2 * Ubiquiti RouterStation support
4 * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6 * Copyright (C) 2008 Ubiquiti <support@ubnt.com>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published
10 * by the Free Software Foundation.
13 #include <asm/mach-ar71xx/ar71xx.h>
17 #include "dev-m25p80.h"
18 #include "dev-ap91-pci.h"
19 #include "dev-gpio-buttons.h"
20 #include "dev-pb42-pci.h"
21 #include "dev-leds-gpio.h"
24 #define UBNT_RS_GPIO_LED_RF 2
25 #define UBNT_RS_GPIO_SW4 8
27 #define UBNT_LS_SR71_GPIO_LED_D25 0
28 #define UBNT_LS_SR71_GPIO_LED_D26 1
29 #define UBNT_LS_SR71_GPIO_LED_D24 2
30 #define UBNT_LS_SR71_GPIO_LED_D23 4
31 #define UBNT_LS_SR71_GPIO_LED_D22 5
32 #define UBNT_LS_SR71_GPIO_LED_D27 6
33 #define UBNT_LS_SR71_GPIO_LED_D28 7
35 #define UBNT_M_GPIO_LED_L1 0
36 #define UBNT_M_GPIO_LED_L2 1
37 #define UBNT_M_GPIO_LED_L3 11
38 #define UBNT_M_GPIO_LED_L4 7
39 #define UBNT_M_GPIO_BTN_RESET 12
41 #define UBNT_BUTTONS_POLL_INTERVAL 20
43 static struct gpio_led ubnt_rs_leds_gpio
[] __initdata
= {
45 .name
= "ubnt:green:rf",
46 .gpio
= UBNT_RS_GPIO_LED_RF
,
51 static struct gpio_led ubnt_ls_sr71_leds_gpio
[] __initdata
= {
53 .name
= "ubnt:green:d22",
54 .gpio
= UBNT_LS_SR71_GPIO_LED_D22
,
57 .name
= "ubnt:green:d23",
58 .gpio
= UBNT_LS_SR71_GPIO_LED_D23
,
61 .name
= "ubnt:green:d24",
62 .gpio
= UBNT_LS_SR71_GPIO_LED_D24
,
65 .name
= "ubnt:red:d25",
66 .gpio
= UBNT_LS_SR71_GPIO_LED_D25
,
69 .name
= "ubnt:red:d26",
70 .gpio
= UBNT_LS_SR71_GPIO_LED_D26
,
73 .name
= "ubnt:green:d27",
74 .gpio
= UBNT_LS_SR71_GPIO_LED_D27
,
77 .name
= "ubnt:green:d28",
78 .gpio
= UBNT_LS_SR71_GPIO_LED_D28
,
83 static struct gpio_led ubnt_m_leds_gpio
[] __initdata
= {
85 .name
= "ubnt:red:link1",
86 .gpio
= UBNT_M_GPIO_LED_L1
,
89 .name
= "ubnt:orange:link2",
90 .gpio
= UBNT_M_GPIO_LED_L2
,
93 .name
= "ubnt:green:link3",
94 .gpio
= UBNT_M_GPIO_LED_L3
,
97 .name
= "ubnt:green:link4",
98 .gpio
= UBNT_M_GPIO_LED_L4
,
103 static struct gpio_button ubnt_gpio_buttons
[] __initdata
= {
109 .gpio
= UBNT_RS_GPIO_SW4
,
114 static struct gpio_button ubnt_m_gpio_buttons
[] __initdata
= {
120 .gpio
= UBNT_M_GPIO_BTN_RESET
,
125 static void __init
ubnt_generic_setup(void)
127 ar71xx_add_device_m25p80(NULL
);
129 ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL
,
130 ARRAY_SIZE(ubnt_gpio_buttons
),
137 * There is Secondary MAC address duplicate problem with some UBNT HW batches.
138 * Do not increase Secondary MAC address by 1 but do workaround
139 * with 'Locally Administrated' bit.
