1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca953x.dtsi"
10 compatible = "telco,t1", "qca,qca9531";
14 label-mac-device = ð0;
15 led-boot = &led_rssi0;
16 led-failsafe = &led_rssi0;
17 led-running = &led_rssi0;
18 led-upgrade = &led_rssi0;
22 compatible = "gpio-keys";
26 linux,code = <KEY_RESTART>;
27 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
32 compatible = "gpio-leds";
33 pinctrl-names = "default";
34 pinctrl-0 = <&jtag_disable_pins &pinmux_led_wan_pin>;
37 label = "t1:blue:wan";
38 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
42 label = "t1:blue:lan";
43 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
47 label = "t1:blue:wlan";
48 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
49 linux,default-trigger = "phy0tpt";
53 label = "t1:blue:rssi0";
54 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
58 label = "t1:blue:rssi1";
59 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
63 label = "t1:blue:rssi2";
64 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
86 compatible = "jedec,spi-nor";
88 spi-max-frequency = <25000000>;
91 compatible = "fixed-partitions";
97 reg = <0x000000 0x010000>;
101 art: partition@10000 {
103 reg = <0x010000 0x010000>;
108 compatible = "denx,uimage";
110 reg = <0x020000 0xfd0000>;
114 label = "art-backup";
115 reg = <0xff0000 0x010000>;
125 mtd-mac-address = <&art 0x0>;
127 phy-handle = <&swphy4>;
131 mtd-mac-address = <&art 0x6>;
137 mtd-cal-data = <&art 0x1000>;
141 pinmux_led_wan_pin: led_wan_pin {
142 pinctrl-single,bits = <0x4 0x0 0xff>;