f941718446dc64694cab07f02313b0f5f9d0af35
1 # Copyright (C) 2014 OpenWrt.org
6 # 'kernel' partition or UBI volume on NAND contains the kernel
7 CI_KERNPART
="${CI_KERNPART:-kernel}"
9 # 'ubi' partition on NAND contains UBI
10 CI_UBIPART
="${CI_UBIPART:-ubi}"
12 # 'rootfs' UBI volume on NAND contains the rootfs
13 CI_ROOTPART
="${CI_ROOTPART:-rootfs}"
17 local dev
="/dev/$(basename $dir)"
19 [ -e "$dev" ] && return 0
21 local devid
="$(cat $dir/dev)"
22 local major
="${devid%%:*}"
23 local minor
="${devid##*:}"
24 mknod
"$dev" c
$major $minor
28 local ubidevdir ubivoldir
29 ubidevdir
="/sys/devices/virtual/ubi/$1"
30 [ ! -d "$ubidevdir" ] && return 1
31 for ubivoldir
in $ubidevdir/${1}_
*; do
32 [ ! -d "$ubivoldir" ] && continue
33 if [ "$( cat $ubivoldir/name )" = "$2" ]; then
35 ubi_mknod
"$ubivoldir"
42 local ubidevdir ubidev mtdnum
43 mtdnum
="$( find_mtd_index $1 )"
44 [ ! "$mtdnum" ] && return 1
45 for ubidevdir
in /sys
/devices
/virtual
/ubi
/ubi
*; do
46 [ ! -d "$ubidevdir" ] && continue
47 cmtdnum
="$( cat $ubidevdir/mtd_num )"
48 [ ! "$mtdnum" ] && continue
49 if [ "$mtdnum" = "$cmtdnum" ]; then
50 ubidev
=$
( basename $ubidevdir )
51 ubi_mknod
"$ubidevdir"
58 nand_get_magic_long
() {
59 dd if="$1" skip
=$2 bs
=4 count
=1 2>/dev
/null |
hexdump -v -n 4 -e '1/1 "%02x"'
62 get_magic_long_tar
() {
63 ( tar xf
$1 $2 -O |
dd bs
=4 count
=1 |
hexdump -v -n 4 -e '1/1 "%02x"') 2> /dev
/null
92 identify_magic $
(nand_get_magic_long
"$1" "${2:-0}")
96 identify_magic $
(get_magic_long_tar
"$1" "$2")
99 nand_restore_config
() {
101 local ubidev
=$
( nand_find_ubi
"$CI_UBIPART" )
102 local ubivol
="$( nand_find_volume $ubidev rootfs_data )"
104 ubivol
="$( nand_find_volume $ubidev "$CI_ROOTPART" )"
106 if ! mount
-t ubifs
/dev
/$ubivol /tmp
/new_root
; then
107 echo "mounting ubifs $ubivol failed"
111 mv "$1" "/tmp/new_root/$BACKUP_FILE"
117 nand_remove_ubiblock
() {
119 local ubiblk
=ubiblock
${ubivol:3}
120 if [ -e /dev
/$ubiblk ]; then
121 echo "removing $ubiblk"
122 if ! ubiblock
-r /dev
/$ubivol; then
123 echo "cannot remove $ubiblk"
129 nand_upgrade_prepare_ubi
() {
130 local rootfs_length
="$1"
131 local rootfs_type
="$2"
132 local rootfs_data_max
="$(fw_printenv -n rootfs_data_max 2>/dev/null)"
133 [ -n "$rootfs_data_max" ] && rootfs_data_max
=$
((rootfs_data_max
))
135 local kernel_length
="$3"
136 local has_env
="${4:-0}"
138 [ -n "$rootfs_length" -o -n "$kernel_length" ] ||
return 1
140 local mtdnum
="$( find_mtd_index "$CI_UBIPART" )"
141 if [ ! "$mtdnum" ]; then
142 echo "cannot find ubi mtd partition $CI_UBIPART"
146 local ubidev
="$( nand_find_ubi "$CI_UBIPART" )"
147 if [ ! "$ubidev" ]; then
148 ubiattach
-m "$mtdnum"
150 ubidev
="$( nand_find_ubi "$CI_UBIPART" )"
152 if [ ! "$ubidev" ]; then
153 ubiformat
/dev
/mtd
$mtdnum -y
154 ubiattach
-m "$mtdnum"
156 ubidev
="$( nand_find_ubi "$CI_UBIPART" )"
