[ar7] refresh patches

SVN-Revision: 16156

diff --git a/target/linux/ar7/patches-2.6.27/100-board_support.patch b/target/linux/ar7/patches-2.6.27/100-board_support.patch
index 2708f756578d5505753e193f5a4437aebb78551e..58bd909fbc2027cf5127720b35d1b96e1e2655e3 100644 (file)
--- a/target/linux/ar7/patches-2.6.27/100-board_support.patch
+++ b/target/linux/ar7/patches-2.6.27/100-board_support.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -18,6 +18,24 @@ choice
+@@ -19,6 +19,24 @@ choice
        prompt "System type"
        default SGI_IP22
  
@@ -27,7 +27,7 @@
  
 --- a/arch/mips/kernel/traps.c
 +++ b/arch/mips/kernel/traps.c
-@@ -1188,9 +1188,22 @@ void *set_except_vector(int n, void *add
+@@ -1203,9 +1203,22 @@ void *set_except_vector(int n, void *add
  
        exception_handlers[n] = handler;
        if (n == 0 && cpu_has_divec) {

diff --git a/target/linux/ar7/patches-2.6.27/110-flash.patch b/target/linux/ar7/patches-2.6.27/110-flash.patch
index 43e0c93fa94525a4045b907327da3de0ce49540c..60c7f335d5cb196c8c492b9021eebf73fcd628eb 100644 (file)
--- a/target/linux/ar7/patches-2.6.27/110-flash.patch
+++ b/target/linux/ar7/patches-2.6.27/110-flash.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -190,6 +190,12 @@ config MTD_MYLOADER_PARTS
+@@ -188,6 +188,12 @@ config MTD_MYLOADER_PARTS
          You will still need the parsing functions to be called by the driver
          for your particular device. It won't happen automatically.
  
@@ -15,7 +15,7 @@
  config MTD_CHAR
 --- a/drivers/mtd/maps/physmap.c
 +++ b/drivers/mtd/maps/physmap.c
-@@ -87,7 +87,7 @@ static int physmap_flash_remove(struct p
+@@ -85,7 +85,7 @@ static int physmap_flash_remove(struct p
  
  static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
  #ifdef CONFIG_MTD_PARTITIONS

diff --git a/target/linux/ar7/patches-2.6.27/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.27/120-gpio_chrdev.patch
index dfda2310e2246ad288484980221fb84361ff855c..5df86ee6dbc2e575d583d3e307846cec4e45aa30 100644 (file)
--- a/target/linux/ar7/patches-2.6.27/120-gpio_chrdev.patch
+++ b/target/linux/ar7/patches-2.6.27/120-gpio_chrdev.patch
@@ -1,6 +1,6 @@
 --- a/drivers/char/Kconfig
 +++ b/drivers/char/Kconfig
-@@ -960,6 +960,15 @@ config MWAVE
+@@ -968,6 +968,15 @@ config MWAVE
          To compile this driver as a module, choose M here: the
          module will be called mwave.
  
@@ -18,7 +18,7 @@
        depends on SCx200
 --- a/drivers/char/Makefile
 +++ b/drivers/char/Makefile
-@@ -91,6 +91,7 @@ obj-$(CONFIG_COBALT_LCD)     += lcd.o
+@@ -90,6 +90,7 @@ obj-$(CONFIG_HW_RANDOM)              += hw_random/
  obj-$(CONFIG_PPDEV)           += ppdev.o
  obj-$(CONFIG_NWBUTTON)                += nwbutton.o
  obj-$(CONFIG_NWFLASH)         += nwflash.o

diff --git a/target/linux/ar7/patches-2.6.27/130-vlynq.patch b/target/linux/ar7/patches-2.6.27/130-vlynq.patch
index 41940b3b537dc4b0988242c0d949065ea309bb20..9ab3638eaa18ff80e96264a5892c73f343a9f7e1 100644 (file)
--- a/target/linux/ar7/patches-2.6.27/130-vlynq.patch
+++ b/target/linux/ar7/patches-2.6.27/130-vlynq.patch
@@ -10,10 +10,11 @@
  endmenu
 --- a/drivers/Makefile
 +++ b/drivers/Makefile
-@@ -92,5 +92,6 @@ obj-$(CONFIG_DCA)            += dca/
+@@ -96,6 +96,7 @@ obj-$(CONFIG_DCA)            += dca/
  obj-$(CONFIG_HID)             += hid/
  obj-$(CONFIG_PPC_PS3)         += ps3/
  obj-$(CONFIG_OF)              += of/
 +obj-$(CONFIG_VLYNQ)           += vlynq/
  obj-$(CONFIG_SSB)             += ssb/
  obj-$(CONFIG_VIRTIO)          += virtio/
+ obj-$(CONFIG_REGULATOR)               += regulator/

diff --git a/target/linux/ar7/patches-2.6.27/150-cpmac_not_broken.patch b/target/linux/ar7/patches-2.6.27/150-cpmac_not_broken.patch
index 423a147de17cd6b86ccf9e828052c85233178610..e43369bdec006adbd5a4fc67367d821746298a10 100644 (file)
--- a/target/linux/ar7/patches-2.6.27/150-cpmac_not_broken.patch
+++ b/target/linux/ar7/patches-2.6.27/150-cpmac_not_broken.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -1867,7 +1867,7 @@ config SC92031
+@@ -1823,7 +1823,7 @@ config SC92031
  
