"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-06-25 15:54+0200\n"
-"Last-Translator: ruwen <zhaoruwen@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2011-04-18 23:18+0800\n"
+"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
+"Language-Team: QQ Group:75543259\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
+"X-Generator: Translate Toolkit 1.1.1\n"
msgid "(%d minute window, %d second interval)"
-msgstr ""
+msgstr "(%d分钟绘图, 每%d秒刷新)"
msgid "(%s available)"
-msgstr ""
+msgstr "(%s 可用)"
msgid "(empty)"
-msgstr ""
+msgstr "空白"
msgid "(no interfaces attached)"
-msgstr ""
+msgstr "(无接口连接)"
msgid "-- Additional Field --"
-msgstr ""
+msgstr "-- 更多选项 --"
msgid "-- Please choose --"
msgstr "-- 请选择 --"
-#, fuzzy
msgid "-- custom --"
msgstr "-- 自定义 --"
msgid "1 Minute Load:"
-msgstr ""
+msgstr "1分钟负载:"
+
+msgid "5 Minute Load:"
+msgstr "5分钟负载:"
msgid "15 Minute Load:"
-msgstr ""
+msgstr "15分钟负载:"
msgid "40MHz 2nd channel above"
-msgstr ""
+msgstr "40MHz 2nd channel above"
msgid "40MHz 2nd channel below"
-msgstr ""
-
-msgid "5 Minute Load:"
-msgstr ""
+msgstr "40MHz 2nd channel below"
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
"<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/"
"prefix"
msgstr ""
+"<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-超网表示：地址/前"
+"缀"
+
+msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
+msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-端口"
msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
+msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 查询端口"
msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
+msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 服务器端口"
msgid ""
"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
"order of the resolvfile"
-msgstr ""
+msgstr "查询<abbr title=\"Domain Name System\">DNS</abbr>服务器上的解析文件"
msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-msgstr ""
+msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-服务器"
msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-msgstr "加密"
+msgstr "<abbr title=\"Encrypted\">加密</abbr>"
msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr ""
+msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-地址"
msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-msgstr ""
+msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-广播"
msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr ""
+msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-网关"
msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
+msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-子网掩码"
msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-msgstr ""
+msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址"
msgid ""
"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
"(CIDR)"
msgstr ""
+"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址或超网(CIDR)"
msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr ""
+msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-网关"
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr ""
+msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 配置"
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr ""
+msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 名称"
msgid ""
"<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection of "
"abbr>-Webframework and webinterface for embedded devices. <abbr title=\"Lua "
"Configuration Interface\">LuCI</abbr> is licensed under the Apache-License."
msgstr ""
+"<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一款嵌入式设备使用的"
+"免费Lua软件，包含web框架和web界面。<abbr title=\"Lua Configuration Interface"
+"\">LuCI</abbr>遵循Apache-License."
+
+msgid ""
+"<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, flexible, "
+"and user friendly graphical interface for configuring OpenWrt Kamikaze."
+msgstr ""
+"<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一个免费的，灵活的，"
+"可视化的用户界面，可用来配置OpenWrt。"
msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-地址"
msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-msgstr ""
+msgstr "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-密钥"
msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-msgstr "搜索无线网络(<abbr title=\"Wireless Local Area Network\">WLAN</abbr>)"
+msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-搜索"
msgid ""
"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
"Protocol\">DHCP</abbr> leases"
msgstr ""
+"<abbr title=\"maximal\">最大</abbr> <abbr title=\"Dynamic Host Configuration "
+"Protocol\">DHCP</abbr>分配数目"
msgid ""
"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
"Domain Name System\">EDNS0</abbr> paket size"
msgstr ""
+"<abbr title=\"maximal\">最大</abbr> <abbr title=\"Extension Mechanisms for "
+"Domain Name System\">EDNS0</abbr>报文大小"
msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
+msgstr "<abbr title=\"maximal\">最大</abbr> 并发查询"
msgid ""
"A lightweight HTTP/1.1 webserver written in C and Lua designed to serve LuCI"
-msgstr ""
+msgstr "一个用C语言和Lua实现的为LuCI提供服务的轻量级 HTTP/1.1 web服务器。"
msgid ""
"A small webserver which can be used to serve <abbr title=\"Lua Configuration "
"Interface\">LuCI</abbr>."
msgstr ""
+"一个用于<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的小型web服务"
+"器。"
+
+msgid "AP-Isolation"
+msgstr "AP隔离"
msgid "AR Support"
-msgstr ""
+msgstr "AR 支持"
msgid "ATM Bridges"
-msgstr ""
+msgstr "ATM 桥接"
msgid "ATM Settings"
-msgstr ""
+msgstr "ATM 设置"
msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
+msgstr "ATM 虚拟通道标识"
msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
+msgstr "ATM 虚拟路径标识"
msgid ""
"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
"Linux network interfaces which can be used in conjunction with DHCP or PPP "
"to dial into the provider network."
msgstr ""
+"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
+"Linux network interfaces which can be used in conjunction with DHCP or PPP "
+"to dial into the provider network."
msgid "ATM device number"
-msgstr ""
+msgstr "ATM 设备号码"
msgid "About"
msgstr "关于"
msgid "Access Point"
-msgstr ""
+msgstr "接入点"
msgid "Access point (APN)"
-msgstr ""
+msgstr "接入点(APN)"
msgid "Action"
-msgstr ""
+msgstr "动作"
msgid "Actions"
msgstr "动作"
msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
+msgstr "活动的<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-链路"
msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
+msgstr "活动的<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-链路"
msgid "Active Connections"
-msgstr ""
+msgstr "活动连接"
+
+msgid "Active IP Connections"
+msgstr "活动IP连接"
+
+msgid "Active IPv4-Routes"
+msgstr "活动的IPv4路由表"
msgid "Active Leases"
-msgstr ""
+msgstr "活动的客户端"
msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
+msgstr "点对点(Ad-Hoc)"
msgid "Add"
msgstr "添加"
+msgid "adds domain names to hostentries in the resolv file"
+msgstr "添加域名条目到主机解析文件"
+
msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
+msgstr "添加本地域名后缀名称到hosts文件"
msgid "Add new interface..."
-msgstr ""
+msgstr "添加新接口"
+
+msgid "Add the Wifi network to physical network"
+msgstr "添加无线网络到物理网络"
msgid "Additional Hosts files"
-msgstr ""
+msgstr "额外的Hosts文件"
msgid "Additional pppd options"
-msgstr ""
+msgstr "更多pppd选项"
msgid "Address"
-msgstr ""
+msgstr "地址"
msgid "Addresses"
msgstr "地址"
msgid "Admin Password"
-msgstr "管ç\90\86å\91\98å¯\86ç \81"
+msgstr "管理密码"
msgid "Administration"
-msgstr "管理员"
+msgstr "管理界面"
-#, fuzzy
msgid "Advanced Settings"
-msgstr "基本设置"
+msgstr "高级设置"
msgid "Advertise IPv6 on network"
-msgstr ""
+msgstr "在网络上通告IPv6"
msgid "Advertised network ID"
-msgstr ""
+msgstr "通告网络ID"
msgid "Alert"
-msgstr ""
+msgstr "警告"
msgid "Alias"
msgstr "别名"
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
+msgstr "允许 <abbr title=\"Secure Shell\">SSH</abbr> 密码验证"
msgid "Allow all except listed"
-msgstr ""
+msgstr "允许列表外的"
msgid "Allow listed only"
-msgstr ""
+msgstr "仅允许列表内的"
msgid "Allow localhost"
-msgstr ""
+msgstr "允许本地主机"
msgid ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
+msgstr "允许上行响应范围 127.0.0.0/8，例如：RBL服务"
msgid "Allowed range is 1 to FFFF"
-msgstr ""
+msgstr "允许范围 1 ~ FFFF"
msgid ""
"Also kernel or service logfiles can be viewed here to get an overview over "
"their current state."
-msgstr ""
+msgstr "这里显示了系统日志，可以了解系统当前的运行状态。"
msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
+msgstr "如果你放弃选中那将创建一个额外的网络"
+
+msgid "And now have fun with your router!"
+msgstr "现在开始体验路由给你带来的乐趣吧!"
msgid "Antenna 1"
-msgstr ""
+msgstr "天线 1"
msgid "Antenna 2"
-msgstr ""
+msgstr "天线 2"
msgid "Apply"
msgstr "应用"
msgid "Applying changes"
msgstr "应用更改"
+msgid ""
+"As we always want to improve this interface we are looking forward to your "
+"feedback and suggestions."
+msgstr "我们一直在努力提升界面效果，并期待着您的意见与建议。"
+
msgid "Associated Stations"
-msgstr ""
+msgstr "已连接站点"
+
+msgid "Attach to existing network"
+msgstr "连接现有网络"
msgid "Authentication"
-msgstr ""
+msgstr "认证"
msgid "Authentication Realm"
-msgstr ""
+msgstr "验证范围"
msgid "Authoritative"
-msgstr ""
+msgstr "授权"
msgid "Authorization Required"
-msgstr "认证请求"
+msgstr "需要授权"
msgid "Automatic Disconnect"
-msgstr ""
+msgstr "自动断开"
msgid "Available"
-msgstr ""
+msgstr "可用"
msgid "Available packages"
-msgstr ""
+msgstr "可用的软件包"
msgid "Average:"
-msgstr ""
+msgstr "平均:"
msgid "BSSID"
-msgstr ""
+msgstr "BSSID"
msgid "Back"
-msgstr ""
+msgstr "返回"
msgid "Back to Overview"
-msgstr ""
-
-msgid "Back to overview"
-msgstr ""
+msgstr "返回至总览"
msgid "Back to scan results"
-msgstr ""
+msgstr "返回至扫描结果"
msgid "Background Scan"
-msgstr ""
+msgstr "后台扫描"
msgid "Backup / Restore"
-msgstr "备份/另存为"
+msgstr "备份/恢复"
msgid "Backup Archive"
-msgstr ""
+msgstr "已备份文档"
msgid "Bad address specified!"
-msgstr ""
+msgstr "指定了错误的地址！"
msgid "Bit Rate"
-msgstr ""
+msgstr "比特率"
msgid "Bitrate"
-msgstr ""
+msgstr "比特率"
msgid "Bridge"
-msgstr "ç½\91æ¡¥"
+msgstr "æ¡¥æ\8e¥"
msgid "Bridge Port"
-msgstr "桥接口"
+msgstr "桥接端口"
msgid "Bridge interfaces"
-msgstr ""
+msgstr "桥接接口"
msgid "Bridge unit number"
-msgstr ""
+msgstr "桥接号码"
msgid "Buttons"
-msgstr ""
+msgstr "按键"
msgid "CPU"
-msgstr ""
+msgstr "CPU"
msgid "CPU usage (%)"
-msgstr ""
+msgstr "CPU 使用率(%)"
msgid "Cancel"
msgstr "取消"
msgid "Chain"
-msgstr "Chain"
+msgstr "链表"
msgid ""
"Change the password of the system administrator (User <code>root</code>)"
-msgstr "ä¿®æ\94¹ç³»ç»\9f管ç\90\86å\91\98å¯\86ç \81(ç\94¨æ\88·<code>root</code>)"
+msgstr "ä¿®æ\94¹ç®¡ç\90\86å\91\98å¯\86ç \81"
msgid "Changes"
-msgstr "更改"
+msgstr "修改数"
msgid "Changes applied."
-msgstr ""
+msgstr "已应用的修改"
msgid "Channel"
-msgstr "通道"
+msgstr "信道"
msgid "Check"
-msgstr ""
+msgstr "检查"
msgid "Checksum"
-msgstr ""
+msgstr "校验"
msgid ""
"Choose the firewall zone you want to assign to this interface. Select "
"fill out the <em>create</em> field to define a new zone and attach the "
"interface to it."
msgstr ""
+"请选择指派到这个接口的防火墙区域。选择<em>未指定</em>移除接口，或者<em>添加</"
+"em>新建防火墙区域。"
msgid ""
"Choose the network you want to attach to this wireless interface. Select "
"<em>unspecified</em> to not attach any network or fill out the <em>create</"
"em> field to define a new network."
msgstr ""
+"请选择要连接到此无线接口的网络。选择<em>未指定</em>不连接到任何网络，或者<em>"
+"添加</em>来定义一个新网络。"
+
+msgid "Clamp Segment Size"
+msgstr "固定段大小"
msgid "Client"
msgstr "客户端"
msgid "Client + WDS"
-msgstr "Client + WDS"
+msgstr "客户端+WDS"
msgid "Collecting data..."
-msgstr ""
+msgstr "收集信息中..."
msgid "Command"
-msgstr ""
+msgstr "命令"
msgid "Common Configuration"
-msgstr ""
+msgstr "一般设置"
msgid "Compression"
-msgstr ""
+msgstr "压缩"
msgid "Configuration"
msgstr "配置"
msgid "Configuration / Apply"
-msgstr ""
+msgstr "设置/应用"
msgid "Configuration / Changes"
-msgstr ""
+msgstr "设置/更改"
msgid "Configuration / Revert"
-msgstr ""
+msgstr "设置/恢复"
-msgid "Configuration applied."
