modules/niu/luasrc/model/cbi/niu/network/wlanwan.lua

   1 --[[
   2 LuCI - Lua Configuration Interface
   3
   4 Copyright 2009 Steven Barth <steven@midlink.org>
   5 Copyright 2009 Jo-Philipp Wich <xm@subsignal.org>
   6
   7 Licensed under the Apache License, Version 2.0 (the "License");
   8 you may not use this file except in compliance with the License.
   9 You may obtain a copy of the License at
  10
  11         http://www.apache.org/licenses/LICENSE-2.0
  12
  13 $Id$
  14 ]]--
  15
  16 local fs = require "nixio.fs"
  17 local uci = require "luci.model.uci"
  18 local nixio = require "nixio"
  19 local iwinfo = require "iwinfo"
  20
  21 local bridge
  22 local iface = "client"
  23 local net = "wan"
  24 if arg[1] == "bridge" then
  25         bridge = true
  26         iface = "bridge"
  27         net = "lan"
  28 end
  29
  30 local cursor = uci.inst
  31 local state = uci.inst_state
  32 cursor:unload("wireless")
  33 state:unload("wireless")
  34
  35 local has_ipv6 = fs.access("/proc/net/ipv6_route")
  36 local device = cursor:get("wireless", iface, "device")
  37 local hwtype = cursor:get("wireless", device, "type")
  38
  39
  40 -- Bring up interface and scan --
  41
  42 if not state:get("wireless", iface, "network") then
  43         local olduci = uci.cursor(nil, "")
  44         local oldcl = olduci:get_all("wireless", iface)
  45         olduci:unload("wireless")
  46
  47         local newuci = uci.cursor()
  48         local newcl = newuci:get_all("wireless", iface)
  49         newcl.network = net
  50
  51         local proc = nixio.fork()
  52         if proc == 0 then
  53                 newuci:delete("wireless", iface, "ssid")
  54                 newuci:commit("wireless")
  55                 nixio.exec("/sbin/wifi", "up", device)
  56                 os.exit(1)
  57         end
  58         nixio.wait(proc)
  59
  60         newuci:delete("wireless", iface)
  61         newuci:section("wireless", "wifi-iface", iface, oldcl)
  62         newuci:commit("wireless")
  63         newuci:tset("wireless", iface, newcl)
  64         newuci:save("wireless")
  65         newuci:unload("wireless")
  66
  67         state:unload("wireless")
  68 end
  69
  70 local ifname = state:get("wireless", iface, "ifname") or "wlan0dummy"
  71 local iwlib = iwinfo.type(ifname) and iwinfo[iwinfo.type(ifname)]
  72 local suggest = {}
  73 local encrdep = {
  74         none = {{["!default"] = 1}},
  75         wep = {{["!default"] = 1}},
  76         psk = {{["!default"] = 1}},
  77         psk2 = {{["!default"] = 1}},
  78         wpa = {{["!default"] = 1}},
  79         wpa2 = {{["!default"] = 1}}
  80 }
  81
  82 if iwlib then
  83         suggest = iwlib.scanlist(ifname)
  84 end
  85
  86
  87
  88 -- Form definition --
  89
  90 m2 = Map("wireless", translate("Configure WLAN-Adapter for Client Connection"),
  91 bridge and ("<strong>" .. translate([[It is absolutely necessary that the network you are joining
  92 supports and allows bridging (WDS) otherwise your connection will fail.]]) .. "</strong> " ..
