adm5120: drop 3.8 and 3.14 support
authorJohn Crispin <john@openwrt.org>
Mon, 16 Mar 2015 07:41:19 +0000 (07:41 +0000)
committerJohn Crispin <john@openwrt.org>
Mon, 16 Mar 2015 07:41:19 +0000 (07:41 +0000)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44823

228 files changed:
target/linux/adm5120/config-3.14 [deleted file]
target/linux/adm5120/config-3.8 [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/Kconfig [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/Platform [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cas-771.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cellvision.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cellvision.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/nfs-101.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/adm5120.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/clock.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/early-printk.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/gpio.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/irq.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/memory.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/platform.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/prom.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/common/setup.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/compex.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/compex.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/np27g.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/np28g.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/wp54.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-6104k.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-6104kp.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61x4wg.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61xx.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61xx.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/generic/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/generic/eb-214a.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120-rt.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120-wvoip.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120p-ata.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy83000.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-11x.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-133.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-133c.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-150.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-153.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-192.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-1xx.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-1xx.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/motorola/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/motorola/pmugw.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/osbridge/5gxi.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/osbridge/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/admboot.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/bootbase.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/cfe.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/generic.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/myloader.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/prom_read.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/routerboot.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/Makefile [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-334wt.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-335.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-33x.c [deleted file]
target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-33x.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_defs.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_info.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_intc.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_nand.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_platform.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_switch.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_uart.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/asm/sizes.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/gpio.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/irq.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/admboot.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/cfe.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/generic.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/myloader.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/routerboot.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/zynos.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/war.h [deleted file]
target/linux/adm5120/files-3.14/arch/mips/pci/pci-adm5120.c [deleted file]
target/linux/adm5120/files-3.14/drivers/ata/pata_rb153_cf.c [deleted file]
target/linux/adm5120/files-3.14/drivers/leds/ledtrig-adm5120-switch.c [deleted file]
target/linux/adm5120/files-3.14/drivers/mtd/maps/adm5120-flash.c [deleted file]
target/linux/adm5120/files-3.14/drivers/mtd/trxsplit.c [deleted file]
target/linux/adm5120/files-3.14/drivers/net/adm5120sw.c [deleted file]
target/linux/adm5120/files-3.14/drivers/net/adm5120sw.h [deleted file]
target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-dbg.c [deleted file]
target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-drv.c [deleted file]
target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-hcd.c [deleted file]
target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-hub.c [deleted file]
target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-mem.c [deleted file]
target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-pm.c [deleted file]
target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-q.c [deleted file]
target/linux/adm5120/files-3.14/drivers/usb/host/adm5120.h [deleted file]
target/linux/adm5120/files-3.14/drivers/watchdog/adm5120_wdt.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/Kconfig [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/Platform [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cas-771.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/nfs-101.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/adm5120.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/clock.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/early-printk.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/gpio.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/irq.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/memory.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/platform.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/prom.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/common/setup.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np27g.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np28g.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/wp54.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104k.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104kp.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61x4wg.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/eb-214a.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-rt.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-wvoip.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120p-ata.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy83000.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-11x.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133c.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-150.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-153.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-192.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/pmugw.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/5gxi.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/admboot.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/bootbase.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/cfe.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/generic.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/myloader.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/prom_read.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/routerboot.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/Makefile [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-334wt.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-335.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.c [deleted file]
target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_defs.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_info.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_nand.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_platform.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_switch.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_uart.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/asm/sizes.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/gpio.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/irq.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/admboot.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/cfe.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/generic.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/myloader.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/routerboot.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/zynos.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/war.h [deleted file]
target/linux/adm5120/files-3.8/arch/mips/pci/pci-adm5120.c [deleted file]
target/linux/adm5120/files-3.8/drivers/ata/pata_rb153_cf.c [deleted file]
target/linux/adm5120/files-3.8/drivers/leds/ledtrig-adm5120-switch.c [deleted file]
target/linux/adm5120/files-3.8/drivers/mtd/maps/adm5120-flash.c [deleted file]
target/linux/adm5120/files-3.8/drivers/mtd/trxsplit.c [deleted file]
target/linux/adm5120/files-3.8/drivers/net/adm5120sw.c [deleted file]
target/linux/adm5120/files-3.8/drivers/net/adm5120sw.h [deleted file]
target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-dbg.c [deleted file]
target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-drv.c [deleted file]
target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-hcd.c [deleted file]
target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-hub.c [deleted file]
target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-mem.c [deleted file]
target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-pm.c [deleted file]
target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-q.c [deleted file]
target/linux/adm5120/files-3.8/drivers/usb/host/adm5120.h [deleted file]
target/linux/adm5120/files-3.8/drivers/watchdog/adm5120_wdt.c [deleted file]
target/linux/adm5120/patches-3.14/001-adm5120.patch [deleted file]
target/linux/adm5120/patches-3.14/002-adm5120_flash.patch [deleted file]
target/linux/adm5120/patches-3.14/003-adm5120_switch.patch [deleted file]
target/linux/adm5120/patches-3.14/005-adm5120_usb.patch [deleted file]
target/linux/adm5120/patches-3.14/007-adm5120_pci.patch [deleted file]
target/linux/adm5120/patches-3.14/009-adm5120_leds_switch_trigger.patch [deleted file]
target/linux/adm5120/patches-3.14/050-revert_rootfs_splits.patch [deleted file]
target/linux/adm5120/patches-3.14/100-rootfs_split.patch [deleted file]
target/linux/adm5120/patches-3.14/101-cfi_fixup_macronix_bootloc.patch [deleted file]
target/linux/adm5120/patches-3.14/102-jedec_pmc_39lvxxx_chips.patch [deleted file]
target/linux/adm5120/patches-3.14/103-mtd_trxsplit.patch [deleted file]
target/linux/adm5120/patches-3.14/120-rb153_cf_driver.patch [deleted file]
target/linux/adm5120/patches-3.14/200-amba_pl010_hacks.patch [deleted file]
target/linux/adm5120/patches-3.14/203-gpio_leds_brightness.patch [deleted file]
target/linux/adm5120/patches-3.14/310-adm5120_wdt.patch [deleted file]
target/linux/adm5120/patches-3.8/001-adm5120.patch [deleted file]
target/linux/adm5120/patches-3.8/002-adm5120_flash.patch [deleted file]
target/linux/adm5120/patches-3.8/003-adm5120_switch.patch [deleted file]
target/linux/adm5120/patches-3.8/005-adm5120_usb.patch [deleted file]
target/linux/adm5120/patches-3.8/007-adm5120_pci.patch [deleted file]
target/linux/adm5120/patches-3.8/009-adm5120_leds_switch_trigger.patch [deleted file]
target/linux/adm5120/patches-3.8/101-cfi_fixup_macronix_bootloc.patch [deleted file]
target/linux/adm5120/patches-3.8/102-jedec_pmc_39lvxxx_chips.patch [deleted file]
target/linux/adm5120/patches-3.8/103-mtd_trxsplit.patch [deleted file]
target/linux/adm5120/patches-3.8/120-rb153_cf_driver.patch [deleted file]
target/linux/adm5120/patches-3.8/200-amba_pl010_hacks.patch [deleted file]
target/linux/adm5120/patches-3.8/203-gpio_leds_brightness.patch [deleted file]
target/linux/adm5120/patches-3.8/310-adm5120_wdt.patch [deleted file]

diff --git a/target/linux/adm5120/config-3.14 b/target/linux/adm5120/config-3.14
deleted file mode 100644 (file)
index b6157d8..0000000
+++ /dev/null
@@ -1,189 +0,0 @@
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-# CONFIG_ADM5120_MACH_RB_11X is not set
-# CONFIG_ADM5120_MACH_RB_133 is not set
-# CONFIG_ADM5120_MACH_RB_133C is not set
-# CONFIG_ADM5120_MACH_RB_150 is not set
-# CONFIG_ADM5120_MACH_RB_153 is not set
-# CONFIG_ADM5120_MACH_RB_192 is not set
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-# CONFIG_ADM5120_OEM_MIKROTIK is not set
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ATA=m
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HID=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=m
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_LEDS_TRIGGER_ADM5120_SWITCH is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_MII=m
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=m
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NO_HZ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_MOD=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_COMMON=m
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/config-3.8 b/target/linux/adm5120/config-3.8
deleted file mode 100644 (file)
index a689fc7..0000000
+++ /dev/null
@@ -1,170 +0,0 @@
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-# CONFIG_ADM5120_MACH_RB_11X is not set
-# CONFIG_ADM5120_MACH_RB_133 is not set
-# CONFIG_ADM5120_MACH_RB_133C is not set
-# CONFIG_ADM5120_MACH_RB_150 is not set
-# CONFIG_ADM5120_MACH_RB_153 is not set
-# CONFIG_ADM5120_MACH_RB_192 is not set
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-# CONFIG_ADM5120_OEM_MIKROTIK is not set
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_LEDS_TRIGGER_ADM5120_SWITCH is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NO_HZ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files-3.14/arch/mips/adm5120/Kconfig
deleted file mode 100644 (file)
index be35a8f..0000000
+++ /dev/null
@@ -1,197 +0,0 @@
-if ADM5120
-
-menu "ADM5120 Board selection"
-
-config ADM5120_MACH_CAS_771
-       bool "Cellvision CAS-771/771W support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_CELLVISION
-       default y
-
-config ADM5120_MACH_NFS_101
-       bool "Cellvision NFS-101U/101WU support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_CELLVISION
-       default y
-
-config ADM5120_MACH_NP27G
-       bool "Compex NP27G support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_COMPEX
-       default y
-
-config ADM5120_MACH_NP28G
-       bool "Compex NP28G support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_COMPEX
-       default y
-
-config ADM5120_MACH_WP54
-       bool "Compex WP54 family support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_COMPEX
-       default y
-
-config ADM5120_MACH_EB_214A
-       bool "EB-214A support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_GENERIC
-       default y
-
-config ADM5120_MACH_BR_6104K
-       bool "Edimax BR-6104K support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_EDIMAX
-       default y
-
-config ADM5120_MACH_BR_6104KP
-       bool "Edimax BR-6104KP support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_EDIMAX
-       default y
-
-config ADM5120_MACH_BR_61X4WG
-       bool "Edimax BR-6104WG/6114WG support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_EDIMAX
-       default y
-
-config ADM5120_MACH_EASY5120_RT
-       bool "Infineon EASY 5120-RT Reference Board support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_INFINEON
-       default y
-
-config ADM5120_MACH_EASY5120_WVOIP
-       bool "Infineon EASY 5120-WVoIP Reference Board support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_INFINEON
-       default y
-
-config ADM5120_MACH_EASY5120P_ATA
-       bool "Infineon EASY 5120P-ATA Reference Board support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_INFINEON
-       default y
-
-config ADM5120_MACH_EASY83000
-       bool "Infineon EASY 83000 Reference Board support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_INFINEON
-       default y
-
-config ADM5120_MACH_RB_11X
-       bool "MikroTik RouterBOARD 111/112 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_133
-       bool "MikroTik RouterBOARD 133 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_133C
-       bool "MikroTik RouterBOARD 133C support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_150
-       bool "MikroTik RouterBOARD 150 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_153
-       bool "MikroTik RouterBOARD 153 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_192
-       bool "MikroTik RouterBOARD 192 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_PMUGW
-       bool "Motorola Powerline MU Gateway"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MOTOROLA
-       default y
-
-config ADM5120_MACH_5GXI
-       bool "OSBRiDGE 5GXi/5XLi support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_OSBRIDGE
-       default y
-
-config ADM5120_MACH_P_334WT
-       bool "ZyXEL Prestige 334WT"
-       depends on CPU_BIG_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_ZYXEL
-       default y
-
-config ADM5120_MACH_P_335
-       bool "ZyXEL Prestige 335/335WT"
-       depends on CPU_BIG_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_ZYXEL
-       default y
-
-endmenu
-
-config ADM5120_SOC_BGA
-       select HW_HAS_PCI
-       def_bool n
-
-config ADM5120_OEM_CELLVISION
-       def_bool n
-
-config ADM5120_OEM_COMPEX
-       def_bool n
-
-config ADM5120_OEM_EDIMAX
-       def_bool n
-
-config ADM5120_OEM_GENERIC
-       def_bool n
-
-config ADM5120_OEM_INFINEON
-       def_bool n
-
-config ADM5120_OEM_MIKROTIK
-       def_bool n
-
-config ADM5120_OEM_MOTOROLA
-       def_bool n
-
-config ADM5120_OEM_OSBRIDGE
-       def_bool n
-
-config ADM5120_OEM_ZYXEL
-       def_bool n
-
-config ARM_AMBA
-       def_bool y
-
-endif
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/Platform b/target/linux/adm5120/files-3.14/arch/mips/adm5120/Platform
deleted file mode 100644 (file)
index 0c9edf2..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Infineon/ADMtek ADM5120
-#
-
-platform-$(CONFIG_ADM5120)                     += adm5120/common/
-
-platform-$(CONFIG_ADM5120_OEM_CELLVISION)      += adm5120/cellvision/
-platform-$(CONFIG_ADM5120_OEM_COMPEX)          += adm5120/compex/
-platform-$(CONFIG_ADM5120_OEM_EDIMAX)          += adm5120/edimax/
-platform-$(CONFIG_ADM5120_OEM_GENERIC)         += adm5120/generic/
-platform-$(CONFIG_ADM5120_OEM_INFINEON)                += adm5120/infineon/
-platform-$(CONFIG_ADM5120_OEM_MIKROTIK)                += adm5120/mikrotik/
-platform-$(CONFIG_ADM5120_OEM_MOTOROLA)                += adm5120/motorola/
-platform-$(CONFIG_ADM5120_OEM_OSBRIDGE)                += adm5120/osbridge/
-platform-$(CONFIG_ADM5120_OEM_ZYXEL)           += adm5120/zyxel/
-
-cflags-$(CONFIG_ADM5120)                       += -I$(srctree)/arch/mips/include/asm/mach-adm5120
-libs-$(CONFIG_ADM5120)                         += arch/mips/adm5120/prom/
-load-$(CONFIG_ADM5120)                         += 0xffffffff80001000
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/Makefile
deleted file mode 100644 (file)
index a949fc9..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-y  += cellvision.o
-
-obj-$(CONFIG_ADM5120_MACH_CAS_771)     += cas-771.o
-obj-$(CONFIG_ADM5120_MACH_NFS_101)     += nfs-101.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cas-771.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cas-771.c
deleted file mode 100644 (file)
index 5033e02..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  Cellvision/SparkLAN CAS-771/771W support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct gpio_led cas771_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash",    NULL),
-       /* GPIO PIN3 is the reset */
-       GPIO_LED_STD(ADM5120_GPIO_PIN6, "access",       NULL),
-       GPIO_LED_STD(ADM5120_GPIO_P0L1, "status",       NULL),
-       GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag",         NULL),
-};
-
-static void __init cas771_setup(void)
-{
-       cas7xx_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds),
-                                       cas771_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS771, "CAS-771", "Cellvision CAS-771/771W",
-            cas771_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cellvision.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cellvision.c
deleted file mode 100644 (file)
index a7cedf0..0000000
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  Cellvision/SparkLAN boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-#include <prom/admboot.h>
-
-#define CELLVISION_GPIO_FLASH_A20      ADM5120_GPIO_PIN5
-#define CELLVISION_GPIO_DEV_MASK       (1 << CELLVISION_GPIO_FLASH_A20)
-
-#define CELLVISION_CONFIG_OFFSET       0x8000
-#define CELLVISION_CONFIG_SIZE         0x1000
-
-static struct mtd_partition cas6xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "nvfs1",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "nvfs2",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct mtd_partition cas7xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "nvfs",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 128*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(CELLVISION_GPIO_FLASH_A20, 0);
-               break;
-       case 1:
-               gpio_set_value(CELLVISION_GPIO_FLASH_A20, 1);
-               break;
-       }
-}
-
-static void __init cellvision_flash_setup(void)
-{
-       /* setup flash A20 line */
-       gpio_request(CELLVISION_GPIO_FLASH_A20, NULL);
-       gpio_direction_output(CELLVISION_GPIO_FLASH_A20, 0);
-
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_add_device_flash(0);
-}
-
-void __init cellvision_mac_setup(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(CELLVISION_CONFIG_OFFSET,
-                                  CELLVISION_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-void __init cas6xx_flash_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
-       adm5120_flash0_data.parts = cas6xx_partitions;
-
-       cellvision_flash_setup();
-}
-
-void __init cas7xx_flash_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
-       adm5120_flash0_data.parts = cas7xx_partitions;
-
-       cellvision_flash_setup();
-}
-
-void __init cas6xx_setup(void)
-{
-       cas6xx_flash_setup();
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-       adm5120_add_device_switch(1, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS630, "CAS-630", "Cellvision CAS-630/630W",
-            cas6xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS670, "CAS-670", "Cellvision CAS-670/670W",
-            cas6xx_setup);
-
-void __init cas7xx_setup(void)
-{
-       cas7xx_flash_setup();
-       cellvision_mac_setup();
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-       adm5120_add_device_switch(1, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS700, "CAS-700", "Cellvision CAS-700/700W",
-            cas7xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS790, "CAS-790", "Cellvision CAS-790",
-            cas7xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS861, "CAS-861", "Cellvision CAS-861/861W",
-            cas7xx_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cellvision.h b/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/cellvision.h
deleted file mode 100644 (file)
index 2b55ebf..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  Cellvision/SparkLAN boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void cellvision_mac_setup(void) __init;
-
-extern void cas6xx_flash_setup(void) __init;
-extern void cas7xx_flash_setup(void) __init;
-extern void cas6xx_setup(void) __init;
-extern void cas7xx_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/nfs-101.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/cellvision/nfs-101.c
deleted file mode 100644 (file)
index 7d214c0..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  Cellvision/SparkLAN NFS-101U/WU support
- *
- *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-static struct adm5120_pci_irq nfs101_pci_irqs[] __initdata = {
-       /* miniPCI slot */
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-
-       /* ALi USB controller */
-       PCIIRQ(3, 0, 2, ADM5120_IRQ_PCI2),
-       PCIIRQ(3, 3, 1, ADM5120_IRQ_PCI1),
-
-       /* NEC USB controller */
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI2),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2),
-};
-
-static u8 nfs101_vlans[6] __initdata = {
-       /* FIXME: not tested */
-       0x5f, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init nfs101_setup(void)
-{
-       cas6xx_flash_setup();
-       cellvision_mac_setup();
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-       adm5120_add_device_switch(1, nfs101_vlans);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(nfs101_pci_irqs),
-                               nfs101_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_NFS101U, "NFS-101U", "Cellvision NFS-101U/101WU",
-            nfs101_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/Makefile
deleted file mode 100644 (file)
index 8d302c5..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Infineon/ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-obj-y  := adm5120.o setup.o prom.o irq.o memory.o clock.o \
-          gpio.o platform.o
-
-obj-$(CONFIG_EARLY_PRINTK)     += early-printk.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/adm5120.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/adm5120.c
deleted file mode 100644 (file)
index 2838834..0000000
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-unsigned int adm5120_product_code;
-unsigned int adm5120_revision;
-unsigned int adm5120_package;
-unsigned int adm5120_nand_boot;
-unsigned long adm5120_speed;
-
-/*
- * CPU settings detection
- */
-#define CODE_GET_PC(c)         ((c) & CODE_PC_MASK)
-#define CODE_GET_REV(c)                (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
-#define CODE_GET_PK(c)         (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
-#define CODE_GET_CLKS(c)       (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
-#define CODE_GET_NAB(c)                (((c) & CODE_NAB) != 0)
-
-void adm5120_ndelay(u32 ns)
-{
-       u32     t;
-
-       SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
-       SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-
-       t = (ns+640) / 640;
-       t &= TIMER_PERIOD_MASK;
-       SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE);
-
-       /* wait until the timer expires */
-       do {
-               t = SW_READ_REG(SWITCH_REG_TIMER_INT);
-       } while ((t & TIMER_INT_TOS) == 0);
-
-       /* leave the timer disabled */
-       SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
-       SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-}
-
-void __init adm5120_soc_init(void)
-{
-       u32 code;
-       u32 clks;
-
-       code = SW_READ_REG(SWITCH_REG_CODE);
-
-       adm5120_product_code = CODE_GET_PC(code);
-       adm5120_revision = CODE_GET_REV(code);
-       adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
-               ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
-       adm5120_nand_boot = CODE_GET_NAB(code);
-
-       clks = CODE_GET_CLKS(code);
-       adm5120_speed = ADM5120_SPEED_175;
-       if (clks & 1)
-               adm5120_speed += 25000000;
-       if (clks & 2)
-               adm5120_speed += 50000000;
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/clock.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/clock.c
deleted file mode 100644 (file)
index 52ae64c..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  ADM5120 minimal CLK API implementation
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was based on the CLK API implementation in:
- *     arch/mips/tx4938/toshiba_rbtx4938/setup.c
- *     Copyright (C) 2000-2001 Toshiba Corporation
- *     2003-2005 (c) MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-struct clk {
-       unsigned long rate;
-};
-
-static struct clk uart_clk = {
-       .rate = ADM5120_UART_CLOCK
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-       const char *name = dev_name(dev);
-
-       if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
-               return &uart_clk;
-
-       return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-       return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-       return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/early-printk.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/early-printk.c
deleted file mode 100644 (file)
index d900712..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  ADM5120 specific early printk support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_uart.h>
-
-#define UART_READ(r) \
-       __raw_readl((void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-#define UART_WRITE(r, v) \
-       __raw_writel((v), (void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-
-void __init prom_putchar(char ch)
-{
-       while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
-               ;
-       UART_WRITE(UART_REG_DATA, ch);
-       while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
-               ;
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/gpio.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/gpio.c
deleted file mode 100644 (file)
index 461ea15..0000000
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- *  ADM5120 generic GPIO API support via GPIOLIB
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define GPIO_REG(r)    (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-struct gpio1_desc {
-       void __iomem    *reg;           /* register address */
-       u8              iv_shift;       /* shift amount for input bit */
-       u8              mode_shift;     /* shift amount for mode bits */
-};
-
-#define GPIO1_DESC(p, l) {                                             \
-               .reg = GPIO_REG(SWITCH_REG_PORT0_LED + ((p) * 4)),      \
-               .iv_shift = LED0_IV_SHIFT + (l),                        \
-               .mode_shift = (l) * 4                                   \
-       }
-
-static struct gpio1_desc gpio1_table[15] = {
-       GPIO1_DESC(0, 0), GPIO1_DESC(0, 1), GPIO1_DESC(0, 2),
-       GPIO1_DESC(1, 0), GPIO1_DESC(1, 1), GPIO1_DESC(1, 2),
-       GPIO1_DESC(2, 0), GPIO1_DESC(2, 1), GPIO1_DESC(2, 2),
-       GPIO1_DESC(3, 0), GPIO1_DESC(3, 1), GPIO1_DESC(3, 2),
-       GPIO1_DESC(4, 0), GPIO1_DESC(4, 1), GPIO1_DESC(4, 2)
-};
-
-static u32 gpio_conf2;
-
-int adm5120_gpio_to_irq(unsigned gpio)
-{
-       int ret;
-
-       switch (gpio) {
-       case ADM5120_GPIO_PIN2:
-               ret = ADM5120_IRQ_GPIO2;
-               break;
-       case ADM5120_GPIO_PIN4:
-               ret = ADM5120_IRQ_GPIO4;
-               break;
-       default:
-               ret = -EINVAL;
-               break;
-       }
-
-       return ret;
-}
-EXPORT_SYMBOL(adm5120_gpio_to_irq);
-
-int adm5120_irq_to_gpio(unsigned irq)
-{
-       int ret;
-
-       switch (irq) {
-       case ADM5120_IRQ_GPIO2:
-               ret = ADM5120_GPIO_PIN2;
-               break;
-       case ADM5120_IRQ_GPIO4:
-               ret = ADM5120_GPIO_PIN4;
-               break;
-       default:
-               ret = -EINVAL;
-               break;
-       }
-
-       return ret;
-}
-EXPORT_SYMBOL(adm5120_irq_to_gpio);
-
-/*
- * Helpers for GPIO lines in GPIO_CONF0 register
- */
-#define PIN_IM(p)      ((1 << GPIO_CONF0_IM_SHIFT) << p)
-#define PIN_IV(p)      ((1 << GPIO_CONF0_IV_SHIFT) << p)
-#define PIN_OE(p)      ((1 << GPIO_CONF0_OE_SHIFT) << p)
-#define PIN_OV(p)      ((1 << GPIO_CONF0_OV_SHIFT) << p)
-
-int __adm5120_gpio0_get_value(unsigned offset)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = __raw_readl(reg);
-       if ((t & PIN_IM(offset)) != 0)
-               t &= PIN_IV(offset);
-       else
-               t &= PIN_OV(offset);
-
-       return (t) ? 1 : 0;
-}
-EXPORT_SYMBOL(__adm5120_gpio0_get_value);
-
-void __adm5120_gpio0_set_value(unsigned offset, int value)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = __raw_readl(reg);
-       if (value == 0)
-               t &= ~(PIN_OV(offset));
-       else
-               t |= PIN_OV(offset);
-
-       __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio0_set_value);
-
-static int adm5120_gpio0_get_value(struct gpio_chip *chip, unsigned offset)
-{
-       return __adm5120_gpio0_get_value(offset);
-}
-
-static void adm5120_gpio0_set_value(struct gpio_chip *chip,
-                                   unsigned offset, int value)
-{
-       __adm5120_gpio0_set_value(offset, value);
-}
-
-static int adm5120_gpio0_direction_input(struct gpio_chip *chip,
-                                        unsigned offset)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = __raw_readl(reg);
-       t &= ~(PIN_OE(offset));
-       t |= PIN_IM(offset);
-       __raw_writel(t, reg);
-
-       return 0;
-}
-
-static int adm5120_gpio0_direction_output(struct gpio_chip *chip,
-                                         unsigned offset, int value)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = __raw_readl(reg);
-       t &= ~(PIN_IM(offset) | PIN_OV(offset));
-       t |= PIN_OE(offset);
-
-       if (value)
-               t |= PIN_OV(offset);
-
-       __raw_writel(t, reg);
-
-       return 0;
-}
-
-static struct gpio_chip adm5120_gpio0_chip = {
-       .label                  = "adm5120 gpio0",
-       .get                    = adm5120_gpio0_get_value,
-       .set                    = adm5120_gpio0_set_value,
-       .direction_input        = adm5120_gpio0_direction_input,
-       .direction_output       = adm5120_gpio0_direction_output,
-       .base                   = ADM5120_GPIO_PIN0,
-       .ngpio                  = ADM5120_GPIO_PIN7 - ADM5120_GPIO_PIN0 + 1,
-};
-
-int __adm5120_gpio1_get_value(unsigned offset)
-{
-       void __iomem **reg;
-       u32 t, m;
-
-       reg = gpio1_table[offset].reg;
-
-       t = __raw_readl(reg);
-       m = (t >> gpio1_table[offset].mode_shift) & LED_MODE_MASK;
-       if (m == LED_MODE_INPUT)
-               return (t >> gpio1_table[offset].iv_shift) & 1;
-
-       if (m == LED_MODE_OUT_LOW)
-               return 0;
-
-       return 1;
-}
-EXPORT_SYMBOL(__adm5120_gpio1_get_value);
-
-void __adm5120_gpio1_set_value(unsigned offset, int value)
-{
-       void __iomem **reg;
-       u32 t, s;
-
-       reg = gpio1_table[offset].reg;
-       s = gpio1_table[offset].mode_shift;
-
-       t = __raw_readl(reg);
-       t &= ~(LED_MODE_MASK << s);
-
-       switch (value) {
-       case ADM5120_GPIO_LOW:
-               t |= (LED_MODE_OUT_LOW << s);
-               break;
-       case ADM5120_GPIO_FLASH:
-       case ADM5120_GPIO_LINK:
-       case ADM5120_GPIO_SPEED:
-       case ADM5120_GPIO_DUPLEX:
-       case ADM5120_GPIO_ACT:
-       case ADM5120_GPIO_COLL:
-       case ADM5120_GPIO_LINK_ACT:
-       case ADM5120_GPIO_DUPLEX_COLL:
-       case ADM5120_GPIO_10M_ACT:
-       case ADM5120_GPIO_100M_ACT:
-               t |= ((value & LED_MODE_MASK) << s);
-               break;
-       default:
-               t |= (LED_MODE_OUT_HIGH << s);
-               break;
-       }
-
-       __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio1_set_value);
-
-static int adm5120_gpio1_get_value(struct gpio_chip *chip, unsigned offset)
-{
-       return __adm5120_gpio1_get_value(offset);
-}
-
-static void adm5120_gpio1_set_value(struct gpio_chip *chip,
-                                   unsigned offset, int value)
-{
-       __adm5120_gpio1_set_value(offset, value);
-}
-
-static int adm5120_gpio1_direction_input(struct gpio_chip *chip,
-                                        unsigned offset)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = gpio1_table[offset].reg;
-       t = __raw_readl(reg);
-       t &= ~(LED_MODE_MASK << gpio1_table[offset].mode_shift);
-       __raw_writel(t, reg);
-
-       return 0;
-}
-
-static int adm5120_gpio1_direction_output(struct gpio_chip *chip,
-                                         unsigned offset, int value)
-{
-       __adm5120_gpio1_set_value(offset, value);
-       return 0;
-}
-
-static struct gpio_chip adm5120_gpio1_chip = {
-       .label                  = "adm5120 gpio1",
-       .get                    = adm5120_gpio1_get_value,
-       .set                    = adm5120_gpio1_set_value,
-       .direction_input        = adm5120_gpio1_direction_input,
-       .direction_output       = adm5120_gpio1_direction_output,
-       .base                   = ADM5120_GPIO_P0L0,
-       .ngpio                  = ADM5120_GPIO_P4L2 - ADM5120_GPIO_P0L0 + 1,
-};
-
-void __init adm5120_gpio_csx0_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_CSX0;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       gpio_request(ADM5120_GPIO_PIN1, "CSX0");
-}
-
-void __init adm5120_gpio_csx1_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_CSX1;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       gpio_request(ADM5120_GPIO_PIN3, "CSX1");
-}
-
-void __init adm5120_gpio_ew_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_EW;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       gpio_request(ADM5120_GPIO_PIN0, "EW");
-}
-
-void __init adm5120_gpio_init(void)
-{
-       int err;
-
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       if (adm5120_package_pqfp())
-               adm5120_gpio0_chip.ngpio = 4;
-
-       err = gpiochip_add(&adm5120_gpio0_chip);
-       if (err)
-               panic("cannot add ADM5120 GPIO0 chip, error=%d", err);
-
-       err = gpiochip_add(&adm5120_gpio1_chip);
-       if (err)
-               panic("cannot add ADM5120 GPIO1 chip, error=%d", err);
-
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/irq.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/irq.c
deleted file mode 100644 (file)
index a26e651..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- *  ADM5120 specific interrupt handlers
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-static void adm5120_intc_irq_unmask(struct irq_data *d);
-static void adm5120_intc_irq_mask(struct irq_data *d);
-static int  adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type);
-
-static inline void intc_write_reg(unsigned int reg, u32 val)
-{
-       void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
-       __raw_writel(val, base + reg);
-}
-
-static inline u32 intc_read_reg(unsigned int reg)
-{
-       void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
-       return __raw_readl(base + reg);
-}
-
-static struct irq_chip adm5120_intc_irq_chip = {
-       .name           = "INTC",
-       .irq_unmask     = adm5120_intc_irq_unmask,
-       .irq_mask       = adm5120_intc_irq_mask,
-       .irq_mask_ack   = adm5120_intc_irq_mask,
-       .irq_set_type   = adm5120_intc_irq_set_type
-};
-
-static struct irqaction adm5120_intc_irq_action = {
-       .handler        = no_action,
-       .name           = "cascade [INTC]"
-};
-
-static void adm5120_intc_irq_unmask(struct irq_data *d)
-{
-       intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE));
-}
-
-static void adm5120_intc_irq_mask(struct irq_data *d)
-{
-       intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE));
-}
-
-static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-       unsigned int irq = d->irq;
-       unsigned int sense;
-       unsigned long mode;
-       int err = 0;
-
-       sense = flow_type & (IRQ_TYPE_SENSE_MASK);
-       switch (sense) {
-       case IRQ_TYPE_NONE:
-       case IRQ_TYPE_LEVEL_HIGH:
-               break;
-       case IRQ_TYPE_LEVEL_LOW:
-               switch (irq) {
-               case ADM5120_IRQ_GPIO2:
-               case ADM5120_IRQ_GPIO4:
-                       break;
-               default:
-                       err = -EINVAL;
-                       break;
-               }
-               break;
-       default:
-               err = -EINVAL;
-               break;
-       }
-
-       if (err)
-               return err;
-
-       switch (irq) {
-       case ADM5120_IRQ_GPIO2:
-       case ADM5120_IRQ_GPIO4:
-               mode = intc_read_reg(INTC_REG_INT_MODE);
-               if (sense == IRQ_TYPE_LEVEL_LOW)
-                       mode |= (1 << (irq - ADM5120_INTC_IRQ_BASE));
-               else
-                       mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE));
-
-               intc_write_reg(INTC_REG_INT_MODE, mode);
-               break;
-       }
-
-       return 0;
-}
-
-static void adm5120_intc_irq_dispatch(void)
-{
-       unsigned long status;
-       int irq;
-
-       status = intc_read_reg(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
-       if (status) {
-               irq = ADM5120_INTC_IRQ_BASE + fls(status) - 1;
-               do_IRQ(irq);
-       } else
-               spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-       unsigned long pending;
-
-       pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-       if (pending & STATUSF_IP7)
-               do_IRQ(ADM5120_IRQ_COUNTER);
-       else if (pending & STATUSF_IP2)
-               adm5120_intc_irq_dispatch();
-       else
-               spurious_interrupt();
-}
-
-#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
-static void __init adm5120_intc_irq_init(void)
-{
-       int i;
-
-       /* disable all interrupts */
-       intc_write_reg(INTC_REG_IRQ_DISABLE, INTC_INT_ALL);
-
-       /* setup all interrupts to generate IRQ instead of FIQ */
-       intc_write_reg(INTC_REG_INT_MODE, 0);
-
-       /* set active level for all external interrupts to HIGH */
-       intc_write_reg(INTC_REG_INT_LEVEL, 0);
-
-       /* disable usage of the TEST_SOURCE register */
-       intc_write_reg(INTC_REG_IRQ_SOURCE_SELECT, 0);
-
-       for (i = ADM5120_INTC_IRQ_BASE;
-               i <= ADM5120_INTC_IRQ_BASE + INTC_IRQ_LAST;
-               i++) {
-               irq_set_chip_and_handler(i, &adm5120_intc_irq_chip,
-                       handle_level_irq);
-       }
-
-       setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
-}
-
-void __init arch_init_irq(void)
-{
-       mips_cpu_irq_init();
-       adm5120_intc_irq_init();
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/memory.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/memory.c
deleted file mode 100644 (file)
index d07266f..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_mpmc.h>
-
-#ifdef DEBUG
-#  define mem_dbg(f, a...)     printk(KERN_INFO "mem_detect: " f, ## a)
-#else
-#  define mem_dbg(f, a...)
-#endif
-
-unsigned long adm5120_memsize;
-
-#define MEM_READL(a)           __raw_readl((void __iomem *)(a))
-#define MEM_WRITEL(a, v)       __raw_writel((v), (void __iomem *)(a))
-
-static int __init mem_check_pattern(u8 *addr, unsigned long offs)
-{
-       u32 *p1 = (u32 *)addr;
-       u32 *p2 = (u32 *)(addr+offs);
-       u32 t, u, v;
-
-       /* save original value */
-       t = MEM_READL(p1);
-
-       u = MEM_READL(p2);
-       if (t != u)
-               return 0;
-
-       v = 0x55555555;
-       if (u == v)
-               v = 0xAAAAAAAA;
-
-       mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1);
-
-       MEM_WRITEL(p1, v);
-       adm5120_ndelay(1000);
-       u = MEM_READL(p2);
-
-       mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u);
-
-       /* restore original value */
-       MEM_WRITEL(p1, t);
-
-       return (v == u);
-}
-
-static void __init adm5120_detect_memsize(void)
-{
-       u32     memctrl;
-       u32     size, maxsize;
-       u8      *p;
-
-       memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL);
-       switch (memctrl & MEMCTRL_SDRS_MASK) {
-       case MEMCTRL_SDRS_4M:
-               maxsize = 4 << 20;
-               break;
-       case MEMCTRL_SDRS_8M:
-               maxsize = 8 << 20;
-               break;
-       case MEMCTRL_SDRS_16M:
-               maxsize = 16 << 20;
-               break;
-       default:
-               maxsize = 64 << 20;
-               break;
-       }
-
-       mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20);
-
-       /* detect size of the 1st SDRAM bank */
-       p = (u8 *)KSEG1ADDR(0);
-       for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
-               if (mem_check_pattern(p, size)) {
-                       /* mirrored address */
-                       mem_dbg("mirrored data found at offset 0x%08X\n", size);
-                       break;
-               }
-       }
-
-       mem_dbg("chip size in 1st bank is %uMB\n", size >> 20);
-       adm5120_memsize = size;
-
-       if (size != maxsize)
-               /* 2nd bank is not supported */
-               goto out;
-
-       if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
-               /* 2nd bank is disabled */
-               goto out;
-
-       /*
-        * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
-        * are missing.
-        */
-       mem_dbg("check presence of 2nd bank\n");
-
-       p = (u8 *)KSEG1ADDR(maxsize+size-4);
-       if (mem_check_pattern(p, 0))
-               adm5120_memsize += size;
-
-       if (maxsize != size) {
-               /* adjusting MECTRL register */
-               memctrl &= ~(MEMCTRL_SDRS_MASK);
-               switch (size>>20) {
-               case 4:
-                       memctrl |= MEMCTRL_SDRS_4M;
-                       break;
-               case 8:
-                       memctrl |= MEMCTRL_SDRS_8M;
-                       break;
-               case 16:
-                       memctrl |= MEMCTRL_SDRS_16M;
-                       break;
-               default:
-                       memctrl |= MEMCTRL_SDRS_64M;
-                       break;
-               }
-               SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl);
-       }
-
-out:
-       mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
-               size>>20);
-}
-
-void __init adm5120_mem_init(void)
-{
-       adm5120_detect_memsize();
-       add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/platform.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/platform.c
deleted file mode 100644 (file)
index bdbfbcb..0000000
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- *  ADM5120 generic platform devices
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_nand.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#if 1
-/*
- * TODO:remove global adm5120_eth* variables when the switch driver will be
- *     converted into a real platform driver
- */
-unsigned int adm5120_eth_num_ports = 6;
-EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
-
-unsigned char adm5120_eth_macs[6][6] = {
-       {'\00', 'A', 'D', 'M', '\x51', '\x20' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x21' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x22' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x23' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x24' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x25' }
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_macs);
-
-unsigned char adm5120_eth_vlans[6] = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x60
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
-#endif
-
-void __init adm5120_setup_eth_macs(u8 *mac_base)
-{
-       u32 t;
-       int i, j;
-
-       t = ((u32) mac_base[3] << 16) | ((u32) mac_base[4] << 8)
-               | ((u32) mac_base[5]);
-
-       for (i = 0; i < ARRAY_SIZE(adm5120_eth_macs); i++) {
-               for (j = 0; j < 3; j++)
-                       adm5120_eth_macs[i][j] = mac_base[j];
-
-               adm5120_eth_macs[i][3] = (t >> 16) & 0xff;
-               adm5120_eth_macs[i][4] = (t >> 8) & 0xff;
-               adm5120_eth_macs[i][5] = t & 0xff;
-
-               t++;
-       }
-}
-
-/*
- * Built-in ethernet switch
- */
-struct resource adm5120_switch_resources[] = {
-       [0] = {
-               .start  = ADM5120_SWITCH_BASE,
-               .end    = ADM5120_SWITCH_BASE+ADM5120_SWITCH_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = ADM5120_IRQ_SWITCH,
-               .end    = ADM5120_IRQ_SWITCH,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-struct adm5120_switch_platform_data adm5120_switch_data;
-struct platform_device adm5120_switch_device = {
-       .name           = "adm5120-switch",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(adm5120_switch_resources),
-       .resource       = adm5120_switch_resources,
-       .dev.platform_data = &adm5120_switch_data,
-};
-
-void __init adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map)
-{
-       if (num_ports > 0)
-               adm5120_eth_num_ports = num_ports;
-
-       if (vlan_map)
-               memcpy(adm5120_eth_vlans, vlan_map, sizeof(adm5120_eth_vlans));
-
-       platform_device_register(&adm5120_switch_device);
-}
-
-/*
- * USB Host Controller
- */
-struct resource adm5120_hcd_resources[] = {
-       [0] = {
-               .start  = ADM5120_USBC_BASE,
-               .end    = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = ADM5120_IRQ_USBC,
-               .end    = ADM5120_IRQ_USBC,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static u64 adm5120_hcd_dma_mask = DMA_BIT_MASK(24);
-struct platform_device adm5120_hcd_device = {
-       .name           = "adm5120-hcd",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(adm5120_hcd_resources),
-       .resource       = adm5120_hcd_resources,
-       .dev = {
-               .dma_mask               = &adm5120_hcd_dma_mask,
-               .coherent_dma_mask      = DMA_BIT_MASK(24),
-       }
-};
-
-void __init adm5120_add_device_usb(void)
-{
-       platform_device_register(&adm5120_hcd_device);
-}
-
-/*
- * NOR flash devices
- */
-struct adm5120_flash_platform_data adm5120_flash0_data;
-struct platform_device adm5120_flash0_device = {
-       .name                   = "adm5120-flash",
-       .id                     = 0,
-       .dev.platform_data      = &adm5120_flash0_data,
-};
-
-struct adm5120_flash_platform_data adm5120_flash1_data;
-struct platform_device adm5120_flash1_device = {
-       .name                   = "adm5120-flash",
-       .id                     = 1,
-       .dev.platform_data      = &adm5120_flash1_data,
-};
-
-void __init adm5120_add_device_flash(unsigned id)
-{
-       struct platform_device *pdev;
-
-       switch (id) {
-       case 0:
-               pdev = &adm5120_flash0_device;
-               break;
-       case 1:
-               pdev = &adm5120_flash1_device;
-               break;
-       default:
-               pdev = NULL;
-               break;
-       }
-
-       if (pdev)
-               platform_device_register(pdev);
-}
-
-/*
- * built-in UARTs
- */
-static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
-               unsigned int mctrl)
-{
-}
-
-struct amba_pl010_data adm5120_uart0_data = {
-       .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart0_device = {
-       .dev            = {
-               .init_name = "apb:uart0",
-               .platform_data = &adm5120_uart0_data,
-       },
-       .res            = {
-               .start  = ADM5120_UART0_BASE,
-               .end    = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       },
-       .irq            = { ADM5120_IRQ_UART0, 0 },
-       .periphid       = 0x0041010,
-};
-
-struct amba_pl010_data adm5120_uart1_data = {
-       .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart1_device = {
-       .dev            = {
-               .init_name = "apb:uart1",
-               .platform_data = &adm5120_uart1_data,
-       },
-       .res            = {
-               .start  = ADM5120_UART1_BASE,
-               .end    = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       },
-       .irq            = { ADM5120_IRQ_UART1, 0 },
-       .periphid       = 0x0041010,
-};
-
-void __init adm5120_add_device_uart(unsigned id)
-{
-       struct amba_device *dev;
-
-       switch (id) {
-       case 0:
-               dev = &adm5120_uart0_device;
-               break;
-       case 1:
-               dev = &adm5120_uart1_device;
-               break;
-       default:
-               dev = NULL;
-               break;
-       }
-
-       if (dev)
-               amba_device_register(dev, &iomem_resource);
-}
-
-/*
- * GPIO buttons
- */
-void __init adm5120_register_gpio_buttons(int id,
-                                         unsigned poll_interval,
-                                         unsigned nbuttons,
-                                         struct gpio_keys_button *buttons)
-{
-       struct platform_device *pdev;
-       struct gpio_keys_platform_data pdata;
-       struct gpio_keys_button *p;
-       int err;
-
-       p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
-       if (!p)
-               return;
-
-       pdev = platform_device_alloc("gpio-keys-polled", id);
-       if (!pdev)
-               goto err_free_buttons;
-
-       memset(&pdata, 0, sizeof(pdata));
-       pdata.poll_interval = poll_interval;
-       pdata.nbuttons = nbuttons;
-       pdata.buttons = p;
-
-       err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-       if (err)
-               goto err_put_pdev;
-
-       err = platform_device_add(pdev);
-       if (err)
-               goto err_put_pdev;
-
-       return;
-
-err_put_pdev:
-       platform_device_put(pdev);
-
-err_free_buttons:
-       kfree(p);
-}
-
-/*
- * GPIO LEDS
- */
-struct gpio_led_platform_data adm5120_gpio_leds_data;
-struct platform_device adm5120_gpio_leds_device = {
-       .name           = "leds-gpio",
-       .id             = -1,
-       .dev.platform_data = &adm5120_gpio_leds_data,
-};
-
-void __init adm5120_add_device_gpio_leds(unsigned num_leds,
-                                   struct gpio_led *leds)
-{
-       struct gpio_led *p;
-
-       p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
-       if (!p)
-               return;
-
-       memcpy(p, leds, num_leds * sizeof(*p));
-       adm5120_gpio_leds_data.num_leds = num_leds;
-       adm5120_gpio_leds_data.leds = p;
-
-       platform_device_register(&adm5120_gpio_leds_device);
-}
-
-/*
- * NAND flash
- */
-struct resource adm5120_nand_resources[] = {
-       [0] = {
-               .start  = ADM5120_NAND_BASE,
-               .end    = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-};
-
-static int adm5120_nand_ready(struct mtd_info *mtd)
-{
-       return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0);
-}
-
-static void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-                                       unsigned int ctrl)
-{
-       if (ctrl & NAND_CTRL_CHANGE) {
-               adm5120_nand_set_cle(ctrl & NAND_CLE);
-               adm5120_nand_set_ale(ctrl & NAND_ALE);
-               adm5120_nand_set_cen(ctrl & NAND_NCE);
-       }
-
-       if (cmd != NAND_CMD_NONE)
-               NAND_WRITE_REG(NAND_REG_DATA, cmd);
-}
-
-void __init adm5120_add_device_nand(struct platform_nand_data *pdata)
-{
-       struct platform_device *pdev;
-       int err;
-
-       pdev = platform_device_alloc("gen_nand", -1);
-       if (!pdev)
-               goto err_out;
-
-       err = platform_device_add_resources(pdev, adm5120_nand_resources,
-                                       ARRAY_SIZE(adm5120_nand_resources));
-       if (err)
-               goto err_put;
-
-       err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
-       if (err)
-               goto err_put;
-
-       pdata = pdev->dev.platform_data;
-       pdata->ctrl.dev_ready = adm5120_nand_ready;
-       pdata->ctrl.cmd_ctrl = adm5120_nand_cmd_ctrl;
-
-       err = platform_device_add(pdev);
-       if (err)
-               goto err_put;
-
-       return;
-
-err_put:
-       platform_device_put(pdev);
-err_out:
-       return;
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/prom.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/prom.c
deleted file mode 100644 (file)
index 5c52ea2..0000000
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- *  ADM5120 specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/cfe.h>
-#include <prom/generic.h>
-#include <prom/routerboot.h>
-#include <prom/myloader.h>
-#include <prom/zynos.h>
-
-unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC;
-
-struct board_desc {
-       unsigned long   mach_type;
-       char            *name;
-};
-
-#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
-static struct board_desc common_boards[] __initdata = {
-       /* Cellvision/SparkLAN boards */
-       DEFBOARD("CAS-630",     MACH_ADM5120_CAS630),
-       DEFBOARD("CAS-670",     MACH_ADM5120_CAS670),
-       DEFBOARD("CAS-700",     MACH_ADM5120_CAS700),
-       DEFBOARD("CAS-771",     MACH_ADM5120_CAS771),
-       DEFBOARD("CAS-790",     MACH_ADM5120_CAS790),
-       DEFBOARD("CAS-861",     MACH_ADM5120_CAS861),
-       DEFBOARD("NFS-101U",    MACH_ADM5120_NFS101U),
-       /* Compex boards */
-       DEFBOARD("WP54G-WRT",   MACH_ADM5120_WP54G_WRT),
-       /* Edimax boards */
-       DEFBOARD("BR-6104K",    MACH_ADM5120_BR6104K),
-       DEFBOARD("BR-6104KP",   MACH_ADM5120_BR6104KP),
-       DEFBOARD("BR-6104WG",   MACH_ADM5120_BR61X4WG),
-       DEFBOARD("BR-6114WG",   MACH_ADM5120_BR61X4WG),
-       /* Infineon boards */
-       DEFBOARD("EASY 5120P-ATA",      MACH_ADM5120_EASY5120PATA),
-       DEFBOARD("EASY 5120-RT",        MACH_ADM5120_EASY5120RT),
-       DEFBOARD("EASY 5120-WVoIP",     MACH_ADM5120_EASY5120WVOIP),
-       DEFBOARD("EASY 83000",          MACH_ADM5120_EASY83000),
-       /* Mikrotik RouterBOARDs */
-       DEFBOARD("111",         MACH_ADM5120_RB_11X),
-       DEFBOARD("112",         MACH_ADM5120_RB_11X),
-       DEFBOARD("133",         MACH_ADM5120_RB_133),
-       DEFBOARD("133C",        MACH_ADM5120_RB_133C),
-       DEFBOARD("133C3",       MACH_ADM5120_RB_133C),
-       DEFBOARD("150",         MACH_ADM5120_RB_153), /* it's intentional */
-       DEFBOARD("153",         MACH_ADM5120_RB_153),
-       DEFBOARD("192",         MACH_ADM5120_RB_192),
-       DEFBOARD("miniROUTER",  MACH_ADM5120_RB_150),
-       /* OSBRiDGE boards */
-       DEFBOARD("OSBRiDGE 5GXi",       MACH_ADM5120_5GXI),
-       /* Motorola boards */
-       DEFBOARD("Powerline MU Gateway", MACH_ADM5120_PMUGW),
-       /* Generic EB-214A */
-       DEFBOARD("ADM5120",     MACH_ADM5120_EB_214A),
-};
-
-static unsigned long __init find_machtype_byname(char *name)
-{
-       unsigned long ret;
-       int i;
-
-       ret = MACH_ADM5120_GENERIC;
-       if (name == NULL)
-               goto out;
-
-       if (*name == '\0')
-               goto out;
-
-       for (i = 0; i < ARRAY_SIZE(common_boards); i++) {
-               if (strcmp(common_boards[i].name, name) == 0) {
-                       ret = common_boards[i].mach_type;
-                       break;
-               }
-       }
-
-out:
-       return ret;
-}
-
-static unsigned long __init detect_machtype_routerboot(void)
-{
-       char *name;
-
-       name = routerboot_get_boardname();
-       return find_machtype_byname(name);
-}
-
-static unsigned long __init detect_machtype_generic(void)
-{
-       char *name;
-
-       name = generic_prom_getenv("board_name");
-       return find_machtype_byname(name);
-}
-
-unsigned long __init detect_machtype_cfe(void)
-{
-       char *name;
-
-       name = cfe_getenv("BOARD_NAME");
-       return find_machtype_byname(name);
-}
-
-static struct {
-       unsigned long   mach_type;
-       u16             vendor_id;
-       u16             board_id;
-} zynos_boards[] __initdata = {
-#define ZYNOS_BOARD(vi, bi, mt) \
-       {.vendor_id = (vi), .board_id = (bi), .mach_type = (mt)}
-
-#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
-#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
-#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
-       ZYXEL_BOARD(ZYNOS_BOARD_HS100,  MACH_ADM5120_HS100),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334U,  MACH_ADM5120_P334U),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334W,  MACH_ADM5120_P334W),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WT_ALT,     MACH_ADM5120_P334WT),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335,   MACH_ADM5120_P335),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335U,  MACH_ADM5120_P335U)
-};
-
-static unsigned long __init detect_machtype_bootbase(void)
-{
-       int i;
-
-       for (i = 0; i < ARRAY_SIZE(zynos_boards); i++) {
-               if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
-                       zynos_boards[i].board_id == bootbase_info.board_id) {
-                       return zynos_boards[i].mach_type;
-                       break;
-               }
-       }
-
-       printk(KERN_WARNING "Unknown ZyXEL model (%u)\n",
-                               bootbase_info.board_id);
-       return MACH_ADM5120_GENERIC;
-}
-
-static struct {
-       unsigned long   mach_type;
-       u16     vid;
-       u16     did;
-       u16     svid;
-       u16     sdid;
-} mylo_boards[]  __initdata = {
-#define MYLO_BOARD(v, d, sv, sd, mt) \
-       {.vid = (v), .did = (d), .svid = (sv), .sdid = (sd), .mach_type = (mt)}
-#define COMPEX_BOARD(d, mt) \
-       MYLO_BOARD(VENID_COMPEX, (d), VENID_COMPEX, (d), (mt))
-
-       COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
-       COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
-       COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
-       COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54),
-       COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
-       COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54),
-       COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WP54),
-       COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WP54),
-};
-
-static unsigned long __init detect_machtype_myloader(void)
-{
-       unsigned long ret;
-       int i;
-
-       ret = MACH_ADM5120_GENERIC;
-       for (i = 0; i < ARRAY_SIZE(mylo_boards); i++) {
-               if (mylo_boards[i].vid == myloader_info.vid &&
-                       mylo_boards[i].did == myloader_info.did &&
-                       mylo_boards[i].svid == myloader_info.svid &&
-                       mylo_boards[i].sdid == myloader_info.sdid) {
-                       ret = mylo_boards[i].mach_type;
-                       break;
-               }
-       }
-
-       return ret;
-}
-
-static void __init prom_detect_machtype(void)
-{
-       if (bootbase_present()) {
-               adm5120_prom_type = ADM5120_PROM_BOOTBASE;
-               mips_machtype = detect_machtype_bootbase();
-               return;
-       }
-
-       if (cfe_present()) {
-               adm5120_prom_type = ADM5120_PROM_CFE;
-               mips_machtype = detect_machtype_cfe();
-               return;
-       }
-
-       if (myloader_present()) {
-               adm5120_prom_type = ADM5120_PROM_MYLOADER;
-               mips_machtype = detect_machtype_myloader();
-               return;
-       }
-
-       if (routerboot_present()) {
-               adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
-               mips_machtype = detect_machtype_routerboot();
-               return;
-       }
-
-       if (generic_prom_present()) {
-               adm5120_prom_type = ADM5120_PROM_GENERIC;
-               mips_machtype = detect_machtype_generic();
-               return;
-       }
-
-       mips_machtype = MACH_ADM5120_GENERIC;
-}
-
-#ifdef CONFIG_IMAGE_CMDLINE_HACK
-extern char __image_cmdline[];
-
-static void __init prom_init_cmdline(void)
-{
-       char *cmd;
-
-       /* init command line, register a default kernel command line */
-       cmd = __image_cmdline;
-       if (strlen(cmd) > 0)
-               strlcpy(arcs_cmdline, cmd, sizeof(arcs_cmdline));
-
-}
-#else
-static inline void prom_init_cmdline(void) {}
-#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-
-void __init prom_init(void)
-{
-       prom_detect_machtype();
-       prom_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
-       /* We do not have to prom memory to free */
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/setup.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/common/setup.c
deleted file mode 100644 (file)
index c0410af..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  ADM5120 specific setup
- *
- *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices
- *     Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/mips_machine.h>
-#include <asm/idle.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#define ADM5120_SYS_TYPE_LEN   64
-
-unsigned char adm5120_sys_type[ADM5120_SYS_TYPE_LEN];
-void (*adm5120_board_reset)(void);
-
-static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
-       [ADM5120_PROM_GENERIC]          = "Generic",
-       [ADM5120_PROM_CFE]              = "CFE",
-       [ADM5120_PROM_UBOOT]            = "U-Boot",
-       [ADM5120_PROM_MYLOADER]         = "MyLoader",
-       [ADM5120_PROM_ROUTERBOOT]       = "RouterBOOT",
-       [ADM5120_PROM_BOOTBASE]         = "Bootbase"
-};
-
-static void __init adm5120_report(void)
-{
-       printk(KERN_INFO "SoC      : %s\n", adm5120_sys_type);
-       printk(KERN_INFO "Bootdev  : %s flash\n",
-               adm5120_nand_boot ? "NAND" : "NOR");
-       printk(KERN_INFO "Prom     : %s\n", prom_names[adm5120_prom_type]);
-}
-
-const char *get_system_type(void)
-{
-       return adm5120_sys_type;
-}
-
-static void adm5120_restart(char *command)
-{
-       /* TODO: stop switch before reset */
-
-       if (adm5120_board_reset)
-               adm5120_board_reset();
-
-       SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
-}
-
-static void adm5120_halt(void)
-{
-       local_irq_disable();
-
-       while (1) {
-               if (cpu_wait)
-                       cpu_wait();
-       }
-}
-
-void __init plat_time_init(void)
-{
-       mips_hpt_frequency = adm5120_speed / 2;
-}
-
-void __init plat_mem_setup(void)
-{
-       adm5120_soc_init();
-       adm5120_mem_init();
-
-       sprintf(adm5120_sys_type, "ADM%04X%s rev %u, running at %lu.%03lu MHz",
-               adm5120_product_code,
-               adm5120_package_bga() ? "" : "P",
-               adm5120_revision,
-               (adm5120_speed / 1000000), (adm5120_speed / 1000) % 1000);
-
-       adm5120_report();
-
-       _machine_restart = adm5120_restart;
-       _machine_halt = adm5120_halt;
-       pm_power_off = adm5120_halt;
-
-       set_io_port_base(KSEG1);
-}
-
-static int __init adm5120_board_setup(void)
-{
-       adm5120_gpio_init();
-
-       mips_machine_setup();
-
-       return 0;
-}
-arch_initcall(adm5120_board_setup);
-
-static void __init adm5120_generic_board_setup(void)
-{
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-       adm5120_add_device_switch(6, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_GENERIC, "Generic", "Generic ADM5120 board",
-            adm5120_generic_board_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/Makefile
deleted file mode 100644 (file)
index 8c66c17..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y  += compex.o
-
-obj-$(CONFIG_ADM5120_MACH_NP27G)       += np27g.o
-obj-$(CONFIG_ADM5120_MACH_NP28G)       += np28g.o
-obj-$(CONFIG_ADM5120_MACH_WP54)                += wp54.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/compex.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/compex.c
deleted file mode 100644 (file)
index 814acfb..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  Compex boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-#include <asm/mach-adm5120/prom/myloader.h>
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-void __init compex_mac_setup(void)
-{
-       if (myloader_present()) {
-               int i;
-
-               for (i = 0; i < 6; i++) {
-                       if (is_valid_ether_addr(myloader_info.macs[i]))
-                               memcpy(adm5120_eth_macs[i],
-                                       myloader_info.macs[i], ETH_ALEN);
-                       else
-                               random_ether_addr(adm5120_eth_macs[i]);
-               }
-       } else {
-               u8 mac[ETH_ALEN];
-
-               random_ether_addr(mac);
-               adm5120_setup_eth_macs(mac);
-       }
-}
-
-void __init compex_generic_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       compex_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/compex.h b/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/compex.h
deleted file mode 100644 (file)
index 124e676..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Compex boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void compex_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/np27g.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/np27g.c
deleted file mode 100644 (file)
index 82da46d..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  Compex NP27G board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-static u8 np27g_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init np27g_setup(void)
-{
-       compex_generic_setup();
-       adm5120_add_device_switch(5, np27g_vlans);
-       adm5120_add_device_usb();
-
-       /* TODO: add PCI IRQ map */
-}
-
-MIPS_MACHINE(MACH_ADM5120_NP27G, "NP27G", "Compex NetPassage 27G", np27g_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/np28g.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/np28g.c
deleted file mode 100644 (file)
index a541439..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  Compex NP28G board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct gpio_led np28g_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN3, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN6, "wan_cond",     NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN7, "wifi",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L2, "usb1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L2, "usb2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L2, "usb3",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L2, "usb4",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan",          NULL),
-};
-
-static u8 np28g_vlans[6] __initdata = {
-       0x50, 0x42, 0x44, 0x48, 0x00, 0x00
-};
-
-static void np28g_reset(void)
-{
-       gpio_set_value(ADM5120_GPIO_PIN4, 0);
-}
-
-static void __init np28g_setup(void)
-{
-       compex_generic_setup();
-
-       /* setup reset line */
-       gpio_request(ADM5120_GPIO_PIN4, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN4, 1);
-       adm5120_board_reset = np28g_reset;
-
-       adm5120_add_device_switch(4, np28g_vlans);
-       adm5120_add_device_usb();
-
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(np28g_gpio_leds),
-                                       np28g_gpio_leds);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(np28g_pci_irqs), np28g_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_NP28G, "NP28G", "Compex NetPassage 28G", np28g_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/wp54.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/compex/wp54.c
deleted file mode 100644 (file)
index 8aa35c5..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  Compex WP54 board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-#define WP54_KEYS_POLL_INTERVAL                20
-#define WP54_KEYS_DEBOUNCE_INTERVAL    (3 * WP54_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wp54g_wrt_partitions[] = {
-       {
-               .name   = "cfe",
-               .offset = 0,
-               .size   = 0x050000,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "trx",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 0x3A0000,
-       } , {
-               .name   = "nvram",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 0x010000,
-       }
-};
-
-static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_keys_button wp54_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset_button",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = WP54_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN4,
-       }
-};
-
-static struct gpio_led wp54_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN7, "wan",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL),
-};
-
-static u8 wp54_vlans[6] __initdata = {
-       0x41, 0x42, 0x00, 0x00, 0x00, 0x00
-};
-
-static void wp54_reset(void)
-{
-       gpio_set_value(ADM5120_GPIO_PIN3, 0);
-}
-
-static void __init wp54_setup(void)
-{
-       compex_generic_setup();
-
-       /* setup reset line */
-       gpio_request(ADM5120_GPIO_PIN3, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN3, 1);
-       adm5120_board_reset = wp54_reset;
-
-       adm5120_add_device_switch(2, wp54_vlans);
-       adm5120_register_gpio_buttons(-1, WP54_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(wp54_gpio_buttons),
-                                     wp54_gpio_buttons);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(wp54_gpio_leds),
-                                       wp54_gpio_leds);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(wp54_pci_irqs), wp54_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_WP54, "WP54", "Compex WP54 family", wp54_setup);
-
-static void __init wp54_wrt_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
-       adm5120_flash0_data.parts = wp54g_wrt_partitions;
-
-       wp54_setup();
-}
-
-MIPS_MACHINE(MACH_ADM5120_WP54G_WRT, "WP54G-WRT", "Compex WP54G-WRT",
-            wp54_wrt_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/Makefile
deleted file mode 100644 (file)
index 1286ed4..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y  := br-61xx.o
-
-obj-$(CONFIG_ADM5120_MACH_BR_6104K)    += br-6104k.o
-obj-$(CONFIG_ADM5120_MACH_BR_6104KP)   += br-6104kp.o
-obj-$(CONFIG_ADM5120_MACH_BR_61X4WG)   += br-61x4wg.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-6104k.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-6104k.c
deleted file mode 100644 (file)
index 8b2b445..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Edimax BR-6104K board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct gpio_led br6104k_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",  NULL),
-};
-
-static void __init br6104k_setup(void)
-{
-       br61xx_generic_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104k_gpio_leds),
-                                       br6104k_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR6104K, "BR-6104K", "Edimax BR-6104K",
-            br6104k_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-6104kp.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-6104kp.c
deleted file mode 100644 (file)
index 034575d..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Edimax BR-6104KP board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct gpio_led br6104kp_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN3, "usb1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN1, "usb2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",  NULL),
-};
-
-static void __init br6104kp_setup(void)
-{
-       br61xx_generic_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104kp_gpio_leds),
-                                       br6104kp_gpio_leds);
-       adm5120_add_device_usb();
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR6104KP, "BR-6104KP", "Edimax BR-6104KP",
-            br6104kp_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61x4wg.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61x4wg.c
deleted file mode 100644 (file)
index 5d57507..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  Edimax BR-6104Wg/6114WG board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct adm5120_pci_irq br61x4wg_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_led br61x4wg_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "power",        NULL),
-       GPIO_LED_STD(ADM5120_GPIO_PIN5, "wlan",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",  NULL),
-};
-
-static void __init br61x4wg_setup(void)
-{
-       br61xx_generic_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(br61x4wg_gpio_leds),
-                                       br61x4wg_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(br61x4wg_pci_irqs),
-                                       br61x4wg_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR61X4WG, "BR-6104WG", "Edimax BR-6104WG/6114WG",
-            br61x4wg_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61xx.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61xx.c
deleted file mode 100644 (file)
index 62a1cee..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  Edimax BR-61xx support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-#include <prom/admboot.h>
-
-#define BR61XX_CONFIG_OFFSET   0x8000
-#define BR61XX_CONFIG_SIZE             0x1000
-
-#define BR61XX_KEYS_POLL_INTERVAL      20
-#define BR61XX_KEYS_DEBOUNCE_INTERVAL  (3 * BR61XX_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition br61xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct gpio_keys_button br61xx_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset_button",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = BR61XX_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN2,
-       }
-};
-
-static u8 br61xx_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init br61xx_mac_setup(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(BR61XX_CONFIG_OFFSET,
-                                  BR61XX_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-void __init br61xx_generic_setup(void)
-{
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
-       adm5120_flash0_data.parts = br61xx_partitions;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_switch(5, br61xx_vlans);
-
-       adm5120_register_gpio_buttons(-1, BR61XX_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(br61xx_gpio_buttons),
-                                     br61xx_gpio_buttons);
-
-       br61xx_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61xx.h b/target/linux/adm5120/files-3.14/arch/mips/adm5120/edimax/br-61xx.h
deleted file mode 100644 (file)
index c4a9ece..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Edimax BR-61xx board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void __init br61xx_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/generic/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/generic/Makefile
deleted file mode 100644 (file)
index 0c032e3..0000000
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_EB_214A)     += eb-214a.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/generic/eb-214a.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/generic/eb-214a.c
deleted file mode 100644 (file)
index cf491a1..0000000
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  EB-214A board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2010 Cezary Jackiewicz <cezary@eko.one.pl>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-
-#define EB214A_CONFIG_OFFSET   0x4000
-
-#define EB214A_KEYS_POLL_INTERVAL      20
-#define EB214A_KEYS_DEBOUNCE_INTERVAL  (3 * EB214A_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition eb214a_partitions[] = {
-       {
-               .name   = "bootloader",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct adm5120_pci_irq eb214a_pci_irqs[] __initdata = {
-       PCIIRQ(4, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(4, 1, 2, ADM5120_IRQ_PCI0),
-       PCIIRQ(4, 2, 3, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_led eb214a_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN7, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan",          NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "usb1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "usb2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L2, "usb3",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "usb4",         NULL),
-};
-
-static struct gpio_keys_button eb214a_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = EB214A_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN1,
-       }
-};
-
-static u8 eb214a_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init eb214a_mac_setup(void)
-{
-       u8 mac_base[6];
-       u8 *cfg;
-       int i;
-
-       cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + EB214A_CONFIG_OFFSET);
-       for (i = 0; i < 6; i++)
-               mac_base[i] = cfg[i];
-
-       if (!is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-static void __init eb214a_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions);
-       adm5120_flash0_data.parts = eb214a_partitions;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       /* adm5120_add_device_uart(1); */
-
-       adm5120_add_device_switch(5, eb214a_vlans);
-
-       eb214a_mac_setup();
-
-       adm5120_register_gpio_buttons(-1, EB214A_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(eb214a_gpio_buttons),
-                                     eb214a_gpio_buttons);
-
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(eb214a_gpio_leds),
-                                       eb214a_gpio_leds);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(eb214a_pci_irqs),
-                                       eb214a_pci_irqs);
-       /* adm5120_add_device_usb(); */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EB_214A, "EB-214A", "Generic EB-214A", eb214a_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/Makefile
deleted file mode 100644 (file)
index 49453cb..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-obj-y  += infineon.o
-
-obj-$(CONFIG_ADM5120_MACH_EASY5120_RT)         += easy5120-rt.o
-obj-$(CONFIG_ADM5120_MACH_EASY5120_WVOIP)      += easy5120-wvoip.o
-obj-$(CONFIG_ADM5120_MACH_EASY5120P_ATA)       += easy5120p-ata.o
-obj-$(CONFIG_ADM5120_MACH_EASY83000)           += easy83000.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120-rt.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120-rt.c
deleted file mode 100644 (file)
index 31eaee7..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  Infineon EASY 5120-RT Reference Board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static struct gpio_led easy5120_rt_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN6, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan0_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan0_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan",          NULL),
-};
-
-static struct adm5120_pci_irq easy5120_rt_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 easy5120_rt_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init easy5120_rt_setup(void)
-{
-       easy_setup_bga();
-
-       adm5120_add_device_switch(5, easy5120_rt_vlans);
-       adm5120_add_device_usb();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(easy5120_rt_gpio_leds),
-                                       easy5120_rt_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(easy5120_rt_pci_irqs),
-                               easy5120_rt_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120RT, "EASY5120-RT",
-            "Infineon EASY 5120-RT Reference Board", easy5120_rt_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120-wvoip.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120-wvoip.c
deleted file mode 100644 (file)
index 0bf404c..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  Infineon EASY 5120-WVoIP Reference Board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy5120wvoip_setup(void)
-{
-       easy_setup_bga();
-       adm5120_add_device_switch(6, NULL);
-
-       /* TODO: add VINETIC2 device */
-       /* TODO: setup PCI IRQ map */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120WVOIP, "EASY5120WVoIP",
-            "Infineon EASY 5120-WVoIP Reference Board", easy5120wvoip_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120p-ata.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy5120p-ata.c
deleted file mode 100644 (file)
index fafe023..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Infineon EASY 5120P-ATA Reference Board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy5120pata_setup(void)
-{
-       easy_setup_pqfp();
-
-       adm5120_add_device_switch(6, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120PATA, "EASY5120P-ATA",
-            "Infineon EASY 5120P-ATA Reference Board", easy5120pata_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy83000.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/easy83000.c
deleted file mode 100644 (file)
index 051b852..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Infineon EASY 83000 Reference Board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy83000_setup(void)
-{
-       easy_setup_pqfp();
-       adm5120_add_device_switch(6, NULL);
-
-       /* TODO: add VINAX device */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY83000, "EASY8300",
-            "Infineon EASY 83000 Reference Board", easy83000_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.c
deleted file mode 100644 (file)
index 5c441da..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  Infineon Reference Boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-#include <prom/admboot.h>
-
-#define EASY_CONFIG_OFFSET     0x10000
-#define EASY_CONFIG_SIZE       0x1000
-
-static struct mtd_partition easy_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "boardcfg",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static __init void easy_setup_mac(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(EASY_CONFIG_OFFSET,
-                                  EASY_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-static void switch_bank_gpio3(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN3, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN3, 1);
-               break;
-       }
-}
-
-void __init easy_setup_pqfp(void)
-{
-       /* setup flash A20 line */
-       gpio_request(ADM5120_GPIO_PIN3, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN3, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-       adm5120_flash0_data.parts = easy_partitions;
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-
-       easy_setup_mac();
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-void __init easy_setup_bga(void)
-{
-       /* setup flash A20 line */
-       gpio_request(ADM5120_GPIO_PIN5, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-       adm5120_flash0_data.parts = easy_partitions;
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-
-       easy_setup_mac();
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.h b/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.h
deleted file mode 100644 (file)
index a5f28b4..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Infineon Reference Boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-extern void easy_setup_pqfp(void) __init;
-extern void easy_setup_bga(void) __init;
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/Makefile
deleted file mode 100644 (file)
index 34ea0a3..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-obj-y  += rb-1xx.o
-
-obj-${CONFIG_ADM5120_MACH_RB_11X}      += rb-11x.o
-obj-${CONFIG_ADM5120_MACH_RB_133}      += rb-133.o
-obj-${CONFIG_ADM5120_MACH_RB_133C}     += rb-133c.o
-obj-${CONFIG_ADM5120_MACH_RB_150}      += rb-150.o
-obj-${CONFIG_ADM5120_MACH_RB_153}      += rb-153.o
-obj-${CONFIG_ADM5120_MACH_RB_192}      += rb-192.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-11x.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-11x.c
deleted file mode 100644 (file)
index fd768d8..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 111/112 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb11x_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN3, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan_speed",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact",   NULL),
-};
-
-static u8 rb11x_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb11x_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-
-       adm5120_add_device_switch(1, rb11x_vlans);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb11x_gpio_leds),
-                                       rb11x_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_11X, "11x", "Mikrotik RouterBOARD 111/112",
-            rb11x_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-133.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-133.c
deleted file mode 100644 (file)
index 23c5782..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 133 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb133_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN6, "power",        NULL),
-       GPIO_LED_STD(ADM5120_GPIO_PIN5, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan3_lnkact",  NULL),
-};
-
-static u8 rb133_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb133_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-
-       adm5120_add_device_switch(3, rb133_vlans);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133_gpio_leds),
-                                       rb133_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_133, "133", "Mikrotik RouterBOARD 133",
-            rb133_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-133c.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-133c.c
deleted file mode 100644 (file)
index 25bab70..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 133C support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb133c_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN6, "power",        NULL),
-       GPIO_LED_STD(ADM5120_GPIO_PIN5, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact",  NULL),
-};
-
-static u8 rb133c_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb133c_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-
-       adm5120_add_device_switch(1, rb133c_vlans);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133c_gpio_leds),
-                                       rb133c_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_133C, "133C", "Mikrotik RouterBOARD 133C",
-            rb133c_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-150.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-150.c
deleted file mode 100644 (file)
index 96a8c1b..0000000
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 150 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-#define RB150_NAND_BASE                0x1FC80000
-#define RB150_NAND_SIZE                1
-
-#define RB150_GPIO_NAND_READY  ADM5120_GPIO_PIN0
-#define RB150_GPIO_NAND_NCE    ADM5120_GPIO_PIN1
-#define RB150_GPIO_NAND_CLE    ADM5120_GPIO_P2L2
-#define RB150_GPIO_NAND_ALE    ADM5120_GPIO_P3L2
-#define RB150_GPIO_RESET_BUTTON        ADM5120_GPIO_PIN1 /* FIXME */
-
-#define RB150_NAND_DELAY       100
-
-#define RB150_NAND_WRITE(v) \
-       writeb((v), (void __iomem *)KSEG1ADDR(RB150_NAND_BASE))
-
-static struct resource rb150_nand_resources[] __initdata = {
-       [0] = {
-               .start  = RB150_NAND_BASE,
-               .end    = RB150_NAND_BASE + RB150_NAND_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-};
-
-static struct gpio_led rb150_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_P0L2, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_led2",    NULL),
-};
-
-static u8 rb150_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static int rb150_nand_dev_ready(struct mtd_info *mtd)
-{
-       return gpio_get_value(RB150_GPIO_NAND_READY);
-}
-
-static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-               unsigned int ctrl)
-{
-       if (ctrl & NAND_CTRL_CHANGE) {
-               gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0);
-               gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0);
-               gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1);
-       }
-
-       udelay(RB150_NAND_DELAY);
-
-       if (cmd != NAND_CMD_NONE)
-               RB150_NAND_WRITE(cmd);
-}
-
-static void __init rb150_add_device_nand(void)
-{
-       struct platform_device *pdev;
-       int err;
-
-       /* setup GPIO pins for NAND flash chip */
-       gpio_request(RB150_GPIO_NAND_READY, "nand-ready");
-       gpio_direction_input(RB150_GPIO_NAND_READY);
-       gpio_request(RB150_GPIO_NAND_NCE, "nand-nce");
-       gpio_direction_output(RB150_GPIO_NAND_NCE, 1);
-       gpio_request(RB150_GPIO_NAND_CLE, "nand-cle");
-       gpio_direction_output(RB150_GPIO_NAND_CLE, 0);
-       gpio_request(RB150_GPIO_NAND_ALE, "nand-ale");
-       gpio_direction_output(RB150_GPIO_NAND_ALE, 0);
-
-       pdev = platform_device_alloc("gen_nand", -1);
-       if (!pdev)
-               goto err_out;
-
-       err = platform_device_add_resources(pdev, rb150_nand_resources,
-                                       ARRAY_SIZE(rb150_nand_resources));
-       if (err)
-               goto err_put;
-
-
-       rb1xx_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl;
-       rb1xx_nand_data.ctrl.dev_ready = rb150_nand_dev_ready;
-
-       err = platform_device_add_data(pdev, &rb1xx_nand_data,
-                                       sizeof(rb1xx_nand_data));
-       if (err)
-               goto err_put;
-
-       err = platform_device_add(pdev);
-       if (err)
-               goto err_put;
-
-       return;
-
-err_put:
-       platform_device_put(pdev);
-err_out:
-       return;
-}
-
-static void __init rb150_setup(void)
-{
-       rb1xx_gpio_buttons[0].gpio = RB150_GPIO_RESET_BUTTON;
-       rb1xx_generic_setup();
-       rb150_add_device_nand();
-
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb150_gpio_leds),
-                                       rb150_gpio_leds);
-       adm5120_add_device_switch(5, rb150_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_150, "miniROUTER", "Mikrotik RouterBOARD 150",
-            rb150_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-153.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-153.c
deleted file mode 100644 (file)
index 8456684..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 153 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct resource rb153_cf_resources[] __initdata = {
-       {
-               .name   = "cf_membase",
-               .start  = ADM5120_EXTIO1_BASE,
-               .end    = ADM5120_EXTIO1_BASE + ADM5120_EXTIO1_SIZE-1 ,
-               .flags  = IORESOURCE_MEM
-       }, {
-               .name   = "cf_irq",
-               .start  = ADM5120_IRQ_GPIO4,
-               .end    = ADM5120_IRQ_GPIO4,
-               .flags  = IORESOURCE_IRQ
-       }
-};
-
-static struct gpio_led rb153_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN5, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact",  NULL),
-};
-
-static u8 rb153_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb153_add_device_cf(void)
-{
-       /* enable CSX1:INTX1 on GPIO[3:4] for the CF slot */
-       adm5120_gpio_csx1_enable();
-
-       /* enable the wait state pin GPIO[0] for external I/O control */
-       adm5120_gpio_ew_enable();
-
-       platform_device_register_simple("pata-rb153-cf", -1,
-                       rb153_cf_resources, ARRAY_SIZE(rb153_cf_resources));
-}
-
-static void __init rb153_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-       rb153_add_device_cf();
-
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb153_gpio_leds),
-                                       rb153_gpio_leds);
-       adm5120_add_device_switch(5, rb153_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_153, "150", "Mikrotik RouterBOARD 153",
-            rb153_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-192.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-192.c
deleted file mode 100644 (file)
index 9049421..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 192 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static u8 rb192_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb192_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-
-       adm5120_add_device_switch(6, rb192_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_192, "192", "Mikrotik RouterBOARD 192",
-            rb192_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-1xx.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-1xx.c
deleted file mode 100644 (file)
index 8961115..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 1xx series support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  NAND initialization code was based on a driver for Linux 2.6.19+ which
- *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series boards.
- *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-#define RB1XX_NAND_CHIP_DELAY  25
-
-#define RB1XX_KEYS_POLL_INTERVAL       20
-#define RB1XX_KEYS_DEBOUNCE_INTERVAL   (3 * RB1XX_KEYS_POLL_INTERVAL)
-
-static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
-       PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition rb1xx_nor_parts[] = {
-       {
-               .name   = "booter",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct mtd_partition rb1xx_nand_parts[] = {
-       {
-               .name   = "kernel",
-               .offset = 0,
-               .size   = 4 * 1024 * 1024,
-       } , {
-               .name   = "rootfs",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = MTDPART_SIZ_FULL
-       }
-};
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.  So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb1xx_nand_ecclayout = {
-       .eccbytes       = 6,
-       .eccpos         = { 8, 9, 10, 13, 14, 15 },
-       .oobavail       = 9,
-       .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-/*--------------------------------------------------------------------------*/
-
-static int rb1xx_nand_fixup(struct mtd_info *mtd)
-{
-       struct nand_chip *chip = mtd->priv;
-
-       if (mtd->writesize == 512)
-               chip->ecc.layout = &rb1xx_nand_ecclayout;
-
-       return 0;
-}
-
-struct platform_nand_data rb1xx_nand_data __initdata = {
-       .chip = {
-               .nr_chips       = 1,
-               .nr_partitions  = ARRAY_SIZE(rb1xx_nand_parts),
-               .partitions     = rb1xx_nand_parts,
-               .chip_delay     = RB1XX_NAND_CHIP_DELAY,
-               .chip_fixup     = rb1xx_nand_fixup,
-       },
-};
-
-struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset_button",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN7,
-       }
-};
-
-static void __init rb1xx_mac_setup(void)
-{
-       if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) {
-               adm5120_setup_eth_macs(rb_hs.mac_base);
-       } else {
-               u8 mac[ETH_ALEN];
-
-               random_ether_addr(mac);
-               adm5120_setup_eth_macs(mac);
-       }
-}
-
-void __init rb1xx_add_device_flash(void)
-{
-       /* setup data for flash0 device */
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
-       adm5120_flash0_data.parts = rb1xx_nor_parts;
-       adm5120_flash0_data.window_size = 128*1024;
-
-       adm5120_add_device_flash(0);
-}
-
-void __init rb1xx_add_device_nand(void)
-{
-       /* enable NAND flash interface */
-       adm5120_nand_enable();
-
-       /* initialize NAND chip */
-       adm5120_nand_set_spn(1);
-       adm5120_nand_set_wpn(0);
-
-       adm5120_add_device_nand(&rb1xx_nand_data);
-}
-
-void __init rb1xx_generic_setup(void)
-{
-       if (adm5120_package_bga())
-               adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs),
-                                       rb1xx_pci_irqs);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(rb1xx_gpio_buttons),
-                                     rb1xx_gpio_buttons);
-
-       rb1xx_add_device_flash();
-       rb1xx_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-1xx.h b/target/linux/adm5120/files-3.14/arch/mips/adm5120/mikrotik/rb-1xx.h
deleted file mode 100644 (file)
index 05e68bd..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 1xx series support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_nand.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/routerboot.h>
-
-extern struct platform_nand_data rb1xx_nand_data __initdata;
-extern struct gpio_keys_button rb1xx_gpio_buttons[] __initdata;
-
-extern void rb1xx_add_device_flash(void) __init;
-extern void rb1xx_add_device_nand(void) __init;
-extern void rb1xx_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/motorola/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/motorola/Makefile
deleted file mode 100644 (file)
index 239d5a0..0000000
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_PMUGW)               += pmugw.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/motorola/pmugw.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/motorola/pmugw.c
deleted file mode 100644 (file)
index 369892f..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- *  Motorola Powerline MU Gateway board
- *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/admboot.h>
-
-#define PMUGW_CONFIG_OFFSET    0x10000
-#define PMUGW_CONFIG_SIZE      0x1000
-
-static struct mtd_partition pmugw_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "boardcfg",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static u8 pmugw_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static __init void pmugw_setup_mac(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(PMUGW_CONFIG_OFFSET,
-                                  PMUGW_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-void __init pmugw_setup(void)
-{
-       /* setup flash A20 line */
-       gpio_request(ADM5120_GPIO_PIN5, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
-       adm5120_flash0_data.parts = pmugw_partitions;
-
-       adm5120_add_device_uart(1); /* ttyAM0 */
-       adm5120_add_device_uart(0); /* ttyAM1 */
-
-       adm5120_add_device_flash(0);
-
-       pmugw_setup_mac();
-       adm5120_add_device_switch(5, pmugw_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_PMUGW, "PMUGW", "Motorola Powerline MU Gateway",
-            pmugw_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/osbridge/5gxi.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/osbridge/5gxi.c
deleted file mode 100644 (file)
index a5c2c36..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  OSBRiDGE 5GXi/5XLi board support
- *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-static struct mtd_partition osbridge_5gxi_partitions[] = {
-       {
-               .name   = "bootloader",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "boardcfg",
-               .offset = 64*1024,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct gpio_led osbridge_5gxi_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN6, "5gxi:green:user",      NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "5gxi:yellow:lan",      NULL),
-};
-
-static struct adm5120_pci_irq osbridge_5gxi_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 osbridge_5gxi_vlans[6] __initdata = {
-       0x41, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init osbridge_5gxi_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(osbridge_5gxi_partitions);
-       adm5120_flash0_data.parts = osbridge_5gxi_partitions;
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_switch(1, osbridge_5gxi_vlans);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(osbridge_5gxi_gpio_leds),
-                                       osbridge_5gxi_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(osbridge_5gxi_pci_irqs),
-                               osbridge_5gxi_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_5GXI, "5GXi", "OSBRiDGE 5GXi/5XLi board",
-            osbridge_5gxi_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/osbridge/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/osbridge/Makefile
deleted file mode 100644 (file)
index 34946c5..0000000
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_5GXI)        += 5gxi.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/Makefile
deleted file mode 100644 (file)
index 650be40..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-lib-y  += admboot.o
-lib-y  += bootbase.o
-lib-y  += cfe.o
-lib-y  += generic.o
-lib-y  += myloader.o
-lib-y  += routerboot.o
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/admboot.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/admboot.c
deleted file mode 100644 (file)
index b655390..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- *  ADMBoot specific prom routines
- *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/admboot.h>
-#include "prom_read.h"
-
-#define ADMBOOT_MAGIC_MAC_BASE         0x636D676D      /* 'mgmc' */
-#define ADMBOOT_MAGIC_MAC_BASE_BR6104XX 0x31305348     /* 'HS01' */
-
-int __init admboot_get_mac_base(u32 offset, u32 len, u8 *mac)
-{
-       u8 *cfg;
-       int i;
-
-       cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + offset);
-       for (i = 0; i < len; i += 4) {
-               u32 magic;
-
-               magic = prom_read_le32(cfg + i);
-               if (magic == ADMBOOT_MAGIC_MAC_BASE) {
-                       int j;
-
-                       for (j = 0; j < 6; j++)
-                               mac[j] = cfg[i + 4 + j];
-
-                       return 0;
-               }
-               if (magic == ADMBOOT_MAGIC_MAC_BASE_BR6104XX) {
-                       int j;
-
-                       for (j = 0; j < 6; j++)
-                               mac[j] = cfg[i + 7 + j];
-
-                       return 0;
-               }
-       }
-
-       return -ENXIO;
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/bootbase.c
deleted file mode 100644 (file)
index 063281e..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *  ZyXEL's Bootbase specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/zynos.h>
-#include "prom_read.h"
-
-#define ZYNOS_INFO_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN       KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX       (BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static int bootbase_found;
-static struct zynos_board_info *board_info;
-
-struct bootbase_info bootbase_info;
-
-static inline int bootbase_dbgarea_present(u8 *data)
-{
-       u32 t;
-
-       t = prom_read_be32(data+5);
-       if (t != ZYNOS_MAGIC_DBGAREA1)
-               return 0;
-
-       t = prom_read_be32(data+9);
-       if (t != ZYNOS_MAGIC_DBGAREA2)
-               return 0;
-
-       return 1;
-}
-
-static inline u32 bootbase_get_bootext_addr(void)
-{
-       return prom_read_be32(&board_info->bootext_addr);
-}
-
-static inline void bootbase_get_mac(u8 *mac)
-{
-       int     i;
-
-       for (i = 0; i < 6; i++)
-               mac[i] = board_info->mac[i];
-}
-
-static inline u16 bootbase_get_vendor_id(void)
-{
-#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
-       unsigned char vendor[ZYNOS_NAME_LEN];
-       int i;
-
-       for (i = 0; i < ZYNOS_NAME_LEN; i++)
-               vendor[i] = board_info->vendor[i];
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
-               return ZYNOS_VENDOR_ID_ZYXEL;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
-               return ZYNOS_VENDOR_ID_DLINK;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
-               return ZYNOS_VENDOR_ID_LUCENT;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
-               return ZYNOS_VENDOR_ID_NETGEAR;
-
-       return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 bootbase_get_board_id(void)
-{
-       return prom_read_be16(&board_info->board_id);
-}
-
-int __init bootbase_present(void)
-{
-       u32     t;
-
-       if (bootbase_found)
-               goto out;
-
-       /* check presence of the dbgarea */
-       if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
-               goto out;
-
-       board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
-       /* check for a valid BootExt address */
-       t = bootbase_get_bootext_addr();
-       if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
-               goto out;
-
-       bootbase_info.vendor_id = bootbase_get_vendor_id();
-       bootbase_info.board_id = bootbase_get_board_id();
-       bootbase_get_mac(bootbase_info.mac);
-
-       bootbase_found = 1;
-
-out:
-       return bootbase_found;
-}
-
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/cfe.c
deleted file mode 100644 (file)
index 5a343cd..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  Broadcom's CFE specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <prom/cfe.h>
-#include "prom_read.h"
-
-/*
- * CFE based boards
- */
-#define CFE_EPTSEAL    0x43464531 /* CFE1 is the magic number to recognize CFE
-from other bootloaders */
-
-static int cfe_found;
-
-static u32 cfe_handle;
-static u32 cfe_entry;
-static u32 cfe_seal;
-
-int __init cfe_present(void)
-{
-       /*
-        * This method only works, when we are booted directly from the CFE.
