backport swconfig kernel support and the ip175c driver from trunk to 8.09 and enable...
authorFelix Fietkau <nbd@openwrt.org>
Mon, 24 Aug 2009 21:25:03 +0000 (21:25 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Mon, 24 Aug 2009 21:25:03 +0000 (21:25 +0000)
SVN-Revision: 17382

target/linux/atheros/config-default
target/linux/generic-2.6/config-2.6.26
target/linux/generic-2.6/files-2.6.26/drivers/net/phy/ip175c.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.26/drivers/net/phy/swconfig.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.26/include/linux/switch.h [new file with mode: 0644]
target/linux/generic-2.6/patches-2.6.26/650-swconfig.patch [new file with mode: 0644]

index ca7943f7a02a6a63e62a7bf8df0b8165518fb6e2..8ffd759ef8bb47470d75b0caa0ec0ea5210d11d5 100644 (file)
@@ -83,9 +83,9 @@ CONFIG_HW_RANDOM=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
-CONFIG_ICPLUS_PHY=y
 # CONFIG_IDE is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP175C_PHY=y
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
@@ -213,6 +213,7 @@ CONFIG_SLABINFO=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SSB_POSSIBLE=y
+CONFIG_SWCONFIG=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
index d60c7b2cf37d992960781fab0bd9726981b18a62..4ca933d4598e26c5250e5df3dad0955c72990dc2 100644 (file)
@@ -552,6 +552,7 @@ CONFIG_INPUT_EVDEV=m
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_NOOP=y
 # CONFIG_IP1000 is not set
+# CONFIG_IP175C_PHY is not set
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MANGLE=m
@@ -1541,6 +1542,7 @@ CONFIG_SUNRPC_GSS=m
 # CONFIG_SUN_PARTITION is not set
 CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
 # CONFIG_SYNCLINK_CS is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_SYSCTL=y
diff --git a/target/linux/generic-2.6/files-2.6.26/drivers/net/phy/ip175c.c b/target/linux/generic-2.6/files-2.6.26/drivers/net/phy/ip175c.c
new file mode 100644 (file)
index 0000000..b780f86
--- /dev/null
@@ -0,0 +1,1320 @@
+/*
+ * swconfig-ip175c.c: Swconfig configuration for IC+ IP175C switch
+ *
+ * Copyright (C) 2008 Patrick Horn <patrick.horn@gmail.com>
+ * Copyright (C) 2008 Martin Mares <mj@ucw.cz>
+ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.        See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/switch.h>
+
+#define MAX_VLANS 16
+#define MAX_PORTS 9
+
+typedef struct ip175c_reg {
+       u16 p;                  // phy
+       u16 m;                  // mii
+} reg;
+typedef char bitnum;
+
+#define NOTSUPPORTED {-1,-1}
+
+#define REG_SUPP(x) (((x).m != ((u16)-1)) && ((x).p != (u16)-1))
+
+/*********** CONSTANTS ***********/
+struct register_mappings {
+       char *NAME;
+       u16 MODEL_NO;                   // compare to bits 4-9 of MII register 0,3.
+       bitnum NUM_PORTS;
+       bitnum CPU_PORT;
+
+/* The default VLAN for each port.
+        Default: 0x0001 for Ports 0,1,2,3
+                 0x0002 for Ports 4,5 */
+       reg VLAN_DEFAULT_TAG_REG[MAX_PORTS];
+
+/* These ports are tagged.
+        Default: 0x00 */
+       reg ADD_TAG_REG;
+       reg REMOVE_TAG_REG;
+       bitnum ADD_TAG_BIT[MAX_PORTS];
+/* These ports are untagged.
+        Default: 0x00 (i.e. do not alter any VLAN tags...)
+        Maybe set to 0 if user disables VLANs. */
+       bitnum REMOVE_TAG_BIT[MAX_PORTS];
+
+/* Port M and Port N are on the same VLAN.
+        Default: All ports on all VLANs. */
+// Use register {29, 19+N/2}
+       reg VLAN_LOOKUP_REG;
+// Port 5 uses register {30, 18} but same as odd bits.
+       reg VLAN_LOOKUP_REG_5;          // in a different register on IP175C.
+       bitnum VLAN_LOOKUP_EVEN_BIT[MAX_PORTS];
+       bitnum VLAN_LOOKUP_ODD_BIT[MAX_PORTS];
+
+/* This VLAN corresponds to which ports.
+        Default: 0x2f,0x30,0x3f,0x3f... */
+       reg TAG_VLAN_MASK_REG;
+       bitnum TAG_VLAN_MASK_EVEN_BIT[MAX_PORTS];
+       bitnum TAG_VLAN_MASK_ODD_BIT[MAX_PORTS];
+
+       int RESET_VAL;
+       reg RESET_REG;
+
+       reg MODE_REG;
+       int MODE_VAL;
+
+/* General flags */
+       reg ROUTER_CONTROL_REG;
+       reg VLAN_CONTROL_REG;
+       bitnum TAG_VLAN_BIT;
+       bitnum ROUTER_EN_BIT;
+       bitnum NUMLAN_GROUPS_MAX;
+       bitnum NUMLAN_GROUPS_BIT;
+
+       reg MII_REGISTER_EN;
+       bitnum MII_REGISTER_EN_BIT;
+
+       // set to 1 for 178C, 0 for 175C.
+       bitnum SIMPLE_VLAN_REGISTERS;   // 175C has two vlans per register but 178C has only one.
+};
+
+static const struct register_mappings IP178C = {
+       .NAME = "IP178C",
+       .MODEL_NO = 0x18,
+       .VLAN_DEFAULT_TAG_REG = {
+               {30,3},{30,4},{30,5},{30,6},{30,7},{30,8},
+               {30,9},{30,10},{30,11},
+       },
+
+       .ADD_TAG_REG = {30,12},
+       .ADD_TAG_BIT = {0,1,2,3,4,5,6,7,8},
+       .REMOVE_TAG_REG = {30,13},
+       .REMOVE_TAG_BIT = {4,5,6,7,8,9,10,11,12},
+
+       .SIMPLE_VLAN_REGISTERS = 1,
+
+       .VLAN_LOOKUP_REG = {31,0},// +N
+       .VLAN_LOOKUP_REG_5 = NOTSUPPORTED, // not used with SIMPLE_VLAN_REGISTERS
+       .VLAN_LOOKUP_EVEN_BIT = {0,1,2,3,4,5,6,7,8},
+       .VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,5,6,7,8},
+
+       .TAG_VLAN_MASK_REG = {30,14}, // +N
+       .TAG_VLAN_MASK_EVEN_BIT = {0,1,2,3,4,5,6,7,8},
+       .TAG_VLAN_MASK_ODD_BIT = {0,1,2,3,4,5,6,7,8},
+
+       .RESET_VAL = 0x55AA,
+       .RESET_REG = {30,0},
+       .MODE_VAL = 0,
+       .MODE_REG = NOTSUPPORTED,
+
+       .ROUTER_CONTROL_REG = {30,30},
+       .ROUTER_EN_BIT = 11,
+       .NUMLAN_GROUPS_MAX = 8,
+       .NUMLAN_GROUPS_BIT = 8, // {0-2}
+
+       .VLAN_CONTROL_REG = {30,13},
+       .TAG_VLAN_BIT = 3,
+
+       .CPU_PORT = 8,
+       .NUM_PORTS = 9,
+
+       .MII_REGISTER_EN = NOTSUPPORTED,
+
+};
+
+static const struct register_mappings IP175C = {
+       .NAME = "IP175C",
+       .MODEL_NO = 0x18,
+       .VLAN_DEFAULT_TAG_REG = {
+               {29,24},{29,25},{29,26},{29,27},{29,28},{29,30},
+               NOTSUPPORTED,NOTSUPPORTED,NOTSUPPORTED
+       },
+
+       .ADD_TAG_REG = {29,23},
+       .REMOVE_TAG_REG = {29,23},
+       .ADD_TAG_BIT = {11,12,13,14,15,1,-1,-1,-1},
+       .REMOVE_TAG_BIT = {6,7,8,9,10,0,-1,-1,-1},
+
+       .SIMPLE_VLAN_REGISTERS = 0,
+
+       .VLAN_LOOKUP_REG = {29,19},// +N/2
+       .VLAN_LOOKUP_REG_5 = {30,18},
+       .VLAN_LOOKUP_EVEN_BIT = {8,9,10,11,12,15,-1,-1,-1},
+       .VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,7,-1,-1,-1},
+
+       .TAG_VLAN_MASK_REG = {30,1}, // +N/2
+       .TAG_VLAN_MASK_EVEN_BIT = {0,1,2,3,4,5,-1,-1,-1},
+       .TAG_VLAN_MASK_ODD_BIT = {8,9,10,11,12,13,-1,-1,-1},
+
+       .RESET_VAL = 0x175C,
+       .RESET_REG = {30,0},
+       .MODE_VAL = 0x175C,
+       .MODE_REG = {29,31},
+
+       .ROUTER_CONTROL_REG = {30,9},
+       .ROUTER_EN_BIT = 3,
+       .NUMLAN_GROUPS_MAX = 8,
+       .NUMLAN_GROUPS_BIT = 0, // {0-2}
+
+       .VLAN_CONTROL_REG = {30,9},
+       .TAG_VLAN_BIT = 7,
+
+       .NUM_PORTS = 6,
+       .CPU_PORT = 5,
+
+       .MII_REGISTER_EN = NOTSUPPORTED,
+
+};
+
+static const struct register_mappings IP175A = {
+       .NAME = "IP175A",
+       .MODEL_NO = 0x05,
+       .VLAN_DEFAULT_TAG_REG = {
+               {0,24},{0,25},{0,26},{0,27},{0,28},NOTSUPPORTED,
+               NOTSUPPORTED,NOTSUPPORTED,NOTSUPPORTED
+       },
+
+       .ADD_TAG_REG = {0,23},
+       .REMOVE_TAG_REG = {0,23},
+       .ADD_TAG_BIT = {11,12,13,14,15,1,-1,-1,-1},
+       .REMOVE_TAG_BIT = {6,7,8,9,10,0,-1,-1,-1},
+
+       .SIMPLE_VLAN_REGISTERS = 1,
+
+       // Only programmable via. EEPROM
+       .VLAN_LOOKUP_REG = NOTSUPPORTED,// +N/2
+       .VLAN_LOOKUP_REG_5 = NOTSUPPORTED,
+       .VLAN_LOOKUP_EVEN_BIT = {8,9,10,11,12,15,-1,-1,-1},
+       .VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,7,-1,-1,-1},
+
+       .TAG_VLAN_MASK_REG = NOTSUPPORTED, // +N/2
+       .TAG_VLAN_MASK_EVEN_BIT = {0,1,2,3,4,5,-1,-1,-1},
+       .TAG_VLAN_MASK_ODD_BIT = {8,9,10,11,12,13,-1,-1,-1},