  93 translate([[Note: You can use the access point wizard to configure your
  94 private access point to increase the range of the network you are connected to.]])) or "")
  95
  96 s = m2:section(NamedSection, iface, "wifi-iface", translate("Wireless Settings"))
  97 s.addremove = false
  98
  99 s:tab("general", translate("General Settings"))
 100 s:tab("expert", translate("Expert Settings"))
 101
 102 local ssid = s:taboption("general", Value, "ssid", translate("Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>)"))
 103 ssid.rmempty = false
 104
 105 for _, v in ipairs(suggest) do
 106         if v.mode == "Master" then
 107                 ssid:value(v.ssid)
 108
 109                 if not v.wep then
 110                         encrdep.wep[#encrdep.wep+1] = {ssid = v.ssid, ["!reverse"] = 1}
 111                 end
 112                 if v.wpa ~= 1 or (v.wpa == 1 and v.auth_suites[1] ~= "802.1x") then
 113                         encrdep.wpa[#encrdep.wpa+1] = {ssid = v.ssid, ["!reverse"] = 1}
 114                 end
 115                 if v.wpa ~= 1 or (v.wpa == 1 and v.auth_suites[1] ~= "PSK") then
 116                         encrdep.psk[#encrdep.psk+1] = {ssid = v.ssid, ["!reverse"] = 1}
 117                 end
 118                 if not v.wpa or v.wpa < 2 or (v.wpa >= 2 and v.auth_suites[1] ~= "802.1x") then
 119                         encrdep.wpa2[#encrdep.wpa2+1] = {ssid = v.ssid, ["!reverse"] = 1}
 120                 end
 121                 if not v.wpa or v.wpa < 2 or (v.wpa >= 2 and v.auth_suites[1] ~= "PSK") then
 122                         encrdep.psk2[#encrdep.psk2+1] = {ssid = v.ssid, ["!reverse"] = 1}
 123                 end
 124                 if v.wpa or v.wep then
 125                         encrdep.none[#encrdep.none+1] = {ssid = v.ssid, ["!reverse"] = 1}
 126                 end
 127         end
 128 end
 129
 130 mode = s:taboption("expert", ListValue, "mode", translate("Operating Mode"))
 131 mode.override_values = true
 132 mode:value("sta", translate("Client"))
 133
 134 encr = s:taboption("general", ListValue, "encryption", translate("Encryption"))
 135
 136
 137 if hwtype == "mac80211" then
 138         if not bridge then
 139                 mode:value("mesh", translate("Mesh (802.11s)"))
 140                 local meshid = s:taboption("expert", Value, "mesh_id", translate("Mesh ID"))
 141                 meshid:depends("mode", "mesh")
 142         end
 143
 144         local ps = s:taboption("expert", Flag, "powersave", translate("Enable Powersaving"))
 145         ps:depends("mode", "sta")
 146 elseif hwtype == "atheros" then
 147         s:taboption("expert", Flag, "bursting", translate("Allow Burst Transmissions"))
 148 end
 149
 150
 151
 152 -- Encryption --
 153
 154 encr.override_values = true
 155 encr.override_depends = true
 156 encr:value("none", "No Encryption", unpack(encrdep.none))
 157 encr:value("wep", "WEP", unpack(encrdep.wep))
 158
 159 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 160         local supplicant = fs.access("/usr/sbin/wpa_supplicant") or os.getenv("LUCI_SYSROOT")
 161         if supplicant then
 162                 encr:value("psk", "WPA", unpack(encrdep.psk))
 163                 encr:value("wpa", "WPA-EAP", unpack(encrdep.wpa))
 164                 encr:value("psk2", "WPA2", unpack(encrdep.psk2))
 165                 encr:value("wpa2", "WPA2-EAP (802.11i)", unpack(encrdep.wpa2))
 166         end
 167 elseif hwtype == "broadcom" then
 168         encr:value("psk", "WPA", unpack(encrdep.psk))
 169         encr:value("psk2", "WPA2", unpack(encrdep.psk2))
 170 end
 171
 172 key = s:taboption("general", Value, "key", translate("Password"))
 173 key:depends("encryption", "wep")
 174 key:depends("encryption", "psk")
 175 key:depends("encryption", "psk2")
 176 key.rmempty = true
 177 key.password = true
 178
 179 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 180         eaptype = s:taboption("general", ListValue, "eap_type", translate("EAP-Method"))
 181         eaptype:value("TLS")
 182         eaptype:value("TTLS")
