This is just compile tested, my device is currently not working.
SVN-Revision: 31706
BOARD:=amazon
BOARDNAME:=Infineon Amazon
FEATURES:=squashfs jffs2 broken
-LINUX_VERSION:=2.6.37.6
+LINUX_VERSION:=3.3.5
include $(INCLUDE_DIR)/target.mk
+++ /dev/null
-CONFIG_ADM6996_SUPPORT=y
-CONFIG_AMAZON=y
-CONFIG_AMAZON_ASC_UART=y
-CONFIG_AMAZON_MTD=y
-CONFIG_AMAZON_NET_SW=y
-CONFIG_AMAZON_PCI=y
-CONFIG_AMAZON_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_AUTO_IRQ_AFFINITY is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_OVERRIDE=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_GENERIC_PENDING_IRQ is not set
-# CONFIG_HARDIRQS_SW_RESEND is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-# CONFIG_HAVE_SPARSE_IRQ is not set
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_IRQ_PER_CPU is not set
-CONFIG_KALLSYMS=y
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
-# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
-# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
-CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
-# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-# CONFIG_NET_PCI is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+CONFIG_ADM6996_SUPPORT=y
+CONFIG_AMAZON=y
+CONFIG_AMAZON_ASC_UART=y
+CONFIG_AMAZON_MTD=y
+CONFIG_AMAZON_NET_SW=y
+CONFIG_AMAZON_PCI=y
+CONFIG_AMAZON_WDT=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERRIDE=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_KALLSYMS=y
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MLX4_CORE is not set
+CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
+# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
+# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
+# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
+# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
+CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
+# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
#include <asm/irq.h>
#include <asm/time.h>
-static void amazon_disable_irq(unsigned int irq_nr)
+static void amazon_disable_irq(struct irq_data *d)
{
int i;
u32 amazon_ier = AMAZON_ICU_IM0_IER;
+ unsigned int irq_nr = d->irq;
if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0)
amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier);
}
}
-static void amazon_mask_and_ack_irq(unsigned int irq_nr)
+static void amazon_mask_and_ack_irq(struct irq_data *d)
{
int i;
u32 amazon_ier = AMAZON_ICU_IM0_IER;
u32 amazon_isr = AMAZON_ICU_IM0_ISR;
+ unsigned int irq_nr = d->irq;
if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0){
amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier);
}
}
-static void amazon_enable_irq(unsigned int irq_nr)
+static void amazon_enable_irq(struct irq_data *d)
{
int i;
u32 amazon_ier = AMAZON_ICU_IM0_IER;
+ unsigned int irq_nr = d->irq;
if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0)
amazon_writel(amazon_readl(amazon_ier) | AMAZON_DMA_H_MASK, amazon_ier);
}
}
-static unsigned int amazon_startup_irq(unsigned int irq)
+static unsigned int amazon_startup_irq(struct irq_data *d)
{
- amazon_enable_irq(irq);
+ amazon_enable_irq(d);
return 0;
}
-static void amazon_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
- amazon_enable_irq(irq);
- }
-}
-
static struct irq_chip amazon_irq_type = {
.name = "AMAZON",
- .startup = amazon_startup_irq,
- .enable = amazon_enable_irq,
- .disable = amazon_disable_irq,
- .unmask = amazon_enable_irq,
- .ack = amazon_mask_and_ack_irq,
- .mask = amazon_disable_irq,
- .mask_ack = amazon_mask_and_ack_irq,
- .end = amazon_end_irq
+ .irq_startup = amazon_startup_irq,
+ .irq_enable = amazon_enable_irq,
+ .irq_disable = amazon_disable_irq,
+ .irq_unmask = amazon_enable_irq,
+ .irq_ack = amazon_mask_and_ack_irq,
+ .irq_mask = amazon_disable_irq,
+ .irq_mask_ack = amazon_mask_and_ack_irq,
};
/* Cascaded interrupts from IM0-4 */
}
for (i = INT_NUM_IRQ0; i <= INT_NUM_IM4_IRL31; i++)
- set_irq_chip_and_handler(i, &amazon_irq_type,
+ irq_set_chip_and_handler(i, &amazon_irq_type,
handle_level_irq);
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
return temp + 0x40;
}
-static int __init amazon_mtd_probe(struct platform_device *dev)
+static int amazon_mtd_probe(struct platform_device *dev)
{
unsigned long uimage_size;
struct mtd_info *mymtd = NULL;
amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - (2 * mymtd->erasesize);
}
- add_mtd_partitions(mymtd, parts, 3);
+ mtd_device_register(mymtd, parts, 3);
printk(KERN_INFO "amazon_mtd: added %s flash with %dMB\n",
amazon_map.name, ((int)mymtd->size) >> 20);
+++ /dev/null
-/******************************************************************************
- Copyright (c) 2004, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
- ******************************************************************************
- Module : admmod.c
- Date : 2004-09-01
- Description : JoeLin
- Remarks:
-
- Revision:
- MarsLin, add to support VLAN
-
- *****************************************************************************/
-//000001.joelin 2005/06/02 add"ADM6996_MDC_MDIO_MODE" define,
-// if define ADM6996_MDC_MDIO_MODE==> ADM6996LC and ADM6996I will be in MDIO/MDC(SMI)(16 bit) mode,
-// amazon should contrl ADM6996 by MDC/MDIO pin
-// if undef ADM6996_MDC_MDIO_MODE==> ADM6996 will be in EEProm(32 bit) mode,
-// amazon should contrl ADM6996 by GPIO15,16,17,18 pin
-/* 507281:linmars 2005/07/28 support MDIO/EEPROM config mode */
-/* 509201:linmars remove driver testing codes */
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/proc_fs.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include <linux/init.h>
-#include <linux/ioctl.h>
-#include <asm/atomic.h>
-#include <asm-mips/amazon/amazon.h>
-#include <asm-mips/amazon/adm6996.h>
-//#include <linux/amazon/adm6996.h>
-
-
-unsigned int ifx_sw_conf[ADM_SW_MAX_PORT_NUM+1] = \
- {ADM_SW_PORT0_CONF, ADM_SW_PORT1_CONF, ADM_SW_PORT2_CONF, \
- ADM_SW_PORT3_CONF, ADM_SW_PORT4_CONF, ADM_SW_PORT5_CONF};
-unsigned int ifx_sw_bits[8] = \
- {0x1, 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff};
-unsigned int ifx_sw_vlan_port[6] = {0, 2, 4, 6, 7, 8};
-//050613:fchang
-/* 507281:linmars start */
-#ifdef CONFIG_SWITCH_ADM6996_MDIO
-#define ADM6996_MDC_MDIO_MODE 1 //000001.joelin
-#else
-#undef ADM6996_MDC_MDIO_MODE
-#endif
-/* 507281:linmars end */
-#define adm6996i 0
-#define adm6996lc 1
-#define adm6996l 2
-unsigned int adm6996_mode=adm6996i;
-/*
- initialize GPIO pins.
- output mode, low
-*/
-void ifx_gpio_init(void)
-{
- //GPIO16,17,18 direction:output
- //GPIO16,17,18 output 0
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_DIR) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT) =AMAZON_SW_REG(AMAZON_GPIO_P1_IN)& ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-
-}
-
-/* read one bit from mdio port */
-int ifx_sw_mdio_readbit(void)
-{
- //int val;
-
- //val = (AMAZON_SW_REG(GPIO_conf0_REG) & GPIO0_INPUT_MASK) >> 8;
- //return val;
- //GPIO16
- return AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&1;
-}
-
-/*
- MDIO mode selection
- 1 -> output
- 0 -> input
-
- switch input/output mode of GPIO 0
-*/
-void ifx_mdio_mode(int mode)
-{
-// AMAZON_SW_REG(GPIO_conf0_REG) = mode ? GPIO_ENABLEBITS :
-// ((GPIO_ENABLEBITS | MDIO_INPUT) & ~MDIO_OUTPUT_EN);
- mode?(AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)|=GPIO_MDIO):
- (AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)&=~GPIO_MDIO);
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_DIR);
- mode?(r|=GPIO_MDIO):(r&=~GPIO_MDIO);
- AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)=r;*/
-}
-
-void ifx_mdc_hi(void)
-{
- //GPIO_SET_HI(GPIO_MDC);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDC;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r|=GPIO_MDC;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDC;
-}
-
-void ifx_mdio_hi(void)
-{
- //GPIO_SET_HI(GPIO_MDIO);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDIO;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r|=GPIO_MDIO;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDIO;
-}
-
-void ifx_mdcs_hi(void)
-{
- //GPIO_SET_HI(GPIO_MDCS);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDCS;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r|=GPIO_MDCS;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDCS;
-}
-
-void ifx_mdc_lo(void)
-{
- //GPIO_SET_LOW(GPIO_MDC);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDC;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r&=~GPIO_MDC;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDC);
-}
-
-void ifx_mdio_lo(void)
-{
- //GPIO_SET_LOW(GPIO_MDIO);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDIO;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r&=~GPIO_MDIO;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDIO);
-}
-
-void ifx_mdcs_lo(void)
-{
- //GPIO_SET_LOW(GPIO_MDCS);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDCS;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r&=~GPIO_MDCS;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDCS);
-}
-
-/*
- mdc pulse
- 0 -> 1 -> 0
-*/
-static void ifx_sw_mdc_pulse(void)
-{
- ifx_mdc_lo();
- udelay(ADM_SW_MDC_DOWN_DELAY);
- ifx_mdc_hi();
- udelay(ADM_SW_MDC_UP_DELAY);
- ifx_mdc_lo();
-}
-
-/*
- mdc toggle
- 1 -> 0
-*/
-static void ifx_sw_mdc_toggle(void)
-{
- ifx_mdc_hi();
- udelay(ADM_SW_MDC_UP_DELAY);
- ifx_mdc_lo();
- udelay(ADM_SW_MDC_DOWN_DELAY);
-}
-
-/*
- enable eeprom write
- For ATC 93C66 type EEPROM; accessing ADM6996 internal EEPROM type registers
-*/
-static void ifx_sw_eeprom_write_enable(void)
-{
- unsigned int op;
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_hi();
- udelay(ADM_SW_CS_DELAY);
- /* enable chip select */
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
- /* start bit */
- ifx_mdio_hi();
- ifx_sw_mdc_pulse();
-
- /* eeprom write enable */
- op = ADM_SW_BIT_MASK_4;
- while (op)
- {
- if (op & ADM_SW_EEPROM_WRITE_ENABLE)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
- while (op)
- {
- ifx_mdio_lo();
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
- /* disable chip select */
- ifx_mdcs_lo();
- udelay(ADM_SW_CS_DELAY);
- ifx_sw_mdc_pulse();
-}
-
-/*
- disable eeprom write
-*/
-static void ifx_sw_eeprom_write_disable(void)
-{
- unsigned int op;
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_hi();
- udelay(ADM_SW_CS_DELAY);
- /* enable chip select */
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- /* start bit */
- ifx_mdio_hi();
- ifx_sw_mdc_pulse();
- /* eeprom write disable */
- op = ADM_SW_BIT_MASK_4;
- while (op)
- {
- if (op & ADM_SW_EEPROM_WRITE_DISABLE)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
- while (op)
- {
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
- /* disable chip select */
- ifx_mdcs_lo();
- udelay(ADM_SW_CS_DELAY);
- ifx_sw_mdc_pulse();
-}
-
-/*
- read registers from ADM6996
- serial registers start at 0x200 (addr bit 9 = 1b)
- EEPROM registers -> 16bits; Serial registers -> 32bits
-*/
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode//000001.joelin
-static int ifx_sw_read_adm6996i_smi(unsigned int addr, unsigned int *dat)
-{
- addr=(addr<<16)&0x3ff0000;
- AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) =(0xC0000000|addr);
- while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
- *dat=((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x0FFFF);
- return 0;
-}
-#endif
-
-static int ifx_sw_read_adm6996i(unsigned int addr, unsigned int *dat)
-{
- unsigned int op;
-
- ifx_gpio_init();
-
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_lo();
-
- udelay(ADM_SW_CS_DELAY);
-
- /* preamble, 32 bit 1 */
- ifx_mdio_hi();
- op = ADM_SW_BIT_MASK_32;
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* command start (01b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_START)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* read command (10b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_READ)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* send address A9 ~ A0 */
- op = ADM_SW_BIT_MASK_10;
- while (op)
- {
- if (op & addr)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* turnaround bits */
- op = ADM_SW_BIT_MASK_2;
- ifx_mdio_hi();
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- udelay(ADM_SW_MDC_DOWN_DELAY);
-
- /* set MDIO pin to input mode */
- ifx_mdio_mode(ADM_SW_MDIO_INPUT);
-
- /* start read data */
- *dat = 0;
-//adm6996i op = ADM_SW_BIT_MASK_32;
- op = ADM_SW_BIT_MASK_16;//adm6996i
- while (op)
- {
- *dat <<= 1;
- if (ifx_sw_mdio_readbit()) *dat |= 1;
- ifx_sw_mdc_toggle();
-
- op >>= 1;
- }
-
- /* set MDIO to output mode */
- ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
- /* dummy clock */
- op = ADM_SW_BIT_MASK_4;
- ifx_mdio_lo();
- while(op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- ifx_mdc_lo();
- ifx_mdio_lo();
- ifx_mdcs_hi();
-
- /* EEPROM registers */
-//adm6996i if (!(addr & 0x200))
-//adm6996i {
-//adm6996i if (addr % 2)
-//adm6996i *dat >>= 16;
-//adm6996i else
-//adm6996i *dat &= 0xffff;
-//adm6996i }
-
- return 0;
-}
-//adm6996
-static int ifx_sw_read_adm6996l(unsigned int addr, unsigned int *dat)
-{
- unsigned int op;
-
- ifx_gpio_init();
-
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_lo();
-
- udelay(ADM_SW_CS_DELAY);
-
- /* preamble, 32 bit 1 */
- ifx_mdio_hi();
- op = ADM_SW_BIT_MASK_32;
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* command start (01b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_START)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* read command (10b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_READ)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* send address A9 ~ A0 */
- op = ADM_SW_BIT_MASK_10;
- while (op)
- {
- if (op & addr)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* turnaround bits */
- op = ADM_SW_BIT_MASK_2;
- ifx_mdio_hi();
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- udelay(ADM_SW_MDC_DOWN_DELAY);
-
- /* set MDIO pin to input mode */
- ifx_mdio_mode(ADM_SW_MDIO_INPUT);
-
- /* start read data */
- *dat = 0;
- op = ADM_SW_BIT_MASK_32;
- while (op)
- {
- *dat <<= 1;
- if (ifx_sw_mdio_readbit()) *dat |= 1;
- ifx_sw_mdc_toggle();
-
- op >>= 1;
- }
-
- /* set MDIO to output mode */
- ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
- /* dummy clock */
- op = ADM_SW_BIT_MASK_4;
- ifx_mdio_lo();
- while(op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- ifx_mdc_lo();
- ifx_mdio_lo();
- ifx_mdcs_hi();
-
- /* EEPROM registers */
- if (!(addr & 0x200))
- {
- if (addr % 2)
- *dat >>= 16;
- else
- *dat &= 0xffff;
- }
-
- return 0;
-}
-
-static int ifx_sw_read(unsigned int addr, unsigned int *dat)
-{
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
- ifx_sw_read_adm6996i_smi(addr,dat);
-#else
- if (adm6996_mode==adm6996i) ifx_sw_read_adm6996i(addr,dat);
- else ifx_sw_read_adm6996l(addr,dat);
-#endif
- return 0;
-
-}
-
-/*
- write register to ADM6996 eeprom registers
-*/
-//for adm6996i -start
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
-static int ifx_sw_write_adm6996i_smi(unsigned int addr, unsigned int dat)
-{
-
- AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) = ((addr<<16)&0x3ff0000)|dat|0x80000000;
- while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
-
- return 0;
-
-}
-#endif //ADM6996_MDC_MDIO_MODE //000001.joelin
-
-static int ifx_sw_write_adm6996i(unsigned int addr, unsigned int dat)
-{
- unsigned int op;
-
- ifx_gpio_init();
-
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_lo();
-
- udelay(ADM_SW_CS_DELAY);
-
- /* preamble, 32 bit 1 */
- ifx_mdio_hi();
- op = ADM_SW_BIT_MASK_32;
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* command start (01b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_START)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* write command (01b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_WRITE)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* send address A9 ~ A0 */
- op = ADM_SW_BIT_MASK_10;
- while (op)
- {
- if (op & addr)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* turnaround bits */
- op = ADM_SW_BIT_MASK_2;
- ifx_mdio_hi();
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- udelay(ADM_SW_MDC_DOWN_DELAY);
-
- /* set MDIO pin to output mode */
- ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
-
- /* start write data */
- op = ADM_SW_BIT_MASK_16;
- while (op)
- {
- if (op & dat)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_toggle();
- op >>= 1;
- }
-
- // /* set MDIO to output mode */
- // ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
- /* dummy clock */
- op = ADM_SW_BIT_MASK_4;
- ifx_mdio_lo();
- while(op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- ifx_mdc_lo();
- ifx_mdio_lo();
- ifx_mdcs_hi();
-
- /* EEPROM registers */
-//adm6996i if (!(addr & 0x200))
-//adm6996i {
-//adm6996i if (addr % 2)
-//adm6996i *dat >>= 16;
-//adm6996i else
-//adm6996i *dat &= 0xffff;
-//adm6996i }
-
- return 0;
-}
-//for adm6996i-end
-static int ifx_sw_write_adm6996l(unsigned int addr, unsigned int dat)
-{
- unsigned int op;
-
- ifx_gpio_init();
-
- /* enable write */
- ifx_sw_eeprom_write_enable();
-
- /* chip select */
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- /* issue write command */
- /* start bit */
- ifx_mdio_hi();
- ifx_sw_mdc_pulse();
-
- /* EEPROM write command */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_EEPROM_WRITE)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* send address A7 ~ A0 */
- op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 1);
-
- while (op)
- {
- if (op & addr)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_toggle();
- op >>= 1;
- }
-
- /* start write data */
- op = ADM_SW_BIT_MASK_16;
- while (op)
- {
- if (op & dat)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_toggle();
- op >>= 1;
- }
-
- /* disable cs & wait 1 clock */
- ifx_mdcs_lo();
- udelay(ADM_SW_CS_DELAY);
- ifx_sw_mdc_toggle();
-
- ifx_sw_eeprom_write_disable();
-
- return 0;
-}
-
-static int ifx_sw_write(unsigned int addr, unsigned int dat)
-{
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
- ifx_sw_write_adm6996i_smi(addr,dat);
-#else //000001.joelin
- if (adm6996_mode==adm6996i) ifx_sw_write_adm6996i(addr,dat);
- else ifx_sw_write_adm6996l(addr,dat);
-#endif //000001.joelin
- return 0;
-}
-
-/*
- do switch PHY reset
-*/
-int ifx_sw_reset(void)
-{
- /* reset PHY */
- ifx_sw_write(ADM_SW_PHY_RESET, 0);
-
- return 0;
-}
-
-/* 509201:linmars start */
-#if 0
-/*
- check port status
-*/
-int ifx_check_port_status(int port)
-{
- unsigned int val;
-
- if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM))
- {
- ifx_printf(("error on port number (%d)!!\n", port));
- return -1;
- }
-
- ifx_sw_read(ifx_sw_conf[port], &val);
- if (ifx_sw_conf[port]%2) val >>= 16;
- /* only 16bits are effective */
- val &= 0xFFFF;
-
- ifx_printf(("Port %d status (%.8x): \n", port, val));
-
- if (val & ADM_SW_PORT_FLOWCTL)
- ifx_printf(("\t802.3x flow control supported!\n"));
- else
- ifx_printf(("\t802.3x flow control not supported!\n"));
-
- if (val & ADM_SW_PORT_AN)
- ifx_printf(("\tAuto negotiation ON!\n"));
- else
- ifx_printf(("\tAuto negotiation OFF!\n"));
-
- if (val & ADM_SW_PORT_100M)
- ifx_printf(("\tLink at 100M!\n"));
- else
- ifx_printf(("\tLink at 10M!\n"));
-
- if (val & ADM_SW_PORT_FULL)
- ifx_printf(("\tFull duplex!\n"));
- else
- ifx_printf(("\tHalf duplex!\n"));
-
- if (val & ADM_SW_PORT_DISABLE)
- ifx_printf(("\tPort disabled!\n"));
- else
- ifx_printf(("\tPort enabled!\n"));
-
- if (val & ADM_SW_PORT_TOS)
- ifx_printf(("\tTOS enabled!\n"));
- else
- ifx_printf(("\tTOS disabled!\n"));
-
- if (val & ADM_SW_PORT_PPRI)
- ifx_printf(("\tPort priority first!\n"));
- else
- ifx_printf(("\tVLAN or TOS priority first!\n"));
-
- if (val & ADM_SW_PORT_MDIX)
- ifx_printf(("\tAuto MDIX!\n"));
- else
- ifx_printf(("\tNo auto MDIX\n"));
-
- ifx_printf(("\tPVID: %d\n", \
- ((val >> ADM_SW_PORT_PVID_SHIFT)&ifx_sw_bits[ADM_SW_PORT_PVID_BITS])));
-
- return 0;
-}
-/*
- initialize a VLAN
- clear all VLAN bits
-*/
-int ifx_sw_vlan_init(int vlanid)
-{
- ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, 0);
-
- return 0;
-}
-
-/*
- add a port to certain vlan
-*/
-int ifx_sw_vlan_add(int port, int vlanid)
-{
- int reg = 0;
-
- if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) ||
- (vlanid > ADM_SW_MAX_VLAN_NUM))
- {
- ifx_printf(("Port number or VLAN number ERROR!!\n"));
- return -1;
- }
- ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®);
- reg |= (1 << ifx_sw_vlan_port[port]);
- ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
-
- return 0;
-}
-
-/*
- delete a given port from certain vlan
-*/
-int ifx_sw_vlan_del(int port, int vlanid)
-{
- unsigned int reg = 0;
-
- if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || (vlanid > ADM_SW_MAX_VLAN_NUM))
- {
- ifx_printf(("Port number or VLAN number ERROR!!\n"));
- return -1;
- }
- ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®);
- reg &= ~(1 << ifx_sw_vlan_port[port]);
- ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
-
- return 0;
-}
-
-/*
- default VLAN setting
-
- port 0~3 as untag port and PVID = 1
- VLAN1: port 0~3 and port 5 (MII)
-*/
-static int ifx_sw_init(void)
-{
- ifx_printf(("Setting default ADM6996 registers... \n"));
-
- /* MAC clone, 802.1q based VLAN */
- ifx_sw_write(ADM_SW_VLAN_MODE, 0xff30);
- /* auto MDIX, PVID=1, untag */
- ifx_sw_write(ADM_SW_PORT0_CONF, 0x840f);
- ifx_sw_write(ADM_SW_PORT1_CONF, 0x840f);
- ifx_sw_write(ADM_SW_PORT2_CONF, 0x840f);
- ifx_sw_write(ADM_SW_PORT3_CONF, 0x840f);