+
+       .RESET_VAL = -1,
+       .RESET_REG = NOTSUPPORTED,
+       .MODE_VAL = 0,
+       .MODE_REG = NOTSUPPORTED,
+
+       .ROUTER_CONTROL_REG = NOTSUPPORTED,
+       .VLAN_CONTROL_REG = NOTSUPPORTED,
+       .TAG_VLAN_BIT = -1,
+       .ROUTER_EN_BIT = -1,
+       .NUMLAN_GROUPS_MAX = -1,
+       .NUMLAN_GROUPS_BIT = -1, // {0-2}
+
+       .NUM_PORTS = 6,
+       .CPU_PORT = 5,
+
+       .MII_REGISTER_EN = {0, 12},
+       .MII_REGISTER_EN_BIT = 7,
+};
+
+struct ip175c_state {
+       struct switch_dev dev;
+       struct mii_bus *mii_bus;
+       bool registered;
+
+       int router_mode;                // ROUTER_EN
+       int vlan_enabled;               // TAG_VLAN_EN
+       struct port_state {
+               u16 pvid;
+               unsigned int shareports;
+       } ports[MAX_PORTS];
+       unsigned int add_tag;
+       unsigned int remove_tag;
+       int num_vlans;
+       unsigned int vlan_ports[MAX_VLANS];
+       const struct register_mappings *regs;
+       reg proc_mii; /*!< phy/reg for the low level register access via /proc */
+
+       char buf[80];
+};
+
+static int ip_phy_read(struct mii_bus *bus, int port, int reg)
+{
+       int val;
+
+       mutex_lock(&bus->mdio_lock);
+       val = bus->read(bus, port, reg);
+       mutex_unlock(&bus->mdio_lock);
+
+       return val;
+}
+
+
+static int ip_phy_write(struct mii_bus *bus, int port, int reg, u16 val)
+{
+       int err;
+
+       mutex_lock(&bus->mdio_lock);
+       err = bus->write(bus, port, reg, val);
+       mutex_unlock(&bus->mdio_lock);
+
+       return err;
+}
+
+
+static int getPhy (struct ip175c_state *state, reg mii)
+{
+       struct mii_bus *bus = state->mii_bus;
+       int val;
+
+       if (!REG_SUPP(mii))
+               return -EFAULT;
+
+       val = ip_phy_read(bus, mii.p, mii.m);
+       if (val < 0)
+               pr_warning("IP175C: Unable to get MII register %d,%d: error %d\n", mii.p,mii.m,-val);
+
+       return val;
+}
+
+static int setPhy (struct ip175c_state *state, reg mii, u16 value)
+{
+       struct mii_bus *bus = state->mii_bus;
+       int err;
+
+       if (!REG_SUPP(mii))
+               return -EFAULT;
+
+       err = ip_phy_write(bus, mii.p, mii.m, value);
+       if (err < 0) {
+               pr_warning("IP175C: Unable to set MII register %d,%d to %d: error %d\n", mii.p,mii.m,value,-err);
+               return err;
+       }
+       mdelay(2);
+       getPhy(state, mii);
+       return 0;
+}
+
+/**
+ * These two macros are to simplify the mapping of logical bits to the bits in hardware.
+ * NOTE: these macros will return if there is an error!
+ */
+
+#define GET_PORT_BITS(state, bits, addr, bit_lookup)           \
+       do {                                                    \
+               int i, val = getPhy((state), (addr));           \
+               if (val < 0)                                    \
+                       return val;                             \
+               (bits) = 0;                                     \
+               for (i = 0; i < MAX_PORTS; i++) {               \
+                       if ((bit_lookup)[i] == -1) continue;    \
+                       if (val & (1<<(bit_lookup)[i]))         \
+                               (bits) |= (1<<i);               \
+               }                                               \
+       } while (0)
+
+#define SET_PORT_BITS(state, bits, addr, bit_lookup)           \
+       do {                                                    \
+               int i, val = getPhy((state), (addr));           \
+               if (val < 0)                                    \
+                       return val;                             \
+               for (i = 0; i < MAX_PORTS; i++) {               \
+                       unsigned int newmask = ((bits)&(1<<i)); \
+                       if ((bit_lookup)[i] == -1) continue;    \
+                       val &= ~(1<<(bit_lookup)[i]);           \
+                       val |= ((newmask>>i)<<(bit_lookup)[i]); \
+               }                                               \
+               val = setPhy((state), (addr), val);             \
+               if (val < 0)                                    \
+                       return val;                             \
+       } while (0)
+
+static int get_model(struct ip175c_state *state)
+{
+       reg oui_id_reg = {0, 2};
+       int oui_id;
+       reg model_no_reg = {0, 3};
+       int model_no, model_no_orig;
+
+       // 175 and 178 have the same oui ID.
+       reg oui_id_reg_178c = {5, 2}; // returns error on IP175C.
+       int is_178c = 0;
+
+       oui_id = getPhy(state, oui_id_reg);
+       if (oui_id != 0x0243) {
+               // non
+               return -ENODEV; // Not a IC+ chip.
+       }
+       oui_id = getPhy(state, oui_id_reg_178c);
+       if (oui_id == 0x0243) {
+               is_178c = 1;
+       }
+
+       model_no_orig = getPhy(state, model_no_reg);
+       if (model_no_orig < 0) {
+               return -ENODEV;
+       }
+       model_no = model_no_orig >> 4; // shift out revision number.
+       model_no &= 0x3f; // only take the model number (low 6 bits).
+       if (model_no == IP175A.MODEL_NO) {
+               state->regs = &IP175A;
+       } else if (model_no == IP175C.MODEL_NO) {
+               if (is_178c) {
+                       state->regs = &IP178C;
+               } else {
+                       state->regs = &IP175C;
+               }
+       } else {
+               printk(KERN_WARNING "ip175c: Found an unknown IC+ switch with model number %02Xh.\n", model_no_orig);
+               return -EPERM;
+       }
+       return 0;
+}
+
+/** Get only the vlan and router flags on the router **/
+static int get_flags(struct ip175c_state *state)
+{
+       int val;
+
+       state->router_mode = 0;
+       state->vlan_enabled = -1; // hack
+       state->num_vlans = 0;
+
+       if (!REG_SUPP(state->regs->ROUTER_CONTROL_REG)) {
+               return 0; // not an error if it doesn't support enable vlan.
+       }
+
+       val = getPhy(state, state->regs->ROUTER_CONTROL_REG);
+       if (val < 0) {
+               return val;
+       }
+       if (state->regs->ROUTER_EN_BIT >= 0)
+               state->router_mode = ((val>>state->regs->ROUTER_EN_BIT) & 1);
+
+       if (state->regs->NUMLAN_GROUPS_BIT >= 0) {
+               state->num_vlans = (val >> state->regs->NUMLAN_GROUPS_BIT);
+               state->num_vlans &= (state->regs->NUMLAN_GROUPS_MAX-1);
+               state->num_vlans+=1; // does not include WAN.
+       }
+
+
+       val = getPhy(state, state->regs->VLAN_CONTROL_REG);
+       if (val < 0) {
+               return 0;
+       }
+       if (state->regs->TAG_VLAN_BIT >= 0)
+               state->vlan_enabled = ((val>>state->regs->TAG_VLAN_BIT) & 1);
+
+       return  0;
+}
+/** Get all state variables for VLAN mappings and port-based tagging. **/
+static int get_state(struct ip175c_state *state)
+{
+       int i, j;
+       int ret;
+       ret = get_flags(state);
+       if (ret < 0) {
+               return ret;
+       }
+       GET_PORT_BITS(state, state->remove_tag,
+                                 state->regs->REMOVE_TAG_REG, state->regs->REMOVE_TAG_BIT);
+       GET_PORT_BITS(state, state->add_tag,
+                                 state->regs->ADD_TAG_REG, state->regs->ADD_TAG_BIT);
+
+       if (state->vlan_enabled == -1) {
+               // not sure how to get this...
+               state->vlan_enabled = (!state->remove_tag && !state->add_tag);
+       }
+
+       if (REG_SUPP(state->regs->VLAN_LOOKUP_REG)) {
+       for (j=0; j<MAX_PORTS; j++) {
+               state->ports[j].shareports = 0; // initialize them in case.
+       }
+       for (j=0; j<state->regs->NUM_PORTS; j++) {
+               reg addr;
+               const bitnum *bit_lookup = (j%2==0)?
