3 [ -n "$INCLUDE_ONLY" ] ||
{
9 proto_qmi_init_config
() {
12 proto_config_add_string
"device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_int delay
19 proto_config_add_string modes
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_boolean dhcpv6
23 proto_config_add_boolean autoconnect
24 proto_config_add_int plmn
25 proto_config_add_int timeout
26 proto_config_add_defaults
31 local dataformat connstat
32 local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn timeout
$PROTO_DEFAULT_OPTIONS
33 local ip4table ip6table
34 local cid_4 pdh_4 cid_6 pdh_6
35 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
36 json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn ip4table ip6table timeout
$PROTO_DEFAULT_OPTIONS
38 [ "$timeout" = "" ] && timeout
="10"
40 [ "$metric" = "" ] && metric
="0"
42 [ -n "$ctl_device" ] && device
=$ctl_device
45 echo "No control device specified"
46 proto_notify_error
"$interface" NO_DEVICE
47 proto_set_available
"$interface" 0
51 [ -n "$delay" ] && sleep "$delay"
53 device
="$(readlink -f $device)"
55 echo "The specified control device does not exist"
56 proto_notify_error
"$interface" NO_DEVICE
57 proto_set_available
"$interface" 0
61 devname
="$(basename "$device")"
62 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
63 ifname
="$( ls "$devpath"/net )"
65 echo "The interface could not be found."
66 proto_notify_error
"$interface" NO_IFACE
67 proto_set_available
"$interface" 0
71 echo "Waiting for SIM initialization"
72 local uninitialized_timeout
=0
73 while uqmi
-s -d "$device" --get-pin-status |
grep '"UIM uninitialized"' > /dev
/null
; do
74 [ -e "$device" ] ||
return 1
75 if [ "$uninitialized_timeout" -lt "$timeout" ]; then
76 let uninitialized_timeout
++
79 echo "SIM not initialized"
80 proto_notify_error
"$interface" SIM_NOT_INITIALIZED
81 proto_block_restart
"$interface"
86 if uqmi
-s -d "$device" --get-pin-status |
grep '"Not supported"\|"Invalid QMI command"' > /dev
/null
; then
87 [ -n "$pincode" ] && {
88 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null ||
{
89 echo "Unable to verify PIN"
90 proto_notify_error
"$interface" PIN_FAILED
91 proto_block_restart
"$interface"
96 .
/usr
/share
/libubox
/jshn.sh
97 json_load
"$(uqmi -s -d "$device" --get-pin-status)"
98 json_get_var pin1_status pin1_status
99 json_get_var pin1_verify_tries pin1_verify_tries
101 case "$pin1_status" in
103 echo "PIN verification is disabled"
106 echo "SIM locked PUK required"
107 proto_notify_error
"$interface" PUK_NEEDED
108 proto_block_restart
"$interface"
112 [ "$pin1_verify_tries" -lt "3" ] && {
113 echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
114 proto_notify_error
"$interface" PIN_TRIES_BELOW_LIMIT
115 proto_block_restart
"$interface"
118 if [ -n "$pincode" ]; then
119 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null
2>&1 || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null
2>&1 ||
{
120 echo "Unable to verify PIN"
121 proto_notify_error
"$interface" PIN_FAILED
122 proto_block_restart
"$interface"
126 echo "PIN not specified but required"
127 proto_notify_error
"$interface" PIN_NOT_SPECIFIED
128 proto_block_restart
"$interface"
133 echo "PIN already verified"
136 echo "PIN status failed ($pin1_status)"
137 proto_notify_error
"$interface" PIN_STATUS_FAILED
138 proto_block_restart
"$interface"
146 if [ "$plmn" = 0 ]; then
149 echo "Setting PLMN to auto"
153 echo "Setting PLMN to $plmn"
155 uqmi
-s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev
/null
2>&1 ||
{
156 echo "Unable to set PLMN"
157 proto_notify_error
"$interface" PLMN_FAILED
158 proto_block_restart
"$interface"
163 # Cleanup current state if any
164 uqmi
-s -d "$device" --stop-network 0xffffffff --autoconnect > /dev
/null
2>&1
167 uqmi
-s -d "$device" --set-data-format 802.3 > /dev
/null
2>&1
168 uqmi
-s -d "$device" --wda-set-data-format 802.3 > /dev
/null
2>&1
169 dataformat
="$(uqmi -s -d "$device" --wda-get-data-format)"
171 if [ "$dataformat" = '"raw-ip"' ]; then
173 [ -f /sys
/class
/net
/$ifname/qmi
/raw_ip
] ||
{
174 echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
178 echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
179 echo "Y" > /sys
/class
/net
/$ifname/qmi
/raw_ip
182 uqmi
-s -d "$device" --sync > /dev
/null
2>&1
184 echo "Waiting for network registration"
185 local registration_timeout
=0
186 while uqmi
-s -d "$device" --get-serving-system |
grep '"searching"' > /dev
/null
; do
187 [ -e "$device" ] ||
return 1
188 if [ "$registration_timeout" -lt "$timeout" ]; then
189 let registration_timeout
++
192 echo "Network registration failed"
193 proto_notify_error
"$interface" NETWORK_REGISTRATION_FAILED
194 proto_block_restart
"$interface"
199 [ -n "$modes" ] && uqmi
-s -d "$device" --set-network-modes "$modes" > /dev
/null
2>&1
201 echo "Starting network $interface"
203 pdptype
=$
(echo "$pdptype" |
awk '{print tolower($0)}')
204 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype
="ip"
206 if [ "$pdptype" = "ip" ]; then
207 [ -z "$autoconnect" ] && autoconnect
=1
208 [ "$autoconnect" = 0 ] && autoconnect
=""
210 [ "$autoconnect" = 1 ] || autoconnect
=""
213 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
214 cid_4
=$
(uqmi
-s -d "$device" --get-client-id wds
)
215 if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev
/null
; then
216 echo "Unable to obtain client ID"
217 proto_notify_error
"$interface" NO_CID
221 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --set-ip-family ipv4
> /dev
/null
2>&1
223 pdh_4
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" \
226 ${profile:+--profile $profile} \
227 ${auth:+--auth-type $auth} \
228 ${username:+--username $username} \
229 ${password:+--password $password} \
230 ${autoconnect:+--autoconnect})
232 # pdh_4 is a numeric value on success
233 if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev
/null
; then
234 echo "Unable to connect IPv4"
235 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
236 proto_notify_error
"$interface" CALL_FAILED
240 # Check data connection state
241 connstat
=$
(uqmi
-s -d "$device" --get-data-status)
242 [ "$connstat" == '"connected"' ] ||
{
244 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
245 proto_notify_error
"$interface" CALL_FAILED
250 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
251 cid_6
=$
(uqmi
-s -d "$device" --get-client-id wds
)
252 if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev
/null
; then
253 echo "Unable to obtain client ID"
254 proto_notify_error
"$interface" NO_CID
258 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --set-ip-family ipv6
> /dev
/null
2>&1
260 pdh_6
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" \
263 ${profile:+--profile $profile} \
264 ${auth:+--auth-type $auth} \
265 ${username:+--username $username} \
266 ${password:+--password $password} \
267 ${autoconnect:+--autoconnect})
269 # pdh_6 is a numeric value on success
270 if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev
/null
; then
271 echo "Unable to connect IPv6"
272 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
273 proto_notify_error
"$interface" CALL_FAILED
277 # Check data connection state
278 connstat
=$
(uqmi
-s -d "$device" --get-data-status)
279 [ "$connstat" == '"connected"' ] ||
{
281 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
282 proto_notify_error
"$interface" CALL_FAILED
287 echo "Setting up $ifname"
288 proto_init_update
"$ifname" 1
292 json_add_string
"cid_4" "$cid_4"
293 json_add_string
"pdh_4" "$pdh_4"
296 json_add_string
"cid_6" "$cid_6"
297 json_add_string
"pdh_6" "$pdh_6"
300 proto_send_update
"$interface"
302 local zone
="$(fw3 -q network "$interface" 2>/dev/null)"
305 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
306 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
309 json_get_var gateway_6 gateway
310 json_get_var dns1_6 dns1
311 json_get_var dns2_6 dns2
312 json_get_var ip_prefix_length ip-prefix-length
314 proto_init_update
"$ifname" 1
316 proto_add_ipv6_address
"$ip_6" "128"
317 proto_add_ipv6_prefix
"${ip_6}/${ip_prefix_length}"
318 proto_add_ipv6_route
"$gateway_6" "128"
319 [ "$defaultroute" = 0 ] || proto_add_ipv6_route
"::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
320 [ "$peerdns" = 0 ] ||
{
321 proto_add_dns_server
"$dns1_6"
322 proto_add_dns_server
"$dns2_6"
326 json_add_string zone
"$zone"
329 proto_send_update
"$interface"
332 json_add_string name
"${interface}_6"
333 json_add_string ifname
"@$interface"
334 json_add_string proto
"dhcpv6"
335 [ -n "$ip6table" ] && json_add_string ip6table
"$ip6table"
336 proto_add_dynamic_defaults
337 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
338 json_add_string extendprefix
1
339 [ -n "$zone" ] && json_add_string zone
"$zone"
341 ubus call network add_dynamic
"$(json_dump)"
347 json_add_string name
"${interface}_4"
348 json_add_string ifname
"@$interface"
349 json_add_string proto
"dhcp"
350 [ -n "$ip4table" ] && json_add_string ip4table
"$ip4table"
351 proto_add_dynamic_defaults
352 [ -n "$zone" ] && json_add_string zone
"$zone"
354 ubus call network add_dynamic
"$(json_dump)"
362 [ -n "$cid" ] ||
return
364 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
365 --stop-network 0xffffffff \
366 --autoconnect > /dev
/null
2>&1
369 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
370 --stop-network "$pdh" > /dev
/null
2>&1
373 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
374 --release-client-id wds
> /dev
/null
2>&1
377 proto_qmi_teardown
() {
380 local device cid_4 pdh_4 cid_6 pdh_6
383 [ -n "$ctl_device" ] && device
=$ctl_device
385 echo "Stopping network $interface"
387 json_load
"$(ubus call network.interface.$interface status)"
389 json_get_vars cid_4 pdh_4 cid_6 pdh_6
391 qmi_wds_stop
"$cid_4" "$pdh_4"
392 qmi_wds_stop
"$cid_6" "$pdh_6"
394 proto_init_update
"*" 0
395 proto_send_update
"$interface"
398 [ -n "$INCLUDE_ONLY" ] ||
{