-        */
-       u32 a1 = (u32) fw_arg1;
-
-       if (cfe_found)
-               return 1;
-
-       cfe_handle = (u32) fw_arg0;
-       cfe_entry = (u32) fw_arg2;
-       cfe_seal = (u32) fw_arg3;
-
-       /* Check for CFE by finding the CFE magic number */
-       if (cfe_seal != CFE_EPTSEAL)
-               return 0;
-
-       /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
-       if (a1 != 0)
-               return 0;
-
-       /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
-       if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
-               return 0;
-
-       cfe_found = 1;
-       return 1;
-}
-
-char *cfe_getenv(char *envname)
-{
-       if (cfe_found == 0)
-               return NULL;
-
-       return NULL;
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/generic.c
deleted file mode 100644 (file)
index 4d4caa8..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  Generic PROM routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom/generic.h>
-
-static int *_prom_argc;
-static char **_prom_argv;
-static char **_prom_envp;
-
-char *generic_prom_getenv(char *envname)
-{
-       char **env;
-       char *ret;
-
-       ret = NULL;
-       for (env = _prom_envp; *env != NULL; env++) {
-               if (strcmp(envname, *env++) == 0) {
-                       ret = *env;
-                       break;
-               }
-       }
-
-       return ret;
-}
-
-int generic_prom_present(void)
-{
-       _prom_argc = (int *)fw_arg0;
-       _prom_argv = (char **)fw_arg1;
-       _prom_envp = (char **)fw_arg2;
-
-       return 1;
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/myloader.c
deleted file mode 100644 (file)
index 5357db5..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *  Compex's MyLoader specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/myloader.h>
-#include "prom_read.h"
-
-#define SYS_PARAMS_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR      KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static int myloader_found;
-
-struct myloader_info myloader_info;
-
-int __init myloader_present(void)
-{
-       struct mylo_system_params *sysp;
-       struct mylo_board_params *boardp;
-       struct mylo_partition_table *parts;
-       int i;
-
-       if (myloader_found)
-               goto out;
-
-       sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
-       boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
-       parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
-       /* Check for some magic numbers */
-       if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
-          (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
-          (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
-               goto out;
-
-       myloader_info.vid = le32_to_cpu(sysp->vid);
-       myloader_info.did = le32_to_cpu(sysp->did);
-       myloader_info.svid = le32_to_cpu(sysp->svid);
-       myloader_info.sdid = le32_to_cpu(sysp->sdid);
-
-       for (i = 0; i < MYLO_ETHADDR_COUNT; i++) {
-               int j;
-               for (j = 0; j < 6; j++)
-                       myloader_info.macs[i][j] = boardp->addr[i].mac[j];
-       }
-
-       myloader_found = 1;
-
-out:
-       return myloader_found;
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/prom_read.h
deleted file mode 100644 (file)
index 1a6ea11..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  Generic prom definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_PROM_H_
-#define _ADM5120_PROM_H_
-
-/*
- * Helper routines
- */
-static inline u16 prom_read_le16(void *buf)
-{
-       u8 *p = buf;
-
-       return ((u16)p[0] + ((u16)p[1] << 8));
-}
-
-static inline u32 prom_read_le32(void *buf)
-{
-       u8 *p = buf;
-
-       return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
-               ((u32)p[3] << 24));
-}
-
-static inline u16 prom_read_be16(void *buf)
-{
-       u8 *p = buf;
-
-       return (((u16)p[0] << 8) + (u16)p[1]);
-}
-
-static inline u32 prom_read_be32(void *buf)
-{
-       u8 *p = buf;
-
-       return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
-               ((u32)p[3]));
-}
-
-#endif /* _ADM5120_PROM_H_ */
-
-
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/prom/routerboot.c
deleted file mode 100644 (file)
index d9a06d9..0000000
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Mikrotik's RouterBOOT specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/routerboot.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/routerboot.h>
-#include "prom_read.h"
-
-struct rb_hard_settings rb_hs;
-static int rb_found;
-
-static int __init routerboot_load_hs(u8 *buf, u16 buflen)
-{
-       u16 id, len;
-
-       memset(&rb_hs, 0, sizeof(rb_hs));
-
-       if (buflen < 4)
-               return -1;
-
-       if (prom_read_le32(buf) != RB_MAGIC_HARD)
-               return -1;
-
-       /* skip magic value */
-       buf += 4;
-       buflen -= 4;
-
-       while (buflen > 2) {
-               id = prom_read_le16(buf);
-               buf += 2;
-               buflen -= 2;
-               if (id == RB_ID_TERMINATOR || buflen < 2)
-                       break;
-
-               len = prom_read_le16(buf);
-               buf += 2;
-               buflen -= 2;
-
-               if (buflen < len)
-                       break;
-
-               switch (id) {
-               case RB_ID_BIOS_VERSION:
-                       rb_hs.bios_ver = (char *)buf;
-                       break;
-               case RB_ID_BOARD_NAME:
-                       rb_hs.name = (char *)buf;
-                       break;
-               case RB_ID_MEMORY_SIZE:
-                       rb_hs.mem_size = prom_read_le32(buf);
-                       break;
-               case RB_ID_MAC_ADDRESS_COUNT:
-                       rb_hs.mac_count = prom_read_le32(buf);
-                       break;
-               case RB_ID_MAC_ADDRESS_PACK:
-                       if ((len / RB_MAC_SIZE) > 0)
-                               rb_hs.mac_base = buf;
-                       break;
-               }
-
-               buf += len;
-               buflen -= len;
-
-       }
-
-       return 0;
-}
-
-#define RB_BS_OFFS     0x14
-#define RB_OFFS_MAX    (128*1024)
-
-int __init routerboot_present(void)
-{
-       struct rb_bios_settings *bs;
-       u8 *base;
-       u32 off, len;
-
-       if (rb_found)
-               goto out;
-
-       base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
-       bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
-       off = prom_read_le32(&bs->hs_offs);
-       len = prom_read_le32(&bs->hs_size);
-       if (off > RB_OFFS_MAX)
-               goto out;
-
-       if (routerboot_load_hs(base+off, len) != 0)
-               goto out;
-
-       rb_found = 1;
-
-out:
-       return rb_found;
-}
-
-char *routerboot_get_boardname(void)
-{
-       if (rb_found == 0)
-               return NULL;
-
-       return rb_hs.name;
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/Makefile b/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/Makefile
deleted file mode 100644 (file)
index e8325a1..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-y  += p-33x.o
-
-obj-${CONFIG_ADM5120_MACH_P_334WT}     += p-334wt.o
-obj-${CONFIG_ADM5120_MACH_P_335}       += p-335.o
\ No newline at end of file
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-334wt.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-334wt.c
deleted file mode 100644 (file)
index 6cc9aee..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  ZyXEL Prestige P-334WT support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-static struct gpio_led p334wt_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN2, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan3",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan4",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan",          NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L2, "wlan",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L2, "otist",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L2, "hidden",       NULL),
-};
-
-static void __init p334wt_setup(void)
-{
-       p33x_generic_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(p334wt_gpio_leds),
-                                       p334wt_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_P334WT, "P-334WT", "ZyXEL Prestige 334WT",
-            p334wt_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-335.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-335.c
deleted file mode 100644 (file)
index 6ac2b09..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  ZyXEL Prestige P-335/335WT support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-static void __init p335_setup(void)
-{
-       p33x_generic_setup();
-       adm5120_add_device_usb();
-}
-
-MIPS_MACHINE(MACH_ADM5120_P335, "P-335", "ZyXEL Prestige 335/335WT",
-            p335_setup);
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-33x.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-33x.c
deleted file mode 100644 (file)
index 2626cf9..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  ZyXEL Prestige P-33x boards support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-#include <prom/zynos.h>
-
-#define P33X_GPIO_FLASH_A20    ADM5120_GPIO_PIN5
-static struct mtd_partition p33x_partitions[] = {
-       {
-               .name   = "bootbase",
-               .offset = 0,
-               .size   = 16*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "rom",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 16*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "bootext1",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "bootext2",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "trx",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       } , {
-               .name   = "firmware",
-               .offset = 32*1024,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 p33x_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x50, 0x48, 0x44, 0x42, 0x41, 0x00
-};
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(P33X_GPIO_FLASH_A20, 0);
-               break;
-       case 1:
-               gpio_set_value(P33X_GPIO_FLASH_A20, 1);
-               break;
-       }
-}
-
-void __init p33x_generic_setup(void)
-{
-       /* setup data for flash0 device */
-       gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */
-       gpio_direction_output(P33X_GPIO_FLASH_A20, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
-       adm5120_flash0_data.parts = p33x_partitions;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_setup_eth_macs(bootbase_info.mac);
-       adm5120_add_device_switch(6, p33x_vlans);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(p33x_pci_irqs), p33x_pci_irqs);
-}
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-33x.h b/target/linux/adm5120/files-3.14/arch/mips/adm5120/zyxel/p-33x.h
deleted file mode 100644 (file)
index 8a7340c..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  ZyXEL Prestige P-33x boards support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void p33x_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_defs.h
deleted file mode 100644 (file)
index bf220ff..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  ADM5120 SoC definitions
- *
- *  This file defines some constants specific to the ADM5120 SoC
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H
-#define _ASM_MIPS_MACH_ADM5120_DEFS_H
-
-#define ADM5120_SDRAM0_BASE    0x00000000
-#define ADM5120_SDRAM1_BASE    0x01000000
-#define ADM5120_SRAM1_BASE     0x10000000
-#define ADM5120_EXTIO0_BASE    0x10C00000
-#define ADM5120_EXTIO0_SIZE    0x00200000
-#define ADM5120_EXTIO1_BASE    0x10E00000
-#define ADM5120_EXTIO1_SIZE    0x00200000
-#define ADM5120_MPMC_BASE      0x11000000
-#define ADM5120_MPMC_SIZE      0x00200000
-#define ADM5120_USBC_BASE      0x11200000
-#define ADM5120_USBC_SIZE      0x00200000
-#define ADM5120_PCIMEM_BASE    0x11400000
-#define ADM5120_PCIMEM_SIZE    0x00100000
-#define ADM5120_PCIIO_BASE     0x11500000
-#define ADM5120_PCIIO_SIZE     0x000FFFF0
-#define ADM5120_PCICFG_ADDR    0x115FFFF0
-#define ADM5120_PCICFG_DATA    0x115FFFF8
-#define ADM5120_PCICFG_SIZE    0x00000010
-#define ADM5120_SWITCH_BASE    0x12000000
-#define ADM5120_SWITCH_SIZE    0x00200000
-#define ADM5120_INTC_BASE      0x12200000
-#define ADM5120_INTC_SIZE      0x00200000
-#define ADM5120_UART0_BASE     0x12600000
-#define ADM5120_UART1_BASE     0x12800000
-#define ADM5120_UART_SIZE      0x00200000
-#define ADM5120_SRAM0_BASE     0x1FC00000
-
-#define ADM5120_NAND_BASE      ADM5120_SRAM1_BASE
-#define ADM5120_NAND_SIZE      0xB
-
-#define ADM5120_CLK_175                175000000
-#define ADM5120_CLK_200                200000000
-#define ADM5120_CLK_225                225000000
-#define ADM5120_CLK_250                250000000
-
-#define ADM5120_UART_CLOCK     62500000
-
-#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_info.h
deleted file mode 100644 (file)
index 1d34d80..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_INFO_H
-#define _MACH_ADM5120_INFO_H
-
-#include <linux/types.h>
-
-extern unsigned int adm5120_prom_type;
-#define ADM5120_PROM_GENERIC   0
-#define ADM5120_PROM_CFE       1
-#define ADM5120_PROM_MYLOADER  2
-#define ADM5120_PROM_ROUTERBOOT        3
-#define ADM5120_PROM_BOOTBASE  4
-#define ADM5120_PROM_UBOOT     5
-#define ADM5120_PROM_LAST      5
-
-extern unsigned int adm5120_product_code;
-extern unsigned int adm5120_revision;
-extern unsigned int adm5120_nand_boot;
-
-extern unsigned long adm5120_speed;
-#define ADM5120_SPEED_175      175000000
-#define ADM5120_SPEED_200      200000000
-#define ADM5120_SPEED_225      225000000
-#define ADM5120_SPEED_250      250000000
-
-extern unsigned int adm5120_package;
-#define ADM5120_PACKAGE_PQFP   0
-#define ADM5120_PACKAGE_BGA    1
-
-extern unsigned long adm5120_memsize;
-
-enum {
-       MACH_ADM5120_GENERIC = 0,       /* Generic board */
-       MACH_ADM5120_5GXI,              /* OSBRiDGE 5GXi/5XLi */
-       MACH_ADM5120_BR6104K,           /* Edimax BR-6104K */
-       MACH_ADM5120_BR6104KP,          /* Edimax BR-6104KP */
-       MACH_ADM5120_BR61X4WG,          /* Edimax BR-6104Wg/BR-6114WG */
-       MACH_ADM5120_CAS630,            /* Cellvision CAS-630/630W */
-       MACH_ADM5120_CAS670,            /* Cellvision CAS-670/670W */
-       MACH_ADM5120_CAS700,            /* Cellvision CAS-700/700W */
-       MACH_ADM5120_CAS771,            /* Cellvision CAS-771/771W */
-       MACH_ADM5120_CAS790,            /* Cellvision CAS-790 */
-       MACH_ADM5120_CAS861,            /* Cellvision CAS-861/861W */
-       MACH_ADM5120_EASY5120PATA,      /* Infineon EASY 5120P-ATA */
-       MACH_ADM5120_EASY5120RT,        /* Infineon EASY 5120-RT */
-       MACH_ADM5120_EASY5120WVOIP,     /* Infineon EASY 5120-WVoIP */
-       MACH_ADM5120_EASY83000,         /* Infineon EASY-83000 */
-       MACH_ADM5120_ES2108,            /* ZyXEL Ethernet Switch 2108 */
-       MACH_ADM5120_ES2108F,           /* ZyXEL Ethernet Switch 2108-F */
-       MACH_ADM5120_ES2108G,           /* ZyXEL Ethernet Switch 2108-G */
-       MACH_ADM5120_ES2108LC,          /* ZyXEL Ethernet Switch 2108-LC */
-       MACH_ADM5120_ES2108PWR,         /* ZyXEL Ethernet Switch 2108-PWR */
-       MACH_ADM5120_ES2024A,           /* ZyXEL Ethernet Switch 2024A */
-       MACH_ADM5120_ES2024PWR,         /* ZyXEL Ethernet Switch 2024PWR */
-       MACH_ADM5120_HS100,             /* ZyXEL HomeSafe 100/100W */
-       MACH_ADM5120_NFS101U,           /* Cellvision NFS-101U/101WU */
-       MACH_ADM5120_NFS202U,           /* Cellvision NFS-202U/202WU */
-       MACH_ADM5120_NP28G,             /* Compex NP28G */
-       MACH_ADM5120_NP28GHS,           /* Compex NP28G HotSpot */
-       MACH_ADM5120_NP27G,             /* Compex NP27G */
-       MACH_ADM5120_RB_11X,            /* Mikrotik RouterBOARD 111/112 */
-       MACH_ADM5120_RB_133,            /* Mikrotik RouterBOARD 133 */
-       MACH_ADM5120_RB_133C,           /* Mikrotik RouterBOARD 133c */
-       MACH_ADM5120_RB_150,            /* Mikrotik RouterBOARD 150 */
-       MACH_ADM5120_RB_153,            /* Mikrotik RouterBOARD 153 */
-       MACH_ADM5120_RB_192,            /* Mikrotik RouterBOARD 192 */
-       MACH_ADM5120_P334U,             /* ZyXEL Prestige 334U */
-       MACH_ADM5120_P334W,             /* ZyXEL Prestige 334W */
-       MACH_ADM5120_P334WH,            /* ZyXEL Prestige 334WH */
-       MACH_ADM5120_P334WHD,           /* ZyXEL Prestige 334WHD */
-       MACH_ADM5120_P334WT,            /* ZyXEL Prestige 334WT */
-       MACH_ADM5120_P335,              /* ZyXEL Prestige 335/335WT */
-       MACH_ADM5120_P335PLUS,          /* ZyXEL Prestige 335Plus */
-       MACH_ADM5120_P335U,             /* ZyXEL Prestige 335U */
-       MACH_ADM5120_PMUGW,             /* Motorola Powerline MU Gateway */
-       MACH_ADM5120_WP54,              /* Compex WP54G/WP54AG/WPP54G/WPP54AG */
-       MACH_ADM5120_WP54G_WRT,         /* Compex WP54G-WRT */
-       MACH_ADM5120_WP54Gv1C,          /* Compex WP54G version 1C */
-       MACH_ADM5120_EB_214A,           /* Generic EB-214A */
-};
-
-/*
- * TODO:remove adm5120_eth* variables when the switch driver will be
- *     converted into a real platform driver
- */
-extern unsigned int adm5120_eth_num_ports;
-extern unsigned char adm5120_eth_macs[6][6];
-extern unsigned char adm5120_eth_vlans[6];
-
-extern void adm5120_soc_init(void) __init;
-extern void adm5120_mem_init(void) __init;
-extern void adm5120_ndelay(u32 ns);
-
-extern void (*adm5120_board_reset)(void);
-
-extern void adm5120_gpio_init(void) __init;
-extern void adm5120_gpio_csx0_enable(void) __init;
-extern void adm5120_gpio_csx1_enable(void) __init;
-extern void adm5120_gpio_ew_enable(void) __init;
-
-static inline int adm5120_package_pqfp(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_PQFP);
-}
-
-static inline int adm5120_package_bga(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_pci(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_gmii(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-#endif /* _MACH_ADM5120_INFO_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_intc.h
deleted file mode 100644 (file)
index 70dd6bb..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  ADM5120 interrupt controller definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in interrupt controller.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_INTC_H
-#define _MACH_ADM5120_INTC_H
-
-/*
- * INTC register offsets
- */
-#define INTC_REG_IRQ_STATUS            0x00 /* Interrupt status after masking */
-#define INTC_REG_IRQ_RAW_STATUS                0x04 /* Interrupt status before masking */
-#define INTC_REG_IRQ_ENABLE            0x08 /* Used to enable the interrupt sources */
-#define INTC_REG_IRQ_ENABLE_CLEAR      0x0C /* Used to disable the interrupt sources */
-#define INTC_REG_IRQ_DISABLE           INTC_REG_IRQ_ENABLE_CLEAR
-#define INTC_REG_INT_MODE              0x14 /* The interrupt mode of the sources */
-#define INTC_REG_FIQ_STATUS            0x18 /* FIQ status */
-#define INTC_REG_IRQ_TEST_SOURCE       0x1C
-#define INTC_REG_IRQ_SOURCE_SELECT     0x20
-#define INTC_REG_INT_LEVEL             0x24
-
-/*
- * INTC IRQ numbers
- */
-#define INTC_IRQ_TIMER 0       /* built in timer */
-#define INTC_IRQ_UART0 1       /* built-in UART0 */
-#define INTC_IRQ_UART1 2       /* built-in UART1 */
-#define INTC_IRQ_USBC  3       /* USB Host Controller */
-#define INTC_IRQ_GPIO2 4       /* GPIO line 2 */
-#define INTC_IRQ_GPIO4 5       /* GPIO line 4 */
-#define INTC_IRQ_PCI0  6       /* PCI slot 2 */
-#define INTC_IRQ_PCI1  7       /* PCI slot 3 */
-#define INTC_IRQ_PCI2  8       /* PCI slot 4 */
-#define INTC_IRQ_SWITCH        9       /* built-in ethernet switch */
-#define INTC_IRQ_LAST  INTC_IRQ_SWITCH
-#define INTC_IRQ_COUNT 10
-
-/*
- * INTC register bits
- */
-#define INTC_INT_TIMER (1 << INTC_IRQ_TIMER)
-#define INTC_INT_UART0 (1 << INTC_IRQ_UART0)
-#define INTC_INT_UART1 (1 << INTC_IRQ_UART1)
-#define INTC_INT_USBC  (1 << INTC_IRQ_USBC)
-#define INTC_INT_INTX0 (1 << INTC_IRQ_INTX0)
-#define INTC_INT_INTX1 (1 << INTC_IRQ_INTX1)
-#define INTC_INT_PCI0  (1 << INTC_IRQ_PCI0)
-#define INTC_INT_PCI1  (1 << INTC_IRQ_PCI1)
-#define INTC_INT_PCI2  (1 << INTC_IRQ_PCI2)
-#define INTC_INT_SWITCH        (1 << INTC_IRQ_SWITCH)
-#define INTC_INT_ALL   ((1 << INTC_IRQ_COUNT) - 1)
-
-#endif /* _MACH_ADM5120_INTC_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h
deleted file mode 100644 (file)
index c4e9591..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  ADM5120 MPMC (Multiport Memory Controller) register definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_MPMC_H
-#define _MACH_ADM5120_MPMC_H
-
-#define MPMC_READ_REG(r)       __raw_readl( \
-       (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-#define MPMC_WRITE_REG(r, v)   __raw_writel((v), \
-       (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-
-#define MPMC_REG_CTRL  0x0000
-#define MPMC_REG_STATUS        0x0004
-#define MPMC_REG_CONF  0x0008
-#define MPMC_REG_DC    0x0020
-#define MPMC_REG_DR    0x0024
-#define MPMC_REG_DRP   0x0030
-
-#define MPMC_REG_DC0   0x0100
-#define MPMC_REG_DRC0  0x0104
-#define MPMC_REG_DC1   0x0120
-#define MPMC_REG_DRC1  0x0124
-#define MPMC_REG_DC2   0x0140
-#define MPMC_REG_DRC2  0x0144
-#define MPMC_REG_DC3   0x0160
-#define MPMC_REG_DRC3  0x0164
-#define MPMC_REG_SC0   0x0200  /* for F_CS1_N */
-#define MPMC_REG_SC1   0x0220  /* for F_CS0_N */
-#define MPMC_REG_SC2    0x0240
-#define MPMC_REG_WEN2  0x0244
-#define MPMC_REG_OEN2  0x0248
-#define MPMC_REG_RD2   0x024C
-#define MPMC_REG_PG2   0x0250
-#define MPMC_REG_WR2   0x0254
-#define MPMC_REG_TN2   0x0258
-#define MPMC_REG_SC3    0x0260
-
-/* Control register bits */
-#define MPMC_CTRL_AM           (1 << 1)        /* Address Mirror */
-#define MPMC_CTRL_LPM          (1 << 2)        /* Low Power Mode */
-#define MPMC_CTRL_DWB          (1 << 3)        /* Drain Write Buffers */
-
-/* Status register bits */
-#define MPMC_STATUS_BUSY       (1 << 0)        /* Busy */
-#define MPMC_STATUS_WBS                (1 << 1)        /* Write Buffer Status */
-#define MPMC_STATUS_SRA                (1 << 2)        /* Self-Refresh Acknowledge*/
-
-/* Dynamic Control register bits */
-#define MPMC_DC_CE             (1 << 0)
-#define MPMC_DC_DMC            (1 << 1)
-#define MPMC_DC_SRR            (1 << 2)
-#define MPMC_DC_SI_SHIFT       7
-#define MPMC_DC_SI_MASK                (3 << 7)
-#define MPMC_DC_SI_NORMAL      (0 << 7)
-#define MPMC_DC_SI_MODE                (1 << 7)
-#define MPMC_DC_SI_PALL                (2 << 7)
-#define MPMC_DC_SI_NOP         (3 << 7)
-
-#define SRAM_REG_CONF  0x00
-#define SRAM_REG_WWE   0x04
-#define SRAM_REG_WOE   0x08
-#define SRAM_REG_WRD    0x0C
-#define SRAM_REG_WPG    0x10
-#define SRAM_REG_WWR    0x14
-#define SRAM_REG_WTR    0x18
-
-/* Dynamic Configuration register bits */
-#define DC_BE          (1 << 19) /* buffer enable */
-#define DC_RW_SHIFT    28      /* shift for number of rows */
-#define DC_RW_MASK     0x03
-#define DC_NB_SHIFT    26      /* shift for number of banks */
-#define DC_NB_MASK     0x01
-#define DC_CW_SHIFT    22      /* shift for number of columns */
-#define DC_CW_MASK     0x07
-#define DC_DW_SHIFT    7       /* shift for device width */
-#define DC_DW_MASK     0x03
-
-/* Static Configuration register bits */
-#define SC_MW_MASK     0x03    /* memory width mask */
-#define SC_MW_8                0x00    /* 8 bit memory width */
-#define SC_MW_16       0x01    /* 16 bit memory width */
-#define SC_MW_32       0x02    /* 32 bit memory width */
-
-#endif /* _MACH_ADM5120_MPMC_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_nand.h
deleted file mode 100644 (file)
index 1e2f3bd..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- *  ADM5120 NAND interface definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in NAND interface.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  NAND interface routines was based on a driver for Linux 2.6.19+ which
- *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series boards.
- *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_NAND_H
-#define _MACH_ADM5120_NAND_H
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-/* NAND control registers */
-#define NAND_REG_DATA          0x0 /* data register */
-#define NAND_REG_SET_CEn       0x1 /* CE# low */
-#define NAND_REG_CLR_CEn       0x2 /* CE# high */
-#define NAND_REG_CLR_CLE       0x3 /* CLE low */
-#define NAND_REG_SET_CLE       0x4 /* CLE high */
-#define NAND_REG_CLR_ALE       0x5 /* ALE low */
-#define NAND_REG_SET_ALE       0x6 /* ALE high */
-#define NAND_REG_SET_SPn       0x7 /* SP# low (use spare area) */
-#define NAND_REG_CLR_SPn       0x8 /* SP# high (do not use spare area) */
-#define NAND_REG_SET_WPn       0x9 /* WP# low */
-#define NAND_REG_CLR_WPn       0xA /* WP# high */
-#define NAND_REG_STATUS                0xB /* Status register */
-
-#define ADM5120_NAND_STATUS_READY      0x80
-
-#define NAND_READ_REG(r) \
-       readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-#define NAND_WRITE_REG(r, v) \
-       writeb((v), (void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-
-/*-------------------------------------------------------------------------*/
-
-static inline void adm5120_nand_enable(void)
-{
-       SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
-       SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
-}
-
-static inline void adm5120_nand_set_wpn(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
-}
-
-static inline void adm5120_nand_set_spn(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
-}
-
-static inline void adm5120_nand_set_cle(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
-}
-
-static inline void adm5120_nand_set_ale(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
-}
-
-static inline void adm5120_nand_set_cen(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
-}
-
-static inline u8 adm5120_nand_get_status(void)
-{
-       return NAND_READ_REG(NAND_REG_STATUS);
-}
-
-#endif /* _MACH_ADM5120_NAND_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_platform.h
deleted file mode 100644 (file)
index ed73b53..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *  ADM5120 specific platform definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H
-#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-
-struct adm5120_flash_platform_data {
-       void                    (*set_vpp)(struct map_info *, int);
-       void                    (*switch_bank)(unsigned);
-       u32                     window_size;
-       unsigned int            nr_parts;
-       struct mtd_partition    *parts;
-};
-
-struct adm5120_switch_platform_data {
-       /* TODO: not yet implemented */
-};
-
-struct adm5120_pci_irq {
-       u8      slot;
-       u8      func;
-       u8      pin;
-       unsigned irq;
-};
-
-#define PCIIRQ(s, f, p, i) {.slot = (s), .func = (f), .pin  = (p), .irq  = (i)}
-
-#ifdef CONFIG_PCI
-extern void adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map) __init;
-#else
-static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map)
-{
-}
-#endif
-
-extern void adm5120_setup_eth_macs(u8 *mac_base) __init;
-
-extern struct adm5120_flash_platform_data adm5120_flash0_data;
-extern struct adm5120_flash_platform_data adm5120_flash1_data;
-
-extern void adm5120_add_device_flash(unsigned id) __init;
-extern void adm5120_add_device_usb(void) __init;
-extern void adm5120_add_device_uart(unsigned id) __init;
-extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init;
-extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init;
-extern void adm5120_register_gpio_buttons(int id,
-                                         unsigned poll_interval,
-                                         unsigned nbuttons,
-                                         struct gpio_keys_button *buttons);
-
-#define GPIO_LED_DEF(g, n, t, a) {     \
-       .name = (n),                    \
-       .default_trigger = (t),         \
-       .gpio = (g),                    \
-       .active_low = (a)               \
-}
-
-#define GPIO_LED_STD(g, n, t)  GPIO_LED_DEF((g), (n), (t), 0)
-#define GPIO_LED_INV(g, n, t)  GPIO_LED_DEF((g), (n), (t), 1)
-
-extern void adm5120_add_device_gpio_leds(unsigned num_leds,
-                                       struct gpio_led *leds) __init;
-
-#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_switch.h
deleted file mode 100644 (file)
index 91adc5b..0000000
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- *  ADM5120 ethernet switch definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in Ethernet switch.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_SWITCH_H
-#define _MACH_ADM5120_SWITCH_H
-
-#ifndef BIT
-#  define BIT(at)      (1 << (at))
-#endif
-#define BITMASK(len)   (BIT(len)-1)
-
-#define SW_READ_REG(r)         __raw_readl( \
-       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-#define SW_WRITE_REG(r, v)     __raw_writel((v), \
-       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-/* Switch register offsets */
-#define SWITCH_REG_CODE                0x0000
-#define SWITCH_REG_SOFT_RESET  0x0004  /* Soft Reset */
-#define SWITCH_REG_BOOT_DONE   0x0008  /* Boot Done */
-#define SWITCH_REG_SW_RESET    0x000C  /* Switch Reset */
-#define SWITCH_REG_PHY_STATUS  0x0014  /* PHY Status */
-#define SWITCH_REG_MEMCTRL     0x001C  /* Memory Control */
-#define SWITCH_REG_CPUP_CONF   0x0024  /* CPU Port Configuration */
-#define SWITCH_REG_PORT_CONF0  0x0028  /* Port Configuration 0 */
-#define SWITCH_REG_PORT_CONF1  0x002C  /* Port Configuration 1 */
-#define SWITCH_REG_PORT_CONF2  0x0030  /* Port Configuration 2 */
-#define SWITCH_REG_VLAN_G1     0x0040  /* VLAN group 1 */
-#define SWITCH_REG_VLAN_G2     0x0044  /* VLAN group 2 */
-#define SWITCH_REG_SEND_TRIG   0x0048  /* Send Trigger */
-#define SWITCH_REG_MAC_WT0     0x0058  /* MAC Write Address 0 */
-#define SWITCH_REG_MAC_WT1     0x005C  /* MAC Write Address 1 */
-#define SWITCH_REG_BW_CNTL0    0x0060  /* Bandwidth Control 0 */
-#define SWITCH_REG_BW_CNTL1    0x0064  /* Bandwidth Control 1 */
-#define SWITCH_REG_PHY_CNTL0   0x0068  /* PHY Control 0 */
-#define SWITCH_REG_PHY_CNTL1   0x006C  /* PHY Control 1 */
-#define SWITCH_REG_PORT_TH     0x0078  /* Port Threshold */
-#define SWITCH_REG_PHY_CNTL2   0x007C  /* PHY Control 2 */
-#define SWITCH_REG_PHY_CNTL3   0x0080  /* PHY Control 3 */
-#define SWITCH_REG_PRI_CNTL    0x0084  /* Priority Control */
-#define SWITCH_REG_PHY_CNTL4   0x00A0  /* PHY Control 4 */
-#define SWITCH_REG_EMPTY_CNT   0x00A4  /* Empty Count */
-#define SWITCH_REG_PORT_CNTLS  0x00A8  /* Port Control Select */
-#define SWITCH_REG_PORT_CNTL   0x00AC  /* Port Control */
-#define SWITCH_REG_INT_STATUS  0x00B0  /* Interrupt Status */
-#define SWITCH_REG_INT_MASK    0x00B4  /* Interrupt Mask */
-#define SWITCH_REG_GPIO_CONF0  0x00B8  /* GPIO Configuration 0 */
-#define SWITCH_REG_GPIO_CONF2  0x00BC  /* GPIO Configuration 1 */
-#define SWITCH_REG_WDOG0       0x00C0  /* Watchdog 0 */
-#define SWITCH_REG_WDOG1       0x00C4  /* Watchdog 1 */
-
-#define SWITCH_REG_SHDA                0x00D0  /* Send High Descriptors Address */
-#define SWITCH_REG_SLDA                0x00D4  /* Send Low Descriptors Address */
-#define SWITCH_REG_RHDA                0x00D8  /* Receive High Descriptor Address */
-#define SWITCH_REG_RLDA                0x00DC  /* Receive Low Descriptor Address */
-#define SWITCH_REG_SHWA                0x00E0  /* Send High Working Address */
-#define SWITCH_REG_SLWA                0x00E4  /* Send Low Working Address */
-#define SWITCH_REG_RHWA                0x00E8  /* Receive High Working Address */
-#define SWITCH_REG_RLWA                0x00EC  /* Receive Low Working Address */
-
-#define SWITCH_REG_TIMER_INT   0x00F0  /* Timer */
-#define SWITCH_REG_TIMER       0x00F4  /* Timer Interrupt */
-
-#define SWITCH_REG_PORT0_LED   0x0100
-#define SWITCH_REG_PORT1_LED   0x0104
-#define SWITCH_REG_PORT2_LED   0x0108
-#define SWITCH_REG_PORT3_LED   0x010C
-#define SWITCH_REG_PORT4_LED   0x0110
-
-/* CODE register bits */
-#define CODE_PC_MASK           BITMASK(16)     /* Product Code */
-#define CODE_REV_SHIFT         16
-#define CODE_REV_MASK          BITMASK(4)      /* Product Revision */
-#define CODE_CLKS_SHIFT                20
-#define CODE_CLKS_MASK         BITMASK(2)      /* Clock Speed */
-#define CODE_CLKS_175          0               /* 175 MHz */
-#define CODE_CLKS_200          1               /* 200 MHz */
-#define CODE_CLKS_225          2               /* 225 MHz */
-#define CODE_CLKS_250          3               /* 250 MHz */
-#define CODE_NAB               BIT(24)         /* NAND boot */
-#define CODE_PK_MASK           BITMASK(1)      /* Package type */
-#define CODE_PK_SHIFT          29
-#define CODE_PK_BGA            0               /* BGA package */
-#define CODE_PK_PQFP           1               /* PQFP package */
-
-/* MEMCTRL register bits */
-#define MEMCTRL_SDRS_MASK      BITMASK(3)      /* SDRAM bank size */
-#define MEMCTRL_SDRS_4M                0x01
-#define MEMCTRL_SDRS_8M                0x02
-#define MEMCTRL_SDRS_16M       0x03
-#define MEMCTRL_SDRS_64M       0x04
-#define MEMCTRL_SDRS_128M      0x05
-#define MEMCTRL_SDR1_ENABLE    BIT(5)          /* enable SDRAM bank 1 */
-
-#define MEMCTRL_SRS0_SHIFT     8               /* shift for SRAM0 size */
-#define MEMCTRL_SRS1_SHIFT     16              /* shift for SRAM1 size */
-#define MEMCTRL_SRS_MASK       BITMASK(3)      /* SRAM size mask */
-#define MEMCTRL_SRS_DISABLED   0x00            /* Disabled */
-#define MEMCTRL_SRS_512K       0x01            /* 512KB*/
-#define MEMCTRL_SRS_1M         0x02            /* 1MB */
-#define MEMCTRL_SRS_2M         0x03            /* 2MB */
-#define MEMCTRL_SRS_4M         0x04            /* 4MB */
-
-/* Port bits used in various registers */
-#define SWITCH_PORT_PHY0       BIT(0)
-#define SWITCH_PORT_PHY1       BIT(1)
-#define SWITCH_PORT_PHY2       BIT(2)
-#define SWITCH_PORT_PHY3       BIT(3)
-#define SWITCH_PORT_PHY4       BIT(4)
-#define SWITCH_PORT_MII                BIT(5)
-#define SWITCH_PORT_CPU                BIT(6)
-
-/* Port bit shorthands */
-#define SWITCH_PORTS_PHY       0x1F    /* phy ports */
-#define SWITCH_PORTS_NOCPU     0x3F    /* physical ports */
-#define SWITCH_PORTS_ALL       0x7F    /* all ports */
-
-/* CPUP_CONF register bits */
-#define CPUP_CONF_DCPUP                BIT(0)  /* Disable CPU port */
-#define CPUP_CONF_CRCP         BIT(1)  /* CRC padding from CPU */
-#define CPUP_CONF_BTM          BIT(2)  /* Bridge Testing Mode */
-#define CPUP_CONF_DUNP_SHIFT   9       /* Disable Unknown Packets for portX */
-#define CPUP_CONF_DMCP_SHIFT   16      /* Disable Mcast Packets form portX */
-#define CPUP_CONF_DBCP_SHIFT   24      /* Disable Bcast Packets form portX */
-
-/* PORT_CONF0 register bits */
-#define PORT_CONF0_DP_SHIFT    0       /* Disable Port */
-#define PORT_CONF0_EMCP_SHIFT  8       /* Enable All MC Packets */
-#define PORT_CONF0_BP_SHIFT    16      /* Enable Back Pressure */
-
-/* PORT_CONF1 register bits */
-#define PORT_CONF1_DISL_SHIFT  0       /* Disable Learning */
-#define PORT_CONF1_BS_SHIFT    6       /* Blocking State */
-#define PORT_CONF1_BM_SHIFT    12      /* Blocking Mode */
-
-/* SEND_TRIG register bits */
-#define SEND_TRIG_STL          BIT(0)  /* Send Trigger Low */
-#define SEND_TRIG_STH          BIT(1)  /* Send Trigger High */
-
-/* MAC_WT0 register bits */
-#define MAC_WT0_MAWC           BIT(0)  /* MAC address write command */
-#define MAC_WT0_MWD_SHIFT      1
-#define MAC_WT0_MWD            BIT(1)  /* MAC write done */
-#define MAC_WT0_WFB            BIT(2)  /* Write Filter Bit */
-#define MAC_WT0_WVN_SHIFT      3       /* Write Vlan Number shift */
-#define MAC_WT0_WVE            BIT(6)  /* Write VLAN enable */
-#define MAC_WT0_WPMN_SHIFT     7
-#define MAC_WT0_WAF_SHIFT      13      /* Write Age Field shift */
-#define MAC_WT0_WAF_EMPTY      0
-#define MAC_WT0_WAF_STATIC     7       /* age: static */
-#define MAC_WT0_MAC0_SHIFT     16
-#define MAC_WT0_MAC1_SHIFT     24
-
-/* MAC_WT1 register bits */
-#define MAC_WT1_MAC2_SHIFT     0
-#define MAC_WT1_MAC3_SHIFT     8
-#define MAC_WT1_MAC4_SHIFT     16
-#define MAC_WT1_MAC5_SHIFT     24
-
-/* BW_CNTL0/BW_CNTL1 register bits */
-#define BW_CNTL_DISABLE                0x00
-#define BW_CNTL_64K            0x01
-#define BW_CNTL_128K           0x02
-#define BW_CNTL_256K           0x03
-#define BW_CNTL_512K           0x04
-#define BW_CNTL_1M             0x05
-#define BW_CNTL_4M             0x06
-#define BW_CNTL_10M            0x07
-
-#define P4TBC_SHIFT            0
-#define P4RBC_SHIFT            4
-#define P5TBC_SHIFT            8
-#define P5RBC_SHIFT            12
-
-#define BW_CNTL1_NAND_ENABLE   0x100
-
-/* PHY_CNTL0 register bits */
-#define PHY_CNTL0_PHYA_MASK    BITMASK(5)
-#define PHY_CNTL0_PHYR_MASK    BITMASK(5)
-#define PHY_CNTL0_PHYR_SHIFT   8
-#define PHY_CNTL0_WC           BIT(13)         /* Write Command */
-#define PHY_CNTL0_RC           BIT(14)         /* Read Command */
-#define PHY_CNTL0_WTD_MASK     BIT(16)         /* Read Command */
-#define PHY_CNTL0_WTD_SHIFT    16
-
-/* PHY_CNTL1 register bits */
-#define PHY_CNTL1_WOD          BIT(0)          /* Write Operation Done */
-#define PHY_CNTL1_ROD          BIT(1)          /* Read Operation Done */
-#define PHY_CNTL1_RD_MASK      BITMASK(16)
-#define PHY_CNTL1_RD_SHIFT     16
-
-/* PHY_CNTL2 register bits */
-#define PHY_CNTL2_ANE_SHIFT    0       /* Auto Negotiation Enable */
-#define PHY_CNTL2_SC_SHIFT     5       /* Speed Control */
-#define PHY_CNTL2_DC_SHIFT     10      /* Duplex Control */
-#define PHY_CNTL2_FNCV_SHIFT   15      /* Recommended FC Value */
-#define PHY_CNTL2_PHYR_SHIFT   20      /* PHY reset */
-#define PHY_CNTL2_AMDIX_SHIFT  25      /* Auto MDIX enable */
-/* PHY_CNTL2_RMAE is bad in datasheet */
-#define PHY_CNTL2_RMAE         BIT(31) /* Recommended MCC Average enable */
-
-/* PHY_CNTL3 register bits */
-#define PHY_CNTL3_RNT          BIT(10) /* Recommend Normal Threshold */
-
-/* PORT_TH register bits */
-#define PORT_TH_PPT_MASK       BITMASK(8)      /* Per Port Threshold */
-#define PORT_TH_CPUT_SHIFT     8               /* CPU Port Buffer Threshold */
-#define PORT_TH_CPUT_MASK      BITMASK(8)
-#define PORT_TH_CPUHT_SHIFT    16              /* CPU Hold Threshold */
-#define PORT_TH_CPUHT_MASK     BITMASK(8)
-#define PORT_TH_CPURT_SHIFT    24              /* CPU Release Threshold */
-#define PORT_TH_CPURT_MASK     BITMASK(8)
-
-/* EMPTY_CNT register bits */
-#define EMPTY_CNT_EBGB_MASK    BITMASK(9) /* Empty Blocks in the Global Buffer */
-
-/* GPIO_CONF0 register bits */
-#define GPIO_CONF0_MASK                BITMASK(8)
-#define GPIO_CONF0_IM_SHIFT    0
-#define GPIO_CONF0_IV_SHIFT    8
-#define GPIO_CONF0_OE_SHIFT    16
-#define GPIO_CONF0_OV_SHIFT    24
-#define GPIO_CONF0_IM_MASK     (0xFF << GPIO_CONF0_IM_SHIFT)
-#define GPIO_CONF0_IV_MASK     (0xFF << GPIO_CONF0_IV_SHIFT)
-#define GPIO_CONF0_OE_MASK     (0xFF << GPIO_CONF0_OE_SHIFT)
-#define GPIO_CONF0_OV_MASK     (0xFF << GPIO_CONF0_OV_SHIFT)
-
-/* GPIO_CONF2 register bits */
-#define GPIO_CONF2_CSX0                BIT(4)  /* enable CSX0:INTX0 on GPIO 1:2 */
-#define GPIO_CONF2_CSX1                BIT(5)  /* enable CSX1:INTX1 on GPIO 3:4 */
-#define GPIO_CONF2_EW          BIT(6)  /* enable wait state pin for CSX0/1 */
-
-/* INT_STATUS/INT_MASK register bits */
-#define SWITCH_INT_SHD         BIT(0)  /* Send High Done */
-#define SWITCH_INT_SLD         BIT(1)  /* Send Low Done */
-#define SWITCH_INT_RHD         BIT(2)  /* Receive High Done */
-#define SWITCH_INT_RLD         BIT(3)  /* Receive Low Done */
-#define SWITCH_INT_HDF         BIT(4)  /* High Descriptor Full */
-#define SWITCH_INT_LDF         BIT(5)  /* Low Descriptor Full */
-#define SWITCH_INT_P0QF                BIT(6)  /* Port0 Queue Full */
-#define SWITCH_INT_P1QF                BIT(7)  /* Port1 Queue Full */
-#define SWITCH_INT_P2QF                BIT(8)  /* Port2 Queue Full */
-#define SWITCH_INT_P3QF                BIT(9)  /* Port3 Queue Full */
-#define SWITCH_INT_P4QF                BIT(10) /* Port4 Queue Full */
-#define SWITCH_INT_P5QF                BIT(11) /* Port5 Queue Full */
-#define SWITCH_INT_CPQF                BIT(13) /* CPU Queue Full */
-#define SWITCH_INT_GQF         BIT(14) /* Global Queue Full */
-#define SWITCH_INT_MD          BIT(15) /* Must Drop */
-#define SWITCH_INT_BCS         BIT(16) /* BC Storm */
-#define SWITCH_INT_PSC         BIT(18) /* Port Status Change */
-#define SWITCH_INT_ID          BIT(19) /* Intruder Detected */
-#define SWITCH_INT_W0TE                BIT(20) /* Watchdog 0 Timer Expired */
-#define SWITCH_INT_W1TE                BIT(21) /* Watchdog 1 Timer Expired */
-#define SWITCH_INT_RDE         BIT(22) /* Receive Descriptor Error */
-#define SWITCH_INT_SDE         BIT(23) /* Send Descriptor Error */
-#define SWITCH_INT_CPUH                BIT(24) /* CPU Hold */
-
-/* TIMER_INT register bits */
-#define TIMER_INT_TOS          BIT(0)  /* time-out status */
-#define TIMER_INT_TOM          BIT(16) /* mask time-out interrupt */
-
-/* TIMER register bits */
-#define TIMER_PERIOD_MASK      BITMASK(16)     /* mask for timer period */
-#define TIMER_PERIOD_DEFAULT   0xFFFF          /* default timer period */
-#define TIMER_TE               BIT(16) /* timer enable bit */
-
-/* PORTx_LED register bits */
-#define LED_MODE_MASK          BITMASK(4)
-#define LED_MODE_INPUT         0
-#define LED_MODE_FLASH         1
-#define LED_MODE_OUT_HIGH      2
-#define LED_MODE_OUT_LOW       3
-#define LED_MODE_LINK          4
-#define LED_MODE_SPEED         5
-#define LED_MODE_DUPLEX                6
-#define LED_MODE_ACT           7
-#define LED_MODE_COLL          8
-#define LED_MODE_LINK_ACT      9
-#define LED_MODE_DUPLEX_COLL   10
-#define LED_MODE_10M_ACT       11
-#define LED_MODE_100M_ACT      12
-#define LED0_MODE_SHIFT                0       /* LED0 mode shift */
-#define LED1_MODE_SHIFT                4       /* LED1 mode shift */
-#define LED2_MODE_SHIFT                8       /* LED2 mode shift */
-#define LED0_IV_SHIFT          12      /* LED0 input value shift */
-#define LED1_IV_SHIFT          13      /* LED1 input value shift */
-#define LED2_IV_SHIFT          14      /* LED2 input value shift */
-
-#endif /* _MACH_ADM5120_SWITCH_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/adm5120_uart.h
deleted file mode 100644 (file)
index 81d3067..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  ADM5120 UART definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in UARTs.
- *
- *  Copyright (C) 2007 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_UART_H
-#define _MACH_ADM5120_UART_H
-
-#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
-
-#define UART_REG_DATA  0x00
-#define UART_REG_RSR   0x04
-#define UART_REG_ECR   UART_REG_RSR
-#define UART_REG_LCRH  0x08
-#define UART_REG_LCRM  0x0C
-#define UART_REG_LCRL  0x10
-#define UART_REG_CTRL  0x14
-#define UART_REG_FLAG  0x18
-
-/* Receive Status Register bits */
-#define UART_RSR_FE    (1 << 0)
-#define UART_RSR_PE    (1 << 1)
-#define UART_RSR_BE    (1 << 2)
-#define UART_RSR_OE    (1 << 3)
-#define UART_RSR_ERR   (UART_RSR_FE | UART_RSR_PE | UART_RSR_BE)
-
-#define UART_ECR_ALL   0xFF
-
-/* Line Control High register bits */
-#define UART_LCRH_BRK  (1 << 0) /* send break */
-#define UART_LCRH_PEN  (1 << 1) /* parity enable */
-#define UART_LCRH_EPS  (1 << 2) /* even parity select */
-#define UART_LCRH_STP1 (0 << 3) /* one stop bits select */
-#define UART_LCRH_STP2 (1 << 3) /* two stop bits select */
-#define UART_LCRH_FEN  (1 << 4) /* FIFO enable */
-
-#define UART_LCRH_WLEN5        (0 << 5)
-#define UART_LCRH_WLEN6        (1 << 5)
-#define UART_LCRH_WLEN7        (2 << 5)
-#define UART_LCRH_WLEN8        (3 << 5)
-
-/* Control register bits */
-#define UART_CTRL_EN   (1 << 0)
-
-/* Flag register bits */
-#define UART_FLAG_CTS  (1 << 0)
-#define UART_FLAG_DSR  (1 << 1)
-#define UART_FLAG_DCD  (1 << 2)
-#define UART_FLAG_BUSY (1 << 3)
-#define UART_FLAG_RXFE (1 << 4)
-#define UART_FLAG_TXFF (1 << 5)
-#define UART_FLAG_RXFF (1 << 6)
-#define UART_FLAG_TXFE (1 << 7)
-
-#endif /* _MACH_ADM5120_UART_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/asm/sizes.h
deleted file mode 100644 (file)
index 503843d..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/*  Size definitions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h                       1
-
-/* handy sizes */
-#define SZ_16                          0x00000010
-#define SZ_256                         0x00000100
-#define SZ_512                         0x00000200
-
-#define SZ_1K                           0x00000400
-#define SZ_4K                           0x00001000
-#define SZ_8K                           0x00002000
-#define SZ_16K                          0x00004000
-#define SZ_64K                          0x00010000
-#define SZ_128K                         0x00020000
-#define SZ_256K                         0x00040000
-#define SZ_512K                         0x00080000
-
-#define SZ_1M                           0x00100000
-#define SZ_2M                           0x00200000
-#define SZ_4M                           0x00400000
-#define SZ_8M                           0x00800000
-#define SZ_16M                          0x01000000
-#define SZ_32M                          0x02000000
-#define SZ_64M                          0x04000000
-#define SZ_128M                         0x08000000
-#define SZ_256M                         0x10000000
-#define SZ_512M                         0x20000000
-
-#define SZ_1G                           0x40000000
-#define SZ_2G                           0x80000000
-
-#endif
-
-/*         END */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h
deleted file mode 100644 (file)
index c6310cc..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  ADM5120 specific CPU feature overrides
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was derived from: include/asm-mips/cpu-features.h
- *     Copyright (C) 2003, 2004 Ralf Baechle
- *     Copyright (C) 2004 Maciej W. Rozycki
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-
-/*
- * The ADM5120 SOC has a built-in MIPS 4Kc core.
- */
-#define cpu_has_tlb                    1
-#define cpu_has_4kex                   1
-#define cpu_has_3k_cache               0
-#define cpu_has_4k_cache               1
-#define cpu_has_tx39_cache             0
-#define cpu_has_sb1_cache              0
-#define cpu_has_fpu                    0
-#define cpu_has_32fpr                  0
-#define cpu_has_counter                        1
-#define cpu_has_watch                  1
-#define cpu_has_divec                  1
-/* #define cpu_has_vce                 ? */
-/* #define cpu_has_cache_cdex_p                ? */
-/* #define cpu_has_cache_cdex_s                ? */
-#define cpu_has_prefetch               1
-/* #define cpu_has_mcheck              ? */
-#define cpu_has_ejtag                  1
-#define cpu_has_llsc                   1
-
-#define cpu_has_mips16                 0
-#define cpu_has_mdmx                   0
-#define cpu_has_mips3d                 0
-#define cpu_has_smartmips              0
-
-/* #define cpu_has_vtag_icache         ? */
-/* #define cpu_has_dc_aliases          ? */
-/* #define cpu_has_ic_fills_f_dc       ? */
-/* #define cpu_has_pindexed_dcache     ? */
-
-/* #define cpu_icache_snoops_remote_store      ? */
-
-#define cpu_has_mips32r1               1
-#define cpu_has_mips32r2               0
-#define cpu_has_mips64r1               0
-#define cpu_has_mips64r2               0
-
-#define cpu_has_dsp                    0
-#define cpu_has_mipsmt                 0
-
-/* #define cpu_has_nofpuex             ? */
-#define cpu_has_64bits                 0
-#define cpu_has_64bit_zero_reg         0
-#define cpu_has_64bit_gp_regs          0
-#define cpu_has_64bit_addresses                0
-
-/* #define cpu_has_inclusive_pcaches   ? */
-
-#define cpu_dcache_line_size()         16
-#define cpu_icache_line_size()         16
-
-#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/gpio.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/gpio.h
deleted file mode 100644 (file)
index 7ba7efc..0000000
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  ADM5120 GPIO wrappers for arch-neutral GPIO calls
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H
-#define _ASM_MIPS_MACH_ADM5120_GPIO_H
-
-#define ARCH_NR_GPIOS  64
-
-#include <asm-generic/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define ADM5120_GPIO_PIN0      0
-#define ADM5120_GPIO_PIN1      1
-#define ADM5120_GPIO_PIN2      2
-#define ADM5120_GPIO_PIN3      3
-#define ADM5120_GPIO_PIN4      4
-#define ADM5120_GPIO_PIN5      5
-#define ADM5120_GPIO_PIN6      6
-#define ADM5120_GPIO_PIN7      7
-#define ADM5120_GPIO_P0L0      8
-#define ADM5120_GPIO_P0L1      9
-#define ADM5120_GPIO_P0L2      10
-#define ADM5120_GPIO_P1L0      11
-#define ADM5120_GPIO_P1L1      12
-#define ADM5120_GPIO_P1L2      13
-#define ADM5120_GPIO_P2L0      14
-#define ADM5120_GPIO_P2L1      15
-#define ADM5120_GPIO_P2L2      16
-#define ADM5120_GPIO_P3L0      17
-#define ADM5120_GPIO_P3L1      18
-#define ADM5120_GPIO_P3L2      19
-#define ADM5120_GPIO_P4L0      20
-#define ADM5120_GPIO_P4L1      21
-#define ADM5120_GPIO_P4L2      22
-#define ADM5120_GPIO_MAX       22
-#define ADM5120_GPIO_COUNT     ADM5120_GPIO_MAX+1
-
-#define ADM5120_GPIO_LOW       0
-#define ADM5120_GPIO_HIGH      1
-
-#define ADM5120_GPIO_SWITCH    0x10
-#define ADM5120_GPIO_FLASH     (ADM5120_GPIO_SWITCH | LED_MODE_FLASH)
-#define ADM5120_GPIO_LINK      (ADM5120_GPIO_SWITCH | LED_MODE_LINK)
-#define ADM5120_GPIO_SPEED     (ADM5120_GPIO_SWITCH | LED_MODE_SPEED)
-#define ADM5120_GPIO_DUPLEX    (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX)
-#define ADM5120_GPIO_ACT       (ADM5120_GPIO_SWITCH | LED_MODE_ACT)
-#define ADM5120_GPIO_COLL      (ADM5120_GPIO_SWITCH | LED_MODE_COLL)
-#define ADM5120_GPIO_LINK_ACT  (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT)
-#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL)
-#define ADM5120_GPIO_10M_ACT   (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT)
-#define ADM5120_GPIO_100M_ACT  (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT)
-
-extern int  __adm5120_gpio0_get_value(unsigned gpio);
-extern void __adm5120_gpio0_set_value(unsigned gpio, int value);
-extern int  __adm5120_gpio1_get_value(unsigned gpio);
-extern void __adm5120_gpio1_set_value(unsigned gpio, int value);
-extern int  adm5120_gpio_to_irq(unsigned gpio);
-extern int  adm5120_irq_to_gpio(unsigned irq);
-
-static inline int gpio_get_value(unsigned gpio)
-{
-       int ret;
-
-       switch (gpio) {
-       case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
-               ret = __adm5120_gpio0_get_value(gpio);
-               break;
-       case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
-               ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0);
-               break;
-       default:
-               ret = __gpio_get_value(gpio);
-               break;
-       }
-
-       return ret;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-       switch (gpio) {
-       case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
-               __adm5120_gpio0_set_value(gpio, value);
-               break;
-       case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
-               __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value);
-               break;
-       default:
-               __gpio_set_value(gpio, value);
-               break;
-       }
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-       return adm5120_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-       return adm5120_irq_to_gpio(irq);
-}
-
-#define gpio_cansleep  __gpio_cansleep
-
-#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/irq.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/irq.h
deleted file mode 100644 (file)
index b0350c8..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  ADM5120 specific IRQ numbers
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H
-#define _ASM_MIPS_MACH_ADM5120_IRQ_H
-
-#define MIPS_CPU_IRQ_BASE      0
-#define NR_IRQS                        24
-
-#include_next <irq.h>
-
-#include <asm/mach-adm5120/adm5120_intc.h>
-
-#define NO_IRQ                 (-1)
-
-#define MIPS_CPU_IRQ_COUNT     8
-#define MIPS_CPU_IRQ(x)                (MIPS_CPU_IRQ_BASE + (x))
-
-#define ADM5120_INTC_IRQ_BASE  (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT)
-#define ADM5120_INTC_IRQ(x)    (ADM5120_INTC_IRQ_BASE + (x))
-
-#define ADM5120_IRQ_INTC       MIPS_CPU_IRQ(2)
-#define ADM5120_IRQ_COUNTER    MIPS_CPU_IRQ(7)
-
-#define ADM5120_IRQ_TIMER      ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
-#define ADM5120_IRQ_UART0      ADM5120_INTC_IRQ(INTC_IRQ_UART0)
-#define ADM5120_IRQ_UART1      ADM5120_INTC_IRQ(INTC_IRQ_UART1)
-#define ADM5120_IRQ_USBC       ADM5120_INTC_IRQ(INTC_IRQ_USBC)
-#define ADM5120_IRQ_GPIO2      ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
-#define ADM5120_IRQ_GPIO4      ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
-#define ADM5120_IRQ_PCI0       ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
-#define ADM5120_IRQ_PCI1       ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
-#define ADM5120_IRQ_PCI2       ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
-#define ADM5120_IRQ_SWITCH     ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
-
-#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/admboot.h
deleted file mode 100644 (file)
index fa42bf7..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  ADMBoot specific definitions
- *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADMBOOT_H
-#define _ADMBOOT_H
-
-extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init;
-
-#endif /* _ADMBOOT_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/cfe.h
deleted file mode 100644 (file)
index 0cb3eee..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Broadcom's CFE definitions
- *
- *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_CFE_H_
-#define _PROM_CFE_H_
-
-extern int cfe_present(void) __init;
-extern char *cfe_getenv(char *);
-
-#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/generic.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/generic.h
deleted file mode 100644 (file)
index 778df24..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Generic prom definitions
- *
- *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_GENERIC_H_
-#define _PROM_GENERIC_H_
-
-extern int generic_prom_present(void) __init;
-extern char *generic_prom_getenv(char *);
-
-#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/myloader.h
deleted file mode 100644 (file)
index ea8db81..0000000
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- *  Compex's MyLoader specific definitions
- *
- *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MYLOADER_H_
-#define _MYLOADER_H_
-
-/*
- * Firmware file format:
- *
- *     <header>
- *     [<block descriptor 0>]
- *     ...
- *     [<block descriptor n>]
- *     <null block descriptor>
- *     [<block data 0>]
- *     ...
- *     [<block data n>]
- *
- *
- */
-
-/* Myloader specific magic numbers */
-#define MYLO_MAGIC_FIRMWARE    0x4C594D00
-#define MYLO_MAGIC_20021103    0x20021103
-#define MYLO_MAGIC_20021107    0x20021107
-
-#define MYLO_MAGIC_SYS_PARAMS  MYLO_MAGIC_20021107
-#define MYLO_MAGIC_PARTITIONS  MYLO_MAGIC_20021103
-#define MYLO_MAGIC_BOARD_PARAMS        MYLO_MAGIC_20021103
-
-/*
- * Addresses of the data structures provided by MyLoader
- */
-#define MYLO_MIPS_SYS_PARAMS   0x80000800      /* System Parameters */
-#define MYLO_MIPS_BOARD_PARAMS 0x80000A00      /* Board Parameters */
-#define MYLO_MIPS_PARTITIONS   0x80000C00      /* Partition Table */
-#define MYLO_MIPS_BOOT_PARAMS  0x80000E00      /* Boot Parameters */
-
-/* Vendor ID's (seems to be same as the PCI vendor ID's) */
-#define VENID_COMPEX           0x11F6
-
-/* Devices based on the ADM5120 */
-#define DEVID_COMPEX_NP27G     0x0078
-#define DEVID_COMPEX_NP28G     0x044C
-#define DEVID_COMPEX_NP28GHS   0x044E
-#define DEVID_COMPEX_WP54Gv1C  0x0514
-#define DEVID_COMPEX_WP54G     0x0515
-#define DEVID_COMPEX_WP54AG    0x0546
-#define DEVID_COMPEX_WPP54AG   0x0550
-#define DEVID_COMPEX_WPP54G    0x0555
-
-/* Devices based on the IXP422 */
-#define DEVID_COMPEX_WP18      0x047E
-#define DEVID_COMPEX_NP18A     0x0489
-
-/* Other devices */
-#define DEVID_COMPEX_NP26G8M   0x03E8
-#define DEVID_COMPEX_NP26G16M  0x03E9
-
-struct mylo_fw_header {
-       uint32_t        magic;  /* must be MYLO_MAGIC_FIRMWARE */
-       uint32_t        crc;    /* CRC of the whole firmware */
-       uint32_t        res0;   /* unknown/unused */
-       uint32_t        res1;   /* unknown/unused */
-       uint16_t        vid;    /* vendor ID */
-       uint16_t        did;    /* device ID */
-       uint16_t        svid;   /* sub vendor ID */
-       uint16_t        sdid;   /* sub device ID */
-       uint32_t        rev;    /* device revision */
-       uint32_t        fwhi;   /* FIXME: firmware version high? */
-       uint32_t        fwlo;   /* FIXME: firmware version low? */
-       uint32_t        flags;  /* firmware flags */
-};
-
-#define FW_FLAG_BOARD_PARAMS_WP        0x01 /* board parameters are write protected */
-#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
-
-struct mylo_fw_blockdesc {
-       uint32_t        type;   /* block type */
-       uint32_t        addr;   /* relative address to flash start */
-       uint32_t        dlen;   /* size of block data in bytes */
-       uint32_t        blen;   /* total size of block in bytes */
-};
-
-#define FW_DESC_TYPE_UNUSED    0
-#define FW_DESC_TYPE_USED      1
-
-struct mylo_partition {
-       uint16_t        flags;  /* partition flags */
-       uint16_t        type;   /* type of the partition */
-       uint32_t        addr;   /* relative address of the partition from the
-                                  flash start */
-       uint32_t        size;   /* size of the partition in bytes */
-       uint32_t        param;  /* if this is the active partition, the
-                                  MyLoader load code to this address */
-};
-
-#define PARTITION_FLAG_ACTIVE  0x8000 /* this is the active partition,
-                                       * MyLoader loads firmware from here */
-#define PARTITION_FLAG_ISRAM   0x2000 /* FIXME: this is a RAM partition? */
-#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
-#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
-                                       * before decompression */
-#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
-
-#define PARTITION_TYPE_FREE    0
-#define PARTITION_TYPE_USED    1
-
-#define MYLO_MAX_PARTITIONS    8       /* maximum number of partitions in the
-                                          partition table */
-
-struct mylo_partition_table {
-       uint32_t        magic;  /* must be MYLO_MAGIC_PARTITIONS */
-       uint32_t        res0;   /* unknown/unused */
-       uint32_t        res1;   /* unknown/unused */
-       uint32_t        res2;   /* unknown/unused */
-       struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
-};
-
-struct mylo_partition_header {
-       uint32_t        len;    /* length of the partition data */
-       uint32_t        crc;    /* CRC value of the partition data */
-};
-
-struct mylo_system_params {
-       uint32_t        magic;  /* must be MYLO_MAGIC_SYS_PARAMS */
-       uint32_t        res0;
-       uint32_t        res1;
-       uint32_t        mylo_ver;
-       uint16_t        vid;    /* Vendor ID */
-       uint16_t        did;    /* Device ID */
-       uint16_t        svid;   /* Sub Vendor ID */
-       uint16_t        sdid;   /* Sub Device ID */
-       uint32_t        rev;    /* device revision */
-       uint32_t        fwhi;
-       uint32_t        fwlo;
-       uint32_t        tftp_addr;
-       uint32_t        prog_start;
-       uint32_t        flash_size;     /* Size of boot FLASH in bytes */
-       uint32_t        dram_size;      /* Size of onboard RAM in bytes */
-};
-
-
-struct mylo_eth_addr {
-       uint8_t mac[6];
-       uint8_t csum[2];
-};
-
-#define MYLO_ETHADDR_COUNT     8       /* maximum number of ethernet address
-                                          in the board parameters */
-
-struct mylo_board_params {
-       uint32_t        magic;  /* must be MYLO_MAGIC_BOARD_PARAMS */
-       uint32_t        res0;
-       uint32_t        res1;
-       uint32_t        res2;
-       struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
-};
-
-struct myloader_info {
-       u32     vid;
-       u32     did;
-       u32     svid;
-       u32     sdid;
-       uint8_t macs[MYLO_ETHADDR_COUNT][6];
-};
-
-extern struct myloader_info myloader_info;
-extern int myloader_present(void) __init;
-
-#endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
deleted file mode 100644 (file)
index 91ac05a..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Mikrotik's RouterBOOT definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_ROUTERBOOT_H_
-#define _PROM_ROUTERBOOT_H_
-
-struct rb_bios_settings {
-       u32     hs_offs; /* hard settings offset */
-       u32     hs_size; /* hard settings size */
-       u32     fw_offs; /* firmware offset */
-       u32     ss_offs; /* soft settings offset */
-       u32     ss_size; /* soft settings size */
-};
-
-struct rb_hard_settings {
-       char    *name;          /* board name */
-       char    *bios_ver;      /* BIOS version */
-       u32     mem_size;       /* memory size in bytes */
-       u32     mac_count;      /* number of mac addresses */
-       u8      *mac_base;      /* mac address base */
-};
-
-extern int routerboot_present(void) __init;
-extern char *routerboot_get_boardname(void);
-
-extern struct rb_hard_settings rb_hs;
-
-#endif /* _PROM_ROUTERBOOT_H_ */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/prom/zynos.h
deleted file mode 100644 (file)
index d1e3e5b..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  ZyNOS (ZyXEL's Networking OS) definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ZYNOS_H
-#define _ZYNOS_H
-
-#define ZYNOS_NAME_LEN         32
-#define ZYNOS_FEAT_BYTES       22
-#define ZYNOS_MAC_LEN          6
-
-struct zynos_board_info {
-       unsigned char   vendor[ZYNOS_NAME_LEN];
-       unsigned char   product[ZYNOS_NAME_LEN];
-       u32             bootext_addr;
-       u32             res0;
-       u16             board_id;
-       u8              res1[6];
-       u8              feat_other[ZYNOS_FEAT_BYTES];
-       u8              feat_main;
-       u8              res2;
-       u8              mac[ZYNOS_MAC_LEN];
-       u8              country;
-       u8              dbgflag;
-} __attribute__ ((packed));
-
-/*
- * Vendor IDs
- */
-#define ZYNOS_VENDOR_ID_ZYXEL  0
-#define ZYNOS_VENDOR_ID_NETGEAR        1
-#define ZYNOS_VENDOR_ID_DLINK  2
-#define ZYNOS_VENDOR_ID_OTHER  3
-#define ZYNOS_VENDOR_ID_LUCENT 4
-
-/*
- * Vendor names
- */
-#define ZYNOS_VENDOR_DLINK     "D-Link"
-#define ZYNOS_VENDOR_LUCENT    "LUCENT"
-#define ZYNOS_VENDOR_NETGEAR   "NetGear"
-#define ZYNOS_VENDOR_ZYXEL     "ZyXEL"
-
-/*
- * Board IDs (big-endian)
- */
-#define ZYNOS_BOARD_ES2108     0x00F2  /* Ethernet Switch 2108 */
-#define ZYNOS_BOARD_ES2108F    0x01AF  /* Ethernet Switch 2108-F */
-#define ZYNOS_BOARD_ES2108G    0x00F3  /* Ethernet Switch 2108-G */
-#define ZYNOS_BOARD_ES2108LC   0x00FC  /* Ethernet Switch 2108-LC */
-#define ZYNOS_BOARD_ES2108PWR  0x00F4  /* Ethernet Switch 2108PWR */
-#define ZYNOS_BOARD_HS100      0x9FF1  /* HomeSafe 100/100W */
-#define ZYNOS_BOARD_P334       0x9FF5  /* Prestige 334 */
-#define ZYNOS_BOARD_P334U      0x9FDD  /* Prestige 334U */
-#define ZYNOS_BOARD_P334W      0x9FF3  /* Prestige 334W */
-#define ZYNOS_BOARD_P334WH     0x00E0  /* Prestige 334WH */
-#define ZYNOS_BOARD_P334WHD    0x00E1  /* Prestige 334WHD */
-#define ZYNOS_BOARD_P334WT     0x9FEF  /* Prestige 334WT */
-#define ZYNOS_BOARD_P334WT_ALT 0x9F02  /* Prestige 334WT alternative*/
-#define ZYNOS_BOARD_P335       0x9FED  /* Prestige 335/335WT */
-#define ZYNOS_BOARD_P335PLUS   0x0025  /* Prestige 335Plus */
-#define ZYNOS_BOARD_P335U      0x9FDC  /* Prestige 335U */
-
-/*
- * Some magic numbers (big-endian)
- */
-#define ZYNOS_MAGIC_DBGAREA1   0x48646267      /* "Hdbg" */
-#define ZYNOS_MAGIC_DBGAREA2   0x61726561      /* "area" */
-
-struct bootbase_info {
-       u16             vendor_id;
-       u16             board_id;
-       u8              mac[6];
-};
-
-extern struct bootbase_info bootbase_info;
-extern int bootbase_present(void) __init;
-
-#endif /* _ZYNOS_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/war.h b/target/linux/adm5120/files-3.14/arch/mips/include/asm/mach-adm5120/war.h
deleted file mode 100644 (file)
index 87c35f3..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H
-#define __ASM_MIPS_MACH_ADM5120_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR    0
-#define R4600_V1_HIT_CACHEOP_WAR       0
-#define R4600_V2_HIT_CACHEOP_WAR       0
-#define R5432_CP0_INTERRUPT_WAR                0
-#define BCM1250_M3_WAR                 0
-#define SIBYTE_1956_WAR                        0
-#define MIPS4K_ICACHE_REFILL_WAR       0
-#define MIPS_CACHE_SYNC_WAR            0
-#define TX49XX_ICACHE_INDEX_INV_WAR    0
-#define RM9000_CDEX_SMP_WAR            0
-#define ICACHE_REFILLS_WORKAROUND_WAR  0
-#define R10000_LLSC_WAR                        0
-#define MIPS34K_MISSED_ITLB_WAR                0
-
-#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */
diff --git a/target/linux/adm5120/files-3.14/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files-3.14/arch/mips/pci/pci-adm5120.c
deleted file mode 100644 (file)
index f8d3598..0000000
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- *  ADM5120 PCI Host Controller driver
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices
- *     Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/pci_regs.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(f, a...)   printk(KERN_DEBUG f, ## a)
-#else
-#define DBG(f, a...)   do {} while (0)
-#endif
-
-#define PCI_ENABLE 0x80000000
-
-/* -------------------------------------------------------------------------*/
-
-static unsigned int adm5120_pci_nr_irqs __initdata;
-static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata;
-
-static DEFINE_SPINLOCK(pci_lock);
-
-/* -------------------------------------------------------------------------*/
-
-static inline void write_cfgaddr(u32 addr)
-{
-       __raw_writel((addr | PCI_ENABLE),
-               (void __iomem *)(KSEG1ADDR(ADM5120_PCICFG_ADDR)));
-}
-
-static inline void write_cfgdata(u32 data)
-{
-       __raw_writel(data, (void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 read_cfgdata(void)
-{
-       return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where)
-{
-       return ((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
-               (where & 0xFC);
-}
-
-/* -------------------------------------------------------------------------*/
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
-               int size, u32 *val)
-{
-       unsigned long flags;
-       u32 data;
-
-       spin_lock_irqsave(&pci_lock, flags);
-
-       write_cfgaddr(mkaddr(bus, devfn, where));
-       data = read_cfgdata();
-
-       DBG("PCI: cfg_read  %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
-               bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
-               where, size, data);
-
-       switch (size) {
-       case 1:
-               if (where & 1)
-                       data >>= 8;
-               if (where & 2)
-                       data >>= 16;
-               data &= 0xFF;
-               break;
-       case 2:
-               if (where & 2)
-                       data >>= 16;
-               data &= 0xFFFF;
-               break;
-       }
-
-       *val = data;
-       DBG(", 0x%08X returned\n", data);
-
-       spin_unlock_irqrestore(&pci_lock, flags);
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
-               int size, u32 val)
-{
-       unsigned long flags;
-       u32 data;
-       int s;
-
-       spin_lock_irqsave(&pci_lock, flags);
-
-       write_cfgaddr(mkaddr(bus, devfn, where));
-       data = read_cfgdata();
-
-       DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
-               bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
-               where, size, data);
-
-       switch (size) {
-       case 1:
-               s = ((where & 3) << 3);
-               data &= ~(0xFF << s);
-               data |= ((val & 0xFF) << s);
-               break;
-       case 2:
-               s = ((where & 2) << 4);
-               data &= ~(0xFFFF << s);
-               data |= ((val & 0xFFFF) << s);
-               break;
-       case 4:
-               data = val;
-               break;
-       }
-
-       write_cfgdata(data);
-       DBG(", 0x%08X written\n", data);
-
-       spin_unlock_irqrestore(&pci_lock, flags);
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops adm5120_pci_ops = {
-       .read   = pci_config_read,
-       .write  = pci_config_write,
-};
-
-/* -------------------------------------------------------------------------*/
-
-static void adm5120_pci_fixup(struct pci_dev *dev)
-{
-       if (dev->devfn != 0)
-               return;
-
-       /* setup COMMAND register */
-       pci_write_config_word(dev, PCI_COMMAND,
-               (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
-
-       /* setup CACHE_LINE_SIZE register */
-       pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
-
-       /* setup BARS */
-       pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
-       pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120,
-       adm5120_pci_fixup);
-
-/* -------------------------------------------------------------------------*/
-
-void __init adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map)
-{
-       adm5120_pci_nr_irqs = nr_irqs;
-       adm5120_pci_irq_map = map;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-       int irq = -1;
-       int i;
-
-       if ((!adm5120_pci_nr_irqs) || (!adm5120_pci_irq_map)) {
-               printk(KERN_ALERT "PCI: pci_irq_map is not initialized\n");
-               goto out;
-       }
-
-       if (slot < 1 || slot > 4) {
-               printk(KERN_ALERT "PCI: slot number %u is not supported\n",
-                       slot);
-               goto out;
-       }
-
-       for (i = 0; i < adm5120_pci_nr_irqs; i++) {
-               if ((adm5120_pci_irq_map[i].slot == slot)
-                       && (adm5120_pci_irq_map[i].func == PCI_FUNC(dev->devfn))
-                       && (adm5120_pci_irq_map[i].pin == pin)) {
-                       irq = adm5120_pci_irq_map[i].irq;
-                       break;
-               }
-       }
-
-       if (irq < 0) {
-               printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
-                       pci_name((struct pci_dev *)dev), pin);
-       } else {
-               printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
-                       pci_name((struct pci_dev *)dev), pin, irq);
-       }
-
-out:
-       return irq;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-       return 0;
-}
-
-/* -------------------------------------------------------------------------*/
-
-static struct resource pci_io_resource = {
-       .name   = "ADM5120 PCI I/O",
-       .start  = ADM5120_PCIIO_BASE,
-       .end    = ADM5120_PCICFG_ADDR-1,
-       .flags  = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-       .name   = "ADM5120 PCI MEM",
-       .start  = ADM5120_PCIMEM_BASE,
-       .end    = ADM5120_PCIIO_BASE-1,
-       .flags  = IORESOURCE_MEM
-};
-
-static struct pci_controller adm5120_controller = {
-       .pci_ops        = &adm5120_pci_ops,
-       .io_resource    = &pci_io_resource,
-       .mem_resource   = &pci_mem_resource,
-};
-
-static int __init adm5120_pci_setup(void)
-{
-       if (adm5120_package_pqfp()) {
-               printk(KERN_INFO "PCI: not available on ADM5120P\n");
-               return -1;
-       }
-
-       /* Avoid ISA compat ranges.  */
-       PCIBIOS_MIN_IO = 0x00000000;
-       PCIBIOS_MIN_MEM = 0x00000000;
-
-       /* Set I/O resource limits.  */
-       ioport_resource.end = 0x1fffffff;
-       iomem_resource.end = 0xffffffff;
-
-       register_pci_controller(&adm5120_controller);
-       return 0;
-}
-
-arch_initcall(adm5120_pci_setup);
diff --git a/target/linux/adm5120/files-3.14/drivers/ata/pata_rb153_cf.c b/target/linux/adm5120/files-3.14/drivers/ata/pata_rb153_cf.c
deleted file mode 100644 (file)
index 92a4d13..0000000
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *  A low-level PATA driver to handle a Compact Flash connected on the
- *  Mikrotik's RouterBoard 153 board.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was based on: drivers/ata/pata_ixp4xx_cf.c
- *     Copyright (C) 2006-07 Tower Technologies
- *     Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- *  Also was based on the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
- *  seems not to have a license.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/libata.h>
-#include <scsi/scsi_host.h>
-
-#define DRV_NAME       "pata-rb153-cf"
-#define DRV_VERSION    "0.5.0"
-#define DRV_DESC       "PATA driver for RouterBOARD 153 Compact Flash"
-
-#define RB153_CF_MAXPORTS      1
-#define RB153_CF_IO_DELAY      100
-
-#define RB153_CF_REG_CMD       0x0800
-#define RB153_CF_REG_CTRL      0x080E
-#define RB153_CF_REG_DATA      0x0C00
-
-struct rb153_cf_info {
-       void __iomem    *iobase;
-       unsigned int    gpio_line;
-       int             frozen;
-       unsigned int    irq;
-};
-
-static inline void rb153_pata_finish_io(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       /* FIXME: Keep previous delay. If this is merely a fence then
-        * ata_sff_sync might be sufficient. */
-       ata_sff_dma_pause(ap);
-       ndelay(RB153_CF_IO_DELAY);
-
-       irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-}
-
-static void rb153_pata_exec_command(struct ata_port *ap,
-                                       const struct ata_taskfile *tf)
-{
-       writeb(tf->command, ap->ioaddr.command_addr);
-       rb153_pata_finish_io(ap);
-}
-
-static unsigned int rb153_pata_data_xfer(struct ata_device *adev,
-                                       unsigned char *buf,
-                                       unsigned int buflen,
-                                       int write_data)
-{
-       void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr;
-       unsigned int t;
-
-       t = buflen;
-       if (write_data) {
-               for (; t > 0; t--, buf++)
-                       writeb(*buf, ioaddr);
-       } else {
-               for (; t > 0; t--, buf++)
-                       *buf = readb(ioaddr);
-       }
-
-       rb153_pata_finish_io(adev->link->ap);
-       return buflen;
-}
-
-static void rb153_pata_freeze(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       info->frozen = 1;
-}
-
-static void rb153_pata_thaw(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       info->frozen = 0;
-}
-
-static irqreturn_t rb153_pata_irq_handler(int irq, void *dev_instance)
-{
-       struct ata_host *ah = dev_instance;
-       struct rb153_cf_info *info = ah->private_data;
-
-       if (gpio_get_value(info->gpio_line)) {
-               irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
-               if (!info->frozen)
-                       ata_sff_interrupt(irq, dev_instance);
-       } else {
-               irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-       }
-
-       return IRQ_HANDLED;
-}
-
-static struct ata_port_operations rb153_pata_port_ops = {
-       .inherits               = &ata_sff_port_ops,
-       .sff_exec_command       = rb153_pata_exec_command,
-       .sff_data_xfer          = rb153_pata_data_xfer,
-       .freeze                 = rb153_pata_freeze,
-       .thaw                   = rb153_pata_thaw,
-};
-
-static struct scsi_host_template rb153_pata_sht = {
-       ATA_PIO_SHT(DRV_NAME),
-};
-
-static void rb153_pata_setup_port(struct ata_host *ah)
-{
-       struct rb153_cf_info *info = ah->private_data;
-       struct ata_port *ap;
-
-       ap = ah->ports[0];
-
-       ap->ops         = &rb153_pata_port_ops;
-       ap->pio_mask    = 0x1f; /* PIO4 */
-
-       ap->ioaddr.cmd_addr     = info->iobase + RB153_CF_REG_CMD;
-       ap->ioaddr.ctl_addr     = info->iobase + RB153_CF_REG_CTRL;
-       ap->ioaddr.altstatus_addr = info->iobase + RB153_CF_REG_CTRL;
-
-       ata_sff_std_ports(&ap->ioaddr);
-
-       ap->ioaddr.data_addr = info->iobase + RB153_CF_REG_DATA;
-}
-
-static int rb153_pata_driver_probe(struct platform_device *pdev)
-{
-       unsigned int irq;
-       int gpio;
-       struct resource *res;
-       struct ata_host *ah;
-       struct rb153_cf_info *info;
-       int ret;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(&pdev->dev, "no IOMEM resource found\n");
-               return -EINVAL;
-       }
-
-       irq = platform_get_irq(pdev, 0);
-       if (irq <= 0) {
-               dev_err(&pdev->dev, "no IRQ resource found\n");
-               return -ENOENT;
-       }
-
-       gpio = irq_to_gpio(irq);
-       if (gpio < 0) {
-               dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
-               return -ENOENT;
-       }
-
-       ret = gpio_request(gpio, DRV_NAME);
-       if (ret) {
-               dev_err(&pdev->dev, "GPIO request failed\n");
-               return ret;
-       }
-
-       ah = ata_host_alloc(&pdev->dev, RB153_CF_MAXPORTS);
-       if (!ah)
-               return -ENOMEM;
-
-       platform_set_drvdata(pdev, ah);
-
-       info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-       if (!info)
-               return -ENOMEM;
-
-       ah->private_data = info;
-       info->gpio_line = gpio;
-       info->irq = irq;
-
-       info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
-                               res->end - res->start + 1);
-       if (!info->iobase)
-               return -ENOMEM;
-
-       ret = gpio_direction_input(gpio);
-       if (ret) {
-               dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
-                               ret);
-               goto err_free_gpio;
-       }
-
-       rb153_pata_setup_port(ah);
-
-       ret = ata_host_activate(ah, irq, rb153_pata_irq_handler,
-                               IRQF_TRIGGER_LOW, &rb153_pata_sht);
-       if (ret)
-               goto err_free_gpio;
-
-       return 0;
-
-err_free_gpio:
-       gpio_free(gpio);
-
-       return ret;
-}
-
-static int rb153_pata_driver_remove(struct platform_device *pdev)
-{
-       struct ata_host *ah = platform_get_drvdata(pdev);
-       struct rb153_cf_info *info = ah->private_data;
-
-       ata_host_detach(ah);
-       gpio_free(info->gpio_line);
-
-       return 0;
-}
-
-static struct platform_driver rb153_pata_platform_driver = {
-       .probe          = rb153_pata_driver_probe,
-       .remove         = rb153_pata_driver_remove,
-       .driver  = {
-               .name   = DRV_NAME,
-               .owner  = THIS_MODULE,
-       },
-};
-
-/* ------------------------------------------------------------------------ */
-
-#define DRV_INFO DRV_DESC " version " DRV_VERSION
-
-static int __init rb153_pata_module_init(void)
-{
-       printk(KERN_INFO DRV_INFO "\n");
-
-       return platform_driver_register(&rb153_pata_platform_driver);
-}
-
-static void __exit rb153_pata_module_exit(void)
-{
-       platform_driver_unregister(&rb153_pata_platform_driver);
-}
-
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL v2");
-
-module_init(rb153_pata_module_init);
-module_exit(rb153_pata_module_exit);
diff --git a/target/linux/adm5120/files-3.14/drivers/leds/ledtrig-adm5120-switch.c b/target/linux/adm5120/files-3.14/drivers/leds/ledtrig-adm5120-switch.c
deleted file mode 100644 (file)
index 23a54a0..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * LED ADM5120 Switch Port State Trigger
- *
- * Copyright (C) 2007 Bernhard Held <bernhard at bernhardheld.de>
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on: drivers/leds/ledtrig-timer.c
- *     Copyright 2005-2006 Openedhand Ltd.
- *     Author: Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <linux/gpio.h>
-
-#include "leds.h"
-
-#define DRV_NAME "port_state"
-#define DRV_DESC "LED ADM5120 Switch Port State Trigger"
-
-struct port_state {
-       char *name;
-       unsigned int value;
-};
-
-#define PORT_STATE(n, v) {.name = (n), .value = (v)}
-
-static struct port_state port_states[] = {
-       PORT_STATE("off",               LED_OFF),
-       PORT_STATE("on",                LED_FULL),
-       PORT_STATE("flash",             ADM5120_GPIO_FLASH),
-       PORT_STATE("link",              ADM5120_GPIO_LINK),
-       PORT_STATE("speed",             ADM5120_GPIO_SPEED),
-       PORT_STATE("duplex",            ADM5120_GPIO_DUPLEX),
-       PORT_STATE("act",               ADM5120_GPIO_ACT),
-       PORT_STATE("coll",              ADM5120_GPIO_COLL),
-       PORT_STATE("link_act",          ADM5120_GPIO_LINK_ACT),
-       PORT_STATE("duplex_coll",       ADM5120_GPIO_DUPLEX_COLL),
-       PORT_STATE("10M_act",           ADM5120_GPIO_10M_ACT),
-       PORT_STATE("100M_act",          ADM5120_GPIO_100M_ACT),
-};
-
-static ssize_t led_port_state_show(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct led_classdev *led_cdev = dev_get_drvdata(dev);
-       struct port_state *state = led_cdev->trigger_data;
-       int len = 0;
-       int i;
-
-       *buf = '\0';
-       for (i = 0; i < ARRAY_SIZE(port_states); i++) {
-               if (&port_states[i] == state)
-                       len += sprintf(buf+len, "[%s] ", port_states[i].name);
-               else
-                       len += sprintf(buf+len, "%s ", port_states[i].name);
-       }
-       len += sprintf(buf+len, "\n");
-
-       return len;
-}
-
-static ssize_t led_port_state_store(struct device *dev,
-               struct device_attribute *attr, const char *buf, size_t size)
-{
-       struct led_classdev *led_cdev = dev_get_drvdata(dev);
-       size_t len;
-       int i;
-
-       for (i = 0; i < ARRAY_SIZE(port_states); i++) {
-               len = strlen(port_states[i].name);
-               if (strncmp(port_states[i].name, buf, len) != 0)
-                       continue;
-
-               if (buf[len] != '\0' && buf[len] != '\n')
-                       continue;
-
-               led_cdev->trigger_data = &port_states[i];
-               led_set_brightness(led_cdev, port_states[i].value);
-               return size;
-       }
-
-       return -EINVAL;
-}
-
-static DEVICE_ATTR(port_state, 0644, led_port_state_show,
-                        led_port_state_store);
-
-static void adm5120_switch_trig_activate(struct led_classdev *led_cdev)
-{
-       struct port_state *state = port_states;
-       int rc;
-
-       led_cdev->trigger_data = state;
-
-       rc = device_create_file(led_cdev->dev, &dev_attr_port_state);
-       if (rc)
-               goto err;
-
-       led_set_brightness(led_cdev, state->value);
-
-       return;
-err:
-       led_cdev->trigger_data = NULL;
-}
-
-static void adm5120_switch_trig_deactivate(struct led_classdev *led_cdev)
-{
-       struct port_state *state = led_cdev->trigger_data;
-
-       if (!state)
-               return;
-
-       device_remove_file(led_cdev->dev, &dev_attr_port_state);
-
-}
-
-static struct led_trigger adm5120_switch_led_trigger = {
-       .name           = DRV_NAME,
-       .activate       = adm5120_switch_trig_activate,
-       .deactivate     = adm5120_switch_trig_deactivate,
-};
-
-static int __init adm5120_switch_trig_init(void)
-{
-       led_trigger_register(&adm5120_switch_led_trigger);
-       return 0;
-}
-
-static void __exit adm5120_switch_trig_exit(void)
-{
-       led_trigger_unregister(&adm5120_switch_led_trigger);
-}
-
-module_init(adm5120_switch_trig_init);
-module_exit(adm5120_switch_trig_exit);
-
-MODULE_AUTHOR("Bernhard Held <bernhard at bernhardheld.de>, "
-               "Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files-3.14/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files-3.14/drivers/mtd/maps/adm5120-flash.c
deleted file mode 100644 (file)
index f6a86f4..0000000
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- *  Platform driver for NOR flash devices on ADM5120 based boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was derived from: drivers/mtd/map/physmap.c
- *     Copyright (C) 2003 MontaVista Software Inc.
- *     Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_mpmc.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#define DRV_NAME       "adm5120-flash"
-#define DRV_DESC       "ADM5120 flash MAP driver"
-#define MAX_PARSED_PARTS 8
-
-#ifdef ADM5120_FLASH_DEBUG
-#define MAP_DBG(m, f, a...)    printk(KERN_INFO "%s: " f, (m->name) , ## a)
-#else
-#define MAP_DBG(m, f, a...)    do {} while (0)
-#endif
-#define MAP_ERR(m, f, a...)    printk(KERN_ERR "%s: " f, (m->name) , ## a)
-#define MAP_INFO(m, f, a...)   printk(KERN_INFO "%s: " f, (m->name) , ## a)
-
-struct adm5120_map_info {
-       struct map_info map;
-       void            (*switch_bank)(unsigned);
-       unsigned long   window_size;
-};
-
-struct adm5120_flash_info {
-       struct mtd_info         *mtd;
-       struct resource         *res;
-       struct platform_device  *dev;
-       struct adm5120_map_info amap;
-};
-
-struct flash_desc {
-       u32     phys;
-       u32     srs_shift;
-};
-
-/*
- * Globals
- */
-static DEFINE_SPINLOCK(adm5120_flash_spin);
-#define FLASH_LOCK()   spin_lock(&adm5120_flash_spin)
-#define FLASH_UNLOCK() spin_unlock(&adm5120_flash_spin)
-
-static u32 flash_bankwidths[4] = { 1, 2, 4, 0 };
-
-static u32 flash_sizes[8] = {
-       0, 512*1024, 1024*1024, 2*1024*1024,
-       4*1024*1024, 0, 0, 0
-};
-
-static struct flash_desc flash_descs[2] = {
-       {
-               .phys           = ADM5120_SRAM0_BASE,
-               .srs_shift      = MEMCTRL_SRS0_SHIFT,
-       }, {
-               .phys           = ADM5120_SRAM1_BASE,
-               .srs_shift      = MEMCTRL_SRS1_SHIFT,
-       }
-};
-
-static const char const *probe_types[] = {
-       "cfi_probe",
-       "jedec_probe",
-       "map_rom",
-       NULL
-};
-
-static const char const *parse_types[] = {
-       "cmdlinepart",
-#ifdef CONFIG_MTD_REDBOOT_PARTS
-       "RedBoot",
-#endif
-#ifdef CONFIG_MTD_MYLOADER_PARTS
-       "MyLoader",
-#endif
-       NULL,
-};
-
-#define BANK_SIZE      (2<<20)
-#define BANK_SIZE_MAX  (4<<20)
-#define BANK_OFFS_MASK (BANK_SIZE-1)
-#define BANK_START_MASK        (~BANK_OFFS_MASK)
-
-static inline struct adm5120_map_info *map_to_amap(struct map_info *map)
-{
-       return (struct adm5120_map_info *)map;
-}
-
-static void adm5120_flash_switchbank(struct map_info *map,
-               unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       unsigned bank;
-
-       if (amap->switch_bank == NULL)
-               return;
-
-       bank = (ofs & BANK_START_MASK) >> 21;
-       if (bank > 1)
-               BUG();
-
-       MAP_DBG(map, "switching to bank %u, ofs=%lX\n", bank, ofs);
-       amap->switch_bank(bank);
-}
-
-static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       map_word ret;
-
-       MAP_DBG(map, "reading from ofs %lX\n", ofs);
-
-       if (ofs >= amap->window_size)
-               return map_word_ff(map);
-
-       FLASH_LOCK();
-       adm5120_flash_switchbank(map, ofs);
-       ret = inline_map_read(map, (ofs & (amap->window_size-1)));
-       FLASH_UNLOCK();
-
-       return ret;
-}
-
-static void adm5120_flash_write(struct map_info *map, const map_word datum,
-               unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-
-       MAP_DBG(map, "writing to ofs %lX\n", ofs);
-
-       if (ofs > amap->window_size)
-               return;
-
-       FLASH_LOCK();
-       adm5120_flash_switchbank(map, ofs);
-       inline_map_write(map, datum, (ofs & (amap->window_size-1)));
-       FLASH_UNLOCK();
-}
-
-static void adm5120_flash_copy_from(struct map_info *map, void *to,
-               unsigned long from, ssize_t len)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       char *p;
-       ssize_t t;
-
-       MAP_DBG(map, "copy_from, to=%lX, from=%lX, len=%lX\n",
-               (unsigned long)to, from, (unsigned long)len);
-
-       if (from > amap->window_size)
-               return;
-
-       p = (char *)to;
-       while (len > 0) {
-               t = len;
-               if ((from < BANK_SIZE) && ((from+len) > BANK_SIZE))
-                       t = BANK_SIZE-from;
-
-               FLASH_LOCK();
-               MAP_DBG(map, "copying %lu byte(s) from %lX to %lX\n",
-                       (unsigned long)t, (from & (amap->window_size-1)),
-                       (unsigned long)p);
-               adm5120_flash_switchbank(map, from);
-               inline_map_copy_from(map, p, (from & (amap->window_size-1)), t);
-               FLASH_UNLOCK();
-               p += t;
-               from += t;
-               len -= t;
-       }
-}
-
-static int adm5120_flash_initres(struct adm5120_flash_info *info)
-{
-       struct map_info *map = &info->amap.map;
-       int err = 0;
-
-       info->res = request_mem_region(map->phys, info->amap.window_size,
-                       map->name);
-       if (info->res == NULL) {
-               MAP_ERR(map, "could not reserve memory region\n");
-               err = -ENOMEM;
-               goto out;
-       }
-
-       map->virt = ioremap_nocache(map->phys, info->amap.window_size);
-       if (map->virt == NULL) {
-               MAP_ERR(map, "failed to ioremap flash region\n");
-               err = -ENOMEM;
-               goto out;
-       }
-
-out:
-       return err;
-}
-
-static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
-               struct platform_device *dev)
-{
-       struct map_info *map = &info->amap.map;
-       struct adm5120_flash_platform_data *pdata = dev->dev.platform_data;
-       struct flash_desc *fdesc;
-       u32 t = 0;
-
-       map->name = dev_name(&dev->dev);
-
-       if (dev->id > 1) {
-               MAP_ERR(map, "invalid flash id\n");
-               goto err_out;
-       }
-
-       fdesc = &flash_descs[dev->id];
-
-       if (pdata)
-               info->amap.window_size = pdata->window_size;
-
-       if (info->amap.window_size == 0) {
-               /* get memory window size */
-               t = SW_READ_REG(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift;
-               t &= MEMCTRL_SRS_MASK;
-               info->amap.window_size = flash_sizes[t];
-       }
-
-       if (info->amap.window_size == 0) {
-               MAP_ERR(map, "unable to determine window size\n");
-               goto err_out;
-       }
-
-       /* get flash bus width */
-       switch (dev->id) {
-       case 0:
-               t = MPMC_READ_REG(SC1) & SC_MW_MASK;
-               break;
-       case 1:
-               t = MPMC_READ_REG(SC0) & SC_MW_MASK;
-               break;
-       }
-       map->bankwidth = flash_bankwidths[t];
-       if (map->bankwidth == 0) {
-               MAP_ERR(map, "invalid bus width detected\n");
-               goto err_out;
-       }
-
-       map->phys = fdesc->phys;
-       map->size = BANK_SIZE_MAX;
-
-       simple_map_init(map);
-       map->read = adm5120_flash_read;
-       map->write = adm5120_flash_write;
-       map->copy_from = adm5120_flash_copy_from;
-
-       if (pdata) {
-               map->set_vpp = pdata->set_vpp;
-               info->amap.switch_bank = pdata->switch_bank;
-       }
-
-       info->dev = dev;
-
-       MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n",
-               (unsigned long)map->phys,
-               (unsigned long)info->amap.window_size >> 10,
-               map->bankwidth*8);
-
-       return 0;
-
-err_out:
-       return -ENODEV;
-}
-
-static void adm5120_flash_initbanks(struct adm5120_flash_info *info)
-{
-       struct map_info *map = &info->amap.map;
-
-       if (info->mtd->size <= BANK_SIZE)
-               /* no bank switching needed */
-               return;
-
-       if (info->amap.switch_bank) {
-               info->amap.window_size = info->mtd->size;
-               return;
-       }
-
-       MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n",
-               (unsigned long)map->size >> 10,
-               (unsigned long)info->mtd->size >> 10);
-
-       info->mtd->size = info->amap.window_size;
-}
-
-static int adm5120_flash_remove(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info;
-
-       info = platform_get_drvdata(dev);
-       if (info == NULL)
-               return 0;
-
-       platform_set_drvdata(dev, NULL);
-
-       if (info->mtd != NULL) {
-               mtd_device_unregister(info->mtd);
-               map_destroy(info->mtd);
-       }
-
-       if (info->amap.map.virt != NULL)
-               iounmap(info->amap.map.virt);
-
-       if (info->res != NULL) {
-               release_resource(info->res);
-               kfree(info->res);
-       }
-
-       return 0;
-}
-
-static int adm5120_flash_probe(struct platform_device *dev)
-{
-       struct adm5120_flash_platform_data *pdata;
-       struct adm5120_flash_info *info;
-       struct map_info *map;
-       const char **probe_type;
-       int err;
-
-       pdata = dev->dev.platform_data;
-       if (!pdata) {
-               dev_err(&dev->dev, "no platform data\n");
-               return -EINVAL;
-       }
-
-       info = kzalloc(sizeof(*info), GFP_KERNEL);
-       if (info == NULL) {
-               err = -ENOMEM;
-               goto err_out;
-       }
-
-       platform_set_drvdata(dev, info);
-
-       err = adm5120_flash_initinfo(info, dev);
-       if (err)
-               goto err_out;
-
-       err = adm5120_flash_initres(info);
-       if (err)
-               goto err_out;
-
-       map = &info->amap.map;
-       for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL;
-               probe_type++)
-               info->mtd = do_map_probe(*probe_type, map);
-
-       if (info->mtd == NULL) {
-               MAP_ERR(map, "map_probe failed\n");
-               err = -ENXIO;
-               goto err_out;
-       }
-
-       adm5120_flash_initbanks(info);
-
-       if (info->mtd->size < info->amap.window_size) {
-               /* readjust resources */
-               iounmap(map->virt);
-               release_resource(info->res);
-               kfree(info->res);
-
-               info->amap.window_size = info->mtd->size;
-               map->size = info->mtd->size;
-               MAP_INFO(map, "reducing map size to %ldKiB\n",
-                       (unsigned long)map->size >> 10);
-               err = adm5120_flash_initres(info);
-               if (err)
-                       goto err_out;
-       }
-
-       MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n",
-               (unsigned long)map->phys, (unsigned long)info->mtd->size >> 10,
-               map->bankwidth*8);
-
-       info->mtd->owner = THIS_MODULE;
-
-       err = mtd_device_parse_register(info->mtd, parse_types, 0,
-                                       pdata->parts, pdata->nr_parts);
-       if (err)
-               goto err_out;
-
-       return 0;
-
-err_out:
-       adm5120_flash_remove(dev);
-       return err;
-}
-
-#ifdef CONFIG_PM
-static int adm5120_flash_suspend(struct platform_device *dev,
-               pm_message_t state)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-       int ret = 0;
-
-       if (info)
-               ret = info->mtd->suspend(info->mtd);
-
-       return ret;
-}
-
-static int adm5120_flash_resume(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-
-       if (info)
-               info->mtd->resume(info->mtd);
-
-       return 0;
-}
-
-static void adm5120_flash_shutdown(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-
-       if (info && info->mtd->suspend(info->mtd) == 0)
-               info->mtd->resume(info->mtd);
-}
-#endif
-
-static struct platform_driver adm5120_flash_driver = {
-       .probe          = adm5120_flash_probe,
-       .remove         = adm5120_flash_remove,
-#ifdef CONFIG_PM
-       .suspend        = adm5120_flash_suspend,
-       .resume         = adm5120_flash_resume,
-       .shutdown       = adm5120_flash_shutdown,
-#endif
-       .driver         = {
-               .name   = DRV_NAME,
-       },
-};
-
-static int __init adm5120_flash_init(void)
-{
-       int err;
-
-       err = platform_driver_register(&adm5120_flash_driver);
-
-       return err;
-}
-
-static void __exit adm5120_flash_exit(void)
-{
-       platform_driver_unregister(&adm5120_flash_driver);
-}
-
-module_init(adm5120_flash_init);
-module_exit(adm5120_flash_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
diff --git a/target/linux/adm5120/files-3.14/drivers/mtd/trxsplit.c b/target/linux/adm5120/files-3.14/drivers/mtd/trxsplit.c
deleted file mode 100644 (file)
index 76cbdc7..0000000
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- *  Copyright (C) Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/kmod.h>
-#include <linux/root_dev.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/byteorder/generic.h>
-
-#define PFX    "trxsplit: "
-
-#define TRX_MAGIC      0x30524448      /* "HDR0" */
-#define TRX_VERSION    1
-#define TRX_MAX_LEN    0x3A0000
-#define TRX_NO_HEADER  0x1     /* do not write TRX header */
-#define TRX_GZ_FILES   0x2     /* contains individual gzip files */
-#define TRX_MAX_OFFSET 3
-#define TRX_MIN_KERNEL_SIZE    (256 * 1024)
-
-struct trx_header {
-       u32 magic;      /* "HDR0" */
-       u32 len;        /* Length of file including header */
-       u32 crc32;      /* 32-bit CRC from flag_version to end of file */
-       u32 flag_version; /* 0:15 flags, 16:31 version */
-       u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions */
-};
-
-#define TRX_ALIGN      0x1000
-
-static int trx_nr_parts;
-static unsigned long trx_offset;
-static struct mtd_info *trx_mtd;
-static struct mtd_partition trx_parts[TRX_MAX_OFFSET];
-static struct trx_header trx_hdr;
-
-static int trxsplit_refresh_partitions(struct mtd_info *mtd);
-
-static int trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset)
-{
-       size_t retlen;
-       int err;
-
-       err = mtd_read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr);
-       if (err) {
-               printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name);
-               goto err_out;
-       }
-
-       if (retlen != sizeof(trx_hdr)) {
-               printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name);
-               goto err_out;
-       }
-
-       trx_hdr.magic = le32_to_cpu(trx_hdr.magic);
-       trx_hdr.len = le32_to_cpu(trx_hdr.len);
-       trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32);
-       trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version);
-       trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]);
-       trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]);
-       trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]);
-
-       /* sanity checks */
-       if (trx_hdr.magic != TRX_MAGIC)
-               goto err_out;
-
-       if (trx_hdr.len > mtd->size - offset)
-               goto err_out;
-
-       /* TODO: add crc32 checking too? */
-
-       return 0;
-
-err_out:
-       return -1;
-}
-
-static void trxsplit_findtrx(struct mtd_info *mtd)
-{
-       unsigned long offset;
-       int err;
-
-       printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name);
-
-       err = 0;
-       for (offset = 0; offset < mtd->size; offset += TRX_ALIGN) {
-               err = trxsplit_checktrx(mtd, offset);
-               if (err == 0)
-                       break;
-       }
-
-       if (err)
-               return;
-
-       printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset);
-
-       trx_mtd = mtd;
-       trx_offset = offset;
-}
-
-static void trxsplit_create_partitions(struct mtd_info *mtd)
-{
-       struct mtd_partition *part = trx_parts;
-       int err;
-       int i;
-
-       for (i = 0; i < TRX_MAX_OFFSET; i++) {
-               part = &trx_parts[i];
-               if (trx_hdr.offsets[i] == 0)
-                       continue;
-               part->offset = trx_offset + trx_hdr.offsets[i];
-               trx_nr_parts++;
-       }
-
-       for (i = 0; i < trx_nr_parts-1; i++)
-               trx_parts[i].size = trx_parts[i+1].offset - trx_parts[i].offset;
-
-       trx_parts[i].size = mtd->size - trx_parts[i].offset;
-
-       i = 0;
-       part = &trx_parts[i];
-       if (part->size < TRX_MIN_KERNEL_SIZE) {
-               part->name = "loader";
-               i++;
-       }
-
-       part = &trx_parts[i];
-       part->name = "kernel";
-       i++;
-
-       part = &trx_parts[i];
-       part->name = "rootfs";
-
-       err = mtd_device_register(mtd, trx_parts, trx_nr_parts);
-       if (err) {
-               printk(KERN_ALERT PFX "adding TRX partitions failed\n");
-               return;
-       }
-
-       mtd->refresh_device = trxsplit_refresh_partitions;
-}
-
-static int trxsplit_refresh_partitions(struct mtd_info *mtd)
-{
-       printk(KERN_INFO PFX "refreshing TRX partitions in '%s' (%d,%d)\n",
-               mtd->name, MTD_BLOCK_MAJOR, mtd->index);
-
-       /* remove old partitions */
-       mtd_device_unregister(mtd);
-
-       trxsplit_findtrx(mtd);
-       if (!trx_mtd)
-               goto err;
-
-       trxsplit_create_partitions(trx_mtd);
-       return 1;
-
-err:
-       return 0;
-}
-
-static void __init trxsplit_add_mtd(struct mtd_info *mtd)
-{
-       if (mtd->type != MTD_NORFLASH) {
-               printk(KERN_INFO PFX "'%s' is not a NOR flash, skipped\n",
-                               mtd->name);
-               return;
-       }
-
-       if (!trx_mtd)
-               trxsplit_findtrx(mtd);
-}
-
-static void __init trxsplit_remove_mtd(struct mtd_info *mtd)
-{
-       /* nothing to do */
-}
-
-static struct mtd_notifier trxsplit_notifier __initdata = {
-       .add    = trxsplit_add_mtd,
-       .remove = trxsplit_remove_mtd,
-};
-
-static void __init trxsplit_scan(void)
-{
-       register_mtd_user(&trxsplit_notifier);
-       unregister_mtd_user(&trxsplit_notifier);
-}
-
-static int __init trxsplit_init(void)
-{
-       trxsplit_scan();
-
-       if (trx_mtd) {
-               printk(KERN_INFO PFX "creating TRX partitions in '%s' "
-                       "(%d,%d)\n", trx_mtd->name, MTD_BLOCK_MAJOR,
-                       trx_mtd->index);
-               trxsplit_create_partitions(trx_mtd);
-       }
-
-       return 0;
-}
-
-late_initcall(trxsplit_init);
diff --git a/target/linux/adm5120/files-3.14/drivers/net/adm5120sw.c b/target/linux/adm5120/files-3.14/drivers/net/adm5120sw.c
deleted file mode 100644 (file)
index 7fbabb0..0000000
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- *  ADM5120 built-in ethernet switch driver
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This code was based on a driver for Linux 2.6.xx by Jeroen Vreeken.
- *    Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *  NAPI extension for the Jeroen's driver
- *    Copyright Thomas Langer (Thomas.Langer@infineon.com), 2007
- *    Copyright Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007
- *  Inspiration for the Jeroen's driver came from the ADMtek 2.4 driver.