+                       state->regs->VLAN_LOOKUP_EVEN_BIT:
+                       state->regs->VLAN_LOOKUP_ODD_BIT;
+               addr = state->regs->VLAN_LOOKUP_REG;
+               if (state->regs->SIMPLE_VLAN_REGISTERS) {
+                       addr.m += j;
+               } else {
+                       switch (j) {
+                       case 0:
+                       case 1:
+                               break;
+                       case 2:
+                       case 3:
+                               addr.m+=1;
+                               break;
+                       case 4:
+                               addr.m+=2;
+                               break;
+                       case 5:
+                               addr = state->regs->VLAN_LOOKUP_REG_5;
+                               break;
+                       }
+               }
+
+               if (REG_SUPP(addr)) {
+                       GET_PORT_BITS(state, state->ports[j].shareports, addr, bit_lookup);
+               }
+       }
+       } else {
+               for (j=0; j<MAX_PORTS; j++) {
+                       state->ports[j].shareports = 0xff;
+               }
+       }
+
+       for (i=0; i<MAX_PORTS; i++) {
+               if (REG_SUPP(state->regs->VLAN_DEFAULT_TAG_REG[i])) {
+                       int val = getPhy(state, state->regs->VLAN_DEFAULT_TAG_REG[i]);
+                       if (val < 0) {
+                               return val;
+                       }
+                       state->ports[i].pvid = val;
+               } else {
+                       state->ports[i].pvid = 0;
+               }
+       }
+
+       if (REG_SUPP(state->regs->TAG_VLAN_MASK_REG)) {
+               for (j=0; j<MAX_VLANS; j++) {
+                       reg addr = state->regs->TAG_VLAN_MASK_REG;
+                       const bitnum *bit_lookup = (j%2==0)?
+                               state->regs->TAG_VLAN_MASK_EVEN_BIT:
+                               state->regs->TAG_VLAN_MASK_ODD_BIT;
+                       if (state->regs->SIMPLE_VLAN_REGISTERS) {
+                               addr.m += j;
+                       } else {
+                               addr.m += j/2;
+                       }
+                       GET_PORT_BITS(state, state->vlan_ports[j], addr, bit_lookup);
+               }
+       } else {
+               for (j=0; j<MAX_VLANS; j++) {
+                       state->vlan_ports[j] = 0;
+                       for (i=0; i<state->regs->NUM_PORTS; i++) {
+                               if ((state->ports[i].pvid == j) ||
+                                               (state->ports[i].pvid == 0)) {
+                                       state->vlan_ports[j] |= (1<<i);
+                               }
+                       }
+               }
+       }
+
+       return 0;
+}
+
+
+/** Only update vlan and router flags in the switch **/
+static int update_flags(struct ip175c_state *state)
+{
+       int val;
+
+       if (!REG_SUPP(state->regs->ROUTER_CONTROL_REG)) {
+               return 0;
+       }
+
+       val = getPhy(state, state->regs->ROUTER_CONTROL_REG);
+       if (val < 0) {
+               return val;
+       }
+       if (state->regs->ROUTER_EN_BIT >= 0) {
+               if (state->router_mode) {
+                       val |= (1<<state->regs->ROUTER_EN_BIT);
+               } else {
+                       val &= (~(1<<state->regs->ROUTER_EN_BIT));
+               }
+       }
+       if (state->regs->TAG_VLAN_BIT >= 0) {
+               if (state->vlan_enabled) {
+                       val |= (1<<state->regs->TAG_VLAN_BIT);
+               } else {
+                       val &= (~(1<<state->regs->TAG_VLAN_BIT));
+               }
+       }
+       if (state->regs->NUMLAN_GROUPS_BIT >= 0) {
+               val &= (~((state->regs->NUMLAN_GROUPS_MAX-1)<<state->regs->NUMLAN_GROUPS_BIT));
+               if (state->num_vlans > state->regs->NUMLAN_GROUPS_MAX) {
+                       val |= state->regs->NUMLAN_GROUPS_MAX << state->regs->NUMLAN_GROUPS_BIT;
+               } else if (state->num_vlans >= 1) {
+                       val |= (state->num_vlans-1) << state->regs->NUMLAN_GROUPS_BIT;
+               }
+       }
+       return setPhy(state, state->regs->ROUTER_CONTROL_REG, val);
+}
+
+/** Update all VLAN and port state.  Usually you should call "correct_vlan_state" first. **/
+static int update_state(struct ip175c_state *state)
+{
+       int j;
+       int i;
+       SET_PORT_BITS(state, state->add_tag,
+                                 state->regs->ADD_TAG_REG, state->regs->ADD_TAG_BIT);
+       SET_PORT_BITS(state, state->remove_tag,
+                                 state->regs->REMOVE_TAG_REG, state->regs->REMOVE_TAG_BIT);
+
+       if (REG_SUPP(state->regs->VLAN_LOOKUP_REG)) {
+       for (j=0; j<state->regs->NUM_PORTS; j++) {
+               reg addr;
+               const bitnum *bit_lookup = (j%2==0)?
+                       state->regs->VLAN_LOOKUP_EVEN_BIT:
+                       state->regs->VLAN_LOOKUP_ODD_BIT;
+
+               // duplicate code -- sorry
+               addr = state->regs->VLAN_LOOKUP_REG;
+               if (state->regs->SIMPLE_VLAN_REGISTERS) {
+                       addr.m += j;
+               } else {
+                       switch (j) {
+                       case 0:
+                       case 1:
+                               break;
+                       case 2:
+                       case 3:
+                               addr.m+=1;
+                               break;
+                       case 4:
+                               addr.m+=2;
+                               break;
+                       case 5:
+                               addr = state->regs->VLAN_LOOKUP_REG_5;
+                               break;
+                       default:
+                               addr.m = -1; // shouldn't get here, but...
+                               break;
+                       }
+               }
+               //printf("shareports for %d is %02X\n",j,state->ports[j].shareports);
+               if (REG_SUPP(addr)) {
+                       SET_PORT_BITS(state, state->ports[j].shareports, addr, bit_lookup);
+               }
+       }
+       }
+       if (REG_SUPP(state->regs->TAG_VLAN_MASK_REG)) {
+       for (j=0; j<MAX_VLANS; j++) {
+               reg addr = state->regs->TAG_VLAN_MASK_REG;
+               const bitnum *bit_lookup = (j%2==0)?
+                       state->regs->TAG_VLAN_MASK_EVEN_BIT:
+                       state->regs->TAG_VLAN_MASK_ODD_BIT;
+               unsigned int vlan_mask;
+               if (state->regs->SIMPLE_VLAN_REGISTERS) {
+                       addr.m += j;
+               } else {
+                       addr.m += j/2;
+               }
+               vlan_mask = state->vlan_ports[j];
+               SET_PORT_BITS(state, vlan_mask, addr, bit_lookup);
+       }
+       }
+
+       for (i=0; i<MAX_PORTS; i++) {
+               if (REG_SUPP(state->regs->VLAN_DEFAULT_TAG_REG[i])) {
+                       int err = setPhy(state, state->regs->VLAN_DEFAULT_TAG_REG[i],
+                                       state->ports[i].pvid);
+                       if (err < 0) {
+                               return err;
+                       }
+               }
+       }
+
+       return update_flags(state);
+
+       // software reset: 30.0 = 0x175C
+       // wait 2ms
+       // reset ports 0,1,2,3,4
+}
+
+/*
+  Uses only the VLAN port mask and the add tag mask to generate the other fields:
+  which ports are part of the same VLAN, removing vlan tags, and VLAN tag ids.
+ */
+static void correct_vlan_state(struct ip175c_state *state)
+{
+       int i, j;
+       state->num_vlans = 0;
+       for (i=0; i<MAX_VLANS; i++) {
+               if (state->vlan_ports[i] != 0) {
+                       state->num_vlans = i+1; //hack -- we need to store the "set" vlans somewhere...
+               }
+       }
+
+
+
+       for (i=0; i<state->regs->NUM_PORTS; i++) {
+               unsigned int portmask = (1<<i);
+               if (!state->vlan_enabled) {
+                       // share with everybody!
+                       state->ports[i].shareports = (1<<state->regs->NUM_PORTS)-1;
+                       continue;
+               }
+               state->ports[i].shareports = portmask;
+               for (j=0; j<MAX_VLANS; j++) {
+                       if (state->vlan_ports[j] & portmask)
+                               state->ports[i].shareports |= state->vlan_ports[j];
+               }
+       }
+       state->remove_tag = ((~state->add_tag) & ((1<<state->regs->NUM_PORTS)-1));
+}
+
+static int ip175c_get_enable_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int err;
+
+       err = get_state(state); // may be set in get_state.
+       if (err < 0)
+               return err;
+       val->value.i = state->vlan_enabled;
+       return 0;
+}
+
+static int ip175c_set_enable_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int err;
+       int enable;
+       int i;
+
+       err = get_state(state);
+       if (err < 0)
+               return err;
+       enable = val->value.i;
+
+       if (state->vlan_enabled == enable) {
+               // do not change any state.
+               return 0;
+       }
+       state->vlan_enabled = enable;
+
+       // Otherwise, if we are switching state, set fields to a known default.
+       state->remove_tag = 0x0000;
+       state->add_tag = 0x0000;
+       for (i = 0; i < MAX_PORTS; i++)
+               state->ports[i].shareports = 0xffff;
+
+       for (i = 0; i < MAX_VLANS; i++)
+               state->vlan_ports[i] = 0x0;
+
+       if (state->vlan_enabled) {
+               // updates other fields only based off vlan_ports and add_tag fields.
+               // Note that by default, no ports are in any vlans.
+               correct_vlan_state(state);
+       }
+       // ensure sane defaults?