-msgstr ""
+msgid "Configuration applied"
+msgstr "设置已应用"
msgid "Configuration file"
msgstr "配置文件"
msgid ""
"Configure the local DNS server to use the name servers adverticed by the PPP "
"peer"
-msgstr ""
+msgstr "本地DNS服务器使用PPP对等连接提供的建议"
msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
+msgstr "对于block-extroot则设置挂载为overlay存储 "
msgid "Confirmation"
-msgstr ""
+msgstr "确认密码"
+
+msgid "Connected"
+msgstr "已连接"
msgid "Connect script"
-msgstr ""
+msgstr "连接脚本"
msgid "Connection Limit"
-msgstr ""
+msgstr "连接受限"
msgid "Connection timeout"
-msgstr ""
+msgstr "连接超时"
msgid "Contributing Developers"
-msgstr "开发贡献者"
+msgstr "特别致谢"
msgid "Country"
-msgstr ""
+msgstr "国家"
msgid "Country Code"
-msgstr "国家编号"
+msgstr "国家代码"
msgid "Cover the following interface"
-msgstr ""
+msgstr "包括以下接口"
msgid "Cover the following interfaces"
-msgstr ""
+msgstr "包括以下接口"
msgid "Create / Assign firewall-zone"
-msgstr ""
+msgstr "创建/指派 防火墙区域"
msgid "Create Interface"
-msgstr ""
+msgstr "创建接口"
+
+msgid "Create Or Attach Network"
+msgstr "创建/连接 网络"
msgid "Create Network"
-msgstr ""
+msgstr "创建网络"
msgid "Create a bridge over multiple interfaces"
-msgstr ""
+msgstr "在多个接口间创建网桥"
msgid "Create backup"
msgstr "创建备份"
msgid "Critical"
-msgstr ""
+msgstr "临界"
msgid "Cron Log Level"
-msgstr ""
+msgstr "Cron日志级别"
msgid "Custom Files"
-msgstr ""
+msgstr "自定义文件"
msgid "Custom Interface"
-msgstr ""
+msgstr "自定义接口"
msgid "Custom files"
-msgstr ""
+msgstr "自定义文件"
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
-msgstr ""
+msgstr "自定义<abbr title=\"Light Emitting Diode\">LED</abbr>行为。"
msgid "DHCP Leases"
-msgstr ""
+msgstr "DHCP 分配"
msgid "DHCP Server"
-msgstr ""
+msgstr "DHCP 服务器"
msgid "DHCP assigned"
-msgstr "DHCP已分配节点"
+msgstr "DHCP有效分配"
msgid "DHCP-Options"
-msgstr ""
+msgstr "DHCP-附加选项"
msgid "DNS forwardings"
-msgstr ""
+msgstr "DNS 转发"
msgid "Debug"
-msgstr ""
+msgstr "调试"
msgid "Default state"
-msgstr ""
+msgstr "默认状态"
msgid "Define a name for this network."
-msgstr ""
+msgstr "定义此网络的名称"
msgid ""
"Define additional DHCP options, for example "
"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
"servers to clients."
msgstr ""
+"定义DHCP的附加选项，例如设定\"<code>6,192.168.2.1,192.168.2.2</code>\"表示通"
+"告不同的DNS服务器给客户端。"
msgid "Delete"
msgstr "删除"
msgid "Delete this interface"
-msgstr ""
+msgstr "删除这个接口"
msgid "Delete this network"
-msgstr ""
+msgstr "删除这个网络"
msgid "Description"
msgstr "描述"
msgstr "主题"
msgid "Destination"
-msgstr "Destination"
+msgstr "目的地址"
msgid "Detected Files"
-msgstr ""
+msgstr "查询到的文件"
msgid "Detected files"
-msgstr ""
+msgstr "查询到的文件"
msgid "Device"
msgstr "设备"
+msgid "Devices"
+msgstr "设备"
+
msgid "Device Configuration"
-msgstr ""
+msgstr "设备配置"
msgid "Diagnostics"
-msgstr ""
+msgstr "诊断"
msgid ""
"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
"this interface."
msgstr ""
+"禁用本接口的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgid "Disable HW-Beacon timer"
-msgstr ""
+msgstr "禁用硬件Beacon时钟"
msgid "Discard upstream RFC1918 responses"
-msgstr ""
+msgstr "丢弃本地地址的上行响应数据(RFC1918)"
msgid "Disconnect script"
-msgstr ""
+msgstr "断开脚本"
msgid "Distance Optimization"
-msgstr ""
+msgstr "距离优化"
msgid "Distance to farthest network member in meters."
-msgstr ""
+msgstr "为远距离客户提供优化"
msgid "Diversity"
-msgstr ""
+msgstr "分集"
msgid ""
"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
"firewalls"
msgstr ""
+"Dnsmasq是一个结合了<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr>服务器和<abbr title=\"Domain Name System\">DNS</abbr>转发器的小工具，服"
+"务于<abbr title=\"Network Address Translation\">NAT</abbr>防火墙。"
msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
+msgstr "不缓存错误的回复，例如不存在的域名"
msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
+msgstr "不转发公共域名服务器无法回答的请求"
msgid "Do not forward reverse lookups for local networks"
-msgstr ""
+msgstr "不查找本地网络"
msgid "Do not send probe responses"
-msgstr ""
+msgstr "不发送探测回应"
msgid "Document root"
-msgstr ""
+msgstr "根文档"
msgid "Domain required"
-msgstr ""
+msgstr "必选域名"
msgid "Domain whitelist"
-msgstr ""
+msgstr "域名白名单"
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgstr ""
+"不转发无<abbr title=\"Domain Name System\">DNS</abbr>名称的<abbr title="
+"\"Domain Name System\">DNS</abbr>请求"
msgid "Download and install package"
msgstr "下载并安装软件包"
"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
msgstr ""
+"Dropbear提供了集成的<abbr title=\"Secure Copy\">SCP</abbr>服务器和基于<abbr "
+"title=\"Secure Shell\">SSH</abbr>的shell访问。"
msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
+msgstr "动态<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgid ""
"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
"having static leases will be served."
msgstr ""
+"动态地分配DHCP地址给客户端。如果禁用，则只能为静态租用表中的客户端提供服务。"
msgid "EAP-Method"
-msgstr ""
+msgstr "EAP-Method"
msgid "Edit"
-msgstr "编辑"
+msgstr "修改"
msgid "Edit package lists and installation targets"
-msgstr ""
+msgstr "编辑软件包的同步源和安装地址"
msgid "Edit this interface"
-msgstr ""
+msgstr "修改此接口"
msgid "Edit this network"
-msgstr ""
+msgstr "修改此网络"
msgid "Emergency"
-msgstr ""
+msgstr "紧急"
+
+msgid "enable"
+msgstr "启用"
msgid "Enable 4K VLANs"
-msgstr ""
+msgstr "开启 4K VLANs"
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr ""
+msgstr "开启 <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgid "Enable IPv6 on PPP link"
-msgstr ""
+msgstr "在PPP链路上启用IPv6"
msgid "Enable Keep-Alive"
-msgstr ""
+msgstr "开启保持活动 Keep-Alive"
msgid "Enable TFTP server"
-msgstr ""
+msgstr "开启TFTP服务器"
msgid "Enable VLAN functionality"
-msgstr ""
+msgstr "开启VLAN支持"
msgid "Enable device"
-msgstr ""
+msgstr "开启设备"
msgid "Enable this mount"
-msgstr ""
+msgstr "开启挂载mount"
msgid "Enable this swap"
-msgstr ""
+msgstr "开启挂载swap"
msgid "Enable this switch"
-msgstr ""
+msgstr "开启交换机"
msgid "Enabled"
-msgstr ""
+msgstr "已启用"
msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
+msgstr "在此桥接上启用生成协议树"
msgid "Encapsulation mode"
-msgstr ""
+msgstr "封包模式"
msgid "Encryption"
-msgstr ""
+msgstr "加密"
msgid "Error"
msgstr "错误"
+msgid "Errors"
+msgstr "错误"
+
+msgid "Essentials"
+msgstr "概要"
+
msgid "Ethernet Adapter"
-msgstr "以太接口卡"
+msgstr "以太网适配器"
msgid "Ethernet Bridge"
-msgstr "以太桥"
+msgstr "以太网桥"
msgid "Ethernet Switch"
-msgstr "以太交换机"
+msgstr "以太网交换机"
msgid "Expand hosts"
-msgstr ""
+msgstr "扩展主机"
+
+msgid "Expires"
+msgstr "到期时间"
msgid ""
"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
+msgstr "地址租约过期时间，最小为2分钟(<code>2m</code>)。"
msgid "External system log server"
-msgstr ""
+msgstr "外部系统日志服务器"
msgid "External system log server port"
-msgstr ""
+msgstr "外部系统日志服务器端口"
msgid "Fast Frames"
-msgstr ""
+msgstr "快速帧"
msgid "Filename of the boot image advertised to clients"
-msgstr ""
+msgstr "向客户端通告启动镜像文件名"
msgid "Files to be kept when flashing a new firmware"
-msgstr "在升级新的firmware时要保留的文件"
+msgstr "更新固件时被保存的文件"
msgid "Filesystem"
msgstr "文件系统"
msgstr "过滤器"
msgid "Filter private"
-msgstr ""
+msgstr "过滤本地包"
msgid "Filter useless"
-msgstr ""
+msgstr "过滤无用包"
msgid "Find and join network"
-msgstr ""
+msgstr "查找和加入网络"
msgid "Find package"
-msgstr "æ\90\9cç´¢æ\95°æ\8d®包"
+msgstr "æ\9f¥æ\89¾è½¯ä»¶包"
msgid "Finish"
-msgstr ""
+msgstr "完成"
msgid "Firewall"
msgstr "防火墙"
-#, fuzzy
msgid "Firewall Settings"
-msgstr "防火墙状态"
+msgstr "防火墙设置"
msgid "Firewall Status"
msgstr "防火墙状态"
msgid "Firmware image"
-msgstr ""
+msgstr "固件文件"
+
+msgid "Firmware Version"
+msgstr "固件版本"
msgid "Fixed source port for outbound DNS queries"
-msgstr ""
+msgstr "修复出站的DNS查询源端口"
+
+msgid ""
+"Fixes problems with unreachable websites, submitting forms or other "
+"unexpected behaviour for some ISPs."
+msgstr "修复某些ISP的不可达网站或其他未知错误"
msgid "Flags"
msgstr "标志"
msgid "Flash Firmware"
+msgstr "升级固件"
+
+msgid ""
+"filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
+"Windows-systems"
msgstr ""
+"过滤无用的<abbr title=\"Domain Name System\">DNS</abbr>Windows-systems查询"
msgid "Force"
-msgstr ""
+msgstr "强制"
msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
+msgstr "在探测到有其他DHCP服务器的情况下也强制启动DHCP。"
msgid "Forwarding mode"
-msgstr ""
+msgstr "转发模式"
msgid "Fragmentation Threshold"
-msgstr ""
+msgstr "分片阈值(依据MTU)"
msgid "Frame Bursting"
-msgstr ""
+msgstr "桢突发"
msgid "Free space"
-msgstr ""
+msgstr "空闲空间"
msgid "Frequency Hopping"
-msgstr ""
+msgstr "跳频"
+
+msgid "Gateway"
+msgstr "网关"
msgid "General"
-msgstr ""
+msgstr "基本信息"
msgid "General Settings"
-msgstr ""
+msgstr "基本设置"
msgid "General Setup"
-msgstr ""
+msgstr "基本设置"
msgid "Go to relevant configuration page"
-msgstr ""
+msgstr "转到相关配置页"
msgid "HE.net Tunnel ID"
-msgstr ""
+msgstr "HE.net隧道ID"
msgid "HT capabilities"
-msgstr ""
+msgstr "HT 功能"
msgid "HT mode"
-msgstr ""
+msgstr "HT 模式"
msgid "Handler"
-msgstr ""
+msgstr "处理程序"
msgid "Hang Up"
-msgstr ""
+msgstr "挂起"
+
+msgid "Hardware Address"
+msgstr "硬件地址"
+
+msgid "Hello!"
+msgstr "Hello!"
msgid ""
"Here you can backup and restore your router configuration and - if possible "
"- reset the router to the default settings."
-msgstr ""
+msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
+
+msgid "Here you can configure installed wifi devices."
