2 * MikroTik RouterBOARD 91X support
4 * Copyright (C) 2015 Gabor Juhos <juhosg@openwrt.org>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
11 #include <linux/phy.h>
12 #include <linux/delay.h>
13 #include <linux/platform_device.h>
14 #include <linux/ath9k_platform.h>
15 #include <linux/mtd/mtd.h>
16 #include <linux/mtd/nand.h>
17 #include <linux/mtd/partitions.h>
18 #include <linux/spi/spi.h>
19 #include <linux/spi/flash.h>
20 #include <linux/routerboot.h>
21 #include <linux/gpio.h>
22 #include <linux/platform_data/phy-at803x.h>
23 #include <linux/version.h>
26 #include <asm/mach-ath79/ath79.h>
27 #include <asm/mach-ath79/ar71xx_regs.h>
30 #include "dev-gpio-buttons.h"
32 #include "dev-leds-gpio.h"
33 #include "dev-m25p80.h"
37 #include "machtypes.h"
39 #include "routerboot.h"
41 #define RB922_GPIO_LED_USR 12
42 #define RB922_GPIO_USB_POWER 13
43 #define RB922_GPIO_FAN_CTRL 14
44 #define RB922_GPIO_BTN_RESET 20
45 #define RB922_GPIO_NAND_NCE 23
47 #define RB922_PHY_ADDR 4
49 #define RB922_KEYS_POLL_INTERVAL 20 /* msecs */
50 #define RB922_KEYS_DEBOUNCE_INTERVAL (3 * RB922_KEYS_POLL_INTERVAL)
52 #define RB_ROUTERBOOT_OFFSET 0x0000
53 #define RB_ROUTERBOOT_MIN_SIZE 0xb000
54 #define RB_HARD_CFG_SIZE 0x1000
55 #define RB_BIOS_OFFSET 0xd000
56 #define RB_BIOS_SIZE 0x1000
57 #define RB_SOFT_CFG_OFFSET 0xf000
58 #define RB_SOFT_CFG_SIZE 0x1000
60 static struct mtd_partition rb922gs_spi_partitions
[] = {
63 .offset
= RB_ROUTERBOOT_OFFSET
,
64 .mask_flags
= MTD_WRITEABLE
,
66 .name
= "hard_config",
67 .size
= RB_HARD_CFG_SIZE
,
68 .mask_flags
= MTD_WRITEABLE
,
71 .offset
= RB_BIOS_OFFSET
,
73 .mask_flags
= MTD_WRITEABLE
,
75 .name
= "soft_config",
76 .size
= RB_SOFT_CFG_SIZE
,
80 static struct flash_platform_data rb922gs_spi_flash_data
= {
81 .parts
= rb922gs_spi_partitions
,
82 .nr_parts
= ARRAY_SIZE(rb922gs_spi_partitions
),
85 static struct gpio_led rb922gs_leds
[] __initdata
= {
87 .name
= "rb:green:user",
88 .gpio
= RB922_GPIO_LED_USR
,
93 static struct gpio_keys_button rb922gs_gpio_keys
[] __initdata
= {
95 .desc
= "Reset button",
98 .debounce_interval
= RB922_KEYS_DEBOUNCE_INTERVAL
,
99 .gpio
= RB922_GPIO_BTN_RESET
,
104 static struct at803x_platform_data rb922gs_at803x_data
= {
105 .disable_smarteee
= 1,
108 static struct mdio_board_info rb922gs_mdio0_info
[] = {
110 .bus_id
= "ag71xx-mdio.0",
111 .phy_addr
= RB922_PHY_ADDR
,
112 .platform_data
= &rb922gs_at803x_data
,
116 static void __init
rb922gs_init_partitions(const struct rb_info
*info
)
118 rb922gs_spi_partitions
[0].size
= info
->hard_cfg_offs
;
119 rb922gs_spi_partitions
[1].offset
= info
->hard_cfg_offs
;
120 rb922gs_spi_partitions
[3].offset
= info
->soft_cfg_offs
;
123 static void rb922gs_nand_select_chip(int chip_no
)
127 gpio_set_value(RB922_GPIO_NAND_NCE
, 0);
130 gpio_set_value(RB922_GPIO_NAND_NCE
, 1);
136 #if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
137 static struct nand_ecclayout rb922gs_nand_ecclayout
= {
139 .eccpos
= { 8, 9, 10, 13, 14, 15 },
141 .oobfree
= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
146 static int rb922gs_ooblayout_ecc(struct mtd_info
*mtd
, int section
,
147 struct mtd_oob_region
*oobregion
)
151 oobregion
->offset
= 8;
152 oobregion
->length
= 3;
155 oobregion
->offset
= 13;
156 oobregion
->length
= 3;
163 static int rb922gs_ooblayout_free(struct mtd_info
*mtd
, int section
,
164 struct mtd_oob_region
*oobregion
)
168 oobregion
->offset
= 0;
169 oobregion
->length
= 4;
172 oobregion
->offset
= 4;
173 oobregion
->length
= 1;
176 oobregion
->offset
= 6;
177 oobregion
->length
= 2;
180 oobregion
->offset
= 11;
181 oobregion
->length
= 2;
188 static const struct mtd_ooblayout_ops rb922gs_nand_ecclayout_ops
= {
189 .ecc
= rb922gs_ooblayout_ecc
,
190 .free
= rb922gs_ooblayout_free
,
194 static int rb922gs_nand_scan_fixup(struct mtd_info
*mtd
)
196 #if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
197 struct nand_chip
*chip
= mtd
->priv
;
200 if (mtd
->writesize
== 512) {
202 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
203 * will not be able to find the kernel that we load.