 183         eaptype:value("PEAP")
 184         eaptype:depends({encryption="wpa"})
 185         eaptype:depends({encryption="wpa2"})
 186
 187         cacert = s:taboption("general", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
 188         cacert:depends({encryption="wpa"})
 189         cacert:depends({encryption="wpa2"})
 190
 191         privkey = s:taboption("general", FileUpload, "priv_key", translate("Path to Private Key"))
 192         privkey:depends({eap_type="TLS", encryption="wpa2"})
 193         privkey:depends({eap_type="TLS", encryption="wpa"})
 194
 195         privkeypwd = s:taboption("general", Value, "priv_key_pwd", translate("Password of Private Key"))
 196         privkeypwd:depends({eap_type="TLS", encryption="wpa2"})
 197         privkeypwd:depends({eap_type="TLS", encryption="wpa"})
 198
 199
 200         auth = s:taboption("general", Value, "auth", translate("Authentication"))
 201         auth:value("PAP")
 202         auth:value("CHAP")
 203         auth:value("MSCHAP")
 204         auth:value("MSCHAPV2")
 205         auth:depends({eap_type="PEAP", encryption="wpa2"})
 206         auth:depends({eap_type="PEAP", encryption="wpa"})
 207         auth:depends({eap_type="TTLS", encryption="wpa2"})
 208         auth:depends({eap_type="TTLS", encryption="wpa"})
 209
 210
 211         identity = s:taboption("general", Value, "identity", translate("Identity"))
 212         identity:depends({eap_type="PEAP", encryption="wpa2"})
 213         identity:depends({eap_type="PEAP", encryption="wpa"})
 214         identity:depends({eap_type="TTLS", encryption="wpa2"})
 215         identity:depends({eap_type="TTLS", encryption="wpa"})
 216
 217         password = s:taboption("general", Value, "password", translate("Password"))
 218         password:depends({eap_type="PEAP", encryption="wpa2"})
 219         password:depends({eap_type="PEAP", encryption="wpa"})
 220         password:depends({eap_type="TTLS", encryption="wpa2"})
 221         password:depends({eap_type="TTLS", encryption="wpa"})
 222 end
 223
 224
 225
 226 if not bridge then
 227
 228 m = Map("network")
 229
 230 s = m:section(NamedSection, net, "interface", translate("Address Settings"))
 231 s.addremove = false
 232
 233 s:tab("general", translate("General Settings"))
 234 s:tab("expert", translate("Expert Settings"))
 235
 236 p = s:taboption("general", ListValue, "proto", "Connection Type")
 237 p.override_scheme = true
 238 p.default = "dhcp"
 239 p:value("dhcp", "Automatic Configuration (DHCP)")
 240 p:value("static", "Static Configuration")
 241
 242
 243
 244 ipaddr = s:taboption("general", Value, "ipaddr", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"))
 245 ipaddr.rmempty = true
 246 ipaddr:depends("proto", "static")
 247
 248 nm = s:taboption("general", Value, "netmask", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
 249 nm.rmempty = true
 250 nm:depends("proto", "static")
 251 nm:value("255.255.255.0")
 252 nm:value("255.255.0.0")
 253 nm:value("255.0.0.0")
 254
 255 gw = s:taboption("general", Value, "gateway", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"))
 256 gw:depends("proto", "static")
 257 gw.rmempty = true
 258
 259 bcast = s:taboption("expert", Value, "bcast", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"))
 260 bcast:depends("proto", "static")
 261
 262 if has_ipv6 then
 263         ip6addr = s:taboption("expert", Value, "ip6addr", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
 264         ip6addr:depends("proto", "static")
 265
 266         ip6gw = s:taboption("expert", Value, "ip6gw", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"))
 267         ip6gw:depends("proto", "static")
 268 end
 269
 270 dns = s:taboption("expert", Value, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"))
 271 dns:depends("peerdns", "")
 272
 273 mtu = s:taboption("expert", Value, "mtu", "MTU")
 274 mtu.isinteger = true
 275
 276 mac = s:taboption("expert", Value, "macaddr", translate("<abbr title=\"Media Access Control\">MAC</abbr>-Address"))
 277
 278 return m2, m
 279
 280 else
 281
 282 return m2
 283
 284 end