+msgstr "这里可以配置已安装的无线设备。"
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
-msgstr "在这里可以设置设备的初始配置,如主机名或者时区"
+msgstr "这里可以配置路由器的部分基本信息，比如主机名和时区。"
msgid ""
"Here you can customize the settings and the functionality of <abbr title="
"\"Lua Configuration Interface\">LuCI</abbr>."
msgstr ""
-"在这里你可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的信"
-"息设置和功能配置"
+"这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组件和"
+"功能。"
msgid ""
"Here you can find information about the current system status like <abbr "
"title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory usage "
"or network interface data."
msgstr ""
-"
你可以在这里查看当前的系统信息,例如<abbr title=\"Central Processing Unit"
-"\">CPU</abbr>频率、内存使用率和网络接口信息等。"
+"
这里可以查看系统当前的状态信息，比如<abbr title=\"Central Processing Unit"
+"\">CPU</abbr>频率、内存使用率或网络链接数据。"
msgid ""
"Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys (one "
"per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
"authentication."
msgstr ""
+"这里可以粘贴<abbr title=\"Secure Shell\">SSH</abbr>公用密钥以用于<abbr title="
+"\"Secure Shell\">SSH</abbr>公共密钥认证(每行一个密钥)。"
msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
+msgstr "隐藏<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgid "Host entries"
-msgstr ""
+msgstr "主机记录"
msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
+msgstr "主机-<abbr title=\"Internet Protocol Address\">IP</abbr>或网络"
msgid "Hostname"
msgstr "主机名"
msgid "Hostnames"
-msgstr ""
+msgstr "主机名"
msgid "ID"
msgstr "ID"
msgid "IP Configuration"
-msgstr "IP配置"
+msgstr "IP设置"
msgid "IP address"
-msgstr ""
+msgstr "IP地址"
msgid "IP-Aliases"
-msgstr ""
+msgstr "IP别名"
msgid "IPv4"
-msgstr ""
+msgstr "IPv4"
msgid "IPv4 Firewall"
-msgstr ""
+msgstr "IPv4 防火墙"
msgid "IPv4-Address"
-msgstr ""
+msgstr "IPv4-地址"
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6 Firewall"
-msgstr ""
+msgstr "IPv6 防火墙"
msgid "IPv6 Setup"
-msgstr ""
+msgstr "IPv6设置"
msgid "Identity"
-msgstr ""
+msgstr "鉴权"
msgid ""
"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
+msgstr "如果设备指定了UUID，则用其取代既定的设备节点来挂载设备"
msgid ""
"If specified, mount the device by the partition label instead of a fixed "
"device node"
-msgstr ""
+msgstr "如果设备指定了卷标，则用其取代既定的设备节点来挂载设备"
msgid ""
"If your physical memory is insufficient unused data can be temporarily "
"slow process as the swap-device cannot be accessed with the high datarates "
"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
msgstr ""
+"如果物理内存不足，暂时不用的数据可以交换到swap设备暂存，从而得到更多的可用内"
+"存。应了解的是，访问swap设备比访问<abbr title=\"Random Access Memory\">RAM</"
+"abbr>要慢不少。"
-msgid "Ignore Hosts files"
+msgid ""
+"If the interface is attached to an existing network it will be <em>bridged</"
+"em> to the existing interfaces and is covered by the firewall zone of the "
+"choosen network.<br />Uncheck the attach option to define a new standalone "
+"network for this interface."
msgstr ""
+"如果连接在已有网络，那么它会被<em>桥接</em>到现有接口，并且被所选的防火墙区域"
+"覆盖。取消附加选项可以重定义此接口为新的独立网络。"
+
+msgid "Ignore Hosts files"
+msgstr "忽略Hosts文件"
msgid "Ignore interface"
-msgstr ""
+msgstr "忽略接口"
msgid "Ignore resolve file"
-msgstr ""
+msgstr "忽略解析文件"
+
+msgid "Ignore <code>/etc/hosts</code>"
+msgstr "忽略 <code>/etc/hosts</code>"
msgid "In"
-msgstr ""
+msgstr "入口"
msgid "Inbound:"
-msgstr ""
+msgstr "入站："
+
+msgid "Independent (Ad-Hoc)"
+msgstr "独立(点对点Ad-Hoc)"
msgid "Info"
-msgstr ""
+msgstr "信息"
msgid "Install"
msgstr "安装"
msgid "Installation targets"
-msgstr ""
+msgstr "安装位置"
msgid "Installed packages"
-msgstr ""
+msgstr "已安装软件包"
msgid "Interface"
msgstr "接口"
msgid "Interface Configuration"
-msgstr ""
+msgstr "接口配置"
msgid "Interface Overview"
-msgstr ""
+msgstr "接口总览"
msgid "Interface Status"
msgstr "接口状态"
msgid "Interface is reconnecting..."
-msgstr ""
+msgstr "重新连接中..."
msgid "Interface is shutting down..."
-msgstr ""
+msgstr "正在关闭..."
msgid "Interface not present or not connected yet."
-msgstr ""
+msgstr "接口尚未开启或连接"
msgid "Interface reconnected"
-msgstr ""
+msgstr "接口已重新连接"
msgid "Interface shut down"
-msgstr ""
+msgstr "断开接口"
msgid "Interfaces"
msgstr "接口"
+msgid "Internet Connection"
+msgstr "网络连接"
+
msgid "Invalid"
-msgstr ""
+msgstr "输入错误"
msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
+msgstr "非法的VLAN号！只允许从 %d 到 %d 。"
msgid "Invalid username and/or password! Please try again."
-msgstr "无效的用户名和(或)密码！请重新输入"
+msgstr "用户名或密码错误，请重试。"
msgid ""
"It appears that you try to flash an image that does not fit into the flash "
"memory, please verify the image file!"
-msgstr ""
+msgstr "试图刷写一个会变砖的固件，路由器鸭梨很大，请验证！"
+
+msgid "IPv4 WAN Status"
+msgstr "IPv4 WAN 状态"
msgid "Java Script required!"
-msgstr ""
+msgstr "需要 Java Script！"
+
+msgid "Join (Client)"
+msgstr "加入(客户端)"
-#, fuzzy
msgid "Join Network"
-msgstr "网络"
+msgstr "加入网络"
msgid "Join Network: Settings"
-msgstr ""
+msgstr "加入网络:设置"
msgid "Join Network: Wireless Scan"
-msgstr ""
+msgstr "加入网络:搜索无线"
msgid "KB"
-msgstr ""
+msgstr "KB"
msgid "Keep configuration files"
-msgstr ""
+msgstr "保留配置"
msgid "Keep-Alive"
-msgstr ""
+msgstr "保持活动Keep-Alive"
msgid "Kernel"
-msgstr ""
+msgstr "内核"
msgid "Kernel Log"
msgstr "内核日志"
+msgid "Kernel Version"
+msgstr "内核版本"
+
msgid "Key"
-msgstr "密钥"
+msgstr "密码"
msgid "Key #%d"
-msgstr ""
+msgstr "密码 #%d"
msgid "Kill"
-msgstr ""
+msgstr "强制清理"
msgid "LLC"
-msgstr ""
+msgstr "逻辑链路控制LLC"
msgid "Label"
-msgstr ""
+msgstr "标签"
msgid "Language"
msgstr "语言"
msgid "Language and Style"
-msgstr ""
+msgstr "语言和外观"
msgid "Lead Development"
-msgstr "开发主管"
+msgstr "开发向导"
+
+msgid "Leases"
+msgstr "租约"
msgid "Leasefile"
-msgstr ""
+msgstr "租约文件"
msgid "Leasetime"
-msgstr ""
+msgstr "租约过期"
msgid "Leasetime remaining"
-msgstr ""
+msgstr "租约剩余"
msgid "Legend:"
-msgstr ""
+msgstr "图例："
msgid ""
"Let pppd replace the current default route to use the PPP interface after "
"successful connect"
-msgstr ""
+msgstr "pppd连接成功后设为默认路由"
msgid "Let pppd run this script after establishing the PPP link"
-msgstr ""
+msgstr "PPP连接建立后运行这此脚本"
msgid "Let pppd run this script before tearing down the PPP link"
-msgstr ""
+msgstr "PPP连接断开前运行此脚本"
msgid "Limit"
-msgstr ""
+msgstr "最大"
msgid "Link"
-msgstr "连接"
+msgstr "链接"
msgid "Link On"
-msgstr ""
+msgstr "已链接"
msgid ""
"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
"requests to"
-msgstr ""
+msgstr "<abbr title=\"Domain Name System\">DNS</abbr>服务器转发请求表"
msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
+msgstr "允许RFC1918响应的域名表"
msgid "Listening port for inbound DNS queries"
-msgstr ""
+msgstr "入站DNS查询的监听端口"
msgid "Load"
-msgstr ""
+msgstr "负载"
+
+msgid "Load Average"
+msgstr "平均负载"
msgid "Loading"
-msgstr ""
+msgstr "载入中"
msgid "Local Time"
-msgstr ""
+msgstr "本地时间"
msgid "Local domain"
-msgstr ""
+msgstr "本地域名"
msgid ""
"Local domain specification. Names matching this domain are never forwared "
"and resolved from DHCP or hosts files only"
-msgstr ""
+msgstr "本地域名规则。从不转发和处理只源自DHCP或Hosts文件的本地域名数据。"
msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
+msgstr "本地域名后缀追加到DHCP和Hosts文件条目"
+
+msgid "localises the hostname depending on its subnet"
+msgstr "根据子网本地化主机名"
msgid "Local server"
-msgstr ""
+msgstr "本地服务器"
msgid ""
"Localise hostname depending on the requesting subnet if multiple IPs are "
"available"
-msgstr ""
+msgstr "如果多个IP可用，则定位host名依赖于请求子网"
msgid "Localise queries"
-msgstr ""
+msgstr "定位查询"
msgid "Log output level"
-msgstr ""
+msgstr "日志记录等级"
msgid "Log queries"
-msgstr ""
+msgstr "日志查询"
msgid "Logging"
-msgstr ""
+msgstr "日志"
msgid "Login"
msgstr "登录"
msgid "Logout"
-msgstr "登出"
+msgstr "退出"
+
+msgid "LuCI Components"
+msgstr "LuCI 组件"
msgid "Lowest leased address as offset from the network address."
-msgstr ""
+msgstr "分配IP的最小值"
msgid "MAC"
-msgstr "MAC"
+msgstr "硬件地址"
msgid "MAC Address"
-msgstr ""
+msgstr "MAC地址"
msgid "MAC-Address"
-msgstr ""
+msgstr "MAC-地址"
msgid "MAC-Address Filter"
msgstr "MAC-地址过滤"
-#, fuzzy
msgid "MAC-Filter"
-msgstr "过滤器"
+msgstr "MAC-过滤器"
+
+msgid "Memory"
+msgstr "内存"
msgid "MAC-List"
msgstr "MAC-列表"
msgid "MTU"
-msgstr ""
+msgstr "MTU"
msgid ""
"Make sure that you provide the correct pin code here or you might lock your "
"sim card!"
-msgstr ""
+msgstr "请确认pin码正确，并且没有锁定你的sim卡。"
msgid "Master"
msgstr "Master"
msgstr "Master + WDS"
msgid "Maximum Rate"
-msgstr ""
+msgstr "最高速率"
msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
+msgstr "允许的最大活跃DHCP租约数"
msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
+msgstr "允许的最大并发DNS查询数"
msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
+msgstr "允许的最大EDNS.0 UDP报文大小"
msgid "Maximum hold time"
-msgstr ""
+msgstr "最大有效时间"
msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Memory"
-msgstr ""
+msgstr "最大租约地址数量"
msgid "Memory usage (%)"
-msgstr ""
+msgstr "内存使用率(%)"
msgid "Metric"
-msgstr "Metric"
+msgstr "跃点数"
msgid "Minimum Rate"
-msgstr ""
+msgstr "最低速率"
msgid "Minimum hold time"
-msgstr ""
+msgstr "最低有效时间"
msgid "Mode"
msgstr "模式"
msgid "Modem device"
-msgstr ""
+msgstr "Modem 设备"
msgid "Monitor"
-msgstr ""
+msgstr "监听"
msgid ""
"Most of them are network servers, that offer a certain service for your "
"Configuration Interface\">LuCI</abbr>, doing mesh routing, sending e-"
"mails, ..."
msgstr ""
+"这里大部分是为设备或网络提供特定服务的，比如shell访问，路由转换，发送E-mail"
+"等..."
msgid "Mount Entry"
-msgstr ""
+msgstr "挂载项"
msgid "Mount Point"
-msgstr ""
+msgstr "挂载点"
msgid "Mount Points"
-msgstr "挂接点"
+msgstr "挂载点"
msgid "Mount Points - Mount Entry"
-msgstr ""
+msgstr "挂载点-Mount"
msgid "Mount Points - Swap Entry"
-msgstr ""
+msgstr "挂载点-Swap"
msgid ""
"Mount Points define at which point a memory device will be attached to the "
"filesystem"
-msgstr ""
+msgstr "挂载点可以设置设备被挂载在文件系统中的位置。"
msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
+msgstr "挂载选项"
msgid "Mounted file systems"
-msgstr ""
+msgstr "已挂载的文件系统"
msgid "Move down"
-msgstr ""
+msgstr "下移"
msgid "Move up"
-msgstr ""
+msgstr "上移"
msgid "Multicast Rate"
-msgstr ""
+msgstr "组播速率"
msgid "NAS ID"
-msgstr ""
+msgstr "NAS ID"
msgid "Name"
-msgstr "名字"
+msgstr "名称"
msgid "Name of the new interface"
-msgstr ""
+msgstr "新接口的名称"
msgid "Name of the new network"
-msgstr ""
+msgstr "新网络的名称"
msgid "Navigation"
-msgstr ""
+msgstr "导航"
msgid "Network"
msgstr "网络"
+msgid "Netmask"
+msgstr "子网掩码"
+
msgid "Network Utilities"
-msgstr ""
+msgstr "网络工具"
msgid "Network boot image"
-msgstr ""
+msgstr "网络启动文件"
msgid "Networks"
-msgstr ""
+msgstr "网络"
msgid "Next »"
-msgstr ""
+msgstr "下一步"
msgid "No address configured on this interface."
