1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "siemens,ws-ap3610", "qca,ar7161";
10 model = "Siemens WS-AP3610";
13 led-boot = &led_power_green;
14 led-failsafe = &led_power_red;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_red;
17 label-mac-device = ð0;
21 compatible = "gpio-leds";
23 led_power_green: led_power_green {
24 label = "green:power";
25 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
28 led_power_red: led_power_red {
30 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
35 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
36 linux,default-trigger = "phy0tpt";
40 label = "green:wlan5";
41 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
46 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
47 linux,default-trigger = "phy1tpt";
51 label = "green:wlan2";
52 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
57 compatible = "gpio-keys";
61 linux,code = <KEY_RESTART>;
62 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
74 phy0: ethernet-phy@0 {
76 * When the compatible-is missing, PHY autodetection
77 * is performed, but the PHY-ID reads all 0xff.
79 * Linux does not create the device in this case,
80 * and the reset is never even de-asserted.
82 compatible = "ethernet-phy-id0143.bca2",
83 "ethernet-phy-ieee802.3-c22";
88 reset-assert-us = <10000>;
89 reset-deassert-us = <10000>;
96 phy-mode = "rgmii-id";
104 compatible = "jedec,spi-nor";
106 spi-max-frequency = <50000000>;
109 compatible = "fixed-partitions";
110 #address-cells = <1>;
120 label = "u-boot-bak";
121 reg = <0x40000 0x40000>;
126 compatible = "denx,uimage";
128 reg = <0x80000 0xe00000>;
133 reg = <0xe80000 0x40000>;
139 reg = <0xec0000 0x40000>;
145 reg = <0xf00000 0x40000>;
151 reg = <0xf40000 0x40000>;
157 reg = <0xf80000 0x40000>;
163 reg = <0xfc0000 0x40000>;