- *    Copyright ADMtek Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2  as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/mipsregs.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#include "adm5120sw.h"
-#include <linux/dma-mapping.h>
-
-#define DRV_NAME       "adm5120-switch"
-#define DRV_DESC       "ADM5120 built-in ethernet switch driver"
-#define DRV_VERSION    "0.1.1"
-
-#define CONFIG_ADM5120_SWITCH_NAPI     1
-#undef CONFIG_ADM5120_SWITCH_DEBUG
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_DEBUG
-#define SW_DBG(f, a...)                printk(KERN_DEBUG "%s: " f, DRV_NAME , ## a)
-#else
-#define SW_DBG(f, a...)                do {} while (0)
-#endif
-#define SW_ERR(f, a...)                printk(KERN_ERR "%s: " f, DRV_NAME , ## a)
-#define SW_INFO(f, a...)       printk(KERN_INFO "%s: " f, DRV_NAME , ## a)
-
-#define SWITCH_NUM_PORTS       6
-#define ETH_CSUM_LEN           4
-
-#define RX_MAX_PKTLEN  1550
-#define RX_RING_SIZE   64
-
-#define TX_RING_SIZE   32
-#define TX_QUEUE_LEN   28      /* Limit ring entries actually used. */
-#define TX_TIMEOUT     (HZ * 400)
-
-#define RX_DESCS_SIZE  (RX_RING_SIZE * sizeof(struct dma_desc *))
-#define RX_SKBS_SIZE   (RX_RING_SIZE * sizeof(struct sk_buff *))
-#define TX_DESCS_SIZE  (TX_RING_SIZE * sizeof(struct dma_desc *))
-#define TX_SKBS_SIZE   (TX_RING_SIZE * sizeof(struct sk_buff *))
-
-#define SKB_ALLOC_LEN          (RX_MAX_PKTLEN + 32)
-#define SKB_RESERVE_LEN                (NET_IP_ALIGN + NET_SKB_PAD)
-
-#define SWITCH_INTS_HIGH (SWITCH_INT_SHD | SWITCH_INT_RHD | SWITCH_INT_HDF)
-#define SWITCH_INTS_LOW (SWITCH_INT_SLD | SWITCH_INT_RLD | SWITCH_INT_LDF)
-#define SWITCH_INTS_ERR (SWITCH_INT_RDE | SWITCH_INT_SDE | SWITCH_INT_CPUH)
-#define SWITCH_INTS_Q (SWITCH_INT_P0QF | SWITCH_INT_P1QF | SWITCH_INT_P2QF | \
-                       SWITCH_INT_P3QF | SWITCH_INT_P4QF | SWITCH_INT_P5QF | \
-                       SWITCH_INT_CPQF | SWITCH_INT_GQF)
-
-#define SWITCH_INTS_ALL (SWITCH_INTS_HIGH | SWITCH_INTS_LOW | \
-                       SWITCH_INTS_ERR | SWITCH_INTS_Q | \
-                       SWITCH_INT_MD | SWITCH_INT_PSC)
-
-#define SWITCH_INTS_USED (SWITCH_INTS_LOW | SWITCH_INT_PSC)
-#define SWITCH_INTS_POLL (SWITCH_INT_RLD | SWITCH_INT_LDF | SWITCH_INT_SLD)
-
-/* ------------------------------------------------------------------------ */
-
-struct adm5120_if_priv {
-       struct net_device *dev;
-
-       unsigned int    vlan_no;
-       unsigned int    port_mask;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       struct napi_struct napi;
-#endif
-};
-
-struct dma_desc {
-       __u32                   buf1;
-#define DESC_OWN               (1UL << 31)     /* Owned by the switch */
-#define DESC_EOR               (1UL << 28)     /* End of Ring */
-#define DESC_ADDR_MASK         0x1FFFFFF
-#define DESC_ADDR(x)   ((__u32)(x) & DESC_ADDR_MASK)
-       __u32                   buf2;
-#define DESC_BUF2_EN           (1UL << 31)     /* Buffer 2 enable */
-       __u32                   buflen;
-       __u32                   misc;
-/* definitions for tx/rx descriptors */
-#define DESC_PKTLEN_SHIFT      16
-#define DESC_PKTLEN_MASK       0x7FF
-/* tx descriptor specific part */
-#define DESC_CSUM              (1UL << 31)     /* Append checksum */
-#define DESC_DSTPORT_SHIFT     8
-#define DESC_DSTPORT_MASK      0x3F
-#define DESC_VLAN_MASK         0x3F
-/* rx descriptor specific part */
-#define DESC_SRCPORT_SHIFT     12
-#define DESC_SRCPORT_MASK      0x7
-#define DESC_DA_MASK           0x3
-#define DESC_DA_SHIFT          4
-#define DESC_IPCSUM_FAIL       (1UL << 3)      /* IP checksum fail */
-#define DESC_VLAN_TAG          (1UL << 2)      /* VLAN tag present */
-#define DESC_TYPE_MASK         0x3             /* mask for Packet type */
-#define DESC_TYPE_IP           0x0             /* IP packet */
-#define DESC_TYPE_PPPoE                0x1             /* PPPoE packet */
-} __attribute__ ((aligned(16)));
-
-/* ------------------------------------------------------------------------ */
-
-static int adm5120_nrdevs;
-
-static struct net_device *adm5120_devs[SWITCH_NUM_PORTS];
-/* Lookup table port -> device */
-static struct net_device *adm5120_port[SWITCH_NUM_PORTS];
-
-static struct dma_desc *txl_descs;
-static struct dma_desc *rxl_descs;
-
-static dma_addr_t txl_descs_dma;
-static dma_addr_t rxl_descs_dma;
-
-static struct sk_buff **txl_skbuff;
-static struct sk_buff **rxl_skbuff;
-
-static unsigned int cur_rxl, dirty_rxl; /* producer/consumer ring indices */
-static unsigned int cur_txl, dirty_txl;
-
-static unsigned int sw_used;
-
-static DEFINE_SPINLOCK(tx_lock);
-
-/* ------------------------------------------------------------------------ */
-
-static inline u32 sw_read_reg(u32 reg)
-{
-       return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
-}
-
-static inline void sw_write_reg(u32 reg, u32 val)
-{
-       __raw_writel(val, (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
-}
-
-static inline void sw_int_mask(u32 mask)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       t |= mask;
-       sw_write_reg(SWITCH_REG_INT_MASK, t);
-}
-
-static inline void sw_int_unmask(u32 mask)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       t &= ~mask;
-       sw_write_reg(SWITCH_REG_INT_MASK, t);
-}
-
-static inline void sw_int_ack(u32 mask)
-{
-       sw_write_reg(SWITCH_REG_INT_STATUS, mask);
-}
-
-static inline u32 sw_int_status(void)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_STATUS);
-       t &= ~sw_read_reg(SWITCH_REG_INT_MASK);
-       return t;
-}
-
-static inline u32 desc_get_srcport(struct dma_desc *desc)
-{
-       return (desc->misc >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK;
-}
-
-static inline u32 desc_get_pktlen(struct dma_desc *desc)
-{
-       return (desc->misc >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK;
-}
-
-static inline int desc_ipcsum_fail(struct dma_desc *desc)
-{
-       return ((desc->misc & DESC_IPCSUM_FAIL) != 0);
-}
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_DEBUG
-static void sw_dump_desc(char *label, struct dma_desc *desc, int tx)
-{
-       u32 t;
-
-       SW_DBG("%s %s desc/%p\n", label, tx ? "tx" : "rx", desc);
-
-       t = desc->buf1;
-       SW_DBG("    buf1 %08X addr=%08X; len=%08X %s%s\n", t,
-               t & DESC_ADDR_MASK,
-               desc->buflen,
-               (t & DESC_OWN) ? "SWITCH" : "CPU",
-               (t & DESC_EOR) ? " RE" : "");
-
-       t = desc->buf2;
-       SW_DBG("    buf2 %08X addr=%08X%s\n", desc->buf2,
-               t & DESC_ADDR_MASK,
-               (t & DESC_BUF2_EN) ? " EN" : "");
-
-       t = desc->misc;
-       if (tx)
-               SW_DBG("    misc %08X%s pktlen=%04X ports=%02X vlan=%02X\n", t,
-                       (t & DESC_CSUM) ? " CSUM" : "",
-                       (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
-                       (t >> DESC_DSTPORT_SHIFT) & DESC_DSTPORT_MASK,
-                       t & DESC_VLAN_MASK);
-       else
-               SW_DBG("    misc %08X pktlen=%04X port=%d DA=%d%s%s type=%d\n",
-                       t,
-                       (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
-                       (t >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK,
-                       (t >> DESC_DA_SHIFT) & DESC_DA_MASK,
-                       (t & DESC_IPCSUM_FAIL) ? " IPCF" : "",
-                       (t & DESC_VLAN_TAG) ? " VLAN" : "",
-                       (t & DESC_TYPE_MASK));
-}
-
-static void sw_dump_intr_mask(char *label, u32 mask)
-{
-       SW_DBG("%s %08X%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
-               label, mask,
-               (mask & SWITCH_INT_SHD) ? " SHD" : "",
-               (mask & SWITCH_INT_SLD) ? " SLD" : "",
-               (mask & SWITCH_INT_RHD) ? " RHD" : "",
-               (mask & SWITCH_INT_RLD) ? " RLD" : "",
-               (mask & SWITCH_INT_HDF) ? " HDF" : "",
-               (mask & SWITCH_INT_LDF) ? " LDF" : "",
-               (mask & SWITCH_INT_P0QF) ? " P0QF" : "",
-               (mask & SWITCH_INT_P1QF) ? " P1QF" : "",
-               (mask & SWITCH_INT_P2QF) ? " P2QF" : "",
-               (mask & SWITCH_INT_P3QF) ? " P3QF" : "",
-               (mask & SWITCH_INT_P4QF) ? " P4QF" : "",
-               (mask & SWITCH_INT_CPQF) ? " CPQF" : "",
-               (mask & SWITCH_INT_GQF) ? " GQF" : "",
-               (mask & SWITCH_INT_MD) ? " MD" : "",
-               (mask & SWITCH_INT_BCS) ? " BCS" : "",
-               (mask & SWITCH_INT_PSC) ? " PSC" : "",
-               (mask & SWITCH_INT_ID) ? " ID" : "",
-               (mask & SWITCH_INT_W0TE) ? " W0TE" : "",
-               (mask & SWITCH_INT_W1TE) ? " W1TE" : "",
-               (mask & SWITCH_INT_RDE) ? " RDE" : "",
-               (mask & SWITCH_INT_SDE) ? " SDE" : "",
-               (mask & SWITCH_INT_CPUH) ? " CPUH" : "");
-}
-
-static void sw_dump_regs(void)
-{
-       u32 t;
-
-       t = sw_read_reg(SWITCH_REG_PHY_STATUS);
-       SW_DBG("phy_status: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       SW_DBG("cpup_conf: %08X%s%s%s\n", t,
-               (t & CPUP_CONF_DCPUP) ? " DCPUP" : "",
-               (t & CPUP_CONF_CRCP) ? " CRCP" : "",
-               (t & CPUP_CONF_BTM) ? " BTM" : "");
-
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       SW_DBG("port_conf0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PORT_CONF1);
-       SW_DBG("port_conf1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PORT_CONF2);
-       SW_DBG("port_conf2: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_VLAN_G1);
-       SW_DBG("vlan g1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_VLAN_G2);
-       SW_DBG("vlan g2: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_BW_CNTL0);
-       SW_DBG("bw_cntl0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_BW_CNTL1);
-       SW_DBG("bw_cntl1: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL0);
-       SW_DBG("phy_cntl0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL1);
-       SW_DBG("phy_cntl1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL2);
-       SW_DBG("phy_cntl2: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
-       SW_DBG("phy_cntl3: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL4);
-       SW_DBG("phy_cntl4: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_INT_STATUS);
-       sw_dump_intr_mask("int_status: ", t);
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       sw_dump_intr_mask("int_mask: ", t);
-
-       t = sw_read_reg(SWITCH_REG_SHDA);
-       SW_DBG("shda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_SLDA);
-       SW_DBG("slda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_RHDA);
-       SW_DBG("rhda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_RLDA);
-       SW_DBG("rlda: %08X\n", t);
-}
-#else
-static inline void sw_dump_desc(char *label, struct dma_desc *desc, int tx) {}
-static void sw_dump_intr_mask(char *label, u32 mask) {}
-static inline void sw_dump_regs(void) {}
-#endif /* CONFIG_ADM5120_SWITCH_DEBUG */
-
-/* ------------------------------------------------------------------------ */
-
-static inline void adm5120_rx_dma_update(struct dma_desc *desc,
-       struct sk_buff *skb, int end)
-{
-       desc->misc = 0;
-       desc->buf2 = 0;
-       desc->buflen = RX_MAX_PKTLEN;
-       desc->buf1 = DESC_ADDR(skb->data) |
-               DESC_OWN | (end ? DESC_EOR : 0);
-}
-
-static void adm5120_switch_rx_refill(void)
-{
-       unsigned int entry;
-
-       for (; cur_rxl - dirty_rxl > 0; dirty_rxl++) {
-               struct dma_desc *desc;
-               struct sk_buff *skb;
-
-               entry = dirty_rxl % RX_RING_SIZE;
-               desc = &rxl_descs[entry];
-
-               skb = rxl_skbuff[entry];
-               if (skb == NULL) {
-                       skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
-                       if (skb) {
-                               skb_reserve(skb, SKB_RESERVE_LEN);
-                               rxl_skbuff[entry] = skb;
-                       } else {
-                               SW_ERR("no memory for skb\n");
-                               desc->buflen = 0;
-                               desc->buf2 = 0;
-                               desc->misc = 0;
-                               desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN;
-                               break;
-                       }
-               }
-
-               desc->buf2 = 0;
-               desc->buflen = RX_MAX_PKTLEN;
-               desc->misc = 0;
-               desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN |
-                               DESC_ADDR(skb->data);
-       }
-}
-
-static int adm5120_switch_rx(int limit)
-{
-       unsigned int done = 0;
-
-       SW_DBG("rx start, limit=%d, cur_rxl=%u, dirty_rxl=%u\n",
-                               limit, cur_rxl, dirty_rxl);
-
-       while (done < limit) {
-               int entry = cur_rxl % RX_RING_SIZE;
-               struct dma_desc *desc = &rxl_descs[entry];
-               struct net_device *rdev;
-               unsigned int port;
-
-               if (desc->buf1 & DESC_OWN)
-                       break;
-
-               if (dirty_rxl + RX_RING_SIZE == cur_rxl)
-                       break;
-
-               port = desc_get_srcport(desc);
-               rdev = adm5120_port[port];
-
-               SW_DBG("rx descriptor %u, desc=%p, skb=%p\n", entry, desc,
-                               rxl_skbuff[entry]);
-
-               if ((rdev) && netif_running(rdev)) {
-                       struct sk_buff *skb = rxl_skbuff[entry];
-                       int pktlen;
-
-                       pktlen = desc_get_pktlen(desc);
-                       pktlen -= ETH_CSUM_LEN;
-
-                       if ((pktlen == 0) || desc_ipcsum_fail(desc)) {
-                               rdev->stats.rx_errors++;
-                               if (pktlen == 0)
-                                       rdev->stats.rx_length_errors++;
-                               if (desc_ipcsum_fail(desc))
-                                       rdev->stats.rx_crc_errors++;
-                               SW_DBG("rx error, recycling skb %u\n", entry);
-                       } else {
-                               skb_put(skb, pktlen);
-
-                               skb->dev = rdev;
-                               skb->protocol = eth_type_trans(skb, rdev);
-                               skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-                               dma_cache_wback_inv((unsigned long)skb->data,
-                                       skb->len);
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-                               netif_receive_skb(skb);
-#else
-                               netif_rx(skb);
-#endif
-
-                               rdev->last_rx = jiffies;
-                               rdev->stats.rx_packets++;
-                               rdev->stats.rx_bytes += pktlen;
-
-                               rxl_skbuff[entry] = NULL;
-                               done++;
-                       }
-               } else {
-                       SW_DBG("no rx device, recycling skb %u\n", entry);
-               }
-
-               cur_rxl++;
-               if (cur_rxl - dirty_rxl > RX_RING_SIZE / 4)
-                       adm5120_switch_rx_refill();
-       }
-
-       adm5120_switch_rx_refill();
-
-       SW_DBG("rx finished, cur_rxl=%u, dirty_rxl=%u, processed %d\n",
-                               cur_rxl, dirty_rxl, done);
-
-       return done;
-}
-
-static void adm5120_switch_tx(void)
-{
-       unsigned int entry;
-
-       spin_lock(&tx_lock);
-       entry = dirty_txl % TX_RING_SIZE;
-       while (dirty_txl != cur_txl) {
-               struct dma_desc *desc = &txl_descs[entry];
-               struct sk_buff *skb = txl_skbuff[entry];
-
-               if (desc->buf1 & DESC_OWN)
-                       break;
-
-               if (netif_running(skb->dev)) {
-                       skb->dev->stats.tx_bytes += skb->len;
-                       skb->dev->stats.tx_packets++;
-               }
-
-               dev_kfree_skb_irq(skb);
-               txl_skbuff[entry] = NULL;
-               entry = (++dirty_txl) % TX_RING_SIZE;
-       }
-
-       if ((cur_txl - dirty_txl) < TX_QUEUE_LEN - 4) {
-               int i;
-               for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-                       if (!adm5120_devs[i])
-                               continue;
-                       netif_wake_queue(adm5120_devs[i]);
-               }
-       }
-       spin_unlock(&tx_lock);
-}
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-static int adm5120_if_poll(struct napi_struct *napi, int limit)
-{
-       struct adm5120_if_priv *priv = container_of(napi,
-                               struct adm5120_if_priv, napi);
-       struct net_device *dev  __maybe_unused = priv->dev;
-       int done;
-       u32 status;
-
-       sw_int_ack(SWITCH_INTS_POLL);
-
-       SW_DBG("%s: processing TX ring\n", dev->name);
-       adm5120_switch_tx();
-
-       SW_DBG("%s: processing RX ring\n", dev->name);
-       done = adm5120_switch_rx(limit);
-
-       status = sw_int_status() & SWITCH_INTS_POLL;
-       if ((done < limit) && (!status)) {
-               SW_DBG("disable polling mode for %s\n", dev->name);
-               napi_complete(napi);
-               sw_int_unmask(SWITCH_INTS_POLL);
-               return 0;
-       }
-
-       SW_DBG("%s still in polling mode, done=%d, status=%x\n",
-                       dev->name, done, status);
-       return 1;
-}
-#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-
-
-static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
-{
-       u32 status;
-
-       status = sw_int_status();
-       status &= SWITCH_INTS_ALL;
-       if (!status)
-               return IRQ_NONE;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       sw_int_ack(status & ~SWITCH_INTS_POLL);
-
-       if (status & SWITCH_INTS_POLL) {
-               struct net_device *dev = dev_id;
-               struct adm5120_if_priv *priv = netdev_priv(dev);
-
-               sw_dump_intr_mask("poll ints", status);
-               SW_DBG("enable polling mode for %s\n", dev->name);
-               sw_int_mask(SWITCH_INTS_POLL);
-               napi_schedule(&priv->napi);
-       }
-#else
-       sw_int_ack(status);
-
-       if (status & (SWITCH_INT_RLD | SWITCH_INT_LDF))
-               adm5120_switch_rx(RX_RING_SIZE);
-
-       if (status & SWITCH_INT_SLD)
-               adm5120_switch_tx();
-#endif
-
-       return IRQ_HANDLED;
-}
-
-static void adm5120_set_bw(char *matrix)
-{
-       unsigned long val;
-
-       /* Port 0 to 3 are set using the bandwidth control 0 register */
-       val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-       sw_write_reg(SWITCH_REG_BW_CNTL0, val);
-
-       /* Port 4 and 5 are set using the bandwidth control 1 register */
-       val = matrix[4];
-       if (matrix[5] == 1)
-               sw_write_reg(SWITCH_REG_BW_CNTL1, val | 0x80000000);
-       else
-               sw_write_reg(SWITCH_REG_BW_CNTL1, val & ~0x8000000);
-
-       SW_DBG("D: ctl0 0x%ux, ctl1 0x%ux\n", sw_read_reg(SWITCH_REG_BW_CNTL0),
-               sw_read_reg(SWITCH_REG_BW_CNTL1));
-}
-
-static void adm5120_switch_tx_ring_reset(struct dma_desc *desc,
-               struct sk_buff **skbl, int num)
-{
-       memset(desc, 0, num * sizeof(*desc));
-       desc[num-1].buf1 |= DESC_EOR;
-       memset(skbl, 0, sizeof(struct skb *) * num);
-
-       cur_txl = 0;
-       dirty_txl = 0;
-}
-
-static void adm5120_switch_rx_ring_reset(struct dma_desc *desc,
-               struct sk_buff **skbl, int num)
-{
-       int i;
-
-       memset(desc, 0, num * sizeof(*desc));
-       for (i = 0; i < num; i++) {
-               skbl[i] = dev_alloc_skb(SKB_ALLOC_LEN);
-               if (!skbl[i]) {
-                       i = num;
-                       break;
-               }
-               skb_reserve(skbl[i], SKB_RESERVE_LEN);
-               adm5120_rx_dma_update(&desc[i], skbl[i], (num - 1 == i));
-       }
-
-       cur_rxl = 0;
-       dirty_rxl = 0;
-}
-
-static int adm5120_switch_tx_ring_alloc(void)
-{
-       int err;
-
-       txl_descs = dma_alloc_coherent(NULL, TX_DESCS_SIZE, &txl_descs_dma,
-                                       GFP_ATOMIC);
-       if (!txl_descs) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       txl_skbuff = kzalloc(TX_SKBS_SIZE, GFP_KERNEL);
-       if (!txl_skbuff) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       return 0;
-
-err:
-       return err;
-}
-
-static void adm5120_switch_tx_ring_free(void)
-{
-       int i;
-
-       if (txl_skbuff) {
-               for (i = 0; i < TX_RING_SIZE; i++)
-                       if (txl_skbuff[i])
-                               kfree_skb(txl_skbuff[i]);
-               kfree(txl_skbuff);
-       }
-
-       if (txl_descs)
-               dma_free_coherent(NULL, TX_DESCS_SIZE, txl_descs,
-                       txl_descs_dma);
-}
-
-static int adm5120_switch_rx_ring_alloc(void)
-{
-       int err;
-       int i;
-
-       /* init RX ring */
-       rxl_descs = dma_alloc_coherent(NULL, RX_DESCS_SIZE, &rxl_descs_dma,
-                                       GFP_ATOMIC);
-       if (!rxl_descs) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       rxl_skbuff = kzalloc(RX_SKBS_SIZE, GFP_KERNEL);
-       if (!rxl_skbuff) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       for (i = 0; i < RX_RING_SIZE; i++) {
-               struct sk_buff *skb;
-               skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
-               if (!skb) {
-                       err = -ENOMEM;
-                       goto err;
-               }
-               rxl_skbuff[i] = skb;
-               skb_reserve(skb, SKB_RESERVE_LEN);
-       }
-
-       return 0;
-
-err:
-       return err;
-}
-
-static void adm5120_switch_rx_ring_free(void)
-{
-       int i;
-
-       if (rxl_skbuff) {
-               for (i = 0; i < RX_RING_SIZE; i++)
-                       if (rxl_skbuff[i])
-                               kfree_skb(rxl_skbuff[i]);
-               kfree(rxl_skbuff);
-       }
-
-       if (rxl_descs)
-               dma_free_coherent(NULL, RX_DESCS_SIZE, rxl_descs,
-                       rxl_descs_dma);
-}
-
-static void adm5120_write_mac(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       unsigned char *mac = dev->dev_addr;
-       u32 t;
-
-       t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) |
-               (mac[4] << MAC_WT1_MAC4_SHIFT) | (mac[5] << MAC_WT1_MAC5_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT1, t);
-
-       t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
-               MAC_WT0_MAWC | MAC_WT0_WVE | (priv->vlan_no<<3);
-
-       sw_write_reg(SWITCH_REG_MAC_WT0, t);
-
-       while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD))
-               ;
-}
-
-static void adm5120_set_vlan(char *matrix)
-{
-       unsigned long val;
-       int vlan_port, port;
-
-       val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-       sw_write_reg(SWITCH_REG_VLAN_G1, val);
-       val = matrix[4] + (matrix[5]<<8);
-       sw_write_reg(SWITCH_REG_VLAN_G2, val);
-
-       /* Now set/update the port vs. device lookup table */
-       for (port = 0; port < SWITCH_NUM_PORTS; port++) {
-               for (vlan_port = 0; vlan_port < SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++)
-                       ;
-               if (vlan_port < SWITCH_NUM_PORTS)
-                       adm5120_port[port] = adm5120_devs[vlan_port];
-               else
-                       adm5120_port[port] = NULL;
-       }
-}
-
-static void adm5120_switch_set_vlan_mac(unsigned int vlan, unsigned char *mac)
-{
-       u32 t;
-
-       t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT)
-               | (mac[4] << MAC_WT1_MAC4_SHIFT)
-               | (mac[5] << MAC_WT1_MAC5_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT1, t);
-
-       t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
-               MAC_WT0_MAWC | MAC_WT0_WVE | (vlan << MAC_WT0_WVN_SHIFT) |
-               (MAC_WT0_WAF_STATIC << MAC_WT0_WAF_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT0, t);
-
-       do {
-               t = sw_read_reg(SWITCH_REG_MAC_WT0);
-       } while ((t & MAC_WT0_MWD) == 0);
-}
-
-static void adm5120_switch_set_vlan_ports(unsigned int vlan, u32 ports)
-{
-       unsigned int reg;
-       u32 t;
-
-       if (vlan < 4)
-               reg = SWITCH_REG_VLAN_G1;
-       else {
-               vlan -= 4;
-               reg = SWITCH_REG_VLAN_G2;
-       }
-
-       t = sw_read_reg(reg);
-       t &= ~(0xFF << (vlan*8));
-       t |= (ports << (vlan*8));
-       sw_write_reg(reg, t);
-}
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-static inline void adm5120_if_napi_enable(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       napi_enable(&priv->napi);
-}
-
-static inline void adm5120_if_napi_disable(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       napi_disable(&priv->napi);
-}
-#else
-static inline void adm5120_if_napi_enable(struct net_device *dev) {}
-static inline void adm5120_if_napi_disable(struct net_device *dev) {}
-#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-
-static int adm5120_if_open(struct net_device *dev)
-{
-       u32 t;
-       int err;
-       int i;
-
-       adm5120_if_napi_enable(dev);
-
-       err = request_irq(dev->irq, adm5120_switch_irq, IRQF_SHARED,
-                         dev->name, dev);
-       if (err) {
-               SW_ERR("unable to get irq for %s\n", dev->name);
-               goto err;
-       }
-
-       if (!sw_used++)
-               /* enable interrupts on first open */
-               sw_int_unmask(SWITCH_INTS_USED);
-
-       /* enable (additional) port */
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               if (dev == adm5120_devs[i])
-                       t &= ~adm5120_eth_vlans[i];
-       }
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       netif_start_queue(dev);
-
-       return 0;
-
-err:
-       adm5120_if_napi_disable(dev);
-       return err;
-}
-
-static int adm5120_if_stop(struct net_device *dev)
-{
-       u32 t;
-       int i;
-
-       netif_stop_queue(dev);
-       adm5120_if_napi_disable(dev);
-
-       /* disable port if not assigned to other devices */
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       t |= SWITCH_PORTS_NOCPU;
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
-                       t &= ~adm5120_eth_vlans[i];
-       }
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       if (!--sw_used)
-               sw_int_mask(SWITCH_INTS_USED);
-
-       free_irq(dev->irq, dev);
-
-       return 0;
-}
-
-static int adm5120_if_hard_start_xmit(struct sk_buff *skb,
-               struct net_device *dev)
-{
-       struct dma_desc *desc;
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       unsigned int entry;
-       unsigned long data;
-       int i;
-
-       /* lock switch irq */
-       spin_lock_irq(&tx_lock);
-
-       /* calculate the next TX descriptor entry. */
-       entry = cur_txl % TX_RING_SIZE;
-
-       desc = &txl_descs[entry];
-       if (desc->buf1 & DESC_OWN) {
-               /* We want to write a packet but the TX queue is still
-                * occupied by the DMA. We are faster than the DMA... */
-               SW_DBG("%s unable to transmit, packet dopped\n", dev->name);
-               dev_kfree_skb(skb);
-               dev->stats.tx_dropped++;
-               return 0;
-       }
-
-       txl_skbuff[entry] = skb;
-       data = (desc->buf1 & DESC_EOR);
-       data |= DESC_ADDR(skb->data);
-
-       desc->misc =
-           ((skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len) << DESC_PKTLEN_SHIFT) |
-           (0x1 << priv->vlan_no);
-
-       desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-
-       desc->buf1 = data | DESC_OWN;
-       sw_write_reg(SWITCH_REG_SEND_TRIG, SEND_TRIG_STL);
-
-       cur_txl++;
-       if (cur_txl == dirty_txl + TX_QUEUE_LEN) {
-               for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-                       if (!adm5120_devs[i])
-                               continue;
-                       netif_stop_queue(adm5120_devs[i]);
-               }
-       }
-
-       dev->trans_start = jiffies;
-
-       spin_unlock_irq(&tx_lock);
-
-       return 0;
-}
-
-static void adm5120_if_tx_timeout(struct net_device *dev)
-{
-       SW_INFO("TX timeout on %s\n", dev->name);
-}
-
-static void adm5120_if_set_rx_mode(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       u32 ports;
-       u32 t;
-
-       ports = adm5120_eth_vlans[priv->vlan_no] & SWITCH_PORTS_NOCPU;
-
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       if (dev->flags & IFF_PROMISC)
-               /* enable unknown packets */
-               t &= ~(ports << CPUP_CONF_DUNP_SHIFT);
-       else
-               /* disable unknown packets */
-               t |= (ports << CPUP_CONF_DUNP_SHIFT);
-
-       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
-                                       netdev_mc_count(dev))
-               /* enable multicast packets */
-               t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
-       else
-               /* disable multicast packets */
-               t |= (ports << CPUP_CONF_DMCP_SHIFT);
-
-       /* If there is any port configured to be in promiscuous mode, then the */
-       /* Bridge Test Mode has to be activated. This will result in           */
-       /* transporting also packets learned in another VLAN to be forwarded   */
-       /* to the CPU.                                                         */
-       /* The difficult scenario is when we want to build a bridge on the CPU.*/
-       /* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
-       /* CPU port in VLAN1. Now we build a bridge on the CPU between         */
-       /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
-       /* Now assume a packet with ethernet source address 99 enters port 0   */
-       /* It will be forwarded to the CPU because it is unknown. Then the     */
-       /* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
-       /* When now a packet with ethernet destination address 99 comes in at  */
-       /* port 1 in VLAN1, then the switch has learned that this address is   */
-       /* located at port 0 in VLAN0. Therefore the switch will drop          */
-       /* this packet. In order to avoid this and to send the packet still    */
-       /* to the CPU, the Bridge Test Mode has to be activated.               */
-
-       /* Check if there is any vlan in promisc mode. */
-       if (~t & (SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT))
-               t |= CPUP_CONF_BTM;  /* Enable Bridge Testing Mode */
-       else
-               t &= ~CPUP_CONF_BTM; /* Disable Bridge Testing Mode */
-
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-}
-
-static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
-{
-       int ret;
-
-       ret = eth_mac_addr(dev, p);
-       if (ret)
-               return ret;
-
-       adm5120_write_mac(dev);
-       return 0;
-}
-
-static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
-               int cmd)
-{
-       int err;
-       struct adm5120_sw_info info;
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-
-       switch (cmd) {
-       case SIOCGADMINFO:
-               info.magic = 0x5120;
-               info.ports = adm5120_nrdevs;
-               info.vlan = priv->vlan_no;
-               err = copy_to_user(rq->ifr_data, &info, sizeof(info));
-               if (err)
-                       return -EFAULT;
-               break;
-       case SIOCSMATRIX:
-               if (!capable(CAP_NET_ADMIN))
-                       return -EPERM;
-               err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
-                                       sizeof(adm5120_eth_vlans));
-               if (err)
-                       return -EFAULT;
-               adm5120_set_vlan(adm5120_eth_vlans);
-               break;
-       case SIOCGMATRIX:
-               err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
-                                       sizeof(adm5120_eth_vlans));
-               if (err)
-                       return -EFAULT;
-               break;
-       default:
-               return -EOPNOTSUPP;
-       }
-       return 0;
-}
-
-static const struct net_device_ops adm5120sw_netdev_ops = {
-       .ndo_open               = adm5120_if_open,
-       .ndo_stop               = adm5120_if_stop,
-       .ndo_start_xmit         = adm5120_if_hard_start_xmit,
-       .ndo_set_rx_mode        = adm5120_if_set_rx_mode,
-       .ndo_do_ioctl           = adm5120_if_do_ioctl,
-       .ndo_tx_timeout         = adm5120_if_tx_timeout,
-       .ndo_validate_addr      = eth_validate_addr,
-       .ndo_change_mtu         = eth_change_mtu,
-       .ndo_set_mac_address    = adm5120_if_set_mac_address,
-};
-
-static struct net_device *adm5120_if_alloc(void)
-{
-       struct net_device *dev;
-       struct adm5120_if_priv *priv;
-
-       dev = alloc_etherdev(sizeof(*priv));
-       if (!dev)
-               return NULL;
-
-       priv = netdev_priv(dev);
-       priv->dev = dev;
-
-       dev->irq                = ADM5120_IRQ_SWITCH;
-       dev->netdev_ops         = &adm5120sw_netdev_ops;
-       dev->watchdog_timeo     = TX_TIMEOUT;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);
-#endif
-
-       return dev;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static void adm5120_switch_cleanup(void)
-{
-       int i;
-
-       /* disable interrupts */
-       sw_int_mask(SWITCH_INTS_ALL);
-
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               struct net_device *dev = adm5120_devs[i];
-               if (dev) {
-                       unregister_netdev(dev);
-                       free_netdev(dev);
-               }
-       }
-
-       adm5120_switch_tx_ring_free();
-       adm5120_switch_rx_ring_free();
-}
-
-static int adm5120_switch_probe(struct platform_device *pdev)
-{
-       u32 t;
-       int i, err;
-
-       adm5120_nrdevs = adm5120_eth_num_ports;
-
-       t = CPUP_CONF_DCPUP | CPUP_CONF_CRCP |
-               SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT |
-               SWITCH_PORTS_NOCPU << CPUP_CONF_DMCP_SHIFT ;
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-       t = (SWITCH_PORTS_NOCPU << PORT_CONF0_EMCP_SHIFT) |
-               (SWITCH_PORTS_NOCPU << PORT_CONF0_BP_SHIFT) |
-               (SWITCH_PORTS_NOCPU);
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       /* setup ports to Autoneg/100M/Full duplex/Auto MDIX */
-       t =  SWITCH_PORTS_PHY |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_SC_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_DC_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) |
-               PHY_CNTL2_RMAE;
-       sw_write_reg(SWITCH_REG_PHY_CNTL2, t);
-
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
-       t |= PHY_CNTL3_RNT;
-       sw_write_reg(SWITCH_REG_PHY_CNTL3, t);
-
-       /* Force all the packets from all ports are low priority */
-       sw_write_reg(SWITCH_REG_PRI_CNTL, 0);
-
-       sw_int_mask(SWITCH_INTS_ALL);
-       sw_int_ack(SWITCH_INTS_ALL);
-
-       err = adm5120_switch_rx_ring_alloc();
-       if (err)
-               goto err;
-
-       err = adm5120_switch_tx_ring_alloc();
-       if (err)
-               goto err;
-
-       adm5120_switch_tx_ring_reset(txl_descs, txl_skbuff, TX_RING_SIZE);
-       adm5120_switch_rx_ring_reset(rxl_descs, rxl_skbuff, RX_RING_SIZE);
-
-       sw_write_reg(SWITCH_REG_SHDA, 0);
-       sw_write_reg(SWITCH_REG_SLDA, KSEG1ADDR(txl_descs));
-       sw_write_reg(SWITCH_REG_RHDA, 0);
-       sw_write_reg(SWITCH_REG_RLDA, KSEG1ADDR(rxl_descs));
-
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               struct net_device *dev;
-               struct adm5120_if_priv *priv;
-
-               dev = adm5120_if_alloc();
-               if (!dev) {
-                       err = -ENOMEM;
-                       goto err;
-               }
-
-               adm5120_devs[i] = dev;
-               priv = netdev_priv(dev);
-
-               priv->vlan_no = i;
-               priv->port_mask = adm5120_eth_vlans[i];
-
-               memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
-               adm5120_write_mac(dev);
-
-               err = register_netdev(dev);
-               if (err) {
-                       SW_INFO("%s register failed, error=%d\n",
-                                       dev->name, err);
-                       goto err;
-               }
-       }
-
-       /* setup vlan/port mapping after devs are filled up */
-       adm5120_set_vlan(adm5120_eth_vlans);
-
-       /* enable CPU port */
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       t &= ~CPUP_CONF_DCPUP;
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-       return 0;
-
-err:
-       adm5120_switch_cleanup();
-
-       SW_ERR("init failed\n");
-       return err;
-}
-
-static int adm5120_switch_remove(struct platform_device *pdev)
-{
-       adm5120_switch_cleanup();
-       return 0;
-}
-
-static struct platform_driver adm5120_switch_driver = {
-       .probe          = adm5120_switch_probe,
-       .remove         = adm5120_switch_remove,
-       .driver         = {
-               .name   = DRV_NAME,
-       },
-};
-
-/* -------------------------------------------------------------------------- */
-
-static int __init adm5120_switch_mod_init(void)
-{
-       int err;
-
-       pr_info(DRV_DESC " version " DRV_VERSION "\n");
-       err = platform_driver_register(&adm5120_switch_driver);
-
-       return err;
-}
-
-static void __exit adm5120_switch_mod_exit(void)
-{
-       platform_driver_unregister(&adm5120_switch_driver);
-}
-
-module_init(adm5120_switch_mod_init);
-module_exit(adm5120_switch_mod_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
diff --git a/target/linux/adm5120/files-3.14/drivers/net/adm5120sw.h b/target/linux/adm5120/files-3.14/drivers/net/adm5120sw.h
deleted file mode 100644 (file)
index fa9e503..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *     Defines for ADM5120 built in ethernet switch driver
- *
- *     Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *
- *     Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
- *     Copyright ADMtek Inc.
- */
-
-#ifndef _INCLUDE_ADM5120SW_H_
-#define _INCLUDE_ADM5120SW_H_
-
-#define SIOCSMATRIX    SIOCDEVPRIVATE
-#define SIOCGMATRIX    (SIOCDEVPRIVATE + 1)
-#define SIOCGADMINFO   (SIOCDEVPRIVATE + 2)
-
-struct adm5120_sw_info {
-       u16     magic;
-       u16     ports;
-       u16     vlan;
-};
-
-#endif /* _INCLUDE_ADM5120SW_H_ */
diff --git a/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-dbg.c b/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-dbg.c
deleted file mode 100644 (file)
index 2d5dc2a..0000000
+++ /dev/null
@@ -1,836 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-dbg.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-static inline char *ed_typestring(int ed_type)
-{
-       switch (ed_type) {
-       case PIPE_CONTROL:
-               return "ctrl";
-       case PIPE_BULK:
-               return "bulk";
-       case PIPE_INTERRUPT:
-               return "intr";
-       case PIPE_ISOCHRONOUS:
-               return "isoc";
-       }
-       return "(bad ed_type)";
-}
-
-static inline char *ed_statestring(int state)
-{
-       switch (state) {
-       case ED_IDLE:
-               return "IDLE";
-       case ED_UNLINK:
-               return "UNLINK";
-       case ED_OPER:
-               return "OPER";
-       }
-       return "?STATE";
-}
-
-static inline char *pipestring(int pipe)
-{
-       return ed_typestring(usb_pipetype(pipe));
-}
-
-static inline char *td_pidstring(u32 info)
-{
-       switch (info & TD_DP) {
-       case TD_DP_SETUP:
-               return "SETUP";
-       case TD_DP_IN:
-               return "IN";
-       case TD_DP_OUT:
-               return "OUT";
-       }
-       return "?PID";
-}
-
-static inline char *td_togglestring(u32 info)
-{
-       switch (info & TD_T) {
-       case TD_T_DATA0:
-               return "DATA0";
-       case TD_T_DATA1:
-               return "DATA1";
-       case TD_T_CARRY:
-               return "CARRY";
-       }
-       return "?TOGGLE";
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header
- */
-static void __attribute__((unused))
-urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status)
-{
-       unsigned int pipe = urb->pipe;
-
-       if (!urb->dev || !urb->dev->bus) {
-               admhc_dbg(ahcd, "%s URB: no dev", str);
-               return;
-       }
-
-#ifndef        ADMHC_VERBOSE_DEBUG
-       if (status != 0)
-#endif
-       admhc_dbg(ahcd, "URB-%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d "
-                       "stat=%d\n",
-                       str,
-                       urb,
-                       usb_pipedevice(pipe),
-                       usb_pipeendpoint(pipe),
-                       usb_pipeout(pipe) ? "out" : "in",
-                       pipestring(pipe),
-                       urb->transfer_flags,
-                       urb->actual_length,
-                       urb->transfer_buffer_length,
-                       status);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       if (!small) {
-               int i, len;
-
-               if (usb_pipecontrol(pipe)) {
-                       admhc_dbg(ahcd, "setup(8):");
-                       for (i = 0; i < 8 ; i++)
-                               printk(KERN_INFO" %02x", ((__u8 *)urb->setup_packet)[i]);
-                       printk(KERN_INFO "\n");
-               }
-               if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) {
-                       admhc_dbg(ahcd, "data(%d/%d):",
-                               urb->actual_length,
-                               urb->transfer_buffer_length);
-                       len = usb_pipeout(pipe) ?
-                                               urb->transfer_buffer_length : urb->actual_length;
-                       for (i = 0; i < 16 && i < len; i++)
-                               printk(KERN_INFO " %02x", ((__u8 *)urb->transfer_buffer)[i]);
-                       printk(KERN_INFO "%s stat:%d\n", i < len ? "..." : "", status);
-               }
-       }
-#endif /* ADMHC_VERBOSE_DEBUG */
-}
-
-#define admhc_dbg_sw(ahcd, next, size, format, arg...) \
-       do { \
-               if (next) { \
-                       unsigned s_len; \
-                       s_len = scnprintf(*next, *size, format, ## arg); \
-                       *size -= s_len; *next += s_len; \
-               } else \
-                       admhc_dbg(ahcd, format, ## arg); \
-       } while (0);
-
-
-static void admhc_dump_intr_mask(struct admhcd *ahcd, char *label, u32 mask,
-               char **next, unsigned *size)
-{
-       admhc_dbg_sw(ahcd, next, size, "%s 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n",
-               label,
-               mask,
-               (mask & ADMHC_INTR_INTA) ? " INTA" : "",
-               (mask & ADMHC_INTR_FATI) ? " FATI" : "",
-               (mask & ADMHC_INTR_SWI) ? " SWI" : "",
-               (mask & ADMHC_INTR_TDC) ? " TDC" : "",
-               (mask & ADMHC_INTR_FNO) ? " FNO" : "",
-               (mask & ADMHC_INTR_SO) ? " SO" : "",
-               (mask & ADMHC_INTR_INSM) ? " INSM" : "",
-               (mask & ADMHC_INTR_BABI) ? " BABI" : "",
-               (mask & ADMHC_INTR_7) ? " !7!" : "",
-               (mask & ADMHC_INTR_6) ? " !6!" : "",
-               (mask & ADMHC_INTR_RESI) ? " RESI" : "",
-               (mask & ADMHC_INTR_SOFI) ? " SOFI" : ""
-               );
-}
-
-static void maybe_print_eds(struct admhcd *ahcd, char *label, u32 value,
-               char **next, unsigned *size)
-{
-       if (value)
-               admhc_dbg_sw(ahcd, next, size, "%s %08x\n", label, value);
-}
-
-static char *buss2string(int state)
-{
-       switch (state) {
-       case ADMHC_BUSS_RESET:
-               return "reset";
-       case ADMHC_BUSS_RESUME:
-               return "resume";
-       case ADMHC_BUSS_OPER:
-               return "operational";
-       case ADMHC_BUSS_SUSPEND:
-               return "suspend";
-       }
-       return "?state";
-}
-
-static void
-admhc_dump_status(struct admhcd *ahcd, char **next, unsigned *size)
-{
-       struct admhcd_regs __iomem *regs = ahcd->regs;
-       u32                     temp;
-
-       temp = admhc_readl(ahcd, &regs->gencontrol);
-       admhc_dbg_sw(ahcd, next, size,
-               "gencontrol 0x%08x%s%s%s%s\n",
-               temp,
-               (temp & ADMHC_CTRL_UHFE) ? " UHFE" : "",
-               (temp & ADMHC_CTRL_SIR) ? " SIR" : "",
-               (temp & ADMHC_CTRL_DMAA) ? " DMAA" : "",
-               (temp & ADMHC_CTRL_SR) ? " SR" : ""
-               );
-
-       temp = admhc_readl(ahcd, &regs->host_control);
-       admhc_dbg_sw(ahcd, next, size,
-               "host_control 0x%08x BUSS=%s%s\n",
-               temp,
-               buss2string(temp & ADMHC_HC_BUSS),
-               (temp & ADMHC_HC_DMAE) ? " DMAE" : ""
-               );
-
-       admhc_dump_intr_mask(ahcd, "int_status",
-                       admhc_readl(ahcd, &regs->int_status),
-                       next, size);
-       admhc_dump_intr_mask(ahcd, "int_enable",
-                       admhc_readl(ahcd, &regs->int_enable),
-                       next, size);
-
-       maybe_print_eds(ahcd, "hosthead",
-                       admhc_readl(ahcd, &regs->hosthead), next, size);
-}
-
-#define dbg_port_sw(hc, num, value, next, size) \
-       admhc_dbg_sw(hc, next, size, \
-               "portstatus [%d] " \
-               "0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               num, temp, \
-               (temp & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (temp & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (temp & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (temp & ADMHC_PS_PESC) ? " PESC" : "", \
-               (temp & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (temp & ADMHC_PS_LSDA) ? " LSDA" : "", \
-               (temp & ADMHC_PS_PPS) ? " PPS" : "", \
-               (temp & ADMHC_PS_PRS) ? " PRS" : "", \
-               (temp & ADMHC_PS_POCI) ? " POCI" : "", \
-               (temp & ADMHC_PS_PSS) ? " PSS" : "", \
-               \
-               (temp & ADMHC_PS_PES) ? " PES" : "", \
-               (temp & ADMHC_PS_CCS) ? " CCS" : "" \
-               );
-
-
-static void
-admhc_dump_roothub(
-       struct admhcd *ahcd,
-       int verbose,
-       char **next,
-       unsigned *size)
-{
-       u32                     temp, i;
-
-       temp = admhc_read_rhdesc(ahcd);
-       if (temp == ~(u32)0)
-               return;
-
-       if (verbose) {
-               admhc_dbg_sw(ahcd, next, size,
-                       "rhdesc %08x%s%s%s%s%s%s PPCM=%02x%s%s%s%s NUMP=%d(%d)\n",
-                       temp,
-                       (temp & ADMHC_RH_CRWE) ? " CRWE" : "",
-                       (temp & ADMHC_RH_OCIC) ? " OCIC" : "",
-                       (temp & ADMHC_RH_LPSC) ? " LPSC" : "",
-                       (temp & ADMHC_RH_LPSC) ? " DRWE" : "",
-                       (temp & ADMHC_RH_LPSC) ? " OCI" : "",
-                       (temp & ADMHC_RH_LPSC) ? " LPS" : "",
-                       ((temp & ADMHC_RH_PPCM) >> 16),
-                       (temp & ADMHC_RH_NOCP) ? " NOCP" : "",
-                       (temp & ADMHC_RH_OCPM) ? " OCPM" : "",
-                       (temp & ADMHC_RH_NPS) ? " NPS" : "",
-                       (temp & ADMHC_RH_PSM) ? " PSM" : "",
-                       (temp & ADMHC_RH_NUMP), ahcd->num_ports
-                       );
-       }
-
-       for (i = 0; i < ahcd->num_ports; i++) {
-               temp = admhc_read_portstatus(ahcd, i);
-               dbg_port_sw(ahcd, i, temp, next, size);
-       }
-}
-
-static void admhc_dump(struct admhcd *ahcd, int verbose)
-{
-       admhc_dbg(ahcd, "ADMHC ahcd state\n");
-
-       /* dumps some of the state we know about */
-       admhc_dump_status(ahcd, NULL, NULL);
-       admhc_dbg(ahcd, "current frame #%04x\n",
-               admhc_frame_no(ahcd));
-
-       admhc_dump_roothub(ahcd, verbose, NULL, NULL);
-}
-
-static const char data0[] = "DATA0";
-static const char data1[] = "DATA1";
-
-static void admhc_dump_td(const struct admhcd *ahcd, const char *label,
-               const struct td *td)
-{
-       u32     tmp;
-
-       admhc_dbg(ahcd, "%s td %p; urb %p index %d; hwNextTD %08x\n",
-               label, td,
-               td->urb, td->index,
-               hc32_to_cpup(ahcd, &td->hwNextTD));
-
-       tmp = hc32_to_cpup(ahcd, &td->hwINFO);
-       admhc_dbg(ahcd, "     status %08x%s CC=%x EC=%d %s %s ISI=%x FN=%x\n",
-               tmp,
-               (tmp & TD_OWN) ? " OWN" : "",
-               TD_CC_GET(tmp),
-               TD_EC_GET(tmp),
-               td_togglestring(tmp),
-               td_pidstring(tmp),
-               TD_ISI_GET(tmp),
-               TD_FN_GET(tmp));
-
-       tmp = hc32_to_cpup(ahcd, &td->hwCBL);
-       admhc_dbg(ahcd, "     dbp %08x; cbl %08x; LEN=%d%s\n",
-               hc32_to_cpup(ahcd, &td->hwDBP),
-               tmp,
-               TD_BL_GET(tmp),
-               (tmp & TD_IE) ? " IE" : "");
-}
-
-/* caller MUST own hcd spinlock if verbose is set! */
-static void __attribute__((unused))
-admhc_dump_ed(const struct admhcd *ahcd, const char *label,
-               const struct ed *ed, int verbose)
-{
-       u32 tmp = hc32_to_cpu(ahcd, ed->hwINFO);
-
-       admhc_dbg(ahcd, "%s ed %p %s type %s; next ed %08x\n",
-               label,
-               ed, ed_statestring(ed->state), ed_typestring(ed->type),
-               hc32_to_cpup(ahcd, &ed->hwNextED));
-
-       admhc_dbg(ahcd, "  info %08x MAX=%d%s%s%s%s EP=%d DEV=%d\n", tmp,
-               ED_MPS_GET(tmp),
-               (tmp & ED_ISO) ? " ISO" : "",
-               (tmp & ED_SKIP) ? " SKIP" : "",
-               (tmp & ED_SPEED_FULL) ? " FULL" : " LOW",
-               (tmp & ED_INT) ? " INT" : "",
-               ED_EN_GET(tmp),
-               ED_FA_GET(tmp));
-
-       tmp = hc32_to_cpup(ahcd, &ed->hwHeadP);
-       admhc_dbg(ahcd, "  tds: head %08x tail %08x %s%s%s\n",
-               tmp & TD_MASK,
-               hc32_to_cpup(ahcd, &ed->hwTailP),
-               (tmp & ED_C) ? data1 : data0,
-               (tmp & ED_H) ? " HALT" : "",
-               verbose ? " td list follows" : " (not listing)");
-
-       if (verbose) {
-               struct list_head        *tmp;
-
-               /* use ed->td_list because HC concurrently modifies
-                * hwNextTD as it accumulates ed_donelist.
-                */
-               list_for_each(tmp, &ed->td_list) {
-                       struct td               *td;
-                       td = list_entry(tmp, struct td, td_list);
-                       admhc_dump_td(ahcd, "  ->", td);
-               }
-       }
-}
-
-#else /* ifdef DEBUG */
-
-static inline void urb_print(struct admhcd *ahcd, struct urb * urb, char * str,
-       int small, int status) {}
-static inline void admhc_dump_ed(const struct admhcd *ahcd, const char *label,
-       const struct ed *ed, int verbose) {}
-static inline void admhc_dump_td(const struct admhcd *ahcd, const char *label,
-       const struct td *td) {}
-static inline void admhc_dump(struct admhcd *ahcd, int verbose) {}
-
-#undef ADMHC_VERBOSE_DEBUG
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef STUB_DEBUG_FILES
-
-static inline void create_debug_files(struct admhcd *bus) { }
-static inline void remove_debug_files(struct admhcd *bus) { }
-
-#else
-
-static int debug_async_open(struct inode *, struct file *);
-static int debug_periodic_open(struct inode *, struct file *);
-static int debug_registers_open(struct inode *, struct file *);
-static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
-static int debug_close(struct inode *, struct file *);
-
-static const struct file_operations debug_async_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_async_open,
-       .read           = debug_output,
-       .release        = debug_close,
-       .llseek         = default_llseek,
-};
-static const struct file_operations debug_periodic_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_periodic_open,
-       .read           = debug_output,
-       .release        = debug_close,
-       .llseek         = default_llseek,
-};
-static const struct file_operations debug_registers_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_registers_open,
-       .read           = debug_output,
-       .release        = debug_close,
-       .llseek         = default_llseek,
-};
-
-static struct dentry *admhc_debug_root;
-
-struct debug_buffer {
-       ssize_t (*fill_func)(struct debug_buffer *);    /* fill method */
-       struct admhcd *ahcd;
-       struct mutex mutex;     /* protect filling of buffer */
-       size_t count;           /* number of characters filled into buffer */
-       char *page;
-};
-
-static ssize_t
-show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
-{
-       unsigned temp;
-       unsigned size = count;
-
-       if (!ed)
-               return 0;
-
-       /* dump a snapshot of the bulk or control schedule */
-       while (ed) {
-               u32 info = hc32_to_cpu(ahcd, ed->hwINFO);
-               u32 headp = hc32_to_cpu(ahcd, ed->hwHeadP);
-               u32 tailp = hc32_to_cpu(ahcd, ed->hwTailP);
-               struct list_head *entry;
-               struct td       *td;
-
-               temp = scnprintf(buf, size,
-                       "ed/%p %s %s %cs dev%d ep%d %s%smax %d %08x%s%s %s"
-                       " h:%08x t:%08x",
-                       ed,
-                       ed_statestring(ed->state),
-                       ed_typestring(ed->type),
-                       (info & ED_SPEED_FULL) ? 'f' : 'l',
-                       info & ED_FA_MASK,
-                       (info >> ED_EN_SHIFT) & ED_EN_MASK,
-                       (info & ED_INT) ? "INT " : "",
-                       (info & ED_ISO) ? "ISO " : "",
-                       (info >> ED_MPS_SHIFT) & ED_MPS_MASK ,
-                       info,
-                       (info & ED_SKIP) ? " S" : "",
-                       (headp & ED_H) ? " H" : "",
-                       (headp & ED_C) ? data1 : data0,
-                       headp & ED_MASK, tailp);
-               size -= temp;
-               buf += temp;
-
-               list_for_each(entry, &ed->td_list) {
-                       u32             dbp, cbl;
-
-                       td = list_entry(entry, struct td, td_list);
-                       info = hc32_to_cpup(ahcd, &td->hwINFO);
-                       dbp = hc32_to_cpup(ahcd, &td->hwDBP);
-                       cbl = hc32_to_cpup(ahcd, &td->hwCBL);
-
-                       temp = scnprintf(buf, size,
-                               "\n\ttd/%p %s %d %s%scc=%x urb %p (%08x,%08x)",
-                               td,
-                               td_pidstring(info),
-                               TD_BL_GET(cbl),
-                               (info & TD_OWN) ? "" : "DONE ",
-                               (cbl & TD_IE) ? "IE " : "",
-                               TD_CC_GET(info), td->urb, info, cbl);
-                       size -= temp;
-                       buf += temp;
-               }
-
-               temp = scnprintf(buf, size, "\n");
-               size -= temp;
-               buf += temp;
-
-               ed = ed->ed_next;
-       }
-
-       return count - size;
-}
-
-static ssize_t fill_async_buffer(struct debug_buffer *buf)
-{
-       struct admhcd           *ahcd;
-       size_t                  temp;
-       unsigned long           flags;
-
-       ahcd = buf->ahcd;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return temp;
-}
-
-
-#define DBG_SCHED_LIMIT 64
-
-static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
-{
-       struct admhcd           *ahcd;
-       struct ed               **seen, *ed;
-       unsigned long           flags;
-       unsigned                temp, size, seen_count;
-       char                    *next;
-       unsigned                i;
-
-       seen = kmalloc(DBG_SCHED_LIMIT * sizeof(*seen), GFP_ATOMIC);
-       if (!seen)
-               return 0;
-       seen_count = 0;
-
-       ahcd = buf->ahcd;
-       next = buf->page;
-       size = PAGE_SIZE;
-
-       temp = scnprintf(next, size, "size = %d\n", NUM_INTS);
-       size -= temp;
-       next += temp;
-
-       /* dump a snapshot of the periodic schedule (and load) */
-       spin_lock_irqsave(&ahcd->lock, flags);
-       for (i = 0; i < NUM_INTS; i++) {
-               ed = ahcd->periodic[i];
-               if (!ed)
-                       continue;
-
-               temp = scnprintf(next, size, "%2d [%3d]:", i, ahcd->load[i]);
-               size -= temp;
-               next += temp;
-
-               do {
-                       temp = scnprintf(next, size, " ed%d/%p",
-                               ed->interval, ed);
-                       size -= temp;
-                       next += temp;
-                       for (temp = 0; temp < seen_count; temp++) {
-                               if (seen[temp] == ed)
-                                       break;
-                       }
-
-                       /* show more info the first time around */
-                       if (temp == seen_count) {
-                               u32     info = hc32_to_cpu(ahcd, ed->hwINFO);
-                               struct list_head        *entry;
-                               unsigned                qlen = 0;
-
-                               /* qlen measured here in TDs, not urbs */
-                               list_for_each(entry, &ed->td_list)
-                                       qlen++;
-                               temp = scnprintf(next, size,
-                                       " (%cs dev%d ep%d%s qlen %u"
-                                       " max %d %08x%s%s)",
-                                       (info & ED_SPEED_FULL) ? 'f' : 'l',
-                                       ED_FA_GET(info),
-                                       ED_EN_GET(info),
-                                       (info & ED_ISO) ? "iso" : "int",
-                                       qlen,
-                                       ED_MPS_GET(info),
-                                       info,
-                                       (info & ED_SKIP) ? " K" : "",
-                                       (ed->hwHeadP &
-                                               cpu_to_hc32(ahcd, ED_H)) ?
-                                                       " H" : "");
-                               size -= temp;
-                               next += temp;
-
-                               if (seen_count < DBG_SCHED_LIMIT)
-                                       seen[seen_count++] = ed;
-
-                               ed = ed->ed_next;
-
-                       } else {
-                               /* we've seen it and what's after */
-                               temp = 0;
-                               ed = NULL;
-                       }
-
-               } while (ed);
-
-               temp = scnprintf(next, size, "\n");
-               size -= temp;
-               next += temp;
-       }
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       kfree(seen);
-
-       return PAGE_SIZE - size;
-}
-
-
-#undef DBG_SCHED_LIMIT
-
-static ssize_t fill_registers_buffer(struct debug_buffer *buf)
-{
-       struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct admhcd_regs __iomem *regs;
-       unsigned long           flags;
-       unsigned                temp, size;
-       char                    *next;
-       u32                     rdata;
-
-       ahcd = buf->ahcd;
-       hcd = admhc_to_hcd(ahcd);
-       regs = ahcd->regs;
-       next = buf->page;
-       size = PAGE_SIZE;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       /* dump driver info, then registers in spec order */
-
-       admhc_dbg_sw(ahcd, &next, &size,
-               "bus %s, device %s\n"
-               "%s\n"
-               "%s\n",
-               hcd->self.controller->bus->name,
-               dev_name(hcd->self.controller),
-               hcd->product_desc,
-               hcd_name);
-
-       if (!HCD_HW_ACCESSIBLE(hcd)) {
-               size -= scnprintf(next, size,
-                       "SUSPENDED (no register access)\n");
-               goto done;
-       }
-
-       admhc_dump_status(ahcd, &next, &size);
-
-       /* other registers mostly affect frame timings */
-       rdata = admhc_readl(ahcd, &regs->fminterval);
-       temp = scnprintf(next, size,
-                       "fmintvl 0x%08x %sFSLDP=0x%04x FI=0x%04x\n",
-                       rdata, (rdata & ADMHC_SFI_FIT) ? "FIT " : "",
-                       (rdata >> ADMHC_SFI_FSLDP_SHIFT) & ADMHC_SFI_FSLDP_MASK,
-                       rdata  & ADMHC_SFI_FI_MASK);
-       size -= temp;
-       next += temp;
-
-       rdata = admhc_readl(ahcd, &regs->fmnumber);
-       temp = scnprintf(next, size, "fmnumber 0x%08x %sFR=0x%04x FN=%04x\n",
-                       rdata, (rdata & ADMHC_SFN_FRT) ? "FRT " : "",
-                       (rdata >> ADMHC_SFN_FR_SHIFT) & ADMHC_SFN_FR_MASK,
-                       rdata  & ADMHC_SFN_FN_MASK);
-       size -= temp;
-       next += temp;
-
-       /* TODO: use predefined bitmask */
-       rdata = admhc_readl(ahcd, &regs->lsthresh);
-       temp = scnprintf(next, size, "lsthresh 0x%04x\n",
-                       rdata & 0x3fff);
-       size -= temp;
-       next += temp;
-
-       temp = scnprintf(next, size, "hub poll timer: %s\n",
-                       admhcd_to_hcd(ahcd)->poll_rh ? "ON" : "OFF");
-       size -= temp;
-       next += temp;
-
-       /* roothub */
-       admhc_dump_roothub(ahcd, 1, &next, &size);
-
-done:
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       return PAGE_SIZE - size;
-}
-
-
-static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
-                               ssize_t (*fill_func)(struct debug_buffer *))
-{
-       struct debug_buffer *buf;
-
-       buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
-
-       if (buf) {
-               buf->ahcd = ahcd;
-               buf->fill_func = fill_func;
-               mutex_init(&buf->mutex);
-       }
-
-       return buf;
-}
-
-static int fill_buffer(struct debug_buffer *buf)
-{
-       int ret = 0;
-
-       if (!buf->page)
-               buf->page = (char *)get_zeroed_page(GFP_KERNEL);
-
-       if (!buf->page) {
-               ret = -ENOMEM;
-               goto out;
-       }
-
-       ret = buf->fill_func(buf);
-
-       if (ret >= 0) {
-               buf->count = ret;
-               ret = 0;
-       }
-
-out:
-       return ret;
-}
-
-static ssize_t debug_output(struct file *file, char __user *user_buf,
-                       size_t len, loff_t *offset)
-{
-       struct debug_buffer *buf = file->private_data;
-       int ret = 0;
-
-       mutex_lock(&buf->mutex);
-       if (buf->count == 0) {
-               ret = fill_buffer(buf);
-               if (ret != 0) {
-                       mutex_unlock(&buf->mutex);
-                       goto out;
-               }
-       }
-       mutex_unlock(&buf->mutex);
-
-       ret = simple_read_from_buffer(user_buf, len, offset,
-                                       buf->page, buf->count);
-
-out:
-       return ret;
-}
-
-static int debug_close(struct inode *inode, struct file *file)
-{
-       struct debug_buffer *buf = file->private_data;
-
-       if (buf) {
-               if (buf->page)
-                       free_page((unsigned long)buf->page);
-               kfree(buf);
-       }
-
-       return 0;
-}
-
-static int debug_async_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static int debug_periodic_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private,
-                                               fill_periodic_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static int debug_registers_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private,
-                                               fill_registers_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static inline void create_debug_files(struct admhcd *ahcd)
-{
-       struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
-
-       ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
-       if (!ahcd->debug_dir)
-               goto dir_error;
-
-       ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
-                                               ahcd->debug_dir, ahcd,
-                                               &debug_async_fops);
-       if (!ahcd->debug_async)
-               goto async_error;
-
-       ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
-                                               ahcd->debug_dir, ahcd,
-                                               &debug_periodic_fops);
-       if (!ahcd->debug_periodic)
-               goto periodic_error;
-
-       ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
-                                               ahcd->debug_dir, ahcd,
-                                               &debug_registers_fops);
-       if (!ahcd->debug_registers)
-               goto registers_error;
-
-       admhc_dbg(ahcd, "created debug files\n");
-       return;
-
-registers_error:
-       debugfs_remove(ahcd->debug_periodic);
-periodic_error:
-       debugfs_remove(ahcd->debug_async);
-async_error:
-       debugfs_remove(ahcd->debug_dir);
-dir_error:
-       ahcd->debug_periodic = NULL;
-       ahcd->debug_async = NULL;
-       ahcd->debug_dir = NULL;
-}
-
-static inline void remove_debug_files(struct admhcd *ahcd)
-{
-       debugfs_remove(ahcd->debug_registers);
-       debugfs_remove(ahcd->debug_periodic);
-       debugfs_remove(ahcd->debug_async);
-       debugfs_remove(ahcd->debug_dir);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
diff --git a/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-drv.c b/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-drv.c
deleted file mode 100644 (file)
index 798fd22..0000000
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-au1xxx.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *   (C) Copyright 2002 Hewlett-Packard Company
- *
- *   Written by Christopher Hoover <ch@hpl.hp.com>
- *   Based on fragments of previous driver by Russell King et al.
- *
- *   Modified for LH7A404 from ahcd-sa1111.c
- *    by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *   Modified for AMD Alchemy Au1xxx
- *    by Matt Porter <mporter@kernel.crashing.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-#ifdef DEBUG
-#define HCD_DBG(f, a...)       printk(KERN_DEBUG "%s: " f, hcd_name, ## a)
-#else
-#define HCD_DBG(f, a...)       do {} while (0)
-#endif
-#define HCD_ERR(f, a...)       printk(KERN_ERR "%s: " f, hcd_name, ## a)
-#define HCD_INFO(f, a...)      printk(KERN_INFO "%s: " f, hcd_name, ## a)
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_adm5120_probe(const struct hc_driver *driver,
-                 struct platform_device *dev)
-{
-       int retval;
-       struct usb_hcd *hcd;
-       int irq;
-       struct resource *regs;
-
-       /* sanity checks */
-       regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
-       if (!regs) {
-               HCD_DBG("no IOMEM resource found\n");
-               return -ENODEV;
-       }
-
-       irq = platform_get_irq(dev, 0);
-       if (irq < 0) {
-               HCD_DBG("no IRQ resource found\n");
-               return -ENODEV;
-       }
-
-       hcd = usb_create_hcd(driver, &dev->dev, "ADM5120");
-       if (!hcd)
-               return -ENOMEM;
-
-       hcd->rsrc_start = regs->start;
-       hcd->rsrc_len = regs->end - regs->start + 1;
-
-       if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-               HCD_DBG("request_mem_region failed\n");
-               retval = -EBUSY;
-               goto err_dev;
-       }
-
-       hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-       if (!hcd->regs) {
-               HCD_DBG("ioremap failed\n");
-               retval = -ENOMEM;
-               goto err_mem;
-       }
-
-       admhc_hcd_init(hcd_to_admhcd(hcd));
-
-       retval = usb_add_hcd(hcd, irq, 0);
-       if (retval)
-               goto err_io;
-
-       return 0;
-
-err_io:
-       iounmap(hcd->regs);
-err_mem:
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err_dev:
-       usb_put_hcd(hcd);
-       return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-static void admhc_adm5120_remove(struct usb_hcd *hcd,
-               struct platform_device *dev)
-{
-       usb_remove_hcd(hcd);
-       iounmap(hcd->regs);
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-       usb_put_hcd(hcd);
-}
-
-static int admhc_adm5120_start(struct usb_hcd *hcd)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             ret;
-
-       ret = admhc_init(ahcd);
-       if (ret < 0) {
-               HCD_ERR("unable to init %s\n", hcd->self.bus_name);
-               goto err;
-       }
-
-       ret = admhc_run(ahcd);
-       if (ret < 0) {
-               HCD_ERR("unable to run %s\n", hcd->self.bus_name);
-               goto err_stop;
-       }
-
-       return 0;
-
-err_stop:
-       admhc_stop(hcd);
-err:
-       return ret;
-}
-
-static const struct hc_driver adm5120_hc_driver = {
-       .description =          hcd_name,
-       .product_desc =         "ADM5120 built-in USB 1.1 Host Controller",
-       .hcd_priv_size =        sizeof(struct admhcd),
-
-       /*
-        * generic hardware linkage
-        */
-       .irq =                  admhc_irq,
-       .flags =                HCD_USB11 | HCD_MEMORY,
-
-       /*
-        * basic lifecycle operations
-        */
-       .start =                admhc_adm5120_start,
-       .stop =                 admhc_stop,
-       .shutdown =             admhc_shutdown,
-
-       /*
-        * managing i/o requests and associated device resources
-        */
-       .urb_enqueue =          admhc_urb_enqueue,
-       .urb_dequeue =          admhc_urb_dequeue,
-       .endpoint_disable =     admhc_endpoint_disable,
-
-       /*
-        * scheduling support
-        */
-       .get_frame_number =     admhc_get_frame_number,
-
-       /*
-        * root hub support
-        */
-       .hub_status_data =      admhc_hub_status_data,
-       .hub_control =          admhc_hub_control,
-#ifdef CONFIG_PM
-       .bus_suspend =          admhc_bus_suspend,
-       .bus_resume =           admhc_bus_resume,
-#endif
-       .start_port_reset =     admhc_start_port_reset,
-};
-
-static int usb_hcd_adm5120_probe(struct platform_device *pdev)
-{
-       int ret;
-
-       ret = admhc_adm5120_probe(&adm5120_hc_driver, pdev);
-
-       return ret;
-}
-
-static int usb_hcd_adm5120_remove(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-       admhc_adm5120_remove(hcd, pdev);
-
-       return 0;
-}
-
-#ifdef CONFIG_PM
-/* TODO */
-static int usb_hcd_adm5120_suspend(struct platform_device *dev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-       return 0;
-}
-
-static int usb_hcd_adm5120_resume(struct platform_device *dev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-       return 0;
-}
-#else
-#define usb_hcd_adm5120_suspend        NULL
-#define usb_hcd_adm5120_resume NULL
-#endif /* CONFIG_PM */
-
-static struct platform_driver usb_hcd_adm5120_driver = {
-       .probe          = usb_hcd_adm5120_probe,
-       .remove         = usb_hcd_adm5120_remove,
-       .shutdown       = usb_hcd_platform_shutdown,
-       .suspend        = usb_hcd_adm5120_suspend,
-       .resume         = usb_hcd_adm5120_resume,
-       .driver         = {
-               .name   = "adm5120-hcd",
-               .owner  = THIS_MODULE,
-       },
-};
-
diff --git a/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-hcd.c
deleted file mode 100644 (file)
index f721ec1..0000000
+++ /dev/null
@@ -1,843 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-hcd.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *   [ Initialisation is based on Linus'  ]
- *   [ uhci code and gregs ahcd fragments ]
- *   [ (C) Copyright 1999 Linus Torvalds  ]
- *   [ (C) Copyright 1999 Gregory P. Smith]
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/hcd.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/debugfs.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-
-#define DRIVER_VERSION "0.27.0"
-#define DRIVER_AUTHOR  "Gabor Juhos <juhosg@openwrt.org>"
-#define DRIVER_DESC    "ADMtek USB 1.1 Host Controller Driver"
-
-/*-------------------------------------------------------------------------*/
-
-#undef ADMHC_VERBOSE_DEBUG     /* not always helpful */
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define        OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
-
-#define        ADMHC_INTR_INIT \
-               (ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
-               | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI)
-
-/*-------------------------------------------------------------------------*/
-
-static const char hcd_name[] = "admhc-hcd";
-
-#define        STATECHANGE_DELAY       msecs_to_jiffies(300)
-
-#include "adm5120.h"
-
-static void admhc_dump(struct admhcd *ahcd, int verbose);
-static int admhc_init(struct admhcd *ahcd);
-static void admhc_stop(struct usb_hcd *hcd);
-
-#include "adm5120-dbg.c"
-#include "adm5120-mem.c"
-#include "adm5120-pm.c"
-#include "adm5120-hub.c"
-#include "adm5120-q.c"
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * queue up an urb for anything except the root hub
- */
-static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
-               gfp_t mem_flags)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       struct ed       *ed;
-       struct urb_priv *urb_priv;
-       unsigned int    pipe = urb->pipe;
-       int             td_cnt = 0;
-       unsigned long   flags;
-       int             ret = 0;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       spin_lock_irqsave(&ahcd->lock, flags);
-       urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-#endif
-
-       /* every endpoint has an ed, locate and maybe (re)initialize it */
-       ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
-       if (!ed)
-               return -ENOMEM;
-
-       /* for the private part of the URB we need the number of TDs */
-       switch (ed->type) {
-       case PIPE_CONTROL:
-               if (urb->transfer_buffer_length > TD_DATALEN_MAX)
-                       /* td_submit_urb() doesn't yet handle these */
-                       return -EMSGSIZE;
-
-               /* 1 TD for setup, 1 for ACK, plus ... */
-               td_cnt = 2;
-               /* FALLTHROUGH */
-       case PIPE_BULK:
-               /* one TD for every 4096 Bytes (can be up to 8K) */
-               td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX;
-               /* ... and for any remaining bytes ... */
-               if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
-                       td_cnt++;
-               /* ... and maybe a zero length packet to wrap it up */
-               if (td_cnt == 0)
-                       td_cnt++;
-               else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
-                       && (urb->transfer_buffer_length
-                               % usb_maxpacket(urb->dev, pipe,
-                                       usb_pipeout(pipe))) == 0)
-                       td_cnt++;
-               break;
-       case PIPE_INTERRUPT:
-               /*
-                * for Interrupt IN/OUT transactions, each ED contains
-                * only 1 TD.
-                * TODO: check transfer_buffer_length?
-                */
-               td_cnt = 1;
-               break;
-       case PIPE_ISOCHRONOUS:
-               /* number of packets from URB */
-               td_cnt = urb->number_of_packets;
-               break;
-       }
-
-       urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
-       if (!urb_priv)
-               return -ENOMEM;
-
-       urb_priv->ed = ed;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       /* don't submit to a dead HC */
-       if (!HCD_HW_ACCESSIBLE(hcd)) {
-               ret = -ENODEV;
-               goto fail;
-       }
-       if (!HC_IS_RUNNING(hcd->state)) {
-               ret = -ENODEV;
-               goto fail;
-       }
-
-       ret = usb_hcd_link_urb_to_ep(hcd, urb);
-       if (ret)
-               goto fail;
-
-       /* schedule the ed if needed */
-       if (ed->state == ED_IDLE) {
-               ret = ed_schedule(ahcd, ed);
-               if (ret < 0) {
-                       usb_hcd_unlink_urb_from_ep(hcd, urb);
-                       goto fail;
-               }
-               if (ed->type == PIPE_ISOCHRONOUS) {
-                       u16     frame = admhc_frame_no(ahcd);
-
-                       /* delay a few frames before the first TD */
-                       frame += max_t (u16, 8, ed->interval);
-                       frame &= ~(ed->interval - 1);
-                       frame |= ed->branch;
-                       urb->start_frame = frame;
-
-                       /* yes, only URB_ISO_ASAP is supported, and
-                        * urb->start_frame is never used as input.
-                        */
-               }
-       } else if (ed->type == PIPE_ISOCHRONOUS)
-               urb->start_frame = ed->last_iso + ed->interval;
-
-       /* fill the TDs and link them to the ed; and
-        * enable that part of the schedule, if needed
-        * and update count of queued periodic urbs
-        */
-       urb->hcpriv = urb_priv;
-       td_submit_urb(ahcd, urb);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
-#endif
-
-fail:
-       if (ret)
-               urb_priv_free(ahcd, urb_priv);
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       return ret;
-}
-
-/*
- * decouple the URB from the HC queues (TDs, urb_priv);
- * reporting is always done
- * asynchronously, and we might be dealing with an urb that's
- * partially transferred, or an ED with other urbs being unlinked.
- */
-static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
-               int status)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       unsigned long flags;
-       int ret;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       urb_print(ahcd, urb, "DEQUEUE", 1, status);
-#endif
-       ret = usb_hcd_check_unlink_urb(hcd, urb, status);
-       if (ret) {
-               /* Do nothing */
-               ;
-       } else if (HC_IS_RUNNING(hcd->state)) {
-               struct urb_priv *urb_priv;
-
-               /* Unless an IRQ completed the unlink while it was being
-                * handed to us, flag it for unlink and giveback, and force
-                * some upcoming INTR_SF to call finish_unlinks()
-                */
-               urb_priv = urb->hcpriv;
-               if (urb_priv) {
-                       if (urb_priv->ed->state == ED_OPER)
-                               start_ed_unlink(ahcd, urb_priv->ed);
-               }
-       } else {
-               /*
-                * with HC dead, we won't respect hc queue pointers
-                * any more ... just clean up every urb's memory.
-                */
-               if (urb->hcpriv)
-                       finish_urb(ahcd, urb, status);
-       }
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* frees config/altsetting state for endpoints,
- * including ED memory, dummy TD, and bulk/intr data toggle
- */
-
-static void admhc_endpoint_disable(struct usb_hcd *hcd,
-               struct usb_host_endpoint *ep)
-{
-       struct admhcd           *ahcd = hcd_to_admhcd(hcd);
-       unsigned long           flags;
-       struct ed               *ed = ep->hcpriv;
-       unsigned                limit = 1000;
-
-       /* ASSERT:  any requests/urbs are being unlinked */
-       /* ASSERT:  nobody can be submitting urbs for this any more */
-
-       if (!ed)
-               return;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       spin_lock_irqsave(&ahcd->lock, flags);
-       admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-#endif
-
-rescan:
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       if (!HC_IS_RUNNING(hcd->state)) {
-sanitize:
-               ed->state = ED_IDLE;
-               finish_unlinks(ahcd, 0);
-       }
-
-       switch (ed->state) {
-       case ED_UNLINK:         /* wait for hw to finish? */
-               /* major IRQ delivery trouble loses INTR_SOFI too... */
-               if (limit-- == 0) {
-                       admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
-                       goto sanitize;
-               }
-               spin_unlock_irqrestore(&ahcd->lock, flags);
-               schedule_timeout_uninterruptible(1);
-               goto rescan;
-       case ED_IDLE:           /* fully unlinked */
-               if (list_empty(&ed->td_list)) {
-                       td_free(ahcd, ed->dummy);
-                       ed_free(ahcd, ed);
-                       break;
-               }
-               /* else FALL THROUGH */
-       default:
-               /* caller was supposed to have unlinked any requests;
-                * that's not our job.  can't recover; must leak ed.
-                */
-               admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n",
-                       ed, ep->desc.bEndpointAddress, ed->state,
-                       list_empty(&ed->td_list) ? "" : " (has tds)");
-               td_free(ahcd, ed->dummy);
-               break;
-       }
-
-       ep->hcpriv = NULL;
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-}
-
-static int admhc_get_frame_number(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
-       return admhc_frame_no(ahcd);
-}
-
-static void admhc_usb_reset(struct admhcd *ahcd)
-{
-#if 0
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-       ahcd->hc_control &= OHCI_CTRL_RWC;
-       admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control);
-#else
-       /* FIXME */
-       ahcd->host_control = ADMHC_BUSS_RESET;
-       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-#endif
-}
-
-/* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
- * other cases where the next software may expect clean state from the
- * "firmware".  this is bus-neutral, unlike shutdown() methods.
- */
-static void
-admhc_shutdown(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd;
-
-       ahcd = hcd_to_admhcd(hcd);
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-       admhc_dma_disable(ahcd);
-       admhc_usb_reset(ahcd);
-       /* flush the writes */
-       admhc_writel_flush(ahcd);
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-static void admhc_eds_cleanup(struct admhcd *ahcd)
-{
-       if (ahcd->ed_tails[PIPE_INTERRUPT]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
-               ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
-               ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_CONTROL]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
-               ahcd->ed_tails[PIPE_CONTROL] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_BULK]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
-               ahcd->ed_tails[PIPE_BULK] = NULL;
-       }
-
-       ahcd->ed_head = NULL;
-}
-
-#define ED_DUMMY_INFO  (ED_SPEED_FULL | ED_SKIP)
-
-static int admhc_eds_init(struct admhcd *ahcd)
-{
-       struct ed *ed;
-
-       ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_INTERRUPT] = ed;
-
-       ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
-       ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
-       ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_CONTROL] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
-       ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
-       ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_BULK] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
-       ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
-       ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
-       admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
-       admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
-       admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
-#endif
-
-       return 0;
-
-err:
-       admhc_eds_cleanup(ahcd);
-       return -ENOMEM;
-}
-
-/* init memory, and kick BIOS/SMM off */
-
-static int admhc_init(struct admhcd *ahcd)
-{
-       struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
-       int ret;
-
-       admhc_disable(ahcd);
-       ahcd->regs = hcd->regs;
-
-       /* Disable HC interrupts */
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-
-       /* Read the number of ports unless overridden */
-       if (ahcd->num_ports == 0)
-               ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
-
-       ret = admhc_mem_init(ahcd);
-       if (ret)
-               goto err;
-
-       /* init dummy endpoints */
-       ret = admhc_eds_init(ahcd);
-       if (ret)
-               goto err;
-
-       create_debug_files(ahcd);
-
-       return 0;
-
-err:
-       admhc_stop(hcd);
-       return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * resets USB and controller
- * enable interrupts
- */
-static int admhc_run(struct admhcd *ahcd)
-{
-       u32                     val;
-       int                     first = ahcd->fminterval == 0;
-       struct usb_hcd          *hcd = admhcd_to_hcd(ahcd);
-
-       admhc_disable(ahcd);
-
-       /* boot firmware should have set this up (5.1.1.3.1) */
-       if (first) {
-               val = admhc_readl(ahcd, &ahcd->regs->fminterval);
-               ahcd->fminterval = val & ADMHC_SFI_FI_MASK;
-               if (ahcd->fminterval != FI)
-                       admhc_dbg(ahcd, "fminterval delta %d\n",
-                               ahcd->fminterval - FI);
-               ahcd->fminterval |=
-                       (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
-               /* also: power/overcurrent flags in rhdesc */
-       }
-
-#if 0  /* TODO: not applicable */
-       /* Reset USB nearly "by the book".  RemoteWakeupConnected has
-        * to be checked in case boot firmware (BIOS/SMM/...) has set up
-        * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
-        * If the bus glue detected wakeup capability then it should
-        * already be enabled; if so we'll just enable it again.
-        */
-       if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0)
-               device_set_wakeup_capable(hcd->self.controller, 1);
-#endif
-
-       switch (ahcd->host_control & ADMHC_HC_BUSS) {
-       case ADMHC_BUSS_OPER:
-               val = 0;
-               break;
-       case ADMHC_BUSS_SUSPEND:
-               /* FALLTHROUGH ? */
-       case ADMHC_BUSS_RESUME:
-               ahcd->host_control = ADMHC_BUSS_RESUME;
-               val = 10 /* msec wait */;
-               break;
-       /* case ADMHC_BUSS_RESET: */
-       default:
-               ahcd->host_control = ADMHC_BUSS_RESET;
-               val = 50 /* msec wait */;
-               break;
-       }
-       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-
-       /* flush the writes */
-       admhc_writel_flush(ahcd);
-
-       msleep(val);
-       val = admhc_read_rhdesc(ahcd);
-       if (!(val & ADMHC_RH_NPS)) {
-               /* power down each port */
-               for (val = 0; val < ahcd->num_ports; val++)
-                       admhc_write_portstatus(ahcd, val, ADMHC_PS_CPP);
-       }
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* 2msec timelimit here means no irqs/preempt */
-       spin_lock_irq(&ahcd->lock);
-
-       admhc_writel(ahcd, ADMHC_CTRL_SR,  &ahcd->regs->gencontrol);
-       val = 30;       /* ... allow extra time */
-       while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
-               if (--val == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "USB HC reset timed out!\n");
-                       return -1;
-               }
-               udelay(1);
-       }
-
-       /* enable HOST mode, before access any host specific register */
-       admhc_writel(ahcd, ADMHC_CTRL_UHFE,  &ahcd->regs->gencontrol);
-
-       /* Tell the controller where the descriptor list is */
-       admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
-
-       periodic_reinit(ahcd);
-
-       /* use rhsc irqs after khubd is fully initialized */
-       set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-       hcd->uses_new_polling = 1;
-
-#if 0
-       /* wake on ConnectStatusChange, matching external hubs */
-       admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
-#else
-       /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
-#endif
-
-       /* Choose the interrupts we care about now, others later on demand */
-       admhc_intr_ack(ahcd, ~0);
-       admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
-
-       admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
-
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* start controller operations */
-       ahcd->host_control = ADMHC_BUSS_OPER;
-       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-
-       val = 20;
-       while ((admhc_readl(ahcd, &ahcd->regs->host_control)
-                       & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
-               if (--val == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "unable to setup operational mode!\n");
-                       return -1;
-               }
-               mdelay(1);
-       }
-
-       hcd->state = HC_STATE_RUNNING;
-
-       ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-
-#if 0
-       /* FIXME: enabling DMA is always failed here for an unknown reason */
-       admhc_dma_enable(ahcd);
-
-       val = 200;
-       while ((admhc_readl(ahcd, &ahcd->regs->host_control)
-                       & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
-               if (--val == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "unable to enable DMA!\n");
-                       admhc_dump(ahcd, 1);
-                       return -1;
-               }
-               mdelay(1);
-       }
-
-#endif
-
-       spin_unlock_irq(&ahcd->lock);
-
-       mdelay(ADMHC_POTPGT);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static irqreturn_t admhc_irq(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       struct admhcd_regs __iomem *regs = ahcd->regs;
-       u32 ints;
-
-       ints = admhc_readl(ahcd, &regs->int_status);
-       if ((ints & ADMHC_INTR_INTA) == 0) {
-               /* no unmasked interrupt status is set */
-               return IRQ_NONE;
-       }
-
-       ints &= admhc_readl(ahcd, &regs->int_enable);
-
-       if (ints & ADMHC_INTR_FATI) {
-               /* e.g. due to PCI Master/Target Abort */
-               admhc_disable(ahcd);
-               admhc_err(ahcd, "Fatal Error, controller disabled\n");
-               admhc_dump(ahcd, 1);
-               admhc_usb_reset(ahcd);
-       }
-
-       if (ints & ADMHC_INTR_BABI) {
-               admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
-               admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
-               admhc_err(ahcd, "Babble Detected\n");
-       }
-
-       if (ints & ADMHC_INTR_INSM) {
-               admhc_vdbg(ahcd, "Root Hub Status Change\n");
-               ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-               admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
-
-               /* NOTE: Vendors didn't always make the same implementation
-                * choices for RHSC.  Many followed the spec; RHSC triggers
-                * on an edge, like setting and maybe clearing a port status
-                * change bit.  With others it's level-triggered, active
-                * until khubd clears all the port status change bits.  We'll
-                * always disable it here and rely on polling until khubd
-                * re-enables it.
-                */
-               admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
-               usb_hcd_poll_rh_status(hcd);
-       } else if (ints & ADMHC_INTR_RESI) {
-               /* For connect and disconnect events, we expect the controller
-                * to turn on RHSC along with RD.  But for remote wakeup events
-                * this might not happen.
-                */
-               admhc_vdbg(ahcd, "Resume Detect\n");
-               admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
-               set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-               if (ahcd->autostop) {
-                       spin_lock(&ahcd->lock);
-                       admhc_rh_resume(ahcd);
-                       spin_unlock(&ahcd->lock);
-               } else
-                       usb_hcd_resume_root_hub(hcd);
-       }
-
-       if (ints & ADMHC_INTR_TDC) {
-               admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
-               admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
-               if (HC_IS_RUNNING(hcd->state))
-                       admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
-               spin_lock(&ahcd->lock);
-               admhc_td_complete(ahcd);
-               spin_unlock(&ahcd->lock);
-               if (HC_IS_RUNNING(hcd->state))
-                       admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
-       }
-
-       if (ints & ADMHC_INTR_SO) {
-               /* could track INTR_SO to reduce available PCI/... bandwidth */
-               admhc_vdbg(ahcd, "Schedule Overrun\n");
-       }
-
-#if 1
-       spin_lock(&ahcd->lock);
-       if (ahcd->ed_rm_list)
-               finish_unlinks(ahcd, admhc_frame_no(ahcd));
-
-       if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list
-                       && HC_IS_RUNNING(hcd->state))
-               admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
-       spin_unlock(&ahcd->lock);
-#else
-       if (ints & ADMHC_INTR_SOFI) {
-               admhc_vdbg(ahcd, "Start Of Frame\n");
-               spin_lock(&ahcd->lock);
-
-               /* handle any pending ED removes */
-               finish_unlinks(ahcd, admhc_frameno(ahcd));
-
-               /* leaving INTR_SOFI enabled when there's still unlinking
-                * to be done in the (next frame).
-                */
-               if ((ahcd->ed_rm_list == NULL) ||
-                       HC_IS_RUNNING(hcd->state) == 0)
-                       /*
-                        * disable INTR_SOFI if there are no unlinking to be
-                        * done (in the next frame)
-                        */
-                       admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
-
-               spin_unlock(&ahcd->lock);
-       }
-#endif
-
-       if (HC_IS_RUNNING(hcd->state)) {
-               admhc_intr_ack(ahcd, ints);
-               admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
-               admhc_writel_flush(ahcd);
-       }
-
-       return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void admhc_stop(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
-       admhc_dump(ahcd, 1);
-
-       flush_scheduled_work();
-
-       admhc_usb_reset(ahcd);
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-
-       free_irq(hcd->irq, hcd);
-       hcd->irq = -1;
-
-       remove_debug_files(ahcd);
-       admhc_eds_cleanup(ahcd);
-       admhc_mem_cleanup(ahcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_ADM5120
-#include "adm5120-drv.c"
-#define PLATFORM_DRIVER                usb_hcd_adm5120_driver
-#endif
-
-#if    !defined(PLATFORM_DRIVER)
-#error "missing bus glue for admhc-hcd"
-#endif
-
-#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
-
-static int __init admhc_hcd_mod_init(void)
-{
-       int ret = 0;
-
-       if (usb_disabled())
-               return -ENODEV;
-
-       pr_info("%s: " DRIVER_INFO "\n", hcd_name);
-       pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
-               sizeof(struct ed), sizeof(struct td));
-       set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
-
-#ifdef DEBUG
-       admhc_debug_root = debugfs_create_dir("admhc", usb_debug_root);
-       if (!admhc_debug_root) {
-               ret = -ENOENT;
-               goto error_debug;
-       }
-#endif
-
-#ifdef PLATFORM_DRIVER
-       ret = platform_driver_register(&PLATFORM_DRIVER);
-       if (ret < 0)
-               goto error_platform;
-#endif
-
-       return ret;
-
-#ifdef PLATFORM_DRIVER
-       platform_driver_unregister(&PLATFORM_DRIVER);
-error_platform:
-#endif
-
-#ifdef DEBUG
-       debugfs_remove(admhc_debug_root);
-       admhc_debug_root = NULL;
-error_debug:
-#endif
-       clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
-       return ret;
-}
-module_init(admhc_hcd_mod_init);
-
-static void __exit admhc_hcd_mod_exit(void)
-{
-       platform_driver_unregister(&PLATFORM_DRIVER);
-#ifdef DEBUG
-       debugfs_remove(admhc_debug_root);
-#endif
-       clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
-}
-module_exit(admhc_hcd_mod_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_INFO);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-hub.c b/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-hub.c
deleted file mode 100644 (file)
index 8cabaf9..0000000
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-hub.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * ADM5120 Root Hub ... the nonsharable stuff
- */
-
-#define dbg_port(hc, label, num, value) \
-       admhc_dbg(hc, \
-               "%s port%d " \
-               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               label, num, value, \
-               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (value & ADMHC_PS_PESC) ? " PESC" : "", \
-               (value & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (value & ADMHC_PS_LSDA) ? " LSDA" : "", \
-               (value & ADMHC_PS_PPS) ? " PPS" : "", \
-               (value & ADMHC_PS_PRS) ? " PRS" : "", \
-               (value & ADMHC_PS_POCI) ? " POCI" : "", \
-               (value & ADMHC_PS_PSS) ? " PSS" : "", \
-               \
-               (value & ADMHC_PS_PES) ? " PES" : "", \
-               (value & ADMHC_PS_CCS) ? " CCS" : "" \
-               );
-
-#define dbg_port_write(hc, label, num, value) \
-       admhc_dbg(hc, \
-               "%s port%d " \
-               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               label, num, value, \
-               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (value & ADMHC_PS_PESC) ? " PESC" : "", \
-               (value & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (value & ADMHC_PS_CPP) ? " CPP" : "", \
-               (value & ADMHC_PS_SPP) ? " SPP" : "", \
-               (value & ADMHC_PS_SPR) ? " SPR" : "", \
-               (value & ADMHC_PS_CPS) ? " CPS" : "", \
-               (value & ADMHC_PS_SPS) ? " SPS" : "", \
-               \
-               (value & ADMHC_PS_SPE) ? " SPE" : "", \
-               (value & ADMHC_PS_CPE) ? " CPE" : "" \
-               );
-
-/*-------------------------------------------------------------------------*/
-
-/* build "status change" packet (one or two bytes) from HC registers */
-
-static int
-admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             i, changed = 0, length = 1;
-       int             any_connected = 0;
-       unsigned long   flags;
-       u32             status;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       if (!HCD_HW_ACCESSIBLE(hcd))
-               goto done;
-
-       /* init status */
-       status = admhc_read_rhdesc(ahcd);
-       if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
-               buf[0] = changed = 1;
-       else
-               buf[0] = 0;
-       if (ahcd->num_ports > 7) {
-               buf[1] = 0;
-               length++;
-       }
-
-       /* look at each port */
-       for (i = 0; i < ahcd->num_ports; i++) {
-               status = admhc_read_portstatus(ahcd, i);
-
-               /* can't autostop if ports are connected */
-               any_connected |= (status & ADMHC_PS_CCS);
-
-               if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC
-                               | ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
-                       changed = 1;
-                       if (i < 7)
-                               buf[0] |= 1 << (i + 1);
-                       else
-                               buf[1] |= 1 << (i - 7);
-               }
-       }
-
-       if (admhc_root_hub_state_changes(ahcd, changed,
-                       any_connected))
-               set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-       else
-               clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-
-done:
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return changed ? length : 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_get_hub_descriptor(struct admhcd *ahcd, char *buf)
-{
-       struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
-       u32 rh = admhc_read_rhdesc(ahcd);
-       u16 temp;
-
-       desc->bDescriptorType = USB_DT_HUB;     /* Hub-descriptor */
-       desc->bPwrOn2PwrGood = ADMHC_POTPGT/2;  /* use default value */
-       desc->bHubContrCurrent = 0x00;          /* 0mA */
-
-       desc->bNbrPorts = ahcd->num_ports;
-       temp = 1 + (ahcd->num_ports / 8);
-       desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
-
-       /* FIXME */
-       temp = 0;
-       if (rh & ADMHC_RH_NPS)          /* no power switching? */
-           temp |= 0x0002;
-       if (rh & ADMHC_RH_PSM)          /* per-port power switching? */
-           temp |= 0x0001;
-       if (rh & ADMHC_RH_NOCP)         /* no overcurrent reporting? */
-           temp |= 0x0010;
-       else if (rh & ADMHC_RH_OCPM)    /* per-port overcurrent reporting? */
-           temp |= 0x0008;
-       desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp);
-
-       /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-       desc->u.hs.DeviceRemovable[0] = 0;
-       desc->u.hs.DeviceRemovable[0] = ~0;
-
-       return 0;
-}
-
-static int admhc_get_hub_status(struct admhcd *ahcd, char *buf)
-{
-       struct usb_hub_status *hs = (struct usb_hub_status *)buf;
-       u32 t = admhc_read_rhdesc(ahcd);
-       u16 status, change;
-
-       status = 0;
-       status |= (t & ADMHC_RH_LPS) ? HUB_STATUS_LOCAL_POWER : 0;
-       status |= (t & ADMHC_RH_OCI) ? HUB_STATUS_OVERCURRENT : 0;
-
-       change = 0;
-       change |= (t & ADMHC_RH_LPSC) ? HUB_CHANGE_LOCAL_POWER : 0;
-       change |= (t & ADMHC_RH_OCIC) ? HUB_CHANGE_OVERCURRENT : 0;
-
-       hs->wHubStatus = (__force __u16)cpu_to_hc16(ahcd, status);
-       hs->wHubChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
-       return 0;
-}
-
-static int admhc_get_port_status(struct admhcd *ahcd, unsigned port, char *buf)
-{
-       struct usb_port_status *ps = (struct usb_port_status *)buf;
-       u32 t = admhc_read_portstatus(ahcd, port);
-       u16 status, change;
-
-       status = 0;
-       status |= (t & ADMHC_PS_CCS) ? USB_PORT_STAT_CONNECTION : 0;
-       status |= (t & ADMHC_PS_PES) ? USB_PORT_STAT_ENABLE : 0;
-       status |= (t & ADMHC_PS_PSS) ? USB_PORT_STAT_SUSPEND : 0;
-       status |= (t & ADMHC_PS_POCI) ? USB_PORT_STAT_OVERCURRENT : 0;
-       status |= (t & ADMHC_PS_PRS) ? USB_PORT_STAT_RESET : 0;
-       status |= (t & ADMHC_PS_PPS) ? USB_PORT_STAT_POWER : 0;
-       status |= (t & ADMHC_PS_LSDA) ? USB_PORT_STAT_LOW_SPEED : 0;
-
-       change = 0;
-       change |= (t & ADMHC_PS_CSC) ? USB_PORT_STAT_C_CONNECTION : 0;
-       change |= (t & ADMHC_PS_PESC) ? USB_PORT_STAT_C_ENABLE : 0;
-       change |= (t & ADMHC_PS_PSSC) ? USB_PORT_STAT_C_SUSPEND : 0;
-       change |= (t & ADMHC_PS_OCIC) ? USB_PORT_STAT_C_OVERCURRENT : 0;
-       change |= (t & ADMHC_PS_PRSC) ? USB_PORT_STAT_C_RESET : 0;
-
-       ps->wPortStatus = (__force __u16)cpu_to_hc16(ahcd, status);
-       ps->wPortChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_OTG
-
-static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       u32                     status;
-
-       if (!port)
-               return -EINVAL;
-       port--;
-
-       /* start port reset before HNP protocol times out */
-       status = admhc_read_portstatus(ahcd, port);
-       if (!(status & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       /* khubd will finish the reset later */
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_PRS);
-       return 0;
-}
-
-static void start_hnp(struct admhcd *ahcd);
-
-#else
-
-#define        admhc_start_port_reset          NULL
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-
-/* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
- * not necessarily continuous ... to guard against resume signaling.
- * The short timeout is safe for non-root hubs, and is backward-compatible
- * with earlier Linux hosts.
- */
-#ifdef CONFIG_USB_SUSPEND
-#define        PORT_RESET_MSEC         50
-#else
-#define        PORT_RESET_MSEC         10
-#endif
-
-/* this timer value might be vendor-specific ... */
-#define        PORT_RESET_HW_MSEC      10
-
-/* wrap-aware logic morphed from <linux/jiffies.h> */
-#define tick_before(t1, t2) ((s16)(((s16)(t1)) - ((s16)(t2))) < 0)
-
-/* called from some task, normally khubd */
-static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "reset port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPR);
-       mdelay(10);
-       admhc_write_portstatus(ahcd, port, (ADMHC_PS_SPE | ADMHC_PS_CSC));
-       mdelay(100);
-
-       return 0;
-}
-
-static inline int admhc_port_enable(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "enable port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPE);
-
-       return 0;
-}
-
-static inline int admhc_port_disable(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "disable port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_CPE);
-
-       return 0;
-}
-
-static inline int admhc_port_write(struct admhcd *ahcd, unsigned port,
-               u32 val)
-{
-#ifdef ADMHC_VERBOSE_DEBUG
-       dbg_port_write(ahcd, "write", port, val);
-#endif
-       admhc_write_portstatus(ahcd, port, val);
-
-       return 0;
-}
-
-static int admhc_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
-               u16 wIndex, char *buf, u16 wLength)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             ports = ahcd->num_ports;
-       int             ret = 0;
-
-       if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
-               return -ESHUTDOWN;
-
-       switch (typeReq) {
-       case ClearHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-#if 0                  /* FIXME */
-                       admhc_writel(ahcd, ADMHC_RH_OCIC,
-                                       &ahcd->regs->roothub.status);
-#endif
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case ClearPortFeature:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       ret = admhc_port_disable(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPS);
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPP);
-                       break;
-               case USB_PORT_FEAT_C_CONNECTION:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CSC);
-                       break;
-               case USB_PORT_FEAT_C_ENABLE:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PESC);
-                       break;
-               case USB_PORT_FEAT_C_SUSPEND:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PSSC);
-                       break;
-               case USB_PORT_FEAT_C_OVER_CURRENT:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_OCIC);
-                       break;
-               case USB_PORT_FEAT_C_RESET:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PRSC);
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case GetHubDescriptor:
-               ret = admhc_get_hub_descriptor(ahcd, buf);
-               break;
-       case GetHubStatus:
-               ret = admhc_get_hub_status(ahcd, buf);
-               break;
-       case GetPortStatus:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               ret = admhc_get_port_status(ahcd, wIndex, buf);
-               break;
-       case SetHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-                       /* FIXME:  this can be cleared, yes? */
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case SetPortFeature:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       ret = admhc_port_enable(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_RESET:
-                       ret = admhc_port_reset(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-#ifdef CONFIG_USB_OTG
-                       if (hcd->self.otg_port == (wIndex + 1)
-                                       && hcd->self.b_hnp_enable)
-                               start_hnp(ahcd);
-                       else
-#endif
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPS);
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPP);
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-
-       default:
-error:
-               /* "protocol stall" on error */
-               ret = -EPIPE;
-       }
-
-       return ret;
-}
-
diff --git a/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-mem.c b/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-mem.c
deleted file mode 100644 (file)
index 79fff70..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-mem.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OHCI deals with three types of memory:
- *     - data used only by the HCD ... kmalloc is fine
- *     - async and periodic schedules, shared by HC and HCD ... these
- *       need to use dma_pool or dma_alloc_coherent
- *     - driver buffers, read/written by HC ... the hcd glue or the
- *       device driver provides us with dma addresses
- *
- * There's also "register" data, which is memory mapped.
- * No memory seen by this driver (or any HCD) may be paged out.