-msgstr ""
+msgstr "本接口未设置地址"
msgid "No chains in this table"
-msgstr ""
+msgstr "本表中没有链路"
msgid "No files found"
-msgstr ""
+msgstr "文件未找到"
msgid "No information available"
-msgstr ""
+msgstr "无可用信息"
msgid "No negative cache"
-msgstr ""
+msgstr "无效缓存"
msgid "No network configured on this device"
-msgstr ""
+msgstr "本设备未配置网络"
msgid "No password set!"
-msgstr ""
+msgstr "未设置密码！"
msgid "No rules in this chain"
-msgstr ""
+msgstr "本链路没有规则"
msgid "Noise"
-msgstr "噪音"
+msgstr "噪声"
msgid "None"
-msgstr ""
+msgstr "无"
msgid "Normal"
-msgstr ""
+msgstr "正常"
msgid "Not associated"
-msgstr ""
+msgstr "未关联"
msgid "Not configured"
-msgstr "未配置"
+msgstr "未设置"
msgid ""
"Note: If you choose an interface here which is part of another network, it "
"will be moved into this network."
-msgstr ""
+msgstr "注意:如果你在此处选择的接口是另一个网络的一部分，那将会迁入这个网络。"
msgid "Notice"
+msgstr "注意"
+
+msgid ""
+"Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> changes "
+"have to be confirmed by clicking Changes - Save & Apply before being "
+"applied."
msgstr ""
+"注意：在<abbr title=\"Lua Configuration Interface\">LuCI</abbr>中，点击 保存"
+"&应用 后设置才会生效。"
msgid "Number of failed connection tests to initiate automatic reconnect"
-msgstr ""
+msgstr "用于启动自动重新连接的失败连接尝试数目"
+
+msgid ""
+"On the following pages you can adjust all important settings of your router."
+msgstr "本页可以设置路由器的重要参数。"
msgid "OK"
msgstr "OK"
msgid "OPKG error code %i"
-msgstr ""
+msgstr "OPKG 错误代码 %i"
msgid "OPKG-Configuration"
-msgstr "OPKG包管理配置"
+msgstr "OPKG配置"
msgid "Off-State Delay"
-msgstr ""
+msgstr "关态延迟"
msgid ""
"On this page you can configure the network interfaces. You can bridge "
"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
"<samp>eth0.1</samp>)."
msgstr ""
+"本页可配置网络接口。选中\"桥接接口\"可把几个接口组合配置成网桥，\"接口\"加入"
+"的多个接口须用空格隔开，也可用INTERFACE.VLANNR来标记 <abbr title=\"Virtual "
+"Local Area Network\">VLAN</abbr> 。(<abbr title=\"for example\">例如</abbr>: "
+"<samp>eth0.1</samp>)"
msgid "On-State Delay"
-msgstr ""
+msgstr "开起延迟"
msgid "One or more fields contain invalid values!"
-msgstr ""
+msgstr "一个或多个选项键值有误！"
msgid "One or more required fields have no value!"
-msgstr ""
+msgstr "一个或多个必选键值空白！"
msgid "Open"
-msgstr ""
+msgstr "开启"
msgid "Option changed"
-msgstr ""
+msgstr "修改的设置"
msgid "Option removed"
-msgstr ""
+msgstr "放弃的设置"
msgid "Options"
-msgstr "操作"
+msgstr "设置"
msgid "Other:"
-msgstr ""
+msgstr "其余："
msgid "Out"
-msgstr ""
+msgstr "出口"
msgid "Outbound:"
-msgstr ""
+msgstr "出站："
msgid "Outdoor Channels"
-msgstr ""
+msgstr "户外信道"
msgid ""
"Override the netmask sent to clients. Normally it is calculated from the "
"subnet that is served."
-msgstr ""
+msgstr "更新发送给客户端的子网掩码。这通常由子网计算得出。"
msgid "Overview"
-msgstr ""
+msgstr "总览"
msgid "Owner"
-msgstr ""
+msgstr "所有者"
msgid "PID"
-msgstr ""
+msgstr "PID"
msgid "PIN code"
-msgstr ""
+msgstr "PIN 码"
-#, fuzzy
msgid "PPP Settings"
-msgstr "设置"
+msgstr "PPP 设置"
msgid "PPPoA Encapsulation"
-msgstr ""
+msgstr "PPPoA封包"
msgid "Package libiwinfo required!"
-msgstr ""
+msgstr "软件包需要libiwinfo！"
msgid "Package lists"
-msgstr "数据包列表"
+msgstr "软件包列表"
msgid "Package lists updated"
-msgstr "新数据包列表"
+msgstr "已更新软件包列表"
msgid "Package name"
-msgstr "包名"
+msgstr "软件包名称"
msgid "Packets"
-msgstr "包"
+msgstr "数据包"
msgid "Password"
msgstr "密码"
msgid "Password authentication"
-msgstr ""
+msgstr "密码验证"
msgid "Password of Private Key"
-msgstr ""
+msgstr "私有密钥"
msgid "Password successfully changed"
-msgstr "密码更新成功"
+msgstr "密码已修改"
msgid "Path to CA-Certificate"
-msgstr ""
+msgstr "CA证书路径"
msgid "Path to Private Key"
-msgstr ""
+msgstr "私钥路径"
msgid "Path to executable which handles the button event"
-msgstr ""
+msgstr "处理按键的可执行文件路径"
msgid "Peak:"
-msgstr ""
+msgstr "峰值"
+
+msgid "Perform Actions"
+msgstr "执行操作"
msgid "Perform reboot"
-msgstr ""
+msgstr "执行重启"
-#, fuzzy
msgid "Physical Settings"
-msgstr "基本设置"
+msgstr "物理设置"
msgid "Pkts."
-msgstr "Pkts."
+msgstr "报文数"
msgid "Please enter your username and password."
-msgstr "请输入您的用户名和密码"
+msgstr "请输入用户名和密码。"
msgid "Please wait: Device rebooting..."
-msgstr "请ç\89å¾\85ï¼\9a设å¤\87æ£å\9c¨é\87\8då\90¯ä¸â\80¦"
+msgstr "设å¤\87é\87\8då\90¯ä¸..."
msgid "Plugin path"
-msgstr ""
+msgstr "插件路径"
msgid "Policy"
msgstr "策略"
msgid "Port"
msgstr "端口"
+msgid "Ports"
+msgstr "端口"
+
msgid "Port %d"
-msgstr ""
+msgstr "端口 %d"
msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
+msgstr "端口 %d 同时存在与多个VLAN中！"
msgid ""
"Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default VLAN "
"ID added to received untagged frames."
msgstr ""
+"端口的<abbr title=\"Primary VLAN IDs\">PVIDs</abbr>指定了添加所接收的未标记桢"
+"的默认VLAN号。"
msgid "Port PVIDs on %q"
-msgstr ""
-
-msgid "Ports"
-msgstr "端口"
+msgstr "端口的PVIDs在 %q"
msgid "Post-commit actions"
-msgstr "提交操作"
+msgstr "Post-commit 操作"
msgid "Power"
-msgstr ""
+msgstr "Power"
+
+msgid ""
+"prevents caching of negative <abbr title=\"Domain Name System\">DNS</abbr>-"
+"replies"
+msgstr "阻止缓存无效的<abbr title=\"Domain Name System\">DNS</abbr>回复"
+
+msgid "Prevents client to client communication"
+msgstr "禁止客户端间的通信"
msgid "Prevents client-to-client communication"
-msgstr ""
+msgstr "禁止客户端间的通信"
msgid "Primary"
-msgstr "主要"
+msgstr "主要的"
msgid "Proceed"
-msgstr ""
+msgstr "执行"
msgid "Proceed reverting all settings and resetting to firmware defaults?"
-msgstr ""
+msgstr "放弃所有配置并将路由恢复出厂设置？"
msgid "Processes"
-msgstr "处理"
+msgstr "进程"
msgid "Processor"
-msgstr ""
+msgstr "处理器"
msgid "Project Homepage"
msgstr "项目主页"
msgid "Prot."
-msgstr ""
+msgstr "协议"
msgid "Protocol"
msgstr "协议"
+msgid "Provide (Access Point)"
+msgstr "提交 ？(接入点)"
+
msgid "Provide new network"
-msgstr ""
+msgstr "提交新网络"
msgid "Pseudo Ad-Hoc"
-msgstr "Pseudo Ad-Hoc"
+msgstr "伪装 Ad-Hoc"
msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr ""
+msgstr "伪装 Ad-Hoc (ahdemo)"
msgid "RTS/CTS Threshold"
-msgstr ""
+msgstr "RTS/CTS 阈值"
msgid "RX"
msgstr "接收"
msgid "Radius-Port"
-msgstr ""
+msgstr "Radius-端口"
msgid "Radius-Server"
-msgstr ""
+msgstr "Radius-服务器"
msgid ""
"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
"Configuration Protocol\">DHCP</abbr>-Server"
msgstr ""
+"根据<code>/etc/ethers</code>来配置<abbr title=\"Dynamic Host Configuration "
+"Protocol\">DHCP</abbr>服务器"
msgid ""
"Really delete this interface? The deletion cannot be undone!\n"
"You might loose access to this router if you are connected via this "
"interface."
msgstr ""
+"真的要删除这个接口？如果你使用此接口管理路由，你可能无法再管理你的路由器！"
msgid ""
"Really delete this wireless network? The deletion cannot be undone!\n"
"You might loose access to this router if you are connected via this network."
msgstr ""
+"真的要删除这个网络？如果你使用此网络管理路由，你可能无法再管理你的路由器！"
msgid ""
"Really shutdown interface \"%s\" ?\n"
"You might loose access to this router if you are connected via this "
"interface."
-msgstr ""
+msgstr "真的要关闭接口？如果你使用此接口管理路由，你可能无法再管理你的路由器！"
msgid "Realtime Connections"
-msgstr ""
+msgstr "实时连接"
msgid "Realtime Load"
-msgstr ""
+msgstr "实时负载"
msgid "Realtime Traffic"
-msgstr ""
+msgstr "实时流量"
msgid "Rebind protection"
-msgstr ""
+msgstr "重绑定保护"
msgid "Reboot"
msgstr "重启"
msgid "Reboots the operating system of your device"
-msgstr ""
+msgstr "重启设备"
msgid "Receive"
-msgstr ""
+msgstr "接收"
msgid "Receiver Antenna"
-msgstr ""
+msgstr "接收天线"
msgid "Reconnect this interface"
-msgstr ""
+msgstr "重连此接口"
msgid "Reconnecting interface"
-msgstr ""
+msgstr "重连接口"
msgid "References"
msgstr "参考"
msgid "Regulatory Domain"
-msgstr ""
+msgstr "约束域"
msgid "Remove"
msgstr "移除"
msgid "Repeat scan"
-msgstr ""
+msgstr "重复扫描"
msgid "Replace default route"
-msgstr ""
+msgstr "重置默认路由"
msgid "Replace entry"
-msgstr ""
+msgstr "重置条目"
msgid "Replace wireless configuration"
-msgstr ""
+msgstr "重置无线配置"
msgid "Reset"
-msgstr "重置"
+msgstr "复位"
msgid "Reset Counters"
-msgstr ""
+msgstr "复位计数器"
msgid "Reset router to defaults"
-msgstr ""
+msgstr "恢复出厂设置"
msgid "Reset switch during setup"
-msgstr ""
+msgstr "设置时复位交换机"
msgid "Resolv and Hosts Files"
-msgstr ""
+msgstr "Resolv和Hosts文件"
msgid "Resolve file"
-msgstr ""
+msgstr "解析文件"
msgid "Restart Firewall"
msgstr "重启防火墙"
msgid "Restore backup"
-msgstr ""
+msgstr "恢复配置"
msgid "Reveal/hide password"
-msgstr ""
+msgstr "显示/隐藏 密码"
msgid "Revert"
-msgstr ""
+msgstr "放弃"
msgid "Root"
-msgstr ""
+msgstr "Root"
msgid "Root directory for files served via TFTP"
-msgstr ""
+msgstr "TFTP服务器根目录"
msgid "Routes"
-msgstr "路由"
+msgstr "路由表"
+
+msgid "Router Name"
+msgstr "系统名称"
+
+msgid "Router Model"
+msgstr "路由型号"
msgid ""
"Routes specify over which interface and gateway a certain host or network "
"can be reached."
