1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "siemens,ws-ap3610", "qca,ar7161";
10 model = "Siemens WS-AP3610";
13 led-boot = &led_power_green;
14 led-failsafe = &led_power_red;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_red;
17 label-mac-device = ð0;
21 compatible = "fixed-clock";
23 clock-output-names = "ref";
24 clock-frequency = <40000000>;
28 compatible = "gpio-leds";
30 led_power_green: led_power_green {
31 label = "green:power";
32 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
35 led_power_red: led_power_red {
37 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
42 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
43 linux,default-trigger = "phy0tpt";
47 label = "green:wlan5";
48 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
53 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
54 linux,default-trigger = "phy1tpt";
58 label = "green:wlan2";
59 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
64 compatible = "gpio-keys";
68 linux,code = <KEY_RESTART>;
69 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
85 phy0: ethernet-phy@0 {
87 * When the compatible-is missing, PHY autodetection
88 * is performed, but the PHY-ID reads all 0xff.
90 * Linux does not create the device in this case,
91 * and the reset is never even de-asserted.
93 compatible = "ethernet-phy-id0143.bca2",
94 "ethernet-phy-ieee802.3-c22";
99 reset-assert-us = <10000>;
100 reset-deassert-us = <10000>;
107 phy-mode = "rgmii-id";
108 phy-handle = <&phy0>;
115 compatible = "jedec,spi-nor";
117 spi-max-frequency = <25000000>;
120 compatible = "fixed-partitions";
121 #address-cells = <1>;
131 label = "u-boot-bak";
132 reg = <0x40000 0x40000>;
137 compatible = "denx,uimage";
139 reg = <0x80000 0xe00000>;
144 reg = <0xe80000 0x40000>;
150 reg = <0xec0000 0x40000>;
156 reg = <0xf00000 0x40000>;
162 reg = <0xf40000 0x40000>;
168 reg = <0xf80000 0x40000>;
174 reg = <0xfc0000 0x40000>;