3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
6 #include "qca953x.dtsi"
10 led-boot = &led_status;
11 led-failsafe = &led_status;
12 led-running = &led_status;
13 led-upgrade = &led_status;
14 label-mac-device = ð0;
18 compatible = "gpio-keys-polled";
20 pinctrl-names = "default";
21 pinctrl-0 = <&jtag_disable_pins>;
25 linux,code = <KEY_RESTART>;
26 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
30 label = "button right";
32 gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
36 label = "button left";
38 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
43 compatible = "gpio-leds";
45 // Colors from non-Lite versions
48 label = "gl-ar300m:green:status";
49 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
53 label = "gl-ar300m:green:lan";
54 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
58 label = "gl-ar300m:red:wlan";
59 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
60 linux,default-trigger = "phy0tpt";
74 compatible = "winbond,w25q128", "jedec,spi-nor";
76 spi-max-frequency = <25000000>;
79 compatible = "fixed-partitions";
85 reg = <0x000000 0x040000>;
91 reg = <0x040000 0x010000>;
95 compatible = "denx,uimage";
97 reg = <0x050000 0xfa0000>;
102 reg = <0xff0000 0x010000>;
114 #address-cells = <1>;
125 mtd-mac-address = <&art 0x0>;
126 phy-handle = <&swphy4>;
130 mtd-mac-address = <&art 0x0>;
131 mtd-mac-address-increment = <1>;
136 mtd-cal-data = <&art 0x1000>;
137 mtd-mac-address = <&art 0x1002>;