-msgstr ""
+msgstr "路由表描述了数据包的可达路径。"
msgid "Rule #"
-msgstr ""
+msgstr "规则 #"
msgid "Run a filesystem check before mounting the device"
-msgstr ""
+msgstr "挂载设备前运行文件系统检查"
msgid "Run filesystem check"
-msgstr ""
+msgstr "运行文件系统检查"
msgid "SSID"
msgstr "SSID"
msgstr "保存"
msgid "Save & Apply"
-msgstr "保存& 应用"
+msgstr "保存&应用"
msgid "Save & Apply"
-msgstr ""
+msgstr "保存&应用"
msgid "Scan"
msgstr "搜索"
msgid "Scheduled Tasks"
-msgstr ""
+msgstr "计划任务"
msgid "Search file..."
-msgstr "æ\90\9cç´¢æ\96\87件â\80¦"
+msgstr "æ\9f¥æ\89¾æ\96\87件..."
msgid ""
"Seconds to wait for the modem to become ready before attempting to connect"
-msgstr ""
+msgstr "Modem尝试连接的等待准备时间"
msgid "Section added"
-msgstr ""
+msgstr "已添加区域"
msgid "Section removed"
-msgstr ""
+msgstr "已移除区域"
msgid "See \"mount\" manpage for details"
-msgstr ""
+msgstr "详细参见\"mount\"联机帮助"
msgid "Separate Clients"
-msgstr ""
+msgstr "隔离客户端"
msgid "Separate WDS"
-msgstr ""
+msgstr "隔离 WDS"
msgid "Server"
-msgstr ""
+msgstr "服务器"
msgid "Server IPv4-Address"
-msgstr ""
+msgstr "IPv4-地址服务器"
msgid "Service type"
-msgstr ""
+msgstr "服务类型"
msgid "Services"
-msgstr ""
+msgstr "服务"
msgid "Services and daemons perform certain tasks on your device."
-msgstr ""
+msgstr "路由器上正在运行的任务和服务。"
msgid "Settings"
msgstr "设置"
msgid "Setup wait time"
-msgstr ""
+msgstr "设置缓冲时间"
msgid "Shutdown this interface"
-msgstr ""
+msgstr "关闭这个接口"
msgid "Signal"
msgstr "信号"
msgid "Size"
-msgstr ""
+msgstr "大小"
msgid "Skip"
-msgstr ""
+msgstr "忽略"
msgid "Skip to content"
-msgstr ""
+msgstr "跳到内容"
msgid "Skip to navigation"
-msgstr ""
+msgstr "跳到导航"
msgid "Slot time"
-msgstr ""
+msgstr "时隙"
msgid "Software"
-msgstr "软件"
+msgstr "软件包"
msgid "Some fields are invalid, cannot save values!"
-msgstr ""
+msgstr "某些项的键值无效，无法保存！"
msgid ""
"Sorry. OpenWrt does not support a system upgrade on this platform.<br /> You "
"need to manually flash your device."
-msgstr ""
+msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
msgid "Sort"
-msgstr ""
+msgstr "排序"
msgid "Source"
-msgstr ""
+msgstr "源地址"
msgid "Specifies the button state to handle"
-msgstr ""
+msgstr "指定按钮的行为"
msgid "Specifies the directory the device is attached to"
-msgstr ""
+msgstr "指定设备的连接目录"
msgid "Specify additional command line arguments for pppd here"
-msgstr ""
+msgstr "指定其他命令行参数到pppd"
msgid "Specify the secret encryption key here."
-msgstr ""
+msgstr "指定安全加密"
msgid "Start"
-msgstr "开始"
+msgstr "起始"
msgid "Static IPv4 Routes"
-msgstr ""
+msgstr "静态IPv4路由"
msgid "Static IPv6 Routes"
-msgstr ""
+msgstr "静态IPv6路由"
msgid "Static Leases"
-msgstr ""
+msgstr "静态地址分配"
msgid "Static Routes"
-msgstr ""
+msgstr "静态路由"
msgid "Static WDS"
-msgstr ""
+msgstr "静态 WDS"
msgid ""
"Static leases are used to assign fixed IP addresses and symbolic hostnames "
"to DHCP clients. They are also required for non-dynamic interface "
"configurations where only hosts with a corresponding lease are served."
msgstr ""
+"静态租约被用于分配给DHCP客户端以固定的IP地址和主机标识。并且要求接口为非动态"
+"配置，只有合法主机才能连接。"
msgid "Status"
msgstr "状态"
msgid "Strict order"
-msgstr ""
+msgstr "准确排序"
msgid "Submit"
msgstr "提交"
msgid "Swap Entry"
-msgstr ""
+msgstr "Swap项"
msgid "Switch"
-msgstr ""
+msgstr "交换机"
msgid "Switch %q"
-msgstr ""
+msgstr "交换机 %q"
msgid "System"
msgstr "系统"
msgstr "系统日志"
msgid "System Properties"
-msgstr ""
+msgstr "系统属性"
msgid "System log buffer size"
-msgstr ""
+msgstr "系统日志缓冲区大小"
msgid "TCP:"
-msgstr ""
+msgstr "TCP"
msgid "TFTP Settings"
-msgstr ""
+msgstr "TFTP设置"
msgid "TFTP server root"
-msgstr ""
+msgstr "TFTP根服务器"
msgid "TTL"
-msgstr ""
+msgstr "TTL"
msgid "TX"
msgstr "发送"
+msgid "TX / RX"
+msgstr "发送 / 接收"
+
msgid "Table"
msgstr "列表"
msgid "Target"
-msgstr ""
+msgstr "对象"
msgid "Terminate"
-msgstr ""
+msgstr "终止"
msgid "Thanks To"
msgstr "感谢"
+msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
+msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>开发团队"
+
msgid ""
"The <em>Device Configuration</em> section covers physical settings of the "
"radio hardware such as channel, transmit power or antenna selection which is "
"SSID capable). Per network settings like encryption or operation mode are "
"grouped in the <em>Interface Configuration</em>."
msgstr ""
+"<em>设备配置</em>项会更新无线的硬件物理设置，比如信道，发射功率，或天线选择。"
msgid ""
"The <em>libiwinfo</em> package is not installed. You must install this "
"component for working wireless configuration!"
-msgstr ""
+msgstr "<em>libiwinfo</em>软件包未安装，必需安装此组件以配置无线！"
msgid ""
"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
"code> and <code>_</code>"
msgstr ""
+"合法字符：<code>A-Z</code>, <code>a-z</code>, <code>0-9</code> 和 <code>_</"
+"code>"
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
msgstr ""
+"存储器或分区的设备文件 (<abbr title=\"for example\">例如</abbr> <code>/dev/"
+"sda1</code>)"
msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-msgstr ""
+msgstr "modem的设备节点，例如/dev/ttyUSB0"
msgid ""
"The filesystem that was used to format the memory (<abbr title=\"for example"
"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
"samp>)"
msgstr ""
+"用于格式化存储器的文件系统 (<abbr title=\"for example\">例如</abbr> "
+"<samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></samp>)"
msgid ""
"The flash image was uploaded. Below is the checksum and file size listed, "
"compare them with the original file to ensure data integrity.<br /> Click "
"\"Proceed\" below to start the flash procedure."
msgstr ""
+"固件已上传，请注意核对文件大小和校验值！<br /> 点击 \"执行\" 开始刷写固件，刷"
+"新过程请勿断电！"
-msgid "The following changes have been committed"
-msgstr ""
+msgid "The following changes have been comitted"
+msgstr "以下更改已提交"
+
+msgid "The following changes have been applied"
+msgstr "以下更改已生效"
msgid "The following changes have been reverted"
-msgstr "ä¸\8bå\88\97ä¿®æ\94¹å·²æ\81¢å¤\8d"
+msgstr "以ä¸\8bæ\9b´æ\94¹å·²æ\94¾å¼\83"
msgid ""
"The following files are detected by the system and will be kept "
"automatically during sysupgrade"
-msgstr ""
+msgstr "更新固件时要保存的文件"
msgid "The following rules are currently active on this system."
-msgstr ""
+msgstr "下面是系统中的活跃连接。"
msgid ""
"The hardware is not multi-SSID capable and existing configuration will be "
"replaced if you proceed."
-msgstr ""
+msgstr "本机的硬件不支持多SSID，继续进行将会替换现有配置。"
msgid ""
"The network ports on your router can be combined to several <abbr title="
"segments. Often there is by default one Uplink port for a connection to the "
"next greater network like the internet and other ports for a local network."
msgstr ""
+"该设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</abbr>，"
+"并支持电脑间的直接通讯；<abbr title=\"Virtual Local Area Network\">VLAN</"
+"abbr>也常用于分割不同网段；默认通常是一条上传端口连接ISP，其余端口为本地子"
+"网。"
msgid ""
"The realm which will be displayed at the authentication prompt for protected "
"pages."
-msgstr ""
+msgstr "在有提示验证保护的网页时显示验证范围。"
msgid ""
"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
"address of your computer to reach the device again, depending on your "
"settings."
msgstr ""
+"正在刷新系统...<br /> 切勿关闭电源!<br /> 稍等数分钟即可重新连接到路由，可能"
+"需要更改计算机的IP地址以重新连接。"
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
-msgstr ""
+msgstr "不支持所上传的文件格式，请确认选择文件无误！"
msgid "There are no active leases."
-msgstr ""
+msgstr "没有活动的租约！"
msgid "There are no pending changes to apply!"
-msgstr ""
+msgstr "没有等待生效的更改！"
msgid "There are no pending changes to revert!"
-msgstr ""
+msgstr "没有更改可放弃！"
msgid "There are no pending changes!"
-msgstr ""
+msgstr "没有任何更改"
msgid ""
"There is no password set on this router. Please configure a root password to "
"protect the web interface and enable SSH."
-msgstr ""
+msgstr "尚未设置密码，请为root用户设置一个密码以保护路由器和开启SSH。"
msgid ""
"These commands will be executed automatically when a given <abbr title="
"\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
"allowing changes to be applied instantly."
msgstr ""
+"当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效"
+"后，这些命令将被自动执行。"
msgid ""
"This is a list of shell glob patterns for matching files and directories to "
"include during sysupgrade"
+msgstr "系统升级时要保存的配置文件以及目录的串列清单"
+
+msgid ""
+"This is the administration area of <abbr title=\"Lua Configuration Interface"
+"\">LuCI</abbr>."
msgstr ""
+"这是<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的管理页面。"
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"abbr> in the local network"
msgstr ""
+"这是内网中唯一的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr>服务器"
msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
+msgstr "这里可以指定系统crontab中的计划任务。"
msgid ""
"This list gives an overview over currently running system processes and "
"their status."
-msgstr ""
+msgstr "这里显示了当前系统中正在运行的进程和其状态信息。"
msgid "This page allows the configuration of custom button actions"
-msgstr ""
+msgstr "本页可自定义按键行为。"
msgid "This page gives an overview over currently active network connections."
-msgstr ""
+msgstr "本页显示了活跃的网络连接概况。"
msgid "This section contains no values yet"
-msgstr ""
+msgstr "本区域尚无任何配置"
msgid "Time (in seconds) after which an unused connection will be closed"
-msgstr ""
+msgstr "自动断线空闲时间(s)"
msgid "Time Server (rdate)"
-msgstr ""
+msgstr "校时服务器(rdate)"
msgid "Timezone"
msgstr "时区"
+msgid "Total Available"
+msgstr "总共可用"
+
msgid "Traffic"
-msgstr "Traffic"
+msgstr "网络流量"
msgid "Transfer"
-msgstr "转发"
+msgstr "传输"
msgid "Transmission Rate"
-msgstr ""
+msgstr "发送速率"
msgid "Transmit"
-msgstr ""
+msgstr "发射"
msgid "Transmit Power"
-msgstr ""
+msgstr "发射功率"
msgid "Transmitter Antenna"
-msgstr ""
+msgstr "发射天线"
+
+msgid "transmitted / received"
+msgstr "已传输 / 已接收"
msgid "Trigger"
-msgstr ""
+msgstr "触发"
msgid "Trigger Mode"
-msgstr ""
+msgstr "触发模式"
msgid "Tunnel Settings"
-msgstr ""
+msgstr "信道设置"
msgid "Turbo Mode"
-msgstr ""
+msgstr "Turbo 模式"
msgid "Tx-Power"
-msgstr ""
+msgstr "传输功率"
msgid "Type"
msgstr "类型"
msgid "UDP:"
-msgstr ""
+msgstr "UDP:"
msgid "UUID"
-msgstr ""
+msgstr "UUID"
msgid "Unknown Error"
msgstr "未知错误"
msgid "Unsaved Changes"
-msgstr "不保存更改"
+msgstr "未保存的配置"
msgid "Update package lists"
-msgstr "更新数据包列表"
+msgstr "更新软件列表"
msgid "Upgrade installed packages"
-msgstr ""
+msgstr "升级已装软件"
msgid "Upload an OpenWrt image file to reflash the device."
