also aborts a receive request!)
-       // ### TO DO: Perhaps it's better to abort after the receiption of a 
-       // complete word. The disable cuts the transmission immediatly and 
-       // releases the chip selects. This could result in unpredictable 
-       // behavior of connected external devices!
-       enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) 
-                  & IFX_SSC_STATE_IS_ENABLED) != 0;
-       WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, 
-                                 info->mapbase + IFX_SSC_WHBSTATE);
-
-
-       // flush fifos
-        WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH, 
-                                  info->mapbase + IFX_SSC_TXFCON);
-        WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH, 
-                                  info->mapbase + IFX_SSC_RXFCON);
-
-       // free txbuf
-       if (info->txbuf != NULL) {
-               kfree(info->txbuf);
-               info->txbuf = NULL;
-       }
-
-       // wakeup read process
-       if (info->rxbuf != NULL)
-               wake_up_interruptible(&info->rwait);
-
-       // clear pending int's 
-       ifx_int_wrapper.clear(info->rxirq);
-       ifx_int_wrapper.clear(info->txirq);
-       ifx_int_wrapper.clear(info->errirq);
-/*
-       ifx_int_wrapper.clear(info->frmirq);
-*/
-
-       // clear error flags
-       WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR,
-                                 info->mapbase + IFX_SSC_WHBSTATE);
-
-       //printk("IFX SSC%d: Transmission aborted\n", info->port_nr);
-       // enable SSC
-       if (enabled)
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, 
-                                         info->mapbase + IFX_SSC_WHBSTATE);
-
-} // ifx_ssc_abort
-
-
-/*
- * This routine is called whenever a port is opened.  It enforces
- * exclusive opening of a port and enables interrupts, etc.
- */
-int
-ifx_ssc_open(struct inode *inode, struct file * filp)
-{
-       struct ifx_ssc_port  *info;
-       int line;
-       int from_kernel = 0;
-
-       if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) {
-               from_kernel = 1;
-               line = (int)inode;
-       }
-       else {
-               line = MINOR(filp->f_dentry->d_inode->i_rdev);
-               filp->f_op = &ifx_ssc_fops;
-       }
-
-       /* don't open more minor devices than we can support */
-       if (line < 0 || line >= PORT_CNT)
-               return -ENXIO;
-
-       info = &isp[line];
-
-       /* exclusive open */
-       if (info->port_is_open != 0)
-               return -EBUSY;
-       info->port_is_open++;
-
-       ifx_int_wrapper.disable(info->rxirq);
-       ifx_int_wrapper.disable(info->txirq);
-       ifx_int_wrapper.disable(info->errirq);
-/*
-       ifx_int_wrapper.disable(info->frmirq);
-*/
-
-       /* Flush and enable TX/RX FIFO */
-       WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL << 
-                                   IFX_SSC_XFCON_ITL_OFFSET) | 
-                                 IFX_SSC_XFCON_FIFO_FLUSH   |
-                                  IFX_SSC_XFCON_FIFO_ENABLE, 
-                                  info->mapbase + IFX_SSC_TXFCON);
-        WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL << 
-                                   IFX_SSC_XFCON_ITL_OFFSET) |
-                                 IFX_SSC_XFCON_FIFO_FLUSH   | 
-                                  IFX_SSC_XFCON_FIFO_ENABLE, 
-                                  info->mapbase + IFX_SSC_RXFCON);
-
-
-       /* logically flush the software FIFOs */
-       info->rxbuf_ptr = 0;
-       info->txbuf_ptr = 0;
-
-       /* clear all error bits */
-       WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR,
-                                 info->mapbase + IFX_SSC_WHBSTATE);
-
-       // clear pending interrupts
-       ifx_int_wrapper.clear(info->rxirq);
-       ifx_int_wrapper.clear(info->txirq);
-       ifx_int_wrapper.clear(info->errirq);
-/*
-       ifx_int_wrapper.clear(info->frmirq);
-*/
-
-       // enable SSC
-       WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, 
-                                 info->mapbase + IFX_SSC_WHBSTATE);
-
-       MOD_INC_USE_COUNT;
-
-       return 0;
-} /* ifx_ssc_open */
-EXPORT_SYMBOL(ifx_ssc_open);
-
-/*
- * This routine is called when a particular device is closed.
- */
-int
-ifx_ssc_close(struct inode *inode, struct file *filp)
-{
-       struct ifx_ssc_port *info;
-        int idx;
-
-       if ((inode == (struct inode *)0) || (inode == (struct inode *)1))
-               idx = (int)inode;
-       else
-               idx = MINOR(filp->f_dentry->d_inode->i_rdev);
-
-       if (idx < 0 || idx >= PORT_CNT)
-               return -ENXIO;
-
-       info = &isp[idx];
-        if (!info)
-                return -ENXIO;
-
-       // disable SSC
-       WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, 
-                                 info->mapbase + IFX_SSC_WHBSTATE);
-
-       // call abort function to disable int's, flush fifos...
-       ifx_ssc_abort(info);
-
-       info->port_is_open --;
-       MOD_DEC_USE_COUNT;
-
-       return 0;
-} /* ifx_ssc_close */
-EXPORT_SYMBOL(ifx_ssc_close);
-
-/* added by bingtao */
-/* helper routine to handle reads from the kernel or user-space */
-/* info->rxbuf : never kfree and contains valid data */
-/* should be points to NULL after copying data !!! */
-static ssize_t
-ifx_ssc_read_helper_poll(struct ifx_ssc_port *info, char *buf, size_t len,
-                    int from_kernel)
-{
-        ssize_t         ret_val;
-       unsigned long   flags;
-
-        if (info->opts.modeRxTx == IFX_SSC_MODE_TX) 
-                return -EFAULT;
-        local_irq_save(flags);
-        info->rxbuf_ptr = info->rxbuf;
-        info->rxbuf_end = info->rxbuf + len;
-        local_irq_restore(flags);
-/* Vinetic driver always works in IFX_SSC_MODE_RXTX */ 
-/* TXRX in poll mode */
-       while (info->rxbuf_ptr < info->rxbuf_end){
-/* This is the key point, if you don't check this condition 
-   kfree (NULL) will happen 
-   because tx only need write into FIFO, it's much fast than rx
-   So when rx still waiting , tx already finish and release buf        
-*/     
-               if (info->txbuf_ptr < info->txbuf_end) {
-                       tx_int(info);
-               }
-               
-               rx_int(info);
-        };
-
-        ret_val = info->rxbuf_ptr - info->rxbuf; 
-       return (ret_val);
-} // ifx_ssc_read_helper_poll
-
-/* helper routine to handle reads from the kernel or user-space */
-/* info->rx_buf : never kfree and contains valid data */
-/* should be points to NULL after copying data !!! */
-static ssize_t
-ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len,
-                    int from_kernel)
-{
-        ssize_t         ret_val;
-       unsigned long   flags;
-        DECLARE_WAITQUEUE(wait, current);
-
-        if (info->opts.modeRxTx == IFX_SSC_MODE_TX) 
-                return -EFAULT;
-        local_irq_save(flags);
-        info->rxbuf_ptr = info->rxbuf;
-        info->rxbuf_end = info->rxbuf + len;
-        if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
-                if ((info->txbuf == NULL) ||
-                    (info->txbuf != info->txbuf_ptr) ||
-                    (info->txbuf_end != len + info->txbuf)) {
-                        local_irq_restore(flags);
-                        printk("IFX SSC - %s: write must be called before calling "
-                               "read in combined RX/TX!\n", __FUNCTION__);
-                        return -EFAULT;
-                }
-               local_irq_restore(flags);
-               /* should enable tx, right?*/
-               tx_int(info);
-               if (info->txbuf_ptr < info->txbuf_end){
-                       ifx_int_wrapper.enable(info->txirq);
-               }
-                
-               ifx_int_wrapper.enable(info->rxirq);
-        } else { // rx mode
-               local_irq_restore(flags);
-                if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) &
-                    IFX_SSC_RXCNT_TODO_MASK)
-                        return -EBUSY;
-               ifx_int_wrapper.enable(info->rxirq);
-               // rx request limited to ' bytes
-/*
-                if (len < 65536)
-*/
-                if (len < IFX_SSC_RXREQ_BLOCK_SIZE)
-                        WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, 
-                                                  info->mapbase + IFX_SSC_RXREQ);
-                else 
-                       WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, 
-                                                  info->mapbase + IFX_SSC_RXREQ);
-        }
-
-        __add_wait_queue(&info->rwait, &wait);
-        set_current_state(TASK_INTERRUPTIBLE);
-        // wakeup done in rx_int
-        do {
-               local_irq_save(flags);
-                if (info->rxbuf_ptr >= info->rxbuf_end)
-                        break;
-               local_irq_restore(flags);
-
-//                if (filp->f_flags & O_NONBLOCK)
-//                {
-//                        N = -EAGAIN;
-//                        goto out;
-//                }
-                if (signal_pending(current)) {
-                        ret_val = -ERESTARTSYS;
-                        goto out;
-                }
-                schedule();
-        } while (1);
-
-        ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len
-       local_irq_restore(flags);
-
-  out:
-        current->state = TASK_RUNNING;
-        __remove_wait_queue(&info->rwait, &wait);
-       return (ret_val);
-} // ifx_ssc_read_helper
-
-
-#if 0
-/* helper routine to handle reads from the kernel or user-space */
-/* appropriate in interrupt context */
-static ssize_t
-ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len,
-                    int from_kernel)
-{
-        ssize_t         ret_val;
-       unsigned long   flags;
-               DECLARE_WAITQUEUE(wait, current);
-       
-        if (info->opts.modeRxTx == IFX_SSC_MODE_TX) 
-                return -EFAULT;
-        local_irq_save(flags);
-        info->rxbuf_ptr = info->rxbuf;
-        info->rxbuf_end = info->rxbuf + len;
-        if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
-                if ((info->txbuf == NULL) ||
-                    (info->txbuf != info->txbuf_ptr) ||
-                    (info->txbuf_end != len + info->txbuf)) {
-                        local_irq_restore(flags);
-                        printk("IFX SSC - %s: write must be called before calling "
-                               "read in combined RX/TX!\n", __FUNCTION__);
-                        return -EFAULT;
-                }
-               local_irq_restore(flags);
-               /* should enable tx, right?*/
-               tx_int(info);
-               if (!in_irq()){
-                       if (info->txbuf_ptr < info->txbuf_end){
-                               ifx_int_wrapper.enable(info->txirq);
-                       }
-                       ifx_int_wrapper.enable(info->rxirq);
-               }
-        } else { // rx mode
-               local_irq_restore(flags);
-                if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) &
-                    IFX_SSC_RXCNT_TODO_MASK)
-                        return -EBUSY;
-               if (!in_irq()){
-                       ifx_int_wrapper.enable(info->rxirq);
-               }
-
-                if (len < IFX_SSC_RXREQ_BLOCK_SIZE)
-                        WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, 
-                                                  info->mapbase + IFX_SSC_RXREQ);
-                else 
-                       WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, 
-                                                  info->mapbase + IFX_SSC_RXREQ);
-        }
-       if (in_irq()){
-               do {
-                       rx_int(info);
-                       if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
-                               tx_int(info);
-                       }
-                       
-                       if (info->rxbuf_ptr >= info->rxbuf_end)
-                               break;
-               } while (1);
-               ret_val = info->rxbuf_ptr - info->rxbuf;
-       }else{
-               __add_wait_queue(&info->rwait, &wait);
-               set_current_state(TASK_INTERRUPTIBLE);
-               // wakeup done in rx_int
-       
-               do {
-                       local_irq_save(flags);
-                       if (info->rxbuf_ptr >= info->rxbuf_end)
-                               break;
-                       local_irq_restore(flags);
-
-                       if (signal_pending(current)) {
-                               ret_val = -ERESTARTSYS;
-                               goto out;
-                       }
-                       schedule();
-               } while (1);
-
-               ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len
-               local_irq_restore(flags);
-
-  out:
-               current->state = TASK_RUNNING;
-               __remove_wait_queue(&info->rwait, &wait);
-       }
-       return (ret_val);
-} // ifx_ssc_read_helper
-#endif
-
-/* helper routine to handle writes to the kernel or user-space */
-/* info->txbuf has two cases:
- *     1) return value < 0 (-EFAULT), not touched at all
- *     2) kfree and points to NULL in interrupt routine (but maybe later )
- */
-static ssize_t
-ifx_ssc_write_helper(struct ifx_ssc_port *info, const char *buf,
-               size_t len, int from_kernel)
-{
-        // check if in tx or tx/rx mode
-        if (info->opts.modeRxTx == IFX_SSC_MODE_RX)
-                return -EFAULT;
-
-        info->txbuf_ptr = info->txbuf;
-        info->txbuf_end = len + info->txbuf;
-       /* start the transmission (not in rx/tx, see read helper) */
-        if (info->opts.modeRxTx == IFX_SSC_MODE_TX) {
-               tx_int(info);
-               if (info->txbuf_ptr < info->txbuf_end){
-                       ifx_int_wrapper.enable(info->txirq);
-               }
-        }
-       //local_irq_restore(flags);
-        return len;
-}
-
-/*
- * kernel interfaces for read and write.
- * The caller must set port to: n for SSC<m> with n=m-1 (e.g. n=0 for SSC1)
- */
-ssize_t
-ifx_ssc_kread(int port, char *kbuf, size_t len)
-{
-       struct ifx_ssc_port *info;
-        ssize_t ret_val;
-
-       if (port < 0 || port >= PORT_CNT)
-               return -ENXIO;
-
-        if (len == 0)
-                return 0;
-
-       info = &isp[port];
-
-        // check if reception in progress
-        if (info->rxbuf != NULL){
-               printk("SSC device busy\n");
-                return -EBUSY;
-       }
-
-       info->rxbuf = kbuf;
-        if (info->rxbuf == NULL){
-               printk("SSC device error\n");
-                return -EINVAL;
-       }
-
-/* changed by bingtao */
-       /* change by TaiCheng */
-       //if (!in_irq()){
-       if (0){
-               ret_val = ifx_ssc_read_helper(info, kbuf, len, 1);
-       }else{
-               ret_val = ifx_ssc_read_helper_poll(info, kbuf, len, 1);
-       };              
-       info->rxbuf = NULL;
-
-        // ### TO DO: perhaps warn if ret_val != len
-       ifx_int_wrapper.disable(info->rxirq);
-
-        return (ret_val);
-} // ifx_ssc_kread
-EXPORT_SYMBOL(ifx_ssc_kread);
-
-ssize_t
-ifx_ssc_kwrite(int port, const char *kbuf, size_t len)
-{
-       struct ifx_ssc_port *info;
-       ssize_t ret_val;
-
-       if (port < 0 || port >= PORT_CNT)
-               return -ENXIO;
-
-        if (len == 0)
-                return 0;
-
-       info = &isp[port];
-
-        // check if transmission in progress
-        if (info->txbuf != NULL)
-                return -EBUSY;
-        info->txbuf = (char *)kbuf;
-
-       ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 1);
-       if (ret_val < 0){
-               info->txbuf = NULL;
-       }
-       return ret_val;
-}
-EXPORT_SYMBOL(ifx_ssc_kwrite);
-
-
-/* 
- * user interfaces to read and write
- */
-static ssize_t
-ifx_ssc_read(struct file *filp, char *ubuf, size_t len, loff_t *off)
-{
-        ssize_t ret_val;
-        int idx;
-       struct ifx_ssc_port *info;
-
-/*
-        if (len == 0)
-                return (0);
-*/
-        idx = MINOR(filp->f_dentry->d_inode->i_rdev);
-       info = &isp[idx];
-
-        // check if reception in progress
-        if (info->rxbuf != NULL)
-                return -EBUSY;
-
-       info->rxbuf = kmalloc(len+ 3, GFP_KERNEL);
-        if (info->rxbuf == NULL)
-                return -ENOMEM;
-
-       ret_val = ifx_ssc_read_helper(info, info->rxbuf, len, 0);
-       // ### TO DO: perhaps warn if ret_val != len
-        if (copy_to_user((void*)ubuf, info->rxbuf, ret_val) != 0)
-                ret_val = -EFAULT;
-
-       ifx_int_wrapper.disable(info->rxirq);
-
-        kfree(info->rxbuf);
-       info->rxbuf = NULL;
-        return (ret_val);
-} // ifx_ssc_read
-
-/*
- * As many bytes as we have free space for are copied from the user
- * into txbuf and the actual byte count is returned. The transmission is
- * always kicked off by calling the appropriate TX routine.
- */
-static ssize_t
-ifx_ssc_write(struct file *filp, const char *ubuf, size_t len, loff_t *off)
-{
-        int idx;
-       struct ifx_ssc_port *info;
-       int ret_val;
-
-        if (len == 0)
-                return (0);
-
-        idx = MINOR(filp->f_dentry->d_inode->i_rdev);
-       info = &isp[idx];
-
-        // check if transmission in progress
-        if (info->txbuf != NULL)
-                return -EBUSY;
-
-       info->txbuf = kmalloc(len+ 3, GFP_KERNEL);
-        if (info->txbuf == NULL)
-                return -ENOMEM;
-
-       ret_val = copy_from_user(info->txbuf, ubuf, len);
-       if (ret_val == 0)
-               ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 0);
-       else
-               ret_val = -EFAULT;
-       if (ret_val < 0) {
-                kfree(info->txbuf); // otherwise will be done in ISR
-               info->txbuf = NULL;
-       }
-       return (ret_val);
-} /* ifx_ssc_write */
-
-
-/*
- * ------------------------------------------------------------
- * ifx_ssc_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME  : ifx_ssc_frm_status_get
- LONG-NAME  : framing status get
- PURPOSE    : Get the actual status of the framing.
-
- PARAMETER  : *info    pointer to the port-specific structure ifx_ssc_port.
-
- RESULT     : pointer to a structure ifx_ssc_frm_status which holds busy and 
-             count values.
-
- REMARKS    : Returns a register value independent of framing is enabled or 
-             not! Changes structure inside of info, so the return value isn't 
-             needed at all, but could be used for simple access.
------------------------------------------------------------------------------*/
-static struct ifx_ssc_frm_status *
-ifx_ssc_frm_status_get(struct ifx_ssc_port *info)
-{
-       unsigned long tmp;
-       
-       tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFSTAT);
-       info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0;
-       info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0;
-       info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK) 
-               >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET;
-       info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) 
-               >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET;
-       tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON);
-       info->frm_status.EnIntAfterData = 
-               (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0;
-       info->frm_status.EnIntAfterPause = 
-               (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0;
-       return (&info->frm_status);
-} // ifx_ssc_frm_status_get
-
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME  : ifx_ssc_frm_control_get
- LONG-NAME  : framing control get
- PURPOSE    : Get the actual control values of the framing.
-
- PARAMETER  : *info    pointer to the port-specific structure ifx_ssc_port.
-
- RESULT     : pointer to a structure ifx_ssc_frm_opts which holds control bits  
-             and count reload values.
-
- REMARKS    : Changes structure inside of info, so the return value isn't 
-             needed at all, but could be used for simple access.
------------------------------------------------------------------------------*/
-static struct ifx_ssc_frm_opts *
-ifx_ssc_frm_control_get(struct ifx_ssc_port *info)
-{
-       unsigned long tmp;
-       
-       tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON);
-       info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0;
-       info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK) 
-               >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
-       info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) 
-               >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
-       info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK) 
-               >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
-       info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK) 
-               >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
-       info->frm_opts.StopAfterPause = 
-               (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0;
-       return (&info->frm_opts);
-} // ifx_ssc_frm_control_get
-
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME  : ifx_ssc_frm_control_set
- LONG-NAME  : framing control set
- PURPOSE    : Set the actual control values of the framing.
-
- PARAMETER  : *info    pointer to the port-specific structure ifx_ssc_port.
-
- RESULT     : pointer to a structure ifx_ssc_frm_opts which holds control bits  
-             and count reload values.
-
- REMARKS    : 
------------------------------------------------------------------------------*/
-static int
-ifx_ssc_frm_control_set(struct ifx_ssc_port *info)
-{
-       unsigned long tmp;
-
-       // check parameters
-       if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX) || 
-           (info->frm_opts.DataLength < 1) ||
-           (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX) || 
-           (info->frm_opts.PauseLength < 1) ||
-           ((info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >> 
-                                         IFX_SSC_SFCON_PAUSE_DATA_OFFSET)) != 0 ) || 
-           ((info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >> 
-                                          IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)) != 0 ))
-               return -EINVAL;
-
-       // read interrupt bits (they're not changed here)
-       tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON) &
-               (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE | 
-                IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE);
-
-       // set all values with respect to it's bit position (for data and pause 
-       // length set N-1)
-       tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
-       tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
-       tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
-       tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
-       tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE;
-       tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE;
-
-       WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON);
-
-       return 0;
-} // ifx_ssc_frm_control_set
-
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME  : ifx_ssc_rxtx_mode_set
- LONG-NAME  : rxtx mode set
- PURPOSE    : Set the transmission mode.
-
- PARAMETER  : *info    pointer to the port-specific structure ifx_ssc_port.
-
- RESULT     : Returns error code
-
- REMARKS    : Assumes that SSC not used (SSC disabled, device not opened yet 
-             or just closed) 
------------------------------------------------------------------------------*/
-static int
-ifx_ssc_rxtx_mode_set(struct ifx_ssc_port *info, unsigned int val)
-{
-       unsigned long tmp;
-
-       // check parameters
-       if (!(info) || (val & ~(IFX_SSC_MODE_MASK)))
-               return -EINVAL;
-       /*check BUSY and RXCNT*/        
-       if (  READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY
-           ||READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK)
-               return -EBUSY;
-       // modify 
-       tmp = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) &
-               ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val);
-       WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_CON);
-       info->opts.modeRxTx = val;
-/*     
-       printk(KERN_DEBUG "IFX SSC%d: Setting mode to %s%s\n", 
-              info->port_nr,
-              ((val & IFX_SSC_CON_RX_OFF) == 0) ? "rx ":"", 
-              ((val & IFX_SSC_CON_TX_OFF) == 0) ? "tx":"");
-*/
-       return 0;
-} // ifx_ssc_rxtx_mode_set
-
-void ifx_gpio_init(void) 
-{
-       u32     temp;
-/* set gpio pin p0.10(SPI_DIN) p0.11(SPI_DOUT) p0.12(SPI_CLK) p0.13(SPI_CS2) direction */
-       temp = *(AMAZON_GPIO_P0_DIR) ;
-       temp &= 0xFFFFFBFF;
-       temp |= 0x3800;
-       *(AMAZON_GPIO_P0_DIR) = temp;
-/* set port 0 alternate select register 0 */
-       temp = *(AMAZON_GPIO_P0_ALTSEL0) ;
-       temp &= 0xFFFFC3FF;
-       temp |= 0x00001c00;
-       *(AMAZON_GPIO_P0_ALTSEL0) = temp;
-
-/* set port 0 alternate select register 1 */
-       temp = *(AMAZON_GPIO_P0_ALTSEL1) ;
-       temp &= 0xFFFFC3FF;
-       temp |= 0x00002000;
-       *(AMAZON_GPIO_P0_ALTSEL1) = temp;
-
-/* set port 0 open drain mode register */
-       temp = *(AMAZON_GPIO_P0_OD);
-       temp |= 0x00003800;     /* set output pin normal mode */
-       *(AMAZON_GPIO_P0_OD)= temp;
-}
-
-/*
- * This routine intializes the SSC appropriately depending
- * on slave/master and full-/half-duplex mode.
- * It assumes that the SSC is disabled and the fifo's and buffers 
- * are flushes later on.
- */
-static int
-ifx_ssc_sethwopts(struct ifx_ssc_port *info)
-{
-       unsigned long flags, bits;
-       struct ifx_ssc_hwopts *opts = &info->opts;
-
-       /* sanity checks */
-       if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH) ||
-           (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH)) {
-               printk("%s: sanity check failed\n", __FUNCTION__);
-               return -EINVAL;
-       }
-        bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET;
-       bits |= IFX_SSC_CON_ENABLE_BYTE_VALID;
-//     if (opts->abortErrDetect)
-//             bits |= IFX_SSC_CON_ABORT_ERR_CHECK;
-       if (opts->rxOvErrDetect)
-               bits |= IFX_SSC_CON_RX_OFL_CHECK;
-       if (opts->rxUndErrDetect)
-               bits |= IFX_SSC_CON_RX_UFL_CHECK;
-       if (opts->txOvErrDetect)
-               bits |= IFX_SSC_CON_TX_OFL_CHECK;
-       if (opts->txUndErrDetect)
-               bits |= IFX_SSC_CON_TX_UFL_CHECK;
-       if (opts->loopBack)
-               bits |= IFX_SSC_CON_LOOPBACK_MODE;
-       if (opts->echoMode)
-               bits |= IFX_SSC_CON_ECHO_MODE_ON;
-       if (opts->headingControl)
-               bits |= IFX_SSC_CON_MSB_FIRST;
-       if (opts->clockPhase)
-               bits |= IFX_SSC_CON_LATCH_THEN_SHIFT;
-       if (opts->clockPolarity)
-               bits |= IFX_SSC_CON_CLOCK_FALL;
-       switch (opts->modeRxTx) {
-       case IFX_SSC_MODE_TX:
-               bits |= IFX_SSC_CON_RX_OFF;
-               break;
-       case IFX_SSC_MODE_RX:
-               bits |= IFX_SSC_CON_TX_OFF;
-               break;
-       } // switch (opts->modeRxT)
-       local_irq_save(flags);
-        WRITE_PERIPHERAL_REGISTER(bits, info->mapbase + IFX_SSC_CON);
-        WRITE_PERIPHERAL_REGISTER((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) | 
-                                 (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS), 
-                                 info->mapbase + IFX_SSC_GPOCON);
-       //master mode
-       if (opts->masterSelect){
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE);
-       }else{
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE);
-       }
-       // init serial framing
-        WRITE_PERIPHERAL_REGISTER(0, info->mapbase + IFX_SSC_SFCON);
-       /* set up the port pins */
-        //check for general requirements to switch (external) pad/pin characteristics
-       ifx_gpio_init();
-       local_irq_restore(flags);
-
-       return 0;
-} // ifx_ssc_sethwopts
-
-static int
-ifx_ssc_set_baud(struct ifx_ssc_port *info, unsigned int baud)
-{
-       unsigned int ifx_ssc_clock;
-       unsigned int br;
-       unsigned long flags;
-       bool enabled;
-
-       ifx_ssc_clock = ifx_ssc_get_kernel_clk(info);
-       if (ifx_ssc_clock ==0)
-               return -EINVAL;
-
-       local_irq_save(flags);
-       /* have to disable the SSC to set the baudrate */
-       enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) 
-                  & IFX_SSC_STATE_IS_ENABLED) != 0;
-       WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, 
-                                 info->mapbase + IFX_SSC_WHBSTATE);
-
-       // compute divider
-       br = ((ifx_ssc_clock >> 1)/baud) - 1;
-       asm("SYNC"); 
-       if (br > 0xffff || 
-           ((br == 0) && 
-            ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & 
-              IFX_SSC_STATE_IS_MASTER) == 0))){
-               local_irq_restore(flags);
-               printk("%s: illegal baudrate %u\n", __FUNCTION__, baud);
-               return -EINVAL;
-       }
-       WRITE_PERIPHERAL_REGISTER(br, info->mapbase + IFX_SSC_BR);
-       if (enabled)
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, 
-                                         info->mapbase + IFX_SSC_WHBSTATE);
-
-       local_irq_restore(flags);
-       return 0;
-} // ifx_ssc_set_baud
-
-static int
-ifx_ssc_hwinit(struct ifx_ssc_port *info)
-{
-       unsigned long flags;
-       bool enabled;
-
-       /* have to disable the SSC */
-       enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) 
-                  & IFX_SSC_STATE_IS_ENABLED) != 0;
-       WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, 
-                                 info->mapbase + IFX_SSC_WHBSTATE);
-
-       if (ifx_ssc_sethwopts(info) < 0)
-       {
-               printk("%s: setting the hardware options failed\n",
-                       __FUNCTION__);
-               return -EINVAL;
-       }
-
-       if (ifx_ssc_set_baud(info, info->baud) < 0) {
-               printk("%s: setting the baud rate failed\n", __FUNCTION__);
-               return -EINVAL;
-       }
-        local_irq_save(flags);
-        /* TX FIFO */
-        WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL << 
-                                   IFX_SSC_XFCON_ITL_OFFSET) | 
-                                  IFX_SSC_XFCON_FIFO_ENABLE, 
-                                  info->mapbase + IFX_SSC_TXFCON);
-        /* RX FIFO */
-        WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL << 
-                                   IFX_SSC_XFCON_ITL_OFFSET) | 
-                                  IFX_SSC_XFCON_FIFO_ENABLE, 
-                                  info->mapbase + IFX_SSC_RXFCON);
-        local_irq_restore(flags);
-       if (enabled)
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, 
-                                         info->mapbase + IFX_SSC_WHBSTATE);
-       return 0;
-} // ifx_ssc_hwinit
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME  : ifx_ssc_batch_exec
- LONG-NAME  : 
- PURPOSE    : 
-
- PARAMETER  : *info    pointer to the port-specific structure ifx_ssc_port.
-
- RESULT     : Returns error code
-
- REMARKS    : 
------------------------------------------------------------------------------*/
-static int
-ifx_ssc_batch_exec(struct ifx_ssc_port *info, struct ifx_ssc_batch_list *batch_anchor)
-{
-       // ### TO DO: implement user space batch execution
-       // first, copy the whole linked list from user to kernel space
-       // save some hardware options
-       // execute list
-       // restore hardware options if selected
-       return -EFAULT;
-} // ifx_ssc_batch_exec
-
-
-/*
- * This routine allows the driver to implement device-
- * specific ioctl's.  If the ioctl number passed in cmd is
- * not recognized by the driver, it should return ENOIOCTLCMD.
- */
-int
-ifx_ssc_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-              unsigned long data)
-{
-       struct ifx_ssc_port *info;
-       int line, ret_val = 0;
-       unsigned long flags;
-       unsigned long tmp;
-       int from_kernel = 0;
-
-       if ((inode == (struct inode *)0) || (inode == (struct inode *)1))
-       {
-               from_kernel = 1;
-               line = (int)inode;
-       }
-       else
-               line = MINOR(filp->f_dentry->d_inode->i_rdev);
-
-       /* don't use more minor devices than we can support */
-       if (line < 0 || line >= PORT_CNT)
-               return -ENXIO;
-
-       info = &isp[line];
-
-       switch (cmd) {
-       case IFX_SSC_STATS_READ:
-               /* data must be a pointer to a struct ifx_ssc_statistics */
-               if (from_kernel)
-                       memcpy((void *)data, (void *)&info->stats,
-                              sizeof(struct ifx_ssc_statistics));
-               else
-                       if (copy_to_user((void *)data,
-                                        (void *)&info->stats,
-                                        sizeof(struct ifx_ssc_statistics)))
-                               ret_val = -EFAULT;
-               break;
-       case IFX_SSC_STATS_RESET:
-               /* just resets the statistics counters */
-               memset((void *)&info->stats, 0, sizeof(struct ifx_ssc_statistics));
-               break;
-        case IFX_SSC_BAUD_SET:
-                /* if the buffers are not empty then the port is */
-                /* busy and we shouldn't change things on-the-fly! */
-                if (!info->txbuf || !info->rxbuf || 
-                   (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) 
-                    & IFX_SSC_STATE_BUSY)) {
-                        ret_val = -EBUSY;
-                        break;
-                }
-                /* misuse flags */
-                if (from_kernel)
-                        flags = *((unsigned long *)data);
-                else
-                        if (copy_from_user((void *)&flags,
-                                           (void *)data, sizeof(flags)))
-                        {
-                                ret_val = -EFAULT;
-                                break;
-                        }
-                if (flags == 0)
-                {
-                        ret_val = -EINVAL;
-                        break;
-                }
-                if (ifx_ssc_set_baud(info, flags) < 0)
-                {
-                        ret_val = -EINVAL;
-                        break;
-                }
-                info->baud = flags;
-                break;
-        case IFX_SSC_BAUD_GET:
-                if (from_kernel)
-                        *((unsigned int *)data) = info->baud;
-                else
-                        if (copy_to_user((void *)data,
-                                         (void *)&info->baud,
-                                         sizeof(unsigned long)))
-                                ret_val = -EFAULT;
-                break;
-       case IFX_SSC_RXTX_MODE_SET:
-                if (from_kernel)
-                        tmp = *((unsigned long *)data);
-                else
-                        if (copy_from_user((void *)&tmp,
-                                           (void *)data, sizeof(tmp))) {
-                                ret_val = -EFAULT;
-                                break;
-                        }
-               ret_val = ifx_ssc_rxtx_mode_set(info, tmp);
-               break;
-       case IFX_SSC_RXTX_MODE_GET:
-               tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) &
-                       (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF));
-                if (from_kernel)
-                        *((unsigned int *)data) = tmp;
-                else
-                        if (copy_to_user((void *)data,
-                                         (void *)&tmp,
-                                         sizeof(tmp)))
-                                ret_val = -EFAULT;
-               break;
-
-       case IFX_SSC_ABORT:
-               ifx_ssc_abort(info);
-               break;
-
-       case IFX_SSC_GPO_OUT_SET:
-                if (from_kernel)
-                        tmp = *((unsigned long *)data);
-                else
-                        if (copy_from_user((void *)&tmp,
-                                           (void *)data, sizeof(tmp))) {
-                                ret_val = -EFAULT;
-                                break;
-                        }
-               if (tmp > IFX_SSC_MAX_GPO_OUT)
-                       ret_val = -EINVAL;
-               else
-                       WRITE_PERIPHERAL_REGISTER
-                               (1<<(tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS), 
-                                info->mapbase + IFX_SSC_WHBGPOSTAT);
-               break;
-       case IFX_SSC_GPO_OUT_CLR:
-                if (from_kernel)
-                        tmp = *((unsigned long *)data);
-                else
-                        if (copy_from_user((void *)&tmp,
-                                           (void *)data, sizeof(tmp))) {
-                                ret_val = -EFAULT;
-                                break;
-                        }
-               if (tmp > IFX_SSC_MAX_GPO_OUT)
-                       ret_val = -EINVAL;
-               else {
-                       WRITE_PERIPHERAL_REGISTER
-                               (1<<(tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS), 
-                                info->mapbase + IFX_SSC_WHBGPOSTAT);
-               }
-               break;
-       case IFX_SSC_GPO_OUT_GET:
-               tmp = READ_PERIPHERAL_REGISTER
-                       (info->mapbase + IFX_SSC_GPOSTAT);
-                if (from_kernel)
-                        *((unsigned int *)data) = tmp;
-                else
-                        if (copy_to_user((void *)data,
-                                         (void *)&tmp,
-                                         sizeof(tmp)))
-                                ret_val = -EFAULT;
-               break;
-       case IFX_SSC_FRM_STATUS_GET:
-               ifx_ssc_frm_status_get(info);
-               if (from_kernel)
-                       memcpy((void *)data, (void *)&info->frm_status,
-                              sizeof(struct ifx_ssc_frm_status));
-               else
-                       if (copy_to_user((void *)data,
-                                        (void *)&info->frm_status,
-                                        sizeof(struct ifx_ssc_frm_status)))
-                               ret_val = -EFAULT;
-               break;
-       case IFX_SSC_FRM_CONTROL_GET:
-               ifx_ssc_frm_control_get(info);
-               if (from_kernel)
-                       memcpy((void *)data, (void *)&info->frm_opts,
-                              sizeof(struct ifx_ssc_frm_opts));
-               else
-                       if (copy_to_user((void *)data,
-                                        (void *)&info->frm_opts,
-                                        sizeof(struct ifx_ssc_frm_opts)))
-                               ret_val = -EFAULT;
-               break;
-       case IFX_SSC_FRM_CONTROL_SET:
-               if (from_kernel)
-                       memcpy((void *)&info->frm_opts, (void *)data, 
-                              sizeof(struct ifx_ssc_frm_opts));
-               else
-                       if (copy_to_user((void *)&info->frm_opts,
-                                        (void *)data,
-                                        sizeof(struct ifx_ssc_frm_opts))){
-                               ret_val = -EFAULT;
-                               break;
-                       }
-               ret_val = ifx_ssc_frm_control_set(info);
-               break;
-        case IFX_SSC_HWOPTS_SET:
-               /* data must be a pointer to a struct ifx_ssc_hwopts */
-                /* if the buffers are not empty then the port is */
-                /* busy and we shouldn't change things on-the-fly! */
-                if (!info->txbuf || !info->rxbuf || 
-                   (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) 
-                    & IFX_SSC_STATE_BUSY)) {
-                        ret_val = -EBUSY;
-                        break;
-                }
-                if (from_kernel)
-                        memcpy((void *)&info->opts, (void *)data,
-                               sizeof(struct ifx_ssc_hwopts));
-                else
-                        if (copy_from_user((void *)&info->opts,
-                                           (void *)data,
-                                           sizeof(struct ifx_ssc_hwopts)))
-                        {
-                                ret_val = -EFAULT;
-                                break;
-                        }
-                if (ifx_ssc_hwinit(info) < 0)
-                {
-                        ret_val = -EIO;
-                }
-                break;
-        case IFX_SSC_HWOPTS_GET:
-               /* data must be a pointer to a struct ifx_ssc_hwopts */
-                if (from_kernel)
-                        memcpy((void *)data, (void *)&info->opts,
-                               sizeof(struct ifx_ssc_hwopts));
-                else
-                        if (copy_to_user((void *)data,
-                                         (void *)&info->opts,
-                                         sizeof(struct ifx_ssc_hwopts)))
-                                ret_val = -EFAULT;
-                break;
-        default:
-                ret_val = -ENOIOCTLCMD;
-       }
-
-       return ret_val;
-} /* ifx_ssc_ioctl */
-EXPORT_SYMBOL(ifx_ssc_ioctl);
-
-///* the poll routine */
-//static unsigned int
-//ifx_ssc_poll(struct file *filp, struct poll_table_struct *pts)
-//{
-//        int unit = MINOR(filp->f_dentry->d_inode->i_rdev);
-//     struct ifx_ssc_port *info;
-//        unsigned int mask = 0; 
-//     int spc;
-//
-//     info = &isp[unit];
-//
-//        /* add event to the wait queues */
-//        /* DO NOT FORGET TO DO A WAKEUP ON THESE !!!! */
-//        poll_wait(filp, &info->pwait, pts);
-//
-//     /* are there bytes in the RX SW-FIFO? */
-//        if (info->rxrp != info->rxwp)
-//                mask |= POLLIN | POLLRDNORM;
-//
-//     /* free space in the TX SW-FIFO */
-//     spc = info->txrp - info->txwp - 1;
-//     if (spc < 0)
-//             spc += TX_BUFSIZE;
-//#ifdef IFX_SSC_USEDMA
-//     /* writing always works, except in the DMA case when all descriptors */
-//     /* are used up */
-//     if (unit == 1 && info->dma_freecnt == 0)
-//             spc = 0;
-//#endif
-//     if (spc > 0)
-//             mask |= POLLOUT | POLLWRNORM;
-//
-//        return (mask);
-//}
-
-static int
-ifx_ssc1_read_proc(char *page, char **start, off_t offset, int count, int *eof, void *data)
-{
-       int off = 0;
-       unsigned long flags;
-
-       /* don't want any interrupts here */
-       save_flags(flags);
-       cli();
-
-
-       /* print statistics */
-       off += sprintf(page+off, "Statistics for Infineon Synchronous Serial Controller SSC1\n");
-       off += sprintf(page+off, "RX overflow errors %d\n", isp[0].stats.rxOvErr);
-       off += sprintf(page+off, "RX underflow errors %d\n", isp[0].stats.rxUnErr);
-       off += sprintf(page+off, "TX overflow errors %d\n", isp[0].stats.txOvErr);
-       off += sprintf(page+off, "TX underflow errors %d\n", isp[0].stats.txUnErr);
-       off += sprintf(page+off, "Abort errors %d\n", isp[0].stats.abortErr);
-       off += sprintf(page+off, "Mode errors %d\n", isp[0].stats.modeErr);
-       off += sprintf(page+off, "RX Bytes %d\n", isp[0].stats.rxBytes);
-       off += sprintf(page+off, "TX Bytes %d\n", isp[0].stats.txBytes);
-
-       restore_flags (flags); /* XXXXX */
-       *eof = 1;
-       return (off);
-}
-
-
-/*
- * This routine prints out the appropriate serial driver version number
- */
-static inline void
-show_version(void)
-{
-#if 0
-    printk("Infineon Technologies Synchronous Serial Controller (SSC) driver\n"
-           "  version %s - built %s %s\n", IFX_SSC_DRV_VERSION, __DATE__, __TIME__);
-#endif  
-} /* show_version */
-
-
-/*
- * Due to the fact that a port can be dynamically switched between slave
- * and master mode using an IOCTL the hardware is not initialized here,
- * but in ifx_ssc_hwinit() as a result of an IOCTL.
- */
-int __init
-ifx_ssc_init(void)
-{
-       struct ifx_ssc_port  *info;
-       int i, nbytes;
-       unsigned long flags;
-       int ret_val;
-
-       // ### TO DO: dynamic port count evaluation due to pin multiplexing
-
-       ret_val = -ENOMEM;
-       nbytes = PORT_CNT * sizeof(struct ifx_ssc_port);
-       isp = (struct ifx_ssc_port *)kmalloc(nbytes, GFP_KERNEL);
-       if (isp == NULL)
-       {
-               printk("%s: no memory for isp\n", __FUNCTION__);
-               return (ret_val);
-       }
-       memset(isp, 0, nbytes);
-
-       show_version();
-
-       /* register the device */
-       ret_val = -ENXIO;
-/*
-       i = maj;
-*/
-       if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0)
-       {
-               printk("Unable to register major %d for the Infineon SSC\n", maj);
-               if (maj == 0){
-                       goto errout;
-               }
-               else{
-                       maj = 0;
-                       if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0)
-                       {
-                               printk("Unable to register major %d for the Infineon SSC\n", maj);
-                               goto errout;
-                       }
-               }
-       }
-       if (maj == 0) maj = i;
-       //printk("registered major %d for Infineon SSC\n", maj);
-
-       /* set default values in ifx_ssc_port */
-       for (i = 0; i < PORT_CNT; i++) {
-               info = &isp[i];
-                info->port_nr = i;
-               /* default values for the HwOpts */
-               info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT;
-               info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT;
-               info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT;
-               info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT;
-               info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT;
-               info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK;
-               info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE;
-               info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA;
-               info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY;
-               info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE;
-               info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL;
-               info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH;
-               info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX;
-               info->opts.gpoCs = IFX_SSC_DEF_GPO_CS;
-               info->opts.gpoInv = IFX_SSC_DEF_GPO_INV;
-               info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE;
-               info->baud = IFX_SSC_DEF_BAUDRATE;
-               info->rxbuf = NULL;
-               info->txbuf = NULL;
-               /* values specific to SSC1 */
-               if (i == 0) {
-                       info->mapbase = AMAZON_SSC_BASE_ADD_0;
-                       // ### TO DO: power management
-
-                       // setting interrupt vectors
-                       info->txirq = IFX_SSC_TIR;
-                       info->rxirq = IFX_SSC_RIR;
-                       info->errirq = IFX_SSC_EIR;
-/*
-                       info->frmirq = IFX_SSC_FIR;
-*/
-               }
-               /* activate SSC */
-               /* CLC.DISS = 0 */
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC);
-
-// ### TO DO: multiple instances
-
-               init_waitqueue_head(&info->rwait);
-               //init_waitqueue_head(&info->pwait);
-
-               local_irq_save(flags);
-
-               // init serial framing register
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON);
-
-               /* try to get the interrupts */
-               // ### TO DO: interrupt handling with multiple instances
-               ret_val = ifx_int_wrapper.request(info->txirq, ifx_ssc_tx_int, 
-                                                 0, "ifx_ssc_tx", info);
-               if (ret_val){
-                       printk("%s: unable to get irq %d\n", __FUNCTION__,
-                                       info->txirq);
-                       local_irq_restore(flags);
-                       goto errout;
-               }
-               ret_val = ifx_int_wrapper.request(info->rxirq, ifx_ssc_rx_int, 
-                                                 0, "ifx_ssc_rx", info);
-               if (ret_val){
-                       printk("%s: unable to get irq %d\n", __FUNCTION__,
-                                       info->rxirq);
-                       local_irq_restore(flags);
-                       goto irqerr;
-               }
-               ret_val = ifx_int_wrapper.request(info->errirq, ifx_ssc_err_int, 
-                                                 0, "ifx_ssc_err", info);
-               if (ret_val){
-                       printk("%s: unable to get irq %d\n", __FUNCTION__,
-                                       info->errirq);
-                       local_irq_restore(flags);
-                       goto irqerr;
-               }
-/*
-               ret_val = ifx_int_wrapper.request(info->frmirq, ifx_ssc_frm_int, 
-                                                 0, "ifx_ssc_frm", info);
-               if (ret_val){
-                       printk("%s: unable to get irq %d\n", __FUNCTION__,
-                                       info->frmirq);
-                       local_irq_restore(flags);
-                       goto irqerr;
-               }
-
-*/
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN);
-
-               local_irq_restore(flags);
-       } // for (i = 0; i < PORT_CNT; i++)
-
-       /* init the SSCs with default values */
-       for (i = 0; i < PORT_CNT; i++)
-       {
-               info = &isp[i];
-               if (ifx_ssc_hwinit(info) < 0)
-               {
-                       printk("%s: hardware init failed for port %d\n",
-                               __FUNCTION__, i);
-                       goto irqerr;
-               }
-       }
-
-       /* register /proc read handler */
-       // ### TO DO: multiple instances
-       /* for SSC1, which is always present */
-       create_proc_read_entry("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL);
-       return 0;
-
-irqerr:
-       // ### TO DO: multiple instances
-       ifx_int_wrapper.free(isp[0].txirq,&isp[0]);
-       ifx_int_wrapper.free(isp[0].rxirq,&isp[0]);
-       ifx_int_wrapper.free(isp[0].errirq,&isp[0]);
-/*
-       ifx_int_wrapper.free(isp[0].frmirq, &isp[0]);
-*/
-errout:
-       /* free up any allocated memory in the error case */
-       kfree(isp);
-       return (ret_val);
-} /* ifx_ssc_init */
-
-
-void
-ifx_ssc_cleanup_module(void)
-{
-       int i;
-
-       /* free up any allocated memory */
-       for (i = 0; i < PORT_CNT; i++)
-       {
-               /* disable the SSC */
-               WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,isp[i].mapbase + IFX_SSC_WHBSTATE);
-               /* free the interrupts */
-               ifx_int_wrapper.free(isp[i].txirq, &isp[i]);
-               ifx_int_wrapper.free(isp[i].rxirq, &isp[i]);
-               ifx_int_wrapper.free(isp[i].errirq, &isp[i]);
-/*
-               ifx_int_wrapper.free(isp[i].frmirq, &isp[i]);
-
-               if (isp[i].rxbuf != NULL)
-                       kfree(isp[i].rxbuf);
-               if (isp[i].txbuf != NULL)
-                       kfree(isp[i].txbuf);
-*/
-       }
-       kfree(isp);
-       /* unregister the device */
-       if (unregister_chrdev(maj, "ssc"))
-       {
-               printk("Unable to unregister major %d for the SSC\n", maj);
-       }
-       /* delete /proc read handler */
-       remove_proc_entry("driver/ssc1", NULL);
-       remove_proc_entry("driver/ssc2", NULL);
-} /* ifx_ssc_cleanup_module */
-
-module_exit(ifx_ssc_cleanup_module);
-
-/* Module entry-points */
-module_init(ifx_ssc_init);
-
-#ifndef MODULE
-static int __init
-ifx_ssc_set_maj(char *str)
-{
-       maj = simple_strtol(str, NULL, 0);
-       return 1;
-}
-__setup("ssc_maj=", ifx_ssc_set_maj);
-#endif /* !MODULE */
-
-#define AMAZON_SSC_EMSG(fmt,arg...) printk("%s: "fmt,__FUNCTION__, ##arg)
-/* Brief:      chip select enable
- */
-inline int amazon_ssc_cs_low(u32 pin)
-{
-       int ret=0;
-       if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_CLR, (unsigned long)&pin))){
-               AMAZON_SSC_EMSG("clear CS %d fails\n",pin);
-       }
-       wmb();
-       return ret;
-}
-EXPORT_SYMBOL(amazon_ssc_cs_low);
-/* Brief:      chip select disable
- */
-inline int amazon_ssc_cs_high(u32 pin)
-{
-       int ret=0;
-       if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_SET, (unsigned long)&pin))){
-               AMAZON_SSC_EMSG("set CS %d fails\n", pin);
-       }
-       wmb();
-       return ret;
-}
-EXPORT_SYMBOL(amazon_ssc_cs_high);
-/* Brief:      one SSC session
- * Parameter:  
- *     tx_buf
- *     tx_len
- *     rx_buf
- *     rx_len
- *     session_mode: IFX_SSC_MODE_RXTX or IFX_SSC_MODE_TX
- * Return:     >=0 number of bytes received (if rx_buf != 0) or transmitted
- *             <0 error code
- * Description:
- *     0. copy data to internal buffer 
- *     1. Write command
- *     2a. If SSC_SESSION_MODE_TXONLY, read tx_len data
- *     2b. If not Read back (tx_len + rx_len) data
- *     3. copy internal buffer to rx buf if necessary
- */
-static int ssc_session(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len)
-{
-       int ret=0;
-
-       char * ssc_tx_buf=NULL;
-       char * ssc_rx_buf=NULL;
-
-//     volatile char ssc_tx_buf[128]={0};
-//     volatile char ssc_rx_buf[128]={0};
-
-       int eff_size=0;
-       u8 mode=0;
-       
-       if (tx_buf == NULL && tx_len ==0 && rx_buf == NULL && rx_len == 0){
-               AMAZON_SSC_EMSG("invalid parameters\n");
-               ret=-EINVAL;
-               goto ssc_session_exit;
-       }else if (tx_buf == NULL || tx_len == 0){
-               if (rx_buf != NULL && rx_len != 0){
-                       mode = IFX_SSC_MODE_RX;
-               }else{
-                       AMAZON_SSC_EMSG("invalid parameters\n");
-                       ret=-EINVAL;
-                       goto ssc_session_exit;
-               }
-       }else if (rx_buf == NULL || rx_len ==0){
-               if (tx_buf != NULL && tx_len != 0){
-                       mode = IFX_SSC_MODE_TX;
-               }else{
-                       AMAZON_SSC_EMSG("invalid parameters\n");
-                       ret=-EINVAL;
-                       goto ssc_session_exit;
-               }
-       }else{
-               mode = IFX_SSC_MODE_RXTX;
-       }
-       
-       if (mode == IFX_SSC_MODE_RXTX){
-               eff_size = tx_len + rx_len;
-       }else if (mode == IFX_SSC_MODE_RX){
-               eff_size = rx_len;
-       }else{
-               eff_size = tx_len;
-       }
-
-       //4 bytes alignment,  required by driver
-       /* change by TaiCheng */
-       //if (in_irq()){
-       if (1){
-               ssc_tx_buf = (char*) kmalloc(sizeof(char) *  ((eff_size + 3) & (~3)), GFP_ATOMIC);
-               ssc_rx_buf = (char*) kmalloc(sizeof(char) *  ((eff_size + 3) & (~3)), GFP_ATOMIC);
-       }else{
-               ssc_tx_buf = (char*) kmalloc(sizeof(char) *  ((eff_size + 3) & (~3)), GFP_KERNEL);
-               ssc_rx_buf = (char*) kmalloc(sizeof(char) *  ((eff_size + 3) & (~3)), GFP_KERNEL);
-       }
-       if (ssc_tx_buf == NULL || ssc_rx_buf == NULL){
-               AMAZON_SSC_EMSG("no memory for size of %d\n", eff_size);
-               ret = -ENOMEM;
-               goto ssc_session_exit;
-       }
-       memset((void*)ssc_tx_buf, 0, eff_size);
-       memset((void*)ssc_rx_buf, 0, eff_size);
-
-       if (tx_len>0){
-               memcpy(ssc_tx_buf, tx_buf, tx_len);
-       }
-       
-       ret=ifx_ssc_kwrite(0, ssc_tx_buf, eff_size);
-
-       if (ret > 0) {
-               ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite
-       }
-               
-       if (  ret != eff_size ){
-               AMAZON_SSC_EMSG("ifx_ssc_write return %d\n",ret); 
-               goto ssc_session_exit;
-       }
-       ret=ifx_ssc_kread(0, ssc_rx_buf,eff_size);
-       if (  ret != eff_size ){
-               AMAZON_SSC_EMSG("ifx_ssc_read return %d\n",ret); 
-               goto ssc_session_exit;
-       }
-       
-       memcpy(rx_buf, ssc_rx_buf+tx_len, rx_len);
-       
-       if (mode == IFX_SSC_MODE_TX) {
-               ret = tx_len;
-       }else{
-               ret = rx_len;
-       }
-ssc_session_exit:
-
-       if (ssc_tx_buf != NULL) kfree(ssc_tx_buf);
-       if (ssc_rx_buf != NULL) kfree(ssc_rx_buf);
-
-       if (ret<0) {
-               printk("ssc session fails\n");
-       }
-       return ret;
-}
-/* Brief:      TX-RX session
- * Parameter:  
- *     tx_buf
- *     tx_len
- *     rx_buf
- *     rx_len
- * Return:     >=0 number of bytes received
- *             <0 error code
- * Description: 
- *     1. TX session
- *     2. RX session
- */
-int amazon_ssc_txrx(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len)
-{
-       return ssc_session(tx_buf,tx_len,rx_buf,rx_len);
-}
-EXPORT_SYMBOL(amazon_ssc_txrx);
-/* Brief:      TX only session
- * Parameter:
- *     tx_buf
- *     tx_len
- * Return:     >=0 number of bytes transmitted
- *             <0 error code
- */
-int amazon_ssc_tx(char * tx_buf, u32 tx_len)
-{
-       return ssc_session(tx_buf,tx_len,NULL,0);
-}
-EXPORT_SYMBOL(amazon_ssc_tx);
-/* Brief:      RX only session
- * Parameter:
- *     rx_buf
- *     rx_len
- * Return:     >=0 number of bytes received
- *             <0 error code
- */
-int amazon_ssc_rx(char * rx_buf, u32 rx_len)
-{
-       return ssc_session(NULL,0,rx_buf,rx_len);
-}
-EXPORT_SYMBOL(amazon_ssc_rx);
-
diff --git a/target/linux/amazon/files/drivers/mtd/maps/amazon.c b/target/linux/amazon/files/drivers/mtd/maps/amazon.c
deleted file mode 100644 (file)
index 568f7d8..0000000
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Handle mapping of the flash memory access routines
- * on Amazon  based devices.
- *
- * Copyright(C) 2004 peng.liu@infineon.com
- *
- * This code is GPLed
- *
- */
-// 000005:fchang 2005/6/2 Modified by Bingtao to double check if the EBU is enabled/disabled
-// 506231:tc.chen 2005/06/23 increase firmware partition size form 192KB to 256KB
-// 050701:linmars 2005/07/01 fix flash size wrong alignment after increase firmware partition
-// 165001:henryhsu 2005/8/18 Remove the support for Intel flash because of 2.1 not enough rootfs partition size
-// 165001:henryhsu 2005/9/7 Rolback to support INtel flash
-// 509071:tc.chen 2005/09/07 Reduced flash writing time
-// 511046:linmars 2005/11/04 change bootloader size from 128 into 64
-// 511241:linmars 2005/11/24 merge TaiChen's IRM patch 
-
-// copyright 2005 infineon
-
-// copyright 2007 john crispin <blogic@openwrt.org>
-// copyright 2007 felix fietkau <nbd@openwrt.org>
-// copyright 2009 hauke mehrtens <hauke@hauke-m.de>
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/cfi.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <asm/amazon/amazon.h>
-
-#define AMAZON_PCI_ARB_CTL_ALT 0xb100205c
-#define AMAZON_MTD_REG32( addr )          (*(volatile u32 *)(addr))
-
-
-static struct map_info amazon_map = {
-       .name = "AMAZON_FLASH",
-       .bankwidth = 2,
-};
-
-static map_word amazon_read16(struct map_info * map, unsigned long ofs)
-{
-       map_word temp;
-       ofs ^= 2;
-       temp.x[0] = *((__u16 *) (map->virt + ofs));
-       return temp;
-}
-
-static void amazon_write16(struct map_info *map, map_word d, unsigned long adr)
-{
-       adr ^= 2;
-       *((__u16 *) (map->virt + adr)) = d.x[0];
-}
-
-void amazon_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-       u8 *p;
-       u8 *to_8;
-       from = (unsigned long) (from + map->virt);
-       p = (u8 *) from;
-       to_8 = (u8 *) to;
-       while(len--){
-               *to_8++ = *p++;
-       }
-}
-
-void amazon_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
-       u8 *p =  (u8*) from;
-       u8 *to_8;
-       to += (unsigned long) map->virt;
-       to_8 = (u8*)to;
-       while(len--){
-               *p++ = *to_8++;
-       }
-}
-
-#define UBOOT_SIZE             0x40000
-
-static struct mtd_partition    amazon_partitions[3] = {
-        {
-                 name:"U-Boot",                /* U-Boot firmware */
-                 offset:0x00000000,
-                 size:UBOOT_SIZE ,             /* 128k */
-         },
-        {
-                 name:"kernel",                /* firmware */
-                 offset:UBOOT_SIZE,
-                 size:0x00100000,              /* 192K */
-         },
-        {
-                 name:"rootfs",                /* default partition */
-                 offset:0x00200000,
-                 size:0x00200000,
-         },
-};
-
-unsigned long uImage_size = 0x10000d;
-
-int find_uImage_size(unsigned long start_offset)
-{
-       unsigned long magic;
-       unsigned long temp;
-       amazon_copy_from(&amazon_map, &magic, start_offset, 4);
-       if (!(ntohl(magic) == 0x27051956)) {
-               printk(KERN_INFO "amazon_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", ntohl(magic), start_offset);
-               return 0;
-       }
-       amazon_copy_from(&amazon_map, &temp, start_offset + 12, 4);
-       printk(KERN_INFO "amazon_mtd: kernel size is %ld \n", temp + 0x40);
-       return temp + 0x40;
-}
-
-static int amazon_mtd_probe(struct platform_device *dev)
-{
-       unsigned long uimage_size;
-       struct mtd_info *mymtd = NULL;
-       struct mtd_partition *parts = NULL;
-
-       *AMAZON_EBU_BUSCON0 = 0x1d7ff;
-       
-       amazon_map.read = amazon_read16;
-       amazon_map.write = amazon_write16;
-       amazon_map.copy_from = amazon_copy_from;
-       amazon_map.copy_to = amazon_copy_to;
-
-       amazon_map.phys = dev->resource->start;
-       amazon_map.size = dev->resource->end - amazon_map.phys + 1;
-       amazon_map.virt = ioremap_nocache(amazon_map.phys, amazon_map.size);
-       
-       if (!amazon_map.virt) {
-               printk(KERN_WARNING "amazon_mtd: Failed to ioremap!\n");
-               return -EIO;
-       }
-       
-       mymtd = (struct mtd_info *) do_map_probe("cfi_probe", &amazon_map);
-       if (!mymtd) {
-               iounmap(amazon_map.virt);
-               printk(KERN_WARNING "amazon_mtd: probing failed\n");
-               return -ENXIO;
-       }
-
-       mymtd->owner = THIS_MODULE;
-       parts = &amazon_partitions[0];
-
-       /* Some Samsung devices are containing a 16 MB flash chip with a bigger U-Boot partition. */
-       if(mymtd->size == 0x01000000 && mymtd->erasesize == 0x00020000) {
-               printk(KERN_INFO "amazon_mtd: Found big flash chip!\n");
-               amazon_partitions[0].size = 0x60000;
-               amazon_partitions[1].offset = 0x60000;
-               uimage_size = find_uImage_size(amazon_partitions[1].offset);
-               amazon_partitions[1].size = uimage_size;
-               amazon_partitions[2].offset = 0x60000 + uimage_size;
-               amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - mymtd->erasesize;
-       } else {
-               printk(KERN_INFO "amazon_mtd: Found small flash chip!\n");
-               uimage_size = find_uImage_size(amazon_partitions[1].offset);
-               amazon_partitions[1].size = uimage_size;
-               amazon_partitions[2].offset = UBOOT_SIZE + uimage_size;
-               amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - (2 * mymtd->erasesize);
-       }
-
-       mtd_device_register(mymtd, parts, 3);
-
-       printk(KERN_INFO "amazon_mtd: added %s flash with %dMB\n",
-               amazon_map.name, ((int)mymtd->size) >> 20);
-       return 0;
-}
-
-static struct platform_driver amazon_mtd_driver = {
-       .probe = amazon_mtd_probe,
-       .driver = {
-               .name = "amazon_mtd",
-               .owner = THIS_MODULE,
-       },
-};
-
-static int __init amazon_mtd_init(void)
-{
-       int ret = platform_driver_register(&amazon_mtd_driver);
-       if (ret)
-               printk(KERN_WARNING "amazon_mtd: error registering platfom driver!\n");
-       return ret;
-}
-
-static void __exit amazon_mtd_cleanup(void)
-{
-       platform_driver_unregister(&amazon_mtd_driver);
-}
-
-module_init(amazon_mtd_init);
-module_exit(amazon_mtd_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("john crispin blogic@openwrt.org");
-MODULE_DESCRIPTION("MTD map driver for AMAZON boards");
-
diff --git a/target/linux/amazon/files/drivers/net/ethernet/admmod.c b/target/linux/amazon/files/drivers/net/ethernet/admmod.c
deleted file mode 100644 (file)
index a11ee1d..0000000
+++ /dev/null
@@ -1,1493 +0,0 @@
-/******************************************************************************
-     Copyright (c) 2004, Infineon Technologies.  All rights reserved.
-
-                               No Warranty
-   Because the program is licensed free of charge, there is no warranty for
-   the program, to the extent permitted by applicable law.  Except when
-   otherwise stated in writing the copyright holders and/or other parties
-   provide the program "as is" without warranty of any kind, either
-   expressed or implied, including, but not limited to, the implied
-   warranties of merchantability and fitness for a particular purpose. The
-   entire risk as to the quality and performance of the program is with
-   you.  should the program prove defective, you assume the cost of all
-   necessary servicing, repair or correction.
-
-   In no event unless required by applicable law or agreed to in writing
-   will any copyright holder, or any other party who may modify and/or
-   redistribute the program as permitted above, be liable to you for
-   damages, including any general, special, incidental or consequential
-   damages arising out of the use or inability to use the program
-   (including but not limited to loss of data or data being rendered
-   inaccurate or losses sustained by you or third parties or a failure of
-   the program to operate with any other programs), even if such holder or
-   other party has been advised of the possibility of such damages.
