target/linux/ath79/dts/ar7241.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar724x.dtsi"
   4
   5 / {
   6         usb_phy: usb-phy {
   7                 compatible = "qca,ar7200-usb-phy";
   8
   9                 reset-names = "usb-phy", "usb-suspend-override";
  10                 resets = <&rst 4>, <&rst 3>;
  11
  12                 #phy-cells = <0>;
  13
  14                 status = "disabled";
  15         };
  16 };
  17
  18 &gpio {
  19         ngpios = <20>;
  20 };
  21
  22 &ahb {
  23         usb: usb@1b000000 {
  24                 compatible = "generic-ehci";
  25                 reg = <0x1b000000 0x1000>;
  26
  27                 interrupts = <3>;
  28
  29                 resets = <&rst 5>;
  30                 reset-names = "usb-host";
  31
  32                 has-transaction-translator;
  33                 caps-offset = <0x100>;
  34
  35                 phy-names = "usb-phy";
  36                 phys = <&usb_phy>;
  37
  38                 status = "disabled";
  39
  40                 #address-cells = <1>;
  41                 #size-cells = <0>;
  42         };
  43 };
  44
  45 &eth0 {
  46         compatible = "qca,ar7241-eth", "syscon";
  47
  48         pll-data = <0x00110000 0x00001099 0x00991099>;
  49
  50         resets = <&rst 9>;
  51         reset-names = "mac";
  52         phy-handle = <&swphy4>;
  53 };
  54
  55 &mdio1 {
  56         status = "okay";
  57
  58         resets = <&rst 23>;
  59         reset-names = "mdio";
  60         builtin-switch;
  61
  62         builtin_switch: switch0@1f {
  63                 compatible = "qca,ar7240sw";
  64
  65                 reg = <0x1f>;
  66                 resets = <&rst 8>;
  67                 reset-names = "switch";
  68                 qca,mib-poll-interval = <500>;
  69
  70                 mdio-bus {
  71                         #address-cells = <1>;
  72                         #size-cells = <0>;
  73
  74                         swphy4: ethernet-phy@4 {
  75                                 reg = <4>;
  76                                 phy-mode = "mii";
  77                         };
  78                 };
  79         };
  80 };
  81
  82 &eth1 {
  83         status = "okay";
  84
  85         compatible = "qca,ar7241-eth", "syscon";
  86
  87         pll-data = <0x00110000 0x00001099 0x00991099>;
  88
  89         resets = <&rst 13>;
  90         reset-names = "mac";
  91
  92         phy-mode = "gmii";
  93
  94         fixed-link {
  95                 speed = <1000>;
  96                 full-duplex;
  97         };
  98 };