target/linux/ath79/dts/ar9342_ubnt_xw.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar9344.dtsi"
   7
   8 / {
   9         compatible = "ubnt,xw", "qca,ar9342";
  10         model = "Ubiquiti Networks XW board";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 link1 {
  16                         label = "ubnt:red:link1";
  17                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 link2 {
  21                         label = "ubnt:orange:link2";
  22                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 link3 {
  26                         label = "ubnt:green:link3";
  27                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 link4 {
  31                         label = "ubnt:green:link4";
  32                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         keys {
  37                 compatible = "gpio-keys";
  38
  39                 reset {
  40                         label = "Reset button";
  41                         linux,code = <KEY_RESTART>;
  42                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  43                         debounce-interval = <60>;
  44                 };
  45         };
  46 };
  47
  48 &ref {
  49         clock-frequency = <40000000>;
  50 };
  51
  52 &uart {
  53         status = "okay";
  54 };
  55
  56 &gpio {
  57         status = "okay";
  58 };
  59
  60 &spi {
  61         status = "okay";
  62         num-cs = <1>;
  63
  64         flash@0 {
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <25000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "u-boot";
  76                                 reg = <0x000000 0x040000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@40000 {
  81                                 label = "u-boot-env";
  82                                 reg = <0x040000 0x010000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@50000 {
  87                                 compatible = "denx,uimage";
  88                                 label = "firmware";
  89                                 reg = <0x050000 0x760000>;
  90                         };
  91
  92                         partition@fb0000 {
  93                                 label = "cfg";
  94                                 reg = <0x7b0000 0x040000>;
  95                                 read-only;
  96                         };
  97
  98                         eeprom: partition@ff0000 {
  99                                 label = "EEPROM";
 100                                 reg = <0x7f0000 0x010000>;
 101                                 read-only;
 102                         };
 103                 };
 104         };
 105 };
 106
 107 &wmac {
 108         status = "okay";
 109
 110         mtd-cal-data = <&eeprom 0x1000>;
 111         mtd-mac-address = <&eeprom 0x1002>;
 112 };