- ******************************************************************************
-   Module      : admmod.c
-   Date        : 2004-09-01
-   Description : JoeLin
-   Remarks:
-
-   Revision:
-       MarsLin, add to support VLAN
-
- *****************************************************************************/
-//000001.joelin 2005/06/02 add"ADM6996_MDC_MDIO_MODE" define, 
-//             if define ADM6996_MDC_MDIO_MODE==> ADM6996LC and ADM6996I will be in MDIO/MDC(SMI)(16 bit) mode,
-//             amazon should contrl ADM6996 by MDC/MDIO pin
-//             if undef ADM6996_MDC_MDIO_MODE==> ADM6996  will be in EEProm(32 bit) mode,
-//             amazon should contrl ADM6996 by GPIO15,16,17,18  pin
-/* 507281:linmars 2005/07/28 support MDIO/EEPROM config mode */
-/* 509201:linmars remove driver testing codes */
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/proc_fs.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include <linux/init.h>
-#include <linux/ioctl.h>
-#include <asm/atomic.h>
-#include <asm-mips/amazon/amazon.h>
-#include <asm-mips/amazon/adm6996.h>
-//#include <linux/amazon/adm6996.h>
-
-
-unsigned int ifx_sw_conf[ADM_SW_MAX_PORT_NUM+1] = \
-       {ADM_SW_PORT0_CONF, ADM_SW_PORT1_CONF, ADM_SW_PORT2_CONF, \
-       ADM_SW_PORT3_CONF, ADM_SW_PORT4_CONF, ADM_SW_PORT5_CONF};
-unsigned int ifx_sw_bits[8] = \
-       {0x1, 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff};
-unsigned int ifx_sw_vlan_port[6] = {0, 2, 4, 6, 7, 8};
-//050613:fchang 
-/* 507281:linmars start */
-#ifdef CONFIG_SWITCH_ADM6996_MDIO
-#define ADM6996_MDC_MDIO_MODE 1 //000001.joelin
-#else
-#undef ADM6996_MDC_MDIO_MODE
-#endif
-/* 507281:linmars end */
-#define adm6996i 0
-#define adm6996lc 1
-#define adm6996l  2
-unsigned int adm6996_mode=adm6996i;
-/*
-  initialize GPIO pins.
-  output mode, low
-*/
-void ifx_gpio_init(void)
-{
- //GPIO16,17,18 direction:output
- //GPIO16,17,18 output 0
-    AMAZON_SW_REG(AMAZON_GPIO_P1_DIR) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT) =AMAZON_SW_REG(AMAZON_GPIO_P1_IN)& ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-
-}
-
-/* read one bit from mdio port */
-int ifx_sw_mdio_readbit(void)
-{
-    //int val;
-
-    //val = (AMAZON_SW_REG(GPIO_conf0_REG) & GPIO0_INPUT_MASK) >> 8;
-    //return val;
-    //GPIO16
-    return AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&1;
-}
-
-/*
-  MDIO mode selection
-  1 -> output
-  0 -> input
-
-  switch input/output mode of GPIO 0
-*/
-void ifx_mdio_mode(int mode)
-{
-//    AMAZON_SW_REG(GPIO_conf0_REG) = mode ? GPIO_ENABLEBITS :
-//                             ((GPIO_ENABLEBITS | MDIO_INPUT) & ~MDIO_OUTPUT_EN);
-    mode?(AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)|=GPIO_MDIO):
-         (AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)&=~GPIO_MDIO);
-    /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_DIR);
-    mode?(r|=GPIO_MDIO):(r&=~GPIO_MDIO);
-    AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)=r;*/
-}
-
-void ifx_mdc_hi(void)
-{
-    //GPIO_SET_HI(GPIO_MDC);
-    //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDC;
-    /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
-    r|=GPIO_MDC;
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDC;
-}
-
-void ifx_mdio_hi(void)
-{
-    //GPIO_SET_HI(GPIO_MDIO);
-    //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDIO;
-    /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
-    r|=GPIO_MDIO;
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDIO;
-}
-
-void ifx_mdcs_hi(void)
-{
-    //GPIO_SET_HI(GPIO_MDCS);
-    //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDCS;
-    /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
-    r|=GPIO_MDCS;
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDCS;
-}
-
-void ifx_mdc_lo(void)
-{
-    //GPIO_SET_LOW(GPIO_MDC);
-    //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDC;
-    /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
-    r&=~GPIO_MDC;
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDC);
-}
-
-void ifx_mdio_lo(void)
-{
-    //GPIO_SET_LOW(GPIO_MDIO);
-    //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDIO;
-    /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
-    r&=~GPIO_MDIO;
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDIO);
-}
-
-void ifx_mdcs_lo(void)
-{
-    //GPIO_SET_LOW(GPIO_MDCS);
-    //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDCS;
-    /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
-    r&=~GPIO_MDCS;
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-    
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDCS);
-}
-
-/*
-  mdc pulse
-  0 -> 1 -> 0
-*/
-static void ifx_sw_mdc_pulse(void)
-{
-    ifx_mdc_lo();
-    udelay(ADM_SW_MDC_DOWN_DELAY);
-    ifx_mdc_hi();
-    udelay(ADM_SW_MDC_UP_DELAY);
-    ifx_mdc_lo();
-}
-
-/*
-  mdc toggle
-  1 -> 0
-*/
-static void ifx_sw_mdc_toggle(void)
-{
-    ifx_mdc_hi();
-    udelay(ADM_SW_MDC_UP_DELAY);
-    ifx_mdc_lo();
-    udelay(ADM_SW_MDC_DOWN_DELAY);
-}
-
-/*
-  enable eeprom write
-  For ATC 93C66 type EEPROM; accessing ADM6996 internal EEPROM type registers
-*/
-static void ifx_sw_eeprom_write_enable(void)
-{
-    unsigned int op;
-
-    ifx_mdcs_lo();
-    ifx_mdc_lo();
-    ifx_mdio_hi();
-    udelay(ADM_SW_CS_DELAY);
-    /* enable chip select */
-    ifx_mdcs_hi();
-    udelay(ADM_SW_CS_DELAY);
-    /* start bit */
-    ifx_mdio_hi();
-    ifx_sw_mdc_pulse();
-
-    /* eeprom write enable */
-    op = ADM_SW_BIT_MASK_4;
-    while (op)
-    {
-        if (op & ADM_SW_EEPROM_WRITE_ENABLE)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
-    while (op)
-    {
-        ifx_mdio_lo();
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-    /* disable chip select */
-    ifx_mdcs_lo();
-    udelay(ADM_SW_CS_DELAY);
-    ifx_sw_mdc_pulse();
-}
-
-/*
-  disable eeprom write
-*/
-static void ifx_sw_eeprom_write_disable(void)
-{
-    unsigned int op;
-
-    ifx_mdcs_lo();
-    ifx_mdc_lo();
-    ifx_mdio_hi();
-    udelay(ADM_SW_CS_DELAY);
-    /* enable chip select */
-    ifx_mdcs_hi();
-    udelay(ADM_SW_CS_DELAY);
-
-    /* start bit */
-    ifx_mdio_hi();
-    ifx_sw_mdc_pulse();
-    /* eeprom write disable */
-    op = ADM_SW_BIT_MASK_4;
-    while (op)
-    {
-        if (op & ADM_SW_EEPROM_WRITE_DISABLE)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
-    while (op)
-    {
-        ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-    /* disable chip select */
-    ifx_mdcs_lo();
-    udelay(ADM_SW_CS_DELAY);
-    ifx_sw_mdc_pulse();
-}
-
-/*
-  read registers from ADM6996
-  serial registers start at 0x200 (addr bit 9 = 1b)
-  EEPROM registers -> 16bits; Serial registers -> 32bits
-*/
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode//000001.joelin
-static int ifx_sw_read_adm6996i_smi(unsigned int addr, unsigned int *dat)
-{
-   addr=(addr<<16)&0x3ff0000;
-   AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) =(0xC0000000|addr);
-   while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
-   *dat=((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x0FFFF);
-    return 0;
-}
-#endif
-
-static int ifx_sw_read_adm6996i(unsigned int addr, unsigned int *dat)
-{
-    unsigned int op;
-
-    ifx_gpio_init();
-
-    ifx_mdcs_hi();
-    udelay(ADM_SW_CS_DELAY);
-
-    ifx_mdcs_lo();
-    ifx_mdc_lo();
-    ifx_mdio_lo();
-
-    udelay(ADM_SW_CS_DELAY);
-
-    /* preamble, 32 bit 1 */
-    ifx_mdio_hi();
-    op = ADM_SW_BIT_MASK_32;
-    while (op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* command start (01b) */
-    op = ADM_SW_BIT_MASK_2;
-    while (op)
-    {
-        if (op & ADM_SW_SMI_START)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* read command (10b) */
-    op = ADM_SW_BIT_MASK_2;
-    while (op)
-    {
-        if (op & ADM_SW_SMI_READ)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* send address A9 ~ A0 */
-    op = ADM_SW_BIT_MASK_10;
-    while (op)
-    {
-        if (op & addr)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* turnaround bits */
-    op = ADM_SW_BIT_MASK_2;
-    ifx_mdio_hi();
-    while (op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    udelay(ADM_SW_MDC_DOWN_DELAY);
-
-    /* set MDIO pin to input mode */
-    ifx_mdio_mode(ADM_SW_MDIO_INPUT);
-
-    /* start read data */
-    *dat = 0;
-//adm6996i    op = ADM_SW_BIT_MASK_32;
-    op = ADM_SW_BIT_MASK_16;//adm6996i
-    while (op)
-    {
-        *dat <<= 1;
-        if (ifx_sw_mdio_readbit()) *dat |= 1;
-        ifx_sw_mdc_toggle();
-
-        op >>= 1;
-    }
-
-    /* set MDIO to output mode */
-    ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
-    /* dummy clock */
-    op = ADM_SW_BIT_MASK_4;
-    ifx_mdio_lo();
-    while(op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    ifx_mdc_lo();
-    ifx_mdio_lo();
-    ifx_mdcs_hi();
-
-    /* EEPROM registers */
-//adm6996i    if (!(addr & 0x200))
-//adm6996i    {
-//adm6996i        if (addr % 2)
-//adm6996i            *dat >>= 16;
-//adm6996i        else
-//adm6996i        *dat &= 0xffff;
-//adm6996i    }
-
-    return 0;
-}
-//adm6996
-static int ifx_sw_read_adm6996l(unsigned int addr, unsigned int *dat)
-{
-    unsigned int op;
-
-    ifx_gpio_init();
-
-    ifx_mdcs_hi();
-    udelay(ADM_SW_CS_DELAY);
-
-    ifx_mdcs_lo();
-    ifx_mdc_lo();
-    ifx_mdio_lo();
-
-    udelay(ADM_SW_CS_DELAY);
-
-    /* preamble, 32 bit 1 */
-    ifx_mdio_hi();
-    op = ADM_SW_BIT_MASK_32;
-    while (op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* command start (01b) */
-    op = ADM_SW_BIT_MASK_2;
-    while (op)
-    {
-        if (op & ADM_SW_SMI_START)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* read command (10b) */
-    op = ADM_SW_BIT_MASK_2;
-    while (op)
-    {
-        if (op & ADM_SW_SMI_READ)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* send address A9 ~ A0 */
-    op = ADM_SW_BIT_MASK_10;
-    while (op)
-    {
-        if (op & addr)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* turnaround bits */
-    op = ADM_SW_BIT_MASK_2;
-    ifx_mdio_hi();
-    while (op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    udelay(ADM_SW_MDC_DOWN_DELAY);
-
-    /* set MDIO pin to input mode */
-    ifx_mdio_mode(ADM_SW_MDIO_INPUT);
-
-    /* start read data */
-    *dat = 0;
-    op = ADM_SW_BIT_MASK_32;
-    while (op)
-    {
-        *dat <<= 1;
-        if (ifx_sw_mdio_readbit()) *dat |= 1;
-        ifx_sw_mdc_toggle();
-
-        op >>= 1;
-    }
-
-    /* set MDIO to output mode */
-    ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
-    /* dummy clock */
-    op = ADM_SW_BIT_MASK_4;
-    ifx_mdio_lo();
-    while(op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    ifx_mdc_lo();
-    ifx_mdio_lo();
-    ifx_mdcs_hi();
-
-    /* EEPROM registers */
-    if (!(addr & 0x200))
-    {
-        if (addr % 2)
-            *dat >>= 16;
-        else
-        *dat &= 0xffff;
-    }
-
-    return 0;
-}
-
-static int ifx_sw_read(unsigned int addr, unsigned int *dat)
-{
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
-       ifx_sw_read_adm6996i_smi(addr,dat);
-#else  
-       if (adm6996_mode==adm6996i) ifx_sw_read_adm6996i(addr,dat);
-               else ifx_sw_read_adm6996l(addr,dat);
-#endif         
-       return 0;
-       
-}
-
-/*
-  write register to ADM6996 eeprom registers
-*/
-//for adm6996i -start
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
-static int ifx_sw_write_adm6996i_smi(unsigned int addr, unsigned int dat)
-{
-   AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) = ((addr<<16)&0x3ff0000)|dat|0x80000000;
-   while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
-  
-    return 0;
-}
-#endif //ADM6996_MDC_MDIO_MODE //000001.joelin
-
-static int ifx_sw_write_adm6996i(unsigned int addr, unsigned int dat)
-{
-    unsigned int op;
-
-    ifx_gpio_init();
-
-    ifx_mdcs_hi();
-    udelay(ADM_SW_CS_DELAY);
-
-    ifx_mdcs_lo();
-    ifx_mdc_lo();
-    ifx_mdio_lo();
-
-    udelay(ADM_SW_CS_DELAY);
-
-    /* preamble, 32 bit 1 */
-    ifx_mdio_hi();
-    op = ADM_SW_BIT_MASK_32;
-    while (op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* command start (01b) */
-    op = ADM_SW_BIT_MASK_2;
-    while (op)
-    {
-        if (op & ADM_SW_SMI_START)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* write command (01b) */
-    op = ADM_SW_BIT_MASK_2;
-    while (op)
-    {
-        if (op & ADM_SW_SMI_WRITE)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* send address A9 ~ A0 */
-    op = ADM_SW_BIT_MASK_10;
-    while (op)
-    {
-        if (op & addr)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* turnaround bits */
-    op = ADM_SW_BIT_MASK_2;
-    ifx_mdio_hi();
-    while (op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    udelay(ADM_SW_MDC_DOWN_DELAY);
-
-    /* set MDIO pin to output mode */
-    ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
-  
-    /* start write data */
-    op = ADM_SW_BIT_MASK_16;
-    while (op)
-    {
-        if (op & dat)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_toggle();
-        op >>= 1;
-    }
-
- //   /* set MDIO to output mode */
- //   ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
-    /* dummy clock */
-    op = ADM_SW_BIT_MASK_4;
-    ifx_mdio_lo();
-    while(op)
-    {
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    ifx_mdc_lo();
-    ifx_mdio_lo();
-    ifx_mdcs_hi();
-
-    /* EEPROM registers */
-//adm6996i    if (!(addr & 0x200))
-//adm6996i    {
-//adm6996i        if (addr % 2)
-//adm6996i            *dat >>= 16;
-//adm6996i        else
-//adm6996i        *dat &= 0xffff;
-//adm6996i    }
-
-    return 0;
-}
-//for adm6996i-end
-static int ifx_sw_write_adm6996l(unsigned int addr, unsigned int dat)
-{
-    unsigned int op;
-
-    ifx_gpio_init();
-
-    /* enable write */
-    ifx_sw_eeprom_write_enable();
-
-    /* chip select */
-    ifx_mdcs_hi();
-    udelay(ADM_SW_CS_DELAY);
-
-    /* issue write command */
-    /* start bit */
-    ifx_mdio_hi();
-    ifx_sw_mdc_pulse();
-
-    /* EEPROM write command */
-    op = ADM_SW_BIT_MASK_2;
-    while (op)
-    {
-        if (op & ADM_SW_EEPROM_WRITE)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_pulse();
-        op >>= 1;
-    }
-
-    /* send address A7 ~ A0 */
-    op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 1);
-
-    while (op)
-    {
-        if (op & addr)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_toggle();
-        op >>= 1;
-    }
-
-    /* start write data */
-    op = ADM_SW_BIT_MASK_16;
-    while (op)
-    {
-        if (op & dat)
-            ifx_mdio_hi();
-        else
-            ifx_mdio_lo();
-
-        ifx_sw_mdc_toggle();
-        op >>= 1;
-    }
-
-    /* disable cs & wait 1 clock */
-    ifx_mdcs_lo();
-    udelay(ADM_SW_CS_DELAY);
-    ifx_sw_mdc_toggle();
-
-    ifx_sw_eeprom_write_disable();
-
-    return 0;
-}
-
-static int ifx_sw_write(unsigned int addr, unsigned int dat)
-{
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
-       ifx_sw_write_adm6996i_smi(addr,dat);
-#else  //000001.joelin
-       if (adm6996_mode==adm6996i) ifx_sw_write_adm6996i(addr,dat);
-               else ifx_sw_write_adm6996l(addr,dat);
-#endif //000001.joelin
-       return 0;
-}
-
-/*
-  do switch PHY reset
-*/
-int ifx_sw_reset(void)
-{
-    /* reset PHY */
-    ifx_sw_write(ADM_SW_PHY_RESET, 0);
-
-    return 0;
-}
-
-/* 509201:linmars start */
-#if 0
-/*
-  check port status
-*/
-int ifx_check_port_status(int port)
-{
-    unsigned int val;
-
-    if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM))
-    {
-        ifx_printf(("error on port number (%d)!!\n", port));
-        return -1;
-    }
-
-    ifx_sw_read(ifx_sw_conf[port], &val);
-    if (ifx_sw_conf[port]%2) val >>= 16;
-    /* only 16bits are effective */
-    val &= 0xFFFF;
-
-    ifx_printf(("Port %d status (%.8x): \n", port, val));
-
-    if (val & ADM_SW_PORT_FLOWCTL)
-        ifx_printf(("\t802.3x flow control supported!\n"));
-    else
-        ifx_printf(("\t802.3x flow control not supported!\n"));
-
-    if (val & ADM_SW_PORT_AN)
-        ifx_printf(("\tAuto negotiation ON!\n"));
-    else
-        ifx_printf(("\tAuto negotiation OFF!\n"));
-
-    if (val & ADM_SW_PORT_100M)
-        ifx_printf(("\tLink at 100M!\n"));
-    else
-        ifx_printf(("\tLink at 10M!\n"));
-
-    if (val & ADM_SW_PORT_FULL)
-        ifx_printf(("\tFull duplex!\n"));
-    else
-        ifx_printf(("\tHalf duplex!\n"));
-
-    if (val & ADM_SW_PORT_DISABLE)
-        ifx_printf(("\tPort disabled!\n"));
-    else
-        ifx_printf(("\tPort enabled!\n"));
-
-    if (val & ADM_SW_PORT_TOS)
-        ifx_printf(("\tTOS enabled!\n"));
-    else
-        ifx_printf(("\tTOS disabled!\n"));
-
-    if (val & ADM_SW_PORT_PPRI)
-        ifx_printf(("\tPort priority first!\n"));
-    else
-        ifx_printf(("\tVLAN or TOS priority first!\n"));
-
-    if (val & ADM_SW_PORT_MDIX)
-        ifx_printf(("\tAuto MDIX!\n"));
-    else
-        ifx_printf(("\tNo auto MDIX\n"));
-
-    ifx_printf(("\tPVID: %d\n", \
-           ((val >> ADM_SW_PORT_PVID_SHIFT)&ifx_sw_bits[ADM_SW_PORT_PVID_BITS])));
-
-    return 0;
-}
-/*
-  initialize a VLAN
-  clear all VLAN bits
-*/
-int ifx_sw_vlan_init(int vlanid)
-{
-    ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, 0);
-
-    return 0;
-}
-
-/*
-  add a port to certain vlan
-*/
-int ifx_sw_vlan_add(int port, int vlanid)
-{
-    int reg = 0;
-
-    if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) ||
-        (vlanid > ADM_SW_MAX_VLAN_NUM))
-    {
-        ifx_printf(("Port number or VLAN number ERROR!!\n"));
-        return -1;
-    }
-    ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, &reg);
-    reg |= (1 << ifx_sw_vlan_port[port]);
-    ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
-
-    return 0;
-}
-
-/*
-  delete a given port from certain vlan
-*/
-int ifx_sw_vlan_del(int port, int vlanid)
-{
-    unsigned int reg = 0;
-
-    if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || (vlanid > ADM_SW_MAX_VLAN_NUM))
-    {
-        ifx_printf(("Port number or VLAN number ERROR!!\n"));
-        return -1;
-    }
-    ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, &reg);
-    reg &= ~(1 << ifx_sw_vlan_port[port]);
-    ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
-
-    return 0;
-}
-
-/*
-  default VLAN setting
-
-  port 0~3 as untag port and PVID = 1
-  VLAN1: port 0~3 and port 5 (MII)
-*/
-static int ifx_sw_init(void)
-{
-    ifx_printf(("Setting default ADM6996 registers... \n"));
-
-    /* MAC clone, 802.1q based VLAN */
-    ifx_sw_write(ADM_SW_VLAN_MODE, 0xff30);
-    /* auto MDIX, PVID=1, untag */
-    ifx_sw_write(ADM_SW_PORT0_CONF, 0x840f);
-    ifx_sw_write(ADM_SW_PORT1_CONF, 0x840f);
-    ifx_sw_write(ADM_SW_PORT2_CONF, 0x840f);
-    ifx_sw_write(ADM_SW_PORT3_CONF, 0x840f);
-    /* auto MDIX, PVID=2, untag */
-    ifx_sw_write(ADM_SW_PORT5_CONF, 0x880f);
-    /* port 0~3 & 5 as VLAN1 */
-    ifx_sw_write(ADM_SW_VLAN0_CONF+1, 0x0155);
-
-    return 0;
-}
-#endif
-/* 509201:linmars end */
-
-int adm_open(struct inode *node, struct file *filp)
-{
-    return 0;
-}
-
-ssize_t adm_read(struct file *filep, char *buf, size_t count, loff_t *ppos)
-{
-    return count;
-}
-
-ssize_t adm_write(struct file *filep, const char *buf, size_t count, loff_t *ppos)
-{
-    return count;
-}
-
-/* close */
-int adm_release(struct inode *inode, struct file *filp)
-{
-    return 0;
-}
-
-/* IOCTL function */
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-static long adm_ioctl(struct file *filp, unsigned int cmd, unsigned long args)
-#else
-static int adm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long args)
-#endif
-{
-    PREGRW uREGRW;
-    unsigned int rtval;
-    unsigned int val;          //6996i
-    unsigned int control[6] ;  //6996i
-    unsigned int status[6] ;   //6996i
-    
-    PMACENTRY mMACENTRY;//adm6996i
-    PPROTOCOLFILTER uPROTOCOLFILTER ;///adm6996i
-
-    if (_IOC_TYPE(cmd) != ADM_MAGIC)
-    {
-        printk("adm_ioctl: IOC_TYPE(%x) != ADM_MAGIC(%x)! \n", _IOC_TYPE(cmd), ADM_MAGIC);
-        return (-EINVAL);
-    }
-
-    if(_IOC_NR(cmd) >= KEY_IOCTL_MAX_KEY)
-    {
-        printk(KERN_WARNING "adm_ioctl: IOC_NR(%x) invalid! \n", _IOC_NR(cmd));
-        return (-EINVAL);
-    }
-
-    switch (cmd)
-    {
-        case ADM_IOCTL_REGRW:
-        {
-            uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
-            rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
-            if (rtval != 0)
-            {
-                printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
-                return (-EFAULT);
-            }
-
-            switch(uREGRW->mode)
-            {
-                case REG_READ:
-                    uREGRW->value = 0x12345678;//inl(uREGRW->addr);
-                    copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
-                    break;
-                case REG_WRITE:
-                    //outl(uREGRW->value, uREGRW->addr);
-                    break;
-
-                default:
-                    printk("No such Register Read/Write function!! \n");
-                    return (-EFAULT);
-            }
-            kfree(uREGRW);
-            break;
-        }
-
-        case ADM_SW_IOCTL_REGRW:
-        {
-            unsigned int val = 0xff;
-
-            uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
-            rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
-            if (rtval != 0)
-            {
-                printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
-                return (-EFAULT);
-            }
-
-            switch(uREGRW->mode)
-            {
-                case REG_READ:
-                    ifx_sw_read(uREGRW->addr, &val);
-                    uREGRW->value = val;
-                    copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
-                    break;
-
-                case REG_WRITE:
-                    ifx_sw_write(uREGRW->addr, uREGRW->value);
-                    break;
-                default:
-                    printk("No such Register Read/Write function!! \n");
-                    return (-EFAULT);
-            }
-            kfree(uREGRW);
-            break;
-        }
-/* 509201:linmars start */
-#if 0
-        case ADM_SW_IOCTL_PORTSTS:
-            for (rtval = 0; rtval < ADM_SW_MAX_PORT_NUM+1; rtval++)
-                ifx_check_port_status(rtval);
-            break;
-        case ADM_SW_IOCTL_INIT:
-            ifx_sw_init();
-            break;
-#endif
-/* 509201:linmars end */
-//adm6996i
-        case ADM_SW_IOCTL_MACENTRY_ADD:
-        case ADM_SW_IOCTL_MACENTRY_DEL:
-        case ADM_SW_IOCTL_MACENTRY_GET_INIT:
-        case ADM_SW_IOCTL_MACENTRY_GET_MORE:
-                
-
-           mMACENTRY = (PMACENTRY)kmalloc(sizeof(MACENTRY), GFP_KERNEL);
-            rtval = copy_from_user(mMACENTRY, (PMACENTRY)args, sizeof(MACENTRY));
-            if (rtval != 0)
-            {
-                printk("ADM_SW_IOCTL_MACENTRY: copy from user FAILED!! \n");
-                return (-EFAULT);
-            }
-           control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0]     ; 
-           control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2]      ;         
-           control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4]     ;
-           control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
-           if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
-               else    control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
-               if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {      
-                  //initial  the pointer to the first address  
-                                  val=0x8000;//busy ,status5[15]
-                                  while(val&0x8000){           //check busy ?
-                                         ifx_sw_read(0x125, &val);
-                                       }    
-                                  control[5]=0x030;//initial the first address 
-                                  ifx_sw_write(0x11f,control[5]);
-                                               
-                                       
-                                  val=0x8000;//busy ,status5[15]
-                                  while(val&0x8000){           //check busy ?
-                                         ifx_sw_read(0x125, &val);
-                                       }               
-                       
-                  }    //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)                                                              
-           if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
-               else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
-               else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) 
-                       control[5]=0x02c;//search by the mac address field
-           
-           val=0x8000;//busy ,status5[15]
-           while(val&0x8000){          //check busy ?
-                 ifx_sw_read(0x125, &val);
-               }
-               ifx_sw_write(0x11a,control[0]); 
-               ifx_sw_write(0x11b,control[1]); 
-               ifx_sw_write(0x11c,control[2]); 
-               ifx_sw_write(0x11d,control[3]); 
-               ifx_sw_write(0x11e,control[4]); 
-               ifx_sw_write(0x11f,control[5]); 
-           val=0x8000;//busy ,status5[15]
-           while(val&0x8000){          //check busy ?
-                 ifx_sw_read(0x125, &val);
-               }       
-           val=((val&0x7000)>>12);//result ,status5[14:12]
-           mMACENTRY->result=val;
-   
-           if (!val) {
-                       printk(" Command OK!! \n");
-                       if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
-                                       ifx_sw_read(0x120,&(status[0]));        
-                                       ifx_sw_read(0x121,&(status[1]));        
-                                       ifx_sw_read(0x122,&(status[2]));        
-                                       ifx_sw_read(0x123,&(status[3]));        
-                                       ifx_sw_read(0x124,&(status[4]));        
-                                       ifx_sw_read(0x125,&(status[5]));        
-               
-                                       
-                                       mMACENTRY->mac_addr[0]=(status[0]&0x00ff)       ;
-                                       mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8    ;
-                                       mMACENTRY->mac_addr[2]=(status[1]&0x00ff)    ;
-                                       mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
-                                       mMACENTRY->mac_addr[4]=(status[2]&0x00ff)    ;
-                                       mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
-                                       mMACENTRY->fid=(status[3]&0xf);
-                                       mMACENTRY->portmap=((status[3]>>4)&0x3f);
-                                       if (status[5]&0x2) {//static info_ctrl //status5[1]????
-                                               mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
-                                               mMACENTRY->info_type=1;
-                                                       }
-                                       else {//not static age_timer
-                                               mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
-                                               mMACENTRY->info_type=0;
-                                                       }
-//status5[13]????                                      mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
-                                       mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
-                                       mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
-                               }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) 
-                       
-               }
-           else if (val==0x001)  
-                printk(" All Entry Used!! \n");
-            else if (val==0x002) 
-                printk("  Entry Not Found!! \n");
-            else if (val==0x003) 
-                printk(" Try Next Entry!! \n");
-            else if (val==0x005)  
-                printk(" Command Error!! \n");   
-            else   
-                printk(" UnKnown Error!! \n");
-                
-            copy_to_user((PMACENTRY)args, mMACENTRY,sizeof(MACENTRY));    
-                
-           break;  
-        case ADM_SW_IOCTL_FILTER_ADD:
-        case ADM_SW_IOCTL_FILTER_DEL:
-        case ADM_SW_IOCTL_FILTER_GET:
-
-            uPROTOCOLFILTER = (PPROTOCOLFILTER)kmalloc(sizeof(PROTOCOLFILTER), GFP_KERNEL);
-            rtval = copy_from_user(uPROTOCOLFILTER, (PPROTOCOLFILTER)args, sizeof(PROTOCOLFILTER));
-            if (rtval != 0)
-            {
-                printk("ADM_SW_IOCTL_FILTER_ADD: copy from user FAILED!! \n");
-                return (-EFAULT);
-            }
-            
-               if(cmd==ADM_SW_IOCTL_FILTER_DEL) {      //delete filter
-                       uPROTOCOLFILTER->ip_p=00;       //delet filter
-                       uPROTOCOLFILTER->action=00;     //delete filter
-               }                                       //delete filter
-
-            ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7  
-
-               if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){    
-                       if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
-                               else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
-               }
-               else {
-                       if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
-                               else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
-               }       
-            if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7   
-                       
-            ifx_sw_read(0x95, &val);   //protocol filter action
-            if(cmd==ADM_SW_IOCTL_FILTER_GET) {
-                       uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
-                       copy_to_user((PPROTOCOLFILTER)args, uPROTOCOLFILTER, sizeof(PROTOCOLFILTER));
-               
-               }
-               else {
-                       val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
-  //                   printk("%d----\n",val);
-                       ifx_sw_write(0x95, val);        //write protocol filter action          
-               }
-               
-            break;
-//adm6996i  
-
-        /* others */
-        default:
-            return -EFAULT;
-    }
-    /* end of switch */
-    return 0;
-}
-
-/* Santosh: handle IGMP protocol filter ADD/DEL/GET */
-int adm_process_protocol_filter_request (unsigned int cmd, PPROTOCOLFILTER uPROTOCOLFILTER)
-{
-    unsigned int val;          //6996i
-
-       if(cmd==ADM_SW_IOCTL_FILTER_DEL) {      //delete filter
-       uPROTOCOLFILTER->ip_p=00;       //delet filter
-       uPROTOCOLFILTER->action=00;     //delete filter
-       }                                       //delete filter
-
-    ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7  
-
-    if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){       
-       if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
-        else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
-    }
-    else {
-       if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
-       else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
-    }  
-    if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7   
-                       
-       ifx_sw_read(0x95, &val);        //protocol filter action
-    if(cmd==ADM_SW_IOCTL_FILTER_GET) {
-               uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
-    }
-    else {
-       val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
-        ifx_sw_write(0x95, val);       //write protocol filter action          
-    }
-               
-       return 0;
-}
-
-
-/* Santosh: function for MAC ENTRY ADD/DEL/GET */
-
-int adm_process_mac_table_request (unsigned int cmd, PMACENTRY mMACENTRY)
-{
-    unsigned int val;          //6996i
-    unsigned int control[6] ;  //6996i
-    unsigned int status[6] ;   //6996i
-
-       // printk ("adm_process_mac_table_request: enter\n");   
-
-    control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0]     ; 
-    control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2]      ;         
-    control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4]     ;
-    control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
-
-    if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
-               else    control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
-               if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {      
-                 //initial  the pointer to the first address   
-                  val=0x8000;//busy ,status5[15]
-                  while(val&0x8000){           //check busy ?
-                  ifx_sw_read(0x125, &val);
-               }    
-               control[5]=0x030;//initial the first address    
-               ifx_sw_write(0x11f,control[5]);
-                                               
-                                       
-                                  val=0x8000;//busy ,status5[15]
-                                  while(val&0x8000){           //check busy ?
-                                         ifx_sw_read(0x125, &val);
-                                       }               
-                       
-                  }    //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)                                                              
-           if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
-               else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
-               else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) 
-                       control[5]=0x02c;//search by the mac address field
-           
-           val=0x8000;//busy ,status5[15]
-           while(val&0x8000){          //check busy ?
-                 ifx_sw_read(0x125, &val);
-               }
-               ifx_sw_write(0x11a,control[0]); 
-               ifx_sw_write(0x11b,control[1]); 
-               ifx_sw_write(0x11c,control[2]); 
-               ifx_sw_write(0x11d,control[3]); 
-               ifx_sw_write(0x11e,control[4]); 
-               ifx_sw_write(0x11f,control[5]); 
-           val=0x8000;//busy ,status5[15]
-           while(val&0x8000){          //check busy ?
-                 ifx_sw_read(0x125, &val);
-               }       
-           val=((val&0x7000)>>12);//result ,status5[14:12]
-           mMACENTRY->result=val;
-   
-           if (!val) {
-                       printk(" Command OK!! \n");
-                       if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
-                                       ifx_sw_read(0x120,&(status[0]));        
-                                       ifx_sw_read(0x121,&(status[1]));        
-                                       ifx_sw_read(0x122,&(status[2]));        
-                                       ifx_sw_read(0x123,&(status[3]));        
-                                       ifx_sw_read(0x124,&(status[4]));        
-                                       ifx_sw_read(0x125,&(status[5]));        
-               
-                                       
-                                       mMACENTRY->mac_addr[0]=(status[0]&0x00ff)       ;
-                                       mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8    ;
-                                       mMACENTRY->mac_addr[2]=(status[1]&0x00ff)    ;
-                                       mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
-                                       mMACENTRY->mac_addr[4]=(status[2]&0x00ff)    ;
-                                       mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
-                                       mMACENTRY->fid=(status[3]&0xf);
-                                       mMACENTRY->portmap=((status[3]>>4)&0x3f);
-                                       if (status[5]&0x2) {//static info_ctrl //status5[1]????
-                                               mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
-                                               mMACENTRY->info_type=1;
-                                                       }
-                                       else {//not static age_timer
-                                               mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
-                                               mMACENTRY->info_type=0;
-                                                       }
-//status5[13]????                                      mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
-                                       mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
-                                       mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
-                               }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) 
-                       
-               }
-           else if (val==0x001)  
-                printk(" All Entry Used!! \n");
-            else if (val==0x002) 
-                printk("  Entry Not Found!! \n");
-            else if (val==0x003) 
-                printk(" Try Next Entry!! \n");
-            else if (val==0x005)  
-                printk(" Command Error!! \n");   
-            else   
-                printk(" UnKnown Error!! \n");
-
-       // printk ("adm_process_mac_table_request: Exit\n");    
-       return 0;
-}
-
-/* Santosh: End of function for MAC ENTRY ADD/DEL*/
-struct file_operations adm_ops =
-{
-    read: adm_read,
-    write: adm_write,
-    open: adm_open,
-    release: adm_release,
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-    unlocked_ioctl: adm_ioctl
-#else
-    ioctl: adm_ioctl
-#endif
-};
-
-int adm_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-{
-    int len = 0;
-
-    len += sprintf(buf+len, " ************ Registers ************ \n");
-    *eof = 1;
-    return len;
-}
-
-int __init init_adm6996_module(void)
-{
-    unsigned int val = 000;
-    unsigned int val1 = 000;
-
-    printk("Loading ADM6996 driver... \n");
-
-    /* if running on adm5120 */
-    /* set GPIO 0~2 as adm6996 control pins */
-    //outl(0x003f3f00, 0x12000028);
-    /* enable switch port 5 (MII) as RMII mode (5120MAC <-> 6996MAC) */
-    //outl(0x18a, 0x12000030);
-    /* group adm5120 port 1 ~ 5 as VLAN0, port 5 & 6(CPU) as VLAN1 */
-    //outl(0x417e, 0x12000040);
-    /* end adm5120 fixup */
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
-    register_chrdev(69, "adm6996", &adm_ops);
-    AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x27be;
-    AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xfc;
-    adm6996_mode=adm6996i;
-    ifx_sw_read(0xa0, &val);
-    ifx_sw_read(0xa1, &val1);
-    val=((val1&0x0f)<<16)|val;
-    printk ("\nADM6996 SMI Mode-");
-    printk ("Chip ID:%5x \n ", val);
-#else    //000001.joelin
-    AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x2c50;
-    AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xff;
-
-    AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL0) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-    AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL1) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-    AMAZON_SW_REG(AMAZON_GPIO_P1_OD) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-  
-    ifx_gpio_init();
-    register_chrdev(69, "adm6996", &adm_ops);
-    mdelay(100);
-
-    /* create proc entries */
-    //  create_proc_read_entry("admide", 0, NULL, admide_proc, NULL);
-
-//joelin adm6996i support start
-    adm6996_mode=adm6996i;
-    ifx_sw_read(0xa0, &val);
-    adm6996_mode=adm6996l;
-    ifx_sw_read(0x200, &val1);
-//  printk ("\n %0x \n",val1);
-    if ((val&0xfff0)==0x1020) {
-        printk ("\n ADM6996I .. \n");
-        adm6996_mode=adm6996i; 
-    }
-    else if ((val1&0xffffff00)==0x71000) {//71010 or 71020
-        printk ("\n ADM6996LC .. \n");
-        adm6996_mode=adm6996lc;        
-    }
-    else  {
-        printk ("\n ADM6996L .. \n");
-        adm6996_mode=adm6996l; 
-    }
-#endif //ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin      
-
-    if ((adm6996_mode==adm6996lc)||(adm6996_mode==adm6996i)){
-#if 0  /* removed by MarsLin */
-        ifx_sw_write(0x29,0xc000);
-        ifx_sw_write(0x30,0x0985);
-#else
-        ifx_sw_read(0xa0, &val);
-        if (val == 0x1021) // for both 6996LC and 6996I, only AB version need the patch
-            ifx_sw_write(0x29, 0x9000);
-        ifx_sw_write(0x30,0x0985);
-#endif
-    }
-//joelin adm6996i support end
-    return 0;
-}
-
-void __exit cleanup_adm6996_module(void)
-{
-    printk("Free ADM device driver... \n");
-
-    unregister_chrdev(69, "adm6996");
-
-    /* remove proc entries */
-    //  remove_proc_entry("admide", NULL);
-}
-
-/* MarsLin, add start */
-#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
-    #define SET_BIT(reg, mask)         reg |= (mask)
-    #define CLEAR_BIT(reg, mask)       reg &= (~mask)
-    static int ifx_hw_reset(void)
-    {
-        CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL0),0x2000);
-        CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL1),0x2000);
-        SET_BIT((*AMAZON_GPIO_P0_OD),0x2000);
-        SET_BIT((*AMAZON_GPIO_P0_DIR), 0x2000);
-       CLEAR_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
-       mdelay(500);
-       SET_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
-        cleanup_adm6996_module();
-        return init_adm6996_module();
-    }
-    int (*adm6996_hw_reset)(void) = ifx_hw_reset;
-    EXPORT_SYMBOL(adm6996_hw_reset);
-    EXPORT_SYMBOL(adm6996_mode);
-    int (*adm6996_sw_read)(unsigned int addr, unsigned int *data) = ifx_sw_read;
-    EXPORT_SYMBOL(adm6996_sw_read);
-    int (*adm6996_sw_write)(unsigned int addr, unsigned int data) = ifx_sw_write;
-    EXPORT_SYMBOL(adm6996_sw_write);
-#endif
-/* MarsLin, add end */
-
-/* Santosh: for IGMP proxy/snooping, Begin */
-EXPORT_SYMBOL (adm_process_mac_table_request);
-EXPORT_SYMBOL (adm_process_protocol_filter_request);
-/* Santosh: for IGMP proxy/snooping, End */
-       
-MODULE_DESCRIPTION("ADMtek 6996 Driver");
-MODULE_AUTHOR("Joe Lin <joe.lin@infineon.com>");
-MODULE_LICENSE("GPL");
-
-module_init(init_adm6996_module);
-module_exit(cleanup_adm6996_module);
-
diff --git a/target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c b/target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c
deleted file mode 100644 (file)
index d18b439..0000000
+++ /dev/null
@@ -1,899 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- */
-//-----------------------------------------------------------------------
-/*
- * Description:
- *     Driver for Infineon Amazon 3 port switch
- */
-//-----------------------------------------------------------------------
-/* Author:     Wu Qi Ming[Qi-Ming.Wu@infineon.com]
- * Created:    7-April-2004
- */
-//-----------------------------------------------------------------------
-/* History
- * Changed on: Jun 28, 2004
- * Changed by: peng.liu@infineon.com
- * Reason:     add hardware flow control (HFC) (CONFIG_NET_HW_FLOWCONTROL)
- *
- * Changed on: Apr 6, 2005
- * Changed by: mars.lin@infineon.com
- * Reason    : supoort port identification
- */
-
-
-// copyright 2004-2005 infineon.com
-
-// copyright 2007 john crispin <blogic@openwrt.org>
-// copyright 2007 felix fietkau <nbd@openwrt.org>
-// copyright 2009 hauke mehrtens <hauke@hauke-m.de>
-
-
-// TODO
-//             port vlan code from bcrm target... the tawainese code was scrapped due to crappyness
-//             check all the mmi reg settings and possibly document them better
-//             verify the ethtool code
-//             remove the while(1) stuff
-//             further clean up and rework ... but it works for now
-//             check the mode[]=bridge stuff
-//             verify that the ethaddr can be set from u-boot
-
-
-#ifndef __KERNEL__
-#define __KERNEL__
-#endif
-
-
-#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-#define MODVERSIONS
-#endif
-
-#if defined(MODVERSIONS) && !defined(__GENKSYMS__)
-#include <linux/modversions.h>
-#endif
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/mii.h>
-#include <asm/uaccess.h>
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <linux/in6.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/ethtool.h>
-#include <asm/checksum.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/amazon_dma.h>
-#include <asm/amazon/amazon_sw.h>
-
-// how many mii ports are there ?
-#define AMAZON_SW_INT_NO 2
-
-#define ETHERNET_PACKET_DMA_BUFFER_SIZE 1536
-
-/***************************************** Module Parameters *************************************/
-static char mode[] = "bridge";
-module_param_array(mode, charp, NULL, 0);
-
-static int timeout = 1 * HZ;
-module_param(timeout, int, 0);
-
-int switch_init(struct net_device *dev);
-void switch_tx_timeout(struct net_device *dev);
-
-static struct net_device *switch_devs[2];
-
-int add_mac_table_entry(u64 entry_value)
-{
-       int i;
-       u32 data1, data2;
-
-       AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = ~7;
-
-       for (i = 0; i < 32; i++) {
-               AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | i;
-               while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
-               data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1);
-               data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
-               if ((data1 & (0x00700000)) != 0x00700000)
-                       continue;
-               AMAZON_SW_REG32(AMAZON_SW_DATA1) = (u32) (entry_value >> 32);
-               AMAZON_SW_REG32(AMAZON_SW_DATA2) = (u32) entry_value & 0xffffffff;
-               AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | i;
-               while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
-               break;
-       }
-       AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) |= 7;
-       if (i >= 32)
-               return -1;
-       return OK;
-}
-
-u64 read_mac_table_entry(int index)
-{
-       u32 data1, data2;
-       u64 value;
-       AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | index;
-       while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
-       data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1) & 0xffffff;
-       data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
-       value = (u64) data1 << 32 | (u64) data2;
-       return value;
-}
-
-int write_mac_table_entry(int index, u64 value)
-{
-       u32 data1, data2;
-       data1 = (u32) (value >> 32);
-       data2 = (u32) value & 0xffffffff;
-       AMAZON_SW_REG32(AMAZON_SW_DATA1) = data1;
-       AMAZON_SW_REG32(AMAZON_SW_DATA2) = data2;
-       AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | index;
-       while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
-       return OK;
-}
-
-u32 get_mdio_reg(int phy_addr, int reg_num)
-{
-       u32 value;
-       AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (3 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16);
-       while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
-       value = AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & 0xffff;
-       return value;
-}
-
-int set_mdio_reg(int phy_addr, int reg_num, u32 value)
-{
-       AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (2 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16) | (value & 0xffff);
-       while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
-       return OK;
-}
-
-int auto_negotiate(int phy_addr)
-{
-       u32 value = 0;
-       value = get_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG);
-       set_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG, (value | RESTART_AUTO_NEGOTIATION | AUTO_NEGOTIATION_ENABLE | PHY_RESET));
-       return OK;
-}
-
-/*
-     In this version of switch driver, we split the dma channels for the switch.
-     2 for port0 and 2 for port1. So that we can do internal bridging if necessary.
-     In switch mode, packets coming in from port0 or port1 is able to do Destination 
-     address lookup. Packets coming from port0 with destination address of port1 should 
-     not go to pmac again. The switch hardware should be able to do the switch in the hard 
-     ware level. Packets coming from the pmac should not do the DA look up in that the
-     desination is already known for the kernel. It only needs to go to the correct NIC to 
-     find its way out.
-  */
-int amazon_sw_chip_init(void)
-{
-       u32 tmp1;
-       int i = 0;
-
-       /* Aging tick select: 5mins */
-       tmp1 = 0xa0;
-       if (strcmp(mode, "bridge") == 0) {
-               // bridge mode, set militarised mode to 1, no learning!
-               tmp1 |= 0xC00;
-       } else {
-               // enable learning for P0 and P1,
-               tmp1 |= 3;
-       }
-
-       /* unknown broadcast/multicast/unicast to all ports */
-       AMAZON_SW_REG32(AMAZON_SW_UN_DEST) = 0x1ff;
-
-       AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = tmp1;
-
-       /* OCS:1 set OCS bit, split the two NIC in rx direction EDL:1 (enable DA lookup) */
-#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
-       AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x700;
-#else
-       AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x401;
-#endif
-
-       /* EPC: 1 split the two NIC in tx direction CRC is generated */
-       AMAZON_SW_REG32(AMAZON_SW_P2_CTL) = 0x6;
-
-       // for bi-directional 
-       AMAZON_SW_REG32(AMAZON_SW_P0_WM) = 0x14141412;
-       AMAZON_SW_REG32(AMAZON_SW_P1_WM) = 0x14141412;
-       AMAZON_SW_REG32(AMAZON_SW_P2_WM) = 0x28282826;
-       AMAZON_SW_REG32(AMAZON_SW_GBL_WM) = 0x0;
-
-       AMAZON_SW_REG32(AMAZON_CGU_PLL0SR) = (AMAZON_SW_REG32(AMAZON_CGU_PLL0SR)) | 0x58000000;
-       // clock for PHY
-       AMAZON_SW_REG32(AMAZON_CGU_IFCCR) =     (AMAZON_SW_REG32(AMAZON_CGU_IFCCR)) | 0x80000004;
-       // enable power for PHY
-       AMAZON_SW_REG32(AMAZON_PMU_PWDCR) = (AMAZON_SW_REG32(AMAZON_PMU_PWDCR)) | AMAZON_PMU_PWDCR_EPHY;
-       // set reverse MII, enable MDIO statemachine
-       AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG) = 0x800027bf;
-       while (1)
-               if (((AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG)) & 0x80000000) == 0)
-                       break;
-       AMAZON_SW_REG32(AMAZON_SW_EPHY) = 0xff;
-
-       // auto negotiation
-       AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = 0x83e08000;
-       auto_negotiate(0x1f);
-
-       /* enable all ports */
-       AMAZON_SW_REG32(AMAZON_SW_PS_CTL) = 0x7;
-       for (i = 0; i < 32; i++)
-               write_mac_table_entry(i, 1 << 50);
-       return 0;
-}
-
-static unsigned char my_ethaddr[MAX_ADDR_LEN];
-/* need to get the ether addr from u-boot */
-static int __init ethaddr_setup(char *line)
-{
-       char *ep;
-       int i;
-
-       memset(my_ethaddr, 0, MAX_ADDR_LEN);
-       for (i = 0; i < 6; i++) {
-               my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0;
-               if (line)
-                       line = (*ep) ? ep + 1 : ep;
-       }
-       printk(KERN_INFO "amazon_mii0: mac address %2x-%2x-%2x-%2x-%2x-%2x \n", my_ethaddr[0], my_ethaddr[1], my_ethaddr[2], my_ethaddr[3], my_ethaddr[4], my_ethaddr[5]);
-       return 0;
-}
-
-__setup("ethaddr=", ethaddr_setup);
-
-static void open_rx_dma(struct net_device *dev)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       struct dma_device_info *dma_dev = priv->dma_device;
-       int i;
-
-       for (i = 0; i < dma_dev->num_rx_chan; i++)
-               dma_dev->rx_chan[i].control = 1;
-       dma_device_update_rx(dma_dev);
-}
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-static void close_rx_dma(struct net_device *dev)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       struct dma_device_info *dma_dev = priv->dma_device;
-       int i;
-
-       for (i = 0; i < dma_dev->num_rx_chan; i++)
-               dma_dev->rx_chan[i].control = 0;
-       dma_device_update_rx(dma_dev);
-}
-
-void amazon_xon(struct net_device *dev)
-{
-       unsigned long flag;
-       local_irq_save(flag);
-       open_rx_dma(dev);
-       local_irq_restore(flag);
-}
-#endif
-
-int switch_open(struct net_device *dev)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       if (!strcmp(dev->name, "eth1")) {
-               priv->mdio_phy_addr = PHY0_ADDR;
-       }
-       open_rx_dma(dev);                       
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-       if ((priv->fc_bit = netdev_register_fc(dev, amazon_xon)) == 0) {
-               printk(KERN_WARNING "amazon_mii0: Hardware Flow Control register fails\n");
-       }
-#endif
-
-       netif_start_queue(dev);
-       return OK;
-}
-
-int switch_release(struct net_device *dev)
-{
-       int i;
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       struct dma_device_info *dma_dev = priv->dma_device;
-
-       for (i = 0; i < dma_dev->num_tx_chan; i++)
-               dma_dev->tx_chan[i].control = 0;
-       for (i = 0; i < dma_dev->num_rx_chan; i++)
-               dma_dev->rx_chan[i].control = 0;
-
-       dma_device_update(dma_dev);
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-       if (priv->fc_bit) {
-               netdev_unregister_fc(priv->fc_bit);
-       }
-#endif
-       netif_stop_queue(dev);
-
-       return OK;
-}
-
-
-void switch_rx(struct net_device *dev, int len, struct sk_buff *skb)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-       int mit_sel = 0;
-#endif
-       skb->dev = dev;
-       skb->protocol = eth_type_trans(skb, dev);
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-       mit_sel = netif_rx(skb);
-       switch (mit_sel) {
-       case NET_RX_SUCCESS:
-       case NET_RX_CN_LOW:
-       case NET_RX_CN_MOD:
-               break;
-       case NET_RX_CN_HIGH:
-               break;
-       case NET_RX_DROP:
-               if ((priv->fc_bit)
-                       && (!test_and_set_bit(priv->fc_bit, &netdev_fc_xoff))) {
-                       close_rx_dma(dev);
-               }
-               break;
-       }
-#else
-       netif_rx(skb);
-#endif
-       priv->stats.rx_packets++;
-       priv->stats.rx_bytes += len;
-       return;
-}
-
-int asmlinkage switch_hw_tx(char *buf, int len, struct net_device *dev)
-{
-       struct switch_priv *priv = netdev_priv(dev);
-       struct dma_device_info *dma_dev = priv->dma_device;
-
-       dma_dev->current_tx_chan = 0;
-       return dma_device_write(dma_dev, buf, len, priv->skb);
-}
-
-int asmlinkage switch_tx(struct sk_buff *skb, struct net_device *dev)
-{
-       int len;
-       char *data;
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-
-       len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-       data = skb->data;
-       priv->skb = skb;
-       dev->trans_start = jiffies;
-
-       if (switch_hw_tx(data, len, dev) != len) {
-               dev_kfree_skb_any(skb);
-               return OK;
-       }
-
-       priv->stats.tx_packets++;
-       priv->stats.tx_bytes += len;
-       return OK;
-}
-
-void switch_tx_timeout(struct net_device *dev)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       priv->stats.tx_errors++;
-       netif_wake_queue(dev);
-       return;
-}
-
-void negotiate(struct net_device *dev)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       unsigned short data = get_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG);
-
-       data &= ~(MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD);
-
-       switch (priv->current_speed_selection) {
-       case 10:
-               if (priv->current_duplex == full)
-                       data |= MDIO_ADVERT_10_FD;
-               else if (priv->current_duplex == half)
-                       data |= MDIO_ADVERT_10_HD;
-               else
-                       data |= MDIO_ADVERT_10_HD | MDIO_ADVERT_10_FD;
-               break;
-
-       case 100:
-               if (priv->current_duplex == full)
-                       data |= MDIO_ADVERT_100_FD;
-               else if (priv->current_duplex == half)
-                       data |= MDIO_ADVERT_100_HD;
-               else
-                       data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD;
-               break;
-
-       case 0:                                 /* Auto */
-               if (priv->current_duplex == full)
-                       data |= MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD;
-               else if (priv->current_duplex == half)
-                       data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_10_HD;
-               else
-                       data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD     | MDIO_ADVERT_10_HD;
-               break;
-
-       default:                                        /* assume autoneg speed and duplex */
-               data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
-       }
-
-       set_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG, data);
-
-       /* Renegotiate with link partner */
-
-       data = get_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG);
-       data |= MDIO_BC_NEGOTIATE;
-
-       set_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG, data);
-
-}
-
-
-void set_duplex(struct net_device *dev, enum duplex new_duplex)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       if (new_duplex != priv->current_duplex) {
-               priv->current_duplex = new_duplex;
-               negotiate(dev);
-       }
-}
-
-void set_speed(struct net_device *dev, unsigned long speed)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       priv->current_speed_selection = speed;
-       negotiate(dev);
-}
-
-static int switch_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       struct ethtool_cmd ecmd;
-
-       if (copy_from_user(&ecmd, ifr->ifr_data, sizeof(ecmd)))
-               return -EFAULT;
-
-       switch (ecmd.cmd) {
-       case ETHTOOL_GSET:
-               memset((void *) &ecmd, 0, sizeof(ecmd));
-               ecmd.supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |     SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-                                               SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
-               ecmd.port = PORT_TP;
-               ecmd.transceiver = XCVR_EXTERNAL;
-               ecmd.phy_address = priv->mdio_phy_addr;
-
-               ecmd.speed = priv->current_speed;
-
-               ecmd.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-
-               ecmd.advertising = ADVERTISED_TP;
-               if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
-                       ecmd.advertising |= ADVERTISED_Autoneg;
-               else {
-                       ecmd.advertising |=     ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
-                               ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
-                       if (priv->current_speed_selection == 10)
-                               ecmd.advertising &=     ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full);
-                       else if (priv->current_speed_selection == 100)
-                               ecmd.advertising &=     ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full);
-                       if (priv->current_duplex == half)
-                               ecmd.advertising &=     ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full);
-                       else if (priv->current_duplex == full)
-                               ecmd.advertising &=     ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half);
-               }
-               ecmd.autoneg = AUTONEG_ENABLE;
-               if (copy_to_user(ifr->ifr_data, &ecmd, sizeof(ecmd)))
-                       return -EFAULT;
-               break;
-
-       case ETHTOOL_SSET:
-               if (!capable(CAP_NET_ADMIN)) {
-                       return -EPERM;
-               }
-               if (ecmd.autoneg == AUTONEG_ENABLE) {
-                       set_duplex(dev, autoneg);
-                       set_speed(dev, 0);
-               } else {
-                       set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full);
-                       set_speed(dev, ecmd.speed == SPEED_10 ? 10 : 100);
-               }
-               break;
-
-       case ETHTOOL_GDRVINFO:
-               {
-                       struct ethtool_drvinfo info;
-                       memset((void *) &info, 0, sizeof(info));
-                       strncpy(info.driver, "AMAZONE", sizeof(info.driver) - 1);
-                       strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1);
-                       strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1);
-                       info.regdump_len = 0;
-                       info.eedump_len = 0;
-                       info.testinfo_len = 0;
-                       if (copy_to_user(ifr->ifr_data, &info, sizeof(info)))
-                               return -EFAULT;
-               }
-               break;
-       case ETHTOOL_NWAY_RST:
-               if (priv->current_duplex == autoneg     && priv->current_speed_selection == 0)
-                       negotiate(dev);
-               break;
-       default:
-               return -EOPNOTSUPP;
-               break;
-       }
-       return 0;
-}
-
-
-
-int mac_table_tools_ioctl(struct net_device *dev, struct mac_table_req *req)
-{
-       int cmd;
-       int i;
-       cmd = req->cmd;
-       switch (cmd) {
-       case RESET_MAC_TABLE:
-               for (i = 0; i < 32; i++) {
-                       write_mac_table_entry(i, 0);
-               }
-               break;
-       case READ_MAC_ENTRY:
-               req->entry_value = read_mac_table_entry(req->index);
-               break;
-       case WRITE_MAC_ENTRY:
-               write_mac_table_entry(req->index, req->entry_value);
-               break;
-       case ADD_MAC_ENTRY:
-               add_mac_table_entry(req->entry_value);
-               break;
-       default:
-               return -EINVAL;
-       }
-
-       return 0;
-}
-
-
-/*
-    the ioctl for the switch driver is developed in the conventional way
-    the control type falls into some basic categories, among them, the 
-    SIOCETHTOOL is the traditional eth interface. VLAN_TOOLS and  
-    MAC_TABLE_TOOLS are designed specifically for amazon chip. User 
-    should be aware of the data structures used in these interfaces. 