+       return update_state(state);
+}
+
+static int ip175c_get_ports(struct switch_dev *dev, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int err;
+       int b;
+       int ind;
+       unsigned int ports;
+
+       if (val->port_vlan >= dev->vlans || val->port_vlan < 0)
+               return -EINVAL;
+
+       err = get_state(state);
+       if (err<0)
+               return err;
+
+       ports = state->vlan_ports[val->port_vlan];
+       b = 0;
+       ind = 0;
+       while (b < MAX_PORTS) {
+               if (ports&1) {
+                       int istagged = ((state->add_tag >> b) & 1);
+                       val->value.ports[ind].id = b;
+                       val->value.ports[ind].flags = (istagged << SWITCH_PORT_FLAG_TAGGED);
+                       ind++;
+               }
+               b++;
+               ports >>= 1;
+       }
+       val->len = ind;
+
+       return 0;
+}
+
+static int ip175c_set_ports(struct switch_dev *dev, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int i;
+       int err;
+
+       if (val->port_vlan >= dev->vlans || val->port_vlan < 0)
+               return -EINVAL;
+
+       err = get_state(state);
+       if (err < 0)
+               return err;
+
+       state->vlan_ports[val->port_vlan] = 0;
+       for (i = 0; i < val->len; i++) {
+               int bitmask = (1<<val->value.ports[i].id);
+               state->vlan_ports[val->port_vlan] |= bitmask;
+               if (val->value.ports[i].flags & (1<<SWITCH_PORT_FLAG_TAGGED)) {
+                       state->add_tag |= bitmask;
+               } else {
+                       state->add_tag &= (~bitmask);
+               }
+       }
+
+       correct_vlan_state(state);
+       err = update_state(state);
+
+       return err;
+}
+
+static int ip175c_apply(struct switch_dev *dev)
+{
+       struct ip175c_state *state = dev->priv;
+       int err;
+
+       err = get_flags(state);
+       if (err < 0)
+               return err;
+
+       if (REG_SUPP(state->regs->MII_REGISTER_EN)){
+               int val = getPhy(state, state->regs->MII_REGISTER_EN);
+               if (val < 0) {
+                       return val;
+               }
+               val |= (1<<state->regs->MII_REGISTER_EN_BIT);
+               return setPhy(state, state->regs->MII_REGISTER_EN, val);
+       }
+       return 0;
+}
+
+static int ip175c_reset(struct switch_dev *dev)
+{
+       struct ip175c_state *state = dev->priv;
+       int i, err;
+
+       err = get_flags(state);
+       if (err < 0)
+               return err;
+
+       if (REG_SUPP(state->regs->RESET_REG)) {
+               err = setPhy(state, state->regs->RESET_REG, state->regs->RESET_VAL);
+               if (err < 0)
+                       return err;
+               err = getPhy(state, state->regs->RESET_REG);
+
+               /* data sheet specifies reset period is 2 msec
+                  (don't see any mention of the 2ms delay in the IP178C spec, only
+                   in IP175C, but it can't hurt.) */
+               mdelay(2);
+       }
+
+       if (REG_SUPP(state->regs->MODE_REG)) {
+               err = setPhy(state, state->regs->MODE_REG, state->regs->RESET_VAL);
+               if (err < 0)
+                       return err;
+               err = getPhy(state, state->regs->MODE_REG);
+       }
+
+       /* reset switch ports */
+       for (i = 0; i < 5; i++) {
+               err = state->mii_bus->write(state->mii_bus, i,
+                                        MII_BMCR, BMCR_RESET);
+               if (err < 0)
+                       return err;
+       }
+
+       return 0;
+}
+
+/*! get the current register number */
+static int ip175c_get_tagged(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int err;
+
+       err = get_state(state);
+       if (err < 0)
+               return err;
+
+       if (state->add_tag & (1<<val->port_vlan)) {
+               if (state->remove_tag & (1<<val->port_vlan))
+                       val->value.i = 3; // shouldn't ever happen.
+               else
+                       val->value.i = 1;
+       } else {
+               if (state->remove_tag & (1<<val->port_vlan))
+                       val->value.i = 0;
+               else
+                       val->value.i = 2;
+       }
+       return 0;
+}
+
+/*! set a new register address for low level access to registers */
+static int ip175c_set_tagged(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int err;
+
+       err = get_state(state);
+       if (err < 0)
+               return err;
+
+       state->add_tag &= ~(1<<val->port_vlan);
+       state->remove_tag &= ~(1<<val->port_vlan);
+
+       if (val->value.i == 0)
+               state->remove_tag |= (1<<val->port_vlan);
+       if (val->value.i == 1)
+               state->add_tag |= (1<<val->port_vlan);
+
+       SET_PORT_BITS(state, state->add_tag,
+                                 state->regs->ADD_TAG_REG, state->regs->ADD_TAG_BIT);
+       SET_PORT_BITS(state, state->remove_tag,
+                                 state->regs->REMOVE_TAG_REG, state->regs->REMOVE_TAG_BIT);
+
+       return err;
+}
+
+
+/* low level /proc procedures */
+
+/*! get the current phy address */
+static int ip175c_get_phy(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+
+       val->value.i = state->proc_mii.p;
+       return 0;
+}
+
+/*! set a new phy address for low level access to registers */
+static int ip175c_set_phy(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int new_reg = val->value.i;
+
+       if (new_reg < 0 || new_reg > 31)
+               state->proc_mii.p = (u16)-1;
+       else
+               state->proc_mii.p = (u16)new_reg;
+       return 0;
+}
+
+/*! get the current register number */
+static int ip175c_get_reg(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+
+       val->value.i = state->proc_mii.m;
+       return 0;
+}
+
+/*! set a new register address for low level access to registers */
+static int ip175c_set_reg(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int new_reg = val->value.i;
+
+       if (new_reg < 0 || new_reg > 31)
+               state->proc_mii.m = (u16)-1;
+       else
+               state->proc_mii.m = (u16)new_reg;
+       return 0;
+}
+
+/*! get the register content of state->proc_mii */
+static int ip175c_get_val(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int retval = -EINVAL;
+       if (REG_SUPP(state->proc_mii))
+               retval = getPhy(state, state->proc_mii);
+
+       if (retval < 0) {
+               return retval;
+       } else {
+               val->value.i = retval;
+               return 0;
+       }
+}
+
+/*! write a value to the register defined by phy/reg above */
+static int ip175c_set_val(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       int myval, err = 0;
+
+       myval = val->value.i;
+       if (myval <= 0xffff && myval >= 0 && REG_SUPP(state->proc_mii)) {
+               err = setPhy(state, state->proc_mii, (u16)myval);
+       }
+       return err;
+}
+
+static int ip175c_read_name(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       val->value.s = state->regs->NAME; // just a const pointer, won't be freed by swconfig.
+       return 0;
+}
+
+
+static int ip175c_set_port_speed(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       struct mii_bus *bus = state->mii_bus;
+       int nr = val->port_vlan;
+       int ctrl;
+       int autoneg;
+       int speed;
+       if (val->value.i == 100) {
+               speed = 1;
+               autoneg = 0;
+       } else if (val->value.i == 10) {
+               speed = 0;
+               autoneg = 0;
+       } else {
+               autoneg = 1;
+               speed = 1;
+       }
+
+       /* can't set speed for cpu port */
+       if (nr == state->regs->CPU_PORT)
+               return -EINVAL;
+
+       if (nr >= dev->ports || nr < 0)
+               return -EINVAL;
+
+       ctrl = ip_phy_read(bus, nr, 0);
+       if (ctrl < 0)
+               return -EIO;
+
+       ctrl &= (~(1<<12));
+       ctrl &= (~(1<<13));
+       ctrl |= (autoneg<<12);
+       ctrl |= (speed<<13);
+
+       return ip_phy_write(bus, nr, 0, ctrl);
+}
+
+static int ip175c_get_port_speed(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       struct mii_bus *bus = state->mii_bus;
+       int nr = val->port_vlan;
+       int speed, status;
+
+       if (nr == state->regs->CPU_PORT) {
+               val->value.i = 100;
+               return 0;
+       }
+
+       if (nr >= dev->ports || nr < 0)
+               return -EINVAL;
+
+       status = ip_phy_read(bus, nr, 1);
+       speed = ip_phy_read(bus, nr, 18);
+       if (status < 0 || speed < 0)
+               return -EIO;
+
+       if (status & 4)
+               val->value.i = ((speed & (1<<11)) ? 100 : 10);
+       else
+               val->value.i = 0;
+
+       return 0;
+}
+
+
+static int ip175c_get_port_status(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct ip175c_state *state = dev->priv;
+       struct mii_bus *bus = state->mii_bus;
+       int ctrl, speed, status;
+       int nr = val->port_vlan;
+       int len;
+       char *buf = state->buf; // fixed-length at 80.
