4 .
/lib
/functions
/system.sh
7 export MTD_CONFIG_ARGS
=""
12 export SAVE_PARTITIONS
=1
14 export CONF_BACKUP_LIST
=0
25 -i) export INTERACTIVE
=1;;
26 -v) export VERBOSE
="$(($VERBOSE + 1))";;
27 -q) export VERBOSE
="$(($VERBOSE - 1))";;
28 -n) export SAVE_CONFIG
=0;;
29 -c) export SAVE_OVERLAY
=1;;
30 -p) export SAVE_PARTITIONS
=0;;
31 -b|
--create-backup) export CONF_BACKUP
="$2" NEED_IMAGE
=1; shift;;
32 -r|
--restore-backup) export CONF_RESTORE
="$2" NEED_IMAGE
=1; shift;;
33 -l|
--list-backup) export CONF_BACKUP_LIST
=1; break;;
34 -f) export CONF_IMAGE
="$2"; shift;;
35 -F|
--force) export FORCE
=1;;
36 -T|
--test) export TEST
=1;;
37 -h|
--help) export HELP
=1; break;;
39 echo "Invalid option: $1"
47 export CONFFILES
=/tmp
/sysupgrade.conffiles
48 export CONF_TAR
=/tmp
/sysupgrade.tgz
52 [ -z "$IMAGE" -a -z "$NEED_IMAGE" -o $HELP -gt 0 ] && {
54 Usage: $0 [<upgrade-option>...] <image file or URL>
55 $0 [-q] [-i] <backup-command> <file>
58 -f <config> restore configuration from .tar.gz (file or url)
60 -c attempt to preserve all changed files in /etc/
61 -n do not save configuration over reflash
62 -p do not attempt to restore the partition table after flash.
64 Verify image and config .tar.gz but do not actually flash.
66 Flash image even if image checks fail, this is dangerous!
69 -h | --help display this help
72 -b | --create-backup <file>
73 create .tar.gz of files specified in sysupgrade.conf
74 then exit. Does not flash an image. If file is '-',
75 i.e. stdout, verbosity is set to 0 (i.e. quiet).
76 -r | --restore-backup <file>
77 restore a .tar.gz created with sysupgrade -b
78 then exit. Does not flash an image. If file is '-',
79 the archive is read from stdin.
81 list the files that would be backed up when calling
82 sysupgrade -b. Does not create a backup file.
88 [ -n "$IMAGE" -a -n "$NEED_IMAGE" ] && {
90 -b|--create-backup and -r|--restore-backup do not perform a firmware upgrade.
91 Do not specify both -b|-r and a firmware image.
96 # prevent messages from clobbering the tarball when using stdout
97 [ "$CONF_BACKUP" = "-" ] && export VERBOSE
=0
102 BEGIN { conffiles = 0 }
103 /^Conffiles:/ { conffiles = 1; next }
104 !/^ / { conffiles = 0; next }
105 conffiles == 1 { print }
106 ' /usr
/lib
/opkg
/status
109 list_changed_conffiles
() {
110 # Cannot handle spaces in filenames - but opkg cannot either...
111 list_conffiles |
while read file csum
; do
112 [ -r "$file" ] ||
continue
114 echo "${csum} ${file}" | sha256sum
-sc - ||
echo "$file"
118 add_uci_conffiles
() {
120 ( find $
(sed -ne '/^[[:space:]]*$/d; /^#/d; p' \
121 /etc
/sysupgrade.conf
/lib
/upgrade
/keep.d
/* 2>/dev
/null
) \
122 -type f
-o -type l
2>/dev
/null
;
123 list_changed_conffiles
) |
sort -u > "$file"
129 find /overlay
/upper
/etc
/ -type f
-o -type l |
sed \
130 -e 's,^/overlay\/upper/,/,' \
131 -e '\,/META_[a-zA-Z0-9]*$,d' \
132 -e '\,/functions.sh$,d' \
133 -e '\,/[^/]*-opkg$,d' \
139 sysupgrade_image_check
="fwtool_check_image platform_check_image"
140 sysupgrade_pre_upgrade
=""
142 if [ $SAVE_OVERLAY = 1 ]; then
143 [ ! -d /overlay
/upper
/etc
] && {
144 echo "Cannot find '/overlay/upper/etc', required for '-c'"
147 sysupgrade_init_conffiles
="add_overlayfiles"
149 sysupgrade_init_conffiles
="add_uci_conffiles"
154 do_save_conffiles
() {
155 local conf_tar
="${1:-$CONF_TAR}"
157 [ -z "$(rootfs_type)" ] && {
158 echo "Cannot save config while running from ramdisk."