-*/
-int switch_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-       struct data_req *switch_data_req = (struct data_req *) ifr->ifr_data;
-       struct mac_table_req *switch_mac_table_req;
-       switch (cmd) {
-       case SIOCETHTOOL:
-               switch_ethtool_ioctl(dev, ifr);
-               break;
-       case SIOCGMIIPHY:                       /* Get PHY address */
-               break;
-       case SIOCGMIIREG:                       /* Read MII register */
-               break;
-       case SIOCSMIIREG:                       /* Write MII register */
-               break;
-       case SET_ETH_SPEED_10:          /* 10 Mbps */
-               break;
-       case SET_ETH_SPEED_100: /* 100 Mbps */
-               break;
-       case SET_ETH_SPEED_AUTO:        /* Auto negotiate speed */
-               break;
-       case SET_ETH_DUPLEX_HALF:       /* Half duplex. */
-               break;
-       case SET_ETH_DUPLEX_FULL:       /* Full duplex. */
-               break;
-       case SET_ETH_DUPLEX_AUTO:       /* Autonegotiate duplex */
-               break;
-       case SET_ETH_REG:
-               AMAZON_SW_REG32(switch_data_req->index) = switch_data_req->value;
-               break;
-       case MAC_TABLE_TOOLS:
-               switch_mac_table_req = (struct mac_table_req *) ifr->ifr_data;
-               mac_table_tools_ioctl(dev, switch_mac_table_req);
-               break;
-       default:
-               return -EINVAL;
-       }
-
-       return 0;
-}
-
-struct net_device_stats *switch_stats(struct net_device *dev)
-{
-       struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-       return &priv->stats;
-}
-
-int switch_change_mtu(struct net_device *dev, int new_mtu)
-{
-       if (new_mtu >= 1516)
-               new_mtu = 1516;
-       dev->mtu = new_mtu;
-       return 0;
-}
-
-int switch_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
-{
-       u8 *buf = NULL;
-       int len = 0;
-       struct sk_buff *skb = NULL;
-
-       len = dma_device_read(dma_dev, &buf, (void **) &skb);
-
-       if (len >= 0x600) {
-               printk(KERN_WARNING "amazon_mii0: packet too large %d\n", len);
-               goto switch_hw_receive_err_exit;
-       }
-
-       /* remove CRC */
-       len -= 4;
-       if (skb == NULL) {
-               printk(KERN_WARNING "amazon_mii0: cannot restore pointer\n");
-               goto switch_hw_receive_err_exit;
-       }
-       if (len > (skb->end - skb->tail)) {
-               printk(KERN_WARNING "amazon_mii0: BUG, len:%d end:%p tail:%p\n", (len + 4), skb->end, skb->tail);
-               goto switch_hw_receive_err_exit;
-       }
-       skb_put(skb, len);
-       skb->dev = dev;
-       switch_rx(dev, len, skb);
-       return OK;
-  
-  switch_hw_receive_err_exit:
-       if (skb)
-               dev_kfree_skb_any(skb);
-       return -EIO;
-}
-
-int dma_intr_handler(struct dma_device_info *dma_dev, int status)
-{
-       struct net_device *dev;
-
-       dev = dma_dev->priv;
-       switch (status) {
-       case RCV_INT:
-               switch_hw_receive(dev, dma_dev);
-               break;
-       case TX_BUF_FULL_INT:
-               netif_stop_queue(dev);
-               break;
-       case TRANSMIT_CPT_INT:
-               netif_wake_queue(dev);
-               break;
-       }
-       return OK;
-}
-
-/* reserve 2 bytes in front of data pointer*/
-u8 *dma_buffer_alloc(int len, int *byte_offset, void **opt)
-{
-       u8 *buffer = NULL;
-       struct sk_buff *skb = NULL;
-       skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
-       if (skb == NULL) {
-               return NULL;
-       }
-       buffer = (u8 *) (skb->data);
-       skb_reserve(skb, 2);
-       *(int *) opt = (int) skb;
-       *byte_offset = 2;
-       return buffer;
-}
-
-int dma_buffer_free(u8 * dataptr, void *opt)
-{
-       struct sk_buff *skb = NULL;
-       if (opt == NULL) {
-               kfree(dataptr);
-       } else {
-               skb = (struct sk_buff *) opt;
-               dev_kfree_skb_any(skb);
-       }
-       return OK;
-}
-
-int init_dma_device(_dma_device_info * dma_dev, struct net_device *dev)
-{
-       int i;
-       int num_tx_chan, num_rx_chan;
-       if (strcmp(dma_dev->device_name, "switch1") == 0) {
-               num_tx_chan = 1;
-               num_rx_chan = 2;
-       } else {
-               num_tx_chan = 1;
-               num_rx_chan = 2;
-       }
-       dma_dev->priv = dev;
-
-       dma_dev->weight = 1;
-       dma_dev->num_tx_chan = num_tx_chan;
-       dma_dev->num_rx_chan = num_rx_chan;
-       dma_dev->ack = 1;
-       dma_dev->tx_burst_len = 4;
-       dma_dev->rx_burst_len = 4;
-       for (i = 0; i < dma_dev->num_tx_chan; i++) {
-               dma_dev->tx_chan[i].weight = QOS_DEFAULT_WGT;
-               dma_dev->tx_chan[i].desc_num = 10;
-               dma_dev->tx_chan[i].packet_size = 0;
-               dma_dev->tx_chan[i].control = 0;
-       }
-       for (i = 0; i < num_rx_chan; i++) {
-               dma_dev->rx_chan[i].weight = QOS_DEFAULT_WGT;
-               dma_dev->rx_chan[i].desc_num = 10;
-               dma_dev->rx_chan[i].packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
-               dma_dev->rx_chan[i].control = 0;
-       }
-       dma_dev->intr_handler = dma_intr_handler;
-       dma_dev->buffer_alloc = dma_buffer_alloc;
-       dma_dev->buffer_free = dma_buffer_free;
-       return 0;
-}
-
-int switch_set_mac_address(struct net_device *dev, void *p)
-{
-       struct sockaddr *addr = p;
-       memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-       return OK;
-}
-
-static const struct net_device_ops amazon_mii_ops = {
-       .ndo_init               = switch_init,
-       .ndo_open               = switch_open,
-       .ndo_stop               = switch_release,
-       .ndo_start_xmit         = switch_tx,
-       .ndo_do_ioctl           = switch_ioctl,
-       .ndo_get_stats          = switch_stats,
-       .ndo_change_mtu         = switch_change_mtu,
-       .ndo_set_mac_address            = switch_set_mac_address,
-       .ndo_tx_timeout         = switch_tx_timeout,
-};
-
-int switch_init(struct net_device *dev)
-{
-       u64 retval = 0;
-       int i;
-       int result;
-       struct switch_priv *priv;
-       ether_setup(dev);                       /* assign some of the fields */
-       printk(KERN_INFO "amazon_mii0: %s up using ", dev->name);
-       dev->watchdog_timeo = timeout;
-
-       priv = netdev_priv(dev);
-       priv->dma_device = (struct dma_device_info *) kmalloc(sizeof(struct dma_device_info), GFP_KERNEL);
-       if (priv->num == 0) {
-               sprintf(priv->dma_device->device_name, "switch1");
-       } else if (priv->num == 1) {
-               sprintf(priv->dma_device->device_name, "switch2");
-       }
-       printk("\"%s\"\n", priv->dma_device->device_name);
-       init_dma_device(priv->dma_device, dev);
-       result = dma_device_register(priv->dma_device);
-
-       /* read the mac address from the mac table and put them into the mac table. */
-       for (i = 0; i < 6; i++) {
-               retval += my_ethaddr[i];
-       }
-       /* ethaddr not set in u-boot ? */
-       if (retval == 0) {
-               dev->dev_addr[0] = 0x00;
-               dev->dev_addr[1] = 0x20;
-               dev->dev_addr[2] = 0xda;
-               dev->dev_addr[3] = 0x86;
-               dev->dev_addr[4] = 0x23;
-               dev->dev_addr[5] = 0x74 + (unsigned char) priv->num;
-       } else {
-               for (i = 0; i < 6; i++) {
-                       dev->dev_addr[i] = my_ethaddr[i];
-               }
-               dev->dev_addr[5] += +(unsigned char) priv->num;
-       }
-       return OK;
-}
-
-static int amazon_mii_probe(struct platform_device *dev)
-{
-       int i = 0, result, device_present = 0;
-       struct switch_priv *priv;
-
-       for (i = 0; i < AMAZON_SW_INT_NO; i++) {
-               switch_devs[i] = alloc_etherdev(sizeof(struct switch_priv));
-               switch_devs[i]->netdev_ops = &amazon_mii_ops;
-               strcpy(switch_devs[i]->name, "eth%d");
-               priv = (struct switch_priv *) netdev_priv(switch_devs[i]);
-               priv->num = i;
-               if ((result = register_netdev(switch_devs[i])))
-                       printk(KERN_WARNING "amazon_mii0: error %i registering device \"%s\"\n", result, switch_devs[i]->name);
-               else
-                       device_present++;
-       }
-       amazon_sw_chip_init();
-       return device_present ? 0 : -ENODEV;
-}
-
-static int amazon_mii_remove(struct platform_device *dev)
-{
-       int i;
-       struct switch_priv *priv;
-       for (i = 0; i < AMAZON_SW_INT_NO; i++) {
-               priv = netdev_priv(switch_devs[i]);
-               if (priv->dma_device) {
-                       dma_device_unregister(priv->dma_device);
-                       kfree(priv->dma_device);
-               }
-               kfree(netdev_priv(switch_devs[i]));
-               unregister_netdev(switch_devs[i]);
-       }
-       return 0;
-}
-
-static struct platform_driver amazon_mii_driver = {
-       .probe = amazon_mii_probe,
-       .remove = amazon_mii_remove,
-       .driver = {
-               .name = "amazon_mii0",
-               .owner = THIS_MODULE,
-       },
-};
-
-static int __init amazon_mii_init(void)
-{
-       int ret = platform_driver_register(&amazon_mii_driver);
-       if (ret)
-               printk(KERN_WARNING "amazon_mii0: Error registering platfom driver!\n");
-       return ret;
-}
-
-static void __exit amazon_mii_cleanup(void)
-{
-       platform_driver_unregister(&amazon_mii_driver);
-}
-
-module_init(amazon_mii_init);
-module_exit(amazon_mii_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Wu Qi Ming");
-MODULE_DESCRIPTION("ethernet driver for AMAZON boards");
-
diff --git a/target/linux/amazon/files/drivers/tty/serial/amazon_asc.c b/target/linux/amazon/files/drivers/tty/serial/amazon_asc.c
deleted file mode 100644 (file)
index bb2dd72..0000000
+++ /dev/null
@@ -1,711 +0,0 @@
-/*
- *  Driver for AMAZONASC serial ports
- *
- *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *  Based on drivers/serial/serial_s3c2400.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Copyright (C) 2004 Infineon IFAP DC COM CPE
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/serial.h>
-
-#define PORT_AMAZONASC  111
-
-#include <linux/serial_core.h>
-
-#define UART_NR                1
-
-#define UART_DUMMY_UER_RX 1
-
-#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR
-#define CALLOUT_AMAZONASC_MAJOR        TTYAUX_MAJOR
-#define SERIAL_AMAZONASC_MINOR 64
-#define SERIAL_AMAZONASC_NR    UART_NR
-
-static void amazonasc_tx_chars(struct uart_port *port);
-static struct uart_port amazonasc_ports[UART_NR];
-static struct uart_driver amazonasc_reg;
-static unsigned int uartclk = 0;
-
-static void amazonasc_stop_tx(struct uart_port *port)
-{
-       /* fifo underrun shuts up after firing once */
-       return;
-}
-
-static void amazonasc_start_tx(struct uart_port *port)
-{
-       unsigned long flags;
-
-       local_irq_save(flags);
-       amazonasc_tx_chars(port);
-       local_irq_restore(flags);
-
-       return;
-}
-
-static void amazonasc_stop_rx(struct uart_port *port)
-{
-       /* clear the RX enable bit */
-       amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON);
-}
-
-static void amazonasc_enable_ms(struct uart_port *port)
-{
-       /* no modem signals */
-       return;
-}
-
-#include <linux/version.h>
-
-static void
-amazonasc_rx_chars(struct uart_port *port)
-{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
-       struct tty_struct *tty = port->state->port.tty;
-#else
-       struct tty_struct *tty = port->info->port.tty;
-#endif
-       unsigned int ch = 0, rsr = 0, fifocnt;
-
-       fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
-       while (fifocnt--)
-       {
-               u8 flag = TTY_NORMAL;
-               ch = amazon_readl(AMAZON_ASC_RBUF);
-               rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX;
-               tty_flip_buffer_push(tty);
-               port->icount.rx++;
-
-               /*
-                * Note that the error handling code is
-                * out of the main execution path
-                */
-               if (rsr & ASCCON_ANY) {
-                       if (rsr & ASCCON_PE) {
-                               port->icount.parity++;
-                               amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE);
-                       } else if (rsr & ASCCON_FE) {
-                               port->icount.frame++;
-                               amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE);
-                       }
-                       if (rsr & ASCCON_OE) {
-                               port->icount.overrun++;
-                               amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE);
-                       }
-
-                       rsr &= port->read_status_mask;
-
-                       if (rsr & ASCCON_PE)
-                               flag = TTY_PARITY;
-                       else if (rsr & ASCCON_FE)
-                               flag = TTY_FRAME;
-               }
-
-               if ((rsr & port->ignore_status_mask) == 0)
-                       tty_insert_flip_char(tty, ch, flag);
-
-               if (rsr & ASCCON_OE)
-                       /*
-                        * Overrun is special, since it's reported
-                        * immediately, and doesn't affect the current
-                        * character
-                        */
-                       tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-       }
-       if (ch != 0)
-               tty_flip_buffer_push(tty);
-
-       return;
-}
-
-
-static void amazonasc_tx_chars(struct uart_port *port)
-{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
-       struct circ_buf *xmit = &port->state->xmit;
-#else
-       struct circ_buf *xmit = &port->info->xmit;
-#endif
-
-       if (uart_tx_stopped(port)) {
-               amazonasc_stop_tx(port);
-               return;
-       }
-       
-       while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
-                       >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL)
-       {
-               if (port->x_char) {
-                       amazon_writel(port->x_char, AMAZON_ASC_TBUF);
-                       port->icount.tx++;
-                       port->x_char = 0;
-                       continue;
-               }
-
-               if (uart_circ_empty(xmit))
-                       break;
-
-               amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               port->icount.tx++;
-       }
-
-       if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-               uart_write_wakeup(port);
-}
-
-static irqreturn_t amazonasc_tx_int(int irq, void *port)
-{
-       amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1);
-       amazonasc_start_tx(port);
-
-       /* clear any pending interrupts */
-       amazon_writel_masked(AMAZON_ASC_WHBCON, 
-                       (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), 
-                       (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
-
-       return IRQ_HANDLED;
-}
-
-static irqreturn_t amazonasc_er_int(int irq, void *port)
-{
-       /* clear any pending interrupts */
-       amazon_writel_masked(AMAZON_ASC_WHBCON, 
-                       (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), 
-                       (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
-       
-       return IRQ_HANDLED;
-}
-
-static irqreturn_t amazonasc_rx_int(int irq, void *port)
-{
-       amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1);
-       amazonasc_rx_chars((struct uart_port *) port);
-       return IRQ_HANDLED;
-}
-
-static u_int amazonasc_tx_empty(struct uart_port *port)
-{
-       int status;
-
-       /*
-        * FSTAT tells exactly how many bytes are in the FIFO.
-        * The question is whether we really need to wait for all
-        * 16 bytes to be transmitted before reporting that the
-        * transmitter is empty.
-        */
-       status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
-       return status ? 0 : TIOCSER_TEMT;
-}
-
-static u_int amazonasc_get_mctrl(struct uart_port *port)
-{
-       /* no modem control signals - the readme says to pretend all are set */
-       return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR;
-}
-
-static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-       /* no modem control - just return */
-       return;
-}
-
-static void amazonasc_break_ctl(struct uart_port *port, int break_state)
-{
-       /* no way to send a break */
-       return;
-}
-
-static int amazonasc_startup(struct uart_port *port)
-{
-       unsigned int con = 0;
-       unsigned long flags;
-       int retval;
-
-       /* this assumes: CON.BRS = CON.FDE = 0 */
-       if (uartclk == 0)
-               uartclk = amazon_get_fpi_hz();
-
-       amazonasc_ports[0].uartclk = uartclk;
-
-       local_irq_save(flags);
-
-       /* this setup was probably already done in u-boot */
-       /* ASC and GPIO Port 1 bits 3 and 4 share the same pins
-        * P1.3 (RX) in, Alternate 10
-        * P1.4 (TX) in, Alternate 10
-        */
-        amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10);  //P1.4 output, P1.3 input
-        amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18);              //ALTSETL0 11
-        amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0);         //ALTSETL1 00
-        amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10);
-       
-       /* set up the CLC */
-       amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0);
-       amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET);
-       
-       /* asynchronous mode */
-       con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN;
-       
-       /* choose the line - there's only one */
-       amazon_writel(0, AMAZON_ASC_PISEL);
-       amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, 
-               AMAZON_ASC_TXFCON);
-       amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, 
-               AMAZON_ASC_RXFCON);
-       wmb();
-       
-       amazon_writel_masked(AMAZON_ASC_CON, con, con);
-
-       retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port);
-       if (retval){
-               printk("failed to request amazonasc_rx_int\n");
-               return retval;
-       }
-       retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port);
-       if (retval){
-               printk("failed to request amazonasc_tx_int\n");
-               goto err1;
-       }
-
-       retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port);
-       if (retval){
-               printk("failed to request amazonasc_er_int\n");
-               goto err2;
-       }
-       
-       local_irq_restore(flags);
-       return 0;
-
-err2:
-       free_irq(AMAZONASC_TIR, port);
-       
-err1:
-       free_irq(AMAZONASC_RIR, port);
-       local_irq_restore(flags);
-       return retval;
-}
-
-static void amazonasc_shutdown(struct uart_port *port)
-{
-       free_irq(AMAZONASC_RIR, port);
-       free_irq(AMAZONASC_TIR, port);
-       free_irq(AMAZONASC_EIR, port);
-       /*
-        * disable the baudrate generator to disable the ASC
-        */
-       amazon_writel(0, AMAZON_ASC_CON);
-
-       /* flush and then disable the fifos */
-       amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU);
-       amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0);
-       amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU);
-       amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0);
-}
-
-static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
-{
-       unsigned int cflag;
-       unsigned int iflag;
-       unsigned int baud, quot;
-       unsigned int con = 0;
-       unsigned long flags;
-
-       cflag = new->c_cflag;
-       iflag = new->c_iflag;
-
-       /* byte size and parity */
-       switch (cflag & CSIZE) {
-       /* 7 bits are always with parity */
-       case CS7: con = ASCCON_M_7ASYNCPAR; break;
-       /* the ASC only suports 7 and 8 bits */
-       case CS5:
-       case CS6:
-       default:
-               if (cflag & PARENB)
-                       con = ASCCON_M_8ASYNCPAR;
-               else
-                       con = ASCCON_M_8ASYNC;
-               break;
-       }
-       if (cflag & CSTOPB)
-               con |= ASCCON_STP;
-       if (cflag & PARENB) {
-               if (!(cflag & PARODD))
-                       con &= ~ASCCON_ODD;
-               else
-                       con |= ASCCON_ODD;
-       }
-
-       port->read_status_mask = ASCCON_OE;
-       if (iflag & INPCK)
-               port->read_status_mask |= ASCCON_FE | ASCCON_PE;
-       
-       port->ignore_status_mask = 0;
-       if (iflag & IGNPAR)
-               port->ignore_status_mask |= ASCCON_FE | ASCCON_PE;
-       
-       if (iflag & IGNBRK) {
-               /*
-                * If we're ignoring parity and break indicators,
-                * ignore overruns too (for real raw support).
-                */
-               if (iflag & IGNPAR)
-                       port->ignore_status_mask |= ASCCON_OE;
-       }
-
-       /*
-        * Ignore all characters if CREAD is not set.
-        */
-       if ((cflag & CREAD) == 0)
-               port->ignore_status_mask |= UART_DUMMY_UER_RX;
-
-       /* set error signals  - framing, parity  and overrun */
-       con |= ASCCON_FEN;
-       con |= ASCCON_OEN;
-       con |= ASCCON_PEN;
-       /* enable the receiver */
-       con |= ASCCON_REN;
-
-       /* block the IRQs */
-       local_irq_save(flags);
-
-       /* set up CON */
-       amazon_writel(con, AMAZON_ASC_CON);
-
-       /* Set baud rate - take a divider of 2 into account */
-    baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       quot = quot/2 - 1;
-
-       /* the next 3 probably already happened when we set CON above */
-       /* disable the baudrate generator */
-       amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0);
-       /* make sure the fractional divider is off */
-       amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0);
-       /* set up to use divisor of 2 */
-       amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0);
-       /* now we can write the new baudrate into the register */
-       amazon_writel(quot, AMAZON_ASC_BTR);
-       /* turn the baudrate generator back on */
-       amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R);
-
-       local_irq_restore(flags);
-}
-
-static const char *amazonasc_type(struct uart_port *port)
-{
-       return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'
- */
-static void amazonasc_release_port(struct uart_port *port)
-{
-       return;
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int amazonasc_request_port(struct uart_port *port)
-{
-       return 0;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void amazonasc_config_port(struct uart_port *port, int flags)
-{
-       if (flags & UART_CONFIG_TYPE) {
-               port->type = PORT_AMAZONASC;
-               amazonasc_request_port(port);
-       }
-}
-
-/*
- * verify the new serial_struct (for TIOCSSERIAL).
- */
-static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-       int ret = 0;
-       if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC)
-               ret = -EINVAL;
-       if (ser->irq < 0 || ser->irq >= NR_IRQS)
-               ret = -EINVAL;
-       if (ser->baud_base < 9600)
-               ret = -EINVAL;
-       return ret;
-}
-
-static struct uart_ops amazonasc_pops = {
-       .tx_empty =             amazonasc_tx_empty,
-       .set_mctrl =    amazonasc_set_mctrl,
-       .get_mctrl =    amazonasc_get_mctrl,
-       .stop_tx =              amazonasc_stop_tx,
-       .start_tx =             amazonasc_start_tx,
-       .stop_rx =              amazonasc_stop_rx,
-       .enable_ms =    amazonasc_enable_ms,
-       .break_ctl =    amazonasc_break_ctl,
-       .startup =              amazonasc_startup,
-       .shutdown =             amazonasc_shutdown,
-       .set_termios =  amazonasc_set_termios,
-       .type =                 amazonasc_type,
-       .release_port = amazonasc_release_port,
-       .request_port = amazonasc_request_port,
-       .config_port =  amazonasc_config_port,
-       .verify_port =  amazonasc_verify_port,
-};
-
-static struct uart_port amazonasc_ports[UART_NR] = {
-       {
-               membase:        (void *)AMAZON_ASC,
-               mapbase:        AMAZON_ASC,
-               iotype:         SERIAL_IO_MEM,
-               irq:            AMAZONASC_RIR, /* RIR */
-               uartclk:        0, /* filled in dynamically */
-               fifosize:       16,
-               unused:         { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */
-               type:           PORT_AMAZONASC,
-               ops:            &amazonasc_pops,
-               flags:          ASYNC_BOOT_AUTOCONF,
-       },
-};
-
-static void amazonasc_console_write(struct console *co, const char *s, u_int count)
-{
-       int i, fifocnt;
-       unsigned long flags;
-       local_irq_save(flags);
-       for (i = 0; i < count;)
-       {
-               /* wait until the FIFO is not full */
-               do
-               {
-                       fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
-                                       >> ASCFSTAT_TXFFLOFF;
-               } while (fifocnt == AMAZONASC_TXFIFO_FULL);
-               if (s[i] == '\0')
-               {
-                       break;
-               }
-               if (s[i] == '\n')
-               {
-                       amazon_writel('\r', AMAZON_ASC_TBUF);
-                       do
-                       {
-                               fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) &
-                               ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF;
-                       } while (fifocnt == AMAZONASC_TXFIFO_FULL);
-               }
-               amazon_writel(s[i], AMAZON_ASC_TBUF);
-               i++;
-       } 
-
-       local_irq_restore(flags);
-}
-
-static void __init
-amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-{
-       u_int lcr_h;
-
-       lcr_h = amazon_readl(AMAZON_ASC_CON);
-       /* do this only if the ASC is turned on */
-       if (lcr_h & ASCCON_R) {
-               u_int quot, div, fdiv, frac;
-
-               *parity = 'n';
-               if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR ||
-                           (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) {
-                       if (lcr_h & ASCCON_ODD)
-                               *parity = 'o';
-                       else
-                               *parity = 'e';
-               }
-
-               if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR)
-                       *bits = 7;
-               else
-                       *bits = 8;
-
-               quot = amazon_readl(AMAZON_ASC_BTR) + 1;
-               
-               /* this gets hairy if the fractional divider is used */
-               if (lcr_h & ASCCON_FDE)
-               {
-                       div = 1;
-                       fdiv = amazon_readl(AMAZON_ASC_FDV);
-                       if (fdiv == 0)
-                               fdiv = 512;
-                       frac = 512;
-               }
-               else
-               {
-                       div = lcr_h & ASCCON_BRS ? 3 : 2;
-                       fdiv = frac = 1;
-               }
-               /*
-                * This doesn't work exactly because we use integer
-                * math to calculate baud which results in rounding
-                * errors when we try to go from quot -> baud !!
-                * Try to make this work for both the fractional divider
-                * and the simple divider. Also try to avoid rounding
-                * errors using integer math.
-                */
-               
-               *baud = frac * (port->uartclk / (div * 512 * 16 * quot));
-               if (*baud > 1100 && *baud < 2400)
-                       *baud = 1200;
-               if (*baud > 2300 && *baud < 4800)
-                       *baud = 2400;
-               if (*baud > 4700 && *baud < 9600)
-                       *baud = 4800;
-               if (*baud > 9500 && *baud < 19200)
-                       *baud = 9600;
-               if (*baud > 19000 && *baud < 38400)
-                       *baud = 19200;
-               if (*baud > 38400 && *baud < 57600)
-                       *baud = 38400;
-               if (*baud > 57600 && *baud < 115200)
-                       *baud = 57600;
-               if (*baud > 115200 && *baud < 230400)
-                       *baud = 115200;
-       }
-}
-
-static int __init amazonasc_console_setup(struct console *co, char *options)
-{
-       struct uart_port *port;
-       int baud = 115200;
-       int bits = 8;
-       int parity = 'n';
-       int flow = 'n';
-
-       /* this assumes: CON.BRS = CON.FDE = 0 */
-       if (uartclk == 0)
-               uartclk = amazon_get_fpi_hz();
-       co->index = 0;  
-       port = &amazonasc_ports[0];
-       amazonasc_ports[0].uartclk = uartclk;
-       amazonasc_ports[0].type = PORT_AMAZONASC;
-
-       if (options){
-               uart_parse_options(options, &baud, &parity, &bits, &flow);
-       }
-
-       return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver amazonasc_reg;
-static struct console amazonasc_console = {
-       name:           "ttyS",
-       write:          amazonasc_console_write,
-       device:         uart_console_device,
-       setup:          amazonasc_console_setup,
-       flags:          CON_PRINTBUFFER,
-       index:          -1,
-       data:           &amazonasc_reg,
-};
-
-static struct uart_driver amazonasc_reg = {
-       .owner =                        THIS_MODULE,
-       .driver_name =          "serial",
-       .dev_name =                     "ttyS",
-       .major =                        TTY_MAJOR,
-       .minor =                        64,
-       .nr =                           UART_NR,
-       .cons =                         &amazonasc_console,
-};
-
-static int amazon_asc_probe(struct platform_device *dev)
-{
-       unsigned char res;
-       uart_register_driver(&amazonasc_reg);
-       res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]);
-       return res;
-}
-
-static int amazon_asc_remove(struct platform_device *dev)
-{
-       uart_unregister_driver(&amazonasc_reg);
-       return 0;
-}
-
-static struct platform_driver amazon_asc_driver = {
-       .probe = amazon_asc_probe,
-       .remove = amazon_asc_remove,
-       .driver = {
-               .name = "amazon_asc",
-               .owner = THIS_MODULE,
-       },
-};
-
-static int __init amazon_asc_init(void)
-{
-       int ret = platform_driver_register(&amazon_asc_driver);
-       if (ret)
-               printk(KERN_WARNING "amazon_asc: error registering platfom driver!\n");
-       return ret;
-}
-
-static void __exit amazon_asc_cleanup(void)
-{
-       platform_driver_unregister(&amazon_asc_driver);
-}
-
-module_init(amazon_asc_init);
-module_exit(amazon_asc_cleanup);
-
-MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin");
-MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver");
-MODULE_LICENSE("GPL");
-
diff --git a/target/linux/amazon/files/drivers/watchdog/amazon_wdt.c b/target/linux/amazon/files/drivers/watchdog/amazon_wdt.c
deleted file mode 100644 (file)
index b18296b..0000000
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- * 
- * Copyright 2004 Wu Qi Ming <gokimi@msn.com>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/tty.h>
-#include <linux/selection.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/kdev_t.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/platform_device.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/amazon_wdt.h>
-
-#define DRV_NAME "AMAZON WDT:"
-
-#undef AMAZON_WDT_DEBUG 
-
-static int amazon_wdt_isopen = 0;
-
-#ifdef AMAZON_WDT_DEBUG
-static struct proc_dir_entry* amazon_wdt_dir;
-#endif
-
-int wdt_enable(int timeout)
-{
-       u32 hard_psw, ffpi;
-       int reload_value, divider = 1;
-  
-       ffpi = amazon_get_fpi_hz();
-
-       reload_value = 65536 - timeout * ffpi / 256;
-       
-       if (reload_value < 0) {
-               divider = 0;
-               reload_value = 65536 - timeout * ffpi / 16384;
-       }
-
-       if (reload_value < 0){
-               printk(KERN_INFO DRV_NAME "timeout too large %d\n", timeout);
-               return -EINVAL;
-       }
-       
-       printk(KERN_INFO DRV_NAME "timeout:%d reload_value: %8x\n", timeout, reload_value);
-       
-       hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
-                               (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;  
-       amazon_writel(hard_psw, AMAZON_WDT_CON0);
-       wmb();
-       
-       amazon_writel((hard_psw & 0xff00) + (reload_value << 16) + 0xf2, AMAZON_WDT_CON0);
-       wmb();
-
-       amazon_writel(divider << 2, AMAZON_WDT_CON1);  
-       wmb();
-       
-       hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
-                               (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
-       amazon_writel(hard_psw, AMAZON_WDT_CON0);
-       wmb();
-       
-       amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3);
-       wmb();
-       return 0;
-}
-
-void wdt_disable(void)
-{
-       u32 hard_psw = 0;
-
-       hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + 
-                       (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;  
-       amazon_writel(hard_psw, AMAZON_WDT_CON0);
-       wmb();
-
-       amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf2);
-       wmb();
-
-       amazon_writel_masked(AMAZON_WDT_CON1, 0x8, 0x8);  
-       wmb();
-
-       hard_psw=(amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
-                       (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;  
-       amazon_writel(hard_psw, AMAZON_WDT_CON0);
-       wmb();
-
-       amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3);
-       wmb();
-
-       return;
-}
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-#else
-static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-#endif
-{
-       int result=0;
-       static int timeout=-1;
-
-       switch(cmd){
-               case AMAZON_WDT_IOC_START:
-                       printk(KERN_INFO DRV_NAME "enable watch dog timer!\n");
-                       if (copy_from_user((void*)&timeout, (void*)arg, sizeof (int))) {
-                               printk(KERN_INFO DRV_NAME "invalid argument\n");
-                               result=-EINVAL;
-                       } else if ((result = wdt_enable(timeout)) < 0) {
-                               timeout = -1;
-                       }
-                       break;
-               
-               case AMAZON_WDT_IOC_STOP:
-                       printk(KERN_INFO DRV_NAME "disable watch dog timer\n");
-                       timeout = -1;
-                       wdt_disable();
-                       break;
-               
-               case AMAZON_WDT_IOC_PING:
-                       if (timeout < 0) {
-                               result = -EIO;
-                       } else {
-                               result = wdt_enable(timeout); 
-                       }               
-                       break;
-               
-               default:
-                       result=-EINVAL;
-                       break;
-       }
-       return result;
-}
-
-static ssize_t wdt_read(struct file *file, char *buf, size_t count, loff_t *offset)
-{
-       return 0;
-}
-
-static ssize_t wdt_write(struct file *file, const char *buf, size_t count, loff_t *offset)
-{      
-       return count;
-}
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
-       if (amazon_wdt_isopen == 1)
-               return -EBUSY;
-
-       amazon_wdt_isopen = 1;
-       printk(KERN_INFO DRV_NAME "opened\n");  
-       return 0;
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
-       amazon_wdt_isopen = 0;
-       printk(KERN_INFO DRV_NAME "closed\n");  
-       return 0;
-}
-
-#ifdef AMAZON_WDT_DEBUG
-int wdt_register_proc_read(char *buf, char **start, off_t offset,
-                         int count, int *eof, void *data)
-{
-       int len=0;
-       len+=sprintf(buf+len,"NMISR:    0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_NMISR));
-       len+=sprintf(buf+len,"RST_REQ:  0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_REQ));
-       len+=sprintf(buf+len,"RST_SR:   0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_SR));
-       len+=sprintf(buf+len,"WDT_CON0: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON0));
-       len+=sprintf(buf+len,"WDT_CON1: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON1));
-       len+=sprintf(buf+len,"WDT_SR:   0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_SR));
-       *eof = 1;
-       return len;
-}
-#endif
-
-static struct file_operations wdt_fops = {
-       read:           wdt_read,
-       write:          wdt_write,
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-       unlocked_ioctl: wdt_ioctl,
-#else
-       ioctl:          wdt_ioctl,
-#endif
-       open:           wdt_open,
-       release:        wdt_release,    
-};
-
-static int amazon_wdt_probe(struct platform_device *dev)
-{
-       int result = result = register_chrdev(0, "watchdog", &wdt_fops);
-       
-       if (result < 0) {
-        printk(KERN_INFO DRV_NAME "cannot register device\n");
-               return result;
-       }
-
-#ifdef AMAZON_WDT_DEBUG
-       amazon_wdt_dir=proc_mkdir("amazon_wdt",NULL);
-       create_proc_read_entry("wdt_register", 0, amazon_wdt_dir,
-                               wdt_register_proc_read, NULL);  
-#endif
-
-       amazon_wdt_isopen=0;
-       printk(KERN_INFO DRV_NAME "driver loaded but inactive\n");
-       return 0;
-}
-
-static int amazon_wdt_remove(struct platform_device *dev)
-{
-       unregister_chrdev(0, "watchdog");
-#ifdef AMAZON_WDT_DEBUG
-       remove_proc_entry("wdt_register", amazon_wdt_dir);
-       remove_proc_entry("amazon_wdt", NULL);
-#endif
-       printk(KERN_INFO DRV_NAME "unregistered\n");
-       return 0;
-}
-
-static struct platform_driver amazon_wdt_driver = {
-       .probe = amazon_wdt_probe,
-       .remove = amazon_wdt_remove,
-       .driver = {
-               .name = "amazon_wdt",
-               .owner = THIS_MODULE,
-       },
-};
-
-static int __init amazon_wdt_init(void)
-{
-       int ret = platform_driver_register(&amazon_wdt_driver);
-       if (ret)
-               printk(KERN_WARNING "amazon_wdt: error registering platfom driver!\n");
-       return ret;
-}
-
-static void __exit amazon_wdt_exit(void)
-{
-       platform_driver_unregister(&amazon_wdt_driver);
-}
-
-module_init(amazon_wdt_init);
-module_exit(amazon_wdt_exit);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR("Infineon / John Crispin <blogic@openwrt.org>");
-MODULE_DESCRIPTION("AMAZON WDT driver");
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h b/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h
deleted file mode 100644 (file)
index 77cf4b1..0000000
+++ /dev/null
@@ -1,232 +0,0 @@
-/******************************************************************************
-     Copyright (c) 2004, Infineon Technologies.  All rights reserved.
-
-                               No Warranty
-   Because the program is licensed free of charge, there is no warranty for
-   the program, to the extent permitted by applicable law.  Except when
-   otherwise stated in writing the copyright holders and/or other parties
-   provide the program "as is" without warranty of any kind, either
-   expressed or implied, including, but not limited to, the implied
-   warranties of merchantability and fitness for a particular purpose. The
-   entire risk as to the quality and performance of the program is with
-   you.  should the program prove defective, you assume the cost of all
-   necessary servicing, repair or correction.
-
-   In no event unless required by applicable law or agreed to in writing
-   will any copyright holder, or any other party who may modify and/or
-   redistribute the program as permitted above, be liable to you for
-   damages, including any general, special, incidental or consequential
-   damages arising out of the use or inability to use the program
-   (including but not limited to loss of data or data being rendered
-   inaccurate or losses sustained by you or third parties or a failure of
-   the program to operate with any other programs), even if such holder or
-   other party has been advised of the possibility of such damages.
- ******************************************************************************
-   Module      : ifx_swdrv.h
-   Date        : 2004-09-01
-   Description : JoeLin
-   Remarks:
-
- *****************************************************************************/
-
-#ifndef _ADM_6996_MODULE_H_
-#define _ADM_6996_MODULE_H_
-
-#include <asm/amazon/amazon.h>
-
-#define ifx_printf(x)       printk x
-
-/* command codes */
-#define ADM_SW_SMI_READ     0x02
-#define ADM_SW_SMI_WRITE    0x01
-#define ADM_SW_SMI_START    0x01
-
-#define ADM_SW_EEPROM_WRITE     0x01
-#define ADM_SW_EEPROM_WRITE_ENABLE  0x03
-#define ADM_SW_EEPROM_WRITE_DISABLE 0x00
-#define EEPROM_TYPE     8   /* for 93C66 */
-
-/* bit masks */
-#define ADM_SW_BIT_MASK_1   0x00000001
-#define ADM_SW_BIT_MASK_2   0x00000002
-#define ADM_SW_BIT_MASK_4   0x00000008
-#define ADM_SW_BIT_MASK_10  0x00000200
-#define ADM_SW_BIT_MASK_16  0x00008000
-#define ADM_SW_BIT_MASK_32  0x80000000
-
-/* delay timers */
-#define ADM_SW_MDC_DOWN_DELAY   5
-#define ADM_SW_MDC_UP_DELAY 5
-#define ADM_SW_CS_DELAY     5
-
-/* MDIO modes */
-#define ADM_SW_MDIO_OUTPUT  1
-#define ADM_SW_MDIO_INPUT   0
-
-#define ADM_SW_MAX_PORT_NUM 5
-#define ADM_SW_MAX_VLAN_NUM 15
-
-/* registers */
-#define ADM_SW_PORT0_CONF   0x1
-#define ADM_SW_PORT1_CONF   0x3
-#define ADM_SW_PORT2_CONF   0x5
-#define ADM_SW_PORT3_CONF   0x7
-#define ADM_SW_PORT4_CONF   0x8
-#define ADM_SW_PORT5_CONF   0x9
-#define ADM_SW_VLAN_MODE    0x11
-#define ADM_SW_MAC_LOCK     0x12
-#define ADM_SW_VLAN0_CONF   0x13
-#define ADM_SW_PORT0_PVID   0x28
-#define ADM_SW_PORT1_PVID   0x29
-#define ADM_SW_PORT2_PVID   0x2a
-#define ADM_SW_PORT34_PVID  0x2b
-#define ADM_SW_PORT5_PVID   0x2c
-#define ADM_SW_PHY_RESET    0x2f
-#define ADM_SW_MISC_CONF    0x30
-#define ADM_SW_BNDWDH_CTL0  0x31
-#define ADM_SW_BNDWDH_CTL1  0x32
-#define ADM_SW_BNDWDH_CTL_ENA   0x33
-
-/* port modes */
-#define ADM_SW_PORT_FLOWCTL 0x1 /* 802.3x flow control */
-#define ADM_SW_PORT_AN      0x2 /* auto negotiation */
-#define ADM_SW_PORT_100M    0x4 /* 100M */
-#define ADM_SW_PORT_FULL    0x8 /* full duplex */
-#define ADM_SW_PORT_TAG     0x10    /* output tag on */
-#define ADM_SW_PORT_DISABLE 0x20    /* disable port */
-#define ADM_SW_PORT_TOS     0x40    /* TOS first */
-#define ADM_SW_PORT_PPRI    0x80    /* port based priority first */
-#define ADM_SW_PORT_MDIX    0x8000  /* auto MDIX on */
-#define ADM_SW_PORT_PVID_SHIFT  10
-#define ADM_SW_PORT_PVID_BITS   4
-
-/* VLAN */
-#define ADM_SW_VLAN_PORT0   0x1
-#define ADM_SW_VLAN_PORT1   0x2
-#define ADM_SW_VLAN_PORT2   0x10
-#define ADM_SW_VLAN_PORT3   0x40
-#define ADM_SW_VLAN_PORT4   0x80
-#define ADM_SW_VLAN_PORT5   0x100
-
-
-/* GPIO 012 enabled, output mode */
-#define GPIO_ENABLEBITS 0x000700f8
-
-/*
-  define AMAZON GPIO port to ADM6996 EEPROM interface
-  MDIO ->   EEDI        GPIO 16, AMAZON GPIO P1.0, bi-direction
-  MDC ->    EESK        GPIO 17, AMAZON GPIO P1.1, output only
-  MDCS ->   EECS        GPIO 18, AMAZON GPIO P1.2, output only
-            EEDO        GPIO 15, AMAZON GPIO P0.15, do not need this one! */
-
-#define GPIO_MDIO   1          //P1.0
-#define GPIO_MDC    2          //P1.1
-#define GPIO_MDCS   4          //P1.2
-
-//joelin #define GPIO_MDIO   0
-//joelin #define GPIO_MDC    5   /* PORT 0 GPIO5 */
-//joelin #define GPIO_MDCS   6   /* PORT 0 GPIO6 */
-
-
-#define MDIO_INPUT  0x00000001
-#define MDIO_OUTPUT_EN  0x00010000
-
-
-/* type definitions */
-typedef unsigned char U8;
-typedef unsigned short U16;
-typedef unsigned int U32;
-
-typedef struct _REGRW_
-{
-  unsigned int addr;
-  unsigned int value;
-  unsigned int mode;
-}REGRW, *PREGRW;
-
-//joelin adm6996i
-typedef struct _MACENTRY_
-{
-       unsigned char mac_addr[6];
-       unsigned long fid:4;
-            unsigned long portmap:6;
-       union  {
-               unsigned long age_timer:9;
-               unsigned long info_ctrl:9;
-       } ctrl;
-       unsigned long occupy:1;
-       unsigned long info_type:1;
-       unsigned long bad:1;
-       unsigned long result:3;//000:command ok ,001:all entry used,010:Entry Not found  ,011:try next entry ,101:command error
-       
- }MACENTRY, *PMACENTRY;
-typedef struct _PROTOCOLFILTER_
-{
-       int protocol_filter_num;//[0~7]
-       int ip_p; //Value Compared with Protocol in IP Heade[7:0]
-       char action:2;//Action for protocol Filter .
-//00 = Protocol Portmap is Default Output Ports.
-//01 = Protocol Portmap is 6'b0.
-//10 = Protocol Portmap is the CPU port if the incoming port 
-//is not the CPU port. But if the incoming port is the CPU port, then Type Portmap contains Default Output Ports, excluding the CPU port.
- }PROTOCOLFILTER, *PPROTOCOLFILTER;
-
-//joelin adm6996i
-
-/* Santosh: for IGMP proxy/snooping */
-
-//050614:fchang int adm_process_mac_table_request (unsigned int cmd, struct _MACENTRY_ *mac);
-//050614:fchang int adm_process_protocol_filter_request (unsigned int cmd, struct _PROTOCOLFILTER_ *filter);
-
-
-/* IOCTL keys */
-#define KEY_IOCTL_ADM_REGRW            0x01
-#define KEY_IOCTL_ADM_SW_REGRW         0x02
-#define KEY_IOCTL_ADM_SW_PORTSTS       0x03
-#define KEY_IOCTL_ADM_SW_INIT          0x04
-//for adm6996i-start
-#define        KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD             0x05
-#define        KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL             0x06
-#define        KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT        0x07
-#define        KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE        0x08
-#define        KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD               0x09
-#define        KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL               0x0a
-#define        KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET               0x0b
-//adm6996i #define KEY_IOCTL_MAX_KEY       0x05
-#define KEY_IOCTL_MAX_KEY       0x0c
-//for adm6996i-end
-/* IOCTL MAGIC */
-#define ADM_MAGIC  ('a'|'d'|'m'|'t'|'e'|'k')
-
-/* IOCTL parameters */
-#define ADM_IOCTL_REGRW         _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_REGRW, REGRW)
-#define ADM_SW_IOCTL_REGRW      _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_REGRW, REGRW)
-#define ADM_SW_IOCTL_PORTSTS    _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_PORTSTS, NULL)
-#define ADM_SW_IOCTL_INIT       _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_INIT, NULL)
-
-
-//6996i-stat
-#define ADM_SW_IOCTL_MACENTRY_ADD          _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD,MACENTRY)
-#define ADM_SW_IOCTL_MACENTRY_DEL          _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL,MACENTRY)
-#define ADM_SW_IOCTL_MACENTRY_GET_INIT      _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT,MACENTRY)
-#define ADM_SW_IOCTL_MACENTRY_GET_MORE      _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE,MACENTRY)
-#define ADM_SW_IOCTL_FILTER_ADD                    _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD,PROTOCOLFILTER)  
-#define ADM_SW_IOCTL_FILTER_DEL                    _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL,PROTOCOLFILTER)
-#define ADM_SW_IOCTL_FILTER_GET                    _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET,PROTOCOLFILTER)  
-//6996i-end
-
-
-#define REG_READ    0x0
-#define REG_WRITE   0x1
-
-/* undefine symbol */
-#define AMAZON_SW_REG(reg)  *((volatile U32*)(reg))
-//#define GPIO0_INPUT_MASK    0
-//#define GPIO_conf0_REG      0x12345678
-//#define GPIO_SET_HI
-//#define GPIO_SET_LOW
-
-#endif
-/* _ADM_6996_MODULE_H_ */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon.h
deleted file mode 100644 (file)
index 28af7f5..0000000
+++ /dev/null
@@ -1,1447 +0,0 @@
-#ifndef AMAZON_H
-#define AMAZON_H
-/******************************************************************************
-       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
-
-                               No Warranty
-   Because the program is licensed free of charge, there is no warranty for 
-   the program, to the extent permitted by applicable law.  Except when     
-   otherwise stated in writing the copyright holders and/or other parties   
-   provide the program "as is" without warranty of any kind, either         
-   expressed or implied, including, but not limited to, the implied         
-   warranties of merchantability and fitness for a particular purpose. The  
-   entire risk as to the quality and performance of the program is with     
-   you.  should the program prove defective, you assume the cost of all     
-   necessary servicing, repair or correction.                               
-                                                                            
-   In no event unless required by applicable law or agreed to in writing    
-   will any copyright holder, or any other party who may modify and/or      
-   redistribute the program as permitted above, be liable to you for        
-   damages, including any general, special, incidental or consequential     
-   damages arising out of the use or inability to use the program           
-   (including but not limited to loss of data or data being rendered        
-   inaccurate or losses sustained by you or third parties or a failure of   
-   the program to operate with any other programs), even if such holder or  
-   other party has been advised of the possibility of such damages. 
-******************************************************************************/
-
-#define amazon_readl(a)                                        __raw_readl(((u32*)(a)))
-#define amazon_writel(a,b)                             __raw_writel(a, ((u32*)(b)))
-#define amazon_writel_masked(a,b,c)            __raw_writel((__raw_readl(((u32*)(a))) & ~b) | (c & b), ((u32*)(a)))
-
-unsigned int amazon_get_fpi_hz(void);
-
-#define IOPORT_RESOURCE_START          0x10000000
-#define IOPORT_RESOURCE_END            0xffffffff
-#define IOMEM_RESOURCE_START           0x10000000
-#define IOMEM_RESOURCE_END             0xffffffff
-
-/* check ADSL link status */
-#define AMAZON_CHECK_LINK
-         
-/***********************************************************************/
-/*  Module      :  WDT register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_WDT                          (KSEG1+0x10100900)
-/***********************************************************************/   
-    
-/***Reset Request Register***/ 
-#define AMAZON_RST_REQ                      ((volatile u32*)(AMAZON_WDT+ 0x0010))
-#define AMAZON_RST_REQ_PLL                             (1 << 31)
-#define AMAZON_RST_REQ_PCI_CORE                        (1 << 13) 
-#define AMAZON_RST_REQ_TPE                             (1 << 12)
-#define AMAZON_RST_REQ_AFE                             (1 << 11)
-#define AMAZON_RST_REQ_DMA                             (1 << 9)
-#define AMAZON_RST_REQ_SWITCH                          (1 << 8)
-#define AMAZON_RST_REQ_DFE                             (1 << 7)
-#define AMAZON_RST_REQ_PHY                             (1 << 5)
-#define AMAZON_RST_REQ_PCI                             (1 << 4)
-#define AMAZON_RST_REQ_FPI                             (1 << 2)
-#define AMAZON_RST_REQ_CPU                             (1 << 1)
-#define AMAZON_RST_REQ_HRST                            (1 << 0)
-#define AMAZON_RST_ALL                         (AMAZON_RST_REQ_PLL     \
-                                               |AMAZON_RST_REQ_PCI_CORE \
-                                               |AMAZON_RST_REQ_TPE     \
-                                               |AMAZON_RST_REQ_AFE     \
-                                               |AMAZON_RST_REQ_DMA     \
-                                               |AMAZON_RST_REQ_SWITCH  \
-                                               |AMAZON_RST_REQ_DFE     \
-                                               |AMAZON_RST_REQ_PHY     \
-                                               |AMAZON_RST_REQ_PCI     \
-                                               |AMAZON_RST_REQ_FPI     \
-                                               |AMAZON_RST_REQ_CPU     \
-                                               |AMAZON_RST_REQ_HRST)
-      
-/***Reset Status Register Power On***/ 
-#define AMAZON_RST_SR                       ((volatile u32*)(AMAZON_WDT+ 0x0014))
-
-/***Watchdog Timer Control Register 0***/ 
-#define AMAZON_WDT_CON0                    ((volatile u32*)(AMAZON_WDT+ 0x0020))
-      
-/***Watchdog Timer Control Register 1***/ 
-#define AMAZON_WDT_CON1                    ((volatile u32*)(AMAZON_WDT+ 0x0024))
-#define AMAZON_WDT_CON1_WDTDR                          (1 << 3)
-#define AMAZON_WDT_CON1_WDTIR                          (1 << 2)
-      
-/***Watchdog Timer Status Register***/ 
-#define AMAZON_WDT_SR                       ((volatile u32*)(AMAZON_WDT+ 0x0028))
-#define AMAZON_WDT_SR_WDTTIM(value)             (((( 1 << 16) - 1) & (value)) << 16)
-#define AMAZON_WDT_SR_WDTPR                          (1 << 5)
-#define AMAZON_WDT_SR_WDTTO                          (1 << 4)
-#define AMAZON_WDT_SR_WDTDS                          (1 << 3)
-#define AMAZON_WDT_SR_WDTIS                          (1 << 2)
-#define AMAZON_WDT_SR_WDTOE                          (1 << 1)
-#define AMAZON_WDT_SR_WDTAE                          (1 << 0)          
-
-/***NMI Status Register***/ 
-#define AMAZON_WDT_NMISR                               ((volatile u32*)(AMAZON_WDT+ 0x002C))
-#define AMAZON_WDT_NMISR_NMIWDT                        (1 << 2)
-#define AMAZON_WDT_NMISR_NMIPLL                        (1 << 1)
-#define AMAZON_WDT_NMISR_NMIEXT                        (1 << 0)
-      
-#define AMAZON_WDT_RST_MON                             ((volatile u32*)(AMAZON_WDT+ 0x0030))
-
-/***********************************************************************/
-/*  Module      :  MCD register address and bits                       */
-/***********************************************************************/
-#define AMAZON_MCD                                     (KSEG1+0x1F106000)
-
-/***Manufacturer Identification Register***/ 
-#define AMAZON_MCD_MANID                               ((volatile u32*)(AMAZON_MCD+ 0x0024))
-#define AMAZON_MCD_MANID_MANUF(value)                  (((( 1 << 11) - 1) & (value)) << 5)
-
-/***Chip Identification Register***/ 
-#define AMAZON_MCD_CHIPID                              ((volatile u32*)(AMAZON_MCD+ 0x0028))
-#define AMAZON_MCD_CHIPID_VERSION_GET(value)             (((value) >> 28) & ((1 << 4) - 1))
-#define AMAZON_MCD_CHIPID_VERSION_SET(value)             (((( 1 << 4) - 1) & (value)) << 28)
-#define AMAZON_MCD_CHIPID_PART_NUMBER_GET(value)         (((value) >> 12) & ((1 << 16) - 1))
-#define AMAZON_MCD_CHIPID_PART_NUMBER_SET(value)         (((( 1 << 16) - 1) & (value)) << 12)
-#define AMAZON_MCD_CHIPID_MANID_GET(value)               (((value) >> 1) & ((1 << 11) - 1))
-#define AMAZON_MCD_CHIPID_MANID_SET(value)               (((( 1 << 11) - 1) & (value)) << 1)
-
-#define AMAZON_CHIPID_STANDARD                         0x00EB
-#define AMAZON_CHIPID_YANGTSE                          0x00ED
-
-/***Redesign Tracing Identification Register***/ 
-#define AMAZON_MCD_RTID                                ((volatile u32*)(AMAZON_MCD+ 0x002C))
-#define AMAZON_MCD_RTID_LC                              (1 << 15)
-#define AMAZON_MCD_RTID_RIX(value)                     (((( 1 << 3) - 1) & (value)) << 0)
-
-                 
-/***********************************************************************/
-/*  Module      :  CGU register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_CGU                          (KSEG1+0x1F103000)
-/***********************************************************************/   
-
-/***CGU Clock Divider Select Register***/
-#define AMAZON_CGU_DIV                                                 (AMAZON_CGU + 0x0000)                   
-/***CGU PLL0 Status Register***/ 
-#define AMAZON_CGU_PLL0SR                                              (AMAZON_CGU + 0x0004)
-/***CGU PLL1 Status Register***/ 
-#define AMAZON_CGU_PLL1SR                                              (AMAZON_CGU + 0x0008)
-/***CGU Interface Clock Control Register***/ 
-#define AMAZON_CGU_IFCCR                                               (AMAZON_CGU + 0x000c)
-/***CGU Oscillator Control Register***/ 
-#define AMAZON_CGU_OSCCR                                               (AMAZON_CGU + 0x0010)
-/***CGU Memory Clock Delay Register***/ 
-#define AMAZON_CGU_MCDEL                                               (AMAZON_CGU + 0x0014)
-/***CGU CPU Clock Reduction Register***/ 
-#define AMAZON_CGU_CPUCRD                                              (AMAZON_CGU + 0x0018)
-/***CGU Test Register**/
-#define AMAZON_CGU_TST                                                 (AMAZON_CGU + 0x003c)
-
-/***********************************************************************/
-/*  Module      :  PMU register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_PMU                                                             AMAZON_CGU
-/***********************************************************************/   
-
-      
-/***PMU Power Down Control Register***/ 
-#define AMAZON_PMU_PWDCR                       ((volatile u32*)(AMAZON_PMU+ 0x001c))
-#define AMAZON_PMU_PWDCR_TPE                            (1 << 13)
-#define AMAZON_PMU_PWDCR_PLL                            (1 << 12)
-#define AMAZON_PMU_PWDCR_XTAL                           (1 << 11)
-#define AMAZON_PMU_PWDCR_EBU                            (1 << 10)
-#define AMAZON_PMU_PWDCR_DFE                            (1 << 9)
-#define AMAZON_PMU_PWDCR_SPI                            (1 << 8)
-#define AMAZON_PMU_PWDCR_UART                           (1 << 7)
-#define AMAZON_PMU_PWDCR_GPT                            (1 << 6)
-#define AMAZON_PMU_PWDCR_DMA                            (1 << 5)
-#define AMAZON_PMU_PWDCR_PCI                            (1 << 4)
-#define AMAZON_PMU_PWDCR_SW                             (1 << 3)
-#define AMAZON_PMU_PWDCR_IOR                           (1 << 2)
-#define AMAZON_PMU_PWDCR_FPI                           (1 << 1)
-#define AMAZON_PMU_PWDCR_EPHY                          (1 << 0)
-      
-/***PMU Status Register***/ 
-#define AMAZON_PMU_SR                        ((volatile u32*)(AMAZON_PMU+ 0x0020))
-#define AMAZON_PMU_SR_TPE                              (1 << 13)
-#define AMAZON_PMU_SR_PLL                              (1 << 12)
-#define AMAZON_PMU_SR_XTAL                             (1 << 11)
-#define AMAZON_PMU_SR_EBU                              (1 << 10)
-#define AMAZON_PMU_SR_DFE                              (1 << 9)
-#define AMAZON_PMU_SR_SPI                              (1 << 8)
-#define AMAZON_PMU_SR_UART                             (1 << 7)
-#define AMAZON_PMU_SR_GPT                              (1 << 6)
-#define AMAZON_PMU_SR_DMA                              (1 << 5)
-#define AMAZON_PMU_SR_PCI                              (1 << 4)
-#define AMAZON_PMU_SR_SW                               (1 << 3)
-#define AMAZON_PMU_SR_IOR                                      (1 << 2)
-#define AMAZON_PMU_SR_FPI                              (1 << 1)
-#define AMAZON_PMU_SR_EPHY                             (1 << 0)
-         
-/***********************************************************************/
-/*  Module      :  BCU register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_BCU                          (KSEG1+0x10100000)
-/***********************************************************************/   
-
-      
-/***BCU Control Register (0010H)***/ 
-#define AMAZON_BCU_CON                      ((volatile u32*)(AMAZON_BCU+ 0x0010))
-#define AMAZON_BCU_CON_SPC(value)                (((( 1 << 8) - 1) & (value)) << 24)
-#define AMAZON_BCU_CON_SPE                              (1 << 19)
-#define AMAZON_BCU_CON_PSE                              (1 << 18)
-#define AMAZON_BCU_CON_DBG                              (1 << 16)
-#define AMAZON_BCU_CON_TOUT(value)               (((( 1 << 16) - 1) & (value)) << 0)
-      
-/***BCU Error Control Capture Register (0020H)***/ 
-#define AMAZON_BCU_ECON                    ((volatile u32*)(AMAZON_BCU+ 0x0020))
-#define AMAZON_BCU_ECON_TAG(value)                (((( 1 << 4) - 1) & (value)) << 24)
-#define AMAZON_BCU_ECON_RDN                              (1 << 23)
-#define AMAZON_BCU_ECON_WRN                              (1 << 22)
-#define AMAZON_BCU_ECON_SVM                              (1 << 21)
-#define AMAZON_BCU_ECON_ACK(value)                (((( 1 << 2) - 1) & (value)) << 19)
-#define AMAZON_BCU_ECON_ABT                              (1 << 18)
-#define AMAZON_BCU_ECON_RDY                              (1 << 17)
-#define AMAZON_BCU_ECON_TOUT                            (1 << 16)
-#define AMAZON_BCU_ECON_ERRCNT(value)             (((( 1 << 16) - 1) & (value)) << 0)
-#define AMAZON_BCU_ECON_OPC(value)                (((( 1 << 4) - 1) & (value)) << 28)
-      
-/***BCU Error Address Capture Register (0024 H)***/ 
-#define AMAZON_BCU_EADD                    ((volatile u32*)(AMAZON_BCU+ 0x0024))
-#define AMAZON_BCU_EADD_FPIADR
-      
-/***BCU Error Data Capture Register (0028H)***/ 
-#define AMAZON_BCU_EDAT                    ((volatile u32*)(AMAZON_BCU+ 0x0028))
-#define AMAZON_BCU_EDAT_FPIDAT         
-         
-/***********************************************************************/
-/*  Module      :  Switch register address and bits                    */
-/***********************************************************************/
-         
-#define AMAZON_SWITCH                       (KSEG1+0x10106000)
-/***********************************************************************/   
-#define AMAZON_SW_UN_DEST                      AMAZON_SWITCH+0x00 /*Unknown destination register*/
-#define AMAZON_SW_VLAN_CTRL                    AMAZON_SWITCH+0x04 /*VLAN control register*/
-#define AMAZON_SW_PS_CTL                       AMAZON_SWITCH+0x08 /*port status control register*/
-#define AMAZON_SW_COS_CTL                      AMAZON_SWITCH+0x0c /*Cos control register*/
-#define        AMAZON_SW_VLAN_COS                      AMAZON_SWITCH+0x10 /*VLAN priority cos mapping register*/
-#define AMAZON_SW_DSCP_COS3                    AMAZON_SWITCH+0x14 /*DSCP cos mapping register3*/
-#define AMAZON_SW_DSCP_COS2                    AMAZON_SWITCH+0x18 /*DSCP cos mapping register2*/
-#define AMAZON_SW_DSCP_COS1                    AMAZON_SWITCH+0x1c /*DSCP cos mapping register1*/
-#define AMAZON_SW_DSCP_COS0                    AMAZON_SWITCH+0x20 /*DSCP cos mapping register*/
-#define AMAZON_SW_ARL_CTL                      AMAZON_SWITCH+0x24 /*ARL control register*/
-#define AMAZON_SW_PKT_LEN                      AMAZON_SWITCH+0x28 /*packet length register*/
-#define AMAZON_SW_CPU_ACTL                     AMAZON_SWITCH+0x2c /*CPU control register1*/
-#define AMAZON_SW_DATA1                        AMAZON_SWITCH+0x30 /*CPU access control register1*/
-#define AMAZON_SW_DATA2                        AMAZON_SWITCH+0x34 /*CPU access control register2*/
-#define AMAZON_SW_P2_PCTL                      AMAZON_SWITCH+0x38 /*Port2 control register*/
-#define AMAZON_SW_P0_TX_CTL                    AMAZON_SWITCH+0x3c /*port0 TX control register*/
-#define AMAZON_SW_P1_TX_CTL                    AMAZON_SWITCH+0x40 /*port 1 TX control register*/
-#define AMAZON_SW_P0_WM                        AMAZON_SWITCH+0x44 /*port 0 watermark control register*/
-#define AMAZON_SW_P1_WM                        AMAZON_SWITCH+0x48 /*port 1 watermark control register*/
-#define AMAZON_SW_P2_WM                        AMAZON_SWITCH+0x4c /*port 2 watermark control register*/
-#define AMAZON_SW_GBL_WM                       AMAZON_SWITCH+0x50 /*Global watermark register*/
-#define AMAZON_SW_PM_CTL                       AMAZON_SWITCH+0x54 /*PM control register*/
-#define AMAZON_SW_P2_CTL                       AMAZON_SWITCH+0x58 /*PMAC control register*/
-#define AMAZON_SW_P2_TX_IPG                    AMAZON_SWITCH+0x5c /*port2 TX IPG control register*/
-#define AMAZON_SW_P2_RX_IPG                    AMAZON_SWITCH+0x60 /*prot2 RX IPG control register*/
-#define AMAZON_SW_MDIO_ACC                     AMAZON_SWITCH+0x64 /*MDIO access register*/
-#define AMAZON_SW_EPHY                         AMAZON_SWITCH+0x68 /*Ethernet PHY register*/
-#define AMAZON_SW_MDIO_CFG                     AMAZON_SWITCH+0x6c /*MDIO configuration register*/
-#define AMAZON_SW_P0_RCV_DROP_CNT              AMAZON_SWITCH+0x70 /*port0 receive drop counter */
-#define AMAZON_SW_P0_RCV_FRAME_ERR_CNT         AMAZON_SWITCH+0x74 /*port0 receive frame error conter*/
-#define AMAZON_SW_P0_TX_COLL_CNT               AMAZON_SWITCH+0x78 /*port0 transmit collision counter*/ 
-#define AMAZON_SW_P0_TX_DROP_CNT               AMAZON_SWITCH+0x7c /*port1 transmit drop counter*/
-#define AMAZON_SW_P1_RCV_DROP_CNT              AMAZON_SWITCH+0x80 /*port1 receive drop counter*/
-#define AMAZON_SW_P1_RCV_FRAME_ERR_CNT         AMAZON_SWITCH+0x84 /*port1 receive error counter*/
-#define AMAZON_SW_P1_TX_COLL_CNT               AMAZON_SWITCH+0x88 /*port1 transmit collision counter*/
-#define AMAZON_SW_P1_TX_DROP_CNT               AMAZON_SWITCH+0x8c /*port1 transmit drop counter*/
-
-
-         
-/***********************************************************************/
-/*  Module      :  SSC register address and bits                      */
-/***********************************************************************/
-#define AMAZON_SSC_BASE_ADD_0                  (KSEG1+0x10100800)         
-
-/*165001:henryhsu:20050603:Source add by Bing Tao*/
-
-/*configuration/Status Registers in Bus Clock Domain*/
-#define AMAZON_SSC_CLC                          ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0000))
-#define AMAZON_SSC_ID                           ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0008))
-#define AMAZON_SSC_CON                          ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0010))
-#define AMAZON_SSC_STATE                       ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0014))
-#define AMAZON_SSC_WHBSTATE                    ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0018))
-#define AMAZON_SSC_TB                          ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0020))
-#define AMAZON_SSC_RB                          ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0024))
-#define AMAZON_SSC_FSTAT                       ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0038)) 
-
-/*Configuration/Status Registers in Kernel Clock Domain*/
-#define AMAZON_SSC_PISEL                       ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0004))
-#define AMAZON_SSC_RXFCON                      ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0030))
-#define AMAZON_SSC_TXFCON                      ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0034))
-#define AMAZON_SSC_BR                          ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0040))
-#define AMAZON_SSC_BRSTAT                      ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0044))
-#define AMAZON_SSC_SFCON                       ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0060))