+
+       if (nr == state->regs->CPU_PORT) {
+               sprintf(buf, "up, 100 Mbps, cpu port");
+               val->value.s = buf;
+               return 0;
+       }
+
+       if (nr >= dev->ports || nr < 0)
+               return -EINVAL;
+
+       ctrl = ip_phy_read(bus, nr, 0);
+       status = ip_phy_read(bus, nr, 1);
+       speed = ip_phy_read(bus, nr, 18);
+       if (ctrl < 0 || status < 0 || speed < 0)
+               return -EIO;
+
+       if (status & 4)
+               len = sprintf(buf, "up, %d Mbps, %s duplex",
+                       ((speed & (1<<11)) ? 100 : 10),
+                       ((speed & (1<<10)) ? "full" : "half"));
+       else
+               len = sprintf(buf, "down");
+
+       if (ctrl & (1<<12)) {
+               len += sprintf(buf+len, ", auto-negotiate");
+               if (!(status & (1<<5)))
+                       len += sprintf(buf+len, " (in progress)");
+       } else {
+               len += sprintf(buf+len, ", fixed speed (%d)",
+                       ((ctrl & (1<<13)) ? 100 : 10));
+       }
+
+       buf[len] = '\0';
+       val->value.s = buf;
+       return 0;
+}
+
+static int ip175c_get_pvid(struct switch_dev *dev, int port, int *val)
+{
+       struct ip175c_state *state = dev->priv;
+
+       *val = state->ports[port].pvid;
+       return 0;
+}
+
+static int ip175c_set_pvid(struct switch_dev *dev, int port, int val)
+{
+       struct ip175c_state *state = dev->priv;
+
+       state->ports[port].pvid = val;
+
+       if (!REG_SUPP(state->regs->VLAN_DEFAULT_TAG_REG[port]))
+               return 0;
+
+       return setPhy(state, state->regs->VLAN_DEFAULT_TAG_REG[port], val);
+}
+
+
+enum Ports {
+       IP175C_PORT_STATUS,
+       IP175C_PORT_LINK,
+       IP175C_PORT_TAGGED,
+       IP175C_PORT_PVID,
+};
+
+enum Globals {
+       IP175C_ENABLE_VLAN,
+       IP175C_GET_NAME,
+       IP175C_REGISTER_PHY,
+       IP175C_REGISTER_MII,
+       IP175C_REGISTER_VALUE,
+       IP175C_REGISTER_ERRNO,
+};
+
+static const struct switch_attr ip175c_global[] = {
+       [IP175C_ENABLE_VLAN] = {
+               .id = IP175C_ENABLE_VLAN,
+               .type = SWITCH_TYPE_INT,
+               .name  = "enable_vlan",
+               .description = "Flag to enable or disable VLANs and tagging",
+               .get  = ip175c_get_enable_vlan,
+               .set = ip175c_set_enable_vlan,
+       },
+       [IP175C_GET_NAME] = {
+               .id = IP175C_GET_NAME,
+               .type = SWITCH_TYPE_STRING,
+               .description = "Returns the type of IC+ chip.",
+               .name  = "name",
+               .get  = ip175c_read_name,
+               .set = NULL,
+       },
+       /* jal: added for low level debugging etc. */
+       [IP175C_REGISTER_PHY] = {
+               .id = IP175C_REGISTER_PHY,
+               .type = SWITCH_TYPE_INT,
+               .description = "Direct register access: set phy (0-4, or 29,30,31)",
+               .name  = "phy",
+               .get  = ip175c_get_phy,
+               .set = ip175c_set_phy,
+       },
+       [IP175C_REGISTER_MII] = {
+               .id = IP175C_REGISTER_MII,
+               .type = SWITCH_TYPE_INT,
+               .description = "Direct register access: set mii number (0-31)",
+               .name  = "reg",
+               .get  = ip175c_get_reg,
+               .set = ip175c_set_reg,
+       },
+       [IP175C_REGISTER_VALUE] = {
+               .id = IP175C_REGISTER_VALUE,
+               .type = SWITCH_TYPE_INT,
+               .description = "Direct register access: read/write to register (0-65535)",
+               .name  = "val",
+               .get  = ip175c_get_val,
+               .set = ip175c_set_val,
+       },
+};
+
+static const struct switch_attr ip175c_vlan[] = {
+};
+
+static const struct switch_attr ip175c_port[] = {
+       [IP175C_PORT_STATUS] = {
+               .id = IP175C_PORT_STATUS,
+               .type = SWITCH_TYPE_STRING,
+               .description = "Returns Detailed port status",
+               .name  = "status",
+               .get  = ip175c_get_port_status,
+               .set = NULL,
+       },
+       [IP175C_PORT_LINK] = {
+               .id = IP175C_PORT_LINK,
+               .type = SWITCH_TYPE_INT,
+               .description = "Link speed. Can write 0 for auto-negotiate, or 10 or 100",
+               .name  = "link",
+               .get  = ip175c_get_port_speed,
+               .set = ip175c_set_port_speed,
+       },
+       [IP175C_PORT_TAGGED] = {
+               .id = IP175C_PORT_LINK,
+               .type = SWITCH_TYPE_INT,
+               .description = "0 = untag, 1 = add tags, 2 = do not alter (This value is reset if vlans are altered)",
+               .name  = "tagged",
+               .get  = ip175c_get_tagged,
+               .set = ip175c_set_tagged,
+       },
+};
+
+static int ip175c_probe(struct phy_device *pdev)
+{
+       struct ip175c_state *state;
+       struct switch_dev *dev;
+       int err;
+
+       /* we only attach to PHY 0, but use all available PHYs */
+       if (pdev->addr != 0)
+               return -ENODEV;
+
+       state = kzalloc(sizeof(*state), GFP_KERNEL);
+       if (!state)
+               return -ENOMEM;
+
+       dev = &state->dev;
+       dev->attr_global.attr = ip175c_global;
+       dev->attr_global.n_attr = ARRAY_SIZE(ip175c_global);
+       dev->attr_port.attr = ip175c_port;
+       dev->attr_port.n_attr = ARRAY_SIZE(ip175c_port);
+       dev->attr_vlan.attr = ip175c_vlan;
+       dev->attr_vlan.n_attr = ARRAY_SIZE(ip175c_vlan);
+
+       dev->get_port_pvid = ip175c_get_pvid;
+       dev->set_port_pvid = ip175c_set_pvid;
+       dev->get_vlan_ports = ip175c_get_ports;
+       dev->set_vlan_ports = ip175c_set_ports;
+       dev->apply_config = ip175c_apply;
+       dev->reset_switch = ip175c_reset;
+
+       dev->priv = state;
+       pdev->priv = state;
+       state->mii_bus = pdev->bus;
+
+       err = get_model(state);
+       if (err < 0)
+               goto error;
+
+       dev->vlans = MAX_VLANS;
+       dev->cpu_port = state->regs->CPU_PORT;
+       dev->ports = state->regs->NUM_PORTS;
+       dev->name = state->regs->NAME;
+
+       return 0;
+
+error:
+       kfree(state);
+       return err;
+}
+
+static int ip175c_config_init(struct phy_device *pdev)
+{
+       struct ip175c_state *state = pdev->priv;
+       struct net_device *dev = pdev->attached_dev;
+       int err;
+
+       pdev->irq = PHY_IGNORE_INTERRUPT;
+       err = register_switch(&state->dev, dev);
+       if (err < 0)
+               return err;
+
+       ip175c_reset(&state->dev);
+
+       state->registered = true;
+       netif_carrier_on(pdev->attached_dev);
+
+       return 0;
+}
+
+static void ip175c_remove(struct phy_device *pdev)
+{
+       struct ip175c_state *state = pdev->priv;
+
+       if (state->registered)
+               unregister_switch(&state->dev);
+       kfree(state);
+}
+
+static int ip175c_config_aneg(struct phy_device *pdev)
+{
+       return 0;
+}
+
+static int ip175c_read_status(struct phy_device *pdev)
+{
+       pdev->speed = SPEED_100;
+       pdev->duplex = DUPLEX_FULL;
+       pdev->pause = pdev->asym_pause = 0;
+       return 0;
+}
+
+static struct phy_driver ip175c_driver = {
+       .name           = "IC+ IP175C",
+       .phy_id         = 0x02430d80,
+       .phy_id_mask    = 0x0ffffff0,
+       .features       = PHY_BASIC_FEATURES,
+       .probe          = ip175c_probe,
+       .remove         = ip175c_remove,
+       .config_init    = ip175c_config_init,
+       .config_aneg    = ip175c_config_aneg,
+       .read_status    = ip175c_read_status,
+       .driver         = { .owner = THIS_MODULE },
+};
+
+
+int __init ip175c_init(void)
+{
+       return phy_driver_register(&ip175c_driver);
+}
+
+void __exit ip175c_exit(void)
+{
+       phy_driver_unregister(&ip175c_driver);
+}
+
+MODULE_AUTHOR("Patrick Horn <patrick.horn@gmail.com>");
+MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
+MODULE_LICENSE("GPL");
+
+module_init(ip175c_init);
+module_exit(ip175c_exit);
+
diff --git a/target/linux/generic-2.6/files-2.6.26/drivers/net/phy/swconfig.c b/target/linux/generic-2.6/files-2.6.26/drivers/net/phy/swconfig.c
new file mode 100644 (file)
index 0000000..7207e46
--- /dev/null
@@ -0,0 +1,920 @@
+/*
+ * swconfig.c: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/capability.h>
+#include <linux/skbuff.h>
+#include <linux/switch.h>
+
+//#define DEBUG 1
+#ifdef DEBUG
+#define DPRINTF(format, ...) printk("%s: " format, __func__, ##__VA_ARGS__)
+#else
+#define DPRINTF(...) do {} while(0)
+#endif
+
+MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
+MODULE_LICENSE("GPL");
+
+static int swdev_id = 0;
+static struct list_head swdevs;
+static spinlock_t swdevs_lock = SPIN_LOCK_UNLOCKED;
+struct swconfig_callback;
+
+struct swconfig_callback
+{
+       struct sk_buff *msg;
+       struct genlmsghdr *hdr;
+       struct genl_info *info;
+       int cmd;
+
+       /* callback for filling in the message data */
+       int (*fill)(struct swconfig_callback *cb, void *arg);
+
+       /* callback for closing the message before sending it */
+       int (*close)(struct swconfig_callback *cb, void *arg);
+
+       struct nlattr *nest[4];
+       int args[4];
+};
+
+/* defaults */
+
+static int
+swconfig_get_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       int ret;
+       if (val->port_vlan >= dev->vlans)
+               return -EINVAL;
+
+       if (!dev->get_vlan_ports)
+               return -EOPNOTSUPP;
+
+       ret = dev->get_vlan_ports(dev, val);