-msgstr ""
+msgstr "上传OpenWrt固件以刷新设备"
msgid "Upload image"
-msgstr ""
+msgstr "上传固件"
msgid "Uploaded File"
-msgstr "更新文件"
+msgstr "上传的文件"
msgid "Uptime"
-msgstr ""
+msgstr "运行时间"
msgid "Use <code>/etc/ethers</code>"
-msgstr ""
+msgstr "使用<code>/etc/ethers</code>"
msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
+msgstr "使用ISO/IEC 3166 alpha2国家代码"
msgid "Use as root filesystem"
-msgstr ""
+msgstr "作为根文件系统"
msgid "Use peer DNS"
-msgstr ""
+msgstr "使用对等DNS"
msgid ""
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
"requesting host."
-msgstr ""
+msgstr "使用<em>添加</em>按键来增加新的租约条目。"
msgid "Used"
-msgstr ""
+msgstr "已使用Used"
msgid "Used Key Slot"
-msgstr ""
+msgstr "已使用的密码"
msgid "Username"
msgstr "用户名"
msgid "VC-Mux"
-msgstr ""
+msgstr "VC-Mux"
msgid "VLAN"
msgstr "VLAN"
msgid "VLAN %d"
-msgstr ""
+msgstr "VLAN %d"
msgid "VLANs on %q"
-msgstr ""
+msgstr "VLANs on %q"
msgid "Version"
msgstr "版本"
msgstr "WDS"
msgid "WEP Open System"
-msgstr ""
+msgstr "WEP 开放认证"
msgid "WEP Shared Key"
-msgstr ""
+msgstr "WEP 共享密钥"
msgid "WEP passphrase"
-msgstr ""
+msgstr "WEP 密钥"
msgid "WMM Mode"
-msgstr ""
+msgstr "WMM 模式"
msgid "WPA passphrase"
-msgstr ""
+msgstr "WPA 密钥"
msgid ""
"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
"and ad-hoc mode) to be installed."
msgstr ""
+"WPA加密需要安装wpa_supplicant(客户端模式)或安装hostapd(接入点、点对点模式)。"
msgid "Waiting for router..."
-msgstr ""
+msgstr "等待路由器..."
msgid "Warning"
-msgstr ""
+msgstr "警告"
msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
+msgstr "警告: 有尚未保存的更改，重启后将丢失!"
msgid "Web <abbr title=\"User Interface\">UI</abbr>"
+msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
+
+msgid ""
+"When flashing a new firmware with <abbr title=\"Lua Configuration Interface"
+"\">LuCI</abbr> these files will be added to the new firmware installation."
msgstr ""
+"当刷写带<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的新固件时，这"
+"些文件将被加入到新的固件中。"
msgid "Wifi"
-msgstr "Wifi"
+msgstr "无线"
msgid "Wifi networks in your local environment"
-msgstr "本地连接的wifi网络"
+msgstr "本地无线热点"
+
+msgid ""
+"With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> network "
+"members can automatically receive their network settings (<abbr title="
+"\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title=\"Domain Name "
+"System\">DNS</abbr>-server, ...)."
+msgstr ""
+"用户可以通过<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>自"
+"动接收网络的(<abbr title=\"Internet Protocol\">IP</abbr>地址，子网掩码，"
+"<abbr title=\"Domain Name System\">DNS</abbr>服务器, ...)等配置信息。"
+
+msgid "Wireless"
+msgstr "无线"
msgid "Wireless Adapter"
-msgstr "无线网卡"
+msgstr "无线适配器"
-#, fuzzy
msgid "Wireless Network"
-msgstr "无线网卡"
+msgstr "无线网络"
-#, fuzzy
msgid "Wireless Overview"
-msgstr "无线网卡"
+msgstr "无线概况"
+
+msgid "Wireless Scan"
+msgstr "搜索无线"
-#, fuzzy
msgid "Wireless Security"
-msgstr "无线网卡"
+msgstr "无线安全"
msgid "Wireless is disabled or not associated"
-msgstr ""
+msgstr "未开启无线或未安装无线"
msgid "Write received DNS requests to syslog"
-msgstr ""
+msgstr "将DNS请求写入系统日志"
msgid "XR Support"
-msgstr ""
+msgstr "XR 支持"
msgid ""
"You can specify multiple DNS servers here, press enter to add a new entry. "
"Servers entered here will override automatically assigned ones."
-msgstr ""
+msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
msgid ""
"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
+msgstr "LUCI的正常运行需要开启浏览器的Java Script支持。"
msgid ""
"You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
"\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
msgstr ""
+"你需要安装\"comgt\" 以支持 UMTS/GPRS, \"ppp-mod-pppoe\" 以支持 PPPoE, \"ppp-"
+"mod-pppoa\" 以支持 PPPoA \"pptp\" 以支持 PPtP。"
-msgid "any"
+msgid ""
+"You are about to join the wireless network <em><strong>%s</strong></em>. In "
+"order to complete the process, you need to provide some additional details."
+msgstr "即将加入无线网络<em><strong>%s</strong></em>，这需要填写一些额外信息。"
+
+msgid ""
+"You can run several wifi networks with one device. Be aware that there are "
+"certain hardware and driverspecific restrictions. Normally you can operate 1 "
+"Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network simultaneously."
msgstr ""
+"一台设备可以用虚拟方式同时运行几个无线网络。但注意会有硬件或软件限制。通常可"
+"以运行一个点对点无线网络，或同时运行三个Master模式和一个客户端模式的无线网"
+"络。"
+
+msgid ""
+"You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP support"
+msgstr "需要安装\"ppp-mod-pppoe\"以支持PPPoe，\"pptp\"以支持PPtP"
+
+msgid ""
+"You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
+msgstr "需要安装<a href='%s'><em>wpa-supplicant</em></a>以支持WPA加密!"
+
+msgid ""
+"You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> to "
+"use WPA!"
+msgstr "需要安装<a href='%s'>Broadcom<em>nas</em> supplicant</a>以支持WPA加密!"
+
+msgid "any"
+msgstr "任意"
msgid "auto"
msgstr "自动"
msgid "back"
-msgstr "返回"
+msgstr "后退"
msgid "bridged"
-msgstr ""
+msgstr "已桥接"
msgid "buffered"
-msgstr ""
+msgstr "已缓冲"
+
+msgid "Buffered"
+msgstr "已缓冲"
msgid "cached"
-msgstr ""
+msgstr "已缓存"
+
+msgid "Cached"
+msgstr "已缓存"
msgid "creates a bridge over specified interface(s)"
-msgstr ""
+msgstr "在指定接口创建桥接(s)"
msgid "defaults to <code>/etc/httpd.conf</code>"
-msgstr ""
+msgstr "默认为<code>/etc/httpd.conf</code>"
msgid "disable"
msgstr "禁用"
msgid "expired"
-msgstr ""
+msgstr "已过期"
msgid ""
"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"abbr>-leases will be stored"
msgstr ""
+"存放<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>租约的文件"
msgid "free"
-msgstr ""
+msgstr "空闲"
+
+msgid "Free"
+msgstr "空闲"
msgid "help"
-msgstr ""
+msgstr "帮助"
msgid "if target is a network"
-msgstr ""
+msgstr "如果对象是一个网络"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
+msgstr "本地<abbr title=\"Domain Name System\">DNS</abbr>解析文件"
msgid "no"
-msgstr ""
+msgstr "否"
msgid "none"
-msgstr ""
+msgstr "无"
msgid "off"
-msgstr ""
+msgstr "关闭"
msgid "routed"
-msgstr ""
+msgstr "路由守护"
msgid "static"
msgstr "静态"
msgid "tagged"
-msgstr ""
+msgstr "标签"
msgid "unlimited"
-msgstr ""
+msgstr "无限制"
msgid "unspecified"
-msgstr ""
+msgstr "未指定"
msgid "unspecified -or- create:"
-msgstr ""
+msgstr "未指定或创建："
msgid "untagged"
-msgstr ""
+msgstr "无标签"
msgid "yes"
-msgstr ""
+msgstr "是"
msgid "« Back"
-msgstr ""
+msgstr "« 后退"
+
+msgid "User Interface"
+msgstr "用户界面"
+
+msgid "(hidden)"
+msgstr "(隐藏)"
+
+msgid "(optional)"
+msgstr "(任意)"
+
+msgid "Aliases"
+msgstr "别名"
+
+msgid "First leased address"
+msgstr "起始分配地址"
+
+msgid "Local Network"
+msgstr "本地网络"
+
+msgid "Number of leased addresses"
+msgstr "地址租约数"
-#~ msgid "Hello!"
-#~ msgstr "你好!"
+msgid "Path"
+msgstr "路径"
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr "你可以在以下的页面修改路由器的所有重要参数."
+msgid "Resolvfile"
+msgstr "解析文件"
+
+msgid "Zone"
+msgstr "区域"
+
+msgid "additional hostfile"
+msgstr "附加的主机文件"
+
+msgid "automatic"
+msgstr "自动"
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> 开发组"
+msgid "automatically reconnect"
+msgstr "自动重连"
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr "这是LuCI的管理界面"
+msgid "concurrent queries"
+msgstr "并发查询"
-#~ msgid "User Interface"
-#~ msgstr "用户界面"
+msgid "disconnect when idle for"
+msgstr "空闲自动断开"
-#~ msgid "enable"
-#~ msgstr "启用"
+msgid "don't cache unknown"
+msgstr "不缓存未知数据"
-#~ msgid "Devices"
-#~ msgstr "设备"
+msgid "installed"
+msgstr "已安装"
-#~ msgid "Path"
-#~ msgstr "路径"
+msgid "manual"
+msgstr "手册"
-#~ msgid "The following changes have been applied"
-#~ msgstr "下列修改已生效"
+msgid "not installed"
+msgstr "未安装"
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "使用<abbr title=\"Lua Configuration Interface\">LuCI</abbr>升级新的"
-#~ "firmware时这些文件将会添加到新安装的firmware里"
+msgid "query port"
+msgstr "查询端口"
-#, fuzzy
-#~ msgid "Wireless Scan"
-#~ msgstr "无线"
+msgid "all"
+msgstr "全部"
-#~ msgid "Zone"
-#~ msgstr "区"
+msgid "Code"
+msgstr "代码"
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "静态"
+msgid "Distance"
+msgstr "距离"
-#~ msgid "installed"
-#~ msgstr "已安装"
+msgid "Legend"
+msgstr "图例"
-#~ msgid "not installed"
-#~ msgstr "未安装"
+msgid "Library"
+msgstr "Library"
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "网络"
+msgid "see '%s' manpage"
+msgstr "详参 '%s' 联机帮助"
-#~ msgid "all"
-#~ msgstr "全部"
+msgid "Package Manager"
+msgstr "软件包管理"
-#~ msgid "Statistics"
-#~ msgstr "ç»\9f计"
+msgid "Service"
+msgstr "æ\9c\8då\8a¡"
-#~ msgid "zone"
-#~ msgstr "区"
+msgid "Statistics"
+msgstr "统计"
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-06-25 16:21+0200\n"
-"Last-Translator: ruwen <zhaoruwen@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"POT-Creation-Date: 2009-05-19 19:35+0200\n"
+"PO-Revision-Date: 2011-04-22 01:14-0800\n"
+"Last-Translator: Our Teammates\n"
+"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
+"X-Generator: Translate Toolkit 1.1.1\n"
#. OpenVPN
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:1
#. Switch to basic configuration
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:3
msgid "« Switch to basic configuration"
-msgstr "切换到基本配置"
+msgstr "« 基本配置"
#. Switch to advanced configuration
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:4
msgid "Switch to advanced configuration »"
-msgstr "切换到高级配置"
+msgstr "高级配置 »"
#. Enabled
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:6
msgid "Enabled"
-msgstr "启用"
+msgstr "打开"
#. Started
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:7
msgid "Started"
-msgstr "å¼\80å§\8b"
+msgstr "å·²è¿\90è¡\8cç\9a\84"
#. no
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:8
msgid "no"
-msgstr "no"
+msgstr "否"
#. yes (%i)
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:9
msgid "yes (%i)"
-msgstr "yes (%i)"
+msgstr "是 (%i)"
#. Port
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:10
#. Instance \"%s\"
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:13
msgid "Instance \"%s\""
-msgstr ""
+msgstr "实例 \"%s\""
#. OpenVPN instances
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:15
msgid "OpenVPN instances"
-msgstr ""
+msgstr "OpenVPN 实例"
#. Below is a list of configured OpenVPN instances and their current state
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:16
msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
+msgstr "Openvpn已配置实例及其当前状态列表"
#. Daemon configuration
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:18
msgid "Daemon configuration"
-msgstr ""
+msgstr "后台配置"
#. Networking options
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:19
msgid "Networking options"
-msgstr "网络操作"
+msgstr "网络选项"
#. VPN options
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:20
msgid "VPN options"
-msgstr "VPN操作"
+msgstr "VPN 选项"
#. Cryptography settings
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:21
msgid "Cryptography settings"
-msgstr "å¯\86ç \81设置"
+msgstr "å\8a å¯\86设置"
#. Read configuration options from file
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:23
msgid "Read configuration options from file"
-msgstr ""
+msgstr "从配置文件读取配置选项"
#. Local host name or ip address
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:24
msgid "Local host name or ip address"
-msgstr "本地主机名或者IP地址"
+msgstr "本地主机名或ip地址"
#. Remote host name or ip address
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:25
msgid "Remote host name or ip address"
-msgstr ""
+msgstr "远程主机名或ip地址"
#. Randomly choose remote server
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:26
msgid "Randomly choose remote server"
-msgstr ""
+msgstr "随机选择远程服务器"
#. Major mode
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:27
msgid "Major mode"
-msgstr ""
+msgstr "主要模式"
#. Use protocol
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:28
msgid "Use protocol"
-msgstr ""
+msgstr "采用协议"
#. Connection retry interval
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:29
msgid "Connection retry interval"
-msgstr ""
+msgstr "连接重试时间间隔"
#. Connection timeout
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:30
#. Maximum connection attempt retries
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:31
msgid "Maximum connection attempt retries"
-msgstr ""
+msgstr "最大连接尝试次数"
#. Try to sense proxy settings automatically
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:32
msgid "Try to sense proxy settings automatically"
-msgstr ""
+msgstr "尝试自动检测代理设置"
#. Connect to remote host
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:33
#. Retry indefinitely on HTTP proxy errors
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:34
msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
+msgstr "无限重试直至代理正确"
#. Proxy timeout in seconds
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:35
msgid "Proxy timeout in seconds"
-msgstr ""
+msgstr "代理超时，单位秒"
#. Set extended HTTP proxy options
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:36
msgid "Set extended HTTP proxy options"
-msgstr ""
+msgstr "设置HTTP扩展代理选项"
#. Connect through Socks5 proxy
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:37
msgid "Connect through Socks5 proxy"
-msgstr ""
+msgstr "通过Sock5代理连接"
#. Retry indefinitely on Socks proxy errors
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:38
msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
+msgstr "无限重试直至Socks代理正确"
#. If hostname resolve fails, retry
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:39
msgid "If hostname resolve fails, retry"
-msgstr ""
+msgstr "如果主机名解析错误，重试"
#. Allow remote to change its IP or port
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:40
msgid "Allow remote to change its IP or port"
-msgstr ""