-#define AMAZON_SSC_SFSTAT                      ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0064))
-#define AMAZON_SSC_GPOCON                      ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0070))
-#define AMAZON_SSC_GPOSTAT                     ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0074))
-#define AMAZON_SSC_WHBGPOSTAT                  ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0078))
-#define AMAZON_SSC_RXREQ                       ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0080))
-#define AMAZON_SSC_RXCNT                       ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0084))
-
-/*DMA Registers in Bus Clock Domain*/
-#define AMAZON_SSC_DMA_CON                     ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00ec))
-
-/*interrupt Node Registers in Bus Clock Domain*/
-#define AMAZON_SSC_IRNEN                       ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F4))
-#define AMAZON_SSC_IRNICR                      ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00FC))
-#define AMAZON_SSC_IRNCR                       ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F8))
-
-/*165001*/
-
-/***********************************************************************/   
-
-      
-         
-/***********************************************************************/
-/*  Module      :  EBU register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_EBU                          (KSEG1+0x10105300)
-/***********************************************************************/   
-
-      
-/***EBU Clock Control Register***/ 
-#define AMAZON_EBU_CLC                      ((volatile u32*)(AMAZON_EBU+ 0x0000))
-#define AMAZON_EBU_CLC_DISS                            (1 << 1)
-#define AMAZON_EBU_CLC_DISR                            (1 << 0)
-      
-/***EBU Global Control Register***/ 
-#define AMAZON_EBU_CON                      ((volatile u32*)(AMAZON_EBU+ 0x0010))
-#define AMAZON_EBU_CON_DTACS(value)              (((( 1 << 3) - 1) & (value)) << 20)
-#define AMAZON_EBU_CON_DTARW(value)              (((( 1 << 3) - 1) & (value)) << 16)
-#define AMAZON_EBU_CON_TOUTC(value)              (((( 1 << 8) - 1) & (value)) << 8)
-#define AMAZON_EBU_CON_ARBMODE(value)            (((( 1 << 2) - 1) & (value)) << 6)
-#define AMAZON_EBU_CON_ARBSYNC                      (1 << 5)
-#define AMAZON_EBU_CON_1                              (1 << 3)
-      
-/***EBU Address Select Register 0***/ 
-#define AMAZON_EBU_ADDSEL0                  ((volatile u32*)(AMAZON_EBU+ 0x0020))
-#define AMAZON_EBU_ADDSEL0_BASE(value)               (((( 1 << 20) - 1) & (value)) << 12)
-#define AMAZON_EBU_ADDSEL0_MASK(value)               (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_EBU_ADDSEL0_MIRRORE                      (1 << 1)
-#define AMAZON_EBU_ADDSEL0_REGEN                          (1 << 0)
-      
-/***EBU Address Select Register 1***/ 
-#define AMAZON_EBU_ADDSEL1                  ((volatile u32*)(AMAZON_EBU+ 0x0024))
-#define AMAZON_EBU_ADDSEL1_BASE(value)               (((( 1 << 20) - 1) & (value)) << 12)
-#define AMAZON_EBU_ADDSEL1_MASK(value)               (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_EBU_ADDSEL1_MIRRORE                      (1 << 1)
-#define AMAZON_EBU_ADDSEL1_REGEN                          (1 << 0)
-      
-/***EBU Address Select Register 2***/ 
-#define AMAZON_EBU_ADDSEL2                  ((volatile u32*)(AMAZON_EBU+ 0x0028))
-#define AMAZON_EBU_ADDSEL2_BASE(value)               (((( 1 << 20) - 1) & (value)) << 12)
-#define AMAZON_EBU_ADDSEL2_MASK(value)               (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_EBU_ADDSEL2_MIRRORE                      (1 << 1)
-#define AMAZON_EBU_ADDSEL2_REGEN                          (1 << 0)
-      
-/***EBU Bus Configuration Register 0***/ 
-#define AMAZON_EBU_BUSCON0                  ((volatile u32*)(AMAZON_EBU+ 0x0060))
-#define AMAZON_EBU_BUSCON0_WRDIS                          (1 << 31)
-#define AMAZON_EBU_BUSCON0_ALEC(value)               (((( 1 << 2) - 1) & (value)) << 29)
-#define AMAZON_EBU_BUSCON0_BCGEN(value)              (((( 1 << 2) - 1) & (value)) << 27)
-#define AMAZON_EBU_BUSCON0_AGEN(value)               (((( 1 << 2) - 1) & (value)) << 24)
-#define AMAZON_EBU_BUSCON0_CMULTR(value)             (((( 1 << 2) - 1) & (value)) << 22)
-#define AMAZON_EBU_BUSCON0_WAIT(value)               (((( 1 << 2) - 1) & (value)) << 20)
-#define AMAZON_EBU_BUSCON0_WAITINV                      (1 << 19)
-#define AMAZON_EBU_BUSCON0_SETUP                          (1 << 18)
-#define AMAZON_EBU_BUSCON0_PORTW(value)              (((( 1 << 2) - 1) & (value)) << 16)
-#define AMAZON_EBU_BUSCON0_WAITRDC(value)            (((( 1 << 7) - 1) & (value)) << 9)
-#define AMAZON_EBU_BUSCON0_WAITWRC(value)            (((( 1 << 3) - 1) & (value)) << 6)
-#define AMAZON_EBU_BUSCON0_HOLDC(value)              (((( 1 << 2) - 1) & (value)) << 4)
-#define AMAZON_EBU_BUSCON0_RECOVC(value)             (((( 1 << 2) - 1) & (value)) << 2)
-#define AMAZON_EBU_BUSCON0_CMULT(value)              (((( 1 << 2) - 1) & (value)) << 0)
-      
-/***EBU Bus Configuration Register 1***/ 
-#define AMAZON_EBU_BUSCON1                  ((volatile u32*)(AMAZON_EBU+ 0x0064))
-#define AMAZON_EBU_BUSCON1_WRDIS                          (1 << 31)
-#define AMAZON_EBU_BUSCON1_ALEC(value)               (((( 1 << 2) - 1) & (value)) << 29)
-#define AMAZON_EBU_BUSCON1_BCGEN(value)              (((( 1 << 2) - 1) & (value)) << 27)
-#define AMAZON_EBU_BUSCON1_AGEN(value)               (((( 1 << 2) - 1) & (value)) << 24)
-#define AMAZON_EBU_BUSCON1_CMULTR(value)             (((( 1 << 2) - 1) & (value)) << 22)
-#define AMAZON_EBU_BUSCON1_WAIT(value)               (((( 1 << 2) - 1) & (value)) << 20)
-#define AMAZON_EBU_BUSCON1_WAITINV                      (1 << 19)
-#define AMAZON_EBU_BUSCON1_SETUP                          (1 << 18)
-#define AMAZON_EBU_BUSCON1_PORTW(value)              (((( 1 << 2) - 1) & (value)) << 16)
-#define AMAZON_EBU_BUSCON1_WAITRDC(value)            (((( 1 << 7) - 1) & (value)) << 9)
-#define AMAZON_EBU_BUSCON1_WAITWRC(value)            (((( 1 << 3) - 1) & (value)) << 6)
-#define AMAZON_EBU_BUSCON1_HOLDC(value)              (((( 1 << 2) - 1) & (value)) << 4)
-#define AMAZON_EBU_BUSCON1_RECOVC(value)             (((( 1 << 2) - 1) & (value)) << 2)
-#define AMAZON_EBU_BUSCON1_CMULT(value)              (((( 1 << 2) - 1) & (value)) << 0)
-      
-/***EBU Bus Configuration Register 2***/ 
-#define AMAZON_EBU_BUSCON2                  ((volatile u32*)(AMAZON_EBU+ 0x0068))
-#define AMAZON_EBU_BUSCON2_WRDIS                          (1 << 31)
-#define AMAZON_EBU_BUSCON2_ALEC(value)               (((( 1 << 2) - 1) & (value)) << 29)
-#define AMAZON_EBU_BUSCON2_BCGEN(value)              (((( 1 << 2) - 1) & (value)) << 27)
-#define AMAZON_EBU_BUSCON2_AGEN(value)               (((( 1 << 2) - 1) & (value)) << 24)
-#define AMAZON_EBU_BUSCON2_CMULTR(value)             (((( 1 << 2) - 1) & (value)) << 22)
-#define AMAZON_EBU_BUSCON2_WAIT(value)               (((( 1 << 2) - 1) & (value)) << 20)
-#define AMAZON_EBU_BUSCON2_WAITINV                      (1 << 19)
-#define AMAZON_EBU_BUSCON2_SETUP                          (1 << 18)
-#define AMAZON_EBU_BUSCON2_PORTW(value)              (((( 1 << 2) - 1) & (value)) << 16)
-#define AMAZON_EBU_BUSCON2_WAITRDC(value)            (((( 1 << 7) - 1) & (value)) << 9)
-#define AMAZON_EBU_BUSCON2_WAITWRC(value)            (((( 1 << 3) - 1) & (value)) << 6)
-#define AMAZON_EBU_BUSCON2_HOLDC(value)              (((( 1 << 2) - 1) & (value)) << 4)
-#define AMAZON_EBU_BUSCON2_RECOVC(value)             (((( 1 << 2) - 1) & (value)) << 2)
-#define AMAZON_EBU_BUSCON2_CMULT(value)              (((( 1 << 2) - 1) & (value)) << 0)                
-         
-/***********************************************************************/
-/*  Module      :  SDRAM register address and bits                     */
-/***********************************************************************/
-         
-#define AMAZON_SDRAM                        (KSEG1+0x1F800000)
-/***********************************************************************/   
-
-      
-/***MC Access Error Cause Register***/ 
-#define AMAZON_SDRAM_MC_ERRCAUSE                  ((volatile u32*)(AMAZON_SDRAM+ 0x0010))
-#define AMAZON_SDRAM_MC_ERRCAUSE_ERR                              (1 << 31)
-#define AMAZON_SDRAM_MC_ERRCAUSE_PORT(value)               (((( 1 << 4) - 1) & (value)) << 16)
-#define AMAZON_SDRAM_MC_ERRCAUSE_CAUSE(value)              (((( 1 << 2) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_ERRCAUSE_Res(value)                (((( 1 << NaN) - 1) & (value)) << NaN)
-      
-/***MC Access Error Address Register***/ 
-#define AMAZON_SDRAM_MC_ERRADDR                   ((volatile u32*)(AMAZON_SDRAM+ 0x0020))
-#define AMAZON_SDRAM_MC_ERRADDR_ADDR
-      
-/***MC I/O General Purpose Register***/ 
-#define AMAZON_SDRAM_MC_IOGP                      ((volatile u32*)(AMAZON_SDRAM+ 0x0100))
-#define AMAZON_SDRAM_MC_IOGP_GPR6(value)               (((( 1 << 4) - 1) & (value)) << 28)
-#define AMAZON_SDRAM_MC_IOGP_GPR5(value)               (((( 1 << 4) - 1) & (value)) << 24)
-#define AMAZON_SDRAM_MC_IOGP_GPR4(value)               (((( 1 << 4) - 1) & (value)) << 20)
-#define AMAZON_SDRAM_MC_IOGP_GPR3(value)               (((( 1 << 4) - 1) & (value)) << 16)
-#define AMAZON_SDRAM_MC_IOGP_GPR2(value)               (((( 1 << 4) - 1) & (value)) << 12)
-#define AMAZON_SDRAM_MC_IOGP_CPS                              (1 << 11)
-#define AMAZON_SDRAM_MC_IOGP_CLKDELAY(value)          (((( 1 << 3) - 1) & (value)) << 8)
-#define AMAZON_SDRAM_MC_IOGP_CLKRAT(value)             (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_SDRAM_MC_IOGP_RDDEL(value)              (((( 1 << 4) - 1) & (value)) << 0)
-      
-/***MC Self Refresh Register***/ 
-#define AMAZON_SDRAM_MC_SELFRFSH                  ((volatile u32*)(AMAZON_SDRAM+ 0x01A0))
-#define AMAZON_SDRAM_MC_SELFRFSH_PWDS                            (1 << 1)
-#define AMAZON_SDRAM_MC_SELFRFSH_PWD                              (1 << 0)
-#define AMAZON_SDRAM_MC_SELFRFSH_Res(value)                (((( 1 << 30) - 1) & (value)) << 2)
-      
-/***MC Enable Register***/ 
-#define AMAZON_SDRAM_MC_CTRLENA                   ((volatile u32*)(AMAZON_SDRAM+ 0x0110))
-#define AMAZON_SDRAM_MC_CTRLENA_ENA                              (1 << 0)
-#define AMAZON_SDRAM_MC_CTRLENA_Res(value)                (((( 1 << 31) - 1) & (value)) << 1)
-      
-/***MC Mode Register Setup Code***/ 
-#define AMAZON_SDRAM_MC_MRSCODE                   ((volatile u32*)(AMAZON_SDRAM+ 0x0120))
-#define AMAZON_SDRAM_MC_MRSCODE_UMC(value)                (((( 1 << 5) - 1) & (value)) << 7)
-#define AMAZON_SDRAM_MC_MRSCODE_CL(value)                (((( 1 << 3) - 1) & (value)) << 4)
-#define AMAZON_SDRAM_MC_MRSCODE_WT                              (1 << 3)
-#define AMAZON_SDRAM_MC_MRSCODE_BL(value)                (((( 1 << 3) - 1) & (value)) << 0)
-      
-/***MC Configuration Data-word Width Register***/ 
-#define AMAZON_SDRAM_MC_CFGDW                    ((volatile u32*)(AMAZON_SDRAM+ 0x0130))
-#define AMAZON_SDRAM_MC_CFGDW_DW(value)                (((( 1 << 4) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_CFGDW_Res(value)                (((( 1 << 28) - 1) & (value)) << 4)
-      
-/***MC Configuration Physical Bank 0 Register***/ 
-#define AMAZON_SDRAM_MC_CFGPB0                    ((volatile u32*)(AMAZON_SDRAM+ 0x140))
-#define AMAZON_SDRAM_MC_CFGPB0_MCSEN0(value)             (((( 1 << 4) - 1) & (value)) << 12)
-#define AMAZON_SDRAM_MC_CFGPB0_BANKN0(value)             (((( 1 << 4) - 1) & (value)) << 8)
-#define AMAZON_SDRAM_MC_CFGPB0_ROWW0(value)              (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_SDRAM_MC_CFGPB0_COLW0(value)              (((( 1 << 4) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_CFGPB0_Res(value)                (((( 1 << 16) - 1) & (value)) << 16)
-      
-/***MC Latency Register***/ 
-#define AMAZON_SDRAM_MC_LATENCY                   ((volatile u32*)(AMAZON_SDRAM+ 0x0180))
-#define AMAZON_SDRAM_MC_LATENCY_TRP(value)                (((( 1 << 4) - 1) & (value)) << 16)
-#define AMAZON_SDRAM_MC_LATENCY_TRAS(value)               (((( 1 << 4) - 1) & (value)) << 12)
-#define AMAZON_SDRAM_MC_LATENCY_TRCD(value)               (((( 1 << 4) - 1) & (value)) << 8)
-#define AMAZON_SDRAM_MC_LATENCY_TDPL(value)               (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_SDRAM_MC_LATENCY_TDAL(value)               (((( 1 << 4) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_LATENCY_Res(value)                (((( 1 << 12) - 1) & (value)) << 20)
-      
-/***MC Refresh Cycle Time Register***/ 
-#define AMAZON_SDRAM_MC_TREFRESH                  ((volatile u32*)(AMAZON_SDRAM+ 0x0190))
-#define AMAZON_SDRAM_MC_TREFRESH_TREF(value)               (((( 1 << 13) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_TREFRESH_Res(value)                (((( 1 << 19) - 1) & (value)) << 13)                
-         
-/***********************************************************************/
-/*  Module      :  GPTU register address and bits                      */
-/***********************************************************************/
-         
-#define AMAZON_GPTU                         (KSEG1+0x10100A00)
-/***********************************************************************/   
-
-      
-/***GPT Clock Control Register***/ 
-#define AMAZON_GPTU_CLC                      ((volatile u32*)(AMAZON_GPTU+ 0x0000))
-#define AMAZON_GPTU_CLC_RMC(value)                (((( 1 << 8) - 1) & (value)) << 8)
-#define AMAZON_GPTU_CLC_DISS                            (1 << 1)
-#define AMAZON_GPTU_CLC_DISR                            (1 << 0)
-      
-/***GPT Timer 3 Control Register***/ 
-#define AMAZON_GPTU_T3CON                    ((volatile u32*)(AMAZON_GPTU+ 0x0014))
-#define AMAZON_GPTU_T3CON_T3RDIR                        (1 << 15)
-#define AMAZON_GPTU_T3CON_T3CHDIR                      (1 << 14)
-#define AMAZON_GPTU_T3CON_T3EDGE                        (1 << 13)
-#define AMAZON_GPTU_T3CON_BPS1(value)               (((( 1 << 2) - 1) & (value)) << 11)
-#define AMAZON_GPTU_T3CON_T3OTL                          (1 << 10)
-#define AMAZON_GPTU_T3CON_T3UD                            (1 << 7)
-#define AMAZON_GPTU_T3CON_T3R                              (1 << 6)
-#define AMAZON_GPTU_T3CON_T3M(value)                (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T3CON_T3I(value)                (((( 1 << 3) - 1) & (value)) << 0)
-      
-/***GPT Write Hardware Modified Timer 3 Control Register 
-If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define AMAZON_GPTU_WHBT3CON                 ((volatile u32*)(AMAZON_GPTU+ 0x004C))
-#define AMAZON_GPTU_WHBT3CON_SETT3CHDIR                (1 << 15)
-#define AMAZON_GPTU_WHBT3CON_CLRT3CHDIR                (1 << 14)
-#define AMAZON_GPTU_WHBT3CON_SETT3EDGE                  (1 << 13)
-#define AMAZON_GPTU_WHBT3CON_CLRT3EDGE                  (1 << 12)
-#define AMAZON_GPTU_WHBT3CON_SETT3OTL                  (1 << 11)
-#define AMAZON_GPTU_WHBT3CON_CLRT3OTL                  (1 << 10)
-      
-/***GPT Timer 2 Control Register***/ 
-#define AMAZON_GPTU_T2CON                    ((volatile u32*)(AMAZON_GPTU+ 0x0010))
-#define AMAZON_GPTU_T2CON_TxRDIR                        (1 << 15)
-#define AMAZON_GPTU_T2CON_TxCHDIR                      (1 << 14)
-#define AMAZON_GPTU_T2CON_TxEDGE                        (1 << 13)
-#define AMAZON_GPTU_T2CON_TxIRDIS                      (1 << 12)
-#define AMAZON_GPTU_T2CON_TxRC                            (1 << 9)
-#define AMAZON_GPTU_T2CON_TxUD                            (1 << 7)
-#define AMAZON_GPTU_T2CON_TxR                              (1 << 6)
-#define AMAZON_GPTU_T2CON_TxM(value)                (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T2CON_TxI(value)                (((( 1 << 3) - 1) & (value)) << 0)
-      
-/***GPT Timer 4 Control Register***/ 
-#define AMAZON_GPTU_T4CON                    ((volatile u32*)(AMAZON_GPTU+ 0x0018))
-#define AMAZON_GPTU_T4CON_TxRDIR                        (1 << 15)
-#define AMAZON_GPTU_T4CON_TxCHDIR                      (1 << 14)
-#define AMAZON_GPTU_T4CON_TxEDGE                        (1 << 13)
-#define AMAZON_GPTU_T4CON_TxIRDIS                      (1 << 12)
-#define AMAZON_GPTU_T4CON_TxRC                            (1 << 9)
-#define AMAZON_GPTU_T4CON_TxUD                            (1 << 7)
-#define AMAZON_GPTU_T4CON_TxR                              (1 << 6)
-#define AMAZON_GPTU_T4CON_TxM(value)                (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T4CON_TxI(value)                (((( 1 << 3) - 1) & (value)) << 0)
-      
-/***GPT Write HW Modified Timer 2 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define AMAZON_GPTU_WHBT2CON                 ((volatile u32*)(AMAZON_GPTU+ 0x0048))
-#define AMAZON_GPTU_WHBT2CON_SETTxCHDIR                (1 << 15)
-#define AMAZON_GPTU_WHBT2CON_CLRTxCHDIR                (1 << 14)
-#define AMAZON_GPTU_WHBT2CON_SETTxEDGE                  (1 << 13)
-#define AMAZON_GPTU_WHBT2CON_CLRTxEDGE                  (1 << 12)
-      
-/***GPT Write HW Modified Timer 4 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define AMAZON_GPTU_WHBT4CON                 ((volatile u32*)(AMAZON_GPTU+ 0x0050))
-#define AMAZON_GPTU_WHBT4CON_SETTxCHDIR                (1 << 15)
-#define AMAZON_GPTU_WHBT4CON_CLRTxCHDIR                (1 << 14)
-#define AMAZON_GPTU_WHBT4CON_SETTxEDGE                  (1 << 13)
-#define AMAZON_GPTU_WHBT4CON_CLRTxEDGE                  (1 << 12)
-      
-/***GPT Capture Reload Register***/ 
-#define AMAZON_GPTU_CAPREL                   ((volatile u32*)(AMAZON_GPTU+ 0x0030))
-#define AMAZON_GPTU_CAPREL_CAPREL(value)             (((( 1 << 16) - 1) & (value)) << 0)
-      
-/***GPT Timer 2 Register***/ 
-#define AMAZON_GPTU_T2                       ((volatile u32*)(AMAZON_GPTU+ 0x0034))
-#define AMAZON_GPTU_T2_TVAL(value)               (((( 1 << 16) - 1) & (value)) << 0)
-      
-/***GPT Timer 3 Register***/ 
-#define AMAZON_GPTU_T3                       ((volatile u32*)(AMAZON_GPTU+ 0x0038))
-#define AMAZON_GPTU_T3_TVAL(value)               (((( 1 << 16) - 1) & (value)) << 0)
-      
-/***GPT Timer 4 Register***/ 
-#define AMAZON_GPTU_T4                       ((volatile u32*)(AMAZON_GPTU+ 0x003C))
-#define AMAZON_GPTU_T4_TVAL(value)               (((( 1 << 16) - 1) & (value)) << 0)
-      
-/***GPT Timer 5 Register***/ 
-#define AMAZON_GPTU_T5                       ((volatile u32*)(AMAZON_GPTU+ 0x0040))
-#define AMAZON_GPTU_T5_TVAL(value)               (((( 1 << 16) - 1) & (value)) << 0)
-      
-/***GPT Timer 6 Register***/ 
-#define AMAZON_GPTU_T6                       ((volatile u32*)(AMAZON_GPTU+ 0x0044))
-#define AMAZON_GPTU_T6_TVAL(value)               (((( 1 << 16) - 1) & (value)) << 0)
-      
-/***GPT Timer 6 Control Register***/ 
-#define AMAZON_GPTU_T6CON                    ((volatile u32*)(AMAZON_GPTU+ 0x0020))
-#define AMAZON_GPTU_T6CON_T6SR                            (1 << 15)
-#define AMAZON_GPTU_T6CON_T6CLR                          (1 << 14)
-#define AMAZON_GPTU_T6CON_BPS2(value)               (((( 1 << 2) - 1) & (value)) << 11)
-#define AMAZON_GPTU_T6CON_T6OTL                          (1 << 10)
-#define AMAZON_GPTU_T6CON_T6UD                            (1 << 7)
-#define AMAZON_GPTU_T6CON_T6R                              (1 << 6)
-#define AMAZON_GPTU_T6CON_T6M(value)                (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T6CON_T6I(value)                (((( 1 << 3) - 1) & (value)) << 0)
-      
-/***GPT Write HW Modified Timer 6 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define AMAZON_GPTU_WHBT6CON                 ((volatile u32*)(AMAZON_GPTU+ 0x0054))
-#define AMAZON_GPTU_WHBT6CON_SETT6OTL                  (1 << 11)
-#define AMAZON_GPTU_WHBT6CON_CLRT6OTL                  (1 << 10)
-      
-/***GPT Timer 5 Control Register***/ 
-#define AMAZON_GPTU_T5CON                    ((volatile u32*)(AMAZON_GPTU+ 0x001C))
-#define AMAZON_GPTU_T5CON_T5SC                            (1 << 15)
-#define AMAZON_GPTU_T5CON_T5CLR                          (1 << 14)
-#define AMAZON_GPTU_T5CON_CI(value)                (((( 1 << 2) - 1) & (value)) << 12)
-#define AMAZON_GPTU_T5CON_T5CC                            (1 << 11)
-#define AMAZON_GPTU_T5CON_CT3                              (1 << 10)
-#define AMAZON_GPTU_T5CON_T5RC                            (1 << 9)
-#define AMAZON_GPTU_T5CON_T5UDE                          (1 << 8)
-#define AMAZON_GPTU_T5CON_T5UD                            (1 << 7)
-#define AMAZON_GPTU_T5CON_T5R                              (1 << 6)
-#define AMAZON_GPTU_T5CON_T5M(value)                (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T5CON_T5I(value)                (((( 1 << 3) - 1) & (value)) << 0)         
-         
-
-/***********************************************************************/
-/*  Module      :  ASC register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_ASC                          (KSEG1+0x10100400)
-/***********************************************************************/   
-
-      
-/***ASC Port Input Select Register***/ 
-#define AMAZON_ASC_PISEL                                       (AMAZON_ASC+ 0x0004)
-#define AMAZON_ASC_PISEL_RIS                           (1 << 0)
-      
-/***ASC Control Register***/ 
-#define AMAZON_ASC_CON                                         (AMAZON_ASC+ 0x0010)
-#define AMAZON_ASC_CON_R                                       (1 << 15)
-#define AMAZON_ASC_CON_LB                                      (1 << 14)
-#define AMAZON_ASC_CON_BRS                                     (1 << 13)
-#define AMAZON_ASC_CON_ODD                                     (1 << 12)
-#define AMAZON_ASC_CON_FDE                                     (1 << 11)
-#define AMAZON_ASC_CON_OE                                      (1 << 10)
-#define AMAZON_ASC_CON_FE                                      (1 << 9)
-#define AMAZON_ASC_CON_PE                                      (1 << 8)
-#define AMAZON_ASC_CON_OEN                                     (1 << 7)
-#define AMAZON_ASC_CON_FEN                                     (1 << 6)
-#define AMAZON_ASC_CON_PENRXDI                         (1 << 5)
-#define AMAZON_ASC_CON_REN                                     (1 << 4)
-#define AMAZON_ASC_CON_STP                                     (1 << 3)
-#define AMAZON_ASC_CON_M(value)                                (((( 1 << 3) - 1) & (value)) << 0)
-/***ASC Write Hardware Modified Control Register***/ 
-#define AMAZON_ASC_WHBCON                                      (AMAZON_ASC+ 0x0050)
-#define AMAZON_ASC_WHBCON_SETOE                                (1 << 13)
-#define AMAZON_ASC_WHBCON_SETFE                                (1 << 12)
-#define AMAZON_ASC_WHBCON_SETPE                                (1 << 11)
-#define AMAZON_ASC_WHBCON_CLROE                                (1 << 10)
-#define AMAZON_ASC_WHBCON_CLRFE                                (1 << 9)
-#define AMAZON_ASC_WHBCON_CLRPE                                (1 << 8)
-#define AMAZON_ASC_WHBCON_SETREN                       (1 << 5)
-#define AMAZON_ASC_WHBCON_CLRREN                       (1 << 4)
-      
-/***ASC Baudrate Timer/Reload Register***/ 
-#define AMAZON_ASC_BTR                                         (AMAZON_ASC+ 0x0014)
-#define AMAZON_ASC_BTR_BR_VALUE(value)         (((( 1 << 13) - 1) & (value)) << 0)
-      
-/***ASC Fractional Divider Register***/ 
-#define AMAZON_ASC_FDV                                         (AMAZON_ASC+ 0x0018)
-#define AMAZON_ASC_FDV_FD_VALUE(value)         (((( 1 << 9) - 1) & (value)) << 0)
-      
-/***ASC IrDA Pulse Mode/Width Register***/ 
-#define AMAZON_ASC_PMW                                         (AMAZON_ASC+ 0x001C)
-#define AMAZON_ASC_PMW_IRPW                                    (1 << 8)
-#define AMAZON_ASC_PMW_PW_VALUE(value)         (((( 1 << 8) - 1) & (value)) << 0)
-      
-/***ASC Transmit Buffer Register***/ 
-#define AMAZON_ASC_TBUF                                                (AMAZON_ASC+ 0x0020)
-#define AMAZON_ASC_TBUF_TD_VALUE(value)                (((( 1 << 9) - 1) & (value)) << 0)
-      
-/***ASC Receive Buffer Register***/ 
-#define AMAZON_ASC_RBUF                                                (AMAZON_ASC+ 0x0024)
-#define AMAZON_ASC_RBUF_RD_VALUE(value)                (((( 1 << 9) - 1) & (value)) << 0)
-      
-/***ASC Autobaud Control Register***/ 
-#define AMAZON_ASC_ABCON                                       (AMAZON_ASC+ 0x0030)
-#define AMAZON_ASC_ABCON_RXINV                         (1 << 11)
-#define AMAZON_ASC_ABCON_TXINV                         (1 << 10)
-#define AMAZON_ASC_ABCON_ABEM(value)           (((( 1 << 2) - 1) & (value)) << 8)
-#define AMAZON_ASC_ABCON_FCDETEN                       (1 << 4)
-#define AMAZON_ASC_ABCON_ABDETEN                       (1 << 3)
-#define AMAZON_ASC_ABCON_ABSTEN                                (1 << 2)
-#define AMAZON_ASC_ABCON_AUREN                         (1 << 1)
-#define AMAZON_ASC_ABCON_ABEN                          (1 << 0)
-      
-/***Receive FIFO Control Register***/ 
-#define AMAZON_ASC_RXFCON                                      (AMAZON_ASC+ 0x0040)
-#define AMAZON_ASC_RXFCON_RXFITL(value)                (((( 1 << 6) - 1) & (value)) << 8)
-#define AMAZON_ASC_RXFCON_RXTMEN                       (1 << 2)
-#define AMAZON_ASC_RXFCON_RXFFLU                       (1 << 1)
-#define AMAZON_ASC_RXFCON_RXFEN                                (1 << 0)
-      
-/***Transmit FIFO Control Register***/ 
-#define AMAZON_ASC_TXFCON                                      (AMAZON_ASC+ 0x0044)
-#define AMAZON_ASC_TXFCON_TXFITL(value)                (((( 1 << 6) - 1) & (value)) << 8)
-#define AMAZON_ASC_TXFCON_TXTMEN                       (1 << 2)
-#define AMAZON_ASC_TXFCON_TXFFLU                       (1 << 1)
-#define AMAZON_ASC_TXFCON_TXFEN                                (1 << 0)
-      
-/***FIFO Status Register***/ 
-#define AMAZON_ASC_FSTAT                                       (AMAZON_ASC+ 0x0048)
-#define AMAZON_ASC_FSTAT_TXFFL(value)          (((( 1 << 6) - 1) & (value)) << 8)
-#define AMAZON_ASC_FSTAT_RXFFL(value)          (((( 1 << 6) - 1) & (value)) << 0)
-      
-/***ASC Write HW Modified Autobaud Control Register***/ 
-#define AMAZON_ASC_WHBABCON                                    (AMAZON_ASC+ 0x0054)
-#define AMAZON_ASC_WHBABCON_SETABEN                    (1 << 1)
-#define AMAZON_ASC_WHBABCON_CLRABEN                    (1 << 0)
-      
-/***ASC Autobaud Status Register***/ 
-#define AMAZON_ASC_ABSTAT                                      (AMAZON_ASC+ 0x0034)
-#define AMAZON_ASC_ABSTAT_DETWAIT                      (1 << 4)
-#define AMAZON_ASC_ABSTAT_SCCDET                       (1 << 3)
-#define AMAZON_ASC_ABSTAT_SCSDET                       (1 << 2)
-#define AMAZON_ASC_ABSTAT_FCCDET                       (1 << 1)
-#define AMAZON_ASC_ABSTAT_FCSDET                       (1 << 0)
-      
-/***ASC Write HW Modified Autobaud Status Register***/ 
-#define AMAZON_ASC_WHBABSTAT                           (AMAZON_ASC+ 0x0058)
-#define AMAZON_ASC_WHBABSTAT_SETDETWAIT                (1 << 9)
-#define AMAZON_ASC_WHBABSTAT_CLRDETWAIT                (1 << 8)
-#define AMAZON_ASC_WHBABSTAT_SETSCCDET         (1 << 7)
-#define AMAZON_ASC_WHBABSTAT_CLRSCCDET         (1 << 6)
-#define AMAZON_ASC_WHBABSTAT_SETSCSDET         (1 << 5)
-#define AMAZON_ASC_WHBABSTAT_CLRSCSDET         (1 << 4)
-#define AMAZON_ASC_WHBABSTAT_SETFCCDET         (1 << 3)
-#define AMAZON_ASC_WHBABSTAT_CLRFCCDET         (1 << 2)
-#define AMAZON_ASC_WHBABSTAT_SETFCSDET         (1 << 1)
-#define AMAZON_ASC_WHBABSTAT_CLRFCSDET         (1 << 0)
-      
-/***ASC Clock Control Register***/ 
-#define AMAZON_ASC_CLC                                         (AMAZON_ASC+ 0x0000)
-#define AMAZON_ASC_CLC_RMC(value)                      (((( 1 << 8) - 1) & (value)) << 8)
-#define AMAZON_ASC_CLC_DISS                                    (1 << 1)
-#define AMAZON_ASC_CLC_DISR                                    (1 << 0)                
-
-/***ASC IRNCR0 **/
-#define AMAZON_ASC_IRNCR0                                      (AMAZON_ASC+ 0x00FC)
-/***ASC IRNCR1 **/
-#define AMAZON_ASC_IRNCR1                                      (AMAZON_ASC+ 0x00F8)
-#define ASC_IRNCR_TIR  0x1
-#define ASC_IRNCR_RIR  0x2
-#define ASC_IRNCR_EIR  0x4
-/***********************************************************************/
-/*  Module      :  DMA register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_DMA                             (KSEG1+0x10103000)
-/***********************************************************************/   
-#define AMAZON_DMA_CH_ON               AMAZON_DMA+0x28
-#define AMAZON_DMA_CH_RST                      AMAZON_DMA+0x2c
-#define AMAZON_DMA_CH0_ISR             AMAZON_DMA+0x30
-#define AMAZON_DMA_CH1_ISR             AMAZON_DMA+0x34
-#define AMAZON_DMA_CH2_ISR             AMAZON_DMA+0x38
-#define AMAZON_DMA_CH3_ISR                     AMAZON_DMA+0x3c
-#define AMAZON_DMA_CH4_ISR             AMAZON_DMA+0x40
-#define AMAZON_DMA_CH5_ISR             AMAZON_DMA+0x44
-#define AMAZON_DMA_CH6_ISR             AMAZON_DMA+0x48
-#define AMAZON_DMA_CH7_ISR             AMAZON_DMA+0x4c
-#define AMAZON_DMA_CH8_ISR             AMAZON_DMA+0x50
-#define AMAZON_DMA_CH9_ISR             AMAZON_DMA+0x54
-#define AMAZON_DMA_CH10_ISR            AMAZON_DMA+0x58
-#define AMAZON_DMA_CH11_ISR            AMAZON_DMA+0x5c
-#define AMAZON_DMA_CH0_MSK             AMAZON_DMA+0x60
-#define AMAZON_DMA_CH1_MSK             AMAZON_DMA+0x64
-#define AMAZON_DMA_CH2_MSK                     AMAZON_DMA+0x68
-#define AMAZON_DMA_CH3_MSK             AMAZON_DMA+0x6c
-#define AMAZON_DMA_CH4_MSK             AMAZON_DMA+0x70
-#define AMAZON_DMA_CH5_MSK             AMAZON_DMA+0x74
-#define AMAZON_DMA_CH6_MSK             AMAZON_DMA+0x78
-#define AMAZON_DMA_CH7_MSK             AMAZON_DMA+0x7c
-#define AMAZON_DMA_CH8_MSK             AMAZON_DMA+0x80
-#define AMAZON_DMA_CH9_MSK             AMAZON_DMA+0x84
-#define AMAZON_DMA_CH10_MSK            AMAZON_DMA+0x88
-#define AMAZON_DMA_CH11_MSK            AMAZON_DMA+0x8c
-#define AMAZON_DMA_Desc_BA             AMAZON_DMA+0x90
-#define AMAZON_DMA_CH0_DES_LEN         AMAZON_DMA+0x94
-#define AMAZON_DMA_CH1_DES_LEN         AMAZON_DMA+0x98
-#define AMAZON_DMA_CH2_DES_LEN         AMAZON_DMA+0x9c
-#define AMAZON_DMA_CH3_DES_LEN         AMAZON_DMA+0xa0
-#define AMAZON_DMA_CH4_DES_LEN         AMAZON_DMA+0xa4
-#define AMAZON_DMA_CH5_DES_LEN         AMAZON_DMA+0xa8
-#define AMAZON_DMA_CH6_DES_LEN         AMAZON_DMA+0xac
-#define AMAZON_DMA_CH7_DES_LEN         AMAZON_DMA+0xb0
-#define AMAZON_DMA_CH8_DES_LEN         AMAZON_DMA+0xb4
-#define AMAZON_DMA_CH9_DES_LEN         AMAZON_DMA+0xb8
-#define AMAZON_DMA_CH10_DES_LEN        AMAZON_DMA+0xbc
-#define AMAZON_DMA_CH11_DES_LEN        AMAZON_DMA+0xc0
-#define AMAZON_DMA_CH1_DES_OFST        AMAZON_DMA+0xc4
-#define AMAZON_DMA_CH2_DES_OFST        AMAZON_DMA+0xc8
-#define AMAZON_DMA_CH3_DES_OFST        AMAZON_DMA+0xcc
-#define AMAZON_DMA_CH4_DES_OFST        AMAZON_DMA+0xd0
-#define AMAZON_DMA_CH5_DES_OFST        AMAZON_DMA+0xd4
-#define AMAZON_DMA_CH6_DES_OFST        AMAZON_DMA+0xd8
-#define AMAZON_DMA_CH7_DES_OFST        AMAZON_DMA+0xdc
-#define AMAZON_DMA_CH8_DES_OFST        AMAZON_DMA+0xe0
-#define AMAZON_DMA_CH9_DES_OFST        AMAZON_DMA+0xe4
-#define AMAZON_DMA_CH10_DES_OFST       AMAZON_DMA+0xe8
-#define AMAZON_DMA_CH11_DES_OFST       AMAZON_DMA+0xec
-#define AMAZON_DMA_SW_BL               AMAZON_DMA+0xf0
-#define AMAZON_DMA_TPE_BL              AMAZON_DMA+0xf4
-#define AMAZON_DMA_DPlus2FPI_BL        AMAZON_DMA+0xf8
-#define AMAZON_DMA_GRX_BUF_LEN         AMAZON_DMA+0xfc
-#define AMAZON_DMA_DMA_ECON_REG        AMAZON_DMA+0x100
-#define AMAZON_DMA_POLLING_REG         AMAZON_DMA+0x104
-#define AMAZON_DMA_CH_WGT              AMAZON_DMA+0x108
-#define AMAZON_DMA_TX_WGT              AMAZON_DMA+0x10c
-#define AMAZON_DMA_DPLus2FPI_CLASS     AMAZON_DMA+0x110
-#define AMAZON_DMA_COMB_ISR            AMAZON_DMA+0x114
-
-//channel reset
-#define SWITCH1_RST_MASK       0x83    /* Switch1 channel mask */
-#define SWITCH2_RST_MASK       0x10C   /* Switch1 channel mask */
-#define TPE_RST_MASK           0x630   /* TPE channel mask */
-#define DPlus2FPI_RST_MASK     0x840   /*  DPlusFPI channel mask */
-
-//ISR
-#define DMA_ISR_RDERR                  0x20
-#define DMA_ISR_CMDCPT                 0x10
-#define DMA_ISR_CPT                    0x8
-#define DMA_ISR_DURR                   0x4
-#define DMA_ISR_EOP                    0x2
-#define DMA_DESC_BYTEOFF_SHIFT         23
-
-#define DMA_POLLING_ENABLE             0x80000000
-#define DMA_POLLING_CNT                        0x50    /*minimum 0x10, max 0xfff0*/
-
-/***********************************************************************/
-/*  Module      :  Debug register address and bits                     */
-/***********************************************************************/
-         
-#define AMAZON_DEBUG                        (KSEG1+0x1F106000)
-/***********************************************************************/   
-
-      
-/***MCD Break System Control Register***/ 
-#define AMAZON_DEBUG_MCD_BSCR                          ((volatile u32*)(AMAZON_DEBUG+ 0x0000))
-
-/***PMC Performance Counter Control Register0***/
-#define AMAZON_DEBUG_PMC_PCCR0                          ((volatile u32*)(AMAZON_DEBUG+ 0x0010))
-
-/***PMC Performance Counter Control Register1***/
-#define AMAZON_DEBUG_PMC_PCCR1                          ((volatile u32*)(AMAZON_DEBUG+ 0x0014))
-
-/***PMC Performance Counter Register0***/
-#define AMAZON_DEBUG_PMC_PCR0                                  ((volatile u32*)(AMAZON_DEBUG+ 0x0018))
-
-/*165001:henryhsu:20050603:Source modified by Bing Tao*/
-
-/***PMC Performance Counter Register1***/
-//#define AMAZON_DEBUG_PMC_PCR1                          ((volatile u32*)(AMAZON_DEBUG+ 0x0020))
-#define AMAZON_DEBUG_PMC_PCR1                            ((volatile u32*)(AMAZON_DEBUG+ 0x001c))
-
-/*165001*/
-
-
-
-/***MCD Suspend Mode Control Register***/
-#define AMAZON_DEBUG_MCD_SMCR                           ((volatile u32*)(AMAZON_DEBUG+ 0x0024))
-
-/***********************************************************************/
-/*  Module      :  GPIO register address and bits                     */
-/***********************************************************************/
-         
-#define AMAZON_GPIO                        (KSEG1+0x10100B00)
-/***********************************************************************/   
-
-      
-/***Port 0 Data Output Register (0010H)***/ 
-#define AMAZON_GPIO_P0_OUT                       ((volatile u32*)(AMAZON_GPIO+ 0x0010))                      
-      
-/***Port 1 Data Output Register (0040H)***/ 
-#define AMAZON_GPIO_P1_OUT                       ((volatile u32*)(AMAZON_GPIO+ 0x0040))                      
-      
-/***Port 0 Data Input Register (0014H)***/ 
-#define AMAZON_GPIO_P0_IN                        ((volatile u32*)(AMAZON_GPIO+ 0x0014))                      
-      
-/***Port 1 Data Input Register (0044H)***/ 
-#define AMAZON_GPIO_P1_IN                        ((volatile u32*)(AMAZON_GPIO+ 0x0044))
-                            
-/***Port 0 Direction Register (0018H)***/ 
-#define AMAZON_GPIO_P0_DIR                       ((volatile u32*)(AMAZON_GPIO+ 0x0018))
-      
-/***Port 1 Direction Register (0048H)***/ 
-#define AMAZON_GPIO_P1_DIR                       ((volatile u32*)(AMAZON_GPIO+ 0x0048))
-      
-/***Port 0 Alternate Function Select Register 0 (001C H) ***/
-#define AMAZON_GPIO_P0_ALTSEL0                    ((volatile u32*)(AMAZON_GPIO+ 0x001C))                      
-      
-/***Port 1 Alternate Function Select Register 0 (004C H) ***/
-#define AMAZON_GPIO_P1_ALTSEL0                    ((volatile u32*)(AMAZON_GPIO+ 0x004C))
-                      
-/***Port 0 Alternate Function Select Register 1 (0020 H) ***/
-#define AMAZON_GPIO_P0_ALTSEL1                    ((volatile u32*)(AMAZON_GPIO+ 0x0020))
-      
-/***Port 1 Alternate Function Select Register 0 (0050 H) ***/
-#define AMAZON_GPIO_P1_ALTSEL1                    ((volatile u32*)(AMAZON_GPIO+ 0x0050))
-      
-/***Port 0 Open Drain Control Register (0024H)***/ 
-#define AMAZON_GPIO_P0_OD                        ((volatile u32*)(AMAZON_GPIO+ 0x0024))                      
-      
-/***Port 1 Open Drain Control Register (0054H)***/ 
-#define AMAZON_GPIO_P1_OD                        ((volatile u32*)(AMAZON_GPIO+ 0x0054))
-                      
-/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/
-#define AMAZON_GPIO_P0_STOFF                    ((volatile u32*)(AMAZON_GPIO+ 0x0028))
-      
-/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/
-#define AMAZON_GPIO_P1_STOFF                    ((volatile u32*)(AMAZON_GPIO+ 0x0058))
-                      
-/***Port 0 Pull Up/Pull Down Select Register (002C H)***/ 
-#define AMAZON_GPIO_P0_PUDSEL                    ((volatile u32*)(AMAZON_GPIO+ 0x002C))
-                      
-/***Port 1 Pull Up/Pull Down Select Register (005C H)***/ 
-#define AMAZON_GPIO_P1_PUDSEL                    ((volatile u32*)(AMAZON_GPIO+ 0x005C))
-                      
-/***Port 0 Pull Up Device Enable Register (0030 H)***/ 
-#define AMAZON_GPIO_P0_PUDEN                    ((volatile u32*)(AMAZON_GPIO+ 0x0030))
-                      
-/***Port 1 Pull Up Device Enable Register (0060 H)***/ 
-#define AMAZON_GPIO_P1_PUDEN                    ((volatile u32*)(AMAZON_GPIO+ 0x0060))
-                                                                         
-/***********************************************************************/
-/*  Module      :  BIU register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_BIU                          (KSEG1+0x1FA80000)
-/***********************************************************************/   
-
-      
-/***BIU Identification Register***/ 
-#define AMAZON_BIU_ID                       ((volatile u32*)(AMAZON_BIU+ 0x0000))
-#define AMAZON_BIU_ID_ARCH                            (1 << 16)
-#define AMAZON_BIU_ID_ID(value)                (((( 1 << 8) - 1) & (value)) << 8)
-#define AMAZON_BIU_ID_REV(value)                (((( 1 << 8) - 1) & (value)) << 0)
-      
-/***BIU Access Error Cause Register***/ 
-#define AMAZON_BIU_ERRCAUSE                 ((volatile u32*)(AMAZON_BIU+ 0x0100))
-#define AMAZON_BIU_ERRCAUSE_ERR                              (1 << 31)
-#define AMAZON_BIU_ERRCAUSE_PORT(value)               (((( 1 << 4) - 1) & (value)) << 16)
-#define AMAZON_BIU_ERRCAUSE_CAUSE(value)              (((( 1 << 2) - 1) & (value)) << 0)
-      
-/***BIU Access Error Address Register***/ 
-#define AMAZON_BIU_ERRADDR                  ((volatile u32*)(AMAZON_BIU+ 0x0108))
-#define AMAZON_BIU_ERRADDR_ADDR                
-         
-/***********************************************************************/
-/*  Module      :  ICU register address and bits                       */
-/***********************************************************************/
-         
-#define AMAZON_ICU                                                             (KSEG1+0x1F101000)
-/***********************************************************************/   
-
-/***IM0 Interrupt Status Register***/ 
-#define AMAZON_ICU_IM0_ISR                                             (AMAZON_ICU + 0x0010)
-#define AMAZON_ICU_IM1_ISR                                             (AMAZON_ICU + 0x0020)
-#define AMAZON_ICU_IM2_ISR                                             (AMAZON_ICU + 0x0030)
-#define AMAZON_ICU_IM3_ISR                                             (AMAZON_ICU + 0x0040)
-#define AMAZON_ICU_IM4_ISR                                             (AMAZON_ICU + 0x0050)
-                       
-/***IM0 Interrupt Enable Register***/ 
-#define AMAZON_ICU_IM0_IER                                             (AMAZON_ICU + 0x0014)
-#define AMAZON_ICU_IM1_IER                                             (AMAZON_ICU + 0x0024)
-#define AMAZON_ICU_IM2_IER                                             (AMAZON_ICU + 0x0034)
-#define AMAZON_ICU_IM3_IER                                             (AMAZON_ICU + 0x0044)
-#define AMAZON_ICU_IM4_IER                                             (AMAZON_ICU + 0x0054)
-
-/***IM0 Interrupt Output Status Register***/ 
-#define AMAZON_ICU_IM0_IOSR                                            (AMAZON_ICU + 0x0018)
-#define AMAZON_ICU_IM1_IOSR                                            (AMAZON_ICU + 0x0028)
-#define AMAZON_ICU_IM2_IOSR                                            (AMAZON_ICU + 0x0038)
-#define AMAZON_ICU_IM3_IOSR                                            (AMAZON_ICU + 0x0048)
-#define AMAZON_ICU_IM4_IOSR                                            (AMAZON_ICU + 0x0058)
-
-/***IM0 Interrupt Request Set Register***/ 
-#define AMAZON_ICU_IM0_IRSR                                            (AMAZON_ICU + 0x001c)
-#define AMAZON_ICU_IM1_IRSR                                            (AMAZON_ICU + 0x002c)
-#define AMAZON_ICU_IM2_IRSR                                            (AMAZON_ICU + 0x003c)
-#define AMAZON_ICU_IM3_IRSR                                            (AMAZON_ICU + 0x004c)
-#define AMAZON_ICU_IM4_IRSR                                            (AMAZON_ICU + 0x005c)
-
-/***Interrupt Vector Value Register***/
-#define AMAZON_ICU_IM_VEC                                              (AMAZON_ICU + 0x0060)
-
-/***Interrupt Vector Value Mask***/
-#define AMAZON_ICU_IM0_VEC_MASK                                        0x0000001f
-#define AMAZON_ICU_IM1_VEC_MASK                                        0x000003e0
-#define AMAZON_ICU_IM2_VEC_MASK                                        0x00007c00
-#define AMAZON_ICU_IM3_VEC_MASK                                        0x000f8000
-#define AMAZON_ICU_IM4_VEC_MASK                                        0x01f00000
-
-/***DMA Interrupt Mask Value***/
-#define AMAZON_DMA_H_MASK                                              0x00000fff
-                                                                                       
-/***External Interrupt Control Register***/
-#define AMAZON_ICU_EXTINTCR                                            ((volatile u32*)(AMAZON_ICU + 0x0000))
-#define AMAZON_ICU_IRNICR                                              ((volatile u32*)(AMAZON_ICU + 0x0004))  
-#define AMAZON_ICU_IRNCR                                               ((volatile u32*)(AMAZON_ICU + 0x0008))  
-#define AMAZON_ICU_IRNEN                                               ((volatile u32*)(AMAZON_ICU + 0x000c))
-
-/***********************************************************************/
-/*  Module      :   PCI/Card-BUS/PC-Card register address and bits     */
-/***********************************************************************/
-         
-#define AMAZON_PCI                             (KSEG1+0x10105400)
-#define AMAZON_PCI_CFG_BASE                    (KSEG1+0x11000000)
-#define AMAZON_PCI_MEM_BASE                    (KSEG1+0x12000000)
-
-#define CLOCK_CONTROL                          AMAZON_PCI + 0x00000000
-#define ARB_CTRL_bit                           1
-#define IDENTIFICATION                                 AMAZON_PCI + 0x00000004
-#define SOFTRESET                              AMAZON_PCI + 0x00000010
-#define PCI_FPI_ERROR_ADDRESS                  AMAZON_PCI + 0x00000014
-#define FPI_PCI_ERROR_ADDRESS                  AMAZON_PCI + 0x00000018
-#define FPI_ERROR_TAG                          AMAZON_PCI + 0x0000001c
-#define IRR                                    AMAZON_PCI + 0x00000020
-#define IRA_IR                                 AMAZON_PCI + 0x00000024
-#define IRM                                    AMAZON_PCI + 0x00000028
-#define DMA_COMPLETE_BIT                       0
-#define PCI_POWER_CHANGE_BIT                   16
-#define PCI_MASTER0_BROKEN_INT_BIT             24
-#define PCI_MASTER1_BROKEN_INT_BIT             25
-#define PCI_MASTER2_BROKEN_INT_BIT             26
-#define EOI                                    AMAZON_PCI + 0x0000002c
-#define PCI_MODE                               AMAZON_PCI + 0x00000030
-#define PCI_MODE_cfgok_bit                     24
-#define DEVICE_VENDOR_ID                       AMAZON_PCI + 0x00000034
-#define SUBSYSTEM_VENDOR_ID                    AMAZON_PCI + 0x00000038
-#define POWER_MANAGEMENT                       AMAZON_PCI + 0x0000003c
-#define CLASS_CODE1                            AMAZON_PCI + 0x00000040
-#define BAR11_MASK                             AMAZON_PCI + 0x00000044
-#define BAR12_MASK                             AMAZON_PCI + 0x00000048
-#define BAR13_MASK                             AMAZON_PCI + 0x0000004c
-#define BAR14_MASK                             AMAZON_PCI + 0x00000050
-#define BAR15_MASK                             AMAZON_PCI + 0x00000054
-#define BAR16_MASK                             AMAZON_PCI + 0x00000058
-#define CARDBUS_CIS_POINTER1                   AMAZON_PCI + 0x0000005c
-#define SUBSYSTEM_ID1                                  AMAZON_PCI + 0x00000060
-#define PCI_ADDRESS_MAP_11                     AMAZON_PCI + 0x00000064
-#define PCI_ADDRESS_MAP_12                     AMAZON_PCI + 0x00000068
-#define PCI_ADDRESS_MAP_13                     AMAZON_PCI + 0x0000006c
-#define PCI_ADDRESS_MAP_14                     AMAZON_PCI + 0x00000070
-#define PCI_ADDRESS_MAP_15                     AMAZON_PCI + 0x00000074
-#define PCI_ADDRESS_MAP_16                     AMAZON_PCI + 0x00000078
-#define FPI_SEGMENT_ENABLE                             AMAZON_PCI + 0x0000007c
-#define CLASS_CODE2                            AMAZON_PCI + 0x00000080
-#define BAR21_MASK                             AMAZON_PCI + 0x00000084
-#define BAR22_MASK                             AMAZON_PCI + 0x00000088
-#define BAR23_MASK                             AMAZON_PCI + 0x0000008c
-#define BAR24_MASK                             AMAZON_PCI + 0x00000090
-#define BAR25_MASK                             AMAZON_PCI + 0x00000094
-#define BAR26_MASK                             AMAZON_PCI + 0x00000098
-#define CARDBUS_CIS_POINTER2                   AMAZON_PCI + 0x0000009c
-#define SUBSYSTEM_ID2                          AMAZON_PCI + 0x000000a0
-#define PCI_ADDRESS_MAP_21                     AMAZON_PCI + 0x000000a4
-#define PCI_ADDRESS_MAP_22                     AMAZON_PCI + 0x000000a8
-#define PCI_ADDRESS_MAP_23                     AMAZON_PCI + 0x000000ac
-#define PCI_ADDRESS_MAP_24                     AMAZON_PCI + 0x000000b0
-#define PCI_ADDRESS_MAP_25                     AMAZON_PCI + 0x000000b4
-#define PCI_ADDRESS_MAP_26                     AMAZON_PCI + 0x000000b8
-#define FPI_ADDRESS_MASK11LOW                  AMAZON_PCI + 0x000000bc
-#define FPI_ADDRESS_MAP_0                      AMAZON_PCI + 0x000000c0
-#define FPI_ADDRESS_MAP_1                      AMAZON_PCI + 0x000000c4
-#define FPI_ADDRESS_MAP_2                      AMAZON_PCI + 0x000000c8
-#define FPI_ADDRESS_MAP_3                      AMAZON_PCI + 0x000000cc
-#define FPI_ADDRESS_MAP_4                      AMAZON_PCI + 0x000000d0
-#define FPI_ADDRESS_MAP_5                      AMAZON_PCI + 0x000000d4
-#define FPI_ADDRESS_MAP_6                      AMAZON_PCI + 0x000000d8
-#define FPI_ADDRESS_MAP_7                      AMAZON_PCI + 0x000000dc
-#define FPI_ADDRESS_MAP_11LOW                  AMAZON_PCI + 0x000000e0
-#define FPI_ADDRESS_MAP_11HIGH                 AMAZON_PCI + 0x000000e4
-#define FPI_BURST_LENGTH                       AMAZON_PCI + 0x000000e8
-#define SET_PCI_SERR                           AMAZON_PCI + 0x000000ec
-#define DMA_FPI_START_ADDR                     AMAZON_PCI + 0x000000f0
-#define DMA_PCI_START_ADDR                     AMAZON_PCI + 0x000000f4
-#define DMA_TRANSFER_COUNT                     AMAZON_PCI + 0x000000f8
-#define DMA_CONTROL_STATUS                     AMAZON_PCI + 0x000000fc
-
-#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x0800
-#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x1000
-#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x1800
-#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x2000
-#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x2800
-#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x3000
-#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x3800
-#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x4000
-#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR        AMAZON_PCI_CFG_BASE + 0x4800
-#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR       AMAZON_PCI_CFG_BASE + 0x5000
-#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR       AMAZON_PCI_CFG_BASE + 0x5800
-#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR       AMAZON_PCI_CFG_BASE + 0x6000
-#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR       AMAZON_PCI_CFG_BASE + 0x6800
-#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR       AMAZON_PCI_CFG_BASE + 0x7000
-#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR       AMAZON_PCI_CFG_BASE + 0x7800
-#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR     AMAZON_PCI_CFG_BASE + 0XF000
-#define EXT_PCI_BAR1_ADDR                      0x10
-#define EXT_PCI_BAR2_ADDR                      0x14
-#define EXT_PCI_BAR3_ADDR                      0x18
-#define EXT_PCI_BAR4_ADDR                      0x1C
-#define EXT_PCI_BAR5_ADDR                      0x20
-#define EXT_PCI_BAR6_ADDR                      0x24
-                                                                                                             
-#define DEVICE_ID_VECDOR_ID_ADDR               AMAZON_PCI_CFG_BASE + 0x0
-#define STATUS_COMMAND_ADDR                    AMAZON_PCI_CFG_BASE + 0x4
-#define BUS_MASTER_ENABLE_BIT                  2
-#define MEM_SPACE_ENABLE_BIT                   1
-#define CLASS_CODE_REVISION_ADDR               AMAZON_PCI_CFG_BASE + 0x8
-#define BIST_HEADER_TYPE_LATENCY_CAHCE_ADDR    AMAZON_PCI_CFG_BASE + 0xC
-#define BAR1_ADDR                              AMAZON_PCI_CFG_BASE + 0x10
-#define BAR2_ADDR                              AMAZON_PCI_CFG_BASE + 0x14
-#define BAR3_ADDR                              AMAZON_PCI_CFG_BASE + 0x18
-#define BAR4_ADDR                              AMAZON_PCI_CFG_BASE + 0x1C
-#define BAR3_ADDR                              AMAZON_PCI_CFG_BASE + 0x18
-#define BAR4_ADDR                              AMAZON_PCI_CFG_BASE + 0x1C
-#define BAR5_ADDR                              AMAZON_PCI_CFG_BASE + 0x20
-#define BAR6_ADDR                              AMAZON_PCI_CFG_BASE + 0x24
-#define CARDBUS_CIS_POINTER_ADDR               AMAZON_PCI_CFG_BASE + 0x28
-#define SUBSYSTEM_ID_VENDOR_ID_ADDR            AMAZON_PCI_CFG_BASE + 0x2C
-#define EXPANSION_ROM_BASE_ADDR                AMAZON_PCI_CFG_BASE + 0x30
-#define CAPABILITIES_POINTER_ADDR              AMAZON_PCI_CFG_BASE + 0x34
-#define RESERVED_0x38                          AMAZON_PCI_CFG_BASE + 0x38
-#define MAX_LAT_MIN_GNT_INT_PIN_LINE_ADDR      AMAZON_PCI_CFG_BASE + 0x3C
-#define POWER_MNGT_NEXT_POINTER_CAP_ID_ADDR    AMAZON_PCI_CFG_BASE + 0x40
-#define POWER_MANAGEMENT_CTRL_STATUS_ADDR      AMAZON_PCI_CFG_BASE + 0x44
-#define RESERVED_0x48                          AMAZON_PCI_CFG_BASE + 0x48
-#define RESERVED_0x4C                          AMAZON_PCI_CFG_BASE + 0x4C
-#define ERROR_ADDR_PCI_FPI_ADDR                AMAZON_PCI_CFG_BASE + 0x50
-#define ERROR_ADdR_FPI_PCI_ADDR                AMAZON_PCI_CFG_BASE + 0x54
-#define ERROR_TAG_FPI_PCI_ADDR                 AMAZON_PCI_CFG_BASE + 0x58
-#define PCI_ARB_CTRL_STATUS_ADDR               AMAZON_PCI_CFG_BASE + 0x5C
-#define INTERNAL_ARB_ENABLE_BIT                0
-#define ARB_SCHEME_BIT                         1
-#define PCI_MASTER0_PRIOR_2BITS                2
-#define PCI_MASTER1_PRIOR_2BITS                4
-#define PCI_MASTER2_PRIOR_2BITS                6
-#define PCI_MASTER0_REQ_MASK_2BITS             8
-#define PCI_MASTER1_REQ_MASK_2BITS             10
-#define PCI_MASTER2_REQ_MASK_2BITS             12
-#define PCI_MASTER0_GNT_MASK_2BITS             14
-#define PCI_MASTER1_GNT_MASK_2BITS             16
-#define PCI_MASTER2_GNT_MASK_2BITS             18
-#define FPI_PCI_INT_STATUS_ADDR                AMAZON_PCI_CFG_BASE + 0x60
-#define FPI_PCI_INT_ACK_ADDR                   AMAZON_PCI_CFG_BASE + 0x64
-#define FPI_PCI_INT_MASK_ADDR                  AMAZON_PCI_CFG_BASE + 0x68
-#define CARDBUS_CTRL_STATUS_ADDR               AMAZON_PCI_CFG_BASE + 0x6C
-#define CARDBUS_CFRAME_ENABLE                  0
-                                                                                                             
-#define CLOCK_CONTROL_default                  0x00000000
-#define CLOCK_CONTROL_mask                     0x00000003
-                                                                                                             
-#define IDENTIFICATION_default                 0x0011C002
-#define IDENTIFICATION_mask                    0x00000000
-                                                                                                             
-#define SOFTRESET_default                      0x00000000
-// SOFTRESET bit 0 is writable but will be reset to 0 after software reset is over
-#define SOFTRESET_mask                         0x00000000
-                                                                                                             
-#define PCI_FPI_ERROR_ADDRESS_default          0xFFFFFFFF
-#define PCI_FPI_ERROR_ADDRESS_mask             0x00000000
-                                                                                                             
-#define FPI_PCI_ERROR_ADDRESS_default          0xFFFFFFFF
-#define FPI_PCI_ERROR_ADDRESS_mask             0x00000000
-                                                                                                             
-#define FPI_ERROR_TAG_default                  0x0000000F
-#define FPI_ERROR_TAG_mask                     0x00000000
-                                                                                                             
-#define IRR_default                            0x00000000
-#define IRR_mask                               0x07013b2F
-                                                                                                             
-#define IRA_IR_default                         0x00000000
-#define IRA_IR_mask                            0x07013b2F
-                                                                                                             
-#define IRM_default                            0x00000000
-#define IRM_mask                               0xFFFFFFFF
-                                                                                                             
-#define EOI_default                            0x00000000
-#define EOI_mask                               0x00000000
-                                                                                                             
-#define PCI_MODE_default                       0x01000103
-#define PCI_MODE_mask                          0x1107070F
-                                                                                                             
-#define DEVICE_VENDOR_ID_default               0x000C15D1
-#define DEVICE_VENDOR_ID_mask                  0xFFFFFFFF
-                                                                                                             
-#define SUBSYSTEM_VENDOR_ID_default            0x000015D1
-#define SUBSYSTEM_VENDOR_ID_mask               0x0000FFFF
-                                                                                                             
-#define POWER_MANAGEMENT_default               0x0000001B
-#define POWER_MANAGEMENT_mask                  0x0000001F
-                                                                                                             
-#define CLASS_CODE1_default                    0x00028000
-#define CLASS_CODE1_mask                       0x00FFFFFF
-                                                                                                             
-#define BAR11_MASK_default                     0x0FF00008
-#define BAR11_MASK_mask                        0x8FF00008
-                                                                                                             
-#define BAR12_MASK_default                     0x80001800
-#define BAR12_MASK_mask                        0x80001F08
-                                                                                                             
-#define BAR13_MASK_default                     0x8FF00008
-#define BAR13_MASK_mask                        0x8FF00008
-                                                                                                             
-#define BAR14_MASK_default                     0x8F000000
-#define BAR14_MASK_mask                        0x8FFFFF08
-                                                                                                             
-#define BAR15_MASK_default                     0x80000000
-#define BAR15_MASK_mask                        0x8FFFFF08
-                                                                                                             
-#define BAR16_MASK_default                     0x80000001
-// bit 0 and bit 3 is mutually exclusive
-#define BAR16_MASK_mask                        0x8FFFFFF9
-                                                                                                             
-#define CARDBUS_CIS_POINTER1_default           0x00000000
-#define CARDBUS_CIS_POINTER1_mask              0x03FFFFFF
-                                                                                                             
-#define SUBSYSTEM_ID1_default                  0x0000000C
-#define SUBSYSTEM_ID1_mask                     0x0000FFFF
-                                                                                                             
-#define PCI_ADDRESS_MAP_11_default             0x18000000
-#define PCI_ADDRESS_MAP_11_mask                0x7FFFFFF1
-                                                                                                             
-#define PCI_ADDRESS_MAP_12_default             0x18100000
-#define PCI_ADDRESS_MAP_12_mask                0x7FFFFF01
-                                                                                                             
-#define PCI_ADDRESS_MAP_13_default             0x18200000
-#define PCI_ADDRESS_MAP_13_mask                0x7FF00001
-                                                                                                             
-#define PCI_ADDRESS_MAP_14_default             0x70000000
-#define PCI_ADDRESS_MAP_14_mask                0x7FFFFF01
-                                                                                                               
-#define PCI_ADDRESS_MAP_15_default             0x00000001
-#define PCI_ADDRESS_MAP_15_mask                0x7FFFFF01
-                                                                                                             
-#define PCI_ADDRESS_MAP_16_default             0x60000000
-#define PCI_ADDRESS_MAP_16_mask                0x7FF00001
-                                                                                                             
-#define FPI_SEGMENT_ENABLE_default             0x000003FF
-#define FPI_SEGMENT_ENABLE_mask                0x000003FF
-                                                                                                             
-#define CLASS_CODE2_default                    0x00FF0000
-#define CLASS_CODE2_mask                       0x00FFFFFF
-                                                                                                             
-#define BAR21_MASK_default                     0x80000008
-#define BAR21_MASK_mask                        0x8FFFFFF8
-                                                                                                             
-#define BAR22_MASK_default                     0x80000008
-#define BAR22_MASK_mask                        0x80001F08
-                                                                                                             
-#define BAR23_MASK_default                     0x80000008
-#define BAR23_MASK_mask                        0x8FF00008
-                                                                                                             
-#define BAR24_MASK_default                     0x8FE00000
-#define BAR24_MASK_mask                        0x8FFFFF08
-                                                                                                             
-#define BAR25_MASK_default                     0x8FFFF000
-#define BAR25_MASK_mask                        0x8FFFFF08
-                                                                                                             
-#define BAR26_MASK_default                     0x8FFFFFE1
-#define BAR26_MASK_mask                        0x8FFFFFF1
-                                                                                                             
-#define CARDBUS_CIS_POINTER2_default           0x00000000
-#define CARDBUS_CIS_POINTER2_mask              0x03FFFFFF
-
-#define SUBSYSTEM_ID2_default                  0x0000000C
-#define SUBSYSTEM_ID2_mask                     0x0000FFFF
-                                                                                                             
-#define PCI_ADDRESS_MAP_21_default             0x3FE00000
-#define PCI_ADDRESS_MAP_21_mask                0x7FFFFFF1
-                                                                                                             
-#define PCI_ADDRESS_MAP_22_default             0x68000000
-#define PCI_ADDRESS_MAP_22_mask                0x7FFFFF01
-                                                                                                             
-#define PCI_ADDRESS_MAP_23_default             0x20000000
-#define PCI_ADDRESS_MAP_23_mask                0x7FF00001
-                                                                                                             
-#define PCI_ADDRESS_MAP_24_default             0x70000001
-#define PCI_ADDRESS_MAP_24_mask                0x7FFFFF01
-                                                                                                             
-#define PCI_ADDRESS_MAP_25_default             0x78000001
-#define PCI_ADDRESS_MAP_25_mask                0x7FFFFF01
-                                                                                                             
-#define PCI_ADDRESS_MAP_26_default             0x20000000
-#define PCI_ADDRESS_MAP_26_mask                0x7FF00001
-                                                                                                             
-#define FPI_ADDRESS_MASK11LOW_default          0x00000000
-#define FPI_ADDRESS_MASK11LOW_mask             0x00070000
-                                                                                                             
-#define FPI_ADDRESS_MAP_0_default              0x00000000
-#define FPI_ADDRESS_MAP_0_mask                 0xFFF00000
-                                                                                                             
-#define FPI_ADDRESS_MAP_1_default              0x10000000
-#define FPI_ADDRESS_MAP_1_mask                 0xFFF00000
-                                                                                                             
-#define FPI_ADDRESS_MAP_2_default              0x20000000
-#define FPI_ADDRESS_MAP_2_mask                 0xFFF00000
-
-#define FPI_ADDRESS_MAP_3_default              0x30000000
-#define FPI_ADDRESS_MAP_3_mask                 0xFFF00000
-                                                                                                             
-#define FPI_ADDRESS_MAP_4_default              0x40000000
-#define FPI_ADDRESS_MAP_4_mask                 0xFFF00000
-                                                                                                             
-#define FPI_ADDRESS_MAP_5_default              0x50000000
-#define FPI_ADDRESS_MAP_5_mask                 0xFFF00000
-                                                                                                             
-#define FPI_ADDRESS_MAP_6_default              0x60000000
-#define FPI_ADDRESS_MAP_6_mask                 0xFFF00000
-                                                                                                             
-#define FPI_ADDRESS_MAP_7_default              0x70000000
-#define FPI_ADDRESS_MAP_7_mask                 0xFFF00000
-                                                                                                             
-#define FPI_ADDRESS_MAP_11LOW_default          0xB0000000
-#define FPI_ADDRESS_MAP_11LOW_mask             0xFFFF0000
-                                                                                                             
-#define FPI_ADDRESS_MAP_11HIGH_default         0xB8000000
-#define FPI_ADDRESS_MAP_11HIGH_mask            0xFFF80000
-                                                                                                             
-#define FPI_BURST_LENGTH_default               0x00000000
-#define FPI_BURST_LENGTH_mask                  0x00000303
-                                                                                                             
-#define SET_PCI_SERR_default                   0x00000000
-#define SET_PCI_SERR_mask                      0x00000000
-                                                                                                             
-#define DMA_FPI_START_ADDRESS_default          0x00000000
-#define DMA_FPI_START_ADDRESS_mask             0xFFFFFFFF
-                                                                                                             
-#define DMA_PCI_START_ADDRESS_default          0x00000000
-#define DMA_PCI_START_ADDRESS_mask             0xFFFFFFFF
-                                                                                                             
-#define DMA_TRANSFER_COUNT_default             0x00000000
-#define DMA_TRANSFER_COUNT_mask                0x0000FFFF
-
-#define DMA_CONTROL_STATUS_default             0x00000000
-#define DMA_CONTROL_STATUS_mask                0x00000000   // bit 0,1 is writable
-
-/***********************************************************************/      
-#undef IKOS_MINI_BOOT          //don't run a full booting
-#ifdef CONFIG_USE_IKOS 
-#define CONFIG_USE_VENUS               //Faster, 10M CPU and 192k baudrate
-#ifdef CONFIG_USE_VENUS
-#define IKOS_CPU_SPEED         10000000                                                                                   
-#else
-#define IKOS_CPU_SPEED         180000  //IKOS is slow                                                                             
-#endif 
-#endif //CONFIG_USE_IKOS
-
-/* 165001:henryhsu:20050603:Source Modify form Bing Tao */
-
-#if defined(CONFIG_NET_WIRELESS_SPURS) || defined(CONFIG_NET_WIRELESS_SPURS_MODULE)
-#define EBU_PCI_SOFTWARE_ARBITOR
-#endif
-
-#define  AMAZON_B11
-#ifdef AMAZON_B11
-#define SWITCH_BUF_FPI_ADDR            (0x10110000)
-#define SWITCH_BUF_ADDR                        (KSEG1+SWITCH_BUF_FPI_ADDR)
-#define SWITCH_BUF_SIZE                        (0x2800)
-#define AMAZON_B11_CBM_QD_ADDR         (SWITCH_BUF_ADDR+0x0)
-#define AMAZON_B11_BOND_CELL_ADDR      (SWITCH_BUF_ADDR+0x000)
-#endif
-#define  AMAZON_REFERENCE_BOARD
-//for AMAZON ATM bonding application
-#ifdef AMAZON_REFERENCE_BOARD
-#define  GPIO_DETECT_LOW
-#else
-#undef  GPIO_DETECT_LOW
-#endif
-
-/* 165001 */
-
-#undef AMAZON_IKOS_DEBUG_MSG
-#undef AMAZON_INT_DEBUG_MSG
-#undef AMAZON_ATM_DEBUG_MSG
-#undef AMAZON_DMA_DEBUG_MSG
-#undef AMAZON_SW_DEBUG_MSG
-#undef AMAZON_WDT_DEBUG_MSG
-#undef AMAZON_MTD_DEBUG_MSG
-#undef AMAZON_SSC_DEBUG_MSG
-#undef AMAZON_MEI_DEBUG_MSG
-
-#ifdef AMAZON_IKOS_DEBUG_MSG
-#define AMAZON_IKOS_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args)
-#else
-#define AMAZON_IKOS_DMSG(fmt,args...)