158 if [ ! "$ubidev" ]; then
159 echo "cannot attach ubi mtd partition $CI_UBIPART"
163 if [ "$has_env" -gt 0 ]; then
164 ubimkvol
/dev
/$ubidev -n 0 -N ubootenv
-s 1MiB
165 ubimkvol
/dev
/$ubidev -n 1 -N ubootenv2
-s 1MiB
170 local kern_ubivol
="$( nand_find_volume $ubidev "$CI_KERNPART" )"
171 local root_ubivol
="$( nand_find_volume $ubidev "$CI_ROOTPART" )"
172 local data_ubivol
="$( nand_find_volume $ubidev rootfs_data )"
173 [ "$root_ubivol" = "$kern_ubivol" ] && root_ubivol
=
176 [ "$kern_ubivol" ] && { nand_remove_ubiblock
$kern_ubivol ||
return 1; }
177 [ "$root_ubivol" ] && { nand_remove_ubiblock
$root_ubivol ||
return 1; }
178 [ "$data_ubivol" ] && { nand_remove_ubiblock
$data_ubivol ||
return 1; }
181 [ "$kern_ubivol" ] && ubirmvol
/dev
/$ubidev -N "$CI_KERNPART" ||
:
182 [ "$root_ubivol" ] && ubirmvol
/dev
/$ubidev -N "$CI_ROOTPART" ||
:
183 [ "$data_ubivol" ] && ubirmvol
/dev
/$ubidev -N rootfs_data ||
:
186 if [ -n "$kernel_length" ]; then
187 if ! ubimkvol
/dev
/$ubidev -N "$CI_KERNPART" -s $kernel_length; then
188 echo "cannot create kernel volume"
194 if [ -n "$rootfs_length" ]; then
195 local rootfs_size_param
196 if [ "$rootfs_type" = "ubifs" ]; then
197 rootfs_size_param
="-m"
199 rootfs_size_param
="-s $rootfs_length"
201 if ! ubimkvol
/dev
/$ubidev -N "$CI_ROOTPART" $rootfs_size_param; then
202 echo "cannot create rootfs volume"
207 # create rootfs_data vol for non-ubifs rootfs
208 if [ "$rootfs_type" != "ubifs" ]; then
209 local rootfs_data_size_param
="-m"
210 if [ -n "$rootfs_data_max" ]; then
211 rootfs_data_size_param
="-s $rootfs_data_max"
213 if ! ubimkvol
/dev
/$ubidev -N rootfs_data
$rootfs_data_size_param; then
214 if ! ubimkvol
/dev
/$ubidev -N rootfs_data
-m; then
215 echo "cannot initialize rootfs_data volume"
224 nand_do_upgrade_success
() {
225 local conf_tar
="/tmp/sysupgrade.tgz"
228 [ -f "$conf_tar" ] && nand_restore_config
"$conf_tar"
229 echo "sysupgrade successful"
234 # Flash the UBI image to MTD partition
235 nand_upgrade_ubinized
() {
237 local mtdnum
="$(find_mtd_index "$CI_UBIPART")"
239 if [ ! "$mtdnum" ]; then
240 echo "cannot find mtd device $CI_UBIPART"
245 local mtddev
="/dev/mtd${mtdnum}"
246 ubidetach
-p "${mtddev}" ||
:
248 ubiformat
"${mtddev}" -y -f "${ubi_file}"
249 ubiattach
-p "${mtddev}"
251 nand_do_upgrade_success
254 # Write the UBIFS image to UBI volume
255 nand_upgrade_ubifs
() {
256 local rootfs_length
=$
( (cat $1 |
wc -c) 2> /dev
/null
)
258 nand_upgrade_prepare_ubi
"$rootfs_length" "ubifs" "" ""
260 local ubidev
="$( nand_find_ubi "$CI_UBIPART" )"
261 local root_ubivol
="$(nand_find_volume $ubidev "$CI_ROOTPART")"
262 ubiupdatevol
/dev
/$root_ubivol -s $rootfs_length $1
264 nand_do_upgrade_success
269 local fit_length
="$(wc -c < "$fit_file")"
271 nand_upgrade_prepare_ubi
"" "" "$fit_length" "1"
273 local fit_ubidev
="$(nand_find_ubi "$CI_UBIPART")"
274 local fit_ubivol