- /* auto MDIX, PVID=2, untag */
- ifx_sw_write(ADM_SW_PORT5_CONF, 0x880f);
- /* port 0~3 & 5 as VLAN1 */
- ifx_sw_write(ADM_SW_VLAN0_CONF+1, 0x0155);
-
- return 0;
-}
-#endif
-/* 509201:linmars end */
-
-int adm_open(struct inode *node, struct file *filp)
-{
- return 0;
-}
-
-ssize_t adm_read(struct file *filep, char *buf, size_t count, loff_t *ppos)
-{
- return count;
-}
-
-ssize_t adm_write(struct file *filep, const char *buf, size_t count, loff_t *ppos)
-{
- return count;
-}
-
-/* close */
-int adm_release(struct inode *inode, struct file *filp)
-{
- return 0;
-}
-
-/* IOCTL function */
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-static long adm_ioctl(struct file *filp, unsigned int cmd, unsigned long args)
-#else
-static int adm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long args)
-#endif
-{
- PREGRW uREGRW;
- unsigned int rtval;
- unsigned int val; //6996i
- unsigned int control[6] ; //6996i
- unsigned int status[6] ; //6996i
-
- PMACENTRY mMACENTRY;//adm6996i
- PPROTOCOLFILTER uPROTOCOLFILTER ;///adm6996i
-
- if (_IOC_TYPE(cmd) != ADM_MAGIC)
- {
- printk("adm_ioctl: IOC_TYPE(%x) != ADM_MAGIC(%x)! \n", _IOC_TYPE(cmd), ADM_MAGIC);
- return (-EINVAL);
- }
-
- if(_IOC_NR(cmd) >= KEY_IOCTL_MAX_KEY)
- {
- printk(KERN_WARNING "adm_ioctl: IOC_NR(%x) invalid! \n", _IOC_NR(cmd));
- return (-EINVAL);
- }
-
- switch (cmd)
- {
- case ADM_IOCTL_REGRW:
- {
- uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
- rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
- if (rtval != 0)
- {
- printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
- return (-EFAULT);
- }
-
- switch(uREGRW->mode)
- {
- case REG_READ:
- uREGRW->value = 0x12345678;//inl(uREGRW->addr);
- copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
- break;
- case REG_WRITE:
- //outl(uREGRW->value, uREGRW->addr);
- break;
-
- default:
- printk("No such Register Read/Write function!! \n");
- return (-EFAULT);
- }
- kfree(uREGRW);
- break;
- }
-
- case ADM_SW_IOCTL_REGRW:
- {
- unsigned int val = 0xff;
-
- uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
- rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
- if (rtval != 0)
- {
- printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
- return (-EFAULT);
- }
-
- switch(uREGRW->mode)
- {
- case REG_READ:
- ifx_sw_read(uREGRW->addr, &val);
- uREGRW->value = val;
- copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
- break;
-
- case REG_WRITE:
- ifx_sw_write(uREGRW->addr, uREGRW->value);
- break;
- default:
- printk("No such Register Read/Write function!! \n");
- return (-EFAULT);
- }
- kfree(uREGRW);
- break;
- }
-/* 509201:linmars start */
-#if 0
- case ADM_SW_IOCTL_PORTSTS:
- for (rtval = 0; rtval < ADM_SW_MAX_PORT_NUM+1; rtval++)
- ifx_check_port_status(rtval);
- break;
- case ADM_SW_IOCTL_INIT:
- ifx_sw_init();
- break;
-#endif
-/* 509201:linmars end */
-//adm6996i
- case ADM_SW_IOCTL_MACENTRY_ADD:
- case ADM_SW_IOCTL_MACENTRY_DEL:
- case ADM_SW_IOCTL_MACENTRY_GET_INIT:
- case ADM_SW_IOCTL_MACENTRY_GET_MORE:
-
-
- mMACENTRY = (PMACENTRY)kmalloc(sizeof(MACENTRY), GFP_KERNEL);
- rtval = copy_from_user(mMACENTRY, (PMACENTRY)args, sizeof(MACENTRY));
- if (rtval != 0)
- {
- printk("ADM_SW_IOCTL_MACENTRY: copy from user FAILED!! \n");
- return (-EFAULT);
- }
- control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ;
- control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ;
- control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ;
- control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
- if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
- else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
- if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {
- //initial the pointer to the first address
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- control[5]=0x030;//initial the first address
- ifx_sw_write(0x11f,control[5]);
-
-
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
-
- } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)
- if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
- else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
- else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
- control[5]=0x02c;//search by the mac address field
-
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- ifx_sw_write(0x11a,control[0]);
- ifx_sw_write(0x11b,control[1]);
- ifx_sw_write(0x11c,control[2]);
- ifx_sw_write(0x11d,control[3]);
- ifx_sw_write(0x11e,control[4]);
- ifx_sw_write(0x11f,control[5]);
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- val=((val&0x7000)>>12);//result ,status5[14:12]
- mMACENTRY->result=val;
-
- if (!val) {
- printk(" Command OK!! \n");
- if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
- ifx_sw_read(0x120,&(status[0]));
- ifx_sw_read(0x121,&(status[1]));
- ifx_sw_read(0x122,&(status[2]));
- ifx_sw_read(0x123,&(status[3]));
- ifx_sw_read(0x124,&(status[4]));
- ifx_sw_read(0x125,&(status[5]));
-
-
- mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ;
- mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ;
- mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ;
- mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
- mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ;
- mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
- mMACENTRY->fid=(status[3]&0xf);
- mMACENTRY->portmap=((status[3]>>4)&0x3f);
- if (status[5]&0x2) {//static info_ctrl //status5[1]????
- mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
- mMACENTRY->info_type=1;
- }
- else {//not static age_timer
- mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
- mMACENTRY->info_type=0;
- }
-//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
- mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
- mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
- }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
-
- }
- else if (val==0x001)
- printk(" All Entry Used!! \n");
- else if (val==0x002)
- printk(" Entry Not Found!! \n");
- else if (val==0x003)
- printk(" Try Next Entry!! \n");
- else if (val==0x005)
- printk(" Command Error!! \n");
- else
- printk(" UnKnown Error!! \n");
-
- copy_to_user((PMACENTRY)args, mMACENTRY,sizeof(MACENTRY));
-
- break;
-
- case ADM_SW_IOCTL_FILTER_ADD:
- case ADM_SW_IOCTL_FILTER_DEL:
- case ADM_SW_IOCTL_FILTER_GET:
-
- uPROTOCOLFILTER = (PPROTOCOLFILTER)kmalloc(sizeof(PROTOCOLFILTER), GFP_KERNEL);
- rtval = copy_from_user(uPROTOCOLFILTER, (PPROTOCOLFILTER)args, sizeof(PROTOCOLFILTER));
- if (rtval != 0)
- {
- printk("ADM_SW_IOCTL_FILTER_ADD: copy from user FAILED!! \n");
- return (-EFAULT);
- }
-
- if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter
- uPROTOCOLFILTER->ip_p=00; //delet filter
- uPROTOCOLFILTER->action=00; //delete filter
- } //delete filter
-
- ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7
-
- if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){
- if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
- else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
- }
- else {
- if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
- else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
- }
- if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7
-
- ifx_sw_read(0x95, &val); //protocol filter action
- if(cmd==ADM_SW_IOCTL_FILTER_GET) {
- uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
- copy_to_user((PPROTOCOLFILTER)args, uPROTOCOLFILTER, sizeof(PROTOCOLFILTER));
-
- }
- else {
- val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
- // printk("%d----\n",val);
- ifx_sw_write(0x95, val); //write protocol filter action
- }
-
- break;
-//adm6996i
-
- /* others */
- default:
- return -EFAULT;
- }
- /* end of switch */
- return 0;
-}
-
-/* Santosh: handle IGMP protocol filter ADD/DEL/GET */
-int adm_process_protocol_filter_request (unsigned int cmd, PPROTOCOLFILTER uPROTOCOLFILTER)
-{
- unsigned int val; //6996i
-
- if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter
- uPROTOCOLFILTER->ip_p=00; //delet filter
- uPROTOCOLFILTER->action=00; //delete filter
- } //delete filter
-
- ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7
-
- if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){
- if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
- else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
- }
- else {
- if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
- else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
- }
- if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7
-
- ifx_sw_read(0x95, &val); //protocol filter action
- if(cmd==ADM_SW_IOCTL_FILTER_GET) {
- uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
- }
- else {
- val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
- ifx_sw_write(0x95, val); //write protocol filter action
- }
-
- return 0;
-}
-
-
-/* Santosh: function for MAC ENTRY ADD/DEL/GET */
-
-int adm_process_mac_table_request (unsigned int cmd, PMACENTRY mMACENTRY)
-{
- unsigned int rtval;
- unsigned int val; //6996i
- unsigned int control[6] ; //6996i
- unsigned int status[6] ; //6996i
-
- // printk ("adm_process_mac_table_request: enter\n");
-
- control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ;
- control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ;
- control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ;
- control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
-
- if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
- else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
- if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {
- //initial the pointer to the first address
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- control[5]=0x030;//initial the first address
- ifx_sw_write(0x11f,control[5]);
-
-
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
-
- } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)
- if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
- else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
- else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
- control[5]=0x02c;//search by the mac address field
-
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- ifx_sw_write(0x11a,control[0]);
- ifx_sw_write(0x11b,control[1]);
- ifx_sw_write(0x11c,control[2]);
- ifx_sw_write(0x11d,control[3]);
- ifx_sw_write(0x11e,control[4]);
- ifx_sw_write(0x11f,control[5]);
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- val=((val&0x7000)>>12);//result ,status5[14:12]
- mMACENTRY->result=val;
-
- if (!val) {
- printk(" Command OK!! \n");
- if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
- ifx_sw_read(0x120,&(status[0]));
- ifx_sw_read(0x121,&(status[1]));
- ifx_sw_read(0x122,&(status[2]));
- ifx_sw_read(0x123,&(status[3]));
- ifx_sw_read(0x124,&(status[4]));
- ifx_sw_read(0x125,&(status[5]));
-
-
- mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ;
- mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ;
- mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ;
- mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
- mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ;
- mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
- mMACENTRY->fid=(status[3]&0xf);
- mMACENTRY->portmap=((status[3]>>4)&0x3f);
- if (status[5]&0x2) {//static info_ctrl //status5[1]????
- mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
- mMACENTRY->info_type=1;
- }
- else {//not static age_timer
- mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
- mMACENTRY->info_type=0;
- }
-//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
- mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
- mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
- }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
-
- }
- else if (val==0x001)
- printk(" All Entry Used!! \n");
- else if (val==0x002)
- printk(" Entry Not Found!! \n");
- else if (val==0x003)
- printk(" Try Next Entry!! \n");
- else if (val==0x005)
- printk(" Command Error!! \n");
- else
- printk(" UnKnown Error!! \n");
-
- // printk ("adm_process_mac_table_request: Exit\n");
- return 0;
-}
-
-/* Santosh: End of function for MAC ENTRY ADD/DEL*/
-struct file_operations adm_ops =
-{
- read: adm_read,
- write: adm_write,
- open: adm_open,
- release: adm_release,
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
- unlocked_ioctl: adm_ioctl
-#else
- ioctl: adm_ioctl
-#endif
-};
-
-int adm_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-{
- int len = 0;
-
- len += sprintf(buf+len, " ************ Registers ************ \n");
- *eof = 1;
- return len;
-}
-
-int __init init_adm6996_module(void)
-{
- unsigned int val = 000;
- unsigned int val1 = 000;
-
- printk("Loading ADM6996 driver... \n");
-
- /* if running on adm5120 */
- /* set GPIO 0~2 as adm6996 control pins */
- //outl(0x003f3f00, 0x12000028);
- /* enable switch port 5 (MII) as RMII mode (5120MAC <-> 6996MAC) */
- //outl(0x18a, 0x12000030);
- /* group adm5120 port 1 ~ 5 as VLAN0, port 5 & 6(CPU) as VLAN1 */
- //outl(0x417e, 0x12000040);
- /* end adm5120 fixup */
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
- register_chrdev(69, "adm6996", &adm_ops);
- AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x27be;
- AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xfc;
- adm6996_mode=adm6996i;
- ifx_sw_read(0xa0, &val);
- ifx_sw_read(0xa1, &val1);
- val=((val1&0x0f)<<16)|val;
- printk ("\nADM6996 SMI Mode-");
- printk ("Chip ID:%5x \n ", val);
-#else //000001.joelin
-
- AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x2c50;
- AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xff;
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL0) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
- AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL1) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
- AMAZON_SW_REG(AMAZON_GPIO_P1_OD) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-
- ifx_gpio_init();
- register_chrdev(69, "adm6996", &adm_ops);
- mdelay(100);
-
- /* create proc entries */
- // create_proc_read_entry("admide", 0, NULL, admide_proc, NULL);
-
-//joelin adm6996i support start
- adm6996_mode=adm6996i;
- ifx_sw_read(0xa0, &val);
- adm6996_mode=adm6996l;
- ifx_sw_read(0x200, &val1);
-// printk ("\n %0x \n",val1);
- if ((val&0xfff0)==0x1020) {
- printk ("\n ADM6996I .. \n");
- adm6996_mode=adm6996i;
- }
- else if ((val1&0xffffff00)==0x71000) {//71010 or 71020
- printk ("\n ADM6996LC .. \n");
- adm6996_mode=adm6996lc;
- }
- else {
- printk ("\n ADM6996L .. \n");
- adm6996_mode=adm6996l;
- }
-#endif //ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
-
- if ((adm6996_mode==adm6996lc)||(adm6996_mode==adm6996i)){
-#if 0 /* removed by MarsLin */
- ifx_sw_write(0x29,0xc000);
- ifx_sw_write(0x30,0x0985);
-#else
- ifx_sw_read(0xa0, &val);
- if (val == 0x1021) // for both 6996LC and 6996I, only AB version need the patch
- ifx_sw_write(0x29, 0x9000);
- ifx_sw_write(0x30,0x0985);
-#endif
- }
-//joelin adm6996i support end
- return 0;
-}
-
-void __exit cleanup_adm6996_module(void)
-{
- printk("Free ADM device driver... \n");
-
- unregister_chrdev(69, "adm6996");
-
- /* remove proc entries */
- // remove_proc_entry("admide", NULL);
-}
-
-/* MarsLin, add start */
-#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
- #define SET_BIT(reg, mask) reg |= (mask)
- #define CLEAR_BIT(reg, mask) reg &= (~mask)
- static int ifx_hw_reset(void)
- {
- CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL0),0x2000);
- CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL1),0x2000);
- SET_BIT((*AMAZON_GPIO_P0_OD),0x2000);
- SET_BIT((*AMAZON_GPIO_P0_DIR), 0x2000);
- CLEAR_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
- mdelay(500);
- SET_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
- cleanup_adm6996_module();
- return init_adm6996_module();
- }
- int (*adm6996_hw_reset)(void) = ifx_hw_reset;
- EXPORT_SYMBOL(adm6996_hw_reset);
- EXPORT_SYMBOL(adm6996_mode);
- int (*adm6996_sw_read)(unsigned int addr, unsigned int *data) = ifx_sw_read;
- EXPORT_SYMBOL(adm6996_sw_read);
- int (*adm6996_sw_write)(unsigned int addr, unsigned int data) = ifx_sw_write;
- EXPORT_SYMBOL(adm6996_sw_write);
-#endif
-/* MarsLin, add end */
-
-/* Santosh: for IGMP proxy/snooping, Begin */
-EXPORT_SYMBOL (adm_process_mac_table_request);
-EXPORT_SYMBOL (adm_process_protocol_filter_request);
-/* Santosh: for IGMP proxy/snooping, End */
-
-MODULE_DESCRIPTION("ADMtek 6996 Driver");
-MODULE_AUTHOR("Joe Lin <joe.lin@infineon.com>");
-MODULE_LICENSE("GPL");
-
-module_init(init_adm6996_module);
-module_exit(cleanup_adm6996_module);
-
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- */
-//-----------------------------------------------------------------------
-/*
- * Description:
- * Driver for Infineon Amazon 3 port switch
- */
-//-----------------------------------------------------------------------
-/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com]
- * Created: 7-April-2004
- */
-//-----------------------------------------------------------------------
-/* History
- * Changed on: Jun 28, 2004
- * Changed by: peng.liu@infineon.com
- * Reason: add hardware flow control (HFC) (CONFIG_NET_HW_FLOWCONTROL)
- *
- * Changed on: Apr 6, 2005
- * Changed by: mars.lin@infineon.com
- * Reason : supoort port identification
- */
-
-
-// copyright 2004-2005 infineon.com
-
-// copyright 2007 john crispin <blogic@openwrt.org>
-// copyright 2007 felix fietkau <nbd@openwrt.org>
-// copyright 2009 hauke mehrtens <hauke@hauke-m.de>
-
-
-// TODO
-// port vlan code from bcrm target... the tawainese code was scrapped due to crappyness
-// check all the mmi reg settings and possibly document them better
-// verify the ethtool code
-// remove the while(1) stuff
-// further clean up and rework ... but it works for now
-// check the mode[]=bridge stuff
-// verify that the ethaddr can be set from u-boot
-
-
-#ifndef __KERNEL__
-#define __KERNEL__
-#endif
-
-
-#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-#define MODVERSIONS
-#endif
-
-#if defined(MODVERSIONS) && !defined(__GENKSYMS__)
-#include <linux/modversions.h>
-#endif
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/mii.h>
-#include <asm/uaccess.h>
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <linux/in6.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/ethtool.h>
-#include <asm/checksum.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/amazon_dma.h>
-#include <asm/amazon/amazon_sw.h>
-
-// how many mii ports are there ?
-#define AMAZON_SW_INT_NO 2
-
-#define ETHERNET_PACKET_DMA_BUFFER_SIZE 1536
-
-/***************************************** Module Parameters *************************************/
-char mode[] = "bridge";
-module_param_array(mode, charp, NULL, 0);
-
-static int timeout = 1 * HZ;
-module_param(timeout, int, 0);
-
-int switch_init(struct net_device *dev);
-void switch_tx_timeout(struct net_device *dev);
-
-static struct net_device *switch_devs[2];
-
-int add_mac_table_entry(u64 entry_value)
-{
- int i;
- u32 data1, data2;
-
- AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = ~7;
-
- for (i = 0; i < 32; i++) {
- AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | i;
- while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
- data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1);
- data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
- if ((data1 & (0x00700000)) != 0x00700000)
- continue;
- AMAZON_SW_REG32(AMAZON_SW_DATA1) = (u32) (entry_value >> 32);
- AMAZON_SW_REG32(AMAZON_SW_DATA2) = (u32) entry_value & 0xffffffff;
- AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | i;
- while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
- break;
- }
- AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) |= 7;
- if (i >= 32)
- return -1;
- return OK;
-}
-
-u64 read_mac_table_entry(int index)
-{
- u32 data1, data2;
- u64 value;
- AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | index;
- while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
- data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1) & 0xffffff;
- data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
- value = (u64) data1 << 32 | (u64) data2;
- return value;
-}
-
-int write_mac_table_entry(int index, u64 value)
-{
- u32 data1, data2;
- data1 = (u32) (value >> 32);
- data2 = (u32) value & 0xffffffff;
- AMAZON_SW_REG32(AMAZON_SW_DATA1) = data1;
- AMAZON_SW_REG32(AMAZON_SW_DATA2) = data2;
- AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | index;
- while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
- return OK;
-}
-
-u32 get_mdio_reg(int phy_addr, int reg_num)
-{
- u32 value;
- AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (3 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16);
- while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
- value = AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & 0xffff;
- return value;
-}
-
-int set_mdio_reg(int phy_addr, int reg_num, u32 value)
-{
- AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (2 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16) | (value & 0xffff);
- while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
- return OK;
-}
-
-int auto_negotiate(int phy_addr)
-{
- u32 value = 0;
- value = get_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG);
- set_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG, (value | RESTART_AUTO_NEGOTIATION | AUTO_NEGOTIATION_ENABLE | PHY_RESET));
- return OK;
-}
-
-/*
- In this version of switch driver, we split the dma channels for the switch.