141 static void ubnt_init_secondary_mac(unsigned char *mac_base
)
143 ar71xx_init_mac(ar71xx_eth1_data
.mac_addr
, mac_base
, 0);
144 ar71xx_eth1_data
.mac_addr
[0] |= 0x02;
147 #define UBNT_RS_WAN_PHYMASK (1 << 20)
148 #define UBNT_RS_LAN_PHYMASK ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))
150 static void __init
ubnt_rs_setup(void)
152 ubnt_generic_setup();
154 ar71xx_add_device_mdio(~(UBNT_RS_WAN_PHYMASK
| UBNT_RS_LAN_PHYMASK
));
156 ar71xx_init_mac(ar71xx_eth0_data
.mac_addr
, ar71xx_mac_base
, 0);
157 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_MII
;
158 ar71xx_eth0_data
.phy_mask
= UBNT_RS_WAN_PHYMASK
;
160 ubnt_init_secondary_mac(ar71xx_mac_base
);
161 ar71xx_eth1_data
.phy_if_mode
= PHY_INTERFACE_MODE_RMII
;
162 ar71xx_eth1_data
.speed
= SPEED_100
;
163 ar71xx_eth1_data
.duplex
= DUPLEX_FULL
;
165 ar71xx_add_device_eth(0);
166 ar71xx_add_device_eth(1);
168 ar71xx_add_device_usb();
170 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio
),
174 MIPS_MACHINE(AR71XX_MACH_UBNT_RS
, "UBNT-RS", "Ubiquiti RouterStation",
177 #define UBNT_RSPRO_WAN_PHYMASK (1 << 4)
178 #define UBNT_RSPRO_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
180 static void __init
ubnt_rspro_setup(void)
182 ubnt_generic_setup();
184 ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK
|
185 UBNT_RSPRO_LAN_PHYMASK
));
187 ar71xx_init_mac(ar71xx_eth0_data
.mac_addr
, ar71xx_mac_base
, 0);
188 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_RGMII
;
189 ar71xx_eth0_data
.phy_mask
= UBNT_RSPRO_WAN_PHYMASK
;
191 ubnt_init_secondary_mac(ar71xx_mac_base
);
192 ar71xx_eth1_data
.phy_if_mode
= PHY_INTERFACE_MODE_RGMII
;
193 ar71xx_eth1_data
.phy_mask
= UBNT_RSPRO_LAN_PHYMASK
;
194 ar71xx_eth1_data
.speed
= SPEED_1000
;
195 ar71xx_eth1_data
.duplex
= DUPLEX_FULL
;
197 ar71xx_add_device_eth(0);
198 ar71xx_add_device_eth(1);
200 ar71xx_add_device_usb();
202 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio
),
206 MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO
, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
209 static void __init
ubnt_lsx_setup(void)
211 ubnt_generic_setup();
214 MIPS_MACHINE(AR71XX_MACH_UBNT_LSX
, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup
);
216 #define UBNT_LSSR71_PHY_MASK (1 << 1)
218 static void __init
ubnt_lssr71_setup(void)
220 ubnt_generic_setup();
222 ar71xx_add_device_mdio(~UBNT_LSSR71_PHY_MASK
);
224 ar71xx_init_mac(ar71xx_eth0_data
.mac_addr
, ar71xx_mac_base
, 0);
225 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_MII
;
226 ar71xx_eth0_data
.phy_mask
= UBNT_LSSR71_PHY_MASK
;
228 ar71xx_add_device_eth(0);
230 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio
),
231 ubnt_ls_sr71_leds_gpio
);
234 MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71
, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
237 static void __init
ubnt_m_setup(void)
239 u8
*mac1
= (u8
*) KSEG1ADDR(0x1fff0000);
240 u8
*mac2
= (u8
*) KSEG1ADDR(0x1fff0000 + ETH_ALEN
);
241 u8
*ee
= (u8
*) KSEG1ADDR(0x1fff1000);
243 ar71xx_add_device_m25p80(NULL
);
245 ar71xx_add_device_mdio(~0);
247 ar71xx_init_mac(ar71xx_eth0_data
.mac_addr
, mac1
, 0);
248 ar71xx_init_mac(ar71xx_eth1_data
.mac_addr
, mac2
, 0);
249 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_MII
;
250 ar71xx_eth0_data
.speed
= SPEED_100
;
251 ar71xx_eth0_data
.duplex
= DUPLEX_FULL
;
252 ar71xx_eth0_data
.fifo_cfg1
= 0x0010ffff;
253 ar71xx_eth0_data
.fifo_cfg2
= 0x015500aa;
254 ar71xx_eth0_data
.fifo_cfg3
= 0x01f00140;
256 ar71xx_add_device_eth(0);
258 ap91_pci_init(ee
, NULL
);
260 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio
),
263 ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL
,
264 ARRAY_SIZE(ubnt_m_gpio_buttons
),
265 ubnt_m_gpio_buttons
);
268 static void __init
ubnt_rocket_m_setup(void)
271 ar71xx_add_device_usb();
274 MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M
, "UBNT-BM", "Ubiquiti Bullet M",
276 MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M
, "UBNT-RM", "Ubiquiti Rocket M",
277 ubnt_rocket_m_setup
);
279 /* TODO detect the second ethernet port and use one
280 init function for all Ubiquiti MIMO series products */
281 static void __init
ubnt_nano_m_setup(void)
285 ar71xx_eth1_data
.phy_if_mode
= PHY_INTERFACE_MODE_RMII
;
286 ar71xx_eth1_data
.speed
= SPEED_1000
;
287 ar71xx_eth1_data
.duplex
= DUPLEX_FULL
;
288 ar71xx_eth1_data
.fifo_cfg1
= 0x0010ffff;
289 ar71xx_eth1_data
.fifo_cfg2
= 0x015500aa;
290 ar71xx_eth1_data
.fifo_cfg3
= 0x01f00140;
292 ar71xx_add_device_eth(1);
295 MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M
, "UBNT-NM", "Ubiquiti Nanostation M",
298 static struct gpio_led ubnt_unifi_leds_gpio
[] __initdata
= {
300 .name
= "ubnt:orange:dome",
304 .name
= "ubnt:green:dome",
310 static void __init
ubnt_unifi_setup(void)
312 u8
*mac
= (u8
*) KSEG1ADDR(0x1fff0000);
313 u8
*ee
= (u8
*) KSEG1ADDR(0x1fff1000);
315 ar71xx_add_device_m25p80(NULL
);
317 ar71xx_add_device_mdio(~0);
319 ar71xx_init_mac(ar71xx_eth0_data
.mac_addr
, mac
, 0);
320 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_MII
;
321 ar71xx_eth0_data
.speed
= SPEED_100
;
322 ar71xx_eth0_data
.duplex
= DUPLEX_FULL
;
324 ar71xx_add_device_eth(0);
326 ap91_pci_init(ee
, NULL
);
328 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio
),
329 ubnt_unifi_leds_gpio
);
332 MIPS_MACHINE(AR71XX_MACH_UBNT_UNIFI
, "UBNT-XM", "Ubiquiti UniFi",