+       return ret;
+}
+
+static int
+swconfig_set_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       struct switch_port *ports = val->value.ports;
+       int i;
+
+       if (val->port_vlan >= dev->vlans)
+               return -EINVAL;
+
+       /* validate ports */
+       if (val->len > dev->ports)
+               return -EINVAL;
+
+       if (!dev->set_vlan_ports)
+               return -EOPNOTSUPP;
+
+       for (i = 0; i < val->len; i++) {
+               if (ports[i].id >= dev->ports)
+                       return -EINVAL;
+
+               if (dev->set_port_pvid && !(ports[i].flags & SWITCH_PORT_FLAG_TAGGED))
+                       dev->set_port_pvid(dev, ports[i].id, val->port_vlan);
+       }
+
+       return dev->set_vlan_ports(dev, val);
+}
+
+static int
+swconfig_set_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       if (val->port_vlan >= dev->ports)
+               return -EINVAL;
+
+       if (!dev->set_port_pvid)
+               return -EOPNOTSUPP;
+
+       return dev->set_port_pvid(dev, val->port_vlan, val->value.i);
+}
+
+static int
+swconfig_get_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       if (val->port_vlan >= dev->ports)
+               return -EINVAL;
+
+       if (!dev->get_port_pvid)
+               return -EOPNOTSUPP;
+
+       return dev->get_port_pvid(dev, val->port_vlan, &val->value.i);
+}
+
+static int
+swconfig_apply_config(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       /* don't complain if not supported by the switch driver */
+       if (!dev->apply_config)
+               return 0;
+
+       return dev->apply_config(dev);
+}
+
+static int
+swconfig_reset_switch(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+       /* don't complain if not supported by the switch driver */
+       if (!dev->reset_switch)
+               return 0;
+
+       return dev->reset_switch(dev);
+}
+
+enum global_defaults {
+       GLOBAL_APPLY,
+       GLOBAL_RESET,
+};
+
+enum vlan_defaults {
+       VLAN_PORTS,
+};
+
+enum port_defaults {
+       PORT_PVID,
+};
+
+static struct switch_attr default_global[] = {
+       [GLOBAL_APPLY] = {
+               .type = SWITCH_TYPE_NOVAL,
+               .name = "apply",
+               .description = "Activate changes in the hardware",
+               .set = swconfig_apply_config,
+       },
+       [GLOBAL_RESET] = {
+               .type = SWITCH_TYPE_NOVAL,
+               .name = "reset",
+               .description = "Reset the switch",
+               .set = swconfig_reset_switch,
+       }
+};
+
+static struct switch_attr default_port[] = {
+       [PORT_PVID] = {
+               .type = SWITCH_TYPE_INT,
+               .name = "pvid",
+               .description = "Primary VLAN ID",
+               .set = swconfig_set_pvid,
+               .get = swconfig_get_pvid,
+       }
+};
+
+static struct switch_attr default_vlan[] = {
+       [VLAN_PORTS] = {
+               .type = SWITCH_TYPE_PORTS,
+               .name = "ports",
+               .description = "VLAN port mapping",
+               .set = swconfig_set_vlan_ports,
+               .get = swconfig_get_vlan_ports,
+       },
+};
+
+
+static void swconfig_defaults_init(struct switch_dev *dev)
+{
+       dev->def_global = 0;
+       dev->def_vlan = 0;
+       dev->def_port = 0;
+
+       if (dev->get_vlan_ports || dev->set_vlan_ports)
+               set_bit(VLAN_PORTS, &dev->def_vlan);
+
+       if (dev->get_port_pvid || dev->set_port_pvid)
+               set_bit(PORT_PVID, &dev->def_port);
+
+       /* always present, can be no-op */
+       set_bit(GLOBAL_APPLY, &dev->def_global);
+       set_bit(GLOBAL_RESET, &dev->def_global);
+}
+
+
+static struct genl_family switch_fam = {
+       .id = GENL_ID_GENERATE,
+       .name = "switch",
+       .hdrsize = 0,
+       .version = 1,
+       .maxattr = SWITCH_ATTR_MAX,
+};
+
+static const struct nla_policy switch_policy[SWITCH_ATTR_MAX+1] = {
+       [SWITCH_ATTR_ID] = { .type = NLA_U32 },
+       [SWITCH_ATTR_OP_ID] = { .type = NLA_U32 },
+       [SWITCH_ATTR_OP_PORT] = { .type = NLA_U32 },
+       [SWITCH_ATTR_OP_VLAN] = { .type = NLA_U32 },
+       [SWITCH_ATTR_OP_VALUE_INT] = { .type = NLA_U32 },
+       [SWITCH_ATTR_OP_VALUE_STR] = { .type = NLA_NUL_STRING },
+       [SWITCH_ATTR_OP_VALUE_PORTS] = { .type = NLA_NESTED },
+       [SWITCH_ATTR_TYPE] = { .type = NLA_U32 },
+};
+
+static const struct nla_policy port_policy[SWITCH_PORT_ATTR_MAX+1] = {
+       [SWITCH_PORT_ID] = { .type = NLA_U32 },
+       [SWITCH_PORT_FLAG_TAGGED] = { .type = NLA_FLAG },
+};
+
+static inline void
+swconfig_lock(void)
+{
+       spin_lock(&swdevs_lock);
+}
+
+static inline void
+swconfig_unlock(void)
+{
+       spin_unlock(&swdevs_lock);
+}
+
+static struct switch_dev *
+swconfig_get_dev(struct genl_info *info)
+{
+       struct switch_dev *dev = NULL;
+       struct switch_dev *p;
+       int id;
+
+       if (!info->attrs[SWITCH_ATTR_ID])
+               goto done;
+
+       id = nla_get_u32(info->attrs[SWITCH_ATTR_ID]);
+       swconfig_lock();
+       list_for_each_entry(p, &swdevs, dev_list) {
+               if (id != p->id)
+                       continue;
+
+               dev = p;
+               break;
+       }
+       if (dev)
+               spin_lock(&dev->lock);
+       else
+               DPRINTF("device %d not found\n", id);
+       swconfig_unlock();
+done:
+       return dev;
+}
+
+static inline void
+swconfig_put_dev(struct switch_dev *dev)
+{
+       spin_unlock(&dev->lock);
+}
+
+static int
+swconfig_dump_attr(struct swconfig_callback *cb, void *arg)
+{
+       struct switch_attr *op = arg;
+       struct genl_info *info = cb->info;
+       struct sk_buff *msg = cb->msg;
+       int id = cb->args[0];
+       void *hdr;
+
+       hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &switch_fam,
+                       NLM_F_MULTI, SWITCH_CMD_NEW_ATTR);
+       if (IS_ERR(hdr))
+               return -1;
+
+       NLA_PUT_U32(msg, SWITCH_ATTR_OP_ID, id);
+       NLA_PUT_U32(msg, SWITCH_ATTR_OP_TYPE, op->type);
+       NLA_PUT_STRING(msg, SWITCH_ATTR_OP_NAME, op->name);
+       if (op->description)
+               NLA_PUT_STRING(msg, SWITCH_ATTR_OP_DESCRIPTION,
+                       op->description);
+
+       return genlmsg_end(msg, hdr);
+nla_put_failure:
+       genlmsg_cancel(msg, hdr);
+       return -EMSGSIZE;
+}
+
+/* spread multipart messages across multiple message buffers */
+static int
+swconfig_send_multipart(struct swconfig_callback *cb, void *arg)
+{
+       struct genl_info *info = cb->info;
+       int restart = 0;
+       int err;
+
+       do {
+               if (!cb->msg) {
+                       cb->msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+                       if (cb->msg == NULL)
+                               goto error;
+               }
+
+               if (!(cb->fill(cb, arg) < 0))
+                       break;
+
+               /* fill failed, check if this was already the second attempt */
+               if (restart)
+                       goto error;
+
+               /* try again in a new message, send the current one */
+               restart = 1;
+               if (cb->close) {
+                       if (cb->close(cb, arg) < 0)
+                               goto error;
+               }
+               err = genlmsg_unicast(cb->msg, info->snd_pid);
+               cb->msg = NULL;
+               if (err < 0)
+                       goto error;
+
+       } while (restart);
+
+       return 0;
+
+error:
+       if (cb->msg)
+               nlmsg_free(cb->msg);
+       return -1;
+}
+
+static int
+swconfig_list_attrs(struct sk_buff *skb, struct genl_info *info)
+{
+       struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
+       const struct switch_attrlist *alist;
+       struct switch_dev *dev;
+       struct swconfig_callback cb;
+       int err = -EINVAL;
+       int i;
+
+       /* defaults */
+       struct switch_attr *def_list;
+       unsigned long *def_active;
+       int n_def;
+
+       dev = swconfig_get_dev(info);
+       if (!dev)
+               return -EINVAL;
+
+       switch(hdr->cmd) {
+       case SWITCH_CMD_LIST_GLOBAL:
+               alist = &dev->attr_global;
+               def_list = default_global;
+               def_active = &dev->def_global;
+               n_def = ARRAY_SIZE(default_global);
+               break;
+       case SWITCH_CMD_LIST_VLAN:
+               alist = &dev->attr_vlan;
+               def_list = default_vlan;
+               def_active = &dev->def_vlan;
+               n_def = ARRAY_SIZE(default_vlan);
+               break;
+       case SWITCH_CMD_LIST_PORT:
+               alist = &dev->attr_port;
+               def_list = default_port;
+               def_active = &dev->def_port;
+               n_def = ARRAY_SIZE(default_port);
+               break;
+       default:
+               WARN_ON(1);
+               goto out;
+       }
+
+       memset(&cb, 0, sizeof(cb));
+       cb.info = info;
+       cb.fill = swconfig_dump_attr;
+       for (i = 0; i < alist->n_attr; i++) {
+               if (alist->attr[i].disabled)
+                       continue;
+               cb.args[0] = i;
+               err = swconfig_send_multipart(&cb, (void *) &alist->attr[i]);
+               if (err < 0)
+                       goto error;
+       }
+
+       /* defaults */
+       for (i = 0; i < n_def; i++) {
+               if (!test_bit(i, def_active))
+                       continue;
+               cb.args[0] = SWITCH_ATTR_DEFAULTS_OFFSET + i;