- 2 for port0 and 2 for port1. So that we can do internal bridging if necessary.
- In switch mode, packets coming in from port0 or port1 is able to do Destination
- address lookup. Packets coming from port0 with destination address of port1 should
- not go to pmac again. The switch hardware should be able to do the switch in the hard
- ware level. Packets coming from the pmac should not do the DA look up in that the
- desination is already known for the kernel. It only needs to go to the correct NIC to
- find its way out.
- */
-int amazon_sw_chip_init(void)
-{
- u32 tmp1;
- int i = 0;
-
- /* Aging tick select: 5mins */
- tmp1 = 0xa0;
- if (strcmp(mode, "bridge") == 0) {
- // bridge mode, set militarised mode to 1, no learning!
- tmp1 |= 0xC00;
- } else {
- // enable learning for P0 and P1,
- tmp1 |= 3;
- }
-
- /* unknown broadcast/multicast/unicast to all ports */
- AMAZON_SW_REG32(AMAZON_SW_UN_DEST) = 0x1ff;
-
- AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = tmp1;
-
- /* OCS:1 set OCS bit, split the two NIC in rx direction EDL:1 (enable DA lookup) */
-#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
- AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x700;
-#else
- AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x401;
-#endif
-
- /* EPC: 1 split the two NIC in tx direction CRC is generated */
- AMAZON_SW_REG32(AMAZON_SW_P2_CTL) = 0x6;
-
- // for bi-directional
- AMAZON_SW_REG32(AMAZON_SW_P0_WM) = 0x14141412;
- AMAZON_SW_REG32(AMAZON_SW_P1_WM) = 0x14141412;
- AMAZON_SW_REG32(AMAZON_SW_P2_WM) = 0x28282826;
- AMAZON_SW_REG32(AMAZON_SW_GBL_WM) = 0x0;
-
- AMAZON_SW_REG32(AMAZON_CGU_PLL0SR) = (AMAZON_SW_REG32(AMAZON_CGU_PLL0SR)) | 0x58000000;
- // clock for PHY
- AMAZON_SW_REG32(AMAZON_CGU_IFCCR) = (AMAZON_SW_REG32(AMAZON_CGU_IFCCR)) | 0x80000004;
- // enable power for PHY
- AMAZON_SW_REG32(AMAZON_PMU_PWDCR) = (AMAZON_SW_REG32(AMAZON_PMU_PWDCR)) | AMAZON_PMU_PWDCR_EPHY;
- // set reverse MII, enable MDIO statemachine
- AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG) = 0x800027bf;
- while (1)
- if (((AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG)) & 0x80000000) == 0)
- break;
- AMAZON_SW_REG32(AMAZON_SW_EPHY) = 0xff;
-
- // auto negotiation
- AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = 0x83e08000;
- auto_negotiate(0x1f);
-
- /* enable all ports */
- AMAZON_SW_REG32(AMAZON_SW_PS_CTL) = 0x7;
- for (i = 0; i < 32; i++)
- write_mac_table_entry(i, 1 << 50);
- return 0;
-}
-
-static unsigned char my_ethaddr[MAX_ADDR_LEN];
-/* need to get the ether addr from u-boot */
-static int __init ethaddr_setup(char *line)
-{
- char *ep;
- int i;
-
- memset(my_ethaddr, 0, MAX_ADDR_LEN);
- for (i = 0; i < 6; i++) {
- my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0;
- if (line)
- line = (*ep) ? ep + 1 : ep;
- }
- printk(KERN_INFO "amazon_mii0: mac address %2x-%2x-%2x-%2x-%2x-%2x \n", my_ethaddr[0], my_ethaddr[1], my_ethaddr[2], my_ethaddr[3], my_ethaddr[4], my_ethaddr[5]);
- return 0;
-}
-
-__setup("ethaddr=", ethaddr_setup);
-
-static void open_rx_dma(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
- int i;
-
- for (i = 0; i < dma_dev->num_rx_chan; i++)
- dma_dev->rx_chan[i].control = 1;
- dma_device_update_rx(dma_dev);
-}
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-static void close_rx_dma(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
- int i;
-
- for (i = 0; i < dma_dev->num_rx_chan; i++)
- dma_dev->rx_chan[i].control = 0;
- dma_device_update_rx(dma_dev);
-}
-
-void amazon_xon(struct net_device *dev)
-{
- unsigned long flag;
- local_irq_save(flag);
- open_rx_dma(dev);
- local_irq_restore(flag);
-}
-#endif
-
-int switch_open(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- if (!strcmp(dev->name, "eth1")) {
- priv->mdio_phy_addr = PHY0_ADDR;
- }
- open_rx_dma(dev);
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- if ((priv->fc_bit = netdev_register_fc(dev, amazon_xon)) == 0) {
- printk(KERN_WARNING "amazon_mii0: Hardware Flow Control register fails\n");
- }
-#endif
-
- netif_start_queue(dev);
- return OK;
-}
-
-int switch_release(struct net_device *dev)
-{
- int i;
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
-
- for (i = 0; i < dma_dev->num_tx_chan; i++)
- dma_dev->tx_chan[i].control = 0;
- for (i = 0; i < dma_dev->num_rx_chan; i++)
- dma_dev->rx_chan[i].control = 0;
-
- dma_device_update(dma_dev);
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- if (priv->fc_bit) {
- netdev_unregister_fc(priv->fc_bit);
- }
-#endif
- netif_stop_queue(dev);
-
- return OK;
-}
-
-
-void switch_rx(struct net_device *dev, int len, struct sk_buff *skb)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- int mit_sel = 0;
-#endif
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- mit_sel = netif_rx(skb);
- switch (mit_sel) {
- case NET_RX_SUCCESS:
- case NET_RX_CN_LOW:
- case NET_RX_CN_MOD:
- break;
- case NET_RX_CN_HIGH:
- break;
- case NET_RX_DROP:
- if ((priv->fc_bit)
- && (!test_and_set_bit(priv->fc_bit, &netdev_fc_xoff))) {
- close_rx_dma(dev);
- }
- break;
- }
-#else
- netif_rx(skb);
-#endif
- priv->stats.rx_packets++;
- priv->stats.rx_bytes += len;
- return;
-}
-
-int asmlinkage switch_hw_tx(char *buf, int len, struct net_device *dev)
-{
- struct switch_priv *priv = netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
-
- dma_dev->current_tx_chan = 0;
- return dma_device_write(dma_dev, buf, len, priv->skb);
-}
-
-int asmlinkage switch_tx(struct sk_buff *skb, struct net_device *dev)
-{
- int len;
- char *data;
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-
- len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- data = skb->data;
- priv->skb = skb;
- dev->trans_start = jiffies;
-
- if (switch_hw_tx(data, len, dev) != len) {
- dev_kfree_skb_any(skb);
- return OK;
- }
-
- priv->stats.tx_packets++;
- priv->stats.tx_bytes += len;
- return OK;
-}
-
-void switch_tx_timeout(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- priv->stats.tx_errors++;
- netif_wake_queue(dev);
- return;
-}
-
-void negotiate(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- unsigned short data = get_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG);
-
- data &= ~(MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD);
-
- switch (priv->current_speed_selection) {
- case 10:
- if (priv->current_duplex == full)
- data |= MDIO_ADVERT_10_FD;
- else if (priv->current_duplex == half)
- data |= MDIO_ADVERT_10_HD;
- else
- data |= MDIO_ADVERT_10_HD | MDIO_ADVERT_10_FD;
- break;
-
- case 100:
- if (priv->current_duplex == full)
- data |= MDIO_ADVERT_100_FD;
- else if (priv->current_duplex == half)
- data |= MDIO_ADVERT_100_HD;
- else
- data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD;
- break;
-
- case 0: /* Auto */
- if (priv->current_duplex == full)
- data |= MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD;
- else if (priv->current_duplex == half)
- data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_10_HD;
- else
- data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
- break;
-
- default: /* assume autoneg speed and duplex */
- data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
- }
-
- set_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG, data);
-
- /* Renegotiate with link partner */
-
- data = get_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG);
- data |= MDIO_BC_NEGOTIATE;
-
- set_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG, data);
-
-}
-
-
-void set_duplex(struct net_device *dev, enum duplex new_duplex)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- if (new_duplex != priv->current_duplex) {
- priv->current_duplex = new_duplex;
- negotiate(dev);
- }
-}
-
-void set_speed(struct net_device *dev, unsigned long speed)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- priv->current_speed_selection = speed;
- negotiate(dev);
-}
-
-static int switch_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- struct ethtool_cmd ecmd;
-
- if (copy_from_user(&ecmd, ifr->ifr_data, sizeof(ecmd)))
- return -EFAULT;
-
- switch (ecmd.cmd) {
- case ETHTOOL_GSET:
- memset((void *) &ecmd, 0, sizeof(ecmd));
- ecmd.supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
- ecmd.port = PORT_TP;
- ecmd.transceiver = XCVR_EXTERNAL;
- ecmd.phy_address = priv->mdio_phy_addr;
-
- ecmd.speed = priv->current_speed;
-
- ecmd.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-
- ecmd.advertising = ADVERTISED_TP;
- if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
- ecmd.advertising |= ADVERTISED_Autoneg;
- else {
- ecmd.advertising |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
- if (priv->current_speed_selection == 10)
- ecmd.advertising &= ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full);
- else if (priv->current_speed_selection == 100)
- ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full);
- if (priv->current_duplex == half)
- ecmd.advertising &= ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full);
- else if (priv->current_duplex == full)
- ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half);
- }
- ecmd.autoneg = AUTONEG_ENABLE;
- if (copy_to_user(ifr->ifr_data, &ecmd, sizeof(ecmd)))
- return -EFAULT;
- break;
-
- case ETHTOOL_SSET:
- if (!capable(CAP_NET_ADMIN)) {
- return -EPERM;
- }
- if (ecmd.autoneg == AUTONEG_ENABLE) {
- set_duplex(dev, autoneg);
- set_speed(dev, 0);
- } else {
- set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full);
- set_speed(dev, ecmd.speed == SPEED_10 ? 10 : 100);
- }
- break;
-
- case ETHTOOL_GDRVINFO:
- {
- struct ethtool_drvinfo info;
- memset((void *) &info, 0, sizeof(info));
- strncpy(info.driver, "AMAZONE", sizeof(info.driver) - 1);
- strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1);
- strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1);
- info.regdump_len = 0;
- info.eedump_len = 0;
- info.testinfo_len = 0;
- if (copy_to_user(ifr->ifr_data, &info, sizeof(info)))
- return -EFAULT;
- }
- break;
- case ETHTOOL_NWAY_RST:
- if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
- negotiate(dev);
- break;
- default:
- return -EOPNOTSUPP;
- break;
- }
- return 0;
-}
-
-
-
-int mac_table_tools_ioctl(struct net_device *dev, struct mac_table_req *req)
-{
- int cmd;
- int i;
- cmd = req->cmd;
- switch (cmd) {
- case RESET_MAC_TABLE:
- for (i = 0; i < 32; i++) {
- write_mac_table_entry(i, 0);
- }
- break;
- case READ_MAC_ENTRY:
- req->entry_value = read_mac_table_entry(req->index);
- break;
- case WRITE_MAC_ENTRY:
- write_mac_table_entry(req->index, req->entry_value);
- break;
- case ADD_MAC_ENTRY:
- add_mac_table_entry(req->entry_value);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-
-/*
- the ioctl for the switch driver is developed in the conventional way
- the control type falls into some basic categories, among them, the
- SIOCETHTOOL is the traditional eth interface. VLAN_TOOLS and
- MAC_TABLE_TOOLS are designed specifically for amazon chip. User
- should be aware of the data structures used in these interfaces.
-*/
-int switch_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct data_req *switch_data_req = (struct data_req *) ifr->ifr_data;
- struct mac_table_req *switch_mac_table_req;
- switch (cmd) {
- case SIOCETHTOOL:
- switch_ethtool_ioctl(dev, ifr);
- break;
- case SIOCGMIIPHY: /* Get PHY address */
- break;
- case SIOCGMIIREG: /* Read MII register */
- break;
- case SIOCSMIIREG: /* Write MII register */
- break;
- case SET_ETH_SPEED_10: /* 10 Mbps */
- break;
- case SET_ETH_SPEED_100: /* 100 Mbps */
- break;
- case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */
- break;
- case SET_ETH_DUPLEX_HALF: /* Half duplex. */
- break;
- case SET_ETH_DUPLEX_FULL: /* Full duplex. */
- break;
- case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex */
- break;
- case SET_ETH_REG:
- AMAZON_SW_REG32(switch_data_req->index) = switch_data_req->value;
- break;
- case MAC_TABLE_TOOLS:
- switch_mac_table_req = (struct mac_table_req *) ifr->ifr_data;
- mac_table_tools_ioctl(dev, switch_mac_table_req);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-struct net_device_stats *switch_stats(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- return &priv->stats;
-}
-
-int switch_change_mtu(struct net_device *dev, int new_mtu)
-{
- if (new_mtu >= 1516)
- new_mtu = 1516;
- dev->mtu = new_mtu;
- return 0;
-}
-
-int switch_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
-{
- u8 *buf = NULL;
- int len = 0;
- struct sk_buff *skb = NULL;
-
- len = dma_device_read(dma_dev, &buf, (void **) &skb);
-
- if (len >= 0x600) {
- printk(KERN_WARNING "amazon_mii0: packet too large %d\n", len);
- goto switch_hw_receive_err_exit;
- }
-
- /* remove CRC */
- len -= 4;
- if (skb == NULL) {
- printk(KERN_WARNING "amazon_mii0: cannot restore pointer\n");
- goto switch_hw_receive_err_exit;
- }
- if (len > (skb->end - skb->tail)) {
- printk(KERN_WARNING "amazon_mii0: BUG, len:%d end:%p tail:%p\n", (len + 4), skb->end, skb->tail);
- goto switch_hw_receive_err_exit;
- }
- skb_put(skb, len);
- skb->dev = dev;
- switch_rx(dev, len, skb);
- return OK;
-
- switch_hw_receive_err_exit:
- if (skb)
- dev_kfree_skb_any(skb);
- return -EIO;
-}
-
-int dma_intr_handler(struct dma_device_info *dma_dev, int status)
-{
- struct net_device *dev;
-
- dev = dma_dev->priv;
- switch (status) {
- case RCV_INT:
- switch_hw_receive(dev, dma_dev);
- break;
- case TX_BUF_FULL_INT:
- netif_stop_queue(dev);
- break;
- case TRANSMIT_CPT_INT:
- netif_wake_queue(dev);
- break;
- }
- return OK;
-}
-
-/* reserve 2 bytes in front of data pointer*/
-u8 *dma_buffer_alloc(int len, int *byte_offset, void **opt)
-{
- u8 *buffer = NULL;
- struct sk_buff *skb = NULL;
- skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
- if (skb == NULL) {
- return NULL;
- }
- buffer = (u8 *) (skb->data);
- skb_reserve(skb, 2);
- *(int *) opt = (int) skb;
- *byte_offset = 2;
- return buffer;
-}
-
-int dma_buffer_free(u8 * dataptr, void *opt)
-{
- struct sk_buff *skb = NULL;
- if (opt == NULL) {
- kfree(dataptr);
- } else {
- skb = (struct sk_buff *) opt;
- dev_kfree_skb_any(skb);
- }
- return OK;
-}
-
-int init_dma_device(_dma_device_info * dma_dev, struct net_device *dev)
-{
- int i;
- int num_tx_chan, num_rx_chan;
- if (strcmp(dma_dev->device_name, "switch1") == 0) {
- num_tx_chan = 1;
- num_rx_chan = 2;
- } else {
- num_tx_chan = 1;
- num_rx_chan = 2;
- }
- dma_dev->priv = dev;
-
- dma_dev->weight = 1;
- dma_dev->num_tx_chan = num_tx_chan;
- dma_dev->num_rx_chan = num_rx_chan;
- dma_dev->ack = 1;
- dma_dev->tx_burst_len = 4;
- dma_dev->rx_burst_len = 4;
- for (i = 0; i < dma_dev->num_tx_chan; i++) {
- dma_dev->tx_chan[i].weight = QOS_DEFAULT_WGT;
- dma_dev->tx_chan[i].desc_num = 10;
- dma_dev->tx_chan[i].packet_size = 0;
- dma_dev->tx_chan[i].control = 0;
- }
- for (i = 0; i < num_rx_chan; i++) {
- dma_dev->rx_chan[i].weight = QOS_DEFAULT_WGT;
- dma_dev->rx_chan[i].desc_num = 10;
- dma_dev->rx_chan[i].packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
- dma_dev->rx_chan[i].control = 0;
- }
- dma_dev->intr_handler = dma_intr_handler;
- dma_dev->buffer_alloc = dma_buffer_alloc;
- dma_dev->buffer_free = dma_buffer_free;
- return 0;
-}
-
-int switch_set_mac_address(struct net_device *dev, void *p)
-{
- struct sockaddr *addr = p;
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- return OK;
-}
-
-static const struct net_device_ops amazon_mii_ops = {
- .ndo_init = switch_init,
- .ndo_open = switch_open,
- .ndo_stop = switch_release,
- .ndo_start_xmit = switch_tx,
- .ndo_do_ioctl = switch_ioctl,
- .ndo_get_stats = switch_stats,
- .ndo_change_mtu = switch_change_mtu,
- .ndo_set_mac_address = switch_set_mac_address,
- .ndo_tx_timeout = switch_tx_timeout,
-};
-
-int switch_init(struct net_device *dev)
-{
- u64 retval = 0;
- int i;
- int result;
- struct switch_priv *priv;
- ether_setup(dev); /* assign some of the fields */
- printk(KERN_INFO "amazon_mii0: %s up using ", dev->name);
- dev->watchdog_timeo = timeout;
-
- priv = netdev_priv(dev);
- priv->dma_device = (struct dma_device_info *) kmalloc(sizeof(struct dma_device_info), GFP_KERNEL);
- if (priv->num == 0) {
- sprintf(priv->dma_device->device_name, "switch1");
- } else if (priv->num == 1) {
- sprintf(priv->dma_device->device_name, "switch2");
- }
- printk("\"%s\"\n", priv->dma_device->device_name);
- init_dma_device(priv->dma_device, dev);
- result = dma_device_register(priv->dma_device);
-
- /* read the mac address from the mac table and put them into the mac table. */
- for (i = 0; i < 6; i++) {
- retval += my_ethaddr[i];
- }
- /* ethaddr not set in u-boot ? */
- if (retval == 0) {
- dev->dev_addr[0] = 0x00;
- dev->dev_addr[1] = 0x20;
- dev->dev_addr[2] = 0xda;
- dev->dev_addr[3] = 0x86;
- dev->dev_addr[4] = 0x23;
- dev->dev_addr[5] = 0x74 + (unsigned char) priv->num;
- } else {
- for (i = 0; i < 6; i++) {
- dev->dev_addr[i] = my_ethaddr[i];
- }
- dev->dev_addr[5] += +(unsigned char) priv->num;
- }
- return OK;
-}
-
-static int amazon_mii_probe(struct platform_device *dev)
-{
- int i = 0, result, device_present = 0;
- struct switch_priv *priv;
-
- for (i = 0; i < AMAZON_SW_INT_NO; i++) {
- switch_devs[i] = alloc_etherdev(sizeof(struct switch_priv));
- switch_devs[i]->netdev_ops = &amazon_mii_ops;
- strcpy(switch_devs[i]->name, "eth%d");
- priv = (struct switch_priv *) netdev_priv(switch_devs[i]);
- priv->num = i;
- if ((result = register_netdev(switch_devs[i])))
- printk(KERN_WARNING "amazon_mii0: error %i registering device \"%s\"\n", result, switch_devs[i]->name);
- else
- device_present++;
- }
- amazon_sw_chip_init();
- return device_present ? 0 : -ENODEV;
-}
-
-static int amazon_mii_remove(struct platform_device *dev)
-{
- int i;
- struct switch_priv *priv;
- for (i = 0; i < AMAZON_SW_INT_NO; i++) {
- priv = netdev_priv(switch_devs[i]);
- if (priv->dma_device) {
- dma_device_unregister(priv->dma_device);
- kfree(priv->dma_device);
- }
- kfree(netdev_priv(switch_devs[i]));
- unregister_netdev(switch_devs[i]);
- }
- return 0;
-}
-
-static struct platform_driver amazon_mii_driver = {
- .probe = amazon_mii_probe,
- .remove = amazon_mii_remove,
- .driver = {
- .name = "amazon_mii0",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init amazon_mii_init(void)
-{
- int ret = platform_driver_register(&amazon_mii_driver);
- if (ret)
- printk(KERN_WARNING "amazon_mii0: Error registering platfom driver!\n");
- return ret;
-}
-
-static void __exit amazon_mii_cleanup(void)
-{
- platform_driver_unregister(&amazon_mii_driver);
-}
-
-module_init(amazon_mii_init);
-module_exit(amazon_mii_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Wu Qi Ming");
-MODULE_DESCRIPTION("ethernet driver for AMAZON boards");
-
--- /dev/null
+/******************************************************************************
+ Copyright (c) 2004, Infineon Technologies. All rights reserved.