- */
-
-/*-------------------------------------------------------------------------*/
-
-static void admhc_hcd_init(struct admhcd *ahcd)
-{
-       ahcd->next_statechange = jiffies;
-       spin_lock_init(&ahcd->lock);
-       INIT_LIST_HEAD(&ahcd->pending);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_mem_init(struct admhcd *ahcd)
-{
-       ahcd->td_cache = dma_pool_create("admhc_td",
-               admhcd_to_hcd(ahcd)->self.controller,
-               sizeof(struct td),
-               TD_ALIGN, /* byte alignment */
-               0 /* no page-crossing issues */
-               );
-       if (!ahcd->td_cache)
-               goto err;
-
-       ahcd->ed_cache = dma_pool_create("admhc_ed",
-               admhcd_to_hcd(ahcd)->self.controller,
-               sizeof(struct ed),
-               ED_ALIGN, /* byte alignment */
-               0 /* no page-crossing issues */
-               );
-       if (!ahcd->ed_cache)
-               goto err_td_cache;
-
-       return 0;
-
-err_td_cache:
-       dma_pool_destroy(ahcd->td_cache);
-       ahcd->td_cache = NULL;
-err:
-       return -ENOMEM;
-}
-
-static void admhc_mem_cleanup(struct admhcd *ahcd)
-{
-       if (ahcd->td_cache) {
-               dma_pool_destroy(ahcd->td_cache);
-               ahcd->td_cache = NULL;
-       }
-
-       if (ahcd->ed_cache) {
-               dma_pool_destroy(ahcd->ed_cache);
-               ahcd->ed_cache = NULL;
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* ahcd "done list" processing needs this mapping */
-static inline struct td *dma_to_td(struct admhcd *ahcd, dma_addr_t td_dma)
-{
-       struct td *td;
-
-       td_dma &= TD_MASK;
-       td = ahcd->td_hash[TD_HASH_FUNC(td_dma)];
-       while (td && td->td_dma != td_dma)
-               td = td->td_hash;
-
-       return td;
-}
-
-/* TDs ... */
-static struct td *td_alloc(struct admhcd *ahcd, gfp_t mem_flags)
-{
-       dma_addr_t      dma;
-       struct td       *td;
-
-       td = dma_pool_alloc(ahcd->td_cache, mem_flags, &dma);
-       if (!td)
-               return NULL;
-
-       /* in case ahcd fetches it, make it look dead */
-       memset(td, 0, sizeof *td);
-       td->hwNextTD = cpu_to_hc32(ahcd, dma);
-       td->td_dma = dma;
-       /* hashed in td_fill */
-
-       return td;
-}
-
-static void td_free(struct admhcd *ahcd, struct td *td)
-{
-       struct td **prev = &ahcd->td_hash[TD_HASH_FUNC(td->td_dma)];
-
-       while (*prev && *prev != td)
-               prev = &(*prev)->td_hash;
-       if (*prev)
-               *prev = td->td_hash;
-#if 0
-       /* TODO: remove */
-       else if ((td->hwINFO & cpu_to_hc32(ahcd, TD_DONE)) != 0)
-               admhc_dbg(ahcd, "no hash for td %p\n", td);
-#else
-       else if ((td->flags & TD_FLAG_DONE) != 0)
-               admhc_dbg(ahcd, "no hash for td %p\n", td);
-#endif
-       dma_pool_free(ahcd->td_cache, td, td->td_dma);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* EDs ... */
-static struct ed *ed_alloc(struct admhcd *ahcd, gfp_t mem_flags)
-{
-       dma_addr_t      dma;
-       struct ed       *ed;
-
-       ed = dma_pool_alloc(ahcd->ed_cache, mem_flags, &dma);
-       if (!ed)
-               return NULL;
-
-       memset(ed, 0, sizeof(*ed));
-       ed->dma = dma;
-
-       INIT_LIST_HEAD(&ed->td_list);
-       INIT_LIST_HEAD(&ed->urb_list);
-
-       return ed;
-}
-
-static void ed_free(struct admhcd *ahcd, struct ed *ed)
-{
-       dma_pool_free(ahcd->ed_cache, ed, ed->dma);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* URB priv ... */
-static void urb_priv_free(struct admhcd *ahcd, struct urb_priv *urb_priv)
-{
-       int i;
-
-       for (i = 0; i < urb_priv->td_cnt; i++)
-               if (urb_priv->td[i])
-                       td_free(ahcd, urb_priv->td[i]);
-
-       list_del(&urb_priv->pending);
-       kfree(urb_priv);
-}
-
-static struct urb_priv *urb_priv_alloc(struct admhcd *ahcd, int num_tds,
-               gfp_t mem_flags)
-{
-       struct urb_priv *priv;
-
-       /* allocate the private part of the URB */
-       priv = kzalloc(sizeof(*priv) + sizeof(struct td) * num_tds, mem_flags);
-       if (!priv)
-               goto err;
-
-       /* allocate the TDs (deferring hash chain updates) */
-       for (priv->td_cnt = 0; priv->td_cnt < num_tds; priv->td_cnt++) {
-               priv->td[priv->td_cnt] = td_alloc(ahcd, mem_flags);
-               if (priv->td[priv->td_cnt] == NULL)
-                       goto err_free;
-       }
-
-       INIT_LIST_HEAD(&priv->pending);
-
-       return priv;
-
-err_free:
-       urb_priv_free(ahcd, priv);
-err:
-       return NULL;
-}
diff --git a/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-pm.c b/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-pm.c
deleted file mode 100644 (file)
index 7d7fc24..0000000
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from fragments of the OHCI driver.
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#define OHCI_SCHED_ENABLES \
-       (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
-
-#ifdef CONFIG_PM
-static int admhc_restart(struct admhcd *ahcd);
-
-static int admhc_rh_suspend(struct admhcd *ahcd, int autostop)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       int                     status = 0;
-
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-       switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-       case OHCI_USB_RESUME:
-               admhc_dbg(ahcd, "resume/suspend?\n");
-               ahcd->hc_control &= ~OHCI_CTRL_HCFS;
-               ahcd->hc_control |= OHCI_USB_RESET;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-               /* FALL THROUGH */
-       case OHCI_USB_RESET:
-               status = -EBUSY;
-               admhc_dbg(ahcd, "needs reinit!\n");
-               goto done;
-       case OHCI_USB_SUSPEND:
-               if (!ahcd->autostop) {
-                       admhc_dbg(ahcd, "already suspended\n");
-                       goto done;
-               }
-       }
-       admhc_dbg(ahcd, "%s root hub\n",
-                       autostop ? "auto-stop" : "suspend");
-
-       /* First stop any processing */
-       if (!autostop && (ahcd->hc_control & OHCI_SCHED_ENABLES)) {
-               ahcd->hc_control &= ~OHCI_SCHED_ENABLES;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-               admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->intrstatus);
-
-               /* sched disables take effect on the next frame,
-                * then the last WDH could take 6+ msec
-                */
-               admhc_dbg(ahcd, "stopping schedules ...\n");
-               ahcd->autostop = 0;
-               spin_unlock_irq (&ahcd->lock);
-               msleep (8);
-               spin_lock_irq(&ahcd->lock);
-       }
-       dl_done_list (ahcd);
-       finish_unlinks (ahcd, admhc_frame_no(ahcd));
-
-       /* maybe resume can wake root hub */
-       if (device_may_wakeup(&admhcd_to_hcd(ahcd)->self.root_hub->dev) ||
-                       autostop)
-               ahcd->hc_control |= OHCI_CTRL_RWE;
-       else {
-               admhc_writel(ahcd, OHCI_INTR_RHSC, &ahcd->regs->intrdisable);
-               ahcd->hc_control &= ~OHCI_CTRL_RWE;
-       }
-
-       /* Suspend hub ... this is the "global (to this bus) suspend" mode,
-        * which doesn't imply ports will first be individually suspended.
-        */
-       ahcd->hc_control &= ~OHCI_CTRL_HCFS;
-       ahcd->hc_control |= OHCI_USB_SUSPEND;
-       admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-
-       /* no resumes until devices finish suspending */
-       if (!autostop) {
-               ahcd->next_statechange = jiffies + msecs_to_jiffies (5);
-               ahcd->autostop = 0;
-       }
-
-done:
-       return status;
-}
-
-static inline struct ed *find_head(struct ed *ed)
-{
-       /* for bulk and control lists */
-       while (ed->ed_prev)
-               ed = ed->ed_prev;
-       return ed;
-}
-
-/* caller has locked the root hub */
-static int admhc_rh_resume(struct admhcd *ahcd)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       struct usb_hcd          *hcd = admhcd_to_hcd (ahcd);
-       u32                     temp, enables;
-       int                     status = -EINPROGRESS;
-       int                     autostopped = ahcd->autostop;
-
-       ahcd->autostop = 0;
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-
-       if (ahcd->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
-               /* this can happen after resuming a swsusp snapshot */
-               if (hcd->state == HC_STATE_RESUMING) {
-                       admhc_dbg(ahcd, "BIOS/SMM active, control %03x\n",
-                                       ahcd->hc_control);
-                       status = -EBUSY;
-               /* this happens when pmcore resumes HC then root */
-               } else {
-                       admhc_dbg(ahcd, "duplicate resume\n");
-                       status = 0;
-               }
-       } else switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-       case OHCI_USB_SUSPEND:
-               ahcd->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
-               ahcd->hc_control |= OHCI_USB_RESUME;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-               admhc_dbg(ahcd, "%s root hub\n",
-                               autostopped ? "auto-start" : "resume");
-               break;
-       case OHCI_USB_RESUME:
-               /* HCFS changes sometime after INTR_RD */
-               admhc_dbg(ahcd, "%swakeup root hub\n",
-                               autostopped ? "auto-" : "");
-               break;
-       case OHCI_USB_OPER:
-               /* this can happen after resuming a swsusp snapshot */
-               admhc_dbg(ahcd, "snapshot resume? reinit\n");
-               status = -EBUSY;
-               break;
-       default:                /* RESET, we lost power */
-               admhc_dbg(ahcd, "lost power\n");
-               status = -EBUSY;
-       }
-       if (status == -EBUSY) {
-               if (!autostopped) {
-                       spin_unlock_irq (&ahcd->lock);
-                       (void) ahcd_init (ahcd);
-                       status = admhc_restart (ahcd);
-                       spin_lock_irq(&ahcd->lock);
-               }
-               return status;
-       }
-       if (status != -EINPROGRESS)
-               return status;
-       if (autostopped)
-               goto skip_resume;
-       spin_unlock_irq (&ahcd->lock);
-
-       /* Some controllers (lucent erratum) need extra-long delays */
-       msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
-
-       temp = admhc_readl(ahcd, &ahcd->regs->control);
-       temp &= OHCI_CTRL_HCFS;
-       if (temp != OHCI_USB_RESUME) {
-               admhc_err (ahcd, "controller won't resume\n");
-               spin_lock_irq(&ahcd->lock);
-               return -EBUSY;
-       }
-
-       /* disable old schedule state, reinit from scratch */
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_controlhead);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_controlcurrent);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkhead);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkcurrent);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_periodcurrent);
-       admhc_writel(ahcd, (u32) ahcd->hcca_dma, &ahcd->ahcd->regs->hcca);
-
-       /* Sometimes PCI D3 suspend trashes frame timings ... */
-       periodic_reinit(ahcd);
-
-       /* the following code is executed with ahcd->lock held and
-        * irqs disabled if and only if autostopped is true
-        */
-
-skip_resume:
-       /* interrupts might have been disabled */
-       admhc_writel(ahcd, OHCI_INTR_INIT, &ahcd->regs->int_enable);
-       if (ahcd->ed_rm_list)
-               admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->int_enable);
-
-       /* Then re-enable operations */
-       admhc_writel(ahcd, OHCI_USB_OPER, &ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-       if (!autostopped)
-               msleep (3);
-
-       temp = ahcd->hc_control;
-       temp &= OHCI_CTRL_RWC;
-       temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
-       ahcd->hc_control = temp;
-       admhc_writel(ahcd, temp, &ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-
-       /* TRSMRCY */
-       if (!autostopped) {
-               msleep (10);
-               spin_lock_irq(&ahcd->lock);
-       }
-       /* now ahcd->lock is always held and irqs are always disabled */
-
-       /* keep it alive for more than ~5x suspend + resume costs */
-       ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-
-       /* maybe turn schedules back on */
-       enables = 0;
-       temp = 0;
-       if (!ahcd->ed_rm_list) {
-               if (ahcd->ed_controltail) {
-                       admhc_writel(ahcd,
-                                       find_head (ahcd->ed_controltail)->dma,
-                                       &ahcd->regs->ed_controlhead);
-                       enables |= OHCI_CTRL_CLE;
-                       temp |= OHCI_CLF;
-               }
-               if (ahcd->ed_bulktail) {
-                       admhc_writel(ahcd, find_head (ahcd->ed_bulktail)->dma,
-                               &ahcd->regs->ed_bulkhead);
-                       enables |= OHCI_CTRL_BLE;
-                       temp |= OHCI_BLF;
-               }
-       }
-       if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
-               enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
-       if (enables) {
-               admhc_dbg(ahcd, "restarting schedules ... %08x\n", enables);
-               ahcd->hc_control |= enables;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               if (temp)
-                       admhc_writel(ahcd, temp, &ahcd->regs->cmdstatus);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-       }
-
-       return 0;
-}
-
-static int admhc_bus_suspend(struct usb_hcd *hcd)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             rc;
-
-       spin_lock_irq(&ahcd->lock);
-
-       if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
-               rc = -ESHUTDOWN;
-       else
-               rc = admhc_rh_suspend(ahcd, 0);
-       spin_unlock_irq(&ahcd->lock);
-       return rc;
-}
-
-static int admhc_bus_resume(struct usb_hcd *hcd)
-{
-       struct admhcd           *ahcd = hcd_to_admhcd(hcd);
-       int                     rc;
-
-       if (time_before(jiffies, ahcd->next_statechange))
-               msleep(5);
-
-       spin_lock_irq(&ahcd->lock);
-
-       if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
-               rc = -ESHUTDOWN;
-       else
-               rc = admhc_rh_resume(ahcd);
-       spin_unlock_irq(&ahcd->lock);
-
-       /* poll until we know a device is connected or we autostop */
-       if (rc == 0)
-               usb_hcd_poll_rh_status(hcd);
-       return rc;
-}
-
-/* Carry out polling-, autostop-, and autoresume-related state changes */
-static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
-               int any_connected)
-{
-       int     poll_rh = 1;
-
-       switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-
-       case OHCI_USB_OPER:
-               /* keep on polling until we know a device is connected
-                * and RHSC is enabled */
-               if (!ahcd->autostop) {
-                       if (any_connected ||
-                                       !device_may_wakeup(&admhcd_to_hcd(ahcd)
-                                               ->self.root_hub->dev)) {
-                               if (admhc_readl(ahcd, &ahcd->regs->int_enable) &
-                                               OHCI_INTR_RHSC)
-                                       poll_rh = 0;
-                       } else {
-                               ahcd->autostop = 1;
-                               ahcd->next_statechange = jiffies + HZ;
-                       }
-
-               /* if no devices have been attached for one second, autostop */
-               } else {
-                       if (changed || any_connected) {
-                               ahcd->autostop = 0;
-                               ahcd->next_statechange = jiffies +
-                                               STATECHANGE_DELAY;
-                       } else if (time_after_eq(jiffies,
-                                               ahcd->next_statechange)
-                                       && !ahcd->ed_rm_list
-                                       && !(ahcd->hc_control &
-                                               OHCI_SCHED_ENABLES)) {
-                               ahcd_rh_suspend(ahcd, 1);
-                       }
-               }
-               break;
-
-       /* if there is a port change, autostart or ask to be resumed */
-       case OHCI_USB_SUSPEND:
-       case OHCI_USB_RESUME:
-               if (changed) {
-                       if (ahcd->autostop)
-                               admhc_rh_resume(ahcd);
-                       else
-                               usb_hcd_resume_root_hub(admhcd_to_hcd(ahcd));
-               } else {
-                       /* everything is idle, no need for polling */
-                       poll_rh = 0;
-               }
-               break;
-       }
-       return poll_rh;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* must not be called from interrupt context */
-static int admhc_restart(struct admhcd *ahcd)
-{
-       int temp;
-       int i;
-       struct urb_priv *priv;
-
-       /* mark any devices gone, so they do nothing till khubd disconnects.
-        * recycle any "live" eds/tds (and urbs) right away.
-        * later, khubd disconnect processing will recycle the other state,
-        * (either as disconnect/reconnect, or maybe someday as a reset).
-        */
-       spin_lock_irq(&ahcd->lock);
-       admhc_disable(ahcd);
-       usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub);
-       if (!list_empty(&ahcd->pending))
-               admhc_dbg(ahcd, "abort schedule...\n");
-               list_for_each_entry(priv, &ahcd->pending, pending) {
-               struct urb      *urb = priv->td[0]->urb;
-               struct ed       *ed = priv->ed;
-
-               switch (ed->state) {
-               case ED_OPER:
-                       ed->state = ED_UNLINK;
-                       ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
-                       ed_deschedule (ahcd, ed);
-
-                       ed->ed_next = ahcd->ed_rm_list;
-                       ed->ed_prev = NULL;
-                       ahcd->ed_rm_list = ed;
-                       /* FALLTHROUGH */
-               case ED_UNLINK:
-                       break;
-               default:
-                       admhc_dbg(ahcd, "bogus ed %p state %d\n",
-                                       ed, ed->state);
-               }
-
-               if (!urb->unlinked)
-                       urb->unlinked = -ESHUTDOWN;
-       }
-       finish_unlinks(ahcd, 0);
-       spin_unlock_irq(&ahcd->lock);
-
-       /* paranoia, in case that didn't work: */
-
-       /* empty the interrupt branches */
-       for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0;
-       for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0;
-
-       /* no EDs to remove */
-       ahcd->ed_rm_list = NULL;
-
-       /* empty control and bulk lists */
-       ahcd->ed_controltail = NULL;
-       ahcd->ed_bulktail    = NULL;
-
-       if ((temp = admhc_run(ahcd)) < 0) {
-               admhc_err(ahcd, "can't restart, %d\n", temp);
-               return temp;
-       } else {
-               /* here we "know" root ports should always stay powered,
-                * and that if we try to turn them back on the root hub
-                * will respond to CSC processing.
-                */
-               i = ahcd->num_ports;
-               while (i--)
-                       admhc_writel(ahcd, RH_PS_PSS,
-                               &ahcd->regs->portstatus[i]);
-               admhc_dbg(ahcd, "restart complete\n");
-       }
-       return 0;
-}
-
-#else  /* CONFIG_PM */
-
-static inline int admhc_rh_resume(struct admhcd *ahcd)
-{
-       return 0;
-}
-
-/* Carry out polling-related state changes.
- * autostop isn't used when CONFIG_PM is turned off.
- */
-static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
-               int any_connected)
-{
-       /* If INSM is enabled, don't poll */
-       if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM)
-               return 0;
-
-       /* If no status changes are pending, enable status-change interrupts */
-       if (!changed) {
-               admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
-               return 0;
-       }
-
-       return 1;
-}
-
-#endif /* CONFIG_PM */
-
diff --git a/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-q.c b/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120-q.c
deleted file mode 100644 (file)
index cd9c892..0000000
+++ /dev/null
@@ -1,964 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-q.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/irq.h>
-#include <linux/slab.h>
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * URB goes back to driver, and isn't reissued.
- * It's completely gone from HC data structures.
- * PRECONDITION:  ahcd lock held, irqs blocked.
- */
-static void
-finish_urb(struct admhcd *ahcd, struct urb *urb, int status)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       urb_priv_free(ahcd, urb->hcpriv);
-
-       if (likely(status == -EINPROGRESS))
-               status = 0;
-
-       switch (usb_pipetype(urb->pipe)) {
-       case PIPE_ISOCHRONOUS:
-               admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--;
-               break;
-       case PIPE_INTERRUPT:
-               admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--;
-               break;
-       }
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       urb_print(ahcd, urb, "RET", usb_pipeout(urb->pipe), status);
-#endif
-
-       /* urb->complete() can reenter this HCD */
-       usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
-       spin_unlock(&ahcd->lock);
-       usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status);
-       spin_lock(&ahcd->lock);
-}
-
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* search for the right schedule branch to use for a periodic ed.
- * does some load balancing; returns the branch, or negative errno.
- */
-static int balance(struct admhcd *ahcd, int interval, int load)
-{
-       int     i, branch = -ENOSPC;
-
-       /* iso periods can be huge; iso tds specify frame numbers */
-       if (interval > NUM_INTS)
-               interval = NUM_INTS;
-
-       /* search for the least loaded schedule branch of that period
-        * that has enough bandwidth left unreserved.
-        */
-       for (i = 0; i < interval ; i++) {
-               if (branch < 0 || ahcd->load[branch] > ahcd->load[i]) {
-                       int     j;
-
-                       /* usb 1.1 says 90% of one frame */
-                       for (j = i; j < NUM_INTS; j += interval) {
-                               if ((ahcd->load[j] + load) > 900)
-                                       break;
-                       }
-                       if (j < NUM_INTS)
-                               continue;
-                       branch = i;
-               }
-       }
-       return branch;
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* both iso and interrupt requests have periods; this routine puts them
- * into the schedule tree in the apppropriate place.  most iso devices use
- * 1msec periods, but that's not required.
- */
-static void periodic_link(struct admhcd *ahcd, struct ed *ed)
-{
-       unsigned        i;
-
-       admhc_vdbg(ahcd, "link %sed %p branch %d [%dus.], interval %d\n",
-               (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
-               ed, ed->branch, ed->load, ed->interval);
-
-       for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
-               struct ed       **prev = &ahcd->periodic[i];
-               __hc32          *prev_p = &ahcd->hcca->int_table[i];
-               struct ed       *here = *prev;
-
-               /* sorting each branch by period (slow before fast)
-                * lets us share the faster parts of the tree.
-                * (plus maybe: put interrupt eds before iso)
-                */
-               while (here && ed != here) {
-                       if (ed->interval > here->interval)
-                               break;
-                       prev = &here->ed_next;
-                       prev_p = &here->hwNextED;
-                       here = *prev;
-               }
-               if (ed != here) {
-                       ed->ed_next = here;
-                       if (here)
-                               ed->hwNextED = *prev_p;
-                       wmb();
-                       *prev = ed;
-                       *prev_p = cpu_to_hc32(ahcd, ed->dma);
-                       wmb();
-               }
-               ahcd->load[i] += ed->load;
-       }
-       admhcd_to_hcd(ahcd)->self.bandwidth_allocated += ed->load / ed->interval;
-}
-#endif
-
-/* link an ed into the HC chain */
-
-static int ed_schedule(struct admhcd *ahcd, struct ed *ed)
-{
-       struct ed *old_tail;
-
-       if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING)
-               return -EAGAIN;
-
-       ed->state = ED_OPER;
-
-       old_tail = ahcd->ed_tails[ed->type];
-
-       ed->ed_next = old_tail->ed_next;
-       if (ed->ed_next) {
-               ed->ed_next->ed_prev = ed;
-               ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma);
-       }
-       ed->ed_prev = old_tail;
-
-       old_tail->ed_next = ed;
-       old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ahcd->ed_tails[ed->type] = ed;
-
-       admhc_dma_enable(ahcd);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* scan the periodic table to find and unlink this ED */
-static void periodic_unlink(struct admhcd *ahcd, struct ed *ed)
-{
-       int     i;
-
-       for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
-               struct ed       *temp;
-               struct ed       **prev = &ahcd->periodic[i];
-               __hc32          *prev_p = &ahcd->hcca->int_table[i];
-
-               while (*prev && (temp = *prev) != ed) {
-                       prev_p = &temp->hwNextED;
-                       prev = &temp->ed_next;
-               }
-               if (*prev) {
-                       *prev_p = ed->hwNextED;
-                       *prev = ed->ed_next;
-               }
-               ahcd->load[i] -= ed->load;
-       }
-
-       admhcd_to_hcd(ahcd)->self.bandwidth_allocated -= ed->load / ed->interval;
-       admhc_vdbg(ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n",
-               (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
-               ed, ed->branch, ed->load, ed->interval);
-}
-#endif
-
-/* unlink an ed from the HC chain.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed
- * (assuming it already started that, which needn't be true).
- *
- * ED_UNLINK is a transient state: the HC may still see this ED, but soon
- * it won't.  ED_SKIP means the HC will finish its current transaction,
- * but won't start anything new.  The TD queue may still grow; device
- * drivers don't know about this HCD-internal state.
- *
- * When the HC can't see the ED, something changes ED_UNLINK to one of:
- *
- *  - ED_OPER: when there's any request queued, the ED gets rescheduled
- *    immediately.  HC should be working on them.
- *
- *  - ED_IDLE:  when there's no TD queue. there's no reason for the HC
- *    to care about this ED; safe to disable the endpoint.
- *
- * When finish_unlinks() runs later, after SOF interrupt, it will often
- * complete one or more URB unlinks before making that state change.
- */
-static void ed_deschedule(struct admhcd *ahcd, struct ed *ed)
-{
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ED-DESCHED", ed, 1);
-#endif
-
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->state = ED_UNLINK;
-
-       /* remove this ED from the HC list */
-       ed->ed_prev->hwNextED = ed->hwNextED;
-
-       /* and remove it from our list also */
-       ed->ed_prev->ed_next = ed->ed_next;
-
-       if (ed->ed_next)
-               ed->ed_next->ed_prev = ed->ed_prev;
-
-       if (ahcd->ed_tails[ed->type] == ed)
-               ahcd->ed_tails[ed->type] = ed->ed_prev;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info)
-{
-       struct ed *ed;
-       struct td *td;
-
-       ed = ed_alloc(ahcd, GFP_ATOMIC);
-       if (!ed)
-               goto err;
-
-       /* dummy td; end of td list for this ed */
-       td = td_alloc(ahcd, GFP_ATOMIC);
-       if (!td)
-               goto err_free_ed;
-
-       switch (type) {
-       case PIPE_INTERRUPT:
-               info |= ED_INT;
-               break;
-       case PIPE_ISOCHRONOUS:
-               info |= ED_ISO;
-               break;
-       }
-
-       ed->dummy = td;
-       ed->state = ED_IDLE;
-       ed->type = type;
-
-       ed->hwINFO = cpu_to_hc32(ahcd, info);
-       ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma);
-       ed->hwHeadP = ed->hwTailP;      /* ED_C, ED_H zeroed */
-
-       return ed;
-
-err_free_ed:
-       ed_free(ahcd, ed);
-err:
-       return NULL;
-}
-
-/* get and maybe (re)init an endpoint. init _should_ be done only as part
- * of enumeration, usb_set_configuration() or usb_set_interface().
- */
-static struct ed *ed_get(struct admhcd *ahcd,  struct usb_host_endpoint *ep,
-       struct usb_device *udev, unsigned int pipe, int interval)
-{
-       struct ed               *ed;
-       unsigned long           flags;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       ed = ep->hcpriv;
-       if (!ed) {
-               u32             info;
-
-               /* FIXME: usbcore changes dev->devnum before SET_ADDRESS
-                * succeeds ... otherwise we wouldn't need "pipe".
-                */
-               info = usb_pipedevice(pipe);
-               info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT;
-               info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT;
-               if (udev->speed == USB_SPEED_FULL)
-                       info |= ED_SPEED_FULL;
-
-               ed = ed_create(ahcd, usb_pipetype(pipe), info);
-               if (ed)
-                       ep->hcpriv = ed;
-       }
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return ed;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* request unlinking of an endpoint from an operational HC.
- * put the ep on the rm_list
- * real work is done at the next start frame (SOFI) hardware interrupt
- * caller guarantees HCD is running, so hardware access is safe,
- * and that ed->state is ED_OPER
- */
-static void start_ed_unlink(struct admhcd *ahcd, struct ed *ed)
-{
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ED-UNLINK", ed, 1);
-#endif
-
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
-       ed_deschedule(ahcd, ed);
-
-       /* add this ED into the remove list */
-       ed->ed_rm_next = ahcd->ed_rm_list;
-       ahcd->ed_rm_list = ed;
-
-       /* enable SOF interrupt */
-       admhc_intr_ack(ahcd, ADMHC_INTR_SOFI);
-       admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* SOF interrupt might get delayed; record the frame counter value that
-        * indicates when the HC isn't looking at it, so concurrent unlinks
-        * behave.  frame_no wraps every 2^16 msec, and changes right before
-        * SOF is triggered.
-        */
-       ed->tick = admhc_frame_no(ahcd) + 1;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void
-td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len,
-       struct urb *urb, int index)
-{
-       struct td               *td, *td_pt;
-       struct urb_priv         *urb_priv = urb->hcpriv;
-       int                     hash;
-       u32                     cbl = 0;
-
-#if 1
-       if (index == (urb_priv->td_cnt - 1) &&
-                       ((urb->transfer_flags & URB_NO_INTERRUPT) == 0))
-               cbl |= TD_IE;
-#else
-       if (index == (urb_priv->td_cnt - 1))
-               cbl |= TD_IE;
-#endif
-
-       /* use this td as the next dummy */
-       td_pt = urb_priv->td[index];
-
-       /* fill the old dummy TD */
-       td = urb_priv->td[index] = urb_priv->ed->dummy;
-       urb_priv->ed->dummy = td_pt;
-
-       td->ed = urb_priv->ed;
-       td->next_dl_td = NULL;
-       td->index = index;
-       td->urb = urb;
-       td->data_dma = data;
-       if (!len)
-               data = 0;
-
-       if (data)
-               cbl |= (len & TD_BL_MASK);
-
-       info |= TD_OWN;
-
-       /* setup hardware specific fields */
-       td->hwINFO = cpu_to_hc32(ahcd, info);
-       td->hwDBP = cpu_to_hc32(ahcd, data);
-       td->hwCBL = cpu_to_hc32(ahcd, cbl);
-       td->hwNextTD = cpu_to_hc32(ahcd, td_pt->td_dma);
-
-       /* append to queue */
-       list_add_tail(&td->td_list, &td->ed->td_list);
-
-       /* hash it for later reverse mapping */
-       hash = TD_HASH_FUNC(td->td_dma);
-       td->td_hash = ahcd->td_hash[hash];
-       ahcd->td_hash[hash] = td;
-
-       /* HC might read the TD (or cachelines) right away ... */
-       wmb();
-       td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Prepare all TDs of a transfer, and queue them onto the ED.
- * Caller guarantees HC is active.
- * Usually the ED is already on the schedule, so TDs might be
- * processed as soon as they're queued.
- */
-static void td_submit_urb(struct admhcd *ahcd, struct urb *urb)
-{
-       struct urb_priv *urb_priv = urb->hcpriv;
-       dma_addr_t      data;
-       int             data_len = urb->transfer_buffer_length;
-       int             cnt = 0;
-       u32             info = 0;
-       int             is_out = usb_pipeout(urb->pipe);
-       u32             toggle = 0;
-
-       /* OHCI handles the bulk/interrupt data toggles itself.  We just
-        * use the device toggle bits for resetting, and rely on the fact
-        * that resetting toggle is meaningless if the endpoint is active.
-        */
-
-       if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) {
-               toggle = TD_T_CARRY;
-       } else {
-               toggle = TD_T_DATA0;
-               usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe),
-                       is_out, 1);
-       }
-
-       urb_priv->td_idx = 0;
-       list_add(&urb_priv->pending, &ahcd->pending);
-
-       if (data_len)
-               data = urb->transfer_dma;
-       else
-               data = 0;
-
-       /* NOTE:  TD_CC is set so we can tell which TDs the HC processed by
-        * using TD_CC_GET, as well as by seeing them on the done list.
-        * (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
-        */
-       switch (urb_priv->ed->type) {
-       case PIPE_INTERRUPT:
-               info = is_out
-                       ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               /* setup service interval and starting frame number */
-               info |= (urb->start_frame & TD_FN_MASK);
-               info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT;
-
-               td_fill(ahcd, info, data, data_len, urb, cnt);
-               cnt++;
-
-               admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++;
-               break;
-
-       case PIPE_BULK:
-               info = is_out
-                       ? TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               /* TDs _could_ transfer up to 8K each */
-               while (data_len > TD_DATALEN_MAX) {
-                       td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
-                               data, TD_DATALEN_MAX, urb, cnt);
-                       data += TD_DATALEN_MAX;
-                       data_len -= TD_DATALEN_MAX;
-                       cnt++;
-               }
-
-               td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data,
-                       data_len, urb, cnt);
-               cnt++;
-
-               if ((urb->transfer_flags & URB_ZERO_PACKET)
-                               && (cnt < urb_priv->td_cnt)) {
-                       td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
-                               0, 0, urb, cnt);
-                       cnt++;
-               }
-               break;
-
-       /* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
-        * any DATA phase works normally, and the STATUS ack is special.
-        */
-       case PIPE_CONTROL:
-               /* fill a TD for the setup */
-               info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0;
-               td_fill(ahcd, info, urb->setup_dma, 8, urb, cnt++);
-
-               if (data_len > 0) {
-                       /* fill a TD for the data */
-                       info = TD_SCC_NOTACCESSED | TD_T_DATA1;
-                       info |= is_out ? TD_DP_OUT : TD_DP_IN;
-                       /* NOTE:  mishandles transfers >8K, some >4K */
-                       td_fill(ahcd, info, data, data_len, urb, cnt++);
-               }
-
-               /* fill a TD for the ACK */
-               info = (is_out || data_len == 0)
-                       ? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1
-                       : TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1;
-               td_fill(ahcd, info, data, 0, urb, cnt++);
-
-               break;
-
-       /* ISO has no retransmit, so no toggle;
-        * Each TD could handle multiple consecutive frames (interval 1);
-        * we could often reduce the number of TDs here.
-        */
-       case PIPE_ISOCHRONOUS:
-               info = is_out
-                       ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
-                       int frame = urb->start_frame;
-
-                       frame += cnt * urb->interval;
-                       frame &= TD_FN_MASK;
-                       td_fill(ahcd, info | frame,
-                               data + urb->iso_frame_desc[cnt].offset,
-                               urb->iso_frame_desc[cnt].length, urb, cnt);
-               }
-               admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++;
-               break;
-       }
-
-       if (urb_priv->td_cnt != cnt)
-               admhc_err(ahcd, "bad number of tds created for urb %p\n", urb);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-/* calculate transfer length/status and update the urb */
-static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
-{
-       struct urb_priv *urb_priv = urb->hcpriv;
-       u32     info;
-       u32     bl;
-       u32     tdDBP;
-       int     type = usb_pipetype(urb->pipe);
-       int     cc;
-       int     status = -EINPROGRESS;
-
-       info = hc32_to_cpup(ahcd, &td->hwINFO);
-       tdDBP = hc32_to_cpup(ahcd, &td->hwDBP);
-       bl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL));
-       cc = TD_CC_GET(info);
-
-       /* ISO ... drivers see per-TD length/status */
-       if (type == PIPE_ISOCHRONOUS) {
-               /* TODO */
-               int     dlen = 0;
-
-               /* NOTE:  assumes FC in tdINFO == 0, and that
-                * only the first of 0..MAXPSW psws is used.
-                */
-               if (info & TD_CC)       /* hc didn't touch? */
-                       return status;
-
-               if (usb_pipeout(urb->pipe))
-                       dlen = urb->iso_frame_desc[td->index].length;
-               else {
-                       /* short reads are always OK for ISO */
-                       if (cc == TD_CC_DATAUNDERRUN)
-                               cc = TD_CC_NOERROR;
-                       dlen = tdDBP - td->data_dma + bl;
-               }
-
-               urb->actual_length += dlen;
-               urb->iso_frame_desc[td->index].actual_length = dlen;
-               urb->iso_frame_desc[td->index].status = cc_to_error[cc];
-
-               if (cc != TD_CC_NOERROR)
-                       admhc_vdbg(ahcd,
-                               "urb %p iso td %p (%d) len %d cc %d\n",
-                               urb, td, 1 + td->index, dlen, cc);
-
-       /* BULK, INT, CONTROL ... drivers see aggregate length/status,
-        * except that "setup" bytes aren't counted and "short" transfers
-        * might not be reported as errors.
-        */
-       } else {
-               /* update packet status if needed (short is normally ok) */
-               if (cc == TD_CC_DATAUNDERRUN
-                               && !(urb->transfer_flags & URB_SHORT_NOT_OK))
-                       cc = TD_CC_NOERROR;
-
-               if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
-                       status = cc_to_error[cc];
-
-
-               /* count all non-empty packets except control SETUP packet */
-               if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0)
-                       urb->actual_length += tdDBP - td->data_dma + bl;
-
-               if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
-                       admhc_vdbg(ahcd,
-                               "urb %p td %p (%d) cc %d, len=%d/%d\n",
-                               urb, td, td->index, cc,
-                               urb->actual_length,
-                               urb->transfer_buffer_length);
-       }
-
-       list_del(&td->td_list);
-       urb_priv->td_idx++;
-
-       return status;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void ed_halted(struct admhcd *ahcd, struct td *td, int cc)
-{
-       struct urb              *urb = td->urb;
-       struct urb_priv         *urb_priv = urb->hcpriv;
-       struct ed               *ed = td->ed;
-       struct list_head        *tmp = td->td_list.next;
-       __hc32                  toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-       admhc_dump_ed(ahcd, "ed halted", td->ed, 1);
-       /* clear ed halt; this is the td that caused it, but keep it inactive
-        * until its urb->complete() has a chance to clean up.
-        */
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-
-       /* Get rid of all later tds from this urb. We don't have
-        * to be careful: no errors and nothing was transferred.
-        * Also patch the ed so it looks as if those tds completed normally.
-        */
-       while (tmp != &ed->td_list) {
-               struct td       *next;
-
-               next = list_entry(tmp, struct td, td_list);
-               tmp = next->td_list.next;
-
-               if (next->urb != urb)
-                       break;
-
-               /* NOTE: if multi-td control DATA segments get supported,
-                * this urb had one of them, this td wasn't the last td
-                * in that segment (TD_R clear), this ed halted because
-                * of a short read, _and_ URB_SHORT_NOT_OK is clear ...
-                * then we need to leave the control STATUS packet queued
-                * and clear ED_SKIP.
-                */
-               list_del(&next->td_list);
-               urb_priv->td_cnt++;
-               ed->hwHeadP = next->hwNextTD | toggle;
-       }
-
-       /* help for troubleshooting:  report anything that
-        * looks odd ... that doesn't include protocol stalls
-        * (or maybe some other things)
-        */
-       switch (cc) {
-       case TD_CC_DATAUNDERRUN:
-               if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
-                       break;
-               /* fallthrough */
-       case TD_CC_STALL:
-               if (usb_pipecontrol(urb->pipe))
-                       break;
-               /* fallthrough */
-       default:
-               admhc_dbg(ahcd,
-                       "urb %p path %s ep%d%s %08x cc %d --> status %d\n",
-                       urb, urb->dev->devpath,
-                       usb_pipeendpoint (urb->pipe),
-                       usb_pipein(urb->pipe) ? "in" : "out",
-                       hc32_to_cpu(ahcd, td->hwINFO),
-                       cc, cc_to_error[cc]);
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
-static void
-finish_unlinks(struct admhcd *ahcd, u16 tick)
-{
-       struct ed       *ed, **last;
-
-rescan_all:
-       for (last = &ahcd->ed_rm_list, ed = *last; ed != NULL; ed = *last) {
-               struct list_head        *entry, *tmp;
-               int                     completed, modified;
-               __hc32                  *prev;
-
-               /* only take off EDs that the HC isn't using, accounting for
-                * frame counter wraps and EDs with partially retired TDs
-                */
-               if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))) {
-                       if (tick_before(tick, ed->tick)) {
-skip_ed:
-                               last = &ed->ed_rm_next;
-                               continue;
-                       }
-#if 0
-                       if (!list_empty(&ed->td_list)) {
-                               struct td       *td;
-                               u32             head;
-
-                               td = list_entry(ed->td_list.next, struct td,
-                                                       td_list);
-                               head = hc32_to_cpu(ahcd, ed->hwHeadP) &
-                                                               TD_MASK;
-
-                               /* INTR_WDH may need to clean up first */
-                               if (td->td_dma != head)
-                                       goto skip_ed;
-                       }
-#endif
-               }
-
-               /* reentrancy:  if we drop the schedule lock, someone might
-                * have modified this list.  normally it's just prepending
-                * entries (which we'd ignore), but paranoia won't hurt.
-                */
-               *last = ed->ed_rm_next;
-               ed->ed_rm_next = NULL;
-               modified = 0;
-
-               /* unlink urbs as requested, but rescan the list after
-                * we call a completion since it might have unlinked
-                * another (earlier) urb
-                *
-                * When we get here, the HC doesn't see this ed.  But it
-                * must not be rescheduled until all completed URBs have
-                * been given back to the driver.
-                */
-rescan_this:
-               completed = 0;
-               prev = &ed->hwHeadP;
-               list_for_each_safe(entry, tmp, &ed->td_list) {
-                       struct td       *td;
-                       struct urb      *urb;
-                       struct urb_priv *urb_priv;
-                       __hc32          savebits;
-                       u32             tdINFO;
-                       int             status;
-
-                       td = list_entry(entry, struct td, td_list);
-                       urb = td->urb;
-                       urb_priv = td->urb->hcpriv;
-
-                       if (!urb->unlinked) {
-                               prev = &td->hwNextTD;
-                               continue;
-                       }
-
-                       if ((urb_priv) == NULL)
-                               continue;
-
-                       /* patch pointer hc uses */
-                       savebits = *prev & ~cpu_to_hc32(ahcd, TD_MASK);
-                       *prev = td->hwNextTD | savebits;
-                       /* If this was unlinked, the TD may not have been
-                        * retired ... so manually save dhe data toggle.
-                        * The controller ignores the value we save for
-                        * control and ISO endpoints.
-                        */
-                       tdINFO = hc32_to_cpup(ahcd, &td->hwINFO);
-                       if ((tdINFO & TD_T) == TD_T_DATA0)
-                               ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_C);
-                       else if ((tdINFO & TD_T) == TD_T_DATA1)
-                               ed->hwHeadP |= cpu_to_hc32(ahcd, ED_C);
-
-                       /* HC may have partly processed this TD */
-#ifdef ADMHC_VERBOSE_DEBUG
-                       urb_print(ahcd, urb, "PARTIAL", 0);
-#endif
-                       status = td_done(ahcd, urb, td);
-
-                       /* if URB is done, clean up */
-                       if (urb_priv->td_idx == urb_priv->td_cnt) {
-                               modified = completed = 1;
-                               finish_urb(ahcd, urb, status);
-                       }
-               }
-               if (completed && !list_empty(&ed->td_list))
-                       goto rescan_this;
-
-               /* ED's now officially unlinked, hc doesn't see */
-               ed->state = ED_IDLE;
-               ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-               ed->hwNextED = 0;
-               wmb();
-               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP | ED_DEQUEUE);
-
-               /* but if there's work queued, reschedule */
-               if (!list_empty(&ed->td_list)) {
-                       if (HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))
-                               ed_schedule(ahcd, ed);
-               }
-
-               if (modified)
-                       goto rescan_all;
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-/*
- * Process normal completions (error or success) and clean the schedules.
- *
- * This is the main path for handing urbs back to drivers.  The only other
- * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list,
- * instead of scanning the (re-reversed) donelist as this does.
- */
-
-static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb)
-{
-       struct list_head *entry, *tmp;
-       __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "UNHALT", ed, 0);
-#endif
-       /* clear ed halt; this is the td that caused it, but keep it inactive
-        * until its urb->complete() has a chance to clean up.
-        */
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-
-       list_for_each_safe(entry, tmp, &ed->td_list) {
-               struct td *td = list_entry(entry, struct td, td_list);
-               __hc32 info;
-
-               if (td->urb != urb)
-                       break;
-
-               info = td->hwINFO;
-               info &= ~cpu_to_hc32(ahcd, TD_CC | TD_OWN);
-               td->hwINFO = info;
-
-               ed->hwHeadP = td->hwNextTD | toggle;
-               wmb();
-       }
-
-}
-
-static void ed_intr_refill(struct admhcd *ahcd, struct ed *ed)
-{
-       __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-       ed->hwHeadP = ed->hwTailP | toggle;
-}
-
-
-static inline int is_ed_halted(struct admhcd *ahcd, struct ed *ed)
-{
-       return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) == ED_H);
-}
-
-static inline int is_td_halted(struct admhcd *ahcd, struct ed *ed,
-               struct td *td)
-{
-       return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & TD_MASK) ==
-               (hc32_to_cpup(ahcd, &td->hwNextTD) & TD_MASK));
-}
-
-static void ed_update(struct admhcd *ahcd, struct ed *ed)
-{
-       struct list_head *entry, *tmp;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "UPDATE", ed, 1);
-#endif
-
-       list_for_each_safe(entry, tmp, &ed->td_list) {
-               struct td *td = list_entry(entry, struct td, td_list);
-               struct urb *urb = td->urb;
-               struct urb_priv *urb_priv = urb->hcpriv;
-               int status;
-
-               if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
-                       break;
-
-               /* update URB's length and status from TD */
-               status = td_done(ahcd, urb, td);
-               if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td))
-                       ed_unhalt(ahcd, ed, urb);
-
-               if (ed->type == PIPE_INTERRUPT)
-                       ed_intr_refill(ahcd, ed);
-
-               /* If all this urb's TDs are done, call complete() */
-               if (urb_priv->td_idx == urb_priv->td_cnt)
-                       finish_urb(ahcd, urb, status);
-
-               /* clean schedule:  unlink EDs that are no longer busy */
-               if (list_empty(&ed->td_list)) {
-                       if (ed->state == ED_OPER)
-                               start_ed_unlink(ahcd, ed);
-
-               /* ... reenabling halted EDs only after fault cleanup */
-               } else if ((ed->hwINFO & cpu_to_hc32(ahcd,
-                                               ED_SKIP | ED_DEQUEUE))
-                                       == cpu_to_hc32(ahcd, ED_SKIP)) {
-                       td = list_entry(ed->td_list.next, struct td, td_list);
-#if 0
-                       if (!(td->hwINFO & cpu_to_hc32(ahcd, TD_DONE))) {
-                               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
-                               /* ... hc may need waking-up */
-                               switch (ed->type) {
-                               case PIPE_CONTROL:
-                                       admhc_writel(ahcd, OHCI_CLF,
-                                               &ahcd->regs->cmdstatus);
-                                       break;
-                               case PIPE_BULK:
-                                       admhc_writel(ahcd, OHCI_BLF,
-                                               &ahcd->regs->cmdstatus);
-                                       break;
-                               }
-                       }
-#else
-                       if ((td->hwINFO & cpu_to_hc32(ahcd, TD_OWN)))
-                               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
-#endif
-               }
-
-       }
-}
-
-/* there are some tds completed; called in_irq(), with HCD locked */
-static void admhc_td_complete(struct admhcd *ahcd)
-{
-       struct ed       *ed;
-
-       for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
-               if (ed->state != ED_OPER)
-                       continue;
-
-               ed_update(ahcd, ed);
-       }
-}
diff --git a/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120.h b/target/linux/adm5120/files-3.14/drivers/usb/host/adm5120.h
deleted file mode 100644 (file)
index e47aac8..0000000
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci.h
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*
- * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
- * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
- * host controller implementation.
- */
-typedef __u32 __bitwise __hc32;
-typedef __u16 __bitwise __hc16;
-
-/*
- * OHCI Endpoint Descriptor (ED) ... holds TD queue
- * See OHCI spec, section 4.2
- *
- * This is a "Queue Head" for those transfers, which is why
- * both EHCI and UHCI call similar structures a "QH".
- */
-
-#define TD_DATALEN_MAX 4096
-
-#define ED_ALIGN       16
-#define ED_MASK        ((u32)~(ED_ALIGN-1))    /* strip hw status in low addr bits */
-
-struct ed {
-       /* first fields are hardware-specified */
-       __hc32                  hwINFO;      /* endpoint config bitmap */
-       /* info bits defined by hcd */
-#define ED_DEQUEUE     (1 << 27)
-       /* info bits defined by the hardware */
-#define ED_MPS_SHIFT   16
-#define ED_MPS_MASK    ((1 << 11)-1)
-#define ED_MPS_GET(x)  (((x) >> ED_MPS_SHIFT) & ED_MPS_MASK)
-#define ED_ISO         (1 << 15)               /* isochronous endpoint */
-#define ED_SKIP                (1 << 14)
-#define ED_SPEED_FULL  (1 << 13)               /* fullspeed device */
-#define ED_INT         (1 << 11)               /* interrupt endpoint */
-#define ED_EN_SHIFT    7                       /* endpoint shift */
-#define ED_EN_MASK     ((1 << 4)-1)            /* endpoint mask */
-#define ED_EN_GET(x)   (((x) >> ED_EN_SHIFT) & ED_EN_MASK)
-#define ED_FA_MASK     ((1 << 7)-1)            /* function address mask */
-#define ED_FA_GET(x)   ((x) & ED_FA_MASK)
-       __hc32                  hwTailP;        /* tail of TD list */
-       __hc32                  hwHeadP;        /* head of TD list (hc r/w) */
-#define ED_C           (0x02)                  /* toggle carry */
-#define ED_H           (0x01)                  /* halted */
-       __hc32                  hwNextED;       /* next ED in list */
-
-       /* rest are purely for the driver's use */
-       dma_addr_t              dma;            /* addr of ED */
-       struct td               *dummy;         /* next TD to activate */
-
-       struct list_head        urb_list;       /* list of our URBs */
-
-       /* host's view of schedule */
-       struct ed               *ed_next;       /* on schedule list */
-       struct ed               *ed_prev;       /* for non-interrupt EDs */
-       struct ed               *ed_rm_next;    /* on rm list */
-       struct list_head        td_list;        /* "shadow list" of our TDs */
-
-       /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
-        * usually:  OPER --> UNLINK --> (IDLE | OPER) --> ...
-        */
-       u8                      state;          /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE                0x00            /* NOT linked to HC */
-#define ED_UNLINK      0x01            /* being unlinked from hc */
-#define ED_OPER                0x02            /* IS linked to hc */
-
-       u8                      type;           /* PIPE_{BULK,...} */
-
-       /* periodic scheduling params (for intr and iso) */
-       u8                      branch;
-       u16                     interval;
-       u16                     load;
-       u16                     last_iso;       /* iso only */
-
-       /* HC may see EDs on rm_list until next frame (frame_no == tick) */
-       u16                     tick;
-} __attribute__ ((aligned(ED_ALIGN)));
-
-/*
- * OHCI Transfer Descriptor (TD) ... one per transfer segment
- * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
- * and 4.3.2 (iso)
- */
-
-#define TD_ALIGN       32
-#define TD_MASK        ((u32)~(TD_ALIGN-1))    /* strip hw status in low addr bits */
-
-struct td {
-       /* first fields are hardware-specified */
-       __hc32          hwINFO;         /* transfer info bitmask */
-
-       /* hwINFO bits */
-#define TD_OWN         (1 << 31)               /* owner of the descriptor */
-#define TD_CC_SHIFT    27                      /* condition code */
-#define TD_CC_MASK     0xf
-#define TD_CC          (TD_CC_MASK << TD_CC_SHIFT)
-#define TD_CC_GET(x)   (((x) >> TD_CC_SHIFT) & TD_CC_MASK)
-
-#define TD_EC_SHIFT    25                      /* error count */
-#define TD_EC_MASK     0x3
-#define TD_EC          (TD_EC_MASK << TD_EC_SHIFT)
-#define TD_EC_GET(x)   ((x >> TD_EC_SHIFT) & TD_EC_MASK)
-#define TD_T_SHIFT     23                      /* data toggle state */
-#define TD_T_MASK      0x3
-#define TD_T           (TD_T_MASK << TD_T_SHIFT)
-#define TD_T_DATA0     (0x2 << TD_T_SHIFT)     /* DATA0 */
-#define TD_T_DATA1     (0x3 << TD_T_SHIFT)     /* DATA1 */
-#define TD_T_CARRY     (0x0 << TD_T_SHIFT)     /* uses ED_C */
-#define TD_T_GET(x)    (((x) >> TD_T_SHIFT) & TD_T_MASK)
-#define TD_DP_SHIFT    21                      /* direction/pid */
-#define TD_DP_MASK     0x3
-#define TD_DP          (TD_DP_MASK << TD_DP_SHIFT)
-#define TD_DP_GET      (((x) >> TD_DP_SHIFT) & TD_DP_MASK)
-#define TD_DP_SETUP    (0x0 << TD_DP_SHIFT)    /* SETUP pid */
-#define TD_DP_OUT      (0x1 << TD_DP_SHIFT)    /* OUT pid */
-#define TD_DP_IN       (0x2 << TD_DP_SHIFT)    /* IN pid */
-#define TD_ISI_SHIFT   8                       /* Interrupt Service Interval */
-#define TD_ISI_MASK    0x3f
-#define TD_ISI_GET(x)  (((x) >> TD_ISI_SHIFT) & TD_ISI_MASK)
-#define TD_FN_MASK     0x3f                    /* frame number */
-#define TD_FN_GET(x)   ((x) & TD_FN_MASK)
-
-       __hc32          hwDBP;          /* Data Buffer Pointer (or 0) */
-       __hc32          hwCBL;          /* Controller/Buffer Length */
-
-       /* hwCBL bits */
-#define TD_BL_MASK     0xffff          /* buffer length */
-#define TD_BL_GET(x)   ((x) & TD_BL_MASK)
-#define TD_IE          (1 << 16)       /* interrupt enable */
-       __hc32          hwNextTD;       /* Next TD Pointer */
-
-       /* rest are purely for the driver's use */
-       __u8            index;
-       struct ed       *ed;
-       struct td       *td_hash;       /* dma-->td hashtable */
-       struct td       *next_dl_td;
-       struct urb      *urb;
-
-       dma_addr_t      td_dma;         /* addr of this TD */
-       dma_addr_t      data_dma;       /* addr of data it points to */
-
-       struct list_head td_list;       /* "shadow list", TDs on same ED */
-
-       u32             flags;
-#define TD_FLAG_DONE   (1 << 17)       /* retired to done list */
-#define TD_FLAG_ISO    (1 << 16)       /* copy of ED_ISO */
-} __attribute__ ((aligned(TD_ALIGN))); /* c/b/i need 16; only iso needs 32 */
-
-/*
- * Hardware transfer status codes -- CC from td->hwINFO
- */
-#define TD_CC_NOERROR          0x00
-#define TD_CC_CRC              0x01
-#define TD_CC_BITSTUFFING      0x02
-#define TD_CC_DATATOGGLEM      0x03
-#define TD_CC_STALL            0x04
-#define TD_CC_DEVNOTRESP       0x05
-#define TD_CC_PIDCHECKFAIL     0x06
-#define TD_CC_UNEXPECTEDPID    0x07
-#define TD_CC_DATAOVERRUN      0x08
-#define TD_CC_DATAUNDERRUN     0x09
-    /* 0x0A, 0x0B reserved for hardware */
-#define TD_CC_BUFFEROVERRUN    0x0C
-#define TD_CC_BUFFERUNDERRUN   0x0D
-    /* 0x0E, 0x0F reserved for HCD */
-#define TD_CC_HCD0             0x0E
-#define TD_CC_NOTACCESSED      0x0F
-
-/*
- * preshifted status codes
- */
-#define TD_SCC_NOTACCESSED     (TD_CC_NOTACCESSED << TD_CC_SHIFT)
-
-
-/* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error[16] = {
-       /* No  Error  */        0,
-       /* CRC Error  */        -EILSEQ,
-       /* Bit Stuff  */        -EPROTO,
-       /* Data Togg  */        -EILSEQ,
-       /* Stall      */        -EPIPE,
-       /* DevNotResp */        -ETIME,
-       /* PIDCheck   */        -EPROTO,
-       /* UnExpPID   */        -EPROTO,
-       /* DataOver   */        -EOVERFLOW,
-       /* DataUnder  */        -EREMOTEIO,
-       /* (for hw)   */        -EIO,
-       /* (for hw)   */        -EIO,
-       /* BufferOver */        -ECOMM,
-       /* BuffUnder  */        -ENOSR,
-       /* (for HCD)  */        -EALREADY,
-       /* (for HCD)  */        -EALREADY
-};
-
-#define NUM_INTS       32
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O region.
- * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
- * Layout is in section 7 (and appendix B) of the spec.
- */
-struct admhcd_regs {
-       __hc32  gencontrol;     /* General Control */
-       __hc32  int_status;     /* Interrupt Status */
-       __hc32  int_enable;     /* Interrupt Enable */
-       __hc32  reserved00;
-       __hc32  host_control;   /* Host General Control */
-       __hc32  reserved01;
-       __hc32  fminterval;     /* Frame Interval */
-       __hc32  fmnumber;       /* Frame Number */
-       __hc32  reserved02;
-       __hc32  reserved03;
-       __hc32  reserved04;
-       __hc32  reserved05;
-       __hc32  reserved06;
-       __hc32  reserved07;
-       __hc32  reserved08;
-       __hc32  reserved09;
-       __hc32  reserved10;
-       __hc32  reserved11;
-       __hc32  reserved12;
-       __hc32  reserved13;
-       __hc32  reserved14;
-       __hc32  reserved15;
-       __hc32  reserved16;
-       __hc32  reserved17;
-       __hc32  reserved18;
-       __hc32  reserved19;
-       __hc32  reserved20;
-       __hc32  reserved21;
-       __hc32  lsthresh;       /* Low Speed Threshold */
-       __hc32  rhdesc;         /* Root Hub Descriptor */
-#define MAX_ROOT_PORTS 2
-       __hc32  portstatus[MAX_ROOT_PORTS]; /* Port Status */
-       __hc32  hosthead;       /* Host Descriptor Head */
-} __attribute__ ((aligned(32)));
-
-/*
- * General Control register bits
- */
-#define ADMHC_CTRL_UHFE        (1 << 0)        /* USB Host Function Enable */
-#define ADMHC_CTRL_SIR (1 << 1)        /* Software Interrupt request */
-#define ADMHC_CTRL_DMAA        (1 << 2)        /* DMA Arbitration Control */
-#define ADMHC_CTRL_SR  (1 << 3)        /* Software Reset */
-
-/*
- * Host General Control register bits
- */
-#define ADMHC_HC_BUSS          0x3             /* USB bus state */
-#define   ADMHC_BUSS_RESET     0x0
-#define   ADMHC_BUSS_RESUME    0x1
-#define   ADMHC_BUSS_OPER      0x2
-#define   ADMHC_BUSS_SUSPEND   0x3
-#define ADMHC_HC_DMAE          (1 << 2)        /* DMA enable */
-
-/*
- * Interrupt Status/Enable register bits
- */
-#define ADMHC_INTR_SOFI        (1 << 4)        /* start of frame */
-#define ADMHC_INTR_RESI        (1 << 5)        /* resume detected */
-#define ADMHC_INTR_6   (1 << 6)        /* unknown */
-#define ADMHC_INTR_7   (1 << 7)        /* unknown */
-#define ADMHC_INTR_BABI        (1 << 8)        /* babble detected */
-#define ADMHC_INTR_INSM        (1 << 9)        /* root hub status change */
-#define ADMHC_INTR_SO  (1 << 10)       /* scheduling overrun */
-#define ADMHC_INTR_FNO (1 << 11)       /* frame number overflow */
-#define ADMHC_INTR_TDC (1 << 20)       /* transfer descriptor completed */
-#define ADMHC_INTR_SWI (1 << 29)       /* software interrupt */
-#define ADMHC_INTR_FATI        (1 << 30)       /* fatal error */
-#define ADMHC_INTR_INTA        (1 << 31)       /* interrupt active */
-
-#define ADMHC_INTR_MIE (1 << 31)       /* master interrupt enable */
-
-/*
- * SOF Frame Interval register bits
- */
-#define ADMHC_SFI_FI_MASK      ((1 << 14)-1)   /* Frame Interval value */
-#define ADMHC_SFI_FSLDP_SHIFT  16
-#define ADMHC_SFI_FSLDP_MASK   ((1 << 15)-1)
-#define ADMHC_SFI_FIT          (1 << 31)       /* Frame Interval Toggle */
-
-/*
- * SOF Frame Number register bits
- */
-#define ADMHC_SFN_FN_MASK      ((1 << 16)-1)   /* Frame Number Mask */
-#define ADMHC_SFN_FR_SHIFT     16              /* Frame Remaining Shift */
-#define ADMHC_SFN_FR_MASK      ((1 << 14)-1)   /* Frame Remaining Mask */
-#define ADMHC_SFN_FRT          (1 << 31)       /* Frame Remaining Toggle */
-
-/*
- * Root Hub Descriptor register bits
- */
-#define ADMHC_RH_NUMP  0xff            /* number of ports */
-#define        ADMHC_RH_PSM    (1 << 8)        /* power switching mode */
-#define        ADMHC_RH_NPS    (1 << 9)        /* no power switching */
-#define        ADMHC_RH_OCPM   (1 << 10)       /* over current protection mode */
-#define        ADMHC_RH_NOCP   (1 << 11)       /* no over current protection */
-#define        ADMHC_RH_PPCM   (0xff << 16)    /* port power control */
-
-#define ADMHC_RH_LPS   (1 << 24)       /* local power switch */
-#define ADMHC_RH_OCI   (1 << 25)       /* over current indicator */
-
-/* status change bits */
-#define ADMHC_RH_LPSC  (1 << 26)       /* local power switch change */
-#define ADMHC_RH_OCIC  (1 << 27)       /* over current indicator change */
-
-#define ADMHC_RH_DRWE  (1 << 28)       /* device remote wakeup enable */
-#define ADMHC_RH_CRWE  (1 << 29)       /* clear remote wakeup enable */
-
-#define ADMHC_RH_CGP   (1 << 24)       /* clear global power */
-#define ADMHC_RH_SGP   (1 << 26)       /* set global power */
-
-/*
- * Port Status register bits
- */
-#define ADMHC_PS_CCS   (1 << 0)        /* current connect status */
-#define ADMHC_PS_PES   (1 << 1)        /* port enable status */
-#define ADMHC_PS_PSS   (1 << 2)        /* port suspend status */
-#define ADMHC_PS_POCI  (1 << 3)        /* port over current indicator */
-#define ADMHC_PS_PRS   (1 << 4)        /* port reset status */
-#define ADMHC_PS_PPS   (1 << 8)        /* port power status */
-#define ADMHC_PS_LSDA  (1 << 9)        /* low speed device attached */
-
-/* status change bits */
-#define ADMHC_PS_CSC   (1 << 16)       /* connect status change */
-#define ADMHC_PS_PESC  (1 << 17)       /* port enable status change */
-#define ADMHC_PS_PSSC  (1 << 18)       /* port suspend status change */
-#define ADMHC_PS_OCIC  (1 << 19)       /* over current indicator change */
-#define ADMHC_PS_PRSC  (1 << 20)       /* port reset status change */
-
-/* port feature bits */
-#define ADMHC_PS_CPE   (1 << 0)        /* clear port enable */
-#define ADMHC_PS_SPE   (1 << 1)        /* set port enable */
-#define ADMHC_PS_SPS   (1 << 2)        /* set port suspend */
-#define ADMHC_PS_CPS   (1 << 3)        /* clear suspend status */
-#define ADMHC_PS_SPR   (1 << 4)        /* set port reset */
-#define ADMHC_PS_SPP   (1 << 8)        /* set port power */
-#define ADMHC_PS_CPP   (1 << 9)        /* clear port power */
-
-/*
- * the POTPGT value is not defined in the ADMHC, so define a dummy value
- */
-#define ADMHC_POTPGT   2               /* in ms */
-
-/* hcd-private per-urb state */
-struct urb_priv {
-       struct ed               *ed;
-       struct list_head        pending;        /* URBs on the same ED */
-
-       u32                     td_cnt;         /* # tds in this request */
-       u32                     td_idx;         /* index of the current td */
-       struct td               *td[0];         /* all TDs in this request */
-};
-
-#define TD_HASH_SIZE    64    /* power'o'two */
-/* sizeof (struct td) ~= 64 == 2^6 ... */
-#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
-
-/*
- * This is the full ADMHCD controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-struct admhcd {
-       spinlock_t              lock;
-
-       /*
-        * I/O memory used to communicate with the HC (dma-consistent)
-        */
-       struct admhcd_regs __iomem *regs;
-
-       /*
-        * hcd adds to schedule for a live hc any time, but removals finish
-        * only at the start of the next frame.
-        */
-
-       struct ed               *ed_head;
-       struct ed               *ed_tails[4];
-
-       struct ed               *ed_rm_list;    /* to be removed */
-
-       struct ed               *periodic[NUM_INTS];    /* shadow int_table */
-
-#if 0  /* TODO: remove? */
-       /*
-        * OTG controllers and transceivers need software interaction;
-        * other external transceivers should be software-transparent
-        */
-       struct otg_transceiver  *transceiver;
-       void (*start_hnp)(struct admhcd *ahcd);
-#endif
-
-       /*
-        * memory management for queue data structures
-        */
-       struct dma_pool         *td_cache;
-       struct dma_pool         *ed_cache;
-       struct td               *td_hash[TD_HASH_SIZE];
-       struct list_head        pending;
-
-       /*
-        * driver state
-        */
-       int                     num_ports;
-       int                     load[NUM_INTS];
-       u32                     host_control;   /* copy of the host_control reg */
-       unsigned long           next_statechange;       /* suspend/resume */
-       u32                     fminterval;             /* saved register */
-       unsigned                autostop:1;     /* rh auto stopping/stopped */
-
-       unsigned long           flags;          /* for HC bugs */
-#define        OHCI_QUIRK_AMD756       0x01                    /* erratum #4 */
-#define        OHCI_QUIRK_SUPERIO      0x02                    /* natsemi */
-#define        OHCI_QUIRK_INITRESET    0x04                    /* SiS, OPTi, ... */
-#define        OHCI_QUIRK_BE_DESC      0x08                    /* BE descriptors */
-#define        OHCI_QUIRK_BE_MMIO      0x10                    /* BE registers */
-#define        OHCI_QUIRK_ZFMICRO      0x20                    /* Compaq ZFMicro chipset*/
-       /* there are also chip quirks/bugs in init logic */
-
-#ifdef DEBUG
-       struct dentry           *debug_dir;
-       struct dentry           *debug_async;
-       struct dentry           *debug_periodic;
-       struct dentry           *debug_registers;
-#endif
-};
-
-/* convert between an hcd pointer and the corresponding ahcd_hcd */
-static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
-{
-       return (struct admhcd *)(hcd->hcd_priv);
-}
-static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd)
-{
-       return container_of((void *)ahcd, struct usb_hcd, hcd_priv);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifndef DEBUG
-#define STUB_DEBUG_FILES
-#endif /* DEBUG */
-
-#ifdef DEBUG
-#      define admhc_dbg(ahcd, fmt, args...) \
-               printk(KERN_DEBUG "adm5120-hcd: " fmt, ## args)
-#else
-#      define admhc_dbg(ahcd, fmt, args...) do { } while (0)
-#endif
-
-#define admhc_err(ahcd, fmt, args...) \
-       printk(KERN_ERR "adm5120-hcd: " fmt, ## args)
-#define admhc_info(ahcd, fmt, args...) \
-       printk(KERN_INFO "adm5120-hcd: " fmt, ## args)
-#define admhc_warn(ahcd, fmt, args...) \
-       printk(KERN_WARNING "adm5120-hcd: " fmt, ## args)
-
-#ifdef ADMHC_VERBOSE_DEBUG
-#      define admhc_vdbg admhc_dbg
-#else
-#      define admhc_vdbg(ahcd, fmt, args...) do { } while (0)
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * While most USB host controllers implement their registers and
- * in-memory communication descriptors in little-endian format,
- * a minority (notably the IBM STB04XXX and the Motorola MPC5200
- * processors) implement them in big endian format.
- *
- * In addition some more exotic implementations like the Toshiba
- * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
- * they have a different endianness for registers vs. in-memory
- * descriptors.
- *
- * This attempts to support either format at compile time without a
- * runtime penalty, or both formats with the additional overhead
- * of checking a flag bit.
- *
- * That leads to some tricky Kconfig rules howevber. There are
- * different defaults based on some arch/ppc platforms, though
- * the basic rules are:
- *
- * Controller type              Kconfig options needed
- * ---------------              ----------------------
- * little endian                CONFIG_USB_ADMHC_LITTLE_ENDIAN
- *
- * fully big endian             CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_
- *                              CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
- *
- * mixed endian                 CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_
- *                              CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
- *
- * (If you have a mixed endian controller, you -must- also define
- * CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building
- * both your mixed endian and a fully big endian controller support in
- * the same kernel image).
- */
-
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC
-#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
-#define big_endian_desc(ahcd)  (ahcd->flags & OHCI_QUIRK_BE_DESC)
-#else
-#define big_endian_desc(ahcd)  1               /* only big endian */
-#endif
-#else
-#define big_endian_desc(ahcd)  0               /* only little endian */
-#endif
-
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
-#define big_endian_mmio(ahcd)  (ahcd->flags & OHCI_QUIRK_BE_MMIO)
-#else
-#define big_endian_mmio(ahcd)  1               /* only big endian */
-#endif
-#else
-#define big_endian_mmio(ahcd)  0               /* only little endian */
-#endif
-
-/*
- * Big-endian read/write functions are arch-specific.
- * Other arches can be added if/when they're needed.
- *
- */
-static inline unsigned int admhc_readl(const struct admhcd *ahcd,
-       __hc32 __iomem *regs)
-{
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-       return big_endian_mmio(ahcd) ?
-               readl_be(regs) :
-               readl(regs);
-#else
-       return readl(regs);
-#endif
-}
-
-static inline void admhc_writel(const struct admhcd *ahcd,
-       const unsigned int val, __hc32 __iomem *regs)
-{
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-       big_endian_mmio(ahcd) ?
-               writel_be(val, regs) :
-               writel(val, regs);
-#else
-               writel(val, regs);
-#endif
-}
-
-static inline void admhc_writel_flush(const struct admhcd *ahcd)
-{
-#if 0
-       /* TODO: remove? */
-       (void) admhc_readl(ahcd, &ahcd->regs->gencontrol);
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* cpu to ahcd */
-static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x)
-{
-       return big_endian_desc(ahcd) ?
-               (__force __hc16)cpu_to_be16(x) :
-               (__force __hc16)cpu_to_le16(x);
-}
-
-static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x)
-{
-       return big_endian_desc(ahcd) ?
-               cpu_to_be16p(x) :
-               cpu_to_le16p(x);
-}
-
-static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x)
-{
-       return big_endian_desc(ahcd) ?
-               (__force __hc32)cpu_to_be32(x) :
-               (__force __hc32)cpu_to_le32(x);
-}
-
-static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x)
-{
-       return big_endian_desc(ahcd) ?
-               cpu_to_be32p(x) :
-               cpu_to_le32p(x);
-}
-
-/* ahcd to cpu */
-static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x)
-{
-       return big_endian_desc(ahcd) ?
-               be16_to_cpu((__force __be16)x) :
-               le16_to_cpu((__force __le16)x);
-}
-
-static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x)
-{
-       return big_endian_desc(ahcd) ?
-               be16_to_cpup((__force __be16 *)x) :
-               le16_to_cpup((__force __le16 *)x);
-}
-
-static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x)
-{
-       return big_endian_desc(ahcd) ?
-               be32_to_cpu((__force __be32)x) :
-               le32_to_cpu((__force __le32)x);
-}
-
-static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x)
-{
-       return big_endian_desc(ahcd) ?
-               be32_to_cpup((__force __be32 *)x) :
-               le32_to_cpup((__force __le32 *)x);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline u16 admhc_frame_no(const struct admhcd *ahcd)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK;
-       return (u16)t;
-}
-
-static inline u16 admhc_frame_remain(const struct admhcd *ahcd)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT;
-       t &= ADMHC_SFN_FR_MASK;
-       return (u16)t;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline void admhc_disable(struct admhcd *ahcd)
-{
-       admhcd_to_hcd(ahcd)->state = HC_STATE_HALT;
-}
-
-#define        FI              0x2edf          /* 12000 bits per frame (-1) */
-#define        FSLDP(fi)       (0x7fff & ((6 * ((fi) - 1200)) / 7))
-#define        FIT             ADMHC_SFI_FIT
-#define LSTHRESH       0x628           /* lowspeed bit threshold */
-
-static inline void periodic_reinit(struct admhcd *ahcd)
-{
-#if 0
-       u32     fi = ahcd->fminterval & ADMHC_SFI_FI_MASK;
-       u32     fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
-
-       /* TODO: adjust FSLargestDataPacket value too? */
-       admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
-                                       &ahcd->regs->fminterval);
-#else
-       u32     fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
-
-       /* TODO: adjust FSLargestDataPacket value too? */
-       admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
-                                       &ahcd->regs->fminterval);
-#endif
-}
-
-static inline u32 admhc_read_rhdesc(struct admhcd *ahcd)
-{
-       return admhc_readl(ahcd, &ahcd->regs->rhdesc);
-}
-
-static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port)
-{
-       return admhc_readl(ahcd, &ahcd->regs->portstatus[port]);
-}
-
-static inline void admhc_write_portstatus(struct admhcd *ahcd, int port,
-               u32 value)
-{
-       admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]);
-}
-
-static inline void roothub_write_status(struct admhcd *ahcd, u32 value)
-{
-       /* FIXME: read-only bits must be masked out */
-       admhc_writel(ahcd, value, &ahcd->regs->rhdesc);
-}
-
-static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->int_enable);
-       t &= ~(ints);
-       admhc_writel(ahcd, t, &ahcd->regs->int_enable);
-       /* TODO: flush writes ?*/
-}
-
-static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->int_enable);
-       t |= ints;
-       admhc_writel(ahcd, t, &ahcd->regs->int_enable);
-       /* TODO: flush writes ?*/
-}
-
-static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints)
-{
-       admhc_writel(ahcd, ints, &ahcd->regs->int_status);
-}
-
-static inline void admhc_dma_enable(struct admhcd *ahcd)
-{
-       u32 t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->host_control);
-       if (t & ADMHC_HC_DMAE)
-               return;
-
-       t |= ADMHC_HC_DMAE;
-       admhc_writel(ahcd, t, &ahcd->regs->host_control);
-       admhc_vdbg(ahcd, "DMA enabled\n");
-}
-
-static inline void admhc_dma_disable(struct admhcd *ahcd)
-{
-       u32 t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->host_control);
-       if (!(t & ADMHC_HC_DMAE))
-               return;
-
-       t &= ~ADMHC_HC_DMAE;
-       admhc_writel(ahcd, t, &ahcd->regs->host_control);
-       admhc_vdbg(ahcd, "DMA disabled\n");
-}
diff --git a/target/linux/adm5120/files-3.14/drivers/watchdog/adm5120_wdt.c b/target/linux/adm5120/files-3.14/drivers/watchdog/adm5120_wdt.c
deleted file mode 100644 (file)
index d5d63b2..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- *     ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver
- *     Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2007
- *
- *     based on
- *
- *     RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver
- *
- *     This program is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     as published by the Free Software Foundation; either version
- *     2 of the License, or (at your option) any later version.
- *
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/irq.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define DEFAULT_TIMEOUT        15              /* (secs) Default is 15 seconds */
-#define MAX_TIMEOUT    327
-/* Max is 327 seconds, counter is 15-bit integer, step is 10 ms */
-
-#define NAME "adm5120_wdt"
-#define VERSION "0.1"
-
-static int expect_close;
-static int access;
-static unsigned int timeout = DEFAULT_TIMEOUT;
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_LICENSE("GPL");
-
-
-static inline void wdt_set_timeout(void)
-{
-       u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16);
-       SW_WRITE_REG(SWITCH_REG_WDOG0, val);
-}
-
-/*
-   It looks like WDOG0-register-write don't modify counter,
-   but WDOG0-register-read resets counter.
-*/
-
-static inline void wdt_reset_counter(void)
-{
-       SW_READ_REG(SWITCH_REG_WDOG0);
-}
-
-static inline void wdt_disable(void)
-{
-       SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000);
-}
-
-
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
-       /* Allow only one person to hold it open */
-       if (access)
-               return -EBUSY;
-
-       if (nowayout)
-               __module_get(THIS_MODULE);
-
-       /* Activate timer */
-       wdt_reset_counter();
-       wdt_set_timeout();
-       printk(KERN_INFO NAME ": enabling watchdog timer\n");
-       access = 1;
-       return 0;
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
-       /*
-        * Shut off the timer.
-        * Lock it in if it's a module and we set nowayout
-        */
-       if (expect_close && (nowayout == 0)) {
-               wdt_disable();
-               printk(KERN_INFO NAME ": disabling watchdog timer\n");
-               module_put(THIS_MODULE);
-       } else
-               printk(KERN_CRIT NAME ": device closed unexpectedly.  WDT will not stop!\n");
-
-       access = 0;
-       return 0;
-}
-
-static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-{
-       /* Refresh the timer. */
-       if (len) {
-               if (!nowayout) {
-                       size_t i;
-
-                       /* In case it was set long ago */
-                       expect_close = 0;
-
-                       for (i = 0; i != len; i++) {
-                               char c;
-                               if (get_user(c, data + i))
-                                       return -EFAULT;
-                               if (c == 'V')
-                                       expect_close = 1;
-                       }
-               }
-               wdt_reset_counter();
-               return len;
-       }
-       return 0;
-}
-
-static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-       int new_timeout;
-       static struct watchdog_info ident = {
-               .options =              WDIOF_SETTIMEOUT |
-                                       WDIOF_KEEPALIVEPING |
-                                       WDIOF_MAGICCLOSE,
-               .firmware_version =     0,
-               .identity =             "ADM5120_WDT Watchdog",
-       };
-       switch (cmd) {
-       default:
-               return -ENOTTY;
-       case WDIOC_GETSUPPORT:
-               if (copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
-                       return -EFAULT;
-               return 0;
-       case WDIOC_GETSTATUS:
-       case WDIOC_GETBOOTSTATUS:
-               return put_user(0, (int *)arg);
-       case WDIOC_KEEPALIVE:
-               wdt_reset_counter();
-               return 0;
-       case WDIOC_SETTIMEOUT:
-               if (get_user(new_timeout, (int *)arg))
-                       return -EFAULT;
-               if (new_timeout < 1)
-                       return -EINVAL;
-               if (new_timeout > MAX_TIMEOUT)
-                       return -EINVAL;
-               timeout = new_timeout;
-               wdt_set_timeout();
-               /* Fall */
-       case WDIOC_GETTIMEOUT:
-               return put_user(timeout, (int *)arg);
-       }
-}
-
-static const struct file_operations wdt_fops = {
-       .owner          = THIS_MODULE,
-       .llseek         = no_llseek,
-       .write          = wdt_write,
-       .unlocked_ioctl = wdt_ioctl,
-       .open           = wdt_open,
-       .release        = wdt_release,
-};
-
-static struct miscdevice wdt_miscdev = {
-       .minor          = WATCHDOG_MINOR,
-       .name           = "watchdog",
-       .fops           = &wdt_fops,
-};
-
-static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION "\n";
-
-static int __init watchdog_init(void)
-{
-       int ret;
-
-       ret = misc_register(&wdt_miscdev);
-
-       if (ret)
-               return ret;
-
-       wdt_disable();
-       printk(banner);
-
-       return 0;
-}
-
-static void __exit watchdog_exit(void)
-{
-       misc_deregister(&wdt_miscdev);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_exit);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files-3.8/arch/mips/adm5120/Kconfig
deleted file mode 100644 (file)
index be35a8f..0000000
+++ /dev/null
@@ -1,197 +0,0 @@
-if ADM5120
-
-menu "ADM5120 Board selection"
-
-config ADM5120_MACH_CAS_771
-       bool "Cellvision CAS-771/771W support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_CELLVISION
-       default y
-
-config ADM5120_MACH_NFS_101
-       bool "Cellvision NFS-101U/101WU support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_CELLVISION
-       default y
-
-config ADM5120_MACH_NP27G
-       bool "Compex NP27G support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_COMPEX
-       default y
-
-config ADM5120_MACH_NP28G
-       bool "Compex NP28G support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_COMPEX
-       default y
-
-config ADM5120_MACH_WP54
-       bool "Compex WP54 family support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_COMPEX
-       default y
-
-config ADM5120_MACH_EB_214A
-       bool "EB-214A support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_GENERIC
-       default y
-
-config ADM5120_MACH_BR_6104K
-       bool "Edimax BR-6104K support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_EDIMAX
-       default y
-
-config ADM5120_MACH_BR_6104KP
-       bool "Edimax BR-6104KP support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_EDIMAX
-       default y
-
-config ADM5120_MACH_BR_61X4WG
-       bool "Edimax BR-6104WG/6114WG support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_EDIMAX
-       default y
-
-config ADM5120_MACH_EASY5120_RT
-       bool "Infineon EASY 5120-RT Reference Board support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_INFINEON
-       default y
-
-config ADM5120_MACH_EASY5120_WVOIP
-       bool "Infineon EASY 5120-WVoIP Reference Board support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_INFINEON
-       default y
-
-config ADM5120_MACH_EASY5120P_ATA
-       bool "Infineon EASY 5120P-ATA Reference Board support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_INFINEON
-       default y
-
-config ADM5120_MACH_EASY83000
-       bool "Infineon EASY 83000 Reference Board support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_INFINEON
-       default y
-
-config ADM5120_MACH_RB_11X
-       bool "MikroTik RouterBOARD 111/112 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_133
-       bool "MikroTik RouterBOARD 133 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_133C
-       bool "MikroTik RouterBOARD 133C support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_150
-       bool "MikroTik RouterBOARD 150 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_153
-       bool "MikroTik RouterBOARD 153 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_RB_192
-       bool "MikroTik RouterBOARD 192 support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MIKROTIK
-       default y
-
-config ADM5120_MACH_PMUGW
-       bool "Motorola Powerline MU Gateway"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_MOTOROLA
-       default y
-
-config ADM5120_MACH_5GXI
-       bool "OSBRiDGE 5GXi/5XLi support"
-       depends on CPU_LITTLE_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_OSBRIDGE
-       default y
-
-config ADM5120_MACH_P_334WT
-       bool "ZyXEL Prestige 334WT"
-       depends on CPU_BIG_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_ZYXEL
-       default y
-
-config ADM5120_MACH_P_335
-       bool "ZyXEL Prestige 335/335WT"
-       depends on CPU_BIG_ENDIAN
-       select ADM5120_SOC_BGA
-       select ADM5120_OEM_ZYXEL
-       default y
-
-endmenu
-
-config ADM5120_SOC_BGA
-       select HW_HAS_PCI
-       def_bool n
-
-config ADM5120_OEM_CELLVISION
-       def_bool n
-
-config ADM5120_OEM_COMPEX
-       def_bool n
-
-config ADM5120_OEM_EDIMAX
-       def_bool n
-
-config ADM5120_OEM_GENERIC
-       def_bool n
-
-config ADM5120_OEM_INFINEON
-       def_bool n
-
-config ADM5120_OEM_MIKROTIK
-       def_bool n
-
-config ADM5120_OEM_MOTOROLA
-       def_bool n
-
-config ADM5120_OEM_OSBRIDGE
-       def_bool n
-
-config ADM5120_OEM_ZYXEL
-       def_bool n
-
-config ARM_AMBA
-       def_bool y
-
-endif
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/Platform b/target/linux/adm5120/files-3.8/arch/mips/adm5120/Platform
deleted file mode 100644 (file)
index 0c9edf2..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Infineon/ADMtek ADM5120
-#
-
-platform-$(CONFIG_ADM5120)                     += adm5120/common/
-
-platform-$(CONFIG_ADM5120_OEM_CELLVISION)      += adm5120/cellvision/
-platform-$(CONFIG_ADM5120_OEM_COMPEX)          += adm5120/compex/
-platform-$(CONFIG_ADM5120_OEM_EDIMAX)          += adm5120/edimax/
-platform-$(CONFIG_ADM5120_OEM_GENERIC)         += adm5120/generic/
-platform-$(CONFIG_ADM5120_OEM_INFINEON)                += adm5120/infineon/
-platform-$(CONFIG_ADM5120_OEM_MIKROTIK)                += adm5120/mikrotik/
-platform-$(CONFIG_ADM5120_OEM_MOTOROLA)                += adm5120/motorola/
-platform-$(CONFIG_ADM5120_OEM_OSBRIDGE)                += adm5120/osbridge/
-platform-$(CONFIG_ADM5120_OEM_ZYXEL)           += adm5120/zyxel/
-
-cflags-$(CONFIG_ADM5120)                       += -I$(srctree)/arch/mips/include/asm/mach-adm5120
-libs-$(CONFIG_ADM5120)                         += arch/mips/adm5120/prom/
-load-$(CONFIG_ADM5120)                         += 0xffffffff80001000
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/Makefile
deleted file mode 100644 (file)
index a949fc9..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-y  += cellvision.o
-
-obj-$(CONFIG_ADM5120_MACH_CAS_771)     += cas-771.o
-obj-$(CONFIG_ADM5120_MACH_NFS_101)     += nfs-101.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cas-771.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cas-771.c
deleted file mode 100644 (file)
index 5033e02..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  Cellvision/SparkLAN CAS-771/771W support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct gpio_led cas771_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash",    NULL),
-       /* GPIO PIN3 is the reset */
-       GPIO_LED_STD(ADM5120_GPIO_PIN6, "access",       NULL),
-       GPIO_LED_STD(ADM5120_GPIO_P0L1, "status",       NULL),
-       GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag",         NULL),
-};
-
-static void __init cas771_setup(void)
-{
-       cas7xx_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds),
-                                       cas771_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS771, "CAS-771", "Cellvision CAS-771/771W",
-            cas771_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.c
deleted file mode 100644 (file)
index a7cedf0..0000000
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  Cellvision/SparkLAN boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-#include <prom/admboot.h>
-
-#define CELLVISION_GPIO_FLASH_A20      ADM5120_GPIO_PIN5
-#define CELLVISION_GPIO_DEV_MASK       (1 << CELLVISION_GPIO_FLASH_A20)
-
-#define CELLVISION_CONFIG_OFFSET       0x8000
-#define CELLVISION_CONFIG_SIZE         0x1000
-
-static struct mtd_partition cas6xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "nvfs1",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "nvfs2",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct mtd_partition cas7xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "nvfs",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 128*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(CELLVISION_GPIO_FLASH_A20, 0);
-               break;
-       case 1:
-               gpio_set_value(CELLVISION_GPIO_FLASH_A20, 1);
-               break;
-       }
-}
-
-static void __init cellvision_flash_setup(void)
-{
-       /* setup flash A20 line */
-       gpio_request(CELLVISION_GPIO_FLASH_A20, NULL);
-       gpio_direction_output(CELLVISION_GPIO_FLASH_A20, 0);
-
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_add_device_flash(0);
-}
-
-void __init cellvision_mac_setup(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(CELLVISION_CONFIG_OFFSET,
-                                  CELLVISION_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-void __init cas6xx_flash_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
-       adm5120_flash0_data.parts = cas6xx_partitions;
-
-       cellvision_flash_setup();
-}
-
-void __init cas7xx_flash_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
-       adm5120_flash0_data.parts = cas7xx_partitions;
-
-       cellvision_flash_setup();
-}
-
-void __init cas6xx_setup(void)
-{
-       cas6xx_flash_setup();
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-       adm5120_add_device_switch(1, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS630, "CAS-630", "Cellvision CAS-630/630W",
-            cas6xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS670, "CAS-670", "Cellvision CAS-670/670W",
-            cas6xx_setup);
-
-void __init cas7xx_setup(void)
-{
-       cas7xx_flash_setup();
-       cellvision_mac_setup();
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-       adm5120_add_device_switch(1, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS700, "CAS-700", "Cellvision CAS-700/700W",
-            cas7xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS790, "CAS-790", "Cellvision CAS-790",
-            cas7xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS861, "CAS-861", "Cellvision CAS-861/861W",
-            cas7xx_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/cellvision.h
deleted file mode 100644 (file)
index 2b55ebf..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  Cellvision/SparkLAN boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void cellvision_mac_setup(void) __init;
-
-extern void cas6xx_flash_setup(void) __init;
-extern void cas7xx_flash_setup(void) __init;
-extern void cas6xx_setup(void) __init;
-extern void cas7xx_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/nfs-101.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/cellvision/nfs-101.c
deleted file mode 100644 (file)
index 7d214c0..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  Cellvision/SparkLAN NFS-101U/WU support
- *
- *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-static struct adm5120_pci_irq nfs101_pci_irqs[] __initdata = {
-       /* miniPCI slot */
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-
-       /* ALi USB controller */
-       PCIIRQ(3, 0, 2, ADM5120_IRQ_PCI2),
-       PCIIRQ(3, 3, 1, ADM5120_IRQ_PCI1),
-
-       /* NEC USB controller */
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI2),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2),
-};
-
-static u8 nfs101_vlans[6] __initdata = {
-       /* FIXME: not tested */
-       0x5f, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init nfs101_setup(void)
-{
-       cas6xx_flash_setup();
-       cellvision_mac_setup();
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-       adm5120_add_device_switch(1, nfs101_vlans);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(nfs101_pci_irqs),
-                               nfs101_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_NFS101U, "NFS-101U", "Cellvision NFS-101U/101WU",
-            nfs101_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/Makefile
deleted file mode 100644 (file)
index 8d302c5..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Infineon/ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-obj-y  := adm5120.o setup.o prom.o irq.o memory.o clock.o \
-          gpio.o platform.o
-
-obj-$(CONFIG_EARLY_PRINTK)     += early-printk.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/adm5120.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/adm5120.c
deleted file mode 100644 (file)
index 2838834..0000000
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-unsigned int adm5120_product_code;
-unsigned int adm5120_revision;
-unsigned int adm5120_package;
-unsigned int adm5120_nand_boot;
-unsigned long adm5120_speed;
-
-/*
- * CPU settings detection
- */
-#define CODE_GET_PC(c)         ((c) & CODE_PC_MASK)
-#define CODE_GET_REV(c)                (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
-#define CODE_GET_PK(c)         (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
-#define CODE_GET_CLKS(c)       (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
-#define CODE_GET_NAB(c)                (((c) & CODE_NAB) != 0)
-
-void adm5120_ndelay(u32 ns)
-{
-       u32     t;
-
-       SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
-       SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-
-       t = (ns+640) / 640;
-       t &= TIMER_PERIOD_MASK;
-       SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE);
-
-       /* wait until the timer expires */
-       do {
-               t = SW_READ_REG(SWITCH_REG_TIMER_INT);
-       } while ((t & TIMER_INT_TOS) == 0);
-
-       /* leave the timer disabled */
-       SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
-       SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-}
-
-void __init adm5120_soc_init(void)
-{
-       u32 code;
-       u32 clks;
-
-       code = SW_READ_REG(SWITCH_REG_CODE);
-
-       adm5120_product_code = CODE_GET_PC(code);
-       adm5120_revision = CODE_GET_REV(code);
-       adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
-               ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
-       adm5120_nand_boot = CODE_GET_NAB(code);
-
-       clks = CODE_GET_CLKS(code);
-       adm5120_speed = ADM5120_SPEED_175;
-       if (clks & 1)
-               adm5120_speed += 25000000;
-       if (clks & 2)
-               adm5120_speed += 50000000;
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/clock.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/clock.c
deleted file mode 100644 (file)
index 52ae64c..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  ADM5120 minimal CLK API implementation
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was based on the CLK API implementation in:
- *     arch/mips/tx4938/toshiba_rbtx4938/setup.c
- *     Copyright (C) 2000-2001 Toshiba Corporation
- *     2003-2005 (c) MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-struct clk {
-       unsigned long rate;
-};
-
-static struct clk uart_clk = {
-       .rate = ADM5120_UART_CLOCK
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-       const char *name = dev_name(dev);
-
-       if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
-               return &uart_clk;
-
-       return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-       return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-       return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/early-printk.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/early-printk.c
deleted file mode 100644 (file)
index d900712..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  ADM5120 specific early printk support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_uart.h>
-
-#define UART_READ(r) \
-       __raw_readl((void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-#define UART_WRITE(r, v) \
-       __raw_writel((v), (void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-
-void __init prom_putchar(char ch)
-{
-       while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
-               ;
-       UART_WRITE(UART_REG_DATA, ch);
-       while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
-               ;
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/gpio.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/gpio.c
deleted file mode 100644 (file)
index e60ed7a..0000000
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- *  ADM5120 generic GPIO API support via GPIOLIB
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define GPIO_REG(r)    (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-struct gpio1_desc {
-       void __iomem    *reg;           /* register address */
-       u8              iv_shift;       /* shift amount for input bit */
-       u8              mode_shift;     /* shift amount for mode bits */
-};
-
-#define GPIO1_DESC(p, l) {                                             \
-               .reg = GPIO_REG(SWITCH_REG_PORT0_LED + ((p) * 4)),      \
-               .iv_shift = LED0_IV_SHIFT + (l),                        \
-               .mode_shift = (l) * 4                                   \
-       }
-
-static struct gpio1_desc gpio1_table[15] = {
-       GPIO1_DESC(0, 0), GPIO1_DESC(0, 1), GPIO1_DESC(0, 2),
-       GPIO1_DESC(1, 0), GPIO1_DESC(1, 1), GPIO1_DESC(1, 2),
-       GPIO1_DESC(2, 0), GPIO1_DESC(2, 1), GPIO1_DESC(2, 2),
-       GPIO1_DESC(3, 0), GPIO1_DESC(3, 1), GPIO1_DESC(3, 2),
-       GPIO1_DESC(4, 0), GPIO1_DESC(4, 1), GPIO1_DESC(4, 2)
-};
-
-static u32 gpio_conf2;
-
-int adm5120_gpio_to_irq(unsigned gpio)
-{
-       int ret;
-
-       switch (gpio) {
-       case ADM5120_GPIO_PIN2:
-               ret = ADM5120_IRQ_GPIO2;
-               break;
-       case ADM5120_GPIO_PIN4:
-               ret = ADM5120_IRQ_GPIO4;
-               break;
-       default:
-               ret = -EINVAL;
-               break;
-       }
-
-       return ret;
-}
-EXPORT_SYMBOL(adm5120_gpio_to_irq);
-
-int adm5120_irq_to_gpio(unsigned irq)
-{
-       int ret;
-
-       switch (irq) {
-       case ADM5120_IRQ_GPIO2:
-               ret = ADM5120_GPIO_PIN2;
-               break;
-       case ADM5120_IRQ_GPIO4:
-               ret = ADM5120_GPIO_PIN4;
-               break;
-       default:
-               ret = -EINVAL;
-               break;
-       }
-
-       return ret;
-}
-EXPORT_SYMBOL(adm5120_irq_to_gpio);
-
-/*
- * Helpers for GPIO lines in GPIO_CONF0 register
- */
-#define PIN_IM(p)      ((1 << GPIO_CONF0_IM_SHIFT) << p)
-#define PIN_IV(p)      ((1 << GPIO_CONF0_IV_SHIFT) << p)
-#define PIN_OE(p)      ((1 << GPIO_CONF0_OE_SHIFT) << p)
-#define PIN_OV(p)      ((1 << GPIO_CONF0_OV_SHIFT) << p)
-
-int __adm5120_gpio0_get_value(unsigned offset)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = __raw_readl(reg);
-       if ((t & PIN_IM(offset)) != 0)
-               t &= PIN_IV(offset);
-       else
-               t &= PIN_OV(offset);
-
-       return (t) ? 1 : 0;
-}
-EXPORT_SYMBOL(__adm5120_gpio0_get_value);
-
-void __adm5120_gpio0_set_value(unsigned offset, int value)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = __raw_readl(reg);
-       if (value == 0)
-               t &= ~(PIN_OV(offset));
-       else
-               t |= PIN_OV(offset);
-
-       __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio0_set_value);
-
-static int adm5120_gpio0_get_value(struct gpio_chip *chip, unsigned offset)
-{
-       return __adm5120_gpio0_get_value(offset);
-}
-
-static void adm5120_gpio0_set_value(struct gpio_chip *chip,
-                                   unsigned offset, int value)
-{
-       __adm5120_gpio0_set_value(offset, value);
-}
-
-static int adm5120_gpio0_direction_input(struct gpio_chip *chip,
-                                        unsigned offset)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = __raw_readl(reg);
-       t &= ~(PIN_OE(offset));
-       t |= PIN_IM(offset);
-       __raw_writel(t, reg);
-
-       return 0;
-}
-
-static int adm5120_gpio0_direction_output(struct gpio_chip *chip,
-                                         unsigned offset, int value)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = __raw_readl(reg);
-       t &= ~(PIN_IM(offset) | PIN_OV(offset));
-       t |= PIN_OE(offset);
-
-       if (value)
-               t |= PIN_OV(offset);
-
-       __raw_writel(t, reg);
-
-       return 0;
-}
-
-static struct gpio_chip adm5120_gpio0_chip = {
-       .label                  = "adm5120 gpio0",
-       .get                    = adm5120_gpio0_get_value,
-       .set                    = adm5120_gpio0_set_value,
-       .direction_input        = adm5120_gpio0_direction_input,
-       .direction_output       = adm5120_gpio0_direction_output,
-       .base                   = ADM5120_GPIO_PIN0,
-       .ngpio                  = ADM5120_GPIO_PIN7 - ADM5120_GPIO_PIN0 + 1,
-};
-
-int __adm5120_gpio1_get_value(unsigned offset)
-{
-       void __iomem **reg;
-       u32 t, m;
-
-       reg = gpio1_table[offset].reg;
-
-       t = __raw_readl(reg);
-       m = (t >> gpio1_table[offset].mode_shift) & LED_MODE_MASK;
-       if (m == LED_MODE_INPUT)
-               return (t >> gpio1_table[offset].iv_shift) & 1;
-
-       if (m == LED_MODE_OUT_LOW)
-               return 0;
-
-       return 1;
-}
-EXPORT_SYMBOL(__adm5120_gpio1_get_value);
-
-void __adm5120_gpio1_set_value(unsigned offset, int value)
-{
-       void __iomem **reg;
-       u32 t, s;
-
-       reg = gpio1_table[offset].reg;
-       s = gpio1_table[offset].mode_shift;
-
-       t = __raw_readl(reg);
-       t &= ~(LED_MODE_MASK << s);
-
-       switch (value) {
-       case ADM5120_GPIO_LOW:
-               t |= (LED_MODE_OUT_LOW << s);
-               break;
-       case ADM5120_GPIO_FLASH:
-       case ADM5120_GPIO_LINK:
-       case ADM5120_GPIO_SPEED:
-       case ADM5120_GPIO_DUPLEX:
-       case ADM5120_GPIO_ACT:
-       case ADM5120_GPIO_COLL:
-       case ADM5120_GPIO_LINK_ACT:
-       case ADM5120_GPIO_DUPLEX_COLL:
-       case ADM5120_GPIO_10M_ACT:
-       case ADM5120_GPIO_100M_ACT:
-               t |= ((value & LED_MODE_MASK) << s);
-               break;
-       default:
-               t |= (LED_MODE_OUT_HIGH << s);
-               break;
-       }
-
-       __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio1_set_value);
-
-static int adm5120_gpio1_get_value(struct gpio_chip *chip, unsigned offset)
-{
-       return __adm5120_gpio1_get_value(offset);
-}
-
-static void adm5120_gpio1_set_value(struct gpio_chip *chip,
-                                   unsigned offset, int value)
-{
-       __adm5120_gpio1_set_value(offset, value);
-}
-
-static int adm5120_gpio1_direction_input(struct gpio_chip *chip,
-                                        unsigned offset)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = gpio1_table[offset].reg;
-       t = __raw_readl(reg);
-       t &= ~(LED_MODE_MASK << gpio1_table[offset].mode_shift);
-       __raw_writel(t, reg);
-
-       return 0;
-}
-
-static int adm5120_gpio1_direction_output(struct gpio_chip *chip,
-                                         unsigned offset, int value)
-{
-       __adm5120_gpio1_set_value(offset, value);
-       return 0;
-}
-
-static struct gpio_chip adm5120_gpio1_chip = {
-       .label                  = "adm5120 gpio1",
-       .get                    = adm5120_gpio1_get_value,
-       .set                    = adm5120_gpio1_set_value,
-       .direction_input        = adm5120_gpio1_direction_input,
-       .direction_output       = adm5120_gpio1_direction_output,
-       .base                   = ADM5120_GPIO_P0L0,
-       .ngpio                  = ADM5120_GPIO_P4L2 - ADM5120_GPIO_P0L0 + 1,
-};
-
-void __init adm5120_gpio_csx0_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_CSX0;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       gpio_request(ADM5120_GPIO_PIN1, "CSX0");
-}
-
-void __init adm5120_gpio_csx1_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_CSX1;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       gpio_request(ADM5120_GPIO_PIN3, "CSX1");
-}
-
-void __init adm5120_gpio_ew_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_EW;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       gpio_request(ADM5120_GPIO_PIN0, "EW");
-}
-
-void __init adm5120_gpio_init(void)
-{
-       int err;
-
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       if (adm5120_package_pqfp()) {
-               gpiochip_reserve(ADM5120_GPIO_PIN4, 4);
-               adm5120_gpio0_chip.ngpio = 4;
-       }
-
-       err = gpiochip_add(&adm5120_gpio0_chip);
-       if (err)
-               panic("cannot add ADM5120 GPIO0 chip, error=%d", err);
-
-       err = gpiochip_add(&adm5120_gpio1_chip);
-       if (err)
-               panic("cannot add ADM5120 GPIO1 chip, error=%d", err);
-
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/irq.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/irq.c
deleted file mode 100644 (file)
index a26e651..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- *  ADM5120 specific interrupt handlers
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-static void adm5120_intc_irq_unmask(struct irq_data *d);
-static void adm5120_intc_irq_mask(struct irq_data *d);
-static int  adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type);
-
-static inline void intc_write_reg(unsigned int reg, u32 val)
-{
-       void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
-       __raw_writel(val, base + reg);
-}
-
-static inline u32 intc_read_reg(unsigned int reg)
-{
-       void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
-       return __raw_readl(base + reg);
-}
-
-static struct irq_chip adm5120_intc_irq_chip = {
-       .name           = "INTC",
-       .irq_unmask     = adm5120_intc_irq_unmask,
-       .irq_mask       = adm5120_intc_irq_mask,
-       .irq_mask_ack   = adm5120_intc_irq_mask,
-       .irq_set_type   = adm5120_intc_irq_set_type
-};
-
-static struct irqaction adm5120_intc_irq_action = {
-       .handler        = no_action,
-       .name           = "cascade [INTC]"
-};
-
-static void adm5120_intc_irq_unmask(struct irq_data *d)
-{
-       intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE));
-}
-
-static void adm5120_intc_irq_mask(struct irq_data *d)
-{
-       intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE));
-}
-
-static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-       unsigned int irq = d->irq;
-       unsigned int sense;
-       unsigned long mode;
-       int err = 0;
-
-       sense = flow_type & (IRQ_TYPE_SENSE_MASK);
-       switch (sense) {
-       case IRQ_TYPE_NONE:
-       case IRQ_TYPE_LEVEL_HIGH:
-               break;
-       case IRQ_TYPE_LEVEL_LOW:
-               switch (irq) {
-               case ADM5120_IRQ_GPIO2:
-               case ADM5120_IRQ_GPIO4:
-                       break;
-               default:
-                       err = -EINVAL;
-                       break;
-               }
-               break;
-       default:
-               err = -EINVAL;
-               break;
-       }
-
-       if (err)
-               return err;
-
-       switch (irq) {
-       case ADM5120_IRQ_GPIO2:
-       case ADM5120_IRQ_GPIO4:
-               mode = intc_read_reg(INTC_REG_INT_MODE);
-               if (sense == IRQ_TYPE_LEVEL_LOW)
-                       mode |= (1 << (irq - ADM5120_INTC_IRQ_BASE));
-               else
-                       mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE));
-
-               intc_write_reg(INTC_REG_INT_MODE, mode);
-               break;
-       }
-
-       return 0;
-}
-
-static void adm5120_intc_irq_dispatch(void)
-{
-       unsigned long status;
-       int irq;
-
-       status = intc_read_reg(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
-       if (status) {
-               irq = ADM5120_INTC_IRQ_BASE + fls(status) - 1;
-               do_IRQ(irq);
-       } else
-               spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-       unsigned long pending;
-
-       pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-       if (pending & STATUSF_IP7)
-               do_IRQ(ADM5120_IRQ_COUNTER);
-       else if (pending & STATUSF_IP2)
-               adm5120_intc_irq_dispatch();
-       else
-               spurious_interrupt();
-}
-
-#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
-static void __init adm5120_intc_irq_init(void)
-{
-       int i;
-
-       /* disable all interrupts */
-       intc_write_reg(INTC_REG_IRQ_DISABLE, INTC_INT_ALL);
-
-       /* setup all interrupts to generate IRQ instead of FIQ */
-       intc_write_reg(INTC_REG_INT_MODE, 0);
-
-       /* set active level for all external interrupts to HIGH */
-       intc_write_reg(INTC_REG_INT_LEVEL, 0);
-
-       /* disable usage of the TEST_SOURCE register */
-       intc_write_reg(INTC_REG_IRQ_SOURCE_SELECT, 0);
-
-       for (i = ADM5120_INTC_IRQ_BASE;
-               i <= ADM5120_INTC_IRQ_BASE + INTC_IRQ_LAST;
-               i++) {
-               irq_set_chip_and_handler(i, &adm5120_intc_irq_chip,
-                       handle_level_irq);
-       }
-
-       setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
-}
-
-void __init arch_init_irq(void)
-{
-       mips_cpu_irq_init();
-       adm5120_intc_irq_init();
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/memory.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/memory.c
deleted file mode 100644 (file)
index d07266f..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_mpmc.h>
-
-#ifdef DEBUG
-#  define mem_dbg(f, a...)     printk(KERN_INFO "mem_detect: " f, ## a)
-#else
-#  define mem_dbg(f, a...)