+               err = swconfig_send_multipart(&cb, (void *) &def_list[i]);
+               if (err < 0)
+                       goto error;
+       }
+       swconfig_put_dev(dev);
+
+       if (!cb.msg)
+               return 0;
+
+       return genlmsg_unicast(cb.msg, info->snd_pid);
+
+error:
+       if (cb.msg)
+               nlmsg_free(cb.msg);
+out:
+       swconfig_put_dev(dev);
+       return err;
+}
+
+static const struct switch_attr *
+swconfig_lookup_attr(struct switch_dev *dev, struct genl_info *info,
+               struct switch_val *val)
+{
+       struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
+       const struct switch_attrlist *alist;
+       const struct switch_attr *attr = NULL;
+       int attr_id;
+
+       /* defaults */
+       struct switch_attr *def_list;
+       unsigned long *def_active;
+       int n_def;
+
+       if (!info->attrs[SWITCH_ATTR_OP_ID])
+               goto done;
+
+       switch(hdr->cmd) {
+       case SWITCH_CMD_SET_GLOBAL:
+       case SWITCH_CMD_GET_GLOBAL:
+               alist = &dev->attr_global;
+               def_list = default_global;
+               def_active = &dev->def_global;
+               n_def = ARRAY_SIZE(default_global);
+               break;
+       case SWITCH_CMD_SET_VLAN:
+       case SWITCH_CMD_GET_VLAN:
+               alist = &dev->attr_vlan;
+               def_list = default_vlan;
+               def_active = &dev->def_vlan;
+               n_def = ARRAY_SIZE(default_vlan);
+               if (!info->attrs[SWITCH_ATTR_OP_VLAN])
+                       goto done;
+               val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_VLAN]);
+               break;
+       case SWITCH_CMD_SET_PORT:
+       case SWITCH_CMD_GET_PORT:
+               alist = &dev->attr_port;
+               def_list = default_port;
+               def_active = &dev->def_port;
+               n_def = ARRAY_SIZE(default_port);
+               if (!info->attrs[SWITCH_ATTR_OP_PORT])
+                       goto done;
+               val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_PORT]);
+               break;
+       default:
+               WARN_ON(1);
+               goto done;
+       }
+
+       if (!alist)
+               goto done;
+
+       attr_id = nla_get_u32(info->attrs[SWITCH_ATTR_OP_ID]);
+       if (attr_id >= SWITCH_ATTR_DEFAULTS_OFFSET) {
+               attr_id -= SWITCH_ATTR_DEFAULTS_OFFSET;
+               if (attr_id >= n_def)
+                       goto done;
+               if (!test_bit(attr_id, def_active))
+                       goto done;
+               attr = &def_list[attr_id];
+       } else {
+               if (attr_id >= alist->n_attr)
+                       goto done;
+               attr = &alist->attr[attr_id];
+       }
+
+       if (attr->disabled)
+               attr = NULL;
+
+done:
+       if (!attr)
+               DPRINTF("attribute lookup failed\n");
+       val->attr = attr;
+       return attr;
+}
+
+static int
+swconfig_parse_ports(struct sk_buff *msg, struct nlattr *head,
+               struct switch_val *val, int max)
+{
+       struct nlattr *nla;
+       int rem;
+
+       val->len = 0;
+       nla_for_each_nested(nla, head, rem) {
+               struct nlattr *tb[SWITCH_PORT_ATTR_MAX+1];
+               struct switch_port *port = &val->value.ports[val->len];
+
+               if (val->len >= max)
+                       return -EINVAL;
+
+               if (nla_parse_nested(tb, SWITCH_PORT_ATTR_MAX, nla,
+                               port_policy))
+                       return -EINVAL;
+
+               if (!tb[SWITCH_PORT_ID])
+                       return -EINVAL;
+
+               port->id = nla_get_u32(tb[SWITCH_PORT_ID]);
+               if (tb[SWITCH_PORT_FLAG_TAGGED])
+                       port->flags |= (1 << SWITCH_PORT_FLAG_TAGGED);
+               val->len++;
+       }
+
+       return 0;
+}
+
+static int
+swconfig_set_attr(struct sk_buff *skb, struct genl_info *info)
+{
+       const struct switch_attr *attr;
+       struct switch_dev *dev;
+       struct switch_val val;
+       int err = -EINVAL;
+
+       dev = swconfig_get_dev(info);
+       if (!dev)
+               return -EINVAL;
+
+       memset(&val, 0, sizeof(val));
+       attr = swconfig_lookup_attr(dev, info, &val);
+       if (!attr || !attr->set)
+               goto error;
+
+       val.attr = attr;
+       switch(attr->type) {
+       case SWITCH_TYPE_NOVAL:
+               break;
+       case SWITCH_TYPE_INT:
+               if (!info->attrs[SWITCH_ATTR_OP_VALUE_INT])
+                       goto error;
+               val.value.i =
+                       nla_get_u32(info->attrs[SWITCH_ATTR_OP_VALUE_INT]);
+               break;
+       case SWITCH_TYPE_STRING:
+               if (!info->attrs[SWITCH_ATTR_OP_VALUE_STR])
+                       goto error;
+               val.value.s =
+                       nla_data(info->attrs[SWITCH_ATTR_OP_VALUE_STR]);
+               break;
+       case SWITCH_TYPE_PORTS:
+               val.value.ports = dev->portbuf;
+               memset(dev->portbuf, 0,
+                       sizeof(struct switch_port) * dev->ports);
+
+               /* TODO: implement multipart? */
+               if (info->attrs[SWITCH_ATTR_OP_VALUE_PORTS]) {
+                       err = swconfig_parse_ports(skb,
+                               info->attrs[SWITCH_ATTR_OP_VALUE_PORTS], &val, dev->ports);
+                       if (err < 0)
+                               goto error;
+               } else {
+                       val.len = 0;
+                       err = 0;
+               }
+               break;
+       default:
+               goto error;
+       }
+
+       err = attr->set(dev, attr, &val);
+error:
+       swconfig_put_dev(dev);
+       return err;
+}
+
+static int
+swconfig_close_portlist(struct swconfig_callback *cb, void *arg)
+{
+       if (cb->nest[0])
+               nla_nest_end(cb->msg, cb->nest[0]);
+       return 0;
+}
+
+static int
+swconfig_send_port(struct swconfig_callback *cb, void *arg)
+{
+       const struct switch_port *port = arg;
+       struct nlattr *p = NULL;
+
+       if (!cb->nest[0]) {
+               cb->nest[0] = nla_nest_start(cb->msg, cb->cmd);
+               if (!cb->nest[0])
+                       return -1;
+       }
+
+       p = nla_nest_start(cb->msg, SWITCH_ATTR_PORT);
+       if (!p)
+               goto error;
+
+       NLA_PUT_U32(cb->msg, SWITCH_PORT_ID, port->id);
+       if (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
+               NLA_PUT_FLAG(cb->msg, SWITCH_PORT_FLAG_TAGGED);
+
+       nla_nest_end(cb->msg, p);
+       return 0;
+
+nla_put_failure:
+               nla_nest_cancel(cb->msg, p);
+error:
+       nla_nest_cancel(cb->msg, cb->nest[0]);
+       return -1;
+}
+
+static int
+swconfig_send_ports(struct sk_buff **msg, struct genl_info *info, int attr,
+               const struct switch_val *val)
+{
+       struct swconfig_callback cb;
+       int err = 0;
+       int i;
+
+       if (!val->value.ports)
+               return -EINVAL;
+
+       memset(&cb, 0, sizeof(cb));
+       cb.cmd = attr;
+       cb.msg = *msg;
+       cb.info = info;
+       cb.fill = swconfig_send_port;
+       cb.close = swconfig_close_portlist;
+
+       cb.nest[0] = nla_nest_start(cb.msg, cb.cmd);
+       for (i = 0; i < val->len; i++) {
+               err = swconfig_send_multipart(&cb, &val->value.ports[i]);
+               if (err)
+                       goto done;
+       }
+       err = val->len;
+       swconfig_close_portlist(&cb, NULL);
+       *msg = cb.msg;
+
+done:
+       return err;
+}
+
+static int
+swconfig_get_attr(struct sk_buff *skb, struct genl_info *info)
+{
+       struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
+       const struct switch_attr *attr;
+       struct switch_dev *dev;
+       struct sk_buff *msg = NULL;
+       struct switch_val val;
+       int err = -EINVAL;
+       int cmd = hdr->cmd;
+
+       dev = swconfig_get_dev(info);
+       if (!dev)
+               return -EINVAL;
+
+       memset(&val, 0, sizeof(val));
+       attr = swconfig_lookup_attr(dev, info, &val);
+       if (!attr || !attr->get)
+               goto error_dev;
+
+       if (attr->type == SWITCH_TYPE_PORTS) {
+               val.value.ports = dev->portbuf;
+               memset(dev->portbuf, 0,
+                       sizeof(struct switch_port) * dev->ports);
+       }
+
+       err = attr->get(dev, attr, &val);
+       if (err)
+               goto error;
+
+       msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+       if (!msg)
+               goto error;
+
+       hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &switch_fam,
+                       0, cmd);
+       if (IS_ERR(hdr))
+               goto nla_put_failure;
+
+       switch(attr->type) {
+       case SWITCH_TYPE_INT:
+               NLA_PUT_U32(msg, SWITCH_ATTR_OP_VALUE_INT, val.value.i);
+               break;
+       case SWITCH_TYPE_STRING:
+               NLA_PUT_STRING(msg, SWITCH_ATTR_OP_VALUE_STR, val.value.s);
+               break;
+       case SWITCH_TYPE_PORTS:
+               err = swconfig_send_ports(&msg, info,
+                               SWITCH_ATTR_OP_VALUE_PORTS, &val);
+               if (err < 0)
+                       goto nla_put_failure;
+               break;
+       default:
+               DPRINTF("invalid type in attribute\n");
+               err = -EINVAL;
+               goto error;
+       }
+       err = genlmsg_end(msg, hdr);
+       if (err < 0)
