1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca953x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "compex,wpj531-16m", "qca,qca9531";
10 model = "Compex WPJ531 (16MB flash)";
13 label-mac-device = ð0;
15 led-failsafe = &led_sig4;
16 led-running = &led_sig4;
17 led-upgrade = &led_sig4;
21 compatible = "gpio-beeper";
22 gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
26 compatible = "gpio-keys";
30 linux,code = <KEY_RESTART>;
31 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
36 compatible = "gpio-leds";
38 pinctrl-names = "default";
39 pinctrl-0 = <&pinmux_led_eth_pins>;
43 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
47 label = "yellow:sig2";
48 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
53 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
58 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
64 pinmux_led_eth_pins: pinmux_led_eth_pins {
65 pinctrl-single,bits = <0x8 0x2b000000 0xff000000>, <0xc 0x00002d00 0x0000ff00>;
73 compatible = "jedec,spi-nor";
75 spi-max-frequency = <25000000>;
78 compatible = "fixed-partitions";
84 reg = <0x000000 0x030000>;
90 reg = <0x030000 0xfc0000>;
91 compatible = "denx,uimage";
94 art: partition@ff0000 {
96 reg = <0xff0000 0x010000>;
106 phy-handle = <&swphy4>;
108 mtd-mac-address = <&uboot 0x2e010>;
112 mtd-mac-address = <&uboot 0x2e018>;
118 mtd-cal-data = <&art 0x1000>;
125 compatible = "pci168c,003c";
126 reg = <0x0000 0 0 0 0>;