-#endif
-
-#ifdef AMAZON_WDT_DEBUG_MSG 
-#define AMAZON_WDT_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
-#else 
-#define AMAZON_WDT_DMSG(fm,args...)
-#endif
-
-#ifdef AMAZON_SSC_DEBUG_MSG 
-#define AMAZON_SSC_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
-#else 
-#define AMAZON_SSC_DMSG(fm,args...)
-#endif
-
-#ifdef AMAZON_DMA_DEBUG_MSG 
-#define AMAZON_DMA_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
-#else 
-#define AMAZON_DMA_DMSG(fm,args...)
-#endif
-
-#ifdef AMAZON_ATM_DEBUG_MSG
-#define AMAZON_TPE_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
-#else //not AMAZON_ATM_DEBUG
-#define        AMAZON_TPE_DMSG(fmt, args...)
-#endif //AMAZON_ATM_DEBUG
-
-#ifdef AMAZON_SW_DEBUG_MSG
-#define AMAZON_SW_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args)
-#else
-#define AMAZON_SW_DMSG(fmt,args...)
-#endif 
-
-#ifdef AMAZON_MTD_DEBUG_MSG
-#define AMAZON_MTD_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args)
-#else
-#define AMAZON_MTD_DMSG(fmt,args...)
-#endif 
-
-#ifdef AMAZON_INT_DEBUG_MSG
-#define AMAZON_INT_DMSG(x...) printk(x)
-#else
-#define AMAZON_INT_DMSG(x...)
-#endif 
-
-#ifdef AMAZON_MEI_DEBUG_MSG
-#define AMAZON_MEI_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args)
-#else
-#define AMAZON_MEI_DMSG(fmt,args...)
-#endif
-
-#endif //AMAZON_H 
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h
deleted file mode 100644 (file)
index 63ab592..0000000
+++ /dev/null
@@ -1,148 +0,0 @@
-#ifndef AMAZON_DMA_H
-#define AMAZON_DMA_H
-
-#define RCV_INT          1
-#define TX_BUF_FULL_INT  2
-#define TRANSMIT_CPT_INT 4
-
-#define QOS_DEFAULT_WGT 0x7fffffffUL;
-
-
-enum attr_t{
-   TX=0,
-   RX=1,
-   RESERVED=2,
-   DEFAULT=3,
-   
-};
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-typedef struct rx_desc{
-   u32 data_length:16;
-   volatile u32 reserved:7;
-   volatile u32 byte_offset:2; 
-   volatile u32 Burst_length_offset:3;
-   volatile u32 EoP:1;
-   volatile u32 Res:1;
-   volatile u32 C:1;
-   volatile u32 OWN:1;
-   volatile u32 Data_Pointer;
-   /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/ 
-}_rx_desc; 
-
-
-typedef struct tx_desc{
-   volatile u32 data_length:16;
-   volatile u32 reserved1:7;
-   volatile u32 byte_offset:5;   
-   volatile u32 EoP:1;
-   volatile u32 SoP:1;
-   volatile u32 C:1;
-   volatile u32 OWN:1;
-   volatile u32 Data_Pointer;//fix me:should be 28 bits here
-}_tx_desc;
-#else //BIG
-typedef struct rx_desc{
-       union
-       {
-               struct
-               {
-                       volatile u32 OWN                        :1;
-                       volatile u32 C                          :1;
-                       volatile u32 SoP                        :1;
-                       volatile u32 EoP                        :1;
-                       volatile u32 Burst_length_offset        :3;
-                       volatile u32 byte_offset                :2; 
-                       volatile u32 reserve                    :7;
-                       volatile u32 data_length                :16;
-               }field;
-
-               volatile u32 word;
-       }status;
-       
-       volatile u32 Data_Pointer;
-}_rx_desc; 
-
-
-typedef struct tx_desc{
-       union
-       {
-               struct
-               {
-                       volatile u32 OWN                 :1;
-                       volatile u32 C                   :1;
-                       volatile u32 SoP                 :1;
-                       volatile u32 EoP                 :1;
-                       volatile u32 byte_offset         :5; 
-                       volatile u32 reserved            :7;
-                       volatile u32 data_length         :16;
-               }field;
-
-               volatile u32 word;
-       }status;
-       
-       volatile u32 Data_Pointer;
-}_tx_desc;
-
-#endif //ENDIAN
-
-struct dma_channel_info{
-  /*filled by driver, optional*/  
-    enum attr_t attr;/*TX or RX*/
-    int weight;
-    int desc_num;
-    int packet_size;
-    int control;/*on or off*/ 
-   
-    int desc_base;
-    int status;
-};
-
-typedef struct dma_channel_info _dma_channel_info;
-
-struct dma_device_info{
-   /*variables*/ 
-   /*filled by driver, compulsary*/
-    char device_name[15];
-    enum attr_t attr;/*default or else*/
-    int tx_burst_len;
-    int rx_burst_len;   
-    int logic_rx_chan_base;
-    int logic_tx_chan_base;
-    u8 on_ch_bit;
-   /*filled by driver, optional*/
-    int  weight;
-    int  current_tx_chan;
-    int  current_rx_chan;
-    int  num_tx_chan;
-    int  num_rx_chan; 
-    struct dma_channel_info tx_chan[2];
-    struct dma_channel_info rx_chan[4]; 
-    
-    /*functions, optional*/
-    u8* (*buffer_alloc)(int len,int* offset, void** opt);
-    int (*buffer_free)(u8* dataptr, void* opt);
-    int (*intr_handler)(struct dma_device_info* info, int status);
-    /*set by device, clear by dma*/
-    int ack;
-    void * priv;               /* used by peripheral driver only */
-};
-typedef struct dma_device_info _dma_device_info;
-
-int dma_device_register(struct dma_device_info* info);
-
-int dma_device_unregister(struct dma_device_info* info);
-
-int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt);
-
-int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt);
-
-int dma_device_update(struct dma_device_info* info);
-
-void dma_device_update_rx(struct dma_device_info* dma_dev);
-
-void dma_device_update_tx(struct dma_device_info* dma_dev);
-
-void register_handler_sim(int (*handler)(int));
-#endif /* AMAZON_DMA_H */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h
deleted file mode 100644 (file)
index 6ac8ab3..0000000
+++ /dev/null
@@ -1,220 +0,0 @@
-#ifndef                _AMAZON_MEI_H
-#define                _AMAZON_MEI_H
-/////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#include "amazon_mei_app.h"
-
-#define AMAZON_MEI_DEBUG_ON
-#define AMAZON_MEI_CMV_EXTRA
-
-#define AMAZON_MEI_MAJOR       106
-
-/*
-**     Define where in ME Processor's memory map the Stratify chip lives
-*/
-#define MEI_SPACE_ACCESS       0xB0100C00
-
-#define MAXSWAPSIZE            8 * 1024        //8k *(32bits)
-//#define AMAZON_ADSL_IMAGESIZE  16*1024       // 16k * (32bits)
-
-
-//     Mailboxes
-#define MSG_LENGTH             16      // x16 bits
-#define YES_REPLY                      1
-#define NO_REPLY               0
-
-#define CMV_TIMEOUT            100     //jiffies
-#define MIB_INTERVAL           10000   //msec
-
-/***  Bit definitions ***/
-
-#define FALSE  0
-#define TRUE   1
-#define BIT0   1<<0
-#define BIT1   1<<1
-#define BIT2   1<<2
-#define BIT3   1<<3
-#define BIT4   1<<4
-#define BIT5   1<<5
-#define BIT6   1<<6
-#define BIT7   1<<7
-#define BIT8   1<<8
-#define BIT9   1<<9
-#define BIT10  1<<10
-#define BIT11  1<<11
-#define BIT12  1<<12
-#define BIT13  1<<13
-#define BIT14  1<<14
-#define BIT15  1<<15
-#define BIT16  1<<16
-#define BIT17  1<<17
-#define BIT18  1<<18
-#define BIT19  1<<19
-#define BIT20  1<<20
-#define BIT21  1<<21
-#define BIT22  1<<22
-#define BIT23  1<<23
-#define BIT24  1<<24
-#define BIT25  1<<25
-#define BIT26  1<<26
-#define BIT27  1<<27
-#define BIT28  1<<28
-#define BIT29  1<<29
-#define BIT30  1<<30
-#define BIT31  1<<31
-
-
-/***   Register address offsets, relative to MEI_SPACE_ADDRESS ***/
-#define MEI_DATA_XFR                           (0x0000 + MEI_SPACE_ACCESS)
-#define        MEI_VERSION                             (0x0200 + MEI_SPACE_ACCESS)     
-#define        ARC_GP_STAT                             (0x0204 + MEI_SPACE_ACCESS)     
-#define        MEI_XFR_ADDR                            (0x020C + MEI_SPACE_ACCESS)     
-#define        MEI_TO_ARC_INT                          (0x021C + MEI_SPACE_ACCESS)
-#define        ARC_TO_MEI_INT                          (0x0220 + MEI_SPACE_ACCESS)     
-#define        ARC_TO_MEI_INT_MASK                     (0x0224 + MEI_SPACE_ACCESS)     
-#define        MEI_DEBUG_WAD                           (0x0228 + MEI_SPACE_ACCESS)     
-#define MEI_DEBUG_RAD                          (0x022C + MEI_SPACE_ACCESS)     
-#define        MEI_DEBUG_DATA                          (0x0230 + MEI_SPACE_ACCESS)     
-#define        MEI_DEBUG_DEC                           (0x0234 + MEI_SPACE_ACCESS)     
-#define        MEI_CONTROL                             (0x0238 + MEI_SPACE_ACCESS)     
-#define        AT_CELLRDY_BC0                          (0x023C + MEI_SPACE_ACCESS)
-#define        AT_CELLRDY_BC1                          (0x0240 + MEI_SPACE_ACCESS)     
-#define        AR_CELLRDY_BC0                          (0x0244 + MEI_SPACE_ACCESS)     
-#define        AR_CELLRDY_BC1                          (0x0248 + MEI_SPACE_ACCESS)     
-#define        AAI_ACCESS                              (0x024C + MEI_SPACE_ACCESS)     
-#define        AAITXCB0                                (0x0300 + MEI_SPACE_ACCESS)     
-#define        AAITXCB1                                (0x0304 + MEI_SPACE_ACCESS)     
-#define        AAIRXCB0                                (0x0308 + MEI_SPACE_ACCESS)     
-#define        AAIRXCB1                                (0x030C + MEI_SPACE_ACCESS)     
-
-
-//     MEI_TO_ARC_INTERRUPT Register definitions
-#define        MEI_TO_ARC_INT1                 BIT3
-#define        MEI_TO_ARC_INT0                 BIT2
-#define MEI_TO_ARC_CS_DONE             BIT1
-#define        MEI_TO_ARC_MSGAV                BIT0
-
-//     ARC_TO_MEI_INTERRUPT Register definitions
-#define        ARC_TO_MEI_INT1                 BIT8
-#define        ARC_TO_MEI_INT0                 BIT7
-#define        ARC_TO_MEI_CS_REQ               BIT6
-#define        ARC_TO_MEI_DBG_DONE             BIT5
-#define        ARC_TO_MEI_MSGACK               BIT4
-#define        ARC_TO_MEI_NO_ACCESS            BIT3
-#define        ARC_TO_MEI_CHECK_AAITX          BIT2
-#define        ARC_TO_MEI_CHECK_AAIRX          BIT1
-#define        ARC_TO_MEI_MSGAV                BIT0
-
-//     ARC_TO_MEI_INTERRUPT_MASK Register definitions
-#define        GP_INT1_EN                      BIT8
-#define        GP_INT0_EN                      BIT7
-#define        CS_REQ_EN                       BIT6
-#define        DBG_DONE_EN                     BIT5
-#define        MSGACK_EN                       BIT4
-#define        NO_ACC_EN                       BIT3
-#define        AAITX_EN                        BIT2
-#define        AAIRX_EN                        BIT1
-#define        MSGAV_EN                        BIT0
-
-//     MEI_CONTROL Register definitions
-#define        INT_LEVEL                       BIT2
-#define        SOFT_RESET                      BIT1
-#define        HOST_MSTR                       BIT0
-
-//     MEI_DEBUG_DECODE Register definitions
-#define MEI_DEBUG_DEC_MASK             (0x3)
-#define MEI_DEBUG_DEC_AUX_MASK         (0x0)
-#define MEI_DEBUG_DEC_DMP1_MASK                (0x1)
-#define MEI_DEBUG_DEC_DMP2_MASK                (0x2)
-#define MEI_DEBUG_DEC_CORE_MASK         (0x3)
-
-
-//     ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
-//     page swap requests.
-#define        MEI_TO_ARC_MAILBOX              (0x15FC0)
-#define MEI_TO_ARC_MAILBOXR            (0x15FEC)                       
-#define        ARC_TO_MEI_MAILBOX              (0x15F90)       
-#define ARC_MEI_MAILBOXR               (0x15FBC)
-
-// Codeswap request messages are indicated by setting BIT31 
-#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK     (0x80000000)
-
-/*
-**     Swap page header
-*/
-//     Page must be loaded at boot time if size field has BIT31 set
-#define BOOT_FLAG      (BIT31)
-#define BOOT_FLAG_MASK ~BOOT_FLAG
-
-//     Swap page header describes size in 32-bit words, load location, and image offset
-//     for program and/or data segments
-typedef struct _arc_swp_page_hdr
-{
-       u32             p_offset;       //      Offset bytes of progseg from beginning of image
-       u32             p_dest;         //      Destination addr of progseg on processor
-       u32             p_size;         //      Size in 32-bitwords of program segment
-       u32             d_offset;       //      Offset bytes of dataseg from beginning of image
-       u32             d_dest;         //      Destination addr of dataseg on processor
-       u32             d_size;         //      Size in 32-bitwords of data segment
-}ARC_SWP_PAGE_HDR;
-
-
-/*
-**     Swap image header
-*/
-#define GET_PROG       0       //      Flag used for program mem segment
-#define GET_DATA       1       //      Flag used for data mem segment
-
-//     Image header contains size of image, checksum for image, and count of
-//     page headers. Following that are 'count' page headers followed by
-//     the code and/or data segments to be loaded
-typedef struct _arc_img_hdr
-{
-       u32                     size;           //      Size of binary image in bytes
-       u32                     checksum;       //      Checksum for image
-       u32                     count;          //      Count of swp pages in image
-       ARC_SWP_PAGE_HDR        page[1];        //      Should be "count" pages - '1' to make compiler happy
-}ARC_IMG_HDR;
-
-
-
-/*
-**     Native size for the Stratiphy interface is 32-bits. All reads and writes
-**     MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or
-**     byte data. Read routines are provided. Write routines are probably a bad idea, as the
-**     Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle
-**     could very well have unintended results.
-*/
-MEI_ERROR meiCMV(u16 *, int);                         // first arg is CMV to ARC, second to indicate whether need reply
-
-void meiLongwordWrite(u32 ul_address, u32 ul_data);
-void meiLongwordRead(u32 ul_address, u32 *pul_data);
-
-
-MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
-MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
-
-MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize);
-MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize);
-
-void meiPollForDbgDone(void);
-
-void meiMailboxInterruptsDisable(void);
-void meiMailboxInterruptsEnable(void);
-
-MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize);
-MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize);
-
-int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest);
-
-MEI_ERROR meiHaltArc(void);
-MEI_ERROR meiRunArc(void);
-
-MEI_ERROR meiDownloadBootCode(void);
-
-MEI_ERROR meiForceRebootAdslModem(void);
-
-void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data);
-
-#endif
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h
deleted file mode 100644 (file)
index 89700d9..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl 
-
-#ifndef        _AMAZON_MEI_APP_H
-#define                _AMAZON_MEI_APP_H
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
-                //  ioctl control
-#define AMAZON_MEI_START                               300
-#define AMAZON_MEI_REPLY                               301
-#define AMAZON_MEI_NOREPLY                             302
-
-#define AMAZON_MEI_RESET                               303
-#define AMAZON_MEI_REBOOT                              304
-#define AMAZON_MEI_HALT                                        305
-#define AMAZON_MEI_CMV_WINHOST                         306
-#define AMAZON_MEI_CMV_READ                            307
-#define AMAZON_MEI_CMV_WRITE                           308
-#define AMAZON_MEI_MIB_DAEMON                          309
-#define AMAZON_MEI_SHOWTIME                            310
-#define AMAZON_MEI_REMOTE                              311
-#define AMAZON_MEI_READDEBUG                           312
-#define AMAZON_MEI_WRITEDEBUG                          313
-#define AMAZON_MEI_LOP                                 314
-
-#define AMAZON_MEI_PCM_SETUP                           315
-#define AMAZON_MEI_PCM_START_TIMER                     316
-#define AMAZON_MEI_PCM_STOP_TIMER                      317
-#define AMAZON_MEI_PCM_CHECK                           318
-#define AMAZON_MEI_GET_EOC_LEN                         319
-#define AMAZON_MEI_GET_EOC_DATA                                320
-#define AMAZON_MEI_PCM_GETDATA                         321
-#define AMAZON_MEI_PCM_GPIO                            322
-#define AMAZON_MEI_EOC_SEND                            323
-//MIB
-#define AMAZON_MIB_LO_ATUC                             324
-#define AMAZON_MIB_LO_ATUR                             325
-#define AMAZON_MEI_DOWNLOAD                            326
-
-#define AMAZON_MEI_DEBUG_MODE                          327 //509221:tc.chen
-#define LOOP_DIAGNOSTIC_MODE_COMPLETE                  328
-
-
-/***   Enums    ***/
-typedef enum mei_error
-{
-       MEI_SUCCESS = 0,
-       MEI_FAILURE = -1,
-       MEI_MAILBOX_FULL = -2,
-       MEI_MAILBOX_EMPTY = -3,
-        MEI_MAILBOX_TIMEOUT = -4,
-}MEI_ERROR;
-
-#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h
deleted file mode 100644 (file)
index d98f60b..0000000
+++ /dev/null
@@ -1,1169 +0,0 @@
-// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics
-
-#ifndef __AMAZON_MEI_APP_IOCTL_H
-#define __AMAZON_MEI_APP_IOCTL_H
-
-#ifdef __KERNEL__
-#include "amazon_mei_ioctl.h"
-#endif
-
-/* Interface Name */
-//#define INTERFACE_NAME <define the interface>
-
-/* adslLineTable constants */
-#define GET_ADSL_LINE_CODE             1
-
-/* adslAtucPhysTable constants */
-#define GET_ADSL_ATUC_PHY              4
-
-/* adslAturPhysTable constants */
-#define GET_ADSL_ATUR_PHY              10
-
-/* adslAtucChanTable constants */
-#define GET_ADSL_ATUC_CHAN_INFO        15
-
-/* adslAturChanTable constants */
-#define GET_ADSL_ATUR_CHAN_INFO                18
-
-/* adslAtucPerfDataTable constants */
-#define GET_ADSL_ATUC_PERF_DATA                21
-
-/* adslAturPerfDataTable constants */
-#define GET_ADSL_ATUR_PERF_DATA                40
-
-/* adslAtucIntervalTable constants */
-#define GET_ADSL_ATUC_INTVL_INFO       60
-
-/* adslAturIntervalTable constants */
-#define GET_ADSL_ATUR_INTVL_INFO       65
-
-/* adslAtucChanPerfDataTable constants */
-#define GET_ADSL_ATUC_CHAN_PERF_DATA   70
-
-/* adslAturChanPerfDataTable constants */
-#define GET_ADSL_ATUR_CHAN_PERF_DATA   90
-
-/* adslAtucChanIntervalTable constants */
-#define GET_ADSL_ATUC_CHAN_INTVL_INFO  110
-
-/* adslAturChanIntervalTable constants */
-#define GET_ADSL_ATUR_CHAN_INTVL_INFO  115
-
-/* adslLineAlarmConfProfileTable constants */
-#define GET_ADSL_ALRM_CONF_PROF                120
-#define SET_ADSL_ALRM_CONF_PROF                121
-
-/* adslAturTrap constants */
-#define ADSL_ATUR_TRAPS                        135
-
-//////////////////  RFC-3440 //////////////
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-/* adslLineExtTable */
-#define GET_ADSL_ATUC_LINE_EXT         201
-#define SET_ADSL_ATUC_LINE_EXT         203
-
-/* adslAtucPerfDateExtTable */
-#define GET_ADSL_ATUC_PERF_DATA_EXT    205
-
-/* adslAtucIntervalExtTable */
-#define GET_ADSL_ATUC_INTVL_EXT_INFO   221
-
-/* adslAturPerfDataExtTable */
-#define GET_ADSL_ATUR_PERF_DATA_EXT    225
-
-/* adslAturIntervalExtTable */
-#define GET_ADSL_ATUR_INTVL_EXT_INFO   233
-
-/* adslAlarmConfProfileExtTable */
-#define GET_ADSL_ALRM_CONF_PROF_EXT    235
-#define SET_ADSL_ALRM_CONF_PROF_EXT    236
-
-/* adslAturExtTrap */
-#define ADSL_ATUR_EXT_TRAPS            240
-
-#endif
-
-// 603221:tc.chen start
-/* The following constants are added to support the WEB related ADSL Statistics */
-
-/* adslLineStatus constants */
-#define GET_ADSL_LINE_STATUS   245
-
-/* adslLineRate constants */
-#define GET_ADSL_LINE_RATE             250
-
-/* adslLineInformation constants */
-#define GET_ADSL_LINE_INFO             255
-
-/* adslNearEndPerformanceStats constants */
-#define GET_ADSL_NEAREND_STATS 270
-
-/* adslFarEndPerformanceStats constants */
-#define GET_ADSL_FAREND_STATS  290
-
-// 603221:tc.chen end
-
-/* Loop diagnostics mode of the ADSL line related constants */
-#define GET_ADSL_LOOP_DIAGNOSTICS_MODE         295
-#define SET_ADSL_LOOP_DIAGNOSTICS_MODE         296
-#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 299
-
-/* Sub-carrier related parameters */
-#define GET_ADSL_ATUC_SUBCARRIER_STATS         297
-#define GET_ADSL_ATUR_SUBCARRIER_STATS         298
-#define GET_ADSL_LINE_INIT_STATS               150
-#define GET_ADSL_POWER_SPECTRAL_DENSITY                151
-
-
-///////////////////////////////////////////////////////////
-// makeCMV(Opcode, Group, Address, Index, Size, Data)
-
-/* adslLineCode Flags */
-#define LINE_CODE_FLAG                 0x1     /* BIT 0th position */
-
-/* adslAtucPhysTable Flags */
-#define ATUC_PHY_SER_NUM_FLAG          0x1     /* BIT 0th position */
-#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data) 
-#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data) 
-
-#define ATUC_PHY_VENDOR_ID_FLAG                0x2     /* BIT 1 */
-#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data)
-
-#define ATUC_PHY_VER_NUM_FLAG          0x4     /* BIT 2 */
-#define ATUC_PHY_VER_NUM_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data)
-
-#define ATUC_CURR_STAT_FLAG            0x8     /* BIT 3 */
-
-#define ATUC_CURR_OUT_PWR_FLAG         0x10    /* BIT 4 */
-#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data)
-
-#define ATUC_CURR_ATTR_FLAG            0x20    /* BIT 5 */
-#define ATUC_CURR_ATTR_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data)
-
-
-/* adslAturPhysTable   Flags */
-#define ATUR_PHY_SER_NUM_FLAG          0x1     /* BIT 0th position */
-#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data)
-#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data)
-
-#define ATUR_PHY_VENDOR_ID_FLAG                0x2     /* BIT 1 */
-#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data)
-
-#define ATUR_PHY_VER_NUM_FLAG          0x4     /* BIT 2 */
-#define ATUR_PHY_VER_NUM_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data)
-
-#define ATUR_SNRMGN_FLAG               0x8
-#define ATUR_SNRMGN_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data)
-
-#define ATUR_ATTN_FLAG                 0x10
-#define ATUR_ATTN_FLAG_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data)
-
-#define ATUR_CURR_STAT_FLAG            0x20    /* BIT 3 */
-
-#define ATUR_CURR_OUT_PWR_FLAG         0x40    /* BIT 4 */
-#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data)
-
-#define ATUR_CURR_ATTR_FLAG            0x80    /* BIT 5 */
-#define ATUR_CURR_ATTR_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data)
-
-/* adslAtucChanTable Flags */
-#define ATUC_CHAN_INTLV_DELAY_FLAG     0x1     /* BIT 0th position */
-#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV     makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data)
-
-#define ATUC_CHAN_CURR_TX_RATE_FLAG    0x2     /* BIT 1 */
-#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data)
-
-#define ATUC_CHAN_PREV_TX_RATE_FLAG    0x4     /* BIT 2 */
-
-/* adslAturChanTable Flags */
-#define ATUR_CHAN_INTLV_DELAY_FLAG     0x1     /* BIT 0th position */
-#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV     makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data)
-
-#define ATUR_CHAN_CURR_TX_RATE_FLAG    0x2     /* BIT 1 */
-#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data)
-
-#define ATUR_CHAN_PREV_TX_RATE_FLAG    0x4     /* BIT 2 */
-
-#define ATUR_CHAN_CRC_BLK_LEN_FLAG     0x8     /* BIT 3 */
-
-/* adslAtucPerfDataTable Flags */
-#define ATUC_PERF_LOFS_FLAG            0x1     /* BIT 0th position */
-#define ATUC_PERF_LOSS_FLAG            0x2     /* BIT 1 */
-#define ATUC_PERF_LO_FLAG_MAKECMV              makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data)
-#define ATUC_PERF_ESS_FLAG             0x4     /* BIT 2 */
-#define ATUC_PERF_ESS_FLAG_MAKECMV             makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data) 
-#define ATUC_PERF_INITS_FLAG   0x8     /* BIT 3 */
-#define ATUC_PERF_VALID_INTVLS_FLAG    0x10 /* BIT 4 */
-#define ATUC_PERF_INVALID_INTVLS_FLAG  0x20 /* BIT 5 */
-#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUC_PERF_CURR_15MIN_LOFS_FLAG         0x80     /* BIT 7 */
-#define ATUC_PERF_CURR_15MIN_LOSS_FLAG         0x100 /* BIT 8 */
-#define ATUC_PERF_CURR_15MIN_ESS_FLAG          0x200   /* BIT 9 */
-#define ATUC_PERF_CURR_15MIN_INIT_FLAG         0x400 /* BIT 10 */
-#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUC_PERF_CURR_1DAY_LOFS_FLAG          0x1000 /* BIT 12 */
-#define ATUC_PERF_CURR_1DAY_LOSS_FLAG          0x2000 /* BIT 13 */
-#define ATUC_PERF_CURR_1DAY_ESS_FLAG           0x4000 /* BIT 14 */
-#define ATUC_PERF_CURR_1DAY_INIT_FLAG          0x8000 /* BIT 15 */
-#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG       0x10000 /* BIT 16 */
-#define ATUC_PERF_PREV_1DAY_LOFS_FLAG          0x20000 /* BIT 17 */
-#define ATUC_PERF_PREV_1DAY_LOSS_FLAG          0x40000 /* BIT 18 */
-#define ATUC_PERF_PREV_1DAY_ESS_FLAG           0x80000 /* BIT 19 */
-#define ATUC_PERF_PREV_1DAY_INITS_FLAG         0x100000 /* BIT 20 */
-
-/* adslAturPerfDataTable Flags */
-#define ATUR_PERF_LOFS_FLAG            0x1     /* BIT 0th position */
-#define ATUR_PERF_LOSS_FLAG            0x2     /* BIT 1 */
-#define ATUR_PERF_LPR_FLAG             0x4     /* BIT 2 */
-#define ATUR_PERF_LO_FLAG_MAKECMV              makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data)
-#define ATUR_PERF_ESS_FLAG             0x8     /* BIT 3 */
-#define ATUR_PERF_ESS_FLAG_MAKECMV             makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data)
-#define ATUR_PERF_VALID_INTVLS_FLAG    0x10 /* BIT 4 */
-#define ATUR_PERF_INVALID_INTVLS_FLAG  0x20 /* BIT 5 */
-#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUR_PERF_CURR_15MIN_LOFS_FLAG         0x80     /* BIT 7 */
-#define ATUR_PERF_CURR_15MIN_LOSS_FLAG         0x100 /* BIT 8 */
-#define ATUR_PERF_CURR_15MIN_LPR_FLAG          0x200 /* BIT 9 */
-#define ATUR_PERF_CURR_15MIN_ESS_FLAG          0x400   /* BIT 10 */
-#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG  0x800 /* BIT 11 */
-#define ATUR_PERF_CURR_1DAY_LOFS_FLAG          0x1000 /* BIT 12 */
-#define ATUR_PERF_CURR_1DAY_LOSS_FLAG          0x2000 /* BIT 13 */
-#define ATUR_PERF_CURR_1DAY_LPR_FLAG           0x4000 /* BIT 14 */
-#define ATUR_PERF_CURR_1DAY_ESS_FLAG           0x8000 /* BIT 15 */
-#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG       0x10000 /* BIT 16 */
-#define ATUR_PERF_PREV_1DAY_LOFS_FLAG          0x20000 /* BIT 17 */
-#define ATUR_PERF_PREV_1DAY_LOSS_FLAG          0x40000 /* BIT 18 */
-#define ATUR_PERF_PREV_1DAY_LPR_FLAG           0x80000 /* BIT 19 */
-#define ATUR_PERF_PREV_1DAY_ESS_FLAG           0x100000 /* BIT 20 */
-
-/* adslAtucIntervalTable Flags */
-#define ATUC_INTVL_LOF_FLAG            0x1     /* BIT 0th position */
-#define ATUC_INTVL_LOS_FLAG            0x2     /* BIT 1 */
-#define ATUC_INTVL_ESS_FLAG            0x4     /* BIT 2 */
-#define ATUC_INTVL_INIT_FLAG           0x8   /* BIT 3 */
-#define ATUC_INTVL_VALID_DATA_FLAG     0x10 /* BIT 4 */
-
-/* adslAturIntervalTable Flags */
-#define ATUR_INTVL_LOF_FLAG            0x1     /* BIT 0th position */
-#define ATUR_INTVL_LOS_FLAG            0x2     /* BIT 1 */
-#define ATUR_INTVL_LPR_FLAG            0x4     /* BIT 2 */
-#define ATUR_INTVL_ESS_FLAG            0x8     /* BIT 3 */
-#define ATUR_INTVL_VALID_DATA_FLAG     0x10 /* BIT 4 */
-
-/* adslAtucChanPerfDataTable Flags */
-#define ATUC_CHAN_RECV_BLK_FLAG        0x01    /* BIT 0th position */
-#define ATUC_CHAN_TX_BLK_FLAG  0x02    /* BIT 1 */
-#define ATUC_CHAN_CORR_BLK_FLAG        0x04    /* BIT 2 */
-#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
-#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
-#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
-#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG        0x80 /* BIT 7 */
-#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
-#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
-#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
-#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/
-#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
-#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
-#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
-#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
-#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
-#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */
-#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
-#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
-
-
-/* adslAturChanPerfDataTable Flags */
-#define ATUR_CHAN_RECV_BLK_FLAG   0x01         /* BIT 0th position */ 
-#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW            makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
-#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW            makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
-#define ATUR_CHAN_TX_BLK_FLAG     0x02         /* BIT 1 */
-#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW              makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
-#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW              makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
-#define ATUR_CHAN_CORR_BLK_FLAG   0x04         /* BIT 2 */
-#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL           makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data)
-#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST           makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data)
-#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08         /* BIT 3 */
-#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL         makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data)
-#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST         makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data)
-#define ATUR_CHAN_PERF_VALID_INTVL_FLAG   0x10         /* BIT 4 */
-#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20         /* BIT 5 */
-#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG    0x80   /* BIT 7 */
-#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG      0x100 /* BIT 8 */
-#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG    0x200 /* BIT 9 */
-#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG  0x400 /* BIT 10 */
-#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG     0x1000 /* BIT 12 */
-#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG       0x2000 /* BIT 13 */
-#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG     0x4000 /* BIT 14 */
-#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG   0x8000 /* BIT 15 */
-#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG     0x10000 /* BIT 16 */
-#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG     0x20000 /* BIT 17 */
-#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG    0x40000 /* BIT 18 */
-#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG     0x80000 /* BIT 19 */
-#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG   0x100000 /* BIT 20 */
-
-/* adslAtucChanIntervalTable Flags */
-#define ATUC_CHAN_INTVL_NUM_FLAG               0x1     /* BIT 0th position */
-#define ATUC_CHAN_INTVL_RECV_BLK_FLAG                  0x2     /* BIT 1 */
-#define ATUC_CHAN_INTVL_TX_BLK_FLAG            0x4     /* BIT 2 */
-#define ATUC_CHAN_INTVL_CORR_BLK_FLAG          0x8     /* BIT 3 */
-#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG        0x10    /* BIT 4 */
-#define ATUC_CHAN_INTVL_VALID_DATA_FLAG        0x20    /* BIT 5 */
-
-/* adslAturChanIntervalTable Flags */
-#define ATUR_CHAN_INTVL_NUM_FLAG               0x1     /* BIT 0th Position */
-#define ATUR_CHAN_INTVL_RECV_BLK_FLAG                  0x2     /* BIT 1 */
-#define ATUR_CHAN_INTVL_TX_BLK_FLAG            0x4     /* BIT 2 */
-#define ATUR_CHAN_INTVL_CORR_BLK_FLAG          0x8     /* BIT 3 */
-#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG        0x10    /* BIT 4 */
-#define ATUR_CHAN_INTVL_VALID_DATA_FLAG        0x20    /* BIT 5 */
-
-/* adslLineAlarmConfProfileTable Flags */
-#define ATUC_THRESH_15MIN_LOFS_FLAG            0x01   /* BIT 0th position */
-#define ATUC_THRESH_15MIN_LOSS_FLAG            0x02   /* BIT 1 */
-#define ATUC_THRESH_15MIN_ESS_FLAG             0x04   /* BIT 2 */
-#define ATUC_THRESH_FAST_RATEUP_FLAG           0x08   /* BIT 3 */
-#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG     0x10   /* BIT 4 */
-#define ATUC_THRESH_FAST_RATEDOWN_FLAG         0x20     /* BIT 5 */
-#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG           0x40    /* BIT 6 */
-#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG     0x80    /* BIT 7 */
-#define ATUR_THRESH_15MIN_LOFS_FLAG            0x100   /* BIT 8 */
-#define ATUR_THRESH_15MIN_LOSS_FLAG            0x200   /* BIT 9 */
-#define ATUR_THRESH_15MIN_LPRS_FLAG                    0x400   /* BIT 10 */
-#define ATUR_THRESH_15MIN_ESS_FLAG             0x800           /* BIT 11 */
-#define ATUR_THRESH_FAST_RATEUP_FLAG           0x1000          /* BIT 12 */
-#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG     0x2000          /* BIT 13 */
-#define ATUR_THRESH_FAST_RATEDOWN_FLAG         0x4000  /* BIT 14 */
-#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG   0x8000          /* BIT 15 */
-#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG  0x10000        /* BIT 16 */
-
-
-/* adslAturTraps Flags */
-#define ATUC_PERF_LOFS_THRESH_FLAG             0x1     /* BIT 0th position */
-#define ATUC_PERF_LOSS_THRESH_FLAG             0x2     /* BIT 1 */
-#define ATUC_PERF_ESS_THRESH_FLAG              0x4     /* BIT 2 */
-#define ATUC_RATE_CHANGE_FLAG                  0x8     /* BIT 3 */
-#define ATUR_PERF_LOFS_THRESH_FLAG             0x10    /* BIT 4 */
-#define ATUR_PERF_LOSS_THRESH_FLAG             0x20    /* BIT 5 */
-#define ATUR_PERF_LPRS_THRESH_FLAG             0x40    /* BIT 6 */
-#define ATUR_PERF_ESS_THRESH_FLAG              0x80    /* BIT 7 */
-#define ATUR_RATE_CHANGE_FLAG                  0x100   /* BIT 8 */
-
-//RFC- 3440 FLAG DEFINITIONS
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-/* adslLineExtTable flags */
-#define ATUC_LINE_TRANS_CAP_FLAG               0x1             /* BIT 0th position */
-#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV       makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data)
-#define ATUC_LINE_TRANS_CONFIG_FLAG            0x2             /* BIT 1 */
-#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data)
-#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data)
-#define ATUC_LINE_TRANS_ACTUAL_FLAG            0x4             /* BIT 2 */
-#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data)
-#define LINE_GLITE_POWER_STATE_FLAG            0x8             /* BIT 3 */
-#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data) 
-
-/* adslAtucPerfDataExtTable flags */
-#define ATUC_PERF_STAT_FASTR_FLAG         0x1 /* BIT 0th position */
-#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV      makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
-#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */
-#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
-#define ATUC_PERF_STAT_SESL_FLAG          0X4  /* BIT 2 */
-#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data)
-#define ATUC_PERF_STAT_UASL_FLAG                  0X8  /* BIT 3 */
-#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data)
-#define ATUC_PERF_CURR_15MIN_FASTR_FLAG           0X10 /* BIT 4 */
-#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20    /* BIT 5 */
-#define ATUC_PERF_CURR_15MIN_SESL_FLAG          0X40   /* BIT 6 */
-#define ATUC_PERF_CURR_15MIN_UASL_FLAG             0X80        /* BIT 7 */
-#define ATUC_PERF_CURR_1DAY_FASTR_FLAG             0X100       /* BIT 8 */
-#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG  0X200   /* BIT 9 */
-#define ATUC_PERF_CURR_1DAY_SESL_FLAG                  0X400   /* BIT 10 */
-#define ATUC_PERF_CURR_1DAY_UASL_FLAG                  0X800   /* BIT 11 */
-#define ATUC_PERF_PREV_1DAY_FASTR_FLAG              0X1000 /* BIT 12 */
-#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG  0X2000 /* BIT 13 */
-#define ATUC_PERF_PREV_1DAY_SESL_FLAG                  0X4000 /* BIT 14 */
-#define ATUC_PERF_PREV_1DAY_UASL_FLAG                  0X8000 /* BIT 15 */
-
-/* adslAturPerfDataExtTable */
-#define ATUR_PERF_STAT_SESL_FLAG               0X1 /* BIT 0th position */
-#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data)     
-#define ATUR_PERF_STAT_UASL_FLAG               0X2 /* BIT 1 */
-#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data)
-#define ATUR_PERF_CURR_15MIN_SESL_FLAG         0X4 /* BIT 2 */
-#define ATUR_PERF_CURR_15MIN_UASL_FLAG         0X8 /* BIT 3 */
-#define ATUR_PERF_CURR_1DAY_SESL_FLAG          0X10 /* BIT 4 */
-#define ATUR_PERF_CURR_1DAY_UASL_FLAG          0X20 /* BIT 5 */
-#define ATUR_PERF_PREV_1DAY_SESL_FLAG          0X40 /* BIT 6 */
-#define ATUR_PERF_PREV_1DAY_UASL_FLAG          0X80 /* BIT 7 */
-
-/* adslAutcIntervalExtTable flags */
-#define ATUC_INTERVAL_FASTR_FLAG               0x1 /* Bit 0 */         
-#define ATUC_INTERVAL_FAILED_FASTR_FLAG                0x2 /* Bit 1 */         
-#define ATUC_INTERVAL_SESL_FLAG                        0x4 /* Bit 2 */         
-#define ATUC_INTERVAL_UASL_FLAG                        0x8 /* Bit 3 */         
-
-/* adslAturIntervalExtTable */
-#define ATUR_INTERVAL_SESL_FLAG                0X1 /* BIT 0th position */
-#define ATUR_INTERVAL_UASL_FLAG                0X2 /* BIT 1 */
-
-/* adslAlarmConfProfileExtTable */
-#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */
-#define ATUC_THRESH_15MIN_SESL_FLAG             0X2 /* BIT 1 */
-#define ATUC_THRESH_15MIN_UASL_FLAG             0X4 /* BIT 2 */
-#define ATUR_THRESH_15MIN_SESL_FLAG             0X8 /* BIT 3 */
-#define ATUR_THRESH_15MIN_UASL_FLAG             0X10 /* BIT 4 */
-
-/* adslAturExtTraps */
-#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG      0X1 /* BIT 0th position */
-#define ATUC_15MIN_SESL_TRAP_FLAG               0X2 /* BIT 1 */
-#define ATUC_15MIN_UASL_TRAP_FLAG               0X4 /* BIT 2 */
-#define ATUR_15MIN_SESL_TRAP_FLAG               0X8 /* BIT 3 */
-#define ATUR_15MIN_UASL_TRAP_FLAG               0X10 /* BIT 4 */
-
-// 603221:tc.chen start        
-/* adslLineStatus Flags */
-#define LINE_STAT_MODEM_STATUS_FLAG     0x1 /* BIT 0th position */
-#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
-#define LINE_STAT_MODE_SEL_FLAG         0x2 /* BIT 1 */
-#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data)
-#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */
-#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data)
-#define LINE_STAT_LATENCY_FLAG          0x8 /* BIT 3 */
-#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data)
-
-/* adslLineRate Flags */
-#define LINE_RATE_DATA_RATEDS_FLAG     0x1 /* BIT 0th position */
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data)
-
-
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data)
-
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data)
-
-#define LINE_RATE_DATA_RATEUS_FLAG     0x2 /* BIT 1 */
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data)
-
-
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data)
-
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data)
-
-#define LINE_RATE_ATTNDRDS_FLAG        0x4 /* BIT 2 */
-#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data)
-
-#define LINE_RATE_ATTNDRUS_FLAG                0x8 /* BIT 3 */
-#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data)
-
-/* adslLineInformation Flags */
-#define LINE_INFO_INTLV_DEPTHDS_FLAG   0x1 /* BIT 0th position */
-#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data)
-#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data)
-#define LINE_INFO_INTLV_DEPTHUS_FLAG   0x2 /* BIT 1 */
-#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data)
-#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data)
-#define LINE_INFO_LATNDS_FLAG          0x4 /* BIT 2 */
-#define LINE_INFO_LATNDS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data)
-#define LINE_INFO_LATNUS_FLAG          0x8 /* BIT 3 */
-#define LINE_INFO_LATNUS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data)
-#define LINE_INFO_SATNDS_FLAG                  0x10 /* BIT 4 */
-#define LINE_INFO_SATNDS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data)
-#define LINE_INFO_SATNUS_FLAG                  0x20 /* BIT 5 */
-#define LINE_INFO_SATNUS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data)
-#define LINE_INFO_SNRMNDS_FLAG                 0x40 /* BIT 6 */
-#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV   makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data)
-#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV   makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data)
-#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data)
-#define LINE_INFO_SNRMNUS_FLAG                 0x80 /* BIT 7 */
-#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data)
-#define LINE_INFO_ACATPDS_FLAG         0x100 /* BIT 8 */
-#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data)
-#define LINE_INFO_ACATPUS_FLAG         0x200 /* BIT 9 */
-#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data)
-
-/* adslNearEndPerformanceStats Flags */
-#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
-#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
-#define NEAREND_PERF_SUPERFRAME_FLAG   0x1 /* BIT 0th position */
-#define NEAREND_PERF_LOS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data)
-#define NEAREND_PERF_LOS_FLAG          0x2 /* BIT 1 */
-#define NEAREND_PERF_LOF_FLAG          0x4 /* BIT 2 */
-#define NEAREND_PERF_LPR_FLAG          0x8 /* BIT 3 */
-#define NEAREND_PERF_NCD_FLAG          0x10 /* BIT 4 */
-#define NEAREND_PERF_LCD_FLAG          0x20 /* BIT 5 */
-#define NEAREND_PERF_CRC_FLAG          0x40 /* BIT 6 */
-#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV      makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data)
-#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV      makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data)
-#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data)
-#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data)
-#define NEAREND_PERF_RSCORR_FLAG       0x80 /* BIT 7 */
-#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data)
-#define NEAREND_PERF_FECS_FLAG         0x100 /* BIT 8 */
-#define NEAREND_PERF_ES_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data)
-#define NEAREND_PERF_ES_FLAG           0x200 /* BIT 9 */
-#define NEAREND_PERF_SES_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data)
-#define NEAREND_PERF_SES_FLAG          0x400 /* BIT 10 */
-#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data)
-#define NEAREND_PERF_LOSS_FLAG         0x800 /* BIT 11 */
-#define NEAREND_PERF_UAS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data)
-#define NEAREND_PERF_UAS_FLAG          0x1000 /* BIT 12 */
-#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data)
-#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data)
-#define NEAREND_PERF_HECERR_FLAG               0x2000 /* BIT 13 */
-
-/* adslFarEndPerformanceStats Flags */
-#define FAREND_PERF_LOS_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data)
-#define FAREND_PERF_LOS_FLAG   0x1 /* BIT 0th position */
-#define FAREND_PERF_LOF_FLAG   0x2 /* BIT 1 */
-#define FAREND_PERF_LPR_FLAG   0x4 /* BIT 2 */
-#define FAREND_PERF_NCD_FLAG   0x8 /* BIT 3 */
-#define FAREND_PERF_LCD_FLAG   0x10 /* BIT 4 */
-#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data)
-#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data)
-#define FAREND_PERF_CRC_FLAG   0x20 /* BIT 5 */
-#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data)
-#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data)
-#define FAREND_PERF_RSCORR_FLAG        0x40 /* BIT 6 */
-#define FAREND_PERF_FECS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data)
-#define FAREND_PERF_FECS_FLAG  0x80 /* BIT 7 */
-#define FAREND_PERF_ES_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data)
-#define FAREND_PERF_ES_FLAG    0x100 /* BIT 8 */
-#define FAREND_PERF_SES_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data)
-#define FAREND_PERF_SES_FLAG   0x200 /* BIT 9 */
-#define FAREND_PERF_LOSS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data)
-#define FAREND_PERF_LOSS_FLAG  0x400 /* BIT 10 */
-#define FAREND_PERF_UAS_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data)
-#define FAREND_PERF_UAS_FLAG   0x800 /* BIT 11 */
-#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data)
-#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data)
-#define FAREND_PERF_HECERR_FLAG        0x1000 /* BIT 12 */
-// 603221:tc.chen end
-/* TR-69 related additional parameters - defines */
-/* Defines for  struct adslATURSubcarrierInfo */
-#define        NEAREND_HLINSC  0x1
-#define NEAREND_HLINSC_MAKECMV(mode)           makeCMV(mode, INFO, 71, 2, 1, data)
-#define        NEAREND_HLINPS  0x2
-#define NEAREND_HLINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 73, idx, size, data)
-#define        NEAREND_HLOGMT  0x4
-#define NEAREND_HLOGMT_MAKECMV(mode)           makeCMV(mode, INFO, 80, 0, 1, data)
-#define NEAREND_HLOGPS 0x8
-#define NEAREND_HLOGPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 75, idx, size, data)
-#define NEAREND_QLNMT  0x10
-#define NEAREND_QLNMT_MAKECMV(mode)            makeCMV(mode, INFO, 80, 1, 1, data)
-#define        NEAREND_QLNPS   0x20
-#define NEAREND_QLNPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 77, idx, size, data)
-#define        NEAREND_SNRMT   0x40
-#define NEAREND_SNRMT_MAKECMV(mode)            makeCMV(mode, INFO, 80, 2, 1, data)
-#define        NEAREND_SNRPS   0x80
-#define NEAREND_SNRPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 78, idx, size, data)
-#define        NEAREND_BITPS   0x100
-#define NEAREND_BITPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 22, idx, size, data)
-#define        NEAREND_GAINPS  0x200
-#define NEAREND_GAINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 24, idx, size, data)
-
-/* Defines for  struct adslATUCSubcarrierInfo */
-#define         FAREND_HLINSC  0x1
-#define  FAREND_HLINSC_MAKECMV(mode)           makeCMV(mode, INFO, 70, 0, 1, data)
-#define         FAREND_HLINPS  0x2
-#define  FAREND_HLINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 72, idx, size, data)
-#define         FAREND_HLOGMT  0x4
-#define  FAREND_HLOGMT_MAKECMV(mode)           makeCMV(mode, INFO, 79, 0, 1, data)
-#define  FAREND_HLOGPS 0x8
-#define  FAREND_HLOGPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 74, idx, size, data)
-#define  FAREND_QLNMT  0x10
-#define  FAREND_QLNMT_MAKECMV(mode)            makeCMV(mode, INFO, 79, 1, 1, data)
-#define         FAREND_QLNPS   0x20
-#define  FAREND_QLNPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 76, idx, size, data)
-#define         FAREND_SNRMT   0x40
-#define  FAREND_SNRMT_MAKECMV(mode)            makeCMV(mode, INFO, 79, 2, 1, data)
-#define         FAREND_SNRPS   0x80
-#define  FAREND_SNRPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 10, idx, size, data)
-#define         FAREND_BITPS   0x100
-#define  FAREND_BITPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 23, idx, size, data)
-#define         FAREND_GAINPS  0x200
-#define  FAREND_GAINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 25, idx, size, data)
-
-
-// GET_ADSL_POWER_SPECTRAL_DENSITY
-#define NOMPSD_US_MAKECMV      makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data)
-#define NOMPSD_DS_MAKECMV      makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data)
-#define PCB_US_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data)
-#define PCB_DS_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data)
-#define        RMSGI_US_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data)
-#define        RMSGI_DS_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data)
-
-
-#endif
-/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing
-
-#define SET_FLAG(flags, flag_val)   ((*flags) = ((*flags) | flag_val))
-//     -- This macro sets the flags with the flag_val. Here flags is passed as a pointer
-
-#define IS_FLAG_SET(flags, test_flag)  (((*flags) & (test_flag)) == (test_flag)? test_flag:0)
-//     -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer
-
-
-#define CLR_FLAG(flags, flag_bit)      ((*flags) = (*flags) & (~flag_bit))
-//     -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer
-
-
-////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION
-       
-//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type.