159 ask_bool
0 "Abort" && exit
163 run_hooks
"$CONFFILES" $sysupgrade_init_conffiles
164 ask_bool
0 "Edit config file list" && vi
"$CONFFILES"
166 v
"Saving config files..."
167 [ "$VERBOSE" -gt 1 ] && TAR_V
="v" || TAR_V
=""
168 tar c
${TAR_V}zf
"$conf_tar" -T "$CONFFILES" 2>/dev
/null
169 if [ "$?" -ne 0 ]; then
170 echo "Failed to create the configuration backup."
178 if [ $CONF_BACKUP_LIST -eq 1 ]; then
179 run_hooks
"$CONFFILES" $sysupgrade_init_conffiles
185 if [ -n "$CONF_BACKUP" ]; then
186 do_save_conffiles
"$CONF_BACKUP"
190 if [ -n "$CONF_RESTORE" ]; then
191 if [ "$CONF_RESTORE" != "-" ] && [ ! -f "$CONF_RESTORE" ]; then
192 echo "Backup archive '$CONF_RESTORE' not found."
196 [ "$VERBOSE" -gt 1 ] && TAR_V
="v" || TAR_V
=""
197 tar -C / -x${TAR_V}zf
"$CONF_RESTORE"
201 type platform_check_image
>/dev
/null
2>/dev
/null ||
{
202 echo "Firmware upgrade is not implemented for this platform."
208 wget
-O/tmp
/sysupgrade.img
"$IMAGE"
209 IMAGE
=/tmp
/sysupgrade.img
213 IMAGE
="$(readlink -f "$IMAGE")"
217 echo "Image file not found."
222 v
"Image not in /tmp, copying..."
223 cp -f "$IMAGE" /tmp
/sysupgrade.img
224 IMAGE
=/tmp
/sysupgrade.img
231 for check
in $sysupgrade_image_check; do
232 ( $check "$IMAGE" ) ||
{
233 if [ $FORCE -eq 1 ]; then
234 echo "Image check '$check' failed but --force given - will update anyway!"
237 echo "Image check '$check' failed."
243 if [ -n "$CONF_IMAGE" ]; then
244 case "$(get_magic_word $CONF_IMAGE cat)" in
248 echo "Invalid config file. Please use only .tar.gz files"
252 get_image
"$CONF_IMAGE" "cat" > "$CONF_TAR"
254 elif ask_bool
$SAVE_CONFIG "Keep config files over reflash"; then
255 [ $TEST -eq 1 ] || do_save_conffiles
258 [ $TEST -eq 1 ] ||
rm -f "$CONF_TAR"
262 if [ $TEST -eq 1 ]; then
266 if [ $SAVE_PARTITIONS -eq 0 ]; then
267 touch /tmp
/sysupgrade.always.overwrite.bootdisk.partmap
269 rm -f /tmp
/sysupgrade.always.overwrite.bootdisk.partmap
272 run_hooks
"" $sysupgrade_pre_upgrade
274 install_bin
/sbin
/upgraded
275 v
"Commencing upgrade. Closing all shell sessions."
277 COMMAND
='. /lib/functions.sh; include /lib/upgrade; do_upgrade_stage2'
279 if [ -n "$FAILSAFE" ]; then
280 printf '%s\x00%s\x00%s' "$RAM_ROOT" "$IMAGE" "$COMMAND" >/tmp
/sysupgrade
281 lock
-u /tmp
/.failsafe
283 ubus call system sysupgrade
"{
284 \"prefix\": $(json_string "$RAM_ROOT"),
285 \"path\": $(json_string "$IMAGE"),
286 \"command\": $(json_string "$COMMAND")