205 #if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
206 chip
->ecc
.layout
= &rb922gs_nand_ecclayout
;
208 mtd_set_ooblayout(mtd
, &rb922gs_nand_ecclayout_ops
);
215 static struct mtd_partition rb922gs_nand_partitions
[] = {
219 .size
= (256 * 1024),
220 .mask_flags
= MTD_WRITEABLE
,
224 .offset
= (256 * 1024),
225 .size
= (4 * 1024 * 1024) - (256 * 1024),
229 .offset
= MTDPART_OFS_NXTBLK
,
230 .size
= MTDPART_SIZ_FULL
,
234 static void __init
rb922gs_nand_init(void)
236 gpio_request_one(RB922_GPIO_NAND_NCE
, GPIOF_OUT_INIT_HIGH
, "NAND nCE");
238 ath79_nfc_set_scan_fixup(rb922gs_nand_scan_fixup
);
239 ath79_nfc_set_parts(rb922gs_nand_partitions
,
240 ARRAY_SIZE(rb922gs_nand_partitions
));
241 ath79_nfc_set_select_chip(rb922gs_nand_select_chip
);
242 ath79_nfc_set_swap_dma(true);
243 ath79_register_nfc();
246 static void __init
rb922gs_setup(void)
248 const struct rb_info
*info
;
251 info
= rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
255 scnprintf(buf
, sizeof(buf
), "Mikrotik RouterBOARD %s",
256 (info
->board_name
) ? info
->board_name
: "");
257 mips_set_machine_name(buf
);
259 rb922gs_init_partitions(info
);
260 ath79_register_m25p80(&rb922gs_spi_flash_data
);
264 ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN
);
266 ath79_register_mdio(0, 0x0);
268 mdiobus_register_board_info(rb922gs_mdio0_info
,
269 ARRAY_SIZE(rb922gs_mdio0_info
));
271 ath79_init_mac(ath79_eth0_data
.mac_addr
, ath79_mac_base
, 0);
272 ath79_eth0_data
.mii_bus_dev
= &ath79_mdio0_device
.dev
;
273 ath79_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_RGMII
;
274 ath79_eth0_data
.phy_mask
= BIT(RB922_PHY_ADDR
);
275 ath79_eth0_pll_data
.pll_10
= 0x81001313;
276 ath79_eth0_pll_data
.pll_100
= 0x81000101;
277 ath79_eth0_pll_data
.pll_1000
= 0x8f000000;
279 ath79_register_eth(0);
281 ath79_register_pci();
282 ath79_register_leds_gpio(-1, ARRAY_SIZE(rb922gs_leds
), rb922gs_leds
);
283 ath79_register_gpio_keys_polled(-1, RB922_KEYS_POLL_INTERVAL
,
284 ARRAY_SIZE(rb922gs_gpio_keys
),
288 * This only supports the RB911G-5HPacD board for now. For other boards
289 * more devices must be registered based on the hardware options which
290 * can be found in the hardware configuration of RouterBOOT.
294 MIPS_MACHINE_NONAME(ATH79_MACH_RB_922GS
, "922gs", rb922gs_setup
);