-       //
-#define u32 unsigned int
-#define u16 unsigned short
-#define s16 short
-#define u8 unsigned char
-
-
-typedef u32 AdslPerfTimeElapsed;
-typedef u32 AdslPerfPrevDayCount;
-typedef u32 PerfCurrentCount;
-typedef u32 PerfIntervalCount;
-typedef u32 AdslPerfCurrDayCount;
-
-
-//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry)
-
-typedef struct adslLineTableEntry {
-       int ifIndex;
-       int adslLineCode;
-       u8 flags;
-} adslLineTableEntry;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct adslLineExtTableEntry {
-       int ifIndex;
-       u16 adslLineTransAtucCap;
-       u16 adslLineTransAtucConfig;
-       u16 adslLineTransAtucActual;
-       int adslLineGlitePowerState;
-       u32 flags;
-}adslLineExtTableEntry;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_PHY, void  *struct_adslAtucPhysEntry)
-
-typedef struct adslVendorId {
-       u16     country_code;
-       u_char  provider_id[4];  /* Ascii characters */
-       u_char  revision_info[2];
-}adslVendorId;
-
-
-typedef struct adslAtucPhysEntry {
-       int ifIndex;
-       char serial_no[32];
-       union {
-               char vendor_id[16];
-               adslVendorId vendor_info;
-       } vendor_id;
-
-       char version_no[16];
-       u32 status;
-       int outputPwr;
-       u32 attainableRate;
-       u8 flags;
-} adslAtucPhysEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_PHY, void  *struct_adslAturPhysEntry)
-
-typedef struct adslAturPhysEntry {
-       int ifIndex;
-       char serial_no[32];
-       union {
-       char vendor_id[16];
-               adslVendorId vendor_info;
-       } vendor_id;
-       char version_no[16];
-       int SnrMgn;
-       u32 Attn;
-       u32 status;
-       int outputPwr;
-       u32 attainableRate;
-       u8 flags;
-} adslAturPhysEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo)
-
-typedef struct adslAtucChanInfo {
-       int ifIndex;
-       u32 interleaveDelay;
-       u32 currTxRate;
-       u32 prevTxRate;
-       u8 flags;
-} adslAtucChanInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo)
-
-typedef struct adslAturChanInfo {
-       int ifIndex;
-       u32 interleaveDelay;
-       u32 currTxRate;
-       u32 prevTxRate;
-       u32 crcBlkLen;
-       u8 flags;
-} adslAturChanInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA,  void *struct_atucPerfDataEntry)
-
-typedef struct atucPerfDataEntry
-{
-   int                 ifIndex;
-   u32                         adslAtucPerfLofs;             
-   u32                         adslAtucPerfLoss;             
-   u32                         adslAtucPerfESs;                 
-   u32                         adslAtucPerfInits;
-   int                         adslAtucPerfValidIntervals;
-   int                         adslAtucPerfInvalidIntervals;
-   AdslPerfTimeElapsed         adslAtucPerfCurr15MinTimeElapsed;
-   PerfCurrentCount    adslAtucPerfCurr15MinLofs;
-   PerfCurrentCount    adslAtucPerfCurr15MinLoss;
-   PerfCurrentCount    adslAtucPerfCurr15MinESs;
-   PerfCurrentCount    adslAtucPerfCurr15MinInits;
-   AdslPerfTimeElapsed         adslAtucPerfCurr1DayTimeElapsed;
-   AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs;
-   AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss;
-   AdslPerfCurrDayCount adslAtucPerfCurr1DayESs;
-   AdslPerfCurrDayCount adslAtucPerfCurr1DayInits;
-   int                         adslAtucPerfPrev1DayMoniSecs;
-   AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs;
-   AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss;
-   AdslPerfPrevDayCount adslAtucPerfPrev1DayESs;
-   AdslPerfPrevDayCount adslAtucPerfPrev1DayInits;
-   u32                 flags;
-} atucPerfDataEntry;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct atucPerfDataExtEntry
- {
-  int ifIndex;
-  u32 adslAtucPerfStatFastR;
-  u32 adslAtucPerfStatFailedFastR;
-  u32 adslAtucPerfStatSesL;
-  u32 adslAtucPerfStatUasL;
-  u32 adslAtucPerfCurr15MinFastR;
-  u32 adslAtucPerfCurr15MinFailedFastR;
-  u32 adslAtucPerfCurr15MinSesL;
-  u32 adslAtucPerfCurr15MinUasL;
-  u32 adslAtucPerfCurr1DayFastR;
-  u32 adslAtucPerfCurr1DayFailedFastR;
-  u32 adslAtucPerfCurr1DaySesL;
-  u32 adslAtucPerfCurr1DayUasL;
-  u32 adslAtucPerfPrev1DayFastR;
-  u32 adslAtucPerfPrev1DayFailedFastR;
-  u32 adslAtucPerfPrev1DaySesL;
-  u32 adslAtucPerfPrev1DayUasL;
-  u32  flags;
-} atucPerfDataExtEntry; 
-
-#endif
-//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry)
-
-typedef struct aturPerfDataEntry
-{
-   int                 ifIndex;
-   u32                         adslAturPerfLofs;             
-   u32                         adslAturPerfLoss;             
-   u32                         adslAturPerfLprs;                 
-   u32                         adslAturPerfESs;
-   int                         adslAturPerfValidIntervals;
-   int                         adslAturPerfInvalidIntervals;
-   AdslPerfTimeElapsed         adslAturPerfCurr15MinTimeElapsed;
-   PerfCurrentCount    adslAturPerfCurr15MinLofs;
-   PerfCurrentCount    adslAturPerfCurr15MinLoss;
-   PerfCurrentCount    adslAturPerfCurr15MinLprs;
-   PerfCurrentCount    adslAturPerfCurr15MinESs;
-   AdslPerfTimeElapsed         adslAturPerfCurr1DayTimeElapsed;
-   AdslPerfCurrDayCount adslAturPerfCurr1DayLofs;
-   AdslPerfCurrDayCount adslAturPerfCurr1DayLoss;
-   AdslPerfCurrDayCount adslAturPerfCurr1DayLprs;
-   AdslPerfCurrDayCount adslAturPerfCurr1DayESs;
-   int                         adslAturPerfPrev1DayMoniSecs;
-   AdslPerfPrevDayCount adslAturPerfPrev1DayLofs;
-   AdslPerfPrevDayCount adslAturPerfPrev1DayLoss;
-   AdslPerfPrevDayCount adslAturPerfPrev1DayLprs;
-   AdslPerfPrevDayCount adslAturPerfPrev1DayESs;
-   u32                 flags;
-} aturPerfDataEntry;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct aturPerfDataExtEntry
- {
-  int ifIndex;
-  u32 adslAturPerfStatSesL;
-  u32 adslAturPerfStatUasL;
-  u32 adslAturPerfCurr15MinSesL;
-  u32 adslAturPerfCurr15MinUasL;
-  u32 adslAturPerfCurr1DaySesL;
-  u32 adslAturPerfCurr1DayUasL;
-  u32 adslAturPerfPrev1DaySesL;
-  u32 adslAturPerfPrev1DayUasL;
-  u32  flags;
-} aturPerfDataExtEntry;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo)
-
-typedef struct adslAtucIntvlInfo {
-       int ifIndex;
-        int IntervalNumber;
-       PerfIntervalCount intervalLOF;
-       PerfIntervalCount intervalLOS;
-       PerfIntervalCount intervalES;
-       PerfIntervalCount intervalInits; 
-       int intervalValidData;
-       u8 flags;
-} adslAtucIntvlInfo;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct adslAtucInvtlExtInfo
- {
-  int ifIndex;
-  int IntervalNumber;
-  u32 adslAtucIntervalFastR;
-  u32 adslAtucIntervalFailedFastR;
-  u32 adslAtucIntervalSesL;
-  u32 adslAtucIntervalUasL;
-  u32  flags;
-} adslAtucInvtlExtInfo;
-#endif
-//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo)
-
-typedef struct adslAturIntvlInfo {
-       int ifIndex;
-        int IntervalNumber;
-       PerfIntervalCount intervalLOF;
-       PerfIntervalCount intervalLOS;
-       PerfIntervalCount intervalLPR;
-       PerfIntervalCount intervalES;
-       int intervalValidData;
-       u8 flags;
-} adslAturIntvlInfo;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct adslAturInvtlExtInfo
- {
-  int ifIndex;
-  int IntervalNumber;
-  u32 adslAturIntervalSesL;
-  u32 adslAturIntervalUasL;
-  u32  flags;
-} adslAturInvtlExtInfo;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA,  void *struct_atucChannelPerfDataEntry)
-
-typedef struct atucChannelPerfDataEntry
-{
-   int                 ifIndex;
-   u32                         adslAtucChanReceivedBlks;             
-   u32                         adslAtucChanTransmittedBlks;             
-   u32                         adslAtucChanCorrectedBlks;                 
-   u32                         adslAtucChanUncorrectBlks;
-   int                         adslAtucChanPerfValidIntervals;
-   int                         adslAtucChanPerfInvalidIntervals;
-   AdslPerfTimeElapsed         adslAtucChanPerfCurr15MinTimeElapsed;
-   PerfCurrentCount    adslAtucChanPerfCurr15MinReceivedBlks;
-   PerfCurrentCount    adslAtucChanPerfCurr15MinTransmittedBlks;
-   PerfCurrentCount    adslAtucChanPerfCurr15MinCorrectedBlks;
-   PerfCurrentCount    adslAtucChanPerfCurr15MinUncorrectBlks;
-   AdslPerfTimeElapsed  adslAtucChanPerfCurr1DayTimeElapsed;
-   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks;
-   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks;
-   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks;
-   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks;
-   int                  adslAtucChanPerfPrev1DayMoniSecs;
-   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks;
-   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks;
-   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks;
-   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks;
-   u32                 flags;
-}atucChannelPerfDataEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA,  void *struct_aturChannelPerfDataEntry)
-
-typedef struct aturChannelPerfDataEntry
-{
-   int                 ifIndex;
-   u32                         adslAturChanReceivedBlks;             
-   u32                         adslAturChanTransmittedBlks;             
-   u32                         adslAturChanCorrectedBlks;                 
-   u32                         adslAturChanUncorrectBlks;
-   int                         adslAturChanPerfValidIntervals;
-   int                         adslAturChanPerfInvalidIntervals;
-   AdslPerfTimeElapsed         adslAturChanPerfCurr15MinTimeElapsed;
-   PerfCurrentCount    adslAturChanPerfCurr15MinReceivedBlks;
-   PerfCurrentCount    adslAturChanPerfCurr15MinTransmittedBlks;
-   PerfCurrentCount    adslAturChanPerfCurr15MinCorrectedBlks;
-   PerfCurrentCount    adslAturChanPerfCurr15MinUncorrectBlks;
-   AdslPerfTimeElapsed  adslAturChanPerfCurr1DayTimeElapsed;
-   AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks;
-   AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks;
-   AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks;
-   AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks;
-   int                  adslAturChanPerfPrev1DayMoniSecs;
-   AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks;
-   AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks;
-   AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks;
-   AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks;
-   u32                 flags;
-} aturChannelPerfDataEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo)
-
-typedef struct adslAtucChanIntvlInfo {
-       int ifIndex;
-        int IntervalNumber;
-       PerfIntervalCount chanIntervalRecvdBlks;
-       PerfIntervalCount chanIntervalXmitBlks;
-       PerfIntervalCount chanIntervalCorrectedBlks;
-       PerfIntervalCount chanIntervalUncorrectBlks;
-       int intervalValidData;
-       u8 flags;
-} adslAtucChanIntvlInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo)
-
-typedef struct adslAturChanIntvlInfo {
-       int ifIndex;
-        int IntervalNumber;
-       PerfIntervalCount chanIntervalRecvdBlks;
-       PerfIntervalCount chanIntervalXmitBlks;
-       PerfIntervalCount chanIntervalCorrectedBlks;
-       PerfIntervalCount chanIntervalUncorrectBlks;
-       int intervalValidData;
-       u8 flags;
-} adslAturChanIntvlInfo;
-
-
-//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF,  void *struct_adslLineAlarmConfProfileEntry)
-//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF,  void *struct_adslLineAlarmConfProfileEntry)
-
-typedef struct  adslLineAlarmConfProfileEntry
- {
-  unsigned char adslLineAlarmConfProfileName[32];
-    int        adslAtucThresh15MinLofs;
-    int        adslAtucThresh15MinLoss;
-    int        adslAtucThresh15MinESs;
-    u32        adslAtucThreshFastRateUp;
-    u32        adslAtucThreshInterleaveRateUp;
-    u32        adslAtucThreshFastRateDown;
-    u32        adslAtucThreshInterleaveRateDown;
-    int        adslAtucInitFailureTrapEnable;
-    int        adslAturThresh15MinLofs;
-    int        adslAturThresh15MinLoss;
-    int        adslAturThresh15MinLprs;
-    int        adslAturThresh15MinESs;
-    u32        adslAturThreshFastRateUp;
-    u32        adslAturThreshInterleaveRateUp;
-    u32        adslAturThreshFastRateDown;
-    u32        adslAturThreshInterleaveRateDown;
-    int        adslLineAlarmConfProfileRowStatus;
-    u32        flags;
-} adslLineAlarmConfProfileEntry;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct adslLineAlarmConfProfileExtEntry
- {
-  u8  adslLineAlarmConfProfileExtName[32];
-  u32 adslAtucThreshold15MinFailedFastR;
-  u32 adslAtucThreshold15MinSesL;
-  u32 adslAtucThreshold15MinUasL;
-  u32 adslAturThreshold15MinSesL;
-  u32 adslAturThreshold15MinUasL;
-  u32  flags;
-} adslLineAlarmConfProfileExtEntry;
-#endif
-//TRAPS
-
-// 603221:tc.chen start
-/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */
-typedef struct  adslLineStatus
- {
-    int        adslModemStatus;
-    u32        adslModeSelected;
-    int        adslAtucThresh15MinESs;
-    int        adslTrellisCodeEnable;
-    int        adslLatency;
-    u8 flags;
- } adslLineStatusInfo;
-
-typedef struct  adslLineRate
- {
-    u32        adslDataRateds;
-    u32        adslDataRateus;
-    u32        adslATTNDRds;   
-    u32        adslATTNDRus;   
-    u8         flags;
- } adslLineRateInfo;
-
-typedef struct  adslLineInfo
- {
-    u32        adslInterleaveDepthds;
-    u32        adslInterleaveDepthus;
-    u32        adslLATNds;
-    u32        adslLATNus;
-    u32        adslSATNds;
-    u32        adslSATNus;
-    int                adslSNRMds;
-    int                adslSNRMus;
-    int                adslACATPds;
-    int                adslACATPus;
-    u32        flags;
- } adslLineInfo;
-
-typedef struct  adslNearEndPerfStats
- {
-    u32        adslSuperFrames; 
-    u32        adslneLOS;
-    u32        adslneLOF;
-    u32        adslneLPR;
-    u32        adslneNCD;
-    u32        adslneLCD;
-    u32        adslneCRC;
-    u32                adslneRSCorr;
-    u32                adslneFECS;
-    u32                adslneES;
-    u32                adslneSES;
-    u32                adslneLOSS;
-    u32                adslneUAS;
-    u32                adslneHECErrors;
-    u32                flags;
- } adslNearEndPerfStats;
-
-typedef struct  adslFarEndPerfStats
- {
-    u32        adslfeLOS;
-    u32        adslfeLOF;
-    u32        adslfeLPR;
-    u32        adslfeNCD;
-    u32        adslfeLCD;
-    u32        adslfeCRC;
-    u32                adslfeRSCorr;
-    u32                adslfeFECS;
-    u32                adslfeES;
-    u32                adslfeSES;
-    u32                adslfeLOSS;
-    u32                adslfeUAS;
-    u32                adslfeHECErrors;
-    u32                flags;
- } adslFarEndPerfStats;
-// 603221:tc.chen end
-
-/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */
-typedef struct adslATURSubcarrierInfo {
-       int     ifindex;
-       u16     HLINSCds;
-       u16     HLINpsds[1024];/* Even index = real part; Odd Index
-                                   = imaginary part for each tone */
-       u16     HLOGMTds;
-       u16     HLOGpsds[512];
-       u16     QLNMTds;
-       u16     QLNpsds[512];
-       u16     SNRMTds;
-       u16     SNRpsds[512];  
-       u16     BITpsds[512];
-       u16     GAINpsds[512];
-       u16     flags;
-}adslATURSubcarrierInfo;
-
-typedef struct adslATUCSubcarrierInfo {
-       int     ifindex;
-       u16     HLINSCus;
-       u16     HLINpsus[128];/* Even index = real part; Odd Index
-                                   = imaginary part for each tone */
-       u16     HLOGMTus;
-       u16     HLOGpsus[64];
-       u16     QLNMTus;
-       u16     QLNpsus[64]; 
-       u16     SNRMTus;
-       u16     SNRpsus[64];  
-       u16     BITpsus[64];
-       u16     GAINpsus[64];
-       u16     flags;
-}adslATUCSubcarrierInfo;
-
-#ifndef u_int16
-#define u_int16 u16
-#endif
-
-typedef struct adslInitStats {
-       u_int16 FullInitializationCount;
-       u_int16 FailedFullInitializationCount;
-       u_int16 LINIT_Errors;
-       u_int16 Init_Timeouts;
-}adslInitStats;
-
-typedef struct adslPowerSpectralDensity {
-       int     ACTPSDds;
-       int     ACTPSDus;
-}adslPowerSpectralDensity;
-
-
-//ioctl(int fd, ADSL_ATUR_TRAPS, void  *uint16_flags)
-typedef union structpts {
-       adslLineTableEntry * adslLineTableEntry_pt;
-       adslAtucPhysEntry * adslAtucPhysEntry_pt;
-       adslAturPhysEntry * adslAturPhysEntry_pt;
-       adslAtucChanInfo * adslAtucChanInfo_pt;
-       adslAturChanInfo * adslAturChanInfo_pt;
-       atucPerfDataEntry * atucPerfDataEntry_pt;
-       aturPerfDataEntry * aturPerfDataEntry_pt;
-       adslAtucIntvlInfo * adslAtucIntvlInfo_pt;
-       adslAturIntvlInfo * adslAturIntvlInfo_pt;
-       atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt;
-       aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt;
-       adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt;
-       adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt;
-       adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt;
-       // RFC 3440
-       
-    #ifdef AMAZON_MEI_MIB_RFC3440
-       adslLineExtTableEntry * adslLineExtTableEntry_pt;
-       atucPerfDataExtEntry * atucPerfDataExtEntry_pt;
-       adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt;
-       aturPerfDataExtEntry * aturPerfDataExtEntry_pt;
-       adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt;
-       adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt;
-    #endif 
-// 603221:tc.chen start
-       adslLineStatusInfo      * adslLineStatusInfo_pt;
-       adslLineRateInfo        * adslLineRateInfo_pt;
-       adslLineInfo            * adslLineInfo_pt;
-       adslNearEndPerfStats    * adslNearEndPerfStats_pt;
-       adslFarEndPerfStats     * adslFarEndPerfStats_pt;
-// 603221:tc.chen end
-       adslATUCSubcarrierInfo  * adslATUCSubcarrierInfo_pt;
-       adslATURSubcarrierInfo  * adslATURSubcarrierInfo_pt;
-       adslPowerSpectralDensity * adslPowerSpectralDensity_pt;
-}structpts;
-
-#endif /* ] __AMAZON_MEI_APP_IOCTL_H */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h
deleted file mode 100644 (file)
index 02a150e..0000000
+++ /dev/null
@@ -1,757 +0,0 @@
-//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl 
-#ifndef         _AMAZON_MEI_IOCTL_H
-#define                _AMAZON_MEI_IOCTL_H
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-#define PCM_BUFF_SIZE          1024 //bytes
-//  interrupt numbers
-
-#ifndef                _AMAZON_ADSL_APP
-
-typedef struct pcm_data_struct{
-       u16 S;
-       u16 temp;
-       u16 LSW;
-       u16 MSW;
-       u16 len;
-       u16 rdindex;
-       u16 wrindex;
-       u16 flow;
-       
-       int finish;
-       u8 buff[PCM_BUFF_SIZE]; 
-       int point;
-}pcm_data_struct;
-
-typedef struct amazon_clreoc_pkt{
-       struct list_head list;
-       u8 * command;           //point to clreoc command data
-       int len;                //command length
-}amazon_clreoc_pkt;
-
-// Number of intervals
-#define INTERVAL_NUM                                   192 //two days
-typedef struct amazon_mei_mib{
-       struct list_head list;
-       struct timeval start_time;      //start of current interval
-       
-       int AtucPerfLof;
-       int AtucPerfLos;
-       int AtucPerfEs;
-       int AtucPerfInit;
-       
-       int AturPerfLof;
-       int AturPerfLos;
-       int AturPerfLpr;
-       int AturPerfEs;
-       
-       int AturChanPerfRxBlk;
-       int AturChanPerfTxBlk;
-       int AturChanPerfCorrBlk;
-       int AturChanPerfUncorrBlk;
-       
-       //RFC-3440
-       int AtucPerfStatFastR;
-       int AtucPerfStatFailedFastR;
-       int AtucPerfStatSesL;
-       int AtucPerfStatUasL;
-       int AturPerfStatSesL;
-       int AturPerfStatUasL;
-}amazon_mei_mib;
-
-typedef struct adslChanPrevTxRate{
-       u32 adslAtucChanPrevTxRate;
-       u32 adslAturChanPrevTxRate;
-}adslChanPrevTxRate;
-
-typedef struct adslPhysCurrStatus{
-       u32 adslAtucCurrStatus;
-       u32 adslAturCurrStatus;
-}adslPhysCurrStatus;
-
-typedef struct ChanType{
-       int interleave;
-       int fast;
-// 603221:tc.chen start
-       int bearchannel0;
-       int bearchannel1;
-// 603221:tc.chen end
-}ChanType;
-
-typedef struct mib_previous_read{
-       u16 ATUC_PERF_ESS;
-       u16 ATUR_PERF_ESS;
-       u32 ATUR_CHAN_RECV_BLK;
-       u16 ATUR_CHAN_CORR_BLK_INTL;
-       u16 ATUR_CHAN_CORR_BLK_FAST;
-       u16 ATUR_CHAN_UNCORR_BLK_INTL;
-       u16 ATUR_CHAN_UNCORR_BLK_FAST;
-       u16 ATUC_PERF_STAT_FASTR;
-       u16 ATUC_PERF_STAT_FAILED_FASTR;
-       u16 ATUC_PERF_STAT_SESL;
-       u16 ATUC_PERF_STAT_UASL;
-       u16 ATUR_PERF_STAT_SESL;
-}mib_previous_read;
-
-typedef struct mib_flags_pretime{
-       struct timeval ATUC_PERF_LOSS_PTIME;
-       struct timeval ATUC_PERF_LOFS_PTIME;
-       struct timeval ATUR_PERF_LOSS_PTIME;
-       struct timeval ATUR_PERF_LOFS_PTIME;
-       struct timeval ATUR_PERF_LPR_PTIME;
-}mib_flags_pretime;
-
-                //  cmv message structures
-#define        MP_PAYLOAD_SIZE                                 12
-typedef        struct mpmessage{
-       u16     iFunction;
-       u16     iGroup;
-       u16     iAddress;
-       u16     iIndex;
-       u16     iPayload[MP_PAYLOAD_SIZE];
-}MPMessage;
-#endif
-
-
-typedef struct meireg{
-       u32 iAddress;
-       u32 iData;
-}meireg;
-
-#define MEIDEBUG_BUFFER_SIZES 50
-typedef struct meidebug{
-       u32 iAddress;
-       u32 iCount;
-       u32 buffer[MEIDEBUG_BUFFER_SIZES];
-}meidebug;
-
-//==============================================================================
-// Group definitions                                                              
-//==============================================================================
-#define OPTN                    5
-#define CNFG                    8
-#define CNTL                    1
-#define STAT                    2
-#define RATE                    6
-#define PLAM                    7
-#define INFO                    3
-#define TEST                   4
-//==============================================================================
-// Opcode definitions
-//==============================================================================
-#define H2D_CMV_READ                            0x00
-#define H2D_CMV_WRITE                           0x04
-#define H2D_CMV_INDICATE_REPLY                  0x10
-#define H2D_ERROR_OPCODE_UNKNOWN               0x20
-#define H2D_ERROR_CMV_UNKNOWN                  0x30
-
-#define D2H_CMV_READ_REPLY                             0x01
-#define D2H_CMV_WRITE_REPLY                     0x05
-#define D2H_CMV_INDICATE                        0x11
-#define D2H_ERROR_OPCODE_UNKNOWN                0x21
-#define D2H_ERROR_CMV_UNKNOWN                   0x31
-#define D2H_ERROR_CMV_READ_NOT_AVAILABLE        0x41
-#define D2H_ERROR_CMV_WRITE_ONLY                0x51
-#define D2H_ERROR_CMV_READ_ONLY                 0x61
-
-#define H2D_DEBUG_READ_DM                       0x02
-#define H2D_DEBUG_READ_PM                       0x06
-#define H2D_DEBUG_WRITE_DM                      0x0a
-#define H2D_DEBUG_WRITE_PM                      0x0e
-
-#define D2H_DEBUG_READ_DM_REPLY                0x03
-#define D2H_DEBUG_READ_FM_REPLY                0x07
-#define D2H_DEBUG_WRITE_DM_REPLY               0x0b
-#define D2H_DEBUG_WRITE_FM_REPLY               0x0f
-#define D2H_ERROR_ADDR_UNKNOWN                 0x33
-
-#define D2H_AUTONOMOUS_MODEM_READY_MSG         0xf1
-//==============================================================================
-// INFO register address field definitions
-//==============================================================================
-
-#define INFO_TxState                                   0
-#define INFO_RxState                                   1
-#define INFO_TxNextState                               2
-#define INFO_RxNextState                               3
-#define INFO_TxStateJumpFrom                           4
-#define INFO_RxStateJumpFrom                           5
-
-#define INFO_ReverbSnrBuf                              8
-#define INFO_ReverbEchoSnrBuf                          9
-#define INFO_MedleySnrBuf                              10
-#define INFO_RxShowtimeSnrBuf                          11
-#define INFO_DECdelay                                  12
-#define INFO_DECExponent                               13
-#define INFO_DECTaps                                   14
-#define INFO_AECdelay                                  15
-#define INFO_AECExponent                               16
-#define INFO_AECTaps                                   17
-#define INFO_TDQExponent                               18
-#define INFO_TDQTaps                                   19
-#define INFO_FDQExponent                               20
-#define INFO_FDQTaps                                   21
-#define INFO_USBat                                     22
-#define INFO_DSBat                                     23
-#define INFO_USFineGains                               24
-#define INFO_DSFineGains                               25
-#define INFO_BitloadFirstChannel                       26
-#define INFO_BitloadLastChannel                                27
-#define INFO_PollEOCData                               28              // CO specific
-#define INFO_CSNRMargin                                        29              // CO specific
-#define INFO_RCMsgs1                                   30
-#define INFO_RMsgs1                                    31
-#define INFO_RMsgRA                                    32
-#define INFO_RCMsgRA                                   33
-#define INFO_RMsg2                                     34
-#define INFO_RCMsg2                                    35
-#define INFO_BitLoadOK                                 36
-#define INFO_RCRates1                                  37
-#define INFO_RRates1Tab                                        38
-#define INFO_RMsgs1Tab                                 39
-#define INFO_RMsgRATab                                 40
-#define INFO_RRatesRA                                  41
-#define INFO_RCRatesRA                                 42
-#define INFO_RRates2                                   43
-#define INFO_RCRates2                                  44
-#define INFO_PackedRMsg2                               45
-#define INFO_RxBitSwapFlag                             46
-#define INFO_TxBitSwapFlag                             47
-#define INFO_ShowtimeSNRUpdateCount                    48
-#define INFO_ShowtimeFDQUpdateCount                    49
-#define INFO_ShowtimeDECUpdateCount                    50
-#define INFO_CopyRxBuffer                              51
-#define INFO_RxToneBuf                                 52
-#define INFO_TxToneBuf                                  53
-#define INFO_Version                                   54
-#define INFO_TimeStamp                                  55
-#define INFO_feVendorID                                        56
-#define INFO_feSerialNum                               57
-#define INFO_feVersionNum                              58
-#define INFO_BulkMemory                                        59      //Points to start of bulk memory
-#define INFO_neVendorID                                 60
-#define INFO_neVersionNum                              61
-#define INFO_neSerialNum                               62
-
-//==============================================================================
-// RATE register address field definitions
-//==============================================================================
-
-
-#define RATE_UsRate                                    0
-#define RATE_DsRate                                    1
-
-
-//==============================================================================
-// PLAM (Physical Layer Management) register address field definitions
-//     (See G997.1 for reference)
-//==============================================================================
-
-
-       //                                      ///
-       // Failure Flags        ///
-       //                                      ///
-
-#define PLAM_NearEndFailureFlags               0
-#define PLAM_FarEndFailureFlags                        1
-
-       //                                                                      ///
-       // Near End Failure Flags Bit Definitions       ///
-       //                                                                      ///
-
-// ADSL Failures ///
-#define PLAM_LOS_FailureBit                            0x0001
-#define PLAM_LOF_FailureBit                            0x0002
-#define PLAM_LPR_FailureBit                            0x0004
-#define PLAM_RFI_FailureBit                            0x0008
-
-// ATM Failures ///
-#define PLAM_NCD_LP0_FailureBit                                0x0010
-#define PLAM_NCD_LP1_FailureBit                                0x0020
-#define PLAM_LCD_LP0_FailureBit                                0x0040
-#define PLAM_LCD_LP1_FailureBit                                0x0080
-
-#define PLAM_NCD_BC0_FailureBit                                0x0100
-#define PLAM_NCD_BC1_FailureBit                                0x0200
-#define PLAM_LCD_BC0_FailureBit                                0x0400
-#define PLAM_LCD_BC1_FailureBit                                0x0800
-       //                                              ///
-       // Performance Counts   ///
-       //                                              ///
-
-#define PLAM_NearEndCrcCnt                             2
-#define PLAM_CorrectedRSErrors                         3
-
-#define PLAM_NearEndECSCnt                             6
-#define PLAM_NearEndESCnt                              7
-#define PLAM_NearEndSESCnt                             8
-#define PLAM_NearEndLOSSCnt                            9
-#define PLAM_NearEndUASLCnt                            10
-
-#define PLAM_NearEndHECErrCnt                          11
-
-#define PLAM_NearEndHECTotCnt                          16
-#define PLAM_NearEndCellTotCnt                         18
-#define PLAM_NearEndSfCntLSW                           20
-#define PLAM_NearEndSfCntMSW                           21
-
-#define PLAM_FarEndFebeCnt                             24
-
-#define PLAM_FarEndFecCnt                              28
-
-#define PLAM_FarEndFECSCnt                             32
-#define PLAM_FarEndESCnt                               33
-#define PLAM_FarEndSESCnt                              34
-#define PLAM_FarEndLOSSCnt                             35
-#define PLAM_FarEndUASLCnt                             36
-
-#define PLAM_FarEndHECErrCnt                           37
-
-#define PLAM_FarEndHECTotCnt                           41
-
-#define PLAM_FarEndCellTotCnt                          43
-
-#define PLAM_LineAttn                                  45
-#define PLAM_SNRMargin                                 46
-
-
-//==============================================================================
-// CNTL register address and bit field definitions
-//==============================================================================
-
-
-#define CNTL_ModemControl                              0
-
-#define CNTL_ModemReset                                        0x0
-#define CNTL_ModemStart                                        0x2
-
-
-//==============================================================================
-// STAT register address and bit field definitions
-//==============================================================================
-
-#define STAT_MacroState                                        0
-#define STAT_Mode                                      1
-#define STAT_DMTFramingMode                            2
-#define STAT_SleepState                                        3
-#define STAT_Misc                                      4
-#define STAT_FailureState                              5
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_OLRStatus provides status of OLR
- //16-bit STAT_OLRStatus_DS
- //  [1:0]     :       OLR status 00=IDLE,  01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
- //  [3:2]:            Reserved
- //  [5:4]:            OLR_Type (1:bitswap; 2: DRR; 3: SRA)
- //  [7:6]:            Reserved
- //  [10:8]:           >0=Request. 0=not.   For DS, # of request transmissions/retransmissions (3 bits).
- //  [11]:             1=Receive Response, 0=not
- //  [15:12]:  Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_OLRStatus_DS                              6
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_OLRStatus provides status of OLR
- // 16-bit STAT_OLRStatus_US CMV
- //  [1:0]     :       OLR status 00=IDLE,  01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
- //  [3:2]:            Reserved
- //  [5:4]:            OLR_Type (1:bitswap; 2: DRR; 3: SRA)
- //  [7:6]:            Reserved
- //  [8]:              1=Request Received. 0=not.
- //  [10:9]:     Reserved
- //  [11]:             1=Response Sent, 0=not
- //  [15:12]:  Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-///
-#define STAT_OLRStatus_US                              7
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_PMStatus provides status of PM
- // 16-bit STAT_PMStatus CMV
- //  [1:0]     :       PM Status 00=IDLE,  01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted
- //  [2] :             0=ATU_R initiated PM; 1 = ATU_C initiated PM
- //  [3]:              Reserved
- //  [5:4]:            PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim)
- //  [7:6]:            Reserved
- //  [10:8]:           >0=Request. 0=not.   # of request transmissions/retransmissions (3 bits).
- //  [11]:             1=Response, 0=not
- //  [15:12]:  Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_PMStatus                                  8
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError
- // [3:0]:          OLR/PM response reason code
- // [7:4]:            OLR/PM Internal error code
- // [15:8]:         OLR/PM Reserved for future
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_OLRError_DS                               9
-#define STAT_OLRError_US                               10
-#define STAT_PMError                                   11
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_MacroState
-// MacroState reflects the high level state of the modem
-
-#define STAT_InitState                         0x0000
-#define STAT_ReadyState                                0x0001
-#define STAT_FailState                         0x0002
-#define STAT_IdleState                         0x0003
-#define STAT_QuietState                                0x0004
-#define STAT_GhsState                          0x0005
-#define STAT_FullInitState                     0x0006
-#define STAT_ShowTimeState                     0x0007
-#define STAT_FastRetrainState                  0x0008
-#define STAT_LoopDiagMode                      0x0009
-#define STAT_ShortInit                         0x000A     // Bis short initialization ///
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_Mode
-// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use
-// G.Hs or some other mechanism to negotiate the specific mode of operation.
-// The OPTN_modeControl CMV is used to select a set of desired modes.
-// The STAT_Mode CMV indicates which mode was actually selected.
-
-#define STAT_ConfigMode_T1413                  0x0001
-#define STAT_ConfigMode_G992_2_AB              0x0002
-#define STAT_ConfigMode_G992_1_A               0x0004
-#define STAT_ConfigMode_G992_1_B               0x0008
-#define STAT_ConfigMode_G992_1_C               0x0010
-#define STAT_ConfigMode_G992_2_C               0x0020
-
-#define STAT_ConfigMode_G992_3_A               0x0100
-#define STAT_ConfigMode_G992_3_B               0x0200
-#define STAT_ConfigMode_G992_3_I               0x0400
-#define STAT_ConfigMode_G992_3_J               0x0800
-#define STAT_ConfigMode_G992_3_L               0x1000
-
-#define STAT_ConfigMode_G992_4_A               0x2000
-#define STAT_ConfigMode_G992_4_I               0x4000
-
-#define STAT_ConfigMode_G992_5                 0x8000
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_DMTFramingMode
-// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode
-// status is not applicable in BIS mode and its value is undefined
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_FramingModeMask                   0x0003
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_Misc
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_OverlappedSpectrum                0x0008
-#define STAT_TCM                       0x0010
-#define STAT_TDQ_at_1104               0x0020
-#define STAT_T1413_Signal_Detected     0x0040
-#define STAT_AnnexL_US_Mask1_PSD       0x1000  //indicate we actually selected G992.3 AnnexL US PSD mask1
-#define STAT_AnnexL_US_Mask2_PSD       0x2000  //indicate we actually selected G992.3 AnnexL US PSD mask2
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_FailureState
-// when the MacroSTate indicates the fail state, FailureState provides a failure code
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-
-#define E_CODE_NO_ERROR                                                                0
-#define E_CODE_BAT_TX                                                          1               // TX BAT table is incorrect */
-#define E_CODE_BAT_RX                                                          2               //  RX BAT table is incorrect */
-#define E_CODE_PROFILE                                                         3               //  profile is not selected in fast retrain */
-#define E_CODE_TX_AOC_FIFO_OVERFLOW                                            4
-#define E_CODE_TRUNCATE_FR                                                     5               //Fast Retrain truncated due to no stored profiles*/
-#define E_CODE_BITLOAD                                                         6               //  bit loading fails */
-#define E_CODE_ST_ERROR                                                                7               //  showtime CRC error */
-#define E_CODE_RESERVED                                                                8       //  using parameters reserved by the ITU-T */
-#define E_CODE_C_TONES                                                         9               //  detected C_TONES */
-#define E_CODE_CODESWAP_ERR                                                    10      //  codeswap not finished in time */
-#define E_CODE_FIFO_OVERFLOW                                                   11      // we have run out of fifo space */
-#define E_CODE_C_BG_DECODE_ERR                                                 12      // error in decoding C-BG message */
-#define E_CODE_C_RATES2_DECODE_ERR                                             13      // error in decoding C-MSGS2 and C-RATES2 */
-#define E_CODE_RCMedleyRx_C_SEGUE2_Failure                                     14              //  Timeout after RCMedleyRx waiting for C_SEGUE2 */
-#define E_CODE_RReverbRATx_C_SEGUE2_Failure                                    15              //  Timeout after RReverbRATx waiting for C_SEGUE2 */
-#define E_CODE_RReverb3Tx_C_SEGUE1_Failure                                     16              //  Timeout after RReverb3Tx waiting for C_SEGUE1 */
-#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR                                     17              //  Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR                                     18              //  Received CRC not equal to computed CRC */
-#define E_CODE_RReverb5Tx_C_SEGUE2_Failure                                     19              //  Timeout after RReverb5Tx waiting for C_SEGUE2 */
-#define E_CODE_RReverb6Tx_C_SEGUE3_Failure                                     20              //  Timeout after RReverb6Tx waiting for C_SEGUE3 */
-#define E_CODE_RSegue5Tx_C_SEGUE3_Failure                                      21              //  Timeout after RSegue5Tx waiting for C_SEGUE3 */
-#define E_CODE_RCReverb5Rx_C_SEGUE_Failure                                     22              //  Timeout after RCReverb5Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbRARx_C_SEGUE2_Failure                                   23              //  Timeout after RCReverbRARx waiting for C_SEGUE2 */
-#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR                                       24              //  Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR                                         25              //  Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC3Rx_DECOD_ERR                                              26              //  Received CRC not equal to computed CRC */
-#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT                                   27              //  DEC Path Delay timeout */
-#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT                                   28              //  DEC Training timeout */
-#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure                                    29              //  Timeout after RCReverb3Rx waiting for C_SEGUE1 */
-#define E_CODE_RCReverb2Rx_SignalEnd_Failure                                   30              //  Timeout waiting for the end of RCReverb2Rx signal */
-#define E_CODE_RQuiet2_SignalEnd_Failure                                       31              //  Timeout waiting for the end of RQuiet2 signal */
-#define E_CODE_RCReverbFR1Rx_Failure                                           32              //  Timeout waiting for the end of RCReverbFR1Rx signal */
-#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure                                  33              //  Timeout waiting for the end of RCPilotFR1Rx signal */
-#define E_CODE_RCReverbFR2Rx_C_Segue_Failure                                   34              //  Timeout after RCReverbFR2Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT                                 35              //  Timeout waiting for the end of RCReverbFR5Rx signal */
-#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure                                   36              //  Timeout after RCReverbFR6Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure                               37              //  Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */
-#define E_CODE_RCReverbFR8Rx_No_PROFILE                                                38              //  Timeout since no profile was selected */
-#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT                                 39              //  Timeout waiting for the end of RCReverbFR8Rx signal */
-#define E_CODE_RCCRCFR1_DECOD_ERR                                              40              //  Received CRC not equal to computed CRC */
-#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT                                    41              //  Timeout waiting for the end of RCRecovRx signal */
-#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT                                        42              //  Timeout after RSegueFR5Tx waiting for C_SEGUE2 */
-#define E_CODE_RRecovTx_SignalEnd_TIMEOUT                                      43              //  Timeout waiting for the end of RRecovTx signal */
-#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure                                   44              //  Timeout after RCMedleyFRRx waiting for C_SEGUE2 */
-#define E_CODE_CONFIGURATION_PARAMETERS_ERROR                                  45              // one of the configuration parameters do not meet the standard */
-#define E_CODE_BAD_MEM_ACCESS                                                  46
-#define E_CODE_BAD_INSTRUCTION_ACCESS                                          47
-#define E_CODE_TX_EOC_FIFO_OVERFLOW                                            48
-#define E_CODE_RX_EOC_FIFO_OVERFLOW                                            49
-#define E_CODE_GHS_CD_FLAG_TIME_OUT                                            50      // Timeout when transmitting Flag in handshake cleardown */
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//STAT_OLRStatus:
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_OLRPM_IDLE                                 0x0000
-#define STAT_OLRPM_IN_PROGRESS                          0x0001
-#define STAT_OLRPM_COMPLETE                             0x0002
-#define STAT_OLRPM_ABORTED                              0x0003
-#define STAT_OLRPM_RESPONSE                            0x0800
-
-#define STAT_OLR_BITSWAP                                0x0010
-#define STAT_OLR_DRR                                   0x0020
-#define STAT_OLR_SRA                                   0x0030
-
-//STAT_PMStatus_US:
-#define STAT_PM_CO_REQ                                  0x0004
-#define STAT_PM_SIMPLE_REQ                              0x0010
-#define STAT_PM_L2_REQ                                 0x0020
-#define STAT_PM_L2_TRIM_REQ                            0x0030
-
-// STAT_OLRError_DS, STAT_OLRError_US
-//4 bit response reason code:
-#define RESP_BUSY                                      0x01
-#define RESP_INVALID_PARAMETERS                                0x02
-#define RESP_NOT_ENABLED                               0x03
-#define RESP_NOT_SUPPORTED                             0x04
-
-//4 bit internal error code (common for OLR and PM)
-#define REQ_INVALID_BiGi                               0x10
-#define REQ_INVALID_Lp                                 0x20
-#define REQ_INVALID_Bpn                                        0x30
-#define REQ_INVALID_FRAMING_CONSTRAINT                 0x40
-#define REQ_NOT_IN_L0_STATE                            0x50
-#define REQ_NOT_IN_L2_STATE                            0x60
-#define REQ_INVALID_PCB                                        0x70
-#define REQ_VIOLATES_MARGIN                            0x80
-
-//STAT_PMError
-//4 bit response reason code:
-#define RESP_STATE_NOT_DESIRED                          0x03
-#define RESP_INFEASIBLE_PARAMETERS                      0x04
-
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN register address and bit field definitions
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_ModeControl                               0
-#define OPTN_DMTLnkCtl                                 1
-// Reserved                                            2
-#define OPTN_GhsControl                                        3
-// Reserved                                            4
-#define OPTN_PwrManControl                             5
-#define OPTN_AnnexControl                              6
-#define OPTN_ModeControl1                              7
-// Reserved                                            8
-#define OPTN_StateMachineCtrl                          9
-// Reserved                                            10
-// Reserved                                            11
-#define OPTN_BisLinkControl                            12
-#define OPTN_ATMAddrConfig                             13
-#define OPTN_ATMNumCellConfig                          14
-
-// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may ///
-// use G.Hs or some other mechanism to negotiate the specific mode of operation. ///
-// The OPTN_ModeControl CMV is used to select a set of desired modes ///
-// The STAT_ModeControl CMV indicates which mode was actually selected ///
-
-// OPTN_ModeControl
-#define OPTN_ConfigMode_T1413                  0x0001
-#define OPTN_ConfigMode_G992_2_AB              0x0002
-#define OPTN_ConfigMode_G992_1_A               0x0004
-#define OPTN_ConfigMode_G992_1_B               0x0008
-#define OPTN_ConfigMode_G992_1_C               0x0010
-#define OPTN_ConfigMode_G992_2_C               0x0020
-
-#define OPTN_ConfigMode_G992_3_A               0x0100
-#define OPTN_ConfigMode_G992_3_B               0x0200
-#define OPTN_ConfigMode_G992_3_I               0x0400
-#define OPTN_ConfigMode_G992_3_J               0x0800
-#define OPTN_ConfigMode_G992_3_L               0x1000
-
-#define OPTN_ConfigMode_G992_4_A               0x2000
-#define OPTN_ConfigMode_G992_4_I               0x4000
-
-#define OPTN_ConfigMode_G992_5                 0x8000
-
-// OPTN_PwrManControl
-#define OPTN_PwrManWakeUpGhs                   0x1
-#define OPTN_PwrManWakeUpFR                    0x2
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_DMT Link Control
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define OPTN_DMT_DualLatency_Dis                0x200
-#define OPTN_DMT_S_Dis                          0x100
-#define OPTN_DMT_FRAMINGMODE                   0x1
-#define OPTN_DMT_FRAMINGMODE_MASK              0x7
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_BIS Link Control
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define OPTN_BisLinkContrl_LineProbeDis         0x1
-#define OPTN_BisLinkContrl_DSBlackBitsEn        0x2
-#define OPTN_BisLinkContrl_DiagnosticModeEn     0x4
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_GhsControl
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//
-// for OPTN_GhsControl, we will assign 16bit word as follows
-// bit 0~3: set the control over which start(initial) message CPE will send:
-//
-//             BIT: 2  1  0
-//                      0  0  1  CLR
-//                      0  1  0  MR
-//                      0  1  1  MS
-//                      1  0  0  MP
-//
-//  // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange
-//        BIT: 5  4
-//                  0  1  MS
-//                      1  0  MR
-//                      1  1  MP
-//
-//  // bit 15: RT initiated G.hs sample sessions one through eight.  Session one is default.
-//        BIT: 15
-//                       1  means session one
-//
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_GHS_ST_GHS                                        0x8000
-#define OPTN_GHS_INIT_MASK                             0x000F
-#define OPTN_GHS_RESP_MASK                             0x00F0
-
-#define OPTN_RTInitTxMsg_CLR                           0x0001
-#define OPTN_RTInitTxMsg_MR                            0x0002
-#define OPTN_RTInitTxMsg_MS                            0x0003
-#define OPTN_RTInitTxMsg_MP                            0x0004
-
-#define OPTN_RTRespTxMsg_MS                            0x0010
-#define OPTN_RTRespTxMsg_MR                            0x0020
-#define OPTN_RTRespTxMsg_MP                            0x0030
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//     OPTN_AnnexControl
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-
-// G.992.3 Annex A/L1/L2 US PSD Mask preferred
-
-#define OPTN_G992_3_AnnexA_PreferredModeMask           0x3000
-#define OPTN_G992_3_AnnexA_PreferredModeA              0x0000         // default AnnexA PSD mask ///
-#define OPTN_G992_3_AnnexA_PreferredModeL1             0x1000             // AnnexL wide spectrum upstream PSD mask ///
-#define OPTN_G992_3_AnnexA_PreferredModeL2             0x2000             // AnnexL narrow spectrum upstream PSD mask ///
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//OPTN_ATMAddrConfig
-// Bits 4:0            are Utopia address for BC1
-// Bits 9:5            are Utopia address for BC0
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_UTPADDR_BC1                               0x001F
-#define OPTN_UTPADDR_BC0                               0x03E0
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//OPTN_ATMNumCellConfig
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_BC1_NUM_CELL_PAGES                                0x000F // Bits 0:3 ///
-#define OPTN_BC0_NUM_CELL_PAGES                                0x00F0 // Bits 4:7 ///
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// CNFG register address field ///
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////
-// these cmvs are used by bis handshake ///
-///////////////////////////////////////////
-
-// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t)
-#define CNFG_TPS_TC_DS0                                        0
-#define CNFG_TPS_TC_DS1                                        1
-#define CNFG_TPS_TC_US0                                        2
-#define CNFG_TPS_TC_US1                                        3
-
-#define CNFG_HDLC_Overhead_Requirements                        4
-
-// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t)
-#define CNFG_PMS_TC_DS0                                        5
-#define CNFG_PMS_TC_DS1                                        6
-#define CNFG_PMS_TC_US0                                        7
-#define CNFG_PMS_TC_US1                                        8
-
-// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t)
-#define CNFG_PMD_PARAMETERS                            9
-
-////////////////////////////////////////////////////////////
-// these cmvs are used by bis training and showtime code ///
-////////////////////////////////////////////////////////////
-
-////////////////
-// Tx Config ///
-////////////////
-#define CNFG_tx_Cnfg_Nbc                               10
-#define CNFG_tx_Cnfg_Nlp                               11
-#define CNFG_tx_Cnfg_Rp                                        12
-#define CNFG_tx_Cnfg_Mp                                        13
-#define CNFG_tx_Cnfg_Lp                                        14
-#define CNFG_tx_Cnfg_Tp                                        15
-#define CNFG_tx_Cnfg_Dp                                        16
-#define CNFG_tx_Cnfg_Bpn                               17
-#define CNFG_tx_Cnfg_FramingMode                       18
-#define CNFG_tx_Cnfg_MSGLp                             19
-#define CNFG_tx_Cnfg_MSGc                              20
-
-
-////////////////
-// Rx Config ///
-////////////////
-#define CNFG_rx_Cnfg_Nbc                               21
-#define CNFG_rx_Cnfg_Nlp                               22
-#define CNFG_rx_Cnfg_Rp                                        23
-#define CNFG_rx_Cnfg_Mp                                        24
-#define CNFG_rx_Cnfg_Lp                                        25
-#define CNFG_rx_Cnfg_Tp                                        26
-#define CNFG_rx_Cnfg_Dp                                        27
-#define CNFG_rx_Cnfg_Bpn                               28
-#define CNFG_rx_Cnfg_FramingMode                       29
-#define CNFG_rx_Cnfg_MSGLp                             30
-#define CNFG_rx_Cnfg_MSGc                              31
-
-#define CNFG_tx_Cnfg_BCnToLPp                          32
-#define CNFG_rx_Cnfg_BCnToLPp                          33
-
-
-
-#endif
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h
deleted file mode 100644 (file)
index 1327381..0000000
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef AMAZON_SW_H
-#define AMAZON_SW_H
-#define SET_ETH_SPEED_AUTO   SIOCDEVPRIVATE
-#define SET_ETH_SPEED_10     SIOCDEVPRIVATE+1
-#define SET_ETH_SPEED_100    SIOCDEVPRIVATE+2
-#define SET_ETH_DUPLEX_AUTO  SIOCDEVPRIVATE+3
-#define SET_ETH_DUPLEX_HALF  SIOCDEVPRIVATE+4
-#define SET_ETH_DUPLEX_FULL  SIOCDEVPRIVATE+5
-#define SET_ETH_REG          SIOCDEVPRIVATE+6          
-#define VLAN_TOOLS           SIOCDEVPRIVATE+7
-#define MAC_TABLE_TOOLS      SIOCDEVPRIVATE+8 
-
-
-/*===mac table commands==*/
-#define RESET_MAC_TABLE     0
-#define READ_MAC_ENTRY    1
-#define WRITE_MAC_ENTRY   2
-#define ADD_MAC_ENTRY     3
-
-/*====vlan commands===*/
-
-#define CHANGE_VLAN_CTRL     0
-#define READ_VLAN_ENTRY      1
-#define UPDATE_VLAN_ENTRY    2
-#define CLEAR_VLAN_ENTRY     3
-#define RESET_VLAN_TABLE     4
-#define ADD_VLAN_ENTRY       5
-
-/* 
-** MDIO constants.
-*/
-
-#define MDIO_BASE_STATUS_REG                0x1
-#define MDIO_BASE_CONTROL_REG               0x0
-#define MDIO_PHY_ID_HIGH_REG                0x2
-#define MDIO_PHY_ID_LOW_REG                 0x3
-#define MDIO_BC_NEGOTIATE                0x0200
-#define MDIO_BC_FULL_DUPLEX_MASK         0x0100
-#define MDIO_BC_AUTO_NEG_MASK            0x1000
-#define MDIO_BC_SPEED_SELECT_MASK        0x2000
-#define MDIO_STATUS_100_FD               0x4000
-#define MDIO_STATUS_100_HD               0x2000
-#define MDIO_STATUS_10_FD                0x1000
-#define MDIO_STATUS_10_HD                0x0800
-#define MDIO_STATUS_SPEED_DUPLEX_MASK   0x7800
-#define MDIO_ADVERTISMENT_REG               0x4
-#define MDIO_ADVERT_100_FD                0x100
-#define MDIO_ADVERT_100_HD                0x080
-#define MDIO_ADVERT_10_FD                 0x040
-#define MDIO_ADVERT_10_HD                 0x020
-#define MDIO_LINK_UP_MASK                   0x4
-#define MDIO_START                          0x1
-#define MDIO_READ                           0x2
-#define MDIO_WRITE                          0x1
-#define MDIO_PREAMBLE              0xfffffffful
-
-#define PHY_RESET                        0x8000 
-#define AUTO_NEGOTIATION_ENABLE          0X1000
-#define AUTO_NEGOTIATION_COMPLETE          0x20
-#define RESTART_AUTO_NEGOTIATION          0X200
-
-
-#define PHY0_ADDR    0
-#define PHY1_ADDR    1
-#define P1M          0
-
-#define AMAZON_SW_REG32(reg_num) *((volatile u32*)(reg_num))
-
-#define OK 0;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-typedef struct mac_table_entry{
-   u64 mac_address:48;
-   u64 p0:1;
-   u64 p1:1;
-   u64 p2:1;
-   u64 cr:1;
-   u64 ma_st:3;
-   u64 res:9;
-}_mac_table_entry;
-
-typedef struct IFX_Switch_VLanTableEntry{
-    u32 vlan_id:12;
-    u32 mp0:1;
-    u32 mp1:1;
-    u32 mp2:1;
-    u32 v:1;
-    u32 res:16;
-}_IFX_Switch_VLanTableEntry;
-
-typedef struct mac_table_req{
-    int cmd;
-    int index;
-    u32 data;
-    u64 entry_value;
-}_mac_table_req;
-
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-typedef struct mac_table_entry{
-   u64 mac_address:48;
-   u64 p0:1;
-   u64 p1:1;
-   u64 p2:1;
-   u64 cr:1;
-   u64 ma_st:3;
-   u64 res:9;
-}_mac_table_entry;
-
-typedef struct IFX_Switch_VLanTableEntry{
-    u32 vlan_id:12;
-    u32 mp0:1;
-    u32 mp1:1;
-    u32 mp2:1;
-    u32 v:1;
-    u32 res:16;
-}_IFX_Switch_VLanTableEntry;
-
-
-typedef struct mac_table_req{
-    int cmd;
-    int index;
-    u32 data;
-    u64 entry_value;
-}_mac_table_req;
-
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-
-
-typedef struct vlan_req{
-    int cmd;
-    int index;
-    u32 data;
-    u32 entry_value;
-}_vlan_req;
-
-typedef struct data_req{
-    int index;
-    u32 value;
-}_data_req;
-
-enum duplex
-{
-   half,
-   full,
-   autoneg
-};
-
-struct switch_priv {
-    struct net_device_stats stats;
-    int rx_packetlen;
-    u8 *rx_packetdata;
-    int rx_status;
-    int tx_packetlen;
-#ifdef CONFIG_NET_HW_FLOWCONTROL    
-    int fc_bit;
-#endif //CONFIG_NET_HW_FLOWCONTROL    
-    u8 *tx_packetdata;
-    int tx_status;
-    struct dma_device_info *dma_device;
-    struct sk_buff *skb;
-    spinlock_t lock;
-    int mdio_phy_addr;
-    int current_speed;
-    int current_speed_selection;
-    int rx_queue_len;
-    int full_duplex;
-    enum duplex current_duplex;
-    int num;
-};
-
-#endif //AMAZON_SW_H
-
-
-
-
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h
deleted file mode 100644 (file)
index a64e6f9..0000000
+++ /dev/null
@@ -1,258 +0,0 @@
-#ifndef AMAZON_TPE_H
-#define AMAZON_TPE_H
-#include <linux/atm.h>
-#include <linux/atmdev.h>
-#include <linux/netdevice.h>
-#include <linux/ioctl.h>
-
-#ifdef CONFIG_IFX_ATM_MIB
-/* For ATM-MIB lists */
-#include <linux/list.h>
-#endif
-#include <asm/amazon/atm_mib.h>
-
-/* CBM Queue arranagement
- * Q0: free cells pool
- * Q1~ Q15: upstream queues
- * Q16: QAM downstream
- * Q17~Q31: downstream queues
- */
-#define        AMAZON_ATM_MAX_QUEUE_NUM        32
-#define        AMAZON_ATM_PORT_NUM             2
-#define        AMAZON_ATM_FREE_CELLS           4000
-#define        AMAZON_ATM_MAX_VCC_NUM          (AMAZON_ATM_MAX_QUEUE_NUM/2 - 1)
-#define AMAZON_AAL0_SDU                (ATM_AAL0_SDU+4)                                //one more word for status
-#define CBM_RX_OFFSET                  16                                              //offset from the same q for tx
-#define        AMAZON_ATM_OAM_Q_ID             16
-#define        AMAZON_ATM_RM_Q_ID              16
-#define        AMAZON_ATM_OTHER_Q_ID           16
-#define        CBM_DEFAULT_Q_OFFSET            1
-#define        HTUTIMEOUT                      0xffff//timeoutofhtutocbm
-#define        QSB_WFQ_NONUBR_MAX              0x3f00
-#define        QSB_WFQ_UBR_BYPASS              0x3fff
-#define        QSB_TP_TS_MAX                   65472
-#define        QSB_TAUS_MAX                    64512
-#define QSB_GCR_MIN                    18
-#define HTU_RAM_ACCESS_MAX             1024//maxium time for HTU RAM access
-
-#define SWIE_LOCK              1
-#define        PROC_ATM                1
-#define        PROC_MIB                2
-#define PROC_VCC               3
-#define PROC_AAL5               4
-#define PROC_CBM                5
-#define PROC_HTU                6
-#define PROC_QSB                7
-#define PROC_SWIE               8
-
-/***************** internal data structure ********************/
-typedef int (*push_back_t)(struct atm_vcc *vcc,struct sk_buff *skb,int err) ;
-/* Device private data */
-typedef struct{
-       u8      padding_byte;
-       u32     tx_max_sdu;
-       u32     rx_max_sdu;
-       u32     cnt_cpy;                //no. of packets that need a copy due to alignment
-}amazon_aal5_dev_t;
-
-typedef struct{
-       u32     max_q_off;              //maxium queues used in real scenario
-       u32     nrt_thr;
-       u32     clp0_thr;
-       u32     clp1_thr;
-       u32     free_cell_cnt;
-#ifdef CONFIG_USE_VENUS        
-       u8 *    qd_addr_free;   //to work around a bug, bit15 of QDOFF address should be 1
-#endif
-       u8 *    qd_addr;
-       u8 *    mem_addr;
-       u8      allocated;
-}amazon_cbm_dev_t;
-
-typedef struct{
-
-}amazon_htu_dev_t;
-
-typedef struct{
-       u32     tau;                    //cell delay variation due to concurrency(?)