+msgstr "允许远程修改ip和端口"
#. Execute shell command on remote ip change
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:41
msgid "Execute shell command on remote ip change"
-msgstr ""
+msgstr "当远程ip改变时执行shell命令"
#. TCP/UDP port # for both local and remote
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:42
msgid "TCP/UDP port # for both local and remote"
-msgstr ""
+msgstr "TCP/UDP 端口 # 同时针对本地和远程"
#. TCP/UDP port # for local (default=1194)
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:43
msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
+msgstr "TCP/UDP 端口 # 本地l (默认值=1194)"
#. TCP/UDP port # for remote (default=1194)
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:44
msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
+msgstr "TCP/UDP 端口 # for 远程 (默认值=1194)"
#. Bind to local address and port
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:45
msgid "Bind to local address and port"
-msgstr ""
+msgstr "绑定本地地址和端口"
#. Do not bind to local address and port
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:46
msgid "Do not bind to local address and port"
-msgstr ""
+msgstr "不绑定本地地址和端口"
#. tun/tap device
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:47
msgid "tun/tap device"
-msgstr ""
+msgstr "tun/tap 设备"
#. Type of used device
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:48
msgid "Type of used device"
-msgstr ""
+msgstr "已用设备的类型"
#. Use tun/tap device node
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:49
msgid "Use tun/tap device node"
-msgstr ""
+msgstr "使用 tun/tap 设备节点"
#. Set the link layer address of the tap device
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:50
msgid "Set the link layer address of the tap device"
-msgstr ""
+msgstr "设置 tap 设备的数据链路层地址"
#. 'net30', 'p2p', or 'subnet'
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:51
msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
+msgstr "'net30', 'p2p', 或 '子网'"
#. Make tun device IPv6 capable
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:52
msgid "Make tun device IPv6 capable"
-msgstr ""
+msgstr "使 tun 设备兼容IPv6"
#. Configure device to use IP address
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:53
msgid "Configure device to use IP address"
-msgstr ""
+msgstr "配置设备使用ip地址"
#. Don't actually execute ifconfig
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:54
msgid "Don't actually execute ifconfig"
-msgstr ""
+msgstr "不实际执行ifconfig命令"
#. Don't warn on ifconfig inconsistencies
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:55
msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
+msgstr "ifconfig不一致时不警告"
#. Add route after establishing connection
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:56
msgid "Add route after establishing connection"
-msgstr ""
+msgstr "建立连接后添加路由"
#. Specify a default gateway for routes
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:57
msgid "Specify a default gateway for routes"
-msgstr ""
+msgstr "指定路由默认网关"
#. Specify a default metric for routes
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:58
msgid "Specify a default metric for routes"
-msgstr ""
+msgstr "指定路由默认权值"
-#. Delay n seconds after connection
+#. Delay n seconds after connection
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:59
msgid "Delay n seconds after connection "
-msgstr ""
+msgstr "连接后延迟n秒 "
#. Execute shell cmd after routes are added
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:60
msgid "Execute shell cmd after routes are added"
-msgstr ""
+msgstr "添加路由后执行shell命令"
#. Don't add routes automatically
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:61
msgid "Don't add routes automatically"
-msgstr ""
+msgstr "不自动添加路由"
#. Don't pull options from server
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:62
msgid "Don't pull options from server"
-msgstr ""
+msgstr "Don't pull options from server"
#. Automatically redirect default route
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:63
msgid "Automatically redirect default route"
-msgstr ""
+msgstr "自动重定向至默认路由"
#. Pass environment variables to script
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:64
msgid "Pass environment variables to script"
-msgstr ""
+msgstr "传递环境变量至脚本"
#. Shaping for peer bandwidth
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:65
msgid "Shaping for peer bandwidth"
-msgstr ""
+msgstr "改变结点带宽"
#. Set timeouts in server mode
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:66
msgid "Set timeouts in server mode"
-msgstr ""
+msgstr "设置服务器模式下的超时"
#. tun/tap inactivity timeout
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:67
msgid "tun/tap inactivity timeout"
-msgstr ""
+msgstr "tun/tap 休眠超时"
#. Remote ping timeout
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:68
msgid "Remote ping timeout"
-msgstr ""
+msgstr "远程ping超时"
#. Restart after remote ping timeout
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:69
msgid "Restart after remote ping timeout"
-msgstr ""
+msgstr "远程ping超时后重启"
#. Only process ping timeouts if routes exist
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:70
msgid "Only process ping timeouts if routes exist"
-msgstr ""
+msgstr "当且仅当路由存在时处理ping超时"
#. Ping remote every n seconds over TCP/UDP port
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:71
msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
+msgstr "每n秒ping一次远程 TCP/UDP 端口"
#. Configure a multi-homed UDP server
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:72
msgid "Configure a multi-homed UDP server"
-msgstr ""
+msgstr "配置多宿UDP服务器"
#. Optimize TUN/TAP/UDP writes
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:73
msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
+msgstr "优化 TUN/TAP/UDP 写入"
#. Remap SIGUSR1 signals
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:74
msgid "Remap SIGUSR1 signals"
-msgstr ""
+msgstr "重映射SIGUSR1信号"
#. Keep tun/tap device open on restart
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:75
msgid "Keep tun/tap device open on restart"
-msgstr ""
+msgstr "系统重启时自动打开 tun/tap 设备"
#. Keep remote IP address on restart
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:76
msgid "Keep remote IP address on restart"
-msgstr ""
+msgstr "系统重启时保存远程IP地址"
#. Keep local IP address on restart
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:77
msgid "Keep local IP address on restart"
-msgstr ""
+msgstr "系统重启时保存本地IP地址"
#. Don't re-read key on restart
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:78
msgid "Don't re-read key on restart"
-msgstr ""
+msgstr "系统重启时不重密钥值"
#. TOS passthrough (applies to IPv4 only)
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:79
msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
+msgstr "TOS passthrough (applies to IPv4 only)"
#. Set tun/tap device MTU
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:80
msgid "Set tun/tap device MTU"
-msgstr ""
+msgstr "设置tun/tap设备的MTU值"
#. Set tun/tap device overhead
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:81
msgid "Set tun/tap device overhead"
-msgstr ""
+msgstr "设置tun/tap设备的开销"
#. Set TCP/UDP MTU
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:82
msgid "Set TCP/UDP MTU"
-msgstr ""
+msgstr "设置TCP/UDP的MTU值"
#. Enable Path MTU discovery
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:83
msgid "Enable Path MTU discovery"
-msgstr ""
+msgstr "允许路径MTU发现"
#. Empirically measure MTU
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:84
msgid "Empirically measure MTU"
-msgstr ""
+msgstr "以历史值估算MTU值"
#. Enable internal datagram fragmentation
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:85
msgid "Enable internal datagram fragmentation"
-msgstr ""
+msgstr "允许内部数据报分片"
#. Set upper bound on TCP MSS
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:86
msgid "Set upper bound on TCP MSS"
-msgstr ""
+msgstr "设置TCP MSS的上限"
#. Set the TCP/UDP send buffer size
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:87
msgid "Set the TCP/UDP send buffer size"
-msgstr ""
+msgstr "设置TCP/UDP发送缓冲区大小"
#. Set the TCP/UDP receive buffer size
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:88
msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
+msgstr "设置TCP/UDP接收缓冲区大小"
#. Set tun/tap TX queue length
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:89
msgid "Set tun/tap TX queue length"
-msgstr ""
+msgstr "设置tun/tap发送队列长度"
#. Disable Paging
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:90
msgid "Disable Paging"
-msgstr ""
+msgstr "禁止分页"
#. Shell cmd to execute after tun device open
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:91
msgid "Shell cmd to execute after tun device open"
-msgstr ""
+msgstr "tun设备打开后运行shell命令行"
#. Delay tun/tap open and up script execution
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:92
msgid "Delay tun/tap open and up script execution"
-msgstr ""
+msgstr "延迟tun/tap的打开并加速脚本执行"
#. Shell cmd to run after tun device close
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:93
msgid "Shell cmd to run after tun device close"
-msgstr ""
+msgstr "tun设备关闭后运行shell命令行e"
#. Call down cmd/script before TUN/TAP close
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:94
msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
+msgstr "TUN/TAP关闭前关闭命令行及脚本"
#. Run up/down scripts for all restarts
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:95
msgid "Run up/down scripts for all restarts"
-msgstr ""
+msgstr "每次重启时运行脚本的开和关"
#. Set UID to user
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:96
msgid "Set UID to user"
-msgstr ""
+msgstr "为用户设置UID值"
#. Set GID to group
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:97
msgid "Set GID to group"
-msgstr ""
+msgstr "为群组设置GID值"
#. Chroot to directory after initialization
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:98
msgid "Chroot to directory after initialization"
-msgstr ""
+msgstr "初始化后改变根目录"
#. Change to directory before initialization
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:99
msgid "Change to directory before initialization"
-msgstr ""
+msgstr "初始化前改变根目录"
#. Daemonize after initialization
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:100
msgid "Daemonize after initialization"
-msgstr ""
+msgstr "初始化后进入后台运行"
#. Output to syslog and do not daemonize
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:101
msgid "Output to syslog and do not daemonize"
-msgstr ""
+msgstr "显式输出到syslog"
#. Run as an inetd or xinetd server
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:102
msgid "Run as an inetd or xinetd server"
-msgstr ""
+msgstr "以inetd或xinetd服务器的方式运行"
#. Write log to file
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:103
msgid "Write log to file"
-msgstr ""
+msgstr "保存日志至文件"
#. Append log to file
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:104
msgid "Append log to file"
-msgstr ""
+msgstr "添加日志至文件"
#. Don't log timestamps
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:105
msgid "Don't log timestamps"
-msgstr ""
+msgstr "不记录时间戳"
#. Write process ID to file
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:106
msgid "Write process ID to file"
-msgstr ""
+msgstr "记录进程ID至文件"
#. Change process priority
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:107
msgid "Change process priority"
-msgstr ""
+msgstr "改变进程优先级"
#. Echo parameters to log
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:108
msgid "Echo parameters to log"
-msgstr ""
+msgstr "把参数写入日志"
#. Set output verbosity
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:109
msgid "Set output verbosity"
-msgstr ""
+msgstr "设置输出冗余级别"
#. Limit repeated log messages
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:110
msgid "Limit repeated log messages"
-msgstr ""
+msgstr "限制重复性的日志消息"
#. Write status to file every n seconds
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:111
msgid "Write status to file every n seconds"
-msgstr ""
+msgstr "每n秒后写状态值至文件"
#. Status file format version
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:112
msgid "Status file format version"
-msgstr ""
+msgstr "显式文件格式版本的状态"
#. Disable options consistency check
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:113
msgid "Disable options consistency check"
-msgstr ""
+msgstr "禁止选项一致性检查"
#. Special stress testing mode
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:114
msgid "Special stress testing mode"
-msgstr ""
+msgstr "特殊的压力测试模式"
#. Use fast LZO compression
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:115
msgid "Use fast LZO compression"
-msgstr ""
+msgstr "利用快速的LZO压缩"
#. Don't use adaptive lzo compression
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:116
msgid "Don't use adaptive lzo compression"
-msgstr ""
+msgstr "不用自适应的lzo压缩"
#. Enable management interface on <em>IP</em> <em>port</em>
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:117
msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
+msgstr "允许<em>IP</em> <em>端口</em>的接口管理"
#. Management interface will connect as a TCP client
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:118
msgid "Management interface will connect as a TCP client"
-msgstr ""
+msgstr "接口管理将以TCP客户端的方式连接"
#. Query management channel for private key
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:119
msgid "Query management channel for private key"
-msgstr ""
+msgstr "为私人密钥查询管理通道"
#. Start OpenVPN in a hibernating state