+
+ No Warranty
+ Because the program is licensed free of charge, there is no warranty for
+ the program, to the extent permitted by applicable law. Except when
+ otherwise stated in writing the copyright holders and/or other parties
+ provide the program "as is" without warranty of any kind, either
+ expressed or implied, including, but not limited to, the implied
+ warranties of merchantability and fitness for a particular purpose. The
+ entire risk as to the quality and performance of the program is with
+ you. should the program prove defective, you assume the cost of all
+ necessary servicing, repair or correction.
+
+ In no event unless required by applicable law or agreed to in writing
+ will any copyright holder, or any other party who may modify and/or
+ redistribute the program as permitted above, be liable to you for
+ damages, including any general, special, incidental or consequential
+ damages arising out of the use or inability to use the program
+ (including but not limited to loss of data or data being rendered
+ inaccurate or losses sustained by you or third parties or a failure of
+ the program to operate with any other programs), even if such holder or
+ other party has been advised of the possibility of such damages.
+ ******************************************************************************
+ Module : admmod.c
+ Date : 2004-09-01
+ Description : JoeLin
+ Remarks:
+
+ Revision:
+ MarsLin, add to support VLAN
+
+ *****************************************************************************/
+//000001.joelin 2005/06/02 add"ADM6996_MDC_MDIO_MODE" define,
+// if define ADM6996_MDC_MDIO_MODE==> ADM6996LC and ADM6996I will be in MDIO/MDC(SMI)(16 bit) mode,
+// amazon should contrl ADM6996 by MDC/MDIO pin
+// if undef ADM6996_MDC_MDIO_MODE==> ADM6996 will be in EEProm(32 bit) mode,
+// amazon should contrl ADM6996 by GPIO15,16,17,18 pin
+/* 507281:linmars 2005/07/28 support MDIO/EEPROM config mode */
+/* 509201:linmars remove driver testing codes */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <asm/atomic.h>
+#include <asm-mips/amazon/amazon.h>
+#include <asm-mips/amazon/adm6996.h>
+//#include <linux/amazon/adm6996.h>
+
+
+unsigned int ifx_sw_conf[ADM_SW_MAX_PORT_NUM+1] = \
+ {ADM_SW_PORT0_CONF, ADM_SW_PORT1_CONF, ADM_SW_PORT2_CONF, \
+ ADM_SW_PORT3_CONF, ADM_SW_PORT4_CONF, ADM_SW_PORT5_CONF};
+unsigned int ifx_sw_bits[8] = \
+ {0x1, 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff};
+unsigned int ifx_sw_vlan_port[6] = {0, 2, 4, 6, 7, 8};
+//050613:fchang
+/* 507281:linmars start */
+#ifdef CONFIG_SWITCH_ADM6996_MDIO
+#define ADM6996_MDC_MDIO_MODE 1 //000001.joelin
+#else
+#undef ADM6996_MDC_MDIO_MODE
+#endif
+/* 507281:linmars end */
+#define adm6996i 0
+#define adm6996lc 1
+#define adm6996l 2
+unsigned int adm6996_mode=adm6996i;
+/*
+ initialize GPIO pins.
+ output mode, low
+*/
+void ifx_gpio_init(void)
+{
+ //GPIO16,17,18 direction:output
+ //GPIO16,17,18 output 0
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_DIR) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT) =AMAZON_SW_REG(AMAZON_GPIO_P1_IN)& ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+
+}
+
+/* read one bit from mdio port */
+int ifx_sw_mdio_readbit(void)
+{
+ //int val;
+
+ //val = (AMAZON_SW_REG(GPIO_conf0_REG) & GPIO0_INPUT_MASK) >> 8;
+ //return val;
+ //GPIO16
+ return AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&1;
+}
+
+/*
+ MDIO mode selection
+ 1 -> output
+ 0 -> input
+
+ switch input/output mode of GPIO 0
+*/
+void ifx_mdio_mode(int mode)
+{
+// AMAZON_SW_REG(GPIO_conf0_REG) = mode ? GPIO_ENABLEBITS :
+// ((GPIO_ENABLEBITS | MDIO_INPUT) & ~MDIO_OUTPUT_EN);
+ mode?(AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)|=GPIO_MDIO):
+ (AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)&=~GPIO_MDIO);
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_DIR);
+ mode?(r|=GPIO_MDIO):(r&=~GPIO_MDIO);
+ AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)=r;*/
+}
+
+void ifx_mdc_hi(void)
+{
+ //GPIO_SET_HI(GPIO_MDC);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDC;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r|=GPIO_MDC;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDC;
+}
+
+void ifx_mdio_hi(void)
+{
+ //GPIO_SET_HI(GPIO_MDIO);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDIO;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r|=GPIO_MDIO;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDIO;
+}
+
+void ifx_mdcs_hi(void)
+{
+ //GPIO_SET_HI(GPIO_MDCS);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDCS;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r|=GPIO_MDCS;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDCS;
+}
+
+void ifx_mdc_lo(void)
+{
+ //GPIO_SET_LOW(GPIO_MDC);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDC;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r&=~GPIO_MDC;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDC);
+}
+
+void ifx_mdio_lo(void)
+{
+ //GPIO_SET_LOW(GPIO_MDIO);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDIO;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r&=~GPIO_MDIO;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDIO);
+}
+
+void ifx_mdcs_lo(void)
+{
+ //GPIO_SET_LOW(GPIO_MDCS);
+ //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDCS;
+ /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
+ r&=~GPIO_MDCS;
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDCS);
+}
+
+/*
+ mdc pulse
+ 0 -> 1 -> 0
+*/
+static void ifx_sw_mdc_pulse(void)
+{
+ ifx_mdc_lo();
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+ ifx_mdc_hi();
+ udelay(ADM_SW_MDC_UP_DELAY);
+ ifx_mdc_lo();
+}
+
+/*
+ mdc toggle
+ 1 -> 0
+*/
+static void ifx_sw_mdc_toggle(void)
+{
+ ifx_mdc_hi();
+ udelay(ADM_SW_MDC_UP_DELAY);
+ ifx_mdc_lo();
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+}
+
+/*
+ enable eeprom write
+ For ATC 93C66 type EEPROM; accessing ADM6996 internal EEPROM type registers
+*/
+static void ifx_sw_eeprom_write_enable(void)
+{
+ unsigned int op;
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_hi();
+ udelay(ADM_SW_CS_DELAY);
+ /* enable chip select */
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+ /* start bit */
+ ifx_mdio_hi();
+ ifx_sw_mdc_pulse();
+
+ /* eeprom write enable */
+ op = ADM_SW_BIT_MASK_4;
+ while (op)
+ {
+ if (op & ADM_SW_EEPROM_WRITE_ENABLE)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
+ while (op)
+ {
+ ifx_mdio_lo();
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+ /* disable chip select */
+ ifx_mdcs_lo();
+ udelay(ADM_SW_CS_DELAY);
+ ifx_sw_mdc_pulse();
+}
+
+/*
+ disable eeprom write
+*/
+static void ifx_sw_eeprom_write_disable(void)
+{
+ unsigned int op;
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_hi();
+ udelay(ADM_SW_CS_DELAY);
+ /* enable chip select */
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ /* start bit */
+ ifx_mdio_hi();
+ ifx_sw_mdc_pulse();
+ /* eeprom write disable */
+ op = ADM_SW_BIT_MASK_4;
+ while (op)
+ {
+ if (op & ADM_SW_EEPROM_WRITE_DISABLE)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
+ while (op)
+ {
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+ /* disable chip select */
+ ifx_mdcs_lo();
+ udelay(ADM_SW_CS_DELAY);
+ ifx_sw_mdc_pulse();
+}
+
+/*
+ read registers from ADM6996
+ serial registers start at 0x200 (addr bit 9 = 1b)
+ EEPROM registers -> 16bits; Serial registers -> 32bits
+*/
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode//000001.joelin
+static int ifx_sw_read_adm6996i_smi(unsigned int addr, unsigned int *dat)
+{
+ addr=(addr<<16)&0x3ff0000;
+ AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) =(0xC0000000|addr);
+ while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
+ *dat=((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x0FFFF);
+ return 0;
+}
+#endif
+
+static int ifx_sw_read_adm6996i(unsigned int addr, unsigned int *dat)
+{
+ unsigned int op;
+
+ ifx_gpio_init();
+
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+
+ udelay(ADM_SW_CS_DELAY);
+
+ /* preamble, 32 bit 1 */
+ ifx_mdio_hi();
+ op = ADM_SW_BIT_MASK_32;
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* command start (01b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_START)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* read command (10b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_READ)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* send address A9 ~ A0 */
+ op = ADM_SW_BIT_MASK_10;
+ while (op)
+ {
+ if (op & addr)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* turnaround bits */
+ op = ADM_SW_BIT_MASK_2;
+ ifx_mdio_hi();
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+
+ /* set MDIO pin to input mode */
+ ifx_mdio_mode(ADM_SW_MDIO_INPUT);
+
+ /* start read data */
+ *dat = 0;
+//adm6996i op = ADM_SW_BIT_MASK_32;
+ op = ADM_SW_BIT_MASK_16;//adm6996i
+ while (op)
+ {
+ *dat <<= 1;
+ if (ifx_sw_mdio_readbit()) *dat |= 1;
+ ifx_sw_mdc_toggle();
+
+ op >>= 1;
+ }
+
+ /* set MDIO to output mode */
+ ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
+
+ /* dummy clock */
+ op = ADM_SW_BIT_MASK_4;
+ ifx_mdio_lo();
+ while(op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+ ifx_mdcs_hi();
+
+ /* EEPROM registers */
+//adm6996i if (!(addr & 0x200))
+//adm6996i {
+//adm6996i if (addr % 2)
+//adm6996i *dat >>= 16;
+//adm6996i else
+//adm6996i *dat &= 0xffff;
+//adm6996i }
+
+ return 0;
+}
+//adm6996
+static int ifx_sw_read_adm6996l(unsigned int addr, unsigned int *dat)
+{
+ unsigned int op;
+
+ ifx_gpio_init();
+
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+
+ udelay(ADM_SW_CS_DELAY);
+
+ /* preamble, 32 bit 1 */
+ ifx_mdio_hi();
+ op = ADM_SW_BIT_MASK_32;
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* command start (01b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_START)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* read command (10b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_READ)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* send address A9 ~ A0 */
+ op = ADM_SW_BIT_MASK_10;
+ while (op)
+ {
+ if (op & addr)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* turnaround bits */
+ op = ADM_SW_BIT_MASK_2;
+ ifx_mdio_hi();
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+
+ /* set MDIO pin to input mode */
+ ifx_mdio_mode(ADM_SW_MDIO_INPUT);
+
+ /* start read data */
+ *dat = 0;
+ op = ADM_SW_BIT_MASK_32;
+ while (op)
+ {
+ *dat <<= 1;
+ if (ifx_sw_mdio_readbit()) *dat |= 1;
+ ifx_sw_mdc_toggle();
+
+ op >>= 1;
+ }
+
+ /* set MDIO to output mode */
+ ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
+
+ /* dummy clock */
+ op = ADM_SW_BIT_MASK_4;
+ ifx_mdio_lo();
+ while(op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+ ifx_mdcs_hi();
+
+ /* EEPROM registers */
+ if (!(addr & 0x200))
+ {
+ if (addr % 2)
+ *dat >>= 16;
+ else
+ *dat &= 0xffff;
+ }
+
+ return 0;
+}
+
+static int ifx_sw_read(unsigned int addr, unsigned int *dat)
+{
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
+ ifx_sw_read_adm6996i_smi(addr,dat);
+#else
+ if (adm6996_mode==adm6996i) ifx_sw_read_adm6996i(addr,dat);
+ else ifx_sw_read_adm6996l(addr,dat);
+#endif
+ return 0;
+
+}
+
+/*
+ write register to ADM6996 eeprom registers
+*/
+//for adm6996i -start
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
+static int ifx_sw_write_adm6996i_smi(unsigned int addr, unsigned int dat)
+{
+
+ AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) = ((addr<<16)&0x3ff0000)|dat|0x80000000;
+ while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
+
+ return 0;
+
+}
+#endif //ADM6996_MDC_MDIO_MODE //000001.joelin
+
+static int ifx_sw_write_adm6996i(unsigned int addr, unsigned int dat)
+{
+ unsigned int op;
+
+ ifx_gpio_init();
+
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ ifx_mdcs_lo();
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+
+ udelay(ADM_SW_CS_DELAY);
+
+ /* preamble, 32 bit 1 */
+ ifx_mdio_hi();
+ op = ADM_SW_BIT_MASK_32;
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* command start (01b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_START)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* write command (01b) */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_SMI_WRITE)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* send address A9 ~ A0 */
+ op = ADM_SW_BIT_MASK_10;
+ while (op)
+ {
+ if (op & addr)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* turnaround bits */
+ op = ADM_SW_BIT_MASK_2;
+ ifx_mdio_hi();
+ while (op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ udelay(ADM_SW_MDC_DOWN_DELAY);
+
+ /* set MDIO pin to output mode */
+ ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
+
+
+ /* start write data */
+ op = ADM_SW_BIT_MASK_16;
+ while (op)
+ {
+ if (op & dat)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_toggle();
+ op >>= 1;
+ }
+
+ // /* set MDIO to output mode */
+ // ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
+
+ /* dummy clock */
+ op = ADM_SW_BIT_MASK_4;
+ ifx_mdio_lo();
+ while(op)
+ {
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ ifx_mdc_lo();
+ ifx_mdio_lo();
+ ifx_mdcs_hi();
+
+ /* EEPROM registers */
+//adm6996i if (!(addr & 0x200))
+//adm6996i {
+//adm6996i if (addr % 2)
+//adm6996i *dat >>= 16;
+//adm6996i else
+//adm6996i *dat &= 0xffff;
+//adm6996i }
+
+ return 0;
+}
+//for adm6996i-end
+static int ifx_sw_write_adm6996l(unsigned int addr, unsigned int dat)
+{
+ unsigned int op;
+
+ ifx_gpio_init();
+
+ /* enable write */
+ ifx_sw_eeprom_write_enable();
+
+ /* chip select */
+ ifx_mdcs_hi();
+ udelay(ADM_SW_CS_DELAY);
+
+ /* issue write command */
+ /* start bit */
+ ifx_mdio_hi();
+ ifx_sw_mdc_pulse();
+
+ /* EEPROM write command */
+ op = ADM_SW_BIT_MASK_2;
+ while (op)
+ {
+ if (op & ADM_SW_EEPROM_WRITE)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_pulse();
+ op >>= 1;
+ }
+
+ /* send address A7 ~ A0 */
+ op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 1);
+
+ while (op)
+ {
+ if (op & addr)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_toggle();
+ op >>= 1;
+ }
+
+ /* start write data */
+ op = ADM_SW_BIT_MASK_16;
+ while (op)
+ {
+ if (op & dat)
+ ifx_mdio_hi();
+ else
+ ifx_mdio_lo();
+
+ ifx_sw_mdc_toggle();
+ op >>= 1;
+ }
+
+ /* disable cs & wait 1 clock */
+ ifx_mdcs_lo();
+ udelay(ADM_SW_CS_DELAY);
+ ifx_sw_mdc_toggle();
+
+ ifx_sw_eeprom_write_disable();
+
+ return 0;
+}
+
+static int ifx_sw_write(unsigned int addr, unsigned int dat)
+{
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
+ ifx_sw_write_adm6996i_smi(addr,dat);
+#else //000001.joelin
+ if (adm6996_mode==adm6996i) ifx_sw_write_adm6996i(addr,dat);
+ else ifx_sw_write_adm6996l(addr,dat);
+#endif //000001.joelin
+ return 0;
+}
+
+/*
+ do switch PHY reset
+*/
+int ifx_sw_reset(void)
+{
+ /* reset PHY */
+ ifx_sw_write(ADM_SW_PHY_RESET, 0);
+
+ return 0;
+}
+
+/* 509201:linmars start */
+#if 0
+/*
+ check port status
+*/
+int ifx_check_port_status(int port)
+{
+ unsigned int val;
+
+ if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM))
+ {
+ ifx_printf(("error on port number (%d)!!\n", port));
+ return -1;
+ }
+
+ ifx_sw_read(ifx_sw_conf[port], &val);
+ if (ifx_sw_conf[port]%2) val >>= 16;
+ /* only 16bits are effective */
+ val &= 0xFFFF;
+
+ ifx_printf(("Port %d status (%.8x): \n", port, val));
+
+ if (val & ADM_SW_PORT_FLOWCTL)
+ ifx_printf(("\t802.3x flow control supported!\n"));
+ else
+ ifx_printf(("\t802.3x flow control not supported!\n"));
+
+ if (val & ADM_SW_PORT_AN)
+ ifx_printf(("\tAuto negotiation ON!\n"));
+ else
+ ifx_printf(("\tAuto negotiation OFF!\n"));
+
+ if (val & ADM_SW_PORT_100M)
+ ifx_printf(("\tLink at 100M!\n"));
+ else
+ ifx_printf(("\tLink at 10M!\n"));
+
+ if (val & ADM_SW_PORT_FULL)
+ ifx_printf(("\tFull duplex!\n"));
+ else
+ ifx_printf(("\tHalf duplex!\n"));
+
+ if (val & ADM_SW_PORT_DISABLE)
+ ifx_printf(("\tPort disabled!\n"));
+ else
+ ifx_printf(("\tPort enabled!\n"));
+
+ if (val & ADM_SW_PORT_TOS)
+ ifx_printf(("\tTOS enabled!\n"));
+ else
+ ifx_printf(("\tTOS disabled!\n"));
+
+ if (val & ADM_SW_PORT_PPRI)
+ ifx_printf(("\tPort priority first!\n"));
+ else
+ ifx_printf(("\tVLAN or TOS priority first!\n"));
+
+ if (val & ADM_SW_PORT_MDIX)
+ ifx_printf(("\tAuto MDIX!\n"));
+ else
+ ifx_printf(("\tNo auto MDIX\n"));
+
+ ifx_printf(("\tPVID: %d\n", \
+ ((val >> ADM_SW_PORT_PVID_SHIFT)&ifx_sw_bits[ADM_SW_PORT_PVID_BITS])));
+
+ return 0;
+}
+/*
+ initialize a VLAN
+ clear all VLAN bits
+*/
+int ifx_sw_vlan_init(int vlanid)
+{
+ ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, 0);
+
+ return 0;
+}
+
+/*
+ add a port to certain vlan
+*/
+int ifx_sw_vlan_add(int port, int vlanid)
+{
+ int reg = 0;
+
+ if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) ||
+ (vlanid > ADM_SW_MAX_VLAN_NUM))
+ {
+ ifx_printf(("Port number or VLAN number ERROR!!\n"));
+ return -1;
+ }
+ ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®);
+ reg |= (1 << ifx_sw_vlan_port[port]);
+ ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
+
+ return 0;
+}
+
+/*
+ delete a given port from certain vlan
+*/
+int ifx_sw_vlan_del(int port, int vlanid)
+{
+ unsigned int reg = 0;
+
+ if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || (vlanid > ADM_SW_MAX_VLAN_NUM))
+ {
+ ifx_printf(("Port number or VLAN number ERROR!!\n"));
+ return -1;
+ }
+ ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®);
+ reg &= ~(1 << ifx_sw_vlan_port[port]);
+ ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
+
+ return 0;
+}
+
+/*
+ default VLAN setting
+
+ port 0~3 as untag port and PVID = 1
+ VLAN1: port 0~3 and port 5 (MII)
+*/
+static int ifx_sw_init(void)
+{
+ ifx_printf(("Setting default ADM6996 registers... \n"));
+
+ /* MAC clone, 802.1q based VLAN */
+ ifx_sw_write(ADM_SW_VLAN_MODE, 0xff30);
+ /* auto MDIX, PVID=1, untag */
+ ifx_sw_write(ADM_SW_PORT0_CONF, 0x840f);
+ ifx_sw_write(ADM_SW_PORT1_CONF, 0x840f);
+ ifx_sw_write(ADM_SW_PORT2_CONF, 0x840f);
+ ifx_sw_write(ADM_SW_PORT3_CONF, 0x840f);
+ /* auto MDIX, PVID=2, untag */
+ ifx_sw_write(ADM_SW_PORT5_CONF, 0x880f);
+ /* port 0~3 & 5 as VLAN1 */
+ ifx_sw_write(ADM_SW_VLAN0_CONF+1, 0x0155);
+
+ return 0;
+}
+#endif
+/* 509201:linmars end */
+
+int adm_open(struct inode *node, struct file *filp)
+{
+ return 0;
+}
+
+ssize_t adm_read(struct file *filep, char *buf, size_t count, loff_t *ppos)
+{
+ return count;
+}
+
+ssize_t adm_write(struct file *filep, const char *buf, size_t count, loff_t *ppos)
+{
+ return count;
+}
+
+/* close */
+int adm_release(struct inode *inode, struct file *filp)
+{
+ return 0;
+}
+
+/* IOCTL function */
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
+static long adm_ioctl(struct file *filp, unsigned int cmd, unsigned long args)
+#else
+static int adm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long args)
+#endif
+{
+ PREGRW uREGRW;
+ unsigned int rtval;
+ unsigned int val; //6996i
+ unsigned int control[6] ; //6996i
+ unsigned int status[6] ; //6996i
+
+ PMACENTRY mMACENTRY;//adm6996i
+ PPROTOCOLFILTER uPROTOCOLFILTER ;///adm6996i
+
+ if (_IOC_TYPE(cmd) != ADM_MAGIC)
+ {
+ printk("adm_ioctl: IOC_TYPE(%x) != ADM_MAGIC(%x)! \n", _IOC_TYPE(cmd), ADM_MAGIC);
+ return (-EINVAL);
+ }
+
+ if(_IOC_NR(cmd) >= KEY_IOCTL_MAX_KEY)
+ {
+ printk(KERN_WARNING "adm_ioctl: IOC_NR(%x) invalid! \n", _IOC_NR(cmd));
+ return (-EINVAL);
+ }
+
+ switch (cmd)
+ {
+ case ADM_IOCTL_REGRW:
+ {
+ uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
+ rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
+ if (rtval != 0)
+ {
+ printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
+ return (-EFAULT);
+ }
+
+ switch(uREGRW->mode)
+ {
+ case REG_READ:
+ uREGRW->value = 0x12345678;//inl(uREGRW->addr);
+ copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
+ break;
+ case REG_WRITE:
+ //outl(uREGRW->value, uREGRW->addr);
+ break;
+
+ default:
+ printk("No such Register Read/Write function!! \n");
+ return (-EFAULT);
+ }
+ kfree(uREGRW);
+ break;
+ }
+
+ case ADM_SW_IOCTL_REGRW:
+ {
+ unsigned int val = 0xff;
+
+ uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
+ rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
+ if (rtval != 0)
+ {
+ printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
+ return (-EFAULT);
+ }
+
+ switch(uREGRW->mode)
+ {
+ case REG_READ:
+ ifx_sw_read(uREGRW->addr, &val);
+ uREGRW->value = val;
+ copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
+ break;
+
+ case REG_WRITE:
+ ifx_sw_write(uREGRW->addr, uREGRW->value);
+ break;
+ default:
+ printk("No such Register Read/Write function!! \n");
+ return (-EFAULT);
+ }
+ kfree(uREGRW);
+ break;
+ }
+/* 509201:linmars start */
+#if 0
+ case ADM_SW_IOCTL_PORTSTS:
+ for (rtval = 0; rtval < ADM_SW_MAX_PORT_NUM+1; rtval++)
+ ifx_check_port_status(rtval);
+ break;
+ case ADM_SW_IOCTL_INIT:
+ ifx_sw_init();
+ break;
+#endif
+/* 509201:linmars end */
+//adm6996i
+ case ADM_SW_IOCTL_MACENTRY_ADD:
+ case ADM_SW_IOCTL_MACENTRY_DEL:
+ case ADM_SW_IOCTL_MACENTRY_GET_INIT:
+ case ADM_SW_IOCTL_MACENTRY_GET_MORE:
+
+
+ mMACENTRY = (PMACENTRY)kmalloc(sizeof(MACENTRY), GFP_KERNEL);
+ rtval = copy_from_user(mMACENTRY, (PMACENTRY)args, sizeof(MACENTRY));
+ if (rtval != 0)
+ {
+ printk("ADM_SW_IOCTL_MACENTRY: copy from user FAILED!! \n");
+ return (-EFAULT);
+ }
+ control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ;
+ control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ;
+ control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ;
+ control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
+ if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
+ else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
+ if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {
+ //initial the pointer to the first address
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ control[5]=0x030;//initial the first address
+ ifx_sw_write(0x11f,control[5]);
+
+
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+
+ } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)
+ if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
+ else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
+ else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
+ control[5]=0x02c;//search by the mac address field
+
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ ifx_sw_write(0x11a,control[0]);
+ ifx_sw_write(0x11b,control[1]);
+ ifx_sw_write(0x11c,control[2]);
+ ifx_sw_write(0x11d,control[3]);
+ ifx_sw_write(0x11e,control[4]);
+ ifx_sw_write(0x11f,control[5]);
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ val=((val&0x7000)>>12);//result ,status5[14:12]
+ mMACENTRY->result=val;
+
+ if (!val) {
+ printk(" Command OK!! \n");
+ if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
+ ifx_sw_read(0x120,&(status[0]));
+ ifx_sw_read(0x121,&(status[1]));
+ ifx_sw_read(0x122,&(status[2]));
+ ifx_sw_read(0x123,&(status[3]));
+ ifx_sw_read(0x124,&(status[4]));
+ ifx_sw_read(0x125,&(status[5]));
+
+
+ mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ;
+ mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ;
+ mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ;
+ mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
+ mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ;
+ mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
+ mMACENTRY->fid=(status[3]&0xf);
+ mMACENTRY->portmap=((status[3]>>4)&0x3f);
+ if (status[5]&0x2) {//static info_ctrl //status5[1]????
+ mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
+ mMACENTRY->info_type=1;
+ }
+ else {//not static age_timer
+ mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
+ mMACENTRY->info_type=0;
+ }
+//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
+ mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
+ mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
+ }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
+
+ }
+ else if (val==0x001)
+ printk(" All Entry Used!! \n");
+ else if (val==0x002)
+ printk(" Entry Not Found!! \n");
+ else if (val==0x003)
+ printk(" Try Next Entry!! \n");
+ else if (val==0x005)
+ printk(" Command Error!! \n");
+ else
+ printk(" UnKnown Error!! \n");
+
+ copy_to_user((PMACENTRY)args, mMACENTRY,sizeof(MACENTRY));
+
+ break;
+
+ case ADM_SW_IOCTL_FILTER_ADD:
+ case ADM_SW_IOCTL_FILTER_DEL:
+ case ADM_SW_IOCTL_FILTER_GET:
+
+ uPROTOCOLFILTER = (PPROTOCOLFILTER)kmalloc(sizeof(PROTOCOLFILTER), GFP_KERNEL);
+ rtval = copy_from_user(uPROTOCOLFILTER, (PPROTOCOLFILTER)args, sizeof(PROTOCOLFILTER));
+ if (rtval != 0)
+ {
+ printk("ADM_SW_IOCTL_FILTER_ADD: copy from user FAILED!! \n");
+ return (-EFAULT);
+ }
+
+ if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter
+ uPROTOCOLFILTER->ip_p=00; //delet filter
+ uPROTOCOLFILTER->action=00; //delete filter
+ } //delete filter
+
+ ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7
+
+ if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
+ else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
+ }
+ else {
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
+ else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
+ }
+ if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7
+
+ ifx_sw_read(0x95, &val); //protocol filter action
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) {
+ uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
+ copy_to_user((PPROTOCOLFILTER)args, uPROTOCOLFILTER, sizeof(PROTOCOLFILTER));
+
+ }
+ else {
+ val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
+ // printk("%d----\n",val);
+ ifx_sw_write(0x95, val); //write protocol filter action
+ }
+
+ break;
+//adm6996i
+
+ /* others */
+ default:
+ return -EFAULT;
+ }
+ /* end of switch */
+ return 0;
+}
+
+/* Santosh: handle IGMP protocol filter ADD/DEL/GET */
+int adm_process_protocol_filter_request (unsigned int cmd, PPROTOCOLFILTER uPROTOCOLFILTER)
+{
+ unsigned int val; //6996i
+
+ if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter
+ uPROTOCOLFILTER->ip_p=00; //delet filter
+ uPROTOCOLFILTER->action=00; //delete filter
+ } //delete filter
+
+ ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7
+
+ if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
+ else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
+ }
+ else {
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
+ else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
+ }
+ if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7
+
+ ifx_sw_read(0x95, &val); //protocol filter action
+ if(cmd==ADM_SW_IOCTL_FILTER_GET) {
+ uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
+ }
+ else {
+ val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
+ ifx_sw_write(0x95, val); //write protocol filter action
+ }
+
+ return 0;
+}
+
+
+/* Santosh: function for MAC ENTRY ADD/DEL/GET */
+
+int adm_process_mac_table_request (unsigned int cmd, PMACENTRY mMACENTRY)
+{
+ unsigned int val; //6996i
+ unsigned int control[6] ; //6996i
+ unsigned int status[6] ; //6996i
+
+ // printk ("adm_process_mac_table_request: enter\n");
+
+ control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ;
+ control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ;
+ control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ;
+ control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
+
+ if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
+ else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
+ if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {
+ //initial the pointer to the first address
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ control[5]=0x030;//initial the first address
+ ifx_sw_write(0x11f,control[5]);
+
+
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+
+ } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)
+ if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
+ else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
+ else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
+ control[5]=0x02c;//search by the mac address field
+
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ ifx_sw_write(0x11a,control[0]);
+ ifx_sw_write(0x11b,control[1]);
+ ifx_sw_write(0x11c,control[2]);
+ ifx_sw_write(0x11d,control[3]);
+ ifx_sw_write(0x11e,control[4]);
+ ifx_sw_write(0x11f,control[5]);
+ val=0x8000;//busy ,status5[15]
+ while(val&0x8000){ //check busy ?
+ ifx_sw_read(0x125, &val);
+ }
+ val=((val&0x7000)>>12);//result ,status5[14:12]
+ mMACENTRY->result=val;
+
+ if (!val) {
+ printk(" Command OK!! \n");
+ if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
+ ifx_sw_read(0x120,&(status[0]));
+ ifx_sw_read(0x121,&(status[1]));
+ ifx_sw_read(0x122,&(status[2]));
+ ifx_sw_read(0x123,&(status[3]));
+ ifx_sw_read(0x124,&(status[4]));
+ ifx_sw_read(0x125,&(status[5]));
+
+
+ mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ;
+ mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ;
+ mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ;
+ mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
+ mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ;
+ mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
+ mMACENTRY->fid=(status[3]&0xf);
+ mMACENTRY->portmap=((status[3]>>4)&0x3f);
+ if (status[5]&0x2) {//static info_ctrl //status5[1]????
+ mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
+ mMACENTRY->info_type=1;
+ }
+ else {//not static age_timer
+ mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
+ mMACENTRY->info_type=0;
+ }
+//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
+ mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
+ mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
+ }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
+
+ }
+ else if (val==0x001)
+ printk(" All Entry Used!! \n");
+ else if (val==0x002)
+ printk(" Entry Not Found!! \n");
+ else if (val==0x003)
+ printk(" Try Next Entry!! \n");
+ else if (val==0x005)
+ printk(" Command Error!! \n");
+ else
+ printk(" UnKnown Error!! \n");
+
+ // printk ("adm_process_mac_table_request: Exit\n");
+ return 0;
+}
+
+/* Santosh: End of function for MAC ENTRY ADD/DEL*/
+struct file_operations adm_ops =
+{
+ read: adm_read,
+ write: adm_write,
+ open: adm_open,
+ release: adm_release,
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
+ unlocked_ioctl: adm_ioctl
+#else
+ ioctl: adm_ioctl
+#endif
+};
+
+int adm_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
+{
+ int len = 0;
+
+ len += sprintf(buf+len, " ************ Registers ************ \n");
+ *eof = 1;
+ return len;
+}
+
+int __init init_adm6996_module(void)
+{
+ unsigned int val = 000;
+ unsigned int val1 = 000;
+
+ printk("Loading ADM6996 driver... \n");
+
+ /* if running on adm5120 */
+ /* set GPIO 0~2 as adm6996 control pins */
+ //outl(0x003f3f00, 0x12000028);
+ /* enable switch port 5 (MII) as RMII mode (5120MAC <-> 6996MAC) */
+ //outl(0x18a, 0x12000030);
+ /* group adm5120 port 1 ~ 5 as VLAN0, port 5 & 6(CPU) as VLAN1 */
+ //outl(0x417e, 0x12000040);
+ /* end adm5120 fixup */
+#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
+ register_chrdev(69, "adm6996", &adm_ops);
+ AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x27be;
+ AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xfc;
+ adm6996_mode=adm6996i;
+ ifx_sw_read(0xa0, &val);
+ ifx_sw_read(0xa1, &val1);
+ val=((val1&0x0f)<<16)|val;
+ printk ("\nADM6996 SMI Mode-");
+ printk ("Chip ID:%5x \n ", val);
+#else //000001.joelin
+
+ AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x2c50;
+ AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xff;
+
+ AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL0) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+ AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL1) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+ AMAZON_SW_REG(AMAZON_GPIO_P1_OD) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
+
+ ifx_gpio_init();
+ register_chrdev(69, "adm6996", &adm_ops);
+ mdelay(100);
+
+ /* create proc entries */
+ // create_proc_read_entry("admide", 0, NULL, admide_proc, NULL);
+
+//joelin adm6996i support start
+ adm6996_mode=adm6996i;
+ ifx_sw_read(0xa0, &val);
+ adm6996_mode=adm6996l;
+ ifx_sw_read(0x200, &val1);
+// printk ("\n %0x \n",val1);
+ if ((val&0xfff0)==0x1020) {
+ printk ("\n ADM6996I .. \n");
+ adm6996_mode=adm6996i;
+ }
+ else if ((val1&0xffffff00)==0x71000) {//71010 or 71020
+ printk ("\n ADM6996LC .. \n");
+ adm6996_mode=adm6996lc;
+ }
+ else {
+ printk ("\n ADM6996L .. \n");
+ adm6996_mode=adm6996l;
+ }
+#endif //ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
+
+ if ((adm6996_mode==adm6996lc)||(adm6996_mode==adm6996i)){
+#if 0 /* removed by MarsLin */
+ ifx_sw_write(0x29,0xc000);
+ ifx_sw_write(0x30,0x0985);
+#else
+ ifx_sw_read(0xa0, &val);
+ if (val == 0x1021) // for both 6996LC and 6996I, only AB version need the patch
+ ifx_sw_write(0x29, 0x9000);
+ ifx_sw_write(0x30,0x0985);
+#endif
+ }
+//joelin adm6996i support end
+ return 0;
+}
+
+void __exit cleanup_adm6996_module(void)
+{
+ printk("Free ADM device driver... \n");
+
+ unregister_chrdev(69, "adm6996");
+
+ /* remove proc entries */
+ // remove_proc_entry("admide", NULL);
+}
+
+/* MarsLin, add start */
+#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
+ #define SET_BIT(reg, mask) reg |= (mask)
+ #define CLEAR_BIT(reg, mask) reg &= (~mask)
+ static int ifx_hw_reset(void)
+ {
+ CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL0),0x2000);
+ CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL1),0x2000);
+ SET_BIT((*AMAZON_GPIO_P0_OD),0x2000);
+ SET_BIT((*AMAZON_GPIO_P0_DIR), 0x2000);
+ CLEAR_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
+ mdelay(500);
+ SET_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
+ cleanup_adm6996_module();
+ return init_adm6996_module();
+ }
+ int (*adm6996_hw_reset)(void) = ifx_hw_reset;
+ EXPORT_SYMBOL(adm6996_hw_reset);
+ EXPORT_SYMBOL(adm6996_mode);
+ int (*adm6996_sw_read)(unsigned int addr, unsigned int *data) = ifx_sw_read;
+ EXPORT_SYMBOL(adm6996_sw_read);
+ int (*adm6996_sw_write)(unsigned int addr, unsigned int data) = ifx_sw_write;
+ EXPORT_SYMBOL(adm6996_sw_write);
+#endif
+/* MarsLin, add end */
+
+/* Santosh: for IGMP proxy/snooping, Begin */
+EXPORT_SYMBOL (adm_process_mac_table_request);
+EXPORT_SYMBOL (adm_process_protocol_filter_request);
+/* Santosh: for IGMP proxy/snooping, End */
+
+MODULE_DESCRIPTION("ADMtek 6996 Driver");
+MODULE_AUTHOR("Joe Lin <joe.lin@infineon.com>");
+MODULE_LICENSE("GPL");
+
+module_init(init_adm6996_module);
+module_exit(cleanup_adm6996_module);
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+//-----------------------------------------------------------------------
+/*
+ * Description:
+ * Driver for Infineon Amazon 3 port switch
+ */
+//-----------------------------------------------------------------------
+/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com]
+ * Created: 7-April-2004
+ */
+//-----------------------------------------------------------------------
+/* History
+ * Changed on: Jun 28, 2004
+ * Changed by: peng.liu@infineon.com
+ * Reason: add hardware flow control (HFC) (CONFIG_NET_HW_FLOWCONTROL)
+ *
+ * Changed on: Apr 6, 2005
+ * Changed by: mars.lin@infineon.com
+ * Reason : supoort port identification
+ */
+
+
+// copyright 2004-2005 infineon.com
+
+// copyright 2007 john crispin <blogic@openwrt.org>
+// copyright 2007 felix fietkau <nbd@openwrt.org>
+// copyright 2009 hauke mehrtens <hauke@hauke-m.de>
+
+
+// TODO
+// port vlan code from bcrm target... the tawainese code was scrapped due to crappyness
+// check all the mmi reg settings and possibly document them better
+// verify the ethtool code
+// remove the while(1) stuff
+// further clean up and rework ... but it works for now
+// check the mode[]=bridge stuff
+// verify that the ethaddr can be set from u-boot
+
+
+#ifndef __KERNEL__
+#define __KERNEL__
+#endif
+
+
+#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
+#define MODVERSIONS
+#endif
+
+#if defined(MODVERSIONS) && !defined(__GENKSYMS__)
+#include <linux/modversions.h>
+#endif
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/mii.h>
+#include <asm/uaccess.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/in6.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/ethtool.h>
+#include <asm/checksum.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/amazon_dma.h>
+#include <asm/amazon/amazon_sw.h>
+
+// how many mii ports are there ?
+#define AMAZON_SW_INT_NO 2
+
+#define ETHERNET_PACKET_DMA_BUFFER_SIZE 1536
+
+/***************************************** Module Parameters *************************************/
+static char mode[] = "bridge";
+module_param_array(mode, charp, NULL, 0);
+
+static int timeout = 1 * HZ;
+module_param(timeout, int, 0);
+
+int switch_init(struct net_device *dev);
+void switch_tx_timeout(struct net_device *dev);
+
+static struct net_device *switch_devs[2];
+
+int add_mac_table_entry(u64 entry_value)
+{
+ int i;
+ u32 data1, data2;
+
+ AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = ~7;
+
+ for (i = 0; i < 32; i++) {
+ AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | i;
+ while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
+ data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1);
+ data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
+ if ((data1 & (0x00700000)) != 0x00700000)
+ continue;
+ AMAZON_SW_REG32(AMAZON_SW_DATA1) = (u32) (entry_value >> 32);
+ AMAZON_SW_REG32(AMAZON_SW_DATA2) = (u32) entry_value & 0xffffffff;
+ AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | i;
+ while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
+ break;
+ }
+ AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) |= 7;
+ if (i >= 32)
+ return -1;
+ return OK;
+}
+
+u64 read_mac_table_entry(int index)
+{
+ u32 data1, data2;
+ u64 value;
+ AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | index;
+ while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
+ data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1) & 0xffffff;
+ data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
+ value = (u64) data1 << 32 | (u64) data2;
+ return value;
+}
+
+int write_mac_table_entry(int index, u64 value)
+{
+ u32 data1, data2;
+ data1 = (u32) (value >> 32);
+ data2 = (u32) value & 0xffffffff;
+ AMAZON_SW_REG32(AMAZON_SW_DATA1) = data1;
+ AMAZON_SW_REG32(AMAZON_SW_DATA2) = data2;
+ AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | index;
+ while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
+ return OK;
+}
+
+u32 get_mdio_reg(int phy_addr, int reg_num)
+{
+ u32 value;
+ AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (3 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16);
+ while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
+ value = AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & 0xffff;
+ return value;
+}
+
+int set_mdio_reg(int phy_addr, int reg_num, u32 value)
+{
+ AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (2 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16) | (value & 0xffff);
+ while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
+ return OK;
+}
+
+int auto_negotiate(int phy_addr)
+{
+ u32 value = 0;
+ value = get_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG);
+ set_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG, (value | RESTART_AUTO_NEGOTIATION | AUTO_NEGOTIATION_ENABLE | PHY_RESET));
+ return OK;
+}
+
+/*
+ In this version of switch driver, we split the dma channels for the switch.
+ 2 for port0 and 2 for port1. So that we can do internal bridging if necessary.