  config CPMAC
        tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"

diff --git a/target/linux/ar7/patches-2.6.27/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.27/500-serial_kludge.patch
index 6ce59edf2cf4b4078f8da023c5365c00fe80bc8c..e7a4b24472f115381fa5e45f62bfa65f3b29c1f2 100644 (file)
--- a/target/linux/ar7/patches-2.6.27/500-serial_kludge.patch
+++ b/target/linux/ar7/patches-2.6.27/500-serial_kludge.patch
@@ -1,6 +1,6 @@
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -266,6 +266,13 @@ static const struct serial8250_config ua
+@@ -264,6 +264,13 @@ static const struct serial8250_config ua
                .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
                .flags          = UART_CAP_FIFO,
        },
@@ -14,7 +14,7 @@
  };
  
  #if defined (CONFIG_SERIAL_8250_AU1X00)
-@@ -2524,7 +2531,11 @@ static void serial8250_console_putchar(s
+@@ -2552,7 +2559,11 @@ static void serial8250_console_putchar(s
  {
        struct uart_8250_port *up = (struct uart_8250_port *)port;
  

diff --git a/target/linux/ar7/patches-2.6.27/900-cpmac_multiqueue.patch b/target/linux/ar7/patches-2.6.27/900-cpmac_multiqueue.patch
index 1484e2b5fda4e7828b1f102cebcd5c0362380351..c604aa4c3f56905773a26733d0a7c8648a1ae6c0 100644 (file)
--- a/target/linux/ar7/patches-2.6.27/900-cpmac_multiqueue.patch
+++ b/target/linux/ar7/patches-2.6.27/900-cpmac_multiqueue.patch
@@ -19,7 +19,7 @@ because other drivers do it in the same way.
 
 --- a/drivers/net/cpmac.c
 +++ b/drivers/net/cpmac.c
-@@ -621,13 +621,13 @@
+@@ -621,13 +621,13 @@ static void cpmac_end_xmit(struct net_de
  
                dev_kfree_skb_irq(desc->skb);
                desc->skb = NULL;
@@ -35,7 +35,7 @@ because other drivers do it in the same way.
                        netif_wake_subqueue(dev, queue);
        }
  }
-@@ -737,7 +737,6 @@
+@@ -737,7 +737,6 @@ static void cpmac_clear_tx(struct net_de
  
  static void cpmac_hw_error(struct work_struct *work)
  {
@@ -43,7 +43,7 @@ because other drivers do it in the same way.
        struct cpmac_priv *priv =
                container_of(work, struct cpmac_priv, reset_work);
  
-@@ -824,7 +823,6 @@
+@@ -824,7 +823,6 @@ static irqreturn_t cpmac_irq(int irq, vo
  
  static void cpmac_tx_timeout(struct net_device *dev)
  {
@@ -51,7 +51,7 @@ because other drivers do it in the same way.
        struct cpmac_priv *priv = netdev_priv(dev);
  
        spin_lock(&priv->lock);
-@@ -1103,7 +1101,7 @@
+@@ -1103,7 +1101,7 @@ static int external_switch;
  
  static int __devinit cpmac_probe(struct platform_device *pdev)
  {
@@ -60,7 +60,7 @@ because other drivers do it in the same way.
        char *mdio_bus_id = "0";
        struct resource *mem;
        struct cpmac_priv *priv;
-@@ -1132,6 +1130,7 @@
+@@ -1132,6 +1130,7 @@ static int __devinit cpmac_probe(struct 
        }
  
        dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);

diff --git a/target/linux/generic-2.6/patches-2.6.27/801-usb_serial_endpoint_size.patch b/target/linux/generic-2.6/patches-2.6.27/801-usb_serial_endpoint_size.patch
index 78681d2b4a53ebf74edcca571bddb9ce83fc6a63..e96e01cd556da2ac7338661ef3b895b3aa36d3ac 100644 (file)
--- a/target/linux/generic-2.6/patches-2.6.27/801-usb_serial_endpoint_size.patch
+++ b/target/linux/generic-2.6/patches-2.6.27/801-usb_serial_endpoint_size.patch
@@ -8,7 +8,7 @@
  static int debug;
  /* initially all NULL */
  static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
-@@ -856,7 +857,7 @@ int usb_serial_probe(struct usb_interfac
+@@ -835,7 +836,7 @@ int usb_serial_probe(struct usb_interfac
                        dev_err(&interface->dev, "No free urbs available\n");
                        goto probe_error;
                }
@@ -17,7 +17,7 @@
                port->bulk_in_size = buffer_size;
                port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
                port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
-@@ -1292,3 +1293,5 @@ MODULE_LICENSE("GPL");
+@@ -1255,3 +1256,5 @@ MODULE_LICENSE("GPL");
  
  module_param(debug, bool, S_IRUGO | S_IWUSR);
  MODULE_PARM_DESC(debug, "Debug enabled or not");