brcm63xx: add Comtrend VR-3026e support
authorJonas Gorski <jogo@openwrt.org>
Sun, 30 Aug 2015 12:17:46 +0000 (12:17 +0000)
committerJonas Gorski <jogo@openwrt.org>
Sun, 30 Aug 2015 12:17:46 +0000 (12:17 +0000)
Add support for Comtrend VR-3026e v1.
The device is almost identical to the Comtrend VR-3025un.

Signed-off-by: Martin Tesar <tesarmar@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46752

target/linux/brcm63xx/base-files/etc/diag.sh
target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
target/linux/brcm63xx/base-files/lib/brcm63xx.sh
target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx
target/linux/brcm63xx/dts/vr-3026e.dts [new file with mode: 0644]
target/linux/brcm63xx/image/Makefile
target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch [new file with mode: 0644]
target/linux/brcm63xx/profiles/comtrend.mk

index 7916ac26e27b5c3d11d52285cb14060c8cf730a7..7826fada10240b1ed0f140bd0fe2eb30cda0bd98 100644 (file)
@@ -39,6 +39,9 @@ set_state() {
        vr-3025u)
                status_led="VR-3025u:green:power"
                ;;
+       vr-3026e)
+               status_led="VR-3026e:green:power"
+               ;;
        wap-5813n)
                status_led="WAP-5813n:green:power"
                ;;
index 11dd5b8d7b64ce6e5a1c9469d4299a5b37f91b16..129514b9b69444310ca831825cbb48e0d70583ff 100644 (file)
@@ -95,7 +95,8 @@ fast2704v2 |\
 hg655b |\
 p870hw-51a_v2 |\
 vr-3025un |\
-vr-3025u)
+vr-3025u |\
+vr-3026e)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "eth0" "1" "1"
        ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t"
index 4a167dc29730c185d0cae1e87c58f37130bccb9d..f307a4cabe5dd0031191f7ab0fa1d67f5e66d94d 100644 (file)
@@ -30,6 +30,7 @@ case "$(brcm63xx_board_name)" in
        v2500v_bb |\
        vr-3025u |\
        vr-3025un |\
+       vr-3026e |\
        wap-5813n)
                do_fixcrc
                ;;
index 92fa5f2bdb7d949bed5ca65afee09d66cd63b4c7..1a97c86d6fca9407f1110b2c66c81c4dcb4b45c0 100755 (executable)
@@ -102,6 +102,9 @@ brcm63xx_dt_detect() {
        "Comtrend VR-3025un")
                board_name="vr-3025un"
                ;;
+       "Comtrend VR-3026e")
+               board_name="vr-3026e"
+               ;;
        "Comtrend WAP-5813n")
                board_name="wap-5813n"
                ;;
index d6ec53752aa084931c0bf6e87701a12e1a8fcd16..abf5b89c573339a643799470a9f42b3cfef60fc5 100644 (file)
@@ -32,6 +32,7 @@ set_preinit_iface() {
        v2110 |\
        vr-3025un |\
        vr-3025u |\
+       vr-3026e |\
        wap-5813n)
                ifname=eth0
                ;;
diff --git a/target/linux/brcm63xx/dts/vr-3026e.dts b/target/linux/brcm63xx/dts/vr-3026e.dts
new file mode 100644 (file)
index 0000000..49790e2
--- /dev/null
@@ -0,0 +1,88 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend VR-3026e";
+       compatible = "comtrend,vr-3026e", "brcm,bcm6368";
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               debounce-interval = <60>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 2 1>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "VR-3026e:green:dsl";
+                       gpios = <&gpio0 2 1>;
+               };
+               inet_green {
+                       label = "VR-3026e:green:inet";
+                       gpios = <&gpio0 5 0>;
+               };
+               lan1_green {
+                       label = "VR-3026e:green:lan1";
+                       gpios = <&gpio0 6 1>;
+               };
+               lan2_green {
+                       label = "VR-3026e:green:lan2";
+                       gpios = <&gpio0 7 1>;
+               };
+               lan3_green {
+                       label = "VR-3026e:green:lan3";
+                       gpios = <&gpio0 8 1>;
+               };
+               lan4_green {
+                       label = "VR-3026e:green:lan4";
+                       gpios = <&gpio0 9 1>;
+               };
+               power_green {
+                       label = "VR-3026e:green:power";