-#endif
-
-unsigned long adm5120_memsize;
-
-#define MEM_READL(a)           __raw_readl((void __iomem *)(a))
-#define MEM_WRITEL(a, v)       __raw_writel((v), (void __iomem *)(a))
-
-static int __init mem_check_pattern(u8 *addr, unsigned long offs)
-{
-       u32 *p1 = (u32 *)addr;
-       u32 *p2 = (u32 *)(addr+offs);
-       u32 t, u, v;
-
-       /* save original value */
-       t = MEM_READL(p1);
-
-       u = MEM_READL(p2);
-       if (t != u)
-               return 0;
-
-       v = 0x55555555;
-       if (u == v)
-               v = 0xAAAAAAAA;
-
-       mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1);
-
-       MEM_WRITEL(p1, v);
-       adm5120_ndelay(1000);
-       u = MEM_READL(p2);
-
-       mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u);
-
-       /* restore original value */
-       MEM_WRITEL(p1, t);
-
-       return (v == u);
-}
-
-static void __init adm5120_detect_memsize(void)
-{
-       u32     memctrl;
-       u32     size, maxsize;
-       u8      *p;
-
-       memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL);
-       switch (memctrl & MEMCTRL_SDRS_MASK) {
-       case MEMCTRL_SDRS_4M:
-               maxsize = 4 << 20;
-               break;
-       case MEMCTRL_SDRS_8M:
-               maxsize = 8 << 20;
-               break;
-       case MEMCTRL_SDRS_16M:
-               maxsize = 16 << 20;
-               break;
-       default:
-               maxsize = 64 << 20;
-               break;
-       }
-
-       mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20);
-
-       /* detect size of the 1st SDRAM bank */
-       p = (u8 *)KSEG1ADDR(0);
-       for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
-               if (mem_check_pattern(p, size)) {
-                       /* mirrored address */
-                       mem_dbg("mirrored data found at offset 0x%08X\n", size);
-                       break;
-               }
-       }
-
-       mem_dbg("chip size in 1st bank is %uMB\n", size >> 20);
-       adm5120_memsize = size;
-
-       if (size != maxsize)
-               /* 2nd bank is not supported */
-               goto out;
-
-       if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
-               /* 2nd bank is disabled */
-               goto out;
-
-       /*
-        * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
-        * are missing.
-        */
-       mem_dbg("check presence of 2nd bank\n");
-
-       p = (u8 *)KSEG1ADDR(maxsize+size-4);
-       if (mem_check_pattern(p, 0))
-               adm5120_memsize += size;
-
-       if (maxsize != size) {
-               /* adjusting MECTRL register */
-               memctrl &= ~(MEMCTRL_SDRS_MASK);
-               switch (size>>20) {
-               case 4:
-                       memctrl |= MEMCTRL_SDRS_4M;
-                       break;
-               case 8:
-                       memctrl |= MEMCTRL_SDRS_8M;
-                       break;
-               case 16:
-                       memctrl |= MEMCTRL_SDRS_16M;
-                       break;
-               default:
-                       memctrl |= MEMCTRL_SDRS_64M;
-                       break;
-               }
-               SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl);
-       }
-
-out:
-       mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
-               size>>20);
-}
-
-void __init adm5120_mem_init(void)
-{
-       adm5120_detect_memsize();
-       add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/platform.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/platform.c
deleted file mode 100644 (file)
index bdbfbcb..0000000
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- *  ADM5120 generic platform devices
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_nand.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#if 1
-/*
- * TODO:remove global adm5120_eth* variables when the switch driver will be
- *     converted into a real platform driver
- */
-unsigned int adm5120_eth_num_ports = 6;
-EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
-
-unsigned char adm5120_eth_macs[6][6] = {
-       {'\00', 'A', 'D', 'M', '\x51', '\x20' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x21' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x22' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x23' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x24' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x25' }
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_macs);
-
-unsigned char adm5120_eth_vlans[6] = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x60
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
-#endif
-
-void __init adm5120_setup_eth_macs(u8 *mac_base)
-{
-       u32 t;
-       int i, j;
-
-       t = ((u32) mac_base[3] << 16) | ((u32) mac_base[4] << 8)
-               | ((u32) mac_base[5]);
-
-       for (i = 0; i < ARRAY_SIZE(adm5120_eth_macs); i++) {
-               for (j = 0; j < 3; j++)
-                       adm5120_eth_macs[i][j] = mac_base[j];
-
-               adm5120_eth_macs[i][3] = (t >> 16) & 0xff;
-               adm5120_eth_macs[i][4] = (t >> 8) & 0xff;
-               adm5120_eth_macs[i][5] = t & 0xff;
-
-               t++;
-       }
-}
-
-/*
- * Built-in ethernet switch
- */
-struct resource adm5120_switch_resources[] = {
-       [0] = {
-               .start  = ADM5120_SWITCH_BASE,
-               .end    = ADM5120_SWITCH_BASE+ADM5120_SWITCH_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = ADM5120_IRQ_SWITCH,
-               .end    = ADM5120_IRQ_SWITCH,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-struct adm5120_switch_platform_data adm5120_switch_data;
-struct platform_device adm5120_switch_device = {
-       .name           = "adm5120-switch",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(adm5120_switch_resources),
-       .resource       = adm5120_switch_resources,
-       .dev.platform_data = &adm5120_switch_data,
-};
-
-void __init adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map)
-{
-       if (num_ports > 0)
-               adm5120_eth_num_ports = num_ports;
-
-       if (vlan_map)
-               memcpy(adm5120_eth_vlans, vlan_map, sizeof(adm5120_eth_vlans));
-
-       platform_device_register(&adm5120_switch_device);
-}
-
-/*
- * USB Host Controller
- */
-struct resource adm5120_hcd_resources[] = {
-       [0] = {
-               .start  = ADM5120_USBC_BASE,
-               .end    = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = ADM5120_IRQ_USBC,
-               .end    = ADM5120_IRQ_USBC,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static u64 adm5120_hcd_dma_mask = DMA_BIT_MASK(24);
-struct platform_device adm5120_hcd_device = {
-       .name           = "adm5120-hcd",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(adm5120_hcd_resources),
-       .resource       = adm5120_hcd_resources,
-       .dev = {
-               .dma_mask               = &adm5120_hcd_dma_mask,
-               .coherent_dma_mask      = DMA_BIT_MASK(24),
-       }
-};
-
-void __init adm5120_add_device_usb(void)
-{
-       platform_device_register(&adm5120_hcd_device);
-}
-
-/*
- * NOR flash devices
- */
-struct adm5120_flash_platform_data adm5120_flash0_data;
-struct platform_device adm5120_flash0_device = {
-       .name                   = "adm5120-flash",
-       .id                     = 0,
-       .dev.platform_data      = &adm5120_flash0_data,
-};
-
-struct adm5120_flash_platform_data adm5120_flash1_data;
-struct platform_device adm5120_flash1_device = {
-       .name                   = "adm5120-flash",
-       .id                     = 1,
-       .dev.platform_data      = &adm5120_flash1_data,
-};
-
-void __init adm5120_add_device_flash(unsigned id)
-{
-       struct platform_device *pdev;
-
-       switch (id) {
-       case 0:
-               pdev = &adm5120_flash0_device;
-               break;
-       case 1:
-               pdev = &adm5120_flash1_device;
-               break;
-       default:
-               pdev = NULL;
-               break;
-       }
-
-       if (pdev)
-               platform_device_register(pdev);
-}
-
-/*
- * built-in UARTs
- */
-static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
-               unsigned int mctrl)
-{
-}
-
-struct amba_pl010_data adm5120_uart0_data = {
-       .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart0_device = {
-       .dev            = {
-               .init_name = "apb:uart0",
-               .platform_data = &adm5120_uart0_data,
-       },
-       .res            = {
-               .start  = ADM5120_UART0_BASE,
-               .end    = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       },
-       .irq            = { ADM5120_IRQ_UART0, 0 },
-       .periphid       = 0x0041010,
-};
-
-struct amba_pl010_data adm5120_uart1_data = {
-       .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart1_device = {
-       .dev            = {
-               .init_name = "apb:uart1",
-               .platform_data = &adm5120_uart1_data,
-       },
-       .res            = {
-               .start  = ADM5120_UART1_BASE,
-               .end    = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       },
-       .irq            = { ADM5120_IRQ_UART1, 0 },
-       .periphid       = 0x0041010,
-};
-
-void __init adm5120_add_device_uart(unsigned id)
-{
-       struct amba_device *dev;
-
-       switch (id) {
-       case 0:
-               dev = &adm5120_uart0_device;
-               break;
-       case 1:
-               dev = &adm5120_uart1_device;
-               break;
-       default:
-               dev = NULL;
-               break;
-       }
-
-       if (dev)
-               amba_device_register(dev, &iomem_resource);
-}
-
-/*
- * GPIO buttons
- */
-void __init adm5120_register_gpio_buttons(int id,
-                                         unsigned poll_interval,
-                                         unsigned nbuttons,
-                                         struct gpio_keys_button *buttons)
-{
-       struct platform_device *pdev;
-       struct gpio_keys_platform_data pdata;
-       struct gpio_keys_button *p;
-       int err;
-
-       p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
-       if (!p)
-               return;
-
-       pdev = platform_device_alloc("gpio-keys-polled", id);
-       if (!pdev)
-               goto err_free_buttons;
-
-       memset(&pdata, 0, sizeof(pdata));
-       pdata.poll_interval = poll_interval;
-       pdata.nbuttons = nbuttons;
-       pdata.buttons = p;
-
-       err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-       if (err)
-               goto err_put_pdev;
-
-       err = platform_device_add(pdev);
-       if (err)
-               goto err_put_pdev;
-
-       return;
-
-err_put_pdev:
-       platform_device_put(pdev);
-
-err_free_buttons:
-       kfree(p);
-}
-
-/*
- * GPIO LEDS
- */
-struct gpio_led_platform_data adm5120_gpio_leds_data;
-struct platform_device adm5120_gpio_leds_device = {
-       .name           = "leds-gpio",
-       .id             = -1,
-       .dev.platform_data = &adm5120_gpio_leds_data,
-};
-
-void __init adm5120_add_device_gpio_leds(unsigned num_leds,
-                                   struct gpio_led *leds)
-{
-       struct gpio_led *p;
-
-       p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
-       if (!p)
-               return;
-
-       memcpy(p, leds, num_leds * sizeof(*p));
-       adm5120_gpio_leds_data.num_leds = num_leds;
-       adm5120_gpio_leds_data.leds = p;
-
-       platform_device_register(&adm5120_gpio_leds_device);
-}
-
-/*
- * NAND flash
- */
-struct resource adm5120_nand_resources[] = {
-       [0] = {
-               .start  = ADM5120_NAND_BASE,
-               .end    = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-};
-
-static int adm5120_nand_ready(struct mtd_info *mtd)
-{
-       return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0);
-}
-
-static void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-                                       unsigned int ctrl)
-{
-       if (ctrl & NAND_CTRL_CHANGE) {
-               adm5120_nand_set_cle(ctrl & NAND_CLE);
-               adm5120_nand_set_ale(ctrl & NAND_ALE);
-               adm5120_nand_set_cen(ctrl & NAND_NCE);
-       }
-
-       if (cmd != NAND_CMD_NONE)
-               NAND_WRITE_REG(NAND_REG_DATA, cmd);
-}
-
-void __init adm5120_add_device_nand(struct platform_nand_data *pdata)
-{
-       struct platform_device *pdev;
-       int err;
-
-       pdev = platform_device_alloc("gen_nand", -1);
-       if (!pdev)
-               goto err_out;
-
-       err = platform_device_add_resources(pdev, adm5120_nand_resources,
-                                       ARRAY_SIZE(adm5120_nand_resources));
-       if (err)
-               goto err_put;
-
-       err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
-       if (err)
-               goto err_put;
-
-       pdata = pdev->dev.platform_data;
-       pdata->ctrl.dev_ready = adm5120_nand_ready;
-       pdata->ctrl.cmd_ctrl = adm5120_nand_cmd_ctrl;
-
-       err = platform_device_add(pdev);
-       if (err)
-               goto err_put;
-
-       return;
-
-err_put:
-       platform_device_put(pdev);
-err_out:
-       return;
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/prom.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/prom.c
deleted file mode 100644 (file)
index 5c52ea2..0000000
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- *  ADM5120 specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/cfe.h>
-#include <prom/generic.h>
-#include <prom/routerboot.h>
-#include <prom/myloader.h>
-#include <prom/zynos.h>
-
-unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC;
-
-struct board_desc {
-       unsigned long   mach_type;
-       char            *name;
-};
-
-#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
-static struct board_desc common_boards[] __initdata = {
-       /* Cellvision/SparkLAN boards */
-       DEFBOARD("CAS-630",     MACH_ADM5120_CAS630),
-       DEFBOARD("CAS-670",     MACH_ADM5120_CAS670),
-       DEFBOARD("CAS-700",     MACH_ADM5120_CAS700),
-       DEFBOARD("CAS-771",     MACH_ADM5120_CAS771),
-       DEFBOARD("CAS-790",     MACH_ADM5120_CAS790),
-       DEFBOARD("CAS-861",     MACH_ADM5120_CAS861),
-       DEFBOARD("NFS-101U",    MACH_ADM5120_NFS101U),
-       /* Compex boards */
-       DEFBOARD("WP54G-WRT",   MACH_ADM5120_WP54G_WRT),
-       /* Edimax boards */
-       DEFBOARD("BR-6104K",    MACH_ADM5120_BR6104K),
-       DEFBOARD("BR-6104KP",   MACH_ADM5120_BR6104KP),
-       DEFBOARD("BR-6104WG",   MACH_ADM5120_BR61X4WG),
-       DEFBOARD("BR-6114WG",   MACH_ADM5120_BR61X4WG),
-       /* Infineon boards */
-       DEFBOARD("EASY 5120P-ATA",      MACH_ADM5120_EASY5120PATA),
-       DEFBOARD("EASY 5120-RT",        MACH_ADM5120_EASY5120RT),
-       DEFBOARD("EASY 5120-WVoIP",     MACH_ADM5120_EASY5120WVOIP),
-       DEFBOARD("EASY 83000",          MACH_ADM5120_EASY83000),
-       /* Mikrotik RouterBOARDs */
-       DEFBOARD("111",         MACH_ADM5120_RB_11X),
-       DEFBOARD("112",         MACH_ADM5120_RB_11X),
-       DEFBOARD("133",         MACH_ADM5120_RB_133),
-       DEFBOARD("133C",        MACH_ADM5120_RB_133C),
-       DEFBOARD("133C3",       MACH_ADM5120_RB_133C),
-       DEFBOARD("150",         MACH_ADM5120_RB_153), /* it's intentional */
-       DEFBOARD("153",         MACH_ADM5120_RB_153),
-       DEFBOARD("192",         MACH_ADM5120_RB_192),
-       DEFBOARD("miniROUTER",  MACH_ADM5120_RB_150),
-       /* OSBRiDGE boards */
-       DEFBOARD("OSBRiDGE 5GXi",       MACH_ADM5120_5GXI),
-       /* Motorola boards */
-       DEFBOARD("Powerline MU Gateway", MACH_ADM5120_PMUGW),
-       /* Generic EB-214A */
-       DEFBOARD("ADM5120",     MACH_ADM5120_EB_214A),
-};
-
-static unsigned long __init find_machtype_byname(char *name)
-{
-       unsigned long ret;
-       int i;
-
-       ret = MACH_ADM5120_GENERIC;
-       if (name == NULL)
-               goto out;
-
-       if (*name == '\0')
-               goto out;
-
-       for (i = 0; i < ARRAY_SIZE(common_boards); i++) {
-               if (strcmp(common_boards[i].name, name) == 0) {
-                       ret = common_boards[i].mach_type;
-                       break;
-               }
-       }
-
-out:
-       return ret;
-}
-
-static unsigned long __init detect_machtype_routerboot(void)
-{
-       char *name;
-
-       name = routerboot_get_boardname();
-       return find_machtype_byname(name);
-}
-
-static unsigned long __init detect_machtype_generic(void)
-{
-       char *name;
-
-       name = generic_prom_getenv("board_name");
-       return find_machtype_byname(name);
-}
-
-unsigned long __init detect_machtype_cfe(void)
-{
-       char *name;
-
-       name = cfe_getenv("BOARD_NAME");
-       return find_machtype_byname(name);
-}
-
-static struct {
-       unsigned long   mach_type;
-       u16             vendor_id;
-       u16             board_id;
-} zynos_boards[] __initdata = {
-#define ZYNOS_BOARD(vi, bi, mt) \
-       {.vendor_id = (vi), .board_id = (bi), .mach_type = (mt)}
-
-#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
-#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
-#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
-       ZYXEL_BOARD(ZYNOS_BOARD_HS100,  MACH_ADM5120_HS100),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334U,  MACH_ADM5120_P334U),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334W,  MACH_ADM5120_P334W),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WT_ALT,     MACH_ADM5120_P334WT),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335,   MACH_ADM5120_P335),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335U,  MACH_ADM5120_P335U)
-};
-
-static unsigned long __init detect_machtype_bootbase(void)
-{
-       int i;
-
-       for (i = 0; i < ARRAY_SIZE(zynos_boards); i++) {
-               if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
-                       zynos_boards[i].board_id == bootbase_info.board_id) {
-                       return zynos_boards[i].mach_type;
-                       break;
-               }
-       }
-
-       printk(KERN_WARNING "Unknown ZyXEL model (%u)\n",
-                               bootbase_info.board_id);
-       return MACH_ADM5120_GENERIC;
-}
-
-static struct {
-       unsigned long   mach_type;
-       u16     vid;
-       u16     did;
-       u16     svid;
-       u16     sdid;
-} mylo_boards[]  __initdata = {
-#define MYLO_BOARD(v, d, sv, sd, mt) \
-       {.vid = (v), .did = (d), .svid = (sv), .sdid = (sd), .mach_type = (mt)}
-#define COMPEX_BOARD(d, mt) \
-       MYLO_BOARD(VENID_COMPEX, (d), VENID_COMPEX, (d), (mt))
-
-       COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
-       COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
-       COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
-       COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54),
-       COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
-       COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54),
-       COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WP54),
-       COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WP54),
-};
-
-static unsigned long __init detect_machtype_myloader(void)
-{
-       unsigned long ret;
-       int i;
-
-       ret = MACH_ADM5120_GENERIC;
-       for (i = 0; i < ARRAY_SIZE(mylo_boards); i++) {
-               if (mylo_boards[i].vid == myloader_info.vid &&
-                       mylo_boards[i].did == myloader_info.did &&
-                       mylo_boards[i].svid == myloader_info.svid &&
-                       mylo_boards[i].sdid == myloader_info.sdid) {
-                       ret = mylo_boards[i].mach_type;
-                       break;
-               }
-       }
-
-       return ret;
-}
-
-static void __init prom_detect_machtype(void)
-{
-       if (bootbase_present()) {
-               adm5120_prom_type = ADM5120_PROM_BOOTBASE;
-               mips_machtype = detect_machtype_bootbase();
-               return;
-       }
-
-       if (cfe_present()) {
-               adm5120_prom_type = ADM5120_PROM_CFE;
-               mips_machtype = detect_machtype_cfe();
-               return;
-       }
-
-       if (myloader_present()) {
-               adm5120_prom_type = ADM5120_PROM_MYLOADER;
-               mips_machtype = detect_machtype_myloader();
-               return;
-       }
-
-       if (routerboot_present()) {
-               adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
-               mips_machtype = detect_machtype_routerboot();
-               return;
-       }
-
-       if (generic_prom_present()) {
-               adm5120_prom_type = ADM5120_PROM_GENERIC;
-               mips_machtype = detect_machtype_generic();
-               return;
-       }
-
-       mips_machtype = MACH_ADM5120_GENERIC;
-}
-
-#ifdef CONFIG_IMAGE_CMDLINE_HACK
-extern char __image_cmdline[];
-
-static void __init prom_init_cmdline(void)
-{
-       char *cmd;
-
-       /* init command line, register a default kernel command line */
-       cmd = __image_cmdline;
-       if (strlen(cmd) > 0)
-               strlcpy(arcs_cmdline, cmd, sizeof(arcs_cmdline));
-
-}
-#else
-static inline void prom_init_cmdline(void) {}
-#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-
-void __init prom_init(void)
-{
-       prom_detect_machtype();
-       prom_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
-       /* We do not have to prom memory to free */
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/setup.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/common/setup.c
deleted file mode 100644 (file)
index c4be845..0000000
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- *  ADM5120 specific setup
- *
- *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices
- *     Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#define ADM5120_SYS_TYPE_LEN   64
-
-unsigned char adm5120_sys_type[ADM5120_SYS_TYPE_LEN];
-void (*adm5120_board_reset)(void);
-
-static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
-       [ADM5120_PROM_GENERIC]          = "Generic",
-       [ADM5120_PROM_CFE]              = "CFE",
-       [ADM5120_PROM_UBOOT]            = "U-Boot",
-       [ADM5120_PROM_MYLOADER]         = "MyLoader",
-       [ADM5120_PROM_ROUTERBOOT]       = "RouterBOOT",
-       [ADM5120_PROM_BOOTBASE]         = "Bootbase"
-};
-
-static void __init adm5120_report(void)
-{
-       printk(KERN_INFO "SoC      : %s\n", adm5120_sys_type);
-       printk(KERN_INFO "Bootdev  : %s flash\n",
-               adm5120_nand_boot ? "NAND" : "NOR");
-       printk(KERN_INFO "Prom     : %s\n", prom_names[adm5120_prom_type]);
-}
-
-const char *get_system_type(void)
-{
-       return adm5120_sys_type;
-}
-
-static void adm5120_restart(char *command)
-{
-       /* TODO: stop switch before reset */
-
-       if (adm5120_board_reset)
-               adm5120_board_reset();
-
-       SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
-}
-
-static void adm5120_halt(void)
-{
-       local_irq_disable();
-
-       while (1) {
-               if (cpu_wait)
-                       cpu_wait();
-       }
-}
-
-void __init plat_time_init(void)
-{
-       mips_hpt_frequency = adm5120_speed / 2;
-}
-
-void __init plat_mem_setup(void)
-{
-       adm5120_soc_init();
-       adm5120_mem_init();
-
-       sprintf(adm5120_sys_type, "ADM%04X%s rev %u, running at %lu.%03lu MHz",
-               adm5120_product_code,
-               adm5120_package_bga() ? "" : "P",
-               adm5120_revision,
-               (adm5120_speed / 1000000), (adm5120_speed / 1000) % 1000);
-
-       adm5120_report();
-
-       _machine_restart = adm5120_restart;
-       _machine_halt = adm5120_halt;
-       pm_power_off = adm5120_halt;
-
-       set_io_port_base(KSEG1);
-}
-
-static int __init adm5120_board_setup(void)
-{
-       adm5120_gpio_init();
-
-       mips_machine_setup();
-
-       return 0;
-}
-arch_initcall(adm5120_board_setup);
-
-static void __init adm5120_generic_board_setup(void)
-{
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-       adm5120_add_device_switch(6, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_GENERIC, "Generic", "Generic ADM5120 board",
-            adm5120_generic_board_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/Makefile
deleted file mode 100644 (file)
index 8c66c17..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y  += compex.o
-
-obj-$(CONFIG_ADM5120_MACH_NP27G)       += np27g.o
-obj-$(CONFIG_ADM5120_MACH_NP28G)       += np28g.o
-obj-$(CONFIG_ADM5120_MACH_WP54)                += wp54.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.c
deleted file mode 100644 (file)
index 814acfb..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  Compex boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-#include <asm/mach-adm5120/prom/myloader.h>
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-void __init compex_mac_setup(void)
-{
-       if (myloader_present()) {
-               int i;
-
-               for (i = 0; i < 6; i++) {
-                       if (is_valid_ether_addr(myloader_info.macs[i]))
-                               memcpy(adm5120_eth_macs[i],
-                                       myloader_info.macs[i], ETH_ALEN);
-                       else
-                               random_ether_addr(adm5120_eth_macs[i]);
-               }
-       } else {
-               u8 mac[ETH_ALEN];
-
-               random_ether_addr(mac);
-               adm5120_setup_eth_macs(mac);
-       }
-}
-
-void __init compex_generic_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       compex_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/compex.h
deleted file mode 100644 (file)
index 124e676..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Compex boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void compex_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np27g.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np27g.c
deleted file mode 100644 (file)
index 82da46d..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  Compex NP27G board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-static u8 np27g_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init np27g_setup(void)
-{
-       compex_generic_setup();
-       adm5120_add_device_switch(5, np27g_vlans);
-       adm5120_add_device_usb();
-
-       /* TODO: add PCI IRQ map */
-}
-
-MIPS_MACHINE(MACH_ADM5120_NP27G, "NP27G", "Compex NetPassage 27G", np27g_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np28g.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/np28g.c
deleted file mode 100644 (file)
index a541439..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  Compex NP28G board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct gpio_led np28g_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN3, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN6, "wan_cond",     NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN7, "wifi",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L2, "usb1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L2, "usb2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L2, "usb3",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L2, "usb4",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan",          NULL),
-};
-
-static u8 np28g_vlans[6] __initdata = {
-       0x50, 0x42, 0x44, 0x48, 0x00, 0x00
-};
-
-static void np28g_reset(void)
-{
-       gpio_set_value(ADM5120_GPIO_PIN4, 0);
-}
-
-static void __init np28g_setup(void)
-{
-       compex_generic_setup();
-
-       /* setup reset line */
-       gpio_request(ADM5120_GPIO_PIN4, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN4, 1);
-       adm5120_board_reset = np28g_reset;
-
-       adm5120_add_device_switch(4, np28g_vlans);
-       adm5120_add_device_usb();
-
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(np28g_gpio_leds),
-                                       np28g_gpio_leds);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(np28g_pci_irqs), np28g_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_NP28G, "NP28G", "Compex NetPassage 28G", np28g_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/wp54.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/compex/wp54.c
deleted file mode 100644 (file)
index 8aa35c5..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  Compex WP54 board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-#define WP54_KEYS_POLL_INTERVAL                20
-#define WP54_KEYS_DEBOUNCE_INTERVAL    (3 * WP54_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wp54g_wrt_partitions[] = {
-       {
-               .name   = "cfe",
-               .offset = 0,
-               .size   = 0x050000,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "trx",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 0x3A0000,
-       } , {
-               .name   = "nvram",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 0x010000,
-       }
-};
-
-static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_keys_button wp54_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset_button",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = WP54_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN4,
-       }
-};
-
-static struct gpio_led wp54_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN7, "wan",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL),
-};
-
-static u8 wp54_vlans[6] __initdata = {
-       0x41, 0x42, 0x00, 0x00, 0x00, 0x00
-};
-
-static void wp54_reset(void)
-{
-       gpio_set_value(ADM5120_GPIO_PIN3, 0);
-}
-
-static void __init wp54_setup(void)
-{
-       compex_generic_setup();
-
-       /* setup reset line */
-       gpio_request(ADM5120_GPIO_PIN3, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN3, 1);
-       adm5120_board_reset = wp54_reset;
-
-       adm5120_add_device_switch(2, wp54_vlans);
-       adm5120_register_gpio_buttons(-1, WP54_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(wp54_gpio_buttons),
-                                     wp54_gpio_buttons);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(wp54_gpio_leds),
-                                       wp54_gpio_leds);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(wp54_pci_irqs), wp54_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_WP54, "WP54", "Compex WP54 family", wp54_setup);
-
-static void __init wp54_wrt_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
-       adm5120_flash0_data.parts = wp54g_wrt_partitions;
-
-       wp54_setup();
-}
-
-MIPS_MACHINE(MACH_ADM5120_WP54G_WRT, "WP54G-WRT", "Compex WP54G-WRT",
-            wp54_wrt_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/Makefile
deleted file mode 100644 (file)
index 1286ed4..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y  := br-61xx.o
-
-obj-$(CONFIG_ADM5120_MACH_BR_6104K)    += br-6104k.o
-obj-$(CONFIG_ADM5120_MACH_BR_6104KP)   += br-6104kp.o
-obj-$(CONFIG_ADM5120_MACH_BR_61X4WG)   += br-61x4wg.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104k.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104k.c
deleted file mode 100644 (file)
index 8b2b445..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Edimax BR-6104K board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct gpio_led br6104k_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",  NULL),
-};
-
-static void __init br6104k_setup(void)
-{
-       br61xx_generic_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104k_gpio_leds),
-                                       br6104k_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR6104K, "BR-6104K", "Edimax BR-6104K",
-            br6104k_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104kp.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-6104kp.c
deleted file mode 100644 (file)
index 034575d..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Edimax BR-6104KP board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct gpio_led br6104kp_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN3, "usb1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_PIN1, "usb2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",  NULL),
-};
-
-static void __init br6104kp_setup(void)
-{
-       br61xx_generic_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104kp_gpio_leds),
-                                       br6104kp_gpio_leds);
-       adm5120_add_device_usb();
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR6104KP, "BR-6104KP", "Edimax BR-6104KP",
-            br6104kp_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61x4wg.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61x4wg.c
deleted file mode 100644 (file)
index 5d57507..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  Edimax BR-6104Wg/6114WG board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct adm5120_pci_irq br61x4wg_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_led br61x4wg_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "power",        NULL),
-       GPIO_LED_STD(ADM5120_GPIO_PIN5, "wlan",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",  NULL),
-};
-
-static void __init br61x4wg_setup(void)
-{
-       br61xx_generic_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(br61x4wg_gpio_leds),
-                                       br61x4wg_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(br61x4wg_pci_irqs),
-                                       br61x4wg_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR61X4WG, "BR-6104WG", "Edimax BR-6104WG/6114WG",
-            br61x4wg_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.c
deleted file mode 100644 (file)
index 62a1cee..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  Edimax BR-61xx support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-#include <prom/admboot.h>
-
-#define BR61XX_CONFIG_OFFSET   0x8000
-#define BR61XX_CONFIG_SIZE             0x1000
-
-#define BR61XX_KEYS_POLL_INTERVAL      20
-#define BR61XX_KEYS_DEBOUNCE_INTERVAL  (3 * BR61XX_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition br61xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct gpio_keys_button br61xx_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset_button",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = BR61XX_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN2,
-       }
-};
-
-static u8 br61xx_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init br61xx_mac_setup(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(BR61XX_CONFIG_OFFSET,
-                                  BR61XX_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-void __init br61xx_generic_setup(void)
-{
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
-       adm5120_flash0_data.parts = br61xx_partitions;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_switch(5, br61xx_vlans);
-
-       adm5120_register_gpio_buttons(-1, BR61XX_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(br61xx_gpio_buttons),
-                                     br61xx_gpio_buttons);
-
-       br61xx_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/edimax/br-61xx.h
deleted file mode 100644 (file)
index c4a9ece..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Edimax BR-61xx board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void __init br61xx_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/Makefile
deleted file mode 100644 (file)
index 0c032e3..0000000
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_EB_214A)     += eb-214a.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/eb-214a.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/generic/eb-214a.c
deleted file mode 100644 (file)
index cf491a1..0000000
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  EB-214A board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2010 Cezary Jackiewicz <cezary@eko.one.pl>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-
-#define EB214A_CONFIG_OFFSET   0x4000
-
-#define EB214A_KEYS_POLL_INTERVAL      20
-#define EB214A_KEYS_DEBOUNCE_INTERVAL  (3 * EB214A_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition eb214a_partitions[] = {
-       {
-               .name   = "bootloader",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct adm5120_pci_irq eb214a_pci_irqs[] __initdata = {
-       PCIIRQ(4, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(4, 1, 2, ADM5120_IRQ_PCI0),
-       PCIIRQ(4, 2, 3, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_led eb214a_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN7, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan",          NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "usb1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "usb2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L2, "usb3",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "usb4",         NULL),
-};
-
-static struct gpio_keys_button eb214a_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = EB214A_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN1,
-       }
-};
-
-static u8 eb214a_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init eb214a_mac_setup(void)
-{
-       u8 mac_base[6];
-       u8 *cfg;
-       int i;
-
-       cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + EB214A_CONFIG_OFFSET);
-       for (i = 0; i < 6; i++)
-               mac_base[i] = cfg[i];
-
-       if (!is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-static void __init eb214a_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions);
-       adm5120_flash0_data.parts = eb214a_partitions;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       /* adm5120_add_device_uart(1); */
-
-       adm5120_add_device_switch(5, eb214a_vlans);
-
-       eb214a_mac_setup();
-
-       adm5120_register_gpio_buttons(-1, EB214A_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(eb214a_gpio_buttons),
-                                     eb214a_gpio_buttons);
-
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(eb214a_gpio_leds),
-                                       eb214a_gpio_leds);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(eb214a_pci_irqs),
-                                       eb214a_pci_irqs);
-       /* adm5120_add_device_usb(); */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EB_214A, "EB-214A", "Generic EB-214A", eb214a_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/Makefile
deleted file mode 100644 (file)
index 49453cb..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-obj-y  += infineon.o
-
-obj-$(CONFIG_ADM5120_MACH_EASY5120_RT)         += easy5120-rt.o
-obj-$(CONFIG_ADM5120_MACH_EASY5120_WVOIP)      += easy5120-wvoip.o
-obj-$(CONFIG_ADM5120_MACH_EASY5120P_ATA)       += easy5120p-ata.o
-obj-$(CONFIG_ADM5120_MACH_EASY83000)           += easy83000.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-rt.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-rt.c
deleted file mode 100644 (file)
index 31eaee7..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  Infineon EASY 5120-RT Reference Board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static struct gpio_led easy5120_rt_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN6, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan0_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan0_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan",          NULL),
-};
-
-static struct adm5120_pci_irq easy5120_rt_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 easy5120_rt_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init easy5120_rt_setup(void)
-{
-       easy_setup_bga();
-
-       adm5120_add_device_switch(5, easy5120_rt_vlans);
-       adm5120_add_device_usb();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(easy5120_rt_gpio_leds),
-                                       easy5120_rt_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(easy5120_rt_pci_irqs),
-                               easy5120_rt_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120RT, "EASY5120-RT",
-            "Infineon EASY 5120-RT Reference Board", easy5120_rt_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-wvoip.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120-wvoip.c
deleted file mode 100644 (file)
index 0bf404c..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  Infineon EASY 5120-WVoIP Reference Board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy5120wvoip_setup(void)
-{
-       easy_setup_bga();
-       adm5120_add_device_switch(6, NULL);
-
-       /* TODO: add VINETIC2 device */
-       /* TODO: setup PCI IRQ map */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120WVOIP, "EASY5120WVoIP",
-            "Infineon EASY 5120-WVoIP Reference Board", easy5120wvoip_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120p-ata.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy5120p-ata.c
deleted file mode 100644 (file)
index fafe023..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Infineon EASY 5120P-ATA Reference Board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy5120pata_setup(void)
-{
-       easy_setup_pqfp();
-
-       adm5120_add_device_switch(6, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120PATA, "EASY5120P-ATA",
-            "Infineon EASY 5120P-ATA Reference Board", easy5120pata_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy83000.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/easy83000.c
deleted file mode 100644 (file)
index 051b852..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Infineon EASY 83000 Reference Board support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy83000_setup(void)
-{
-       easy_setup_pqfp();
-       adm5120_add_device_switch(6, NULL);
-
-       /* TODO: add VINAX device */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY83000, "EASY8300",
-            "Infineon EASY 83000 Reference Board", easy83000_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.c
deleted file mode 100644 (file)
index 5c441da..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  Infineon Reference Boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-#include <prom/admboot.h>
-
-#define EASY_CONFIG_OFFSET     0x10000
-#define EASY_CONFIG_SIZE       0x1000
-
-static struct mtd_partition easy_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "boardcfg",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static __init void easy_setup_mac(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(EASY_CONFIG_OFFSET,
-                                  EASY_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-static void switch_bank_gpio3(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN3, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN3, 1);
-               break;
-       }
-}
-
-void __init easy_setup_pqfp(void)
-{
-       /* setup flash A20 line */
-       gpio_request(ADM5120_GPIO_PIN3, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN3, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-       adm5120_flash0_data.parts = easy_partitions;
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-
-       easy_setup_mac();
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-void __init easy_setup_bga(void)
-{
-       /* setup flash A20 line */
-       gpio_request(ADM5120_GPIO_PIN5, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-       adm5120_flash0_data.parts = easy_partitions;
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-
-       easy_setup_mac();
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/infineon/infineon.h
deleted file mode 100644 (file)
index a5f28b4..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Infineon Reference Boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-extern void easy_setup_pqfp(void) __init;
-extern void easy_setup_bga(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/Makefile
deleted file mode 100644 (file)
index 34ea0a3..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-obj-y  += rb-1xx.o
-
-obj-${CONFIG_ADM5120_MACH_RB_11X}      += rb-11x.o
-obj-${CONFIG_ADM5120_MACH_RB_133}      += rb-133.o
-obj-${CONFIG_ADM5120_MACH_RB_133C}     += rb-133c.o
-obj-${CONFIG_ADM5120_MACH_RB_150}      += rb-150.o
-obj-${CONFIG_ADM5120_MACH_RB_153}      += rb-153.o
-obj-${CONFIG_ADM5120_MACH_RB_192}      += rb-192.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-11x.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-11x.c
deleted file mode 100644 (file)
index fd768d8..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 111/112 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb11x_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN3, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan_speed",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact",   NULL),
-};
-
-static u8 rb11x_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb11x_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-
-       adm5120_add_device_switch(1, rb11x_vlans);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb11x_gpio_leds),
-                                       rb11x_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_11X, "11x", "Mikrotik RouterBOARD 111/112",
-            rb11x_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133.c
deleted file mode 100644 (file)
index 23c5782..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 133 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb133_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN6, "power",        NULL),
-       GPIO_LED_STD(ADM5120_GPIO_PIN5, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan3_lnkact",  NULL),
-};
-
-static u8 rb133_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb133_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-
-       adm5120_add_device_switch(3, rb133_vlans);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133_gpio_leds),
-                                       rb133_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_133, "133", "Mikrotik RouterBOARD 133",
-            rb133_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133c.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-133c.c
deleted file mode 100644 (file)
index 25bab70..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 133C support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb133c_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN6, "power",        NULL),
-       GPIO_LED_STD(ADM5120_GPIO_PIN5, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact",  NULL),
-};
-
-static u8 rb133c_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb133c_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-
-       adm5120_add_device_switch(1, rb133c_vlans);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133c_gpio_leds),
-                                       rb133c_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_133C, "133C", "Mikrotik RouterBOARD 133C",
-            rb133c_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-150.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-150.c
deleted file mode 100644 (file)
index 96a8c1b..0000000
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 150 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-#define RB150_NAND_BASE                0x1FC80000
-#define RB150_NAND_SIZE                1
-
-#define RB150_GPIO_NAND_READY  ADM5120_GPIO_PIN0
-#define RB150_GPIO_NAND_NCE    ADM5120_GPIO_PIN1
-#define RB150_GPIO_NAND_CLE    ADM5120_GPIO_P2L2
-#define RB150_GPIO_NAND_ALE    ADM5120_GPIO_P3L2
-#define RB150_GPIO_RESET_BUTTON        ADM5120_GPIO_PIN1 /* FIXME */
-
-#define RB150_NAND_DELAY       100
-
-#define RB150_NAND_WRITE(v) \
-       writeb((v), (void __iomem *)KSEG1ADDR(RB150_NAND_BASE))
-
-static struct resource rb150_nand_resources[] __initdata = {
-       [0] = {
-               .start  = RB150_NAND_BASE,
-               .end    = RB150_NAND_BASE + RB150_NAND_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-};
-
-static struct gpio_led rb150_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_P0L2, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led2",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_led1",    NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_led2",    NULL),
-};
-
-static u8 rb150_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static int rb150_nand_dev_ready(struct mtd_info *mtd)
-{
-       return gpio_get_value(RB150_GPIO_NAND_READY);
-}
-
-static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-               unsigned int ctrl)
-{
-       if (ctrl & NAND_CTRL_CHANGE) {
-               gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0);
-               gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0);
-               gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1);
-       }
-
-       udelay(RB150_NAND_DELAY);
-
-       if (cmd != NAND_CMD_NONE)
-               RB150_NAND_WRITE(cmd);
-}
-
-static void __init rb150_add_device_nand(void)
-{
-       struct platform_device *pdev;
-       int err;
-
-       /* setup GPIO pins for NAND flash chip */
-       gpio_request(RB150_GPIO_NAND_READY, "nand-ready");
-       gpio_direction_input(RB150_GPIO_NAND_READY);
-       gpio_request(RB150_GPIO_NAND_NCE, "nand-nce");
-       gpio_direction_output(RB150_GPIO_NAND_NCE, 1);
-       gpio_request(RB150_GPIO_NAND_CLE, "nand-cle");
-       gpio_direction_output(RB150_GPIO_NAND_CLE, 0);
-       gpio_request(RB150_GPIO_NAND_ALE, "nand-ale");
-       gpio_direction_output(RB150_GPIO_NAND_ALE, 0);
-
-       pdev = platform_device_alloc("gen_nand", -1);
-       if (!pdev)
-               goto err_out;
-
-       err = platform_device_add_resources(pdev, rb150_nand_resources,
-                                       ARRAY_SIZE(rb150_nand_resources));
-       if (err)
-               goto err_put;
-
-
-       rb1xx_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl;
-       rb1xx_nand_data.ctrl.dev_ready = rb150_nand_dev_ready;
-
-       err = platform_device_add_data(pdev, &rb1xx_nand_data,
-                                       sizeof(rb1xx_nand_data));
-       if (err)
-               goto err_put;
-
-       err = platform_device_add(pdev);
-       if (err)
-               goto err_put;
-
-       return;
-
-err_put:
-       platform_device_put(pdev);
-err_out:
-       return;
-}
-
-static void __init rb150_setup(void)
-{
-       rb1xx_gpio_buttons[0].gpio = RB150_GPIO_RESET_BUTTON;
-       rb1xx_generic_setup();
-       rb150_add_device_nand();
-
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb150_gpio_leds),
-                                       rb150_gpio_leds);
-       adm5120_add_device_switch(5, rb150_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_150, "miniROUTER", "Mikrotik RouterBOARD 150",
-            rb150_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-153.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-153.c
deleted file mode 100644 (file)
index 8456684..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 153 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct resource rb153_cf_resources[] __initdata = {
-       {
-               .name   = "cf_membase",
-               .start  = ADM5120_EXTIO1_BASE,
-               .end    = ADM5120_EXTIO1_BASE + ADM5120_EXTIO1_SIZE-1 ,
-               .flags  = IORESOURCE_MEM
-       }, {
-               .name   = "cf_irq",
-               .start  = ADM5120_IRQ_GPIO4,
-               .end    = ADM5120_IRQ_GPIO4,
-               .flags  = IORESOURCE_IRQ
-       }
-};
-
-static struct gpio_led rb153_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN5, "user",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",  NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_speed",   NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact",  NULL),
-};
-
-static u8 rb153_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb153_add_device_cf(void)
-{
-       /* enable CSX1:INTX1 on GPIO[3:4] for the CF slot */
-       adm5120_gpio_csx1_enable();
-
-       /* enable the wait state pin GPIO[0] for external I/O control */
-       adm5120_gpio_ew_enable();
-
-       platform_device_register_simple("pata-rb153-cf", -1,
-                       rb153_cf_resources, ARRAY_SIZE(rb153_cf_resources));
-}
-
-static void __init rb153_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-       rb153_add_device_cf();
-
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(rb153_gpio_leds),
-                                       rb153_gpio_leds);
-       adm5120_add_device_switch(5, rb153_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_153, "150", "Mikrotik RouterBOARD 153",
-            rb153_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-192.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-192.c
deleted file mode 100644 (file)
index 9049421..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 192 support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static u8 rb192_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb192_setup(void)
-{
-       rb1xx_generic_setup();
-       rb1xx_add_device_nand();
-
-       adm5120_add_device_switch(6, rb192_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_192, "192", "Mikrotik RouterBOARD 192",
-            rb192_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c
deleted file mode 100644 (file)
index 8961115..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 1xx series support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  NAND initialization code was based on a driver for Linux 2.6.19+ which
- *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series boards.
- *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-#define RB1XX_NAND_CHIP_DELAY  25
-
-#define RB1XX_KEYS_POLL_INTERVAL       20
-#define RB1XX_KEYS_DEBOUNCE_INTERVAL   (3 * RB1XX_KEYS_POLL_INTERVAL)
-
-static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
-       PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition rb1xx_nor_parts[] = {
-       {
-               .name   = "booter",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct mtd_partition rb1xx_nand_parts[] = {
-       {
-               .name   = "kernel",
-               .offset = 0,
-               .size   = 4 * 1024 * 1024,
-       } , {
-               .name   = "rootfs",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = MTDPART_SIZ_FULL
-       }
-};
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.  So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb1xx_nand_ecclayout = {
-       .eccbytes       = 6,
-       .eccpos         = { 8, 9, 10, 13, 14, 15 },
-       .oobavail       = 9,
-       .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-/*--------------------------------------------------------------------------*/
-
-static int rb1xx_nand_fixup(struct mtd_info *mtd)
-{
-       struct nand_chip *chip = mtd->priv;
-
-       if (mtd->writesize == 512)
-               chip->ecc.layout = &rb1xx_nand_ecclayout;
-
-       return 0;
-}
-
-struct platform_nand_data rb1xx_nand_data __initdata = {
-       .chip = {
-               .nr_chips       = 1,
-               .nr_partitions  = ARRAY_SIZE(rb1xx_nand_parts),
-               .partitions     = rb1xx_nand_parts,
-               .chip_delay     = RB1XX_NAND_CHIP_DELAY,
-               .chip_fixup     = rb1xx_nand_fixup,
-       },
-};
-
-struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset_button",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN7,
-       }
-};
-
-static void __init rb1xx_mac_setup(void)
-{
-       if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) {
-               adm5120_setup_eth_macs(rb_hs.mac_base);
-       } else {
-               u8 mac[ETH_ALEN];
-
-               random_ether_addr(mac);
-               adm5120_setup_eth_macs(mac);
-       }
-}
-
-void __init rb1xx_add_device_flash(void)
-{
-       /* setup data for flash0 device */
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
-       adm5120_flash0_data.parts = rb1xx_nor_parts;
-       adm5120_flash0_data.window_size = 128*1024;
-
-       adm5120_add_device_flash(0);
-}
-
-void __init rb1xx_add_device_nand(void)
-{
-       /* enable NAND flash interface */
-       adm5120_nand_enable();
-
-       /* initialize NAND chip */
-       adm5120_nand_set_spn(1);
-       adm5120_nand_set_wpn(0);
-
-       adm5120_add_device_nand(&rb1xx_nand_data);
-}
-
-void __init rb1xx_generic_setup(void)
-{
-       if (adm5120_package_bga())
-               adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs),
-                                       rb1xx_pci_irqs);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(rb1xx_gpio_buttons),
-                                     rb1xx_gpio_buttons);
-
-       rb1xx_add_device_flash();
-       rb1xx_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.h
deleted file mode 100644 (file)
index 05e68bd..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 1xx series support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_nand.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/routerboot.h>
-
-extern struct platform_nand_data rb1xx_nand_data __initdata;
-extern struct gpio_keys_button rb1xx_gpio_buttons[] __initdata;
-
-extern void rb1xx_add_device_flash(void) __init;
-extern void rb1xx_add_device_nand(void) __init;
-extern void rb1xx_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/Makefile
deleted file mode 100644 (file)
index 239d5a0..0000000
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_PMUGW)               += pmugw.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/pmugw.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/motorola/pmugw.c
deleted file mode 100644 (file)
index 369892f..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- *  Motorola Powerline MU Gateway board
- *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/admboot.h>
-
-#define PMUGW_CONFIG_OFFSET    0x10000
-#define PMUGW_CONFIG_SIZE      0x1000
-
-static struct mtd_partition pmugw_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "boardcfg",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static u8 pmugw_vlans[6] __initdata = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static __init void pmugw_setup_mac(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(PMUGW_CONFIG_OFFSET,
-                                  PMUGW_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-void __init pmugw_setup(void)
-{
-       /* setup flash A20 line */
-       gpio_request(ADM5120_GPIO_PIN5, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
-       adm5120_flash0_data.parts = pmugw_partitions;
-
-       adm5120_add_device_uart(1); /* ttyAM0 */
-       adm5120_add_device_uart(0); /* ttyAM1 */
-
-       adm5120_add_device_flash(0);
-
-       pmugw_setup_mac();
-       adm5120_add_device_switch(5, pmugw_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_PMUGW, "PMUGW", "Motorola Powerline MU Gateway",
-            pmugw_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/5gxi.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/5gxi.c
deleted file mode 100644 (file)
index a5c2c36..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  OSBRiDGE 5GXi/5XLi board support
- *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-static struct mtd_partition osbridge_5gxi_partitions[] = {
-       {
-               .name   = "bootloader",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "boardcfg",
-               .offset = 64*1024,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct gpio_led osbridge_5gxi_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN6, "5gxi:green:user",      NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "5gxi:yellow:lan",      NULL),
-};
-
-static struct adm5120_pci_irq osbridge_5gxi_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 osbridge_5gxi_vlans[6] __initdata = {
-       0x41, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init osbridge_5gxi_setup(void)
-{
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(osbridge_5gxi_partitions);
-       adm5120_flash0_data.parts = osbridge_5gxi_partitions;
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_switch(1, osbridge_5gxi_vlans);
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(osbridge_5gxi_gpio_leds),
-                                       osbridge_5gxi_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(osbridge_5gxi_pci_irqs),
-                               osbridge_5gxi_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_5GXI, "5GXi", "OSBRiDGE 5GXi/5XLi board",
-            osbridge_5gxi_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/osbridge/Makefile
deleted file mode 100644 (file)
index 34946c5..0000000
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_5GXI)        += 5gxi.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/Makefile
deleted file mode 100644 (file)
index 650be40..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-lib-y  += admboot.o
-lib-y  += bootbase.o
-lib-y  += cfe.o
-lib-y  += generic.o
-lib-y  += myloader.o
-lib-y  += routerboot.o
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/admboot.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/admboot.c
deleted file mode 100644 (file)
index b655390..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- *  ADMBoot specific prom routines
- *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/admboot.h>
-#include "prom_read.h"
-
-#define ADMBOOT_MAGIC_MAC_BASE         0x636D676D      /* 'mgmc' */
-#define ADMBOOT_MAGIC_MAC_BASE_BR6104XX 0x31305348     /* 'HS01' */
-
-int __init admboot_get_mac_base(u32 offset, u32 len, u8 *mac)
-{
-       u8 *cfg;
-       int i;
-
-       cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + offset);
-       for (i = 0; i < len; i += 4) {
-               u32 magic;
-
-               magic = prom_read_le32(cfg + i);
-               if (magic == ADMBOOT_MAGIC_MAC_BASE) {
-                       int j;
-
-                       for (j = 0; j < 6; j++)
-                               mac[j] = cfg[i + 4 + j];
-
-                       return 0;
-               }
-               if (magic == ADMBOOT_MAGIC_MAC_BASE_BR6104XX) {
-                       int j;
-
-                       for (j = 0; j < 6; j++)
-                               mac[j] = cfg[i + 7 + j];
-
-                       return 0;
-               }
-       }
-
-       return -ENXIO;
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/bootbase.c
deleted file mode 100644 (file)
index 063281e..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *  ZyXEL's Bootbase specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/zynos.h>
-#include "prom_read.h"
-
-#define ZYNOS_INFO_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN       KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX       (BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static int bootbase_found;
-static struct zynos_board_info *board_info;
-
-struct bootbase_info bootbase_info;
-
-static inline int bootbase_dbgarea_present(u8 *data)
-{
-       u32 t;
-
-       t = prom_read_be32(data+5);
-       if (t != ZYNOS_MAGIC_DBGAREA1)
-               return 0;
-
-       t = prom_read_be32(data+9);
-       if (t != ZYNOS_MAGIC_DBGAREA2)
-               return 0;
-
-       return 1;
-}
-
-static inline u32 bootbase_get_bootext_addr(void)
-{
-       return prom_read_be32(&board_info->bootext_addr);
-}
-
-static inline void bootbase_get_mac(u8 *mac)
-{
-       int     i;
-
-       for (i = 0; i < 6; i++)
-               mac[i] = board_info->mac[i];
-}
-
-static inline u16 bootbase_get_vendor_id(void)
-{
-#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
-       unsigned char vendor[ZYNOS_NAME_LEN];
-       int i;
-
-       for (i = 0; i < ZYNOS_NAME_LEN; i++)
-               vendor[i] = board_info->vendor[i];
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
-               return ZYNOS_VENDOR_ID_ZYXEL;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
-               return ZYNOS_VENDOR_ID_DLINK;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
-               return ZYNOS_VENDOR_ID_LUCENT;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
-               return ZYNOS_VENDOR_ID_NETGEAR;
-
-       return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 bootbase_get_board_id(void)
-{
-       return prom_read_be16(&board_info->board_id);
-}
-
-int __init bootbase_present(void)
-{
-       u32     t;
-
-       if (bootbase_found)
-               goto out;
-
-       /* check presence of the dbgarea */
-       if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
-               goto out;
-
-       board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
-       /* check for a valid BootExt address */
-       t = bootbase_get_bootext_addr();
-       if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
-               goto out;
-
-       bootbase_info.vendor_id = bootbase_get_vendor_id();
-       bootbase_info.board_id = bootbase_get_board_id();
-       bootbase_get_mac(bootbase_info.mac);
-
-       bootbase_found = 1;
-
-out:
-       return bootbase_found;
-}
-
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/cfe.c
deleted file mode 100644 (file)
index 5a343cd..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  Broadcom's CFE specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <prom/cfe.h>
-#include "prom_read.h"
-
-/*
- * CFE based boards
- */
-#define CFE_EPTSEAL    0x43464531 /* CFE1 is the magic number to recognize CFE
-from other bootloaders */
-
-static int cfe_found;
-
-static u32 cfe_handle;
-static u32 cfe_entry;
-static u32 cfe_seal;
-
-int __init cfe_present(void)
-{
-       /*
-        * This method only works, when we are booted directly from the CFE.
-        */
-       u32 a1 = (u32) fw_arg1;
-
-       if (cfe_found)
-               return 1;
-
-       cfe_handle = (u32) fw_arg0;
-       cfe_entry = (u32) fw_arg2;
-       cfe_seal = (u32) fw_arg3;
-
-       /* Check for CFE by finding the CFE magic number */
-       if (cfe_seal != CFE_EPTSEAL)
-               return 0;
-
-       /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
-       if (a1 != 0)
-               return 0;
-
-       /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
-       if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
-               return 0;
-
-       cfe_found = 1;
-       return 1;
-}
-
-char *cfe_getenv(char *envname)
-{
-       if (cfe_found == 0)
-               return NULL;
-
-       return NULL;
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/generic.c
deleted file mode 100644 (file)
index 4d4caa8..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  Generic PROM routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom/generic.h>
-
-static int *_prom_argc;
-static char **_prom_argv;
-static char **_prom_envp;
-
-char *generic_prom_getenv(char *envname)
-{
-       char **env;
-       char *ret;
-
-       ret = NULL;
-       for (env = _prom_envp; *env != NULL; env++) {
-               if (strcmp(envname, *env++) == 0) {
-                       ret = *env;
-                       break;
-               }
-       }
-
-       return ret;
-}
-
-int generic_prom_present(void)
-{
-       _prom_argc = (int *)fw_arg0;
-       _prom_argv = (char **)fw_arg1;
-       _prom_envp = (char **)fw_arg2;
-
-       return 1;
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/myloader.c
deleted file mode 100644 (file)
index 5357db5..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *  Compex's MyLoader specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/myloader.h>
-#include "prom_read.h"
-
-#define SYS_PARAMS_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR      KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static int myloader_found;
-
-struct myloader_info myloader_info;
-
-int __init myloader_present(void)
-{
-       struct mylo_system_params *sysp;
-       struct mylo_board_params *boardp;
-       struct mylo_partition_table *parts;
-       int i;
-
-       if (myloader_found)
-               goto out;
-
-       sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
-       boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
-       parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
-       /* Check for some magic numbers */
-       if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
-          (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
-          (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
-               goto out;
-
-       myloader_info.vid = le32_to_cpu(sysp->vid);
-       myloader_info.did = le32_to_cpu(sysp->did);
-       myloader_info.svid = le32_to_cpu(sysp->svid);
-       myloader_info.sdid = le32_to_cpu(sysp->sdid);
-
-       for (i = 0; i < MYLO_ETHADDR_COUNT; i++) {
-               int j;
-               for (j = 0; j < 6; j++)
-                       myloader_info.macs[i][j] = boardp->addr[i].mac[j];
-       }
-
-       myloader_found = 1;
-
-out:
-       return myloader_found;
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/prom_read.h
deleted file mode 100644 (file)
index 1a6ea11..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  Generic prom definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_PROM_H_
-#define _ADM5120_PROM_H_
-
-/*
- * Helper routines
- */
-static inline u16 prom_read_le16(void *buf)
-{
-       u8 *p = buf;
-
-       return ((u16)p[0] + ((u16)p[1] << 8));
-}
-
-static inline u32 prom_read_le32(void *buf)
-{
-       u8 *p = buf;
-
-       return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
-               ((u32)p[3] << 24));
-}
-
-static inline u16 prom_read_be16(void *buf)
-{
-       u8 *p = buf;
-
-       return (((u16)p[0] << 8) + (u16)p[1]);
-}
-
-static inline u32 prom_read_be32(void *buf)
-{
-       u8 *p = buf;
-
-       return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
-               ((u32)p[3]));
-}
-
-#endif /* _ADM5120_PROM_H_ */
-
-
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/prom/routerboot.c
deleted file mode 100644 (file)
index d9a06d9..0000000
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Mikrotik's RouterBOOT specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/routerboot.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/routerboot.h>
-#include "prom_read.h"
-
-struct rb_hard_settings rb_hs;
-static int rb_found;
-
-static int __init routerboot_load_hs(u8 *buf, u16 buflen)
-{
-       u16 id, len;
-
-       memset(&rb_hs, 0, sizeof(rb_hs));
-
-       if (buflen < 4)
-               return -1;
-
-       if (prom_read_le32(buf) != RB_MAGIC_HARD)
-               return -1;
-
-       /* skip magic value */
-       buf += 4;
-       buflen -= 4;
-
-       while (buflen > 2) {
-               id = prom_read_le16(buf);
-               buf += 2;
-               buflen -= 2;
-               if (id == RB_ID_TERMINATOR || buflen < 2)
-                       break;
-
-               len = prom_read_le16(buf);
-               buf += 2;
-               buflen -= 2;
-
-               if (buflen < len)
-                       break;
-
-               switch (id) {
-               case RB_ID_BIOS_VERSION:
-                       rb_hs.bios_ver = (char *)buf;
-                       break;
-               case RB_ID_BOARD_NAME:
-                       rb_hs.name = (char *)buf;
-                       break;
-               case RB_ID_MEMORY_SIZE:
-                       rb_hs.mem_size = prom_read_le32(buf);
-                       break;
-               case RB_ID_MAC_ADDRESS_COUNT:
-                       rb_hs.mac_count = prom_read_le32(buf);
-                       break;
-               case RB_ID_MAC_ADDRESS_PACK:
-                       if ((len / RB_MAC_SIZE) > 0)
-                               rb_hs.mac_base = buf;
-                       break;
-               }
-
-               buf += len;
-               buflen -= len;
-
-       }
-
-       return 0;
-}
-
-#define RB_BS_OFFS     0x14
-#define RB_OFFS_MAX    (128*1024)
-
-int __init routerboot_present(void)
-{
-       struct rb_bios_settings *bs;
-       u8 *base;
-       u32 off, len;
-
-       if (rb_found)
-               goto out;
-
-       base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
-       bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
-       off = prom_read_le32(&bs->hs_offs);
-       len = prom_read_le32(&bs->hs_size);
-       if (off > RB_OFFS_MAX)
-               goto out;
-
-       if (routerboot_load_hs(base+off, len) != 0)
-               goto out;
-
-       rb_found = 1;
-
-out:
-       return rb_found;
-}
-
-char *routerboot_get_boardname(void)
-{
-       if (rb_found == 0)
-               return NULL;
-
-       return rb_hs.name;
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/Makefile b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/Makefile
deleted file mode 100644 (file)
index e8325a1..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-y  += p-33x.o
-
-obj-${CONFIG_ADM5120_MACH_P_334WT}     += p-334wt.o
-obj-${CONFIG_ADM5120_MACH_P_335}       += p-335.o
\ No newline at end of file
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-334wt.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-334wt.c
deleted file mode 100644 (file)
index 6cc9aee..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  ZyXEL Prestige P-334WT support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-static struct gpio_led p334wt_gpio_leds[] __initdata = {
-       GPIO_LED_INV(ADM5120_GPIO_PIN2, "power",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan1",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan3",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan4",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan",          NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P4L2, "wlan",         NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P2L2, "otist",        NULL),
-       GPIO_LED_INV(ADM5120_GPIO_P1L2, "hidden",       NULL),
-};
-
-static void __init p334wt_setup(void)
-{
-       p33x_generic_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(p334wt_gpio_leds),
-                                       p334wt_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_P334WT, "P-334WT", "ZyXEL Prestige 334WT",
-            p334wt_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-335.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-335.c
deleted file mode 100644 (file)
index 6ac2b09..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  ZyXEL Prestige P-335/335WT support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-static void __init p335_setup(void)
-{
-       p33x_generic_setup();
-       adm5120_add_device_usb();
-}
-
-MIPS_MACHINE(MACH_ADM5120_P335, "P-335", "ZyXEL Prestige 335/335WT",
-            p335_setup);
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.c
deleted file mode 100644 (file)
index 2626cf9..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  ZyXEL Prestige P-33x boards support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-#include <prom/zynos.h>
-
-#define P33X_GPIO_FLASH_A20    ADM5120_GPIO_PIN5
-static struct mtd_partition p33x_partitions[] = {
-       {
-               .name   = "bootbase",
-               .offset = 0,
-               .size   = 16*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "rom",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 16*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "bootext1",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "bootext2",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "trx",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       } , {
-               .name   = "firmware",
-               .offset = 32*1024,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 p33x_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x50, 0x48, 0x44, 0x42, 0x41, 0x00
-};
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(P33X_GPIO_FLASH_A20, 0);
-               break;
-       case 1:
-               gpio_set_value(P33X_GPIO_FLASH_A20, 1);
-               break;
-       }
-}
-
-void __init p33x_generic_setup(void)
-{
-       /* setup data for flash0 device */
-       gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */
-       gpio_direction_output(P33X_GPIO_FLASH_A20, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
-       adm5120_flash0_data.parts = p33x_partitions;
-       adm5120_add_device_flash(0);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_setup_eth_macs(bootbase_info.mac);
-       adm5120_add_device_switch(6, p33x_vlans);
-
-       adm5120_pci_set_irq_map(ARRAY_SIZE(p33x_pci_irqs), p33x_pci_irqs);
-}
diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.h b/target/linux/adm5120/files-3.8/arch/mips/adm5120/zyxel/p-33x.h
deleted file mode 100644 (file)
index 8a7340c..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  ZyXEL Prestige P-33x boards support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void p33x_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_defs.h
deleted file mode 100644 (file)
index bf220ff..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  ADM5120 SoC definitions
- *
- *  This file defines some constants specific to the ADM5120 SoC
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H
-#define _ASM_MIPS_MACH_ADM5120_DEFS_H
-
-#define ADM5120_SDRAM0_BASE    0x00000000
-#define ADM5120_SDRAM1_BASE    0x01000000
-#define ADM5120_SRAM1_BASE     0x10000000
-#define ADM5120_EXTIO0_BASE    0x10C00000
-#define ADM5120_EXTIO0_SIZE    0x00200000
-#define ADM5120_EXTIO1_BASE    0x10E00000
-#define ADM5120_EXTIO1_SIZE    0x00200000
-#define ADM5120_MPMC_BASE      0x11000000
-#define ADM5120_MPMC_SIZE      0x00200000
-#define ADM5120_USBC_BASE      0x11200000
-#define ADM5120_USBC_SIZE      0x00200000
-#define ADM5120_PCIMEM_BASE    0x11400000
-#define ADM5120_PCIMEM_SIZE    0x00100000
-#define ADM5120_PCIIO_BASE     0x11500000
-#define ADM5120_PCIIO_SIZE     0x000FFFF0
-#define ADM5120_PCICFG_ADDR    0x115FFFF0
-#define ADM5120_PCICFG_DATA    0x115FFFF8
-#define ADM5120_PCICFG_SIZE    0x00000010
-#define ADM5120_SWITCH_BASE    0x12000000
-#define ADM5120_SWITCH_SIZE    0x00200000
-#define ADM5120_INTC_BASE      0x12200000
-#define ADM5120_INTC_SIZE      0x00200000
-#define ADM5120_UART0_BASE     0x12600000
-#define ADM5120_UART1_BASE     0x12800000
-#define ADM5120_UART_SIZE      0x00200000
-#define ADM5120_SRAM0_BASE     0x1FC00000
-
-#define ADM5120_NAND_BASE      ADM5120_SRAM1_BASE
-#define ADM5120_NAND_SIZE      0xB
-
-#define ADM5120_CLK_175                175000000
-#define ADM5120_CLK_200                200000000
-#define ADM5120_CLK_225                225000000
-#define ADM5120_CLK_250                250000000
-
-#define ADM5120_UART_CLOCK     62500000
-
-#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_info.h
deleted file mode 100644 (file)
index 1d34d80..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_INFO_H
-#define _MACH_ADM5120_INFO_H
-
-#include <linux/types.h>
-
-extern unsigned int adm5120_prom_type;
-#define ADM5120_PROM_GENERIC   0
-#define ADM5120_PROM_CFE       1
-#define ADM5120_PROM_MYLOADER  2
-#define ADM5120_PROM_ROUTERBOOT        3
-#define ADM5120_PROM_BOOTBASE  4
-#define ADM5120_PROM_UBOOT     5
-#define ADM5120_PROM_LAST      5
-
-extern unsigned int adm5120_product_code;
-extern unsigned int adm5120_revision;
-extern unsigned int adm5120_nand_boot;
-
-extern unsigned long adm5120_speed;
-#define ADM5120_SPEED_175      175000000
-#define ADM5120_SPEED_200      200000000
-#define ADM5120_SPEED_225      225000000
-#define ADM5120_SPEED_250      250000000
-
-extern unsigned int adm5120_package;
-#define ADM5120_PACKAGE_PQFP   0
-#define ADM5120_PACKAGE_BGA    1
-
-extern unsigned long adm5120_memsize;
-
-enum {
-       MACH_ADM5120_GENERIC = 0,       /* Generic board */
-       MACH_ADM5120_5GXI,              /* OSBRiDGE 5GXi/5XLi */
-       MACH_ADM5120_BR6104K,           /* Edimax BR-6104K */
-       MACH_ADM5120_BR6104KP,          /* Edimax BR-6104KP */
-       MACH_ADM5120_BR61X4WG,          /* Edimax BR-6104Wg/BR-6114WG */
-       MACH_ADM5120_CAS630,            /* Cellvision CAS-630/630W */
-       MACH_ADM5120_CAS670,            /* Cellvision CAS-670/670W */
-       MACH_ADM5120_CAS700,            /* Cellvision CAS-700/700W */
-       MACH_ADM5120_CAS771,            /* Cellvision CAS-771/771W */
-       MACH_ADM5120_CAS790,            /* Cellvision CAS-790 */
-       MACH_ADM5120_CAS861,            /* Cellvision CAS-861/861W */
-       MACH_ADM5120_EASY5120PATA,      /* Infineon EASY 5120P-ATA */
-       MACH_ADM5120_EASY5120RT,        /* Infineon EASY 5120-RT */
-       MACH_ADM5120_EASY5120WVOIP,     /* Infineon EASY 5120-WVoIP */
-       MACH_ADM5120_EASY83000,         /* Infineon EASY-83000 */
-       MACH_ADM5120_ES2108,            /* ZyXEL Ethernet Switch 2108 */
-       MACH_ADM5120_ES2108F,           /* ZyXEL Ethernet Switch 2108-F */
-       MACH_ADM5120_ES2108G,           /* ZyXEL Ethernet Switch 2108-G */
-       MACH_ADM5120_ES2108LC,          /* ZyXEL Ethernet Switch 2108-LC */
-       MACH_ADM5120_ES2108PWR,         /* ZyXEL Ethernet Switch 2108-PWR */
-       MACH_ADM5120_ES2024A,           /* ZyXEL Ethernet Switch 2024A */
-       MACH_ADM5120_ES2024PWR,         /* ZyXEL Ethernet Switch 2024PWR */
-       MACH_ADM5120_HS100,             /* ZyXEL HomeSafe 100/100W */
-       MACH_ADM5120_NFS101U,           /* Cellvision NFS-101U/101WU */
-       MACH_ADM5120_NFS202U,           /* Cellvision NFS-202U/202WU */
-       MACH_ADM5120_NP28G,             /* Compex NP28G */
-       MACH_ADM5120_NP28GHS,           /* Compex NP28G HotSpot */
-       MACH_ADM5120_NP27G,             /* Compex NP27G */
-       MACH_ADM5120_RB_11X,            /* Mikrotik RouterBOARD 111/112 */
-       MACH_ADM5120_RB_133,            /* Mikrotik RouterBOARD 133 */
-       MACH_ADM5120_RB_133C,           /* Mikrotik RouterBOARD 133c */
-       MACH_ADM5120_RB_150,            /* Mikrotik RouterBOARD 150 */
-       MACH_ADM5120_RB_153,            /* Mikrotik RouterBOARD 153 */
-       MACH_ADM5120_RB_192,            /* Mikrotik RouterBOARD 192 */
-       MACH_ADM5120_P334U,             /* ZyXEL Prestige 334U */
-       MACH_ADM5120_P334W,             /* ZyXEL Prestige 334W */
-       MACH_ADM5120_P334WH,            /* ZyXEL Prestige 334WH */
-       MACH_ADM5120_P334WHD,           /* ZyXEL Prestige 334WHD */
-       MACH_ADM5120_P334WT,            /* ZyXEL Prestige 334WT */
-       MACH_ADM5120_P335,              /* ZyXEL Prestige 335/335WT */
-       MACH_ADM5120_P335PLUS,          /* ZyXEL Prestige 335Plus */
-       MACH_ADM5120_P335U,             /* ZyXEL Prestige 335U */
-       MACH_ADM5120_PMUGW,             /* Motorola Powerline MU Gateway */
-       MACH_ADM5120_WP54,              /* Compex WP54G/WP54AG/WPP54G/WPP54AG */
-       MACH_ADM5120_WP54G_WRT,         /* Compex WP54G-WRT */
-       MACH_ADM5120_WP54Gv1C,          /* Compex WP54G version 1C */
-       MACH_ADM5120_EB_214A,           /* Generic EB-214A */
-};
-
-/*
- * TODO:remove adm5120_eth* variables when the switch driver will be
- *     converted into a real platform driver
- */
-extern unsigned int adm5120_eth_num_ports;
-extern unsigned char adm5120_eth_macs[6][6];
-extern unsigned char adm5120_eth_vlans[6];
-
-extern void adm5120_soc_init(void) __init;
-extern void adm5120_mem_init(void) __init;
-extern void adm5120_ndelay(u32 ns);
-
-extern void (*adm5120_board_reset)(void);
-
-extern void adm5120_gpio_init(void) __init;
-extern void adm5120_gpio_csx0_enable(void) __init;
-extern void adm5120_gpio_csx1_enable(void) __init;
-extern void adm5120_gpio_ew_enable(void) __init;
-
-static inline int adm5120_package_pqfp(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_PQFP);
-}
-
-static inline int adm5120_package_bga(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_pci(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_gmii(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-#endif /* _MACH_ADM5120_INFO_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_intc.h
deleted file mode 100644 (file)
index 70dd6bb..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  ADM5120 interrupt controller definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in interrupt controller.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_INTC_H
-#define _MACH_ADM5120_INTC_H
-
-/*
- * INTC register offsets
- */
-#define INTC_REG_IRQ_STATUS            0x00 /* Interrupt status after masking */
-#define INTC_REG_IRQ_RAW_STATUS                0x04 /* Interrupt status before masking */
-#define INTC_REG_IRQ_ENABLE            0x08 /* Used to enable the interrupt sources */
-#define INTC_REG_IRQ_ENABLE_CLEAR      0x0C /* Used to disable the interrupt sources */
-#define INTC_REG_IRQ_DISABLE           INTC_REG_IRQ_ENABLE_CLEAR
-#define INTC_REG_INT_MODE              0x14 /* The interrupt mode of the sources */
-#define INTC_REG_FIQ_STATUS            0x18 /* FIQ status */
-#define INTC_REG_IRQ_TEST_SOURCE       0x1C
-#define INTC_REG_IRQ_SOURCE_SELECT     0x20
-#define INTC_REG_INT_LEVEL             0x24
-
-/*
- * INTC IRQ numbers
- */
-#define INTC_IRQ_TIMER 0       /* built in timer */
-#define INTC_IRQ_UART0 1       /* built-in UART0 */
-#define INTC_IRQ_UART1 2       /* built-in UART1 */
-#define INTC_IRQ_USBC  3       /* USB Host Controller */
-#define INTC_IRQ_GPIO2 4       /* GPIO line 2 */
-#define INTC_IRQ_GPIO4 5       /* GPIO line 4 */
-#define INTC_IRQ_PCI0  6       /* PCI slot 2 */
-#define INTC_IRQ_PCI1  7       /* PCI slot 3 */
-#define INTC_IRQ_PCI2  8       /* PCI slot 4 */
-#define INTC_IRQ_SWITCH        9       /* built-in ethernet switch */
-#define INTC_IRQ_LAST  INTC_IRQ_SWITCH
-#define INTC_IRQ_COUNT 10
-
-/*
- * INTC register bits
- */
-#define INTC_INT_TIMER (1 << INTC_IRQ_TIMER)
-#define INTC_INT_UART0 (1 << INTC_IRQ_UART0)
-#define INTC_INT_UART1 (1 << INTC_IRQ_UART1)
-#define INTC_INT_USBC  (1 << INTC_IRQ_USBC)
-#define INTC_INT_INTX0 (1 << INTC_IRQ_INTX0)
-#define INTC_INT_INTX1 (1 << INTC_IRQ_INTX1)
-#define INTC_INT_PCI0  (1 << INTC_IRQ_PCI0)
-#define INTC_INT_PCI1  (1 << INTC_IRQ_PCI1)
-#define INTC_INT_PCI2  (1 << INTC_IRQ_PCI2)
-#define INTC_INT_SWITCH        (1 << INTC_IRQ_SWITCH)
-#define INTC_INT_ALL   ((1 << INTC_IRQ_COUNT) - 1)
-
-#endif /* _MACH_ADM5120_INTC_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h
deleted file mode 100644 (file)
index c4e9591..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  ADM5120 MPMC (Multiport Memory Controller) register definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_MPMC_H
-#define _MACH_ADM5120_MPMC_H
-
-#define MPMC_READ_REG(r)       __raw_readl( \
-       (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-#define MPMC_WRITE_REG(r, v)   __raw_writel((v), \
-       (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-
-#define MPMC_REG_CTRL  0x0000
-#define MPMC_REG_STATUS        0x0004
-#define MPMC_REG_CONF  0x0008
-#define MPMC_REG_DC    0x0020
-#define MPMC_REG_DR    0x0024
-#define MPMC_REG_DRP   0x0030
-
-#define MPMC_REG_DC0   0x0100
-#define MPMC_REG_DRC0  0x0104
-#define MPMC_REG_DC1   0x0120
-#define MPMC_REG_DRC1  0x0124
-#define MPMC_REG_DC2   0x0140
-#define MPMC_REG_DRC2  0x0144
-#define MPMC_REG_DC3   0x0160
-#define MPMC_REG_DRC3  0x0164
-#define MPMC_REG_SC0   0x0200  /* for F_CS1_N */
-#define MPMC_REG_SC1   0x0220  /* for F_CS0_N */
-#define MPMC_REG_SC2    0x0240
-#define MPMC_REG_WEN2  0x0244
-#define MPMC_REG_OEN2  0x0248
-#define MPMC_REG_RD2   0x024C
-#define MPMC_REG_PG2   0x0250
-#define MPMC_REG_WR2   0x0254
-#define MPMC_REG_TN2   0x0258
-#define MPMC_REG_SC3    0x0260
-
-/* Control register bits */
-#define MPMC_CTRL_AM           (1 << 1)        /* Address Mirror */
-#define MPMC_CTRL_LPM          (1 << 2)        /* Low Power Mode */
-#define MPMC_CTRL_DWB          (1 << 3)        /* Drain Write Buffers */
-
-/* Status register bits */
-#define MPMC_STATUS_BUSY       (1 << 0)        /* Busy */
-#define MPMC_STATUS_WBS                (1 << 1)        /* Write Buffer Status */
-#define MPMC_STATUS_SRA                (1 << 2)        /* Self-Refresh Acknowledge*/
-
-/* Dynamic Control register bits */
-#define MPMC_DC_CE             (1 << 0)
-#define MPMC_DC_DMC            (1 << 1)
-#define MPMC_DC_SRR            (1 << 2)
-#define MPMC_DC_SI_SHIFT       7
-#define MPMC_DC_SI_MASK                (3 << 7)
-#define MPMC_DC_SI_NORMAL      (0 << 7)
-#define MPMC_DC_SI_MODE                (1 << 7)
-#define MPMC_DC_SI_PALL                (2 << 7)
-#define MPMC_DC_SI_NOP         (3 << 7)
-
-#define SRAM_REG_CONF  0x00
-#define SRAM_REG_WWE   0x04
-#define SRAM_REG_WOE   0x08
-#define SRAM_REG_WRD    0x0C
-#define SRAM_REG_WPG    0x10
-#define SRAM_REG_WWR    0x14
-#define SRAM_REG_WTR    0x18
-
-/* Dynamic Configuration register bits */
-#define DC_BE          (1 << 19) /* buffer enable */
-#define DC_RW_SHIFT    28      /* shift for number of rows */
-#define DC_RW_MASK     0x03
-#define DC_NB_SHIFT    26      /* shift for number of banks */
-#define DC_NB_MASK     0x01
-#define DC_CW_SHIFT    22      /* shift for number of columns */
-#define DC_CW_MASK     0x07
-#define DC_DW_SHIFT    7       /* shift for device width */
-#define DC_DW_MASK     0x03
-
-/* Static Configuration register bits */
-#define SC_MW_MASK     0x03    /* memory width mask */
-#define SC_MW_8                0x00    /* 8 bit memory width */
-#define SC_MW_16       0x01    /* 16 bit memory width */
-#define SC_MW_32       0x02    /* 32 bit memory width */
-
-#endif /* _MACH_ADM5120_MPMC_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_nand.h
deleted file mode 100644 (file)
index 1e2f3bd..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- *  ADM5120 NAND interface definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in NAND interface.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  NAND interface routines was based on a driver for Linux 2.6.19+ which
- *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series boards.
- *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_NAND_H
-#define _MACH_ADM5120_NAND_H
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-/* NAND control registers */
-#define NAND_REG_DATA          0x0 /* data register */
-#define NAND_REG_SET_CEn       0x1 /* CE# low */
-#define NAND_REG_CLR_CEn       0x2 /* CE# high */
-#define NAND_REG_CLR_CLE       0x3 /* CLE low */
-#define NAND_REG_SET_CLE       0x4 /* CLE high */
-#define NAND_REG_CLR_ALE       0x5 /* ALE low */
-#define NAND_REG_SET_ALE       0x6 /* ALE high */
-#define NAND_REG_SET_SPn       0x7 /* SP# low (use spare area) */
-#define NAND_REG_CLR_SPn       0x8 /* SP# high (do not use spare area) */
-#define NAND_REG_SET_WPn       0x9 /* WP# low */
-#define NAND_REG_CLR_WPn       0xA /* WP# high */
-#define NAND_REG_STATUS                0xB /* Status register */
-
-#define ADM5120_NAND_STATUS_READY      0x80
-
-#define NAND_READ_REG(r) \
-       readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-#define NAND_WRITE_REG(r, v) \
-       writeb((v), (void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-
-/*-------------------------------------------------------------------------*/
-
-static inline void adm5120_nand_enable(void)
-{
-       SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
-       SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
-}
-
-static inline void adm5120_nand_set_wpn(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
-}
-
-static inline void adm5120_nand_set_spn(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
-}
-
-static inline void adm5120_nand_set_cle(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
-}
-
-static inline void adm5120_nand_set_ale(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
-}
-
-static inline void adm5120_nand_set_cen(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
-}
-
-static inline u8 adm5120_nand_get_status(void)
-{
-       return NAND_READ_REG(NAND_REG_STATUS);
-}
-
-#endif /* _MACH_ADM5120_NAND_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_platform.h
deleted file mode 100644 (file)
index ed73b53..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *  ADM5120 specific platform definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H
-#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-
-struct adm5120_flash_platform_data {
-       void                    (*set_vpp)(struct map_info *, int);
-       void                    (*switch_bank)(unsigned);
-       u32                     window_size;
-       unsigned int            nr_parts;
-       struct mtd_partition    *parts;
-};
-
-struct adm5120_switch_platform_data {
-       /* TODO: not yet implemented */
-};
-
-struct adm5120_pci_irq {
-       u8      slot;
-       u8      func;
-       u8      pin;
-       unsigned irq;
-};
-
-#define PCIIRQ(s, f, p, i) {.slot = (s), .func = (f), .pin  = (p), .irq  = (i)}
-
-#ifdef CONFIG_PCI
-extern void adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map) __init;
-#else
-static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map)
-{
-}
-#endif
-
-extern void adm5120_setup_eth_macs(u8 *mac_base) __init;
-
-extern struct adm5120_flash_platform_data adm5120_flash0_data;
-extern struct adm5120_flash_platform_data adm5120_flash1_data;
-
-extern void adm5120_add_device_flash(unsigned id) __init;
-extern void adm5120_add_device_usb(void) __init;
-extern void adm5120_add_device_uart(unsigned id) __init;
-extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init;
-extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init;
-extern void adm5120_register_gpio_buttons(int id,
-                                         unsigned poll_interval,
-                                         unsigned nbuttons,
-                                         struct gpio_keys_button *buttons);
-
-#define GPIO_LED_DEF(g, n, t, a) {     \
-       .name = (n),                    \
-       .default_trigger = (t),         \
-       .gpio = (g),                    \
-       .active_low = (a)               \
-}
-
-#define GPIO_LED_STD(g, n, t)  GPIO_LED_DEF((g), (n), (t), 0)
-#define GPIO_LED_INV(g, n, t)  GPIO_LED_DEF((g), (n), (t), 1)
-
-extern void adm5120_add_device_gpio_leds(unsigned num_leds,
-                                       struct gpio_led *leds) __init;
-
-#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_switch.h
deleted file mode 100644 (file)
index 91adc5b..0000000
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- *  ADM5120 ethernet switch definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in Ethernet switch.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_SWITCH_H
-#define _MACH_ADM5120_SWITCH_H
-
-#ifndef BIT
-#  define BIT(at)      (1 << (at))
-#endif
-#define BITMASK(len)   (BIT(len)-1)
-
-#define SW_READ_REG(r)         __raw_readl( \
-       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-#define SW_WRITE_REG(r, v)     __raw_writel((v), \
-       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-/* Switch register offsets */
-#define SWITCH_REG_CODE                0x0000
-#define SWITCH_REG_SOFT_RESET  0x0004  /* Soft Reset */
-#define SWITCH_REG_BOOT_DONE   0x0008  /* Boot Done */
-#define SWITCH_REG_SW_RESET    0x000C  /* Switch Reset */
-#define SWITCH_REG_PHY_STATUS  0x0014  /* PHY Status */
-#define SWITCH_REG_MEMCTRL     0x001C  /* Memory Control */
-#define SWITCH_REG_CPUP_CONF   0x0024  /* CPU Port Configuration */
-#define SWITCH_REG_PORT_CONF0  0x0028  /* Port Configuration 0 */
-#define SWITCH_REG_PORT_CONF1  0x002C  /* Port Configuration 1 */
-#define SWITCH_REG_PORT_CONF2  0x0030  /* Port Configuration 2 */
-#define SWITCH_REG_VLAN_G1     0x0040  /* VLAN group 1 */
-#define SWITCH_REG_VLAN_G2     0x0044  /* VLAN group 2 */
-#define SWITCH_REG_SEND_TRIG   0x0048  /* Send Trigger */
-#define SWITCH_REG_MAC_WT0     0x0058  /* MAC Write Address 0 */
-#define SWITCH_REG_MAC_WT1     0x005C  /* MAC Write Address 1 */
-#define SWITCH_REG_BW_CNTL0    0x0060  /* Bandwidth Control 0 */
-#define SWITCH_REG_BW_CNTL1    0x0064  /* Bandwidth Control 1 */
-#define SWITCH_REG_PHY_CNTL0   0x0068  /* PHY Control 0 */
-#define SWITCH_REG_PHY_CNTL1   0x006C  /* PHY Control 1 */
-#define SWITCH_REG_PORT_TH     0x0078  /* Port Threshold */
-#define SWITCH_REG_PHY_CNTL2   0x007C  /* PHY Control 2 */
-#define SWITCH_REG_PHY_CNTL3   0x0080  /* PHY Control 3 */
-#define SWITCH_REG_PRI_CNTL    0x0084  /* Priority Control */
-#define SWITCH_REG_PHY_CNTL4   0x00A0  /* PHY Control 4 */
-#define SWITCH_REG_EMPTY_CNT   0x00A4  /* Empty Count */
-#define SWITCH_REG_PORT_CNTLS  0x00A8  /* Port Control Select */
-#define SWITCH_REG_PORT_CNTL   0x00AC  /* Port Control */
-#define SWITCH_REG_INT_STATUS  0x00B0  /* Interrupt Status */
-#define SWITCH_REG_INT_MASK    0x00B4  /* Interrupt Mask */
-#define SWITCH_REG_GPIO_CONF0  0x00B8  /* GPIO Configuration 0 */
-#define SWITCH_REG_GPIO_CONF2  0x00BC  /* GPIO Configuration 1 */
-#define SWITCH_REG_WDOG0       0x00C0  /* Watchdog 0 */
-#define SWITCH_REG_WDOG1       0x00C4  /* Watchdog 1 */
-
-#define SWITCH_REG_SHDA                0x00D0  /* Send High Descriptors Address */
-#define SWITCH_REG_SLDA                0x00D4  /* Send Low Descriptors Address */
-#define SWITCH_REG_RHDA                0x00D8  /* Receive High Descriptor Address */
-#define SWITCH_REG_RLDA                0x00DC  /* Receive Low Descriptor Address */
-#define SWITCH_REG_SHWA                0x00E0  /* Send High Working Address */
-#define SWITCH_REG_SLWA                0x00E4  /* Send Low Working Address */
-#define SWITCH_REG_RHWA                0x00E8  /* Receive High Working Address */
-#define SWITCH_REG_RLWA                0x00EC  /* Receive Low Working Address */
-
-#define SWITCH_REG_TIMER_INT   0x00F0  /* Timer */
-#define SWITCH_REG_TIMER       0x00F4  /* Timer Interrupt */
-
-#define SWITCH_REG_PORT0_LED   0x0100
-#define SWITCH_REG_PORT1_LED   0x0104
-#define SWITCH_REG_PORT2_LED   0x0108
-#define SWITCH_REG_PORT3_LED   0x010C
-#define SWITCH_REG_PORT4_LED   0x0110
-
-/* CODE register bits */
-#define CODE_PC_MASK           BITMASK(16)     /* Product Code */
-#define CODE_REV_SHIFT         16
-#define CODE_REV_MASK          BITMASK(4)      /* Product Revision */
-#define CODE_CLKS_SHIFT                20
-#define CODE_CLKS_MASK         BITMASK(2)      /* Clock Speed */
-#define CODE_CLKS_175          0               /* 175 MHz */
-#define CODE_CLKS_200          1               /* 200 MHz */
-#define CODE_CLKS_225          2               /* 225 MHz */
-#define CODE_CLKS_250          3               /* 250 MHz */
-#define CODE_NAB               BIT(24)         /* NAND boot */
-#define CODE_PK_MASK           BITMASK(1)      /* Package type */
-#define CODE_PK_SHIFT          29
-#define CODE_PK_BGA            0               /* BGA package */
-#define CODE_PK_PQFP           1               /* PQFP package */
-
-/* MEMCTRL register bits */
-#define MEMCTRL_SDRS_MASK      BITMASK(3)      /* SDRAM bank size */
-#define MEMCTRL_SDRS_4M                0x01
-#define MEMCTRL_SDRS_8M                0x02
-#define MEMCTRL_SDRS_16M       0x03
-#define MEMCTRL_SDRS_64M       0x04
-#define MEMCTRL_SDRS_128M      0x05
-#define MEMCTRL_SDR1_ENABLE    BIT(5)          /* enable SDRAM bank 1 */
-
-#define MEMCTRL_SRS0_SHIFT     8               /* shift for SRAM0 size */
-#define MEMCTRL_SRS1_SHIFT     16              /* shift for SRAM1 size */
-#define MEMCTRL_SRS_MASK       BITMASK(3)      /* SRAM size mask */
-#define MEMCTRL_SRS_DISABLED   0x00            /* Disabled */
-#define MEMCTRL_SRS_512K       0x01            /* 512KB*/
-#define MEMCTRL_SRS_1M         0x02            /* 1MB */
-#define MEMCTRL_SRS_2M         0x03            /* 2MB */
-#define MEMCTRL_SRS_4M         0x04            /* 4MB */
-
-/* Port bits used in various registers */
-#define SWITCH_PORT_PHY0       BIT(0)
-#define SWITCH_PORT_PHY1       BIT(1)
-#define SWITCH_PORT_PHY2       BIT(2)
-#define SWITCH_PORT_PHY3       BIT(3)
-#define SWITCH_PORT_PHY4       BIT(4)
-#define SWITCH_PORT_MII                BIT(5)
-#define SWITCH_PORT_CPU                BIT(6)
-
-/* Port bit shorthands */
-#define SWITCH_PORTS_PHY       0x1F    /* phy ports */
-#define SWITCH_PORTS_NOCPU     0x3F    /* physical ports */
-#define SWITCH_PORTS_ALL       0x7F    /* all ports */
-
-/* CPUP_CONF register bits */
-#define CPUP_CONF_DCPUP                BIT(0)  /* Disable CPU port */
-#define CPUP_CONF_CRCP         BIT(1)  /* CRC padding from CPU */
-#define CPUP_CONF_BTM          BIT(2)  /* Bridge Testing Mode */
-#define CPUP_CONF_DUNP_SHIFT   9       /* Disable Unknown Packets for portX */
-#define CPUP_CONF_DMCP_SHIFT   16      /* Disable Mcast Packets form portX */
-#define CPUP_CONF_DBCP_SHIFT   24      /* Disable Bcast Packets form portX */
-
-/* PORT_CONF0 register bits */
-#define PORT_CONF0_DP_SHIFT    0       /* Disable Port */
-#define PORT_CONF0_EMCP_SHIFT  8       /* Enable All MC Packets */
-#define PORT_CONF0_BP_SHIFT    16      /* Enable Back Pressure */
-
-/* PORT_CONF1 register bits */
-#define PORT_CONF1_DISL_SHIFT  0       /* Disable Learning */
-#define PORT_CONF1_BS_SHIFT    6       /* Blocking State */
-#define PORT_CONF1_BM_SHIFT    12      /* Blocking Mode */
-
-/* SEND_TRIG register bits */
-#define SEND_TRIG_STL          BIT(0)  /* Send Trigger Low */
-#define SEND_TRIG_STH          BIT(1)  /* Send Trigger High */
-
-/* MAC_WT0 register bits */
-#define MAC_WT0_MAWC           BIT(0)  /* MAC address write command */
-#define MAC_WT0_MWD_SHIFT      1
-#define MAC_WT0_MWD            BIT(1)  /* MAC write done */
-#define MAC_WT0_WFB            BIT(2)  /* Write Filter Bit */
-#define MAC_WT0_WVN_SHIFT      3       /* Write Vlan Number shift */
-#define MAC_WT0_WVE            BIT(6)  /* Write VLAN enable */
-#define MAC_WT0_WPMN_SHIFT     7
-#define MAC_WT0_WAF_SHIFT      13      /* Write Age Field shift */
-#define MAC_WT0_WAF_EMPTY      0
-#define MAC_WT0_WAF_STATIC     7       /* age: static */
-#define MAC_WT0_MAC0_SHIFT     16
-#define MAC_WT0_MAC1_SHIFT     24
-
-/* MAC_WT1 register bits */
-#define MAC_WT1_MAC2_SHIFT     0
-#define MAC_WT1_MAC3_SHIFT     8
-#define MAC_WT1_MAC4_SHIFT     16
-#define MAC_WT1_MAC5_SHIFT     24
-
-/* BW_CNTL0/BW_CNTL1 register bits */
-#define BW_CNTL_DISABLE                0x00
-#define BW_CNTL_64K            0x01
-#define BW_CNTL_128K           0x02
-#define BW_CNTL_256K           0x03
-#define BW_CNTL_512K           0x04
-#define BW_CNTL_1M             0x05
-#define BW_CNTL_4M             0x06
-#define BW_CNTL_10M            0x07
-
-#define P4TBC_SHIFT            0
-#define P4RBC_SHIFT            4
-#define P5TBC_SHIFT            8
-#define P5RBC_SHIFT            12
-
-#define BW_CNTL1_NAND_ENABLE   0x100
-
-/* PHY_CNTL0 register bits */
-#define PHY_CNTL0_PHYA_MASK    BITMASK(5)
-#define PHY_CNTL0_PHYR_MASK    BITMASK(5)
-#define PHY_CNTL0_PHYR_SHIFT   8
-#define PHY_CNTL0_WC           BIT(13)         /* Write Command */
-#define PHY_CNTL0_RC           BIT(14)         /* Read Command */
-#define PHY_CNTL0_WTD_MASK     BIT(16)         /* Read Command */
-#define PHY_CNTL0_WTD_SHIFT    16
-
-/* PHY_CNTL1 register bits */
-#define PHY_CNTL1_WOD          BIT(0)          /* Write Operation Done */
-#define PHY_CNTL1_ROD          BIT(1)          /* Read Operation Done */
-#define PHY_CNTL1_RD_MASK      BITMASK(16)
-#define PHY_CNTL1_RD_SHIFT     16
-
-/* PHY_CNTL2 register bits */
-#define PHY_CNTL2_ANE_SHIFT    0       /* Auto Negotiation Enable */
-#define PHY_CNTL2_SC_SHIFT     5       /* Speed Control */
-#define PHY_CNTL2_DC_SHIFT     10      /* Duplex Control */
-#define PHY_CNTL2_FNCV_SHIFT   15      /* Recommended FC Value */
-#define PHY_CNTL2_PHYR_SHIFT   20      /* PHY reset */
-#define PHY_CNTL2_AMDIX_SHIFT  25      /* Auto MDIX enable */
-/* PHY_CNTL2_RMAE is bad in datasheet */
-#define PHY_CNTL2_RMAE         BIT(31) /* Recommended MCC Average enable */
-
-/* PHY_CNTL3 register bits */
-#define PHY_CNTL3_RNT          BIT(10) /* Recommend Normal Threshold */
-
-/* PORT_TH register bits */
-#define PORT_TH_PPT_MASK       BITMASK(8)      /* Per Port Threshold */
-#define PORT_TH_CPUT_SHIFT     8               /* CPU Port Buffer Threshold */
-#define PORT_TH_CPUT_MASK      BITMASK(8)
-#define PORT_TH_CPUHT_SHIFT    16              /* CPU Hold Threshold */
-#define PORT_TH_CPUHT_MASK     BITMASK(8)
-#define PORT_TH_CPURT_SHIFT    24              /* CPU Release Threshold */
-#define PORT_TH_CPURT_MASK     BITMASK(8)
-
-/* EMPTY_CNT register bits */
-#define EMPTY_CNT_EBGB_MASK    BITMASK(9) /* Empty Blocks in the Global Buffer */
-
-/* GPIO_CONF0 register bits */
-#define GPIO_CONF0_MASK                BITMASK(8)
-#define GPIO_CONF0_IM_SHIFT    0
-#define GPIO_CONF0_IV_SHIFT    8
-#define GPIO_CONF0_OE_SHIFT    16
-#define GPIO_CONF0_OV_SHIFT    24
-#define GPIO_CONF0_IM_MASK     (0xFF << GPIO_CONF0_IM_SHIFT)
-#define GPIO_CONF0_IV_MASK     (0xFF << GPIO_CONF0_IV_SHIFT)
-#define GPIO_CONF0_OE_MASK     (0xFF << GPIO_CONF0_OE_SHIFT)
-#define GPIO_CONF0_OV_MASK     (0xFF << GPIO_CONF0_OV_SHIFT)
-
-/* GPIO_CONF2 register bits */
-#define GPIO_CONF2_CSX0                BIT(4)  /* enable CSX0:INTX0 on GPIO 1:2 */
-#define GPIO_CONF2_CSX1                BIT(5)  /* enable CSX1:INTX1 on GPIO 3:4 */
-#define GPIO_CONF2_EW          BIT(6)  /* enable wait state pin for CSX0/1 */
-
-/* INT_STATUS/INT_MASK register bits */
-#define SWITCH_INT_SHD         BIT(0)  /* Send High Done */
-#define SWITCH_INT_SLD         BIT(1)  /* Send Low Done */
-#define SWITCH_INT_RHD         BIT(2)  /* Receive High Done */
-#define SWITCH_INT_RLD         BIT(3)  /* Receive Low Done */
-#define SWITCH_INT_HDF         BIT(4)  /* High Descriptor Full */
-#define SWITCH_INT_LDF         BIT(5)  /* Low Descriptor Full */
-#define SWITCH_INT_P0QF                BIT(6)  /* Port0 Queue Full */
-#define SWITCH_INT_P1QF                BIT(7)  /* Port1 Queue Full */
-#define SWITCH_INT_P2QF                BIT(8)  /* Port2 Queue Full */
-#define SWITCH_INT_P3QF                BIT(9)  /* Port3 Queue Full */
-#define SWITCH_INT_P4QF                BIT(10) /* Port4 Queue Full */
-#define SWITCH_INT_P5QF                BIT(11) /* Port5 Queue Full */
-#define SWITCH_INT_CPQF                BIT(13) /* CPU Queue Full */
-#define SWITCH_INT_GQF         BIT(14) /* Global Queue Full */
-#define SWITCH_INT_MD          BIT(15) /* Must Drop */
-#define SWITCH_INT_BCS         BIT(16) /* BC Storm */
-#define SWITCH_INT_PSC         BIT(18) /* Port Status Change */
-#define SWITCH_INT_ID          BIT(19) /* Intruder Detected */
-#define SWITCH_INT_W0TE                BIT(20) /* Watchdog 0 Timer Expired */
-#define SWITCH_INT_W1TE                BIT(21) /* Watchdog 1 Timer Expired */
-#define SWITCH_INT_RDE         BIT(22) /* Receive Descriptor Error */
-#define SWITCH_INT_SDE         BIT(23) /* Send Descriptor Error */
-#define SWITCH_INT_CPUH                BIT(24) /* CPU Hold */
-
-/* TIMER_INT register bits */
-#define TIMER_INT_TOS          BIT(0)  /* time-out status */
-#define TIMER_INT_TOM          BIT(16) /* mask time-out interrupt */
-
-/* TIMER register bits */
-#define TIMER_PERIOD_MASK      BITMASK(16)     /* mask for timer period */
-#define TIMER_PERIOD_DEFAULT   0xFFFF          /* default timer period */
-#define TIMER_TE               BIT(16) /* timer enable bit */
-
-/* PORTx_LED register bits */
-#define LED_MODE_MASK          BITMASK(4)
-#define LED_MODE_INPUT         0
-#define LED_MODE_FLASH         1
-#define LED_MODE_OUT_HIGH      2
-#define LED_MODE_OUT_LOW       3
-#define LED_MODE_LINK          4
-#define LED_MODE_SPEED         5
-#define LED_MODE_DUPLEX                6
-#define LED_MODE_ACT           7
-#define LED_MODE_COLL          8
-#define LED_MODE_LINK_ACT      9
-#define LED_MODE_DUPLEX_COLL   10
-#define LED_MODE_10M_ACT       11
-#define LED_MODE_100M_ACT      12
-#define LED0_MODE_SHIFT                0       /* LED0 mode shift */
-#define LED1_MODE_SHIFT                4       /* LED1 mode shift */
-#define LED2_MODE_SHIFT                8       /* LED2 mode shift */
-#define LED0_IV_SHIFT          12      /* LED0 input value shift */
-#define LED1_IV_SHIFT          13      /* LED1 input value shift */
-#define LED2_IV_SHIFT          14      /* LED2 input value shift */
-
-#endif /* _MACH_ADM5120_SWITCH_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/adm5120_uart.h
deleted file mode 100644 (file)
index 81d3067..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  ADM5120 UART definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in UARTs.