+ In switch mode, packets coming in from port0 or port1 is able to do Destination
+ address lookup. Packets coming from port0 with destination address of port1 should
+ not go to pmac again. The switch hardware should be able to do the switch in the hard
+ ware level. Packets coming from the pmac should not do the DA look up in that the
+ desination is already known for the kernel. It only needs to go to the correct NIC to
+ find its way out.
+ */
+int amazon_sw_chip_init(void)
+{
+ u32 tmp1;
+ int i = 0;
+
+ /* Aging tick select: 5mins */
+ tmp1 = 0xa0;
+ if (strcmp(mode, "bridge") == 0) {
+ // bridge mode, set militarised mode to 1, no learning!
+ tmp1 |= 0xC00;
+ } else {
+ // enable learning for P0 and P1,
+ tmp1 |= 3;
+ }
+
+ /* unknown broadcast/multicast/unicast to all ports */
+ AMAZON_SW_REG32(AMAZON_SW_UN_DEST) = 0x1ff;
+
+ AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = tmp1;
+
+ /* OCS:1 set OCS bit, split the two NIC in rx direction EDL:1 (enable DA lookup) */
+#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
+ AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x700;
+#else
+ AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x401;
+#endif
+
+ /* EPC: 1 split the two NIC in tx direction CRC is generated */
+ AMAZON_SW_REG32(AMAZON_SW_P2_CTL) = 0x6;
+
+ // for bi-directional
+ AMAZON_SW_REG32(AMAZON_SW_P0_WM) = 0x14141412;
+ AMAZON_SW_REG32(AMAZON_SW_P1_WM) = 0x14141412;
+ AMAZON_SW_REG32(AMAZON_SW_P2_WM) = 0x28282826;
+ AMAZON_SW_REG32(AMAZON_SW_GBL_WM) = 0x0;
+
+ AMAZON_SW_REG32(AMAZON_CGU_PLL0SR) = (AMAZON_SW_REG32(AMAZON_CGU_PLL0SR)) | 0x58000000;
+ // clock for PHY
+ AMAZON_SW_REG32(AMAZON_CGU_IFCCR) = (AMAZON_SW_REG32(AMAZON_CGU_IFCCR)) | 0x80000004;
+ // enable power for PHY
+ AMAZON_SW_REG32(AMAZON_PMU_PWDCR) = (AMAZON_SW_REG32(AMAZON_PMU_PWDCR)) | AMAZON_PMU_PWDCR_EPHY;
+ // set reverse MII, enable MDIO statemachine
+ AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG) = 0x800027bf;
+ while (1)
+ if (((AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG)) & 0x80000000) == 0)
+ break;
+ AMAZON_SW_REG32(AMAZON_SW_EPHY) = 0xff;
+
+ // auto negotiation
+ AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = 0x83e08000;
+ auto_negotiate(0x1f);
+
+ /* enable all ports */
+ AMAZON_SW_REG32(AMAZON_SW_PS_CTL) = 0x7;
+ for (i = 0; i < 32; i++)
+ write_mac_table_entry(i, 1 << 50);
+ return 0;
+}
+
+static unsigned char my_ethaddr[MAX_ADDR_LEN];
+/* need to get the ether addr from u-boot */
+static int __init ethaddr_setup(char *line)
+{
+ char *ep;
+ int i;
+
+ memset(my_ethaddr, 0, MAX_ADDR_LEN);
+ for (i = 0; i < 6; i++) {
+ my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0;
+ if (line)
+ line = (*ep) ? ep + 1 : ep;
+ }
+ printk(KERN_INFO "amazon_mii0: mac address %2x-%2x-%2x-%2x-%2x-%2x \n", my_ethaddr[0], my_ethaddr[1], my_ethaddr[2], my_ethaddr[3], my_ethaddr[4], my_ethaddr[5]);
+ return 0;
+}
+
+__setup("ethaddr=", ethaddr_setup);
+
+static void open_rx_dma(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ struct dma_device_info *dma_dev = priv->dma_device;
+ int i;
+
+ for (i = 0; i < dma_dev->num_rx_chan; i++)
+ dma_dev->rx_chan[i].control = 1;
+ dma_device_update_rx(dma_dev);
+}
+
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+static void close_rx_dma(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ struct dma_device_info *dma_dev = priv->dma_device;
+ int i;
+
+ for (i = 0; i < dma_dev->num_rx_chan; i++)
+ dma_dev->rx_chan[i].control = 0;
+ dma_device_update_rx(dma_dev);
+}
+
+void amazon_xon(struct net_device *dev)
+{
+ unsigned long flag;
+ local_irq_save(flag);
+ open_rx_dma(dev);
+ local_irq_restore(flag);
+}
+#endif
+
+int switch_open(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ if (!strcmp(dev->name, "eth1")) {
+ priv->mdio_phy_addr = PHY0_ADDR;
+ }
+ open_rx_dma(dev);
+
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ if ((priv->fc_bit = netdev_register_fc(dev, amazon_xon)) == 0) {
+ printk(KERN_WARNING "amazon_mii0: Hardware Flow Control register fails\n");
+ }
+#endif
+
+ netif_start_queue(dev);
+ return OK;
+}
+
+int switch_release(struct net_device *dev)
+{
+ int i;
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ struct dma_device_info *dma_dev = priv->dma_device;
+
+ for (i = 0; i < dma_dev->num_tx_chan; i++)
+ dma_dev->tx_chan[i].control = 0;
+ for (i = 0; i < dma_dev->num_rx_chan; i++)
+ dma_dev->rx_chan[i].control = 0;
+
+ dma_device_update(dma_dev);
+
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ if (priv->fc_bit) {
+ netdev_unregister_fc(priv->fc_bit);
+ }
+#endif
+ netif_stop_queue(dev);
+
+ return OK;
+}
+
+
+void switch_rx(struct net_device *dev, int len, struct sk_buff *skb)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ int mit_sel = 0;
+#endif
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ mit_sel = netif_rx(skb);
+ switch (mit_sel) {
+ case NET_RX_SUCCESS:
+ case NET_RX_CN_LOW:
+ case NET_RX_CN_MOD:
+ break;
+ case NET_RX_CN_HIGH:
+ break;
+ case NET_RX_DROP:
+ if ((priv->fc_bit)
+ && (!test_and_set_bit(priv->fc_bit, &netdev_fc_xoff))) {
+ close_rx_dma(dev);
+ }
+ break;
+ }
+#else
+ netif_rx(skb);
+#endif
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes += len;
+ return;
+}
+
+int asmlinkage switch_hw_tx(char *buf, int len, struct net_device *dev)
+{
+ struct switch_priv *priv = netdev_priv(dev);
+ struct dma_device_info *dma_dev = priv->dma_device;
+
+ dma_dev->current_tx_chan = 0;
+ return dma_device_write(dma_dev, buf, len, priv->skb);
+}
+
+int asmlinkage switch_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ int len;
+ char *data;
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ data = skb->data;
+ priv->skb = skb;
+ dev->trans_start = jiffies;
+
+ if (switch_hw_tx(data, len, dev) != len) {
+ dev_kfree_skb_any(skb);
+ return OK;
+ }
+
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += len;
+ return OK;
+}
+
+void switch_tx_timeout(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ priv->stats.tx_errors++;
+ netif_wake_queue(dev);
+ return;
+}
+
+void negotiate(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ unsigned short data = get_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG);
+
+ data &= ~(MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD);
+
+ switch (priv->current_speed_selection) {
+ case 10:
+ if (priv->current_duplex == full)
+ data |= MDIO_ADVERT_10_FD;
+ else if (priv->current_duplex == half)
+ data |= MDIO_ADVERT_10_HD;
+ else
+ data |= MDIO_ADVERT_10_HD | MDIO_ADVERT_10_FD;
+ break;
+
+ case 100:
+ if (priv->current_duplex == full)
+ data |= MDIO_ADVERT_100_FD;
+ else if (priv->current_duplex == half)
+ data |= MDIO_ADVERT_100_HD;
+ else
+ data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD;
+ break;
+
+ case 0: /* Auto */
+ if (priv->current_duplex == full)
+ data |= MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD;
+ else if (priv->current_duplex == half)
+ data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_10_HD;
+ else
+ data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
+ break;
+
+ default: /* assume autoneg speed and duplex */
+ data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
+ }
+
+ set_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG, data);
+
+ /* Renegotiate with link partner */
+
+ data = get_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG);
+ data |= MDIO_BC_NEGOTIATE;
+
+ set_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG, data);
+
+}
+
+
+void set_duplex(struct net_device *dev, enum duplex new_duplex)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ if (new_duplex != priv->current_duplex) {
+ priv->current_duplex = new_duplex;
+ negotiate(dev);
+ }
+}
+
+void set_speed(struct net_device *dev, unsigned long speed)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ priv->current_speed_selection = speed;
+ negotiate(dev);
+}
+
+static int switch_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ struct ethtool_cmd ecmd;
+
+ if (copy_from_user(&ecmd, ifr->ifr_data, sizeof(ecmd)))
+ return -EFAULT;
+
+ switch (ecmd.cmd) {
+ case ETHTOOL_GSET:
+ memset((void *) &ecmd, 0, sizeof(ecmd));
+ ecmd.supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
+ ecmd.port = PORT_TP;
+ ecmd.transceiver = XCVR_EXTERNAL;
+ ecmd.phy_address = priv->mdio_phy_addr;
+
+ ecmd.speed = priv->current_speed;
+
+ ecmd.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+
+ ecmd.advertising = ADVERTISED_TP;
+ if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
+ ecmd.advertising |= ADVERTISED_Autoneg;
+ else {
+ ecmd.advertising |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
+ if (priv->current_speed_selection == 10)
+ ecmd.advertising &= ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full);
+ else if (priv->current_speed_selection == 100)
+ ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full);
+ if (priv->current_duplex == half)
+ ecmd.advertising &= ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full);
+ else if (priv->current_duplex == full)
+ ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half);
+ }
+ ecmd.autoneg = AUTONEG_ENABLE;
+ if (copy_to_user(ifr->ifr_data, &ecmd, sizeof(ecmd)))
+ return -EFAULT;
+ break;
+
+ case ETHTOOL_SSET:
+ if (!capable(CAP_NET_ADMIN)) {
+ return -EPERM;
+ }
+ if (ecmd.autoneg == AUTONEG_ENABLE) {
+ set_duplex(dev, autoneg);
+ set_speed(dev, 0);
+ } else {
+ set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full);
+ set_speed(dev, ecmd.speed == SPEED_10 ? 10 : 100);
+ }
+ break;
+
+ case ETHTOOL_GDRVINFO:
+ {
+ struct ethtool_drvinfo info;
+ memset((void *) &info, 0, sizeof(info));
+ strncpy(info.driver, "AMAZONE", sizeof(info.driver) - 1);
+ strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1);
+ strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1);
+ info.regdump_len = 0;
+ info.eedump_len = 0;
+ info.testinfo_len = 0;
+ if (copy_to_user(ifr->ifr_data, &info, sizeof(info)))
+ return -EFAULT;
+ }
+ break;
+ case ETHTOOL_NWAY_RST:
+ if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
+ negotiate(dev);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ break;
+ }
+ return 0;
+}
+
+
+
+int mac_table_tools_ioctl(struct net_device *dev, struct mac_table_req *req)
+{
+ int cmd;
+ int i;
+ cmd = req->cmd;
+ switch (cmd) {
+ case RESET_MAC_TABLE:
+ for (i = 0; i < 32; i++) {
+ write_mac_table_entry(i, 0);
+ }
+ break;
+ case READ_MAC_ENTRY:
+ req->entry_value = read_mac_table_entry(req->index);
+ break;
+ case WRITE_MAC_ENTRY:
+ write_mac_table_entry(req->index, req->entry_value);
+ break;
+ case ADD_MAC_ENTRY:
+ add_mac_table_entry(req->entry_value);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+/*
+ the ioctl for the switch driver is developed in the conventional way
+ the control type falls into some basic categories, among them, the
+ SIOCETHTOOL is the traditional eth interface. VLAN_TOOLS and
+ MAC_TABLE_TOOLS are designed specifically for amazon chip. User
+ should be aware of the data structures used in these interfaces.
+*/
+int switch_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct data_req *switch_data_req = (struct data_req *) ifr->ifr_data;
+ struct mac_table_req *switch_mac_table_req;
+ switch (cmd) {
+ case SIOCETHTOOL:
+ switch_ethtool_ioctl(dev, ifr);
+ break;
+ case SIOCGMIIPHY: /* Get PHY address */
+ break;
+ case SIOCGMIIREG: /* Read MII register */
+ break;
+ case SIOCSMIIREG: /* Write MII register */
+ break;
+ case SET_ETH_SPEED_10: /* 10 Mbps */
+ break;
+ case SET_ETH_SPEED_100: /* 100 Mbps */
+ break;
+ case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */
+ break;
+ case SET_ETH_DUPLEX_HALF: /* Half duplex. */
+ break;
+ case SET_ETH_DUPLEX_FULL: /* Full duplex. */
+ break;
+ case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex */
+ break;
+ case SET_ETH_REG:
+ AMAZON_SW_REG32(switch_data_req->index) = switch_data_req->value;
+ break;
+ case MAC_TABLE_TOOLS:
+ switch_mac_table_req = (struct mac_table_req *) ifr->ifr_data;
+ mac_table_tools_ioctl(dev, switch_mac_table_req);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+struct net_device_stats *switch_stats(struct net_device *dev)
+{
+ struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
+ return &priv->stats;
+}
+
+int switch_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if (new_mtu >= 1516)
+ new_mtu = 1516;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+int switch_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
+{
+ u8 *buf = NULL;
+ int len = 0;
+ struct sk_buff *skb = NULL;
+
+ len = dma_device_read(dma_dev, &buf, (void **) &skb);
+
+ if (len >= 0x600) {
+ printk(KERN_WARNING "amazon_mii0: packet too large %d\n", len);
+ goto switch_hw_receive_err_exit;
+ }
+
+ /* remove CRC */
+ len -= 4;
+ if (skb == NULL) {
+ printk(KERN_WARNING "amazon_mii0: cannot restore pointer\n");
+ goto switch_hw_receive_err_exit;
+ }
+ if (len > (skb->end - skb->tail)) {
+ printk(KERN_WARNING "amazon_mii0: BUG, len:%d end:%p tail:%p\n", (len + 4), skb->end, skb->tail);
+ goto switch_hw_receive_err_exit;
+ }
+ skb_put(skb, len);
+ skb->dev = dev;
+ switch_rx(dev, len, skb);
+ return OK;
+
+ switch_hw_receive_err_exit:
+ if (skb)
+ dev_kfree_skb_any(skb);
+ return -EIO;
+}
+
+int dma_intr_handler(struct dma_device_info *dma_dev, int status)
+{
+ struct net_device *dev;
+
+ dev = dma_dev->priv;
+ switch (status) {
+ case RCV_INT:
+ switch_hw_receive(dev, dma_dev);
+ break;
+ case TX_BUF_FULL_INT:
+ netif_stop_queue(dev);
+ break;
+ case TRANSMIT_CPT_INT:
+ netif_wake_queue(dev);
+ break;
+ }
+ return OK;
+}
+
+/* reserve 2 bytes in front of data pointer*/
+u8 *dma_buffer_alloc(int len, int *byte_offset, void **opt)
+{
+ u8 *buffer = NULL;
+ struct sk_buff *skb = NULL;
+ skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
+ if (skb == NULL) {
+ return NULL;
+ }
+ buffer = (u8 *) (skb->data);
+ skb_reserve(skb, 2);
+ *(int *) opt = (int) skb;
+ *byte_offset = 2;
+ return buffer;
+}
+
+int dma_buffer_free(u8 * dataptr, void *opt)
+{
+ struct sk_buff *skb = NULL;
+ if (opt == NULL) {
+ kfree(dataptr);
+ } else {
+ skb = (struct sk_buff *) opt;
+ dev_kfree_skb_any(skb);
+ }
+ return OK;
+}
+
+int init_dma_device(_dma_device_info * dma_dev, struct net_device *dev)
+{
+ int i;
+ int num_tx_chan, num_rx_chan;
+ if (strcmp(dma_dev->device_name, "switch1") == 0) {
+ num_tx_chan = 1;
+ num_rx_chan = 2;
+ } else {
+ num_tx_chan = 1;
+ num_rx_chan = 2;
+ }
+ dma_dev->priv = dev;
+
+ dma_dev->weight = 1;
+ dma_dev->num_tx_chan = num_tx_chan;
+ dma_dev->num_rx_chan = num_rx_chan;
+ dma_dev->ack = 1;
+ dma_dev->tx_burst_len = 4;
+ dma_dev->rx_burst_len = 4;
+ for (i = 0; i < dma_dev->num_tx_chan; i++) {
+ dma_dev->tx_chan[i].weight = QOS_DEFAULT_WGT;
+ dma_dev->tx_chan[i].desc_num = 10;
+ dma_dev->tx_chan[i].packet_size = 0;
+ dma_dev->tx_chan[i].control = 0;
+ }
+ for (i = 0; i < num_rx_chan; i++) {
+ dma_dev->rx_chan[i].weight = QOS_DEFAULT_WGT;
+ dma_dev->rx_chan[i].desc_num = 10;
+ dma_dev->rx_chan[i].packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
+ dma_dev->rx_chan[i].control = 0;
+ }
+ dma_dev->intr_handler = dma_intr_handler;
+ dma_dev->buffer_alloc = dma_buffer_alloc;
+ dma_dev->buffer_free = dma_buffer_free;
+ return 0;
+}
+
+int switch_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ return OK;
+}
+
+static const struct net_device_ops amazon_mii_ops = {
+ .ndo_init = switch_init,
+ .ndo_open = switch_open,
+ .ndo_stop = switch_release,
+ .ndo_start_xmit = switch_tx,
+ .ndo_do_ioctl = switch_ioctl,
+ .ndo_get_stats = switch_stats,
+ .ndo_change_mtu = switch_change_mtu,
+ .ndo_set_mac_address = switch_set_mac_address,
+ .ndo_tx_timeout = switch_tx_timeout,
+};
+
+int switch_init(struct net_device *dev)
+{
+ u64 retval = 0;
+ int i;
+ int result;
+ struct switch_priv *priv;
+ ether_setup(dev); /* assign some of the fields */
+ printk(KERN_INFO "amazon_mii0: %s up using ", dev->name);
+ dev->watchdog_timeo = timeout;
+
+ priv = netdev_priv(dev);
+ priv->dma_device = (struct dma_device_info *) kmalloc(sizeof(struct dma_device_info), GFP_KERNEL);
+ if (priv->num == 0) {
+ sprintf(priv->dma_device->device_name, "switch1");
+ } else if (priv->num == 1) {
+ sprintf(priv->dma_device->device_name, "switch2");
+ }
+ printk("\"%s\"\n", priv->dma_device->device_name);
+ init_dma_device(priv->dma_device, dev);
+ result = dma_device_register(priv->dma_device);
+
+ /* read the mac address from the mac table and put them into the mac table. */
+ for (i = 0; i < 6; i++) {
+ retval += my_ethaddr[i];
+ }
+ /* ethaddr not set in u-boot ? */
+ if (retval == 0) {
+ dev->dev_addr[0] = 0x00;
+ dev->dev_addr[1] = 0x20;
+ dev->dev_addr[2] = 0xda;
+ dev->dev_addr[3] = 0x86;
+ dev->dev_addr[4] = 0x23;
+ dev->dev_addr[5] = 0x74 + (unsigned char) priv->num;
+ } else {
+ for (i = 0; i < 6; i++) {
+ dev->dev_addr[i] = my_ethaddr[i];
+ }
+ dev->dev_addr[5] += +(unsigned char) priv->num;
+ }
+ return OK;
+}
+
+static int amazon_mii_probe(struct platform_device *dev)
+{
+ int i = 0, result, device_present = 0;
+ struct switch_priv *priv;
+
+ for (i = 0; i < AMAZON_SW_INT_NO; i++) {
+ switch_devs[i] = alloc_etherdev(sizeof(struct switch_priv));
+ switch_devs[i]->netdev_ops = &amazon_mii_ops;
+ strcpy(switch_devs[i]->name, "eth%d");
+ priv = (struct switch_priv *) netdev_priv(switch_devs[i]);
+ priv->num = i;
+ if ((result = register_netdev(switch_devs[i])))
+ printk(KERN_WARNING "amazon_mii0: error %i registering device \"%s\"\n", result, switch_devs[i]->name);
+ else
+ device_present++;
+ }
+ amazon_sw_chip_init();
+ return device_present ? 0 : -ENODEV;
+}
+
+static int amazon_mii_remove(struct platform_device *dev)
+{
+ int i;
+ struct switch_priv *priv;
+ for (i = 0; i < AMAZON_SW_INT_NO; i++) {
+ priv = netdev_priv(switch_devs[i]);
+ if (priv->dma_device) {
+ dma_device_unregister(priv->dma_device);
+ kfree(priv->dma_device);
+ }
+ kfree(netdev_priv(switch_devs[i]));
+ unregister_netdev(switch_devs[i]);
+ }
+ return 0;
+}
+
+static struct platform_driver amazon_mii_driver = {
+ .probe = amazon_mii_probe,
+ .remove = amazon_mii_remove,
+ .driver = {
+ .name = "amazon_mii0",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amazon_mii_init(void)
+{
+ int ret = platform_driver_register(&amazon_mii_driver);
+ if (ret)
+ printk(KERN_WARNING "amazon_mii0: Error registering platfom driver!\n");
+ return ret;
+}
+
+static void __exit amazon_mii_cleanup(void)
+{
+ platform_driver_unregister(&amazon_mii_driver);
+}
+
+module_init(amazon_mii_init);
+module_exit(amazon_mii_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wu Qi Ming");
+MODULE_DESCRIPTION("ethernet driver for AMAZON boards");
+
+++ /dev/null
-/*
- * Driver for AMAZONASC serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/serial_s3c2400.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2004 Infineon IFAP DC COM CPE
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/serial.h>
-
-#define PORT_AMAZONASC 111
-
-#include <linux/serial_core.h>
-
-#define UART_NR 1
-
-#define UART_DUMMY_UER_RX 1
-
-#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR
-#define CALLOUT_AMAZONASC_MAJOR TTYAUX_MAJOR
-#define SERIAL_AMAZONASC_MINOR 64
-#define SERIAL_AMAZONASC_NR UART_NR
-
-static void amazonasc_tx_chars(struct uart_port *port);
-static struct uart_port amazonasc_ports[UART_NR];
-static struct uart_driver amazonasc_reg;
-static unsigned int uartclk = 0;
-
-static void amazonasc_stop_tx(struct uart_port *port)
-{
- /* fifo underrun shuts up after firing once */
- return;
-}
-
-static void amazonasc_start_tx(struct uart_port *port)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- amazonasc_tx_chars(port);
- local_irq_restore(flags);
-
- return;
-}
-
-static void amazonasc_stop_rx(struct uart_port *port)
-{
- /* clear the RX enable bit */
- amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON);
-}
-
-static void amazonasc_enable_ms(struct uart_port *port)
-{
- /* no modem signals */
- return;
-}
-
-#include <linux/version.h>
-
-static void
-amazonasc_rx_chars(struct uart_port *port)
-{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
- struct tty_struct *tty = port->state->port.tty;
-#else
- struct tty_struct *tty = port->info->port.tty;
-#endif
- unsigned int ch = 0, rsr = 0, fifocnt;
-
- fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
- while (fifocnt--)
- {
- u8 flag = TTY_NORMAL;
- ch = amazon_readl(AMAZON_ASC_RBUF);
- rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX;
- tty_flip_buffer_push(tty);
- port->icount.rx++;
-
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- if (rsr & ASCCON_ANY) {
- if (rsr & ASCCON_PE) {
- port->icount.parity++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE);
- } else if (rsr & ASCCON_FE) {
- port->icount.frame++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE);
- }
- if (rsr & ASCCON_OE) {
- port->icount.overrun++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE);
- }
-
- rsr &= port->read_status_mask;
-
- if (rsr & ASCCON_PE)
- flag = TTY_PARITY;
- else if (rsr & ASCCON_FE)
- flag = TTY_FRAME;
- }
-
- if ((rsr & port->ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
-
- if (rsr & ASCCON_OE)
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
- if (ch != 0)
- tty_flip_buffer_push(tty);
-
- return;
-}
-
-
-static void amazonasc_tx_chars(struct uart_port *port)
-{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
- struct circ_buf *xmit = &port->state->xmit;
-#else
- struct circ_buf *xmit = &port->info->xmit;
-#endif
-
- if (uart_tx_stopped(port)) {
- amazonasc_stop_tx(port);
- return;
- }
-
- while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL)
- {
- if (port->x_char) {
- amazon_writel(port->x_char, AMAZON_ASC_TBUF);
- port->icount.tx++;
- port->x_char = 0;
- continue;
- }
-
- if (uart_circ_empty(xmit))
- break;
-
- amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-}
-
-static irqreturn_t amazonasc_tx_int(int irq, void *port)
-{
- amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1);
- amazonasc_start_tx(port);
-
- /* clear any pending interrupts */
- amazon_writel_masked(AMAZON_ASC_WHBCON,
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t amazonasc_er_int(int irq, void *port)
-{
- /* clear any pending interrupts */
- amazon_writel_masked(AMAZON_ASC_WHBCON,
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t amazonasc_rx_int(int irq, void *port)
-{
- amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1);
- amazonasc_rx_chars((struct uart_port *) port);
- return IRQ_HANDLED;
-}
-
-static u_int amazonasc_tx_empty(struct uart_port *port)
-{
- int status;
-
- /*
- * FSTAT tells exactly how many bytes are in the FIFO.