+                       gpios = <&gpio0 22 0>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "VR-3026e:red:power";
+                       gpios = <&gpio0 24 0>;
+               };
+               inet_red {
+                       label = "VR-3026e:red:inet";
+                       gpios = <&gpio0 31 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       linux,part-probe = "bcm63xxpart";
+
+       cfe@0 {
+               label = "CFE";
+               reg = <0x000000 0x010000>;
+               read-only;
+       };
+
+       linux@10000 {
+               label = "linux";
+               reg = <0x010000 0x7e0000>;
+       };
+
+       nvram@7f0000 {
+               label = "nvram";
+               reg = <0x7f0000 0x010000>;
+       };
+};
index 90b9fa68eb4ba1b5903132e50df3e583b18bec04..9d3ec9fd00d7da8d1d1c7ba682e5b3bd70543525 100755 (executable)
@@ -535,6 +535,8 @@ $(eval $(call bcm63xxCfe,CT6373,CT-6373,ct-6373,CT6373-1,6358))
 $(eval $(call bcm63xxCfe,VR3025u,VR-3025u,vr-3025u,96368M-1541N,6368,--pad 16 --image-offset 0x20000 --block-size 0x20000))
 # Comtrend VR-3025un
 $(eval $(call bcm63xxCfe,VR3025un,VR-3025un,vr-3025un,96368M-1341N,6368,--pad 4))
+# Comtrend VR-3026e
+$(eval $(call bcm63xxCfe,VR3026e,VR-3026e,vr-3026e,96368MT-1341N1,6368,--pad 4))
 # Comtrend WAP-5813n
 $(eval $(call bcm63xxCfe,WAP5813n,WAP-5813n,wap-5813n,96369R-1231N,6368,--pad 4))
 # D-Link DSL-2640B, rev B2
diff --git a/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
new file mode 100644 (file)
index 0000000..260602a
--- /dev/null
@@ -0,0 +1,79 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2168,6 +2168,60 @@ static struct board_info __initdata boar
+       },
+ };
+
++static struct sprom_fixup __initdata vr3026e_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3026e = {
++      .name                                   = "96368MT-1341N1",
++      .expected_cpu_id                = 0x6368,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3026e_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3026e_fixups),
++      },
++};
++
+ static struct b53_platform_data WAP5813n_b53_pdata = {
+       .alias = "eth0",
+ };
+@@ -2472,6 +2526,7 @@ static const struct board_info __initcon
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
++      &board_VR3026e,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
++      { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+       { .compatible = "huawei,hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch
new file mode 100644 (file)
index 0000000..260602a
--- /dev/null
@@ -0,0 +1,79 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2168,6 +2168,60 @@ static struct board_info __initdata boar
+       },
+ };
+
++static struct sprom_fixup __initdata vr3026e_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3026e = {
++      .name                                   = "96368MT-1341N1",
++      .expected_cpu_id                = 0x6368,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3026e_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3026e_fixups),
++      },
++};
++
+ static struct b53_platform_data WAP5813n_b53_pdata = {
+       .alias = "eth0",
+ };
+@@ -2472,6 +2526,7 @@ static const struct board_info __initcon
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
++      &board_VR3026e,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
++      { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+       { .compatible = "huawei,hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
index 8c1b8628a6e3d3a5ca7be09064dfe4a8b987b44b..99fec4a6b82a0ae19bb7e88cdcf09d0b3f4cfd63 100644 (file)
@@ -73,6 +73,15 @@ define Profile/VR3025un/Description
 endef
 $(eval $(call Profile,VR3025un))
 
+define Profile/VR3026e
+  NAME:=Comtrend VR-3026e
+  PACKAGES:=kmod-b43 wpad-mini
+endef
+define Profile/VR3026e/Description
+  Package set optimized for VR-3026e.
+endef
+$(eval $(call Profile,VR3026e))
+
 define Profile/WAP5813n
   NAME:=Comtrend WAP-5813n
   PACKAGES:=kmod-b43 wpad-mini \