-       u32     tstepc;                 //time step, all legal values are 1,2,4
-       u32     sbl;                    //scheduler burse length (for PHY)
-}amazon_qsb_dev_t;
-
-typedef struct{
-       u32     qid;                    //QID of the current extraction queue
-       struct semaphore in_sem;        // Software-Insertion semaphore
-       volatile long   lock;           //lock that avoids race contions between SWIN and SWEX
-       wait_queue_head_t sleep;        //wait queue for SWIE and SWEX
-       u32 sw;                 //status word
-}amazon_swie_dev_t;
-
-//AAL5 MIB Counter
-typedef struct{
-       u32     tx,rx;                  //number AAL5 CPCS PDU from/to higher-layer
-       u32     tx_err,rx_err;          //ifInErrors and ifOutErros
-       u32     tx_drop,rx_drop;        //discarded received packets due to mm shortage
-       u32     htu_unp;                //number of unknown received cells
-       u32     rx_cnt_h;               //number of octets received, high 32 bits
-       u32     rx_cnt_l;               //number of octets received, low 32 bits
-       u32     tx_cnt_h;               //number of octets transmitted, high 32 bits
-       u32     tx_cnt_l;               //number of octets transmitted, low 32 bits
-       u32     tx_ppd;                 //number of cells for AAL5 upstream PPD discards
-       u64     rx_cells;               //number of cells for downstream
-       u64     tx_cells;               //number of cells for upstream
-       u32     rx_err_cells;           //number of cells dropped due to uncorrectable HEC errors
-}amazon_mib_counter_t;
-
-
-
-typedef enum {QS_PKT,QS_LEN,QS_ERR,QS_HW_DROP,QS_SW_DROP,QS_MAX} qs_t;
-//queue statics no. of packet received / sent
-//queue statics no. of bytes received / sent
-//queue statics no. of packets with error
-//queue statics no. of packets dropped by hw
-//queue statics no. of packets dropped by sw
-
-typedef struct{
-       push_back_t push;               //call back function
-       struct atm_vcc * vcc;           //opened vcc
-       struct timeval access_time;     //time when last F4/F5 user cells arrive
-       int     free;                   //whether this queue is occupied, 0: occupied, 1: free
-       u32     aal5VccCrcErrors;       //MIB counter
-       u32     aal5VccOverSizedSDUs;   //MIB counter
-
-#if defined(AMAZON_ATM_DEBUG) || defined (CONFIG_IFX_ATM_MIB)
-       u32     qs[QS_MAX];
-#endif 
-}amazon_atm_queue_t;
-
-
-typedef struct{
-       int     enable;         //enable / disable
-       u32     max_conn;       //maximum number of connections per port
-       u32     tx_max_cr;      //Remaining cellrate for this device for tx direction
-       u32     tx_rem_cr;      //Remaining cellrate for this device for tx direction
-       u32     tx_cur_cr;      //Current cellrate for this device for tx direction
-}amazon_atm_port_t;
-
-typedef struct{
-       amazon_aal5_dev_t       aal5;
-       amazon_cbm_dev_t        cbm;
-       amazon_htu_dev_t        htu;
-       amazon_qsb_dev_t        qsb;
-       amazon_swie_dev_t       swie;
-       amazon_mib_counter_t    mib_counter;
-       amazon_atm_queue_t      queues[AMAZON_ATM_MAX_QUEUE_NUM];
-       amazon_atm_port_t       ports[AMAZON_ATM_PORT_NUM];
-       atomic_t                dma_tx_free_0;//TX_CH0 has availabe descriptors
-} amazon_atm_dev_t;
-
-struct oam_last_activity{
-       u8                      vpi;    //vpi for this connection       
-       u16                     vci;    //vci for t his connection
-       struct timeval          stamp;  //time when last F4/F5 user cells arrive
-       struct oam_last_activity * next;//for link list purpose
-};
-
-typedef union{
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-       struct{
-               u32     tprs            :16;
-               u32     twfq            :14;
-               u32     vbr             :1;
-               u32     reserved        :1;
-       }bit;
-       u32 w0;
-#else
-       struct{
-               u32     reserved        :1;
-               u32     vbr             :1;
-               u32     twfq            :14;
-               u32     tprs            :16;
-       }bit;
-       u32 w0;
-#endif
-
-}qsb_qptl_t;
-
-typedef union{
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-       struct{
-               u32     ts              :16;
-               u32     taus            :16;
-       }bit;
-       u32 w0;
-#else
-       struct{
-               u32     taus            :16;
-               u32     ts              :16;
-       }bit;
-       u32 w0;
-#endif
-}qsb_qvpt_t;
-
-
-
-struct amazon_atm_cell_header {
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-       struct{
-               u32 clp         :1;     // Cell Loss Priority
-               u32 pti         :3;     // Payload Type Identifier
-               u32 vci         :16;    // Virtual Channel Identifier
-               u32 vpi         :8;     // Vitual Path Identifier
-               u32 gfc         :4;     // Generic Flow Control
-               }bit;
-#else
-       struct{
-               u32 gfc         :4;     // Generic Flow Control
-               u32 vpi         :8;     // Vitual Path Identifier
-               u32 vci         :16;    // Virtual Channel Identifier
-               u32 pti         :3;     // Payload Type Identifier
-               u32 clp         :1;     // Cell Loss Priority
-               }bit;
-#endif
-};
-
-
-/************************ Function Declarations **************************/
-amazon_atm_dev_t *     amazon_atm_create(void);
-int    amazon_atm_open(struct atm_vcc *vcc,push_back_t);
-int    amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb);
-int    amazon_atm_send_oam(struct atm_vcc *vcc,void *cell, int flags);
-void   amazon_atm_close(struct atm_vcc *vcc);
-void   amazon_atm_cleanup(void);
-const struct oam_last_activity* get_oam_time_stamp(void);
-
-//mib-related
-int amazon_atm_cell_mib(atm_cell_ifEntry_t * to,u32 itf);
-int amazon_atm_aal5_mib(atm_aal5_ifEntry_t * to);
-int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t * to);
-int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to);
-
-#define        AMAZON_WRITE_REGISTER_L(data,addr)      do{ *((volatile u32*)(addr)) = (u32)(data); wmb();} while (0)
-#define AMAZON_READ_REGISTER_L(addr)   (*((volatile u32*)(addr)))
-/******************************* ioctl stuff****************************************/
-#define NUM(dev)    (MINOR(dev) & 0xf)
-/*
- * Ioctl definitions
- */
-/* Use 'o' as magic number */
-#define AMAZON_ATM_IOC_MAGIC  'o'
-/* MIB_CELL: get atm cell level mib counter
- * MIB_AAL5: get aal5 mib counter
- * MIB_VCC: get vcc mib counter
- */
-typedef struct{
-       int vpi;
-       int vci;
-       atm_aal5_vcc_t mib_vcc;
-}atm_aal5_vcc_x_t;
-#define AMAZON_ATM_MIB_CELL            _IOWR(AMAZON_ATM_IOC_MAGIC,  0, atm_cell_ifEntry_t)
-#define AMAZON_ATM_MIB_AAL5            _IOWR(AMAZON_ATM_IOC_MAGIC,  1, atm_aal5_ifEntry_t)
-#define AMAZON_ATM_MIB_VCC             _IOWR(AMAZON_ATM_IOC_MAGIC,  2, atm_aal5_vcc_x_t)
-#define AMAZON_ATM_IOC_MAXNR   3
-
-//sockopt
-#define        SO_AMAZON_ATM_MIB_VCC           __SO_ENCODE(SOL_ATM,5,atm_aal5_vcc_t)
-
-#endif // AMAZON_TPE_H
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h
deleted file mode 100644 (file)
index 775dabc..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef AMAZON_WDT_H
-#define AMAZON_WDT_H
-#ifdef __KERNEL__
-typedef struct wdt_dev{
-      char name[16];
-      int major;
-      int minor;
-      
-      int full;
-      char buff[10];
-}wdt_dev;
-#define AMAZON_WDT_REG32(addr) (*((volatile u32*)(addr))) 
-#endif //__KERNEL__
-
-//AMAZON_WDT_IOC_START: start the WDT timer (must provide a initial timeout value)
-//AMAZON_WDT_IOC_STOP: stop the WDT
-//AMAZON_WDT_IOC_PING: reload the timer to initial value (must happend after a AMAZON_WDT_IOC_START)
-#define AMAZON_WDT_IOC_MAGIC   0xc0
-#define AMAZON_WDT_IOC_START   _IOW( AMAZON_WDT_IOC_MAGIC,0, int)
-#define AMAZON_WDT_IOC_STOP    _IO( AMAZON_WDT_IOC_MAGIC,1)
-#define AMAZON_WDT_IOC_PING    _IO( AMAZON_WDT_IOC_MAGIC,2)
-
-#endif //AMAZON_WDT_H
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h
deleted file mode 100644 (file)
index 8adda20..0000000
+++ /dev/null
@@ -1,540 +0,0 @@
-#ifndef ATM_DEFINES_H
-#define        ATM_DEFINES_H
-                       
-//Registers Base Address
-#define IO_BASE_ADDR                           0xA0000000
-#define        AAL5_BASE_ADDRESS                       0x10104400+IO_BASE_ADDR
-#define        CBM_BASE_ADDRESS                        0x10104000+IO_BASE_ADDR
-#define        HTU_BASE_ADDRESS                        0x10105100+IO_BASE_ADDR
-#define        QSB_BASE_ADDRESS                        0x10105000+IO_BASE_ADDR
-#define        SWIE_BASE_ADDRESS                       0x10105200+IO_BASE_ADDR
-
-//AAL5 Registers
-#define        AAL5_SISR0_ADDR                         AAL5_BASE_ADDRESS+0x20
-#define        AAL5_SIMR0_ADDR                         AAL5_BASE_ADDRESS+0x24
-#define        AAL5_SISR1_ADDR                         AAL5_BASE_ADDRESS+0x28
-#define        AAL5_SIMR1_ADDR                         AAL5_BASE_ADDRESS+0x2C
-#define        AAL5_SMFL_ADDR                          AAL5_BASE_ADDRESS+0x30
-#define        AAL5_SATMHD_ADDR                        AAL5_BASE_ADDRESS+0x34
-#define        AAL5_SCON_ADDR                          AAL5_BASE_ADDRESS+0x38
-#define        AAL5_SCMD_ADDR                          AAL5_BASE_ADDRESS+0x3C
-#define        AAL5_RISR0_ADDR                         AAL5_BASE_ADDRESS+0x40
-#define        AAL5_RIMR0_ADDR                         AAL5_BASE_ADDRESS+0x44
-#define        AAL5_RISR1_ADDR                         AAL5_BASE_ADDRESS+0x48
-#define        AAL5_RIMR1_ADDR                         AAL5_BASE_ADDRESS+0x4C
-#define        AAL5_RMFL_ADDR                          AAL5_BASE_ADDRESS+0x50
-#define        AAL5_RINTINF0_ADDR                      AAL5_BASE_ADDRESS+0x54
-#define        AAL5_RINTINF1_ADDR                      AAL5_BASE_ADDRESS+0x58
-#define        AAL5_RES5C_ADDR                         AAL5_BASE_ADDRESS+0x5C
-#define AAL5_RIOL_ADDR                         AAL5_BASE_ADDRESS+0x60
-#define        AAL5_RIOM_ADDR                          AAL5_BASE_ADDRESS+0x64
-#define        AAL5_SOOL_ADDR                          AAL5_BASE_ADDRESS+0x68
-#define        AAL5_SOOM_ADDR                          AAL5_BASE_ADDRESS+0x6C
-#define        AAL5_RES70_ADDR                         AAL5_BASE_ADDRESS+0x70
-#define        AAL5_RES74_ADDR                         AAL5_BASE_ADDRESS+0x74
-#define        AAL5_RES78_ADDR                         AAL5_BASE_ADDRESS+0x78
-#define        AAL5_RES7C_ADDR                         AAL5_BASE_ADDRESS+0x7C
-#define        AAL5_RES80_ADDR                         AAL5_BASE_ADDRESS+0x80
-#define        AAL5_RES84_ADDR                         AAL5_BASE_ADDRESS+0x84
-#define        AAL5_RES88_ADDR                         AAL5_BASE_ADDRESS+0x88
-#define        AAL5_RES8C_ADDR                         AAL5_BASE_ADDRESS+0x8C
-#define        AAL5_RES90_ADDR                         AAL5_BASE_ADDRESS+0x90
-#define        AAL5_RES94_ADDR                         AAL5_BASE_ADDRESS+0x94
-#define        AAL5_RES98_ADDR                         AAL5_BASE_ADDRESS+0x98
-#define        AAL5_RES9C_ADDR                         AAL5_BASE_ADDRESS+0x9C
-#define        AAL5_RESA0_ADDR                         AAL5_BASE_ADDRESS+0xA0
-#define        AAL5_RESA4_ADDR                         AAL5_BASE_ADDRESS+0xA4
-#define        AAL5_RESA8_ADDR                         AAL5_BASE_ADDRESS+0xA8
-#define        AAL5_RESAC_ADDR                         AAL5_BASE_ADDRESS+0xAC
-#define        AAL5_RESB0_ADDR                         AAL5_BASE_ADDRESS+0xB0
-#define        AAL5_RESB4_ADDR                         AAL5_BASE_ADDRESS+0xB4
-#define        AAL5_RESB8_ADDR                         AAL5_BASE_ADDRESS+0xB8
-#define        AAL5_RESBC_ADDR                         AAL5_BASE_ADDRESS+0xBC
-#define        AAL5_RESC0_ADDR                         AAL5_BASE_ADDRESS+0xC0
-#define        AAL5_RESC4_ADDR                         AAL5_BASE_ADDRESS+0xC4
-#define        AAL5_RESC8_ADDR                         AAL5_BASE_ADDRESS+0xC8
-#define        AAL5_RESCC_ADDR                         AAL5_BASE_ADDRESS+0xCC
-#define        AAL5_RESD0_ADDR                         AAL5_BASE_ADDRESS+0xD0
-#define        AAL5_RESD4_ADDR                         AAL5_BASE_ADDRESS+0xD4
-#define        AAL5_RESD8_ADDR                         AAL5_BASE_ADDRESS+0xD8
-#define        AAL5_RESDC_ADDR                         AAL5_BASE_ADDRESS+0xDC
-#define        AAL5_RESE0_ADDR                         AAL5_BASE_ADDRESS+0xE0
-#define        AAL5_RESE4_ADDR                         AAL5_BASE_ADDRESS+0xE4
-#define        AAL5_RESE8_ADDR                         AAL5_BASE_ADDRESS+0xE8
-#define        AAL5_RESEC_ADDR                         AAL5_BASE_ADDRESS+0xEC
-#define        AAL5_SSRC0_ADDR                         AAL5_BASE_ADDRESS+0xF0
-#define        AAL5_SSRC1_ADDR                         AAL5_BASE_ADDRESS+0xF4
-#define        AAL5_RSRC0_ADDR                         AAL5_BASE_ADDRESS+0xF8
-#define        AAL5_RSRC1_ADDR                         AAL5_BASE_ADDRESS+0xFC
-
-#define        AAL5S_ISR_QID_MASK                      0xFF000000
-#define        AAL5S_ISR_SAB                           0x00000100
-#define        AAL5S_ISR_SE                            0x00000080
-#define        AAL5S_ISR_MFLE                          0x00000040
-#define        AAL5S_ISR_SBE0                          0x00000020
-#define        AAL5S_ISR_SEG0                          0x00000010
-#define        AAL5S_ISR_TAB                           0x00000004
-
-#define        AAL5_SIMR_MASK                          0x000001c7
-#define        AAL5_SIMR_SAB                           0x00000100
-#define        AAL5_SIMR_SE                            0x00000080
-#define        AAL5_SIMR_MFLE                          0x00000040
-#define        AAL5_SIMR_TAB                           0x00000004
-#define        AAL5_SIMR_SBE0                          0x00000002
-#define        AAL5_SIMR_SEG0                          0x00000001
-
-#define        AAL5_SCMD_SEQCOUNT_MASK                 0x0000ff00
-#define        AAL5_SCMD_MODE_POLL                     0x00000008
-#define        AAL5_SCMD_MODE_COUNT                    0x00000000
-#define        AAL5_SCMD_AS                            0x00000004
-#define        AAL5_SCMD_SS                            0x00000002
-#define        AAL5_SCMD_AR                            0x00000001
-
-#define        AAL5R_ISR_CID_MASK                      0xFF000000//ConnectionID
-#define        AAL5R_ISR_DBC_MASK                      0x00FF0000//DiscardedByteCounter
-#define        AAL5R_ISR_END                           0x00002000//End
-#define        AAL5R_ISR_ICID                          0x00001000//InvalidConnectionID
-#define        AAL5R_ISR_CLP                           0x00000800//CellLossPriority
-#define        AAL5R_ISR_CGST                          0x00000400//Congestion
-#define        AAL5R_ISR_UUE                           0x00000200//CPCSUUError
-#define        AAL5R_ISR_CPIE                          0x00000100//CPIError
-#define        AAL5R_ISR_FE                            0x00000080//FrameEnd
-#define        AAL5R_ISR_MFLE                          0x00000040//MaximumFrameLengthExceeded
-#define        AAL5R_ISR_DBCE                          0x00000020//DiscardedByteCounterExceeded
-#define        AAL5R_ISR_CRC                           0x00000010//CRCError
-#define        AAL5R_ISR_ILEN                          0x00000008//InvalidLength
-#define        AAL5R_ISR_RAB                           0x00000004//ReceiveAbort
-
-#define        AAL5_RIMR1_MASK                         0x00003ffc
-#define        AAL5_RIMR1_END                          0x00002000//End
-#define        AAL5_RIMR1_ICID                         0x00001000//InvalidConnectionID
-#define        AAL5_RIMR1_CLP                          0x00000800//CellLossPriority
-#define        AAL5_RIMR1_CGST                         0x00000400//Congestion
-#define        AAL5_RIMR1_UUE                          0x00000200//CPCSUUError
-#define        AAL5_RIMR1_CPIE                         0x00000100//CPIError
-#define        AAL5_RIMR1_FE                           0x00000080//FrameEnd
-#define        AAL5_RIMR1_MFLE                         0x00000040//MaximumFrameLengthExceeded
-#define        AAL5_RIMR1_DBCE                         0x00000020//DiscardedByteCounterExceeded
-#define        AAL5_RIMR1_CRC                          0x00000010//CRCError
-#define        AAL5_RIMR1_ILEN                         0x00000008//InvalidLength
-#define        AAL5_RIMR1_RAB                          0x00000004//ReceiveAbort
-
-//AAL5 Reassambly Errors
-#define AAL5_STW1_MASK                         0x33//Error mask
-#define AAL5_STW0_MASK                         0x5c//Error mask
-#define AAL5_STW0_BE                           0x3//padding bytes mask
-#define        AAL5_STW1_CBM                           0x20//Transfer from CBM to A5R abnormally ended
-#define        AAL5_STW1_CH                            0x10//Invalid Channel number error
-#define        AAL5_STW1_CLP                           0x8//CLP value of cells in packet is 1
-#define        AAL5_STW1_CG                            0x4//Cell in packet expired congestion
-#define        AAL5_STW1_UU                            0x2//CPCS-UU value error
-#define        AAL5_STW1_CPI                           0x1//CPI value error
-#define        AAL5_STW0_FE                            0x80//Frame end
-#define        AAL5_STW0_MFL                           0x40//Maximum frame length error
-#define        AAL5_STW0_CRC                           0x10//CRC error
-#define        AAL5_STW0_IL                            0x8//Invalid length
-#define        AAL5_STW0_RA                            0x4//Received abort
-
-
-
-//CBM Registers
-#define        CBM_NRTTHR_ADDR                 CBM_BASE_ADDRESS+0x10//NonRealTimeThreshold
-#define        CBM_CLP0THR_ADDR                CBM_BASE_ADDRESS+0x14//CLP0Threshold
-#define        CBM_CLP1THR_ADDR                CBM_BASE_ADDRESS+0x18//CLP1Threshold
-#define        CBM_QDOFF_ADDR                  CBM_BASE_ADDRESS+0x1C//QueueDescriptorOffset
-#define        CBM_CFG_ADDR                    CBM_BASE_ADDRESS+0x20//Configuration
-#define        CBM_HWEXPAR0_ADDR               CBM_BASE_ADDRESS+0x24//HWExtractParameter0
-#define        CBM_RES28_ADDR                  CBM_BASE_ADDRESS+0x28
-#define        CBM_WMSTAT0_ADDR                CBM_BASE_ADDRESS+0x2C
-#define        CBM_HWEXCMD_ADDR                CBM_BASE_ADDRESS+0x30//HWExtractCommand0
-#define        CBM_RES34_ADDR                  CBM_BASE_ADDRESS+0x34
-#define        CBM_HWEXSTAT0_ADDR              CBM_BASE_ADDRESS+0x38//HWExtractStatus0
-#define        CBM_RES3C_ADDR                  CBM_BASE_ADDRESS+0x3C
-#define        CBM_RES40_ADDR                  CBM_BASE_ADDRESS+0x40
-#define        CBM_CNT_ADDR                    CBM_BASE_ADDRESS+0x44//CellCount
-#define        CBM_RES48_ADDR                  CBM_BASE_ADDRESS+0x48
-#define        CBM_LFR_ADDR                    CBM_BASE_ADDRESS+0x4C//PointertolastCellinfreeCellQueue
-#define        CBM_FFR_ADDR                    CBM_BASE_ADDRESS+0x50//PointertofirstCellinfreeCellQueue
-#define        CBM_RES54_ADDR                  CBM_BASE_ADDRESS+0x54
-#define        CBM_RES58_ADDR                  CBM_BASE_ADDRESS+0x58
-#define        CBM_RES5C_ADDR                  CBM_BASE_ADDRESS+0x5C
-#define        CBM_RES60_ADDR                  CBM_BASE_ADDRESS+0x60
-#define        CBM_RES64_ADDR                  CBM_BASE_ADDRESS+0x64
-#define        CBM_RES68_ADDR                  CBM_BASE_ADDRESS+0x68
-#define        CBM_RES6C_ADDR                  CBM_BASE_ADDRESS+0x6C
-#define        CBM_RES70_ADDR                  CBM_BASE_ADDRESS+0x70
-#define        CBM_RES74_ADDR                  CBM_BASE_ADDRESS+0x74
-#define        CBM_RES78_ADDR                  CBM_BASE_ADDRESS+0x78
-#define        CBM_RES7C_ADDR                  CBM_BASE_ADDRESS+0x7C
-#define        CBM_RES80_ADDR                  CBM_BASE_ADDRESS+0x80
-#define        CBM_RES84_ADDR                  CBM_BASE_ADDRESS+0x84
-#define        CBM_RES88_ADDR                  CBM_BASE_ADDRESS+0x88
-#define        CBM_RES8C_ADDR                  CBM_BASE_ADDRESS+0x8C
-#define        CBM_RES90_ADDR                  CBM_BASE_ADDRESS+0x90
-#define        CBM_RES94_ADDR                  CBM_BASE_ADDRESS+0x94
-#define        CBM_RES98_ADDR                  CBM_BASE_ADDRESS+0x98
-#define        CBM_RES9C_ADDR                  CBM_BASE_ADDRESS+0x9C
-#define        CBM_RESA0_ADDR                  CBM_BASE_ADDRESS+0xA0
-#define        CBM_RESA4_ADDR                  CBM_BASE_ADDRESS+0xA4
-#define        CBM_RESA8_ADDR                  CBM_BASE_ADDRESS+0xA8
-#define        CBM_RESAC_ADDR                  CBM_BASE_ADDRESS+0xAC
-#define        CBM_RESB0_ADDR                  CBM_BASE_ADDRESS+0xB0
-#define        CBM_RESB4_ADDR                  CBM_BASE_ADDRESS+0xB4
-#define        CBM_RESB8_ADDR                  CBM_BASE_ADDRESS+0xB8
-#define        CBM_RESBC_ADDR                  CBM_BASE_ADDRESS+0xBC
-#define        CBM_INTINF0_ADDR                CBM_BASE_ADDRESS+0xC0//InterruptInfo0
-#define        CBM_INTCMD_ADDR                 CBM_BASE_ADDRESS+0xC4//InterruptCommand0
-#define        CBM_IMR0_ADDR                   CBM_BASE_ADDRESS+0xC8//InterruptMask
-#define        CBM_SRC0_ADDR                   CBM_BASE_ADDRESS+0xCC//ServiceRequestControl
-#define        CBM_RESD0_ADDR                  CBM_BASE_ADDRESS+0xD0
-#define        CBM_RESD4_ADDR                  CBM_BASE_ADDRESS+0xD4
-#define        CBM_RESD8_ADDR                  CBM_BASE_ADDRESS+0xD8
-#define        CBM_RESDC_ADDR                  CBM_BASE_ADDRESS+0xDC
-#define        CBM_RESE0_ADDR                  CBM_BASE_ADDRESS+0xE0
-#define        CBM_AAL5IDIS_ADDR               CBM_BASE_ADDRESS+0xE4//MIB-No.EPDdiscardedpacketsupstream
-#define        CBM_AAL5ODIS_ADDR               CBM_BASE_ADDRESS+0xE8//MIB-No.PPDdiscardedpacketsupstream
-#define        CBM_RESEC_ADDR                  CBM_BASE_ADDRESS+0xEC
-#define        CBM_RESF0_ADDR                  CBM_BASE_ADDRESS+0xF0
-#define        CBM_RESF4_ADDR                  CBM_BASE_ADDRESS+0xF4
-#define        CBM_RESF8_ADDR                  CBM_BASE_ADDRESS+0xF8
-#define        CBM_RESFC_ADDR                  CBM_BASE_ADDRESS+0xFC
-
-//CBMCFG
-#define        CBM_CFG_INTLCK0EN               0x00000008
-#define        CBM_CFG_INT0HLT                 0x00000004
-#define        CBM_CFG_START                   0x00000001
-
-#define        CBM_HWEXPAR_PN_A5               0x00002000
-#define        CBM_HWEXPAR_PN_CM               0x00000000
-#define        CBM_HWEXPAR_SUBADD_PORTMASK     0x00000070
-#define        CBM_HWEXPAR_SUBADD_ADU          0x00000000
-#define        CBM_HWEXPAR_SUBADD_AAL2         0x00000080
-#define        CBM_HWEXPAR_SUBADD_SWIE         0x00000100
-
-#define        CBM_HWEXCMD_SFE2                0x00000100
-#define        CBM_HWEXCMD_FE2                 0x00000080
-#define        CBM_HWEXCMD_SCE2                0x00000040
-#define        CBM_HWEXCMD_SFE1                0x00000020
-#define        CBM_HWEXCMD_FE1                 0x00000010
-#define        CBM_HWEXCMD_SCE1                0x00000008
-#define        CBM_HWEXCMD_SFE0                0x00000004
-#define        CBM_HWEXCMD_FE0                 0x00000002
-#define        CBM_HWEXCMD_SCE0                0x00000001
-
-#define        CBM_INTINF0_QID_MASK            0xFF000000
-#define        CBM_INTINF0_ORIGIN_MASK         0x00F00000
-#define        CBM_INTINF0_EF                  0x00004000
-#define        CBM_INTINF0_ACA                 0x00002000
-#define        CBM_INTINF0_ERR                 0x00001000
-#define        CBM_INTINF0_DISC                0x00000800
-#define        CBM_INTINF0_QSBV                0x00000400
-#define        CBM_INTINF0_Q0E                 0x00000200
-#define        CBM_INTINF0_Q0I                 0x00000100
-#define        CBM_INTINF0_RDE                 0x00000080
-#define        CBM_INTINF0_OPF                 0x00000040
-#define        CBM_INTINF0_NFCA                0x00000020
-#define        CBM_INTINF0_CLP1TR              0x00000010
-#define        CBM_INTINF0_CLP0TR              0x00000008
-#define        CBM_INTINF0_NRTTR               0x00000004
-#define        CBM_INTINF0_QFD                 0x00000002
-#define        CBM_INTINF0_QTR                 0x00000001
-#define CBM_INTINF0_QID_SHIFT          24
-//CBM QD Word 3
-#define        CBM_QD_W3_QOS_0                 0x00000000
-#define        CBM_QD_W3_QOS_1                 0x40000000
-#define        CBM_QD_W3_QOS_2                 0x80000000
-#define        CBM_QD_W3_QOS_3                 0xc0000000
-
-#define        CBM_QD_W3_DIR_UP                0x20000000
-#define        CBM_QD_W3_DIR_DOWN              0x00000000
-
-#define        CBM_QD_W3_CLPt                  0x10000000
-#define        CBM_QD_W3_RT                    0x08000000
-#define        CBM_QD_W3_AAL5                  0x04000000
-
-#define        CBM_QD_W3_INT_NOINT             0x00000000
-#define        CBM_QD_W3_INT_ACA               0x01000000
-#define        CBM_QD_W3_INT_EOF               0x02000000
-#define        CBM_QD_W3_INT_BOTH              0x03000000
-
-#define        CBM_QD_W3_THRESHOLD_MASK        0x00ff0000
-#define CBM_QD_W3_WM_EN                        0x00000010
-#define        CBM_QD_W3_HCR                   0x00000008
-#define        CBM_QD_W3_SBID_MASK             0x00000001
-
-#define        CBM_QD_W3_THRESHOLD_SHIFT       16
-
-//WATER MARK STATUS
-#define        CBM_WM_NRT_MASK                 0x00040000
-#define        CBM_WM_CLP0_MASK                0x00020000
-#define        CBM_WM_CLP1_MASK                0x00010000
-
-//CBMNRTTHR, CBMCLP0THR, CBMCLP0THR
-#define CBM_NRT_WM_NONE                        0x00000000//no water mark
-#define CBM_WM_3_1                     0x00010000//3/4 to set, 1/4 to release
-#define CBM_WM_3_2                     0x00020000//3/4 to set, 2/4 to release
-#define CBM_WM_2_1                     0x00030000//2/4 to set, 1/4 to release
-#define CBM_THR_MASK                   0x0000FFFF
-
-#define        CBM_IMR_MASK                    0x0000fbff
-#define        CBM_IMR_reserved                0xFFFF0400
-#define        CBM_IMR_RFULL                   0x00008000//EndofFrame
-#define        CBM_IMR_EF                      0x00004000//EndofFrame
-#define        CBM_IMR_ACA                     0x00002000//AnyCellArrived
-#define        CBM_IMR_ERR                     0x00001000//FPI Error
-#define        CBM_IMR_DISC                    0x00000800//Discard
-#define        CBM_IMR_reserved1               0x00000400//reserved
-#define        CBM_IMR_Q0E                     0x00000200//Queue0Extract
-#define        CBM_IMR_Q0I                     0x00000100//Queue0Insert
-#define        CBM_IMR_RDE                     0x00000080//ReadEmptyQueue
-#define        CBM_IMR_OPF                     0x00000040//OncePerFrame
-#define        CBM_IMR_NFCA                    0x00000020//NoFreeCellAvailable
-#define        CBM_IMR_CLP1TR                  0x00000010//CLP1ThresholdReached
-#define        CBM_IMR_CLP0TR                  0x00000008//CLP0ThresholdReached
-#define        CBM_IMR_NRTTR                   0x00000004//NonRealTimeThresholdReached
-#define        CBM_IMR_QFD                     0x00000002//QueueFrameDiscard
-#define        CBM_IMR_QTR                     0x00000001//QueueThresholdReached
-
-#define        CBM_EXSTAT_FB                   0x00000010
-#define        CBM_EXSTAT_SCB                  0x00000008
-#define        CBM_EXSTAT_Q0                   0x00000004
-#define        CBM_EXSTAT_RDE                  0x00000002
-#define        CBM_EXSTAT_QV                   0x00000001
-
-//HTU Registers
-#define        HTU_RX0_ADDR                    HTU_BASE_ADDRESS+0x10
-#define        HTU_RX1_ADDR                    HTU_BASE_ADDRESS+0x14
-#define        HTU_RES18_ADDR                  HTU_BASE_ADDRESS+0x18
-#define        HTU_RES1C_ADDR                  HTU_BASE_ADDRESS+0x1C
-#define        HTU_RES20_ADDR                  HTU_BASE_ADDRESS+0x20
-#define        HTU_RES24_ADDR                  HTU_BASE_ADDRESS+0x24
-#define        HTU_RES28_ADDR                  HTU_BASE_ADDRESS+0x28
-#define        HTU_RES2C_ADDR                  HTU_BASE_ADDRESS+0x2C
-#define        HTU_PCF0PAT_ADDR                HTU_BASE_ADDRESS+0x30
-#define        HTU_PCF1PAT_ADDR                HTU_BASE_ADDRESS+0x34
-#define        HTU_RES38_ADDR                  HTU_BASE_ADDRESS+0x38
-#define        HTU_RES3C_ADDR                  HTU_BASE_ADDRESS+0x3C
-#define        HTU_RES40_ADDR                  HTU_BASE_ADDRESS+0x40
-#define        HTU_RES44_ADDR                  HTU_BASE_ADDRESS+0x44
-#define        HTU_RES48_ADDR                  HTU_BASE_ADDRESS+0x48
-#define        HTU_RES4C_ADDR                  HTU_BASE_ADDRESS+0x4C
-#define        HTU_PCF0MASK_ADDR               HTU_BASE_ADDRESS+0x50
-#define        HTU_PCF1MASK_ADDR               HTU_BASE_ADDRESS+0x54
-#define        HTU_RES58_ADDR                  HTU_BASE_ADDRESS+0x58
-#define        HTU_RES5C_ADDR                  HTU_BASE_ADDRESS+0x5C
-#define        HTU_RES60_ADDR                  HTU_BASE_ADDRESS+0x60
-#define        HTU_RES64_ADDR                  HTU_BASE_ADDRESS+0x64
-#define        HTU_RES68_ADDR                  HTU_BASE_ADDRESS+0x68
-#define        HTU_RES6C_ADDR                  HTU_BASE_ADDRESS+0x6C
-#define        HTU_TIMEOUT_ADDR                HTU_BASE_ADDRESS+0x70
-#define        HTU_DESTOAM_ADDR                HTU_BASE_ADDRESS+0x74
-#define        HTU_DESTRM_ADDR                 HTU_BASE_ADDRESS+0x78
-#define        HTU_DESTOTHER_ADDR              HTU_BASE_ADDRESS+0x7C
-#define        HTU_CFG_ADDR                    HTU_BASE_ADDRESS+0x80
-#define        HTU_RES84_ADDR                  HTU_BASE_ADDRESS+0x84
-#define        HTU_RES88_ADDR                  HTU_BASE_ADDRESS+0x88
-#define        HTU_RES8C_ADDR                  HTU_BASE_ADDRESS+0x8C
-#define        HTU_INFNOENTRY_ADDR             HTU_BASE_ADDRESS+0x90
-#define        HTU_INFTIMEOUT_ADDR             HTU_BASE_ADDRESS+0x94
-#define        HTU_RES98_STAT                  HTU_BASE_ADDRESS+0x98
-#define        HTU_RES9C_ADDR                  HTU_BASE_ADDRESS+0x9C
-#define        HTU_MIBCIUP                     HTU_BASE_ADDRESS+0xA0//MIB Counter In Unknown Protoc Register
-#define        HTU_CNTTIMEOUT_ADDR             HTU_BASE_ADDRESS+0xA4
-#define        HTU_RESA8_ADDR                  HTU_BASE_ADDRESS+0xA8
-#define        HTU_RESAC_ADDR                  HTU_BASE_ADDRESS+0xAC
-#define        HTU_RAMADDR_ADDR                HTU_BASE_ADDRESS+0xB0
-#define        HTU_RAMCMD_ADDR                 HTU_BASE_ADDRESS+0xB4
-#define        HTU_RAMSTAT_ADDR                HTU_BASE_ADDRESS+0xB8
-#define        HTU_RESBC_ADDR                  HTU_BASE_ADDRESS+0xBC
-#define        HTU_RAMDAT1_ADDR                HTU_BASE_ADDRESS+0xC0
-#define        HTU_RAMDAT2_ADDR                HTU_BASE_ADDRESS+0xC4
-#define        HTU_RESCC_ADDR                  HTU_BASE_ADDRESS+0xCC
-#define        HTU_RESD0_ADDR                  HTU_BASE_ADDRESS+0xD0
-#define        HTU_RESD4_ADDR                  HTU_BASE_ADDRESS+0xD4
-#define        HTU_RESD8_ADDR                  HTU_BASE_ADDRESS+0xD8
-#define        HTU_RESDC_ADDR                  HTU_BASE_ADDRESS+0xDC
-#define        HTU_RESE0_ADDR                  HTU_BASE_ADDRESS+0xE0
-#define        HTU_RESE4_ADDR                  HTU_BASE_ADDRESS+0xE4
-#define        HTU_IMR0_ADDR                   HTU_BASE_ADDRESS+0xE8
-#define        HTU_RESEC_ADDR                  HTU_BASE_ADDRESS+0xEC
-#define        HTU_ISR0_ADDR                   HTU_BASE_ADDRESS+0xF0
-#define        HTU_RESF4_ADDR                  HTU_BASE_ADDRESS+0xF4
-#define        HTU_SRC0_ADDR                   HTU_BASE_ADDRESS+0xF8
-#define        HTU_RESFC_ADDR                  HTU_BASE_ADDRESS+0xFC
-
-//HTU_CFG
-#define        HTU_CFG_START                   0x00000001
-
-#define        HTU_RAMCMD_RMW                  0x00000004
-#define        HTU_RAMCMD_RD                   0x00000002
-#define        HTU_RAMCMD_WR                   0x00000001
-
-#define        HTU_RAMDAT1_VCON                0x00000080//validconnection
-#define        HTU_RAMDAT1_VCT                 0x00000040//vcivalueistransparent
-#define        HTU_RAMDAT1_QIDS                0x00000020//qid selects a cell in cbm
-#define        HTU_RAMDAT1_VCI3                0x00000010//vci3->oamqueue
-#define        HTU_RAMDAT1_VCI4                0x00000008//vci4->oamqueue
-#define        HTU_RAMDAT1_VCI6                0x00000004//vci6->rmqueue
-#define        HTU_RAMDAT1_PTI4                0x00000002//pti4->oamqueue
-#define        HTU_RAMDAT1_PTI5                0x00000001//pti5->oamqueue
-
-#define        HTU_RAMDAT2_PTI6                0x00000800
-#define        HTU_RAMDAT2_PTI7                0x00000400
-#define        HTU_RAMDAT2_F4U                 0x00000200
-#define        HTU_RAMDAT2_F5U                 0x00000100
-#define HTU_RAMDAT2_QID_MASK           0x000000ff
-
-#define        HTU_ISR_NE                      0x00000001
-#define        HTU_ISR_TORD                    0x00000002
-#define        HTU_ISR_IT                      0x00000008
-#define        HTU_ISR_OTOC                    0x00000010
-#define        HTU_ISR_ONEC                    0x00000020
-#define        HTU_ISR_PNE                     0x00000040
-#define        HTU_ISR_PT                      0x00000080
-#define        HTU_ISR_MASK                    0x000000ff
-
-
-//QSB Registers
-#define        QSB_BIP0_ADDR                   QSB_BASE_ADDRESS+0x00
-#define        QSB_BIP1_ADDR                   QSB_BASE_ADDRESS+0x04
-#define        QSB_BIP2_ADDR                   QSB_BASE_ADDRESS+0x08
-#define        QSB_BIP3_ADDR                   QSB_BASE_ADDRESS+0x0C
-#define        QSB_RSVP_ADDR                   QSB_BASE_ADDRESS+0x10
-#define        QSB_TNOW_ADDR                   QSB_BASE_ADDRESS+0x14
-#define        QSB_TNOWCYC_ADDR                QSB_BASE_ADDRESS+0x18
-#define        QSB_TAU_ADDR                    QSB_BASE_ADDRESS+0x1C
-#define        QSB_L1BRS_ADDR                  QSB_BASE_ADDRESS+0x20
-#define        QSB_SBL_ADDR                    QSB_BASE_ADDRESS+0x24
-#define        QSB_CONFIG_ADDR                 QSB_BASE_ADDRESS+0x28
-#define        QSB_RTM_ADDR                    QSB_BASE_ADDRESS+0x2C
-#define        QSB_RTD_ADDR                    QSB_BASE_ADDRESS+0x30
-#define        QSB_RAMAC_ADDR                  QSB_BASE_ADDRESS+0x34
-#define        QSB_ISR_ADDR                    QSB_BASE_ADDRESS+0x38
-#define        QSB_IMR_ADDR                    QSB_BASE_ADDRESS+0x3C
-#define        QSB_SRC_ADDR                    QSB_BASE_ADDRESS+0x40
-
-#define        QSB_TABLESEL_QVPT               8
-#define        QSB_TABLESEL_QPT                1
-#define        QSB_TABLESEL_SCT                2
-#define        QSB_TABLESEL_SPT                3
-#define        QSB_TABLESEL_CALENDARWFQ        4/*notusedbyFW*/
-#define        QSB_TABLESEL_L2WFQ              5/*notusedbyFW*/
-#define        QSB_TABLESEL_CALENDARRS         6/*notusedbyFW*/
-#define        QSB_TABLESEL_L2BITMAPRS         7/*notusedbyFW*/
-#define        QSB_TABLESEL_SHIFT              24
-#define        QSB_TWFQ_MASK                   0x3FFF0000
-#define        QSB_TPRS_MASK                   0x0000FFFF
-#define        QSB_SBID_MASK                   0xF
-#define        QSB_TWFQ_SHIFT                  16
-#define        QSB_SCDRATE_MASK                0x00007FFF
-#define        QSB_SBVALID_MASK                0x80000000
-
-#define        QSB_ISR_WFQLE                   0x00000001
-#define        QSB_ISR_WFQBE                   0x00000002
-#define        QSB_ISR_RSLE                    0x00000004
-#define        QSB_ISR_RSBE                    0x00000008
-#define        QSB_ISR_MUXOV                   0x00000010
-#define        QSB_ISR_CDVOV                   0x00000020
-#define        QSB_ISR_PARAMI                  0x00000040
-#define        QSB_ISR_SLOSS                   0x00000080
-#define        QSB_ISR_IIPS                    0x00000100
-
-#define        QSB_IMR_WFQLE                   0x00000001
-#define        QSB_IMR_WFQBE                   0x00000002
-#define        QSB_IMR_RSLE                    0x00000004
-#define        QSB_IMR_RSBE                    0x00000008
-#define        QSB_IMR_MUXOV                   0x00000010
-#define        QSB_IMR_CDVOV                   0x00000020
-#define        QSB_IMR_PARAMI                  0x00000040
-#define        QSB_IMR_SLOSS                   0x00000080
-#define        QSB_IMR_IIPS                    0x00000100
-
-#define        QSB_READ                        0x0
-#define        QSB_WRITE                       0x80000000
-#define        QSB_READ_ALL                    0xFFFFFFFF
-
-#if 1 //some bug with QSB access mask
-#define        QSB_QPT_SET_MASK                0x0
-#define QSB_QVPT_SET_MASK              0x0
-#define        QSB_SET_SCT_MASK                0x0
-#define        QSB_SET_SPT_MASK                0x0
-#define        QSB_SET_SPT_SBVALID_MASK        0x7FFFFFFF
-#else //some bug with QSB access mask
-#define        QSB_QPT_SET_MASK                0x80000000
-#define QSB_QVPT_SET_MASK              0x0
-#define        QSB_SET_SCT_MASK                0xFFFFFFE0
-#define        QSB_SET_SPT_MASK                0x7FF8C000
-#define        QSB_SET_SPT_SBVALID_MASK        0x7FFFFFFF
-#endif //some bug with QSB access mask
-
-#define        QSB_SPT_SBVALID                 0x80000000
-
-#define        QSB_RAMAC_REG_LOW               0x0
-#define        QSB_RAMAC_REG_HIGH              0x00010000
-
-#define        SRC_SRE_ENABLE                  0x1000
-#define SRC_CLRR                       0x4000  //request clear bit
-
-
-
-//SWIE Registers
-#define        SWIE_IQID_ADDR                  SWIE_BASE_ADDRESS+0x0c//SWIEInsertQueueDescriptor
-#define        SWIE_ICMD_ADDR                  SWIE_BASE_ADDRESS+0x10//SWIEInsertCommand
-#define        SWIE_ISTAT_ADDR                 SWIE_BASE_ADDRESS+0x14//SWIEInsertStatus
-#define        SWIE_ESTAT_ADDR                 SWIE_BASE_ADDRESS+0x18//SWIEExtractStatus
-#define        SWIE_ISRC_ADDR                  SWIE_BASE_ADDRESS+0x74//SWIEInsertServiceRequestControl
-#define        SWIE_ESRC_ADDR                  SWIE_BASE_ADDRESS+0x78//SWIEExtractServiceRequestControl
-#define        SWIE_ICELL_ADDR                 SWIE_BASE_ADDRESS+0x80//SWIEInsertCell(0x80-0xb4)
-#define        SWIE_ECELL_ADDR                 SWIE_BASE_ADDRESS+0xc0//SWIEExtractCell(0xc0-0xf4)
-
-#define SWIE_ISTAT_DONE                        0x1
-#define SWIE_ESTAT_DONE                        0x1
-#define        SWIE_ICMD_START                 0x00000001//Startcommandforinsertion
-#define        SWIE_CBM_SCE0                   CBM_HWEXCMD_SCE0//CBMcommandforSingle-Cell-Extract
-#define        SWIE_CBM_PID_SUBADDR            0x00001000//CBMPortIDandSubAddressforUTOPIA
-
-//Extracted cell format
-//52bytes AAL0 PDU + "Input cell additional data"(14bits)
-#define SWIE_ADDITION_DATA_MASK                0x7fff
-#define SWIE_EPORT_MASK                        0x7000//Source ID (000 AUB0, 001 AUB1)
-#define SWIE_EF4USER_MASK              0x800
-#define SWIE_EF5USER_MASK              0x400
-#define SWIE_EOAM_MASK                 0x200
-#define SWIE_EAUU_MASK                 0x100
-#define SWIE_EVCI3_MASK                        0x80
-#define SWIE_EVCI4_MASK                        0x40
-#define SWIE_EVCI6_MASK                        0x20
-#define SWIE_EPTI4_MASK                        0x10
-#define SWIE_EPTI5_MASK                        0x8
-#define SWIE_EPTI6_MASK                        0x4
-#define SWIE_EPTI7_MASK                        0x2
-#define SWIE_ECRC10ERROR_MASK          0x1
-
-#define CBM_CELL_SIZE                  0x40
-#define CBM_QD_SIZE                    0x10
-#define        AAL5R_TRAILER_LEN               12
-#define AAL5S_INBOUND_HEADER           8
-
-//constants
-//TODO: to be finalized by system guys
-//DMA QOS defined by ATM QoS Service type
-#define DMA_RX_CH0                     0
-#define DMA_RX_CH1                     1
-#define DMA_TX_CH0                     0
-#define DMA_TX_CH1                     1
-#define CBR_DMA_QOS                    CBM_QD_W3_QOS_0
-#define VBR_RT_DMA_QOS                 CBM_QD_W3_QOS_0
-#define VBR_NRT_DMA_QOS                        CBM_QD_W3_QOS_0
-#define UBR_PLUS_DMA_QOS               CBM_QD_W3_QOS_0
-#define UBR_DMA_QOS                    CBM_QD_W3_QOS_0
-
-#define        SRC_TOS_MIPS                    0
-#define        AAL5R_SRPN                      0x00000006//a5rneedshigherprioritythanDR
-#define        AAL5S_SRPN                      0x00000005
-#define        CBM_MIPS_SRPN                   0x00000004
-#define        QSB_SRPN                        0x00000023
-#define        HTU_SRPN1                       0x00000022
-#define        HTU_SRPN0                       0x00000021
-
-#endif //ATM_DEFINES_H
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h
deleted file mode 100644 (file)
index f863342..0000000
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef AMAZON_ATM_MIB_H
-#define AMAZON_ATM_MIB_H
-
-#ifdef CONFIG_IFX_ATM_MIB
-#include <asm/types.h>
-#ifdef __KERNEL__
-#include <linux/list.h>
-#endif
-#endif /* CONFIG_IFX_ATM_MIB */
-
-#ifndef __KERNEL__
-#include <atmMIB/local_list.h>
-typedef unsigned int __u32;
-#endif
-
-typedef struct{
-       __u32   ifHCInOctets_h;
-       __u32   ifHCInOctets_l;
-       __u32   ifHCOutOctets_h;
-       __u32   ifHCOutOctets_l;
-       __u32   ifInErrors;
-       __u32   ifInUnknownProtos;
-       __u32   ifOutErrors;
-}atm_cell_ifEntry_t;
-
-typedef struct{
-       __u32   ifHCInOctets_h;
-       __u32   ifHCInOctets_l;
-       __u32   ifHCOutOctets_h;
-       __u32   ifHCOutOctets_l;
-       __u32   ifInUcastPkts;
-       __u32   ifOutUcastPkts;
-       __u32   ifInErrors;
-       __u32   ifInDiscards;
-       __u32   ifOutErros;
-       __u32   ifOutDiscards;
-}atm_aal5_ifEntry_t;
-
-typedef struct{
-       __u32   aal5VccCrcErrors;
-       __u32   aal5VccSarTimeOuts;//no timer support yet
-       __u32   aal5VccOverSizedSDUs;
-}atm_aal5_vcc_t;
-
-#if defined(CONFIG_IFX_ATM_MIB) || defined(IFX_CONFIG_SNMP_ATM_MIB)
-/* ATM-MIB data structures */
-typedef struct atmIfConfEntry {
-       int ifIndex;
-    int atmInterfaceMaxVpcs;
-    int atmInterfaceMaxVccs;
-    int atmInterfaceConfVpcs;
-    int atmInterfaceConfVccs;
-    int atmInterfaceMaxActiveVpiBits;
-    int atmInterfaceMaxActiveVciBits;
-    int atmInterfaceIlmiVpi;
-    int atmInterfaceIlmiVci;
-    int atmInterfaceAddressType;
-    char atmInterfaceAdminAddress[40];
-    unsigned long atmInterfaceMyNeighborIpAddress;
-    char atmInterfaceMyNeighborIfName[20];
-    int atmInterfaceCurrentMaxVpiBits;
-    int atmInterfaceCurrentMaxVciBits;
-    char atmInterfaceSubscrAddress[40];
-    int flags;
-}atmIfConfEntry;
-
-typedef struct atmTrafficDescParamEntry {
-       /* Following three parameters are used to update VCC QoS values */
-       int ifIndex;
-       short atmVclvpi;
-       int atmVclvci;
-
-       unsigned int atmTrafficParamIndex;
-       unsigned char   traffic_class;  
-       int     max_pcr;
-       /* Subramani: Added min_pcr */
-       int     min_pcr;
-       int     cdv;
-       int     scr;
-       int     mbs;
-       int atmTrafficRowStatus;
-       int atmTrafficFrameDiscard;
-       struct list_head vpivci_head;
-       struct list_head list;
-}atmTrafficDescParamEntry;
-
-
-typedef struct  atmVclEntry {
-       int ifIndex;
-       short atmVclvpi;
-       int atmVclvci;
-       char vpivci[20];
-       int  atmVclAdminStatus;
-       int atmVclOperStatus;
-       unsigned long atmVclLastChange;
-       struct atmTrafficDescParamEntry *atmVclRxTrafficPtr;
-       struct atmTrafficDescParamEntry *atmVclTxTrafficPtr;
-       unsigned char atmVccAalType;
-       unsigned int atmVccAal5TxSduSize;
-       unsigned int atmVccAal5RxSduSize;
-       int atmVccAal5Encap;
-       int atmVclRowStatus;
-       int atmVclCastType;
-       int atmVclConnKind;
-       struct list_head list;
-       int flags;
-}atmVclEntry;
-
-
-typedef union union_atmptrs {
-       struct atmIfConfEntry *atmIfConfEntry_ptr;
-       struct atmTrafficDescParamEntry *atmTrafficDescParamEntry_ptr;
-       struct atmVclEntry *atmVclEntry_ptr;
-}union_atmptrs;
-
-/* ATM Character device major number */
-#define ATM_MEI_MAJOR  107
-
-/* Protocol Constants */
-#define IFX_PROTO_RAW               0
-#define IFX_PROTO_BR2684            1
-#define IFX_PROTO_PPPOATM           2
-#define IFX_PROTO_CLIP              3
-
-/* IOCTL Command Set for ATM-MIB */
-#define GET_ATM_IF_CONF_DATA  0x0AB0
-#define SET_ATM_IF_CONF_DATA  0x0AB1
-
-#define SET_ATM_QOS_DATA      0x0BC0
-
-#define GET_ATM_VCL_DATA      0x0CD0
-#define SET_ATM_VCL_DATA      0x0CD1
-
-#define FIND_VCC_IN_KERNEL       0x0DE0
-
-/* User defined flags for VCL Table */
-#define ATMVCCAAL5CPCSTRANSMITSDUSIZE  9  
-#define ATMVCCAAL5CPCSRECEIVESDUSIZE   10 
-
-#endif /* CONFIG_IFX_ATM_MIB || IFX_CONFIG_SNMP_ATM_MIB */
-
-#endif //AMAZON_ATM_MIB_H
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h
deleted file mode 100644 (file)
index 65f14e4..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-//*************************************************************************
-//* Summary of definitions which are used in each peripheral              *
-//*************************************************************************
-
-#ifndef peripheral_definitions_h
-#define peripheral_definitions_h
-
-typedef unsigned char          UINT8;
-typedef signed char            INT8;
-typedef unsigned short         UINT16;
-typedef signed short           INT16;
-typedef unsigned int           UINT32;
-typedef signed int             INT32;
-typedef unsigned long long     UINT64;
-typedef signed long long       INT64;
-
-#define REG8( addr )             (*(volatile UINT8 *) (addr))
-#define REG16( addr )            (*(volatile UINT16 *)(addr))
-#define REG32( addr )            (*(volatile UINT32 *)(addr))
-#define REG64( addr )            (*(volatile UINT64 *)(addr))
-
-/* define routine to set FPI access in Supervisor Mode */
-#define IFX_SUPERVISOR_ON()                         REG32(FB0_CFG) = 0x01
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_OFF()                        REG32(FB0_CFG) = 0x00
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_MODE()                       REG32(FB0_CFG)
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_SET(svm)                     REG32(FB0_CFG) = svm
-/* enable all Interrupts in IIU */
-//#define IFX_ENABLE_IRQ(irq_mask, im_base)           REG32(im_base | IIU_MASK) = irq_mask
-///* get all high priority interrupt bits in IIU */
-//#define IFX_GET_IRQ_MASKED(im_base)                 REG32(im_base | IIU_IRMASKED)
-///* signal ends of interrupt to IIU */
-//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base)      REG32(im_base | IIU_IR) = irq_bit
-///* force IIU interrupt register */
-//#define IFX_FORCE_IIU_REGISTER(data, im_base)       REG32(im_base | IIU_IRDEBUG) = data
-///* get all bits of interrupt register */
-//#define IFX_GET_IRQ_UNMASKED(im_base)               REG32(im_base | IIU_IR)
-/* insert a NOP instruction */
-#define NOP                                     _nop()
-/* CPU goes to power down mode until interrupt occurs */
-#define IFX_CPU_SLEEP                               _sleep()
-/* enable all interrupts to CPU */
-#define IFX_CPU_ENABLE_ALL_INTERRUPT                sys_enable_int()
-/* get all low priority interrupt bits in peripheral */
-#define IFX_GET_LOW_PRIO_IRQ(int_reg)               REG32(int_reg)
-/* clear low priority interrupt bit in peripheral */
-#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg)    REG32(int_reg) = irq_bit
-/* write FPI bus */
-#define WRITE_FPI_BYTE(data, addr)              REG8(addr) = data
-#define WRITE_FPI_16BIT(data, addr)             REG16(addr) = data
-#define WRITE_FPI_32BIT(data, addr)             REG32(addr) = data
-/* read FPI bus */
-#define READ_FPI_BYTE(addr)                     REG8(addr)
-#define READ_FPI_16BIT(addr)                    REG16(addr)
-#define READ_FPI_32BIT(addr)                    REG32(addr)
-/* write peripheral register */
-#define WRITE_PERIPHERAL_REGISTER(data, addr)   REG32(addr) = data 
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-/* read peripheral register */
-#define READ_PERIPHERAL_REGISTER(addr)          REG32(addr)
-
-/* read/modify(or)/write peripheral register */
-#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
-/* read/modify(and)/write peripheral register */
-#define RMW_AND_PERIPHERAL_REGISTER(data, addr)        REG32(addr) = REG32(addr) & (UINT32)data
-
-/* CPU-independent mnemonic constants */
-/* CLC register bits */
-#define IFX_CLC_ENABLE                0x00000000
-#define IFX_CLC_DISABLE               0x00000001
-#define IFX_CLC_DISABLE_STATUS        0x00000002
-#define IFX_CLC_SUSPEND_ENABLE        0x00000004
-#define IFX_CLC_CLOCK_OFF_DISABLE     0x00000008
-#define IFX_CLC_OVERWRITE_SPEN_FSOE   0x00000010
-#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
-#define IFX_CLC_RUN_DIVIDER_MASK      0x0000FF00
-#define IFX_CLC_RUN_DIVIDER_OFFSET    8
-#define IFX_CLC_SLEEP_DIVIDER_MASK    0x00FF0000
-#define IFX_CLC_SLEEP_DIVIDER_OFFSET  16
-#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
-
-/* number of cycles to wait for interrupt service routine to be called */
-#define WAIT_CYCLES   50
-
-#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h
deleted file mode 100644 (file)
index e5d73ad..0000000
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * ifx_ssc.h defines some data sructures used in ifx_ssc.c
- *
- * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
- *
- *
- */
-
-#ifndef __IFX_SSC_H
-#define __IFX_SSC_H
-#ifdef __KERNEL__
-#include <asm/amazon/ifx_ssc_defines.h>
-#endif  //__KERNEL__
-
-#define PORT_CNT               1       // assume default value
-
-/* symbolic constants to be used in SSC routines */
-
-// ### TO DO: bad performance
-#define IFX_SSC_TXFIFO_ITL     1
-#define IFX_SSC_RXFIFO_ITL     1
-
-
-
-struct ifx_ssc_statistics{
-       unsigned int  abortErr;   /* abort error */       
-       unsigned int  modeErr;    /* master/slave mode error */       
-       unsigned int  txOvErr;    /* TX Overflow error */         
-       unsigned int  txUnErr;    /* TX Underrun error */         
-       unsigned int  rxOvErr;    /* RX Overflow error */         
-       unsigned int  rxUnErr;    /* RX Underrun error */
-       unsigned int  rxBytes;
-       unsigned int  txBytes;
-};
-
-
-struct ifx_ssc_hwopts {
-       unsigned int  AbortErrDetect :1;   /* Abort Error detection (in slave mode) */
-       unsigned int  rxOvErrDetect  :1;   /* Receive Overflow Error detection */
-       unsigned int  rxUndErrDetect :1;   /* Receive Underflow Error detection */
-       unsigned int  txOvErrDetect  :1;   /* Transmit Overflow Error detection */
-       unsigned int  txUndErrDetect :1;   /* Transmit Underflow Error detection */
-       unsigned int  echoMode       :1;   /* Echo mode */
-       unsigned int  loopBack       :1;   /* Loopback mode */
-       unsigned int  idleValue      :1;   /* Idle value */
-       unsigned int  clockPolarity  :1;   /* Idle clock is high or low */
-       unsigned int  clockPhase     :1;   /* Tx on trailing or leading edge*/
-       unsigned int  headingControl :1;   /* LSB first or MSB first */
-       unsigned int  dataWidth      :6;   /* from 2 up to 32 bits */
-       unsigned int  masterSelect   :1;   /* Master or Slave mode */
-       unsigned int  modeRxTx       :2;   /* rx/tx mode */
-       unsigned int  gpoCs          :8;   /* choose outputs to use for chip select */
-       unsigned int  gpoInv         :8;   /* invert GPO outputs */
-};
-
-
-struct ifx_ssc_frm_opts {
-       bool            FrameEnable;    // SFCON.SFEN
-       unsigned int    DataLength;     // SFCON.DLEN
-       unsigned int    PauseLength;    // SFCON.PLEN
-       unsigned int    IdleData;       // SFCON.IDAT
-       unsigned int    IdleClock;      // SFCON.ICLK
-       bool            StopAfterPause; // SFCON.STOP
-};
-
-struct ifx_ssc_frm_status {
-       bool            DataBusy;       // SFSTAT.DBSY
-       bool            PauseBusy;      // SFSTAT.PBSY
-       unsigned int    DataCount;      // SFSTAT.DCNT
-       unsigned int    PauseCount;     // SFSTAT.PCNT
-       bool            EnIntAfterData; // SFCON.IBEN
-       bool            EnIntAfterPause;// SFCON.IAEN
-};
-
-typedef struct {
-       char    *buf;
-       size_t  len;
-} ifx_ssc_buf_item_t;
-
-
-// data structures for batch execution
-typedef union {
-       struct {
-               bool            save_options;
-       } init;
-       ifx_ssc_buf_item_t      read;
-       ifx_ssc_buf_item_t      write;
-       ifx_ssc_buf_item_t      rd_wr;
-       unsigned int    set_baudrate;
-       struct ifx_ssc_frm_opts set_frm;
-       unsigned int    set_gpo;
-       struct ifx_ssc_hwopts set_hwopts;
-}ifx_ssc_batch_cmd_param;
-
-struct ifx_ssc_batch_list {
-       unsigned int                    cmd;
-       ifx_ssc_batch_cmd_param         cmd_param;
-       struct ifx_ssc_batch_list       *next;
-};
-
-#ifdef __KERNEL__
-#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
-
-
-struct ifx_ssc_port{
-       unsigned long           mapbase;
-       struct ifx_ssc_hwopts   opts;
-       struct ifx_ssc_statistics stats;
-       struct ifx_ssc_frm_status frm_status;
-       struct ifx_ssc_frm_opts frm_opts;
-       /* wait queue for ifx_ssc_read() */
-       wait_queue_head_t       rwait, pwait;
-        int                    port_nr;
-       char                    port_is_open; /* exclusive open  - boolean */
-//     int no_of_bits; /* number of _valid_ bits */
-//     int elem_size; /* shift for element (no of bytes)*/
-       /* buffer and pointers to the read/write position */
-       char                    *rxbuf; /* buffer for RX */
-        char                    *rxbuf_end; /* buffer end pointer for RX */
-       volatile char           *rxbuf_ptr; /* buffer write pointer for RX */
-       char                    *txbuf; /* buffer for TX */
-        char                    *txbuf_end; /* buffer end pointer for TX */
-       volatile char           *txbuf_ptr; /* buffer read pointer for TX */
-       unsigned int            baud;
-       /* each channel has its own interrupts */
-       /* (transmit/receive/error/frame) */
-       unsigned int txirq, rxirq, errirq, frmirq;
-};
-/* default values for SSC configuration */
-// values of CON
-#define IFX_SSC_DEF_IDLE_DATA       1  /* enable */
-#define IFX_SSC_DEF_BYTE_VALID_CTL  1  /* enable */
-#define IFX_SSC_DEF_DATA_WIDTH      32 /* bits */
-#define IFX_SSC_DEF_ABRT_ERR_DETECT 0  /* disable */
-#define IFX_SSC_DEF_RO_ERR_DETECT   1  /* enable */
-#define IFX_SSC_DEF_RU_ERR_DETECT   0  /* disable */
-#define IFX_SSC_DEF_TO_ERR_DETECT   0  /* disable */
-#define IFX_SSC_DEF_TU_ERR_DETECT   0  /* disable */
-#define IFX_SSC_DEF_LOOP_BACK       0  /* disable */
-#define IFX_SSC_DEF_ECHO_MODE       0  /* disable */
-#define IFX_SSC_DEF_CLOCK_POLARITY  0  /* low */
-#define IFX_SSC_DEF_CLOCK_PHASE     1  /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
-#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
-#define IFX_SSC_DEF_MODE_RXTX      IFX_SSC_MODE_RXTX
-// other values
-#define IFX_SSC_DEF_MASTERSLAVE            IFX_SSC_MASTER_MODE /* master */
-#define IFX_SSC_DEF_BAUDRATE       1000000
-#define IFX_SSC_DEF_RMC                    0x10
-
-#define IFX_SSC_DEF_TXFIFO_FL       8
-#define IFX_SSC_DEF_RXFIFO_FL       1
-
-#if 1 //TODO
-#define IFX_SSC_DEF_GPO_CS         2   /* no chip select */
-#define IFX_SSC_DEF_GPO_INV        0   /* no chip select */
-#else
-#error "what is ur Chip Select???"