- *
- *  Copyright (C) 2007 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_UART_H
-#define _MACH_ADM5120_UART_H
-
-#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
-
-#define UART_REG_DATA  0x00
-#define UART_REG_RSR   0x04
-#define UART_REG_ECR   UART_REG_RSR
-#define UART_REG_LCRH  0x08
-#define UART_REG_LCRM  0x0C
-#define UART_REG_LCRL  0x10
-#define UART_REG_CTRL  0x14
-#define UART_REG_FLAG  0x18
-
-/* Receive Status Register bits */
-#define UART_RSR_FE    (1 << 0)
-#define UART_RSR_PE    (1 << 1)
-#define UART_RSR_BE    (1 << 2)
-#define UART_RSR_OE    (1 << 3)
-#define UART_RSR_ERR   (UART_RSR_FE | UART_RSR_PE | UART_RSR_BE)
-
-#define UART_ECR_ALL   0xFF
-
-/* Line Control High register bits */
-#define UART_LCRH_BRK  (1 << 0) /* send break */
-#define UART_LCRH_PEN  (1 << 1) /* parity enable */
-#define UART_LCRH_EPS  (1 << 2) /* even parity select */
-#define UART_LCRH_STP1 (0 << 3) /* one stop bits select */
-#define UART_LCRH_STP2 (1 << 3) /* two stop bits select */
-#define UART_LCRH_FEN  (1 << 4) /* FIFO enable */
-
-#define UART_LCRH_WLEN5        (0 << 5)
-#define UART_LCRH_WLEN6        (1 << 5)
-#define UART_LCRH_WLEN7        (2 << 5)
-#define UART_LCRH_WLEN8        (3 << 5)
-
-/* Control register bits */
-#define UART_CTRL_EN   (1 << 0)
-
-/* Flag register bits */
-#define UART_FLAG_CTS  (1 << 0)
-#define UART_FLAG_DSR  (1 << 1)
-#define UART_FLAG_DCD  (1 << 2)
-#define UART_FLAG_BUSY (1 << 3)
-#define UART_FLAG_RXFE (1 << 4)
-#define UART_FLAG_TXFF (1 << 5)
-#define UART_FLAG_RXFF (1 << 6)
-#define UART_FLAG_TXFE (1 << 7)
-
-#endif /* _MACH_ADM5120_UART_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/asm/sizes.h
deleted file mode 100644 (file)
index 503843d..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/*  Size definitions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h                       1
-
-/* handy sizes */
-#define SZ_16                          0x00000010
-#define SZ_256                         0x00000100
-#define SZ_512                         0x00000200
-
-#define SZ_1K                           0x00000400
-#define SZ_4K                           0x00001000
-#define SZ_8K                           0x00002000
-#define SZ_16K                          0x00004000
-#define SZ_64K                          0x00010000
-#define SZ_128K                         0x00020000
-#define SZ_256K                         0x00040000
-#define SZ_512K                         0x00080000
-
-#define SZ_1M                           0x00100000
-#define SZ_2M                           0x00200000
-#define SZ_4M                           0x00400000
-#define SZ_8M                           0x00800000
-#define SZ_16M                          0x01000000
-#define SZ_32M                          0x02000000
-#define SZ_64M                          0x04000000
-#define SZ_128M                         0x08000000
-#define SZ_256M                         0x10000000
-#define SZ_512M                         0x20000000
-
-#define SZ_1G                           0x40000000
-#define SZ_2G                           0x80000000
-
-#endif
-
-/*         END */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h
deleted file mode 100644 (file)
index c6310cc..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  ADM5120 specific CPU feature overrides
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was derived from: include/asm-mips/cpu-features.h
- *     Copyright (C) 2003, 2004 Ralf Baechle
- *     Copyright (C) 2004 Maciej W. Rozycki
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-
-/*
- * The ADM5120 SOC has a built-in MIPS 4Kc core.
- */
-#define cpu_has_tlb                    1
-#define cpu_has_4kex                   1
-#define cpu_has_3k_cache               0
-#define cpu_has_4k_cache               1
-#define cpu_has_tx39_cache             0
-#define cpu_has_sb1_cache              0
-#define cpu_has_fpu                    0
-#define cpu_has_32fpr                  0
-#define cpu_has_counter                        1
-#define cpu_has_watch                  1
-#define cpu_has_divec                  1
-/* #define cpu_has_vce                 ? */
-/* #define cpu_has_cache_cdex_p                ? */
-/* #define cpu_has_cache_cdex_s                ? */
-#define cpu_has_prefetch               1
-/* #define cpu_has_mcheck              ? */
-#define cpu_has_ejtag                  1
-#define cpu_has_llsc                   1
-
-#define cpu_has_mips16                 0
-#define cpu_has_mdmx                   0
-#define cpu_has_mips3d                 0
-#define cpu_has_smartmips              0
-
-/* #define cpu_has_vtag_icache         ? */
-/* #define cpu_has_dc_aliases          ? */
-/* #define cpu_has_ic_fills_f_dc       ? */
-/* #define cpu_has_pindexed_dcache     ? */
-
-/* #define cpu_icache_snoops_remote_store      ? */
-
-#define cpu_has_mips32r1               1
-#define cpu_has_mips32r2               0
-#define cpu_has_mips64r1               0
-#define cpu_has_mips64r2               0
-
-#define cpu_has_dsp                    0
-#define cpu_has_mipsmt                 0
-
-/* #define cpu_has_nofpuex             ? */
-#define cpu_has_64bits                 0
-#define cpu_has_64bit_zero_reg         0
-#define cpu_has_64bit_gp_regs          0
-#define cpu_has_64bit_addresses                0
-
-/* #define cpu_has_inclusive_pcaches   ? */
-
-#define cpu_dcache_line_size()         16
-#define cpu_icache_line_size()         16
-
-#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/gpio.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/gpio.h
deleted file mode 100644 (file)
index 7ba7efc..0000000
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  ADM5120 GPIO wrappers for arch-neutral GPIO calls
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H
-#define _ASM_MIPS_MACH_ADM5120_GPIO_H
-
-#define ARCH_NR_GPIOS  64
-
-#include <asm-generic/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define ADM5120_GPIO_PIN0      0
-#define ADM5120_GPIO_PIN1      1
-#define ADM5120_GPIO_PIN2      2
-#define ADM5120_GPIO_PIN3      3
-#define ADM5120_GPIO_PIN4      4
-#define ADM5120_GPIO_PIN5      5
-#define ADM5120_GPIO_PIN6      6
-#define ADM5120_GPIO_PIN7      7
-#define ADM5120_GPIO_P0L0      8
-#define ADM5120_GPIO_P0L1      9
-#define ADM5120_GPIO_P0L2      10
-#define ADM5120_GPIO_P1L0      11
-#define ADM5120_GPIO_P1L1      12
-#define ADM5120_GPIO_P1L2      13
-#define ADM5120_GPIO_P2L0      14
-#define ADM5120_GPIO_P2L1      15
-#define ADM5120_GPIO_P2L2      16
-#define ADM5120_GPIO_P3L0      17
-#define ADM5120_GPIO_P3L1      18
-#define ADM5120_GPIO_P3L2      19
-#define ADM5120_GPIO_P4L0      20
-#define ADM5120_GPIO_P4L1      21
-#define ADM5120_GPIO_P4L2      22
-#define ADM5120_GPIO_MAX       22
-#define ADM5120_GPIO_COUNT     ADM5120_GPIO_MAX+1
-
-#define ADM5120_GPIO_LOW       0
-#define ADM5120_GPIO_HIGH      1
-
-#define ADM5120_GPIO_SWITCH    0x10
-#define ADM5120_GPIO_FLASH     (ADM5120_GPIO_SWITCH | LED_MODE_FLASH)
-#define ADM5120_GPIO_LINK      (ADM5120_GPIO_SWITCH | LED_MODE_LINK)
-#define ADM5120_GPIO_SPEED     (ADM5120_GPIO_SWITCH | LED_MODE_SPEED)
-#define ADM5120_GPIO_DUPLEX    (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX)
-#define ADM5120_GPIO_ACT       (ADM5120_GPIO_SWITCH | LED_MODE_ACT)
-#define ADM5120_GPIO_COLL      (ADM5120_GPIO_SWITCH | LED_MODE_COLL)
-#define ADM5120_GPIO_LINK_ACT  (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT)
-#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL)
-#define ADM5120_GPIO_10M_ACT   (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT)
-#define ADM5120_GPIO_100M_ACT  (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT)
-
-extern int  __adm5120_gpio0_get_value(unsigned gpio);
-extern void __adm5120_gpio0_set_value(unsigned gpio, int value);
-extern int  __adm5120_gpio1_get_value(unsigned gpio);
-extern void __adm5120_gpio1_set_value(unsigned gpio, int value);
-extern int  adm5120_gpio_to_irq(unsigned gpio);
-extern int  adm5120_irq_to_gpio(unsigned irq);
-
-static inline int gpio_get_value(unsigned gpio)
-{
-       int ret;
-
-       switch (gpio) {
-       case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
-               ret = __adm5120_gpio0_get_value(gpio);
-               break;
-       case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
-               ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0);
-               break;
-       default:
-               ret = __gpio_get_value(gpio);
-               break;
-       }
-
-       return ret;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-       switch (gpio) {
-       case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
-               __adm5120_gpio0_set_value(gpio, value);
-               break;
-       case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
-               __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value);
-               break;
-       default:
-               __gpio_set_value(gpio, value);
-               break;
-       }
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-       return adm5120_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-       return adm5120_irq_to_gpio(irq);
-}
-
-#define gpio_cansleep  __gpio_cansleep
-
-#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/irq.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/irq.h
deleted file mode 100644 (file)
index b0350c8..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  ADM5120 specific IRQ numbers
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H
-#define _ASM_MIPS_MACH_ADM5120_IRQ_H
-
-#define MIPS_CPU_IRQ_BASE      0
-#define NR_IRQS                        24
-
-#include_next <irq.h>
-
-#include <asm/mach-adm5120/adm5120_intc.h>
-
-#define NO_IRQ                 (-1)
-
-#define MIPS_CPU_IRQ_COUNT     8
-#define MIPS_CPU_IRQ(x)                (MIPS_CPU_IRQ_BASE + (x))
-
-#define ADM5120_INTC_IRQ_BASE  (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT)
-#define ADM5120_INTC_IRQ(x)    (ADM5120_INTC_IRQ_BASE + (x))
-
-#define ADM5120_IRQ_INTC       MIPS_CPU_IRQ(2)
-#define ADM5120_IRQ_COUNTER    MIPS_CPU_IRQ(7)
-
-#define ADM5120_IRQ_TIMER      ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
-#define ADM5120_IRQ_UART0      ADM5120_INTC_IRQ(INTC_IRQ_UART0)
-#define ADM5120_IRQ_UART1      ADM5120_INTC_IRQ(INTC_IRQ_UART1)
-#define ADM5120_IRQ_USBC       ADM5120_INTC_IRQ(INTC_IRQ_USBC)
-#define ADM5120_IRQ_GPIO2      ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
-#define ADM5120_IRQ_GPIO4      ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
-#define ADM5120_IRQ_PCI0       ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
-#define ADM5120_IRQ_PCI1       ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
-#define ADM5120_IRQ_PCI2       ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
-#define ADM5120_IRQ_SWITCH     ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
-
-#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/admboot.h
deleted file mode 100644 (file)
index fa42bf7..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  ADMBoot specific definitions
- *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADMBOOT_H
-#define _ADMBOOT_H
-
-extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init;
-
-#endif /* _ADMBOOT_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/cfe.h
deleted file mode 100644 (file)
index 0cb3eee..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Broadcom's CFE definitions
- *
- *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_CFE_H_
-#define _PROM_CFE_H_
-
-extern int cfe_present(void) __init;
-extern char *cfe_getenv(char *);
-
-#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/generic.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/generic.h
deleted file mode 100644 (file)
index 778df24..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Generic prom definitions
- *
- *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_GENERIC_H_
-#define _PROM_GENERIC_H_
-
-extern int generic_prom_present(void) __init;
-extern char *generic_prom_getenv(char *);
-
-#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/myloader.h
deleted file mode 100644 (file)
index ea8db81..0000000
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- *  Compex's MyLoader specific definitions
- *
- *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MYLOADER_H_
-#define _MYLOADER_H_
-
-/*
- * Firmware file format:
- *
- *     <header>
- *     [<block descriptor 0>]
- *     ...
- *     [<block descriptor n>]
- *     <null block descriptor>
- *     [<block data 0>]
- *     ...
- *     [<block data n>]
- *
- *
- */
-
-/* Myloader specific magic numbers */
-#define MYLO_MAGIC_FIRMWARE    0x4C594D00
-#define MYLO_MAGIC_20021103    0x20021103
-#define MYLO_MAGIC_20021107    0x20021107
-
-#define MYLO_MAGIC_SYS_PARAMS  MYLO_MAGIC_20021107
-#define MYLO_MAGIC_PARTITIONS  MYLO_MAGIC_20021103
-#define MYLO_MAGIC_BOARD_PARAMS        MYLO_MAGIC_20021103
-
-/*
- * Addresses of the data structures provided by MyLoader
- */
-#define MYLO_MIPS_SYS_PARAMS   0x80000800      /* System Parameters */
-#define MYLO_MIPS_BOARD_PARAMS 0x80000A00      /* Board Parameters */
-#define MYLO_MIPS_PARTITIONS   0x80000C00      /* Partition Table */
-#define MYLO_MIPS_BOOT_PARAMS  0x80000E00      /* Boot Parameters */
-
-/* Vendor ID's (seems to be same as the PCI vendor ID's) */
-#define VENID_COMPEX           0x11F6
-
-/* Devices based on the ADM5120 */
-#define DEVID_COMPEX_NP27G     0x0078
-#define DEVID_COMPEX_NP28G     0x044C
-#define DEVID_COMPEX_NP28GHS   0x044E
-#define DEVID_COMPEX_WP54Gv1C  0x0514
-#define DEVID_COMPEX_WP54G     0x0515
-#define DEVID_COMPEX_WP54AG    0x0546
-#define DEVID_COMPEX_WPP54AG   0x0550
-#define DEVID_COMPEX_WPP54G    0x0555
-
-/* Devices based on the IXP422 */
-#define DEVID_COMPEX_WP18      0x047E
-#define DEVID_COMPEX_NP18A     0x0489
-
-/* Other devices */
-#define DEVID_COMPEX_NP26G8M   0x03E8
-#define DEVID_COMPEX_NP26G16M  0x03E9
-
-struct mylo_fw_header {
-       uint32_t        magic;  /* must be MYLO_MAGIC_FIRMWARE */
-       uint32_t        crc;    /* CRC of the whole firmware */
-       uint32_t        res0;   /* unknown/unused */
-       uint32_t        res1;   /* unknown/unused */
-       uint16_t        vid;    /* vendor ID */
-       uint16_t        did;    /* device ID */
-       uint16_t        svid;   /* sub vendor ID */
-       uint16_t        sdid;   /* sub device ID */
-       uint32_t        rev;    /* device revision */
-       uint32_t        fwhi;   /* FIXME: firmware version high? */
-       uint32_t        fwlo;   /* FIXME: firmware version low? */
-       uint32_t        flags;  /* firmware flags */
-};
-
-#define FW_FLAG_BOARD_PARAMS_WP        0x01 /* board parameters are write protected */
-#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
-
-struct mylo_fw_blockdesc {
-       uint32_t        type;   /* block type */
-       uint32_t        addr;   /* relative address to flash start */
-       uint32_t        dlen;   /* size of block data in bytes */
-       uint32_t        blen;   /* total size of block in bytes */
-};
-
-#define FW_DESC_TYPE_UNUSED    0
-#define FW_DESC_TYPE_USED      1
-
-struct mylo_partition {
-       uint16_t        flags;  /* partition flags */
-       uint16_t        type;   /* type of the partition */
-       uint32_t        addr;   /* relative address of the partition from the
-                                  flash start */
-       uint32_t        size;   /* size of the partition in bytes */
-       uint32_t        param;  /* if this is the active partition, the
-                                  MyLoader load code to this address */
-};
-
-#define PARTITION_FLAG_ACTIVE  0x8000 /* this is the active partition,
-                                       * MyLoader loads firmware from here */
-#define PARTITION_FLAG_ISRAM   0x2000 /* FIXME: this is a RAM partition? */
-#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
-#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
-                                       * before decompression */
-#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
-
-#define PARTITION_TYPE_FREE    0
-#define PARTITION_TYPE_USED    1
-
-#define MYLO_MAX_PARTITIONS    8       /* maximum number of partitions in the
-                                          partition table */
-
-struct mylo_partition_table {
-       uint32_t        magic;  /* must be MYLO_MAGIC_PARTITIONS */
-       uint32_t        res0;   /* unknown/unused */
-       uint32_t        res1;   /* unknown/unused */
-       uint32_t        res2;   /* unknown/unused */
-       struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
-};
-
-struct mylo_partition_header {
-       uint32_t        len;    /* length of the partition data */
-       uint32_t        crc;    /* CRC value of the partition data */
-};
-
-struct mylo_system_params {
-       uint32_t        magic;  /* must be MYLO_MAGIC_SYS_PARAMS */
-       uint32_t        res0;
-       uint32_t        res1;
-       uint32_t        mylo_ver;
-       uint16_t        vid;    /* Vendor ID */
-       uint16_t        did;    /* Device ID */
-       uint16_t        svid;   /* Sub Vendor ID */
-       uint16_t        sdid;   /* Sub Device ID */
-       uint32_t        rev;    /* device revision */
-       uint32_t        fwhi;
-       uint32_t        fwlo;
-       uint32_t        tftp_addr;
-       uint32_t        prog_start;
-       uint32_t        flash_size;     /* Size of boot FLASH in bytes */
-       uint32_t        dram_size;      /* Size of onboard RAM in bytes */
-};
-
-
-struct mylo_eth_addr {
-       uint8_t mac[6];
-       uint8_t csum[2];
-};
-
-#define MYLO_ETHADDR_COUNT     8       /* maximum number of ethernet address
-                                          in the board parameters */
-
-struct mylo_board_params {
-       uint32_t        magic;  /* must be MYLO_MAGIC_BOARD_PARAMS */
-       uint32_t        res0;
-       uint32_t        res1;
-       uint32_t        res2;
-       struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
-};
-
-struct myloader_info {
-       u32     vid;
-       u32     did;
-       u32     svid;
-       u32     sdid;
-       uint8_t macs[MYLO_ETHADDR_COUNT][6];
-};
-
-extern struct myloader_info myloader_info;
-extern int myloader_present(void) __init;
-
-#endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
deleted file mode 100644 (file)
index 91ac05a..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Mikrotik's RouterBOOT definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_ROUTERBOOT_H_
-#define _PROM_ROUTERBOOT_H_
-
-struct rb_bios_settings {
-       u32     hs_offs; /* hard settings offset */
-       u32     hs_size; /* hard settings size */
-       u32     fw_offs; /* firmware offset */
-       u32     ss_offs; /* soft settings offset */
-       u32     ss_size; /* soft settings size */
-};
-
-struct rb_hard_settings {
-       char    *name;          /* board name */
-       char    *bios_ver;      /* BIOS version */
-       u32     mem_size;       /* memory size in bytes */
-       u32     mac_count;      /* number of mac addresses */
-       u8      *mac_base;      /* mac address base */
-};
-
-extern int routerboot_present(void) __init;
-extern char *routerboot_get_boardname(void);
-
-extern struct rb_hard_settings rb_hs;
-
-#endif /* _PROM_ROUTERBOOT_H_ */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/prom/zynos.h
deleted file mode 100644 (file)
index d1e3e5b..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  ZyNOS (ZyXEL's Networking OS) definitions
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ZYNOS_H
-#define _ZYNOS_H
-
-#define ZYNOS_NAME_LEN         32
-#define ZYNOS_FEAT_BYTES       22
-#define ZYNOS_MAC_LEN          6
-
-struct zynos_board_info {
-       unsigned char   vendor[ZYNOS_NAME_LEN];
-       unsigned char   product[ZYNOS_NAME_LEN];
-       u32             bootext_addr;
-       u32             res0;
-       u16             board_id;
-       u8              res1[6];
-       u8              feat_other[ZYNOS_FEAT_BYTES];
-       u8              feat_main;
-       u8              res2;
-       u8              mac[ZYNOS_MAC_LEN];
-       u8              country;
-       u8              dbgflag;
-} __attribute__ ((packed));
-
-/*
- * Vendor IDs
- */
-#define ZYNOS_VENDOR_ID_ZYXEL  0
-#define ZYNOS_VENDOR_ID_NETGEAR        1
-#define ZYNOS_VENDOR_ID_DLINK  2
-#define ZYNOS_VENDOR_ID_OTHER  3
-#define ZYNOS_VENDOR_ID_LUCENT 4
-
-/*
- * Vendor names
- */
-#define ZYNOS_VENDOR_DLINK     "D-Link"
-#define ZYNOS_VENDOR_LUCENT    "LUCENT"
-#define ZYNOS_VENDOR_NETGEAR   "NetGear"
-#define ZYNOS_VENDOR_ZYXEL     "ZyXEL"
-
-/*
- * Board IDs (big-endian)
- */
-#define ZYNOS_BOARD_ES2108     0x00F2  /* Ethernet Switch 2108 */
-#define ZYNOS_BOARD_ES2108F    0x01AF  /* Ethernet Switch 2108-F */
-#define ZYNOS_BOARD_ES2108G    0x00F3  /* Ethernet Switch 2108-G */
-#define ZYNOS_BOARD_ES2108LC   0x00FC  /* Ethernet Switch 2108-LC */
-#define ZYNOS_BOARD_ES2108PWR  0x00F4  /* Ethernet Switch 2108PWR */
-#define ZYNOS_BOARD_HS100      0x9FF1  /* HomeSafe 100/100W */
-#define ZYNOS_BOARD_P334       0x9FF5  /* Prestige 334 */
-#define ZYNOS_BOARD_P334U      0x9FDD  /* Prestige 334U */
-#define ZYNOS_BOARD_P334W      0x9FF3  /* Prestige 334W */
-#define ZYNOS_BOARD_P334WH     0x00E0  /* Prestige 334WH */
-#define ZYNOS_BOARD_P334WHD    0x00E1  /* Prestige 334WHD */
-#define ZYNOS_BOARD_P334WT     0x9FEF  /* Prestige 334WT */
-#define ZYNOS_BOARD_P334WT_ALT 0x9F02  /* Prestige 334WT alternative*/
-#define ZYNOS_BOARD_P335       0x9FED  /* Prestige 335/335WT */
-#define ZYNOS_BOARD_P335PLUS   0x0025  /* Prestige 335Plus */
-#define ZYNOS_BOARD_P335U      0x9FDC  /* Prestige 335U */
-
-/*
- * Some magic numbers (big-endian)
- */
-#define ZYNOS_MAGIC_DBGAREA1   0x48646267      /* "Hdbg" */
-#define ZYNOS_MAGIC_DBGAREA2   0x61726561      /* "area" */
-
-struct bootbase_info {
-       u16             vendor_id;
-       u16             board_id;
-       u8              mac[6];
-};
-
-extern struct bootbase_info bootbase_info;
-extern int bootbase_present(void) __init;
-
-#endif /* _ZYNOS_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/war.h b/target/linux/adm5120/files-3.8/arch/mips/include/asm/mach-adm5120/war.h
deleted file mode 100644 (file)
index 87c35f3..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H
-#define __ASM_MIPS_MACH_ADM5120_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR    0
-#define R4600_V1_HIT_CACHEOP_WAR       0
-#define R4600_V2_HIT_CACHEOP_WAR       0
-#define R5432_CP0_INTERRUPT_WAR                0
-#define BCM1250_M3_WAR                 0
-#define SIBYTE_1956_WAR                        0
-#define MIPS4K_ICACHE_REFILL_WAR       0
-#define MIPS_CACHE_SYNC_WAR            0
-#define TX49XX_ICACHE_INDEX_INV_WAR    0
-#define RM9000_CDEX_SMP_WAR            0
-#define ICACHE_REFILLS_WORKAROUND_WAR  0
-#define R10000_LLSC_WAR                        0
-#define MIPS34K_MISSED_ITLB_WAR                0
-
-#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */
diff --git a/target/linux/adm5120/files-3.8/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files-3.8/arch/mips/pci/pci-adm5120.c
deleted file mode 100644 (file)
index f8d3598..0000000
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- *  ADM5120 PCI Host Controller driver
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices
- *     Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/pci_regs.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(f, a...)   printk(KERN_DEBUG f, ## a)
-#else
-#define DBG(f, a...)   do {} while (0)
-#endif
-
-#define PCI_ENABLE 0x80000000
-
-/* -------------------------------------------------------------------------*/
-
-static unsigned int adm5120_pci_nr_irqs __initdata;
-static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata;
-
-static DEFINE_SPINLOCK(pci_lock);
-
-/* -------------------------------------------------------------------------*/
-
-static inline void write_cfgaddr(u32 addr)
-{
-       __raw_writel((addr | PCI_ENABLE),
-               (void __iomem *)(KSEG1ADDR(ADM5120_PCICFG_ADDR)));
-}
-
-static inline void write_cfgdata(u32 data)
-{
-       __raw_writel(data, (void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 read_cfgdata(void)
-{
-       return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where)
-{
-       return ((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
-               (where & 0xFC);
-}
-
-/* -------------------------------------------------------------------------*/
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
-               int size, u32 *val)
-{
-       unsigned long flags;
-       u32 data;
-
-       spin_lock_irqsave(&pci_lock, flags);
-
-       write_cfgaddr(mkaddr(bus, devfn, where));
-       data = read_cfgdata();
-
-       DBG("PCI: cfg_read  %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
-               bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
-               where, size, data);
-
-       switch (size) {
-       case 1:
-               if (where & 1)
-                       data >>= 8;
-               if (where & 2)
-                       data >>= 16;
-               data &= 0xFF;
-               break;
-       case 2:
-               if (where & 2)
-                       data >>= 16;
-               data &= 0xFFFF;
-               break;
-       }
-
-       *val = data;
-       DBG(", 0x%08X returned\n", data);
-
-       spin_unlock_irqrestore(&pci_lock, flags);
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
-               int size, u32 val)
-{
-       unsigned long flags;
-       u32 data;
-       int s;
-
-       spin_lock_irqsave(&pci_lock, flags);
-
-       write_cfgaddr(mkaddr(bus, devfn, where));
-       data = read_cfgdata();
-
-       DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
-               bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
-               where, size, data);
-
-       switch (size) {
-       case 1:
-               s = ((where & 3) << 3);
-               data &= ~(0xFF << s);
-               data |= ((val & 0xFF) << s);
-               break;
-       case 2:
-               s = ((where & 2) << 4);
-               data &= ~(0xFFFF << s);
-               data |= ((val & 0xFFFF) << s);
-               break;
-       case 4:
-               data = val;
-               break;
-       }
-
-       write_cfgdata(data);
-       DBG(", 0x%08X written\n", data);
-
-       spin_unlock_irqrestore(&pci_lock, flags);
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops adm5120_pci_ops = {
-       .read   = pci_config_read,
-       .write  = pci_config_write,
-};
-
-/* -------------------------------------------------------------------------*/
-
-static void adm5120_pci_fixup(struct pci_dev *dev)
-{
-       if (dev->devfn != 0)
-               return;
-
-       /* setup COMMAND register */
-       pci_write_config_word(dev, PCI_COMMAND,
-               (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
-
-       /* setup CACHE_LINE_SIZE register */
-       pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
-
-       /* setup BARS */
-       pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
-       pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120,
-       adm5120_pci_fixup);
-
-/* -------------------------------------------------------------------------*/
-
-void __init adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map)
-{
-       adm5120_pci_nr_irqs = nr_irqs;
-       adm5120_pci_irq_map = map;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-       int irq = -1;
-       int i;
-
-       if ((!adm5120_pci_nr_irqs) || (!adm5120_pci_irq_map)) {
-               printk(KERN_ALERT "PCI: pci_irq_map is not initialized\n");
-               goto out;
-       }
-
-       if (slot < 1 || slot > 4) {
-               printk(KERN_ALERT "PCI: slot number %u is not supported\n",
-                       slot);
-               goto out;
-       }
-
-       for (i = 0; i < adm5120_pci_nr_irqs; i++) {
-               if ((adm5120_pci_irq_map[i].slot == slot)
-                       && (adm5120_pci_irq_map[i].func == PCI_FUNC(dev->devfn))
-                       && (adm5120_pci_irq_map[i].pin == pin)) {
-                       irq = adm5120_pci_irq_map[i].irq;
-                       break;
-               }
-       }
-
-       if (irq < 0) {
-               printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
-                       pci_name((struct pci_dev *)dev), pin);
-       } else {
-               printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
-                       pci_name((struct pci_dev *)dev), pin, irq);
-       }
-
-out:
-       return irq;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-       return 0;
-}
-
-/* -------------------------------------------------------------------------*/
-
-static struct resource pci_io_resource = {
-       .name   = "ADM5120 PCI I/O",
-       .start  = ADM5120_PCIIO_BASE,
-       .end    = ADM5120_PCICFG_ADDR-1,
-       .flags  = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-       .name   = "ADM5120 PCI MEM",
-       .start  = ADM5120_PCIMEM_BASE,
-       .end    = ADM5120_PCIIO_BASE-1,
-       .flags  = IORESOURCE_MEM
-};
-
-static struct pci_controller adm5120_controller = {
-       .pci_ops        = &adm5120_pci_ops,
-       .io_resource    = &pci_io_resource,
-       .mem_resource   = &pci_mem_resource,
-};
-
-static int __init adm5120_pci_setup(void)
-{
-       if (adm5120_package_pqfp()) {
-               printk(KERN_INFO "PCI: not available on ADM5120P\n");
-               return -1;
-       }
-
-       /* Avoid ISA compat ranges.  */
-       PCIBIOS_MIN_IO = 0x00000000;
-       PCIBIOS_MIN_MEM = 0x00000000;
-
-       /* Set I/O resource limits.  */
-       ioport_resource.end = 0x1fffffff;
-       iomem_resource.end = 0xffffffff;
-
-       register_pci_controller(&adm5120_controller);
-       return 0;
-}
-
-arch_initcall(adm5120_pci_setup);
diff --git a/target/linux/adm5120/files-3.8/drivers/ata/pata_rb153_cf.c b/target/linux/adm5120/files-3.8/drivers/ata/pata_rb153_cf.c
deleted file mode 100644 (file)
index 92a4d13..0000000
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *  A low-level PATA driver to handle a Compact Flash connected on the
- *  Mikrotik's RouterBoard 153 board.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was based on: drivers/ata/pata_ixp4xx_cf.c
- *     Copyright (C) 2006-07 Tower Technologies
- *     Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- *  Also was based on the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
- *  seems not to have a license.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/libata.h>
-#include <scsi/scsi_host.h>
-
-#define DRV_NAME       "pata-rb153-cf"
-#define DRV_VERSION    "0.5.0"
-#define DRV_DESC       "PATA driver for RouterBOARD 153 Compact Flash"
-
-#define RB153_CF_MAXPORTS      1
-#define RB153_CF_IO_DELAY      100
-
-#define RB153_CF_REG_CMD       0x0800
-#define RB153_CF_REG_CTRL      0x080E
-#define RB153_CF_REG_DATA      0x0C00
-
-struct rb153_cf_info {
-       void __iomem    *iobase;
-       unsigned int    gpio_line;
-       int             frozen;
-       unsigned int    irq;
-};
-
-static inline void rb153_pata_finish_io(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       /* FIXME: Keep previous delay. If this is merely a fence then
-        * ata_sff_sync might be sufficient. */
-       ata_sff_dma_pause(ap);
-       ndelay(RB153_CF_IO_DELAY);
-
-       irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-}
-
-static void rb153_pata_exec_command(struct ata_port *ap,
-                                       const struct ata_taskfile *tf)
-{
-       writeb(tf->command, ap->ioaddr.command_addr);
-       rb153_pata_finish_io(ap);
-}
-
-static unsigned int rb153_pata_data_xfer(struct ata_device *adev,
-                                       unsigned char *buf,
-                                       unsigned int buflen,
-                                       int write_data)
-{
-       void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr;
-       unsigned int t;
-
-       t = buflen;
-       if (write_data) {
-               for (; t > 0; t--, buf++)
-                       writeb(*buf, ioaddr);
-       } else {
-               for (; t > 0; t--, buf++)
-                       *buf = readb(ioaddr);
-       }
-
-       rb153_pata_finish_io(adev->link->ap);
-       return buflen;
-}
-
-static void rb153_pata_freeze(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       info->frozen = 1;
-}
-
-static void rb153_pata_thaw(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       info->frozen = 0;
-}
-
-static irqreturn_t rb153_pata_irq_handler(int irq, void *dev_instance)
-{
-       struct ata_host *ah = dev_instance;
-       struct rb153_cf_info *info = ah->private_data;
-
-       if (gpio_get_value(info->gpio_line)) {
-               irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
-               if (!info->frozen)
-                       ata_sff_interrupt(irq, dev_instance);
-       } else {
-               irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-       }
-
-       return IRQ_HANDLED;
-}
-
-static struct ata_port_operations rb153_pata_port_ops = {
-       .inherits               = &ata_sff_port_ops,
-       .sff_exec_command       = rb153_pata_exec_command,
-       .sff_data_xfer          = rb153_pata_data_xfer,
-       .freeze                 = rb153_pata_freeze,
-       .thaw                   = rb153_pata_thaw,
-};
-
-static struct scsi_host_template rb153_pata_sht = {
-       ATA_PIO_SHT(DRV_NAME),
-};
-
-static void rb153_pata_setup_port(struct ata_host *ah)
-{
-       struct rb153_cf_info *info = ah->private_data;
-       struct ata_port *ap;
-
-       ap = ah->ports[0];
-
-       ap->ops         = &rb153_pata_port_ops;
-       ap->pio_mask    = 0x1f; /* PIO4 */
-
-       ap->ioaddr.cmd_addr     = info->iobase + RB153_CF_REG_CMD;
-       ap->ioaddr.ctl_addr     = info->iobase + RB153_CF_REG_CTRL;
-       ap->ioaddr.altstatus_addr = info->iobase + RB153_CF_REG_CTRL;
-
-       ata_sff_std_ports(&ap->ioaddr);
-
-       ap->ioaddr.data_addr = info->iobase + RB153_CF_REG_DATA;
-}
-
-static int rb153_pata_driver_probe(struct platform_device *pdev)
-{
-       unsigned int irq;
-       int gpio;
-       struct resource *res;
-       struct ata_host *ah;
-       struct rb153_cf_info *info;
-       int ret;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(&pdev->dev, "no IOMEM resource found\n");
-               return -EINVAL;
-       }
-
-       irq = platform_get_irq(pdev, 0);
-       if (irq <= 0) {
-               dev_err(&pdev->dev, "no IRQ resource found\n");
-               return -ENOENT;
-       }
-
-       gpio = irq_to_gpio(irq);
-       if (gpio < 0) {
-               dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
-               return -ENOENT;
-       }
-
-       ret = gpio_request(gpio, DRV_NAME);
-       if (ret) {
-               dev_err(&pdev->dev, "GPIO request failed\n");
-               return ret;
-       }
-
-       ah = ata_host_alloc(&pdev->dev, RB153_CF_MAXPORTS);
-       if (!ah)
-               return -ENOMEM;
-
-       platform_set_drvdata(pdev, ah);
-
-       info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-       if (!info)
-               return -ENOMEM;
-
-       ah->private_data = info;
-       info->gpio_line = gpio;
-       info->irq = irq;
-
-       info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
-                               res->end - res->start + 1);
-       if (!info->iobase)
-               return -ENOMEM;
-
-       ret = gpio_direction_input(gpio);
-       if (ret) {
-               dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
-                               ret);
-               goto err_free_gpio;
-       }
-
-       rb153_pata_setup_port(ah);
-
-       ret = ata_host_activate(ah, irq, rb153_pata_irq_handler,
-                               IRQF_TRIGGER_LOW, &rb153_pata_sht);
-       if (ret)
-               goto err_free_gpio;
-
-       return 0;
-
-err_free_gpio:
-       gpio_free(gpio);
-
-       return ret;
-}
-
-static int rb153_pata_driver_remove(struct platform_device *pdev)
-{
-       struct ata_host *ah = platform_get_drvdata(pdev);
-       struct rb153_cf_info *info = ah->private_data;
-
-       ata_host_detach(ah);
-       gpio_free(info->gpio_line);
-
-       return 0;
-}
-
-static struct platform_driver rb153_pata_platform_driver = {
-       .probe          = rb153_pata_driver_probe,
-       .remove         = rb153_pata_driver_remove,
-       .driver  = {
-               .name   = DRV_NAME,
-               .owner  = THIS_MODULE,
-       },
-};
-
-/* ------------------------------------------------------------------------ */
-
-#define DRV_INFO DRV_DESC " version " DRV_VERSION
-
-static int __init rb153_pata_module_init(void)
-{
-       printk(KERN_INFO DRV_INFO "\n");
-
-       return platform_driver_register(&rb153_pata_platform_driver);
-}
-
-static void __exit rb153_pata_module_exit(void)
-{
-       platform_driver_unregister(&rb153_pata_platform_driver);
-}
-
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL v2");
-
-module_init(rb153_pata_module_init);
-module_exit(rb153_pata_module_exit);
diff --git a/target/linux/adm5120/files-3.8/drivers/leds/ledtrig-adm5120-switch.c b/target/linux/adm5120/files-3.8/drivers/leds/ledtrig-adm5120-switch.c
deleted file mode 100644 (file)
index 23a54a0..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * LED ADM5120 Switch Port State Trigger
- *
- * Copyright (C) 2007 Bernhard Held <bernhard at bernhardheld.de>
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on: drivers/leds/ledtrig-timer.c
- *     Copyright 2005-2006 Openedhand Ltd.
- *     Author: Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <linux/gpio.h>
-
-#include "leds.h"
-
-#define DRV_NAME "port_state"
-#define DRV_DESC "LED ADM5120 Switch Port State Trigger"
-
-struct port_state {
-       char *name;
-       unsigned int value;
-};
-
-#define PORT_STATE(n, v) {.name = (n), .value = (v)}
-
-static struct port_state port_states[] = {
-       PORT_STATE("off",               LED_OFF),
-       PORT_STATE("on",                LED_FULL),
-       PORT_STATE("flash",             ADM5120_GPIO_FLASH),
-       PORT_STATE("link",              ADM5120_GPIO_LINK),
-       PORT_STATE("speed",             ADM5120_GPIO_SPEED),
-       PORT_STATE("duplex",            ADM5120_GPIO_DUPLEX),
-       PORT_STATE("act",               ADM5120_GPIO_ACT),
-       PORT_STATE("coll",              ADM5120_GPIO_COLL),
-       PORT_STATE("link_act",          ADM5120_GPIO_LINK_ACT),
-       PORT_STATE("duplex_coll",       ADM5120_GPIO_DUPLEX_COLL),
-       PORT_STATE("10M_act",           ADM5120_GPIO_10M_ACT),
-       PORT_STATE("100M_act",          ADM5120_GPIO_100M_ACT),
-};
-
-static ssize_t led_port_state_show(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct led_classdev *led_cdev = dev_get_drvdata(dev);
-       struct port_state *state = led_cdev->trigger_data;
-       int len = 0;
-       int i;
-
-       *buf = '\0';
-       for (i = 0; i < ARRAY_SIZE(port_states); i++) {
-               if (&port_states[i] == state)
-                       len += sprintf(buf+len, "[%s] ", port_states[i].name);
-               else
-                       len += sprintf(buf+len, "%s ", port_states[i].name);
-       }
-       len += sprintf(buf+len, "\n");
-
-       return len;
-}
-
-static ssize_t led_port_state_store(struct device *dev,
-               struct device_attribute *attr, const char *buf, size_t size)
-{
-       struct led_classdev *led_cdev = dev_get_drvdata(dev);
-       size_t len;
-       int i;
-
-       for (i = 0; i < ARRAY_SIZE(port_states); i++) {
-               len = strlen(port_states[i].name);
-               if (strncmp(port_states[i].name, buf, len) != 0)
-                       continue;
-
-               if (buf[len] != '\0' && buf[len] != '\n')
-                       continue;
-
-               led_cdev->trigger_data = &port_states[i];
-               led_set_brightness(led_cdev, port_states[i].value);
-               return size;
-       }
-
-       return -EINVAL;
-}
-
-static DEVICE_ATTR(port_state, 0644, led_port_state_show,
-                        led_port_state_store);
-
-static void adm5120_switch_trig_activate(struct led_classdev *led_cdev)
-{
-       struct port_state *state = port_states;
-       int rc;
-
-       led_cdev->trigger_data = state;
-
-       rc = device_create_file(led_cdev->dev, &dev_attr_port_state);
-       if (rc)
-               goto err;
-
-       led_set_brightness(led_cdev, state->value);
-
-       return;
-err:
-       led_cdev->trigger_data = NULL;
-}
-
-static void adm5120_switch_trig_deactivate(struct led_classdev *led_cdev)
-{
-       struct port_state *state = led_cdev->trigger_data;
-
-       if (!state)
-               return;
-
-       device_remove_file(led_cdev->dev, &dev_attr_port_state);
-
-}
-
-static struct led_trigger adm5120_switch_led_trigger = {
-       .name           = DRV_NAME,
-       .activate       = adm5120_switch_trig_activate,
-       .deactivate     = adm5120_switch_trig_deactivate,
-};
-
-static int __init adm5120_switch_trig_init(void)
-{
-       led_trigger_register(&adm5120_switch_led_trigger);
-       return 0;
-}
-
-static void __exit adm5120_switch_trig_exit(void)
-{
-       led_trigger_unregister(&adm5120_switch_led_trigger);
-}
-
-module_init(adm5120_switch_trig_init);
-module_exit(adm5120_switch_trig_exit);
-
-MODULE_AUTHOR("Bernhard Held <bernhard at bernhardheld.de>, "
-               "Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files-3.8/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files-3.8/drivers/mtd/maps/adm5120-flash.c
deleted file mode 100644 (file)
index f6a86f4..0000000
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- *  Platform driver for NOR flash devices on ADM5120 based boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was derived from: drivers/mtd/map/physmap.c
- *     Copyright (C) 2003 MontaVista Software Inc.
- *     Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_mpmc.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#define DRV_NAME       "adm5120-flash"
-#define DRV_DESC       "ADM5120 flash MAP driver"
-#define MAX_PARSED_PARTS 8
-
-#ifdef ADM5120_FLASH_DEBUG
-#define MAP_DBG(m, f, a...)    printk(KERN_INFO "%s: " f, (m->name) , ## a)
-#else
-#define MAP_DBG(m, f, a...)    do {} while (0)
-#endif
-#define MAP_ERR(m, f, a...)    printk(KERN_ERR "%s: " f, (m->name) , ## a)
-#define MAP_INFO(m, f, a...)   printk(KERN_INFO "%s: " f, (m->name) , ## a)
-
-struct adm5120_map_info {
-       struct map_info map;
-       void            (*switch_bank)(unsigned);
-       unsigned long   window_size;
-};
-
-struct adm5120_flash_info {
-       struct mtd_info         *mtd;
-       struct resource         *res;
-       struct platform_device  *dev;
-       struct adm5120_map_info amap;
-};
-
-struct flash_desc {
-       u32     phys;
-       u32     srs_shift;
-};
-
-/*
- * Globals
- */
-static DEFINE_SPINLOCK(adm5120_flash_spin);
-#define FLASH_LOCK()   spin_lock(&adm5120_flash_spin)
-#define FLASH_UNLOCK() spin_unlock(&adm5120_flash_spin)
-
-static u32 flash_bankwidths[4] = { 1, 2, 4, 0 };
-
-static u32 flash_sizes[8] = {
-       0, 512*1024, 1024*1024, 2*1024*1024,
-       4*1024*1024, 0, 0, 0
-};
-
-static struct flash_desc flash_descs[2] = {
-       {
-               .phys           = ADM5120_SRAM0_BASE,
-               .srs_shift      = MEMCTRL_SRS0_SHIFT,
-       }, {
-               .phys           = ADM5120_SRAM1_BASE,
-               .srs_shift      = MEMCTRL_SRS1_SHIFT,
-       }
-};
-
-static const char const *probe_types[] = {
-       "cfi_probe",
-       "jedec_probe",
-       "map_rom",
-       NULL
-};
-
-static const char const *parse_types[] = {
-       "cmdlinepart",
-#ifdef CONFIG_MTD_REDBOOT_PARTS
-       "RedBoot",
-#endif
-#ifdef CONFIG_MTD_MYLOADER_PARTS
-       "MyLoader",
-#endif
-       NULL,
-};
-
-#define BANK_SIZE      (2<<20)
-#define BANK_SIZE_MAX  (4<<20)
-#define BANK_OFFS_MASK (BANK_SIZE-1)
-#define BANK_START_MASK        (~BANK_OFFS_MASK)
-
-static inline struct adm5120_map_info *map_to_amap(struct map_info *map)
-{
-       return (struct adm5120_map_info *)map;
-}
-
-static void adm5120_flash_switchbank(struct map_info *map,
-               unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       unsigned bank;
-
-       if (amap->switch_bank == NULL)
-               return;
-
-       bank = (ofs & BANK_START_MASK) >> 21;
-       if (bank > 1)
-               BUG();
-
-       MAP_DBG(map, "switching to bank %u, ofs=%lX\n", bank, ofs);
-       amap->switch_bank(bank);
-}
-
-static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       map_word ret;
-
-       MAP_DBG(map, "reading from ofs %lX\n", ofs);
-
-       if (ofs >= amap->window_size)
-               return map_word_ff(map);
-
-       FLASH_LOCK();
-       adm5120_flash_switchbank(map, ofs);
-       ret = inline_map_read(map, (ofs & (amap->window_size-1)));
-       FLASH_UNLOCK();
-
-       return ret;
-}
-
-static void adm5120_flash_write(struct map_info *map, const map_word datum,
-               unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-
-       MAP_DBG(map, "writing to ofs %lX\n", ofs);
-
-       if (ofs > amap->window_size)
-               return;
-
-       FLASH_LOCK();
-       adm5120_flash_switchbank(map, ofs);
-       inline_map_write(map, datum, (ofs & (amap->window_size-1)));
-       FLASH_UNLOCK();
-}
-
-static void adm5120_flash_copy_from(struct map_info *map, void *to,
-               unsigned long from, ssize_t len)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       char *p;
-       ssize_t t;
-
-       MAP_DBG(map, "copy_from, to=%lX, from=%lX, len=%lX\n",
-               (unsigned long)to, from, (unsigned long)len);
-
-       if (from > amap->window_size)
-               return;
-
-       p = (char *)to;
-       while (len > 0) {
-               t = len;
-               if ((from < BANK_SIZE) && ((from+len) > BANK_SIZE))
-                       t = BANK_SIZE-from;
-
-               FLASH_LOCK();
-               MAP_DBG(map, "copying %lu byte(s) from %lX to %lX\n",
-                       (unsigned long)t, (from & (amap->window_size-1)),
-                       (unsigned long)p);
-               adm5120_flash_switchbank(map, from);
-               inline_map_copy_from(map, p, (from & (amap->window_size-1)), t);
-               FLASH_UNLOCK();
-               p += t;
-               from += t;
-               len -= t;
-       }
-}
-
-static int adm5120_flash_initres(struct adm5120_flash_info *info)
-{
-       struct map_info *map = &info->amap.map;
-       int err = 0;
-
-       info->res = request_mem_region(map->phys, info->amap.window_size,
-                       map->name);
-       if (info->res == NULL) {
-               MAP_ERR(map, "could not reserve memory region\n");
-               err = -ENOMEM;
-               goto out;
-       }
-
-       map->virt = ioremap_nocache(map->phys, info->amap.window_size);
-       if (map->virt == NULL) {
-               MAP_ERR(map, "failed to ioremap flash region\n");
-               err = -ENOMEM;
-               goto out;
-       }
-
-out:
-       return err;
-}
-
-static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
-               struct platform_device *dev)
-{
-       struct map_info *map = &info->amap.map;
-       struct adm5120_flash_platform_data *pdata = dev->dev.platform_data;
-       struct flash_desc *fdesc;
-       u32 t = 0;
-
-       map->name = dev_name(&dev->dev);
-
-       if (dev->id > 1) {
-               MAP_ERR(map, "invalid flash id\n");
-               goto err_out;
-       }
-
-       fdesc = &flash_descs[dev->id];
-
-       if (pdata)
-               info->amap.window_size = pdata->window_size;
-
-       if (info->amap.window_size == 0) {
-               /* get memory window size */
-               t = SW_READ_REG(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift;
-               t &= MEMCTRL_SRS_MASK;
-               info->amap.window_size = flash_sizes[t];
-       }
-
-       if (info->amap.window_size == 0) {
-               MAP_ERR(map, "unable to determine window size\n");
-               goto err_out;
-       }
-
-       /* get flash bus width */
-       switch (dev->id) {
-       case 0:
-               t = MPMC_READ_REG(SC1) & SC_MW_MASK;
-               break;
-       case 1:
-               t = MPMC_READ_REG(SC0) & SC_MW_MASK;
-               break;
-       }
-       map->bankwidth = flash_bankwidths[t];
-       if (map->bankwidth == 0) {
-               MAP_ERR(map, "invalid bus width detected\n");
-               goto err_out;
-       }
-
-       map->phys = fdesc->phys;
-       map->size = BANK_SIZE_MAX;
-
-       simple_map_init(map);
-       map->read = adm5120_flash_read;
-       map->write = adm5120_flash_write;
-       map->copy_from = adm5120_flash_copy_from;
-
-       if (pdata) {
-               map->set_vpp = pdata->set_vpp;
-               info->amap.switch_bank = pdata->switch_bank;
-       }
-
-       info->dev = dev;
-
-       MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n",
-               (unsigned long)map->phys,
-               (unsigned long)info->amap.window_size >> 10,
-               map->bankwidth*8);
-
-       return 0;
-
-err_out:
-       return -ENODEV;
-}
-
-static void adm5120_flash_initbanks(struct adm5120_flash_info *info)
-{
-       struct map_info *map = &info->amap.map;
-
-       if (info->mtd->size <= BANK_SIZE)
-               /* no bank switching needed */
-               return;
-
-       if (info->amap.switch_bank) {
-               info->amap.window_size = info->mtd->size;
-               return;
-       }
-
-       MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n",
-               (unsigned long)map->size >> 10,
-               (unsigned long)info->mtd->size >> 10);
-
-       info->mtd->size = info->amap.window_size;
-}
-
-static int adm5120_flash_remove(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info;
-
-       info = platform_get_drvdata(dev);
-       if (info == NULL)
-               return 0;
-
-       platform_set_drvdata(dev, NULL);
-
-       if (info->mtd != NULL) {
-               mtd_device_unregister(info->mtd);
-               map_destroy(info->mtd);
-       }
-
-       if (info->amap.map.virt != NULL)
-               iounmap(info->amap.map.virt);
-
-       if (info->res != NULL) {
-               release_resource(info->res);
-               kfree(info->res);
-       }
-
-       return 0;
-}
-
-static int adm5120_flash_probe(struct platform_device *dev)
-{
-       struct adm5120_flash_platform_data *pdata;
-       struct adm5120_flash_info *info;
-       struct map_info *map;
-       const char **probe_type;
-       int err;
-
-       pdata = dev->dev.platform_data;
-       if (!pdata) {
-               dev_err(&dev->dev, "no platform data\n");
-               return -EINVAL;
-       }
-
-       info = kzalloc(sizeof(*info), GFP_KERNEL);
-       if (info == NULL) {
-               err = -ENOMEM;
-               goto err_out;
-       }
-
-       platform_set_drvdata(dev, info);
-
-       err = adm5120_flash_initinfo(info, dev);
-       if (err)
-               goto err_out;
-
-       err = adm5120_flash_initres(info);
-       if (err)
-               goto err_out;
-
-       map = &info->amap.map;
-       for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL;
-               probe_type++)
-               info->mtd = do_map_probe(*probe_type, map);
-
-       if (info->mtd == NULL) {
-               MAP_ERR(map, "map_probe failed\n");
-               err = -ENXIO;
-               goto err_out;
-       }
-
-       adm5120_flash_initbanks(info);
-
-       if (info->mtd->size < info->amap.window_size) {
-               /* readjust resources */
-               iounmap(map->virt);
-               release_resource(info->res);
-               kfree(info->res);
-
-               info->amap.window_size = info->mtd->size;
-               map->size = info->mtd->size;
-               MAP_INFO(map, "reducing map size to %ldKiB\n",
-                       (unsigned long)map->size >> 10);
-               err = adm5120_flash_initres(info);
-               if (err)
-                       goto err_out;
-       }
-
-       MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n",
-               (unsigned long)map->phys, (unsigned long)info->mtd->size >> 10,
-               map->bankwidth*8);
-
-       info->mtd->owner = THIS_MODULE;
-
-       err = mtd_device_parse_register(info->mtd, parse_types, 0,
-                                       pdata->parts, pdata->nr_parts);
-       if (err)
-               goto err_out;
-
-       return 0;
-
-err_out:
-       adm5120_flash_remove(dev);
-       return err;
-}
-
-#ifdef CONFIG_PM
-static int adm5120_flash_suspend(struct platform_device *dev,
-               pm_message_t state)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-       int ret = 0;
-
-       if (info)
-               ret = info->mtd->suspend(info->mtd);
-
-       return ret;
-}
-
-static int adm5120_flash_resume(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-
-       if (info)
-               info->mtd->resume(info->mtd);
-
-       return 0;
-}
-
-static void adm5120_flash_shutdown(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-
-       if (info && info->mtd->suspend(info->mtd) == 0)
-               info->mtd->resume(info->mtd);
-}
-#endif
-
-static struct platform_driver adm5120_flash_driver = {
-       .probe          = adm5120_flash_probe,
-       .remove         = adm5120_flash_remove,
-#ifdef CONFIG_PM
-       .suspend        = adm5120_flash_suspend,
-       .resume         = adm5120_flash_resume,
-       .shutdown       = adm5120_flash_shutdown,
-#endif
-       .driver         = {
-               .name   = DRV_NAME,
-       },
-};
-
-static int __init adm5120_flash_init(void)
-{
-       int err;
-
-       err = platform_driver_register(&adm5120_flash_driver);
-
-       return err;
-}
-
-static void __exit adm5120_flash_exit(void)
-{
-       platform_driver_unregister(&adm5120_flash_driver);
-}
-
-module_init(adm5120_flash_init);
-module_exit(adm5120_flash_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
diff --git a/target/linux/adm5120/files-3.8/drivers/mtd/trxsplit.c b/target/linux/adm5120/files-3.8/drivers/mtd/trxsplit.c
deleted file mode 100644 (file)
index 76cbdc7..0000000
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- *  Copyright (C) Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/kmod.h>
-#include <linux/root_dev.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/byteorder/generic.h>
-
-#define PFX    "trxsplit: "
-
-#define TRX_MAGIC      0x30524448      /* "HDR0" */
-#define TRX_VERSION    1
-#define TRX_MAX_LEN    0x3A0000
-#define TRX_NO_HEADER  0x1     /* do not write TRX header */
-#define TRX_GZ_FILES   0x2     /* contains individual gzip files */
-#define TRX_MAX_OFFSET 3
-#define TRX_MIN_KERNEL_SIZE    (256 * 1024)
-
-struct trx_header {
-       u32 magic;      /* "HDR0" */
-       u32 len;        /* Length of file including header */
-       u32 crc32;      /* 32-bit CRC from flag_version to end of file */
-       u32 flag_version; /* 0:15 flags, 16:31 version */
-       u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions */
-};
-
-#define TRX_ALIGN      0x1000
-
-static int trx_nr_parts;
-static unsigned long trx_offset;
-static struct mtd_info *trx_mtd;
-static struct mtd_partition trx_parts[TRX_MAX_OFFSET];
-static struct trx_header trx_hdr;
-
-static int trxsplit_refresh_partitions(struct mtd_info *mtd);
-
-static int trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset)
-{
-       size_t retlen;
-       int err;
-
-       err = mtd_read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr);
-       if (err) {
-               printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name);
-               goto err_out;
-       }
-
-       if (retlen != sizeof(trx_hdr)) {
-               printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name);
-               goto err_out;
-       }
-
-       trx_hdr.magic = le32_to_cpu(trx_hdr.magic);
-       trx_hdr.len = le32_to_cpu(trx_hdr.len);
-       trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32);
-       trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version);
-       trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]);
-       trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]);
-       trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]);
-
-       /* sanity checks */
-       if (trx_hdr.magic != TRX_MAGIC)
-               goto err_out;
-
-       if (trx_hdr.len > mtd->size - offset)
-               goto err_out;
-
-       /* TODO: add crc32 checking too? */
-
-       return 0;
-
-err_out:
-       return -1;
-}
-
-static void trxsplit_findtrx(struct mtd_info *mtd)
-{
-       unsigned long offset;
-       int err;
-
-       printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name);
-
-       err = 0;
-       for (offset = 0; offset < mtd->size; offset += TRX_ALIGN) {
-               err = trxsplit_checktrx(mtd, offset);
-               if (err == 0)
-                       break;
-       }
-
-       if (err)
-               return;
-
-       printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset);
-
-       trx_mtd = mtd;
-       trx_offset = offset;
-}
-
-static void trxsplit_create_partitions(struct mtd_info *mtd)
-{
-       struct mtd_partition *part = trx_parts;
-       int err;
-       int i;
-
-       for (i = 0; i < TRX_MAX_OFFSET; i++) {
-               part = &trx_parts[i];
-               if (trx_hdr.offsets[i] == 0)
-                       continue;
-               part->offset = trx_offset + trx_hdr.offsets[i];
-               trx_nr_parts++;
-       }
-
-       for (i = 0; i < trx_nr_parts-1; i++)
-               trx_parts[i].size = trx_parts[i+1].offset - trx_parts[i].offset;
-
-       trx_parts[i].size = mtd->size - trx_parts[i].offset;
-
-       i = 0;
-       part = &trx_parts[i];
-       if (part->size < TRX_MIN_KERNEL_SIZE) {
-               part->name = "loader";
-               i++;
-       }
-
-       part = &trx_parts[i];
-       part->name = "kernel";
-       i++;
-
-       part = &trx_parts[i];
-       part->name = "rootfs";
-
-       err = mtd_device_register(mtd, trx_parts, trx_nr_parts);
-       if (err) {
-               printk(KERN_ALERT PFX "adding TRX partitions failed\n");
-               return;
-       }
-
-       mtd->refresh_device = trxsplit_refresh_partitions;
-}
-
-static int trxsplit_refresh_partitions(struct mtd_info *mtd)
-{
-       printk(KERN_INFO PFX "refreshing TRX partitions in '%s' (%d,%d)\n",
-               mtd->name, MTD_BLOCK_MAJOR, mtd->index);
-
-       /* remove old partitions */
-       mtd_device_unregister(mtd);
-
-       trxsplit_findtrx(mtd);
-       if (!trx_mtd)
-               goto err;
-
-       trxsplit_create_partitions(trx_mtd);
-       return 1;
-
-err:
-       return 0;
-}
-
-static void __init trxsplit_add_mtd(struct mtd_info *mtd)
-{
-       if (mtd->type != MTD_NORFLASH) {
-               printk(KERN_INFO PFX "'%s' is not a NOR flash, skipped\n",
-                               mtd->name);
-               return;
-       }
-
-       if (!trx_mtd)
-               trxsplit_findtrx(mtd);
-}
-
-static void __init trxsplit_remove_mtd(struct mtd_info *mtd)
-{
-       /* nothing to do */
-}
-
-static struct mtd_notifier trxsplit_notifier __initdata = {
-       .add    = trxsplit_add_mtd,
-       .remove = trxsplit_remove_mtd,
-};
-
-static void __init trxsplit_scan(void)
-{
-       register_mtd_user(&trxsplit_notifier);
-       unregister_mtd_user(&trxsplit_notifier);
-}
-
-static int __init trxsplit_init(void)
-{
-       trxsplit_scan();
-
-       if (trx_mtd) {
-               printk(KERN_INFO PFX "creating TRX partitions in '%s' "
-                       "(%d,%d)\n", trx_mtd->name, MTD_BLOCK_MAJOR,
-                       trx_mtd->index);
-               trxsplit_create_partitions(trx_mtd);
-       }
-
-       return 0;
-}
-
-late_initcall(trxsplit_init);
diff --git a/target/linux/adm5120/files-3.8/drivers/net/adm5120sw.c b/target/linux/adm5120/files-3.8/drivers/net/adm5120sw.c
deleted file mode 100644 (file)
index 7fbabb0..0000000
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- *  ADM5120 built-in ethernet switch driver
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This code was based on a driver for Linux 2.6.xx by Jeroen Vreeken.
- *    Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *  NAPI extension for the Jeroen's driver
- *    Copyright Thomas Langer (Thomas.Langer@infineon.com), 2007
- *    Copyright Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007
- *  Inspiration for the Jeroen's driver came from the ADMtek 2.4 driver.
- *    Copyright ADMtek Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2  as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/mipsregs.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#include "adm5120sw.h"
-#include <linux/dma-mapping.h>
-
-#define DRV_NAME       "adm5120-switch"
-#define DRV_DESC       "ADM5120 built-in ethernet switch driver"
-#define DRV_VERSION    "0.1.1"
-
-#define CONFIG_ADM5120_SWITCH_NAPI     1
-#undef CONFIG_ADM5120_SWITCH_DEBUG
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_DEBUG
-#define SW_DBG(f, a...)                printk(KERN_DEBUG "%s: " f, DRV_NAME , ## a)
-#else
-#define SW_DBG(f, a...)                do {} while (0)
-#endif
-#define SW_ERR(f, a...)                printk(KERN_ERR "%s: " f, DRV_NAME , ## a)
-#define SW_INFO(f, a...)       printk(KERN_INFO "%s: " f, DRV_NAME , ## a)
-
-#define SWITCH_NUM_PORTS       6
-#define ETH_CSUM_LEN           4
-
-#define RX_MAX_PKTLEN  1550
-#define RX_RING_SIZE   64
-
-#define TX_RING_SIZE   32
-#define TX_QUEUE_LEN   28      /* Limit ring entries actually used. */
-#define TX_TIMEOUT     (HZ * 400)
-
-#define RX_DESCS_SIZE  (RX_RING_SIZE * sizeof(struct dma_desc *))
-#define RX_SKBS_SIZE   (RX_RING_SIZE * sizeof(struct sk_buff *))
-#define TX_DESCS_SIZE  (TX_RING_SIZE * sizeof(struct dma_desc *))
-#define TX_SKBS_SIZE   (TX_RING_SIZE * sizeof(struct sk_buff *))
-
-#define SKB_ALLOC_LEN          (RX_MAX_PKTLEN + 32)
-#define SKB_RESERVE_LEN                (NET_IP_ALIGN + NET_SKB_PAD)
-
-#define SWITCH_INTS_HIGH (SWITCH_INT_SHD | SWITCH_INT_RHD | SWITCH_INT_HDF)
-#define SWITCH_INTS_LOW (SWITCH_INT_SLD | SWITCH_INT_RLD | SWITCH_INT_LDF)
-#define SWITCH_INTS_ERR (SWITCH_INT_RDE | SWITCH_INT_SDE | SWITCH_INT_CPUH)
-#define SWITCH_INTS_Q (SWITCH_INT_P0QF | SWITCH_INT_P1QF | SWITCH_INT_P2QF | \
-                       SWITCH_INT_P3QF | SWITCH_INT_P4QF | SWITCH_INT_P5QF | \
-                       SWITCH_INT_CPQF | SWITCH_INT_GQF)
-
-#define SWITCH_INTS_ALL (SWITCH_INTS_HIGH | SWITCH_INTS_LOW | \
-                       SWITCH_INTS_ERR | SWITCH_INTS_Q | \
-                       SWITCH_INT_MD | SWITCH_INT_PSC)
-
-#define SWITCH_INTS_USED (SWITCH_INTS_LOW | SWITCH_INT_PSC)
-#define SWITCH_INTS_POLL (SWITCH_INT_RLD | SWITCH_INT_LDF | SWITCH_INT_SLD)
-
-/* ------------------------------------------------------------------------ */
-
-struct adm5120_if_priv {
-       struct net_device *dev;
-
-       unsigned int    vlan_no;
-       unsigned int    port_mask;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       struct napi_struct napi;
-#endif
-};
-
-struct dma_desc {
-       __u32                   buf1;
-#define DESC_OWN               (1UL << 31)     /* Owned by the switch */
-#define DESC_EOR               (1UL << 28)     /* End of Ring */
-#define DESC_ADDR_MASK         0x1FFFFFF
-#define DESC_ADDR(x)   ((__u32)(x) & DESC_ADDR_MASK)
-       __u32                   buf2;
-#define DESC_BUF2_EN           (1UL << 31)     /* Buffer 2 enable */
-       __u32                   buflen;
-       __u32                   misc;
-/* definitions for tx/rx descriptors */
-#define DESC_PKTLEN_SHIFT      16
-#define DESC_PKTLEN_MASK       0x7FF
-/* tx descriptor specific part */
-#define DESC_CSUM              (1UL << 31)     /* Append checksum */
-#define DESC_DSTPORT_SHIFT     8
-#define DESC_DSTPORT_MASK      0x3F
-#define DESC_VLAN_MASK         0x3F
-/* rx descriptor specific part */
-#define DESC_SRCPORT_SHIFT     12
-#define DESC_SRCPORT_MASK      0x7
-#define DESC_DA_MASK           0x3
-#define DESC_DA_SHIFT          4
-#define DESC_IPCSUM_FAIL       (1UL << 3)      /* IP checksum fail */
-#define DESC_VLAN_TAG          (1UL << 2)      /* VLAN tag present */
-#define DESC_TYPE_MASK         0x3             /* mask for Packet type */
-#define DESC_TYPE_IP           0x0             /* IP packet */
-#define DESC_TYPE_PPPoE                0x1             /* PPPoE packet */
-} __attribute__ ((aligned(16)));
-
-/* ------------------------------------------------------------------------ */
-
-static int adm5120_nrdevs;
-
-static struct net_device *adm5120_devs[SWITCH_NUM_PORTS];
-/* Lookup table port -> device */
-static struct net_device *adm5120_port[SWITCH_NUM_PORTS];
-
-static struct dma_desc *txl_descs;
-static struct dma_desc *rxl_descs;
-
-static dma_addr_t txl_descs_dma;
-static dma_addr_t rxl_descs_dma;
-
-static struct sk_buff **txl_skbuff;
-static struct sk_buff **rxl_skbuff;
-
-static unsigned int cur_rxl, dirty_rxl; /* producer/consumer ring indices */
-static unsigned int cur_txl, dirty_txl;
-
-static unsigned int sw_used;
-
-static DEFINE_SPINLOCK(tx_lock);
-
-/* ------------------------------------------------------------------------ */
-
-static inline u32 sw_read_reg(u32 reg)
-{
-       return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
-}
-
-static inline void sw_write_reg(u32 reg, u32 val)
-{
-       __raw_writel(val, (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
-}
-
-static inline void sw_int_mask(u32 mask)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       t |= mask;
-       sw_write_reg(SWITCH_REG_INT_MASK, t);
-}
-
-static inline void sw_int_unmask(u32 mask)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       t &= ~mask;
-       sw_write_reg(SWITCH_REG_INT_MASK, t);
-}
-
-static inline void sw_int_ack(u32 mask)
-{
-       sw_write_reg(SWITCH_REG_INT_STATUS, mask);
-}
-
-static inline u32 sw_int_status(void)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_STATUS);
-       t &= ~sw_read_reg(SWITCH_REG_INT_MASK);
-       return t;
-}
-
-static inline u32 desc_get_srcport(struct dma_desc *desc)
-{
-       return (desc->misc >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK;
-}
-
-static inline u32 desc_get_pktlen(struct dma_desc *desc)
-{
-       return (desc->misc >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK;
-}
-
-static inline int desc_ipcsum_fail(struct dma_desc *desc)
-{
-       return ((desc->misc & DESC_IPCSUM_FAIL) != 0);
-}
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_DEBUG
-static void sw_dump_desc(char *label, struct dma_desc *desc, int tx)
-{
-       u32 t;
-
-       SW_DBG("%s %s desc/%p\n", label, tx ? "tx" : "rx", desc);
-
-       t = desc->buf1;
-       SW_DBG("    buf1 %08X addr=%08X; len=%08X %s%s\n", t,
-               t & DESC_ADDR_MASK,
-               desc->buflen,
-               (t & DESC_OWN) ? "SWITCH" : "CPU",
-               (t & DESC_EOR) ? " RE" : "");
-
-       t = desc->buf2;
-       SW_DBG("    buf2 %08X addr=%08X%s\n", desc->buf2,
-               t & DESC_ADDR_MASK,
-               (t & DESC_BUF2_EN) ? " EN" : "");
-
-       t = desc->misc;
-       if (tx)
-               SW_DBG("    misc %08X%s pktlen=%04X ports=%02X vlan=%02X\n", t,
-                       (t & DESC_CSUM) ? " CSUM" : "",
-                       (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
-                       (t >> DESC_DSTPORT_SHIFT) & DESC_DSTPORT_MASK,
-                       t & DESC_VLAN_MASK);
-       else
-               SW_DBG("    misc %08X pktlen=%04X port=%d DA=%d%s%s type=%d\n",
-                       t,
-                       (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
-                       (t >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK,
-                       (t >> DESC_DA_SHIFT) & DESC_DA_MASK,
-                       (t & DESC_IPCSUM_FAIL) ? " IPCF" : "",
-                       (t & DESC_VLAN_TAG) ? " VLAN" : "",
-                       (t & DESC_TYPE_MASK));
-}
-
-static void sw_dump_intr_mask(char *label, u32 mask)
-{
-       SW_DBG("%s %08X%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
-               label, mask,
-               (mask & SWITCH_INT_SHD) ? " SHD" : "",
-               (mask & SWITCH_INT_SLD) ? " SLD" : "",
-               (mask & SWITCH_INT_RHD) ? " RHD" : "",
-               (mask & SWITCH_INT_RLD) ? " RLD" : "",
-               (mask & SWITCH_INT_HDF) ? " HDF" : "",
-               (mask & SWITCH_INT_LDF) ? " LDF" : "",
-               (mask & SWITCH_INT_P0QF) ? " P0QF" : "",
-               (mask & SWITCH_INT_P1QF) ? " P1QF" : "",
-               (mask & SWITCH_INT_P2QF) ? " P2QF" : "",
-               (mask & SWITCH_INT_P3QF) ? " P3QF" : "",
-               (mask & SWITCH_INT_P4QF) ? " P4QF" : "",
-               (mask & SWITCH_INT_CPQF) ? " CPQF" : "",
-               (mask & SWITCH_INT_GQF) ? " GQF" : "",
-               (mask & SWITCH_INT_MD) ? " MD" : "",
-               (mask & SWITCH_INT_BCS) ? " BCS" : "",
-               (mask & SWITCH_INT_PSC) ? " PSC" : "",
-               (mask & SWITCH_INT_ID) ? " ID" : "",
-               (mask & SWITCH_INT_W0TE) ? " W0TE" : "",
-               (mask & SWITCH_INT_W1TE) ? " W1TE" : "",
-               (mask & SWITCH_INT_RDE) ? " RDE" : "",
-               (mask & SWITCH_INT_SDE) ? " SDE" : "",
-               (mask & SWITCH_INT_CPUH) ? " CPUH" : "");
-}
-
-static void sw_dump_regs(void)
-{
-       u32 t;
-
-       t = sw_read_reg(SWITCH_REG_PHY_STATUS);
-       SW_DBG("phy_status: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       SW_DBG("cpup_conf: %08X%s%s%s\n", t,
-               (t & CPUP_CONF_DCPUP) ? " DCPUP" : "",
-               (t & CPUP_CONF_CRCP) ? " CRCP" : "",
-               (t & CPUP_CONF_BTM) ? " BTM" : "");
-
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       SW_DBG("port_conf0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PORT_CONF1);
-       SW_DBG("port_conf1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PORT_CONF2);
-       SW_DBG("port_conf2: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_VLAN_G1);
-       SW_DBG("vlan g1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_VLAN_G2);
-       SW_DBG("vlan g2: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_BW_CNTL0);
-       SW_DBG("bw_cntl0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_BW_CNTL1);
-       SW_DBG("bw_cntl1: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL0);
-       SW_DBG("phy_cntl0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL1);
-       SW_DBG("phy_cntl1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL2);
-       SW_DBG("phy_cntl2: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
-       SW_DBG("phy_cntl3: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL4);
-       SW_DBG("phy_cntl4: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_INT_STATUS);
-       sw_dump_intr_mask("int_status: ", t);
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       sw_dump_intr_mask("int_mask: ", t);
-
-       t = sw_read_reg(SWITCH_REG_SHDA);
-       SW_DBG("shda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_SLDA);
-       SW_DBG("slda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_RHDA);
-       SW_DBG("rhda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_RLDA);
-       SW_DBG("rlda: %08X\n", t);
-}
-#else
-static inline void sw_dump_desc(char *label, struct dma_desc *desc, int tx) {}
-static void sw_dump_intr_mask(char *label, u32 mask) {}
-static inline void sw_dump_regs(void) {}
-#endif /* CONFIG_ADM5120_SWITCH_DEBUG */
-
-/* ------------------------------------------------------------------------ */
-
-static inline void adm5120_rx_dma_update(struct dma_desc *desc,
-       struct sk_buff *skb, int end)
-{
-       desc->misc = 0;
-       desc->buf2 = 0;
-       desc->buflen = RX_MAX_PKTLEN;
-       desc->buf1 = DESC_ADDR(skb->data) |
-               DESC_OWN | (end ? DESC_EOR : 0);
-}
-
-static void adm5120_switch_rx_refill(void)
-{
-       unsigned int entry;
-
-       for (; cur_rxl - dirty_rxl > 0; dirty_rxl++) {
-               struct dma_desc *desc;
-               struct sk_buff *skb;
-
-               entry = dirty_rxl % RX_RING_SIZE;
-               desc = &rxl_descs[entry];
-
-               skb = rxl_skbuff[entry];
-               if (skb == NULL) {
-                       skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
-                       if (skb) {
-                               skb_reserve(skb, SKB_RESERVE_LEN);
-                               rxl_skbuff[entry] = skb;
-                       } else {
-                               SW_ERR("no memory for skb\n");
-                               desc->buflen = 0;
-                               desc->buf2 = 0;
-                               desc->misc = 0;
-                               desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN;
-                               break;
-                       }
-               }
-
-               desc->buf2 = 0;
-               desc->buflen = RX_MAX_PKTLEN;
-               desc->misc = 0;
-               desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN |
-                               DESC_ADDR(skb->data);
-       }
-}
-
-static int adm5120_switch_rx(int limit)
-{
-       unsigned int done = 0;
-
-       SW_DBG("rx start, limit=%d, cur_rxl=%u, dirty_rxl=%u\n",
-                               limit, cur_rxl, dirty_rxl);
-
-       while (done < limit) {
-               int entry = cur_rxl % RX_RING_SIZE;
-               struct dma_desc *desc = &rxl_descs[entry];
-               struct net_device *rdev;
-               unsigned int port;
-
-               if (desc->buf1 & DESC_OWN)
-                       break;
-
-               if (dirty_rxl + RX_RING_SIZE == cur_rxl)
-                       break;
-
-               port = desc_get_srcport(desc);
-               rdev = adm5120_port[port];
-
-               SW_DBG("rx descriptor %u, desc=%p, skb=%p\n", entry, desc,
-                               rxl_skbuff[entry]);
-
-               if ((rdev) && netif_running(rdev)) {
-                       struct sk_buff *skb = rxl_skbuff[entry];
-                       int pktlen;
-
-                       pktlen = desc_get_pktlen(desc);
-                       pktlen -= ETH_CSUM_LEN;
-
-                       if ((pktlen == 0) || desc_ipcsum_fail(desc)) {
-                               rdev->stats.rx_errors++;
-                               if (pktlen == 0)
-                                       rdev->stats.rx_length_errors++;
-                               if (desc_ipcsum_fail(desc))
-                                       rdev->stats.rx_crc_errors++;
-                               SW_DBG("rx error, recycling skb %u\n", entry);
-                       } else {
-                               skb_put(skb, pktlen);
-
-                               skb->dev = rdev;
-                               skb->protocol = eth_type_trans(skb, rdev);
-                               skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-                               dma_cache_wback_inv((unsigned long)skb->data,
-                                       skb->len);
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-                               netif_receive_skb(skb);
-#else
-                               netif_rx(skb);
-#endif
-
-                               rdev->last_rx = jiffies;
-                               rdev->stats.rx_packets++;
-                               rdev->stats.rx_bytes += pktlen;
-
-                               rxl_skbuff[entry] = NULL;
-                               done++;
-                       }
-               } else {
-                       SW_DBG("no rx device, recycling skb %u\n", entry);
-               }
-
-               cur_rxl++;
-               if (cur_rxl - dirty_rxl > RX_RING_SIZE / 4)
-                       adm5120_switch_rx_refill();
-       }
-
-       adm5120_switch_rx_refill();
-
-       SW_DBG("rx finished, cur_rxl=%u, dirty_rxl=%u, processed %d\n",
-                               cur_rxl, dirty_rxl, done);
-
-       return done;
-}
-
-static void adm5120_switch_tx(void)
-{
-       unsigned int entry;
-
-       spin_lock(&tx_lock);
-       entry = dirty_txl % TX_RING_SIZE;
-       while (dirty_txl != cur_txl) {
-               struct dma_desc *desc = &txl_descs[entry];
-               struct sk_buff *skb = txl_skbuff[entry];
-
-               if (desc->buf1 & DESC_OWN)
-                       break;
-
-               if (netif_running(skb->dev)) {
-                       skb->dev->stats.tx_bytes += skb->len;
-                       skb->dev->stats.tx_packets++;
-               }
-
-               dev_kfree_skb_irq(skb);
-               txl_skbuff[entry] = NULL;
-               entry = (++dirty_txl) % TX_RING_SIZE;
-       }
-
-       if ((cur_txl - dirty_txl) < TX_QUEUE_LEN - 4) {
-               int i;
-               for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-                       if (!adm5120_devs[i])
-                               continue;
-                       netif_wake_queue(adm5120_devs[i]);
-               }
-       }
-       spin_unlock(&tx_lock);
-}
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-static int adm5120_if_poll(struct napi_struct *napi, int limit)
-{
-       struct adm5120_if_priv *priv = container_of(napi,
-                               struct adm5120_if_priv, napi);
-       struct net_device *dev  __maybe_unused = priv->dev;
-       int done;
-       u32 status;
-
-       sw_int_ack(SWITCH_INTS_POLL);
-
-       SW_DBG("%s: processing TX ring\n", dev->name);
-       adm5120_switch_tx();
-
-       SW_DBG("%s: processing RX ring\n", dev->name);
-       done = adm5120_switch_rx(limit);
-
-       status = sw_int_status() & SWITCH_INTS_POLL;
-       if ((done < limit) && (!status)) {
-               SW_DBG("disable polling mode for %s\n", dev->name);
-               napi_complete(napi);
-               sw_int_unmask(SWITCH_INTS_POLL);
-               return 0;
-       }
-
-       SW_DBG("%s still in polling mode, done=%d, status=%x\n",
-                       dev->name, done, status);
-       return 1;
-}
-#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-
-
-static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
-{
-       u32 status;
-
-       status = sw_int_status();
-       status &= SWITCH_INTS_ALL;
-       if (!status)
-               return IRQ_NONE;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       sw_int_ack(status & ~SWITCH_INTS_POLL);
-
-       if (status & SWITCH_INTS_POLL) {
-               struct net_device *dev = dev_id;
-               struct adm5120_if_priv *priv = netdev_priv(dev);
-
-               sw_dump_intr_mask("poll ints", status);
-               SW_DBG("enable polling mode for %s\n", dev->name);
-               sw_int_mask(SWITCH_INTS_POLL);
-               napi_schedule(&priv->napi);
-       }
-#else
-       sw_int_ack(status);
-
-       if (status & (SWITCH_INT_RLD | SWITCH_INT_LDF))
-               adm5120_switch_rx(RX_RING_SIZE);
-
-       if (status & SWITCH_INT_SLD)
-               adm5120_switch_tx();
-#endif
-
-       return IRQ_HANDLED;
-}
-
-static void adm5120_set_bw(char *matrix)
-{
-       unsigned long val;
-
-       /* Port 0 to 3 are set using the bandwidth control 0 register */
-       val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-       sw_write_reg(SWITCH_REG_BW_CNTL0, val);
-
-       /* Port 4 and 5 are set using the bandwidth control 1 register */
-       val = matrix[4];
-       if (matrix[5] == 1)
-               sw_write_reg(SWITCH_REG_BW_CNTL1, val | 0x80000000);
-       else
-               sw_write_reg(SWITCH_REG_BW_CNTL1, val & ~0x8000000);
-
-       SW_DBG("D: ctl0 0x%ux, ctl1 0x%ux\n", sw_read_reg(SWITCH_REG_BW_CNTL0),
-               sw_read_reg(SWITCH_REG_BW_CNTL1));
-}
-
-static void adm5120_switch_tx_ring_reset(struct dma_desc *desc,
-               struct sk_buff **skbl, int num)
-{
-       memset(desc, 0, num * sizeof(*desc));
-       desc[num-1].buf1 |= DESC_EOR;
-       memset(skbl, 0, sizeof(struct skb *) * num);
-
-       cur_txl = 0;
-       dirty_txl = 0;
-}
-
-static void adm5120_switch_rx_ring_reset(struct dma_desc *desc,
-               struct sk_buff **skbl, int num)
-{
-       int i;
-
-       memset(desc, 0, num * sizeof(*desc));
-       for (i = 0; i < num; i++) {
-               skbl[i] = dev_alloc_skb(SKB_ALLOC_LEN);
-               if (!skbl[i]) {
-                       i = num;
-                       break;
-               }
-               skb_reserve(skbl[i], SKB_RESERVE_LEN);
-               adm5120_rx_dma_update(&desc[i], skbl[i], (num - 1 == i));
-       }
-
-       cur_rxl = 0;
-       dirty_rxl = 0;
-}
-
-static int adm5120_switch_tx_ring_alloc(void)
-{
-       int err;
-
-       txl_descs = dma_alloc_coherent(NULL, TX_DESCS_SIZE, &txl_descs_dma,
-                                       GFP_ATOMIC);
-       if (!txl_descs) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       txl_skbuff = kzalloc(TX_SKBS_SIZE, GFP_KERNEL);
-       if (!txl_skbuff) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       return 0;
-
-err:
-       return err;
-}
-
-static void adm5120_switch_tx_ring_free(void)
-{
-       int i;
-
-       if (txl_skbuff) {
-               for (i = 0; i < TX_RING_SIZE; i++)
-                       if (txl_skbuff[i])
-                               kfree_skb(txl_skbuff[i]);
-               kfree(txl_skbuff);
-       }
-
-       if (txl_descs)
-               dma_free_coherent(NULL, TX_DESCS_SIZE, txl_descs,
-                       txl_descs_dma);
-}
-
-static int adm5120_switch_rx_ring_alloc(void)
-{
-       int err;
-       int i;
-
-       /* init RX ring */
-       rxl_descs = dma_alloc_coherent(NULL, RX_DESCS_SIZE, &rxl_descs_dma,
-                                       GFP_ATOMIC);
-       if (!rxl_descs) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       rxl_skbuff = kzalloc(RX_SKBS_SIZE, GFP_KERNEL);
-       if (!rxl_skbuff) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       for (i = 0; i < RX_RING_SIZE; i++) {
-               struct sk_buff *skb;
-               skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
-               if (!skb) {
-                       err = -ENOMEM;
-                       goto err;
-               }
-               rxl_skbuff[i] = skb;
-               skb_reserve(skb, SKB_RESERVE_LEN);
-       }
-
-       return 0;
-
-err:
-       return err;
-}
-
-static void adm5120_switch_rx_ring_free(void)
-{
-       int i;
-
-       if (rxl_skbuff) {
-               for (i = 0; i < RX_RING_SIZE; i++)
-                       if (rxl_skbuff[i])
-                               kfree_skb(rxl_skbuff[i]);
-               kfree(rxl_skbuff);
-       }
-
-       if (rxl_descs)
-               dma_free_coherent(NULL, RX_DESCS_SIZE, rxl_descs,
-                       rxl_descs_dma);
-}
-
-static void adm5120_write_mac(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       unsigned char *mac = dev->dev_addr;
-       u32 t;
-
-       t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) |
-               (mac[4] << MAC_WT1_MAC4_SHIFT) | (mac[5] << MAC_WT1_MAC5_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT1, t);
-
-       t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
-               MAC_WT0_MAWC | MAC_WT0_WVE | (priv->vlan_no<<3);
-
-       sw_write_reg(SWITCH_REG_MAC_WT0, t);
-
-       while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD))
-               ;
-}
-
-static void adm5120_set_vlan(char *matrix)
-{
-       unsigned long val;
-       int vlan_port, port;
-
-       val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-       sw_write_reg(SWITCH_REG_VLAN_G1, val);
-       val = matrix[4] + (matrix[5]<<8);
-       sw_write_reg(SWITCH_REG_VLAN_G2, val);
-
-       /* Now set/update the port vs. device lookup table */
-       for (port = 0; port < SWITCH_NUM_PORTS; port++) {
-               for (vlan_port = 0; vlan_port < SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++)
-                       ;
-               if (vlan_port < SWITCH_NUM_PORTS)
-                       adm5120_port[port] = adm5120_devs[vlan_port];
-               else
-                       adm5120_port[port] = NULL;
-       }
-}
-
-static void adm5120_switch_set_vlan_mac(unsigned int vlan, unsigned char *mac)
-{
-       u32 t;
-
-       t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT)
-               | (mac[4] << MAC_WT1_MAC4_SHIFT)
-               | (mac[5] << MAC_WT1_MAC5_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT1, t);
-
-       t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
-               MAC_WT0_MAWC | MAC_WT0_WVE | (vlan << MAC_WT0_WVN_SHIFT) |
-               (MAC_WT0_WAF_STATIC << MAC_WT0_WAF_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT0, t);
-
-       do {
-               t = sw_read_reg(SWITCH_REG_MAC_WT0);
-       } while ((t & MAC_WT0_MWD) == 0);
-}
-
-static void adm5120_switch_set_vlan_ports(unsigned int vlan, u32 ports)
-{
-       unsigned int reg;
-       u32 t;
-
-       if (vlan < 4)
-               reg = SWITCH_REG_VLAN_G1;
-       else {
-               vlan -= 4;
-               reg = SWITCH_REG_VLAN_G2;
-       }
-
-       t = sw_read_reg(reg);
-       t &= ~(0xFF << (vlan*8));
-       t |= (ports << (vlan*8));
-       sw_write_reg(reg, t);
-}
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-static inline void adm5120_if_napi_enable(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       napi_enable(&priv->napi);
-}
-
-static inline void adm5120_if_napi_disable(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       napi_disable(&priv->napi);
-}
-#else
-static inline void adm5120_if_napi_enable(struct net_device *dev) {}
-static inline void adm5120_if_napi_disable(struct net_device *dev) {}
-#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-
-static int adm5120_if_open(struct net_device *dev)
-{
-       u32 t;
-       int err;
-       int i;
-
-       adm5120_if_napi_enable(dev);
-
-       err = request_irq(dev->irq, adm5120_switch_irq, IRQF_SHARED,
-                         dev->name, dev);
-       if (err) {
-               SW_ERR("unable to get irq for %s\n", dev->name);
-               goto err;
-       }
-
-       if (!sw_used++)
-               /* enable interrupts on first open */
-               sw_int_unmask(SWITCH_INTS_USED);
-
-       /* enable (additional) port */
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               if (dev == adm5120_devs[i])
-                       t &= ~adm5120_eth_vlans[i];
-       }
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       netif_start_queue(dev);
-
-       return 0;
-
-err:
-       adm5120_if_napi_disable(dev);
-       return err;
-}
-
-static int adm5120_if_stop(struct net_device *dev)
-{
-       u32 t;
-       int i;
-
-       netif_stop_queue(dev);
-       adm5120_if_napi_disable(dev);
-
-       /* disable port if not assigned to other devices */
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       t |= SWITCH_PORTS_NOCPU;
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
-                       t &= ~adm5120_eth_vlans[i];
-       }
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       if (!--sw_used)
-               sw_int_mask(SWITCH_INTS_USED);
-
-       free_irq(dev->irq, dev);
-
-       return 0;
-}
-
-static int adm5120_if_hard_start_xmit(struct sk_buff *skb,
-               struct net_device *dev)
-{
-       struct dma_desc *desc;
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       unsigned int entry;
-       unsigned long data;
-       int i;
-
-       /* lock switch irq */
-       spin_lock_irq(&tx_lock);
-
-       /* calculate the next TX descriptor entry. */
-       entry = cur_txl % TX_RING_SIZE;
-
-       desc = &txl_descs[entry];
-       if (desc->buf1 & DESC_OWN) {
-               /* We want to write a packet but the TX queue is still
-                * occupied by the DMA. We are faster than the DMA... */
-               SW_DBG("%s unable to transmit, packet dopped\n", dev->name);
-               dev_kfree_skb(skb);
-               dev->stats.tx_dropped++;
-               return 0;
-       }
-
-       txl_skbuff[entry] = skb;
-       data = (desc->buf1 & DESC_EOR);
-       data |= DESC_ADDR(skb->data);
-
-       desc->misc =
-           ((skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len) << DESC_PKTLEN_SHIFT) |
-           (0x1 << priv->vlan_no);
-
-       desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-
-       desc->buf1 = data | DESC_OWN;
-       sw_write_reg(SWITCH_REG_SEND_TRIG, SEND_TRIG_STL);
-
-       cur_txl++;
-       if (cur_txl == dirty_txl + TX_QUEUE_LEN) {
-               for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-                       if (!adm5120_devs[i])
-                               continue;
-                       netif_stop_queue(adm5120_devs[i]);
-               }
-       }
-
-       dev->trans_start = jiffies;
-
-       spin_unlock_irq(&tx_lock);
-
-       return 0;
-}
-
-static void adm5120_if_tx_timeout(struct net_device *dev)
-{
-       SW_INFO("TX timeout on %s\n", dev->name);
-}
-
-static void adm5120_if_set_rx_mode(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       u32 ports;
-       u32 t;
-
-       ports = adm5120_eth_vlans[priv->vlan_no] & SWITCH_PORTS_NOCPU;
-
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       if (dev->flags & IFF_PROMISC)
-               /* enable unknown packets */
-               t &= ~(ports << CPUP_CONF_DUNP_SHIFT);
-       else
-               /* disable unknown packets */
-               t |= (ports << CPUP_CONF_DUNP_SHIFT);
-
-       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
-                                       netdev_mc_count(dev))
-               /* enable multicast packets */
-               t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
-       else
-               /* disable multicast packets */
-               t |= (ports << CPUP_CONF_DMCP_SHIFT);
-
-       /* If there is any port configured to be in promiscuous mode, then the */
-       /* Bridge Test Mode has to be activated. This will result in           */
-       /* transporting also packets learned in another VLAN to be forwarded   */
-       /* to the CPU.                                                         */
-       /* The difficult scenario is when we want to build a bridge on the CPU.*/
-       /* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
-       /* CPU port in VLAN1. Now we build a bridge on the CPU between         */
-       /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
-       /* Now assume a packet with ethernet source address 99 enters port 0   */
-       /* It will be forwarded to the CPU because it is unknown. Then the     */
-       /* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
-       /* When now a packet with ethernet destination address 99 comes in at  */
-       /* port 1 in VLAN1, then the switch has learned that this address is   */
-       /* located at port 0 in VLAN0. Therefore the switch will drop          */
-       /* this packet. In order to avoid this and to send the packet still    */
-       /* to the CPU, the Bridge Test Mode has to be activated.               */
-
-       /* Check if there is any vlan in promisc mode. */
-       if (~t & (SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT))
-               t |= CPUP_CONF_BTM;  /* Enable Bridge Testing Mode */
-       else
-               t &= ~CPUP_CONF_BTM; /* Disable Bridge Testing Mode */
-
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-}
-
-static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
-{
-       int ret;
-
-       ret = eth_mac_addr(dev, p);
-       if (ret)
-               return ret;
-
-       adm5120_write_mac(dev);
-       return 0;
-}
-
-static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
-               int cmd)
-{
-       int err;
-       struct adm5120_sw_info info;
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-
-       switch (cmd) {
-       case SIOCGADMINFO:
-               info.magic = 0x5120;
-               info.ports = adm5120_nrdevs;
-               info.vlan = priv->vlan_no;
-               err = copy_to_user(rq->ifr_data, &info, sizeof(info));
-               if (err)
-                       return -EFAULT;
-               break;
-       case SIOCSMATRIX:
-               if (!capable(CAP_NET_ADMIN))
-                       return -EPERM;
-               err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
-                                       sizeof(adm5120_eth_vlans));
-               if (err)
-                       return -EFAULT;
-               adm5120_set_vlan(adm5120_eth_vlans);
-               break;
-       case SIOCGMATRIX:
-               err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
-                                       sizeof(adm5120_eth_vlans));
-               if (err)
-                       return -EFAULT;
-               break;
-       default:
-               return -EOPNOTSUPP;
-       }
-       return 0;
-}
-
-static const struct net_device_ops adm5120sw_netdev_ops = {
-       .ndo_open               = adm5120_if_open,
-       .ndo_stop               = adm5120_if_stop,
-       .ndo_start_xmit         = adm5120_if_hard_start_xmit,
-       .ndo_set_rx_mode        = adm5120_if_set_rx_mode,
-       .ndo_do_ioctl           = adm5120_if_do_ioctl,
-       .ndo_tx_timeout         = adm5120_if_tx_timeout,
-       .ndo_validate_addr      = eth_validate_addr,
-       .ndo_change_mtu         = eth_change_mtu,
-       .ndo_set_mac_address    = adm5120_if_set_mac_address,
-};
-
-static struct net_device *adm5120_if_alloc(void)
-{
-       struct net_device *dev;
-       struct adm5120_if_priv *priv;
-
-       dev = alloc_etherdev(sizeof(*priv));
-       if (!dev)
-               return NULL;
-
-       priv = netdev_priv(dev);
-       priv->dev = dev;
-
-       dev->irq                = ADM5120_IRQ_SWITCH;
-       dev->netdev_ops         = &adm5120sw_netdev_ops;
-       dev->watchdog_timeo     = TX_TIMEOUT;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);
-#endif
-
-       return dev;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static void adm5120_switch_cleanup(void)
-{
-       int i;
-
-       /* disable interrupts */
-       sw_int_mask(SWITCH_INTS_ALL);
-
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               struct net_device *dev = adm5120_devs[i];
-               if (dev) {
-                       unregister_netdev(dev);
-                       free_netdev(dev);
-               }
-       }
-
-       adm5120_switch_tx_ring_free();
-       adm5120_switch_rx_ring_free();
-}
-
-static int adm5120_switch_probe(struct platform_device *pdev)
-{
-       u32 t;
-       int i, err;
-
-       adm5120_nrdevs = adm5120_eth_num_ports;
-
-       t = CPUP_CONF_DCPUP | CPUP_CONF_CRCP |
-               SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT |
-               SWITCH_PORTS_NOCPU << CPUP_CONF_DMCP_SHIFT ;
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-       t = (SWITCH_PORTS_NOCPU << PORT_CONF0_EMCP_SHIFT) |
-               (SWITCH_PORTS_NOCPU << PORT_CONF0_BP_SHIFT) |
-               (SWITCH_PORTS_NOCPU);
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       /* setup ports to Autoneg/100M/Full duplex/Auto MDIX */
-       t =  SWITCH_PORTS_PHY |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_SC_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_DC_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) |
-               PHY_CNTL2_RMAE;
-       sw_write_reg(SWITCH_REG_PHY_CNTL2, t);
-
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
-       t |= PHY_CNTL3_RNT;
-       sw_write_reg(SWITCH_REG_PHY_CNTL3, t);
-
-       /* Force all the packets from all ports are low priority */
-       sw_write_reg(SWITCH_REG_PRI_CNTL, 0);
-
-       sw_int_mask(SWITCH_INTS_ALL);
-       sw_int_ack(SWITCH_INTS_ALL);
-
-       err = adm5120_switch_rx_ring_alloc();
-       if (err)
-               goto err;
-
-       err = adm5120_switch_tx_ring_alloc();
-       if (err)
-               goto err;
-
-       adm5120_switch_tx_ring_reset(txl_descs, txl_skbuff, TX_RING_SIZE);
-       adm5120_switch_rx_ring_reset(rxl_descs, rxl_skbuff, RX_RING_SIZE);
-
-       sw_write_reg(SWITCH_REG_SHDA, 0);
-       sw_write_reg(SWITCH_REG_SLDA, KSEG1ADDR(txl_descs));
-       sw_write_reg(SWITCH_REG_RHDA, 0);
-       sw_write_reg(SWITCH_REG_RLDA, KSEG1ADDR(rxl_descs));
-
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               struct net_device *dev;
-               struct adm5120_if_priv *priv;
-
-               dev = adm5120_if_alloc();
-               if (!dev) {
-                       err = -ENOMEM;
-                       goto err;
-               }
-
-               adm5120_devs[i] = dev;
-               priv = netdev_priv(dev);
-
-               priv->vlan_no = i;
-               priv->port_mask = adm5120_eth_vlans[i];
-
-               memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
-               adm5120_write_mac(dev);
-
-               err = register_netdev(dev);
-               if (err) {
-                       SW_INFO("%s register failed, error=%d\n",
-                                       dev->name, err);
-                       goto err;
-               }
-       }
-
-       /* setup vlan/port mapping after devs are filled up */
-       adm5120_set_vlan(adm5120_eth_vlans);
-
-       /* enable CPU port */
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       t &= ~CPUP_CONF_DCPUP;
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-       return 0;
-
-err:
-       adm5120_switch_cleanup();
-
-       SW_ERR("init failed\n");
-       return err;
-}
-
-static int adm5120_switch_remove(struct platform_device *pdev)
-{
-       adm5120_switch_cleanup();
-       return 0;
-}
-
-static struct platform_driver adm5120_switch_driver = {
-       .probe          = adm5120_switch_probe,
-       .remove         = adm5120_switch_remove,
-       .driver         = {
-               .name   = DRV_NAME,
-       },
-};
-
-/* -------------------------------------------------------------------------- */
-
-static int __init adm5120_switch_mod_init(void)
-{
-       int err;
-
-       pr_info(DRV_DESC " version " DRV_VERSION "\n");
-       err = platform_driver_register(&adm5120_switch_driver);
-
-       return err;
-}
-
-static void __exit adm5120_switch_mod_exit(void)
-{
-       platform_driver_unregister(&adm5120_switch_driver);
-}
-
-module_init(adm5120_switch_mod_init);
-module_exit(adm5120_switch_mod_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
diff --git a/target/linux/adm5120/files-3.8/drivers/net/adm5120sw.h b/target/linux/adm5120/files-3.8/drivers/net/adm5120sw.h
deleted file mode 100644 (file)
index fa9e503..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *     Defines for ADM5120 built in ethernet switch driver
- *
- *     Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *
- *     Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
- *     Copyright ADMtek Inc.