- * The question is whether we really need to wait for all
- * 16 bytes to be transmitted before reporting that the
- * transmitter is empty.
- */
- status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
- return status ? 0 : TIOCSER_TEMT;
-}
-
-static u_int amazonasc_get_mctrl(struct uart_port *port)
-{
- /* no modem control signals - the readme says to pretend all are set */
- return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR;
-}
-
-static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl)
-{
- /* no modem control - just return */
- return;
-}
-
-static void amazonasc_break_ctl(struct uart_port *port, int break_state)
-{
- /* no way to send a break */
- return;
-}
-
-static int amazonasc_startup(struct uart_port *port)
-{
- unsigned int con = 0;
- unsigned long flags;
- int retval;
-
- /* this assumes: CON.BRS = CON.FDE = 0 */
- if (uartclk == 0)
- uartclk = amazon_get_fpi_hz();
-
- amazonasc_ports[0].uartclk = uartclk;
-
- local_irq_save(flags);
-
- /* this setup was probably already done in u-boot */
- /* ASC and GPIO Port 1 bits 3 and 4 share the same pins
- * P1.3 (RX) in, Alternate 10
- * P1.4 (TX) in, Alternate 10
- */
- amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); //P1.4 output, P1.3 input
- amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); //ALTSETL0 11
- amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0); //ALTSETL1 00
- amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10);
-
- /* set up the CLC */
- amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0);
- amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET);
-
- /* asynchronous mode */
- con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN;
-
- /* choose the line - there's only one */
- amazon_writel(0, AMAZON_ASC_PISEL);
- amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
- AMAZON_ASC_TXFCON);
- amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
- AMAZON_ASC_RXFCON);
- wmb();
-
- amazon_writel_masked(AMAZON_ASC_CON, con, con);
-
- retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port);
- if (retval){
- printk("failed to request amazonasc_rx_int\n");
- return retval;
- }
- retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port);
- if (retval){
- printk("failed to request amazonasc_tx_int\n");
- goto err1;
- }
-
- retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port);
- if (retval){
- printk("failed to request amazonasc_er_int\n");
- goto err2;
- }
-
- local_irq_restore(flags);
- return 0;
-
-err2:
- free_irq(AMAZONASC_TIR, port);
-
-err1:
- free_irq(AMAZONASC_RIR, port);
- local_irq_restore(flags);
- return retval;
-}
-
-static void amazonasc_shutdown(struct uart_port *port)
-{
- free_irq(AMAZONASC_RIR, port);
- free_irq(AMAZONASC_TIR, port);
- free_irq(AMAZONASC_EIR, port);
- /*
- * disable the baudrate generator to disable the ASC
- */
- amazon_writel(0, AMAZON_ASC_CON);
-
- /* flush and then disable the fifos */
- amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU);
- amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0);
- amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU);
- amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0);
-}
-
-static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
-{
- unsigned int cflag;
- unsigned int iflag;
- unsigned int baud, quot;
- unsigned int con = 0;
- unsigned long flags;
-
- cflag = new->c_cflag;
- iflag = new->c_iflag;
-
- /* byte size and parity */
- switch (cflag & CSIZE) {
- /* 7 bits are always with parity */
- case CS7: con = ASCCON_M_7ASYNCPAR; break;
- /* the ASC only suports 7 and 8 bits */
- case CS5:
- case CS6:
- default:
- if (cflag & PARENB)
- con = ASCCON_M_8ASYNCPAR;
- else
- con = ASCCON_M_8ASYNC;
- break;
- }
- if (cflag & CSTOPB)
- con |= ASCCON_STP;
- if (cflag & PARENB) {
- if (!(cflag & PARODD))
- con &= ~ASCCON_ODD;
- else
- con |= ASCCON_ODD;
- }
-
- port->read_status_mask = ASCCON_OE;
- if (iflag & INPCK)
- port->read_status_mask |= ASCCON_FE | ASCCON_PE;
-
- port->ignore_status_mask = 0;
- if (iflag & IGNPAR)
- port->ignore_status_mask |= ASCCON_FE | ASCCON_PE;
-
- if (iflag & IGNBRK) {
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (iflag & IGNPAR)
- port->ignore_status_mask |= ASCCON_OE;
- }
-
- /*
- * Ignore all characters if CREAD is not set.
- */
- if ((cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_DUMMY_UER_RX;
-
- /* set error signals - framing, parity and overrun */
- con |= ASCCON_FEN;
- con |= ASCCON_OEN;
- con |= ASCCON_PEN;
- /* enable the receiver */
- con |= ASCCON_REN;
-
- /* block the IRQs */
- local_irq_save(flags);
-
- /* set up CON */
- amazon_writel(con, AMAZON_ASC_CON);
-
- /* Set baud rate - take a divider of 2 into account */
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
- quot = quot/2 - 1;
-
- /* the next 3 probably already happened when we set CON above */
- /* disable the baudrate generator */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0);
- /* make sure the fractional divider is off */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0);
- /* set up to use divisor of 2 */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0);
- /* now we can write the new baudrate into the register */
- amazon_writel(quot, AMAZON_ASC_BTR);
- /* turn the baudrate generator back on */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R);
-
- local_irq_restore(flags);
-}
-
-static const char *amazonasc_type(struct uart_port *port)
-{
- return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'
- */
-static void amazonasc_release_port(struct uart_port *port)
-{
- return;
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int amazonasc_request_port(struct uart_port *port)
-{
- return 0;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void amazonasc_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE) {
- port->type = PORT_AMAZONASC;
- amazonasc_request_port(port);
- }
-}
-
-/*
- * verify the new serial_struct (for TIOCSSERIAL).
- */
-static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- int ret = 0;
- if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC)
- ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
- ret = -EINVAL;
- if (ser->baud_base < 9600)
- ret = -EINVAL;
- return ret;
-}
-
-static struct uart_ops amazonasc_pops = {
- .tx_empty = amazonasc_tx_empty,
- .set_mctrl = amazonasc_set_mctrl,
- .get_mctrl = amazonasc_get_mctrl,
- .stop_tx = amazonasc_stop_tx,
- .start_tx = amazonasc_start_tx,
- .stop_rx = amazonasc_stop_rx,
- .enable_ms = amazonasc_enable_ms,
- .break_ctl = amazonasc_break_ctl,
- .startup = amazonasc_startup,
- .shutdown = amazonasc_shutdown,
- .set_termios = amazonasc_set_termios,
- .type = amazonasc_type,
- .release_port = amazonasc_release_port,
- .request_port = amazonasc_request_port,
- .config_port = amazonasc_config_port,
- .verify_port = amazonasc_verify_port,
-};
-
-static struct uart_port amazonasc_ports[UART_NR] = {
- {
- membase: (void *)AMAZON_ASC,
- mapbase: AMAZON_ASC,
- iotype: SERIAL_IO_MEM,
- irq: AMAZONASC_RIR, /* RIR */
- uartclk: 0, /* filled in dynamically */
- fifosize: 16,
- unused: { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */
- type: PORT_AMAZONASC,
- ops: &amazonasc_pops,
- flags: ASYNC_BOOT_AUTOCONF,
- },
-};
-
-static void amazonasc_console_write(struct console *co, const char *s, u_int count)
-{
- int i, fifocnt;
- unsigned long flags;
- local_irq_save(flags);
- for (i = 0; i < count;)
- {
- /* wait until the FIFO is not full */
- do
- {
- fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF;
- } while (fifocnt == AMAZONASC_TXFIFO_FULL);
- if (s[i] == '\0')
- {
- break;
- }
- if (s[i] == '\n')
- {
- amazon_writel('\r', AMAZON_ASC_TBUF);
- do
- {
- fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) &
- ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF;
- } while (fifocnt == AMAZONASC_TXFIFO_FULL);
- }
- amazon_writel(s[i], AMAZON_ASC_TBUF);
- i++;
- }
-
- local_irq_restore(flags);
-}
-
-static void __init
-amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-{
- u_int lcr_h;
-
- lcr_h = amazon_readl(AMAZON_ASC_CON);
- /* do this only if the ASC is turned on */
- if (lcr_h & ASCCON_R) {
- u_int quot, div, fdiv, frac;
-
- *parity = 'n';
- if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR ||
- (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) {
- if (lcr_h & ASCCON_ODD)
- *parity = 'o';
- else
- *parity = 'e';
- }
-
- if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR)
- *bits = 7;
- else
- *bits = 8;
-
- quot = amazon_readl(AMAZON_ASC_BTR) + 1;
-
- /* this gets hairy if the fractional divider is used */
- if (lcr_h & ASCCON_FDE)
- {
- div = 1;
- fdiv = amazon_readl(AMAZON_ASC_FDV);
- if (fdiv == 0)
- fdiv = 512;
- frac = 512;
- }
- else
- {
- div = lcr_h & ASCCON_BRS ? 3 : 2;
- fdiv = frac = 1;
- }
- /*
- * This doesn't work exactly because we use integer
- * math to calculate baud which results in rounding
- * errors when we try to go from quot -> baud !!
- * Try to make this work for both the fractional divider
- * and the simple divider. Also try to avoid rounding
- * errors using integer math.
- */
-
- *baud = frac * (port->uartclk / (div * 512 * 16 * quot));
- if (*baud > 1100 && *baud < 2400)
- *baud = 1200;
- if (*baud > 2300 && *baud < 4800)
- *baud = 2400;
- if (*baud > 4700 && *baud < 9600)
- *baud = 4800;
- if (*baud > 9500 && *baud < 19200)
- *baud = 9600;
- if (*baud > 19000 && *baud < 38400)
- *baud = 19200;
- if (*baud > 38400 && *baud < 57600)
- *baud = 38400;
- if (*baud > 57600 && *baud < 115200)
- *baud = 57600;
- if (*baud > 115200 && *baud < 230400)
- *baud = 115200;
- }
-}
-
-static int __init amazonasc_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 115200;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /* this assumes: CON.BRS = CON.FDE = 0 */
- if (uartclk == 0)
- uartclk = amazon_get_fpi_hz();
- co->index = 0;
- port = &amazonasc_ports[0];
- amazonasc_ports[0].uartclk = uartclk;
- amazonasc_ports[0].type = PORT_AMAZONASC;
-
- if (options){
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- }
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver amazonasc_reg;
-static struct console amazonasc_console = {
- name: "ttyS",
- write: amazonasc_console_write,
- device: uart_console_device,
- setup: amazonasc_console_setup,
- flags: CON_PRINTBUFFER,
- index: -1,
- data: &amazonasc_reg,
-};
-
-static struct uart_driver amazonasc_reg = {
- .owner = THIS_MODULE,
- .driver_name = "serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = UART_NR,
- .cons = &amazonasc_console,
-};
-
-static int __init amazon_asc_probe(struct platform_device *dev)
-{
- unsigned char res;
- uart_register_driver(&amazonasc_reg);
- res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]);
- return res;
-}
-
-static int amazon_asc_remove(struct platform_device *dev)
-{
- uart_unregister_driver(&amazonasc_reg);
- return 0;
-}
-
-static struct platform_driver amazon_asc_driver = {
- .probe = amazon_asc_probe,
- .remove = amazon_asc_remove,
- .driver = {
- .name = "amazon_asc",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init amazon_asc_init(void)
-{
- int ret = platform_driver_register(&amazon_asc_driver);
- if (ret)
- printk(KERN_WARNING "amazon_asc: error registering platfom driver!\n");
- return ret;
-}
-
-static void __exit amazon_asc_cleanup(void)
-{
- platform_driver_unregister(&amazon_asc_driver);
-}
-
-module_init(amazon_asc_init);
-module_exit(amazon_asc_cleanup);
-
-MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin");
-MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver");
-MODULE_LICENSE("GPL");
-
--- /dev/null
+/*
+ * Driver for AMAZONASC serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/serial_s3c2400.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2004 Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+#include <asm/amazon/amazon.h>
+#include <asm/amazon/irq.h>
+#include <asm/amazon/serial.h>
+
+#define PORT_AMAZONASC 111
+
+#include <linux/serial_core.h>
+
+#define UART_NR 1
+
+#define UART_DUMMY_UER_RX 1
+
+#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR
+#define CALLOUT_AMAZONASC_MAJOR TTYAUX_MAJOR
+#define SERIAL_AMAZONASC_MINOR 64
+#define SERIAL_AMAZONASC_NR UART_NR
+
+static void amazonasc_tx_chars(struct uart_port *port);
+static struct uart_port amazonasc_ports[UART_NR];
+static struct uart_driver amazonasc_reg;
+static unsigned int uartclk = 0;
+
+static void amazonasc_stop_tx(struct uart_port *port)
+{
+ /* fifo underrun shuts up after firing once */
+ return;
+}
+
+static void amazonasc_start_tx(struct uart_port *port)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ amazonasc_tx_chars(port);
+ local_irq_restore(flags);
+
+ return;
+}
+
+static void amazonasc_stop_rx(struct uart_port *port)
+{
+ /* clear the RX enable bit */
+ amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON);
+}
+
+static void amazonasc_enable_ms(struct uart_port *port)
+{
+ /* no modem signals */
+ return;
+}
+
+#include <linux/version.h>
+
+static void
+amazonasc_rx_chars(struct uart_port *port)
+{
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
+ struct tty_struct *tty = port->state->port.tty;
+#else
+ struct tty_struct *tty = port->info->port.tty;
+#endif
+ unsigned int ch = 0, rsr = 0, fifocnt;
+
+ fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+ while (fifocnt--)
+ {
+ u8 flag = TTY_NORMAL;
+ ch = amazon_readl(AMAZON_ASC_RBUF);
+ rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX;
+ tty_flip_buffer_push(tty);
+ port->icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (rsr & ASCCON_ANY) {
+ if (rsr & ASCCON_PE) {
+ port->icount.parity++;
+ amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE);
+ } else if (rsr & ASCCON_FE) {
+ port->icount.frame++;
+ amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE);
+ }
+ if (rsr & ASCCON_OE) {
+ port->icount.overrun++;
+ amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE);
+ }
+
+ rsr &= port->read_status_mask;
+
+ if (rsr & ASCCON_PE)
+ flag = TTY_PARITY;
+ else if (rsr & ASCCON_FE)
+ flag = TTY_FRAME;
+ }
+
+ if ((rsr & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (rsr & ASCCON_OE)
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ if (ch != 0)
+ tty_flip_buffer_push(tty);
+
+ return;
+}
+
+
+static void amazonasc_tx_chars(struct uart_port *port)
+{
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
+ struct circ_buf *xmit = &port->state->xmit;
+#else
+ struct circ_buf *xmit = &port->info->xmit;
+#endif
+
+ if (uart_tx_stopped(port)) {
+ amazonasc_stop_tx(port);
+ return;
+ }
+
+ while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
+ >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL)
+ {
+ if (port->x_char) {
+ amazon_writel(port->x_char, AMAZON_ASC_TBUF);
+ port->icount.tx++;
+ port->x_char = 0;
+ continue;
+ }
+
+ if (uart_circ_empty(xmit))
+ break;
+
+ amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static irqreturn_t amazonasc_tx_int(int irq, void *port)
+{
+ amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1);
+ amazonasc_start_tx(port);
+
+ /* clear any pending interrupts */
+ amazon_writel_masked(AMAZON_ASC_WHBCON,
+ (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
+ (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t amazonasc_er_int(int irq, void *port)
+{
+ /* clear any pending interrupts */
+ amazon_writel_masked(AMAZON_ASC_WHBCON,
+ (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
+ (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t amazonasc_rx_int(int irq, void *port)
+{
+ amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1);
+ amazonasc_rx_chars((struct uart_port *) port);
+ return IRQ_HANDLED;
+}
+
+static u_int amazonasc_tx_empty(struct uart_port *port)
+{
+ int status;
+
+ /*
+ * FSTAT tells exactly how many bytes are in the FIFO.
+ * The question is whether we really need to wait for all
+ * 16 bytes to be transmitted before reporting that the
+ * transmitter is empty.