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:120
msgid "Start OpenVPN in a hibernating state"
-msgstr ""
+msgstr "以休眠的状态打开OpenVPN"
#. Issue SIGUSR1 on management disconnect
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:121
msgid "Issue SIGUSR1 on management disconnect"
-msgstr ""
+msgstr "当管理断开时发送SIGUSR1信号"
#. Forget passwords on management disconnect
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:122
msgid "Forget passwords on management disconnect"
-msgstr ""
+msgstr "当管理断开时清除密码"
#. Number of lines for log file history
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:123
msgid "Number of lines for log file history"
-msgstr ""
+msgstr "历史日志文件的行数"
#. Load plug-in module
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:124
msgid "Load plug-in module"
-msgstr ""
+msgstr "加载插件"
#. Configure server mode
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:125
msgid "Configure server mode"
-msgstr ""
+msgstr "配置服务器模式"
#. Configure server bridge
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:126
msgid "Configure server bridge"
-msgstr ""
+msgstr "配置服务器桥接"
#. Push options to peer
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:127
msgid "Push options to peer"
-msgstr ""
+msgstr "主动向端点发送选项"
#. Don't inherit global push options
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:128
msgid "Don't inherit global push options"
-msgstr ""
+msgstr "不继承全局主动发送选项"
#. Set aside a pool of subnets
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:129
msgid "Set aside a pool of subnets"
-msgstr ""
+msgstr "设置为拒绝子网线程池模式"
#. Use individual addresses rather than /30 subnets
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:130
msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
+msgstr "利用个人地址代替/30 子网"
#. Persist/unpersist ifconfig-pool
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:131
msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
+msgstr "持久/非持久ifconfig池"
#. Push an ifconfig option to remote
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:132
msgid "Push an ifconfig option to remote"
-msgstr ""
+msgstr "主动向远程发送ifconfig选项"
#. Route subnet to client
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:133
msgid "Route subnet to client"
-msgstr ""
+msgstr "路由子网至客户端"
#. Client is disabled
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:134
msgid "Client is disabled"
-msgstr ""
+msgstr "客户端已被禁止"
#. Don't require client certificate
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:135
msgid "Don't require client certificate"
-msgstr ""
+msgstr "不需要客户的证书"
#. Use username as common name
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:136
msgid "Use username as common name"
-msgstr ""
+msgstr "把用户名作为通用名称"
#. Script to verify interactive authentication
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:137
msgid "Script to verify interactive authentication"
-msgstr ""
+msgstr "以脚本的方式进行交互式的身份验证"
#. Allow client-to-client traffic
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:138
msgid "Allow client-to-client traffic"
-msgstr ""
+msgstr "允许客户端到客户端的通信"
#. Allow multiple clients with same certificate
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:139
msgid "Allow multiple clients with same certificate"
-msgstr ""
+msgstr "允许多用户共用同一证书"
#. Run script cmd on client connection
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:140
msgid "Run script cmd on client connection"
-msgstr ""
+msgstr "当客户端连接时在命令行下允许脚本"
#. Run script cmd on client disconnection
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:141
msgid "Run script cmd on client disconnection"
-msgstr ""
+msgstr "当客户端断开时在命令行下允许脚本"
#. Directory for custom client config files
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:142
msgid "Directory for custom client config files"
-msgstr ""
+msgstr "自定义客户端配置文件的目录"
#. Refuse connection if no custom client config
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:143
msgid "Refuse connection if no custom client config"
-msgstr ""
+msgstr "拒接没有自定义客户端配置的连接"
#. Temporary directory for client-connect return file
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:144
msgid "Temporary directory for client-connect return file"
-msgstr ""
+msgstr "客户端连接返回文件的临时目录"
#. Set size of real and virtual address hash tables
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:145
msgid "Set size of real and virtual address hash tables"
-msgstr ""
+msgstr "设置实际和虚拟地址的哈希表大小"
#. Number of allocated broadcast buffers
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:146
msgid "Number of allocated broadcast buffers"
-msgstr ""
+msgstr "已分配的广播缓冲区数量"
#. Maximum number of queued TCP output packets
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:147
msgid "Maximum number of queued TCP output packets"
-msgstr ""
+msgstr "TCP队列中输出包的最大数量"
#. Script to validate client virtual addresses
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:148
msgid "Script to validate client virtual addresses"
-msgstr ""
+msgstr "以脚本的方式验证客户端虚拟地址"
#. Allowed maximum of new connections
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:149
msgid "Allowed maximum of new connections"
-msgstr ""
+msgstr "允许的最大连接数"
#. Allowed maximum of connected clients
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:150
msgid "Allowed maximum of connected clients"
-msgstr ""
+msgstr "允许最大的已客户端连接数"
#. Allowed maximum of internal
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:151
msgid "Allowed maximum of internal"
-msgstr ""
+msgstr "Allowed maximum of internal"
#. Proxy incoming HTTPS sessions
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:152
msgid "Proxy incoming HTTPS sessions"
-msgstr ""
+msgstr "在代理中引入HTTPs会话"
#. Configure client mode
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:153
msgid "Configure client mode"
-msgstr ""
+msgstr "配置客户端模式"
#. Authenticate using username/password
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:154
msgid "Authenticate using username/password"
-msgstr ""
+msgstr "以用户名/密码的方式进行验证"
#. Accept options pushed from server
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:155
msgid "Accept options pushed from server"
-msgstr ""
+msgstr "接受从服务器发送过来的选项"
#. Handling of authentication failures
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:156
msgid "Handling of authentication failures"
-msgstr ""
+msgstr "处理验证失败"
#. Send notification to peer on disconnect
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:157
msgid "Send notification to peer on disconnect"
-msgstr ""
+msgstr "断开连接时向客户端发送通知"
#. Enable Static Key encryption mode (non-TLS)
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:158
msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
+msgstr "允许静态密码加密模式(non-TLS)"
#. HMAC authentication for packets
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:159
msgid "HMAC authentication for packets"
-msgstr ""
+msgstr "利用HMAC水印算法校验数据包"
#. Encryption cipher for packets
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:160
msgid "Encryption cipher for packets"
-msgstr ""
+msgstr "加密数据包"
#. Size of cipher key
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:161
msgid "Size of cipher key"
-msgstr ""
+msgstr "密钥大小"
#. Enable OpenSSL hardware crypto engines
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:162
msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
+msgstr "打开OpenSSL硬件加密引擎"
#. Disable replay protection
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:163
msgid "Disable replay protection"
-msgstr ""
+msgstr "关闭重播保护"
#. Silence the output of replay warnings
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:164
msgid "Silence the output of replay warnings"
-msgstr ""
+msgstr "以静音的方式发出重播警告"
#. Replay protection sliding window size
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:165
msgid "Replay protection sliding window size"
-msgstr ""
+msgstr "重播保护的滑动窗口大小"
#. Disable cipher initialisation vector
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:166
msgid "Disable cipher initialisation vector"
-msgstr ""
+msgstr "关闭加密的初始化向量"
#. Persist replay-protection state
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:167
msgid "Persist replay-protection state"
-msgstr ""
+msgstr "保存重播保护的状态"
#. Run a self-test of crypto features
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:168
msgid "Run a self-test of crypto features"
-msgstr ""
+msgstr "运行加密特征自我检查"
#. Enable TLS and assume server role
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:169
msgid "Enable TLS and assume server role"
-msgstr ""
+msgstr "允许TLS并伪装为服务器"
#. Enable TLS and assume client role
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:170
msgid "Enable TLS and assume client role"
-msgstr ""
+msgstr "允许TLS并伪装为客户端"
#. Data channel key exchange method
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:171
msgid "Data channel key exchange method"
-msgstr ""
+msgstr "数据通道密钥交换方式"
#. Certificate authority
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:172
msgid "Certificate authority"
-msgstr ""
+msgstr "认证授权"
#. Directory of trusted certificates (CAs and CRLs)
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:173
msgid "Directory of trusted certificates (CAs and CRLs)"
-msgstr ""
+msgstr "信任证书的目录(CAs and CRLs)"
#. Diffie Hellman parameters
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:174
msgid "Diffie Hellman parameters"
-msgstr ""
+msgstr "Diffie Hellman parameters"
#. Local certificate
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:175
msgid "Local certificate"
-msgstr ""
+msgstr "本地证书"
#. Local private key
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:176
msgid "Local private key"
-msgstr ""
+msgstr "本地私人密钥"
#. PKCS#12 file containing keys
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:177
msgid "PKCS#12 file containing keys"
-msgstr ""
+msgstr "PKCS#12文件包含的密钥"
#. TLS cipher
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:178
msgid "TLS cipher"
-msgstr ""
+msgstr "TLS加密"
#. Retransmit timeout on TLS control channel
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:179
msgid "Retransmit timeout on TLS control channel"
-msgstr ""
+msgstr "TLS控制通道超时后重新发送"
#. Renegotiate data chan. key after bytes
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:180
msgid "Renegotiate data chan. key after bytes"
-msgstr ""
+msgstr "传输若干字节后重新验证数据通道密钥"
#. Renegotiate data chan. key after packets
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:181
msgid "Renegotiate data chan. key after packets"
-msgstr ""
+msgstr "传输若干数据包后重新验证数据通道密钥"
#. Renegotiate data chan. key after seconds
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:182
msgid "Renegotiate data chan. key after seconds"
-msgstr ""
+msgstr "传输若干秒后重新验证数据通道密钥"
#. Timeframe for key exchange
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:183
msgid "Timeframe for key exchange"
-msgstr ""
+msgstr "密钥交换时间表"
#. Key transition window
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:184
msgid "Key transition window"
-msgstr ""
+msgstr "密钥传输滑动窗口"
#. Allow only one session
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:185
msgid "Allow only one session"
-msgstr ""
+msgstr "只允许一个会话"
#. Exit on TLS negotiation failure
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:186
msgid "Exit on TLS negotiation failure"
-msgstr ""
+msgstr "TLS验证失败后退出"
#. Additional authentication over TLS
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:187
msgid "Additional authentication over TLS"
-msgstr ""
+msgstr "TLS以外的验证"
#. Get PEM password from controlling tty before we daemonize
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:188
msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
+msgstr "后台运行前从控制的tty中获取PEM密码"
#. Don't cache --askpass or --auth-user-pass passwords
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:189
msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
+msgstr "不缓存--askpass 或--auth-user-pass passwords"
#. Check peer certificate against a CRL
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:190
msgid "Check peer certificate against a CRL"
-msgstr ""
+msgstr "验证客户端证书以确保其是否过期"
#. Shell command to verify X509 name
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:191
msgid "Shell command to verify X509 name"
-msgstr ""
+msgstr "运行shell命令以验证X509名称"
#. Only accept connections from given X509 name
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:192
msgid "Only accept connections from given X509 name"
-msgstr ""
+msgstr "只接收已给定的X509名称的连接"
#. Require explicit designation on certificate
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:193
msgid "Require explicit designation on certificate"
-msgstr ""
+msgstr "证书需要显式指定"
#. Require explicit key usage on certificate
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:194
msgid "Require explicit key usage on certificate"
-msgstr ""
+msgstr "证书需要明确的密钥"
#. Require extended explicit key usage on certificate
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:195
msgid "Require extended explicit key usage on certificate"
-msgstr ""
+msgstr "证书需要明确的扩展密钥"
#. Require normal and extended key usage on certificate
#: applications/luci-openvpn/luasrc/i18n/openvpn.en.lua:196
msgid "Require normal and extended key usage on certificate"
-msgstr ""
+msgstr "证书需要明确的正常密钥盒扩展密钥"
projects / project / luci.git / commitdiff