- */
-
-#ifndef _INCLUDE_ADM5120SW_H_
-#define _INCLUDE_ADM5120SW_H_
-
-#define SIOCSMATRIX    SIOCDEVPRIVATE
-#define SIOCGMATRIX    (SIOCDEVPRIVATE + 1)
-#define SIOCGADMINFO   (SIOCDEVPRIVATE + 2)
-
-struct adm5120_sw_info {
-       u16     magic;
-       u16     ports;
-       u16     vlan;
-};
-
-#endif /* _INCLUDE_ADM5120SW_H_ */
diff --git a/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-dbg.c b/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-dbg.c
deleted file mode 100644 (file)
index 2d5dc2a..0000000
+++ /dev/null
@@ -1,836 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-dbg.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-static inline char *ed_typestring(int ed_type)
-{
-       switch (ed_type) {
-       case PIPE_CONTROL:
-               return "ctrl";
-       case PIPE_BULK:
-               return "bulk";
-       case PIPE_INTERRUPT:
-               return "intr";
-       case PIPE_ISOCHRONOUS:
-               return "isoc";
-       }
-       return "(bad ed_type)";
-}
-
-static inline char *ed_statestring(int state)
-{
-       switch (state) {
-       case ED_IDLE:
-               return "IDLE";
-       case ED_UNLINK:
-               return "UNLINK";
-       case ED_OPER:
-               return "OPER";
-       }
-       return "?STATE";
-}
-
-static inline char *pipestring(int pipe)
-{
-       return ed_typestring(usb_pipetype(pipe));
-}
-
-static inline char *td_pidstring(u32 info)
-{
-       switch (info & TD_DP) {
-       case TD_DP_SETUP:
-               return "SETUP";
-       case TD_DP_IN:
-               return "IN";
-       case TD_DP_OUT:
-               return "OUT";
-       }
-       return "?PID";
-}
-
-static inline char *td_togglestring(u32 info)
-{
-       switch (info & TD_T) {
-       case TD_T_DATA0:
-               return "DATA0";
-       case TD_T_DATA1:
-               return "DATA1";
-       case TD_T_CARRY:
-               return "CARRY";
-       }
-       return "?TOGGLE";
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header
- */
-static void __attribute__((unused))
-urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status)
-{
-       unsigned int pipe = urb->pipe;
-
-       if (!urb->dev || !urb->dev->bus) {
-               admhc_dbg(ahcd, "%s URB: no dev", str);
-               return;
-       }
-
-#ifndef        ADMHC_VERBOSE_DEBUG
-       if (status != 0)
-#endif
-       admhc_dbg(ahcd, "URB-%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d "
-                       "stat=%d\n",
-                       str,
-                       urb,
-                       usb_pipedevice(pipe),
-                       usb_pipeendpoint(pipe),
-                       usb_pipeout(pipe) ? "out" : "in",
-                       pipestring(pipe),
-                       urb->transfer_flags,
-                       urb->actual_length,
-                       urb->transfer_buffer_length,
-                       status);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       if (!small) {
-               int i, len;
-
-               if (usb_pipecontrol(pipe)) {
-                       admhc_dbg(ahcd, "setup(8):");
-                       for (i = 0; i < 8 ; i++)
-                               printk(KERN_INFO" %02x", ((__u8 *)urb->setup_packet)[i]);
-                       printk(KERN_INFO "\n");
-               }
-               if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) {
-                       admhc_dbg(ahcd, "data(%d/%d):",
-                               urb->actual_length,
-                               urb->transfer_buffer_length);
-                       len = usb_pipeout(pipe) ?
-                                               urb->transfer_buffer_length : urb->actual_length;
-                       for (i = 0; i < 16 && i < len; i++)
-                               printk(KERN_INFO " %02x", ((__u8 *)urb->transfer_buffer)[i]);
-                       printk(KERN_INFO "%s stat:%d\n", i < len ? "..." : "", status);
-               }
-       }
-#endif /* ADMHC_VERBOSE_DEBUG */
-}
-
-#define admhc_dbg_sw(ahcd, next, size, format, arg...) \
-       do { \
-               if (next) { \
-                       unsigned s_len; \
-                       s_len = scnprintf(*next, *size, format, ## arg); \
-                       *size -= s_len; *next += s_len; \
-               } else \
-                       admhc_dbg(ahcd, format, ## arg); \
-       } while (0);
-
-
-static void admhc_dump_intr_mask(struct admhcd *ahcd, char *label, u32 mask,
-               char **next, unsigned *size)
-{
-       admhc_dbg_sw(ahcd, next, size, "%s 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n",
-               label,
-               mask,
-               (mask & ADMHC_INTR_INTA) ? " INTA" : "",
-               (mask & ADMHC_INTR_FATI) ? " FATI" : "",
-               (mask & ADMHC_INTR_SWI) ? " SWI" : "",
-               (mask & ADMHC_INTR_TDC) ? " TDC" : "",
-               (mask & ADMHC_INTR_FNO) ? " FNO" : "",
-               (mask & ADMHC_INTR_SO) ? " SO" : "",
-               (mask & ADMHC_INTR_INSM) ? " INSM" : "",
-               (mask & ADMHC_INTR_BABI) ? " BABI" : "",
-               (mask & ADMHC_INTR_7) ? " !7!" : "",
-               (mask & ADMHC_INTR_6) ? " !6!" : "",
-               (mask & ADMHC_INTR_RESI) ? " RESI" : "",
-               (mask & ADMHC_INTR_SOFI) ? " SOFI" : ""
-               );
-}
-
-static void maybe_print_eds(struct admhcd *ahcd, char *label, u32 value,
-               char **next, unsigned *size)
-{
-       if (value)
-               admhc_dbg_sw(ahcd, next, size, "%s %08x\n", label, value);
-}
-
-static char *buss2string(int state)
-{
-       switch (state) {
-       case ADMHC_BUSS_RESET:
-               return "reset";
-       case ADMHC_BUSS_RESUME:
-               return "resume";
-       case ADMHC_BUSS_OPER:
-               return "operational";
-       case ADMHC_BUSS_SUSPEND:
-               return "suspend";
-       }
-       return "?state";
-}
-
-static void
-admhc_dump_status(struct admhcd *ahcd, char **next, unsigned *size)
-{
-       struct admhcd_regs __iomem *regs = ahcd->regs;
-       u32                     temp;
-
-       temp = admhc_readl(ahcd, &regs->gencontrol);
-       admhc_dbg_sw(ahcd, next, size,
-               "gencontrol 0x%08x%s%s%s%s\n",
-               temp,
-               (temp & ADMHC_CTRL_UHFE) ? " UHFE" : "",
-               (temp & ADMHC_CTRL_SIR) ? " SIR" : "",
-               (temp & ADMHC_CTRL_DMAA) ? " DMAA" : "",
-               (temp & ADMHC_CTRL_SR) ? " SR" : ""
-               );
-
-       temp = admhc_readl(ahcd, &regs->host_control);
-       admhc_dbg_sw(ahcd, next, size,
-               "host_control 0x%08x BUSS=%s%s\n",
-               temp,
-               buss2string(temp & ADMHC_HC_BUSS),
-               (temp & ADMHC_HC_DMAE) ? " DMAE" : ""
-               );
-
-       admhc_dump_intr_mask(ahcd, "int_status",
-                       admhc_readl(ahcd, &regs->int_status),
-                       next, size);
-       admhc_dump_intr_mask(ahcd, "int_enable",
-                       admhc_readl(ahcd, &regs->int_enable),
-                       next, size);
-
-       maybe_print_eds(ahcd, "hosthead",
-                       admhc_readl(ahcd, &regs->hosthead), next, size);
-}
-
-#define dbg_port_sw(hc, num, value, next, size) \
-       admhc_dbg_sw(hc, next, size, \
-               "portstatus [%d] " \
-               "0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               num, temp, \
-               (temp & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (temp & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (temp & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (temp & ADMHC_PS_PESC) ? " PESC" : "", \
-               (temp & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (temp & ADMHC_PS_LSDA) ? " LSDA" : "", \
-               (temp & ADMHC_PS_PPS) ? " PPS" : "", \
-               (temp & ADMHC_PS_PRS) ? " PRS" : "", \
-               (temp & ADMHC_PS_POCI) ? " POCI" : "", \
-               (temp & ADMHC_PS_PSS) ? " PSS" : "", \
-               \
-               (temp & ADMHC_PS_PES) ? " PES" : "", \
-               (temp & ADMHC_PS_CCS) ? " CCS" : "" \
-               );
-
-
-static void
-admhc_dump_roothub(
-       struct admhcd *ahcd,
-       int verbose,
-       char **next,
-       unsigned *size)
-{
-       u32                     temp, i;
-
-       temp = admhc_read_rhdesc(ahcd);
-       if (temp == ~(u32)0)
-               return;
-
-       if (verbose) {
-               admhc_dbg_sw(ahcd, next, size,
-                       "rhdesc %08x%s%s%s%s%s%s PPCM=%02x%s%s%s%s NUMP=%d(%d)\n",
-                       temp,
-                       (temp & ADMHC_RH_CRWE) ? " CRWE" : "",
-                       (temp & ADMHC_RH_OCIC) ? " OCIC" : "",
-                       (temp & ADMHC_RH_LPSC) ? " LPSC" : "",
-                       (temp & ADMHC_RH_LPSC) ? " DRWE" : "",
-                       (temp & ADMHC_RH_LPSC) ? " OCI" : "",
-                       (temp & ADMHC_RH_LPSC) ? " LPS" : "",
-                       ((temp & ADMHC_RH_PPCM) >> 16),
-                       (temp & ADMHC_RH_NOCP) ? " NOCP" : "",
-                       (temp & ADMHC_RH_OCPM) ? " OCPM" : "",
-                       (temp & ADMHC_RH_NPS) ? " NPS" : "",
-                       (temp & ADMHC_RH_PSM) ? " PSM" : "",
-                       (temp & ADMHC_RH_NUMP), ahcd->num_ports
-                       );
-       }
-
-       for (i = 0; i < ahcd->num_ports; i++) {
-               temp = admhc_read_portstatus(ahcd, i);
-               dbg_port_sw(ahcd, i, temp, next, size);
-       }
-}
-
-static void admhc_dump(struct admhcd *ahcd, int verbose)
-{
-       admhc_dbg(ahcd, "ADMHC ahcd state\n");
-
-       /* dumps some of the state we know about */
-       admhc_dump_status(ahcd, NULL, NULL);
-       admhc_dbg(ahcd, "current frame #%04x\n",
-               admhc_frame_no(ahcd));
-
-       admhc_dump_roothub(ahcd, verbose, NULL, NULL);
-}
-
-static const char data0[] = "DATA0";
-static const char data1[] = "DATA1";
-
-static void admhc_dump_td(const struct admhcd *ahcd, const char *label,
-               const struct td *td)
-{
-       u32     tmp;
-
-       admhc_dbg(ahcd, "%s td %p; urb %p index %d; hwNextTD %08x\n",
-               label, td,
-               td->urb, td->index,
-               hc32_to_cpup(ahcd, &td->hwNextTD));
-
-       tmp = hc32_to_cpup(ahcd, &td->hwINFO);
-       admhc_dbg(ahcd, "     status %08x%s CC=%x EC=%d %s %s ISI=%x FN=%x\n",
-               tmp,
-               (tmp & TD_OWN) ? " OWN" : "",
-               TD_CC_GET(tmp),
-               TD_EC_GET(tmp),
-               td_togglestring(tmp),
-               td_pidstring(tmp),
-               TD_ISI_GET(tmp),
-               TD_FN_GET(tmp));
-
-       tmp = hc32_to_cpup(ahcd, &td->hwCBL);
-       admhc_dbg(ahcd, "     dbp %08x; cbl %08x; LEN=%d%s\n",
-               hc32_to_cpup(ahcd, &td->hwDBP),
-               tmp,
-               TD_BL_GET(tmp),
-               (tmp & TD_IE) ? " IE" : "");
-}
-
-/* caller MUST own hcd spinlock if verbose is set! */
-static void __attribute__((unused))
-admhc_dump_ed(const struct admhcd *ahcd, const char *label,
-               const struct ed *ed, int verbose)
-{
-       u32 tmp = hc32_to_cpu(ahcd, ed->hwINFO);
-
-       admhc_dbg(ahcd, "%s ed %p %s type %s; next ed %08x\n",
-               label,
-               ed, ed_statestring(ed->state), ed_typestring(ed->type),
-               hc32_to_cpup(ahcd, &ed->hwNextED));
-
-       admhc_dbg(ahcd, "  info %08x MAX=%d%s%s%s%s EP=%d DEV=%d\n", tmp,
-               ED_MPS_GET(tmp),
-               (tmp & ED_ISO) ? " ISO" : "",
-               (tmp & ED_SKIP) ? " SKIP" : "",
-               (tmp & ED_SPEED_FULL) ? " FULL" : " LOW",
-               (tmp & ED_INT) ? " INT" : "",
-               ED_EN_GET(tmp),
-               ED_FA_GET(tmp));
-
-       tmp = hc32_to_cpup(ahcd, &ed->hwHeadP);
-       admhc_dbg(ahcd, "  tds: head %08x tail %08x %s%s%s\n",
-               tmp & TD_MASK,
-               hc32_to_cpup(ahcd, &ed->hwTailP),
-               (tmp & ED_C) ? data1 : data0,
-               (tmp & ED_H) ? " HALT" : "",
-               verbose ? " td list follows" : " (not listing)");
-
-       if (verbose) {
-               struct list_head        *tmp;
-
-               /* use ed->td_list because HC concurrently modifies
-                * hwNextTD as it accumulates ed_donelist.
-                */
-               list_for_each(tmp, &ed->td_list) {
-                       struct td               *td;
-                       td = list_entry(tmp, struct td, td_list);
-                       admhc_dump_td(ahcd, "  ->", td);
-               }
-       }
-}
-
-#else /* ifdef DEBUG */
-
-static inline void urb_print(struct admhcd *ahcd, struct urb * urb, char * str,
-       int small, int status) {}
-static inline void admhc_dump_ed(const struct admhcd *ahcd, const char *label,
-       const struct ed *ed, int verbose) {}
-static inline void admhc_dump_td(const struct admhcd *ahcd, const char *label,
-       const struct td *td) {}
-static inline void admhc_dump(struct admhcd *ahcd, int verbose) {}
-
-#undef ADMHC_VERBOSE_DEBUG
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef STUB_DEBUG_FILES
-
-static inline void create_debug_files(struct admhcd *bus) { }
-static inline void remove_debug_files(struct admhcd *bus) { }
-
-#else
-
-static int debug_async_open(struct inode *, struct file *);
-static int debug_periodic_open(struct inode *, struct file *);
-static int debug_registers_open(struct inode *, struct file *);
-static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
-static int debug_close(struct inode *, struct file *);
-
-static const struct file_operations debug_async_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_async_open,
-       .read           = debug_output,
-       .release        = debug_close,
-       .llseek         = default_llseek,
-};
-static const struct file_operations debug_periodic_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_periodic_open,
-       .read           = debug_output,
-       .release        = debug_close,
-       .llseek         = default_llseek,
-};
-static const struct file_operations debug_registers_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_registers_open,
-       .read           = debug_output,
-       .release        = debug_close,
-       .llseek         = default_llseek,
-};
-
-static struct dentry *admhc_debug_root;
-
-struct debug_buffer {
-       ssize_t (*fill_func)(struct debug_buffer *);    /* fill method */
-       struct admhcd *ahcd;
-       struct mutex mutex;     /* protect filling of buffer */
-       size_t count;           /* number of characters filled into buffer */
-       char *page;
-};
-
-static ssize_t
-show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
-{
-       unsigned temp;
-       unsigned size = count;
-
-       if (!ed)
-               return 0;
-
-       /* dump a snapshot of the bulk or control schedule */
-       while (ed) {
-               u32 info = hc32_to_cpu(ahcd, ed->hwINFO);
-               u32 headp = hc32_to_cpu(ahcd, ed->hwHeadP);
-               u32 tailp = hc32_to_cpu(ahcd, ed->hwTailP);
-               struct list_head *entry;
-               struct td       *td;
-
-               temp = scnprintf(buf, size,
-                       "ed/%p %s %s %cs dev%d ep%d %s%smax %d %08x%s%s %s"
-                       " h:%08x t:%08x",
-                       ed,
-                       ed_statestring(ed->state),
-                       ed_typestring(ed->type),
-                       (info & ED_SPEED_FULL) ? 'f' : 'l',
-                       info & ED_FA_MASK,
-                       (info >> ED_EN_SHIFT) & ED_EN_MASK,
-                       (info & ED_INT) ? "INT " : "",
-                       (info & ED_ISO) ? "ISO " : "",
-                       (info >> ED_MPS_SHIFT) & ED_MPS_MASK ,
-                       info,
-                       (info & ED_SKIP) ? " S" : "",
-                       (headp & ED_H) ? " H" : "",
-                       (headp & ED_C) ? data1 : data0,
-                       headp & ED_MASK, tailp);
-               size -= temp;
-               buf += temp;
-
-               list_for_each(entry, &ed->td_list) {
-                       u32             dbp, cbl;
-
-                       td = list_entry(entry, struct td, td_list);
-                       info = hc32_to_cpup(ahcd, &td->hwINFO);
-                       dbp = hc32_to_cpup(ahcd, &td->hwDBP);
-                       cbl = hc32_to_cpup(ahcd, &td->hwCBL);
-
-                       temp = scnprintf(buf, size,
-                               "\n\ttd/%p %s %d %s%scc=%x urb %p (%08x,%08x)",
-                               td,
-                               td_pidstring(info),
-                               TD_BL_GET(cbl),
-                               (info & TD_OWN) ? "" : "DONE ",
-                               (cbl & TD_IE) ? "IE " : "",
-                               TD_CC_GET(info), td->urb, info, cbl);
-                       size -= temp;
-                       buf += temp;
-               }
-
-               temp = scnprintf(buf, size, "\n");
-               size -= temp;
-               buf += temp;
-
-               ed = ed->ed_next;
-       }
-
-       return count - size;
-}
-
-static ssize_t fill_async_buffer(struct debug_buffer *buf)
-{
-       struct admhcd           *ahcd;
-       size_t                  temp;
-       unsigned long           flags;
-
-       ahcd = buf->ahcd;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return temp;
-}
-
-
-#define DBG_SCHED_LIMIT 64
-
-static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
-{
-       struct admhcd           *ahcd;
-       struct ed               **seen, *ed;
-       unsigned long           flags;
-       unsigned                temp, size, seen_count;
-       char                    *next;
-       unsigned                i;
-
-       seen = kmalloc(DBG_SCHED_LIMIT * sizeof(*seen), GFP_ATOMIC);
-       if (!seen)
-               return 0;
-       seen_count = 0;
-
-       ahcd = buf->ahcd;
-       next = buf->page;
-       size = PAGE_SIZE;
-
-       temp = scnprintf(next, size, "size = %d\n", NUM_INTS);
-       size -= temp;
-       next += temp;
-
-       /* dump a snapshot of the periodic schedule (and load) */
-       spin_lock_irqsave(&ahcd->lock, flags);
-       for (i = 0; i < NUM_INTS; i++) {
-               ed = ahcd->periodic[i];
-               if (!ed)
-                       continue;
-
-               temp = scnprintf(next, size, "%2d [%3d]:", i, ahcd->load[i]);
-               size -= temp;
-               next += temp;
-
-               do {
-                       temp = scnprintf(next, size, " ed%d/%p",
-                               ed->interval, ed);
-                       size -= temp;
-                       next += temp;
-                       for (temp = 0; temp < seen_count; temp++) {
-                               if (seen[temp] == ed)
-                                       break;
-                       }
-
-                       /* show more info the first time around */
-                       if (temp == seen_count) {
-                               u32     info = hc32_to_cpu(ahcd, ed->hwINFO);
-                               struct list_head        *entry;
-                               unsigned                qlen = 0;
-
-                               /* qlen measured here in TDs, not urbs */
-                               list_for_each(entry, &ed->td_list)
-                                       qlen++;
-                               temp = scnprintf(next, size,
-                                       " (%cs dev%d ep%d%s qlen %u"
-                                       " max %d %08x%s%s)",
-                                       (info & ED_SPEED_FULL) ? 'f' : 'l',
-                                       ED_FA_GET(info),
-                                       ED_EN_GET(info),
-                                       (info & ED_ISO) ? "iso" : "int",
-                                       qlen,
-                                       ED_MPS_GET(info),
-                                       info,
-                                       (info & ED_SKIP) ? " K" : "",
-                                       (ed->hwHeadP &
-                                               cpu_to_hc32(ahcd, ED_H)) ?
-                                                       " H" : "");
-                               size -= temp;
-                               next += temp;
-
-                               if (seen_count < DBG_SCHED_LIMIT)
-                                       seen[seen_count++] = ed;
-
-                               ed = ed->ed_next;
-
-                       } else {
-                               /* we've seen it and what's after */
-                               temp = 0;
-                               ed = NULL;
-                       }
-
-               } while (ed);
-
-               temp = scnprintf(next, size, "\n");
-               size -= temp;
-               next += temp;
-       }
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       kfree(seen);
-
-       return PAGE_SIZE - size;
-}
-
-
-#undef DBG_SCHED_LIMIT
-
-static ssize_t fill_registers_buffer(struct debug_buffer *buf)
-{
-       struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct admhcd_regs __iomem *regs;
-       unsigned long           flags;
-       unsigned                temp, size;
-       char                    *next;
-       u32                     rdata;
-
-       ahcd = buf->ahcd;
-       hcd = admhc_to_hcd(ahcd);
-       regs = ahcd->regs;
-       next = buf->page;
-       size = PAGE_SIZE;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       /* dump driver info, then registers in spec order */
-
-       admhc_dbg_sw(ahcd, &next, &size,
-               "bus %s, device %s\n"
-               "%s\n"
-               "%s\n",
-               hcd->self.controller->bus->name,
-               dev_name(hcd->self.controller),
-               hcd->product_desc,
-               hcd_name);
-
-       if (!HCD_HW_ACCESSIBLE(hcd)) {
-               size -= scnprintf(next, size,
-                       "SUSPENDED (no register access)\n");
-               goto done;
-       }
-
-       admhc_dump_status(ahcd, &next, &size);
-
-       /* other registers mostly affect frame timings */
-       rdata = admhc_readl(ahcd, &regs->fminterval);
-       temp = scnprintf(next, size,
-                       "fmintvl 0x%08x %sFSLDP=0x%04x FI=0x%04x\n",
-                       rdata, (rdata & ADMHC_SFI_FIT) ? "FIT " : "",
-                       (rdata >> ADMHC_SFI_FSLDP_SHIFT) & ADMHC_SFI_FSLDP_MASK,
-                       rdata  & ADMHC_SFI_FI_MASK);
-       size -= temp;
-       next += temp;
-
-       rdata = admhc_readl(ahcd, &regs->fmnumber);
-       temp = scnprintf(next, size, "fmnumber 0x%08x %sFR=0x%04x FN=%04x\n",
-                       rdata, (rdata & ADMHC_SFN_FRT) ? "FRT " : "",
-                       (rdata >> ADMHC_SFN_FR_SHIFT) & ADMHC_SFN_FR_MASK,
-                       rdata  & ADMHC_SFN_FN_MASK);
-       size -= temp;
-       next += temp;
-
-       /* TODO: use predefined bitmask */
-       rdata = admhc_readl(ahcd, &regs->lsthresh);
-       temp = scnprintf(next, size, "lsthresh 0x%04x\n",
-                       rdata & 0x3fff);
-       size -= temp;
-       next += temp;
-
-       temp = scnprintf(next, size, "hub poll timer: %s\n",
-                       admhcd_to_hcd(ahcd)->poll_rh ? "ON" : "OFF");
-       size -= temp;
-       next += temp;
-
-       /* roothub */
-       admhc_dump_roothub(ahcd, 1, &next, &size);
-
-done:
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       return PAGE_SIZE - size;
-}
-
-
-static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
-                               ssize_t (*fill_func)(struct debug_buffer *))
-{
-       struct debug_buffer *buf;
-
-       buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
-
-       if (buf) {
-               buf->ahcd = ahcd;
-               buf->fill_func = fill_func;
-               mutex_init(&buf->mutex);
-       }
-
-       return buf;
-}
-
-static int fill_buffer(struct debug_buffer *buf)
-{
-       int ret = 0;
-
-       if (!buf->page)
-               buf->page = (char *)get_zeroed_page(GFP_KERNEL);
-
-       if (!buf->page) {
-               ret = -ENOMEM;
-               goto out;
-       }
-
-       ret = buf->fill_func(buf);
-
-       if (ret >= 0) {
-               buf->count = ret;
-               ret = 0;
-       }
-
-out:
-       return ret;
-}
-
-static ssize_t debug_output(struct file *file, char __user *user_buf,
-                       size_t len, loff_t *offset)
-{
-       struct debug_buffer *buf = file->private_data;
-       int ret = 0;
-
-       mutex_lock(&buf->mutex);
-       if (buf->count == 0) {
-               ret = fill_buffer(buf);
-               if (ret != 0) {
-                       mutex_unlock(&buf->mutex);
-                       goto out;
-               }
-       }
-       mutex_unlock(&buf->mutex);
-
-       ret = simple_read_from_buffer(user_buf, len, offset,
-                                       buf->page, buf->count);
-
-out:
-       return ret;
-}
-
-static int debug_close(struct inode *inode, struct file *file)
-{
-       struct debug_buffer *buf = file->private_data;
-
-       if (buf) {
-               if (buf->page)
-                       free_page((unsigned long)buf->page);
-               kfree(buf);
-       }
-
-       return 0;
-}
-
-static int debug_async_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static int debug_periodic_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private,
-                                               fill_periodic_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static int debug_registers_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private,
-                                               fill_registers_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static inline void create_debug_files(struct admhcd *ahcd)
-{
-       struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
-
-       ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
-       if (!ahcd->debug_dir)
-               goto dir_error;
-
-       ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
-                                               ahcd->debug_dir, ahcd,
-                                               &debug_async_fops);
-       if (!ahcd->debug_async)
-               goto async_error;
-
-       ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
-                                               ahcd->debug_dir, ahcd,
-                                               &debug_periodic_fops);
-       if (!ahcd->debug_periodic)
-               goto periodic_error;
-
-       ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
-                                               ahcd->debug_dir, ahcd,
-                                               &debug_registers_fops);
-       if (!ahcd->debug_registers)
-               goto registers_error;
-
-       admhc_dbg(ahcd, "created debug files\n");
-       return;
-
-registers_error:
-       debugfs_remove(ahcd->debug_periodic);
-periodic_error:
-       debugfs_remove(ahcd->debug_async);
-async_error:
-       debugfs_remove(ahcd->debug_dir);
-dir_error:
-       ahcd->debug_periodic = NULL;
-       ahcd->debug_async = NULL;
-       ahcd->debug_dir = NULL;
-}
-
-static inline void remove_debug_files(struct admhcd *ahcd)
-{
-       debugfs_remove(ahcd->debug_registers);
-       debugfs_remove(ahcd->debug_periodic);
-       debugfs_remove(ahcd->debug_async);
-       debugfs_remove(ahcd->debug_dir);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
diff --git a/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-drv.c b/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-drv.c
deleted file mode 100644 (file)
index 798fd22..0000000
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-au1xxx.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *   (C) Copyright 2002 Hewlett-Packard Company
- *
- *   Written by Christopher Hoover <ch@hpl.hp.com>
- *   Based on fragments of previous driver by Russell King et al.
- *
- *   Modified for LH7A404 from ahcd-sa1111.c
- *    by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *   Modified for AMD Alchemy Au1xxx
- *    by Matt Porter <mporter@kernel.crashing.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-#ifdef DEBUG
-#define HCD_DBG(f, a...)       printk(KERN_DEBUG "%s: " f, hcd_name, ## a)
-#else
-#define HCD_DBG(f, a...)       do {} while (0)
-#endif
-#define HCD_ERR(f, a...)       printk(KERN_ERR "%s: " f, hcd_name, ## a)
-#define HCD_INFO(f, a...)      printk(KERN_INFO "%s: " f, hcd_name, ## a)
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_adm5120_probe(const struct hc_driver *driver,
-                 struct platform_device *dev)
-{
-       int retval;
-       struct usb_hcd *hcd;
-       int irq;
-       struct resource *regs;
-
-       /* sanity checks */
-       regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
-       if (!regs) {
-               HCD_DBG("no IOMEM resource found\n");
-               return -ENODEV;
-       }
-
-       irq = platform_get_irq(dev, 0);
-       if (irq < 0) {
-               HCD_DBG("no IRQ resource found\n");
-               return -ENODEV;
-       }
-
-       hcd = usb_create_hcd(driver, &dev->dev, "ADM5120");
-       if (!hcd)
-               return -ENOMEM;
-
-       hcd->rsrc_start = regs->start;
-       hcd->rsrc_len = regs->end - regs->start + 1;
-
-       if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-               HCD_DBG("request_mem_region failed\n");
-               retval = -EBUSY;
-               goto err_dev;
-       }
-
-       hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-       if (!hcd->regs) {
-               HCD_DBG("ioremap failed\n");
-               retval = -ENOMEM;
-               goto err_mem;
-       }
-
-       admhc_hcd_init(hcd_to_admhcd(hcd));
-
-       retval = usb_add_hcd(hcd, irq, 0);
-       if (retval)
-               goto err_io;
-
-       return 0;
-
-err_io:
-       iounmap(hcd->regs);
-err_mem:
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err_dev:
-       usb_put_hcd(hcd);
-       return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-static void admhc_adm5120_remove(struct usb_hcd *hcd,
-               struct platform_device *dev)
-{
-       usb_remove_hcd(hcd);
-       iounmap(hcd->regs);
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-       usb_put_hcd(hcd);
-}
-
-static int admhc_adm5120_start(struct usb_hcd *hcd)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             ret;
-
-       ret = admhc_init(ahcd);
-       if (ret < 0) {
-               HCD_ERR("unable to init %s\n", hcd->self.bus_name);
-               goto err;
-       }
-
-       ret = admhc_run(ahcd);
-       if (ret < 0) {
-               HCD_ERR("unable to run %s\n", hcd->self.bus_name);
-               goto err_stop;
-       }
-
-       return 0;
-
-err_stop:
-       admhc_stop(hcd);
-err:
-       return ret;
-}
-
-static const struct hc_driver adm5120_hc_driver = {
-       .description =          hcd_name,
-       .product_desc =         "ADM5120 built-in USB 1.1 Host Controller",
-       .hcd_priv_size =        sizeof(struct admhcd),
-
-       /*
-        * generic hardware linkage
-        */
-       .irq =                  admhc_irq,
-       .flags =                HCD_USB11 | HCD_MEMORY,
-
-       /*
-        * basic lifecycle operations
-        */
-       .start =                admhc_adm5120_start,
-       .stop =                 admhc_stop,
-       .shutdown =             admhc_shutdown,
-
-       /*
-        * managing i/o requests and associated device resources
-        */
-       .urb_enqueue =          admhc_urb_enqueue,
-       .urb_dequeue =          admhc_urb_dequeue,
-       .endpoint_disable =     admhc_endpoint_disable,
-
-       /*
-        * scheduling support
-        */
-       .get_frame_number =     admhc_get_frame_number,
-
-       /*
-        * root hub support
-        */
-       .hub_status_data =      admhc_hub_status_data,
-       .hub_control =          admhc_hub_control,
-#ifdef CONFIG_PM
-       .bus_suspend =          admhc_bus_suspend,
-       .bus_resume =           admhc_bus_resume,
-#endif
-       .start_port_reset =     admhc_start_port_reset,
-};
-
-static int usb_hcd_adm5120_probe(struct platform_device *pdev)
-{
-       int ret;
-
-       ret = admhc_adm5120_probe(&adm5120_hc_driver, pdev);
-
-       return ret;
-}
-
-static int usb_hcd_adm5120_remove(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-       admhc_adm5120_remove(hcd, pdev);
-
-       return 0;
-}
-
-#ifdef CONFIG_PM
-/* TODO */
-static int usb_hcd_adm5120_suspend(struct platform_device *dev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-       return 0;
-}
-
-static int usb_hcd_adm5120_resume(struct platform_device *dev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-       return 0;
-}
-#else
-#define usb_hcd_adm5120_suspend        NULL
-#define usb_hcd_adm5120_resume NULL
-#endif /* CONFIG_PM */
-
-static struct platform_driver usb_hcd_adm5120_driver = {
-       .probe          = usb_hcd_adm5120_probe,
-       .remove         = usb_hcd_adm5120_remove,
-       .shutdown       = usb_hcd_platform_shutdown,
-       .suspend        = usb_hcd_adm5120_suspend,
-       .resume         = usb_hcd_adm5120_resume,
-       .driver         = {
-               .name   = "adm5120-hcd",
-               .owner  = THIS_MODULE,
-       },
-};
-
diff --git a/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-hcd.c
deleted file mode 100644 (file)
index f721ec1..0000000
+++ /dev/null
@@ -1,843 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-hcd.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *   [ Initialisation is based on Linus'  ]
- *   [ uhci code and gregs ahcd fragments ]
- *   [ (C) Copyright 1999 Linus Torvalds  ]
- *   [ (C) Copyright 1999 Gregory P. Smith]
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/hcd.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/debugfs.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-
-#define DRIVER_VERSION "0.27.0"
-#define DRIVER_AUTHOR  "Gabor Juhos <juhosg@openwrt.org>"
-#define DRIVER_DESC    "ADMtek USB 1.1 Host Controller Driver"
-
-/*-------------------------------------------------------------------------*/
-
-#undef ADMHC_VERBOSE_DEBUG     /* not always helpful */
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define        OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
-
-#define        ADMHC_INTR_INIT \
-               (ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
-               | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI)
-
-/*-------------------------------------------------------------------------*/
-
-static const char hcd_name[] = "admhc-hcd";
-
-#define        STATECHANGE_DELAY       msecs_to_jiffies(300)
-
-#include "adm5120.h"
-
-static void admhc_dump(struct admhcd *ahcd, int verbose);
-static int admhc_init(struct admhcd *ahcd);
-static void admhc_stop(struct usb_hcd *hcd);
-
-#include "adm5120-dbg.c"
-#include "adm5120-mem.c"
-#include "adm5120-pm.c"
-#include "adm5120-hub.c"
-#include "adm5120-q.c"
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * queue up an urb for anything except the root hub
- */
-static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
-               gfp_t mem_flags)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       struct ed       *ed;
-       struct urb_priv *urb_priv;
-       unsigned int    pipe = urb->pipe;
-       int             td_cnt = 0;
-       unsigned long   flags;
-       int             ret = 0;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       spin_lock_irqsave(&ahcd->lock, flags);
-       urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-#endif
-
-       /* every endpoint has an ed, locate and maybe (re)initialize it */
-       ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
-       if (!ed)
-               return -ENOMEM;
-
-       /* for the private part of the URB we need the number of TDs */
-       switch (ed->type) {
-       case PIPE_CONTROL:
-               if (urb->transfer_buffer_length > TD_DATALEN_MAX)
-                       /* td_submit_urb() doesn't yet handle these */
-                       return -EMSGSIZE;
-
-               /* 1 TD for setup, 1 for ACK, plus ... */
-               td_cnt = 2;
-               /* FALLTHROUGH */
-       case PIPE_BULK:
-               /* one TD for every 4096 Bytes (can be up to 8K) */
-               td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX;
-               /* ... and for any remaining bytes ... */
-               if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
-                       td_cnt++;
-               /* ... and maybe a zero length packet to wrap it up */
-               if (td_cnt == 0)
-                       td_cnt++;
-               else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
-                       && (urb->transfer_buffer_length
-                               % usb_maxpacket(urb->dev, pipe,
-                                       usb_pipeout(pipe))) == 0)
-                       td_cnt++;
-               break;
-       case PIPE_INTERRUPT:
-               /*
-                * for Interrupt IN/OUT transactions, each ED contains
-                * only 1 TD.
-                * TODO: check transfer_buffer_length?
-                */
-               td_cnt = 1;
-               break;
-       case PIPE_ISOCHRONOUS:
-               /* number of packets from URB */
-               td_cnt = urb->number_of_packets;
-               break;
-       }
-
-       urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
-       if (!urb_priv)
-               return -ENOMEM;
-
-       urb_priv->ed = ed;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       /* don't submit to a dead HC */
-       if (!HCD_HW_ACCESSIBLE(hcd)) {
-               ret = -ENODEV;
-               goto fail;
-       }
-       if (!HC_IS_RUNNING(hcd->state)) {
-               ret = -ENODEV;
-               goto fail;
-       }
-
-       ret = usb_hcd_link_urb_to_ep(hcd, urb);
-       if (ret)
-               goto fail;
-
-       /* schedule the ed if needed */
-       if (ed->state == ED_IDLE) {
-               ret = ed_schedule(ahcd, ed);
-               if (ret < 0) {
-                       usb_hcd_unlink_urb_from_ep(hcd, urb);
-                       goto fail;
-               }
-               if (ed->type == PIPE_ISOCHRONOUS) {
-                       u16     frame = admhc_frame_no(ahcd);
-
-                       /* delay a few frames before the first TD */
-                       frame += max_t (u16, 8, ed->interval);
-                       frame &= ~(ed->interval - 1);
-                       frame |= ed->branch;
-                       urb->start_frame = frame;
-
-                       /* yes, only URB_ISO_ASAP is supported, and
-                        * urb->start_frame is never used as input.
-                        */
-               }
-       } else if (ed->type == PIPE_ISOCHRONOUS)
-               urb->start_frame = ed->last_iso + ed->interval;
-
-       /* fill the TDs and link them to the ed; and
-        * enable that part of the schedule, if needed
-        * and update count of queued periodic urbs
-        */
-       urb->hcpriv = urb_priv;
-       td_submit_urb(ahcd, urb);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
-#endif
-
-fail:
-       if (ret)
-               urb_priv_free(ahcd, urb_priv);
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       return ret;
-}
-
-/*
- * decouple the URB from the HC queues (TDs, urb_priv);
- * reporting is always done
- * asynchronously, and we might be dealing with an urb that's
- * partially transferred, or an ED with other urbs being unlinked.
- */
-static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
-               int status)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       unsigned long flags;
-       int ret;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       urb_print(ahcd, urb, "DEQUEUE", 1, status);
-#endif
-       ret = usb_hcd_check_unlink_urb(hcd, urb, status);
-       if (ret) {
-               /* Do nothing */
-               ;
-       } else if (HC_IS_RUNNING(hcd->state)) {
-               struct urb_priv *urb_priv;
-
-               /* Unless an IRQ completed the unlink while it was being
-                * handed to us, flag it for unlink and giveback, and force
-                * some upcoming INTR_SF to call finish_unlinks()
-                */
-               urb_priv = urb->hcpriv;
-               if (urb_priv) {
-                       if (urb_priv->ed->state == ED_OPER)
-                               start_ed_unlink(ahcd, urb_priv->ed);
-               }
-       } else {
-               /*
-                * with HC dead, we won't respect hc queue pointers
-                * any more ... just clean up every urb's memory.
-                */
-               if (urb->hcpriv)
-                       finish_urb(ahcd, urb, status);
-       }
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* frees config/altsetting state for endpoints,
- * including ED memory, dummy TD, and bulk/intr data toggle
- */
-
-static void admhc_endpoint_disable(struct usb_hcd *hcd,
-               struct usb_host_endpoint *ep)
-{
-       struct admhcd           *ahcd = hcd_to_admhcd(hcd);
-       unsigned long           flags;
-       struct ed               *ed = ep->hcpriv;
-       unsigned                limit = 1000;
-
-       /* ASSERT:  any requests/urbs are being unlinked */
-       /* ASSERT:  nobody can be submitting urbs for this any more */
-
-       if (!ed)
-               return;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       spin_lock_irqsave(&ahcd->lock, flags);
-       admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-#endif
-
-rescan:
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       if (!HC_IS_RUNNING(hcd->state)) {
-sanitize:
-               ed->state = ED_IDLE;
-               finish_unlinks(ahcd, 0);
-       }
-
-       switch (ed->state) {
-       case ED_UNLINK:         /* wait for hw to finish? */
-               /* major IRQ delivery trouble loses INTR_SOFI too... */
-               if (limit-- == 0) {
-                       admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
-                       goto sanitize;
-               }
-               spin_unlock_irqrestore(&ahcd->lock, flags);
-               schedule_timeout_uninterruptible(1);
-               goto rescan;
-       case ED_IDLE:           /* fully unlinked */
-               if (list_empty(&ed->td_list)) {
-                       td_free(ahcd, ed->dummy);
-                       ed_free(ahcd, ed);
-                       break;
-               }
-               /* else FALL THROUGH */
-       default:
-               /* caller was supposed to have unlinked any requests;
-                * that's not our job.  can't recover; must leak ed.
-                */
-               admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n",
-                       ed, ep->desc.bEndpointAddress, ed->state,
-                       list_empty(&ed->td_list) ? "" : " (has tds)");
-               td_free(ahcd, ed->dummy);
-               break;
-       }
-
-       ep->hcpriv = NULL;
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-}
-
-static int admhc_get_frame_number(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
-       return admhc_frame_no(ahcd);
-}
-
-static void admhc_usb_reset(struct admhcd *ahcd)
-{
-#if 0
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-       ahcd->hc_control &= OHCI_CTRL_RWC;
-       admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control);
-#else
-       /* FIXME */
-       ahcd->host_control = ADMHC_BUSS_RESET;
-       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-#endif
-}
-
-/* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
- * other cases where the next software may expect clean state from the
- * "firmware".  this is bus-neutral, unlike shutdown() methods.
- */
-static void
-admhc_shutdown(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd;
-
-       ahcd = hcd_to_admhcd(hcd);
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-       admhc_dma_disable(ahcd);
-       admhc_usb_reset(ahcd);
-       /* flush the writes */
-       admhc_writel_flush(ahcd);
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-static void admhc_eds_cleanup(struct admhcd *ahcd)
-{
-       if (ahcd->ed_tails[PIPE_INTERRUPT]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
-               ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
-               ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_CONTROL]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
-               ahcd->ed_tails[PIPE_CONTROL] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_BULK]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
-               ahcd->ed_tails[PIPE_BULK] = NULL;
-       }
-
-       ahcd->ed_head = NULL;
-}
-
-#define ED_DUMMY_INFO  (ED_SPEED_FULL | ED_SKIP)
-
-static int admhc_eds_init(struct admhcd *ahcd)
-{
-       struct ed *ed;
-
-       ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_INTERRUPT] = ed;
-
-       ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
-       ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
-       ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_CONTROL] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
-       ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
-       ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_BULK] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
-       ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
-       ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
-       admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
-       admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
-       admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
-#endif
-
-       return 0;
-
-err:
-       admhc_eds_cleanup(ahcd);
-       return -ENOMEM;
-}
-
-/* init memory, and kick BIOS/SMM off */
-
-static int admhc_init(struct admhcd *ahcd)
-{
-       struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
-       int ret;
-
-       admhc_disable(ahcd);
-       ahcd->regs = hcd->regs;
-
-       /* Disable HC interrupts */
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-
-       /* Read the number of ports unless overridden */
-       if (ahcd->num_ports == 0)
-               ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
-
-       ret = admhc_mem_init(ahcd);
-       if (ret)
-               goto err;
-
-       /* init dummy endpoints */
-       ret = admhc_eds_init(ahcd);
-       if (ret)
-               goto err;
-
-       create_debug_files(ahcd);
-
-       return 0;
-
-err:
-       admhc_stop(hcd);
-       return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * resets USB and controller
- * enable interrupts
- */
-static int admhc_run(struct admhcd *ahcd)
-{
-       u32                     val;
-       int                     first = ahcd->fminterval == 0;
-       struct usb_hcd          *hcd = admhcd_to_hcd(ahcd);
-
-       admhc_disable(ahcd);
-
-       /* boot firmware should have set this up (5.1.1.3.1) */
-       if (first) {
-               val = admhc_readl(ahcd, &ahcd->regs->fminterval);
-               ahcd->fminterval = val & ADMHC_SFI_FI_MASK;
-               if (ahcd->fminterval != FI)
-                       admhc_dbg(ahcd, "fminterval delta %d\n",
-                               ahcd->fminterval - FI);
-               ahcd->fminterval |=
-                       (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
-               /* also: power/overcurrent flags in rhdesc */
-       }
-
-#if 0  /* TODO: not applicable */
-       /* Reset USB nearly "by the book".  RemoteWakeupConnected has
-        * to be checked in case boot firmware (BIOS/SMM/...) has set up
-        * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
-        * If the bus glue detected wakeup capability then it should
-        * already be enabled; if so we'll just enable it again.
-        */
-       if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0)
-               device_set_wakeup_capable(hcd->self.controller, 1);
-#endif
-
-       switch (ahcd->host_control & ADMHC_HC_BUSS) {
-       case ADMHC_BUSS_OPER:
-               val = 0;
-               break;
-       case ADMHC_BUSS_SUSPEND:
-               /* FALLTHROUGH ? */
-       case ADMHC_BUSS_RESUME:
-               ahcd->host_control = ADMHC_BUSS_RESUME;
-               val = 10 /* msec wait */;
-               break;
-       /* case ADMHC_BUSS_RESET: */
-       default:
-               ahcd->host_control = ADMHC_BUSS_RESET;
-               val = 50 /* msec wait */;
-               break;
-       }
-       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-
-       /* flush the writes */
-       admhc_writel_flush(ahcd);
-
-       msleep(val);
-       val = admhc_read_rhdesc(ahcd);
-       if (!(val & ADMHC_RH_NPS)) {
-               /* power down each port */
-               for (val = 0; val < ahcd->num_ports; val++)
-                       admhc_write_portstatus(ahcd, val, ADMHC_PS_CPP);
-       }
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* 2msec timelimit here means no irqs/preempt */
-       spin_lock_irq(&ahcd->lock);
-
-       admhc_writel(ahcd, ADMHC_CTRL_SR,  &ahcd->regs->gencontrol);
-       val = 30;       /* ... allow extra time */
-       while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
-               if (--val == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "USB HC reset timed out!\n");
-                       return -1;
-               }
-               udelay(1);
-       }
-
-       /* enable HOST mode, before access any host specific register */
-       admhc_writel(ahcd, ADMHC_CTRL_UHFE,  &ahcd->regs->gencontrol);
-
-       /* Tell the controller where the descriptor list is */
-       admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
-
-       periodic_reinit(ahcd);
-
-       /* use rhsc irqs after khubd is fully initialized */
-       set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-       hcd->uses_new_polling = 1;
-
-#if 0
-       /* wake on ConnectStatusChange, matching external hubs */
-       admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
-#else
-       /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
-#endif
-
-       /* Choose the interrupts we care about now, others later on demand */
-       admhc_intr_ack(ahcd, ~0);
-       admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
-
-       admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
-
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* start controller operations */
-       ahcd->host_control = ADMHC_BUSS_OPER;
-       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-
-       val = 20;
-       while ((admhc_readl(ahcd, &ahcd->regs->host_control)
-                       & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
-               if (--val == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "unable to setup operational mode!\n");
-                       return -1;
-               }
-               mdelay(1);
-       }
-
-       hcd->state = HC_STATE_RUNNING;
-
-       ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-
-#if 0
-       /* FIXME: enabling DMA is always failed here for an unknown reason */
-       admhc_dma_enable(ahcd);
-
-       val = 200;
-       while ((admhc_readl(ahcd, &ahcd->regs->host_control)
-                       & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
-               if (--val == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "unable to enable DMA!\n");
-                       admhc_dump(ahcd, 1);
-                       return -1;
-               }
-               mdelay(1);
-       }
-
-#endif
-
-       spin_unlock_irq(&ahcd->lock);
-
-       mdelay(ADMHC_POTPGT);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static irqreturn_t admhc_irq(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       struct admhcd_regs __iomem *regs = ahcd->regs;
-       u32 ints;
-
-       ints = admhc_readl(ahcd, &regs->int_status);
-       if ((ints & ADMHC_INTR_INTA) == 0) {
-               /* no unmasked interrupt status is set */
-               return IRQ_NONE;
-       }
-
-       ints &= admhc_readl(ahcd, &regs->int_enable);
-
-       if (ints & ADMHC_INTR_FATI) {
-               /* e.g. due to PCI Master/Target Abort */
-               admhc_disable(ahcd);
-               admhc_err(ahcd, "Fatal Error, controller disabled\n");
-               admhc_dump(ahcd, 1);
-               admhc_usb_reset(ahcd);
-       }
-
-       if (ints & ADMHC_INTR_BABI) {
-               admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
-               admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
-               admhc_err(ahcd, "Babble Detected\n");
-       }
-
-       if (ints & ADMHC_INTR_INSM) {
-               admhc_vdbg(ahcd, "Root Hub Status Change\n");
-               ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-               admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
-
-               /* NOTE: Vendors didn't always make the same implementation
-                * choices for RHSC.  Many followed the spec; RHSC triggers
-                * on an edge, like setting and maybe clearing a port status
-                * change bit.  With others it's level-triggered, active
-                * until khubd clears all the port status change bits.  We'll
-                * always disable it here and rely on polling until khubd
-                * re-enables it.
-                */
-               admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
-               usb_hcd_poll_rh_status(hcd);
-       } else if (ints & ADMHC_INTR_RESI) {
-               /* For connect and disconnect events, we expect the controller
-                * to turn on RHSC along with RD.  But for remote wakeup events
-                * this might not happen.
-                */
-               admhc_vdbg(ahcd, "Resume Detect\n");
-               admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
-               set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-               if (ahcd->autostop) {
-                       spin_lock(&ahcd->lock);
-                       admhc_rh_resume(ahcd);
-                       spin_unlock(&ahcd->lock);
-               } else
-                       usb_hcd_resume_root_hub(hcd);
-       }
-
-       if (ints & ADMHC_INTR_TDC) {
-               admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
-               admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
-               if (HC_IS_RUNNING(hcd->state))
-                       admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
-               spin_lock(&ahcd->lock);
-               admhc_td_complete(ahcd);
-               spin_unlock(&ahcd->lock);
-               if (HC_IS_RUNNING(hcd->state))
-                       admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
-       }
-
-       if (ints & ADMHC_INTR_SO) {
-               /* could track INTR_SO to reduce available PCI/... bandwidth */
-               admhc_vdbg(ahcd, "Schedule Overrun\n");
-       }
-
-#if 1
-       spin_lock(&ahcd->lock);
-       if (ahcd->ed_rm_list)
-               finish_unlinks(ahcd, admhc_frame_no(ahcd));
-
-       if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list
-                       && HC_IS_RUNNING(hcd->state))
-               admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
-       spin_unlock(&ahcd->lock);
-#else
-       if (ints & ADMHC_INTR_SOFI) {
-               admhc_vdbg(ahcd, "Start Of Frame\n");
-               spin_lock(&ahcd->lock);
-
-               /* handle any pending ED removes */
-               finish_unlinks(ahcd, admhc_frameno(ahcd));
-
-               /* leaving INTR_SOFI enabled when there's still unlinking
-                * to be done in the (next frame).
-                */
-               if ((ahcd->ed_rm_list == NULL) ||
-                       HC_IS_RUNNING(hcd->state) == 0)
-                       /*
-                        * disable INTR_SOFI if there are no unlinking to be
-                        * done (in the next frame)
-                        */
-                       admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
-
-               spin_unlock(&ahcd->lock);
-       }
-#endif
-
-       if (HC_IS_RUNNING(hcd->state)) {
-               admhc_intr_ack(ahcd, ints);
-               admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
-               admhc_writel_flush(ahcd);
-       }
-
-       return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void admhc_stop(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
-       admhc_dump(ahcd, 1);
-
-       flush_scheduled_work();
-
-       admhc_usb_reset(ahcd);
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-
-       free_irq(hcd->irq, hcd);
-       hcd->irq = -1;
-
-       remove_debug_files(ahcd);
-       admhc_eds_cleanup(ahcd);
-       admhc_mem_cleanup(ahcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_ADM5120
-#include "adm5120-drv.c"
-#define PLATFORM_DRIVER                usb_hcd_adm5120_driver
-#endif
-
-#if    !defined(PLATFORM_DRIVER)
-#error "missing bus glue for admhc-hcd"
-#endif
-
-#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
-
-static int __init admhc_hcd_mod_init(void)
-{
-       int ret = 0;
-
-       if (usb_disabled())
-               return -ENODEV;
-
-       pr_info("%s: " DRIVER_INFO "\n", hcd_name);
-       pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
-               sizeof(struct ed), sizeof(struct td));
-       set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
-
-#ifdef DEBUG
-       admhc_debug_root = debugfs_create_dir("admhc", usb_debug_root);
-       if (!admhc_debug_root) {
-               ret = -ENOENT;
-               goto error_debug;
-       }
-#endif
-
-#ifdef PLATFORM_DRIVER
-       ret = platform_driver_register(&PLATFORM_DRIVER);
-       if (ret < 0)
-               goto error_platform;
-#endif
-
-       return ret;
-
-#ifdef PLATFORM_DRIVER
-       platform_driver_unregister(&PLATFORM_DRIVER);
-error_platform:
-#endif
-
-#ifdef DEBUG
-       debugfs_remove(admhc_debug_root);
-       admhc_debug_root = NULL;
-error_debug:
-#endif
-       clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
-       return ret;
-}
-module_init(admhc_hcd_mod_init);
-
-static void __exit admhc_hcd_mod_exit(void)
-{
-       platform_driver_unregister(&PLATFORM_DRIVER);
-#ifdef DEBUG
-       debugfs_remove(admhc_debug_root);
-#endif
-       clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
-}
-module_exit(admhc_hcd_mod_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_INFO);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-hub.c b/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-hub.c
deleted file mode 100644 (file)
index 8cabaf9..0000000
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-hub.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * ADM5120 Root Hub ... the nonsharable stuff
- */
-
-#define dbg_port(hc, label, num, value) \
-       admhc_dbg(hc, \
-               "%s port%d " \
-               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               label, num, value, \
-               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (value & ADMHC_PS_PESC) ? " PESC" : "", \
-               (value & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (value & ADMHC_PS_LSDA) ? " LSDA" : "", \
-               (value & ADMHC_PS_PPS) ? " PPS" : "", \
-               (value & ADMHC_PS_PRS) ? " PRS" : "", \
-               (value & ADMHC_PS_POCI) ? " POCI" : "", \
-               (value & ADMHC_PS_PSS) ? " PSS" : "", \
-               \
-               (value & ADMHC_PS_PES) ? " PES" : "", \
-               (value & ADMHC_PS_CCS) ? " CCS" : "" \
-               );
-
-#define dbg_port_write(hc, label, num, value) \
-       admhc_dbg(hc, \
-               "%s port%d " \
-               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               label, num, value, \
-               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (value & ADMHC_PS_PESC) ? " PESC" : "", \
-               (value & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (value & ADMHC_PS_CPP) ? " CPP" : "", \
-               (value & ADMHC_PS_SPP) ? " SPP" : "", \
-               (value & ADMHC_PS_SPR) ? " SPR" : "", \
-               (value & ADMHC_PS_CPS) ? " CPS" : "", \
-               (value & ADMHC_PS_SPS) ? " SPS" : "", \
-               \
-               (value & ADMHC_PS_SPE) ? " SPE" : "", \
-               (value & ADMHC_PS_CPE) ? " CPE" : "" \
-               );
-
-/*-------------------------------------------------------------------------*/
-
-/* build "status change" packet (one or two bytes) from HC registers */
-
-static int
-admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             i, changed = 0, length = 1;
-       int             any_connected = 0;
-       unsigned long   flags;
-       u32             status;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       if (!HCD_HW_ACCESSIBLE(hcd))
-               goto done;
-
-       /* init status */
-       status = admhc_read_rhdesc(ahcd);
-       if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
-               buf[0] = changed = 1;
-       else
-               buf[0] = 0;
-       if (ahcd->num_ports > 7) {
-               buf[1] = 0;
-               length++;
-       }
-
-       /* look at each port */
-       for (i = 0; i < ahcd->num_ports; i++) {
-               status = admhc_read_portstatus(ahcd, i);
-
-               /* can't autostop if ports are connected */
-               any_connected |= (status & ADMHC_PS_CCS);
-
-               if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC
-                               | ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
-                       changed = 1;
-                       if (i < 7)
-                               buf[0] |= 1 << (i + 1);
-                       else
-                               buf[1] |= 1 << (i - 7);
-               }
-       }
-
-       if (admhc_root_hub_state_changes(ahcd, changed,
-                       any_connected))
-               set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-       else
-               clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-
-done:
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return changed ? length : 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_get_hub_descriptor(struct admhcd *ahcd, char *buf)
-{
-       struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
-       u32 rh = admhc_read_rhdesc(ahcd);
-       u16 temp;
-
-       desc->bDescriptorType = USB_DT_HUB;     /* Hub-descriptor */
-       desc->bPwrOn2PwrGood = ADMHC_POTPGT/2;  /* use default value */
-       desc->bHubContrCurrent = 0x00;          /* 0mA */
-
-       desc->bNbrPorts = ahcd->num_ports;
-       temp = 1 + (ahcd->num_ports / 8);
-       desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
-
-       /* FIXME */
-       temp = 0;
-       if (rh & ADMHC_RH_NPS)          /* no power switching? */
-           temp |= 0x0002;
-       if (rh & ADMHC_RH_PSM)          /* per-port power switching? */
-           temp |= 0x0001;
-       if (rh & ADMHC_RH_NOCP)         /* no overcurrent reporting? */
-           temp |= 0x0010;
-       else if (rh & ADMHC_RH_OCPM)    /* per-port overcurrent reporting? */
-           temp |= 0x0008;
-       desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp);
-
-       /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-       desc->u.hs.DeviceRemovable[0] = 0;
-       desc->u.hs.DeviceRemovable[0] = ~0;
-
-       return 0;
-}
-
-static int admhc_get_hub_status(struct admhcd *ahcd, char *buf)
-{
-       struct usb_hub_status *hs = (struct usb_hub_status *)buf;
-       u32 t = admhc_read_rhdesc(ahcd);
-       u16 status, change;
-
-       status = 0;
-       status |= (t & ADMHC_RH_LPS) ? HUB_STATUS_LOCAL_POWER : 0;
-       status |= (t & ADMHC_RH_OCI) ? HUB_STATUS_OVERCURRENT : 0;
-
-       change = 0;
-       change |= (t & ADMHC_RH_LPSC) ? HUB_CHANGE_LOCAL_POWER : 0;
-       change |= (t & ADMHC_RH_OCIC) ? HUB_CHANGE_OVERCURRENT : 0;
-
-       hs->wHubStatus = (__force __u16)cpu_to_hc16(ahcd, status);
-       hs->wHubChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
-       return 0;
-}
-
-static int admhc_get_port_status(struct admhcd *ahcd, unsigned port, char *buf)
-{
-       struct usb_port_status *ps = (struct usb_port_status *)buf;
-       u32 t = admhc_read_portstatus(ahcd, port);
-       u16 status, change;
-
-       status = 0;
-       status |= (t & ADMHC_PS_CCS) ? USB_PORT_STAT_CONNECTION : 0;
-       status |= (t & ADMHC_PS_PES) ? USB_PORT_STAT_ENABLE : 0;
-       status |= (t & ADMHC_PS_PSS) ? USB_PORT_STAT_SUSPEND : 0;
-       status |= (t & ADMHC_PS_POCI) ? USB_PORT_STAT_OVERCURRENT : 0;
-       status |= (t & ADMHC_PS_PRS) ? USB_PORT_STAT_RESET : 0;
-       status |= (t & ADMHC_PS_PPS) ? USB_PORT_STAT_POWER : 0;
-       status |= (t & ADMHC_PS_LSDA) ? USB_PORT_STAT_LOW_SPEED : 0;
-
-       change = 0;
-       change |= (t & ADMHC_PS_CSC) ? USB_PORT_STAT_C_CONNECTION : 0;
-       change |= (t & ADMHC_PS_PESC) ? USB_PORT_STAT_C_ENABLE : 0;
-       change |= (t & ADMHC_PS_PSSC) ? USB_PORT_STAT_C_SUSPEND : 0;
-       change |= (t & ADMHC_PS_OCIC) ? USB_PORT_STAT_C_OVERCURRENT : 0;
-       change |= (t & ADMHC_PS_PRSC) ? USB_PORT_STAT_C_RESET : 0;
-
-       ps->wPortStatus = (__force __u16)cpu_to_hc16(ahcd, status);
-       ps->wPortChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_OTG
-
-static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       u32                     status;
-
-       if (!port)
-               return -EINVAL;
-       port--;
-
-       /* start port reset before HNP protocol times out */
-       status = admhc_read_portstatus(ahcd, port);
-       if (!(status & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       /* khubd will finish the reset later */
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_PRS);
-       return 0;
-}
-
-static void start_hnp(struct admhcd *ahcd);
-
-#else
-
-#define        admhc_start_port_reset          NULL
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-
-/* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
- * not necessarily continuous ... to guard against resume signaling.
- * The short timeout is safe for non-root hubs, and is backward-compatible
- * with earlier Linux hosts.
- */
-#ifdef CONFIG_USB_SUSPEND
-#define        PORT_RESET_MSEC         50
-#else
-#define        PORT_RESET_MSEC         10
-#endif
-
-/* this timer value might be vendor-specific ... */
-#define        PORT_RESET_HW_MSEC      10
-
-/* wrap-aware logic morphed from <linux/jiffies.h> */
-#define tick_before(t1, t2) ((s16)(((s16)(t1)) - ((s16)(t2))) < 0)
-
-/* called from some task, normally khubd */
-static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "reset port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPR);
-       mdelay(10);
-       admhc_write_portstatus(ahcd, port, (ADMHC_PS_SPE | ADMHC_PS_CSC));
-       mdelay(100);
-
-       return 0;
-}
-
-static inline int admhc_port_enable(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "enable port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPE);
-
-       return 0;
-}
-
-static inline int admhc_port_disable(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "disable port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_CPE);
-
-       return 0;
-}
-
-static inline int admhc_port_write(struct admhcd *ahcd, unsigned port,
-               u32 val)
-{
-#ifdef ADMHC_VERBOSE_DEBUG
-       dbg_port_write(ahcd, "write", port, val);
-#endif
-       admhc_write_portstatus(ahcd, port, val);
-
-       return 0;
-}
-
-static int admhc_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
-               u16 wIndex, char *buf, u16 wLength)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             ports = ahcd->num_ports;
-       int             ret = 0;
-
-       if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
-               return -ESHUTDOWN;
-
-       switch (typeReq) {
-       case ClearHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-#if 0                  /* FIXME */
-                       admhc_writel(ahcd, ADMHC_RH_OCIC,
-                                       &ahcd->regs->roothub.status);
-#endif
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case ClearPortFeature:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       ret = admhc_port_disable(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPS);
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPP);
-                       break;
-               case USB_PORT_FEAT_C_CONNECTION:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CSC);
-                       break;
-               case USB_PORT_FEAT_C_ENABLE:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PESC);
-                       break;
-               case USB_PORT_FEAT_C_SUSPEND:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PSSC);
-                       break;
-               case USB_PORT_FEAT_C_OVER_CURRENT:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_OCIC);
-                       break;
-               case USB_PORT_FEAT_C_RESET:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PRSC);
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case GetHubDescriptor:
-               ret = admhc_get_hub_descriptor(ahcd, buf);
-               break;
-       case GetHubStatus:
-               ret = admhc_get_hub_status(ahcd, buf);
-               break;
-       case GetPortStatus:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               ret = admhc_get_port_status(ahcd, wIndex, buf);
-               break;
-       case SetHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-                       /* FIXME:  this can be cleared, yes? */
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case SetPortFeature:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       ret = admhc_port_enable(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_RESET:
-                       ret = admhc_port_reset(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-#ifdef CONFIG_USB_OTG
-                       if (hcd->self.otg_port == (wIndex + 1)
-                                       && hcd->self.b_hnp_enable)
-                               start_hnp(ahcd);
-                       else
-#endif
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPS);
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPP);
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-
-       default:
-error:
-               /* "protocol stall" on error */
-               ret = -EPIPE;
-       }
-
-       return ret;
-}
-
diff --git a/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-mem.c b/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-mem.c
deleted file mode 100644 (file)
index 79fff70..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-mem.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OHCI deals with three types of memory:
- *     - data used only by the HCD ... kmalloc is fine
- *     - async and periodic schedules, shared by HC and HCD ... these
- *       need to use dma_pool or dma_alloc_coherent
- *     - driver buffers, read/written by HC ... the hcd glue or the
- *       device driver provides us with dma addresses
- *
- * There's also "register" data, which is memory mapped.
- * No memory seen by this driver (or any HCD) may be paged out.
- */
-
-/*-------------------------------------------------------------------------*/
-
-static void admhc_hcd_init(struct admhcd *ahcd)
-{
-       ahcd->next_statechange = jiffies;
-       spin_lock_init(&ahcd->lock);
-       INIT_LIST_HEAD(&ahcd->pending);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_mem_init(struct admhcd *ahcd)
-{
-       ahcd->td_cache = dma_pool_create("admhc_td",
-               admhcd_to_hcd(ahcd)->self.controller,
-               sizeof(struct td),
-               TD_ALIGN, /* byte alignment */
-               0 /* no page-crossing issues */
-               );
-       if (!ahcd->td_cache)
-               goto err;
-
-       ahcd->ed_cache = dma_pool_create("admhc_ed",
-               admhcd_to_hcd(ahcd)->self.controller,
-               sizeof(struct ed),
-               ED_ALIGN, /* byte alignment */
-               0 /* no page-crossing issues */
-               );
-       if (!ahcd->ed_cache)
-               goto err_td_cache;
-
-       return 0;
-
-err_td_cache:
-       dma_pool_destroy(ahcd->td_cache);
-       ahcd->td_cache = NULL;
-err:
-       return -ENOMEM;
-}
-
-static void admhc_mem_cleanup(struct admhcd *ahcd)
-{
-       if (ahcd->td_cache) {
-               dma_pool_destroy(ahcd->td_cache);
-               ahcd->td_cache = NULL;
-       }
-
-       if (ahcd->ed_cache) {
-               dma_pool_destroy(ahcd->ed_cache);
-               ahcd->ed_cache = NULL;
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* ahcd "done list" processing needs this mapping */
-static inline struct td *dma_to_td(struct admhcd *ahcd, dma_addr_t td_dma)
-{
-       struct td *td;
-
-       td_dma &= TD_MASK;
-       td = ahcd->td_hash[TD_HASH_FUNC(td_dma)];
-       while (td && td->td_dma != td_dma)
-               td = td->td_hash;
-
-       return td;
-}
-
-/* TDs ... */
-static struct td *td_alloc(struct admhcd *ahcd, gfp_t mem_flags)
-{
-       dma_addr_t      dma;
-       struct td       *td;
-
-       td = dma_pool_alloc(ahcd->td_cache, mem_flags, &dma);
-       if (!td)
-               return NULL;
-
-       /* in case ahcd fetches it, make it look dead */
-       memset(td, 0, sizeof *td);
-       td->hwNextTD = cpu_to_hc32(ahcd, dma);
-       td->td_dma = dma;
-       /* hashed in td_fill */
-
-       return td;
-}
-
-static void td_free(struct admhcd *ahcd, struct td *td)
-{
-       struct td **prev = &ahcd->td_hash[TD_HASH_FUNC(td->td_dma)];
-
-       while (*prev && *prev != td)
-               prev = &(*prev)->td_hash;
-       if (*prev)
-               *prev = td->td_hash;
-#if 0
-       /* TODO: remove */
-       else if ((td->hwINFO & cpu_to_hc32(ahcd, TD_DONE)) != 0)
-               admhc_dbg(ahcd, "no hash for td %p\n", td);
-#else
-       else if ((td->flags & TD_FLAG_DONE) != 0)
-               admhc_dbg(ahcd, "no hash for td %p\n", td);
-#endif
-       dma_pool_free(ahcd->td_cache, td, td->td_dma);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* EDs ... */
-static struct ed *ed_alloc(struct admhcd *ahcd, gfp_t mem_flags)
-{
-       dma_addr_t      dma;
-       struct ed       *ed;
-
-       ed = dma_pool_alloc(ahcd->ed_cache, mem_flags, &dma);
-       if (!ed)
-               return NULL;
-
-       memset(ed, 0, sizeof(*ed));
-       ed->dma = dma;
-
-       INIT_LIST_HEAD(&ed->td_list);
-       INIT_LIST_HEAD(&ed->urb_list);
-
-       return ed;
-}
-
-static void ed_free(struct admhcd *ahcd, struct ed *ed)
-{
-       dma_pool_free(ahcd->ed_cache, ed, ed->dma);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* URB priv ... */
-static void urb_priv_free(struct admhcd *ahcd, struct urb_priv *urb_priv)
-{
-       int i;
-
-       for (i = 0; i < urb_priv->td_cnt; i++)
-               if (urb_priv->td[i])
-                       td_free(ahcd, urb_priv->td[i]);
-
-       list_del(&urb_priv->pending);
-       kfree(urb_priv);
-}
-
-static struct urb_priv *urb_priv_alloc(struct admhcd *ahcd, int num_tds,
-               gfp_t mem_flags)
-{
-       struct urb_priv *priv;
-
-       /* allocate the private part of the URB */
-       priv = kzalloc(sizeof(*priv) + sizeof(struct td) * num_tds, mem_flags);
-       if (!priv)
-               goto err;
-
-       /* allocate the TDs (deferring hash chain updates) */
-       for (priv->td_cnt = 0; priv->td_cnt < num_tds; priv->td_cnt++) {
-               priv->td[priv->td_cnt] = td_alloc(ahcd, mem_flags);
-               if (priv->td[priv->td_cnt] == NULL)
-                       goto err_free;
-       }
-
-       INIT_LIST_HEAD(&priv->pending);
-
-       return priv;
-
-err_free:
-       urb_priv_free(ahcd, priv);
-err:
-       return NULL;
-}
diff --git a/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-pm.c b/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-pm.c
deleted file mode 100644 (file)
index 7d7fc24..0000000
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from fragments of the OHCI driver.
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#define OHCI_SCHED_ENABLES \
-       (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
-
-#ifdef CONFIG_PM
-static int admhc_restart(struct admhcd *ahcd);
-
-static int admhc_rh_suspend(struct admhcd *ahcd, int autostop)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       int                     status = 0;
-
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-       switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-       case OHCI_USB_RESUME:
-               admhc_dbg(ahcd, "resume/suspend?\n");
-               ahcd->hc_control &= ~OHCI_CTRL_HCFS;
-               ahcd->hc_control |= OHCI_USB_RESET;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-               /* FALL THROUGH */
-       case OHCI_USB_RESET:
-               status = -EBUSY;
-               admhc_dbg(ahcd, "needs reinit!\n");
-               goto done;
-       case OHCI_USB_SUSPEND:
-               if (!ahcd->autostop) {
-                       admhc_dbg(ahcd, "already suspended\n");
-                       goto done;
-               }
-       }
-       admhc_dbg(ahcd, "%s root hub\n",
-                       autostop ? "auto-stop" : "suspend");
-
-       /* First stop any processing */
-       if (!autostop && (ahcd->hc_control & OHCI_SCHED_ENABLES)) {
-               ahcd->hc_control &= ~OHCI_SCHED_ENABLES;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-               admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->intrstatus);
-
-               /* sched disables take effect on the next frame,
-                * then the last WDH could take 6+ msec
-                */
-               admhc_dbg(ahcd, "stopping schedules ...\n");
-               ahcd->autostop = 0;
-               spin_unlock_irq (&ahcd->lock);
-               msleep (8);
-               spin_lock_irq(&ahcd->lock);
-       }
-       dl_done_list (ahcd);
-       finish_unlinks (ahcd, admhc_frame_no(ahcd));
-
-       /* maybe resume can wake root hub */
-       if (device_may_wakeup(&admhcd_to_hcd(ahcd)->self.root_hub->dev) ||
-                       autostop)
-               ahcd->hc_control |= OHCI_CTRL_RWE;
-       else {
-               admhc_writel(ahcd, OHCI_INTR_RHSC, &ahcd->regs->intrdisable);
-               ahcd->hc_control &= ~OHCI_CTRL_RWE;
-       }
-
-       /* Suspend hub ... this is the "global (to this bus) suspend" mode,
-        * which doesn't imply ports will first be individually suspended.
-        */
-       ahcd->hc_control &= ~OHCI_CTRL_HCFS;
-       ahcd->hc_control |= OHCI_USB_SUSPEND;
-       admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-
-       /* no resumes until devices finish suspending */
-       if (!autostop) {
-               ahcd->next_statechange = jiffies + msecs_to_jiffies (5);
-               ahcd->autostop = 0;
-       }
-
-done:
-       return status;
-}
-
-static inline struct ed *find_head(struct ed *ed)
-{
-       /* for bulk and control lists */
-       while (ed->ed_prev)
-               ed = ed->ed_prev;
-       return ed;
-}
-
-/* caller has locked the root hub */
-static int admhc_rh_resume(struct admhcd *ahcd)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       struct usb_hcd          *hcd = admhcd_to_hcd (ahcd);
-       u32                     temp, enables;
-       int                     status = -EINPROGRESS;
-       int                     autostopped = ahcd->autostop;
-
-       ahcd->autostop = 0;
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-
-       if (ahcd->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
-               /* this can happen after resuming a swsusp snapshot */
-               if (hcd->state == HC_STATE_RESUMING) {
-                       admhc_dbg(ahcd, "BIOS/SMM active, control %03x\n",
-                                       ahcd->hc_control);
-                       status = -EBUSY;
-               /* this happens when pmcore resumes HC then root */
-               } else {
-                       admhc_dbg(ahcd, "duplicate resume\n");
-                       status = 0;
-               }
-       } else switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-       case OHCI_USB_SUSPEND:
-               ahcd->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
-               ahcd->hc_control |= OHCI_USB_RESUME;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-               admhc_dbg(ahcd, "%s root hub\n",
-                               autostopped ? "auto-start" : "resume");
-               break;
-       case OHCI_USB_RESUME:
-               /* HCFS changes sometime after INTR_RD */
-               admhc_dbg(ahcd, "%swakeup root hub\n",
-                               autostopped ? "auto-" : "");
-               break;
-       case OHCI_USB_OPER:
-               /* this can happen after resuming a swsusp snapshot */
-               admhc_dbg(ahcd, "snapshot resume? reinit\n");
-               status = -EBUSY;
-               break;
-       default:                /* RESET, we lost power */
-               admhc_dbg(ahcd, "lost power\n");
-               status = -EBUSY;
-       }
-       if (status == -EBUSY) {
-               if (!autostopped) {
-                       spin_unlock_irq (&ahcd->lock);
-                       (void) ahcd_init (ahcd);
-                       status = admhc_restart (ahcd);
-                       spin_lock_irq(&ahcd->lock);
-               }
-               return status;
-       }
-       if (status != -EINPROGRESS)
-               return status;
-       if (autostopped)
-               goto skip_resume;
-       spin_unlock_irq (&ahcd->lock);
-
-       /* Some controllers (lucent erratum) need extra-long delays */
-       msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
-
-       temp = admhc_readl(ahcd, &ahcd->regs->control);
-       temp &= OHCI_CTRL_HCFS;
-       if (temp != OHCI_USB_RESUME) {
-               admhc_err (ahcd, "controller won't resume\n");
-               spin_lock_irq(&ahcd->lock);
-               return -EBUSY;
-       }
-
-       /* disable old schedule state, reinit from scratch */
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_controlhead);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_controlcurrent);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkhead);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkcurrent);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_periodcurrent);
-       admhc_writel(ahcd, (u32) ahcd->hcca_dma, &ahcd->ahcd->regs->hcca);
-
-       /* Sometimes PCI D3 suspend trashes frame timings ... */
-       periodic_reinit(ahcd);
-
-       /* the following code is executed with ahcd->lock held and
-        * irqs disabled if and only if autostopped is true
-        */
-
-skip_resume:
-       /* interrupts might have been disabled */
-       admhc_writel(ahcd, OHCI_INTR_INIT, &ahcd->regs->int_enable);
-       if (ahcd->ed_rm_list)
-               admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->int_enable);
-
-       /* Then re-enable operations */
-       admhc_writel(ahcd, OHCI_USB_OPER, &ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-       if (!autostopped)
-               msleep (3);
-
-       temp = ahcd->hc_control;
-       temp &= OHCI_CTRL_RWC;
-       temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
-       ahcd->hc_control = temp;
-       admhc_writel(ahcd, temp, &ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-
-       /* TRSMRCY */
-       if (!autostopped) {
-               msleep (10);
-               spin_lock_irq(&ahcd->lock);
-       }
-       /* now ahcd->lock is always held and irqs are always disabled */
-
-       /* keep it alive for more than ~5x suspend + resume costs */
-       ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-
-       /* maybe turn schedules back on */
-       enables = 0;
-       temp = 0;
-       if (!ahcd->ed_rm_list) {
-               if (ahcd->ed_controltail) {
-                       admhc_writel(ahcd,
-                                       find_head (ahcd->ed_controltail)->dma,
-                                       &ahcd->regs->ed_controlhead);
-                       enables |= OHCI_CTRL_CLE;
-                       temp |= OHCI_CLF;
-               }
-               if (ahcd->ed_bulktail) {
-                       admhc_writel(ahcd, find_head (ahcd->ed_bulktail)->dma,
-                               &ahcd->regs->ed_bulkhead);
-                       enables |= OHCI_CTRL_BLE;
-                       temp |= OHCI_BLF;
-               }
-       }
-       if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
-               enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
-       if (enables) {
-               admhc_dbg(ahcd, "restarting schedules ... %08x\n", enables);
-               ahcd->hc_control |= enables;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               if (temp)
-                       admhc_writel(ahcd, temp, &ahcd->regs->cmdstatus);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-       }
-
-       return 0;
-}
-
-static int admhc_bus_suspend(struct usb_hcd *hcd)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             rc;
-
-       spin_lock_irq(&ahcd->lock);
-
-       if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
-               rc = -ESHUTDOWN;
-       else
-               rc = admhc_rh_suspend(ahcd, 0);
-       spin_unlock_irq(&ahcd->lock);
-       return rc;
-}
-
-static int admhc_bus_resume(struct usb_hcd *hcd)
-{
-       struct admhcd           *ahcd = hcd_to_admhcd(hcd);
-       int                     rc;
-
-       if (time_before(jiffies, ahcd->next_statechange))
-               msleep(5);
-
-       spin_lock_irq(&ahcd->lock);
-
-       if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
-               rc = -ESHUTDOWN;
-       else
-               rc = admhc_rh_resume(ahcd);
-       spin_unlock_irq(&ahcd->lock);
-
-       /* poll until we know a device is connected or we autostop */
-       if (rc == 0)
-               usb_hcd_poll_rh_status(hcd);
-       return rc;
-}
-
-/* Carry out polling-, autostop-, and autoresume-related state changes */
-static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
-               int any_connected)
-{
-       int     poll_rh = 1;
-
-       switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-
-       case OHCI_USB_OPER:
-               /* keep on polling until we know a device is connected
-                * and RHSC is enabled */
-               if (!ahcd->autostop) {
-                       if (any_connected ||
-                                       !device_may_wakeup(&admhcd_to_hcd(ahcd)
-                                               ->self.root_hub->dev)) {
-                               if (admhc_readl(ahcd, &ahcd->regs->int_enable) &
-                                               OHCI_INTR_RHSC)
-                                       poll_rh = 0;
-                       } else {
-                               ahcd->autostop = 1;
-                               ahcd->next_statechange = jiffies + HZ;
-                       }
-
-               /* if no devices have been attached for one second, autostop */
-               } else {
-                       if (changed || any_connected) {
-                               ahcd->autostop = 0;
-                               ahcd->next_statechange = jiffies +
-                                               STATECHANGE_DELAY;
-                       } else if (time_after_eq(jiffies,
-                                               ahcd->next_statechange)
-                                       && !ahcd->ed_rm_list
-                                       && !(ahcd->hc_control &
-                                               OHCI_SCHED_ENABLES)) {
-                               ahcd_rh_suspend(ahcd, 1);
-                       }
-               }
-               break;
-
-       /* if there is a port change, autostart or ask to be resumed */
-       case OHCI_USB_SUSPEND:
-       case OHCI_USB_RESUME:
-               if (changed) {
-                       if (ahcd->autostop)
-                               admhc_rh_resume(ahcd);
-                       else
-                               usb_hcd_resume_root_hub(admhcd_to_hcd(ahcd));
-               } else {
-                       /* everything is idle, no need for polling */
-                       poll_rh = 0;
-               }
-               break;
-       }
-       return poll_rh;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* must not be called from interrupt context */
-static int admhc_restart(struct admhcd *ahcd)
-{
-       int temp;
-       int i;
-       struct urb_priv *priv;
-
-       /* mark any devices gone, so they do nothing till khubd disconnects.
-        * recycle any "live" eds/tds (and urbs) right away.
-        * later, khubd disconnect processing will recycle the other state,
-        * (either as disconnect/reconnect, or maybe someday as a reset).
-        */
-       spin_lock_irq(&ahcd->lock);
-       admhc_disable(ahcd);
-       usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub);
-       if (!list_empty(&ahcd->pending))
-               admhc_dbg(ahcd, "abort schedule...\n");
-               list_for_each_entry(priv, &ahcd->pending, pending) {
-               struct urb      *urb = priv->td[0]->urb;
-               struct ed       *ed = priv->ed;
-
-               switch (ed->state) {
-               case ED_OPER:
-                       ed->state = ED_UNLINK;
-                       ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
-                       ed_deschedule (ahcd, ed);
-
-                       ed->ed_next = ahcd->ed_rm_list;
-                       ed->ed_prev = NULL;
-                       ahcd->ed_rm_list = ed;
-                       /* FALLTHROUGH */
-               case ED_UNLINK:
-                       break;
-               default:
-                       admhc_dbg(ahcd, "bogus ed %p state %d\n",
-                                       ed, ed->state);
-               }
-
-               if (!urb->unlinked)
-                       urb->unlinked = -ESHUTDOWN;
-       }
-       finish_unlinks(ahcd, 0);
-       spin_unlock_irq(&ahcd->lock);
-
-       /* paranoia, in case that didn't work: */
-
-       /* empty the interrupt branches */
-       for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0;
-       for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0;
-
-       /* no EDs to remove */
-       ahcd->ed_rm_list = NULL;
-
-       /* empty control and bulk lists */
-       ahcd->ed_controltail = NULL;
-       ahcd->ed_bulktail    = NULL;
-
-       if ((temp = admhc_run(ahcd)) < 0) {
-               admhc_err(ahcd, "can't restart, %d\n", temp);
-               return temp;
-       } else {
-               /* here we "know" root ports should always stay powered,
-                * and that if we try to turn them back on the root hub
-                * will respond to CSC processing.
-                */
-               i = ahcd->num_ports;
-               while (i--)
-                       admhc_writel(ahcd, RH_PS_PSS,
-                               &ahcd->regs->portstatus[i]);
-               admhc_dbg(ahcd, "restart complete\n");
-       }
-       return 0;
-}
-
-#else  /* CONFIG_PM */
-
-static inline int admhc_rh_resume(struct admhcd *ahcd)
-{
-       return 0;
-}
-
-/* Carry out polling-related state changes.
- * autostop isn't used when CONFIG_PM is turned off.
- */
-static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
-               int any_connected)
-{
-       /* If INSM is enabled, don't poll */
-       if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM)
-               return 0;
-
-       /* If no status changes are pending, enable status-change interrupts */
-       if (!changed) {
-               admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
-               return 0;
-       }
-
-       return 1;
-}
-
-#endif /* CONFIG_PM */
-
diff --git a/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-q.c b/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120-q.c
deleted file mode 100644 (file)
index cd9c892..0000000
+++ /dev/null
@@ -1,964 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-q.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/irq.h>
-#include <linux/slab.h>
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * URB goes back to driver, and isn't reissued.
- * It's completely gone from HC data structures.
- * PRECONDITION:  ahcd lock held, irqs blocked.
- */
-static void
-finish_urb(struct admhcd *ahcd, struct urb *urb, int status)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       urb_priv_free(ahcd, urb->hcpriv);
-
-       if (likely(status == -EINPROGRESS))
-               status = 0;
-
-       switch (usb_pipetype(urb->pipe)) {
-       case PIPE_ISOCHRONOUS:
-               admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--;
-               break;
-       case PIPE_INTERRUPT:
-               admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--;
-               break;
-       }
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       urb_print(ahcd, urb, "RET", usb_pipeout(urb->pipe), status);
-#endif
-
-       /* urb->complete() can reenter this HCD */
-       usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
-       spin_unlock(&ahcd->lock);
-       usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status);
-       spin_lock(&ahcd->lock);
-}
-
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* search for the right schedule branch to use for a periodic ed.
- * does some load balancing; returns the branch, or negative errno.
- */
-static int balance(struct admhcd *ahcd, int interval, int load)
-{
-       int     i, branch = -ENOSPC;
-
-       /* iso periods can be huge; iso tds specify frame numbers */
-       if (interval > NUM_INTS)
-               interval = NUM_INTS;
-
-       /* search for the least loaded schedule branch of that period
-        * that has enough bandwidth left unreserved.
-        */
-       for (i = 0; i < interval ; i++) {
-               if (branch < 0 || ahcd->load[branch] > ahcd->load[i]) {
-                       int     j;
-
-                       /* usb 1.1 says 90% of one frame */
-                       for (j = i; j < NUM_INTS; j += interval) {
-                               if ((ahcd->load[j] + load) > 900)
-                                       break;
-                       }
-                       if (j < NUM_INTS)
-                               continue;
-                       branch = i;
-               }
-       }
-       return branch;
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* both iso and interrupt requests have periods; this routine puts them
- * into the schedule tree in the apppropriate place.  most iso devices use
- * 1msec periods, but that's not required.
- */
-static void periodic_link(struct admhcd *ahcd, struct ed *ed)
-{
-       unsigned        i;
-
-       admhc_vdbg(ahcd, "link %sed %p branch %d [%dus.], interval %d\n",
-               (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
-               ed, ed->branch, ed->load, ed->interval);
-
-       for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
-               struct ed       **prev = &ahcd->periodic[i];
-               __hc32          *prev_p = &ahcd->hcca->int_table[i];
-               struct ed       *here = *prev;
-
-               /* sorting each branch by period (slow before fast)
-                * lets us share the faster parts of the tree.
-                * (plus maybe: put interrupt eds before iso)
-                */
-               while (here && ed != here) {
-                       if (ed->interval > here->interval)
-                               break;
-                       prev = &here->ed_next;
-                       prev_p = &here->hwNextED;
-                       here = *prev;
-               }
-               if (ed != here) {
-                       ed->ed_next = here;
-                       if (here)
-                               ed->hwNextED = *prev_p;
-                       wmb();
-                       *prev = ed;
-                       *prev_p = cpu_to_hc32(ahcd, ed->dma);
-                       wmb();
-               }
-               ahcd->load[i] += ed->load;
-       }
-       admhcd_to_hcd(ahcd)->self.bandwidth_allocated += ed->load / ed->interval;
-}
-#endif
-
-/* link an ed into the HC chain */
-
-static int ed_schedule(struct admhcd *ahcd, struct ed *ed)
-{
-       struct ed *old_tail;
-
-       if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING)
-               return -EAGAIN;
-
-       ed->state = ED_OPER;
-
-       old_tail = ahcd->ed_tails[ed->type];
-
-       ed->ed_next = old_tail->ed_next;
-       if (ed->ed_next) {
-               ed->ed_next->ed_prev = ed;
-               ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma);
-       }
-       ed->ed_prev = old_tail;
-
-       old_tail->ed_next = ed;
-       old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ahcd->ed_tails[ed->type] = ed;
-
-       admhc_dma_enable(ahcd);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* scan the periodic table to find and unlink this ED */
-static void periodic_unlink(struct admhcd *ahcd, struct ed *ed)
-{
-       int     i;
-
-       for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
-               struct ed       *temp;
-               struct ed       **prev = &ahcd->periodic[i];
-               __hc32          *prev_p = &ahcd->hcca->int_table[i];
-
-               while (*prev && (temp = *prev) != ed) {
-                       prev_p = &temp->hwNextED;
-                       prev = &temp->ed_next;
-               }
-               if (*prev) {
-                       *prev_p = ed->hwNextED;
-                       *prev = ed->ed_next;
-               }
-               ahcd->load[i] -= ed->load;
-       }
-
-       admhcd_to_hcd(ahcd)->self.bandwidth_allocated -= ed->load / ed->interval;
-       admhc_vdbg(ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n",
-               (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
-               ed, ed->branch, ed->load, ed->interval);
-}
-#endif
-
-/* unlink an ed from the HC chain.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed
- * (assuming it already started that, which needn't be true).
- *
- * ED_UNLINK is a transient state: the HC may still see this ED, but soon
- * it won't.  ED_SKIP means the HC will finish its current transaction,
- * but won't start anything new.  The TD queue may still grow; device
- * drivers don't know about this HCD-internal state.
- *
- * When the HC can't see the ED, something changes ED_UNLINK to one of:
- *
- *  - ED_OPER: when there's any request queued, the ED gets rescheduled
- *    immediately.  HC should be working on them.
- *
- *  - ED_IDLE:  when there's no TD queue. there's no reason for the HC
- *    to care about this ED; safe to disable the endpoint.
- *
- * When finish_unlinks() runs later, after SOF interrupt, it will often
- * complete one or more URB unlinks before making that state change.
- */
-static void ed_deschedule(struct admhcd *ahcd, struct ed *ed)
-{
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ED-DESCHED", ed, 1);
-#endif
-
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->state = ED_UNLINK;
-
-       /* remove this ED from the HC list */
-       ed->ed_prev->hwNextED = ed->hwNextED;
-
-       /* and remove it from our list also */
-       ed->ed_prev->ed_next = ed->ed_next;
-
-       if (ed->ed_next)
-               ed->ed_next->ed_prev = ed->ed_prev;
-
-       if (ahcd->ed_tails[ed->type] == ed)
-               ahcd->ed_tails[ed->type] = ed->ed_prev;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info)
-{
-       struct ed *ed;
-       struct td *td;
-
-       ed = ed_alloc(ahcd, GFP_ATOMIC);
-       if (!ed)
-               goto err;
-
-       /* dummy td; end of td list for this ed */
-       td = td_alloc(ahcd, GFP_ATOMIC);
-       if (!td)
-               goto err_free_ed;
-
-       switch (type) {
-       case PIPE_INTERRUPT:
-               info |= ED_INT;
-               break;
-       case PIPE_ISOCHRONOUS:
-               info |= ED_ISO;
-               break;
-       }
-
-       ed->dummy = td;
-       ed->state = ED_IDLE;
-       ed->type = type;
-
-       ed->hwINFO = cpu_to_hc32(ahcd, info);
-       ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma);
-       ed->hwHeadP = ed->hwTailP;      /* ED_C, ED_H zeroed */
-
-       return ed;
-
-err_free_ed:
-       ed_free(ahcd, ed);
-err:
-       return NULL;
-}
-
-/* get and maybe (re)init an endpoint. init _should_ be done only as part
- * of enumeration, usb_set_configuration() or usb_set_interface().
- */
-static struct ed *ed_get(struct admhcd *ahcd,  struct usb_host_endpoint *ep,
-       struct usb_device *udev, unsigned int pipe, int interval)
-{
-       struct ed               *ed;
-       unsigned long           flags;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       ed = ep->hcpriv;
-       if (!ed) {
-               u32             info;
-
-               /* FIXME: usbcore changes dev->devnum before SET_ADDRESS
-                * succeeds ... otherwise we wouldn't need "pipe".
-                */
-               info = usb_pipedevice(pipe);
-               info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT;
-               info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT;
-               if (udev->speed == USB_SPEED_FULL)
-                       info |= ED_SPEED_FULL;
-
-               ed = ed_create(ahcd, usb_pipetype(pipe), info);
-               if (ed)
-                       ep->hcpriv = ed;
-       }
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return ed;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* request unlinking of an endpoint from an operational HC.
- * put the ep on the rm_list
- * real work is done at the next start frame (SOFI) hardware interrupt
- * caller guarantees HCD is running, so hardware access is safe,
- * and that ed->state is ED_OPER
- */
-static void start_ed_unlink(struct admhcd *ahcd, struct ed *ed)
-{
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ED-UNLINK", ed, 1);
-#endif
-
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
-       ed_deschedule(ahcd, ed);
-
-       /* add this ED into the remove list */
-       ed->ed_rm_next = ahcd->ed_rm_list;
-       ahcd->ed_rm_list = ed;
-
-       /* enable SOF interrupt */
-       admhc_intr_ack(ahcd, ADMHC_INTR_SOFI);
-       admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* SOF interrupt might get delayed; record the frame counter value that
-        * indicates when the HC isn't looking at it, so concurrent unlinks
-        * behave.  frame_no wraps every 2^16 msec, and changes right before
-        * SOF is triggered.
-        */
-       ed->tick = admhc_frame_no(ahcd) + 1;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void
-td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len,
-       struct urb *urb, int index)
-{
-       struct td               *td, *td_pt;
-       struct urb_priv         *urb_priv = urb->hcpriv;
-       int                     hash;
-       u32                     cbl = 0;
-
-#if 1
-       if (index == (urb_priv->td_cnt - 1) &&
-                       ((urb->transfer_flags & URB_NO_INTERRUPT) == 0))
-               cbl |= TD_IE;
-#else
-       if (index == (urb_priv->td_cnt - 1))
-               cbl |= TD_IE;
-#endif
-
-       /* use this td as the next dummy */
-       td_pt = urb_priv->td[index];
-
-       /* fill the old dummy TD */
-       td = urb_priv->td[index] = urb_priv->ed->dummy;
-       urb_priv->ed->dummy = td_pt;
-
-       td->ed = urb_priv->ed;
-       td->next_dl_td = NULL;
-       td->index = index;
-       td->urb = urb;
-       td->data_dma = data;
-       if (!len)
-               data = 0;
-
-       if (data)
-               cbl |= (len & TD_BL_MASK);
-
-       info |= TD_OWN;
-
-       /* setup hardware specific fields */
-       td->hwINFO = cpu_to_hc32(ahcd, info);
-       td->hwDBP = cpu_to_hc32(ahcd, data);
-       td->hwCBL = cpu_to_hc32(ahcd, cbl);
-       td->hwNextTD = cpu_to_hc32(ahcd, td_pt->td_dma);
-
-       /* append to queue */
-       list_add_tail(&td->td_list, &td->ed->td_list);
-
-       /* hash it for later reverse mapping */
-       hash = TD_HASH_FUNC(td->td_dma);
-       td->td_hash = ahcd->td_hash[hash];
-       ahcd->td_hash[hash] = td;
-
-       /* HC might read the TD (or cachelines) right away ... */
-       wmb();
-       td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Prepare all TDs of a transfer, and queue them onto the ED.
- * Caller guarantees HC is active.
- * Usually the ED is already on the schedule, so TDs might be
- * processed as soon as they're queued.
- */
-static void td_submit_urb(struct admhcd *ahcd, struct urb *urb)
-{
-       struct urb_priv *urb_priv = urb->hcpriv;
-       dma_addr_t      data;
-       int             data_len = urb->transfer_buffer_length;
-       int             cnt = 0;
-       u32             info = 0;
-       int             is_out = usb_pipeout(urb->pipe);
-       u32             toggle = 0;
-
-       /* OHCI handles the bulk/interrupt data toggles itself.  We just
-        * use the device toggle bits for resetting, and rely on the fact
-        * that resetting toggle is meaningless if the endpoint is active.
-        */
-
-       if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) {
-               toggle = TD_T_CARRY;
-       } else {
-               toggle = TD_T_DATA0;
-               usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe),
-                       is_out, 1);
-       }
-
-       urb_priv->td_idx = 0;
-       list_add(&urb_priv->pending, &ahcd->pending);
-
-       if (data_len)
-               data = urb->transfer_dma;
-       else
-               data = 0;
-
-       /* NOTE:  TD_CC is set so we can tell which TDs the HC processed by
-        * using TD_CC_GET, as well as by seeing them on the done list.
-        * (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
-        */
-       switch (urb_priv->ed->type) {
-       case PIPE_INTERRUPT:
-               info = is_out
-                       ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               /* setup service interval and starting frame number */
-               info |= (urb->start_frame & TD_FN_MASK);
-               info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT;
-
-               td_fill(ahcd, info, data, data_len, urb, cnt);
-               cnt++;
-
-               admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++;
-               break;
-
-       case PIPE_BULK:
-               info = is_out
-                       ? TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               /* TDs _could_ transfer up to 8K each */
-               while (data_len > TD_DATALEN_MAX) {
-                       td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
-                               data, TD_DATALEN_MAX, urb, cnt);
-                       data += TD_DATALEN_MAX;
-                       data_len -= TD_DATALEN_MAX;
-                       cnt++;
-               }
-
-               td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data,
-                       data_len, urb, cnt);
-               cnt++;
-
-               if ((urb->transfer_flags & URB_ZERO_PACKET)
-                               && (cnt < urb_priv->td_cnt)) {
-                       td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
-                               0, 0, urb, cnt);
-                       cnt++;
-               }
-               break;
-
-       /* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
-        * any DATA phase works normally, and the STATUS ack is special.
-        */
-       case PIPE_CONTROL:
-               /* fill a TD for the setup */
-               info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0;
-               td_fill(ahcd, info, urb->setup_dma, 8, urb, cnt++);
-
-               if (data_len > 0) {
-                       /* fill a TD for the data */
-                       info = TD_SCC_NOTACCESSED | TD_T_DATA1;
-                       info |= is_out ? TD_DP_OUT : TD_DP_IN;
-                       /* NOTE:  mishandles transfers >8K, some >4K */
-                       td_fill(ahcd, info, data, data_len, urb, cnt++);
-               }
-
-               /* fill a TD for the ACK */
-               info = (is_out || data_len == 0)
-                       ? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1
-                       : TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1;
-               td_fill(ahcd, info, data, 0, urb, cnt++);
-
-               break;
-
-       /* ISO has no retransmit, so no toggle;
-        * Each TD could handle multiple consecutive frames (interval 1);
-        * we could often reduce the number of TDs here.
-        */
-       case PIPE_ISOCHRONOUS:
-               info = is_out
-                       ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
-                       int frame = urb->start_frame;
-
-                       frame += cnt * urb->interval;
-                       frame &= TD_FN_MASK;
-                       td_fill(ahcd, info | frame,
-                               data + urb->iso_frame_desc[cnt].offset,
-                               urb->iso_frame_desc[cnt].length, urb, cnt);
-               }
-               admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++;
-               break;
-       }
-
-       if (urb_priv->td_cnt != cnt)
-               admhc_err(ahcd, "bad number of tds created for urb %p\n", urb);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-/* calculate transfer length/status and update the urb */
-static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
-{
-       struct urb_priv *urb_priv = urb->hcpriv;
-       u32     info;
-       u32     bl;
-       u32     tdDBP;
-       int     type = usb_pipetype(urb->pipe);
-       int     cc;
-       int     status = -EINPROGRESS;
-
-       info = hc32_to_cpup(ahcd, &td->hwINFO);
-       tdDBP = hc32_to_cpup(ahcd, &td->hwDBP);
-       bl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL));
-       cc = TD_CC_GET(info);
-
-       /* ISO ... drivers see per-TD length/status */
-       if (type == PIPE_ISOCHRONOUS) {
-               /* TODO */
-               int     dlen = 0;
-
-               /* NOTE:  assumes FC in tdINFO == 0, and that
-                * only the first of 0..MAXPSW psws is used.
