1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "iodata,etg3-r", "qca,ar9344";
10 model = "I-O DATA ETG3-R";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 compatible = "gpio-leds";
23 label = "green:power";
24 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
29 label = "green:notification";
30 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
35 compatible = "gpio-keys";
39 linux,code = <KEY_RESTART>;
40 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
41 debounce-interval = <60>;
47 clock-frequency = <40000000>;
54 compatible = "jedec,spi-nor";
56 spi-max-frequency = <25000000>;
59 compatible = "fixed-partitions";
65 reg = <0x000000 0x040000>;
71 reg = <0x040000 0x010000>;
75 compatible = "denx,uimage";
77 reg = <0x050000 0x780000>;
82 reg = <0x07d0000 0x10000>;
88 reg = <0x07e0000 0x10000>;
94 reg = <0x7f0000 0x010000>;
104 phy0: ethernet-phy@0 {
108 qca,ar8327-initvals = <
109 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
110 0x50 0xffb7ffb7 /* LED_CTRL0 */
111 0x54 0xffb7ffb7 /* LED_CTRL1 */
112 0x58 0xffb7ffb7 /* LED_CTRL2 */
113 0x5c 0x03ffff00 /* LED_CTRL3 */
114 0x7c 0x0000007e /* PORT0_STATUS */
122 pll-data = <0x0e000000 0x00000101 0x00001616>;
125 phy-handle = <&phy0>;