1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "ar7161_ruckus_gd11.dtsi"
7 /* Not used by stock firmware */
9 linux,code = <KEY_WPS_BUTTON>;
10 gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
11 debounce-interval = <60>;
15 &beamforming_2g_gpio {
16 /* Default beamforming switches configuration from stock firmware,
17 * the AP is started and for broadcast frames - all outputs high */
19 line-name = "beamforming:2g:lb0";
20 gpios = <0 GPIO_ACTIVE_LOW>;
26 line-name = "beamforming:2g:lb1";
27 gpios = <1 GPIO_ACTIVE_LOW>;
33 line-name = "beamforming:2g:lb2";
34 gpios = <2 GPIO_ACTIVE_LOW>;
40 line-name = "beamforming:2g:lb3";
41 gpios = <3 GPIO_ACTIVE_LOW>;
47 line-name = "beamforming:2g:lb4";
48 gpios = <4 GPIO_ACTIVE_LOW>;
54 line-name = "beamforming:2g:lb5";
55 gpios = <5 GPIO_ACTIVE_LOW>;
61 line-name = "beamforming:2g:lb6";
62 gpios = <6 GPIO_ACTIVE_LOW>;
68 line-name = "beamforming:2g:lb7";
69 gpios = <7 GPIO_ACTIVE_LOW>;
75 &beamforming_5g_gpio {
76 /* Default beamforming switches configuration from stock firmware,
77 * the AP is started and for broadcast frames - all outputs high */
79 line-name = "beamforming:5g:hb0";
80 gpios = <0 GPIO_ACTIVE_LOW>;
86 line-name = "beamforming:5g:hb1";
87 gpios = <1 GPIO_ACTIVE_LOW>;
93 line-name = "beamforming:5g:hb2";
94 gpios = <2 GPIO_ACTIVE_LOW>;
100 line-name = "beamforming:5g:hb3";
101 gpios = <3 GPIO_ACTIVE_LOW>;
107 line-name = "beamforming:5g:hb4";
108 gpios = <4 GPIO_ACTIVE_LOW>;
114 line-name = "beamforming:5g:hb5";
115 gpios = <5 GPIO_ACTIVE_LOW>;