-                */
-               if (info & TD_CC)       /* hc didn't touch? */
-                       return status;
-
-               if (usb_pipeout(urb->pipe))
-                       dlen = urb->iso_frame_desc[td->index].length;
-               else {
-                       /* short reads are always OK for ISO */
-                       if (cc == TD_CC_DATAUNDERRUN)
-                               cc = TD_CC_NOERROR;
-                       dlen = tdDBP - td->data_dma + bl;
-               }
-
-               urb->actual_length += dlen;
-               urb->iso_frame_desc[td->index].actual_length = dlen;
-               urb->iso_frame_desc[td->index].status = cc_to_error[cc];
-
-               if (cc != TD_CC_NOERROR)
-                       admhc_vdbg(ahcd,
-                               "urb %p iso td %p (%d) len %d cc %d\n",
-                               urb, td, 1 + td->index, dlen, cc);
-
-       /* BULK, INT, CONTROL ... drivers see aggregate length/status,
-        * except that "setup" bytes aren't counted and "short" transfers
-        * might not be reported as errors.
-        */
-       } else {
-               /* update packet status if needed (short is normally ok) */
-               if (cc == TD_CC_DATAUNDERRUN
-                               && !(urb->transfer_flags & URB_SHORT_NOT_OK))
-                       cc = TD_CC_NOERROR;
-
-               if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
-                       status = cc_to_error[cc];
-
-
-               /* count all non-empty packets except control SETUP packet */
-               if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0)
-                       urb->actual_length += tdDBP - td->data_dma + bl;
-
-               if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
-                       admhc_vdbg(ahcd,
-                               "urb %p td %p (%d) cc %d, len=%d/%d\n",
-                               urb, td, td->index, cc,
-                               urb->actual_length,
-                               urb->transfer_buffer_length);
-       }
-
-       list_del(&td->td_list);
-       urb_priv->td_idx++;
-
-       return status;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void ed_halted(struct admhcd *ahcd, struct td *td, int cc)
-{
-       struct urb              *urb = td->urb;
-       struct urb_priv         *urb_priv = urb->hcpriv;
-       struct ed               *ed = td->ed;
-       struct list_head        *tmp = td->td_list.next;
-       __hc32                  toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-       admhc_dump_ed(ahcd, "ed halted", td->ed, 1);
-       /* clear ed halt; this is the td that caused it, but keep it inactive
-        * until its urb->complete() has a chance to clean up.
-        */
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-
-       /* Get rid of all later tds from this urb. We don't have
-        * to be careful: no errors and nothing was transferred.
-        * Also patch the ed so it looks as if those tds completed normally.
-        */
-       while (tmp != &ed->td_list) {
-               struct td       *next;
-
-               next = list_entry(tmp, struct td, td_list);
-               tmp = next->td_list.next;
-
-               if (next->urb != urb)
-                       break;
-
-               /* NOTE: if multi-td control DATA segments get supported,
-                * this urb had one of them, this td wasn't the last td
-                * in that segment (TD_R clear), this ed halted because
-                * of a short read, _and_ URB_SHORT_NOT_OK is clear ...
-                * then we need to leave the control STATUS packet queued
-                * and clear ED_SKIP.
-                */
-               list_del(&next->td_list);
-               urb_priv->td_cnt++;
-               ed->hwHeadP = next->hwNextTD | toggle;
-       }
-
-       /* help for troubleshooting:  report anything that
-        * looks odd ... that doesn't include protocol stalls
-        * (or maybe some other things)
-        */
-       switch (cc) {
-       case TD_CC_DATAUNDERRUN:
-               if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
-                       break;
-               /* fallthrough */
-       case TD_CC_STALL:
-               if (usb_pipecontrol(urb->pipe))
-                       break;
-               /* fallthrough */
-       default:
-               admhc_dbg(ahcd,
-                       "urb %p path %s ep%d%s %08x cc %d --> status %d\n",
-                       urb, urb->dev->devpath,
-                       usb_pipeendpoint (urb->pipe),
-                       usb_pipein(urb->pipe) ? "in" : "out",
-                       hc32_to_cpu(ahcd, td->hwINFO),
-                       cc, cc_to_error[cc]);
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
-static void
-finish_unlinks(struct admhcd *ahcd, u16 tick)
-{
-       struct ed       *ed, **last;
-
-rescan_all:
-       for (last = &ahcd->ed_rm_list, ed = *last; ed != NULL; ed = *last) {
-               struct list_head        *entry, *tmp;
-               int                     completed, modified;
-               __hc32                  *prev;
-
-               /* only take off EDs that the HC isn't using, accounting for
-                * frame counter wraps and EDs with partially retired TDs
-                */
-               if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))) {
-                       if (tick_before(tick, ed->tick)) {
-skip_ed:
-                               last = &ed->ed_rm_next;
-                               continue;
-                       }
-#if 0
-                       if (!list_empty(&ed->td_list)) {
-                               struct td       *td;
-                               u32             head;
-
-                               td = list_entry(ed->td_list.next, struct td,
-                                                       td_list);
-                               head = hc32_to_cpu(ahcd, ed->hwHeadP) &
-                                                               TD_MASK;
-
-                               /* INTR_WDH may need to clean up first */
-                               if (td->td_dma != head)
-                                       goto skip_ed;
-                       }
-#endif
-               }
-
-               /* reentrancy:  if we drop the schedule lock, someone might
-                * have modified this list.  normally it's just prepending
-                * entries (which we'd ignore), but paranoia won't hurt.
-                */
-               *last = ed->ed_rm_next;
-               ed->ed_rm_next = NULL;
-               modified = 0;
-
-               /* unlink urbs as requested, but rescan the list after
-                * we call a completion since it might have unlinked
-                * another (earlier) urb
-                *
-                * When we get here, the HC doesn't see this ed.  But it
-                * must not be rescheduled until all completed URBs have
-                * been given back to the driver.
-                */
-rescan_this:
-               completed = 0;
-               prev = &ed->hwHeadP;
-               list_for_each_safe(entry, tmp, &ed->td_list) {
-                       struct td       *td;
-                       struct urb      *urb;
-                       struct urb_priv *urb_priv;
-                       __hc32          savebits;
-                       u32             tdINFO;
-                       int             status;
-
-                       td = list_entry(entry, struct td, td_list);
-                       urb = td->urb;
-                       urb_priv = td->urb->hcpriv;
-
-                       if (!urb->unlinked) {
-                               prev = &td->hwNextTD;
-                               continue;
-                       }
-
-                       if ((urb_priv) == NULL)
-                               continue;
-
-                       /* patch pointer hc uses */
-                       savebits = *prev & ~cpu_to_hc32(ahcd, TD_MASK);
-                       *prev = td->hwNextTD | savebits;
-                       /* If this was unlinked, the TD may not have been
-                        * retired ... so manually save dhe data toggle.
-                        * The controller ignores the value we save for
-                        * control and ISO endpoints.
-                        */
-                       tdINFO = hc32_to_cpup(ahcd, &td->hwINFO);
-                       if ((tdINFO & TD_T) == TD_T_DATA0)
-                               ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_C);
-                       else if ((tdINFO & TD_T) == TD_T_DATA1)
-                               ed->hwHeadP |= cpu_to_hc32(ahcd, ED_C);
-
-                       /* HC may have partly processed this TD */
-#ifdef ADMHC_VERBOSE_DEBUG
-                       urb_print(ahcd, urb, "PARTIAL", 0);
-#endif
-                       status = td_done(ahcd, urb, td);
-
-                       /* if URB is done, clean up */
-                       if (urb_priv->td_idx == urb_priv->td_cnt) {
-                               modified = completed = 1;
-                               finish_urb(ahcd, urb, status);
-                       }
-               }
-               if (completed && !list_empty(&ed->td_list))
-                       goto rescan_this;
-
-               /* ED's now officially unlinked, hc doesn't see */
-               ed->state = ED_IDLE;
-               ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-               ed->hwNextED = 0;
-               wmb();
-               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP | ED_DEQUEUE);
-
-               /* but if there's work queued, reschedule */
-               if (!list_empty(&ed->td_list)) {
-                       if (HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))
-                               ed_schedule(ahcd, ed);
-               }
-
-               if (modified)
-                       goto rescan_all;
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-/*
- * Process normal completions (error or success) and clean the schedules.
- *
- * This is the main path for handing urbs back to drivers.  The only other
- * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list,
- * instead of scanning the (re-reversed) donelist as this does.
- */
-
-static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb)
-{
-       struct list_head *entry, *tmp;
-       __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "UNHALT", ed, 0);
-#endif
-       /* clear ed halt; this is the td that caused it, but keep it inactive
-        * until its urb->complete() has a chance to clean up.
-        */
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-
-       list_for_each_safe(entry, tmp, &ed->td_list) {
-               struct td *td = list_entry(entry, struct td, td_list);
-               __hc32 info;
-
-               if (td->urb != urb)
-                       break;
-
-               info = td->hwINFO;
-               info &= ~cpu_to_hc32(ahcd, TD_CC | TD_OWN);
-               td->hwINFO = info;
-
-               ed->hwHeadP = td->hwNextTD | toggle;
-               wmb();
-       }
-
-}
-
-static void ed_intr_refill(struct admhcd *ahcd, struct ed *ed)
-{
-       __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-       ed->hwHeadP = ed->hwTailP | toggle;
-}
-
-
-static inline int is_ed_halted(struct admhcd *ahcd, struct ed *ed)
-{
-       return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) == ED_H);
-}
-
-static inline int is_td_halted(struct admhcd *ahcd, struct ed *ed,
-               struct td *td)
-{
-       return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & TD_MASK) ==
-               (hc32_to_cpup(ahcd, &td->hwNextTD) & TD_MASK));
-}
-
-static void ed_update(struct admhcd *ahcd, struct ed *ed)
-{
-       struct list_head *entry, *tmp;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "UPDATE", ed, 1);
-#endif
-
-       list_for_each_safe(entry, tmp, &ed->td_list) {
-               struct td *td = list_entry(entry, struct td, td_list);
-               struct urb *urb = td->urb;
-               struct urb_priv *urb_priv = urb->hcpriv;
-               int status;
-
-               if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
-                       break;
-
-               /* update URB's length and status from TD */
-               status = td_done(ahcd, urb, td);
-               if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td))
-                       ed_unhalt(ahcd, ed, urb);
-
-               if (ed->type == PIPE_INTERRUPT)
-                       ed_intr_refill(ahcd, ed);
-
-               /* If all this urb's TDs are done, call complete() */
-               if (urb_priv->td_idx == urb_priv->td_cnt)
-                       finish_urb(ahcd, urb, status);
-
-               /* clean schedule:  unlink EDs that are no longer busy */
-               if (list_empty(&ed->td_list)) {
-                       if (ed->state == ED_OPER)
-                               start_ed_unlink(ahcd, ed);
-
-               /* ... reenabling halted EDs only after fault cleanup */
-               } else if ((ed->hwINFO & cpu_to_hc32(ahcd,
-                                               ED_SKIP | ED_DEQUEUE))
-                                       == cpu_to_hc32(ahcd, ED_SKIP)) {
-                       td = list_entry(ed->td_list.next, struct td, td_list);
-#if 0
-                       if (!(td->hwINFO & cpu_to_hc32(ahcd, TD_DONE))) {
-                               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
-                               /* ... hc may need waking-up */
-                               switch (ed->type) {
-                               case PIPE_CONTROL:
-                                       admhc_writel(ahcd, OHCI_CLF,
-                                               &ahcd->regs->cmdstatus);
-                                       break;
-                               case PIPE_BULK:
-                                       admhc_writel(ahcd, OHCI_BLF,
-                                               &ahcd->regs->cmdstatus);
-                                       break;
-                               }
-                       }
-#else
-                       if ((td->hwINFO & cpu_to_hc32(ahcd, TD_OWN)))
-                               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
-#endif
-               }
-
-       }
-}
-
-/* there are some tds completed; called in_irq(), with HCD locked */
-static void admhc_td_complete(struct admhcd *ahcd)
-{
-       struct ed       *ed;
-
-       for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
-               if (ed->state != ED_OPER)
-                       continue;
-
-               ed_update(ahcd, ed);
-       }
-}
diff --git a/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120.h b/target/linux/adm5120/files-3.8/drivers/usb/host/adm5120.h
deleted file mode 100644 (file)
index e47aac8..0000000
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci.h
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*
- * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
- * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
- * host controller implementation.
- */
-typedef __u32 __bitwise __hc32;
-typedef __u16 __bitwise __hc16;
-
-/*
- * OHCI Endpoint Descriptor (ED) ... holds TD queue
- * See OHCI spec, section 4.2
- *
- * This is a "Queue Head" for those transfers, which is why
- * both EHCI and UHCI call similar structures a "QH".
- */
-
-#define TD_DATALEN_MAX 4096
-
-#define ED_ALIGN       16
-#define ED_MASK        ((u32)~(ED_ALIGN-1))    /* strip hw status in low addr bits */
-
-struct ed {
-       /* first fields are hardware-specified */
-       __hc32                  hwINFO;      /* endpoint config bitmap */
-       /* info bits defined by hcd */
-#define ED_DEQUEUE     (1 << 27)
-       /* info bits defined by the hardware */
-#define ED_MPS_SHIFT   16
-#define ED_MPS_MASK    ((1 << 11)-1)
-#define ED_MPS_GET(x)  (((x) >> ED_MPS_SHIFT) & ED_MPS_MASK)
-#define ED_ISO         (1 << 15)               /* isochronous endpoint */
-#define ED_SKIP                (1 << 14)
-#define ED_SPEED_FULL  (1 << 13)               /* fullspeed device */
-#define ED_INT         (1 << 11)               /* interrupt endpoint */
-#define ED_EN_SHIFT    7                       /* endpoint shift */
-#define ED_EN_MASK     ((1 << 4)-1)            /* endpoint mask */
-#define ED_EN_GET(x)   (((x) >> ED_EN_SHIFT) & ED_EN_MASK)
-#define ED_FA_MASK     ((1 << 7)-1)            /* function address mask */
-#define ED_FA_GET(x)   ((x) & ED_FA_MASK)
-       __hc32                  hwTailP;        /* tail of TD list */
-       __hc32                  hwHeadP;        /* head of TD list (hc r/w) */
-#define ED_C           (0x02)                  /* toggle carry */
-#define ED_H           (0x01)                  /* halted */
-       __hc32                  hwNextED;       /* next ED in list */
-
-       /* rest are purely for the driver's use */
-       dma_addr_t              dma;            /* addr of ED */
-       struct td               *dummy;         /* next TD to activate */
-
-       struct list_head        urb_list;       /* list of our URBs */
-
-       /* host's view of schedule */
-       struct ed               *ed_next;       /* on schedule list */
-       struct ed               *ed_prev;       /* for non-interrupt EDs */
-       struct ed               *ed_rm_next;    /* on rm list */
-       struct list_head        td_list;        /* "shadow list" of our TDs */
-
-       /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
-        * usually:  OPER --> UNLINK --> (IDLE | OPER) --> ...
-        */
-       u8                      state;          /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE                0x00            /* NOT linked to HC */
-#define ED_UNLINK      0x01            /* being unlinked from hc */
-#define ED_OPER                0x02            /* IS linked to hc */
-
-       u8                      type;           /* PIPE_{BULK,...} */
-
-       /* periodic scheduling params (for intr and iso) */
-       u8                      branch;
-       u16                     interval;
-       u16                     load;
-       u16                     last_iso;       /* iso only */
-
-       /* HC may see EDs on rm_list until next frame (frame_no == tick) */
-       u16                     tick;
-} __attribute__ ((aligned(ED_ALIGN)));
-
-/*
- * OHCI Transfer Descriptor (TD) ... one per transfer segment
- * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
- * and 4.3.2 (iso)
- */
-
-#define TD_ALIGN       32
-#define TD_MASK        ((u32)~(TD_ALIGN-1))    /* strip hw status in low addr bits */
-
-struct td {
-       /* first fields are hardware-specified */
-       __hc32          hwINFO;         /* transfer info bitmask */
-
-       /* hwINFO bits */
-#define TD_OWN         (1 << 31)               /* owner of the descriptor */
-#define TD_CC_SHIFT    27                      /* condition code */
-#define TD_CC_MASK     0xf
-#define TD_CC          (TD_CC_MASK << TD_CC_SHIFT)
-#define TD_CC_GET(x)   (((x) >> TD_CC_SHIFT) & TD_CC_MASK)
-
-#define TD_EC_SHIFT    25                      /* error count */
-#define TD_EC_MASK     0x3
-#define TD_EC          (TD_EC_MASK << TD_EC_SHIFT)
-#define TD_EC_GET(x)   ((x >> TD_EC_SHIFT) & TD_EC_MASK)
-#define TD_T_SHIFT     23                      /* data toggle state */
-#define TD_T_MASK      0x3
-#define TD_T           (TD_T_MASK << TD_T_SHIFT)
-#define TD_T_DATA0     (0x2 << TD_T_SHIFT)     /* DATA0 */
-#define TD_T_DATA1     (0x3 << TD_T_SHIFT)     /* DATA1 */
-#define TD_T_CARRY     (0x0 << TD_T_SHIFT)     /* uses ED_C */
-#define TD_T_GET(x)    (((x) >> TD_T_SHIFT) & TD_T_MASK)
-#define TD_DP_SHIFT    21                      /* direction/pid */
-#define TD_DP_MASK     0x3
-#define TD_DP          (TD_DP_MASK << TD_DP_SHIFT)
-#define TD_DP_GET      (((x) >> TD_DP_SHIFT) & TD_DP_MASK)
-#define TD_DP_SETUP    (0x0 << TD_DP_SHIFT)    /* SETUP pid */
-#define TD_DP_OUT      (0x1 << TD_DP_SHIFT)    /* OUT pid */
-#define TD_DP_IN       (0x2 << TD_DP_SHIFT)    /* IN pid */
-#define TD_ISI_SHIFT   8                       /* Interrupt Service Interval */
-#define TD_ISI_MASK    0x3f
-#define TD_ISI_GET(x)  (((x) >> TD_ISI_SHIFT) & TD_ISI_MASK)
-#define TD_FN_MASK     0x3f                    /* frame number */
-#define TD_FN_GET(x)   ((x) & TD_FN_MASK)
-
-       __hc32          hwDBP;          /* Data Buffer Pointer (or 0) */
-       __hc32          hwCBL;          /* Controller/Buffer Length */
-
-       /* hwCBL bits */
-#define TD_BL_MASK     0xffff          /* buffer length */
-#define TD_BL_GET(x)   ((x) & TD_BL_MASK)
-#define TD_IE          (1 << 16)       /* interrupt enable */
-       __hc32          hwNextTD;       /* Next TD Pointer */
-
-       /* rest are purely for the driver's use */
-       __u8            index;
-       struct ed       *ed;
-       struct td       *td_hash;       /* dma-->td hashtable */
-       struct td       *next_dl_td;
-       struct urb      *urb;
-
-       dma_addr_t      td_dma;         /* addr of this TD */
-       dma_addr_t      data_dma;       /* addr of data it points to */
-
-       struct list_head td_list;       /* "shadow list", TDs on same ED */
-
-       u32             flags;
-#define TD_FLAG_DONE   (1 << 17)       /* retired to done list */
-#define TD_FLAG_ISO    (1 << 16)       /* copy of ED_ISO */
-} __attribute__ ((aligned(TD_ALIGN))); /* c/b/i need 16; only iso needs 32 */
-
-/*
- * Hardware transfer status codes -- CC from td->hwINFO
- */
-#define TD_CC_NOERROR          0x00
-#define TD_CC_CRC              0x01
-#define TD_CC_BITSTUFFING      0x02
-#define TD_CC_DATATOGGLEM      0x03
-#define TD_CC_STALL            0x04
-#define TD_CC_DEVNOTRESP       0x05
-#define TD_CC_PIDCHECKFAIL     0x06
-#define TD_CC_UNEXPECTEDPID    0x07
-#define TD_CC_DATAOVERRUN      0x08
-#define TD_CC_DATAUNDERRUN     0x09
-    /* 0x0A, 0x0B reserved for hardware */
-#define TD_CC_BUFFEROVERRUN    0x0C
-#define TD_CC_BUFFERUNDERRUN   0x0D
-    /* 0x0E, 0x0F reserved for HCD */
-#define TD_CC_HCD0             0x0E
-#define TD_CC_NOTACCESSED      0x0F
-
-/*
- * preshifted status codes
- */
-#define TD_SCC_NOTACCESSED     (TD_CC_NOTACCESSED << TD_CC_SHIFT)
-
-
-/* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error[16] = {
-       /* No  Error  */        0,
-       /* CRC Error  */        -EILSEQ,
-       /* Bit Stuff  */        -EPROTO,
-       /* Data Togg  */        -EILSEQ,
-       /* Stall      */        -EPIPE,
-       /* DevNotResp */        -ETIME,
-       /* PIDCheck   */        -EPROTO,
-       /* UnExpPID   */        -EPROTO,
-       /* DataOver   */        -EOVERFLOW,
-       /* DataUnder  */        -EREMOTEIO,
-       /* (for hw)   */        -EIO,
-       /* (for hw)   */        -EIO,
-       /* BufferOver */        -ECOMM,
-       /* BuffUnder  */        -ENOSR,
-       /* (for HCD)  */        -EALREADY,
-       /* (for HCD)  */        -EALREADY
-};
-
-#define NUM_INTS       32
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O region.
- * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
- * Layout is in section 7 (and appendix B) of the spec.
- */
-struct admhcd_regs {
-       __hc32  gencontrol;     /* General Control */
-       __hc32  int_status;     /* Interrupt Status */
-       __hc32  int_enable;     /* Interrupt Enable */
-       __hc32  reserved00;
-       __hc32  host_control;   /* Host General Control */
-       __hc32  reserved01;
-       __hc32  fminterval;     /* Frame Interval */
-       __hc32  fmnumber;       /* Frame Number */
-       __hc32  reserved02;
-       __hc32  reserved03;
-       __hc32  reserved04;
-       __hc32  reserved05;
-       __hc32  reserved06;
-       __hc32  reserved07;
-       __hc32  reserved08;
-       __hc32  reserved09;
-       __hc32  reserved10;
-       __hc32  reserved11;
-       __hc32  reserved12;
-       __hc32  reserved13;
-       __hc32  reserved14;
-       __hc32  reserved15;
-       __hc32  reserved16;
-       __hc32  reserved17;
-       __hc32  reserved18;
-       __hc32  reserved19;
-       __hc32  reserved20;
-       __hc32  reserved21;
-       __hc32  lsthresh;       /* Low Speed Threshold */
-       __hc32  rhdesc;         /* Root Hub Descriptor */
-#define MAX_ROOT_PORTS 2
-       __hc32  portstatus[MAX_ROOT_PORTS]; /* Port Status */
-       __hc32  hosthead;       /* Host Descriptor Head */
-} __attribute__ ((aligned(32)));
-
-/*
- * General Control register bits
- */
-#define ADMHC_CTRL_UHFE        (1 << 0)        /* USB Host Function Enable */
-#define ADMHC_CTRL_SIR (1 << 1)        /* Software Interrupt request */
-#define ADMHC_CTRL_DMAA        (1 << 2)        /* DMA Arbitration Control */
-#define ADMHC_CTRL_SR  (1 << 3)        /* Software Reset */
-
-/*
- * Host General Control register bits
- */
-#define ADMHC_HC_BUSS          0x3             /* USB bus state */
-#define   ADMHC_BUSS_RESET     0x0
-#define   ADMHC_BUSS_RESUME    0x1
-#define   ADMHC_BUSS_OPER      0x2
-#define   ADMHC_BUSS_SUSPEND   0x3
-#define ADMHC_HC_DMAE          (1 << 2)        /* DMA enable */
-
-/*
- * Interrupt Status/Enable register bits
- */
-#define ADMHC_INTR_SOFI        (1 << 4)        /* start of frame */
-#define ADMHC_INTR_RESI        (1 << 5)        /* resume detected */
-#define ADMHC_INTR_6   (1 << 6)        /* unknown */
-#define ADMHC_INTR_7   (1 << 7)        /* unknown */
-#define ADMHC_INTR_BABI        (1 << 8)        /* babble detected */
-#define ADMHC_INTR_INSM        (1 << 9)        /* root hub status change */
-#define ADMHC_INTR_SO  (1 << 10)       /* scheduling overrun */
-#define ADMHC_INTR_FNO (1 << 11)       /* frame number overflow */
-#define ADMHC_INTR_TDC (1 << 20)       /* transfer descriptor completed */
-#define ADMHC_INTR_SWI (1 << 29)       /* software interrupt */
-#define ADMHC_INTR_FATI        (1 << 30)       /* fatal error */
-#define ADMHC_INTR_INTA        (1 << 31)       /* interrupt active */
-
-#define ADMHC_INTR_MIE (1 << 31)       /* master interrupt enable */
-
-/*
- * SOF Frame Interval register bits
- */
-#define ADMHC_SFI_FI_MASK      ((1 << 14)-1)   /* Frame Interval value */
-#define ADMHC_SFI_FSLDP_SHIFT  16
-#define ADMHC_SFI_FSLDP_MASK   ((1 << 15)-1)
-#define ADMHC_SFI_FIT          (1 << 31)       /* Frame Interval Toggle */
-
-/*
- * SOF Frame Number register bits
- */
-#define ADMHC_SFN_FN_MASK      ((1 << 16)-1)   /* Frame Number Mask */
-#define ADMHC_SFN_FR_SHIFT     16              /* Frame Remaining Shift */
-#define ADMHC_SFN_FR_MASK      ((1 << 14)-1)   /* Frame Remaining Mask */
-#define ADMHC_SFN_FRT          (1 << 31)       /* Frame Remaining Toggle */
-
-/*
- * Root Hub Descriptor register bits
- */
-#define ADMHC_RH_NUMP  0xff            /* number of ports */
-#define        ADMHC_RH_PSM    (1 << 8)        /* power switching mode */
-#define        ADMHC_RH_NPS    (1 << 9)        /* no power switching */
-#define        ADMHC_RH_OCPM   (1 << 10)       /* over current protection mode */
-#define        ADMHC_RH_NOCP   (1 << 11)       /* no over current protection */
-#define        ADMHC_RH_PPCM   (0xff << 16)    /* port power control */
-
-#define ADMHC_RH_LPS   (1 << 24)       /* local power switch */
-#define ADMHC_RH_OCI   (1 << 25)       /* over current indicator */
-
-/* status change bits */
-#define ADMHC_RH_LPSC  (1 << 26)       /* local power switch change */
-#define ADMHC_RH_OCIC  (1 << 27)       /* over current indicator change */
-
-#define ADMHC_RH_DRWE  (1 << 28)       /* device remote wakeup enable */
-#define ADMHC_RH_CRWE  (1 << 29)       /* clear remote wakeup enable */
-
-#define ADMHC_RH_CGP   (1 << 24)       /* clear global power */
-#define ADMHC_RH_SGP   (1 << 26)       /* set global power */
-
-/*
- * Port Status register bits
- */
-#define ADMHC_PS_CCS   (1 << 0)        /* current connect status */
-#define ADMHC_PS_PES   (1 << 1)        /* port enable status */
-#define ADMHC_PS_PSS   (1 << 2)        /* port suspend status */
-#define ADMHC_PS_POCI  (1 << 3)        /* port over current indicator */
-#define ADMHC_PS_PRS   (1 << 4)        /* port reset status */
-#define ADMHC_PS_PPS   (1 << 8)        /* port power status */
-#define ADMHC_PS_LSDA  (1 << 9)        /* low speed device attached */
-
-/* status change bits */
-#define ADMHC_PS_CSC   (1 << 16)       /* connect status change */
-#define ADMHC_PS_PESC  (1 << 17)       /* port enable status change */
-#define ADMHC_PS_PSSC  (1 << 18)       /* port suspend status change */
-#define ADMHC_PS_OCIC  (1 << 19)       /* over current indicator change */
-#define ADMHC_PS_PRSC  (1 << 20)       /* port reset status change */
-
-/* port feature bits */
-#define ADMHC_PS_CPE   (1 << 0)        /* clear port enable */
-#define ADMHC_PS_SPE   (1 << 1)        /* set port enable */
-#define ADMHC_PS_SPS   (1 << 2)        /* set port suspend */
-#define ADMHC_PS_CPS   (1 << 3)        /* clear suspend status */
-#define ADMHC_PS_SPR   (1 << 4)        /* set port reset */
-#define ADMHC_PS_SPP   (1 << 8)        /* set port power */
-#define ADMHC_PS_CPP   (1 << 9)        /* clear port power */
-
-/*
- * the POTPGT value is not defined in the ADMHC, so define a dummy value
- */
-#define ADMHC_POTPGT   2               /* in ms */
-
-/* hcd-private per-urb state */
-struct urb_priv {
-       struct ed               *ed;
-       struct list_head        pending;        /* URBs on the same ED */
-
-       u32                     td_cnt;         /* # tds in this request */
-       u32                     td_idx;         /* index of the current td */
-       struct td               *td[0];         /* all TDs in this request */
-};
-
-#define TD_HASH_SIZE    64    /* power'o'two */
-/* sizeof (struct td) ~= 64 == 2^6 ... */
-#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
-
-/*
- * This is the full ADMHCD controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-struct admhcd {
-       spinlock_t              lock;
-
-       /*
-        * I/O memory used to communicate with the HC (dma-consistent)
-        */
-       struct admhcd_regs __iomem *regs;
-
-       /*
-        * hcd adds to schedule for a live hc any time, but removals finish
-        * only at the start of the next frame.
-        */
-
-       struct ed               *ed_head;
-       struct ed               *ed_tails[4];
-
-       struct ed               *ed_rm_list;    /* to be removed */
-
-       struct ed               *periodic[NUM_INTS];    /* shadow int_table */
-
-#if 0  /* TODO: remove? */
-       /*
-        * OTG controllers and transceivers need software interaction;
-        * other external transceivers should be software-transparent
-        */
-       struct otg_transceiver  *transceiver;
-       void (*start_hnp)(struct admhcd *ahcd);
-#endif
-
-       /*
-        * memory management for queue data structures
-        */
-       struct dma_pool         *td_cache;
-       struct dma_pool         *ed_cache;
-       struct td               *td_hash[TD_HASH_SIZE];
-       struct list_head        pending;
-
-       /*
-        * driver state
-        */
-       int                     num_ports;
-       int                     load[NUM_INTS];
-       u32                     host_control;   /* copy of the host_control reg */
-       unsigned long           next_statechange;       /* suspend/resume */
-       u32                     fminterval;             /* saved register */
-       unsigned                autostop:1;     /* rh auto stopping/stopped */
-
-       unsigned long           flags;          /* for HC bugs */
-#define        OHCI_QUIRK_AMD756       0x01                    /* erratum #4 */
-#define        OHCI_QUIRK_SUPERIO      0x02                    /* natsemi */
-#define        OHCI_QUIRK_INITRESET    0x04                    /* SiS, OPTi, ... */
-#define        OHCI_QUIRK_BE_DESC      0x08                    /* BE descriptors */
-#define        OHCI_QUIRK_BE_MMIO      0x10                    /* BE registers */
-#define        OHCI_QUIRK_ZFMICRO      0x20                    /* Compaq ZFMicro chipset*/
-       /* there are also chip quirks/bugs in init logic */
-
-#ifdef DEBUG
-       struct dentry           *debug_dir;
-       struct dentry           *debug_async;
-       struct dentry           *debug_periodic;
-       struct dentry           *debug_registers;
-#endif
-};
-
-/* convert between an hcd pointer and the corresponding ahcd_hcd */
-static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
-{
-       return (struct admhcd *)(hcd->hcd_priv);
-}
-static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd)
-{
-       return container_of((void *)ahcd, struct usb_hcd, hcd_priv);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifndef DEBUG
-#define STUB_DEBUG_FILES
-#endif /* DEBUG */
-
-#ifdef DEBUG
-#      define admhc_dbg(ahcd, fmt, args...) \
-               printk(KERN_DEBUG "adm5120-hcd: " fmt, ## args)
-#else
-#      define admhc_dbg(ahcd, fmt, args...) do { } while (0)
-#endif
-
-#define admhc_err(ahcd, fmt, args...) \
-       printk(KERN_ERR "adm5120-hcd: " fmt, ## args)
-#define admhc_info(ahcd, fmt, args...) \
-       printk(KERN_INFO "adm5120-hcd: " fmt, ## args)
-#define admhc_warn(ahcd, fmt, args...) \
-       printk(KERN_WARNING "adm5120-hcd: " fmt, ## args)
-
-#ifdef ADMHC_VERBOSE_DEBUG
-#      define admhc_vdbg admhc_dbg
-#else
-#      define admhc_vdbg(ahcd, fmt, args...) do { } while (0)
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * While most USB host controllers implement their registers and
- * in-memory communication descriptors in little-endian format,
- * a minority (notably the IBM STB04XXX and the Motorola MPC5200
- * processors) implement them in big endian format.
- *
- * In addition some more exotic implementations like the Toshiba
- * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
- * they have a different endianness for registers vs. in-memory
- * descriptors.
- *
- * This attempts to support either format at compile time without a
- * runtime penalty, or both formats with the additional overhead
- * of checking a flag bit.
- *
- * That leads to some tricky Kconfig rules howevber. There are
- * different defaults based on some arch/ppc platforms, though
- * the basic rules are:
- *
- * Controller type              Kconfig options needed
- * ---------------              ----------------------
- * little endian                CONFIG_USB_ADMHC_LITTLE_ENDIAN
- *
- * fully big endian             CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_
- *                              CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
- *
- * mixed endian                 CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_
- *                              CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
- *
- * (If you have a mixed endian controller, you -must- also define
- * CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building
- * both your mixed endian and a fully big endian controller support in
- * the same kernel image).
- */
-
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC
-#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
-#define big_endian_desc(ahcd)  (ahcd->flags & OHCI_QUIRK_BE_DESC)
-#else
-#define big_endian_desc(ahcd)  1               /* only big endian */
-#endif
-#else
-#define big_endian_desc(ahcd)  0               /* only little endian */
-#endif
-
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
-#define big_endian_mmio(ahcd)  (ahcd->flags & OHCI_QUIRK_BE_MMIO)
-#else
-#define big_endian_mmio(ahcd)  1               /* only big endian */
-#endif
-#else
-#define big_endian_mmio(ahcd)  0               /* only little endian */
-#endif
-
-/*
- * Big-endian read/write functions are arch-specific.
- * Other arches can be added if/when they're needed.
- *
- */
-static inline unsigned int admhc_readl(const struct admhcd *ahcd,
-       __hc32 __iomem *regs)
-{
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-       return big_endian_mmio(ahcd) ?
-               readl_be(regs) :
-               readl(regs);
-#else
-       return readl(regs);
-#endif
-}
-
-static inline void admhc_writel(const struct admhcd *ahcd,
-       const unsigned int val, __hc32 __iomem *regs)
-{
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-       big_endian_mmio(ahcd) ?
-               writel_be(val, regs) :
-               writel(val, regs);
-#else
-               writel(val, regs);
-#endif
-}
-
-static inline void admhc_writel_flush(const struct admhcd *ahcd)
-{
-#if 0
-       /* TODO: remove? */
-       (void) admhc_readl(ahcd, &ahcd->regs->gencontrol);
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* cpu to ahcd */
-static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x)
-{
-       return big_endian_desc(ahcd) ?
-               (__force __hc16)cpu_to_be16(x) :
-               (__force __hc16)cpu_to_le16(x);
-}
-
-static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x)
-{
-       return big_endian_desc(ahcd) ?
-               cpu_to_be16p(x) :
-               cpu_to_le16p(x);
-}
-
-static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x)
-{
-       return big_endian_desc(ahcd) ?
-               (__force __hc32)cpu_to_be32(x) :
-               (__force __hc32)cpu_to_le32(x);
-}
-
-static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x)
-{
-       return big_endian_desc(ahcd) ?
-               cpu_to_be32p(x) :
-               cpu_to_le32p(x);
-}
-
-/* ahcd to cpu */
-static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x)
-{
-       return big_endian_desc(ahcd) ?
-               be16_to_cpu((__force __be16)x) :
-               le16_to_cpu((__force __le16)x);
-}
-
-static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x)
-{
-       return big_endian_desc(ahcd) ?
-               be16_to_cpup((__force __be16 *)x) :
-               le16_to_cpup((__force __le16 *)x);
-}
-
-static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x)
-{
-       return big_endian_desc(ahcd) ?
-               be32_to_cpu((__force __be32)x) :
-               le32_to_cpu((__force __le32)x);
-}
-
-static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x)
-{
-       return big_endian_desc(ahcd) ?
-               be32_to_cpup((__force __be32 *)x) :
-               le32_to_cpup((__force __le32 *)x);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline u16 admhc_frame_no(const struct admhcd *ahcd)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK;
-       return (u16)t;
-}
-
-static inline u16 admhc_frame_remain(const struct admhcd *ahcd)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT;
-       t &= ADMHC_SFN_FR_MASK;
-       return (u16)t;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline void admhc_disable(struct admhcd *ahcd)
-{
-       admhcd_to_hcd(ahcd)->state = HC_STATE_HALT;
-}
-
-#define        FI              0x2edf          /* 12000 bits per frame (-1) */
-#define        FSLDP(fi)       (0x7fff & ((6 * ((fi) - 1200)) / 7))
-#define        FIT             ADMHC_SFI_FIT
-#define LSTHRESH       0x628           /* lowspeed bit threshold */
-
-static inline void periodic_reinit(struct admhcd *ahcd)
-{
-#if 0
-       u32     fi = ahcd->fminterval & ADMHC_SFI_FI_MASK;
-       u32     fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
-
-       /* TODO: adjust FSLargestDataPacket value too? */
-       admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
-                                       &ahcd->regs->fminterval);
-#else
-       u32     fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
-
-       /* TODO: adjust FSLargestDataPacket value too? */
-       admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
-                                       &ahcd->regs->fminterval);
-#endif
-}
-
-static inline u32 admhc_read_rhdesc(struct admhcd *ahcd)
-{
-       return admhc_readl(ahcd, &ahcd->regs->rhdesc);
-}
-
-static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port)
-{
-       return admhc_readl(ahcd, &ahcd->regs->portstatus[port]);
-}
-
-static inline void admhc_write_portstatus(struct admhcd *ahcd, int port,
-               u32 value)
-{
-       admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]);
-}
-
-static inline void roothub_write_status(struct admhcd *ahcd, u32 value)
-{
-       /* FIXME: read-only bits must be masked out */
-       admhc_writel(ahcd, value, &ahcd->regs->rhdesc);
-}
-
-static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->int_enable);
-       t &= ~(ints);
-       admhc_writel(ahcd, t, &ahcd->regs->int_enable);
-       /* TODO: flush writes ?*/
-}
-
-static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->int_enable);
-       t |= ints;
-       admhc_writel(ahcd, t, &ahcd->regs->int_enable);
-       /* TODO: flush writes ?*/
-}
-
-static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints)
-{
-       admhc_writel(ahcd, ints, &ahcd->regs->int_status);
-}
-
-static inline void admhc_dma_enable(struct admhcd *ahcd)
-{
-       u32 t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->host_control);
-       if (t & ADMHC_HC_DMAE)
-               return;
-
-       t |= ADMHC_HC_DMAE;
-       admhc_writel(ahcd, t, &ahcd->regs->host_control);
-       admhc_vdbg(ahcd, "DMA enabled\n");
-}
-
-static inline void admhc_dma_disable(struct admhcd *ahcd)
-{
-       u32 t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->host_control);
-       if (!(t & ADMHC_HC_DMAE))
-               return;
-
-       t &= ~ADMHC_HC_DMAE;
-       admhc_writel(ahcd, t, &ahcd->regs->host_control);
-       admhc_vdbg(ahcd, "DMA disabled\n");
-}
diff --git a/target/linux/adm5120/files-3.8/drivers/watchdog/adm5120_wdt.c b/target/linux/adm5120/files-3.8/drivers/watchdog/adm5120_wdt.c
deleted file mode 100644 (file)
index d5d63b2..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- *     ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver
- *     Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2007
- *
- *     based on
- *
- *     RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver
- *
- *     This program is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     as published by the Free Software Foundation; either version
- *     2 of the License, or (at your option) any later version.
- *
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/irq.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define DEFAULT_TIMEOUT        15              /* (secs) Default is 15 seconds */
-#define MAX_TIMEOUT    327
-/* Max is 327 seconds, counter is 15-bit integer, step is 10 ms */
-
-#define NAME "adm5120_wdt"
-#define VERSION "0.1"
-
-static int expect_close;
-static int access;
-static unsigned int timeout = DEFAULT_TIMEOUT;
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_LICENSE("GPL");
-
-
-static inline void wdt_set_timeout(void)
-{
-       u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16);
-       SW_WRITE_REG(SWITCH_REG_WDOG0, val);
-}
-
-/*
-   It looks like WDOG0-register-write don't modify counter,
-   but WDOG0-register-read resets counter.
-*/
-
-static inline void wdt_reset_counter(void)
-{
-       SW_READ_REG(SWITCH_REG_WDOG0);
-}
-
-static inline void wdt_disable(void)
-{
-       SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000);
-}
-
-
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
-       /* Allow only one person to hold it open */
-       if (access)
-               return -EBUSY;
-
-       if (nowayout)
-               __module_get(THIS_MODULE);
-
-       /* Activate timer */
-       wdt_reset_counter();
-       wdt_set_timeout();
-       printk(KERN_INFO NAME ": enabling watchdog timer\n");
-       access = 1;
-       return 0;
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
-       /*
-        * Shut off the timer.
-        * Lock it in if it's a module and we set nowayout
-        */
-       if (expect_close && (nowayout == 0)) {
-               wdt_disable();
-               printk(KERN_INFO NAME ": disabling watchdog timer\n");
-               module_put(THIS_MODULE);
-       } else
-               printk(KERN_CRIT NAME ": device closed unexpectedly.  WDT will not stop!\n");
-
-       access = 0;
-       return 0;
-}
-
-static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-{
-       /* Refresh the timer. */
-       if (len) {
-               if (!nowayout) {
-                       size_t i;
-
-                       /* In case it was set long ago */
-                       expect_close = 0;
-
-                       for (i = 0; i != len; i++) {
-                               char c;
-                               if (get_user(c, data + i))
-                                       return -EFAULT;
-                               if (c == 'V')
-                                       expect_close = 1;
-                       }
-               }
-               wdt_reset_counter();
-               return len;
-       }
-       return 0;
-}
-
-static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-       int new_timeout;
-       static struct watchdog_info ident = {
-               .options =              WDIOF_SETTIMEOUT |
-                                       WDIOF_KEEPALIVEPING |
-                                       WDIOF_MAGICCLOSE,
-               .firmware_version =     0,
-               .identity =             "ADM5120_WDT Watchdog",
-       };
-       switch (cmd) {
-       default:
-               return -ENOTTY;
-       case WDIOC_GETSUPPORT:
-               if (copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
-                       return -EFAULT;
-               return 0;
-       case WDIOC_GETSTATUS:
-       case WDIOC_GETBOOTSTATUS:
-               return put_user(0, (int *)arg);
-       case WDIOC_KEEPALIVE:
-               wdt_reset_counter();
-               return 0;
-       case WDIOC_SETTIMEOUT:
-               if (get_user(new_timeout, (int *)arg))
-                       return -EFAULT;
-               if (new_timeout < 1)
-                       return -EINVAL;
-               if (new_timeout > MAX_TIMEOUT)
-                       return -EINVAL;
-               timeout = new_timeout;
-               wdt_set_timeout();
-               /* Fall */
-       case WDIOC_GETTIMEOUT:
-               return put_user(timeout, (int *)arg);
-       }
-}
-
-static const struct file_operations wdt_fops = {
-       .owner          = THIS_MODULE,
-       .llseek         = no_llseek,
-       .write          = wdt_write,
-       .unlocked_ioctl = wdt_ioctl,
-       .open           = wdt_open,
-       .release        = wdt_release,
-};
-
-static struct miscdevice wdt_miscdev = {
-       .minor          = WATCHDOG_MINOR,
-       .name           = "watchdog",
-       .fops           = &wdt_fops,
-};
-
-static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION "\n";
-
-static int __init watchdog_init(void)
-{
-       int ret;
-
-       ret = misc_register(&wdt_miscdev);
-
-       if (ret)
-               return ret;
-
-       wdt_disable();
-       printk(banner);
-
-       return 0;
-}
-
-static void __exit watchdog_exit(void)
-{
-       misc_deregister(&wdt_miscdev);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_exit);
diff --git a/target/linux/adm5120/patches-3.14/001-adm5120.patch b/target/linux/adm5120/patches-3.14/001-adm5120.patch
deleted file mode 100644 (file)
index 4f58001..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -56,6 +56,24 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config ADM5120
-+      bool "Infineon/ADMtek ADM5120 SoC based machines"
-+      select BOOT_RAW
-+      select NO_EXCEPT_FILL
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select ARCH_REQUIRE_GPIOLIB
-+      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+      select MIPS_MACHINE
-+      select HAVE_CLK
-+
- config MIPS_ALCHEMY
-       bool "Alchemy processor based machines"
-       select 64BIT_PHYS_ADDR
-@@ -795,6 +813,7 @@ config NLM_XLP_BOARD
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -1,5 +1,6 @@
- # All platforms listed in alphabetic order
-+platforms += adm5120
- platforms += alchemy
- platforms += ar7
- platforms += ath79
diff --git a/target/linux/adm5120/patches-3.14/002-adm5120_flash.patch b/target/linux/adm5120/patches-3.14/002-adm5120_flash.patch
deleted file mode 100644 (file)
index 8936af1..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR
-           If compiled as a module, it will be called latch-addr-flash.
-+config MTD_ADM5120
-+      tristate "Map driver for ADM5120 based boards"
-+      depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_SUN_UFLASH) += sun_ufla
- obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
-+obj-$(CONFIG_MTD_ADM5120)     += adm5120-flash.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o
- obj-$(CONFIG_MTD_UCLINUX)     += uclinux.o
- obj-$(CONFIG_MTD_NETtel)      += nettel.o
diff --git a/target/linux/adm5120/patches-3.14/003-adm5120_switch.patch b/target/linux/adm5120/patches-3.14/003-adm5120_switch.patch
deleted file mode 100644 (file)
index 273dc39..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -268,6 +268,10 @@ source "drivers/net/dsa/Kconfig"
- source "drivers/net/ethernet/Kconfig"
-+config ADM5120_ENET
-+      tristate "ADM5120 Ethernet switch support"
-+      depends on ADM5120
-+
- source "drivers/net/fddi/Kconfig"
- source "drivers/net/hippi/Kconfig"
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_CAN) += can/
- obj-$(CONFIG_ETRAX_ETHERNET) += cris/
- obj-$(CONFIG_NET_DSA) += dsa/
- obj-$(CONFIG_ETHERNET) += ethernet/
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_FDDI) += fddi/
- obj-$(CONFIG_HIPPI) += hippi/
- obj-$(CONFIG_HAMRADIO) += hamradio/
diff --git a/target/linux/adm5120/patches-3.14/005-adm5120_usb.patch b/target/linux/adm5120/patches-3.14/005-adm5120_usb.patch
deleted file mode 100644 (file)
index 2a6846d..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_DWC2)               += dwc2/
- obj-$(CONFIG_USB_MON)         += mon/
- obj-$(CONFIG_PCI)             += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
- obj-$(CONFIG_USB_EHCI_HCD)    += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
- obj-$(CONFIG_USB_OHCI_HCD)    += host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -3,6 +3,10 @@
- #
- comment "USB Host Controller Drivers"
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+      depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
-       tristate "Cypress C67x00 HCD support"
-       help
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_USB_WHCI_HCD)   += whci/
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_EHCI_PCI)    += ehci-pci.o
- obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)   += ehci-platform.o
diff --git a/target/linux/adm5120/patches-3.14/007-adm5120_pci.patch b/target/linux/adm5120/patches-3.14/007-adm5120_pci.patch
deleted file mode 100644 (file)
index 02bd5f4..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)     += ops-tx4927.o
- obj-$(CONFIG_BCM47XX)         += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
-                                       ops-bcm63xx.o
-+obj-$(CONFIG_ADM5120)         += pci-adm5120.o
- obj-$(CONFIG_MIPS_ALCHEMY)    += pci-alchemy.o
- obj-$(CONFIG_SOC_AR71XX)      += pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)      += pci-ar724x.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1817,6 +1817,9 @@
- #define PCI_VENDOR_ID_CB              0x1307  /* Measurement Computing */
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-3.14/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-3.14/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644 (file)
index 698b669..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -490,4 +490,12 @@ config LEDS_BLINKM
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+      tristate "LED ADM5120 Switch Port Status Trigger"
-+      depends on LEDS_TRIGGERS && ADM5120
-+      help
-+        This allows LEDs to be controlled by the port states of
-+        the ADM5120 built-in Ethernet Switch
-+        If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -63,3 +63,4 @@ obj-$(CONFIG_LEDS_TRIGGERS)          += trigger/
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)     += ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV)     += ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-3.14/050-revert_rootfs_splits.patch b/target/linux/adm5120/patches-3.14/050-revert_rootfs_splits.patch
deleted file mode 100644 (file)
index dd41b2b..0000000
+++ /dev/null
@@ -1,356 +0,0 @@
-Index: linux-3.14.27/drivers/mtd/mtdpart.c
-===================================================================
---- linux-3.14.27.orig/drivers/mtd/mtdpart.c
-+++ linux-3.14.27/drivers/mtd/mtdpart.c
-@@ -29,11 +29,9 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
--#include <linux/magic.h>
- #include <linux/err.h>
- #include "mtdcore.h"
--#include "mtdsplit/mtdsplit.h"
- #define MTD_ERASE_PARTIAL     0x8000 /* partition only covers parts of an erase block */
-@@ -49,14 +47,13 @@ struct mtd_part {
-       struct list_head list;
- };
--static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
--
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-  * the pointer to that structure with this macro.
-  */
- #define PART(x)  ((struct mtd_part *)(x))
-+
- /*
-  * MTD methods which simply translate the effective address and pass through
-  * to the _real_ device.
-@@ -509,12 +506,14 @@ static struct mtd_part *allocate_partiti
-       if (slave->offset == MTDPART_OFS_APPEND)
-               slave->offset = cur_offset;
-       if (slave->offset == MTDPART_OFS_NXTBLK) {
--              /* Round up to next erasesize */
--              slave->offset = mtd_roundup_to_eb(cur_offset, master);
--              if (slave->offset != cur_offset)
-+              slave->offset = cur_offset;
-+              if (mtd_mod_by_eb(cur_offset, master) != 0) {
-+                      /* Round up to next erasesize */
-+                      slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
-                       printk(KERN_NOTICE "Moving partition %d: "
-                              "0x%012llx -> 0x%012llx\n", partno,
-                              (unsigned long long)cur_offset, (unsigned long long)slave->offset);
-+              }
-       }
-       if (slave->offset == MTDPART_OFS_RETAIN) {
-               slave->offset = cur_offset;
-@@ -616,10 +615,8 @@ out_register:
-       return slave;
- }
--
--static int
--__mtd_add_partition(struct mtd_info *master, const char *name,
--                  long long offset, long long length, bool dup_check)
-+int mtd_add_partition(struct mtd_info *master, const char *name,
-+                    long long offset, long long length)
- {
-       struct mtd_partition part;
-       struct mtd_part *p, *new;
-@@ -651,24 +648,21 @@ __mtd_add_partition(struct mtd_info *mas
-       end = offset + length;
-       mutex_lock(&mtd_partitions_mutex);
--      if (dup_check) {
--              list_for_each_entry(p, &mtd_partitions, list)
--                      if (p->master == master) {
--                              if ((start >= p->offset) &&
--                                  (start < (p->offset + p->mtd.size)))
--                                      goto err_inv;
--
--                              if ((end >= p->offset) &&
--                                  (end < (p->offset + p->mtd.size)))
--                                      goto err_inv;
--                      }
--      }
-+      list_for_each_entry(p, &mtd_partitions, list)
-+              if (p->master == master) {
-+                      if ((start >= p->offset) &&
-+                          (start < (p->offset + p->mtd.size)))
-+                              goto err_inv;
-+
-+                      if ((end >= p->offset) &&
-+                          (end < (p->offset + p->mtd.size)))
-+                              goto err_inv;
-+              }
-       list_add(&new->list, &mtd_partitions);
-       mutex_unlock(&mtd_partitions_mutex);
-       add_mtd_device(&new->mtd);
--      mtd_partition_split(master, new);
-       return ret;
- err_inv:
-@@ -678,12 +672,6 @@ err_inv:
- }
- EXPORT_SYMBOL_GPL(mtd_add_partition);
--int mtd_add_partition(struct mtd_info *master, const char *name,
--                    long long offset, long long length)
--{
--      return __mtd_add_partition(master, name, offset, length, true);
--}
--
- int mtd_del_partition(struct mtd_info *master, int partno)
- {
-       struct mtd_part *slave, *next;
-@@ -707,166 +695,6 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
--static int
--run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
--{
--      struct mtd_partition *parts;
--      int nr_parts;
--      int i;
--
--      nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, &parts,
--                                              NULL);
--      if (nr_parts <= 0)
--              return nr_parts;
--
--      if (WARN_ON(!parts))
--              return 0;
--
--      for (i = 0; i < nr_parts; i++) {
--              /* adjust partition offsets */
--              parts[i].offset += slave->offset;
--
--              __mtd_add_partition(slave->master,
--                                  parts[i].name,
--                                  parts[i].offset,
--                                  parts[i].size,
--                                  false);
--      }
--
--      kfree(parts);
--
--      return nr_parts;
--}
--
--static inline unsigned long
--mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
--{
--      unsigned long mask = mtd->erasesize - 1;
--
--      len += offset & mask;
--      len = (len + mask) & ~mask;
--      len -= offset & mask;
--      return len;
--}
--
--static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
--{
--      size_t squashfs_len;
--      int len, ret;
--
--      ret = mtd_get_squashfs_len(master, offset, &squashfs_len);
--      if (ret)
--              return ret;
--
--      len = mtd_pad_erasesize(master, offset, squashfs_len);
--      *split_offset = offset + len;
--
--      return 0;
--}
--
--static void split_rootfs_data(struct mtd_info *master, struct mtd_part *part)
--{
--      unsigned int split_offset = 0;
--      unsigned int split_size;
--      int ret;
--
--      ret = split_squashfs(master, part->offset, &split_offset);
--      if (ret)
--              return;
--
--      if (split_offset <= 0)
--              return;
--
--      if (config_enabled(CONFIG_MTD_SPLIT_SQUASHFS_ROOT))
--              pr_err("Dedicated partitioner didn't create \"rootfs_data\" partition, please fill a bug report!\n");
--      else
--              pr_warn("Support for built-in \"rootfs_data\" splitter will be removed, please use CONFIG_MTD_SPLIT_SQUASHFS_ROOT\n");
--
--      split_size = part->mtd.size - (split_offset - part->offset);
--      printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=0x%x, len=0x%x\n",
--              ROOTFS_SPLIT_NAME, split_offset, split_size);
--
--      __mtd_add_partition(master, ROOTFS_SPLIT_NAME, split_offset,
--                          split_size, false);
--}
--
--#define UBOOT_MAGIC   0x27051956
--
--static void split_uimage(struct mtd_info *master, struct mtd_part *part)
--{
--      struct {
--              __be32 magic;
--              __be32 pad[2];
--              __be32 size;
--      } hdr;
--      size_t len;
--
--      if (mtd_read(master, part->offset, sizeof(hdr), &len, (void *) &hdr))
--              return;
--
--      if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
--              return;
--
--      len = be32_to_cpu(hdr.size) + 0x40;
--      len = mtd_pad_erasesize(master, part->offset, len);
--      if (len + master->erasesize > part->mtd.size)
--              return;
--
--      if (config_enabled(CONFIG_MTD_SPLIT_UIMAGE_FW))
--              pr_err("Dedicated partitioner didn't split firmware partition, please fill a bug report!\n");
--      else
--              pr_warn("Support for built-in firmware splitter will be removed, please use CONFIG_MTD_SPLIT_UIMAGE_FW\n");
--
--      __mtd_add_partition(master, "rootfs", part->offset + len,
--                          part->mtd.size - len, false);
--}
--
--#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
--#define SPLIT_FIRMWARE_NAME   CONFIG_MTD_SPLIT_FIRMWARE_NAME
--#else
--#define SPLIT_FIRMWARE_NAME   "unused"
--#endif
--
--static void split_firmware(struct mtd_info *master, struct mtd_part *part)
--{
--      int ret;
--
--      ret = run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
--      if (ret > 0)
--              return;
--
--      if (config_enabled(CONFIG_MTD_UIMAGE_SPLIT))
--              split_uimage(master, part);
--}
--
--void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
--                                int offset, int size)
--{
--}
--
--static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
--{
--      static int rootfs_found = 0;
--
--      if (rootfs_found)
--              return;
--
--      if (!strcmp(part->mtd.name, "rootfs")) {
--              int num = run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
--
--              if (num <= 0 && config_enabled(CONFIG_MTD_ROOTFS_SPLIT))
--                      split_rootfs_data(master, part);
--
--              rootfs_found = 1;
--      }
--
--      if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
--          config_enabled(CONFIG_MTD_SPLIT_FIRMWARE))
--              split_firmware(master, part);
--
--      arch_split_mtd_part(master, part->mtd.name, part->offset,
--                          part->mtd.size);
--}
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -896,7 +724,6 @@ int add_mtd_partitions(struct mtd_info *
-               mutex_unlock(&mtd_partitions_mutex);
-               add_mtd_device(&slave->mtd);
--              mtd_partition_split(master, slave);
-               cur_offset = slave->offset + slave->mtd.size;
-       }
-@@ -926,30 +753,6 @@ static struct mtd_part_parser *get_parti
- #define put_partition_parser(p) do { module_put((p)->owner); } while (0)
--static struct mtd_part_parser *
--get_partition_parser_by_type(enum mtd_parser_type type,
--                           struct mtd_part_parser *start)
--{
--      struct mtd_part_parser *p, *ret = NULL;
--
--      spin_lock(&part_parser_lock);
--
--      p = list_prepare_entry(start, &part_parsers, list);
--      if (start)
--              put_partition_parser(start);
--
--      list_for_each_entry_continue(p, &part_parsers, list) {
--              if (p->type == type && try_module_get(p->owner)) {
--                      ret = p;
--                      break;
--              }
--      }
--
--      spin_unlock(&part_parser_lock);
--
--      return ret;
--}
--
- void register_mtd_parser(struct mtd_part_parser *p)
- {
-       spin_lock(&part_parser_lock);
-@@ -1023,38 +826,6 @@ int parse_mtd_partitions(struct mtd_info
-       return ret;
- }
--int parse_mtd_partitions_by_type(struct mtd_info *master,
--                               enum mtd_parser_type type,
--                               struct mtd_partition **pparts,
--                               struct mtd_part_parser_data *data)
--{
--      struct mtd_part_parser *prev = NULL;
--      int ret = 0;
--
--      while (1) {
--              struct mtd_part_parser *parser;
--
--              parser = get_partition_parser_by_type(type, prev);
--              if (!parser)
--                      break;
--
--              ret = (*parser->parse_fn)(master, pparts, data);
--
--              if (ret > 0) {
--                      put_partition_parser(parser);
--                      printk(KERN_NOTICE
--                             "%d %s partitions found on MTD device %s\n",
--                             ret, parser->name, master->name);
--                      break;
--              }
--
--              prev = parser;
--      }
--
--      return ret;
--}
--EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type);
--
- int mtd_is_partition(const struct mtd_info *mtd)
- {
-       struct mtd_part *part;
diff --git a/target/linux/adm5120/patches-3.14/100-rootfs_split.patch b/target/linux/adm5120/patches-3.14/100-rootfs_split.patch
deleted file mode 100644 (file)
index 54270bb..0000000
+++ /dev/null
@@ -1,328 +0,0 @@
-Index: linux-3.14.27/drivers/mtd/Kconfig
-===================================================================
---- linux-3.14.27.orig/drivers/mtd/Kconfig
-+++ linux-3.14.27/drivers/mtd/Kconfig
-@@ -52,6 +52,14 @@ config MTD_TESTS
-         WARNING: some of the tests will ERASE entire MTD device which they
-         test. Do not use these tests unless you really know what you do.
-+config MTD_ROOTFS_ROOT_DEV
-+      bool "Automatically set 'rootfs' partition to be root filesystem"
-+      default y
-+
-+config MTD_ROOTFS_SPLIT
-+      bool "Automatically split 'rootfs' partition for squashfs"
-+      default y
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       ---help---
-Index: linux-3.14.27/drivers/mtd/mtdpart.c
-===================================================================
---- linux-3.14.27.orig/drivers/mtd/mtdpart.c
-+++ linux-3.14.27/drivers/mtd/mtdpart.c
-@@ -29,6 +29,8 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/root_dev.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
- #include "mtdcore.h"
-@@ -52,7 +54,7 @@ struct mtd_part {
-  * the pointer to that structure with this macro.
-  */
- #define PART(x)  ((struct mtd_part *)(x))
--
-+#define IS_PART(mtd) (mtd->_read == part_read)
- /*
-  * MTD methods which simply translate the effective address and pass through
-@@ -695,6 +697,144 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+#define ROOTFS_SPLIT_NAME "rootfs_data"
-+#define ROOTFS_REMOVED_NAME "<removed>"
-+
-+struct squashfs_super_block {
-+      __le32 s_magic;
-+      __le32 pad0[9];
-+      __le64 bytes_used;
-+};
-+
-+
-+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
-+{
-+      struct squashfs_super_block sb;
-+      int len, ret;
-+
-+      ret = mtd_read(master, offset, sizeof(sb), &len, (void *) &sb);
-+      if (ret || (len != sizeof(sb))) {
-+              printk(KERN_ALERT "split_squashfs: error occured while reading "
-+                      "from \"%s\"\n", master->name);
-+              return -EINVAL;
-+      }
-+
-+      if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
-+              printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
-+                      master->name);
-+              *split_offset = 0;
-+              return 0;
-+      }
-+
-+      if (le64_to_cpu((sb.bytes_used)) <= 0) {
-+              printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
-+                      master->name);
-+              *split_offset = 0;
-+              return 0;
-+      }
-+
-+      len = (u32) le64_to_cpu(sb.bytes_used);
-+      len += (offset & 0x000fffff);
-+      len +=  (master->erasesize - 1);
-+      len &= ~(master->erasesize - 1);
-+      len -= (offset & 0x000fffff);
-+      *split_offset = offset + len;
-+
-+      return 0;
-+}
-+
-+static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
-+{
-+      struct mtd_partition dpart;
-+      struct mtd_part *slave = NULL;
-+      struct mtd_part *spart;
-+      int ret, split_offset = 0;
-+
-+      spart = PART(rpart);
-+      ret = split_squashfs(master, spart->offset, &split_offset);
-+      if (ret)
-+              return ret;
-+
-+      if (split_offset <= 0)
-+              return 0;
-+
-+      memcpy(&dpart, part, sizeof(dpart));
-+      dpart.name = ROOTFS_SPLIT_NAME;
-+
-+      dpart.size = rpart->size - (split_offset - spart->offset);
-+      dpart.offset = split_offset;
-+
-+      printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
-+              ROOTFS_SPLIT_NAME, dpart.offset, dpart.size);
-+
-+      slave = allocate_partition(master, &dpart, 0, split_offset);
-+      if (IS_ERR(slave))
-+              return PTR_ERR(slave);
-+      mutex_lock(&mtd_partitions_mutex);
-+      list_add(&slave->list, &mtd_partitions);
-+      mutex_unlock(&mtd_partitions_mutex);
-+
-+      add_mtd_device(&slave->mtd);
-+
-+      rpart->split = &slave->mtd;
-+
-+      return 0;
-+}
-+
-+static int refresh_rootfs_split(struct mtd_info *mtd)
-+{
-+      struct mtd_partition tpart;
-+      struct mtd_part *part;
-+      char *name;
-+      //int index = 0;
-+      int offset, size;
-+      int ret;
-+
-+      part = PART(mtd);
-+
-+      /* check for the new squashfs offset first */
-+      ret = split_squashfs(part->master, part->offset, &offset);
-+      if (ret)
-+              return ret;
-+
-+      if ((offset > 0) && !mtd->split) {
-+              printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
-+              /* if we don't have a rootfs split partition, create a new one */
-+              tpart.name = (char *) mtd->name;
-+              tpart.size = mtd->size;
-+              tpart.offset = part->offset;
-+
-+              return split_rootfs_data(part->master, &part->mtd, &tpart);
-+      } else if ((offset > 0) && mtd->split) {
-+              /* update the offsets of the existing partition */
-+              size = mtd->size + part->offset - offset;
-+
-+              part = PART(mtd->split);
-+              part->offset = offset;
-+              part->mtd.size = size;
-+              printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
-+                      __func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
-+                      (u32) part->offset, (u32) part->mtd.size);
-+              name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+              strcpy(name, ROOTFS_SPLIT_NAME);
-+              part->mtd.name = name;
-+      } else if ((offset <= 0) && mtd->split) {
-+              printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
-+
-+              /* mark existing partition as removed */
-+              part = PART(mtd->split);
-+              name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+              strcpy(name, ROOTFS_REMOVED_NAME);
-+              part->mtd.name = name;
-+              part->offset = 0;
-+              part->mtd.size = 0;
-+      }
-+
-+      return 0;
-+}
-+#endif /* CONFIG_MTD_ROOTFS_SPLIT */
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -711,6 +851,9 @@ int add_mtd_partitions(struct mtd_info *
-       struct mtd_part *slave;
-       uint64_t cur_offset = 0;
-       int i;
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+      int ret;
-+#endif
-       printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
-@@ -725,12 +868,53 @@ int add_mtd_partitions(struct mtd_info *
-               add_mtd_device(&slave->mtd);
-+              if (!strcmp(parts[i].name, "rootfs")) {
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+                      if (ROOT_DEV == 0) {
-+                              printk(KERN_NOTICE "mtd: partition \"rootfs\" "
-+                                      "set to be root filesystem\n");
-+                              ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
-+                      }
-+#endif
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+                      ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
-+                      /* if (ret == 0)
-+                       *      j++; */
-+#endif
-+              }
-+
-               cur_offset = slave->offset + slave->mtd.size;
-       }
-       return 0;
- }
-+int mtd_device_refresh(struct mtd_info *mtd)
-+{
-+      int ret = 0;
-+
-+      if (IS_PART(mtd)) {
-+              struct mtd_part *part;
-+              struct mtd_info *master;
-+
-+              part = PART(mtd);
-+              master = part->master;
-+              if (master->refresh_device)
-+                      ret = master->refresh_device(master);
-+      }
-+
-+      if (!ret && mtd->refresh_device)
-+              ret = mtd->refresh_device(mtd);
-+
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+      if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
-+              refresh_rootfs_split(mtd);
-+#endif
-+
-+      return 0;
-+}
-+EXPORT_SYMBOL_GPL(mtd_device_refresh);
-+
- static DEFINE_SPINLOCK(part_parser_lock);
- static LIST_HEAD(part_parsers);
-Index: linux-3.14.27/drivers/mtd/mtdchar.c
-===================================================================
---- linux-3.14.27.orig/drivers/mtd/mtdchar.c
-+++ linux-3.14.27/drivers/mtd/mtdchar.c
-@@ -993,6 +993,12 @@ static int mtdchar_ioctl(struct file *fi
-               break;
-       }
-+      case MTDREFRESH:
-+      {
-+              ret = mtd_device_refresh(mtd);
-+              break;
-+      }
-+
-       default:
-               ret = -ENOTTY;
-       }
-Index: linux-3.14.27/include/linux/mtd/mtd.h
-===================================================================
---- linux-3.14.27.orig/include/linux/mtd/mtd.h
-+++ linux-3.14.27/include/linux/mtd/mtd.h
-@@ -115,6 +115,7 @@ struct nand_ecclayout {
- struct module;        /* only needed for owner field in mtd_info */
-+struct mtd_info;
- struct mtd_info {
-       u_char type;
-       uint32_t flags;
-@@ -230,6 +231,9 @@ struct mtd_info {
-       int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
-       int (*_suspend) (struct mtd_info *mtd);
-       void (*_resume) (struct mtd_info *mtd);
-+      int (*refresh_device)(struct mtd_info *mtd);
-+      struct mtd_info *split;
-+
-       /*
-        * If the driver is something smart, like UBI, it may need to maintain
-        * its own reference counting. The below functions are only for driver.
-@@ -395,6 +399,7 @@ extern int mtd_device_parse_register(str
-                                    int defnr_parts);
- #define mtd_device_register(master, parts, nr_parts)  \
-       mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
-+extern int mtd_device_refresh(struct mtd_info *master);
- extern int mtd_device_unregister(struct mtd_info *master);
- extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
- extern int __get_mtd_device(struct mtd_info *mtd);
-Index: linux-3.14.27/include/linux/mtd/partitions.h
-===================================================================
---- linux-3.14.27.orig/include/linux/mtd/partitions.h
-+++ linux-3.14.27/include/linux/mtd/partitions.h
-@@ -37,12 +37,14 @@
-  */
- struct mtd_info;
-+struct mtd_partition;
- struct mtd_partition {
-       const char *name;               /* identifier string */
-       uint64_t size;                  /* partition size */
-       uint64_t offset;                /* offset within the master MTD space */
-       uint32_t mask_flags;            /* master MTD flags to mask out for this partition */
-       struct nand_ecclayout *ecclayout;       /* out of band layout for this partition (NAND only) */
-+      int (*refresh_partition)(struct mtd_info *);
- };
- #define MTDPART_OFS_RETAIN    (-3)
-Index: linux-3.14.27/include/uapi/mtd/mtd-abi.h
-===================================================================
---- linux-3.14.27.orig/include/uapi/mtd/mtd-abi.h
-+++ linux-3.14.27/include/uapi/mtd/mtd-abi.h
-@@ -202,6 +202,7 @@ struct otp_info {
-  * without OOB, e.g., NOR flash.
-  */
- #define MEMWRITE              _IOWR('M', 24, struct mtd_write_req)
-+#define MTDREFRESH            _IO('M', 50)
- /*
-  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/adm5120/patches-3.14/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-3.14/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644 (file)
index 1fc4df2..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -50,6 +50,12 @@
- #define SST49LF008A           0x005a
- #define AT49BV6416            0x00d6
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -364,6 +370,41 @@ static struct cfi_fixup cfi_nopri_fixup_
-       { 0, 0, NULL }
- };
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 t;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              t = 2;  /* Bottom boot */
-+              break;
-+      case MX29LV160T:
-+      case MX29LV320T:
-+              t = 3;  /* Top boot */
-+              break;
-+      default:
-+              return;
-+      }
-+
-+      if (extp->TopBottom == t)
-+              /* boot location detected by the CFI layer is correct */
-+              return;
-+
-+      extp->TopBottom = t;
-+      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
- #ifdef AMD_BOOTLOC_BUG
-@@ -406,6 +447,9 @@ static struct cfi_fixup fixup_table[] =
-        */
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
-       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc },
-+#endif
-       { 0, 0, NULL }
- };
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -188,6 +188,14 @@ config MTD_CFI_AMDSTD
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Fix boot-block location for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have no/wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-3.14/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-3.14/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644 (file)
index 00148fa..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -115,6 +115,10 @@
- #define UPD29F064115  0x221C
- /* PMC */
-+#define PM39LV512     0x001B
-+#define PM39LV010     0x001C
-+#define PM39LV020     0x003D
-+#define PM39LV040     0x003E
- #define PM49FL002     0x006D
- #define PM49FL004     0x006E
- #define PM49FL008     0x006A
-@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
-                       ERASEINFO(0x02000,2),
-                       ERASEINFO(0x04000,1),
-               }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV512,
-+              .name           = "PMC Pm39LV512",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_64KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,16),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV010,
-+              .name           = "PMC Pm39LV010",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_128KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,32),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV020,
-+              .name           = "PMC Pm39LV020",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_256KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,64),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV040,
-+              .name           = "PMC Pm39LV040",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_512KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,128),
-+              }
-       }, {
-               .mfr_id         = CFI_MFR_PMC,
-               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches-3.14/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-3.14/103-mtd_trxsplit.patch
deleted file mode 100644 (file)
index 6266776..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -60,6 +60,10 @@ config MTD_ROOTFS_SPLIT
-       bool "Automatically split 'rootfs' partition for squashfs"
-       default y
-+config MTD_TRXSPLIT
-+      bool "Automatically find and split TRX partitions"
-+      default n
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       ---help---
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)  += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)       += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)       += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)     += mtd_blkdevs.o
diff --git a/target/linux/adm5120/patches-3.14/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-3.14/120-rb153_cf_driver.patch
deleted file mode 100644 (file)
index 9a30223..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -92,6 +92,7 @@ obj-$(CONFIG_PATA_PCMCIA)    += pata_pcmcia
- obj-$(CONFIG_PATA_PALMLD)     += pata_palmld.o
- obj-$(CONFIG_PATA_PLATFORM)   += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
-+obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
- obj-$(CONFIG_PATA_RB532)      += pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000)     += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -899,6 +899,15 @@ config PATA_QDI
-       help
-         Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-+config PATA_RB153_CF
-+      tristate "RouterBOARD 153 Compact Flash support"
-+      depends on ADM5120_MACH_RB_153
-+      help
-+        This option enables support for a Compact Flash connected on
-+        the RouterBOARD 153.
-+
-+        If unsure, say N.
-+
- config PATA_RB532
-       tristate "RouterBoard 532 PATA CompactFlash support"
-       depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-3.14/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-3.14/200-amba_pl010_hacks.patch
deleted file mode 100644 (file)
index ff47577..0000000
+++ /dev/null
@@ -1,354 +0,0 @@
---- a/drivers/tty/serial/amba-pl010.c
-+++ b/drivers/tty/serial/amba-pl010.c
-@@ -49,11 +49,9 @@
- #include <asm/io.h>
--#define UART_NR               8
--
- #define SERIAL_AMBA_MAJOR     204
- #define SERIAL_AMBA_MINOR     16
--#define SERIAL_AMBA_NR                UART_NR
-+#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
- #define AMBA_ISR_PASS_LIMIT   256
-@@ -79,9 +77,9 @@ static void pl010_stop_tx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_start_tx(struct uart_port *port)
-@@ -89,9 +87,9 @@ static void pl010_start_tx(struct uart_p
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_stop_rx(struct uart_port *port)
-@@ -99,9 +97,9 @@ static void pl010_stop_rx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_enable_ms(struct uart_port *port)
-@@ -109,18 +107,18 @@ static void pl010_enable_ms(struct uart_
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_MSIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_rx_chars(struct uart_amba_port *uap)
- {
-       unsigned int status, ch, flag, rsr, max_count = 256;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       while (UART_RX_DATA(status) && max_count--) {
--              ch = readb(uap->port.membase + UART01x_DR);
-+              ch = __raw_readl(uap->port.membase + UART01x_DR);
-               flag = TTY_NORMAL;
-               uap->port.icount.rx++;
-@@ -129,9 +127,9 @@ static void pl010_rx_chars(struct uart_a
-                * Note that the error handling code is
-                * out of the main execution path
-                */
--              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-               if (unlikely(rsr & UART01x_RSR_ANY)) {
--                      writel(0, uap->port.membase + UART01x_ECR);
-+                      __raw_writel(0, uap->port.membase + UART01x_ECR);
-                       if (rsr & UART01x_RSR_BE) {
-                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -161,7 +159,7 @@ static void pl010_rx_chars(struct uart_a
-               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-       ignore_char:
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-       }
-       spin_unlock(&uap->port.lock);
-       tty_flip_buffer_push(&uap->port.state->port);
-@@ -174,7 +172,7 @@ static void pl010_tx_chars(struct uart_a
-       int count;
-       if (uap->port.x_char) {
--              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-               uap->port.icount.tx++;
-               uap->port.x_char = 0;
-               return;
-@@ -186,7 +184,7 @@ static void pl010_tx_chars(struct uart_a
-       count = uap->port.fifosize >> 1;
-       do {
--              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               uap->port.icount.tx++;
-               if (uart_circ_empty(xmit))
-@@ -204,9 +202,9 @@ static void pl010_modem_status(struct ua
- {
-       unsigned int status, delta;
--      writel(0, uap->port.membase + UART010_ICR);
-+      __raw_writel(0, uap->port.membase + UART010_ICR);
--      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       delta = status ^ uap->old_status;
-       uap->old_status = status;
-@@ -234,7 +232,7 @@ static irqreturn_t pl010_int(int irq, vo
-       spin_lock(&uap->port.lock);
--      status = readb(uap->port.membase + UART010_IIR);
-+      status = __raw_readl(uap->port.membase + UART010_IIR);
-       if (status) {
-               do {
-                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -247,7 +245,7 @@ static irqreturn_t pl010_int(int irq, vo
-                       if (pass_counter-- == 0)
-                               break;
--                      status = readb(uap->port.membase + UART010_IIR);
-+                      status = __raw_readl(uap->port.membase + UART010_IIR);
-               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
-                                  UART010_IIR_TIS));
-               handled = 1;
-@@ -261,7 +259,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
--      unsigned int status = readb(uap->port.membase + UART01x_FR);
-+      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
-       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-@@ -271,7 +269,7 @@ static unsigned int pl010_get_mctrl(stru
-       unsigned int result = 0;
-       unsigned int status;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       if (status & UART01x_FR_DCD)
-               result |= TIOCM_CAR;
-       if (status & UART01x_FR_DSR)
-@@ -297,12 +295,12 @@ static void pl010_break_ctl(struct uart_
-       unsigned int lcr_h;
-       spin_lock_irqsave(&uap->port.lock, flags);
--      lcr_h = readb(uap->port.membase + UART010_LCRH);
-+      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-       if (break_state == -1)
-               lcr_h |= UART01x_LCRH_BRK;
-       else
-               lcr_h &= ~UART01x_LCRH_BRK;
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -330,12 +328,12 @@ static int pl010_startup(struct uart_por
-       /*
-        * initialise the old status of the modem signals
-        */
--      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       /*
-        * Finally, enable interrupts
-        */
--      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-              uap->port.membase + UART010_CR);
-       return 0;
-@@ -358,10 +356,10 @@ static void pl010_shutdown(struct uart_p
-       /*
-        * disable all interrupts, disable the port
-        */
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* disable break condition and fifos */
--      writel(readb(uap->port.membase + UART010_LCRH) &
-+      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
-               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
-              uap->port.membase + UART010_LCRH);
-@@ -383,7 +381,7 @@ pl010_set_termios(struct uart_port *port
-       /*
-        * Ask the core to calculate the divisor for us.
-        */
--      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       switch (termios->c_cflag & CSIZE) {
-@@ -446,25 +444,25 @@ pl010_set_termios(struct uart_port *port
-               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-       /* first, disable everything */
--      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-       if (UART_ENABLE_MS(port, termios->c_cflag))
-               old_cr |= UART010_CR_MSIE;
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* Set baud rate */
-       quot -= 1;
--      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-       /*
-        * ----------v----------v----------v----------v-----
-        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
-        * ----------^----------^----------^----------^-----
-        */
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -546,7 +544,7 @@ static struct uart_ops amba_pl010_pops =
-       .verify_port    = pl010_verify_port,
- };
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -556,10 +554,10 @@ static void pl010_console_putchar(struct
-       unsigned int status;
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (!UART_TX_READY(status));
--      writel(ch, uap->port.membase + UART01x_DR);
-+      __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- static void
-@@ -573,8 +571,8 @@ pl010_console_write(struct console *co,
-       /*
-        *      First save the CR then disable the interrupts
-        */
--      old_cr = readb(uap->port.membase + UART010_CR);
--      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-       uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -583,10 +581,10 @@ pl010_console_write(struct console *co,
-        *      and restore the TCR
-        */
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (status & UART01x_FR_BUSY);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       clk_disable(uap->clk);
- }
-@@ -595,9 +593,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
-                            int *parity, int *bits)
- {
--      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-               unsigned int lcr_h, quot;
--              lcr_h = readb(uap->port.membase + UART010_LCRH);
-+              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-               *parity = 'n';
-               if (lcr_h & UART01x_LCRH_PEN) {
-@@ -612,8 +610,8 @@ pl010_console_get_options(struct uart_am
-               else
-                       *bits = 8;
--              quot = readb(uap->port.membase + UART010_LCRL) |
--                     readb(uap->port.membase + UART010_LCRM) << 8;
-+              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
-               *baud = uap->port.uartclk / (16 * (quot + 1));
-       }
- }
-@@ -632,7 +630,7 @@ static int __init pl010_console_setup(st
-        * if so, search for the first available port that does have
-        * console support.
-        */
--      if (co->index >= UART_NR)
-+      if (co->index >= SERIAL_AMBA_NR)
-               co->index = 0;
-       uap = amba_ports[co->index];
-       if (!uap)
-@@ -674,7 +672,7 @@ static struct uart_driver amba_reg = {
-       .dev_name               = "ttyAM",
-       .major                  = SERIAL_AMBA_MAJOR,
-       .minor                  = SERIAL_AMBA_MINOR,
--      .nr                     = UART_NR,
-+      .nr                     = SERIAL_AMBA_NR,
-       .cons                   = AMBA_CONSOLE,
- };
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -18,10 +18,18 @@ config SERIAL_AMBA_PL010
-       help
-         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-         an Integrator/AP or Integrator/PP2 platform, or if you have a
--        Cirrus Logic EP93xx CPU, say Y or M here.
-+        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-         If unsure, say N.
-+config SERIAL_AMBA_PL010_NUMPORTS
-+      int "Maximum number of AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "8"
-+      ---help---
-+        Set this to the number of serial ports you want the AMBA PL010 driver
-+        to support.
-+
- config SERIAL_AMBA_PL010_CONSOLE
-       bool "Support for console on AMBA serial port"
-       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-3.14/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-3.14/203-gpio_leds_brightness.patch
deleted file mode 100644 (file)
index ac16e9b..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -56,13 +56,17 @@ static void gpio_led_set(struct led_clas
-               container_of(led_cdev, struct gpio_led_data, cdev);
-       int level;
--      if (value == LED_OFF)
--              level = 0;
--      else
--              level = 1;
--
--      if (led_dat->active_low)
--              level = !level;
-+      switch (value) {
-+      case LED_OFF:
-+              level = led_dat->active_low ? 1 : 0;
-+              break;
-+      case LED_FULL:
-+              level = led_dat->active_low ? 0 : 1;
-+              break;
-+      default:
-+              level = value;
-+              break;
-+      }
-       /* Setting GPIOs with I2C/etc requires a task context, and we don't
-        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-3.14/310-adm5120_wdt.patch b/target/linux/adm5120/patches-3.14/310-adm5120_wdt.patch
deleted file mode 100644 (file)
index 4f3c012..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1061,6 +1061,18 @@ config RC32434_WDT
-         To compile this driver as a module, choose M here: the
-         module will be called rc32434_wdt.
-+config ADM5120_WDT
-+      tristate "Infineon ADM5120 SoC hardware watchdog"
-+      depends on WATCHDOG && ADM5120
-+      help
-+        This is a driver for hardware watchdog integrated in Infineon
-+        ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+        it doesn't freeze, and if it does, it reboots your computer after a
-+        certain amount of time.
-+
-+        To compile this driver as a module, choose M here: the module will be
-+        called adm5120_wdt.
-+
- config INDYDOG
-       tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -127,6 +127,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
- obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
- obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
diff --git a/target/linux/adm5120/patches-3.8/001-adm5120.patch b/target/linux/adm5120/patches-3.8/001-adm5120.patch
deleted file mode 100644 (file)
index 28349eb..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -51,6 +51,24 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config ADM5120
-+      bool "Infineon/ADMtek ADM5120 SoC based machines"
-+      select BOOT_RAW
-+      select NO_EXCEPT_FILL
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select ARCH_REQUIRE_GPIOLIB
-+      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+      select MIPS_MACHINE
-+      select HAVE_CLK
-+
- config MIPS_ALCHEMY
-       bool "Alchemy processor based machines"
-       select 64BIT_PHYS_ADDR
-@@ -836,6 +854,7 @@ config NLM_XLP_BOARD
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -1,5 +1,6 @@
- # All platforms listed in alphabetic order
-+platforms += adm5120
- platforms += alchemy
- platforms += ar7
- platforms += ath79
diff --git a/target/linux/adm5120/patches-3.8/002-adm5120_flash.patch b/target/linux/adm5120/patches-3.8/002-adm5120_flash.patch
deleted file mode 100644 (file)
index 9daeab8..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -501,4 +501,8 @@ config MTD_LATCH_ADDR
-           If compiled as a module, it will be called latch-addr-flash.
-+config MTD_ADM5120
-+      tristate "Map driver for ADM5120 based boards"
-+      depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -37,6 +37,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)               += dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
-+obj-$(CONFIG_MTD_ADM5120)     += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o
- obj-$(CONFIG_MTD_UCLINUX)     += uclinux.o
diff --git a/target/linux/adm5120/patches-3.8/003-adm5120_switch.patch b/target/linux/adm5120/patches-3.8/003-adm5120_switch.patch
deleted file mode 100644 (file)
index 970d3d6..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -255,6 +255,10 @@ source "drivers/net/dsa/Kconfig"
- source "drivers/net/ethernet/Kconfig"
-+config ADM5120_ENET
-+      tristate "ADM5120 Ethernet switch support"
-+      depends on ADM5120
-+
- source "drivers/net/fddi/Kconfig"
- source "drivers/net/hippi/Kconfig"
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_CAN) += can/
- obj-$(CONFIG_ETRAX_ETHERNET) += cris/
- obj-$(CONFIG_NET_DSA) += dsa/
- obj-$(CONFIG_ETHERNET) += ethernet/
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_FDDI) += fddi/
- obj-$(CONFIG_HIPPI) += hippi/
- obj-$(CONFIG_HAMRADIO) += hamradio/
diff --git a/target/linux/adm5120/patches-3.8/005-adm5120_usb.patch b/target/linux/adm5120/patches-3.8/005-adm5120_usb.patch
deleted file mode 100644 (file)
index 44777a3..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_DWC3)               += dwc3/
- obj-$(CONFIG_USB_MON)         += mon/
- obj-$(CONFIG_PCI)             += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
- obj-$(CONFIG_USB_EHCI_HCD)    += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
- obj-$(CONFIG_USB_OHCI_HCD)    += host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -4,6 +4,10 @@
- comment "USB Host Controller Drivers"
-       depends on USB
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+      depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
-       tristate "Cypress C67x00 HCD support"
-       depends on USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_WHCI_HCD)   += whci/
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_EHCI_PCI)    += ehci-pci.o
- obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)   += ehci-platform.o
diff --git a/target/linux/adm5120/patches-3.8/007-adm5120_pci.patch b/target/linux/adm5120/patches-3.8/007-adm5120_pci.patch
deleted file mode 100644 (file)
index 2930884..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)     += ops-tx4927.o
- obj-$(CONFIG_BCM47XX)         += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
-                                       ops-bcm63xx.o
-+obj-$(CONFIG_ADM5120)         += pci-adm5120.o
- obj-$(CONFIG_MIPS_ALCHEMY)    += pci-alchemy.o
- obj-$(CONFIG_SOC_AR71XX)      += pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)      += pci-ar724x.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1807,6 +1807,9 @@
- #define PCI_VENDOR_ID_ESDGMBH         0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-3.8/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-3.8/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644 (file)
index 05c6db0..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -579,4 +579,12 @@ config LEDS_TRIGGER_USBDEV
-         This allows LEDs to be controlled by the presence/activity of
-         an USB device. If unsure, say N.
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+      tristate "LED ADM5120 Switch Port Status Trigger"
-+      depends on LEDS_TRIGGERS && ADM5120
-+      help
-+        This allows LEDs to be controlled by the port states of
-+        the ADM5120 built-in Ethernet Switch
-+        If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -68,3 +68,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) +=
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)     += ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV)     += ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-3.8/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-3.8/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644 (file)
index 46ec7b6..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -48,6 +48,12 @@
- #define SST49LF008A           0x005a
- #define AT49BV6416            0x00d6
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -358,6 +364,41 @@ static struct cfi_fixup cfi_nopri_fixup_
-       { 0, 0, NULL }
- };
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 t;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              t = 2;  /* Bottom boot */
-+              break;
-+      case MX29LV160T:
-+      case MX29LV320T:
-+              t = 3;  /* Top boot */
-+              break;
-+      default:
-+              return;
-+      }
-+
-+      if (extp->TopBottom == t)
-+              /* boot location detected by the CFI layer is correct */
-+              return;
-+
-+      extp->TopBottom = t;
-+      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
- #ifdef AMD_BOOTLOC_BUG
-@@ -400,6 +441,9 @@ static struct cfi_fixup fixup_table[] =
-        */
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
-       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc },
-+#endif
-       { 0, 0, NULL }
- };
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -189,6 +189,14 @@ config MTD_CFI_AMDSTD
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Fix boot-block location for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have no/wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-3.8/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-3.8/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644 (file)
index 00148fa..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -115,6 +115,10 @@
- #define UPD29F064115  0x221C
- /* PMC */
-+#define PM39LV512     0x001B
-+#define PM39LV010     0x001C
-+#define PM39LV020     0x003D
-+#define PM39LV040     0x003E
- #define PM49FL002     0x006D
- #define PM49FL004     0x006E
- #define PM49FL008     0x006A
-@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
-                       ERASEINFO(0x02000,2),
-                       ERASEINFO(0x04000,1),
-               }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV512,
-+              .name           = "PMC Pm39LV512",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_64KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,16),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV010,
-+              .name           = "PMC Pm39LV010",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_128KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,32),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV020,
-+              .name           = "PMC Pm39LV020",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_256KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,64),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV040,
-+              .name           = "PMC Pm39LV040",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_512KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,128),
-+              }
-       }, {
-               .mfr_id         = CFI_MFR_PMC,
-               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches-3.8/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-3.8/103-mtd_trxsplit.patch
deleted file mode 100644 (file)
index 08fecd8..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT
-       bool "Automatically split 'rootfs' partition for squashfs"
-       default y
-+config MTD_TRXSPLIT
-+      bool "Automatically find and split TRX partitions"
-+      default n
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       ---help---
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)  += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)       += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)       += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)                += mtdchar.o
diff --git a/target/linux/adm5120/patches-3.8/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-3.8/120-rb153_cf_driver.patch
deleted file mode 100644 (file)
index 3374554..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_PATA_PCMCIA)    += pata_pcmcia
- obj-$(CONFIG_PATA_PALMLD)     += pata_palmld.o
- obj-$(CONFIG_PATA_PLATFORM)   += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
-+obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
- obj-$(CONFIG_PATA_RB532)      += pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000)     += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -852,6 +852,15 @@ config PATA_QDI
-       help
-         Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-+config PATA_RB153_CF
-+      tristate "RouterBOARD 153 Compact Flash support"
-+      depends on ADM5120_MACH_RB_153
-+      help
-+        This option enables support for a Compact Flash connected on
-+        the RouterBOARD 153.
-+
-+        If unsure, say N.
-+
- config PATA_RB532
-       tristate "RouterBoard 532 PATA CompactFlash support"
-       depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-3.8/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-3.8/200-amba_pl010_hacks.patch
deleted file mode 100644 (file)
index 7f319d8..0000000
+++ /dev/null
@@ -1,355 +0,0 @@
---- a/drivers/tty/serial/amba-pl010.c
-+++ b/drivers/tty/serial/amba-pl010.c
-@@ -49,11 +49,9 @@
- #include <asm/io.h>
--#define UART_NR               8
--
- #define SERIAL_AMBA_MAJOR     204
- #define SERIAL_AMBA_MINOR     16
--#define SERIAL_AMBA_NR                UART_NR
-+#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
- #define AMBA_ISR_PASS_LIMIT   256
-@@ -79,9 +77,9 @@ static void pl010_stop_tx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_start_tx(struct uart_port *port)
-@@ -89,9 +87,9 @@ static void pl010_start_tx(struct uart_p
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_stop_rx(struct uart_port *port)
-@@ -99,9 +97,9 @@ static void pl010_stop_rx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_enable_ms(struct uart_port *port)
-@@ -109,9 +107,9 @@ static void pl010_enable_ms(struct uart_
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_MSIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -119,9 +117,9 @@ static void pl010_rx_chars(struct uart_a
-       struct tty_struct *tty = uap->port.state->port.tty;
-       unsigned int status, ch, flag, rsr, max_count = 256;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       while (UART_RX_DATA(status) && max_count--) {
--              ch = readb(uap->port.membase + UART01x_DR);
-+              ch = __raw_readl(uap->port.membase + UART01x_DR);
-               flag = TTY_NORMAL;
-               uap->port.icount.rx++;
-@@ -130,9 +128,9 @@ static void pl010_rx_chars(struct uart_a
-                * Note that the error handling code is
-                * out of the main execution path
-                */
--              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-               if (unlikely(rsr & UART01x_RSR_ANY)) {
--                      writel(0, uap->port.membase + UART01x_ECR);
-+                      __raw_writel(0, uap->port.membase + UART01x_ECR);
-                       if (rsr & UART01x_RSR_BE) {
-                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -162,7 +160,7 @@ static void pl010_rx_chars(struct uart_a
-               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-       ignore_char:
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-       }
-       spin_unlock(&uap->port.lock);
-       tty_flip_buffer_push(tty);
-@@ -175,7 +173,7 @@ static void pl010_tx_chars(struct uart_a
-       int count;
-       if (uap->port.x_char) {
--              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-               uap->port.icount.tx++;
-               uap->port.x_char = 0;
-               return;
-@@ -187,7 +185,7 @@ static void pl010_tx_chars(struct uart_a
-       count = uap->port.fifosize >> 1;
-       do {
--              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               uap->port.icount.tx++;
-               if (uart_circ_empty(xmit))
-@@ -205,9 +203,9 @@ static void pl010_modem_status(struct ua
- {
-       unsigned int status, delta;
--      writel(0, uap->port.membase + UART010_ICR);
-+      __raw_writel(0, uap->port.membase + UART010_ICR);
--      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       delta = status ^ uap->old_status;
-       uap->old_status = status;
-@@ -235,7 +233,7 @@ static irqreturn_t pl010_int(int irq, vo
-       spin_lock(&uap->port.lock);
--      status = readb(uap->port.membase + UART010_IIR);
-+      status = __raw_readl(uap->port.membase + UART010_IIR);
-       if (status) {
-               do {
-                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -248,7 +246,7 @@ static irqreturn_t pl010_int(int irq, vo
-                       if (pass_counter-- == 0)
-                               break;
--                      status = readb(uap->port.membase + UART010_IIR);
-+                      status = __raw_readl(uap->port.membase + UART010_IIR);
-               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
-                                  UART010_IIR_TIS));
-               handled = 1;
-@@ -262,7 +260,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
--      unsigned int status = readb(uap->port.membase + UART01x_FR);
-+      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
-       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-@@ -272,7 +270,7 @@ static unsigned int pl010_get_mctrl(stru
-       unsigned int result = 0;
-       unsigned int status;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       if (status & UART01x_FR_DCD)
-               result |= TIOCM_CAR;
-       if (status & UART01x_FR_DSR)
-@@ -298,12 +296,12 @@ static void pl010_break_ctl(struct uart_
-       unsigned int lcr_h;
-       spin_lock_irqsave(&uap->port.lock, flags);
--      lcr_h = readb(uap->port.membase + UART010_LCRH);
-+      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-       if (break_state == -1)
-               lcr_h |= UART01x_LCRH_BRK;
-       else
-               lcr_h &= ~UART01x_LCRH_BRK;
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -331,12 +329,12 @@ static int pl010_startup(struct uart_por
-       /*
-        * initialise the old status of the modem signals
-        */
--      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       /*
-        * Finally, enable interrupts
-        */
--      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-              uap->port.membase + UART010_CR);
-       return 0;
-@@ -359,10 +357,10 @@ static void pl010_shutdown(struct uart_p
-       /*
-        * disable all interrupts, disable the port
-        */
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* disable break condition and fifos */
--      writel(readb(uap->port.membase + UART010_LCRH) &
-+      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
-               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
-              uap->port.membase + UART010_LCRH);
-@@ -384,7 +382,7 @@ pl010_set_termios(struct uart_port *port
-       /*
-        * Ask the core to calculate the divisor for us.
-        */
--      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       switch (termios->c_cflag & CSIZE) {
-@@ -447,25 +445,25 @@ pl010_set_termios(struct uart_port *port
-               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-       /* first, disable everything */
--      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-       if (UART_ENABLE_MS(port, termios->c_cflag))
-               old_cr |= UART010_CR_MSIE;
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* Set baud rate */
-       quot -= 1;
--      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-       /*
-        * ----------v----------v----------v----------v-----
-        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
-        * ----------^----------^----------^----------^-----
-        */
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -547,7 +545,7 @@ static struct uart_ops amba_pl010_pops =
-       .verify_port    = pl010_verify_port,
- };
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -557,10 +555,10 @@ static void pl010_console_putchar(struct
-       unsigned int status;
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (!UART_TX_READY(status));
--      writel(ch, uap->port.membase + UART01x_DR);
-+      __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- static void
-@@ -574,8 +572,8 @@ pl010_console_write(struct console *co,
-       /*
-        *      First save the CR then disable the interrupts
-        */
--      old_cr = readb(uap->port.membase + UART010_CR);
--      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-       uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -584,10 +582,10 @@ pl010_console_write(struct console *co,
-        *      and restore the TCR
-        */
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (status & UART01x_FR_BUSY);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       clk_disable(uap->clk);
- }
-@@ -596,9 +594,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
-                            int *parity, int *bits)
- {
--      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-               unsigned int lcr_h, quot;
--              lcr_h = readb(uap->port.membase + UART010_LCRH);
-+              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-               *parity = 'n';
-               if (lcr_h & UART01x_LCRH_PEN) {
-@@ -613,8 +611,8 @@ pl010_console_get_options(struct uart_am
-               else
-                       *bits = 8;
--              quot = readb(uap->port.membase + UART010_LCRL) |
--                     readb(uap->port.membase + UART010_LCRM) << 8;
-+              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
-               *baud = uap->port.uartclk / (16 * (quot + 1));
-       }
- }
-@@ -633,7 +631,7 @@ static int __init pl010_console_setup(st
-        * if so, search for the first available port that does have
-        * console support.
-        */
--      if (co->index >= UART_NR)
-+      if (co->index >= SERIAL_AMBA_NR)
-               co->index = 0;
-       uap = amba_ports[co->index];
-       if (!uap)
-@@ -675,7 +673,7 @@ static struct uart_driver amba_reg = {
-       .dev_name               = "ttyAM",
-       .major                  = SERIAL_AMBA_MAJOR,
-       .minor                  = SERIAL_AMBA_MINOR,
--      .nr                     = UART_NR,
-+      .nr                     = SERIAL_AMBA_NR,
-       .cons                   = AMBA_CONSOLE,
- };
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -16,10 +16,18 @@ config SERIAL_AMBA_PL010
-       help
-         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-         an Integrator/AP or Integrator/PP2 platform, or if you have a
--        Cirrus Logic EP93xx CPU, say Y or M here.
-+        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-         If unsure, say N.
-+config SERIAL_AMBA_PL010_NUMPORTS
-+      int "Maximum number of AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "8"
-+      ---help---
-+        Set this to the number of serial ports you want the AMBA PL010 driver
-+        to support.
-+
- config SERIAL_AMBA_PL010_CONSOLE
-       bool "Support for console on AMBA serial port"
-       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-3.8/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-3.8/203-gpio_leds_brightness.patch
deleted file mode 100644 (file)
index ac16e9b..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -56,13 +56,17 @@ static void gpio_led_set(struct led_clas
-               container_of(led_cdev, struct gpio_led_data, cdev);
-       int level;
--      if (value == LED_OFF)
--              level = 0;
--      else
--              level = 1;
--
--      if (led_dat->active_low)
--              level = !level;
-+      switch (value) {
-+      case LED_OFF:
-+              level = led_dat->active_low ? 1 : 0;
-+              break;
-+      case LED_FULL:
-+              level = led_dat->active_low ? 0 : 1;
-+              break;
-+      default:
-+              level = value;
-+              break;
-+      }
-       /* Setting GPIOs with I2C/etc requires a task context, and we don't
-        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-3.8/310-adm5120_wdt.patch b/target/linux/adm5120/patches-3.8/310-adm5120_wdt.patch
deleted file mode 100644 (file)
index 56f345e..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -985,6 +985,18 @@ config RC32434_WDT
-         To compile this driver as a module, choose M here: the
-         module will be called rc32434_wdt.
-+config ADM5120_WDT
-+      tristate "Infineon ADM5120 SoC hardware watchdog"
-+      depends on WATCHDOG && ADM5120
-+      help
-+        This is a driver for hardware watchdog integrated in Infineon
-+        ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+        it doesn't freeze, and if it does, it reboots your computer after a
-+        certain amount of time.
-+
-+        To compile this driver as a module, choose M here: the module will be
-+        called adm5120_wdt.
-+
- config INDYDOG
-       tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -122,6 +122,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
- obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
- obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o