-#endif
-#define IFX_SSC_DEF_SFCON          0   /* no serial framing */
-#if 0
-#define IFX_SSC_DEF_IRNEN          IFX_SSC_T_BIT | /* enable all int's */\
-                                   IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
-#endif
-#define IFX_SSC_DEF_IRNEN          IFX_SSC_T_BIT | /* enable all int's */\
-                                   IFX_SSC_R_BIT | IFX_SSC_E_BIT
-#endif /* __KERNEL__ */
-
-// batch execution commands
-#define IFX_SSC_BATCH_CMD_INIT         1
-#define IFX_SSC_BATCH_CMD_READ         2
-#define IFX_SSC_BATCH_CMD_WRITE                3
-#define IFX_SSC_BATCH_CMD_RD_WR                4
-#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
-#define IFX_SSC_BATCH_CMD_SET_HWOPTS   6
-#define IFX_SSC_BATCH_CMD_SET_FRM      7
-#define IFX_SSC_BATCH_CMD_SET_GPO      8
-#define IFX_SSC_BATCH_CMD_FIFO_FLUSH   9
-//#define IFX_SSC_BATCH_CMD_   
-//#define IFX_SSC_BATCH_CMD_   
-#define IFX_SSC_BATCH_CMD_END_EXEC     0
-/* Macros to configure SSC hardware */
-/* headingControl: */
-#define IFX_SSC_LSB_FIRST            0
-#define IFX_SSC_MSB_FIRST            1
-/* dataWidth: */
-#define IFX_SSC_MIN_DATA_WIDTH       2
-#define IFX_SSC_MAX_DATA_WIDTH       32
-/* master/slave mode select */
-#define IFX_SSC_MASTER_MODE          1
-#define IFX_SSC_SLAVE_MODE           0
-/* rx/tx mode */
-// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
-#define IFX_SSC_MODE_RXTX           0
-#define IFX_SSC_MODE_RX                     1
-#define IFX_SSC_MODE_TX                     2
-#define IFX_SSC_MODE_OFF            3
-#define IFX_SSC_MODE_MASK           IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
-
-/* GPO values */
-#define IFX_SSC_MAX_GPO_OUT         7
-
-#define IFX_SSC_RXREQ_BLOCK_SIZE     32768
-
-/***********************/
-/* defines for ioctl's */
-/***********************/
-#define IFX_SSC_IOCTL_MAGIC     'S'
-/* read out the statistics */
-#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
-/* clear the statistics */
-#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
-/* set the baudrate */
-#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
-/* get the current baudrate */
-#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
-/* set hardware options */
-#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
-/* get the current hardware options */
-#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
-/* set transmission mode */
-#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
-/* get the current transmission mode */
-#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
-/* abort transmission */
-#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
-#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
-
-/* set general purpose outputs */
-#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
-/* clear general purpose outputs */
-#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
-/* get general purpose outputs */
-#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
-
-/*** serial framing ***/
-/* get status of serial framing */
-#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
-/* get counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
-/* set counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
-
-
-/*** batch execution ***/
-/* do batch execution */
-#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
-
-
-#ifdef __KERNEL__
-// routines from ifx_ssc.c
-// ### TO DO
-/* kernel interface for read and write */
-ssize_t ifx_ssc_kread(int, char *, size_t);
-ssize_t ifx_ssc_kwrite(int, const char *, size_t);
-
-#ifdef CONFIG_IFX_VP_KERNEL_TEST
-void ifx_ssc_tc(void);
-#endif // CONFIG_IFX_VP_KERNEL_TEST
-
-#endif //__KERNEL__
-#endif // __IFX_SSC_H
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h
deleted file mode 100644 (file)
index 46157dc..0000000
+++ /dev/null
@@ -1,552 +0,0 @@
-#ifndef IFX_SSC_DEFINES_H
-#define IFX_SSC_DEFINES_H
-
-#include "ifx_peripheral_definitions.h"
-
-/* maximum SSC FIFO size */
-#define IFX_SSC_MAX_FIFO_SIZE 32
-
-/* register map of SSC  */
-
-/* address of the Clock Control Register of the SSC */
-#define IFX_SSC_CLC                 0x00000000
-/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0  
-   bit 1 is hardware modified*/
-#define IFX_SSC_CLC_readmask  0x00FFFFEF
-#define IFX_SSC_CLC_writemask 0x00FFFF3D
-#define IFX_SSC_CLC_hwmask    0x00000002
-#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
-
-/* address of Port Input Select Register of the SSC */
-#define IFX_SSC_PISEL 0x00000004
-/* IFX_SSC_PISEL register is significant in lowest three bits only */
-#define IFX_SSC_PISEL_readmask  0x00000007
-#define IFX_SSC_PISEL_writemask 0x00000007
-#define IFX_SSC_PISEL_hwmask    0x00000000
-#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
-
-/* address of Identification Register of the SSC */
-#define IFX_SSC_ID 0x00000008
-/* IFX_SSC_ID register is significant in no bit */
-#define IFX_SSC_ID_readmask  0x0000FF3F
-#define IFX_SSC_ID_writemask 0x00000000
-#define IFX_SSC_ID_hwmask    0x00000000
-#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
-
-/* address of the Control Register of the SSC */
-#define IFX_SSC_CON            0x00000010
-/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
-#define IFX_SSC_CON_readmask  0x01DF1FFF
-#define IFX_SSC_CON_writemask 0x01DF1FFF
-#define IFX_SSC_CON_hwmask    0x00000000
-#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
-
-
-/* address of the Status Register of the SSC */
-#define IFX_SSC_STATE          0x00000014
-/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
-   all bits except 1:0 are hardware modified */
-#define IFX_SSC_STATE_readmask  0x771F3F87
-#define IFX_SSC_STATE_writemask 0x00000000
-#define IFX_SSC_STATE_hwmask    0x771F3F84
-#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
-
-/* address of the Write Hardware Modified Control Register Bits of the SSC */
-#define IFX_SSC_WHBSTATE            0x00000018
-/* IFX_SSC_WHBSTATE register is write only */
-#define IFX_SSC_WHBSTATE_readmask  0x00000000
-#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
-#define IFX_SSC_WHBSTATE_hwmask    0x00000000
-#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
-
-/* address of the Baudrate Timer Reload Register of the SSC */
-#define IFX_SSC_BR              0x00000040
-/* IFX_SSC_BR register is significant in  bit 15 downto 0*/
-#define IFX_SSC_BR_readmask  0x0000FFFF
-#define IFX_SSC_BR_writemask 0x0000FFFF
-#define IFX_SSC_BR_hwmask    0x00000000
-#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
-
-/* address of the Baudrate Timer Status Register of the SSC */
-#define IFX_SSC_BRSTAT              0x00000044
-/* IFX_SSC_BRSTAT register is significant in  bit 15 downto 0*/
-#define IFX_SSC_BRSTAT_readmask  0x0000FFFF
-#define IFX_SSC_BRSTAT_writemask 0x00000000
-#define IFX_SSC_BRSTAT_hwmask    0x0000FFFF
-#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
-
-/* address of the Transmitter Buffer Register of the SSC */
-#define IFX_SSC_TB              0x00000020
-/* IFX_SSC_TB register is significant in  bit 31 downto 0*/
-#define IFX_SSC_TB_readmask  0xFFFFFFFF
-#define IFX_SSC_TB_writemask 0xFFFFFFFF
-#define IFX_SSC_TB_hwmask    0x00000000
-#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
-
-/* address of the Reciver Buffer Register of the SSC */
-#define IFX_SSC_RB              0x00000024
-/* IFX_SSC_RB register is significant in no bits*/
-#define IFX_SSC_RB_readmask  0xFFFFFFFF
-#define IFX_SSC_RB_writemask 0x00000000
-#define IFX_SSC_RB_hwmask    0xFFFFFFFF
-#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
-
-/* address of the Receive FIFO Control Register of the SSC */
-#define IFX_SSC_RXFCON              0x00000030
-/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_RXFCON_readmask  0x00003F03
-#define IFX_SSC_RXFCON_writemask 0x00003F03
-#define IFX_SSC_RXFCON_hwmask    0x00000000
-#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
-
-/* address of the Transmit FIFO Control Register of the SSC */
-#define IFX_SSC_TXFCON              0x00000034
-/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_TXFCON_readmask  0x00003F03
-#define IFX_SSC_TXFCON_writemask 0x00003F03
-#define IFX_SSC_TXFCON_hwmask    0x00000000
-#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
-
-/* address of the FIFO Status Register of the SSC */
-#define IFX_SSC_FSTAT               0x00000038
-/* IFX_SSC_FSTAT register is significant in no bit*/
-#define IFX_SSC_FSTAT_readmask  0x00003F3F
-#define IFX_SSC_FSTAT_writemask 0x00000000
-#define IFX_SSC_FSTAT_hwmask    0x00003F3F
-#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
-
-/* address of the Data Frame Control register of the SSC */
-#define IFX_SSC_SFCON               0x00000060
-#define IFX_SSC_SFCON_readmask  0xFFDFFFFD
-#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
-#define IFX_SSC_SFCON_hwmask    0x00000000
-#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
-
-/* address of the Data Frame Status register of the SSC */
-#define IFX_SSC_SFSTAT               0x00000064
-#define IFX_SSC_SFSTAT_readmask  0xFFC0FFF3
-#define IFX_SSC_SFSTAT_writemask 0x00000000
-#define IFX_SSC_SFSTAT_hwmask    0xFFC0FFF3
-#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
-
-/* address of the General Purpose Output Control register of the SSC */
-#define IFX_SSC_GPOCON               0x00000070
-#define IFX_SSC_GPOCON_readmask  0x0000FFFF
-#define IFX_SSC_GPOCON_writemask 0x0000FFFF
-#define IFX_SSC_GPOCON_hwmask    0x00000000
-#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
-
-/* address of the General Purpose Output Status register of the SSC */
-#define IFX_SSC_GPOSTAT               0x00000074
-#define IFX_SSC_GPOSTAT_readmask  0x000000FF
-#define IFX_SSC_GPOSTAT_writemask 0x00000000
-#define IFX_SSC_GPOSTAT_hwmask    0x00000000
-#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
-
-/* address of the Force GPO Status register of the SSC */
-#define IFX_SSC_WHBGPOSTAT               0x00000078
-#define IFX_SSC_WHBGPOSTAT_readmask  0x00000000
-#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
-#define IFX_SSC_WHBGPOSTAT_hwmask    0x00000000
-#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
-
-/* address of the Receive Request Register of the SSC */
-#define IFX_SSC_RXREQ               0x00000080
-#define IFX_SSC_RXREQ_readmask  0x0000FFFF
-#define IFX_SSC_RXREQ_writemask 0x0000FFFF
-#define IFX_SSC_RXREQ_hwmask    0x00000000
-#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
-
-/* address of the Receive Count Register of the SSC */
-#define IFX_SSC_RXCNT               0x00000084
-#define IFX_SSC_RXCNT_readmask  0x0000FFFF
-#define IFX_SSC_RXCNT_writemask 0x00000000
-#define IFX_SSC_RXCNT_hwmask    0x0000FFFF
-#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
-
-/* address of the DMA Configuration Register of the SSC */
-#define IFX_SSC_DMACON               0x000000EC
-#define IFX_SSC_DMACON_readmask  0x0000FFFF
-#define IFX_SSC_DMACON_writemask 0x00000000
-#define IFX_SSC_DMACON_hwmask    0x0000FFFF
-#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
-
-//------------------------------------------------------
-// interrupt register for enabling interrupts, mask register of irq_reg
-#define IFX_SSC_IRN_EN 0xF4
-// read/write
-#define IFX_SSC_IRN_EN_readmask  0x0000000F
-#define IFX_SSC_IRN_EN_writemask 0x0000000F
-#define IFX_SSC_IRN_EN_hwmask    0x00000000
-#define IFX_SSC_IRN_EN_dontcare  (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
-
-// interrupt register for accessing interrupts
-#define IFX_SSC_IRN_CR                0xF8
-// read/write
-#define IFX_SSC_IRN_CR_readmask  0x0000000F
-#define IFX_SSC_IRN_CR_writemask 0x0000000F
-#define IFX_SSC_IRN_CR_hwmask    0x0000000F
-#define IFX_SSC_IRN_CR_dontcare  (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
-
-// interrupt register for stimulating interrupts
-#define IFX_SSC_IRN_ICR                  0xFC
-// read/write
-#define IFX_SSC_IRN_ICR_readmask  0x0000000F
-#define IFX_SSC_IRN_ICR_writemask 0x0000000F
-#define IFX_SSC_IRN_ICR_hwmask    0x00000000
-#define IFX_SSC_IRN_ICR_dontcare  (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
-
-//---------------------------------------------------------------------
-// Number of IRQs and bitposition of IRQ
-#define IFX_SSC_NUM_IRQ           4
-#define IFX_SSC_T_BIT       0x00000001
-#define IFX_SSC_R_BIT       0x00000002
-#define IFX_SSC_E_BIT       0x00000004
-#define IFX_SSC_F_BIT       0x00000008
-
-/* bit masks for SSC registers */
-
-/* ID register */
-#define IFX_SSC_PERID_REV_MASK      0x0000001F
-#define IFX_SSC_PERID_CFG_MASK      0x00000020
-#define IFX_SSC_PERID_ID_MASK       0x0000FF00
-#define IFX_SSC_PERID_REV_OFFSET    0
-#define IFX_SSC_PERID_CFG_OFFSET    5
-#define IFX_SSC_PERID_ID_OFFSET     8
-#define IFX_SSC_PERID_ID            0x45
-#define IFX_SSC_PERID_DMA_ON        0x00000020
-#define IFX_SSC_PERID_RXFS_MASK     0x003F0000
-#define IFX_SSC_PERID_RXFS_OFFSET   16
-#define IFX_SSC_PERID_TXFS_MASK     0x3F000000
-#define IFX_SSC_PERID_TXFS_OFFSET   24
-
-/* PISEL register */
-#define IFX_SSC_PISEL_MASTER_IN_A       0x0000
-#define IFX_SSC_PISEL_MASTER_IN_B       0x0001
-#define IFX_SSC_PISEL_SLAVE_IN_A        0x0000
-#define IFX_SSC_PISEL_SLAVE_IN_B        0x0002
-#define IFX_SSC_PISEL_CLOCK_IN_A        0x0000
-#define IFX_SSC_PISEL_CLOCK_IN_B        0x0004
-
-
-/* IFX_SSC_CON register */
-#define IFX_SSC_CON_ECHO_MODE_ON       0x01000000
-#define IFX_SSC_CON_ECHO_MODE_OFF      0x00000000
-#define IFX_SSC_CON_IDLE_HIGH          0x00800000
-#define IFX_SSC_CON_IDLE_LOW           0x00000000
-#define IFX_SSC_CON_ENABLE_BYTE_VALID  0x00400000
-#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
-#define IFX_SSC_CON_DATA_WIDTH_OFFSET  16
-#define IFX_SSC_CON_DATA_WIDTH_MASK    0x001F0000
-#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
-
-#define IFX_SSC_CON_RESET_ON_BAUDERR   0x00002000
-#define IFX_SSC_CON_GO_ON_ON_BAUDERR   0x00000000
-
-#define IFX_SSC_CON_RX_UFL_CHECK       0x00001000
-#define IFX_SSC_CON_RX_UFL_IGNORE      0x00000000
-#define IFX_SSC_CON_TX_UFL_CHECK       0x00000800
-#define IFX_SSC_CON_TX_UFL_IGNORE      0x00000000
-#define IFX_SSC_CON_ABORT_ERR_CHECK    0x00000400
-#define IFX_SSC_CON_ABORT_ERR_IGNORE   0x00000000
-#define IFX_SSC_CON_RX_OFL_CHECK       0x00000200
-#define IFX_SSC_CON_RX_OFL_IGNORE      0x00000000
-#define IFX_SSC_CON_TX_OFL_CHECK       0x00000100
-#define IFX_SSC_CON_TX_OFL_IGNORE      0x00000000
-#define IFX_SSC_CON_ALL_ERR_CHECK      0x00001F00
-#define IFX_SSC_CON_ALL_ERR_IGNORE     0x00000000
-
-#define IFX_SSC_CON_LOOPBACK_MODE      0x00000080
-#define IFX_SSC_CON_NO_LOOPBACK        0x00000000
-#define IFX_SSC_CON_HALF_DUPLEX        0x00000080
-#define IFX_SSC_CON_FULL_DUPLEX        0x00000000
-#define IFX_SSC_CON_CLOCK_FALL         0x00000040
-#define IFX_SSC_CON_CLOCK_RISE         0x00000000
-#define IFX_SSC_CON_SHIFT_THEN_LATCH   0x00000000
-#define IFX_SSC_CON_LATCH_THEN_SHIFT   0x00000020
-#define IFX_SSC_CON_MSB_FIRST          0x00000010
-#define IFX_SSC_CON_LSB_FIRST          0x00000000
-#define IFX_SSC_CON_ENABLE_CSB         0x00000008
-#define IFX_SSC_CON_DISABLE_CSB        0x00000000
-#define IFX_SSC_CON_INVERT_CSB         0x00000004
-#define IFX_SSC_CON_TRUE_CSB           0x00000000
-#define IFX_SSC_CON_RX_OFF             0x00000002
-#define IFX_SSC_CON_RX_ON              0x00000000
-#define IFX_SSC_CON_TX_OFF             0x00000001
-#define IFX_SSC_CON_TX_ON              0x00000000
-
-
-/* IFX_SSC_STATE register */
-#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
-#define IFX_SSC_STATE_RX_BYTE_VALID_MASK   0x70000000
-#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
-#define IFX_SSC_STATE_TX_BYTE_VALID_MASK   0x07000000
-#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_BIT_COUNT_OFFSET     16
-#define IFX_SSC_STATE_BIT_COUNT_MASK       0x001F0000
-#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
-#define IFX_SSC_STATE_BUSY                 0x00002000
-#define IFX_SSC_STATE_RX_UFL               0x00001000
-#define IFX_SSC_STATE_TX_UFL               0x00000800
-#define IFX_SSC_STATE_ABORT_ERR            0x00000400
-#define IFX_SSC_STATE_RX_OFL               0x00000200
-#define IFX_SSC_STATE_TX_OFL               0x00000100
-#define IFX_SSC_STATE_MODE_ERR             0x00000080
-#define IFX_SSC_STATE_SLAVE_IS_SELECTED    0x00000004
-#define IFX_SSC_STATE_IS_MASTER            0x00000002
-#define IFX_SSC_STATE_IS_ENABLED           0x00000001
-                             
-/* WHBSTATE register */
-#define IFX_SSC_WHBSTATE_DISABLE_SSC        0x0001
-#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
-#define IFX_SSC_WHBSTATE_CLR_ENABLE         0x0001
-
-#define IFX_SSC_WHBSTATE_ENABLE_SSC         0x0002
-#define IFX_SSC_WHBSTATE_RUN_MODE           0x0002
-#define IFX_SSC_WHBSTATE_SET_ENABLE         0x0002
-
-#define IFX_SSC_WHBSTATE_SLAVE_MODE         0x0004
-#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT  0x0004
-
-#define IFX_SSC_WHBSTATE_MASTER_MODE        0x0008
-#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT  0x0008
-
-#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR   0x0010
-#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR   0x0020
-
-#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR     0x0040
-#define IFX_SSC_WHBSTATE_SET_MODE_ERROR     0x0080
-
-#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR   0x0100
-#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR   0x0200
-#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR    0x0400
-#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR   0x0800
-#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR   0x1000
-#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR   0x2000
-#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR    0x4000
-#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR   0x8000
-#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR      0x0F50
-#define IFX_SSC_WHBSTATE_SET_ALL_ERROR      0xF0A0
-
-/* BR register */
-#define IFX_SSC_BR_BAUDRATE_OFFSET      0
-#define IFX_SSC_BR_BAUDRATE_MASK        0xFFFF
-
-/* BR_STAT register */
-#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET      0
-#define IFX_SSC_BRSTAT_BAUDTIMER_MASK        0xFFFF
-
-/* TB register */
-#define IFX_SSC_TB_DATA_OFFSET      0
-#define IFX_SSC_TB_DATA_MASK        0xFFFFFFFF
-
-/* RB register */
-#define IFX_SSC_RB_DATA_OFFSET      0
-#define IFX_SSC_RB_DATA_MASK        0xFFFFFFFF
-
-
-/* RXFCON and TXFCON registers */
-#define IFX_SSC_XFCON_FIFO_DISABLE      0x0000
-#define IFX_SSC_XFCON_FIFO_ENABLE       0x0001
-#define IFX_SSC_XFCON_FIFO_FLUSH        0x0002
-#define IFX_SSC_XFCON_ITL_MASK          0x00003F00
-#define IFX_SSC_XFCON_ITL_OFFSET        8
-
-/* FSTAT register */
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET  0
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK    0x003F
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET  8
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK    0x3F00
-
-/* GPOCON register */
-#define IFX_SSC_GPOCON_INVOUT0_POS      0
-#define IFX_SSC_GPOCON_INV_OUT0         0x00000001
-#define IFX_SSC_GPOCON_TRUE_OUT0        0x00000000
-#define IFX_SSC_GPOCON_INVOUT1_POS      1
-#define IFX_SSC_GPOCON_INV_OUT1         0x00000002
-#define IFX_SSC_GPOCON_TRUE_OUT1        0x00000000
-#define IFX_SSC_GPOCON_INVOUT2_POS      2
-#define IFX_SSC_GPOCON_INV_OUT2         0x00000003
-#define IFX_SSC_GPOCON_TRUE_OUT2        0x00000000
-#define IFX_SSC_GPOCON_INVOUT3_POS      3
-#define IFX_SSC_GPOCON_INV_OUT3         0x00000008
-#define IFX_SSC_GPOCON_TRUE_OUT3        0x00000000
-#define IFX_SSC_GPOCON_INVOUT4_POS      4
-#define IFX_SSC_GPOCON_INV_OUT4         0x00000010
-#define IFX_SSC_GPOCON_TRUE_OUT4        0x00000000
-#define IFX_SSC_GPOCON_INVOUT5_POS      5
-#define IFX_SSC_GPOCON_INV_OUT5         0x00000020
-#define IFX_SSC_GPOCON_TRUE_OUT5        0x00000000
-#define IFX_SSC_GPOCON_INVOUT6_POS      6
-#define IFX_SSC_GPOCON_INV_OUT6         0x00000040
-#define IFX_SSC_GPOCON_TRUE_OUT6        0x00000000
-#define IFX_SSC_GPOCON_INVOUT7_POS      7
-#define IFX_SSC_GPOCON_INV_OUT7         0x00000080
-#define IFX_SSC_GPOCON_TRUE_OUT7        0x00000000
-#define IFX_SSC_GPOCON_INV_OUT_ALL      0x000000FF
-#define IFX_SSC_GPOCON_TRUE_OUT_ALL     0x00000000
-
-#define IFX_SSC_GPOCON_ISCSB0_POS       8
-#define IFX_SSC_GPOCON_IS_CSB0          0x00000100
-#define IFX_SSC_GPOCON_IS_GPO0          0x00000000
-#define IFX_SSC_GPOCON_ISCSB1_POS       9
-#define IFX_SSC_GPOCON_IS_CSB1          0x00000200
-#define IFX_SSC_GPOCON_IS_GPO1          0x00000000
-#define IFX_SSC_GPOCON_ISCSB2_POS       10
-#define IFX_SSC_GPOCON_IS_CSB2          0x00000400
-#define IFX_SSC_GPOCON_IS_GPO2          0x00000000
-#define IFX_SSC_GPOCON_ISCSB3_POS       11
-#define IFX_SSC_GPOCON_IS_CSB3          0x00000800
-#define IFX_SSC_GPOCON_IS_GPO3          0x00000000
-#define IFX_SSC_GPOCON_ISCSB4_POS       12
-#define IFX_SSC_GPOCON_IS_CSB4          0x00001000
-#define IFX_SSC_GPOCON_IS_GPO4          0x00000000
-#define IFX_SSC_GPOCON_ISCSB5_POS       13
-#define IFX_SSC_GPOCON_IS_CSB5          0x00002000
-#define IFX_SSC_GPOCON_IS_GPO5          0x00000000
-#define IFX_SSC_GPOCON_ISCSB6_POS       14
-#define IFX_SSC_GPOCON_IS_CSB6          0x00004000
-#define IFX_SSC_GPOCON_IS_GPO6          0x00000000
-#define IFX_SSC_GPOCON_ISCSB7_POS       15
-#define IFX_SSC_GPOCON_IS_CSB7          0x00008000
-#define IFX_SSC_GPOCON_IS_GPO7          0x00000000
-#define IFX_SSC_GPOCON_IS_CSB_ALL       0x0000FF00
-#define IFX_SSC_GPOCON_IS_GPO_ALL       0x00000000
-
-/* GPOSTAT register */
-#define IFX_SSC_GPOSTAT_OUT0            0x00000001
-#define IFX_SSC_GPOSTAT_OUT1            0x00000002
-#define IFX_SSC_GPOSTAT_OUT2            0x00000004
-#define IFX_SSC_GPOSTAT_OUT3            0x00000008
-#define IFX_SSC_GPOSTAT_OUT4            0x00000010
-#define IFX_SSC_GPOSTAT_OUT5            0x00000020
-#define IFX_SSC_GPOSTAT_OUT6            0x00000040
-#define IFX_SSC_GPOSTAT_OUT7            0x00000080
-#define IFX_SSC_GPOSTAT_OUT_ALL         0x000000FF
-
-/* WHBGPOSTAT register */
-#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS  0
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT0     0x00000001
-#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS  1
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT1     0x00000002
-#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS  2
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT2     0x00000004
-#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS  3
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT3     0x00000008
-#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS  4
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT4     0x00000010
-#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS  5
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT5     0x00000020
-#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS  6
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT6     0x00000040
-#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS  7
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT7     0x00000080
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL  0x000000FF
-
-#define IFX_SSC_WHBGPOSTAT_OUT0_POS  0
-#define IFX_SSC_WHBGPOSTAT_OUT1_POS  1
-#define IFX_SSC_WHBGPOSTAT_OUT2_POS  2
-#define IFX_SSC_WHBGPOSTAT_OUT3_POS  3
-#define IFX_SSC_WHBGPOSTAT_OUT4_POS  4
-#define IFX_SSC_WHBGPOSTAT_OUT5_POS  5
-#define IFX_SSC_WHBGPOSTAT_OUT6_POS  6
-#define IFX_SSC_WHBGPOSTAT_OUT7_POS  7
-
-
-#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS  8
-#define IFX_SSC_WHBGPOSTAT_SET_OUT0     0x00000100
-#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS  9
-#define IFX_SSC_WHBGPOSTAT_SET_OUT1     0x00000200
-#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS  10
-#define IFX_SSC_WHBGPOSTAT_SET_OUT2     0x00000400
-#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS  11
-#define IFX_SSC_WHBGPOSTAT_SET_OUT3     0x00000800
-#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS  12
-#define IFX_SSC_WHBGPOSTAT_SET_OUT4     0x00001000
-#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS  13
-#define IFX_SSC_WHBGPOSTAT_SET_OUT5     0x00002000
-#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS  14
-#define IFX_SSC_WHBGPOSTAT_SET_OUT6     0x00004000
-#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS  15
-#define IFX_SSC_WHBGPOSTAT_SET_OUT7     0x00008000
-#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL  0x0000FF00
-
-/* SFCON register */
-#define IFX_SSC_SFCON_SF_ENABLE                0x00000001
-#define IFX_SSC_SFCON_SF_DISABLE               0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE  0x00000004
-#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE   0x00000008
-#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE  0x00000000
-#define IFX_SSC_SFCON_DATA_LENGTH_MASK         0x0000FFF0
-#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET       4
-#define IFX_SSC_SFCON_PAUSE_DATA_MASK          0x00030000
-#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET        16
-#define IFX_SSC_SFCON_PAUSE_DATA_0             0x00000000
-#define IFX_SSC_SFCON_PAUSE_DATA_1             0x00010000
-#define IFX_SSC_SFCON_PAUSE_DATA_IDLE          0x00020000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK         0x000C0000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET       18
-#define IFX_SSC_SFCON_PAUSE_CLOCK_0            0x00000000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_1            0x00040000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE         0x00080000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN          0x000C0000
-#define IFX_SSC_SFCON_STOP_AFTER_PAUSE         0x00100000
-#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE     0x00000000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK        0xFFC00000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET      22
-#define IFX_SSC_SFCON_DATA_LENGTH_MAX         4096
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX        1024
-
-#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon)  ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_SET_DATA_LENGTH(value)      ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
-#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value)      ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
-
-/* SFSTAT register */
-#define IFX_SSC_SFSTAT_IN_DATA            0x00000001
-#define IFX_SSC_SFSTAT_IN_PAUSE           0x00000002
-#define IFX_SSC_SFSTAT_DATA_COUNT_MASK    0x0000FFF0
-#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET  4
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK   0xFFF00000
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
-
-#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
-#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
-
-/* RXREQ register */
-#define IFX_SSC_RXREQ_RXCOUNT_MASK       0x0000FFFF
-#define IFX_SSC_RXREQ_RXCOUNT_OFFSET     0
-
-/* RXCNT register */
-#define IFX_SSC_RXCNT_TODO_MASK       0x0000FFFF
-#define IFX_SSC_RXCNT_TODO_OFFSET     0
-
-/* DMACON register */
-#define IFX_SSC_DMACON_RXON           0x00000001
-#define IFX_SSC_DMACON_RXOFF          0x00000000
-#define IFX_SSC_DMACON_TXON           0x00000002
-#define IFX_SSC_DMACON_TXOFF          0x00000000
-#define IFX_SSC_DMACON_DMAON          0x00000003
-#define IFX_SSC_DMACON_DMAOFF         0x00000000
-#define IFX_SSC_DMACON_CLASS_MASK     0x0000000C
-#define IFX_SSC_DMACON_CLASS_OFFSET   2
-
-/* register access macros */ 
-#define ifx_ssc_fstat_received_words(status)    (status & 0x003F)
-#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
-
-#define ifx_ssc_change_status(data, addr)  WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
-#define ifx_ssc_set_config(data, addr)     WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_config(addr)           READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_status(addr)           READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
-#define ifx_ssc_receive(addr)              READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
-#define ifx_ssc_transmit(data, addr)       WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
-#define ifx_ssc_fifo_status(addr)          READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
-#define ifx_ssc_set_baudrate(data, addr)   WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
-
-#define ifx_ssc_extract_rx_fifo_size(id)   ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
-#define ifx_ssc_extract_tx_fifo_size(id)   ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
-
-#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/irq.h b/target/linux/amazon/files/include/asm-mips/amazon/irq.h
deleted file mode 100644 (file)
index c575dd6..0000000
+++ /dev/null
@@ -1,200 +0,0 @@
-/* irq.h - AMAZON interrupts */
-
-#ifndef __AMAZON_IRQ
-#define __AMAZON_IRQ
-
-/************************************************************************
- *  Interrupt information
-*************************************************************************/
-
-/* these vectors are to handle the interrupts from the internal AMAZON
-   interrupt controller. THe INT_NUM values are really just indices into
-   an array and are set up so that we can use the INT_NUM as a shift
-   to calculate a mask value. */
-#define INT_NUM_IRQ0           8
-#define INT_NUM_IM0_IRL0       (INT_NUM_IRQ0 + 0) 
-#define INT_NUM_IM0_IRL1       (INT_NUM_IRQ0 + 1) 
-#define INT_NUM_IM0_IRL2       (INT_NUM_IRQ0 + 2) 
-#define INT_NUM_IM0_IRL3       (INT_NUM_IRQ0 + 3) 
-#define INT_NUM_IM0_IRL4       (INT_NUM_IRQ0 + 4) 
-#define INT_NUM_IM0_IRL5       (INT_NUM_IRQ0 + 5) 
-#define INT_NUM_IM0_IRL6       (INT_NUM_IRQ0 + 6) 
-#define INT_NUM_IM0_IRL7       (INT_NUM_IRQ0 + 7) 
-#define INT_NUM_IM0_IRL8       (INT_NUM_IRQ0 + 8) 
-#define INT_NUM_IM0_IRL9       (INT_NUM_IRQ0 + 9) 
-#define INT_NUM_IM0_IRL10      (INT_NUM_IRQ0 + 10) 
-#define INT_NUM_IM0_IRL11      (INT_NUM_IRQ0 + 11) 
-#define INT_NUM_IM0_IRL12      (INT_NUM_IRQ0 + 12) 
-#define INT_NUM_IM0_IRL13      (INT_NUM_IRQ0 + 13) 
-#define INT_NUM_IM0_IRL14      (INT_NUM_IRQ0 + 14) 
-#define INT_NUM_IM0_IRL15      (INT_NUM_IRQ0 + 15) 
-#define INT_NUM_IM0_IRL16      (INT_NUM_IRQ0 + 16) 
-#define INT_NUM_IM0_IRL17      (INT_NUM_IRQ0 + 17) 
-#define INT_NUM_IM0_IRL18      (INT_NUM_IRQ0 + 18) 
-#define INT_NUM_IM0_IRL19      (INT_NUM_IRQ0 + 19) 
-#define INT_NUM_IM0_IRL20      (INT_NUM_IRQ0 + 20) 
-#define INT_NUM_IM0_IRL21      (INT_NUM_IRQ0 + 21) 
-#define INT_NUM_IM0_IRL22      (INT_NUM_IRQ0 + 22) 
-#define INT_NUM_IM0_IRL23      (INT_NUM_IRQ0 + 23) 
-#define INT_NUM_IM0_IRL24      (INT_NUM_IRQ0 + 24) 
-#define INT_NUM_IM0_IRL25      (INT_NUM_IRQ0 + 25) 
-#define INT_NUM_IM0_IRL26      (INT_NUM_IRQ0 + 26) 
-#define INT_NUM_IM0_IRL27      (INT_NUM_IRQ0 + 27) 
-#define INT_NUM_IM0_IRL28      (INT_NUM_IRQ0 + 28) 
-#define INT_NUM_IM0_IRL29      (INT_NUM_IRQ0 + 29) 
-#define INT_NUM_IM0_IRL30      (INT_NUM_IRQ0 + 30) 
-#define INT_NUM_IM0_IRL31      (INT_NUM_IRQ0 + 31) 
-
-#define INT_NUM_IM1_IRL0       (INT_NUM_IRQ0 + 32) 
-#define INT_NUM_IM1_IRL1       (INT_NUM_IM1_IRL0 + 1) 
-#define INT_NUM_IM1_IRL2       (INT_NUM_IM1_IRL0 + 2) 
-#define INT_NUM_IM1_IRL3       (INT_NUM_IM1_IRL0 + 3) 
-#define INT_NUM_IM1_IRL4       (INT_NUM_IM1_IRL0 + 4) 
-#define INT_NUM_IM1_IRL5       (INT_NUM_IM1_IRL0 + 5) 
-#define INT_NUM_IM1_IRL6       (INT_NUM_IM1_IRL0 + 6) 
-#define INT_NUM_IM1_IRL7       (INT_NUM_IM1_IRL0 + 7) 
-#define INT_NUM_IM1_IRL8       (INT_NUM_IM1_IRL0 + 8) 
-#define INT_NUM_IM1_IRL9       (INT_NUM_IM1_IRL0 + 9) 
-#define INT_NUM_IM1_IRL10      (INT_NUM_IM1_IRL0 + 10) 
-#define INT_NUM_IM1_IRL11      (INT_NUM_IM1_IRL0 + 11) 
-#define INT_NUM_IM1_IRL12      (INT_NUM_IM1_IRL0 + 12) 
-#define INT_NUM_IM1_IRL13      (INT_NUM_IM1_IRL0 + 13) 
-#define INT_NUM_IM1_IRL14      (INT_NUM_IM1_IRL0 + 14) 
-#define INT_NUM_IM1_IRL15      (INT_NUM_IM1_IRL0 + 15) 
-#define INT_NUM_IM1_IRL16       (INT_NUM_IM1_IRL0 + 16) 
-#define INT_NUM_IM1_IRL17      (INT_NUM_IM1_IRL0 + 17) 
-#define INT_NUM_IM1_IRL18      (INT_NUM_IM1_IRL0 + 18) 
-#define INT_NUM_IM1_IRL19      (INT_NUM_IM1_IRL0 + 19) 
-#define INT_NUM_IM1_IRL20      (INT_NUM_IM1_IRL0 + 20) 
-#define INT_NUM_IM1_IRL21      (INT_NUM_IM1_IRL0 + 21) 
-#define INT_NUM_IM1_IRL22      (INT_NUM_IM1_IRL0 + 22) 
-#define INT_NUM_IM1_IRL23      (INT_NUM_IM1_IRL0 + 23) 
-#define INT_NUM_IM1_IRL24      (INT_NUM_IM1_IRL0 + 24) 
-#define INT_NUM_IM1_IRL25      (INT_NUM_IM1_IRL0 + 25) 
-#define INT_NUM_IM1_IRL26      (INT_NUM_IM1_IRL0 + 26) 
-#define INT_NUM_IM1_IRL27      (INT_NUM_IM1_IRL0 + 27) 
-#define INT_NUM_IM1_IRL28      (INT_NUM_IM1_IRL0 + 28) 
-#define INT_NUM_IM1_IRL29      (INT_NUM_IM1_IRL0 + 29) 
-#define INT_NUM_IM1_IRL30      (INT_NUM_IM1_IRL0 + 30) 
-#define INT_NUM_IM1_IRL31      (INT_NUM_IM1_IRL0 + 31) 
-
-#define INT_NUM_IM2_IRL0       (INT_NUM_IRQ0 + 64) 
-#define INT_NUM_IM2_IRL1       (INT_NUM_IM2_IRL0 + 1) 
-#define INT_NUM_IM2_IRL2       (INT_NUM_IM2_IRL0 + 2) 
-#define INT_NUM_IM2_IRL3       (INT_NUM_IM2_IRL0 + 3) 
-#define INT_NUM_IM2_IRL4       (INT_NUM_IM2_IRL0 + 4) 
-#define INT_NUM_IM2_IRL5       (INT_NUM_IM2_IRL0 + 5) 
-#define INT_NUM_IM2_IRL6       (INT_NUM_IM2_IRL0 + 6) 
-#define INT_NUM_IM2_IRL7       (INT_NUM_IM2_IRL0 + 7) 
-#define INT_NUM_IM2_IRL8       (INT_NUM_IM2_IRL0 + 8) 
-#define INT_NUM_IM2_IRL9       (INT_NUM_IM2_IRL0 + 9) 
-#define INT_NUM_IM2_IRL10      (INT_NUM_IM2_IRL0 + 10) 
-#define INT_NUM_IM2_IRL11      (INT_NUM_IM2_IRL0 + 11) 
-#define INT_NUM_IM2_IRL12      (INT_NUM_IM2_IRL0 + 12) 
-#define INT_NUM_IM2_IRL13      (INT_NUM_IM2_IRL0 + 13) 
-#define INT_NUM_IM2_IRL14      (INT_NUM_IM2_IRL0 + 14) 
-#define INT_NUM_IM2_IRL15      (INT_NUM_IM2_IRL0 + 15) 
-#define INT_NUM_IM2_IRL16      (INT_NUM_IM2_IRL0 + 16) 
-#define INT_NUM_IM2_IRL17      (INT_NUM_IM2_IRL0 + 17) 
-#define INT_NUM_IM2_IRL18      (INT_NUM_IM2_IRL0 + 18) 
-#define INT_NUM_IM2_IRL19      (INT_NUM_IM2_IRL0 + 19) 
-#define INT_NUM_IM2_IRL20      (INT_NUM_IM2_IRL0 + 20) 
-#define INT_NUM_IM2_IRL21      (INT_NUM_IM2_IRL0 + 21) 
-#define INT_NUM_IM2_IRL22      (INT_NUM_IM2_IRL0 + 22) 
-#define INT_NUM_IM2_IRL23      (INT_NUM_IM2_IRL0 + 23) 
-#define INT_NUM_IM2_IRL24      (INT_NUM_IM2_IRL0 + 24) 
-#define INT_NUM_IM2_IRL25      (INT_NUM_IM2_IRL0 + 25) 
-#define INT_NUM_IM2_IRL26      (INT_NUM_IM2_IRL0 + 26) 
-#define INT_NUM_IM2_IRL27      (INT_NUM_IM2_IRL0 + 27) 
-#define INT_NUM_IM2_IRL28      (INT_NUM_IM2_IRL0 + 28) 
-#define INT_NUM_IM2_IRL29      (INT_NUM_IM2_IRL0 + 29) 
-#define INT_NUM_IM2_IRL30      (INT_NUM_IM2_IRL0 + 30) 
-#define INT_NUM_IM2_IRL31      (INT_NUM_IM2_IRL0 + 31) 
-
-#define INT_NUM_IM3_IRL0       (INT_NUM_IRQ0 + 96) 
-#define INT_NUM_IM3_IRL1       (INT_NUM_IM3_IRL0 + 1) 
-#define INT_NUM_IM3_IRL2       (INT_NUM_IM3_IRL0 + 2) 
-#define INT_NUM_IM3_IRL3       (INT_NUM_IM3_IRL0 + 3) 
-#define INT_NUM_IM3_IRL4       (INT_NUM_IM3_IRL0 + 4) 
-#define INT_NUM_IM3_IRL5       (INT_NUM_IM3_IRL0 + 5) 
-#define INT_NUM_IM3_IRL6       (INT_NUM_IM3_IRL0 + 6) 
-#define INT_NUM_IM3_IRL7       (INT_NUM_IM3_IRL0 + 7) 
-#define INT_NUM_IM3_IRL8       (INT_NUM_IM3_IRL0 + 8) 
-#define INT_NUM_IM3_IRL9       (INT_NUM_IM3_IRL0 + 9) 
-#define INT_NUM_IM3_IRL10      (INT_NUM_IM3_IRL0 + 10) 
-#define INT_NUM_IM3_IRL11      (INT_NUM_IM3_IRL0 + 11) 
-#define INT_NUM_IM3_IRL12      (INT_NUM_IM3_IRL0 + 12) 
-#define INT_NUM_IM3_IRL13      (INT_NUM_IM3_IRL0 + 13) 
-#define INT_NUM_IM3_IRL14      (INT_NUM_IM3_IRL0 + 14) 
-#define INT_NUM_IM3_IRL15      (INT_NUM_IM3_IRL0 + 15) 
-#define INT_NUM_IM3_IRL16      (INT_NUM_IM3_IRL0 + 16) 
-#define INT_NUM_IM3_IRL17      (INT_NUM_IM3_IRL0 + 17) 
-#define INT_NUM_IM3_IRL18      (INT_NUM_IM3_IRL0 + 18) 
-#define INT_NUM_IM3_IRL19      (INT_NUM_IM3_IRL0 + 19) 
-#define INT_NUM_IM3_IRL20      (INT_NUM_IM3_IRL0 + 20) 
-#define INT_NUM_IM3_IRL21      (INT_NUM_IM3_IRL0 + 21) 
-#define INT_NUM_IM3_IRL22      (INT_NUM_IM3_IRL0 + 22) 
-#define INT_NUM_IM3_IRL23      (INT_NUM_IM3_IRL0 + 23) 
-#define INT_NUM_IM3_IRL24      (INT_NUM_IM3_IRL0 + 24) 
-#define INT_NUM_IM3_IRL25      (INT_NUM_IM3_IRL0 + 25) 
-#define INT_NUM_IM3_IRL26      (INT_NUM_IM3_IRL0 + 26) 
-#define INT_NUM_IM3_IRL27      (INT_NUM_IM3_IRL0 + 27) 
-#define INT_NUM_IM3_IRL28      (INT_NUM_IM3_IRL0 + 28) 
-#define INT_NUM_IM3_IRL29      (INT_NUM_IM3_IRL0 + 29) 
-#define INT_NUM_IM3_IRL30      (INT_NUM_IM3_IRL0 + 30) 
-#define INT_NUM_IM3_IRL31      (INT_NUM_IM3_IRL0 + 31) 
-
-#define INT_NUM_IM4_IRL0       (INT_NUM_IRQ0 + 128) 
-#define INT_NUM_IM4_IRL1       (INT_NUM_IM4_IRL0 + 1) 
-#define INT_NUM_IM4_IRL2       (INT_NUM_IM4_IRL0 + 2) 
-#define INT_NUM_IM4_IRL3       (INT_NUM_IM4_IRL0 + 3) 
-#define INT_NUM_IM4_IRL4       (INT_NUM_IM4_IRL0 + 4) 
-#define INT_NUM_IM4_IRL5       (INT_NUM_IM4_IRL0 + 5) 
-#define INT_NUM_IM4_IRL6       (INT_NUM_IM4_IRL0 + 6) 
-#define INT_NUM_IM4_IRL7       (INT_NUM_IM4_IRL0 + 7) 
-#define INT_NUM_IM4_IRL8       (INT_NUM_IM4_IRL0 + 8) 
-#define INT_NUM_IM4_IRL9       (INT_NUM_IM4_IRL0 + 9) 
-#define INT_NUM_IM4_IRL10      (INT_NUM_IM4_IRL0 + 10) 
-#define INT_NUM_IM4_IRL11      (INT_NUM_IM4_IRL0 + 11) 
-#define INT_NUM_IM4_IRL12      (INT_NUM_IM4_IRL0 + 12) 
-#define INT_NUM_IM4_IRL13      (INT_NUM_IM4_IRL0 + 13) 
-#define INT_NUM_IM4_IRL14      (INT_NUM_IM4_IRL0 + 14) 
-#define INT_NUM_IM4_IRL15      (INT_NUM_IM4_IRL0 + 15) 
-#define INT_NUM_IM4_IRL16      (INT_NUM_IM4_IRL0 + 16) 
-#define INT_NUM_IM4_IRL17      (INT_NUM_IM4_IRL0 + 17) 
-#define INT_NUM_IM4_IRL18      (INT_NUM_IM4_IRL0 + 18) 
-#define INT_NUM_IM4_IRL19      (INT_NUM_IM4_IRL0 + 19) 
-#define INT_NUM_IM4_IRL20      (INT_NUM_IM4_IRL0 + 20) 
-#define INT_NUM_IM4_IRL21      (INT_NUM_IM4_IRL0 + 21) 
-#define INT_NUM_IM4_IRL22      (INT_NUM_IM4_IRL0 + 22) 
-#define INT_NUM_IM4_IRL23      (INT_NUM_IM4_IRL0 + 23) 
-#define INT_NUM_IM4_IRL24      (INT_NUM_IM4_IRL0 + 24) 
-#define INT_NUM_IM4_IRL25      (INT_NUM_IM4_IRL0 + 25) 
-#define INT_NUM_IM4_IRL26      (INT_NUM_IM4_IRL0 + 26) 
-#define INT_NUM_IM4_IRL27      (INT_NUM_IM4_IRL0 + 27) 
-#define INT_NUM_IM4_IRL28      (INT_NUM_IM4_IRL0 + 28) 
-#define INT_NUM_IM4_IRL29      (INT_NUM_IM4_IRL0 + 29) 
-#define INT_NUM_IM4_IRL30      (INT_NUM_IM4_IRL0 + 30) 
-#define INT_NUM_IM4_IRL31      (INT_NUM_IM4_IRL0 + 31) 
-
-/****** Interrupt Assigments ***********/
-#define AMAZON_DMA_INT         INT_NUM_IM0_IRL0
-#define IFX_SSC_TIR            INT_NUM_IM0_IRL29
-#define IFX_SSC_RIR            INT_NUM_IM0_IRL30
-#define IFX_SSC_EIR            INT_NUM_IM0_IRL31
-
-#define        AMAZON_MEI_INT          INT_NUM_IM2_IRL8
-
-#define AMAZONASC_TIR          INT_NUM_IM4_IRL15/* TX interrupt */
-#define AMAZONASC_RIR          INT_NUM_IM4_IRL16/* RX interrupt */
-#define AMAZONASC_EIR          INT_NUM_IM4_IRL17/* ERROR interrupt */
-
-#define AMAZON_TIMER6_INT      INT_NUM_IM1_IRL23
-
-#define        AMAZON_SWIE_INT         INT_NUM_IM3_IRL8
-#define        AMAZON_CBM_INT          INT_NUM_IM3_IRL9
-#define        AMAZON_AAL5_INT         INT_NUM_IM3_IRL10
-#define        AMAZON_HTU_INT          INT_NUM_IM3_IRL11
-#define        AMAZON_QSB_INT          INT_NUM_IM3_IRL12
-#define MIPS_CPU_TIMER_IRQ     7
-#endif /* __AMAZON_IRQ */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/model.h b/target/linux/amazon/files/include/asm-mips/amazon/model.h
deleted file mode 100644 (file)
index 4e43ab5..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef AMAZON_MODEL_H
-#define AMAZON_MODEL_H
-/******************************************************************************
-       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
-
-                               No Warranty
-   Because the program is licensed free of charge, there is no warranty for
-   the program, to the extent permitted by applicable law.  Except when
-   otherwise stated in writing the copyright holders and/or other parties
-   provide the program "as is" without warranty of any kind, either
-   expressed or implied, including, but not limited to, the implied
-   warranties of merchantability and fitness for a particular purpose. The
-   entire risk as to the quality and performance of the program is with
-   you.  should the program prove defective, you assume the cost of all
-   necessary servicing, repair or correction.
-
-   In no event unless required by applicable law or agreed to in writing
-   will any copyright holder, or any other party who may modify and/or
-   redistribute the program as permitted above, be liable to you for
-   damages, including any general, special, incidental or consequential
-   damages arising out of the use or inability to use the program
-   (including but not limited to loss of data or data being rendered
-   inaccurate or losses sustained by you or third parties or a failure of
-   the program to operate with any other programs), even if such holder or
-   other party has been advised of the possibility of such damages.
-******************************************************************************/
-#define BOARD_SYSTEM_TYPE              "AMAZON"
-#define SYSTEM_MODEL_NAME              "Amazon Gateway Package 3.2 Version"
-#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/port.h b/target/linux/amazon/files/include/asm-mips/amazon/port.h
deleted file mode 100644 (file)
index 2182579..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * port.h
- *
- * Global Amazon port driver header file
- *
- */
-
-/* Modification history */
-/* 21Jun2004   btxu    Generate from Inca_IP project */
-
-#ifndef PORT_H
-#define PORT_H
-
-struct amazon_port_ioctl_parm {
-       int port;
-       int pin;
-       int value;
-};
-#define AMAZON_PORT_IOC_MAGIC  0xbf
-#define AMAZON_PORT_IOCOD      _IOW( AMAZON_PORT_IOC_MAGIC,0,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCPUDSEL  _IOW( AMAZON_PORT_IOC_MAGIC,1,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCPUDEN   _IOW( AMAZON_PORT_IOC_MAGIC,2,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCSTOFF   _IOW( AMAZON_PORT_IOC_MAGIC,3,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCDIR     _IOW( AMAZON_PORT_IOC_MAGIC,4,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCOUTPUT  _IOW( AMAZON_PORT_IOC_MAGIC,5,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCINPUT   _IOWR(AMAZON_PORT_IOC_MAGIC,6,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCALTSEL0  _IOW( AMAZON_PORT_IOC_MAGIC,7,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCALTSEL1  _IOW( AMAZON_PORT_IOC_MAGIC,8,struct amazon_port_ioctl_parm)
-
-int amazon_port_reserve_pin(int port, int pin, int module_id);
-int amazon_port_free_pin(int port, int pin, int module_id);
-int amazon_port_set_open_drain(int port, int pin, int module_id);
-int amazon_port_clear_open_drain(int port, int pin, int module_id);
-int amazon_port_set_pudsel(int port, int pin, int module_id);
-int amazon_port_clear_pudsel(int port, int pin, int module_id);
-int amazon_port_set_puden(int port, int pin, int module_id);
-int amazon_port_clear_puden(int port, int pin, int module_id);
-int amazon_port_set_stoff(int port, int pin, int module_id);
-int amazon_port_clear_stoff(int port, int pin, int module_id);
-int amazon_port_set_dir_out(int port, int pin, int module_id);
-int amazon_port_set_dir_in(int port, int pin, int module_id);
-int amazon_port_set_output(int port, int pin, int module_id);
-int amazon_port_clear_output(int port, int pin, int module_id);
-int amazon_port_get_input(int port, int pin, int module_id);
-
-int amazon_port_set_altsel0(int port, int pin, int module_id);
-int amazon_port_clear_altsel0(int port, int pin, int module_id);
-int amazon_port_set_altsel1(int port, int pin, int module_id);
-int amazon_port_clear_altsel1(int port, int pin, int module_id);
-
-
-#endif /* PORT_H */
-
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/serial.h b/target/linux/amazon/files/include/asm-mips/amazon/serial.h
deleted file mode 100644 (file)
index 3ff3efc..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-/* incaAscSio.h - (AMAZON) ASC UART tty driver header */
-
-#ifndef __AMAZON_ASC_H
-#define __AMAZON_ASC_H
-
-/* channel operating modes */
-#define        ASCOPT_CSIZE    0x00000003
-#define        ASCOPT_CS7      0x00000001
-#define        ASCOPT_CS8      0x00000002
-#define        ASCOPT_PARENB   0x00000004
-#define        ASCOPT_STOPB    0x00000008
-#define        ASCOPT_PARODD   0x00000010
-#define        ASCOPT_CREAD    0x00000020
-
-#define ASC_OPTIONS            (ASCOPT_CREAD | ASCOPT_CS8)
-
-/* ASC input select (0 or 1) */
-#define CONSOLE_TTY    0
-
-/* use fractional divider for baudrate settings */
-#define AMAZONASC_USE_FDV
-
-#ifdef AMAZONASC_USE_FDV
-   #define AMAZONASC_FDV_LOW_BAUDRATE        71
-#ifdef CONFIG_USE_IKOS
-   #define AMAZONASC_FDV_HIGH_BAUDRATE       443      
-#else
-   #define AMAZONASC_FDV_HIGH_BAUDRATE       498      
-#endif //CONFIG_USE_IKOS
-#endif /*AMAZONASC_USE_FDV*/
-
-
-#define AMAZONASC_TXFIFO_FL       1
-#define AMAZONASC_RXFIFO_FL       1
-#define AMAZONASC_TXFIFO_FULL     16
-
-/* interrupt lines masks for the ASC device interrupts*/
-/* change these macroses if it's necessary */
-#define AMAZONASC_IRQ_LINE_ALL        0x000F0000  /* all IRQs */
-
-#define AMAZONASC_IRQ_LINE_TIR            0x00010000      /* TIR - Tx */
-#define AMAZONASC_IRQ_LINE_RIR            0x00020000      /* RIR - Rx */
-#define AMAZONASC_IRQ_LINE_EIR            0x00040000      /* EIR - Err */
-#define AMAZONASC_IRQ_LINE_TBIR           0x00080000      /* TBIR - Tx Buf*/
-
-/* CLC register's bits and bitfields */
-#define ASCCLC_DISR        0x00000001
-#define ASCCLC_DISS        0x00000002
-#define ASCCLC_RMCMASK     0x0000FF00
-#define ASCCLC_RMCOFFSET   8
-
-/* CON register's bits and bitfields */
-#define ASCCON_MODEMASK 0x0007
-    #define ASCCON_M_8SYNC          0x0
-    #define ASCCON_M_8ASYNC         0x1
-    #define ASCCON_M_8IRDAASYNC     0x2
-    #define ASCCON_M_7ASYNCPAR      0x3
-    #define ASCCON_M_9ASYNC         0x4
-    #define ASCCON_M_8WAKEUPASYNC   0x5
-    #define ASCCON_M_8ASYNCPAR      0x7
-#define ASCCON_STP      0x0008
-#define ASCCON_REN      0x0010
-#define ASCCON_PEN      0x0020
-#define ASCCON_FEN      0x0040
-#define ASCCON_OEN      0x0080
-#define ASCCON_PE       0x0100
-#define ASCCON_FE       0x0200
-#define ASCCON_OE       0x0400
-#define ASCCON_FDE      0x0800
-#define ASCCON_ODD      0x1000
-#define ASCCON_BRS      0x2000
-#define ASCCON_LB       0x4000
-#define ASCCON_R        0x8000
-#define ASCCON_ANY     (ASCCON_PE|ASCCON_FE|ASCCON_OE)
-
-/* WHBCON register's bits and bitfields */
-#define ASCWHBCON_CLRREN    0x0010
-#define ASCWHBCON_SETREN    0x0020
-#define ASCWHBCON_CLRPE     0x0100
-#define ASCWHBCON_CLRFE     0x0200
-#define ASCWHBCON_CLROE     0x0400
-#define ASCWHBCON_SETPE     0x0800
-#define ASCWHBCON_SETFE     0x1000
-#define ASCWHBCON_SETOE     0x2000
-
-/* ABCON register's bits and bitfields */
-#define ASCABCON_ABEN       0x0001
-#define ASCABCON_AUREN      0x0002
-#define ASCABCON_ABSTEN     0x0004
-#define ASCABCON_ABDETEN    0x0008
-#define ASCABCON_FCDETEN    0x0010
-#define ASCABCON_EMMASK     0x0300
-    #define ASCABCON_EMOFF          8
-        #define ASCABCON_EM_DISAB       0x0
-        #define ASCABCON_EM_DURAB       0x1
-        #define ASCABCON_EM_ALWAYS      0x2
-#define ASCABCON_TXINV      0x0400
-#define ASCABCON_RXINV      0x0800
-
-/* FDV register mask, offset and bitfields*/
-#define ASCFDV_VALUE_MASK     0x000001FF
-
-/* WHBABCON register's bits and bitfields */
-#define ASCWHBABCON_SETABEN     0x0001
-#define ASCWHBABCON_CLRABEN     0x0002
-
-/* ABSTAT register's bits and bitfields */
-#define ASCABSTAT_FCSDET    0x0001
-#define ASCABSTAT_FCCDET    0x0002
-#define ASCABSTAT_SCSDET    0x0004
-#define ASCABSTAT_SCCDET    0x0008
-#define ASCABSTAT_DETWAIT   0x0010
-
-/* WHBABSTAT register's bits and bitfields */
-#define ASCWHBABSTAT_CLRFCSDET  0x0001
-#define ASCWHBABSTAT_SETFCSDET  0x0002
-#define ASCWHBABSTAT_CLRFCCDET  0x0004
-#define ASCWHBABSTAT_SETFCCDET  0x0008
-#define ASCWHBABSTAT_CLRSCSDET  0x0010
-#define ASCWHBABSTAT_SETSCSDET  0x0020
-#define ASCWHBABSTAT_SETSCCDET  0x0040
-#define ASCWHBABSTAT_CLRSCCDET  0x0080
-#define ASCWHBABSTAT_CLRDETWAIT 0x0100
-#define ASCWHBABSTAT_SETDETWAIT 0x0200
-
-/* TXFCON register's bits and bitfields */
-#define ASCTXFCON_TXFEN         0x0001
-#define ASCTXFCON_TXFFLU        0x0002
-#define ASCTXFCON_TXTMEN        0x0004
-#define ASCTXFCON_TXFITLMASK    0x3F00
-#define ASCTXFCON_TXFITLOFF     8
-
-/* RXFCON register's bits and bitfields */
-#define ASCRXFCON_RXFEN         0x0001
-#define ASCRXFCON_RXFFLU        0x0002
-#define ASCRXFCON_RXTMEN        0x0004
-#define ASCRXFCON_RXFITLMASK    0x3F00
-#define ASCRXFCON_RXFITLOFF     8
-
-/* FSTAT register's bits and bitfields */
-#define ASCFSTAT_RXFFLMASK      0x003F
-#define ASCFSTAT_TXFFLMASK      0x3F00
-#define ASCFSTAT_TXFFLOFF       8
-
-#endif /* __AMAZON_ASC_H */
-
diff --git a/target/linux/amazon/image/Makefile b/target/linux/amazon/image/Makefile
deleted file mode 100644 (file)
index 08f3ba5..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-# 
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-define Image/BuildKernel
-       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma
-       mkimage -A mips -O linux -T kernel -C lzma -a 0x80002000 -e \
-               0x80002000 \
-               -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-               -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage
-
-       cp $(KDIR)/uImage $(BIN_DIR)/$(IMG_PREFIX)-uImage
-endef
-
-define Image/Build/squashfs
-    $(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(1).image)
-endef
-
-define Image/Build
-       cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).image
-       $(call Image/Build/$(1),$(1))
-endef
-
-
-$(eval $(call BuildImage))
diff --git a/target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch b/target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch
deleted file mode 100644 (file)
index 0aa3778..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1593,7 +1593,16 @@ void __cpuinit per_cpu_trap_init(void)
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
-               cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+              if (!cp0_compare_irq)
-+                      cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
-               cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
-+              if (!cp0_perfcount_irq)
-+                      cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+              if (arch_fixup_c0_irqs)
-+                      arch_fixup_c0_irqs();
-+
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;
-       } else {
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -139,9 +139,11 @@ extern void free_irqno(unsigned int irq)
-  * IE7.  Since R2 their number has to be read from the c0_intctl register.
-  */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
- extern int cp0_compare_irq;
- extern int cp0_compare_irq_shift;
- extern int cp0_perfcount_irq;
-+extern void __weak arch_fixup_c0_irqs(void);
- #endif /* _ASM_IRQ_H */
diff --git a/target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch b/target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch
deleted file mode 100644 (file)
index 7078b37..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -23,6 +23,22 @@
- #ifndef CONFIG_MIPS_MT_SMTC
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register.  4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+      do { \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+      } while (0)
-+
- static int mips_next_event(unsigned long delta,
-                            struct clock_event_device *evt)
- {
-@@ -32,6 +48,7 @@ static int mips_next_event(unsigned long
-       cnt = read_c0_count();
-       cnt += delta;
-       write_c0_compare(cnt);
-+      compare_change_hazard();
-       res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
-       return res;
- }
diff --git a/target/linux/amazon/patches-3.3/017-wdt-driver.patch b/target/linux/amazon/patches-3.3/017-wdt-driver.patch
deleted file mode 100644 (file)
index 005ee71..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
-+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
- # PARISC Architecture
diff --git a/target/linux/amazon/patches-3.3/100-board.patch b/target/linux/amazon/patches-3.3/100-board.patch
deleted file mode 100644 (file)
index b743052..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -120,6 +120,22 @@ config BCM63XX
-       help
-        Support for BCM63XX based boards
-+config AMAZON
-+      bool "Amazon support (EXPERIMENTAL)"
-+      depends on EXPERIMENTAL
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_CPU_MIPS32_R2
-+      select HAVE_STD_PC_SERIAL_PORT
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select SYS_HAS_EARLY_PRINTK
-+      select HW_HAS_PCI
-+      select SWAP_IO_SPACE
-+
- config MIPS_COBALT
-       bool "Cobalt Server"
-       select CEVT_R4K
-@@ -813,6 +829,7 @@ config NLM_XLP_BOARD
- endchoice
-+source "arch/mips/amazon/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -6,6 +6,7 @@ platforms += ath79
- platforms += bcm47xx
- platforms += bcm63xx
- platforms += cavium-octeon
-+platforms += amazon
- platforms += cobalt
- platforms += dec
- platforms += emma
---- /dev/null
-+++ b/arch/mips/amazon/Platform
-@@ -0,0 +1,7 @@
-+#
-+# Infineon AMAZON boards
-+#
-+platform-$(CONFIG_AMAZON)     += amazon/
-+cflags-$(CONFIG_AMAZON)       +=                                      \
-+              -I$(srctree)/arch/mips/include/asm/mach-amazon
-+load-$(CONFIG_AMAZON)         := 0xffffffff80002000
diff --git a/target/linux/amazon/patches-3.3/130-mtd_drivers.patch b/target/linux/amazon/patches-3.3/130-mtd_drivers.patch
deleted file mode 100644 (file)
index 6ce28e3..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -57,3 +57,4 @@ obj-$(CONFIG_MTD_VMU)                += vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR)   += gpio-addr-flash.o
- obj-$(CONFIG_MTD_LATCH_ADDR)  += latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ)      += lantiq-flash.o
-+obj-$(CONFIG_AMAZON_MTD)      += amazon.o
diff --git a/target/linux/amazon/patches-3.3/140-net_drivers.patch b/target/linux/amazon/patches-3.3/140-net_drivers.patch
deleted file mode 100644 (file)
index 9c840e6..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -74,3 +74,6 @@ obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundr
- obj-$(CONFIG_NET_VENDOR_VIA) += via/
- obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
- obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
-+
-+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
-+obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o
diff --git a/target/linux/amazon/patches-3.3/150-serial_driver.patch b/target/linux/amazon/patches-3.3/150-serial_driver.patch
deleted file mode 100644 (file)
index c6e7f39..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
---- a/drivers/tty/serial/Makefile
-+++ b/drivers/tty/serial/Makefile
-@@ -78,3 +78,4 @@ obj-$(CONFIG_SERIAL_LANTIQ)  += lantiq.o
- obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
- obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
- obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
-+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
diff --git a/target/linux/amazon/patches-3.3/160-cfi-swap.patch b/target/linux/amazon/patches-3.3/160-cfi-swap.patch
deleted file mode 100644 (file)
index 4a0009e..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1152,6 +1152,9 @@ static int __xipram do_write_oneword(str
-       int retry_cnt = 0;
-       adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-       mutex_lock(&chip->mutex);
-       ret = get_chip(map, chip, adr, FL_WRITING);
-@@ -1420,7 +1423,11 @@ static int __xipram do_write_buffer(stru
-       z = 0;
-       while(z < words * map_bankwidth(map)) {
-               datum = map_word_load(map, buf);
-+#ifdef CONFIG_AMAZON
-+              map_write(map, datum, (adr + z) ^ 0x2);
-+#else
-               map_write(map, datum, adr + z);
-+#endif
-               z += map_bankwidth(map);
-               buf += map_bankwidth(map);
-@@ -1665,6 +1672,9 @@ static int __xipram do_erase_oneblock(st
-       int ret = 0;
-       adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-       mutex_lock(&chip->mutex);
-       ret = get_chip(map, chip, adr, FL_ERASING);
-@@ -1793,6 +1803,10 @@ static int do_atmel_lock(struct map_info
-       struct cfi_private *cfi = map->fldrv_priv;
-       int ret;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-+
-       mutex_lock(&chip->mutex);
-       ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
-       if (ret)
-@@ -1828,6 +1842,10 @@ static int do_atmel_unlock(struct map_in
-       struct cfi_private *cfi = map->fldrv_priv;
-       int ret;
-+#ifdef CONFIG_AMAZON
-+      adr ^= 2;
-+#endif
-+
-       mutex_lock(&chip->mutex);
-       ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING);
-       if (ret)