+               goto nla_put_failure;
+
+       swconfig_put_dev(dev);
+       return genlmsg_unicast(msg, info->snd_pid);
+
+nla_put_failure:
+       if (msg)
+               nlmsg_free(msg);
+error_dev:
+       swconfig_put_dev(dev);
+error:
+       if (!err)
+               err = -ENOMEM;
+       return err;
+}
+
+static int
+swconfig_send_switch(struct sk_buff *msg, u32 pid, u32 seq, int flags,
+               const struct switch_dev *dev)
+{
+       void *hdr;
+
+       hdr = genlmsg_put(msg, pid, seq, &switch_fam, flags,
+                       SWITCH_CMD_NEW_ATTR);
+       if (IS_ERR(hdr))
+               return -1;
+
+       NLA_PUT_U32(msg, SWITCH_ATTR_ID, dev->id);
+       NLA_PUT_STRING(msg, SWITCH_ATTR_NAME, dev->name);
+       NLA_PUT_STRING(msg, SWITCH_ATTR_DEV_NAME, dev->devname);
+       NLA_PUT_U32(msg, SWITCH_ATTR_VLANS, dev->vlans);
+       NLA_PUT_U32(msg, SWITCH_ATTR_PORTS, dev->ports);
+
+       return genlmsg_end(msg, hdr);
+nla_put_failure:
+       genlmsg_cancel(msg, hdr);
+       return -EMSGSIZE;
+}
+
+static int swconfig_dump_switches(struct sk_buff *skb,
+               struct netlink_callback *cb)
+{
+       struct switch_dev *dev;
+       int start = cb->args[0];
+       int idx = 0;
+
+       swconfig_lock();
+       list_for_each_entry(dev, &swdevs, dev_list) {
+               if (++idx <= start)
+                       continue;
+               if (swconfig_send_switch(skb, NETLINK_CB(cb->skb).pid,
+                               cb->nlh->nlmsg_seq, NLM_F_MULTI,
+                               dev) < 0)
+                       break;
+       }
+       swconfig_unlock();
+       cb->args[0] = idx;
+
+       return skb->len;
+}
+
+static int
+swconfig_done(struct netlink_callback *cb)
+{
+       return 0;
+}
+
+static struct genl_ops swconfig_ops[] = {
+       {
+               .cmd = SWITCH_CMD_LIST_GLOBAL,
+               .doit = swconfig_list_attrs,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_LIST_VLAN,
+               .doit = swconfig_list_attrs,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_LIST_PORT,
+               .doit = swconfig_list_attrs,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_GET_GLOBAL,
+               .doit = swconfig_get_attr,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_GET_VLAN,
+               .doit = swconfig_get_attr,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_GET_PORT,
+               .doit = swconfig_get_attr,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_SET_GLOBAL,
+               .doit = swconfig_set_attr,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_SET_VLAN,
+               .doit = swconfig_set_attr,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_SET_PORT,
+               .doit = swconfig_set_attr,
+               .policy = switch_policy,
+       },
+       {
+               .cmd = SWITCH_CMD_GET_SWITCH,
+               .dumpit = swconfig_dump_switches,
+               .policy = switch_policy,
+               .done = swconfig_done,
+       }
+};
+
+int
+register_switch(struct switch_dev *dev, struct net_device *netdev)
+{
+       INIT_LIST_HEAD(&dev->dev_list);
+       if (netdev) {
+               dev->netdev = netdev;
+               if (!dev->devname)
+                       dev->devname = netdev->name;
+       }
+       BUG_ON(!dev->devname);
+
+       if (dev->ports > 0) {
+               dev->portbuf = kzalloc(sizeof(struct switch_port) * dev->ports,
+                               GFP_KERNEL);
+               if (!dev->portbuf)
+                       return -ENOMEM;
+       }
+       dev->id = ++swdev_id;
+       swconfig_defaults_init(dev);
+       spin_lock_init(&dev->lock);
+       swconfig_lock();
+       list_add(&dev->dev_list, &swdevs);
+       swconfig_unlock();
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(register_switch);
+
+void
+unregister_switch(struct switch_dev *dev)
+{
+       kfree(dev->portbuf);
+       spin_lock(&dev->lock);
+       swconfig_lock();
+       list_del(&dev->dev_list);
+       swconfig_unlock();
+}
+EXPORT_SYMBOL_GPL(unregister_switch);
+
+
+static int __init
+swconfig_init(void)
+{
+       int i, err;
+
+       INIT_LIST_HEAD(&swdevs);
+       err = genl_register_family(&switch_fam);
+       if (err)
+               return err;
+
+       for (i = 0; i < ARRAY_SIZE(swconfig_ops); i++) {
+               err = genl_register_ops(&switch_fam, &swconfig_ops[i]);
+               if (err)
+                       goto unregister;
+       }
+
+       return 0;
+
+unregister:
+       genl_unregister_family(&switch_fam);
+       return err;
+}
+
+static void __exit
+swconfig_exit(void)
+{
+       genl_unregister_family(&switch_fam);
+}
+
+module_init(swconfig_init);
+module_exit(swconfig_exit);
+
diff --git a/target/linux/generic-2.6/files-2.6.26/include/linux/switch.h b/target/linux/generic-2.6/files-2.6.26/include/linux/switch.h
new file mode 100644 (file)
index 0000000..98b86e8
--- /dev/null
@@ -0,0 +1,171 @@
+/*
+ * switch.h: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_SWITCH_H
+#define __LINUX_SWITCH_H
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/genetlink.h>
+#ifndef __KERNEL__
+#include <netlink/netlink.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/ctrl.h>
+#else
+#include <net/genetlink.h>
+#endif
+
+/* main attributes */
+enum {
+       SWITCH_ATTR_UNSPEC,
+       /* global */
+       SWITCH_ATTR_TYPE,
+       /* device */
+       SWITCH_ATTR_ID,
+       SWITCH_ATTR_NAME,
+       SWITCH_ATTR_DEV_NAME,
+       SWITCH_ATTR_VLANS,
+       SWITCH_ATTR_PORTS,
+       /* attributes */
+       SWITCH_ATTR_OP_ID,
+       SWITCH_ATTR_OP_TYPE,
+       SWITCH_ATTR_OP_NAME,
+       SWITCH_ATTR_OP_PORT,
+       SWITCH_ATTR_OP_VLAN,
+       SWITCH_ATTR_OP_VALUE_INT,
+       SWITCH_ATTR_OP_VALUE_STR,
+       SWITCH_ATTR_OP_VALUE_PORTS,
+       SWITCH_ATTR_OP_DESCRIPTION,
+       /* port lists */
+       SWITCH_ATTR_PORT,
+       SWITCH_ATTR_MAX
+};
+
+/* commands */
+enum {
+       SWITCH_CMD_UNSPEC,
+       SWITCH_CMD_GET_SWITCH,
+       SWITCH_CMD_NEW_ATTR,
+       SWITCH_CMD_LIST_GLOBAL,
+       SWITCH_CMD_GET_GLOBAL,
+       SWITCH_CMD_SET_GLOBAL,
+       SWITCH_CMD_LIST_PORT,
+       SWITCH_CMD_GET_PORT,
+       SWITCH_CMD_SET_PORT,
+       SWITCH_CMD_LIST_VLAN,
+       SWITCH_CMD_GET_VLAN,
+       SWITCH_CMD_SET_VLAN
+};
+
+/* data types */
+enum switch_val_type {
+       SWITCH_TYPE_UNSPEC,
+       SWITCH_TYPE_INT,
+       SWITCH_TYPE_STRING,
+       SWITCH_TYPE_PORTS,
+       SWITCH_TYPE_NOVAL,
+};
+
+/* port nested attributes */
+enum {
+       SWITCH_PORT_UNSPEC,
+       SWITCH_PORT_ID,
+       SWITCH_PORT_FLAG_TAGGED,
+       SWITCH_PORT_ATTR_MAX
+};
+
+#define SWITCH_ATTR_DEFAULTS_OFFSET    0x1000
+
+#ifdef __KERNEL__
+
+struct switch_dev;
+struct switch_op;
+struct switch_val;
+struct switch_attr;
+struct switch_attrlist;
+
+int register_switch(struct switch_dev *dev, struct net_device *netdev);
+void unregister_switch(struct switch_dev *dev);
+
+struct switch_attrlist {
+       /* filled in by the driver */
+       int n_attr;
+       const struct switch_attr *attr;
+};
+
+
+struct switch_dev {
+       int id;
+       void *priv;
+       const char *name;
+
+       /* NB: either devname or netdev must be set */
+       const char *devname;
+       struct net_device *netdev;
+
+       int ports;
+       int vlans;
+       int cpu_port;
+       struct switch_attrlist attr_global, attr_port, attr_vlan;
+
+       spinlock_t lock;
+       struct switch_port *portbuf;
+       struct list_head dev_list;
+       unsigned long def_global, def_port, def_vlan;
+
+       int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+       int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+       int (*get_port_pvid)(struct switch_dev *dev, int port, int *val);
+       int (*set_port_pvid)(struct switch_dev *dev, int port, int val);
+       int (*apply_config)(struct switch_dev *dev);
+       int (*reset_switch)(struct switch_dev *dev);
+};
+
+struct switch_port {
+       u32 id;
+       u32 flags;
+};
+
+struct switch_val {
+       const struct switch_attr *attr;
+       int port_vlan;
+       int len;
+       union {
+               const char *s;
+               u32 i;
+               struct switch_port *ports;
+       } value;
+};
+
+struct switch_attr {
+       int disabled;
+       int type;
+       const char *name;
+       const char *description;
+
+       int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+       int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+
+       /* for driver internal use */
+       int id;
+       int ofs;
+       int max;
+};
+
+#endif
+
+#endif
diff --git a/target/linux/generic-2.6/patches-2.6.26/650-swconfig.patch b/target/linux/generic-2.6/patches-2.6.26/650-swconfig.patch
new file mode 100644 (file)
index 0000000..6825037
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,12 @@ menuconfig PHYLIB
+ if PHYLIB
++config SWCONFIG
++      tristate "Switch configuration API"
++      ---help---
++        Switch configuration API using netlink. This allows
++        you to configure the VLAN features of certain switches.
++
+ comment "MII PHY device drivers"
+ config MARVELL_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs                   := phy.o phy_device.o mdio_bus.o
+ obj-$(CONFIG_PHYLIB)          += libphy.o
++obj-$(CONFIG_SWCONFIG)                += swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)     += marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)     += davicom.o
+ obj-$(CONFIG_CICADA_PHY)      += cicada.o