="$(nand_find_volume $fit_ubidev "$CI_KERNPART")"
275 ubiupdatevol
/dev
/$fit_ubivol -s $fit_length $fit_file
277 nand_do_upgrade_success
283 local board_dir
="$(tar tf "$tar_file" | grep -m 1 '^sysupgrade-.*/$')"
284 board_dir
="${board_dir%/}"
286 local kernel_mtd kernel_length
287 if [ "$CI_KERNPART" != "none" ]; then
288 kernel_mtd
="$(find_mtd_index "$CI_KERNPART")"
289 kernel_length
=$
( (tar xf
"$tar_file" "$board_dir/kernel" -O |
wc -c) 2> /dev
/null
)
290 [ "$kernel_length" = 0 ] && kernel_length
=
292 local rootfs_length
=$
( (tar xf
"$tar_file" "$board_dir/root" -O |
wc -c) 2> /dev
/null
)
293 [ "$rootfs_length" = 0 ] && rootfs_length
=
295 [ "$rootfs_length" ] && rootfs_type
="$(identify_tar "$tar_file" "$board_dir/root
")"
297 local ubi_kernel_length
298 if [ "$kernel_length" ]; then
299 if [ "$kernel_mtd" ]; then
300 mtd erase
"$CI_KERNPART"
302 ubi_kernel_length
="$kernel_length"
306 nand_upgrade_prepare_ubi
"$rootfs_length" "$rootfs_type" "$ubi_kernel_length" "$has_env"
308 local ubidev
="$( nand_find_ubi "$CI_UBIPART" )"
309 if [ "$rootfs_length" ]; then
310 local root_ubivol
="$( nand_find_volume $ubidev "$CI_ROOTPART" )"
311 tar xf
"$tar_file" "$board_dir/root" -O | \
312 ubiupdatevol
/dev
/$root_ubivol -s $rootfs_length -
314 if [ "$kernel_length" ]; then
315 if [ "$kernel_mtd" ]; then
316 tar xf
"$tar_file" "$board_dir/kernel" -O | \
317 mtd
-n write - "$CI_KERNPART"
319 local kern_ubivol
="$( nand_find_volume $ubidev "$CI_KERNPART" )"
320 tar xf
"$tar_file" "$board_dir/kernel" -O | \
321 ubiupdatevol
/dev
/$kern_ubivol -s $kernel_length -
325 nand_do_upgrade_success
328 # Recognize type of passed file and start the upgrade process
330 local file_type
=$
(identify
$1)
332 [ ! "$(find_mtd_index "$CI_UBIPART")" ] && CI_UBIPART
=rootfs
335 "fit") nand_upgrade_fit
$1;;
336 "ubi") nand_upgrade_ubinized
$1;;
337 "ubifs") nand_upgrade_ubifs
$1;;
338 *) nand_upgrade_tar
$1;;
342 # Check if passed file is a valid one for NAND sysupgrade. Currently it accepts
344 # 1) UBI - should contain an ubinized image, header is checked for the proper
346 # 2) UBIFS - should contain UBIFS partition that will replace "rootfs" volume,
347 # header is checked for the proper MAGIC
348 # 3) TAR - archive has to include "sysupgrade-BOARD" directory with a non-empty
349 # "CONTROL" file (at this point its content isn't verified)
351 # You usually want to call this function in platform_check_image.
353 # $(1): board name, used in case of passing TAR file
354 # $(2): file to be checked
355 nand_do_platform_check
() {
356 local board_name
="$1"
358 local control_length
=$
( (tar xf
$tar_file sysupgrade-
$board_name/CONTROL
-O |
wc -c) 2> /dev
/null
)
359 local file_type
="$(identify $2)"
361 [ "$control_length" = 0 -a "$file_type" != "ubi" -a "$file_type" != "ubifs" -a "$file_type" != "fit" ] && {
362 echo "Invalid sysupgrade file."