2 * Device Tree Source for Netgear WNDAP620 and WNDAP660
4 * This file is licensed under the terms of the GNU General Public
5 * License version 2. This program is licensed "as is" without
6 * any warranty of any kind, whether express or implied.
9 #include "apm82181.dtsi"
15 led-failsafe = &failsafe;
16 led-running = &status;
17 led-upgrade = &status;
21 stdout-path = "/plb/opb/serial@ef600300";
40 /* 32 MiB SLC NAND Flash */
44 reg = <0x00000000 0x00100000>;
50 reg = <0x00100000 0x00010000>;
56 reg = <0x00110000 0x01ac0000>;
61 * The u-boot bootloader will look at this
62 * offset (0x110000) for an uImage binary.
65 reg = <0x00110000 0x003f0000>;
70 reg = <0x00500000 0x016d0000>;
75 * original vendor device-tree - do not use or
76 * overwrite. The original u-boot also supports
77 * the gzipped legacy monolithic/Multi-File Image
78 * format, which is a better choice.
80 label = "device-tree";
81 reg = <0x01bd0000 0x0010000>;
87 reg = <0x01be0000 0x0400000>;
93 reg = <0x01fe0000 0x20000 >;
119 #address-cells = <1>;
126 compatible = "gpio-keys";
129 label = "Reset Button";
130 gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
131 linux,code = <KEY_RESTART>;
132 interrupt-parent = <&UIC1>;
133 interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
134 debounce-interval = <60>;
139 compatible = "gpio-leds";
142 label = "wndap6x0:green:power";
143 gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
147 label = "wndap6x0:amber:test";
148 gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
153 label = "wndap6x0:green:activity";
154 gpios = <&GPIO0 21 GPIO_ACTIVE_HIGH>;
158 label = "wndap6x0:green:wlan2g";
159 gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
163 label = "wndap6x0:green:wlan5g";
164 gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
169 compatible = "gpio-export";
172 gpio-export,name = "wndap6x0:internal-antenna";
173 gpio-export,output = <1>;
174 gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
178 gpio-export,name = "wndap6x0:external-antenna";
179 gpio-export,output = <0>;
180 gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
185 * Input pin describing what powers the AP
187 * 1/High = 12v mains powered
189 gpio-export,name = "wndap620:mains-powered";
190 gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
195 compatible = "realtek,rtl8367b";
197 realtek,extif0 = <1 2 1 1 1 1 1 1 2>;
214 compatible = "atmel,24c04";