+ */
+ status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+ return status ? 0 : TIOCSER_TEMT;
+}
+
+static u_int amazonasc_get_mctrl(struct uart_port *port)
+{
+ /* no modem control signals - the readme says to pretend all are set */
+ return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR;
+}
+
+static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ /* no modem control - just return */
+ return;
+}
+
+static void amazonasc_break_ctl(struct uart_port *port, int break_state)
+{
+ /* no way to send a break */
+ return;
+}
+
+static int amazonasc_startup(struct uart_port *port)
+{
+ unsigned int con = 0;
+ unsigned long flags;
+ int retval;
+
+ /* this assumes: CON.BRS = CON.FDE = 0 */
+ if (uartclk == 0)
+ uartclk = amazon_get_fpi_hz();
+
+ amazonasc_ports[0].uartclk = uartclk;
+
+ local_irq_save(flags);
+
+ /* this setup was probably already done in u-boot */
+ /* ASC and GPIO Port 1 bits 3 and 4 share the same pins
+ * P1.3 (RX) in, Alternate 10
+ * P1.4 (TX) in, Alternate 10
+ */
+ amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); //P1.4 output, P1.3 input
+ amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); //ALTSETL0 11
+ amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0); //ALTSETL1 00
+ amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10);
+
+ /* set up the CLC */
+ amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0);
+ amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET);
+
+ /* asynchronous mode */
+ con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN;
+
+ /* choose the line - there's only one */
+ amazon_writel(0, AMAZON_ASC_PISEL);
+ amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
+ AMAZON_ASC_TXFCON);
+ amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
+ AMAZON_ASC_RXFCON);
+ wmb();
+
+ amazon_writel_masked(AMAZON_ASC_CON, con, con);
+
+ retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port);
+ if (retval){
+ printk("failed to request amazonasc_rx_int\n");
+ return retval;
+ }
+ retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port);
+ if (retval){
+ printk("failed to request amazonasc_tx_int\n");
+ goto err1;
+ }
+
+ retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port);
+ if (retval){
+ printk("failed to request amazonasc_er_int\n");
+ goto err2;
+ }
+
+ local_irq_restore(flags);
+ return 0;
+
+err2:
+ free_irq(AMAZONASC_TIR, port);
+
+err1:
+ free_irq(AMAZONASC_RIR, port);
+ local_irq_restore(flags);
+ return retval;
+}
+
+static void amazonasc_shutdown(struct uart_port *port)
+{
+ free_irq(AMAZONASC_RIR, port);
+ free_irq(AMAZONASC_TIR, port);
+ free_irq(AMAZONASC_EIR, port);
+ /*
+ * disable the baudrate generator to disable the ASC
+ */
+ amazon_writel(0, AMAZON_ASC_CON);
+
+ /* flush and then disable the fifos */
+ amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU);
+ amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0);
+ amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU);
+ amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0);
+}
+
+static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
+{
+ unsigned int cflag;
+ unsigned int iflag;
+ unsigned int baud, quot;
+ unsigned int con = 0;
+ unsigned long flags;
+
+ cflag = new->c_cflag;
+ iflag = new->c_iflag;
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ /* 7 bits are always with parity */
+ case CS7: con = ASCCON_M_7ASYNCPAR; break;
+ /* the ASC only suports 7 and 8 bits */
+ case CS5:
+ case CS6:
+ default:
+ if (cflag & PARENB)
+ con = ASCCON_M_8ASYNCPAR;
+ else
+ con = ASCCON_M_8ASYNC;
+ break;
+ }
+ if (cflag & CSTOPB)
+ con |= ASCCON_STP;
+ if (cflag & PARENB) {
+ if (!(cflag & PARODD))
+ con &= ~ASCCON_ODD;
+ else
+ con |= ASCCON_ODD;
+ }
+
+ port->read_status_mask = ASCCON_OE;
+ if (iflag & INPCK)
+ port->read_status_mask |= ASCCON_FE | ASCCON_PE;
+
+ port->ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ port->ignore_status_mask |= ASCCON_FE | ASCCON_PE;
+
+ if (iflag & IGNBRK) {
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (iflag & IGNPAR)
+ port->ignore_status_mask |= ASCCON_OE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_UER_RX;
+
+ /* set error signals - framing, parity and overrun */
+ con |= ASCCON_FEN;
+ con |= ASCCON_OEN;
+ con |= ASCCON_PEN;
+ /* enable the receiver */
+ con |= ASCCON_REN;
+
+ /* block the IRQs */
+ local_irq_save(flags);
+
+ /* set up CON */
+ amazon_writel(con, AMAZON_ASC_CON);
+
+ /* Set baud rate - take a divider of 2 into account */
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+ quot = quot/2 - 1;
+
+ /* the next 3 probably already happened when we set CON above */
+ /* disable the baudrate generator */
+ amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0);
+ /* make sure the fractional divider is off */
+ amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0);
+ /* set up to use divisor of 2 */
+ amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0);
+ /* now we can write the new baudrate into the register */
+ amazon_writel(quot, AMAZON_ASC_BTR);
+ /* turn the baudrate generator back on */
+ amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R);
+
+ local_irq_restore(flags);
+}
+
+static const char *amazonasc_type(struct uart_port *port)
+{
+ return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void amazonasc_release_port(struct uart_port *port)
+{
+ return;
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int amazonasc_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void amazonasc_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_AMAZONASC;
+ amazonasc_request_port(port);
+ }
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops amazonasc_pops = {
+ .tx_empty = amazonasc_tx_empty,
+ .set_mctrl = amazonasc_set_mctrl,
+ .get_mctrl = amazonasc_get_mctrl,
+ .stop_tx = amazonasc_stop_tx,
+ .start_tx = amazonasc_start_tx,
+ .stop_rx = amazonasc_stop_rx,
+ .enable_ms = amazonasc_enable_ms,
+ .break_ctl = amazonasc_break_ctl,
+ .startup = amazonasc_startup,
+ .shutdown = amazonasc_shutdown,
+ .set_termios = amazonasc_set_termios,
+ .type = amazonasc_type,
+ .release_port = amazonasc_release_port,
+ .request_port = amazonasc_request_port,
+ .config_port = amazonasc_config_port,
+ .verify_port = amazonasc_verify_port,
+};
+
+static struct uart_port amazonasc_ports[UART_NR] = {
+ {
+ membase: (void *)AMAZON_ASC,
+ mapbase: AMAZON_ASC,
+ iotype: SERIAL_IO_MEM,
+ irq: AMAZONASC_RIR, /* RIR */
+ uartclk: 0, /* filled in dynamically */
+ fifosize: 16,
+ unused: { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */
+ type: PORT_AMAZONASC,
+ ops: &amazonasc_pops,
+ flags: ASYNC_BOOT_AUTOCONF,
+ },
+};
+
+static void amazonasc_console_write(struct console *co, const char *s, u_int count)
+{
+ int i, fifocnt;
+ unsigned long flags;
+ local_irq_save(flags);
+ for (i = 0; i < count;)
+ {
+ /* wait until the FIFO is not full */
+ do
+ {
+ fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
+ >> ASCFSTAT_TXFFLOFF;
+ } while (fifocnt == AMAZONASC_TXFIFO_FULL);
+ if (s[i] == '\0')
+ {
+ break;
+ }
+ if (s[i] == '\n')
+ {
+ amazon_writel('\r', AMAZON_ASC_TBUF);
+ do
+ {
+ fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) &
+ ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF;
+ } while (fifocnt == AMAZONASC_TXFIFO_FULL);
+ }
+ amazon_writel(s[i], AMAZON_ASC_TBUF);
+ i++;
+ }
+
+ local_irq_restore(flags);
+}
+
+static void __init
+amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+{
+ u_int lcr_h;
+
+ lcr_h = amazon_readl(AMAZON_ASC_CON);
+ /* do this only if the ASC is turned on */
+ if (lcr_h & ASCCON_R) {
+ u_int quot, div, fdiv, frac;
+
+ *parity = 'n';
+ if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR ||
+ (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) {
+ if (lcr_h & ASCCON_ODD)
+ *parity = 'o';
+ else
+ *parity = 'e';
+ }
+
+ if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR)
+ *bits = 7;
+ else
+ *bits = 8;
+
+ quot = amazon_readl(AMAZON_ASC_BTR) + 1;
+
+ /* this gets hairy if the fractional divider is used */
+ if (lcr_h & ASCCON_FDE)
+ {
+ div = 1;
+ fdiv = amazon_readl(AMAZON_ASC_FDV);
+ if (fdiv == 0)
+ fdiv = 512;
+ frac = 512;
+ }
+ else
+ {
+ div = lcr_h & ASCCON_BRS ? 3 : 2;
+ fdiv = frac = 1;
+ }
+ /*
+ * This doesn't work exactly because we use integer
+ * math to calculate baud which results in rounding
+ * errors when we try to go from quot -> baud !!
+ * Try to make this work for both the fractional divider
+ * and the simple divider. Also try to avoid rounding
+ * errors using integer math.
+ */
+
+ *baud = frac * (port->uartclk / (div * 512 * 16 * quot));
+ if (*baud > 1100 && *baud < 2400)
+ *baud = 1200;
+ if (*baud > 2300 && *baud < 4800)
+ *baud = 2400;
+ if (*baud > 4700 && *baud < 9600)
+ *baud = 4800;
+ if (*baud > 9500 && *baud < 19200)
+ *baud = 9600;
+ if (*baud > 19000 && *baud < 38400)
+ *baud = 19200;
+ if (*baud > 38400 && *baud < 57600)
+ *baud = 38400;
+ if (*baud > 57600 && *baud < 115200)
+ *baud = 57600;
+ if (*baud > 115200 && *baud < 230400)
+ *baud = 115200;
+ }
+}
+
+static int __init amazonasc_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /* this assumes: CON.BRS = CON.FDE = 0 */
+ if (uartclk == 0)
+ uartclk = amazon_get_fpi_hz();
+ co->index = 0;
+ port = &amazonasc_ports[0];
+ amazonasc_ports[0].uartclk = uartclk;
+ amazonasc_ports[0].type = PORT_AMAZONASC;
+
+ if (options){
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ }
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver amazonasc_reg;
+static struct console amazonasc_console = {
+ name: "ttyS",
+ write: amazonasc_console_write,
+ device: uart_console_device,
+ setup: amazonasc_console_setup,
+ flags: CON_PRINTBUFFER,
+ index: -1,
+ data: &amazonasc_reg,
+};
+
+static struct uart_driver amazonasc_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+ .cons = &amazonasc_console,
+};
+
+static int __init amazon_asc_probe(struct platform_device *dev)
+{
+ unsigned char res;
+ uart_register_driver(&amazonasc_reg);
+ res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]);
+ return res;
+}
+
+static int amazon_asc_remove(struct platform_device *dev)
+{
+ uart_unregister_driver(&amazonasc_reg);
+ return 0;
+}
+
+static struct platform_driver amazon_asc_driver = {
+ .probe = amazon_asc_probe,
+ .remove = amazon_asc_remove,
+ .driver = {
+ .name = "amazon_asc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amazon_asc_init(void)
+{
+ int ret = platform_driver_register(&amazon_asc_driver);
+ if (ret)
+ printk(KERN_WARNING "amazon_asc: error registering platfom driver!\n");
+ return ret;
+}
+
+static void __exit amazon_asc_cleanup(void)
+{
+ platform_driver_unregister(&amazon_asc_driver);
+}
+
+module_init(amazon_asc_init);
+module_exit(amazon_asc_cleanup);
+
+MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin");
+MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver");
+MODULE_LICENSE("GPL");
+
release: wdt_release,
};
-static int __init amazon_wdt_probe(struct platform_device *dev)
+static int amazon_wdt_probe(struct platform_device *dev)
{
int result = result = register_chrdev(0, "watchdog", &wdt_fops);
+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1578,7 +1578,16 @@ void __cpuinit per_cpu_trap_init(void)
- if (cpu_has_mips_r2) {
- cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+ if (!cp0_compare_irq)
-+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
- cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
-+ if (!cp0_perfcount_irq)
-+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+ if (arch_fixup_c0_irqs)
-+ arch_fixup_c0_irqs();
-+
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
- } else {
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -138,9 +138,11 @@ extern void free_irqno(unsigned int irq)
- * IE7. Since R2 their number has to be read from the c0_intctl register.
- */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
-
- extern int cp0_compare_irq;
- extern int cp0_compare_irq_shift;
- extern int cp0_perfcount_irq;
-+extern void __weak arch_fixup_c0_irqs(void);
-
- #endif /* _ASM_IRQ_H */
+++ /dev/null
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -23,6 +23,22 @@
-
- #ifndef CONFIG_MIPS_MT_SMTC
-
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register. 4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+ do { \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ } while (0)
-+
- static int mips_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -32,6 +48,7 @@ static int mips_next_event(unsigned long
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-+ compare_change_hazard();
- res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
- return res;
- }
+++ /dev/null
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -119,6 +119,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
-+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
-
- # PARISC Architecture
-
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -102,6 +102,22 @@ config BCM63XX
- help
- Support for BCM63XX based boards
-
-+config AMAZON
-+ bool "Amazon support (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_HAS_EARLY_PRINTK
-+ select HW_HAS_PCI
-+ select SWAP_IO_SPACE
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select CEVT_R4K
-@@ -716,6 +732,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
-
- endchoice
-
-+source "arch/mips/amazon/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -5,6 +5,7 @@ platforms += ar7
- platforms += bcm47xx
- platforms += bcm63xx
- platforms += cavium-octeon
-+platforms += amazon
- platforms += cobalt
- platforms += dec
- platforms += emma
---- /dev/null
-+++ b/arch/mips/amazon/Platform
-@@ -0,0 +1,7 @@
-+#
-+# Infineon AMAZON boards
-+#
-+platform-$(CONFIG_AMAZON) += amazon/
-+cflags-$(CONFIG_AMAZON) += \
-+ -I$(srctree)/arch/mips/include/asm/mach-amazon
-+load-$(CONFIG_AMAZON) := 0xffffffff80002000
+++ /dev/null
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -59,3 +59,4 @@ obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-f
- obj-$(CONFIG_MTD_VMU) += vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
- obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o
-+obj-$(CONFIG_AMAZON_MTD) += amazon.o
+++ /dev/null
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -302,3 +302,6 @@ obj-$(CONFIG_CAIF) += caif/
- obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
- obj-$(CONFIG_PCH_GBE) += pch_gbe/
- obj-$(CONFIG_TILE_NET) += tile/
-+
-+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
-+obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o
+++ /dev/null
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -3,6 +3,7 @@
- #
-
- obj-$(CONFIG_SERIAL_CORE) += serial_core.o
-+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
- obj-$(CONFIG_SERIAL_21285) += 21285.o
-
- # These Sparc drivers have to appear before others such as 8250
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1166,6 +1166,9 @@ static int __xipram do_write_oneword(str
- int retry_cnt = 0;
-
- adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+ adr ^= 2;
-+#endif
-
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr, FL_WRITING);
-@@ -1433,7 +1436,11 @@ static int __xipram do_write_buffer(stru
- z = 0;
- while(z < words * map_bankwidth(map)) {
- datum = map_word_load(map, buf);
-+#ifdef CONFIG_AMAZON
-+ map_write(map, datum, (adr + z) ^ 0x2);
-+#else
- map_write(map, datum, adr + z);
-+#endif
-
- z += map_bankwidth(map);
- buf += map_bankwidth(map);
-@@ -1678,6 +1685,9 @@ static int __xipram do_erase_oneblock(st
- int ret = 0;
-
- adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+ adr ^= 2;
-+#endif
-
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr, FL_ERASING);
-@@ -1806,6 +1816,10 @@ static int do_atmel_lock(struct map_info
- struct cfi_private *cfi = map->fldrv_priv;
- int ret;
-
-+#ifdef CONFIG_AMAZON
-+ adr ^= 2;
-+#endif
-+
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
- if (ret)
-@@ -1842,6 +1856,10 @@ static int do_atmel_unlock(struct map_in
- struct cfi_private *cfi = map->fldrv_priv;
- int ret;
-
-+#ifdef CONFIG_AMAZON
-+ adr ^= 2;
-+#endif
-+
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING);
- if (ret)
--- /dev/null
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -1593,7 +1593,16 @@ void __cpuinit per_cpu_trap_init(void)
+ if (cpu_has_mips_r2) {
+ cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+ cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
++ if (!cp0_compare_irq)
++ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
++
+ cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
++ if (!cp0_perfcount_irq)
++ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
++
++ if (arch_fixup_c0_irqs)
++ arch_fixup_c0_irqs();
++
+ if (cp0_perfcount_irq == cp0_compare_irq)
+ cp0_perfcount_irq = -1;
+ } else {
+--- a/arch/mips/include/asm/irq.h
++++ b/arch/mips/include/asm/irq.h
+@@ -139,9 +139,11 @@ extern void free_irqno(unsigned int irq)
+ * IE7. Since R2 their number has to be read from the c0_intctl register.
+ */
+ #define CP0_LEGACY_COMPARE_IRQ 7
++#define CP0_LEGACY_PERFCNT_IRQ 7
+
+ extern int cp0_compare_irq;
+ extern int cp0_compare_irq_shift;
+ extern int cp0_perfcount_irq;
++extern void __weak arch_fixup_c0_irqs(void);
+
+ #endif /* _ASM_IRQ_H */
--- /dev/null
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -23,6 +23,22 @@
+
+ #ifndef CONFIG_MIPS_MT_SMTC
+
++/*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register. 4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++ do { \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ } while (0)
++
+ static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+@@ -32,6 +48,7 @@ static int mips_next_event(unsigned long
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
++ compare_change_hazard();
+ res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
+ return res;
+ }
--- /dev/null
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
++obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
+
+ # PARISC Architecture
+
--- /dev/null
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -120,6 +120,22 @@ config BCM63XX
+ help
+ Support for BCM63XX based boards
+
++config AMAZON
++ bool "Amazon support (EXPERIMENTAL)"
++ depends on EXPERIMENTAL
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select CEVT_R4K
++ select CSRC_R4K
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_CPU_MIPS32_R2
++ select HAVE_STD_PC_SERIAL_PORT
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_HAS_EARLY_PRINTK
++ select HW_HAS_PCI
++ select SWAP_IO_SPACE
++
+ config MIPS_COBALT
+ bool "Cobalt Server"
+ select CEVT_R4K
+@@ -813,6 +829,7 @@ config NLM_XLP_BOARD
+
+ endchoice
+
++source "arch/mips/amazon/Kconfig"
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/ath79/Kconfig"
+ source "arch/mips/bcm47xx/Kconfig"
+--- a/arch/mips/Kbuild.platforms
++++ b/arch/mips/Kbuild.platforms
+@@ -6,6 +6,7 @@ platforms += ath79
+ platforms += bcm47xx
+ platforms += bcm63xx
+ platforms += cavium-octeon
++platforms += amazon
+ platforms += cobalt
+ platforms += dec
+ platforms += emma
+--- /dev/null
++++ b/arch/mips/amazon/Platform
+@@ -0,0 +1,7 @@
++#
++# Infineon AMAZON boards
++#
++platform-$(CONFIG_AMAZON) += amazon/
++cflags-$(CONFIG_AMAZON) += \
++ -I$(srctree)/arch/mips/include/asm/mach-amazon
++load-$(CONFIG_AMAZON) := 0xffffffff80002000
--- /dev/null
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -57,3 +57,4 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
+ obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
+ obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
+ obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
++obj-$(CONFIG_AMAZON_MTD) += amazon.o
--- /dev/null
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -74,3 +74,6 @@ obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundr
+ obj-$(CONFIG_NET_VENDOR_VIA) += via/
+ obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
+ obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
++
++obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
++obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o
--- /dev/null
+--- a/drivers/tty/serial/Makefile
++++ b/drivers/tty/serial/Makefile
+@@ -78,3 +78,4 @@ obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
+ obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
+ obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
+ obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
++obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
--- /dev/null
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1152,6 +1152,9 @@ static int __xipram do_write_oneword(str
+ int retry_cnt = 0;
+
+ adr += chip->start;
++#ifdef CONFIG_AMAZON
++ adr ^= 2;
++#endif
+
+ mutex_lock(&chip->mutex);
+ ret = get_chip(map, chip, adr, FL_WRITING);
+@@ -1420,7 +1423,11 @@ static int __xipram do_write_buffer(stru
+ z = 0;
+ while(z < words * map_bankwidth(map)) {
+ datum = map_word_load(map, buf);
++#ifdef CONFIG_AMAZON
++ map_write(map, datum, (adr + z) ^ 0x2);
++#else
+ map_write(map, datum, adr + z);
++#endif
+
+ z += map_bankwidth(map);
+ buf += map_bankwidth(map);
+@@ -1665,6 +1672,9 @@ static int __xipram do_erase_oneblock(st
+ int ret = 0;
+
+ adr += chip->start;
++#ifdef CONFIG_AMAZON
++ adr ^= 2;
++#endif
+
+ mutex_lock(&chip->mutex);
+ ret = get_chip(map, chip, adr, FL_ERASING);
+@@ -1793,6 +1803,10 @@ static int do_atmel_lock(struct map_info
+ struct cfi_private *cfi = map->fldrv_priv;
+ int ret;
+
++#ifdef CONFIG_AMAZON
++ adr ^= 2;
++#endif
++
+ mutex_lock(&chip->mutex);
+ ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
+ if (ret)
+@@ -1828,6 +1842,10 @@ static int do_atmel_unlock(struct map_in
+ struct cfi_private *cfi = map->fldrv_priv;
+ int ret;
+
++#ifdef CONFIG_AMAZON
++ adr ^= 2;
++#endif
++
+ mutex_lock(&chip->mutex);
+ ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING);
+ if (ret)
projects / openwrt / svn-archive / archive.git / commitdiff